Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
8.54mm Gauge Pin, ±0.001mm, Length 50mm, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, a compact 8.54 mm diameter and sturdy special steel construction for reliable dimension checks and fixture setting; order directly via Metav Werkzeuge or request advice from our consultants. Gauge pin M323.854 – single 8.54 mm inspection pin, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The gauge pin M323.854 is a precision inspection pin designed for exact end-measurements and dimensional verification in workshop and quality‑control environments Precision tolerance ±0.001 mm Diameter 8.54 mm exact fit Length 50 mm workshop version Special steel construction Precision where micrometres matter A tolerance of ±0.001 mm (1 µm) positions this inspection pin in the realm of high‑precision gauging. Such fineness reduces measurement uncertainty when setting up fixtures, checking bore sizes or verifying finished parts; the tight tolerance ensures repeatable reference points and minimises the need for corrective rework. The compact 8.54 mm diameter gives a defined contact area for accurate end‑measurement while the short profile supports stability during insertion and gauging. Robust build for everyday workshop use Constructed from special steel, this workshop‑grade inspection pin is engineered for regular handling and repeated seating in gauges and fixtures. The material choice balances hardness with wear resistance, so the pin maintains its measuring surface over time and use. The single‑piece format provides a stable, vibration‑resistant reference, supporting consistent dimensional checks across production batches and reducing downtime from frequent replacements. Practical applications and efficiency gains Designed for direct measurement tasks, the pin serves as a reference gauge for bore verification, alignment checks and component end‑measurement. Using a dedicated inspection pin simplifies setup procedures and accelerates inspection cycles, delivering measurable productivity benefits: faster checks, fewer stoppages and clearer go/no‑go decision points. The combination of compact form and tight tolerance helps integrate the pin into manual gauging rigs as well as semi‑automated inspection stations. Purchase clarity and supply reliability Product identification and traceability are straightforward: the item is listed under M323.854 with GTIN reference, enabling inventory control and procurement workflows. Sourcing from Metav IndustryLine links this component to a European distribution hub with established stock and dispatch routines, offering continuity for production environments that rely on predictable replenishment and consistent quality. Contact Metav Werkzeuge for expert guidance on the Metav IndustryLine M323.854 and arrange a supply tailored to workshop needs from our Emmerich distribution centre Technical data Article number: M323.854 GTIN: 4061905061752 Brand: Metav IndustryLine Product type: Gauge pin, single Facts Diameter: 8.54 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Special features Material: Special steel Workshop version Single piece construction FAQ What is the exact tolerance of this inspection pin? The inspection pin M323.854 has a tolerance of ±0.001 mm, suitable for high‑precision end‑measurements. For which applications is this pin recommended? This gauge pin is recommended for bore verification, fixture alignment and dimensional checks in workshop and quality‑control tasks. Which material is used for the pin? The pin is made from special steel, chosen for wear resistance and stability under repeated use. Is the item traceable for procurement systems? Yes, the item is listed as M323.854 and carries GTIN 4061905061752 to aid stock control and ordering. Can this pin be used in automated inspection cells? The compact diameter and tight tolerance make the pin suitable as a reference element in semi‑automated inspection setups, where precise contact geometry is required. Who supplies this product and where is it shipped from? The product is part of the Metav IndustryLine range and is supplied via Metav Werkzeuge GmbH from Emmerich. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.55mm Test Pin ±0.001mm Length 50mm, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability, fine tolerance and compact handling for fast in‑line checks; the 8.55 mm diameter and ±0.001 mm tolerance ensure reliable end‑dimension verification while the 50 mm length keeps operation simple and repeatable. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for application guidance. Gauge pin M323.855 — single, 8.55 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The gauge pin M323.855 is a single precision plug gauge designed for end‑dimension verification and routine inspection tasks in workshop and production environments. Workshop version for robust daily use Diameter 8.55 mm with ±0.001 mm accuracy Compact 50 mm length for easy handling Special steel construction for wear resistance Precise end‑dimension verification for production control The short, hardened pin with an exact 8.55 mm nominal diameter and a fine ±0.001 mm tolerance is intended for fast verification of end dimensions and go/no‑go checks. Used as a reference pin at inspection benches or on jigs, the component delivers consistent repeatability even when several checks are required per cycle. The 50 mm active length balances contact stability and accessibility, reducing measurement scatter compared with very short pins while remaining easy to position. This precision level supports quality control processes where micrometre‑level certainty is demanded without resorting to specialised laboratory gauges. Robust handling and reduced inspection time on the shop floor Constructed from special steel, the part is finished to resist abrasion and maintain geometric integrity under routine use. Its workshop version designation indicates practical tolerances for industrial environments and ensures durability when used in fixtures or manual inspection stations. At approximately 0.027 kg, the component is light enough for frequent handling yet substantial enough to avoid accidental displacement during use. The hardened surface improves wear resistance, which reduces the need for frequent replacement and supports consistent throughput in production testing—resulting in measurable time savings during batch inspections. Traceable identification and integration into inventory The pin is provided under SKU M323.855 and carries a GTIN for straightforward inventory control and traceability in quality management systems. As a standardised gauge pin, it integrates easily into existing inspection routines and documentation, supporting audit trails and part history. For complex applications or integration into automated inspection setups, further technical data can be supplied on request to ensure compatibility with fixtures and measurement workflows. The combination of precise tolerance, compact dimensions and industrial finish makes this plug gauge a pragmatic tool for maintaining dimensional conformity across serial production. Contact Metav Werkzeuge for application advice or request a delivery of the Metav IndustryLine gauge pin M323.855 directly from our Emmerich facility. Technical data Article number: M323.855 GTIN: 4061905061769 ECLASS: 21170231 Weight: 0.027 kg Material: Special steel Core specifications Diameter: 8.55 mm Length: 50 mm Tolerance: ±0.001 mm Features Workshop version Single gauge pin for end‑dimension checks Category: Gauge pins (Messstifte) SKU for stock management: M323.855 FAQ What accuracy can be expected from this gauge pin? The gauge pin M323.855 (Metav IndustryLine) is specified with a ±0.001 mm tolerance, suitable for fine inspection tasks and repeat checks on the shop floor. What material is used for the gauge pin? This Metav IndustryLine plug gauge is made from special steel, chosen for wear resistance and stable geometry under routine use. How long is the pin and what diameter does it have? The pin measures 50 mm in length with a nominal diameter of 8.55 mm, dimensions that support secure seating and reliable end‑dimension verification. Can this pin be used in production fixtures and jigs? Yes; the workshop specification and robust finish make the pin appropriate for use in fixtures, manual gauges and many production inspection routines. How is the part identified for inventory and traceability? The item is listed under SKU M323.855 and GTIN 4061905061769, enabling straightforward integration into inventory and quality documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.56mm Gauge Pin ±0.001mm Length 50mm Workshop Version Special Steel - Metav IndustryLine
Benefit from a compact, workshop-grade measuring solution that combines ±0.001 mm dimensional control, special steel durability and a 50 mm working length for reliable end‑measurements. Order the item directly via Metav Werkzeuge or request tailored application advice from our specialists to ensure seamless integration into inspection routines. M323.856 Gauge Pin — 8.56 mm, ±0.001 mm (Metav IndustryLine) M323.856 is a precision gauge pin designed for verification of bore end dimensions and go/no‑go checks in workshop environments 8.56 mm nominal diameter with ±0.001 mm tolerance 50 mm hardened special-steel shank Workshop-grade finish for robust handling Traceable SKU M323.856 and GTIN 4061905061776 Repeatable results for critical bore checks The core advantage of this precision tool is reproducible dimensional control: the ±0.001 mm tolerance delivers a level of accuracy comparable to high‑precision inspection aids, reducing uncertainty in acceptance testing. With a fine tolerance band, measurement variance is minimised and process decisions—accept, rework or scrap—can be made with confidence. Applied to end‑measurements and verification tasks, the pin supports fast dimensional checks that prevent downstream assembly errors and machining rejects, improving overall production efficiency and lowering scrap rates. Robust workshop design for everyday use Constructed from special steel and finished for workshop handling, the pin combines corrosion resistance with surface integrity to withstand routine use. The 50 mm length balances reach and rigidity, ensuring the pin remains stable during insertion and withdrawal; the compact mass (approx. 0.027 kg) minimises bending and handling fatigue. This construction reduces the risk of deformation under normal inspection forces and preserves long‑term repeatability, so set‑up times are shortened and inspection throughput increases without compromise to measurement quality. Traceability and workflow compatibility Designed as a single measurement element within a structured inspection routine, the gauge pin supports traceable inventory and process documentation. The article is listed under SKU M323.856 and GTIN 4061905061776, enabling straightforward inclusion in asset registers and quality records. As a category member of gauge pins (Messstifte), the component dovetails with standard inspection jigs and fixture checks; labelling and identifiers help maintain audit trails and simplify lot‑based quality reviews. For buyers seeking consistent, workshop‑grade verification tools, this pin offers a pragmatic combination of precision and practical handling. For precise end‑measurements and integration advice, contact Metav Werkzeuge — our Metav IndustryLine experts in Emmerich will confirm suitability and supply the M323.856 directly to your facility Technical data Article number: M323.856 GTIN: 4061905061776 Label: Prüfstift, einzeln, 8,56mm, +/- 0.001 mm Länge 50 mm Core technical data Nominal diameter: 8.56 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pins (Messstifte) FAQ What is the nominal diameter and tolerance of this gauge pin? The M323.856 gauge pin has a nominal diameter of 8.56 mm and a tolerance of ±0.001 mm for high‑precision checks. What measurement tasks is this pin intended for? Intended for end‑measurements and verification of bore diameters, the device serves as a single precision gauge pin for go/no‑go and fit inspections in workshop environments. What material and finish does the pin have? The pin is made from special steel and features a workshop‑grade finish designed to withstand routine handling while maintaining dimensional stability. How can this item be tracked in inventory and quality records? The product is listed under SKU M323.856 and GTIN 4061905061776 to support traceability, inventory management and audit documentation. How should the pin be handled to preserve accuracy? Keep the pin clean, avoid impacts and store in protective packaging when not in use to preserve surface condition and measurement accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.57mm Gauge Pin Length 50mm ±0.001mm Workshop Finish, Special Steel - Metav IndustryLine
The combination of ultra‑fine tolerance ±0.001 mm, a precise Ø 8.57 mm diameter and a compact 50 mm length makes this gauge pin ideal for reliable end‑measurement and assembly checks; delivered in a transport case for safe handling — order the M323.857 directly via Metav Werkzeuge or consult our specialists for application advice Gauge pin M323.857 — single gauge pin, Ø 8.57 mm, ±0.001 mm, 50 mm (Metav IndustryLine) A gauge pin M323.857 designed as a workshop‑grade test pin for high‑precision end‑measurements, component inspection and go/no‑go verification in production and maintenance environments Tolerance ±0.001 mm Diameter Ø 8.57 mm precision 50 mm length for confined measurements Special steel; workshop version Precision that suits production control This workshop‑grade test pin delivers an exceptionally fine tolerance of ±0.001 mm, which corresponds to one micron accuracy and supports tight quality tolerances in small‑part production. The Ø 8.57 mm diameter is turned and ground for a high‑quality surface finish, reducing measurement uncertainty when used as a reference mandrel or plug for bore checks. Such dimensional stability makes the pin suitable for repeatable end‑measurement tasks and helps maintain consistent inspection results across production batches. Practical design for everyday inspection tasks With a 50 mm length, the pin is compact enough to reach confined bores and to be handled comfortably during manual inspection sequences. The special steel material provides a balance of hardness and wear resistance suitable for workshop use, while the workshop specification ensures robustness under routine handling. Delivered in a transport case for secure movement between toolroom and shop floor, this test pin supports efficient measurement workflows without adding unnecessary handling risk. Clear benefit for quality assurance and assembly Using this single gauge pin simplifies go/no‑go checks and alignment operations, reducing inspection time and lowering the risk of assembly errors. The part functions as a stable reference for end‑dimension control, allowing technicians to verify mating fits and ensure conformity to specified end measurements. Where traceability and repeatability matter, the pin contributes to fewer rejects and a smoother production flow by providing a deterministic reference dimension for quick inspections Choose Metav IndustryLine gauge pins for dependable end‑measurement — contact Metav Werkzeuge GmbH in Emmerich for technical details or to secure units of the M323.857 via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.857 GTIN: 4061905062476 Category: Messstifte Facts Diameter: 8.57 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Special features Material: special steel Workshop version Delivered in transport case for safe handling Story trigger: end measurements FAQ What tolerance does the gauge pin offer? The M323.857 gauge pin is specified to a tolerance of ±0.001 mm, providing micron‑level accuracy for fine inspection tasks. Which materials is the pin suitable for checking? The pin itself is made from special steel and is intended as a dimensional reference for metallic and machined components during inspection and assembly. Is the gauge pin suitable for use on the shop floor? Yes, the workshop version of this test pin is designed for routine shop‑floor inspection and is delivered in a transport case to protect it during handling. How should the M323.857 be stored to maintain accuracy? Store the gauge pin in its transport case in a dry environment, away from heavy impacts and strong magnetic fields, to preserve the ground surface and dimensional integrity. Can the pin be used for alignment and go/no‑go checks? Yes, the compact 50 mm length and precise Ø 8.57 mm diameter make the pin well suited to alignment checks and simple go/no‑go verification during assembly Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.58mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Combine the pinpoint ±0.001 mm tolerance with a robust special steel construction and a practical 50 mm length for dependable end‑measurements and repeatable reference checks. Order the item directly via Metav Werkzeuge or consult their specialists for specification support and availability. M323.858 Gauge Pin — 8.58 mm, ±0.001 mm (Metav IndustryLine) The M323.858 is a precision gauge pin intended for end‑measurements and reference checks in workshop environments, engineered for repeatability and robust handling. Tolerance ±0.001 mm for repeatable fits Diameter 8.58 mm ground to size Length 50 mm workshop design Special steel construction for durability Reliability through micrometric accuracy High‑precision production of cylindrical reference parts reduces uncertainty in assembly and inspection processes. The ±0.001 mm tolerance denotes a micrometric clearance that helps to control fits and detect minimal deviations in bores and shafts; this level of accuracy typically lowers scrap rates and shortens adjustment cycles on production lines. By using a reliably ground 8.58 mm calibre, measurement chains gain a stable reference that supports consistent quality control and clear pass/fail criteria. Practical handling designed for workshop routines A compact 50 mm working length keeps the component easy to place and align in tight setups while preserving sufficient engagement for stable checks. The 50 mm form factor combined with the special steel mass offers a balance between tactile handling and thermal stability; short lengths reduce bending effects and improve operator repeatability during manual inspections. The single‑piece construction and workshop specification make this gauge suitable for routine end‑measurements, jig checks and quick go/no‑go verifications at the bench. Where this reference pin adds measurable value Use cases include end‑of‑line inspection, fixture verification and precision toolsetting where a stable reference diameter is required. A hardened, ground gauge pin shortens setup times and supports faster decision making in the metrology loop, which translates into higher throughput and fewer stoppages. The combination of material choice and tolerance provides confidence when matching mating parts, and it integrates readily into existing inspection jigs and comparator fixtures for immediate efficiency gains. Request specification confirmation or delivery options for the Metav IndustryLine gauge pin with ±0.001 mm tolerance from Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.858 GTIN: 4061905062483 Manufacturer: Metav IndustryLine Facts Diameter: 8.58 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.027 kg Special features Material: Special steel Version: Workshop execution Category: Gauge pins / Messstifte Story trigger: endmasse FAQ What is the stated dimensional tolerance? The specified tolerance for the M323.858 gauge pin is ±0.001 mm, providing micrometric repeatability for fit and inspection tasks. Which material is used for the gauge pin? The M323.858 is made from special steel, chosen for wear resistance and dimensional stability under typical workshop conditions. For which applications is this gauge pin suitable? Typical uses include end‑measurements, fixture checks, toolsetting and quick reference checks in production and inspection environments where an 8.58 mm reference is required. Is the item supplied as a single piece or in sets? This entry refers to a single gauge pin supplied individually for dedicated reference and replacement use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.59mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of absolute dimensional control and robust workshop design: a high‑precision 8.59 mm gauge pin with ±0.001 mm tolerance and a 50 mm shaft length provides reproducible end‑size verification for fixtures and gauges. Order or request advice via Metav Werkzeuge for reliable delivery and specification matching. Test pin M323.859 — workshop test pin, 8.59 mm diameter, ±0.001 mm, Metav IndustryLine The Test pin M323.859 is a workshop‑grade gauge pin designed for precise end‑size inspection and fixture alignment in precision engineering and quality control environments. *Precision diameter 8.59 mm ±0.001 *Length 50 mm for fixture compatibility *Workshop version for robust handling *Made from special steel Reproducible readings for stable production control The compact gauge pin delivers ±0.001 mm accuracy, giving a measurable step up from standard inspection tools and reducing uncertainty in pass/fail decisions. With a defined diameter of 8.59 mm, the pin is intended for direct go/no‑go checks and repeatable location tasks, so setup times are shortened and downstream rework is avoided. The tight tolerance supports statistical process control and enables reliable sampling without complex fixtures. Durable workshop design that keeps inspections running Manufactured from special steel, the pin withstands regular handling and offers resistance to wear in routine inspection tasks. The 50 mm shaft length is compatible with common gauge blocks, fixtures and threaded holders, permitting secure seating and stable contact. The workshop specification balances surface hardness and machinability so the pin remains serviceable over many inspection cycles while maintaining dimensional integrity. Micro‑range suitability for fine mechanical applications With a measurement range centred at 8.59 mm, this tool belongs to the micro category of small gauge pins suitable for fine mechanical and precision machining tasks. The compact format keeps handling ergonomic while minimising bending or misalignment during use. In small‑part assembly, instrument set‑up and toolmaking, the pin provides a dependable reference for short‑run verification and fixture checking without the overhead of larger gauge systems. Practical information for procurement and layout planning Delivered as a single gauge pin, the item is straightforward to integrate into existing inspection kits and jigs; its low mass supports rapid indexing and manual handling. The slim profile and workshop finish simplify insertion into tight bores and locating holes. For traceability, the manufacturer SKU and GTIN accompany the product documentation, making stock‑keeping and audit trails easy to maintain. Contact Metav Werkzeuge for tailored advice or to arrange procurement of the Metav IndustryLine test pin M323.859 to ensure compatibility with existing fixtures and inspection routines; local stock and technical consultants are available from Emmerich. Technical Data Article number: M323.859 GTIN: 4061905062490 Brand: Metav IndustryLine Accuracy: ±0.001 mm Diameter: 8.59 mm Length: 50 mm Material: Special steel Weight: 0.027 kg Version: Workshop Facts Diameter (nominal): 8.59 mm Tolerance: ±0.001 mm Shaft length: 50 mm Mass: 0.027 kg Special features Single item delivery Workshop execution End‑size reference application SKU: M323.859 FAQ What tolerance does the test pin provide? The test pin is specified with a tolerance of ±0.001 mm, enabling very fine end‑size verification in inspection routines. Is the pin suitable for fixture alignment in production? Yes; the 50 mm length and workshop design are intended for stable seating in fixtures and for reliable locating during assembly and measurement tasks. Which material is used for the pin? The pin is manufactured from special steel, chosen to balance wear resistance with dimensional stability under routine workshop conditions. Can this gauge pin be used for precision micro‑components? Its nominal 8.59 mm diameter places it in the micro range, making it appropriate for fine mechanical work, small bores and precision fixture checks. How is the product identified for procurement and stock purposes? The product is listed under article number M323.859 and GTIN 4061905062490 for ordering and inventory control. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.5mm Gauge Pin Single, ±0.001mm, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of uncompromising precision, robust workshop design and the compact 50 mm length for reliable end‑measure checks. The high tolerance of ±0.001 mm ensures reproducible results in fixture alignment and inspection tasks. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.850 — Test pin, Ø 8.50 mm, tolerance ±0.001 mm (Metav IndustryLine) The gauge pin M323.850 is a workshop‑grade test pin intended for end‑measure verification and fixture alignment in production and inspection environments. Workshop‑grade design Diameter 8.50 mm, tolerance ±0.001 mm Length 50 mm for end‑measure verification Manufactured from special steel Traceable accuracy for routine inspection The core advantage of this test pin is its specified ±0.001 mm tolerance, which is reflected in the manufacturing process and final inspection steps. Such a narrow tolerance limits measurement uncertainty and supports consistent pass/fail decisions during in‑process checks. In practice, the pin is used as a stable reference for locating features, checking bore diameters against end‑measure standards and confirming alignment in jigs and fixtures. The clearly defined diameter of 8.50 mm combined with the short, rigid length reduces deflection and ensures a reproducible contact geometry that is compatible with standard inspection protocols. Durable workshop construction for repeatable use Built as a workshop‑grade instrument, this test pin is produced from special steel selected for dimensional stability under repeated handling. The 50 mm length provides a compact working envelope that is easy to position and clamp in common fixture arrangements, while the modest mass supports secure tactile feedback during manual alignment tasks. This combination of material choice and form factor translates into fewer tool changes, less rework and steady throughput on the shop floor, especially where frequent reference checks are part of the process chain. Simple integration into measurement workflows Designed to complement existing inspection equipment, the gauge pin is listed under SKU M323.850 and can be recorded in traceability systems via its GTIN. The pin suits applications such as end‑measure verification, locating studies and fixture setup, where a defined contact surface and tight tolerance are required. Its compact profile means it can be used alongside calipers and bore gauges as a quick reference, speeding up checks without adding complexity to established procedures. For procurement and inventory purposes, the clear identification facilitates rapid replacement and consistent specification across multiple workstations. For procurement or technical guidance on integrating the Metav IndustryLine gauge pin into inspection routines, contact Metav Werkzeuge in Emmerich for tailored advice and reliable delivery Technical data Article number: M323.850 GTIN: 4061905061714 Brand: Metav IndustryLine Material: special steel Facts Diameter: 8.50 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Special features Workshop‑grade execution Category: gauge pins (test pins) Application: end‑measure verification, fixture alignment SKU: M323.850 FAQ What tolerance is guaranteed for this gauge pin? The specified tolerance is ±0.001 mm for the gauge pin M323.850, as manufactured under the Metav IndustryLine specification. What are the primary applications for this test pin? This test pin is intended for end‑measure verification and fixture alignment; it serves as a repeatable reference in inspection and setup tasks. Which material is used for the pin and why is that relevant? The pin is manufactured from special steel, chosen to provide dimensional stability and durability for workshop use. Is the 50 mm length suitable for fixture work? The 50 mm length of SKU M323.850 is compact enough for reliable handling and long enough for many locating and end‑measure tasks in jigs and fixtures. How is the part identified for procurement and traceability? Identification is via SKU M323.850 and GTIN 4061905061714; both are suitable for inventory and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.61mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Benefit from the combination of sub‑micron repeatability, robust special steel construction and a compact 50 mm length for reliable end‑measurements in workshop environments; order the gauge pin directly via Metav Werkzeuge or consult our specialists for tailored advice. Gauge pin M323.861 — 8.61 mm, ±0.001 mm, 50 mm (Metav IndustryLine) A gauge pin M323.861 designed for precise end‑measurements and verification tasks in workshop and inspection routines Sub‑micron accuracy ±0.001 mm Compact 50 mm length for tight fixtures Hardened special steel for durable service Workshop version optimised for daily use Reproducible measurements where tolerances matter The compact cylindrical gauge pin offers ±0.001 mm tolerance, a level of precision that supports fine verification work and short‑run inspection. Built from special steel, the pin resists wear and preserves dimensional stability, ensuring that plug and end‑measurements remain consistent over repeated use. This combination reduces rework and supports reliable quality control in machining and assembly processes. Practical form for tight jigs and gauges A 50 mm overall length with an 8.61 mm diameter provides a balance between accessibility and stiffness; the short, rigid design is easier to index in fixtures and reduces bending compared with longer probes. The single, workshop‑grade configuration simplifies handling during set‑up and routine checks, while the compact mass contributes to safe, ergonomic use in a busy production environment. Built for the workshop and traceable inspection chains Supplied as an individual gauge pin, the component is intended for immediate integration into test fixtures or as a reference master for end‑measurements. The robust surface and construction minimise profile change, which together with the tight tolerance contributes to quicker go/no‑go decisions at the control station. For purchases from Metav IndustryLine, procurement and quality teams gain a trusted supply channel that supports uninterrupted measurement routines. For durable, high‑accuracy end‑gauging choose the Metav IndustryLine M323.861 — contact Metav Werkzeuge for purchasing and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.861 GTIN: 4061905062513 Label: Gauge pin, single, 8.61 mm, ±0.001 mm, length 50 mm Dimensions & precision Diameter: 8.61 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Materials & features Material: special steel Workshop version Single item supply Compact design for fixture use FAQ What level of precision does this gauge pin offer? The gauge pin M323.861 provides a tolerance of ±0.001 mm, suitable for high‑precision end‑measurements and fine verification tasks in workshop inspection. Is the material suitable for repeated use in a production environment? Yes — the M323.861 is manufactured from special steel and finished for durability, which helps maintain dimensional stability under frequent handling. Can this gauge pin be used in fixture and jig applications? The compact 50 mm length and rigid form factor make this gauge pin well suited for mounting in jigs, fixtures and for use as a reference pin in assembly and test layouts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.62mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise tolerance and robust workshop design for reliable end‑mass checks; the small form factor and low weight allow fast handling and repeatable seating in fixtures. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.862 — 8.62 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) The Gauge pin M323.862 is a single, high‑precision test pin designed for end‑dimension verification and go/no‑go seating checks in workshop and inspection environments. Workshop grade construction Diameter 8.62 mm, tolerance ±0.001 mm Length 50 mm for secure locating Made from special steel for durability Precision that secures measurement integrity The gauge pin delivers a certified ±0.001 mm tolerance on an exact 8.62 mm diameter, making it suitable for high‑accuracy end‑dimension checks and plug seating tests. This level of precision minimises rework and rejects in quality control by providing a clear go/no‑go condition for bore and seating features. The compact 50 mm length and low mass contribute to quick thermal stabilisation and reduce measurement drift during short inspection runs, while the solid construction supports repeatable contact conditions. Designed for workshop efficiency and handling Built as a workshop grade tool, the pin combines a compact profile with robust material choice to withstand frequent handling. The slim form permits rapid insertion into gauges and fixtures, speeding up cycle times in busy inspection benches. Thanks to the low weight, the pin seats easily in mandrels and jigs without exerting excessive load on delicate assemblies. Where throughput matters, using a dedicated gauge pin reduces time per check and keeps production moving with consistent results. Traceable quality and applicability in inspection workflows Material choice—special steel—ensures wear resistance under repeated contact while maintaining surface integrity for accurate seating. The item is supplied as a single, individually identifiable pin (SKU M323.862, GTIN 4061905062520), facilitating inventory control and traceability in quality systems. Its specification supports use in a wide range of metrology tasks such as inspecting bore diameters, alignment pins and end‑mass verification in assembly processes; the precise tolerance is particularly valuable where small clearance fits are required. Contact Metav Werkzeuge today to reserve M323.862 for immediate dispatch or to request guidance on integrating this gauge pin into existing inspection routines; Metav Werkzeuge is available for technical consultation and stock queries. Technical Data Article number: M323.862 GTIN: 4061905062520 Material: special steel Net weight: 0.027 kg Length: 50 mm Facts Diameter: 8.62 mm Tolerance: ±0.001 mm Packaging: single item delivery Category: gauge pin / test pin Special features Workshop execution Low mass for quick thermal stabilisation Suitability: end‑dimension and seating checks FAQ What is the exact tolerance of the gauge pin? The gauge pin M323.862 is specified to a tolerance of ±0.001 mm, suitable for fine end‑dimension checks and precise seating verifications. Which materials is this test pin suitable for inspecting? The M323.862 gauge pin is a measurement standard used to verify bores and seating features across typical engineering materials; the pin itself is manufactured from special steel for wear resistance. How should the pin be handled to preserve accuracy? Handle the inspection pin with clean, dry hands or gloves and avoid impacts; store the pin in its transport packaging between uses to protect the surface and preserve the ±0.001 mm tolerance. Is the M323.862 suitable for fixture alignment as well as bore checks? Yes, the 50 mm length and precise 8.62 mm diameter make the pin useful for both alignment and end‑mass seating applications in fixtures and jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.63mm Test Probe ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra-fine tolerance, workshop-ready robustness and compact length for reliable end-measurements in production control; order the test pin directly via Metav Werkzeuge or contact the consultants for specification matching and delivery advice. Test pin M323.863 — precision gauge pin, Ø 8.63 mm, ±0.001 mm (Metav IndustryLine) The Test pin M323.863 is a single, hardened gauge pin designed for precise end-dimension checks and fixture setting across workshop and inspection environments. Workshop version, robust design Diameter 8.63 mm with matched end dimension Tolerance ±0.001 mm high accuracy Supplied in transport case Precision where end dimensions determine part quality The solid cylindrical probe provides ±0.001 mm tolerance, making it suitable where repeatable end measurements are critical. As a compact gauge pin, it reduces uncertainty in go/no‑go checks and setting operations; the true benefit is a consistent reference diameter that shortens inspection cycles and raises confidence in pass/fail decisions. The small mass and short overall length of 50 mm contribute to low thermal drift and easier handling at the bench, so metrology routines run faster and with demonstrably lower scatter. Built for everyday workshop use with measurement-grade material Manufactured from special steel, the component combines surface hardness with corrosion resistance appropriate for routine shop floor use. The workshop version designation indicates a balance of wear resistance and practicality: the probe withstands repeated seating in fixtures and transfer between operators while preserving the calibrated diameter. Where fixed gauges or reference pins are used in assembly jigs, this probe offers longevity and stable contact behaviour, supporting reduced rework and improved production throughput. Practical handling, storage and integration into inspection routines At 8.63 mm nominal diameter and a compact profile, the pin fits common locator holes and standard checking fixtures without modification. Supplied in a transport case, the item arrives protected and ready for immediate use, which simplifies inventory handling and reduces the risk of transit damage. The design supports rapid substitution in measurement benches and is compatible with manual and automated checking setups that require fixed-diameter references for positional or dimensional verification. For immediate specification matching or to request delivery of the M323.863 test pin from Metav IndustryLine, contact Metav Werkzeuge for expert advice and fast dispatch at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.863 GTIN: 4061905062964 Label: Test pin, single, 8.63 mm, ±0.001 mm, length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 8.63 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Special features Material: special steel Workshop version Supplied in transport case FAQ What tolerance can be expected from this gauge pin? The M323.863 test pin is specified with a tolerance of ±0.001 mm, providing the fine dimensional control required for precise end-measurements. Is the probe suitable for fixture setting and go/no‑go checks? Yes, the compact geometry and stable diameter of the gauge pin make it well suited to fixture setting and go/no‑go applications in both production and inspection contexts. What material is the pin made from and how does that affect wear? The pin is made from special steel; this gives good wear resistance for routine workshop use while maintaining dimensional stability over repeated contact cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.64mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
The precise combination of ±0.001 mm tolerance, a compact 8.64 mm diameter and robust special steel construction ensures repeatable end-measure verification and long service life in workshop environments; order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.864 — 8.64 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The Gauge pin M323.864 is a workshop-grade precision pin for end-measure checks and fit verification in small-bore inspection and assembly tasks. Workshop-grade 50 mm length Diameter 8.64 mm with ±0.001 mm tolerance Special-steel construction for durability Supplied in a protective transport case Precision for reliable go/no-go and fit verification A nominal diameter of 8.64 mm combined with a guaranteed ±0.001 mm tolerance delivers the dimensional certainty required for fine tolerance checks and end-measure verification. The exceptionally tight tolerance reduces measurement scatter and supports reproducible pass/fail decisions during incoming inspection or final assembly. Where measurement uncertainty must be minimised, the compact geometry of this inspection pin avoids bending and seating errors typical of longer pins, while the short 50 mm length keeps handling straightforward during batch checks. The result is faster inspection cycles with clear, traceable outcomes. Robust construction for repetitive workshop use Manufactured from special steel, this workshop version is designed for repeated insertion and extraction without losing form accuracy. The material choice provides elevated wear resistance and dimensional stability under normal workshop stresses, so calibration intervals can be planned rather than reactionary. Supplied in a transport case, the pin is protected during storage and transport, reducing the risk of nicks or contamination that could affect measurement performance. The overall design favours durability and low lifetime cost while maintaining the small-footprint handling that precision shops require. Suited to micro-range inspection and end-measure tasks Positioned at the lower end of the micro-range inventory, this pin is intended for extremely compact bore checks, gauge blocks complements and end-measure controls where high repeatability is crucial. Its size and tolerance make it suitable for precision jig, fixture and component validation in mechanical workshops and metrology benches. The product supports efficient integration into existing inspection routines and complements laboratory and shop-floor workflows that prioritise quick, unambiguous dimensional checks. Contact Metav Werkzeuge for stock availability and tailored application advice on the Metav IndustryLine gauge pin M323.864, or request technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M323.864 GTIN: 4061905062971 EClass: 21170231 Facts Diameter: 8.64 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.027 kg Special features Material: special steel Workshop version Supplied in transport case Single pin delivery FAQ What level of accuracy can be expected from this gauge pin? The gauge pin M323.864 achieves a dimensional tolerance of ±0.001 mm, making it suitable for precise end-measure checks and tight fit verification in workshop environments. Which materials is the pin intended to inspect or interface with? The Metav IndustryLine gauge pin M323.864 is a hardened special-steel pin designed to work with typical metallic components during fit and bore inspections; it is intended as an inspection tool rather than a cutting or forming implement. How should the gauge pin be stored between uses? The M323.864 is supplied in a protective transport case; storing the pin in its case minimises the risk of surface damage and helps maintain the specified ±0.001 mm tolerance over many cycles. Is this pin suitable for fixture and jig checks on small components? Yes, the compact 8.64 mm diameter and 50 mm length make the gauge pin M323.864 well suited for fixture, jig and small-bore component checks where micro-range accuracy is required. Can the workshop version be used for repeated production checks? The workshop-grade construction of the Metav IndustryLine gauge pin M323.864 is intended for repeated insertion/extraction cycles in production inspection; its special steel composition balances wear resistance with dimensional stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.65mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, special steel construction and a compact 50 mm length for reliable end‑size inspection and consistent production quality. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if further technical information is required. M323.865 Gauge pin — 8.65 mm, ±0.001 mm (Metav IndustryLine) The M323.865 is a single precision gauge pin designed for end‑size checks and dimensional verification in workshop quality control and inspection routines. Workshop version for everyday use Tolerance ±0.001 mm for micrometre precision 50 mm length for confined bore and depth checks Delivered in protective case Accuracy that keeps production on target The gauge pin delivers a tolerance of ±0.001 mm (1 µm), which makes it suitable for high‑precision end‑size verification where tight limits decide pass or rework. That level of accuracy reduces uncertainty in go/no‑go comparisons and supports repeatable inspection routines, helping to shorten decision cycles on the shop floor. The tolerance is expressed as a clear numerical limit so measurement outcomes remain comparable across shifts and operators. Built to withstand workshop demands Manufactured from special steel, the pin combines surface hardness with corrosion resistance appropriate for regular use in industrial environments. The workshop version designation indicates a focus on robust finishing and handling rather than laboratory‑only finesse, providing a balance between durability and measuring performance. The compact geometry and modest mass aid safe handling and minimise the risk of accidental damage during transfer between fixtures. Practical form factor for common inspection tasks With an external diameter of 8.65 mm and a 50 mm length, the pin is intended for checking end dimensions, small bores and through‑holes where a short, rigid probe is essential. The single‑piece design simplifies use in bench fixtures and depth checks. The reduced overall length concentrates stiffness at the contact face, improving positional stability during insertion and withdrawal and thereby supporting more reproducible readings. Confidence through traceable identification The item is identified by SKU M323.865 and GTIN, enabling seamless inventory tracking and re‑orders within standard procurement systems. Supplied in a protective case, the pin arrives ready for careful storage and transport between measurement stations, lowering the risk of damage before first use. For operations seeking consistent inspection results, this traceability and protection contribute to measurable uptime gains. Contact Metav Werkzeuge for purchase information on the Metav IndustryLine M323.865 gauge pin or for bespoke technical advice—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.865 GTIN: 4061905061929 Manufacturer: Metav IndustryLine Facts Diameter: 8.65 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.027 kg Special features Material: special steel Workshop version finish Single gauge pin, inspection/test pin Supplied in protective case FAQ What is the dimensional tolerance of the gauge pin? The M323.865 gauge pin is specified with a tolerance of ±0.001 mm, providing micrometre‑level control for end‑size inspections. Which applications suit this inspection pin? This inspection pin is intended for end‑size checks, small bore verification and confined‑space dimensional checks where a short, rigid probe is required. Is the gauge pin supplied ready for storage and transport? Yes, the pin is supplied in a protective case to reduce handling damage and support safe storage between uses. How is the item referenced for orders and stock management? The product is listed under SKU M323.865 and can be ordered via Metav Werkzeuge; the GTIN 4061905061929 supports catalogue and procurement systems. Does the specification include material information? The pin is made from special steel, chosen to combine adequate hardness with corrosion resistance for workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.66mm Test Pin, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from the combination of ±0.001 mm accuracy, a precisely ground Ø 8.66 mm diameter and a compact 50 mm length for dependable end-dimension checks in production and inspection. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.866 – single inspection pin, Ø 8.66 mm, ±0.001 mm tolerance (Metav IndustryLine) A gauge pin M323.866 designed for fast verification of end dimensions and fitting checks in precision engineering and workshop inspection. ±0.001 mm tolerance Diameter 8.66 mm precision ground Length 50 mm, workshop-grade execution Delivered in a protective transport box Accuracy that secures production tolerances The core benefit is the high-precision tolerance of ±0.001 mm, which supports repeatable acceptance checks and reduces measurement uncertainty during assembly or final inspection. As a hardened, precision-ground inspection pin, it converts the nominal bore requirement into a simple go/no-go verification step, eliminating ambiguous fits. The combination of a finely finished shaft and tight geometric tolerances means fewer reworks and improved process reliability when measuring end dimensions or verifying mating parts. Compact, robust design for routine workshop use With a 50 mm length and a 8.66 mm diameter, the component is sized for ergonomic handling while providing enough engagement for representative fit checks in small to medium bores. The special steel construction and workshop execution ensure resistance to wear under frequent use; the surface finish aids in repeatable seating and minimal friction during insertion. Delivered in a protective transport box, the pin arrives ready for the bench and is protected during storage and transit, maintaining calibration and surface integrity. Practical benefits: traceability, compatibility and workflow gain This inspection pin is optimised for quick integration into standard inspection routines and gauging sets. The precise diameter makes it suitable for end-dimension control, assembly checks and spot verification during incoming inspection. Supplied as a single, individually identified pin, it supports traceability in quality records and can be fitted into existing gauge fixtures without modification. The clear labelling and compact format accelerate throughput on the inspection station and simplify tool inventory management. For consistent end-measurement control, request the Metav IndustryLine gauge pin M323.866 from Metav Werkzeuge for secure supply and application advice Technical data SKU: M323.866 GTIN: 4061905061936 Label: Prüfstein, einzeln, 8,66 mm, +/- 0.001 mm, Länge 50 mm Facts Diameter: 8.66 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Special features Material: special steel Workshop execution Delivered in protective transport box Category: gauge pins / inspection pins Storytrigger: end-dimension checks FAQ What applications are suitable for this inspection pin? The inspection pin is intended for end-dimension verification, fitting checks and quick go/no-go assessments in component inspection; the M323.866 is especially useful where tight diameter control is required. Is the diameter claim traceable for quality records? Yes, the M323.866 is supplied with clear identification (GTIN: 4061905061936) to support traceability and stock management in quality documentation. Can the pin be used in hardened or abrasive environments? The pin is made from special steel and designed for workshop use; its robustness provides good wear resistance for routine inspection, though service life depends on the specific environment and handling. How does the ±0.001 mm tolerance affect assembly checks? A tolerance of ±0.001 mm ensures that mating parts meet strict dimensional requirements: it converts tight nominal conditions into a straightforward mechanical check, reducing assembly uncertainty and potential rework. Is the inspection pin delivered ready for immediate use? The pin is supplied as a single item in a protective transport box, enabling immediate use at the inspection bench while preserving surface quality during storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.67mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade durability, micro‑tight tolerance and compact form factor to ensure repeatable end‑measure checks and fast fixture alignment; order the gauge pin directly from Metav Werkzeuge or contact our consultants for integration advice. M323.867 Test Pin — Gauge pin, Ø 8.67 mm, ±0.001 mm The M323.867 test pin is a workshop‑grade gauge pin designed for precise end‑measure verification, fixture alignment and reference checking in production and inspection environments. Workshop‑grade accuracy ±0.001 mm Ø 8.67 mm for end‑measure control 50 mm length for secure insertion and reach Reliable accuracy for repeatable inspection results High‑precision inspection workflows demand components that remove doubt from dimensional checks. This gauge pin delivers a certified micro‑tight tolerance of ±0.001 mm, providing a stable reference point for end‑measure verification and go/no‑go checks. The nominal diameter of 8.67 mm minimises eccentricity in fits while the controlled tolerance reduces variability between repeat measurements. As a consequence, setup time for jigs and fixtures is shortened and process capability improves, which supports higher first‑pass yields and fewer rework cycles. The compact mass and defined geometry also help prevent spring‑back or seating errors that can compromise otherwise accurate measuring chains. Built for everyday workshop use without sacrificing precision The pin is manufactured from special steel selected for wear resistance and dimensional stability under typical workshop conditions. The 50 mm length provides enough engagement for stable seating in bushings or fixture holes without becoming unwieldy during handling. The product is delivered as a single unit, making it suitable for occasional checks as well as for incorporation into bespoke inspection sets. The workshop‑grade design balances toughness with the surface quality required for reliable contact measurement, so the pin remains a dependable reference across frequent use. Simple integration into metrology and production routines As a standardised gauge pin, this element integrates smoothly into existing inspection procedures and gauge assemblies. Supplied individually and easy to identify by SKU, the component is useful as a reference in fixture build‑up, as a plug gauge for small‑bore checks or as a datum element in assembly jigs. The modest weight ensures handheld convenience while the robust material reduces the need for frequent replacement, contributing to lower operational interruptions. For laboratories and production lines seeking consistent end‑measure control without complex calibration demands, this precision pin offers a practical, low‑overhead solution. For rapid procurement of the M323.867 gauge pin and tailored advice on integrating it into inspection and fixture workflows, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com. Technical data SKU: M323.867 GTIN: 4061905061943 Label: Prüfstift, einzeln, 8,67mm, +/- 0.001 mm Länge 50 mm Core specifications Diameter: 8.67 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.027 kg Features and materials Material: Special steel Version: Workshop version Supplied: Single unit FAQ What is the dimensional tolerance of this gauge pin? The gauge pin is specified with a dimensional tolerance of ±0.001 mm, offering micro‑tight control ideal for precision end‑measure verification with the M323.867 gauge pin. Which material is used for the pin and what are the benefits? The component is made from special steel, chosen for its wear resistance and stability under workshop conditions, which helps maintain dimensional integrity over repeated use. Is the length suitable for fixture alignment and plug checks? Yes; the 50 mm length provides sufficient engagement for secure seating in fixtures and small‑bore checks while remaining easy to handle during alignment tasks. How is the product supplied for use in inspection sets? The item is supplied individually as a single gauge pin, making it suitable for ad‑hoc checks or inclusion in custom inspection assemblies. Can this pin be used as a reference in assembly jigs and inspection fixtures? Absolutely; the M323.867 gauge pin is intended for use as a datum or reference element in jigs, fixtures and plug‑gauge applications where consistent end‑measure control is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.68mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Finish - Metav IndustryLine
Take advantage of pinpoint dimensional control with a ±0.001 mm tolerance on an 8.68 mm diameter pin and a compact 50 mm length that eases handling and fixture use; order or consult Metav Werkzeuge for tailored inspection solutions. Gauge pin M323.868 — 8.68 mm, ±0.001 mm tolerance (Metav IndustryLine) Gauge pin M323.868 is a single test pin intended for precise end‑dimension verification and go/no‑go checks in workshop and inspection applications. Diameter 8.68 mm precision ground Tolerance ±0.001 mm for end‑dimension checks 50 mm overall length, stable handling Special steel for workshop applications Consistent dimensional control where it matters The core strength of this test pin lies in its ±0.001 mm declared accuracy, which supports reliable end‑dimension assessment and repeatable inspection routines. Designed for use in inspection benches, plug‑gage fixtures or manual go/no‑go checks, the component’s defined diameter of 8.68 mm reduces uncertainty in pass/fail decisions. Such tight tolerance is particularly valuable where small deviations lead to assembly issues or rework, enabling more consistent quality control and better production yields. Practical design for everyday workshop use With a compact 50 mm length and a mass of 0.027 kg, the component offers stable handling during manual gauging without becoming unwieldy. The pin is manufactured from special steel, providing a balance between dimensional stability and workshop resilience. The straightforward form factor simplifies fixture integration and storage; the short overall length minimises lever‑induced measurement errors and supports fast, ergonomic operation in routine inspection tasks. Easy integration into quality workflows The single test pin is useful as a reference element for end‑dimension checks, assembly jigs, and comparative measurements. Supplied for safe transport in a protective case, the component arrives ready for immediate use in production or inspection lines. As part of the Metav IndustryLine, the item benefits from a marketplace quality filter in Emmerich, offering accessible precision for workshops and small production environments that require dependable measurement aids for end‑dimension verification. Contact Metav Werkzeuge for ordering or technical advice on the Metav IndustryLine gauge pin M323.868; our specialists can recommend integration options and delivery from Emmerich to your workshop. Technical Data Article number: M323.868 GTIN: 4061905061950 E‑class: 21170231 Facts Diameter: 8.68 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.027 kg Special features Material: Special steel Workshop version Delivered in transport case Single test pin FAQ What tolerance does this gauge pin offer? The Metav IndustryLine gauge pin M323.868 is specified with a tolerance of ±0.001 mm, suitable for precise end‑dimension checks. What is the exact diameter and length of the pin? The test pin has a diameter of 8.68 mm and an overall length of 50 mm, dimensions intended for small‑format inspection tasks. Which material is used for the pin? The pin is made from special steel, a material choice for stable dimensional behaviour in workshop environments. Is the pin suitable for fixture or jig use? Yes, the compact 50 mm length and precise diameter make this pin appropriate as a reference element in fixtures, jigs and manual inspection setups. How is the part supplied for transport? The item is supplied in a protective transport case to ensure safe delivery and immediate readiness for use in inspection processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.69mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine accuracy and robust special steel for repeatable end‑dimension checks; place orders through Metav Werkzeuge or consult our specialists for specification matching. Gauge pin, single 8.69 mm, ±0.001 mm accuracy — Metav IndustryLine The gauge pin, single 8.69 mm serves as a precision inspection pin for dimensional verification and end‑dimension control in quality assurance and production inspection. Workshop version for robust use Diameter 8.69 mm, tight dimensional match Measurement accuracy ±0.001 mm Length 50 mm in special steel Precision that secures inspection results The core advantage of this inspection component is its declared accuracy of ±0.001 mm, which enables reliable pass/fail decisions and tight tolerance assessments. A declared tolerance at this level positions the pin in the fine metrology class, suitable where sub‑micron repeatability and traceable measurement steps matter. By using a hardened reference made from special steel, the element maintains dimensional stability under normal workshop handling, reducing drift during routine gauging and ensuring that comparative checks remain meaningful over many cycles. Practical design for workshop environments Built as a workshop‑grade single gauge pin, the item combines an exact diameter of 8.69 mm with a practical 50 mm shank length to reach into bores or mating features without excessive overhang. The compact form and modest mass support straightforward manual handling and quick insertion into fixtures or test nests, which helps keep inspection throughput high. Thanks to the straightforward geometry, calibration against a master standard or integration into a gauge set is uncomplicated, so quality teams can embed the pin into existing inspection routines with minimal adaptation. How the tight tolerance improves process control Using a measurement artefact with a tolerance of ±0.001 mm reduces uncertainty in dimensional reporting and shortens feedback loops for machining corrections. When incorporated into first‑piece inspection or random in‑process checks, the pin helps to identify trend shifts before costly rework occurs. The combination of a narrow diameter tolerance and a stable steel substrate supports repeatable contact conditions; this is particularly beneficial for shops that run batch processes and require consistent gauging to maintain yield and reduce scrap. Handling, storage and traceability notes The gauge pin is supplied as a single, individually identified item (SKU M323.869) suitable for incorporation into gauge blocks, nests or simple fixture arrays. Its modest weight and compact size make manual handling intuitive, while the clear dimensional specification simplifies documentation and traceability. Where formal traceability or customised calibration is required, Metav Werkzeuge’s specialists can advise on calibration intervals and integration into quality control documentation to maintain measurement confidence across production runs. Contact Metav Werkzeuge today to discuss specification matching and to secure the Metav IndustryLine gauge pin M323.869 for reliable control of end dimensions Technical data Article number: M323.869 GTIN: 4061905061967 Brand: Metav IndustryLine Facts Diameter: 8.69 mm Length: 50 mm Declared accuracy: ±0.001 mm Weight: 0.027 kg ECLASS: 21170231 Special features Material: special steel Design: workshop version Intended use: end‑dimension checks Packaging: single item delivery FAQ What level of accuracy can be expected from this gauge pin? The Metav IndustryLine gauge pin M323.869 is specified with a declared accuracy of ±0.001 mm, enabling fine tolerance verification in inspection routines. Is the gauge pin suitable for insertion into common gauge nests and fixtures? Yes, the single gauge pin is intended for use in nests, fixtures and direct comparative measurements where an 8.69 mm reference is required. Which materials is the pin made from and why does that matter? The pin is manufactured from special steel, selected for its dimensional stability and wear resistance, which helps preserve the declared tolerance during typical workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.6mm Gauge Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial accuracy, robust workshop design and simple traceability to improve inspection reliability; order the test pin via Metav Werkzeuge or request advice from our consultants for tailored measurement solutions. Test pin M323.860 — 8.60 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A Test pin M323.860 designed for precision end‑measurement and inspection tasks in workshop and metrology environments Tolerance ±0.001 mm Diameter 8.60 mm Length 50 mm Workshop‑grade special steel Guaranteed repeatability for end‑gauge checks The pin delivers a measured tolerance of ±0.001 mm, ensuring consistent, repeatable reference points for end‑gauge and go/no‑go verification tasks. Such high resolution reduces ambiguity in pass/fail decisions and supports tighter quality control protocols on production lines. With a nominal diameter of 8.60 mm and a defined length of 50 mm, the component serves as a reliable datum for alignment checks, seating verification and final inspection stages where micrometric certainty prevents rework and rejects. Built for workshop handling and long service life Manufactured from special steel in a workshop‑grade execution, the pin tolerates routine handling and fits into standard inspection jigs and fixture arrays. The compact mass (approx. 0.027 kg) and single‑item supply simplify storage and usage in both bench and inline inspection contexts. The robust material choice maintains geometric stability under normal workshop conditions, helping to preserve the high accuracy over repeated cycles and minimising wear‑related drift in the measuring process. Simple integration into measurement routines Traceable identification (SKU M323.860, GTIN 4061905062506) and a straightforward form factor ease the adoption of this pin into existing metrology workflows. The simple cylindrical geometry supports quick seating in gauge blocks, nests or fixture bores and reduces setup time during batch checks. Using a defined, high‑accuracy reference like this measuring pin streamlines quality documentation and contributes to consistent process control across shifts and teams. Contact Metav Werkzeuge for advice on integrating the Metav IndustryLine test pin M323.860 into inspection systems or for a bespoke supply recommendation — Metav Werkzeuge GmbH, Parkring 45, Emmerich (phone +49 2822 7131930, email info@metav-werkzeuge.com) Technical Data Article number: M323.860 GTIN: 4061905062506 Brand: Metav IndustryLine Supply: single item Facts Diameter: 8.60 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.027 kg Special features Material: special steel Version: workshop execution Intended use: end‑measurement / inspection Accuracy data: ±0.001 mm FAQ What tolerance does the test pin offer? The test pin M323.860 is specified with a tolerance of ±0.001 mm, suitable for fine inspection and reference measurements. Is the pin supplied individually or in sets? The product is supplied as a single test pin (single item supply), ideal for replacement or selective integration into existing gauges. Which materials and applications suit this measuring pin? Manufactured from special steel in a workshop execution, the pin is intended for end‑gauge checks, fixture seating and routine inspection tasks in metalworking environments. What are the physical dimensions of the pin? The pin has a diameter of 8.60 mm and a length of 50 mm; refer to SKU M323.860 for ordering and stock details. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.71mm Test Pin ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Combining micrometre‑level accuracy, a hardened special steel body and a compact 50 mm length, this precision gauge pin delivers reproducible bore checks and robust in‑shop performance; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. M323.871 — precision gauge pin, 8.71 mm, ±0.001 mm (Metav IndustryLine) The M323.871 is a single precision gauge pin for fast end‑measure verification of bores and fits in workshop inspection and quality control. Workshop version for robust daily use Tolerance ±0.001 mm for micrometre accuracy Special steel construction for long service life Supplied in a protective transport case Repeatable accuracy that reduces inspection uncertainty The core benefit of this precision pin is its ±0.001 mm conformity, which enables repeatable verification of bore diameters during routine quality checks. With a nominal diameter of 8.71 mm and a compact 50 mm overall length, the pin is well suited for final measure checks and tolerance control where micrometre precision is required. The stated accuracy reduces the need for rework by providing a clear go/no‑go reference and supports faster decision making on the shop floor. Built for the workshop: durability and handling advantages Designed as a workshop version, the gauge pin is made from special steel and hardened for wear resistance, offering stability under frequent use. The short length and low mass (approx. 0.028 kg) make handling straightforward while minimising bending or operator‑induced error in manual checks. Supplied in a protective case, the pin is ready for transport between inspection stations and benefits from reduced risk of surface damage during storage or transit. Simple integration into inspection routines and documentation The compact geometry and clear specification make this pin easy to include in established inspection protocols: its nominal diameter and tolerance can be recorded directly in traceability records and accompanying QC sheets. The small footprint enables use in confined measuring fixtures or when checking nested components, accelerating throughput. For traceable inventory and ordering, the item is identified by SKU M323.871 and GTIN 4061905061981, simplifying procurement and stock control. Contact Metav Werkzeuge in Emmerich for tailored application advice or to request delivery of the M323.871 precision gauge pin via Metav Werkzeuge Technical data Article number: M323.871 GTIN: 4061905061981 Manufacturer: Metav IndustryLine Category: Gauge pins / Messstifte Label: Prüfstift, einzeln, 8,71 mm, ±0.001 mm, length 50 mm Facts Diameter: 8.71 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.028 kg Special features Material: special steel Version: workshop execution Supplied in protective transport case Accuracy class: micrometre level FAQ What is the nominal diameter and tolerance of the pin? The pin has a nominal diameter of 8.71 mm with a tolerance of ±0.001 mm for micrometre‑level checks using the M323.871 gauge pin from Metav IndustryLine. Is the pin suitable for repeated workshop use? Yes, the workshop execution and the special steel construction of the M323.871 are specified for robust daily use and resistance to wear. Can the pin be used for final inspection of bores and fits? The M323.871 is intended for end‑measure verification and is appropriate for final inspection tasks where a precise diameter reference is required. How is the pin supplied for transport and storage? The product is supplied in a protective transport case to reduce handling damage and to facilitate safe movement between inspection points. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.72mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, a compact 50 mm length and robust special steel construction for reliable end‑dimension checks and consistent production control. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Gauge Pin M323.872 — 8.72 mm Ø, ±0.001 mm, 50 mm length A Gauge Pin M323.872 for precision end‑dimension inspection and workshop verification of small bore and mating features. High precision ±0.001 mm Diameter 8.72 mm for end‑dimension checks Compact length 50 mm for stable handling Workshop execution with special steel construction Precision that prevents rework and saves time The core benefit of this test pin is its high precision: with a declared deviation of ±0.001 mm, the component‑level checks become a reliable pass/fail decision instead of an estimate. This level of tolerance reduces the need for repeated measurements and downstream rework, improving throughput in quality control loops. The exact diameter specification supports reproducible gauge comparisons and makes the pin suitable for use in go/no‑go fixtures and inspection benches. Robust build for repeatable contact and low wear Manufactured from special steel, the pin balances hardness and toughness to withstand frequent contact without premature wear. The 50 mm active length and the compact mass (approx. 0.028 kg) deliver stable handling and a low moment of flexion, which contributes to consistent seating in bores and on reference faces. The workshop execution signals a component designed for everyday industrial use, offering mechanical resilience where repeatability matters. Practical application and integration into inspection routines Designed as a single-piece test pin, this plug gauge serves in end‑dimension checks, reference measurements and assembly verification of mating parts. The tool is particularly appropriate for bench testing and small‑series inspection where a precise master diameter is required. Traceability is supported by the included GTIN and clear designation, simplifying inventory and documentation within regulated production processes. The compact format also makes the pin easy to store in a gauge set or tool tray without occupying excessive space. Contact Metav Werkzeuge in Emmerich for application advice, availability details and to secure this Metav IndustryLine gauge pin for precise end‑dimension inspections; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data SKU: M323.872 GTIN: 4061905062612 Designation: Gauge pin, single, 8.72 mm, ±0.001 mm, length 50 mm Material: Special steel Weight: 0.028 kg Special execution: Workshop version Facts Diameter: 8.72 mm Tolerance: ±0.001 mm Length: 50 mm Mass: 0.028 kg Special features Single piece supply Suitable for end‑dimension inspection Category: Gauge pins Workshop design for daily industrial use FAQ What tolerance does the gauge pin offer and how does it affect inspection? The gauge pin has a tolerance of ±0.001 mm, which allows for decisive pass/fail checks and reduces measurement uncertainty during end‑dimension verification with the Metav IndustryLine gauge pin (SKU M323.872). Which material is used and why is it advantageous? The pin is made from special steel, chosen for a balance of hardness and toughness that resists wear and maintains dimensional stability under repeated use. Can this pin be used for go/no‑go checks on small bores? Yes, the diameter 8.72 mm and the compact 50 mm length make the pin suitable as a go/no‑go reference in bench fixtures and assembly controls. Is the gauge pin suitable for frequent workshop handling? The workshop execution and robust material make this plug gauge well suited to regular use in production and inspection environments. How is the component identified for inventory and traceability? Identification is facilitated by the SKU M323.872 and the GTIN 4061905062612, allowing straightforward record keeping and integration into inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.73mm Gauge Pin, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of a workshop-grade inspection tool with a tight ±0.001 mm tolerance and a compact Ø 8.73 mm form factor for reproducible end‑measurements; the 50 mm overall length and special steel construction support robust everyday use. Order the gauge pin directly via Metav Werkzeuge or consult our technical advisors for application‑specific guidance. Gauge pin M323.873 — precision test pin, Ø 8.73 mm, ±0.001 mm (Metav IndustryLine) A gauge pin M323.873 for precise end‑measurement and fit checks in workshop and inspection environments, supplied as a single, workshop‑grade test pin with a 50 mm nominal length Workshop‑grade construction Diameter 8.73 mm, tolerance ±0.001 mm 50 mm overall length for end‑measurements Supplied in a protective transport case Stable tolerances for consistent inspection results The extremely tight ±0.001 mm tolerance is the defining performance metric of this precision pin and translates directly into more reliable go/no‑go checks and end‑measure verifications. With a nominal diameter of 8.73 mm, the pin is produced for applications that demand repeatable fits and minimal clearance variability. In practical terms, this level of accuracy reduces rework and rejects by ensuring that measured components either conform or fail clearly; the pin becomes a deterministic reference in quality control sequences rather than a subjective measurement aid. Designed for workshop use and daily handling Constructed from special steel and specified as a workshop‑grade item, the pin resists wear while remaining economic to operate in a production environment. The 50 mm length offers sufficient engagement for most end‑measurement tasks without compromising rigidity, and the compact form factor keeps handling straightforward on the shop floor. Supplied in a protective transport case, the pin arrives ready for secure storage and safe transfer between measurement stations, prolonging life and preserving the calibrated surface where applicable. Simple integration into inspection workflows As a compact, precision reference, this test pin suits micro‑range measurements (the pin falls in the micro measurement class for tools with a maximum measuring range under 10–100 mm), making it ideal for fine mechanical assemblies, small bore checks and tooling set‑up. The simple geometry allows quick visual checks and fast tactile insertion, reducing cycle time in repetitive inspections. Combined with clear traceability via the SKU and GTIN, the pin supports structured inspection protocols and inventory control within an established metrology system. For application advice or to obtain the Metav IndustryLine gauge pin M323.873 for workshop inspection, contact Metav Werkzeuge in Emmerich or request tailored technical guidance from our consultants Technical data Article number: M323.873 GTIN: 4061905062629 Label: Prüfstift, einzeln, 8,73mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 8.73 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.028 kg Special features Material: Special steel Workshop version Supplied in protective transport case Category: Gauge pins eClass: 21170231 FAQ What is the intended application for this gauge pin? This gauge pin M323.873 is intended for precise end‑measurement and fit checks in workshop inspection, tooling set‑up and component verification. How tight is the tolerance and what does it mean for inspection? With a tolerance of ±0.001 mm, the M323.873 offers high repeatability so that pass/fail decisions in quality control are based on a deterministic reference rather than subjective judgement. Which materials and environments suit this pin? Made from special steel, the pin is designed for everyday workshop use and handles normal production wear; it is best employed for small bore checks and micro‑range assemblies. Is the pin supplied ready for storage and transport? Yes, the pin is supplied in a protective transport case to preserve the measuring surface and simplify safe handling between inspection stations. How does this pin fit into measurement classifications? The dimensions place the pin in the micro measurement class (maximum range under 10–100 mm), which is suited to fine mechanical work and small component inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.74mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial accuracy, compact handling and robust workshop construction for dependable end‑measurement checks. Benefit from a tight ±0.001 mm tolerance on an 8.74 mm nominal diameter combined with a practical 50 mm length; order the gauge pin directly via Metav Werkzeuge or request advice from our consultants. Gauge pin M323.874 — single precision pin, 8.74 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.874 is a workshop‑grade precision pin for end‑measure references and plug checks, designed for repeatable dimensional verification in small to medium‑sized assemblies. Single gauge pin 8.74 mm nominal High tolerance ±0.001 mm 50 mm usable length Workshop‑grade special steel construction Consistent sub‑micrometre accuracy for quality control The central advantage of this gauge pin is its ±0.001 mm tolerance, which corresponds to 1 micrometre and enables high‑precision end‑measure verification where small deviations matter. Such accuracy supports reliable go/no‑go checks, alignment of mating parts and final inspection steps in machining or assembly processes. The tight tolerance reduces uncertainty in acceptance decisions and helps maintain consistent quality levels across production batches. Robust, compact design tailored for workshop use Manufactured in special steel and specified as a workshop version, the pin balances hardness and wear resistance with manageable handling. The 50 mm length offers a usable contact zone that remains stiff and easy to position by hand or in fixtures, making the pin suitable for bench inspections and small‑fixture use. Its compact mass and geometry also reduce the risk of deflection during short, repeat measurements, improving reproducibility in everyday shopfloor tasks. Practical integration into inspection routines This single pin functions as a reliable end‑measure reference for plug checks, slot gauging and dimensional comparison of turned or ground components. The nominal 8.74 mm diameter provides a defined reference for GO/NO‑GO tests and fits inspection jigs where tight concentricity and diameter control are required. Supplied as an individual item with clear identification (SKU M323.874, GTIN 4061905062636), the pin is simple to catalogue and replace within existing inspection sets. Choose this Metav IndustryLine gauge pin M323.874 for repeatable end‑measure checks — contact Metav Werkzeuge for stock details and application advice. Technical data SKU: M323.874 GTIN: 4061905062636 Category: Gauge pins Label: Single gauge pin 8.74 mm ±0.001 mm, length 50 mm Core measurements Diameter: 8.74 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.028 kg Materials & features Material: Special steel Version: Workshop execution Intended use: End‑measure references and plug checks ECLASS: 21170231 FAQ What is the exact tolerance of the pin and what does it mean? The pin is specified at ±0.001 mm, which equals 1 micrometre; this level of accuracy supports fine acceptance checks and critical dimensional verifications. Which materials and environments suit this pin? Made from special steel and built as a workshop version, the pin performs well in standard machine‑shop and quality‑control environments for routine dimensional checks. How is the pin best used in inspection processes? The pin serves as an end‑measure reference for plug checks, GO/NO‑GO verifications and alignment tasks in fixtures; its 50 mm length gives a stable contact area for repeatable measurements. What identifiers should be noted when ordering or stocking? Refer to SKU M323.874 and GTIN 4061905062636 for ordering, inventory and traceability within quality documentation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.75mm Gauge Pin ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Combine the high dimensional stability of ±0.001 mm accuracy with a compact 8.75 mm diameter and 50 mm length to create a dependable reference for fit and assembly checks; order the gauge pin directly via Metav Werkzeuge or consult our advisors for application support. Gauge pin M323.875 — 8.75 mm Ø, ±0.001 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.875 is a workshop-grade precision pin designed for reference measurements, fit checks and assembly controls in inspection and production environments. High precision ±0.001 mm Diameter 8.75 mm for tight-fit checks 50 mm length suited to assembly controls Workshop-grade single-piece supply Precision that delivers repeatable reference readings The exceptionally fine tolerance of ±0.001 mm positions this gauge pin among high-precision reference tools, giving a repeatability level appropriate for demanding inspection tasks. Manufactured as a single-piece workshop version, the pin serves as a stable reference measurement for verifying bore diameters, plug fits or for transferring a verified size into assembly verifications. The compact geometry reduces leverage and distortion during use, supporting consistent results in everyday quality control. Makes inspection and assembly workflows more efficient With a nominal diameter of 8.75 mm and a 50 mm nominal length, the pin simplifies go/no-go checks and assembly validation without complex fixturing. Its form factor suits rapid insertion into bores and jigs for immediate assessment, accelerating throughput in repetitive checks. The combination of small handling effort and high dimensional fidelity reduces inspection time while improving process reliability, a rational benefit for production departments focussed on measurable throughput gains. Robust handling and clear shop‑floor role Made from special steel, the pin is intended for workshop use where dimensional stability under routine handling is essential. The lightweight construction (approx. 0.028 kg) makes the component easy to position while retaining the mass needed for steady contact during measurement. Supplied as a single item in a workshop configuration, this gauge pin is immediately ready for service as a reference or test plug in inspection benches, assembly operations or tool setting procedures. For reliable reference measurements choose the Metav IndustryLine gauge pin and contact Metav Werkzeuge in Emmerich for personalised technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.875 SKU: M323.875 GTIN: 4061905062643 Manufacturer: Metav IndustryLine Core measurements Diameter: 8.75 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.028 kg Features and materials Material: Special steel Workshop version Single-piece delivery Category: Gauge pins FAQ What dimensional tolerance does the gauge pin offer? The Metav IndustryLine gauge pin M323.875 is specified to a tolerance of ±0.001 mm, providing high-precision reference values for inspection and fit validation. Is this pin supplied individually or as part of a set? This item is supplied as a single gauge pin; the product M323.875 is described and delivered as an individual workshop-grade reference component. For which tasks is the 8.75 mm pin most suitable? The 8.75 mm diameter and 50 mm length are suited to bore checking, plug-fit verification and assembly control tasks where a compact, high-accuracy reference is required. What material is the pin made from and what does that mean in practice? The pin is manufactured from special steel, offering dimensional stability and suitability for routine shop-floor use as a reference or test plug. How should the gauge pin be handled and stored to maintain accuracy? Handle the gauge pin M323.875 with care to avoid knocks or abrasion, store it dry and protected from dust and corrosive agents, and keep it in a stable environment to preserve the specified tolerance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.76mm Gauge Pin Single, ±0.001mm Accuracy, 50mm Length, Special Steel, Workshop Version - Metav IndustryLine
Precision gauge pin with a diameter of 8.76 mm, tolerance ±0.001 mm and a 50 mm length delivers repeatable, inspection-grade results; combine micron-level accuracy, robust special-steel construction and compact dimensions for reliable fixture checks. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.876 – single test probe, Ø 8.76 mm, ±0.001 mm (Metav IndustryLine) Gauge pin M323.876 provides a compact, high-precision reference for dimensional inspection and fixture validation in production and laboratory contexts Diameter 8.76 mm for tight fits Tolerance ±0.001 mm high precision 50 mm length for fixture compatibility Workshop grade, special steel construction Built for micron-level repeatability in inspection The steel test pin is manufactured to a tolerance of ±0.001 mm, which places it in the category of high-precision reference pins for dimensional control. Such a tight tolerance reduces measurement uncertainty during go/no-go checks and component validation, ensuring that short series runs and serial inspections run with consistent results. The combination of a defined 8.76 mm diameter and precise manufacturing means the probe functions as a stable datum for repeat measurements, supporting faster decision cycles on the shop floor and in quality control. Integrates smoothly into inspection fixtures and gauges With a 50 mm working length and compact form factor, this single probe is suitable for insertion into fixtures, comparator setups or manual gauge rigs where space and rigidity matter. The test pin’s dimensions offer a good balance between reach and stiffness, reducing deflection during handling. In practice, the pin simplifies fixture design by providing a standardised datum that is easy to replace and that maintains measurement stability across repeated operations, which shortens set-up time and improves throughput. Robust construction for everyday workshop use Made from special steel, the probe is designed for repetitive use in workshop conditions without premature wear. The material selection and workshop-grade specification prioritise longevity and surface integrity, so the pin remains a dependable reference through many inspection cycles. The lightweight design (approx. 0.028 kg) and compact size support straightforward handling and storage while preserving the dimensional properties required for accurate checks. Practical benefits for procurement and quality teams Specifying a dedicated test pin streamlines calibration routines and spare-part management: a standard probe helps to harmonise inspection procedures across multiple stations. The product’s precise diameter and tolerance reduce the need for bespoke adjustments and support consistent audit traces when combined with established measuring processes. For teams seeking reliable reference components, the probe represents a low-complexity solution that directly contributes to stable quality output. For specification support or to align the probe with existing gauges, contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.876 GTIN: 4061905063046 eCl@ss: 21170231 Facts Diameter: 8.76 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.028 kg Special features Single test pin design Material: special steel Workshop specification Category: gauge pins FAQ What tolerance does the gauge pin offer? The gauge pin is manufactured to a tolerance of ±0.001 mm, ensuring high-precision reference measurements for inspection tasks. Which materials is the pin suited for measuring or checking? As a dimensional reference, the pin is used to verify component fits and clearances; it is compatible with standard production materials where a fixed-diameter reference is required. Can the pin be used in gauge fixtures and comparators? Yes, the 50 mm length and defined diameter make the probe suitable for installation in fixtures, manual gauges and comparator setups. What material is the pin made from? The test pin is produced from special steel, chosen for durability and surface stability during repeated inspection cycles. How is the product identified for reordering? Reorder using SKU M323.876 or GTIN 4061905063046 to ensure the same specification and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.77mm Gauge Pin, ±0.001mm, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of the combination of industrial‑grade precision, robust special steel construction and a workshop‑ready design for reliable end‑measure checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.877 — 8.77 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The Gauge pin M323.877 serves as a high‑precision test pin for end‑measurement and plug checks in workshop and inspection environments Precision tolerance ±0.001 mm Diameter 8.77 mm nominal 50 mm length for standard fixtures Special steel workshop execution Accurate fits that reduce rework and rejects A gauge pin with a ±0.001 mm tolerance delivers measurable advantages in assembly and quality control: the narrow tolerance limits ensure consistent fits for shafts, bores and alignment pins, reducing the need for corrective machining. The 8.77 mm nominal diameter is manufactured to tight roundness and size control, which translates into repeatable mating behaviour during trial assembly. This level of precision is especially valuable when final dimensions determine part function rather than appearance, so production flow benefits from fewer stoppages and a lower scrap rate. Robust construction for everyday workshop use Built in a special steel formulation, the test pin balances wear resistance with stable dimensional integrity. A shaft 50 mm long and a net weight of approximately 0.028 kg make the component easy to handle while remaining rigid in use; the mass and length are matched to typical fixture geometries. The workshop execution prioritises durability, and the item is supplied in a protective transport case to prevent handling damage during storage and movement. These features extend service life and reduce downtime for replacement. Practical application and inspection guidance Designed for end‑measure tasks, the gauge pin functions as a reference for bore checking, plug gauging and calibration set ups. Traceable identification via SKU M323.877 and GTIN helps maintain inventory and audit trails in quality management systems. In inspection routines, the test pin minimises operator variability by offering a fixed, certified diameter for quick go/no‑go assessments. For workshop procurement the combination of compact dimensions and high tolerance makes this component suitable for precision fitting, alignment checks and sample control during incoming inspection. Contact Metav Werkzeuge for tailored advice on integrating Metav IndustryLine gauge pins into inspection processes — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.877 GTIN: 4061905063053 Manufacturer: Metav IndustryLine Core technical data Diameter: 8.77 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.028 kg Special features Material: special steel Workshop execution Supplied in transport case Category: Gauge pins (Messstifte) Accuracy: ±0.001 mm FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.877 is specified to ±0.001 mm, providing very high dimensional accuracy for end‑measure and plug checks. Which materials is the pin made from and how durable is it? Manufactured from special steel, the pin combines hardness and wear resistance appropriate for repeated workshop use and inspection cycles. Is the pin suitable for use in standard fixture setups? Yes, the 50 mm length and nominal diameter of 8.77 mm make this test pin compatible with common fixtures and alignment jigs used in machining and assembly. How is the item identified for inventory and traceability? The product is listed under SKU M323.877 and GTIN 4061905063053, allowing straightforward tracking within procurement and quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com