13.4mm Locking Screw M6, Allen Key 2.5 Compatible - Teknik Makina

Q: Which tool is required for adjustment?

Adjustment requires a 2.5 mm Allen key, as specified for the component.

Seitlich liegende Verriegelungsschraube auf weißem Hintergrund.

Picture similar to product

€6.15

Accessory Items

2.5mm Allen Key Hex Wrench, Chrome Plated - Teknik Makina

€8.39

Product number: TH613TM

Product information "13.4mm Locking Screw M6, Allen Key 2.5 Compatible - Teknik Makina"

Take advantage of secure, repeatable clamping with a compact M6 thread and a short total length for minimal interference; order the component directly via Metav Werkzeuge or consult our specialists for compatibility advice.

Locking screw TH613TM — M6 thread, 13.4 mm total length (Teknik Makina)

A locking screw engineered for precision calipers and other measuring instruments, designed for reliable clamping and simple adjustment with a 2.5 mm Allen key

M6 threaded connection
Compact 13.4 mm total length
Compatible with 2.5 mm Allen key

Secure clamping for repeatable measurements

The compact design centres on a M6 thread that delivers consistent axial force without adding bulk to the measuring setup. By fixing the sliding scale reliably, the component improves repeatability and reduces position drift during routine checks. This contributes to fewer re-measurements and clearer traceability in quality control protocols, turning a small mechanical part into a measurable benefit for production reliability.

Straightforward adjustment and low-maintenance handling

Adjustment is simplified by the 2.5 mm Allen key compatibility: installation and removal are quick, safe and require only standard workshop tooling. The 13.4 mm total length limits overhang and avoids interference with jaws or depth rods, while the lightweight construction keeps added mass to a minimum. Together, these features shorten maintenance intervals and make replacements faster, supporting efficient machine uptime and operator convenience.

Suited to precision calipers and compact instruments

Designed for use on precision calipers, the component integrates neatly into measuring assemblies where space and accuracy matter. The small footprint and locking capability help secure settings during transport or frequent handling, which is particularly useful in busy inspection bays and mobile measurement tasks. The part’s compatibility with common Allen keys ensures broad applicability across various dial and digital caliper models.

Practical impact on workflow and measurement quality

As a simple upgrade to an existing measuring instrument, the locking screw contributes directly to process stability: fewer slips, fewer resets and clearer pass/fail decisions. The result is an operational uplift that is both pragmatic and measurable — less downtime, quicker inspections and a lower risk of accidental zero shifts. For workshops aiming to streamline inspection steps, this component is a compact but effective choice.

For secure and compatible components, contact Metav Werkzeuge to request the Teknik Cutting Tools locking screw (TH613TM) and receive tailored advice and supply from our Emmerich centre — call +49 2822 7131930 or email info@metav-werkzeuge.com

Technical Data

Article number: TH613TM
Name: Locking screw (Verriegelungsschraube)
Manufacturer: Teknik Makina

Core data

Thread: M6
Total length: 13.4 mm
Weight: 0.1 kg

Special features

Compatible with 2.5 mm Allen key for adjustment
Intended for use on precision calipers
Simple locking function for secure measurements

FAQ

What thread size does the locking screw use?
The locking screw uses an M6 thread for secure fastening and standard compatibility.

Which tool is required for adjustment?
Adjustment requires a 2.5 mm Allen key, as stated for the component.

Is this component suitable for calipers?
Yes. The TH613TM locking screw is intended for precision calipers and similar measuring instruments.

What are the dimensions and weight of the part?
Total length is 13.4 mm and the weight is 0.1 kg for the TH613TM locking screw.

Can the screw be used on other measuring tools with M6 fittings?
It can be used wherever an M6 locking screw with a compact profile and 2.5 mm Allen adjustment is appropriate, though it was designed with calipers in mind.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Properties "13.4mm Locking Screw M6, Allen Key 2.5 Compatible - Teknik Makina"

Designation:	Verriegelungsschraube
Diameter-1:	mm

Accessory Items

2.5mm Allen Key Hex Wrench, Chrome Plated - Teknik Makina

Compact design with exact fit for 2.5 mm hex fasteners and simple identification via SKU 25ALLENTM — combine precision, easy handling and reliable supply. Order directly through Metav Werkzeuge or consult our specialists for tailored advice. Allen key — 2.5 mm hex, Teknik Makina A Allen key for precise tightening and loosening of 2.5 mm hex fasteners, intended for routine workshop and maintenance tasks. Allen key 2.5 mm hex Lightweight at 0.1 kg SKU 25ALLENTM for ordering Consistent, measurable fit for small hex fasteners A compact hand tool that gives a defined contact geometry for 2.5 mm hex sockets, ensuring a snug fit and reduced cam‑out. The clear specification of 2.5 mm allows straightforward selection for metric assemblies and repeatable torque application with compatible tools. This factual clarity supports efficient procurement and reduces assembly errors, making the item a pragmatic choice where exact hex sizing is required. Minimal weight and simple handling for everyday use With a listed weight of 0.1 kg, the tool remains easy to handle and store without adding bulk to a technician’s kit. The low mass supports swift manual operation during repetitive tasks and keeps toolboxes lighter on the workbench. The emphasis on lightweight handling translates into reduced user fatigue during frequent adjustments, which is a tangible productivity benefit in fast‑paced workshop environments. Traceable ordering and inventory management The product is identifiable by SKU 25ALLENTM, enabling direct ordering and simplified stock control. Clear article identification speeds up reordering cycles and integrates with purchasing systems. Reliable itemisation supports predictable supply from established vendors and helps avoid downtime caused by unclear tool specification — a rational advantage for procurement teams seeking continuity. Reliability through clear specification and supplier proximity Sourced from Teknik Makina and offered via Metav’s distribution, the tool benefits from a transparent supply chain and a focus on accessible precision. The concise technical definition and straightforward classification make it easier to assess suitability for tasks that call for metric hex keys. Combined with Metav’s distribution centre in Emmerich, the arrangement offers practical reassurance about availability and consistency. For enquiries about Teknik Makina Allen keys or to request ordering information via Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specialist guidance and fast fulfilment Technical data Article number: 25ALLENTM Name: Allen key Brand: Teknik Makina Dimensions & weight Size: 2.5 mm hex Weight: 0.1 kg ECLASS: 21189290 Features & suitability Product type: Allen key (hex key) Intended use: hex fastener operations Identification: SKU 25ALLENTM FAQ What size hex does this tool fit? The tool is specified for 2.5 mm hex fasteners and is identified as an Allen key for that size. Which manufacturer supplies this Allen key? This Allen key is supplied by Teknik Makina and stocked under SKU 25ALLENTM for ordering and inventory purposes. Is the weight relevant for daily use? Yes — the listed weight of 0.1 kg indicates a lightweight hand tool suitable for frequent manual use without significant handling fatigue. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

€8.39