25mm Boring Tool For Fine Finishing 0.02mm Resolution, CCMT 0602 Compatible - Teknik Makina
€420.00
Product information "25mm Boring Tool For Fine Finishing 0.02mm Resolution, CCMT 0602 Compatible - Teknik Makina"
The combination of precision finishing (0.02 mm), a rigid 25 mm shank and compatibility with CCMT 0602 inserts delivers consistent bore quality and efficient tool changes; order the boring tool directly via Metav Werkzeuge or ask our consultants if needed
Boring Tool for Fine Machining — Precision boring holder, CCMT 0602 compatible, Ø25 mm shank by Teknik Makina
The Boring Tool for Fine Machining is a precision holder engineered for finishing operations on machined bores; it is optimised for indexable insert turning and compact workshop integration
- Precision finish tolerance 0.02 mm
- Compatible with CCMT 0602 inserts
- 25 mm shank diameter
- Cutting diameter up to 32 mm
Delivering repeatable precision for finishing operations
Engineered for fine finishing, this boring holder is specified for a 0.02 mm finish tolerance, which means that consistent bore geometry is achieved with each pass. The tight tolerance is particularly valuable where surface quality and dimensional consistency determine part acceptance. The toolholder design minimises deflection during light cuts and allows predictable machining results, so finishing cycles can be planned with confidence and inspection intervals reduced. The role of indexable tooling is explained by its ability to restore a fresh cutting edge quickly; the use of standardised inserts supports fast reconditioning of the cutting edge.
Rigidity and geometry that reduce vibration and improve surface quality
A substantial 25 mm shank and an overall length of 156 mm provide the necessary stiffness for finishing bores while keeping overhang controlled. The combination of shank diameter and effective cutting length (shank cutting length 100 mm) reduces chatter and contributes to superior surface finishes. By limiting elastic deflection, the holder supports finer feed settings and lower cutting forces, which translates into improved roundness and a more uniform lay on the machined surface. For workshop planning, this means predictable cycle times and fewer secondary operations.
Insert system that speeds up production and simplifies tool logistics
The holder accepts CCMT 0602 indexable inserts, a widely available format that allows rapid blade changes and economical rotation of edges. Indexable inserts make it straightforward to switch grades for different materials and to maintain production flow by stocking a limited number of insert grades rather than complete solid tools. The tool supports cutting diameters of up to Ø32 mm, offering flexibility across a range of finishing applications. Lightweight at 0.57 kg, the holder is easy to handle during setup without compromising stability on the machine.
Practical integration into workshop and production environments
Designed for use on turret lathes and CNC turning centres, this boring holder is targeted at precision job shops and production departments requiring reliable finishing performance. The compact footprint and standard insert interface make it simple to incorporate into existing tool inventories and tool magazines. Inspection results are made more consistent by the holder’s geometry, helping to reduce rework. For customers seeking supply reliability and technical advice, Metav Werkzeuge provides local stock and expertise to support specification and procurement decisions.
Contact Metav Werkzeuge in Emmerich for tailored advice on Teknik Makina finishing tools or to arrange a supply; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930
Technical data
- Article number: THKB122TM
- Manufacturer: Teknik Makina
- SKU: THKB122TM
Facts
- Fine machining tolerance: 0.02 mm
- Max cutting diameter: 32 mm
- Shank diameter: 25 mm
- Effective cutting length: 100 mm
- Overall length: 156 mm
- Weight: 0.57 kg
Special features
- Compatible with CCMT 0602 inserts
- Designed for fine finishing of bores
- Indexable-insert holder for fast tool changes
FAQ
What inserts fit the boring holder?
The boring holder accepts CCMT 0602 indexable inserts; this format is compatible with a wide range of grades and geometries for flexible finishing.
What accuracy can be expected with this tool?
The tool is specified for a 0.02 mm finish tolerance, enabling repeatable bore quality when set up and used under appropriate machining conditions.
Which shank size and overall dimensions are provided?
The holder features a 25 mm shank diameter and an overall length of 156 mm, with an effective cutting length of 100 mm.
What is the maximum cutting diameter for finishing?
The holder supports cutting operations up to Ø32 mm, suitable for a variety of finishing bore diameters.
Is the Teknik Makina boring tool suitable for automated tool magazines?
Yes, the indexable-insert format and compact design allow the Teknik Makina boring tool (SKU THKB122TM) to be integrated into turret and magazine systems where the shank and length match the machine’s toolholders.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Designation: | Ausdrehwerkzeug für die Feinbearbeitung |
|---|---|
| Diameter-1: | 25mm |
Passende Wendeplatten MetavCUT
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by e-mail.► Forward your drawing directly to us by e-mail.► Send us a sample insert or drawing by post Information on technical features indexable inserts CCMT 060202 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT060202-Steel Dataand Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT-060202-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications CCMT 060208 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT060208-Steel Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT-060208-Stahl-MetavCUT 40END
Didn't find the right insert? We can help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Detail specifications for inserts CCMT 060204 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT060204-Steel Data & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT-060204-Stahl-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts CCMT 060204 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT060204-Stainless Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT-060204-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details CCMT 060202 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT060202-Stainless Data & Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT-060202-Stainless Steel-MetavCUT 40END
Didn't find the right insert? We can help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Specifications CCMT 060202 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT060202-Aluminium Facts / Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT-060202-Aluminium-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for indexable inserts CCMT 060208 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT060208-Stainless Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT-060208-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for insert CCMT 060208 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT060208-Aluminium Data/ Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT-060208-Aluminium-MetavCUT 40END
Wendeschneidplatte CERMET CCMT 060204 MetavCUT. Material: Diese Wendeplatte wurde aus CERMET hergestellt. Konnten Sie die passende Wendeplatte nicht finden? Keine Sorge, wir sind für Sie da! ► Schicken Sie uns ein Foto Ihrer Wendeplatte per E-Mail zu. ► Senden Sie uns Ihre Zeichnung direkt per E-Mail. ► Übermitteln Sie uns Ihre Musterplatte oder Zeichnung per Postsendung. Produktdaten: Hersteller: MetavCUT Hersteller Artikelnummer: CCMT060204-MT-CERMET ISO-Codierung: CCMT060204 Material: CERMET Plattenform: rhombisch Freiwinkel: 7° mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattendicke: 2,38mm Spanbrecher: einseitig Winkel: 80° Jetzt einfach und schnell CCMT060204-MT-CERMET Schneidplatte online bestellen. Angaben zur Produktsicherheit für das Produkt CCMT 060204Wendeplatten von MetavCUT mit der Artikelbezeichnung CCMT060204-MT-CERMET. Hersteller: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich eMail: info@metav-werkzeuge.com
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features indexable inserts CCMT 060204 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT060204-Aluminium Facts & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT-060204-Aluminium-MetavCUT 40END
Passende Wendeplatten ISCAR
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts CCMT 060208 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060208-M3PIC8250 Facts / Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: IC8250 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060208-IC8250-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications CCMT 060208 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060208-M3MIC6025 Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: IC6025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060208-IC6025-ISCAR 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us your sample insert or drawing by post. Product characteristics indexable inserts CCMT 060208 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060208-F3MIC807 Data/ Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060208-IC807-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Features for insert CCMT 060208 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060208-F3MIC806 Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: IC806 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060208-IC806-ISCAR 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Technical data for indexable inserts CCMT 060208 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060208-F3MIC6025 Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: IC6025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060208-IC6025-ISCAR 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Product characteristics for CCMT 060208 insert from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060208-F3MIC6015 Data/ Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: IC6015 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060208-IC6015-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Design details indexable inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-PFIC804 Series: TURNING PVD ISO-Code: CCMT060202 Grade: IC804 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.2 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060202-IC804-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-PFIC6025 Figures for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IC6025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: SWISSTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060202-IC6025-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics CCMT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-WGIC907 Series: TURNING PVD ISO-Code: CCMT060204 Grade: IC907 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060204-IC907-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for CCMT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204TIB55 Series: TURNING CBN ISO-Code: CCMT060204 Grade: IB55 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060204-IB55-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Design details for indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-SMIC907 Facts / Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: IC907 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: SWISSTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060204-IC907-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-M3PIC8150 Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: IC8150 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060204-IC8150-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Technical data for CCMT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-M3PIC807 Facts and Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060204-IC807-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for CCMT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-M3MIC807 Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060204-IC807-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-M3MIC6015 Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC6015 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060204-IC6015-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications CCMT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204IC20N Facts and Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: IC20N with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CERMET Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060204-IC20N-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for CCMT 060202 inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202IC8250 Data/ Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IC8250 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060202-IC8250-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Features indexable inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202IC20N Dataand Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IC20N with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CERMET Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060202-IC20N-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Technical data indexable inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-F3PIC8250 Series: TURNING CVD ISO-Code: CCMT060202 Grade: IC8250 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.2 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060202-IC8250-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-F3PIC8150 Facts for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IC8150 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060202-IC8150-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Features inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-F3PIC807 Facts for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060202-IC807-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data CCMT 060202 insert from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-F3MIC807 Facts & Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060202-IC807-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-SMIC808 Facts and Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC808 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING OTHER Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCMT-060204-IC808-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Technical data indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-SMIC807 Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: SWISSTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060204-IC807-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-SMIC806 Data & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC806 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: SWISSTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060204-IC806-ISCAR 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Product characteristics inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-SMIC804 Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC804 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING OTHER Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060204-IC804-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Performance features indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-SMIC6025 Dataand Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: IC6025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060204-IC6025-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product specifications indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-F3PIC8150 Data/ Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC8150 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060204-IC8150-ISCAR 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Detail specifications for insert CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-F3PIC807 Series: TURNING PVD ISO-Code: CCMT060204 Grade: IC807 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060204-IC807-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-F3MIC807 Facts and Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC807 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCMT-060204-IC807-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Information on technical features for indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-F3MIC806 Data/ Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC806 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060204-IC806-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for CCMT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-F3MIC6025 Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC6025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060204-IC6025-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204DID5 Dataand Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: ID5 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PCD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060204-ID5-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-F3MIC806 Figures for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: IC806 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060202-IC806-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Performance features CCMT 060202 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-F3MIC6025 Data & Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IC6025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060202-IC6025-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product specifications for inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202DID5 Series: TURNING PCD ISO-Code: CCMT060202 Grade: ID5 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.2 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060202-ID5-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications CCMT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-PFIC907 Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: IC907 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: SWISSTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060204-IC907-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Technical data CCMT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-PFIC806 Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: IC806 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060204-IC806-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for CCMT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-PFIC6025 Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC6025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: SWISSTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060204-IC6025-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for CCMT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-PFIC6015 Data/ Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: IC6015 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: SWISSTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCMT-060204-IC6015-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product features for indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-M3PIC8250 Data/ Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: IC8250 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060204-IC8250-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Product characteristics for indexable inserts CCMT 060208 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060208-SMIC807 Series: TURNING PVD ISO-Code: CCMT060208 Grade: IC807 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCMT-060208-IC807-ISCAR 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Product details CCMT 060208 inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060208-SMIC6025 Series: TURNING CVD ISO-Code: CCMT060208 Grade: IC6025 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: single-sided Angle: 80° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060208-IC6025-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for insert CCMT 060208 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060208-PFIC804 Dataand Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: IC804 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING PVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060208-IC804-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Detail specifications indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-14IC5005 Data/ Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC5005 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CVD Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060204-IC5005-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Technical data indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-14IC428 Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: IC428 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: SWISSTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCMT-060204-IC428-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Performance features indexable inserts CCMT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060204-14IC20 Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC20 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING UNCOATED Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCMT-060204-IC20-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Specifications CCMT 060202 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202TIB55 Facts for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IB55 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CBN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060202-IB55-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for CCMT 060202 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-SMIC9250 Data & Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: IC9250 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: SWISSTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCMT-060202-IC9250-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts CCMT 060202 from ISCAR Brand: ISCAR Manufacturer Order Number: CCMT060202-PFIC907 Data/ Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: IC907 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: SWISSTURN Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-CCMT-060202-IC907-ISCAR 40END
Passende Wendeplatten Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts CCMT 060208 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208LF-KCK15B-KENNAMETAL Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: KCK15B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCMT-060208-KCK15B-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features CCMT 060208 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208LF-KCK15-KENNAMETAL ISO-Code: CCMT060208 Grade: KCK15 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCMT-060208-KCK15-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Performance features CCMT 060208 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208LF-KCK05-KENNAMETAL Data & Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: KCK05 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCMT-060208-KCK05-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product details for indexable inserts CCMT 060208 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208LF-KC850-KENNAMETAL Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: KC850 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060208-KC850-Kennametal 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us your sample insert or drawing by post. Product details CCMT 060204 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204LF-KCK05-KENNAMETAL Facts and Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: KCK05 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060204-KCK05-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Performance features indexable inserts CCMT 060208 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208LF-KC5025-KENNAMETAL Facts / Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: KC5025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCMT-060208-KC5025-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features for insert CCMT 060208 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208LF-KC5010-KENNAMETAL Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060208-KC5010-Kennametal 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Product characteristics CCMT 060208 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208FW-KCU10B-KENNAMETAL ISO-Code: CCMT060208 Grade: KCU10B Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060208-KCU10B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for CCMT 060208 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208FW-KC5010-KENNAMETAL Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCMT-060208-KC5010-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts CCMT 060208 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208FP-KTP10-KENNAMETAL Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: KTP10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060208-KTP10-Kennametal 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Detail specifications for CCMT 060202 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060202FW-KC5010-KENNAMETAL Facts / Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCMT-060202-KC5010-Kennametal 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Product details for CCMT 060202 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060202FP-KCS10-KENNAMETAL Dataand Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: KCS10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCMT-060202-KCS10-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Design details for CCMT 060202 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060202FP-KCP10-KENNAMETAL Dataand Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: KCP10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCMT-060202-KCP10-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics for CCMT 060202 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060202FP-KCM25B-KENNAMETAL Dataand Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: KCM25B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCMT-060202-KCM25B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204LF-KC850-KENNAMETAL Data & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: KC850 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCMT-060204-KC850-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Technical data CCMT 060204 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204LF-KC730-KENNAMETAL Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: KC730 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCMT-060204-KC730-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204LF-K313-KENNAMETAL Dataand Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: K313 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCMT-060204-K313-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for CCMT 060204 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204FW-KT315-KENNAMETAL Data/ Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: KT315 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KT315-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Design details indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204FW-KCP25C-KENNAMETAL Facts / Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KCP25C-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204MP-KCM15B-KENNAMETAL ISO-Code: CCMT060204 Grade: KCM15B Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KCM15B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Technical data for CCMT 060204 insert from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204MF-KCP25C-KENNAMETAL Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060204-KCP25C-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204MF-KCP25-KENNAMETAL Facts / Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060204-KCP25-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features CCMT 060204 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204MF-KCP10B-KENNAMETAL Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: KCP10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KCP10B-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204MF-KCM35-KENNAMETAL Facts & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: KCM35 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KCM35-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for indexable inserts CCMT 060208 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208FP-KCM25B-KENNAMETAL Facts & Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: KCM25B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060208-KCM25B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics inserts CCMT 060208 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208FP-KCM25-KENNAMETAL Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: KCM25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCMT-060208-KCM25-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204UF-KCP25C-KENNAMETAL ISO-Code: CCMT060204 Grade: KCP25C Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KCP25C-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204UF-KCP25B-KENNAMETAL Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: KCP25B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KCP25B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Product features for CCMT 060204 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204UF-KCP10-KENNAMETAL Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: KCP10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KCP10-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts CCMT 060208 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208MP-KCS10B-KENNAMETAL Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: KCS10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060208-KCS10B-Kennametal 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Detail specifications for CCMT 060208 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208MF-KCP25C-KENNAMETAL Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060208-KCP25C-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features for indexable inserts CCMT 060208 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208LF-KCP25C-KENNAMETAL Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP25C with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060208-KCP25C-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Detail specifications for indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204FP-KCU25-KENNAMETAL Facts and Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: KCU25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCMT-060204-KCU25-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for CCMT 060204 insert from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204FP-KCP25C-KENNAMETAL ISO-Code: CCMT060204 Grade: KCP25C Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060204-KCP25C-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204FP-KCP25B-KENNAMETAL Facts & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: KCP25B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KCP25B-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204FP-KCM25-KENNAMETAL Facts / Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: KCM25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCMT-060204-KCM25-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Technical data inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204FP-KCM15B-KENNAMETAL Facts / Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: KCM15B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KCM15B-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Information on technical features CCMT 060204 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204MF-KCK15-KENNAMETAL Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: KCK15 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KCK15-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Product features CCMT 060204 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204MF-KC730-KENNAMETAL Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: KC730 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KC730-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204LF-KT315-KENNAMETAL ISO-Code: CCMT060204 Grade: KT315 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCMT-060204-KT315-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product features CCMT 060204 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204LF-KCU10B-KENNAMETAL ISO-Code: CCMT060204 Grade: KCU10B Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KCU10B-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204LF-KCP30-KENNAMETAL ISO-Code: CCMT060204 Grade: KCP30 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KCP30-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications CCMT 060204 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204LF-KCP25-KENNAMETAL Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KCP25-Kennametal 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us a sample insert or drawing by post Product details for indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204LF-KCP10B-KENNAMETAL Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: KCP10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060204-KCP10B-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product characteristics for CCMT 060204 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204UF-KC5010-KENNAMETAL ISO-Code: CCMT060204 Grade: KC5010 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060204-KC5010-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product characteristics indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204MP-KCP25-KENNAMETAL Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: KCP25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060204-KCP25-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features for CCMT 060208 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208LF-KCP10-KENNAMETAL Facts & Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: KCP10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCMT-060208-KCP10-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts CCMT 060208 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060208LF-KCP05-KENNAMETAL Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: KCP05 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060208-KCP05-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features CCMT 060204 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT06020411-KT325-KENNAMETAL ISO-Code: CCMT060204 Grade: KT325 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCMT-060204-KT325-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product features indexable inserts CCMT 060202 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060202LF-KCU10B-KENNAMETAL ISO-Code: CCMT060202 Grade: KCU10B Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.2 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060202-KCU10B-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for CCMT 060202 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060202LF-KC850-KENNAMETAL Figures for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: KC850 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCMT-060202-KC850-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product characteristics for CCMT 060204 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204LF-KCM25B-KENNAMETAL ISO-Code: CCMT060204 Grade: KCM25B Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060204-KCM25B-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts CCMT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204LF-KCM15B-KENNAMETAL Data & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: KCM15B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCMT-060204-KCM15B-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for CCMT 060204 inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204LF-KCK20-KENNAMETAL Facts and Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: KCK20 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060204-KCK20-Kennametal 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications for CCMT 060204 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCMT060204LF-KCK15B-KENNAMETAL Facts and Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: KCK15B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCMT-060204-KCK15B-Kennametal 40END
Passende Wendeplatten Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics CCMT 060202 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060202MF1105-SANDVIK Data/ Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: 1105 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060202-1105-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts CCMT 060202 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060202MF1115-SANDVIK Facts for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: 1115 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060202-1115-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details CCMT 060202 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060202MF1125-SANDVIK Data & Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: 1125 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060202-1125-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features CCMT 060202 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060202-MF1205-SANDVIK Figures for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: 1205 Chip Breaker: -MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060202-1205-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product features indexable inserts CCMT 060202 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060202PF1515-SANDVIK Figures for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: 1515 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060202-1515-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Product features for indexable inserts CCMT 060202 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060202PF4325-SANDVIK Data & Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060202-4325-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Technical data for indexable inserts CCMT 060202 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060202PF4425-SANDVIK ISO-Code: CCMT060202 Grade: 4425 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.2 Chip Breaker: PF Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060202-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Information on technical features CCMT 060202 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060202UF1125-SANDVIK Facts for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: 1125 Chip Breaker: UF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060202-1125-Sandvik 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product details for CCMT 060202 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060202UF1515-SANDVIK Facts for the tool: ISO-Code: CCMT060202 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: 1515 Chip Breaker: UF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060202-1515-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for CCMT 060202 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060202UF5015-SANDVIK Facts / Figures: ISO-Code: CCMT060202 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.2 Features Material: cemented carbide Grade: 5015 Chip Breaker: UF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060202-5015-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Information on technical features for CCMT 060202 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060202WF1125-SANDVIK ISO-Code: CCMT060202 Grade: 1125 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.2 Chip Breaker: WF Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060202-1125-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features insert CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204KF3005-SANDVIK ISO-Code: CCMT060204 Grade: 3005 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: KF Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060204-3005-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Information on technical features indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204KFH13A-SANDVIK Data & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060204-H13A-Sandvik 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Features indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204KM3005-SANDVIK Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 3005 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060204-3005-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details for CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204KM3210-SANDVIK Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 3210 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-3210-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product features CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204KM3225-SANDVIK ISO-Code: CCMT060204 Grade: 3225 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: KM Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-3225-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204MF1105-SANDVIK Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 1105 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060204-1105-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Specifications for indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204MF1115-SANDVIK Facts & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 1115 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060204-1115-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Features indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204MF1125-SANDVIK ISO-Code: CCMT060204 Grade: 1125 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: MF Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060204-1125-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204-MF1205-SANDVIK ISO-Code: CCMT060204 Grade: 1205 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: -MF Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060204-1205-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204MF2015-SANDVIK Dataand Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 2015 Chip Breaker: MF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-2015-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204MM1105-SANDVIK Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 1105 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-1105-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications CCMT 060204 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204MM1115-SANDVIK Facts / Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 1115 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-1115-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product details CCMT 060204 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204MM1125-SANDVIK Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 1125 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060204-1125-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204-MM1205-SANDVIK Facts / Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 1205 Chip Breaker: -MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060204-1205-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204PF1515-SANDVIK Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 1515 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060204-1515-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204PF4315-SANDVIK Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 4315 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060204-4315-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product details for indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204PF4415-SANDVIK Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 4415 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060204-4415-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features CCMT 060204 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204PF4425-SANDVIK Data & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 4425 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060204-4425-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Design details for CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204PF5015-SANDVIK Facts / Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 5015 Chip Breaker: PF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060204-5015-Sandvik 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Product details indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204PM1515-SANDVIK Facts & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 1515 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060204-1515-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204PM1525-SANDVIK Dataand Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 1525 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060204-1525-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204PM4335-SANDVIK Dataand Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 4335 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-4335-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features for CCMT 060204 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204PM4415-SANDVIK ISO-Code: CCMT060204 Grade: 4415 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: PM Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060204-4415-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product characteristics indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204PM4425-SANDVIK ISO-Code: CCMT060204 Grade: 4425 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: PM Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060204-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Features for CCMT 060204 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UF1125-SANDVIK Dataand Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 1125 Chip Breaker: UF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060204-1125-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Specifications indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UF1515-SANDVIK Dataand Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 1515 Chip Breaker: UF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060204-1515-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UF4325-SANDVIK Data & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060204-4325-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Information on technical features for indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UF4335-SANDVIK Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 4335 Chip Breaker: UF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-4335-Sandvik 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert by e-mail.► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Product features for indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UF4415-SANDVIK ISO-Code: CCMT060204 Grade: 4415 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: UF Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications for CCMT 060204 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UF5015-SANDVIK Facts & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 5015 Chip Breaker: UF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060204-5015-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features insert CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UM1115-SANDVIK ISO-Code: CCMT060204 Grade: 1115 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: UM Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060204-1115-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Performance features for CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UM1125-SANDVIK Data/ Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 1125 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060204-1125-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UM1515-SANDVIK ISO-Code: CCMT060204 Grade: 1515 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: UM Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-1515-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Specifications CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UM1525-SANDVIK Data/ Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 1525 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060204-1525-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UM4315-SANDVIK Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 4315 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060204-4315-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product details for CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UM4335-SANDVIK ISO-Code: CCMT060204 Grade: 4335 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: UM Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060204-4335-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications insert CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UM4425-SANDVIK Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 4425 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060204-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications for indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UM5015-SANDVIK Facts / Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 5015 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060204-5015-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UR235-SANDVIK Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: R235 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The use of brand names and trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060204-R235-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UR4315-SANDVIK Dataand Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 4315 Chip Breaker: UR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060204-4315-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UR4325-SANDVIK Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060204-4325-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications for CCMT 060204 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UR4425-SANDVIK Data & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 4425 Chip Breaker: UR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-4425-Sandvik 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by email► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Product features for CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204WF1115-SANDVIK Dataand Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 1115 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060204-1115-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204WF1125-SANDVIK Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 1125 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-1125-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product specifications for CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204WF1515-SANDVIK Facts / Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 1515 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of brands and registered trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060204-1515-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204WF1525-SANDVIK Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 1525 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-1525-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204WF2015-SANDVIK Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 2015 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060204-2015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204WF3005-SANDVIK Data & Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 3005 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-3005-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204WF3210-SANDVIK ISO-Code: CCMT060204 Grade: 3210 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: WF Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-3210-Sandvik 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Information on technical features for CCMT 060204 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204WF3225-SANDVIK Dataand Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 3225 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060204-3225-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204WF4315-SANDVIK ISO-Code: CCMT060204 Grade: 4315 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: WF Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060204-4315-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications for CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204WF4415-SANDVIK Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 4415 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-4415-Sandvik 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Features for CCMT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204WF5015-SANDVIK Facts and Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 5015 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-5015-Sandvik 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Product specifications for CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208KM3005-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 3005 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060208-3005-Sandvik 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a picture of your insert directly by e-mail.► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Product specifications CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208KM3210-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 3210 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-3210-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208KM3225-SANDVIK Facts / Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 3225 Chip Breaker: KM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-3225-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details CCMT 060208 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208KMH13A-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-H13A-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications insert CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208KR3210-SANDVIK ISO-Code: CCMT060208 Grade: 3210 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: KR Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060208-3210-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Information on technical features CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208KR3225-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 3225 Chip Breaker: KR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-3225-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Specifications CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208KRH13A-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060208-H13A-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics CCMT 060208 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208MM1105-SANDVIK Data/ Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 1105 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060208-1105-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Product features indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208MM1115-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 1115 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060208-1115-Sandvik 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by email► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Features for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208MM1125-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 1125 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-1125-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208-MM1205-SANDVIK ISO-Code: CCMT060208 Grade: 1205 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: -MM Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060208-1205-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208MM2015-SANDVIK Data/ Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 2015 Chip Breaker: MM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060208-2015-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208MR2015-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 2015 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-2015-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208MR2035-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 2035 Chip Breaker: MR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-2035-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for CCMT 060208 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PM1515-SANDVIK ISO-Code: CCMT060208 Grade: 1515 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: PM Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-1515-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data for CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PM1525-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 1525 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-1525-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PM4335-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 4335 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060208-4335-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PM4415-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 4415 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-4415-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Performance features insert CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PM4425-SANDVIK Data & Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 4425 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-4425-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Product features CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PM5015-SANDVIK Data/ Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 5015 Chip Breaker: PM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-5015-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PR4315-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 4315 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060208-4315-Sandvik 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Product specifications CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PR4325-SANDVIK ISO-Code: CCMT060208 Grade: 4325 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-4325-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details for CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PR4335-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 4335 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-4335-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Features for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PR4415-SANDVIK Facts / Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 4415 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060208-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208PR4425-SANDVIK Dataand Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 4425 Chip Breaker: PR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060208-4425-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208UF5015-SANDVIK Facts / Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 5015 Chip Breaker: UF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-5015-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Detail specifications for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208UM1115-SANDVIK ISO-Code: CCMT060208 Grade: 1115 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: UM Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-1115-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product characteristics for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208UM1125-SANDVIK Data/ Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 1125 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060208-1125-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Features for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208UM1515-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 1515 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-1515-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product characteristics indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208UM235-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: M235 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-M235-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208UM4315-SANDVIK Facts and Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 4315 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060208-4315-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Specifications for CCMT 060208 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208UM4325-SANDVIK Dataand Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-4325-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications for CCMT 060208 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208UM4415-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 4415 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060208-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WF1115-SANDVIK Data/ Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 1115 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060208-1115-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Product features for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WF1125-SANDVIK Facts / Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 1125 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-1125-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Product characteristics insert CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WF1525-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 1525 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-1525-Sandvik 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Specifications for CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WF2015-SANDVIK ISO-Code: CCMT060208 Grade: 2015 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: WF Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-2015-Sandvik 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features for insert CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WF3005-SANDVIK ISO-Code: CCMT060208 Grade: 3005 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: WF Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060208-3005-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WF3210-SANDVIK Dataand Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 3210 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060208-3210-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features for CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WF3225-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 3225 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-3225-Sandvik 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features CCMT 060208 inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WF4315-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 4315 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-4315-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WF4325-SANDVIK Facts & Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCMT-060208-4325-Sandvik 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing directly by post. Specifications for CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WF4415-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 4415 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-4415-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WF4425-SANDVIK Facts for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 4425 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-4425-Sandvik 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts CCMT 060208 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WF5015-SANDVIK Facts and Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 5015 Chip Breaker: WF with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-5015-Sandvik 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Detail specifications for CCMT 060208 insert from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WM1115-SANDVIK Data & Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 1115 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-1115-Sandvik 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WM4315-SANDVIK Data & Figures: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Grade: 4315 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-060208-4315-Sandvik 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product characteristics CCMT 060208 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060208WM4415-SANDVIK Figures for the tool: ISO-Code: CCMT060208 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Grade: 4415 Chip Breaker: WM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-060208-4415-Sandvik 40END