24mm M8 Locking Screw Hex Socket For Caliper Use, 17.1mm Diameter - Teknik Makina

Q: What thread standard does this screw use?

The screw uses an M8 metric thread, specified for the TC056TM locking screw by Teknik Cutting Tools

Q: Is this part suitable for precision calipers?

Yes, the locking screw TC056TM is intended for use with precision calipers and similar measuring instruments where a compact, reliable clamp is required

Q: Which tool is needed to tighten the screw?

Tightening and adjustment require a 5 mm Allen key, allowing straightforward maintenance without specialised equipment

Q: What are the dimensions of the head and overall length?

The head diameter is 17.1 mm and the total length is 24 mm, dimensions chosen for secure engagement in confined measuring assemblies

Q: Can this screw be used as a direct replacement for other locking screws?

Where thread (M8), head clearance and length match, the TC056TM can be used as a replacement; compatibility should be confirmed against the original part’s dimensions

Liegende Verriegelungsschraube auf durchsichtigem Hintergrund. Mit Gewinde M8.

Picture similar to product

€3.81

Accessory Items

5mm Allen Key Hex Wrench, Steel - Teknik Makina

€8.39

Product number: TC056TM

Product information "24mm M8 Locking Screw Hex Socket For Caliper Use, 17.1mm Diameter - Teknik Makina"

Take advantage of the secure clamping provided by the M8 thread and the compact 17.1 mm head, which together ensure stable retention in precision measuring tools; combine this with a short 24 mm overall length for tight installation spaces, and order the part directly via Metav Werkzeuge or consult their advisors for application advice.

Locking screw TC056TM – M8 thread, 17.1 mm head (Teknik Makina)

Locking screw TC056TM designed for precision calipers and similar measuring instruments, providing compact, reproducible clamping where space and repeatability matter

M8 thread for secure fastening
Ø 17.1 mm head diameter
Total length 24 mm
Compatible with 5 mm Allen key

Secure clamping for repeatable measurement results

The M8 thread and substantial head diameter deliver a compact yet reliable clamping point that reduces play in measuring assemblies. This fixing element is intended for use in measurement and workshop settings where repeatability and positional stability are essential; by replacing worn fasteners with a standardized threaded component, measurement scatter is minimised and calibration intervals are easier to maintain. The component’s geometry supports even torque transmission, helping to avoid jaw misalignment on precision callipers and similar instruments.

Fast adjustment and straightforward maintenance

Adjustment is performed with a common 5 mm Allen key, allowing quick installation and tightening without specialised tooling. The short 24 mm length keeps the screw profile low, which benefits fixtures with confined clearance. Lightweight construction contributes to ease of handling during replacement and reduces additional load on delicate measuring heads. For workshops that require rapid on-bench swaps, this screw offers a pragmatic combination of accessibility and compact design that keeps downtime to a minimum.

Compatibility and workshop integration

As a standardised M8 fixing, this locking screw integrates easily into established maintenance routines and pairs with many precision calipers and gauging fixtures. The 17.1 mm head provides positive engagement for adjustment tools while remaining small enough for dense assemblies. When combined with structured inventory management from a reliable supplier, the part supports uninterrupted production and measurement workflows. For procurement, using standardised fasteners reduces part variety and simplifies spare-part logistics across measurement equipment fleets.

For reliable clamping in precision measurement tools, request the Teknik Cutting Tools locking screw TC056TM from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for procurement guidance or technical clarification at info@metav-werkzeuge.com or +49 2822 7131930

Technical Data

Article number: TC056TM
Thread: M8
Head diameter: 17.1 mm
Total length: 24 mm
Weight: 0.1 kg

Facts

Thread size: M8
Head diameter: 17.1 mm
Overall length: 24 mm
Mass: 0.1 kg

Special features

Designed for precision calipers and measuring fixtures
Adjustment with 5 mm Allen key
Compact profile for restricted clearance assemblies

FAQ

What thread standard does this screw use? The screw uses an M8 thread, which is the metric standard specified for the TC056TM locking screw by Teknik Cutting Tools.

Is this part suitable for precision calipers? Yes, the locking screw TC056TM is intended for use with precision calipers and similar measuring instruments where a compact, reliable clamp is required.

Which tool is needed to tighten the screw? Tightening and adjustment require a 5 mm Allen key, allowing straightforward maintenance without specialised equipment.

What are the dimensions of the head and overall length? The head diameter is 17.1 mm and the total length is 24 mm, dimensions selected for secure engagement in confined measuring assemblies.

Can this screw be used as a direct replacement for other locking screws? Where the thread (M8), head clearance and length match, the TC056TM can be used as a replacement; compatibility should be confirmed against the original part’s dimensions.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Properties "24mm M8 Locking Screw Hex Socket For Caliper Use, 17.1mm Diameter - Teknik Makina"

Designation:	Verriegelungsschraube
Diameter-1:	17,1mm

Accessory Items

5mm Allen Key Hex Wrench, Steel - Teknik Makina

Take advantage of a compact, reliable tool that combines 5 mm accuracy with easy handling to keep assembly and maintenance tasks moving smoothly; lightweight construction at 0.1 kg reduces operator fatigue and supports fast, repeatable tightening. Order directly via Metav Werkzeuge or consult our team for specific workshop applications. Allen key (5 mm) — compact hex key for workshop fastening, Teknik Makina The Allen key is a compact hex wrench designed for precise fastening in assembly, maintenance and general workshop applications Compact 5 mm hex key for precise fastening Lightweight: only 0.1 kg for easy handling Robust workshop tool by Teknik Makina Precision fastening where space is limited The compact 5 mm shaft and hex profile enable accurate torque transfer for small fasteners, making this tool suitable for confined or recessed fixings. Its minimal profile supports access to tight joints while the standard hex geometry ensures consistent contact with the fastener head, reducing cam‑out and rounding. The emphasis is on precision and repeatability, so routine assembly and maintenance cycles remain efficient and traceable with every twist. Practical design for efficient workshop use A lightweight tool at 0.1 kg, this hex key reduces hand fatigue during repetitive operations and speeds up small‑part assembly tasks. The simple form factor eliminates unnecessary bulk on the workbench and integrates well with existing tool sets. By favouring straightforward geometry over complex mechanisms, the tool promotes a low‑maintenance workflow that aligns with lean workshop practices and reliable day‑to‑day performance. Easy handling, storage and trusted provenance The compact profile supports tidy storage and rapid retrieval from tool boards or racks, improving process flow between jobs. Supplied under the Teknik Makina label, this hex key benefits from a clear, production‑orientated design suited to industrial and trade environments. The focus remains on dependable operation and practical usability, providing craftsmen and technicians with a straightforward, compact design that complements precision tool collections. Consider the Teknik Cutting Tools 5 mm Allen key for consistent small‑fastener work — contact Metav Werkzeuge for availability and application advice Technical Data Article number: 5ALLENTM Designation: Allen key Size indication: 5 Facts Weight: 0.1 kg ECLASS: 21189290 SKU: 5ALLENTM Special features Tool type: Allen key (hex key) Brand: Teknik Makina Compact form for confined spaces FAQ What size is the tool and what does it fit? The tool is a 5 mm Allen key; it fits fasteners with a 5 mm internal hex profile and is intended for small assembly and maintenance tasks. Is the Allen key suitable for workshop and industrial applications? Yes, the 5 mm hex key from Teknik Makina is designed for workshop use and repetitive fastening where a compact, reliable hex wrench is required. How heavy is the tool and does it aid repetitive work? Weighing approximately 0.1 kg, the Allen key reduces hand fatigue during repetitive operations while maintaining secure contact with the fastener. Can the 5ALLENTM be integrated into a standard tool set? The 5ALLENTM Allen key is compact and designed for easy storage on tool boards or in sets, making it straightforward to add to existing collections. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

€8.39