CCMT 060208 Indexable Insert for Aluminium - MetavCUT

Take advantage of a compact, indexable solution that balances rigidity and insert compatibility for efficient internal machining. The combination of a shank Ø16 mm with a 52 mm effective cutting length supports stable boring cycles and predictable repeatability — order supply via Metav Werkzeuge or request an individual tooling recommendation from our consultants. TKB094TM Boring Bar – indexable boring tool, Ø19 mm nominal, CCMT 0602 compatible A TKB094TM boring bar designed for internal turning and reboring operations in CNC setups, optimised for use with CCMT 0602 indexable inserts and compact tool layouts Indexable CCMT 0602 compatibility Nominal diameter Ø19 mm Shank diameter Ø16 mm for rigid clamping 52 mm cutting length for deeper bores Engineered rigidity for repeatable internal machining The design focuses on delivering consistent, measurable results through rigid clamping and balanced geometry. With a shank Ø16 mm, the bar reduces vibration and tool deflection compared with slimmer alternatives, which improves bore roundness and surface finish. The nominal Ø19 mm profile and a modest mass of 0.192 kg help to maintain tool stability during interrupted cuts, making this tool suitable for short- to medium-length internal machining tasks where repeatability and control are priorities. Insert system that simplifies tooling logistics Compatibility with CCMT 0602 indexable inserts streamlines procurement and reduces inventory complexity. Indexable inserts allow economical edge changes: worn cutting edges are replaced rather than the entire tool, lowering operating costs and shortening downtime. For less experienced staff, an indexable system also simplifies set-up because insert seating and clamping angles are standardised; the result is quicker insert replacement and consistent cutting geometry across multiple tool holders. Integration into CNC workflows and measurable productivity gains The bar’s 52 mm cutting length and 100 mm overall length are balanced for accessible reach in most turning centres while keeping overhang minimal. The maximum cutting diameter 23 mm provides a clear performance envelope for process planning. Reduced set-up time and fewer full-tool replacements translate into higher effective machine availability and a predictable cycle time — a rational benefit for production planning and cost accounting in small-batch and serial manufacturing environments. Contact Metav Werkzeuge for a tailored technical recommendation and supply of the Teknik Cutting Tools TKB094TM boring bar, directly from our Emmerich hub. Technical data Article number: TKB094TM Manufacturer: Teknik Makina Name: Boring bar Accepts: CCMT 0602 inserts Weight: 0.192 kg Facts Nominal diameter: 19 mm Maximum cutting diameter: 23 mm Shank diameter: 16 mm Cutting length: 52 mm Overall length: 100 mm Special features For indexable CCMT 0602 inserts Shank Ø16 mm for rigid clamping Nominal Ø19 mm profile 52 mm effective cutting length Compact 100 mm overall length FAQ What insert type does this boring bar accept? The TKB094TM boring bar is specified for CCMT 0602 indexable inserts, providing standardised seating and cutting geometry for quick insert changes. What are the key dimensional limits for planning a process? Key values for planning with this boring bar are a nominal diameter of 19 mm, maximum cutting diameter 23 mm, cutting length 52 mm and overall length 100 mm. Which shank diameter is required for secure clamping? Secure clamping requires a holder or arbor compatible with the shank Ø16 mm dimension to ensure the required rigidity. How does the TKB094TM support shop-floor efficiency? By using indexable inserts and a compact geometry, the TKB094TM reduces downtime for tool changes and helps keep overhang low, contributing to steadier cycle times and less rework. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a secure insert seat and straightforward compatibility to keep turning operations efficient; the cartridge combines precision fit and workshop durability for steady results. Order the part directly via Metav Werkzeuge or consult the technical team for application advice. Cartridge for Boring Tool 19-23 CCMT 0602 – precision insert seat by Teknik Makina Cartridge for Boring Tool 19-23 CCMT 0602 is a precision cartridge designed to accept indexable CCMT 0602 inserts and to mate with boring bars in the 19–23 mm range for reliable turning and finishing tasks. Precision insert seat for CCMT 0602 Fits 19–23 mm boring bar range Durable construction for workshop use OEM compatibility with Teknik Makina Secure seating for consistent cutting performance The cartridge provides a precision insert seat that stabilises the CCMT 0602 insert during cutting, reducing micro‑movement and improving dimensional repeatability. A securely seated insert lowers the risk of chatter and irregular wear, which contributes to consistent surface finish and predictable tool life. This stable mechanical interface is particularly valuable in series production where process reliability is a priority. Faster changeover through standardised fit Designed to match the 19–23 mm boring bar envelope, the cartridge simplifies tool exchanges and shortens set‑up time. The clear compatibility with indexable CCMT geometry enables quick replacement of worn seats or inserts without complex adjustment. Reduced downtime and faster machine restarts lead to more productive machining cycles and a leaner workflow in the workshop environment. Built for regular workshop use Manufactured to industry expectations, the cartridge offers durable workshop fitment that withstands routine handling and installation. As a component from Teknik Makina, it integrates with standard boring tool assemblies and supports everyday turning and finishing operations. Combined with a disciplined maintenance routine, the cartridge helps maintain cutting performance across multiple insert changes. Practical installation and inspection advice Installation requires correct seating of the insert and verification of clamping torque to ensure the cartridge functions as intended. Regular visual inspection for wear or deformation preserves tool integrity and machining quality. If application specifics or dimensional drawings are needed, Metav’s technical advisers provide further documentation and compatibility checks to support integration into existing setups. For availability, technical compatibility checks or bespoke advice on Teknik Makina cartridges, contact Metav Werkzeuge – phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com; consultations are available from our Emmerich centre. Technical data Article number: KR098TM Designation: Kartusche (Cartridge) for Boring Tool 19-23 CCMT 0602 Manufacturer: Teknik Makina Numbers / Core technical data Boring range: 19–23 mm Compatible insert: CCMT 0602 Special features Suitable for boring tool 19–23 CCMT 0602 OEM-compatible cartridge Robust workshop fit FAQ What insert type does this cartridge accept? The cartridge accepts CCMT 0602 indexable inserts and is configured for the insert geometry associated with that designation. Which boring bar sizes are compatible with this cartridge? Compatibility is specified for a 19–23 mm boring bar range; the cartridge is intended for installations within that envelope. Is this a genuine Teknik Makina part and how is quality ensured? This is a Teknik Makina cartridge (SKU KR098TM); parts are distributed via Metav Werkzeuge, which acts as the responsible distributor to ensure quality and traceability. How often should the cartridge be inspected in workshop use? Inspection frequency depends on cycle time and cutting conditions; regular checks after insert changes are recommended to confirm seat integrity and clamping condition. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precision cartridge designed specifically for the CCMT 0602 insert range and ensure consistent seating and repeatable machining results; order directly via Metav Werkzeuge or contact our consultants for fit confirmation and supply. Cartridge KR100TM – Cartridge for Boring Tool 23–28 CCMT 0602 (Teknik Cutting Tools) A Cartridge KR100TM engineered to fit boring tool systems accepting CCMT 0602 inserts, intended for standardised mounting within the 23–28 application range. Compatible with boring tool 23–28 CCMT 0602 Teknik Makina original component SKU KR100TM for fast identification Precise insert seating to maintain machining accuracy The cartridge is designed to secure CCMT 0602 indexable inserts with consistent positioning, which supports repeatable cutting geometry and helps keep tool offsets stable. Correct seating reduces micro-movement at the insert interface and therefore contributes to precision in turning and boring processes. For users managing mixed tool fleets, standardised seating means fewer adjustments and more predictable part tolerances, translating directly into lower scrap rates and steadier cycle times. Streamlined setup and clearer stock management By specifying the SKU KR100TM and the compatible insert designation, workshop managers gain clarity when replenishing spare parts and planning maintenance. The clear association with the 23–28 application range and the CCMT 0602 insert family simplifies ordering and reduces the risk of incorrect components entering the toolroom. Fewer mismatches at assembly lead to quicker changeovers and less downtime, which improves overall equipment effectiveness in production environments where every minute of spindle time counts. Reliable supply backed by established industry partners Manufactured under the Teknik Cutting Tools name, this cartridge aligns with recognised tooling standards and is distributed through Metav Werkzeuge’s European supply chain. Metav’s role as a quality filter for the market means access to a wide range of precision items alongside documented sourcing and dependable logistics. The combination of a reputable tooling manufacturer and a dedicated distributor supports both immediate replacement needs and longer-term procurement strategies for workshops and industrial customers. For enquiries about compatibility, delivery or to confirm suitability for a specific boring head, contact Metav Werkzeuge — specialists in precision supply from Emmerich; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: KR100TM Description: Cartridge for Boring Tool 23–28 CCMT 0602 Manufacturer: Teknik Makina Facts Tool range: 23–28 Insert designation: CCMT 0602 SKU: KR100TM Special features Compatibility with CCMT 0602 indexable inserts Intended for boring tool 23–28 Supplied as a single replacement cartridge FAQ Is this cartridge compatible with all CCMT 0602 inserts? The cartridge is intended for the CCMT 0602 insert form; compatibility also depends on the specific boring head and clamping geometry used in the 23–28 range. How is the KR100TM identified when ordering spares? Use SKU KR100TM and the designation for the boring tool (23–28 CCMT 0602) to ensure the correct cartridge is supplied. Can the cartridge affect tool runout and surface finish? Correct seating of the insert in the cartridge helps maintain consistent tool geometry, which in turn supports stable runout values and repeatable surface finish in machining operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid design and indexable-insert compatibility for reliable fine internal finishing; the combination of a 25 mm shank, 189 mm cutting length and insert-based system supports consistent productivity and low downtime. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Boring bar THKB136TM – indexable-insert boring tool for fine machining (Ø 40 mm, CCMT 0602) by Teknik Makina The Boring bar THKB136TM is a purpose-built internal boring tool for precision finishing in turning applications, engineered for tight tolerances and stable chip control Fine finish to 0.01 mm Accepts CCMT 0602 inserts Ø 40 mm cutting diameter 25 mm shank, 245 mm overall length Deliver consistent finishes with measurable tolerances The tool is designed to deliver a fine finish down to 0.01 mm, making it suitable for precision internal machining where reproducible surface quality is mandatory. Using an indexable-insert system ensures repeatable cutting geometry; this stability reduces the need for secondary operations and lowers scrap rates. Clear numerical targets, such as the achievable tolerance and provided cutting diameters, create a verifiable basis for process planning and quality control. Rigid geometry reduces vibration and improves tool life A 25 mm shank combined with an overall length of 245 mm and a cutting length of 189 mm provides a balanced ratio between reach and rigidity. This geometry limits deflection during boring cycles, which in turn preserves insert life and enhances dimensional accuracy. The unit's mass (approx. 1.723 kg) contributes to damping, helping to maintain a constant cutting force and stable chip formation across the intended bore sizes. Versatile insert system for efficient workshop logistics Compatibility with CCMT 0602 indexable inserts allows quick tool reconditioning and a consistent cutting edge across different batches. The bar supports a nominal Ø 40 mm cutting diameter with a maximum cutting capability up to 50 mm, covering a common range of internal finishing tasks. Standardising on widely available inserts lowers stocking complexity and reduces machine downtime during insert changes, improving overall throughput. Practical benefits for production planning and setup The combination of measurable parameters and a standard insert interface simplifies fixture and holder selection, while the tool's specifications enable predictable cycle times. The design supports integration into existing boring toolholders that accept a 25 mm shank, making retrofits straightforward. For process engineers, the clear data on diameter limits, cutting length and repeatable finishing tolerance supports confident machining parameter selection and risk mitigation. Contact Metav Werkzeuge for tailored application advice and to arrange delivery of the Teknik Makina THKB136TM — our Emmerich team is available to discuss suitability, delivery times and integration into existing setups. Technical data Article number: THKB136TM Manufacturer: Teknik Makina Type: Boring tool for fine machining ECLASS: 21041590 Numbers / Core technical data Cutting diameter max: 50 mm Nominal cutting diameter: 40 mm Shank diameter: 25 mm Cutting/shank length: 189 mm Overall length: 245 mm Weight: 1.723 kg Fine machining tolerance: 0.01 mm Special features / Versions For indexable inserts CCMT 0602 Designed for fine internal finishing Indexable-insert system for quick replacement Suitable for precision turning applications FAQ What insert type does this boring bar use? The THKB136TM is designed to accept CCMT 0602 indexable inserts, enabling fast replacement and consistent cutting geometry. What bore sizes can be machined with this tool? The tool covers a nominal cutting diameter of Ø 40 mm and can be used up to a maximum cutting capability of 50 mm depending on application parameters. How does the shank size affect setup? A 25 mm shank gives a robust connection to standard boring holders; for secure clamping, select holders rated for a 25 mm diameter shank to maintain rigidity and accuracy. What level of surface precision is achievable? The design targets fine finishing down to 0.01 mm, providing a reliable baseline for achieving tight dimensional tolerances in internal machining. Is the THKB136TM suitable for long-reach boring? With an overall length of 245 mm and a cutting length of 189 mm, the bar balances reach and stiffness; for extended-reach requirements, assess toolholder rigidity and process parameters to avoid deflection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise geometry, easy insert handling and measurable performance: the DF182TM disc cutter delivers consistent slotting and face milling with its Ø160 mm diameter and CCMT 0602 compatibility. Order directly via Metav Werkzeuge or consult the technical team for integration advice. DF182TM disc cutter — Ø160 mm, for CCMT 0602 inserts (Teknik Cutting Tools) The DF182TM disc cutter is engineered for industrial slotting and peripheral milling, offering a compact cutter body designed to accept CCMT 0602 indexable inserts for fast, reliable insert changes in production environments. Ø160 mm cutter body Compatible with CCMT 0602 inserts 8 mm cutting height 40 mm arbor bore Faster cycle times through optimised cutter geometry The robust body and tooth arrangement reduce vibration and support stable chip formation, which improves machining efficiency. With a nominal Ø160 mm diameter and 16 teeth, the tool enables smooth engagement and even load distribution across the insert pockets. This results in shorter non-cutting times and more predictable cycle times for repetitive slotting or face operations. The design supports consistent chip evacuation and repeatable surface results, helping to increase throughput in batch production. Straightforward insert system and secure clamping Tool changes and reconditioning are efficient thanks to the use of standard CCMT 0602 indexable inserts and secured fastening. Each insert is held by Torx M2.5x7 screws tightened with a T08 key, offering repeatable clamping torque and minimal setup effort. The cartridge-style pockets allow simple indexing of worn cutting edges, reducing downtime compared with brazed or solid cutters. Clear mechanical fixation ensures reliable seating of the inserts and reduces the need for frequent rework of the cutting geometry. Practical mounting and accessibility for common toolholders The cutter features a central arbor bore of 40 mm, enabling secure mounting to compatible arbors and arbors with standard interfaces. The 8 mm cutting height balances material removal per tooth with insert strength, making the cutter suitable for stable slotting depths up to the indicated engagement. At a mass of approximately 0.996 kg, the body is easy to handle during tool changes yet substantial enough to support vibration damping and maintain alignment under load. This combination reduces setup complexity and supports rapid tool replacement in the workshop. Reliable service life and workshop convenience The use of off-the-shelf CCMT 0602 inserts keeps running costs predictable and simplifies inventory management, since replacement inserts and screws are widely available. The cutter’s multiple cutting edges allow incremental re-indexing rather than full regrinding, extending the time between consumable purchases. For purchasers seeking dependable supply and technical guidance, Metav presents a consolidated sourcing option and technical consultancy to ensure the cutter integrates seamlessly into existing tool chains. Choose Teknik Cutting Tools' DF182TM disc cutter for dependable slotting performance and contact Metav Werkzeuge for tailored technical support and order coordination at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DF182TM Manufacturer: Teknik Makina Product: disc cutter Facts Diameter: 160 mm Cutting edges: 16 Cutting height: 8 mm Arbor bore: 40 mm Max recommended engagement (ap): 50 mm Weight: 0.996 kg Special features For indexable inserts: CCMT 0602 Fastening screw: Torx M2.5x7 Torx key size: T08 Body type: disc cutter FAQ What inserts does this cutter accept? The DF182TM accepts CCMT 0602 indexable inserts; the pocket design is optimised for that insert geometry for quick indexing and secure clamping. What arbor size is required to mount the cutter? The cutter has a 40 mm arbor bore and requires a matching arbor or adaptor to ensure correct concentricity and secure mounting. How many cutting edges are fitted to the cutter body? The tool is supplied for 16 cutting edges, providing a balance between material removal rate and surface smoothness. What is the cutting height and its practical implication? The cutting height is 8 mm, which defines the maximum vertical engagement of the insert and is suitable for moderate slot depths while maintaining insert stability. Which torque tool is used to secure the inserts? Inserts are fastened with Torx M2.5x7 screws tightened using a T08 Torx key, giving repeatable clamping performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, ISO‑conforming turning holder that combines precise clamping for CCMT 0602 inserts with a defined 95° cutting angle and a convenient 110 mm overall length — the result is consistent external turning and reliable insert indexing. Order directly via Metav Werkzeuge or contact the technical sales team for application advice. SCLC for CCMT Indexable Inserts (SCLCR 1010) – right‑hand turning holder by Teknik Makina A robust SCLC for CCMT Indexable Inserts designed for right‑hand external turning, compatible with CCMT 0602 indexable inserts and engineered to fit standard ISO SCLCR 1010 toolpost systems. Compatible with CCMT 0602 inserts ISO SCLCR 1010 designation Right‑hand orientation 95° cutting angle Precision clamping for repeatable turning results The SCLCR 1010 style holder offers precise clamping and a compact profile that supports repeatable indexable insert seating. With a head height of 10 mm and a defined seating for CCMT 0602 inserts, the design reduces play at the cutting edge and keeps tool run‑out low. That stability translates into more consistent surface finish and prolonged insert life, because the insert is held firmly at the designed bite point rather than relying on ad‑hoc fixtures. The ISO designation guarantees compatibility with existing toolposts and simplifies tool inventory management. Stable geometry for controlled cuts and easy set‑up Engineered with a 95° cutting angle and a right‑hand orientation, the holder directs cutting forces predictably for external turning operations. The unit’s 110 mm overall length and modest mass (0.106 kg) make it simple to position in a toolpost while maintaining rigidity; shorter overhang reduces deflection and vibration. The SCLC form factor permits quick indexable insert replacement and re‑seating, which minimises machine downtime. For shops seeking consistent cycle times and lower scrap rates, the controlled geometry is a tangible operational advantage. Practical supply and application support for workshop integration Supplied with a standard SCLCR interface and identified as SKU D422TM, the holder integrates into common lathe setups and forms part of a pragmatic tooling strategy. Metav’s distribution from Emmerich acts as a quality checkpoint for the European market, ensuring dependable availability and clear traceability. For applications that demand predictable machining outcomes, this holder delivers a compact, industry‑aligned solution while allowing selection of insert grades and coatings to match specific material challenges. Contact Metav Werkzeuge for tailored application advice on the Teknik Cutting Tools SCLC turning holder (SKU D422TM) and to discuss the optimal insert grade and set‑up for the intended machining task. Technical data Article number: D422TM Type designation: SCLCR 1010 For inserts: CCMT 0602 Orientation: right‑hand Cutting angle: 95° Overall length: 110 mm Head height: 10 mm Head width: 10 mm Holder width: 10 mm Weight: 0.106 kg Boring bar designation: J06‑F Brand: Teknik Makina Measurements Overall length: 110 mm Head height: 10 mm Head width: 10 mm Holder width: 10 mm Weight: 0.106 kg Cutting angle: 95° Special features SCLC design for CCMT indexable inserts Compatible with CCMT 0602 ISO: SCLCR 1010 Right‑hand orientation 95° cutting angle Boring bar designation: J06‑F FAQ Which inserts fit this holder? Compatible with CCMT 0602 indexable inserts; the holder is configured for standard CCMT pocket seating. Is the holder right‑hand or left‑hand? This SCLC holder is a right‑hand version, intended for conventional right‑hand external turning. What does the 95° cutting angle mean in practice? A 95° cutting angle provides a near‑orthogonal approach to the workpiece that balances cutting edge strength with accessibility for profiling and facing operations. How is the holder referenced and ordered? The item is listed as SKU D422TM, type SCLCR 1010, from Teknik Makina; use that reference when specifying the component for procurement. Can the holder be used with different insert grades for various materials? Yes, the mechanical seat fits CCMT 0602 inserts; select the appropriate insert grade and coating separately to match the workpiece material and cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, rigid design that delivers fine finishing to 0.02 mm, supports economical indexable inserts and reduces rework in high-precision turning operations; order directly via Metav Werkzeuge for reliable supply and expert advice. Boring tool for fine machining — CCMT 0602 compatible, Ø32 mm by Teknik Makina The Boring tool for fine machining is a precision internal boring bar engineered for tight-tolerance finishing in CNC turning centres and toolroom lathes. Precision fine finishing to 0.02 mm Compatible with CCMT 0602 inserts Ø32 mm max cutting diameter 25 mm shank diameter for stable clamping Consistent fine finishing with minimal rework This boring bar is designed to deliver repeatable surface quality on finishing passes. The specified machining capability of 0.02 mm means that the tool is optimised for close-tolerance internal bore work, reducing the need for secondary operations. Using an indexable insert system such as CCMT 0602 provides cost-effective tool life: worn edges can be indexed or replaced quickly, which keeps machine downtime low and production flow steady. Rigidity and handling that improve process stability A robust 25 mm shank and a 50 mm effective cutting length ensure stable clamping and reduced vibration during machining. The combination of a 25 mm shank, 50 mm cutting length and an overall length of 106 mm gives a compact footprint that improves accessibility in confined bores while maintaining the rigidity required for high-quality finishes. The tool’s 0.402 kg mass contributes to controlled dynamics without adding unnecessary weight to the turret or toolpost. Simple integration into workshop routines The tool accepts common CCMT 0602 indexable inserts, which simplifies procurement and tool management. Compatibility with widely used inserts makes it straightforward to service and replenish consumables. For operations aiming to streamline tooling, this solution aligns with standard insert stocks and shortens changeover times. Metav Werkzeuge’s presence in Emmerich acts as a quality filter and reliable distribution point for Teknik Makina products, supporting uninterrupted workshop supply. For precision finishing with Teknik Makina tools, request the THKB120TM from Metav Werkzeuge — Metav’s specialists in Emmerich can advise on insert selection and delivery: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: THKB120TM Manufacturer: Teknik Makina Product: Boring tool for fine machining Compatible inserts: CCMT 0602 ECLASS: 21041590 Facts Max cutting diameter: 32 mm Shank diameter: 25 mm Cutting length: 50 mm Overall length: 106 mm Fine machining capability: 0.02 mm Weight: 0.402 kg Special features Indexable insert holder for economical use Compact, rigid design for finishing passes Suited to CNC turning centres and toolroom lathes Fast insert change and low downtime FAQ Which inserts fit this boring bar? The THKB120TM accepts CCMT 0602 indexable inserts; Teknik Makina designed the holder to suit this common insert format for ease of procurement and cost-effective indexing. What finish tolerance can be expected? For finishing operations the tool is specified for 0.02 mm capability, enabling tight internal bore control when set up with appropriate feeds and speeds. Is the tool suitable for use in CNC turning centres? Yes — the boring bar is tailored for internal finishing in CNC turning centres and similar machines where stable clamping and short overhangs are achievable. How are inserts replaced on this holder? Inserts for THKB120TM are replaced in the standard manner for indexable systems: secure the tool, remove the clamp screw, replace or index the CCMT 0602 insert, and re-torque to the specified value for reliable clamping. What clamping recommendations apply? Clamp the 25 mm shank securely in the turret or toolholder and minimise overhang to preserve rigidity; the design aims to reduce vibration and maintain surface quality during finishing cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of 0.01 mm finishing accuracy combined with a 25 mm shank for stable machining and reduced rework; the tool's compatibility with CCMT 0602 inserts ensures rapid indexable insert changes and consistent surface quality. Order the boring tool directly via Metav Werkzeuge or consult the team for application-specific advice. Boring tool for fine finishing — Teknik Makina fine-finishing boring bar with CCMT 0602 compatibility Boring tool for fine finishing designed for precision internal finishing in production workshops and toolrooms High-precision finishing to 0.01 mm Accepts CCMT 0602 indexable inserts 25 mm shank for stable clamping 125 mm overall length for deep bore access Consistent fine finishing for demanding internal bores The boring bar delivers a proven capability for tight-surface tolerances, with a documented fine finishing capability of 0.01 mm. This level of control reduces the need for subsequent polishing or rework and supports parts that must meet tight geometrical and surface specifications. Built to accept CCMT 0602 indexable inserts, the holder enables predictable chip formation and an easily repeatable finish quality. For production lines where cycle consistency and first-pass yield matter, the combination of fine tolerance and indexable inserts translates directly into fewer rejects and lower downstream labour costs. Rigid design that minimises chatter and improves productivity A 25 mm shank and compact overall length of 125 mm provide a stiff tool-holding solution that resists deflection in finishing passes. The tool's cutting portion extends 69 mm, allowing access into deeper bores while maintaining the necessary rigidity for high-quality finishes. Reduced vibration and improved tool stability lead to longer insert life and steadier cutting parameters, which in turn lowers setup time and increases machine throughput. These mechanical advantages support efficient machining on both CNC lathes and conventional turning centres. Fast insert replacement and straightforward integration into toolcycles Compatibility with standard CCMT 0602 inserts makes insert procurement and replacement simple and economical. Indexable inserts allow quick corner changes without the need for regrinding, reducing machine downtime and simplifying tooling logistics. The design supports common clamping systems and can be integrated into existing tool racks and presetting routines, so shops benefit immediately from lower setup complexity and faster return on tooling investment. Applications, target users and workshop benefits Intended for precision internal finishing tasks up to a 50 mm cutting diameter, this boring bar suits toolrooms, precision engineering shops and serial production environments that value surface integrity and dimensional accuracy. The rigour of the mechanical design and insert system brings practical benefits: fewer quality inspections, predictable maintenance intervals and consistent part quality. For workshops seeking dependable finishing solutions, the tool offers a clear productivity uplift and helps maintain standards across batches. Contact Metav Werkzeuge to arrange supply or a technical consultation on the Teknik Makina fine finishing boring tool THKB132TM — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: THKB132TM Manufacturer: Teknik Makina Numerical data Maximum cutting diameter: 50 mm Shank diameter: 25 mm Cutting length: 69 mm Overall length: 125 mm Weight: 0.722 kg Fine finishing capability: 0.01 mm Designs / Special features Compatible inserts: CCMT 0602 Designed for fine finishing internal bores Indexable insert holder for rapid replacement FAQ What diameter range is suitable for machining with this boring bar? This boring bar is designed for internal finishing operations up to a 50 mm cutting diameter and is optimised for fine finishing work with the Teknik Makina boring tool THKB132TM. Which insert type is required for this holder? The holder is compatible with CCMT 0602 indexable inserts; using these standard inserts with the Teknik Makina fine finishing boring tool THKB132TM enables quick changes and consistent results. How does the shank diameter affect performance? The 25 mm shank diameter increases rigidity and reduces deflection during finishing passes, improving surface quality and insert life when using the Teknik Makina boring bar THKB132TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precision T‑slot cutter that combines replaceable CCMT indexable inserts, a robust 20 mm shank and a compact overall length for efficient setup and consistent production results; order directly via Metav Werkzeuge or ask our consultants for machining recommendations. T-Nut Cutter TKC102TM by Teknik Makina — 32 mm diameter, for indexable CCMT 0602 inserts The T-Nut Cutter TKC102TM is designed for accurate T‑slot machining on CNC milling machines and modular fixtures, offering a replaceable‑insert concept for economical series production. T-slot cutter »TKC102TM« by Teknik Makina Compatible with CCMT 0602 indexable inserts 32 mm cutting diameter, 4 flutes 20 mm shank diameter for secure clamping Consistent production from replaceable indexable inserts The replaceable indexable inserts system is the core benefit of this tool: CCMT 0602 inserts are used, so wear is managed by logistically simple plate changes rather than full‑tool replacement, reducing downtime and consumable costs. The insert geometry is chosen to deliver a precision slot profile with minimal vibration; users unfamiliar with indexable tooling will find that changing a seat of inserts is significantly quicker than re‑grinding solid cutters. This approach keeps tolerances stable across batches and makes surface finish reproducible without complex re‑setting procedures. Stable clamping and geometry for higher feed rates A 20 mm shank ensures secure clamping in standard holders and collets, improving concentricity and reducing runout during high‑feed operations. The body features 4 flutes matched to a 32 mm external diameter and a 40 mm cutting length, which together balance chip evacuation and engagement length to permit elevated material removal rates while maintaining tool life. The cutter’s 12 mm effective cutting height is engineered to suit typical T‑slot profiles; this geometry reduces deflection and allows for steady surface quality, which is particularly advantageous when machining longer runs or harder alloys. Quick insert changes and workshop practicality Assembly and maintenance are simplified: the insert is secured with a Torx screw M2.5x3.5 and standard Torx key T8, enabling fast, repeatable insert replacement without specialised tooling. The tool’s overall length of 100 mm and light weight (0.3 kg) make it straightforward to handle during set‑up and inspection. Supplied as an indexable cutter compatible with CCMT plates, the design supports predictable service life budgeting and straightforward inventory management — an attractive operational advantage for busy production shops and contract manufacturers alike. Contact Metav Werkzeuge today for tailored machining guidance or to arrange procurement of the Teknik Cutting Tools T‑slot cutter — expert advice and reliable supply direct from Emmerich. Technical Data Article number: TKC102TM Manufacturer: Teknik Cutting Tools Type: T-slot cutter Facts Diameter: 32 mm Number of flutes: 4 Overall length: 100 mm Shank diameter: 20 mm Cutting length: 40 mm Cutting height: 12 mm Weight: 0.3 kg Special features Compatible with CCMT 0602 indexable inserts Torx screw M2.5x3.5 for insert clamping Torx key size T8 Designed for CNC milling and fixture slotting FAQ How are inserts secured on this cutter? Insertion plates are fixed with a Torx screw M2.5x3.5; a T8 key is used for tightening and replacement on the TKC102TM. Which insert type is required for replacement? Replacement requires CCMT 0602 indexable inserts, chosen for their economy and repeatable cutting geometry in T‑slot profiles. What clamping size is recommended for stable operation? A 20 mm shank provides secure clamping in standard holders and collets, improving runout and enabling higher feed rates. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high productivity, precise insert compatibility and robust spindle mounting for uninterrupted milling cycles — order the cutter directly via Metav Werkzeuge or consult our specialists for application-specific setup and tooling advice. Indexable Disc Cutter DF194TM — 200 mm diameter, CCMT 0602 compatible, Teknik Makina The DF194TM disc cutter is a heavy-duty indexable milling tool designed for high-throughput milling operations where stable mounting and quick insert changes are essential. 200 mm diameter for high material removal Compatible with CCMT 0602 indexable inserts 18 cutting edges for smooth chip flow 40 mm arbor for rigid spindle mounting Optimised for high material removal and short cycle times The disc cutter is engineered to deliver consistent chip removal with its 200 mm diameter and 18 cutting edges. A larger cutter diameter increases effective cutting circumference, enabling higher feed per revolution and reduced cycle times in series production. The tool’s 70 mm axial depth capability allows substantial engagement per pass, which translates into fewer passes and improved throughput while maintaining surface integrity. Tooling economy through standard indexable inserts Compatibility with CCMT 0602 indexable inserts reduces downtime and tooling cost: worn edges are fast to replace and carbide inserts can be sourced globally. Indexable systems separate expensive tool bodies from consumable inserts, providing a predictable cost-per-part and simple inventory management. For workshops introducing insert tooling, this cutter offers clear savings in maintenance time and reproducible cutting performance. Rigid mounting and repeatable stability for accurate results A 40 mm arbor interface ensures a stiff connection to the spindle, which reduces vibration and improves dimensional consistency. Fastening uses M2.5x7 Torx screws tightened with a T08 key for secure insert clamping and straightforward service routines. The cutter’s 8 mm cutting height provides adequate insert engagement for robust stock removal without compromising insert life, while the tool mass of 1.587 kg contributes to stable running at moderate spindle speeds. Designed for industrial production and easy integration This indexable disc milling cutter suits machine shops that value repeatability and simple maintenance. The modular concept of indexable inserts supports rapid changeovers and predictable performance across batch and continuous processes. Technical staff will appreciate the straightforward clamping system and standard insert format, which facilitate quick training and fast integration into existing tool sets — for specialist set-up recommendations, Metav Werkzeuge can advise on optimal spindle speeds and feed strategies. Discuss Teknik Makina’s DF194TM with Metav Werkzeuge to define the best insert choice and spindle setup for specific machining tasks — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and reliable supply from Emmerich. Technical data Article number: DF194TM Manufacturer: Teknik Makina Product: Indexable disc cutter Designation: Disc cutter DF194TM Facts Diameter: 200 mm Number of cutting edges: 18 Cutting height: 8 mm Arbor diameter: 40 mm Maximum axial depth (ap): 70 mm Weight: 1.587 kg Special features Compatible inserts: CCMT 0602 Fastening screws: M2.5x7 Torx, key T08 SKU: DF194TM FAQ What insert type does the cutter take? The cutter accepts CCMT 0602 indexable inserts; this standard format simplifies insert sourcing and replacement for the DF194TM disc cutter. How is the tool mounted to the spindle? Mounting is via a 40 mm arbor connection; this rigid interface is designed for stable clamping and improved running accuracy for the DF194TM. How many cutting edges are fitted and what is the benefit? There are 18 cutting edges, which offer continuous engagement to smooth chip flow and increase material removal per revolution. What is the maximum axial engagement for this cutter? The cutter provides an axial depth capacity of 70 mm, enabling deeper cuts and fewer passes in suitable milling operations. Which fastening hardware is supplied for the inserts? Fastening uses M2.5x7 Torx screws tightened with a T08 key, allowing secure insert clamping and straightforward service procedures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a sturdy 20 mm shank, a long 185 mm cutting length and compatibility with CCMT 0602 indexable inserts for reliable internal machining and reduced cycle times. Order the internal boring bar directly via Metav Werkzeuge or ask the consultants if needed. Internal boring bar TKB104TM — 20 mm shank, CCMT 0602 compatible (Teknik Makina) The internal boring bar TKB104TM is designed for controlled internal turning with indexable CCMT 0602 inserts, delivering stable bore finishing and straightforward insert changes for small to medium production runs 20 mm shank for stable clamping Compatible with CCMT 0602 inserts 185 mm cutting length for deep bores Total length 235 mm Engineered rigidity for repeatable bore results A robust 20 mm shank is provided to maintain concentricity and minimise vibration during internal turning, so runout is reduced and surface quality is improved. The tool body is balanced for stable rotation and the moderate weight (0.682 kg) supports safe handling while remaining rigid in the tool post. These design choices translate into fewer scrapped parts and more consistent first-pass quality on turned bores. Fast indexability and controlled chip flow Compatibility with CCMT 0602 indexable inserts enables rapid, cost-efficient insert replacement and flexible grade selection for different workpiece materials. The long 185 mm cutting length gives access to medium-depth bores without frequent tool changes. Insert geometry fosters predictable chip formation, which minimises interruptions and helps maintain steady cycle times on CNC lathes and manual turning centres. Precision where it matters — process stability The geometry and shank specification are chosen to support accurate bore diameters and repeatable finishes. The tool is suited for finishing and light-medium stock removal where dimensional stability is required. Where operators demand reproducible outcomes, the boring bar’s construction reduces the need for corrective passes, improving productivity and lowering overall machining costs. Simple integration and low-maintenance operation The boring bar is compatible with standard tool holders and is supplied for use with industry-standard CCMT 0602 inserts, simplifying inventory and maintenance routines. Routine upkeep is limited to insert changes and basic clamping checks; no specialised service tools are necessary. The tool’s total length of 235 mm allows straightforward setup in common lathe configurations, making it a practical choice for mixed-shop environments and contract workshops. Contact Metav Werkzeuge to discuss how the Teknik Cutting Tools TKB104TM boring bar with a 20 mm shank and 185 mm cutting length can streamline internal turning processes — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TKB104TM Manufacturer: Teknik Makina eClass: 21181208 Files: 62de7eef0f56dbb4de4dbf60, 62de7e6333927e49dbf32755 Facts Shank diameter: 20 mm Cutting length: 185 mm Total length: 235 mm Weight: 0.682 kg Special features For indexable inserts CCMT 0602 SKU: TKB104TM Suitable for internal turning applications FAQ What insert type does this boring bar take? The boring bar is compatible with CCMT 0602 indexable inserts; these inserts can be selected in grades appropriate for steel, alloyed materials or finishing tasks. Is the tool suitable for deep bore machining? With a cutting length of 185 mm and a total length of 235 mm, the bar is designed for medium-depth internal machining and provides good access within common lathe envelopes. How is concentricity and vibration control achieved? Concentricity and vibration damping are achieved through the 20 mm shank and the bar’s balanced construction, which together improve surface finish and repeatability. Can the boring bar be mounted in standard tool holders? Yes, the bar is intended for use with standard turning tool holders compatible with a 20 mm shank and indexable insert systems, facilitating easy integration. What routine maintenance is required? Routine maintenance is limited to periodic insert replacement and verification of clamping torque; no specialised maintenance is required for normal workshop use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of robust compatibility and tight finishing capability for a reliable internal boring cycle; the combination of a CCMT 0602 indexable insert system, a diameter range of Ø25–32 mm and a compact overall length of 72 mm supports stable, repeatable results in steel turning. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Boring tool for CCMT 0602 indexable inserts (THKB102TM) — Ø25–32 mm, M12 by Teknik Makina The Boring tool for CCMT 0602 indexable inserts is an internal boring bar engineered for precision steel machining and finishing across a 25–32 mm diameter band Compatible with CCMT 0602 indexable inserts Diameter range Ø25–32 mm Fine finishing capability 0.02 mm M12 mounting, overall length 72 mm High-precision finishing for repeatable tolerances This boring bar is designed to deliver consistent surface quality and dimensional accuracy when working on steel components. With a declared fine finishing capability of 0.02 mm, the tool enables tight tolerance attainment in finishing passes; the specification indicates the achievable surface control rather than a guaranteed single-cycle tolerance, and is best interpreted within a defined machining strategy (cutting data, insert geometry, clamping and machine rigidity). The use of indexable inserts reduces set-up time and keeps process repeatability high: worn edges can be replaced without regrinding the holder, maintaining productivity while controlling cost per part. The focus on measurable finishing performance supports planning for downstream processes such as heat treatment or assembly. Secure mounting and flexible application range The holder accepts standard CCMT 0602 inserts and is engineered for secure attachment via an M12 thread, providing a rigid connection that limits vibration and improves tool life. The tool’s effective working span covers Ø25–32 mm, which makes it suitable for common internal boring diameters encountered in component manufacturing. Shorter overhang and a compact 72 mm overall length reduce leverage at the cutting edge, lowering the risk of chatter and enabling higher surface quality at typical cutting speeds for steel. For workshops employing indexable turning systems, the component simplifies inventory by aligning with widely used insert types and geometries. Built for stable steel turning with efficient handling Constructed for demanding steel machining tasks, the holder balances rigidity with a low mass—its listed weight of 0.194 kg contributes to easier handling during tool changes while preserving stability during cuts. The indexable insert concept means faster recovery from tool wear and straightforward insert replacement, which supports continuous operation on production lines and small-batch shops alike. Where attention to cycle time and part quality is required, the combination of compatible insert format and compact geometry allows process optimisation: fewer tool change interruptions and predictable finishing outcomes support higher overall throughput and lower scrap rates. For application-specific recommendations or to procure the Teknik Makina boring tool THKB102TM through Metav Werkzeuge, request a tailored machining consultation from the Emmerich team or arrange purchase via the Metav Werkzeuge sales desk. Technical data Article number: THKB102TM Manufacturer: Teknik Makina ECLASS: 21041590 Facts Diameter range: Ø25–32 mm Overall length: 72 mm Thread: M12 Fine finishing: 0.02 mm Weight: 0.194 kg Special features Compatible with CCMT 0602 indexable inserts Suitable for steel machining Indexable insert system for fast edge changes Compact design for reduced overhang FAQ What insert type fits this boring holder? The holder is compatible with CCMT 0602 indexable inserts; the design accepts the standard CCMT insert geometry used in turning and finishing applications. Which diameter range is covered by the tool? Internal machining across Ø25–32 mm is supported, making the tool suitable for medium-diameter bore finishing and turning operations. What is the declared finishing capability? A fine finishing capability of 0.02 mm is specified, which refers to achievable control during finish passes under appropriate machining conditions with correct insert geometry and machine rigidity. How is the tool secured in the spindle or adapter? Mounting is provided via an M12 thread, offering a rigid connection that reduces vibration and supports stable cutting performance. Is this tool suitable for heavy roughing operations? The design is optimised for finishing and internal boring where indexable inserts and reduced overhang are advantageous; for heavy roughing, a holder with a larger cross-section or specific roughing geometry is generally recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of a compact design and compatibility with common indexable inserts ensures reliable boring operations and straightforward tooling management; order the cartridge directly via Metav Werkzeuge or consult the specialists for application advice. Cartridge THB03TM — 09–18 mm boring-tool cartridge, compatible with CCMT 0602 (Teknik Makina) A Cartridge THB03TM engineered for boring-tool sets to cover internal diameters from 09–18 mm, designed for use with CCMT 0602 indexable inserts. Suitable for 09–18 mm boring diameters Compatible with CCMT 0602 inserts Retained with M2.5 x 4.7 Torx screw Torx interface: T8 Consistent insert compatibility reduces tooling complexity The Cartridge THB03TM is built to accept CCMT 0602 indexable inserts, a widely used size in metalworking. This compatibility delivers clear operational benefits: interchangeability between toolholders and inserts reduces inventory variety and simplifies reordering. For workshops that fit multiple machines, the result is less idle time due to changeovers and lower overall tooling expenditure. The use of internationally established insert standards also supports predictable machining results and easy sourcing of replacements. Secure clamping for reliable repeatability A small but decisive component is the retaining hardware: the cartridge secures inserts with an M2.5 x 4.7 Torx screw and uses a T8 Torx interface. This configuration provides secure clamping with consistent torque transfer, which improves repeatability of the cutting edge position and reduces vibration during boring passes. For production environments where tolerance and surface finish matter, the result is fewer reworked parts and steadier cycle times. Simple handling that saves workshop time The cartridge’s straightforward design focuses on fast insert changes and uncomplicated maintenance. The Torx screw arrangement is compatible with common torque tools, allowing rapid exchange of inserts without specialised equipment. Fewer, faster tool changes translate into shorter machine downtime and higher effective machining time per shift, which is particularly valuable for small serial runs or mixed-batch production where agility matters. Designed for integration into standard boring systems Engineered for use within established boring-tool sets, this component fits into conventional toolholders and supports a range of internal machining tasks. The compact construction contributes to good accessibility inside bores while maintaining the rigidity required for stable cuts. For engineers and workshop managers, the benefit is a predictable upgrade path: the cartridge brings standardisation and robustness without complex retrofitting. For procurement or to verify fitment in a specific boring setup, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to source the Teknik Makina Cartridge THB03TM and confirm suitability for the intended application. Technical Data Article number: THB03TM Manufacturer: Teknik Makina Designation: Cartridge 09–18mm for Boring Tool eClass: 21041590 Numbers / Core Technical Data Diameter range: 09–18 mm Screw size: M2.5 x 4.7 Torx key size: T8 SKU: THB03TM Special features / Versions Compatible with CCMT 0602 indexable inserts Designed for boring-tool sets Secure clamping via Torx retaining screw Compact design for internal machining accessibility FAQ Which insert type fits the cartridge? The Cartridge THB03TM is designed for CCMT 0602 indexable inserts, enabling use of a common insert geometry for turning and boring tasks. What is the clamping method used? Clamping is achieved with an M2.5 x 4.7 Torx screw; the retaining interface corresponds to a T8 Torx key for tightening and removal. What internal diameters does this cartridge cover? The cartridge covers internal boring diameters from 09–18 mm, making it suitable for a broad range of small to medium bores. Is the cartridge suitable for heavy-duty machining? The cartridge is intended for standard boring-tool systems; its secure screw clamping supports stable performance, while final suitability depends on cutting parameters and machine rigidity. Can this cartridge be used with other insert manufacturers? Yes — any insert manufactured to the CCMT 0602 standard should be compatible, subject to the insert thickness and cutting geometry matching the toolholder setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Achieve repeatable fine finishing with a robust boring solution that accepts standard CCMT 0602 inserts and delivers consistent results to 0.01 mm. Order this tool directly via Metav Werkzeuge or consult our specialists for an installation and application review. Boring bar for fine finishing — compact finishing tool, 50 mm cutting diameter, accepts CCMT 0602 The Boring bar for fine finishing is designed for precision metalworking and fine-bore operations in small-series production and toolroom environments, combining a rigid shank and standard insert compatibility for predictable surface quality. Fine finishing down to 0.01 mm Suitable for CCMT 0602 inserts Maximum cutting diameter 50 mm Robust 25 mm shank, 165 mm overall length Predictable surface quality and what 0.01 mm means for production For finishing operations, control over dimensional and surface tolerances is crucial. The tool’s ability to achieve a 0.01 mm finish tolerance reduces rework and minimises scrap by producing consistent bore geometry on each pass. That level of accuracy is especially beneficial in precision engineering, where mating parts must meet tight clearances; the combination of a stable toolholder and a controlled cutting length ensures a smoother finish and lower vibration during machining. Explaining the figure: 0.01 mm refers to achievable machining repeatability under appropriate process parameters, indicating the tool’s suitability for high-precision finishing cycles. Compatibility with standard inserts and a construction that reduces vibration Designed to accept CCMT 0602 indexable inserts, the machining system simplifies inventory and tool change routines while enabling fast reconditioning of the cutting edge. The bar’s 25 mm shank and substantial overall length of 165 mm provide rigidity for off-centre operations and improved chatter resistance compared with slender holders. A maximum cutting diameter of 50 mm and a cutting-shank length of 109 mm allow access to moderate-depth bores while maintaining stiffness. Using standard inserts supports predictable cutting behaviour and easier procurement for production environments. Practical benefits for set-up time and repeatability on the shop floor A straightforward clamping concept and compatibility with well-known insert geometries shorten tool set-up and replacement cycles. The moderate mass (approx. 1.085 kg) and well-balanced geometry contribute to steadier rotation and reduced need for frequent re-adjustments, which in turn saves operator time between jobs. For batch production and short runs, the tool’s stable performance provides reliability over repeated set-ups, supporting efficient process planning and consistent part quality without complex adjustments. Recommended applications and typical users This finishing boring solution is aimed at precision engineering shops, maintenance workshops and small-scale production lines where repeatable finish and dimensional control matter. Typical applications include final bore sizing, bearing seat finishing and stepped bore finishing where a reliable surface and tight tolerance are required. The tool is compatible with standard machining centres and lathes that accept indexable insert tooling and benefits teams looking to reduce tool complexity while preserving finish quality. Contact Metav Werkzeuge for a tailored application review of Teknik Makina’s boring bar — our team in Emmerich can advise on insert choices, set-up and compatibility; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: THKB134TM Manufacturer: Teknik Makina ECLASS: 21041590 Facts Maximum cutting diameter: 50 mm Finish capability: 0.01 mm Shank diameter: 25 mm Cutting length (shank): 109 mm Overall length: 165 mm Weight: 1.085 kg Special features For indexable inserts CCMT 0602 Intended application: fine finishing Diameter (d): 40 FAQ What level of finish can be expected with this boring bar? The boring bar for fine finishing is specified for repeatable results to 0.01 mm, delivering a controlled surface quality when used with appropriate inserts and machining parameters. Which inserts are compatible with the tool? Compatibility is provided for CCMT 0602 indexable inserts; Teknik Makina’s design accepts these standard inserts for easy replacement and predictable cutting performance. Is the tool suitable for small-batch production? Yes, the tool’s rigidity, standard insert use and straightforward clamping make it well suited to small-batch production and toolroom finishing tasks. What are the key dimensions to check before ordering? Important dimensions include a maximum cutting diameter of 50 mm, a 25 mm shank and an overall length of 165 mm (SKU THKB134TM), which determine fitment and access in the machine setup. Can this boring solution be used for stepped bores and bearing seats? The design supports fine finishing of stepped bores and bearing seats when combined with the correct insert geometry and cutting parameters; Teknik Makina’s configuration is optimised for those tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine high rigidity with insert flexibility for reliable internal machining: the solid 20 mm shank, 100 mm cutting length and compatibility with CCMT 0602 indexable inserts deliver precise bore finishes and reduced setup time; order the tool via Metav Werkzeuge or consult their specialists for application advice. TKB102TM — Teknik Makina internal boring bar, CCMT 0602, Ø23 mm The TKB102TM is an internal boring bar engineered for precision CNC internal turning and boring operations, designed to accept CCMT 0602 indexable inserts for efficient workshop integration. Compatible with CCMT 0602 inserts Cutting diameter up to 28 mm 100 mm effective cutting length Solid 20 mm tool shank Stable machining for precise bore tolerances The TKB102TM combines a 20 mm shank with a compact overall length to provide high rigidity during internal machining. A rigid toolholder reduces vibration and tool deflection, which directly improves roundness and surface finish on internal bores. The specified Ø23 mm diameter and low mass (0.347 kg) keep inertial loads manageable while maintaining stability at moderate spindle speeds. For operations where dimensional accuracy matters, the reduced runout risk leads to fewer reworks and more consistent production runs. Insert compatibility that speeds up setup and reduces costs Acceptance of the CCMT 0602 indexable inserts makes the boring bar an economical choice for shops that favour quick insert changes. Indexable inserts allow repeated tool reuse with consistent geometry; when a cutting edge wears, a fresh insert restores performance without regrinding solid tooling. This configuration reduces downtime and tooling costs while keeping cutting parameters repeatable. For those new to insert systems: indexable inserts are small, replaceable cutting tips available in a range of grades and coatings suited to different materials. Durable geometry for consistent cycle times A 100 mm cutting length paired with a 150 mm overall length gives useful reach for deeper bores while keeping the tool compact enough for stable clamping. The combination of cutting length and shank diameter is designed to balance access and stiffness, which helps maintain cycle times by allowing slightly more aggressive feeds without compromising accuracy. Where reach is required, this geometry can reduce the need for intermediate setups, aiding throughput in small to medium series production. Practical applications and workshop fit Primarily intended for internal turning and boring on CNC lathes, this boring bar suits finishing and mid-depth boring tasks where indexable insert technology offers the best compromise between cost and accuracy. The tool’s compatibility with standard CCMT inserts simplifies inventory management and enables rapid tool changes on the shop floor. For optimal results, pair the bar with a rigid toolholder and ensure correct insert grade selection for the workpiece material and cutting conditions. For ordering or tailored technical advice on application and insert selection, contact Metav Werkzeuge — Metav’s specialists can advise on tooling setup and availability: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKB102TM Manufacturer: Teknik Makina ECLASS: 21181208 Facts Cutting diameter (max): 28 mm Nominal diameter: 23 mm Overall length: 150 mm Cutting length: 100 mm Shank diameter: 20 mm Weight: 0.347 kg Special features For indexable inserts: CCMT 0602 Solid shank design Suited to internal boring on CNC lathes FAQ What insert type does this boring bar accept? The TKB102TM accepts CCMT 0602 indexable inserts, a common format that supports quick edge changes and a wide range of grades for different materials. What are the key dimensions of the tool? Key dimensions are an overall length of 150 mm, a cutting length of 100 mm and a shank diameter of 20 mm, providing a balance of reach and rigidity for internal machining. What maximum bore diameter can be machined? The tool is specified for cutting diameters up to 28 mm, with a nominal diameter reference of 23 mm for typical applications. Is the tool suitable for deep internal bores? The 100 mm cutting length makes the TKB102TM suitable for moderate-depth internal bores; for much deeper operations, evaluate tool overhang and clamping to maintain rigidity. Which materials are recommended for use with this boring bar? Material selection depends on insert grade; the TKB102TM itself is compatible with standard CCMT insert grades, so choose inserts optimised for the target material and cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a tool that combines high material removal with precise groove control: the cutter’s Ø63 mm diameter and 8 cutting edges deliver consistent T-slot profiles while the robust shank Ø32 mm ensures stable clamping for industrial milling operations. Order via Metav Werkzeuge or request procurement support from our consultants for fast, reliable supply. Teknik Makina T-slot milling cutter »T-Nut Fräser« – indexable-insert cutter, Ø63 mm, for CCMT 0602 Teknik Makina T-slot milling cutter designed for machining T-slots and nut grooves in industrial and workshop environments, compatible with CCMT 0602 indexable inserts and built for repeatable precision. T-slot milling cutter Ø63 mm diameter Accepts CCMT 0602 indexable inserts 8 cutting edges for efficient material removal Shank Ø32 mm with 37 mm cutting shank Consistent groove geometry for reliable assembly lines The T-slot milling cutter provides repeatable groove profiles essential for fixtures, machine tables and assembly components. With a Ø63 mm cutting body and a defined cutting height of 9 mm, the tool produces uniform T-slots that reduce downstream fitting time and scrap rates. The combination of diameter and cutting height ensures stable chip evacuation and predictable chip thickness, which in turn supports consistent surface finish and tolerance adherence during serial production. Proven indexable system for economical performance Designed for use with CCMT 0602 indexable inserts, this cutter lowers running costs through fast insert changes and consistent cutting geometry. The use of well-known insert grades allows optimisation of cutting parameters for different materials; the indexable system enables rapid recovery from wear without regrinding, leading to higher uptime and controlled unit costs. The tool’s multiple cutting edges mean each indexable plate contributes to effective stock removal and improved cycle times in repetitive milling tasks. Robust shank and secure assembly for vibration control A shank Ø32 mm provides a rigid connection to the holder and reduces deflection during moderate to heavy cuts. The reduced vibration improves tool life and part accuracy; clamping stability is further supported by the specified Torx screw M2.5×5.5 and T8 key interface for the insert seat, ensuring secure fixation of inserts under load. The effective arrangement of the cutting edges around the body helps to balance radial forces, which is advantageous when integrating the cutter into CNC routines where consistent positional accuracy is required. Practical workshop integration and maintenance advantages The cutter’s layout and overall length of 125 mm make it straightforward to program into tool libraries and set up on milling machines with standard holders. With 8 cutting edges distributed across the body and a shank cutting length of 37 mm, maintenance cycles are predictable and replacement logistics are simplified. The tool’s moderate mass (0.842 kg) balances rigidity with handling convenience during tool changes, while the indexable system supports a straightforward spare-parts strategy for procurement teams. For specification checks, procurement guidance or delivery planning for Teknik Cutting Tools’ T-slot milling cutters, contact Metav Werkzeuge in Emmerich for expert assistance and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKC120TM Manufacturer: Teknik Makina SKU: TKC120TM Facts Diameter: 63 mm Cutting edges: 8 Overall length: 125 mm Cutting height: 9 mm Special features For indexable inserts: CCMT 0602 Shank diameter: 32 mm Shank cutting length: 37 mm Shank diameter at cutting head: 19.5 mm Torx screw: M2.5×5.5 Torx key: T8 Weight: 0.842 kg FAQ What materials can this cutter machine effectively? The T-slot milling cutter is configured for general industrial use; tool performance depends on the chosen CCMT 0602 insert grade and machining parameters to suit steel, aluminium or other machinable substrates. How many cutting edges does the tool use and what is the benefit? The tool has 8 cutting edges, which distribute cutting forces for improved surface finish and higher stock-removal rates in serial milling operations. Which insert type is compatible with this cutter? CCMT 0602 indexable inserts are the specified fitment, enabling quick index changes and flexible grade selection for different applications. What are the key dimensions for setting up the cutter in a tool library? Key set-up values include a diameter of 63 mm, overall length 125 mm, shank diameter 32 mm and cutting height 9 mm; these dimensions support programmed offsets and holder selection. Is the cutter suitable for heavy roughing or fine finishing? With the correct CCMT insert grade and appropriate feeds, the cutter can be used for both moderate roughing and semi-finishing tasks; insert choice determines the final surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, right-hand clamping solution with a 95° cutting angle and secure compatibility with CCMT 0602 indexable inserts for reliable external turning; order the holder via Metav Werkzeuge or consult their specialist team for application advice. SCLC Clamping Holder (SCLCR 1212) – Right-hand, for CCMT 0602 inserts (Teknik Makina) The SCLC for CCMT Indexable Inserts is a right-hand external turning holder designed for repeatable clamping of CCMT 0602 inserts in medium-duty turning applications across production and job-shop environments. Right-hand external turning holder Holds CCMT 0602 indexable inserts SCLCR 1212 ISO shank profile 95° cutting angle; 110 mm overall length Consistent cutting geometry for repeatable results The holder maintains a precise 95° cutting angle, which stabilises the cutting geometry and ensures consistent chip flow in common turning operations. Thanks to the defined angle and the SCLCR 1212 shank profile, the tool reduces the need for repeated setup adjustments, delivering measurable time savings in series production. The robust clamping interface is compatible with CCMT 0602 inserts and supports predictable tool life when used with suitable grades, enabling shops to plan tool-change intervals with greater confidence and less downtime. Reliable insert retention that enhances surface finish A secure insert seat and retention system minimise micro-movement during cuts, improving surface finish and feature accuracy. The clamping concept, tailored for CCMT-style inserts, provides solid clamping and straightforward insert indexing, which helps to maintain tolerances across batches. For operations prioritising dimensional stability, this holder offers a practical balance between rigidity and accessibility, so set-up times are reduced while delivering better part-to-part consistency. Compact shank dimensions for versatile machine mounting With a shank height and width of 12 mm and an overall length of 110 mm, the holder fits tight toolpost layouts where space is limited. The compact dimensions make it suitable for multi-station turrets and smaller lathes without compromising the working envelope. At a weight of 0.147 kg, the assembly contributes minimally to toolhead inertia, which can improve dynamic response when performing light to medium cuts and when switch-over between tools is frequent. Practical choice for everyday turning workflows Engineered for common turning tasks, the holder pairs well with a range of carbide grades chosen for steel and general-purpose materials. Its right-hand orientation and ISO designation provide quick identification for toolroom inventories, simplifying tool management and reorder processes. The combination of a recognised shank format and standard insert compatibility allows for easy integration into existing tooling systems, supporting efficient workshop logistics and predictable production throughput. For dependable turning performance choose the Teknik Makina SCLC clamping holder — contact Metav Werkzeuge in Emmerich for tailored application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: D424TM Manufacturer: Teknik Makina ISO designation: SCLCR 1212 Compatible inserts: CCMT 0602 Tooling bar designation: J06-F Facts Cutting angle: 95° Overall length: 110 mm Shank height: 12 mm Shank width: 12 mm Cutting-head width: 12 mm Weight: 0.147 kg Special features Right-hand external turning holder SCLC design for CCMT indexable inserts Secure insert clamping for repeatable cuts FAQ Which inserts fit this holder? The SCLC clamping holder accepts CCMT 0602 indexable inserts; insert seating is designed for standard CCMT geometry. Is the holder suitable for left-hand turning? This model is a right-hand holder; for left-hand operations a left-hand counterpart is required. What is the ISO designation for identification? The tool is specified as SCLCR 1212, matching common ISO shank profiles for external turning holders. Can this holder be used on small lathes? With a compact shank (12 mm × 12 mm) and 110 mm overall length, the holder is appropriate for constrained toolpost spaces and smaller turret arrangements. How does the cutting angle affect machining? The 95° cutting angle supports controlled chip flow and stable cutting geometry, which aids surface finish and repeatability in standard turning tasks. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise finishing with a stable shank and wide compatibility: the combination of a 0.01 mm finishing tolerance, compatibility with CCMT 0602 indexable inserts and a rigid 25 mm shank helps maintain consistent surface quality and repeatable results. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Ausdrehwerkzeug für die Feinbearbeitung — internal boring tool, accepts CCMT 0602 inserts, Ø 32 mm The Ausdrehwerkzeug für die Feinbearbeitung is an internal boring tool engineered for fine finishing in turned components, combining controlled cutting engagement with straightforward insert replacement. Precision finish to 0.01 mm Holds CCMT 0602 indexable inserts 25 mm shank for increased rigidity 160 mm overall length for deeper bores Engineered for repeatable precision and consistent surface quality The design targets finishing operations where tight form and surface requirements are crucial. With a specified finishing capability of 0.01 mm, the tool reduces the need for secondary processes by producing a more consistent bore dimension on the first pass. The combination of a well-proportioned cutting geometry and controlled overhang minimises chatter and delivers a repeatable surface, which directly lowers scrap rates and rework time. The use of established insert geometry means the cutting edge can be renewed quickly, preserving the initial machining quality over longer production runs. Stable shank and balanced geometry for reliable cutting performance Rigidity is central to achieving fine finishes, and the holder’s 25 mm shank and compact form provide improved rigidity compared with slender alternatives. That stability translates into less tool deflection, better dimensional control and extended insert life. The tool’s Ø 32 mm body and mass distribution reduce vibration in medium-depth bores, assisting consistent chip formation and a cleaner contact zone between insert and workpiece. These mechanical advantages are particularly relevant when machining softer alloys or when tight roundness and surface roughness values are specified. Simple compatibility and practical setup for efficient workflows Compatibility with CCMT 0602 indexable inserts enables the use of a wide range of grades and chip breakers to match different materials and cutting speeds. The tool accepts inserts commonly stocked in machine shops, simplifying logistics and reducing downtime. With a maximum effective cutting diameter near 40 mm, a cutting-to-shank length of 104 mm and an overall length of 160 mm, the boring bar adapts to many internal turning tasks. The combination of standardised inserts and a conventional clamping interface means the rig can be set up rapidly and adjusted without special fixtures. Versatile choice for independent workshops and production lines Whether integrated into a jobbing shop or a longer production cell, this boring bar offers a rational balance of precision and practicality. Its measured stiffness and standard insert format support both one-off precision components and batches where consistent finish is required. Through predictable performance and proven insert compatibility, the tool assists in reducing process variability and supports steady throughput — a clear operational advantage when meeting tight tolerances and delivery commitments. Contact Metav Werkzeuge for tailored cutting recommendations on Teknik Makina boring tools and ensure the selected configuration matches specific component tolerances and machine capabilities Technical data SKU: THKB128TM Manufacturer: Teknik Makina Finishing capability: 0.01 mm For indexable inserts: CCMT 0602 Core measurements Cutting diameter max: 40 mm Shank diameter: 25 mm Cutting-shank length: 104 mm Overall length: 160 mm Diameter: 32 mm Weight: 0.76 kg Compatibility & features For fine finishing operations Indexable insert system CCMT 0602 Designed for reduced vibration and improved rigidity FAQ Which insert type is required for this boring bar? The boring bar is designed for CCMT 0602 indexable inserts; using the correct grade and chip breaker adapts the tool for different materials and surface finish requirements. What is the maximum bore diameter achievable with this tool? The tool supports a cutting diameter up to 40 mm, making it suitable for many internal finishing tasks in turning applications. How does the 25 mm shank influence machining performance? A 25 mm shank increases rigidity and reduces deflection compared with smaller shanks, improving dimensional control and extending insert life during fine finishing cycles. Is the tool suitable for automated production runs? Yes—its standard insert format and stable geometry make it suitable for repetitive production where consistent finishing and quick insert changes are required. What level of dimensional accuracy can be expected? Designed for fine finishing, the tool supports a finishing capability of around 0.01 mm, helping to meet tight bore tolerances when used with appropriate machine settings and insert grades. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-stiffness design and proven compatibility with CCMT 060204 indexable inserts to improve rear-side deburring and countersinking efficiency; order the tool directly via Metav Werkzeuge or request specialist advice from our consultants. Back countersink for CCMT 060204 — 20 mm shank, Ø 10 mm nominal A back countersink Back countersink for CCMT 060204 engineered for precise rear-side chamfering and deburring in milling applications, using indexable inserts for fast tool servicing. Back countersink for CCMT 060204 inserts 20 mm shank for high stability 10 mm nominal diameter, Ø 18 mm max cutting Quick insert fix with Torx M2.5x5.5 Consistent back-side finishing with indexable inserts The tool delivers reliable rear-side chamfering by using indexable inserts (CCMT 060204), which allow rapid refresh of the cutting edge without regrinding. The combination of a 20 mm shank and a stiff body reduces deflection under load, improving surface finish and repeatability on the machined component. In practical terms, fewer reworks and a steadier process mean shorter cycle times and more predictable production planning for workshops and small series manufacturers. Fewer interruptions and straightforward maintenance Designed around a single replaceable cutting edge, the countersink simplifies chip flow and reduces setup complexity. The supplied fastening specification — Torx screw M2.5x5.5 secured with a T8 key — enables quick insert changes and reliable clamping torque, cutting downtime during shift changes. The modest overall length of 110 mm and a tool weight of 0.194 kg make the tool easy to handle while maintaining concentricity in toolholders, which benefits both tool life and the life of the inserts. Practical benefits for workshop integration Compatibility with standard CCMT 060204 inserts means stocked carbide insert grades can be used immediately, supporting flexible production planning. The nominal 10 mm diameter and a maximum cutting diameter of 18 mm provide a useful operating window for a range of deburring and countersinking tasks, while the single cutting edge supports predictable chip formation. The result is a compact, efficient solution that helps maintain throughput without complex tooling changes. For precise rear-side countersinking and fast insert replacement choose Teknik Cutting Tools via Metav Werkzeuge — contact Metav Werkzeuge for availability and tailored technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: C100TM Manufacturer: Teknik Makina Item name: Back countersink for indexable inserts CCMT 060204 Facts Nominal diameter: 10 mm Cutting diameter max: 18 mm Shank diameter: 20 mm Overall length: 110 mm Cutting edges: 1 Weight: 0.194 kg Special features Suitable inserts: CCMT 060204 Torx screw: M2.5x5.5 Torx key: T8 Application: milling FAQ Which indexable inserts fit this countersink? This back countersink is compatible with CCMT 060204 indexable inserts as specified for the Teknik Makina tool (SKU C100TM). What shank diameter is required for stable clamping? The tool uses a 20 mm shank, which provides increased stiffness and stable clamping in standard toolholders. What is the maximum cutting diameter for rear countersinking? The maximum cutting diameter for this countersink is 18 mm, with a nominal diameter of 10 mm for common operations. How is the insert secured and which key is needed? Inserts are fastened with a Torx screw M2.5x5.5; a T8 Torx key is specified for secure and quick replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient T-slot production with replaceable CCMT 0602 indexable inserts, a cutting diameter of Ø21 mm and a compact shank Ø16 mm delivers consistent slot quality and low tool-change downtime — order the cutter directly via Metav Werkzeuge or consult our advisors for selection and delivery. T-slot cutter by Teknik Makina — Ø21 mm, for CCMT 0602 inserts The T-slot cutter is a precision milling tool designed to produce accurate T-slots and undercuts with indexable inserts, suitable for workshop and CNC applications where reliable slot geometry is required T-slot cutter for CCMT 0602 inserts Cutting diameter Ø21 mm for precise slots Shank Ø16 mm, overall length 100 mm Two cutting edges, 9 mm cutting height Faster slotting with repeatable geometry and fewer tool changes The cutter combines the economy of indexable inserts with stable cutter geometry to reduce cycle time and maintain repeatable slot dimensions. Fitted for CCMT 0602 inserts, the tool offers efficient chip removal while limiting downtime for insert changes. The two cutting edges and 9 mm cutting height support consistent results on repeated passes; this configuration is particularly effective where profile accuracy and process stability drive production throughput. The robust design minimises vibration and supports tight tolerances without sacrificing feed rates. Secure clamping and compact design for steady machining A shank Ø16 mm and an overall length of 100 mm provide a compact, rigid mounting that improves concentricity and reduces deflection during milling. The cutter’s reduced mass (0.151 kg) contributes to easier handling and faster tool changes at the machine, while the shank-cutting diameter of 11 mm and the 31.5 mm cutting shank length ensure reliable engagement with standard holders. Insert retention is provided via a Torx M2.5x3.5 screw operated with a T8 key, enabling quick, secure insert replacement and simple clamping torque control to maintain cutting stability across shifts. Practical compatibility, workshop support and supply reliability Marked as TKC098TM, this Teknik Makina tool is specified for compatible CCMT 0602 indexable inserts and is intended for precision T-slot machining in general workshop and CNC settings. The modular insert concept lowers consumable costs and simplifies inventory management compared with solid cutters. Combined with Metav’s decades of tooling experience and wide product range, procurement and technical advice are available for integration into production workflows. Metav’s established supply chain from Emmerich and a customer base of over 48,000 underline dependable delivery and consistent quality for industrial users. Contact Metav Werkzeuge for tailored advice on the Teknik Makina T-slot cutter TKC098TM and for rapid supply from Emmerich — our consultants will recommend the correct inserts and mounting options to fit the application Technical data Article number: TKC098TM Manufacturer: Teknik Makina Diameter: 21 mm Cutting edges: 2 Cutting height: 9 mm Overall length: 100 mm Shank diameter: 16 mm Shank cutting diameter: 11 mm Shank cutting length: 31.5 mm Weight: 0.151 kg Compatible inserts: CCMT 0602 Insert screw: Torx M2,5x3,5 Torx key: T8 Replaceable indexable inserts Designed for T-slot cutting applications FAQ Which inserts fit this cutter? The Teknik Makina T-slot cutter TKC098TM uses CCMT 0602 indexable inserts; these are the specified insert geometry for correct seat and clearance. What are the key dimensions to check for mounting? Relevant dimensions are the Ø21 mm cutting diameter, shank Ø16 mm and overall length 100 mm; confirm holder bore and clamping depth before mounting. How is the insert secured on the tool? Inserts are fastened with a Torx screw (M2.5x3.5) tightened using a T8 key to ensure secure clamping and repeatable seating. How many cutting edges does the tool have and what is the cutting height? The cutter has two cutting edges and a cutting height of 9 mm, configured for consistent slot depth across multiple passes. Is the cutter suitable for production use with indexable inserts? Yes, the TKC098TM is built for repeatable production slotting using replaceable CCMT 0602 inserts to reduce downtime and consumable costs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of precise insert compatibility, a stable 20 mm shank and a 50 mm effective cutting length to secure repeatable internal bores; order directly via Metav Werkzeuge or consult our specialists for application advice. Boring Tool TKB100TM (Teknik Makina) — 20 mm shank, for CCMT 0602 inserts Boring Tool TKB100TM is a precision internal boring holder designed for CNC lathes and milling machines, optimised for CCMT 0602 indexable inserts and medium-reach operations. CCMT 0602 insert compatibility 20 mm solid shank for stable clamping 50 mm effective cutting length Max cutting diameter 28 mm Accurate insert compatibility for consistent bore quality The holder is engineered for CCMT 0602 indexable inserts, which makes tool changes fast and repeatable. With a 50 mm effective cutting length and a maximum cutting diameter of 28 mm, the system is suitable for mid-range internal machining tasks where dimensional consistency is essential. Indexable inserts reduce downtime for tool regrinds and provide a measurable cost advantage in batch production, while established insert grades preserve edge life under varying cutting conditions. Stable shank and reach that reduce vibration A 20 mm shank provides a secure clamp interface that helps to maintain concentricity and reduce runout during cutting. The combination of a compact 100 mm overall length and a low mass of 0.298 kg limits overhang-induced deflection, which in turn improves surface finish and dimensional accuracy. These mechanical characteristics are particularly important when tight tolerances are required; the holder’s geometry is thereby designed to support efficient chip evacuation and minimise chatter during machining. Practical advantages for workshop and production environments The modular approach with indexable inserts simplifies inventory management and lowers per-part tooling costs in small-batch and series production. The tool’s compact design supports flexibility on conventional and CNC machines, enabling quick set-up and predictable cycle times. Metav’s position as a quality filter for Europe ensures reliable supply and technical guidance, offering purchasers the confidence that precision components are backed by experienced consultancy and a comprehensive product range. Contact Metav Werkzeuge today to discuss the Teknik Makina TKB100TM and secure a precision boring solution tailored to the application, delivered from our Emmerich stock and supported by our technical consultants. Technical Data Article number: TKB100TM Manufacturer: Teknik Makina Product: Boring tool Cutting diameter max: 28 mm Shank diameter: 20 mm Effective cutting length: 50 mm Overall length: 100 mm Weight: 0.298 kg Compatible insert type: CCMT 0602 Indexable insert holder design Compact, low-mass construction FAQ Which insert type fits this tool? The tool accepts CCMT 0602 indexable inserts; Teknika Makina’s TKB100TM is configured for this common insert geometry to simplify sourcing and changeover. What machines is the holder suited for? The holder is suitable for CNC lathes and milling machines where a 20 mm shank and a 100 mm overall length meet the required toolholder interface and reach. How does the shank diameter affect performance? A 20 mm shank improves clamping stability and reduces runout, which helps to maintain bore accuracy and surface finish during operations with the TKB100TM. Is this tool a good choice for small-batch production? Yes; the use of indexable inserts and the tool’s compact geometry make the TKB100TM a cost-effective solution for small-batch and repeatable production tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Data inconsistency detected for SKU TKC096TM (manufacturer: Teknik Makina). The specification for compatible indexable inserts is contradictory: one field indicates compatibility with CCMT 0602 inserts, while the product description text states compatibility with CCMT 09T3 inserts. These two insert designations refer to different insert sizes and geometries and cannot both be assumed correct. Because of this conflict, a reliable, production-ready product description cannot be generated. Please confirm which insert type is correct (CCMT 0602 or CCMT 09T3) or provide the definitive technical specification for the cutter’s insert pocket and seat. Once the correct insert compatibility is supplied, a complete, standards-compliant product text with full technical details, benefits and Metav Werkzeuge commercial information will be produced.

Take advantage of a compact, high-performance indexable disc cutter that pairs CCMT 0602 inserts with a 125 mm diameter and a 32 mm axial cutting depth for reliable milling throughput; order directly via Metav Werkzeuge or contact the consultants for application advice. Disc milling cutter DF172TM — indexable disc cutter, Ø125 mm, CCMT 0602 (Teknik Makina) A Disc milling cutter DF172TM engineered for indexable CCMT 0602 inserts, offering medium-depth milling capability for a wide range of workshop and production processes. Ø125 mm cutting diameter Compatible with CCMT 0602 inserts ap 32 mm axial cutting depth 14 cutting edges for sustained material removal 40 mm mounting diameter for solid clamping Increased productivity through optimised cutting geometry The first benefit of this tool is its focus on efficient material removal: with a Ø125 mm cutter body and 14 cutting edges, the design spreads cutting forces across multiple teeth to maintain a steady chip load and reduce vibration. The ap 32 mm axial depth enables deeper passes than comparable small-diameter cutters, which can cut cycle times and reduce the number of tool changes. This configuration suits repetitive milling tasks where process stability and throughput are priorities, delivering a measurable productivity improvement without complex setup changes. Quick maintenance and secure mounting to reduce downtime Maintenance and insert replacement are straightforward thanks to standard fastenings and a robust holder interface. The tool uses Torx screws (M2.5x7) secured with a T08 key and a 40 mm mounting diameter that mates with common tool holders for a secure fit. The cutting height 10 mm ensures enough insert projection for economical indexing and straightforward chip control. These features translate into lower downtime during routine service and predictable maintenance intervals, supporting continuous operation on the shop floor. Familiar indexable system for flexible tooling strategies Accepting CCMT 0602 inserts, the cutter ties into an established insert family that is widely available and offered in multiple grades. This compatibility enables flexible choices between grades and coatings to match cutting conditions, while the modest weight 0.703 kg keeps handling easy for manual tool changes and reduces centrifugal load during high-speed rotation. Backed by a reputable manufacturer and supplied through Metav’s logistics, the unit provides a practical balance of flexibility and reliability for milling operations where standardisation and rapid replenishment matter. Contact Metav Werkzeuge GmbH in Emmerich for tailored technical advice or to arrange supply of the Teknik Makina DF172TM disc milling cutter with CCMT 0602 compatibility; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DF172TM Name: Disc milling cutter Manufacturer: Teknik Makina Eclass: 21180704 ETIM: EC011860 Core specifications Diameter: 125 mm Axial cutting depth (ap): 32 mm Mounting diameter: 40 mm Cutting height: 10 mm Number of cutting edges: 14 Weight: 0.703 kg Materials & special features Compatible inserts: CCMT 0602 Torx screw: M2.5x7 Torx key size: T08 File references: 62de7eeebd24461b3d5f7a83, 62de7e5f33927e49dbf32752 FAQ What insert type does the cutter accept? The cutter is designed for CCMT 0602 indexable inserts, a common format that offers a variety of grades for different materials and cutting conditions. How deep can the tool cut in a single pass? The tool supports an axial cutting depth of 32 mm (ap 32 mm), enabling deeper passes than many small-diameter cutters while maintaining controlled chip engagement. What is the mounting interface for the cutter? The body has a 40 mm mounting diameter to fit standard holders and clamping systems, providing a rigid connection for stable milling. How are the inserts secured and serviced? Inserts are fastened with Torx screws M2.5x7 tightened using a T08 key, allowing quick insert changes and consistent clamp torque for minimal setup time. Is the cutter heavy to handle for manual tool changes? The cutter weight is approximately 0.703 kg, making it easy to handle during manual tool changes while remaining robust in operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the precise 36–56 mm clamping range and compatibility with CCMT 0602 inserts to reduce setup time and improve bore accuracy. The secure Torx T8 fastening with M2.5x5.5 screws delivers consistent repeatability under production conditions. Order the cartridge directly via Metav Werkzeuge or consult their specialists for tailored application support. Cartridge THB07TM (Kartusche) — 36–56 mm cartridge for boring tool set by Teknik Makina A Cartridge for modular boring tool sets, designed to secure indexable inserts for precise internal turning and adaptable bore diameters. Fitted for boring tool sets 36–56 mm range Compatible with CCMT 0602 indexable inserts Torx T8 screw and M2.5x5.5 fastening Robust component from Teknik Makina Faster set-up and reliable bore results The compact holder is built to simplify internal turning operations: the adjustable 36–56 mm clamping range removes the need for multiple fixed adapters, while compatibility with CCMT 0602 indexable inserts keeps tooling costs predictable. By standardising on a single, adaptable holder, machine time is maximised and changeover procedures are shortened. The combination of a defined insert fit and consistent clamping geometry supports repeatable bore diameters with fewer adjustments, contributing directly to improved process efficiency. Secure fastening for repeatability in production A robust fastening system using a Torx T8 driver and M2.5x5.5 screws ensures a reliable mechanical connection between the holder and the cutting insert. This configuration reduces the risk of loosening under load and minimises micro-movements that can affect finish and tolerance. The mechanical design emphasises precision and vibration resistance, attributes that matter in medium- to high-volume runs where consistent part quality and reduced rework translate into clear time and cost savings. Seamless integration with existing tooling systems The cartridge is intended for direct use within standard boring tool sets, enabling straightforward replacement or upgrade of existing tool holders. Marked under SKU THB07TM, the component was conceived for easy integration and clear identification in workshop inventories. Its compatibility with widely used insert geometries simplifies procurement and stock management for production teams. For workshops seeking to increase flexibility without extensive retooling, this holder offers a pragmatic route to improved internal turning capability. For secure, precise internal boring choose the Teknik Makina cartridge and contact Metav Werkzeuge in Emmerich for application advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: THB07TM Name: Kartusche EN designation: 36-56mm for Boring Tool Manufacturer: Teknik Makina Facts Compatible inserts: CCMT 0602 Torx key: T8 Torx screw: M2.5x5.5 ECLASS: 21041590 Special features For boring tool set SKU: THB07TM Story trigger: ausdrehwerkzeug FAQ What insert size does the cartridge accept? The cartridge accepts CCMT 0602 indexable inserts, which are specified for the holder to ensure correct seating and cutting geometry. Which clamping range is covered by this holder? The holder is designed for a clamping range of 36–56 mm, making it suitable for a range of internal bores within that span. What fastening hardware is required for installation? Installation uses a Torx T8 driver and M2.5x5.5 screws as supplied for secure mounting of the insert and holder. Is this component compatible with existing boring tool sets? Yes, the cartridge is intended for modular boring tool sets and is identified under SKU THB07TM for straightforward replacement and inventory control. Who manufactures this cartridge? The cartridge is produced by Teknik Makina and is supplied for workshop use where reliable internal turning and repeatability are required. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise T‑slot machining combined with reliable indexable‑insert compatibility and robust shank retention for uninterrupted production. Order the tool directly via Metav Werkzeuge or contact their specialists for technical advice and delivery from Emmerich. T-Nut Fräser — 25 mm, 4‑cut T‑slot cutter (Teknik Makina) The T-Nut Fräser is a purpose‑built T‑slot cutter for milling T‑grooves using indexable CCMT 0602 inserts, suitable for standard milling machines and powered toolholders. 25 mm cutting diameter, 4 flutes Compatible with CCMT 0602 inserts 20 mm shank diameter for secure clamping 100 mm overall length, 11 mm cutting height High‑precision T‑slot machining for consistent results This cutter delivers repeatable slot geometry through a stable flute configuration and a defined cutting height. The combination of a 25 mm diameter and 4 flutes ensures balanced chip evacuation and steady radial engagement, reducing vibration and runout. For workshops seeking reproducible T‑slot profiles, the tool provides a measurable improvement in surface consistency and setup reliability, supporting higher first‑pass yields and fewer reworks. Insert system and productivity benefits Designed for use with CCMT 0602 indexable inserts, the cutter reduces downtime by enabling fast insert changes without regrinding. The insert format offers established wear behaviour and a wide selection of grades, which translates into tailored solutions for typical industrial feeds and speeds. As a result, cycle times can be optimised while maintaining edge life, supporting a favourable cost‑per‑slot calculation in batch and series production. Secure mounting and cutting geometry that aids stability A 20 mm shank diameter with precisely machined interfaces improves clamping confidence in standard collets and chucks, lowering the risk of slippage under load. The tool provides a 32.5 mm cutting length on the shank and an 11 mm cutting height, enabling confident depth control for common T‑slot dimensions. This geometry simplifies process planning: a compact overall length of 100 mm helps reduce overhang, thereby improving dynamic rigidity during plunge and peripheral passes. Practical workshop advantages and handling With a mass of 1.232 kg, the cutter is substantial enough for stable cutting dynamics yet easy to handle during insert changes and setup. The tool accepts standard fastenings (Torx screw M2.5 x 3.5, Torx key T8) for secure insert retention, streamlining maintenance routines. Clear specification of shank and cutting dimensions supports CNC programme parameterisation and tool data entry in ERP or tool management systems, aiding a predictable production workflow. Contact Metav Werkzeuge today to discuss delivery options for the Teknik Makina T‑slot cutter TKC100TM or to request tailored machining advice directly from their Emmerich facility: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: TKC100TM Manufacturer: Teknik Makina Designation: T‑Nut Fräser Facts Cutting diameter: 25 mm Number of cutting edges: 4 Overall length: 100 mm Shank diameter: 20 mm Shank cutting length: 32.5 mm Cutting height: 11 mm Weight: 1.232 kg Special features Compatible inserts: CCMT 0602 Torx screw: M2.5 x 3.5 Torx key size: T8 Shank cutting diameter: 15 mm FAQ What type of inserts does the cutter use? The cutter is specified for CCMT 0602 indexable inserts, a common format that allows quick replacement and a wide selection of grades for different materials. Which machine setup is suitable for this T‑slot cutter? The tool is intended for standard milling machines and rigid toolholders where a 20 mm shank can be securely clamped; the compact 100 mm overall length helps minimise overhang. What are the key dimensions to enter in a tool manager? Relevant entries are cutting diameter 25 mm, overall length 100 mm, shank diameter 20 mm, and cutting height 11 mm for correct tool‑path calculation. How is insert retention handled on this cutter? Insert retention uses a Torx screw M2.5 x 3.5 tightened with a T8 key, providing stable clamping and easy maintenance without special tools. What is the product code for ordering or referencing? Refer to the SKU TKC100TM when ordering or requesting technical details from Teknik Makina or Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of flexible diameter coverage and secure Torx clamping for reliable internal boring operations; order the cartridge directly via Metav Werkzeuge or contact our consultants for compatibility checks and fast supply. Cartridge THB06TM – 28–44 mm cartridge for boring tool, CCMT 0602 compatible (Teknik Makina) The Cartridge THB06TM is a compact toolholder component designed for integration into boring tool sets to cover internal diameters from 28 to 44 mm and to accept indexable CCMT 0602 inserts for finishing and facing tasks. 28–44 mm cartridge range Compatible with CCMT 0602 inserts Fastening via M2.5x5.5 Torx screw Torx T8 key for secure adjustment Greater flexibility with a wide diameter range The 28–44 mm range allows a single holder to serve several internal bore diameters, reducing the number of changeovers in the tool room and streamlining setup routines. Thanks to compatibility with CCMT 0602 indexable inserts, the holder supports common carbide grades and geometries used for finishing cuts; this simplifies inventory management and accelerates turnaround, while the standardised insert form ensures predictable cutting behaviour and repeatable surface quality. Robust clamping for consistent finish and stability Secure clamping is provided by the M2.5x5.5 Torx screw, tightened with a T8 key, producing a reliable mechanical connection between insert and holder. Stable fixation minimises micro-vibration during light finishing passes, which directly contributes to improved surface integrity and dimensional consistency. The straightforward Torx fastening system also enables rapid insert changes while maintaining the repeatability required in CNC turning and boring operations. Efficient integration into workshop toolsets Designed for use within established boring tool sets, this holder offers practical compatibility with standard toolholder interfaces and common insert types to support everyday machining operations. The cartridge form factor promotes quick replacement within a modular boring bar assembly, shortening machine downtime and supporting higher throughput in production. Specification THB06TM by Teknik Makina aligns with workshop requirements for modularity, precision and ease of maintenance. Contact Metav Werkzeuge today to specify the Cartridge THB06TM for integration into a boring tool set and to confirm CCMT 0602 insert compatibility—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: THB06TM Name: Cartridge (Kartusche) Application: 28–44 mm for boring tool Compatible inserts: CCMT 0602 Fastening screw: M2.5x5.5 (Torx) Adjustment key: T8 Torx Manufacturer: Teknik Makina eCl@ss: 21041590 Core data Diameter range: 28–44 mm Torx screw size: M2.5 x 5.5 Torx key: T8 SKU: THB06TM Special features Designed for boring tool sets Compatible with CCMT 0602 indexable inserts Secured by M2.5x5.5 Torx screw Adjustment with T8 Torx key FAQ What diameter range does the cartridge cover? The cartridge THB06TM covers internal diameters from 28 to 44 mm for boring operations. Which insert type fits this holder? The holder accepts CCMT 0602 indexable inserts for finishing and facing applications. What fastening method secures the insert? Securing is via an M2.5x5.5 Torx screw; adjustment and tightening are performed with a T8 Torx key. Is the cartridge suitable for standard boring tool sets? Yes, the design is intended for integration into modular boring tool sets and supports common indexable insert geometries. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust indexable-insert compatibility, a compact 32 mm arbor interface and a 100 mm diameter for reduced cycle times and stable series production; order the cutter directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. DF162TM Disc milling cutter – 100 mm diameter, for CCMT 0602 inserts (Teknik Makina) The DF162TM is a disc milling cutter engineered for efficient slotting and peripheral milling where secure insert clamping and repeatable results are required. Suitable for CCMT 0602 indexable inserts High rigidity with 32 mm arbor bore Twelve cutting edges for long tool life Cutting height 10 mm for deep engagement High-throughput machining with consistent chip removal The disc cutter is designed to deliver steady material removal in serial production. With a 100 mm diameter and 12 cutting edges, the configuration spreads cutting forces across multiple cutting points, which helps to reduce vibration and maintain cycle times. The combination of a moderate axial depth (24 mm) and a 10 mm cutting height provides a balance between productivity and tool life, making this cutter suitable for continuous operations that demand predictable output and fewer tool changes. Emphasis on measurable performance keeps preparation and planning times low. Secure insert clamping that simplifies maintenance A straightforward insert-and-screw fixing system reduces downtime during index changes. The cutter accepts CCMT 0602 inserts, a widely available geometry that simplifies logistics and reduces stock complexity. Fastener details—M2.5x7 Torx screws tightened with T08—ensure reproducible clamp torque and safe seating of the inserts. This straightforward assembly permits quick replacement and controlled maintenance procedures, supporting lean toolroom routines and lowering the risk of incorrect assembly. Compact arbor interface for rigid toolholding A 32 mm arbor bore provides a rigid connection to standard toolholders and arbors, improving concentricity and reducing runout. The compact interface benefits machines with limited spindle overhang by keeping mass close to the holder, which improves stability during side cutting and slotting passes. The resulting reduction in dynamic deflection supports tighter tolerances and a more consistent surface finish across batches. Design choices that reduce total process cost Using indexable inserts enables selective refurbishment of the cutting edge rather than replacement of the whole tool, which reduces consumable spend over time. The multiple-edge configuration and compatible insert geometry allow economical rotation and reuse of inserts, helping to make production more cost-efficient without compromising on quality. Where productivity gains are a priority, the cutter’s layout supports longer uninterrupted runs and a better parts-per-insert ratio. Practical handling and workshop integration At 0.453 kg, the cutter is light enough for practical handling during set-up yet engineered for industrial use. The DF162TM integrates into standard tool magazines and change routines with minimal adaptation. Clear labelling of fasteners and standardised insert formats reduces the likelihood of set-up errors and simplifies training for workshop staff, contributing to more predictable shift performance and lower rework rates. Support for specification and application decisions Technical compatibility with CCMT 0602 inserts and a 32 mm arbor makes specification straightforward when planning fixture and holder purchases. For applications requiring reliable slotting or face-milling with indexable inserts, the cutter offers a pragmatic balance of rigidity, serviceability and productivity. When questions about suitability arise, choosing a partner with applied precision expertise helps to bridge the gap between specification and on-floor reality. For reliable supply and application advice for the DF162TM disc milling cutter from Teknik Makina, contact Metav Werkzeuge – our consultants in Emmerich will advise on holder selection and insert choice to match the production requirement Technical data Article number: DF162TM Designation: Disc milling cutter Manufacturer: Teknik Makina Numbers / Core technical data Diameter: 100 mm Number of cutting edges: 12 Cutting height: 10 mm Maximum axial depth (ap): 24 mm Arbor bore: 32 mm Weight: 0.453 kg Special features / Versions For indexable inserts: CCMT 0602 Torx screws: M2.5x7 Torx key: T08 Compatible with standard 32 mm toolholders FAQ What insert type does the cutter use? The cutter is specified for CCMT 0602 indexable inserts; this insert format is widely available and supports economical edge changes. How many cutting edges are fitted to the cutter? The tool features 12 cutting edges, which spreads cutting loads and helps extend runtime between regrinds or insert changes. What arbor size is required for mounting? A 32 mm arbor bore is required; the compact interface improves rigidity and runout control when mounted correctly. Is the cutter balanced for high-speed use? The DF162TM is designed with a compact profile and multiple edges to reduce dynamic imbalance; specific balancing requirements should be checked against spindle speed and holder configuration. Which fasteners are used for insert clamping? Insert clamping uses M2.5x7 Torx screws tightened with a T08 key to ensure reproducible seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise cutting capacity and quick insert changes for reliable milling throughput; the 100 mm diameter and compatibility with CCMT 0602 inserts ensure efficient material removal and straightforward maintenance. Order the DF160TM directly via Metav Werkzeuge or consult our specialists for application advice. DF160TM — Indexable disc cutter, 100 mm diameter, 32 mm arbor (Teknik Makina) The DF160TM is an indexable disc cutter designed for medium‑duty milling and slotting operations, engineered to accept CCMT 0602 inserts for rapid tool reconditioning in workshop and production environments 100 mm diameter for broad milling passes 32 mm arbor for firm toolholder connection Accepts CCMT 0602 indexable inserts 12 teeth with 8 mm cutting height Faster material removal with predictable chip control The disc cutter delivers consistent performance during face and slot milling thanks to its 100 mm diameter and 12 teeth, which combine to increase the effective cutting surface and reduce the number of passes required. Using indexable inserts means that worn cutting edges can be replaced in seconds, restoring cutting geometry without regrinding; this keeps machine downtime to a minimum and improves overall equipment effectiveness. The design supports steady chip evacuation and helps maintain cut quality across longer production runs, so milling cycles run more predictably and with fewer interruptions. Secure mounting and easy insert fixation for reduced setup time A 32 mm arbor gives a robust connection to standard toolholders, reducing runout and improving stability at the cutting edge. Insert retention is achieved with a Torx screw M2.5x7, tightened with a T08 key, which ensures a reliable clamp force for repeatable positioning of each insert. The tool’s compact mass (approx. 0.365 kg) facilitates quick handling and makes tool changes less strenuous for operators; replacement of individual inserts rather than the whole cutter minimises consumable costs and simplifies stock management. Versatile use and straightforward maintenance for production environments Engineered to take CCMT 0602 indexable inserts, the cutter is suited to a range of medium‑hard materials when paired with appropriate grades and geometries of insert, making it a practical choice for small batches and flexible workshops alike. The 8 mm cutting height supports modest axial engagement while maintaining chip control and surface finish. Routine upkeep is limited to insert replacement and periodic inspection of the Torx fasteners, allowing maintenance schedules to remain lean and predictable and supporting continuous operation in a manufacturing setting. For dependable milling performance choose the Teknik Makina DF160TM with its 100 mm cutting diameter — contact Metav Werkzeuge for expert guidance and reliable supply from Emmerich. Technical data Article number: DF160TM Manufacturer: Teknik Makina Product: Indexable disc cutter Numbers / Core technical data Diameter: 100 mm Arbor / shank diameter: 32 mm Cutting edges / teeth: 12 Cutting height: 8 mm Weight: 0.365 kg Design / Special features For CCMT 0602 indexable inserts Torx screw M2.5x7; Torx key T08 Designed for disc milling and slotting operations FAQ Which inserts fit this cutter? The DF160TM is designed for CCMT 0602 indexable inserts; selecting the appropriate grade and geometry will depend on the material and cutting strategy. What arbor size is required? The cutter uses a 32 mm arbor / shank diameter for a secure connection to compatible toolholders. How many cutting edges and what cutting height does it have? This disc cutter features 12 teeth and an 8 mm cutting height for efficient material removal and good chip control. Is the tool suitable for CNC machining? Yes, the DF160TM is suitable for CNC and manual milling environments where indexable insert technology and quick insert changes benefit production flow. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, standardised toolholder that combines secure clamping for CCMT 0602 inserts with a rigid 90° cutting geometry for stable, repeatable machining; order directly via Metav Werkzeuge or consult our advisors for compatibility and fast delivery. Klemmhalter SCACR-F – SCACR 1010 clamping holder for CCMT indexable inserts, right-hand, 90° The Klemmhalter SCACR-F is a 90° clamping holder designed for right-hand operations with CCMT 0602 indexable inserts, suited to confined setups and serial milling or turning tasks. Right-hand 90° cutting angle Compatible with CCMT 0602 inserts SCACR 1010 ISO designation Compact 110 mm overall length Precision clamping for consistent metal removal The compact clamping assembly provides a secure seat for indexable inserts, ensuring consistent chip formation and surface finish across repeated cycles. With a clear focus on process reliability, the right-hand holder and its 90° cutting angle minimise radial forces during face and shoulder operations, which reduces vibration and tool deflection. The standardised ISO designation supports predictable mounting and interchangeability, translating directly into lower rework rates and improved throughput in production runs. Small footprint, high rigidity — less overhang, more stability Engineered for tight tool layouts, the holder’s 110 mm overall length and modest cross-section (height and width 10 mm) reduce overhang and deliver elevated rigidity at the cutting zone. The low mass (0.104 kg) keeps centrifugal effects minimal while enabling quicker tool indexing and handling in automation cells. A compact toolholder like this preserves machine dynamics and helps maintain repeatable tolerances when space is limited or when multiple tools must be clustered on a turret or milling head. Fast insert changes and predictable setup times Designed for CCMT 0602 inserts, the SCACR-F style holder supports rapid insert replacement and consistent seating, which lowers operator time per change and shortens downtime between batches. The ISO SCACR 1010 identification and the bore reference J06-F facilitate correct selection and mounting within existing tooling systems. In process terms, this means fewer setup iterations and a steadier production flow — measurable improvements in efficiency for small and medium series manufacturing. For availability, delivery from Emmerich and application advice on the Technik Cutting Tools SCACR‑F clamping holder, contact Metav Werkzeuge for direct ordering or tailored consultancy. Technical Data SKU: D411TM Model: SCACR-F ISO designation: SCACR 1010 Compatible inserts: CCMT 0602 Facts Overall length: 110 mm Holder height: 10 mm Cutting-head width: 10 mm Holder width: 10 mm Weight: 0.104 kg Cutting angle: 90° Special features Cutting direction: right-hand Bore / shank reference: J06-F For indexable inserts: CCMT 0602 Bezeichnung (English): SCACR-F for CCMT Indexable Inserts FAQ Is this holder suitable for CCMT 0602 inserts? Yes. The Klemmhalter SCACR‑F is designed specifically for CCMT 0602 indexable inserts and provides the correct seat geometry for predictable cutting performance. What is the cutting direction and angle of the holder? The holder is configured for right-hand cutting with a 90° cutting angle, suitable for shoulder and face turning or similar operations. What are the main dimensions and weight? Overall length is 110 mm, height and width are 10 mm, and the unit weight is 0.104 kg. Which ISO designation and bore reference apply to this toolholder? ISO designation SCACR 1010 and bore/shank reference J06-F are specified for the SCACR‑F holder (SKU D411TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the robust combination of replaceable CCMT 0602 inserts, a compact 80 mm diameter and a 27 mm shank for stable mounting — designed to cut set-up time and tooling costs while keeping productivity high. Order the cutter directly via Metav Werkzeuge or ask our consultants for application advice. Indexable Disc Cutter DF152TM by Teknik Makina — 80 mm, CCMT 0602 compatible The Indexable Disc Cutter DF152TM is an indexable disc cutter engineered for efficient slotting and shoulder milling tasks in CNC machining, using CCMT 0602 inserts for economical component production 80 mm diameter for stable slotting 10 mm cutting height for deep cuts Compatible with CCMT 0602 indexable inserts 27 mm shank diameter for secure mounting Boost throughput with indexable inserts and a compact design The replaceable CCMT 0602 inserts provide the main economic benefit: rapid index changes instead of full-tool replacement, which reduces downtime and tooling expenditure. The disc's 80 mm diameter and 10 mm cutting height allow reliable engagement for typical slotting and shoulder operations, while the relatively light overall mass keeps spindle load moderate. This combination supports higher feed rates and continuous production cycles without frequent interruptions, making the tool suitable for batch machining and repetitive operations where tool-change efficiency matters. Quick and secure set-up for dependable machining A 27 mm shank diameter ensures a rigid connection to tool holders, improving stability during cuts. The cutter is secured with M2.5x7 Torx screws (Torx key T08), enabling fast and repeatable insert clamping with standard workshop tools. The construction balances accessibility and rigidity, so flange runout is reduced and insert life is extended. The compact tool weight of 0.289 kg simplifies handling and storage while still delivering the clamping forces needed for consistent cutting performance. Practical use cases and machining advantages Designed primarily for slotting and face-turning-style operations on standard machining centres, the indexable design allows controlled material removal without custom regrinding. With an axial engagement of 16 mm and the specified insert form, the cutter supports efficient chip formation and predictable tool wear, which eases planning of reconditioning intervals and inventory of spare inserts. Process planners benefit from the straightforward geometry and widely available CCMT inserts, which simplify procurement and reduce lead times. Contact Metav Werkzeuge for tailored machining advice and secure supply from Emmerich — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss the DF152TM and compatible tooling solutions Technical data Article number: DF152TM Manufacturer: Teknik Makina Core specifications Diameter: 80 mm Cutting height: 10 mm Axial engagement: 16 mm Shank diameter: 27 mm Weight: 0.289 kg Design features Compatible with CCMT 0602 inserts Torx screw M2.5x7 Torx key T08 Indexable disc cutter design FAQ What inserts are compatible with this cutter? The cutter accepts CCMT 0602 indexable inserts; the DF152TM is designed for straightforward insert replacement to keep downtime minimal. What is the maximum cutting height of the tool? The tool provides a 10 mm cutting height, enabling robust slotting and shoulder cuts in typical CNC operations. Which shank diameter is required for mounting? A 27 mm shank diameter is specified for secure mounting of the DF152TM in standard tool holders. Which screw and key are needed to secure the inserts? Insert clamping is achieved with M2.5x7 Torx screws and a T08 Torx key for reliable and repeatable fixing. For which machining tasks is this cutter best suited? The tool is best suited to slotting and shoulder milling where indexable inserts and quick changeover support efficient batch production using the DF152TM Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of precision finishing (0.02 mm), a rigid 25 mm shank and compatibility with CCMT 0602 inserts delivers consistent bore quality and efficient tool changes; order the boring tool directly via Metav Werkzeuge or ask our consultants if needed Boring Tool for Fine Machining — Precision boring holder, CCMT 0602 compatible, Ø25 mm shank by Teknik Makina The Boring Tool for Fine Machining is a precision holder engineered for finishing operations on machined bores; it is optimised for indexable insert turning and compact workshop integration Precision finish tolerance 0.02 mm Compatible with CCMT 0602 inserts 25 mm shank diameter Cutting diameter up to 32 mm Delivering repeatable precision for finishing operations Engineered for fine finishing, this boring holder is specified for a 0.02 mm finish tolerance, which means that consistent bore geometry is achieved with each pass. The tight tolerance is particularly valuable where surface quality and dimensional consistency determine part acceptance. The toolholder design minimises deflection during light cuts and allows predictable machining results, so finishing cycles can be planned with confidence and inspection intervals reduced. The role of indexable tooling is explained by its ability to restore a fresh cutting edge quickly; the use of standardised inserts supports fast reconditioning of the cutting edge. Rigidity and geometry that reduce vibration and improve surface quality A substantial 25 mm shank and an overall length of 156 mm provide the necessary stiffness for finishing bores while keeping overhang controlled. The combination of shank diameter and effective cutting length (shank cutting length 100 mm) reduces chatter and contributes to superior surface finishes. By limiting elastic deflection, the holder supports finer feed settings and lower cutting forces, which translates into improved roundness and a more uniform lay on the machined surface. For workshop planning, this means predictable cycle times and fewer secondary operations. Insert system that speeds up production and simplifies tool logistics The holder accepts CCMT 0602 indexable inserts, a widely available format that allows rapid blade changes and economical rotation of edges. Indexable inserts make it straightforward to switch grades for different materials and to maintain production flow by stocking a limited number of insert grades rather than complete solid tools. The tool supports cutting diameters of up to Ø32 mm, offering flexibility across a range of finishing applications. Lightweight at 0.57 kg, the holder is easy to handle during setup without compromising stability on the machine. Practical integration into workshop and production environments Designed for use on turret lathes and CNC turning centres, this boring holder is targeted at precision job shops and production departments requiring reliable finishing performance. The compact footprint and standard insert interface make it simple to incorporate into existing tool inventories and tool magazines. Inspection results are made more consistent by the holder’s geometry, helping to reduce rework. For customers seeking supply reliability and technical advice, Metav Werkzeuge provides local stock and expertise to support specification and procurement decisions. Contact Metav Werkzeuge in Emmerich for tailored advice on Teknik Makina finishing tools or to arrange a supply; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data Article number: THKB122TM Manufacturer: Teknik Makina SKU: THKB122TM Facts Fine machining tolerance: 0.02 mm Max cutting diameter: 32 mm Shank diameter: 25 mm Effective cutting length: 100 mm Overall length: 156 mm Weight: 0.57 kg Special features Compatible with CCMT 0602 inserts Designed for fine finishing of bores Indexable-insert holder for fast tool changes FAQ What inserts fit the boring holder? The boring holder accepts CCMT 0602 indexable inserts; this format is compatible with a wide range of grades and geometries for flexible finishing. What accuracy can be expected with this tool? The tool is specified for a 0.02 mm finish tolerance, enabling repeatable bore quality when set up and used under appropriate machining conditions. Which shank size and overall dimensions are provided? The holder features a 25 mm shank diameter and an overall length of 156 mm, with an effective cutting length of 100 mm. What is the maximum cutting diameter for finishing? The holder supports cutting operations up to Ø32 mm, suitable for a variety of finishing bore diameters. Is the Teknik Makina boring tool suitable for automated tool magazines? Yes, the indexable-insert format and compact design allow the Teknik Makina boring tool (SKU THKB122TM) to be integrated into turret and magazine systems where the shank and length match the machine’s toolholders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a rigid 16 mm shaft, a long 152 mm cutting length and compatibility with CCMT 0602 indexable inserts, this boring bar delivers stable internal machining and efficient insert changes; order the TKB098TM directly via Metav Werkzeuge or consult our specialists for application advice. TKB098TM Boring Bar – indexable internal boring tool with 16 mm shaft and 152 mm cutting length (Teknik Makina) The TKB098TM Boring Bar offers a compact, precision-focused solution for internal turning operations, designed as an indexable tool holder compatible with CCMT 0602 inserts for straightforward insert replacement and repeatable results 16 mm shaft for secure clamping 152 mm effective cutting length for deep bores Compatible with CCMT 0602 indexable inserts 200 mm overall length for extended reach Delivering consistent bore accuracy and vibration control The combination of a 16 mm shaft and an extended 152 mm cutting length provides a balance between reach and rigidity that helps maintain concentricity during internal machining. Where stability is essential, the toolholder’s design reduces chatter and supports repeatable diameters across batch runs. Specified tolerances are achieved more reliably when the holder is clamped correctly in a standard toolpost or boring bar adaptor, making the unit suitable for precision-focused turning tasks. The use of indexable inserts reduces setup variability compared with brazed or solid tooling, translating directly into predictable part quality. Faster insert changes and predictable uptime for production Designed for CCMT 0602 indexable inserts, the boring bar reduces maintenance downtime through quick insert indexing and simple replacement without specialised fixtures. The low mass of 0.401 kg contributes to easier handling during tool changes and reduces spindle overhang effects when re‑mounting, while the insert system supports both finishing and light roughing passes depending on the chosen grade. This pragmatic approach to tooling lowers process interruptions and helps sustain machine uptime during medium-length production cycles. Integrates into CNC turning workflows with extended reach With a 200 mm overall length, the tool provides the reach required for many internal machining applications while remaining compatible with common CNC turret and toolpost arrangements. As an indexable boring bar, it fits established workshop processes, allowing straightforward inventory management by pairing the holder with widely available CCMT plates. The design supports operators and planners aiming to harmonise tooling across multiple machines, enabling a consistent approach to tooling procurement and faster tool set-up times on the shop floor. The robust construction supports steady cutting conditions and consistent part outcomes. Discuss machining requirements and procure the Teknik Makina TKB098TM via Metav Werkzeuge for reliable supply from Emmerich; for specification checks or a tailored quote contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TKB098TM Manufacturer: Teknik Makina Description: Boring tool / indexable boring bar Compatible inserts: CCMT 0602 Numbers / Core technical data Shaft diameter: 16 mm Cutting length (cutting part): 152 mm Overall length: 200 mm Weight: 0.401 kg ECLASS: 21181208 Special features For indexable inserts CCMT 0602 Intended for internal boring operations Solid construction for stable machining Compact design for straightforward handling FAQ What insert type does the tool accept? The TKB098TM accepts CCMT 0602 indexable inserts; this standard format allows easy sourcing and fast replacement during production. Which machines is the boring bar suited to? The indexable boring bar is suitable for conventional and CNC turning centres equipped with compatible toolholders; the 200 mm overall length offers extended reach for internal operations. How does the shaft diameter affect performance? The 16 mm shaft provides secure clamping and contributes to reduced vibration, supporting consistent bore accuracy when mounted correctly. Is the tool intended for heavy roughing or finishing? Paired with the appropriate CCMT insert grade, the holder supports finishing and light to moderate roughing; insert selection should match the intended cut and workpiece parameters. How heavy is the tool for handling and set-up? The tool weight is 0.401 kg, which facilitates handling during set-up and reduces tool overhang impact when mounted. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine secure M16 mounting with a flexible Ø 32–40 mm capacity and CCMT 0602 insert compatibility for controlled internal turning and reliable fine finishing to 0.01 mm. Order the turning holder directly via Metav Werkzeuge or request specialist advice from its consultants for application-specific recommendations. Internal Turning Holder THKB104TM – for CCMT 0602 Inserts, Ø 32–40 mm, M16 by Teknik Makina The Internal Turning Holder THKB104TM is a compact, precision tool holder designed for internal turning operations using CCMT 0602 indexable inserts, suited to bore diameters in the 32–40 mm range *Compatible with CCMT 0602 inserts *Covers Ø 32–40 mm bores *Enables fine finishing 0.01 mm *Secured by M16 thread, 74.3 mm length Consistent bore finishes through defined insert compatibility The holder is engineered to work with CCMT 0602 indexable inserts, providing a predictable cutting geometry that helps achieve fine finishing 0.01 mm in internal turning operations. Using a standard insert format simplifies tool management and reduces set-up variability, so cycle-to-cycle surface quality becomes more reproducible. For shops seeking fewer rework passes, the controlled insert geometry delivers measurable improvements in finish and reduces downstream grinding or polishing effort. Secure mounting and a dimensional range for flexible setups A robust M16 thread and an overall length of 74.3 mm ensure the tool holder seats firmly in common internal tool adapters, which reduces chatter and improves dimensional stability. The holder covers a Ø 32–40 mm bore range, allowing one tool to serve multiple bore sizes without frequent replacement. The relatively modest mass of 0.287 kg aids handling during tool changes and contributes to a stable centre of gravity once mounted, supporting repeatable positioning and prolonged tool life under normal operating conditions. Productivity advantages for batch and single-piece production By combining a universal insert format with a compact, rigid holder design, the system reduces the number of tool variants required at the workstation and shortens changeover intervals. The integration of widely available inserts and the holder’s straightforward geometry supports faster reconditioning and less downtime. These attributes translate into reduced cycle time and improved shop-floor throughput, especially where internal turning tasks are frequent and precision tolerances are required. Practical handling, insert changes and technical support Insert mounting and indexing are uncomplicated with the standard clamping interface; replaceable inserts restore cutting performance quickly without the need for full holder exchange. For assembly guidance, selection of the optimal insert grade or cutting data adapted to a specific application, Metav Werkzeuge’s technical advisors can provide tailored recommendations and clarifications on set-up and maintenance. Clear documentation and a focused selection of inserts keep the operational routine efficient and cost-effective. Contact Metav Werkzeuge for tailored tooling recommendations and to confirm that the Internal Turning Holder THKB104TM suits the intended applications and machine interfaces Technical data Article number: THKB104TM Manufacturer: Teknik Makina eCl@ss: 21041590 Compatible inserts: CCMT 0602 Core dimensions and measurable data Weight: 0.287 kg Overall length: 74.3 mm Fine finishing: 0.01 mm Diameter range: Ø 32–40 mm Thread: M16 Special features and compatibility Designed for internal turning applications Uses CCMT 0602 indexable inserts Compact, rigid construction for reduced vibration SKU: THKB104TM FAQ Which insert format is required for the holder? The holder accepts CCMT 0602 indexable inserts, which are specified for the Internal Turning Holder THKB104TM and enable standardised cutting geometry. What bore diameters can be machined with this tool? This turning tool covers a Ø 32–40 mm range as stated in the technical data, enabling a single holder to serve several bore sizes. How is the holder fixed in the turret or adapter? A secure M16 thread is provided for mounting; this thread size ensures stable clamping and reduced vibration during internal turning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise internal boring with a compact, rigid design and compatibility with industry-standard indexable inserts. The 16 mm shank and 150 mm overall length provide stable clamping and reach for small to medium bores, while the tool’s compatibility with CCMT 0602 inserts delivers economical edge changes and consistent cutting performance. Order the TKB096TM directly via Metav Werkzeuge or contact the consultants for tailored advice. Boring tool TKB096TM — internal boring bar, Ø19 mm, for CCMT 0602 The boring tool TKB096TM is engineered for precision internal machining in CNC turning and lathe operations, offering compact reach and compatibility with standard indexable inserts. Compact 150 mm overall length 16 mm shank for rigid clamping Compatible with CCMT 0602 inserts Precise boring with controlled cutting diameter The design focuses on predictable material removal: a defined cutting diameter of up to 23 mm and a nominal body diameter of 19 mm make the tool suitable for finishing and light roughing of internal bores. Using indexable inserts reduces downtime for edge changes and keeps running costs controllable; the insert pocket accepts the common CCMT 0602 geometry, which is widely stocked and simple to replace. These features support repeatable results in series production and small-batch work alike. Rigid clamping for stable machining results A 16 mm shank delivers a compact clamping interface that improves torsional stiffness compared with longer, thinner holders. The reduced overhang and optimised mass distribution lower vibration risk, which helps maintain surface finish and dimensional accuracy. For operations requiring consistent concentricity, the combination of a short effective length and a stout shank contributes directly to improved machining stability. Cutting length and reach balanced for versatility With a cutting length of 102 mm and an overall length of 150 mm, the tool provides sufficient reach for many internal operations without excessive overhang. This balance between reach and rigidity makes the holder suitable for components where access is limited but positional accuracy remains critical. The geometry supports light to moderate depth of cut while preserving tool life through more uniform load distribution. Economical indexable-insert system Compatibility with CCMT 0602 inserts allows the use of a wide range of carbide grades and coatings available on the market, enabling adaptation to different materials and cutting speeds. The indexable system reduces tooling costs by allowing only the insert to be replaced when worn, rather than the entire bar. For workshops seeking predictable maintenance cycles and fast turnaround, this approach minimises inventory complexity and keeps machine downtime low. Application scope and material guidance The holder is intended for internal boring tasks on small to medium-sized parts where accuracy and surface quality are priorities. Typical applications include finishing of bores in alloys and steels where the chosen insert grade and cutting parameters are matched to the workpiece material. The modular insert format supports quick adaptation: a harder grade for high-speed finishing or a tougher grade for interrupted cuts. Practical handling and workshop integration Weighing approximately 0.292 kg, the tool is light enough for easy handling during tool changes yet substantial enough to provide stable cutting conditions once clamped. The compact dimensions simplify storage and tool-holding logistics on the shop floor. Where process planning emphasises repeatability, the holder’s standardised interface with common insert types streamlines set-up and reduces the need for specialised spares. For a reliable internal boring solution from Teknik Makina, request the TKB096TM through Metav Werkzeuge — Metav’s consultants in Emmerich are available to advise on insert grades and clamping options at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: TKB096TM Manufacturer: Teknik Makina Article name: Ausbohrwerkzeug Core data Max cutting diameter: 23 mm Nominal diameter: 19 mm Shank diameter: 16 mm Cutting length: 102 mm Overall length: 150 mm Weight: 0.292 kg Special features Compatible with CCMT 0602 inserts Indexable-insert boring design Compact shank for rigid clamping FAQ What insert type does the tool accept? The TKB096TM accepts CCMT 0602 indexable inserts, a widely used format that allows quick edge changes and access to multiple carbide grades. Which maximum bore diameter can be machined with this holder? The holder supports a maximum cutting diameter of 23 mm, while the nominal body diameter is 19 mm. Is the shank size suitable for standard toolholders? Yes, the 16 mm shank is designed for rigid clamping in standard small-shank toolholders, providing improved stability for internal operations. For which machining tasks is this boring bar best suited? The tool is designed for precision internal boring and finishing on small to medium parts, where dimensional accuracy and surface quality are important. How heavy is the tool and how does that affect handling? At approximately 0.292 kg, the tool is lightweight for manual handling yet offers sufficient mass for stable cutting once clamped in the turret or holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a combination of high material removal and easy maintenance: the DF170TM delivers stable machining with its Ø125 mm diameter and 14 indexable inserts, while the compact 40 mm arbor minimises run-out. Order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. DF170TM Indexable Disc Cutter — Ø125 mm, for CCMT 0602 inserts (Teknik Makina) A DF170TM indexable disc cutter engineered for efficient slotting and side milling in industrial CNC applications. Ø125 mm cutter diameter 14 indexable CCMT 0602 inserts 40 mm arbor / toolholder diameter 8 mm cutting height Maximise throughput with predictable cutting performance The cutter head is designed to provide consistent chip evacuation and steady material removal, making it suitable for medium-duty milling operations. With a Ø125 mm diameter and 14 indexable inserts, the tool distributes cutting forces evenly, which reduces vibration and supports higher feed rates. This results in improved cycle times and a more stable surface finish compared with single-point tooling. The combination of insert count and geometry is intended to balance productivity and tool life, offering a predictable machining window for series production. Fast servicing and cost-efficient tooling changeovers Indexable inserts of the CCMT 0602 format allow economical reconditioning: worn inserts are replaced quickly without removing the body from the spindle. Secured by M2.5x7 Torx screws (Torx key T08), the clamping system is straightforward and repeatable, reducing downtime during tool changes. The modular approach separates consumable costs from the cutter body, which is beneficial for workshops aiming to lower per-part tooling expenses while maintaining consistent component quality. Rigidity and accurate mounting for precise results A precise 40 mm arbor interface provides secure seating in compatible toolholders and minimises run-out for improved concentricity. The cutter’s 8 mm cutting height and axial capacity (ap 32 mm) are matched to the insert size and cutter geometry to deliver stable cutting conditions. The compact mass (approx. 0.512 kg) eases handling during set-up while the robust construction supports repeatable positioning, which is essential for geometric accuracy in serial milling operations. Practical applications and integration into the workshop This disc milling head is suitable for integration into CNC milling centres and production machines that accept a 40 mm arbor. The tool is adapted for indexable CCMT 0602 inserts, which are widely available in different grades to suit varied materials and cutting conditions. As an industrial partner, Metav Werkzeuge provides reliable supply from Emmerich, offering a consistent sourcing route for replacements and spares to keep production running without interruption. For tailored application support and reliable supply from our Emmerich hub, contact Metav Werkzeuge for a specification review and to place an order for the Teknik Makina DF170TM — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: DF170TM Manufacturer: Teknik Makina For indexable inserts: CCMT 0602 Torx screw: M2,5x7 Torx key: T08 Facts Diameter: 125 mm Cutting height: 8 mm Axial depth (ap): 32 mm Arbor / toolholder diameter: 40 mm Number of cutting edges: 14 Weight: 0.512 kg Special features Indexable insert system Compact mass for easy handling Securing with Torx screws Compatible with standard CCMT 0602 inserts FAQ What insert type does the cutter accept? The cutter accepts CCMT 0602 indexable inserts; the DF170TM is configured for this standard insert format for straightforward sourcing and replacement. Which arbor or toolholder size is required? A 40 mm arbor or toolholder interface is required for correct seating and minimal run-out with this disc milling head. How many inserts are used on the cutter? This model is equipped with 14 cutting positions, enabling distributed cutting forces and steady chip formation. What securing hardware is supplied for the inserts? Inserts are fixed with M2.5x7 Torx screws and require a T08 Torx key for tightening and removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of an indexable design, a 12 mm cutting diameter and a sturdy 20 mm shank for consistent reverse-side chamfers and minimal downtime; order the tool directly via Metav Werkzeuge or contact their consultants for application advice. Back Countersink C102TM – Indexable reverse-side countersink, for CCMT inserts, 12 mm cutting diameter The Back Countersink C102TM is an indexable countersinking tool engineered for reliable reverse-side chamfering in turning and milling operations, designed to accept standard CCMT carbide inserts for efficient edge formation Indexable design for CCMT 060204 inserts 12 mm cutting diameter for precision chamfers 20 mm shank diameter for standard toolholders 117 mm overall length, weighs 0.21 kg Consistent, accurate chamfers with indexable cutting technology The indexable construction ensures repeatable results: an indexable seat accepts the widely available CCMT 060204 insert, giving a predictable chamfer profile with each change. A single effective cutting edge produces a controlled chip flow that simplifies chip evacuation and reduces the risk of edge damage. The 12 mm cutting diameter is targeted at common chamfering tasks, providing a balance between precision and material removal for reverse-side finishing on turned or milled components. Fast insert changes and low-maintenance operation Maintenance is straightforward: the insert is secured with a Torx screw to the pocket, allowing rapid replacement and consistent seating. The Torx fastening uses M2.5x5.5 hardware and a T8 key for positive engagement and minimal slippage during service. Because insert swaps are quick, the tool reduces machine downtime and supports higher net productivity while keeping tooling inventory manageable with standard CCMT inserts. Stable clamping and compatibility with standard holders A 20 mm shank delivers a rigid connection to common toolholders while the 117 mm overall length offers reach without excessive cantilever. The heavy-duty shank-diameter pairing stabilises the cutting edge during reverse-side operations, which helps to maintain surface finish and dimensional conformity. Compatibility with standard toolholders removes the need for specialised adaptors and streamlines set-up across multiple machines. Proven supply reliability from a specialist partner Select tooling from a trusted supplier to avoid production interruptions: Metav combines a broad product range with central distribution from Emmerich, supporting workshops with expert advice and dependable logistics. The practical result is a straightforward sourcing route for precision tooling, backed by an experienced partner that has supplied thousands of customers across industry and trade. For straightforward ordering or to discuss suitability for specific applications, contact Metav Werkzeuge — Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich; info@metav-werkzeuge.com; +49 2822 7131930 — for personalised advice and supply of the indexable Back Countersink C102TM Technical data Article number: C102TM Manufacturer: Teknik Makina Facts Cutting diameter max: 20 mm Nominal diameter: 12 mm Shank diameter: 20 mm Overall length: 117 mm Weight: 0.21 kg Cutting edges: 1 Torx screw: M2.5x5.5 Torx key: T8 Special features For indexable inserts: CCMT 060204 Indexable reverse-side countersinking tool Single cutting edge design Standard shank format for common toolholders FAQ Which insert type does this countersink use? The Back Countersink C102TM uses CCMT 060204 indexable inserts for predictable chamfers and easy replacement. How is the insert secured in the tool? An M2.5x5.5 Torx screw secures the insert; the appropriate driver size is T8, ensuring firm seating and straightforward maintenance on the C102TM. What shank size is required to hold the tool? The tool features a 20 mm shank, compatible with standard holders that accept 20 mm tooling shanks. What is the overall reach of the tool? Overall length for the C102TM is 117 mm, offering sufficient reach for many reverse-side countersinking applications. How many cutting edges does the tool have? The tool incorporates 1 cutting edge per insert pocket, producing controlled chip formation for chamfering tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of sturdy indexable-insert compatibility, a large Ø80 mm cutter diameter and a robust 32 mm shaft for reliable T-slot production; order the tool directly via Metav Werkzeuge or ask our consultants if needed. T-slot cutter TKC122TM — Ø80 mm, for CCMT 0602 inserts (Teknik Makina) The T-slot cutter TKC122TM is a purpose-built milling tool for precise production of T-slots in machining centres and milling machines, offering stable engagement and quick insert changes. Ø80 mm cutter diameter for robust material removal Compatible with CCMT 0602 indexable inserts 32 mm shaft diameter with 32 mm cutting length Ten cutting edges for smooth chip evacuation Increased throughput through optimised geometry The cutter's large Ø80 mm diameter and multiple cutting edges deliver a higher material removal rate while preserving component integrity. Fitted for CCMT 0602 indexable inserts, the tool is configured for quick insert replacement and consistent performance on repeated runs. The multi-edge layout reduces individual insert load, which in turn lowers thermal stress and prolongs service intervals. For production environments seeking steady cycle times, the combination of diameter and insert system supports improved efficiency without complex set-up changes. Rigidity and vibration control for improved surface quality A robust 32 mm shaft and an overall length of 120 mm provide the mechanical stiffness required for demanding milling operations. The shaft dimensions are matched to the cutter body so that radial runout is minimised and chatter is suppressed; as a result, surface finishes and slot tolerances are maintained across batch production. The tool mass of 1.025 kg contributes to stable cutting dynamics, and the defined 9 mm cutting height keeps engagement predictable for precise slot profiles. Fast maintenance with standardised fastening The indexable-insert concept allows worn edges to be renewed in moments rather than replacing the entire cutter. Inserts are secured with M2.5x5.5 Torx screws and a T8 key, enabling rapid, repeatable clamping during tool service. This arrangement supports lean workshop routines: insert changes and inspections are carried out quickly, downtime is reduced, and tool life is maximised by restoring cutting geometry rather than discarding components. Application-focused design for reliable T-slot machining Engineered specifically for T-slot creation, the cutter's profile and ten cutting edges are intended to produce uniform slot flanks and clear chip channels. The use of indexable inserts ensures that cutting edges can be rotated or replaced to maintain cutting performance, making the tool suitable for repeated, high-volume operations where consistent slot geometry is required. The tool is supplied ready for mounting and intended for use in standard milling spindles that accept a 32 mm shaft. For reliable T-slot production with Teknik Makina’s TKC122TM, contact Metav Werkzeuge in Emmerich for technical advice and direct supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TKC122TM Manufacturer: Teknik Makina Product name: T-slot cutter Key measurements Diameter: 80 mm Cutting edges: 10 Overall length: 120 mm Shaft diameter: 32 mm Shaft cutting diameter: 31.5 mm Cutting length (shaft): 32 mm Cutting height: 9 mm Weight: 1.025 kg Features For indexable inserts: CCMT 0602 Torx screw: M2.5x5.5 Torx key: T8 SKU: TKC122TM FAQ What inserts are compatible with this cutter? The cutter is designed for CCMT 0602 indexable inserts; the TKC122TM accepts these inserts for straightforward edge replacement. How is the insert secured in the cutter? Inserts are fixed with M2.5x5.5 Torx screws using a T8 key, allowing quick and repeatable clamping during maintenance. What are the key dimensions that affect machine setup? Relevant dimensions include the Ø80 mm cutter diameter, 32 mm shaft diameter and overall length of 120 mm; these determine spindle compatibility and overhang. How many cutting edges does the tool have and what is the benefit? The tool has ten cutting edges, which distributes cutting forces and aids smooth chip evacuation for stable cutting performance. Is the cutter suitable for series production? Yes — the indexable-insert design and robust shaft geometry of the TKC122TM support repeated production runs with minimal downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise, repeatable finishing and robust clamping to reduce rework and secure consistent bore quality; the combination of a 25 mm shank, Ø40 mm max cutting diameter and compatibility with CCMT 0602 inserts supports efficient production. Order or discuss delivery options via Metav Werkzeuge for prompt supply and expert advice. Fine boring tool for fine finishing – Teknik Makina Fine boring tool for fine finishing designed for internal finishing applications and compatible with standard CCMT 0602 indexable inserts Fine finishing to 0.01 mm tolerance Compatible with CCMT 0602 inserts 25 mm shank for stable clamping Ø40 mm max cutting diameter Consistent fine finishes with measurable precision The boring bar is engineered to deliver high-precision internal finishes, enabling achievable tolerances down to 0.01 mm for demanding components. Its geometry and recommended insert grade are optimised for minimal vibration and uniform material removal, which reduces the need for secondary operations. By pairing the holder with CCMT 0602 indexable inserts, machinists obtain a reliable combination for repeatable bore quality in series production and prototype runs alike. Stable set-up for higher metal-removal efficiency A 25 mm shank and a substantial effective length provide the rigidity required for stable clamping and improved tool life. The tool’s dimensions—60 mm cutting length on the shank and an overall length of 116 mm—support secure seating in standard toolholders while allowing access into deeper bores. This stability permits slightly higher cutting parameters where the workpiece and machine permit, helping to increase throughput without compromising surface integrity. Flexible integration and practical workshop benefits Compatibility with commonly available indexable inserts simplifies stocking and tool change routines; the use of CCMT 0602 inserts ensures an economical, proven cutting edge for finishing operations. With a maximum cutting diameter of 40 mm and a tool weight around 0.51 kg, the holder balances manoeuvrability and mass for controlled cutting dynamics. For shops aiming to streamline tooling logistics, the tool integrates well with existing setups and supports predictable cycle times and quality outcomes. Contact Metav Werkzeuge today to review specifications, check availability or request a tailored delivery from our Emmerich stock Technical data SKU: THKB126TM Manufacturer: Teknik Makina Facts Max cutting diameter: 40 mm Shank diameter: 25 mm Cutting shank length: 60 mm Overall length: 116 mm Fine finishing capability: 0.01 mm Weight: 0.51 kg Special features Compatible inserts: CCMT 0602 Designed for internal fine finishing Balanced design for reduced vibration FAQ What tolerance can be achieved with this boring bar? The boring bar supports fine finishing down to 0.01 mm, enabling consistent internal surface quality suitable for precision components. Which insert type is required for the holder? The holder accepts CCMT 0602 indexable inserts; this common size facilitates economical tool changes and simple procurement. Is the tool suitable for deeper bores? With an overall length of 116 mm and a 60 mm effective cutting shank, the tool is intended for moderate-depth internal finishing where rigidity can be maintained. What is the article SKU and the supplying brand? The article is listed as THKB126TM and is supplied by Teknik Makina; the design focuses on fine internal finishing and compatibility with standard workshop inserts. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of high material removal capacity and secure mounting for predictable milling cycles; the use of indexable CCMT 0602 inserts keeps operating costs manageable while reducing downtime. Order the cutter directly via Metav Werkzeuge or consult the technical team for specification matching. Disc cutter DF196TM — indexable disc cutter, Ø 200 mm (Teknik Makina) The Disc cutter DF196TM is an indexable milling tool engineered for high-efficiency face and peripheral milling on CNC machines, tailored for use with standard CCMT 0602 inserts. Ø 200 mm cutting diameter Compatible with CCMT 0602 inserts 18 cutting edges for stable removal 40 mm bore for secure mounting Higher removal rates with consistent stability The DF196TM is designed to combine a large cutting diameter with multiple cutting edges to maintain a steady chip load and reduced vibration during heavy passes. Thanks to the Ø 200 mm diameter and 18 cutting edges, the cutter distributes cutting forces across more teeth, which lowers peak loads on individual inserts and extends tool life. This configuration permits reliable material removal in interrupted and continuous milling operations, making the tool suitable for job shops and production lines where long tool life and consistent surface quality are required. The construction supports predictable results even under higher axial engagement. Secure mounting and fast insert changes for uptime A precision 40 mm bore provides a concentric, robust interface for face holders and arbors, improving runout and repeatability. The cutter accepts CCMT 0602 indexable inserts, which are widely available and simple to replace; M2.5x7 Torx screws secure the inserts, with a T08 key used for rapid, repeatable clamping. The cutting height 10 mm and an axial capacity of 70 mm allow substantial depth engagements per pass when the machining strategy requires it, while the insert geometry keeps heat and chip formation under control. These features reduce downtime for maintenance and make consumable management straightforward. Predictable performance and economical operation Weighing 2.035 kg, the cutter balances rigidity and handling convenience for tool setup and changeover procedures. Use of standard CCMT 0602 carbide inserts lowers stocking complexity and supports cost-effective re-indexing when edges are renewed. The indexable design converts tooling investment into multiple cutting edges per insert, improving cost per cutting edge compared with solid-carbide alternatives. For operations focused on process reliability, the tool’s combination of geometry and standardised fastening components yields measurable efficiency gains over time, while supporting consistent surface finish and dimensional control. For robust, high-throughput milling choose the Teknik Makina DF196TM and contact Metav Werkzeuge for tailored supply and application advice: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: DF196TM Manufacturer: Teknik Makina Designation: Disc cutter Facts Diameter: 200 mm Cutting edges: 18 Axial depth (ap): 70 mm Cutting height: 10 mm Bore / shank diameter: 40 mm Weight: 2.035 kg Special features Compatible inserts: CCMT 0602 Torx screw: M2.5x7 Torx key: T08 Indexable insert system FAQ What insert type is required for this cutter? The DF196TM uses CCMT 0602 indexable inserts; this insert type is widely available and offers four usable cutting edges per plate. What arbor or holder fits the cutter? A holder or arbor with a 40 mm bore is required to mount the disc cutter securely for concentric operation. What is the maximum axial engagement for the tool? The cutter is specified with an axial depth (ap) of 70 mm, allowing substantial depth per pass depending on machine capability and process parameters. How many cutting edges does the cutter provide? The tool body accepts 18 cutting edges, which improves chip distribution and reduces load per edge for steadier cutting. Is the fastening hardware standardised? Yes; inserts are retained by M2.5x7 Torx screws and can be tightened using a T08 Torx key for consistent clamping torque. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of robust indexable inserts, proven mounting security and reduced downtime for continuous production performance; order the disc cutter directly via Metav Werkzeuge or ask Metav consultants for application support. Disc cutter DF150TM — indexable disc cutter, Ø 80 mm, CCMT 0602 compatible (Teknik Makina) The Disc cutter DF150TM is an indexable milling tool designed for medium-to-heavy duty slotting and peripheral milling with CCMT 0602 inserts, suited to workshop and industrial toolrooms Indexable disc cutter Ø 80 mm Compatible with CCMT 0602 inserts 10 cutting edges for efficient material removal 27 mm arbor bore, secure M2.5x7 Torx fixing Increase material removal while maintaining component quality The DF150TM delivers consistent cutting performance thanks to its Ø 80 mm diameter and 10 cutting edges, which together allow higher material removal rates with stable chip formation. The cutter’s 16 mm axial depth capability gives a practical balance between productivity and machine load; in practice this means fewer passes to achieve the required section, shortening cycle times and improving throughput. The combination of several indexed edges and a compact tool body helps maintain a uniform surface finish across repeats while keeping vibration to a minimum. Secure mounting and rapid serviceability for reduced downtime A reliable interface is essential in production. The tool’s 27 mm arbor bore ensures accurate seat on a matching arbor and contributes to concentric running. Inserts are retained with Torx M2.5x7 screws, tightened with a T08 key, enabling quick and repeatable insert changes and a secure clamping force. The specified 8 mm cutting height improves rigidity at the cutting zone, reducing tendency to chatter and lowering risk of premature insert wear. These features combine to simplify maintenance routines and shorten stoppage times during routine servicing. Indexable inserts: predictable costs and simple logistics Using standard CCMT 0602 indexable inserts allows cost-effective running: each insert provides multiple renewal faces, so toolholders remain in service longer and stocking requirements are minimised. Indexable systems separate cutting edge wear from the cutter body, which lowers consumable spend and simplifies logistics for procurement. For operations less familiar with insert systems: indexable inserts are small, replaceable carbide pieces that are clamped into the cutter head; when an edge wears, the insert is indexed or replaced without the need to change the complete cutter body. A trusted supply chain and practical support from Metav Sourcing through Metav Werkzeuge brings the advantage of a centralised precision supply and experienced application advice. Metav’s European distribution hub functions as a quality filter for workshop tools, backed by decades of experience and a broad stock range. For procurement managers and workshop supervisors this means reliable availability, straightforward ordering and the reassurance of tested product performance in everyday production environments. For tailored application advice or to place an order for the Teknik Makina DF150TM indexable disc cutter via Metav Werkzeuge, please contact Metav’s technical sales team by e‑mail or phone for precise integration guidance and delivery options. Technical data Article number: DF150TM Manufacturer: Teknik Makina Product name: Disc cutter DF150TM Data Diameter: 80 mm Cutting edges: 10 Axial depth (ap): 16 mm Cutting height: 8 mm Arbor bore: 27 mm Insert type: CCMT 0602 Fixing screw: M2.5x7 (Torx) Torx key: T08 Weight: 0.236 kg SKU: DF150TM eClass: 21180704 ETIM: EC011860 Special features Indexable insert system Rapid insert replacement Secure Torx clamping Balanced geometry for reduced vibration Suitable for workshop and industrial milling FAQ Which inserts fit this cutter? The cutter accepts CCMT 0602 indexable inserts; the DF150TM is designed around this insert format for stable cutting and simple replacement. What arbor diameter is required for mounting? Mounting requires a 27 mm arbor bore; the 27 mm arbor bore provides a concentric fit for precise running. How many cutting edges are available per tool? The tool has 10 cutting edges on the cutter body, enabling effective material removal and extended on‑tool life. What is the recommended axial depth for cutting? The specified axial depth for the tool is 16 mm, offering a compromise between removal rate and machine load for many shop applications. Which fixing hardware is supplied or required? Inserts are fastened with M2.5x7 Torx screws and the key size for servicing is T08 as noted for the DF150TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact cartridge engineered for precise internal boring across a 14–24 mm range, compatible with CCMT 0602 indexable inserts and secured via a Torx T8 system; order the Cartridge 14–24mm for Boring Tool (THB04TM) directly via Metav Werkzeuge or ask our consultants if needed Cartridge 14–24mm for Boring Tool (THB04TM) — Boring tool cartridge by Teknik Makina A Cartridge 14–24mm for Boring Tool created for accurate internal boring in production and workshop environments, designed to take CCMT 0602 indexable inserts Cartridge 14–24 mm range Compatible with CCMT 0602 inserts Torx T8 retention system Secured with M2.5×4.7 Torx screw Consistent bore quality with indexable inserts The cartridge is built to ensure repeatable accuracy when machining internal diameters between 14–24 mm. By accepting CCMT 0602 indexable inserts, the module enables straightforward replacement of cutting edges without altering the holder alignment, which reduces downtime and maintains consistent bore geometry. For customers less familiar with insert codes: CCMT 0602 denotes a square insert with a 0.6 mm nose radius suitable for fine finishing and light roughing, offering a balance between edge strength and surface finish. Secure retention for fast, reliable tool changes Retention is handled with a Torx T8 key and a Torx screw sized M2.5×4.7, delivering a secure clamping method that resists loosening under cutting forces. This arrangement shortens set‑up time and keeps insert seating precise—important where cycle times are tight and part tolerances are critical. The compact fastener geometry also supports confident torque application, helping to avoid over‑ or under‑tightening and preserving tool life and component quality. Practical benefits for workshops and production lines As a component of a dedicated boring tool set, this cartridge streamlines tool management and cutting strategy. The combination of a clearly defined diameter range and standard insert compatibility reduces the need for specialised tooling stocks and simplifies inventory. Used in small series production or maintenance operations, it supports efficient changeovers and consistent results, contributing to overall productivity and fewer scrapped parts. For additional technical data or to confirm fitment in specific toolholders, further specifications can be provided on request via the contact details below. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina Cartridge 14–24mm for Boring Tool (THB04TM) into existing tooling systems or to request detailed drawings and availability Technical data Article number: THB04TM E-class: 21041590 Manufacturer: Teknik Makina Name: Cartridge 14–24mm for Boring Tool Facts Diameter range: 14–24 mm Torx key: T8 Torx screw: M2.5×4.7 Compatible inserts: CCMT 0602 Special features For boring tool sets Accepts CCMT 0602 indexable inserts Retention via Torx T8 and M2.5×4.7 screw FAQ What insert type does this cartridge accept? The cartridge is designed for CCMT 0602 indexable inserts, enabling easy edge replacement without altering holder set‑up. Which diameter range does the cartridge cover? The cartridge covers a 14–24 mm internal bore range suitable for small to medium internal turning tasks. How is the insert secured in the cartridge? Insert retention is achieved with a Torx T8 key and an M2.5×4.7 Torx screw to ensure stable clamping during operation. Is this cartridge compatible with standard boring tool holders? This cartridge is intended for use within compatible boring tool sets; confirm holder dimensions against the Cartridge 14–24mm for Boring Tool (THB04TM) specifications for fitment. Can the cartridge be used for finishing operations? Yes — when equipped with the appropriate CCMT 0602 insert geometry, the cartridge supports finishing passes that demand good surface quality and dimensional control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of stable mounting, straightforward indexable insert replacement and a compact overall length for reliable rear-facing countersinking — order directly via Metav Werkzeuge or consult our technical advisors for application guidance. Back countersink C104TM by Teknik Makina — 20 mm shank, compatible with CCMT 060204 inserts The Back countersink C104TM is an indexable tool designed for rear-facing countersinking and light back-boring tasks on turning centres and lathes Compatible with CCMT 060204 inserts 20 mm shank diameter 26 mm max cutting diameter Torx M2,5x5,5 clamping screw Secure mounting for repeatable rear countersinking The body is engineered to provide a stable tool position during back-facing operations, with a 20 mm shank and a 132 mm overall length that balance reach and stiffness. The single cutting edge construction with 1 cutting edge promotes predictable chip evacuation and a controlled surface finish, which is particularly useful when reversing onto a workpiece shoulder. The modest mass of the tool contributes to less vibration during machining, resulting in improved concentricity and consistent process control. Fast insert changes and reliable clamping The tool accepts indexable inserts CCMT 060204, allowing quick replacement without complex regrinding. The insert is secured with a Torx M2,5x5,5 clamping screw and requires a T8 key for tightening, simplifying maintenance routines and reducing downtime. Indexable systems like this separate the cutting geometry from the body, which lowers per-cutting-edge cost and speeds up setup when different edge geometries are needed for varying materials. Precise cutting range for typical turning tasks With a 26 mm cutting diameter as the specified maximum and a nominal 17 mm diameter body dimension, the tool covers a practical range for rear countersinks and small back-boring operations. The defined cutting diameter helps in process planning and toolpath programming, enabling efficient cycle-time estimates and predictable material removal. The straightforward geometry reduces the need for complex coolant strategies while maintaining a reliable surface quality. Predictable performance and workshop benefits Weighing 0.261 kg, the tool offers an easy balance between rigidity and manoeuvrability, which is advantageous for shops seeking repeatable results without excessive tool mass. The indexable system minimises inventory complexity by allowing a single holder to serve multiple insert types for varied operations. Supplied as a compact tool body, it supports a streamlined tooling setup and contributes to consistent part tolerances across production runs. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools Back countersink C104TM into existing workflows or to arrange a supply from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: C104TM Manufacturer: Teknik Makina ECLASS: 21180208 Core measurements Shank diameter: 20 mm Overall length: 132 mm Max cutting diameter: 26 mm Nominal diameter: 17 mm Cutting edges: 1 Weight: 0.261 kg Design & compatibility Indexable inserts: CCMT 060204 Clamping screw: Torx M2,5x5,5 Torx key size: T8 Application: back countersinking / rear-facing operations FAQ Which inserts fit the tool? The tool accepts CCMT 060204 indexable inserts; this insert type is specified for the Back countersink C104TM and allows rapid replacement. What size shank does the body have? The holder is supplied with a 20 mm shank, suitable for toolposts and adaptors that accept 20 mm tool shanks. What is the maximum cutting diameter? The maximum cutting diameter is 26 mm, which defines the upper limit for countersinking and small back-boring tasks with this holder. Which screw and key are used for clamping the insert? Insert clamping is performed with a Torx M2,5x5,5 screw and requires a T8 key for tightening and removal. Is the tool suitable for CNC turning centres? Yes, the design of the holder and its indexable insert system make it appropriate for use on lathes and CNC turning centres in rear-facing countersinking applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust indexable‑insert design with 160 mm diameter and 16 cutting edges to maintain cycle times and reduce downtime; combine this with a rigid 40 mm mounting and 50 mm ap for stable heavy engagement — order the disc milling cutter directly via Metav Werkzeuge or consult our specialists for application advice. Disc milling cutter DF184TM — 160 mm, 16 cutting edges, Teknik Makina The Disc milling cutter DF184TM is a high‑performance side cutter designed for medium to heavy machining, accepting CCMT 0602 indexable inserts for economical resurfacing and slotting operations. 160 mm diameter for high material removal 16 indexable cutting edges for even load distribution 40 mm mounting for rigid clamping Compatible with CCMT 0602 inserts for economy Consistent productivity through high engagement and stable cutting With a large 160 mm cutter body and 16 cutting edges, this tool is engineered to sustain high material removal rates while keeping individual insert loads low. The combination of many edges and a substantial cutter diameter supports longer tool life and fewer insert changes, which increases machine uptime and lowers per‑part machining cost. The specified 50 mm radial engagement (ap) enables more aggressive passes where the machine and workpiece setup permit, translating into shorter cycle times and improved throughput. Secure clamping and simple insert change for reliable operation A 40 mm mounting diameter gives the cutter excellent rigidity in the arbor, reducing vibration and improving surface finish consistency. Insert retention uses M2.5x7 Torx screws matched to a T08 key, allowing straightforward and repeatable clamp torque during maintenance. The modest cutter weight of 1.228 kg balances handling convenience with the mass needed for cutting stability; clear torque and screw size specifications simplify workshop procedures for insert replacement and reassembly. Optimised cutting geometry for orderly chip formation Accepting CCMT 0602 inserts, the cutter’s geometry supports efficient chip formation and evacuation across multiple cuts. A cutting height of 10 mm ensures sufficient material engagement for common faces and slots without compromising insert clamping. The distributed cutting pattern helps to avoid concentrated thermal loads on individual inserts, which benefits dimensional stability on long batches and helps maintain consistent component tolerances during extended runs. Practical advantages for everyday workshop use Designed for compatibility with standard indexable inserts, the disc milling cutter reduces inventory complexity and supports cost‑effective tool management. The clear, documented specifications — including screw type, key size, mounting diameter and cutting height — allow quick integration into existing tool systems. For technical queries or confirmation of suitability for a specific machining task, Metav Werkzeuge provides application guidance and can supply matching inserts and accessories. Contact Metav Werkzeuge for tailored cutting solutions with the DF184TM — discuss suitable insert grades, clamping setups or batch strategies directly with Metav Werkzeuge; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: DF184TM Manufacturer: Teknik Makina Numbers / Core technical data Diameter: 160 mm Cutting edges: 16 Mounting diameter: 40 mm Cutting height: 10 mm Depth of cut (ap): 50 mm Weight: 1.228 kg Special features / Design For indexable inserts: CCMT 0602 Torx screw: M2.5x7 Torx key: T08 Disc milling cutter design for side/face operations FAQ What insert type does this cutter use? The DF184TM is designed for CCMT 0602 indexable inserts, enabling economical replacement and broad material coverage with the appropriate insert grade. What is the maximum radial engagement recommended? A radial engagement of 50 mm (ap) is specified for the cutter and allows high material removal when machine power and fixturing are adequate. Which mounting diameter is required for secure clamping? The cutter requires a 40 mm mounting bore to ensure rigid clamping and minimise vibration during machining. How are the inserts secured and which tool is required? Inserts are fastened with M2.5x7 Torx screws using a T08 key for repeatable clamp torque and simple maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com