50-82mm Cartridge For Boring Tool, CCMT 09T3 Compatible, Torx T15 - Teknik Makina
€69.00
Product information "50-82mm Cartridge For Boring Tool, CCMT 09T3 Compatible, Torx T15 - Teknik Makina"
Benefit from precise diameter adaptation and secure Torx fastening for a faster, more reliable boring process. The combination of compatibility with CCMT 09T3 inserts and a broad 50–82 mm range supports flexible tool setups and reduced downtime. Order the cartridge directly via Metav Werkzeuge or consult the specialists for application advice.
Cartridge 50–82 mm for Boring Tool (THB08TM) – Teknik Makina
The Cartridge 50–82 mm for Boring Tool is a precision adapter designed for use in boring tool sets to accommodate diameters from 50 to 82 mm within turning and internal machining applications
- Cartridge for boring tool sets 50–82 mm range
- Compatible with CCMT 09T3 indexable inserts
- Torx T15 fastening with M3.5x8.5 screws
- SKU THB08TM for quick identification
Faster setup through precise diameter adaptation
The cartridge delivers a reliable way to adapt boring holders across a wide diameter span without time-consuming custom work. By covering the 50–82 mm range, the adapter reduces the need for multiple dedicated holders and simplifies inventory. This consolidation improves throughput and supports more efficient job planning, while the precise fit helps maintain concentricity and consistent workpiece quality.
Secure clamping and straightforward insert compatibility
Designed to accept CCMT 09T3 indexable inserts, the cartridge enables simple cutting-edge replacement with established carbide grades. The clamping is secured by a Torx T15 drive and M3.5x8.5 screws, ensuring firm retention under machining loads and minimising the risk of loosening during operation. Clear mechanical fixing translates into stable cutting conditions and predictable surface finishes for internal turning and boring operations.
Practical benefits for workshops and small-series production
The cartridge is particularly suited to machine shops and maintenance workshops that require flexibility and short changeover times. The compact adapter supports quick swapping between toolheads and guarantees repeatable positioning, which is valuable for small-series production and repair work. Combined with a partner such as Metav, this component helps streamline the tool park and maintain supply reliability for everyday manufacturing demands.
For application guidance or to arrange a supply from Metav Werkzeuge, contact our consultants who can advise on compatibility and delivery from the Emmerich stock.
Technical data
- Article number: THB08TM
- Description: Cartridge 50–82 mm for Boring Tool
- Manufacturer: Teknik Makina
- eClass: 21041590
Facts
- Diameter range: 50–82 mm
- Torx key size: T15
- Torx screw: M3.5x8.5
- Suitable inserts: CCMT 09T3
Special features
- Designed for use in boring tool sets
- Indexable insert compatibility
- Secure Torx fastening system
FAQ
Which insert type fits this cartridge?
The cartridge accepts CCMT 09T3 indexable inserts and is configured for their standard seating and clamping.
What diameter range does the cartridge cover?
The adapter covers a diameter range of 50–82 mm for internal boring operations.
What fastening system is used for the tool clamping?
Clamping is secured via a Torx T15 drive using M3.5x8.5 screws for reliable retention.
Is this cartridge suitable for general workshop use?
Yes, the cartridge is intended for machine shops and workshops requiring flexibility and quick tool changes.
What is the product SKU for ordering?
The SKU for ordering and identification is THB08TM.
Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
| Designation: | Ausdrehwerkzeug Satz |
|---|---|
| Diameter-1: | mm |
Zubehör
Compact, space-saving fastening with a Torx drive and an M3.5 thread for reliable assemblies; combine secure engagement and precise dimensions for efficient production. Order this fastener directly via Metav Werkzeuge or consult our specialists for compatibility checks. Torx screw TC067TM — M3.5 thread, 8.5 mm length by Teknik Makina Torx screw TC067TM for compact mechanical assemblies, designed to deliver secure drive engagement and precise thread compatibility in confined spaces Torx drive for secure engagement Nominal diameter 5.3 mm Thread M3.5 standard Compact 8.5 mm total length Consistent torque transfer for dependable assembly results The Torx geometry is engineered to reduce cam‑out and provide improved torque transmission compared with slotted or Phillips drives. In practice this means assembly processes become more reliable and repeatable: a stable driver engagement reduces slip and wear on both tool and fastener; the combination of the Torx interface and the specified T15 matching key ensures a controlled transfer of force. For engineering teams this translates into fewer reworks and smoother production flow when fitting small components. Precision dimensions that save space and simplify design With a nominal diameter of 5.3 mm and a total length of 8.5 mm, the fastener is suitable for tight assemblies where clearance is limited. The external thread designated M3.5 conforms to standard metric sizing, enabling predictable mating with corresponding tapped holes or inserts. Designers benefit from the compact profile when specifying fastenings for enclosures, panels or small brackets, since predictable thread engagement and controlled head geometry support consistent clamping without excessive protrusion. Workshop efficiency and straightforward inventory management As a standardised metric fastener, the item streamlines procurement and tool selection across routine maintenance and assembly tasks. The relatively small mass (0.1 kg stated) aids logistics planning for storage and shipping bundles, while compatibility with the T15 driver reduces the number of specialised tools required on the workbench. Supplied under the Teknik Makina designation, the component is intended as a practical choice for small‑part assembly where standardisation and accessibility are priorities. Proven supply and service through a trusted partner Sourcing through Metav aligns the technical benefits of the fastener with dependable distribution and quality control. Metav’s role as a “quality filter” for the European market means buyers gain access to consistent stock, product verification and a broad range of workshop supplies alongside measurement and tooling solutions. This combination of a reliable feed of standard parts and technical consultancy supports long‑term operational stability in manufacturing and maintenance settings. For availability and order details of the Teknik Makina Torx screw TC067TM, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com for precise product information and stock status Technical Data Article number: TC067TM Manufacturer: Teknik Makina eCl@ss: 21189290 Core technical data Weight: 0.1 kg Diameter: 5.3 mm Thread: M3.5 Total length: 8.5 mm Head angle: 60° Features Drive type: Torx Suitable key: T15 Brand: Teknik Makina FAQ What driver fits this screw most effectively? The screw is designed for a Torx drive and is compatible with a T15 Torx key for optimal engagement. Which thread standard does the fastener use? This fastener uses an M3.5 metric thread suitable for corresponding tapped holes and standard inserts. What are the primary dimensions to consider during design? Key dimensions are a nominal diameter of 5.3 mm, a total length of 8.5 mm and a head angle of 60°, which help define clearance and engagement depth. Is this part a Teknik Makina product and what is the SKU? Yes — the item is listed under Teknik Makina and is supplied as TC067TM. For which kinds of assemblies is this fastener appropriate? The component is intended for compact mechanical assemblies and small fittings where a secure Torx drive and short overall length are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts CCMT 09T304 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT09T304-Steel ISO-Code: CCMT09T304 Usage for: Steel Material: cemented carbide Form: rhombic Usable to the work on: Stahl Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT-09T304-Stahl-MetavCUT 40END