80mm Kartusche 80-130mm For Boring Tool, T15 Torx, M3.5x8.5 Screw - Teknik Makina
€76.00
Product information "80mm Kartusche 80-130mm For Boring Tool, T15 Torx, M3.5x8.5 Screw - Teknik Makina"
Combine the adjustable 80–130 mm clamping range with proven compatibility for CCMT 09T3 inserts and secure Torx fastening to streamline internal turning operations; order the cartridge directly via Metav Werkzeuge or consult our advisers for application support.
Cartridge 80-130mm for Boring Tool (THB09TM) — Teknik Makina, compatible with CCMT 09T3
The Cartridge 80-130mm for Boring Tool is a precision mounting component for internal boring and turning applications, engineered to deliver consistent seating and repeatable results in production and workshop environments
- Adjustable 80–130 mm diameter range
- Compatible with CCMT 09T3 inserts
- Torx T15 fastening, M3.5x8.5 screw
Consistent internal machining through a wide adjustable range
The mounting unit offers an adjustable 80–130 mm clamping range that removes the need for frequent holder swaps on varied bore diameters. This flexibility shortens set-up times and supports a steady production flow by allowing one holder to cover multiple shaft sizes. The design emphasises precision and repeatability: controlled clamping and accurate insert positioning reduce radial runout and the risk of rework. For workshops aiming to optimise throughput, the cartridge acts as a reliable element within a modular boring system.
Secure fastening and simple serviceability for less downtime
Fastening is achieved via a Torx T15 drive and a M3.5x8.5 screw, providing a robust fastening method that resists loosening under cutting loads. The clear screw specification ensures compatible spares and straightforward maintenance routines. The insert pocket accepts standard brazed and indexable tools, so insert changes are quick and toolholding integrity is maintained. Reduced maintenance complexity translates directly into lower process interruptions and predictable toollife management in everyday shop-floor use.
Compatible insert system that simplifies tooling logistics
Designed for use with CCMT 09T3 indexable inserts, the holder minimises inventory pressure by standardising on a widely available insert format; this compatibility supports lean stocking and straightforward replacement cycles. The cartridge is intended for integration into a boring tool set, enabling modular upgrades without complete holder replacement. Built under Teknik Makina manufacturing guidelines, the component balances practical workshop demands with engineering robustness, helping maintain consistent surface finish and dimensional control in internal turning tasks
For application advice or to secure the Cartridge 80-130mm from Teknik Makina (SKU THB09TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored support and rapid supply
Technical data
- Article number / SKU: THB09TM
- Manufacturer: Teknik Makina
- Designation (EN): Cartridge 80-130mm for Boring Tool
- eClass: 21041590
Specifications
- Clamping range: 80–130 mm
- Torx key: T15
- Torx screw: M3.5x8.5
- Compatible inserts: CCMT 09T3
Special features
- For boring tool set
- Insert compatibility with CCMT 09T3
- Robust Torx T15 fastening
- Files: 62de7e64a9cff922f4703d2f, 62de7ef033927e49dbf32799
FAQ
Which insert type fits the cartridge?
The cartridge is compatible with CCMT 09T3 indexable inserts and is designed to accept that insert format for stable internal turning.
What clamping range does the holder support?
The clamping range is 80–130 mm, allowing one mounting unit to service a range of bore diameters in a boring tool set.
What fastening hardware is specified?
Fastening uses a Torx T15 drive and a M3.5x8.5 screw to ensure secure assembly and reliable resistance to cutting forces.
Is this component suitable for modular boring systems?
Yes, the cartridge is intended for integration into modular boring tool sets and reduces the need for multiple dedicated holders.
How is the product identified for ordering?
Order reference is THB09TM, listed under Teknik Makina as the Cartridge 80-130mm for Boring Tool.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Designation: | Ausdrehwerkzeug Satz |
|---|---|
| Diameter-1: | mm |
Zubehör
Compact, space-saving fastening with a Torx drive and an M3.5 thread for reliable assemblies; combine secure engagement and precise dimensions for efficient production. Order this fastener directly via Metav Werkzeuge or consult our specialists for compatibility checks. Torx screw TC067TM — M3.5 thread, 8.5 mm length by Teknik Makina Torx screw TC067TM for compact mechanical assemblies, designed to deliver secure drive engagement and precise thread compatibility in confined spaces Torx drive for secure engagement Nominal diameter 5.3 mm Thread M3.5 standard Compact 8.5 mm total length Consistent torque transfer for dependable assembly results The Torx geometry is engineered to reduce cam‑out and provide improved torque transmission compared with slotted or Phillips drives. In practice this means assembly processes become more reliable and repeatable: a stable driver engagement reduces slip and wear on both tool and fastener; the combination of the Torx interface and the specified T15 matching key ensures a controlled transfer of force. For engineering teams this translates into fewer reworks and smoother production flow when fitting small components. Precision dimensions that save space and simplify design With a nominal diameter of 5.3 mm and a total length of 8.5 mm, the fastener is suitable for tight assemblies where clearance is limited. The external thread designated M3.5 conforms to standard metric sizing, enabling predictable mating with corresponding tapped holes or inserts. Designers benefit from the compact profile when specifying fastenings for enclosures, panels or small brackets, since predictable thread engagement and controlled head geometry support consistent clamping without excessive protrusion. Workshop efficiency and straightforward inventory management As a standardised metric fastener, the item streamlines procurement and tool selection across routine maintenance and assembly tasks. The relatively small mass (0.1 kg stated) aids logistics planning for storage and shipping bundles, while compatibility with the T15 driver reduces the number of specialised tools required on the workbench. Supplied under the Teknik Makina designation, the component is intended as a practical choice for small‑part assembly where standardisation and accessibility are priorities. Proven supply and service through a trusted partner Sourcing through Metav aligns the technical benefits of the fastener with dependable distribution and quality control. Metav’s role as a “quality filter” for the European market means buyers gain access to consistent stock, product verification and a broad range of workshop supplies alongside measurement and tooling solutions. This combination of a reliable feed of standard parts and technical consultancy supports long‑term operational stability in manufacturing and maintenance settings. For availability and order details of the Teknik Makina Torx screw TC067TM, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com for precise product information and stock status Technical Data Article number: TC067TM Manufacturer: Teknik Makina eCl@ss: 21189290 Core technical data Weight: 0.1 kg Diameter: 5.3 mm Thread: M3.5 Total length: 8.5 mm Head angle: 60° Features Drive type: Torx Suitable key: T15 Brand: Teknik Makina FAQ What driver fits this screw most effectively? The screw is designed for a Torx drive and is compatible with a T15 Torx key for optimal engagement. Which thread standard does the fastener use? This fastener uses an M3.5 metric thread suitable for corresponding tapped holes and standard inserts. What are the primary dimensions to consider during design? Key dimensions are a nominal diameter of 5.3 mm, a total length of 8.5 mm and a head angle of 60°, which help define clearance and engagement depth. Is this part a Teknik Makina product and what is the SKU? Yes — the item is listed under Teknik Makina and is supplied as TC067TM. For which kinds of assemblies is this fastener appropriate? The component is intended for compact mechanical assemblies and small fittings where a secure Torx drive and short overall length are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts CCMT 09T304 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT09T304-Steel ISO-Code: CCMT09T304 Usage for: Steel Material: cemented carbide Form: rhombic Usable to the work on: Stahl Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT-09T304-Stahl-MetavCUT 40END