Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M92x1.5 Thread Go/No-Go Ring Gauge Metric Fine Pitch Right-Hand With Calibration Certificate, DIN 13 6g - Metav IndustryLine
Benefit from a straightforward quality control tool that pairs DIN 13 conformity with hardened gauge steel and an included calibration certificate to prevent oversized internal threads and reduce production rework. Order the gauge directly via Metav Werkzeuge or consult with the specialists if clarification is needed. No‑go thread ring gauge M92 x 1.5 for metric ISO fine thread, right‑hand (Metav IndustryLine) The No‑go thread ring gauge M92 x 1.5 is a right‑hand metric ISO fine‑thread gauge designed for pass/fail inspection in production and incoming quality control. No‑go gauge for M92 x 1.5 right‑hand threads Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6g Supplied with calibration certificate Ensure thread conformity at the first inspection gate The primary role of this no‑go gauge is to confirm that internal threads do not exceed maximum material limits. Used at the first inspection gate, the ring provides an immediate pass/fail decision: a correct fit indicates acceptable sizing, while a tight or non‑fitting condition prevents out‑of‑tolerance parts entering assembly. Built for repetitive use, the gauge’s hardened gauge steel construction resists wear and preserves the defined limit dimensions, supporting consistent production flow and reducing downstream rework and scrap. Robust standards and repeatable accuracy for production environments Manufactured to DIN 13 with a 6g tolerance class, this type of gauge matches established ISO metric fine‑thread specifications and is suitable for routine shop‑floor inspection. The tolerance class indicates the thread position and clearance; in practice, the 6g setting is a standard acceptance criterion for general engineering applications where reproducible engagement and safety margins are required. The gauge’s right‑hand geometry and the nominal size M92 x 1.5 are suited to larger fine‑thread components commonly encountered in heavy‑duty assemblies and specialised fittings. Traceable calibration and documentation for audit readiness Delivered with a calibration certificate, the ring gauge arrives ready for inclusion in quality records and audit trails. The accompanying documentation confirms dimensional checks and provides traceable proof that the instrument met its specification at the time of delivery. For procurement and quality departments, this removes an additional administrative step and supports conformity reports. Supplied under the Metav IndustryLine banner, the gauge integrates the brand’s emphasis on accessible precision and reliable supply from the Emmerich quality hub. To secure production‑ready thread inspection tools, contact Metav Werkzeuge to request the Metav IndustryLine no‑go thread ring gauge M92 x 1.5 with calibration certificate and delivery from the Emmerich quality centre Technical data Article number: M315.892.6 GTIN: 4054469152943 Size: M92 x 1,5 Material: Hardened gauge steel Norm: DIN 13, 6g Weight: 2 kg Tariff number: 90173000 Facts Thread type: Metric ISO fine thread Handing: Right‑hand Tolerance class: 6g Category: Ring gauge (no‑go) Special features No‑go (Ausschuss) ring gauge function Supplied with calibration certificate Intended for production and incoming inspection Durable, hardened gauge steel construction FAQ What is the purpose of a no‑go thread ring gauge? A no‑go thread ring gauge provides a quick pass/fail check to ensure internal threads do not exceed maximum material limits; the Metav IndustryLine no‑go ring gauge M92 x 1.5 is used to stop oversized threads from progressing into assembly. Is the gauge suitable for heavy‑duty production use? Yes. The hardened gauge steel construction and compliance with DIN 13 (6g) make this ring gauge appropriate for repeated shop‑floor inspections in industrial settings. Does the product include calibration documentation? Yes. The ring gauge is supplied with a calibration certificate, providing traceable evidence of conformance at the time of shipment for quality records. Can this gauge be used for left‑hand threads? No. This specific item is a right‑hand metric ISO fine‑thread no‑go gauge; left‑hand versions must be ordered separately if required. What identifying information should be quoted when ordering? Please refer to the Metav IndustryLine product identifier M315.892.6 (SKU M315.892.6) and the size designation M92 x 1.5 when requesting this ring gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M92×1.5 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
The hardened construction and conformity to DIN 13, 6H deliver reliable reject detection for precision thread control; supplied with a calibration certificate for traceable inspection records. Order the no-go plug gauge directly via Metav Werkzeuge or consult the technical team for application support. No-go thread plug gauge M92 x 1.5 — metric ISO fine thread, right-hand (Metav IndustryLine) A No-go thread plug gauge M92 x 1.5 for fast, repeatable verification of metric ISO fine threads in production and inspection environments No-go functionality for reject detection Hardened gauge steel for long service life Supplied with calibration certificate Conforms to DIN 13, tolerance 6H Prevent out-of-tolerance production with clear go/no-go control A dedicated no-go plug gauge is the most direct way to prevent the onward processing of incorrectly formed threads. The M92 x 1.5 dimension and right-hand configuration make this tool suitable for large-scale or specialised components where fine-pitch metric threads are used. Because the gauge is made from hardened gauge steel, wear resistance is high; this preserves the critical measuring profile and reduces the frequency of replacements, which in turn supports uninterrupted production flow and predictable quality control. Traceable calibration for quality assurance and audit readiness Delivered with a calibration certificate, the gauge provides documented traceability for internal quality systems and third‑party audits. The certificate confirms the inspection state at the time of delivery and allows the gauge to be included immediately in sampling plans or incoming inspection procedures. Combined with the normative reference DIN 13, 6H, the supplied documentation simplifies conformity checks and reduces time spent reconciling measurement results with specification limits. Robust design for workshop and inspection use Constructed from hardened gauge steel and finished to the tolerance class required by thread standards, the gauge resists abrasion in routine use. The compact, machined profile ensures secure seating in the thread during verification, while the right‑hand thread format matches standard production threads. As a purpose-built rejection verifier, the gauge helps to minimise rework and scrap by providing an unequivocal pass/fail indication that is simple to implement in automated or manual inspection stations. Choose Metav IndustryLine’s calibrated no-go plug gauge M92 x 1.5 for dependable thread control and liaise with Metav Werkzeuge for specification matching or ordering assistance Technical data Article number: M315.692.6 GTIN: 4054469152462 Label: No-go thread plug gauge M92 x 1.5 for metric ISO fine thread, right-hand Facts Size: M92 x 1.5 Weight: 2 kg Tariff number: 90173000 Special features Material: hardened gauge steel Standard: DIN 13, tolerance class 6H Hand: right-hand thread Delivered with calibration certificate Intended use: reject/no-go verification in thread inspection Manufacturer: Metav IndustryLine FAQ What is the primary purpose of this gauge? The no-go plug gauge is designed to identify out-of-tolerance metric ISO fine threads; the No-go thread plug gauge M92 x 1.5 prevents the acceptance of undersized or incorrectly formed threads during inspection. Does the gauge arrive calibrated? Yes, the tool is supplied with a calibration certificate, confirming the measured state at delivery and allowing immediate inclusion in quality procedures. Which standard does the gauge conform to? The gauge is manufactured to DIN 13 with a tolerance class of 6H, matching common specifications for metric fine threads. Is this suitable for automated inspection cells? The hardened construction and unambiguous go/no-go assessment make the gauge appropriate for both manual checks and integration into automated sampling routines; the M92 x 1.5 size and right-hand form should be verified against the cell’s handling limits. How is wear resistance assured? Wear resistance is achieved through the use of hardened gauge steel and precision machining to maintain the measuring profile over many cycles, thereby extending service life and stabilising inspection results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M92×1.5 Thread Go Plug Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened, calibrated inspection tool that delivers repeatable thread verification for ISO fine threads; the combination of robust gauge steel construction and a supplied calibration certificate keeps production checks reliable and auditable. Order the plug gauge directly via Metav Werkzeuge or contact our consultants for application advice. Thread plug gauge GUT M92 x 1.5 (metric ISO fine thread, right-hand) – Metav IndustryLine The Thread plug gauge GUT M92 x 1.5 is a hardened, calibrated go-style plug for quick verification of metric ISO fine internal threads in production and inspection environments Calibrated delivery with certificate Hardened gauge steel construction M92 x 1.5 metric ISO fine thread Conforms to DIN 13 tolerance 6H Reliable verification that reduces rework and downtime A purpose-built go gauge such as this provides an unambiguous check of internal thread acceptance: the M92 x 1.5 dimension ensures compatibility with metric ISO fine threads while the DIN 13 / 6H tolerance basis aligns the inspection with common engineering standards. The hardened gauge steel body resists wear, meaning that the acceptance boundary remains stable across repeated use. The supplied calibration certificate documents conformity at delivery, supporting traceability in quality records and simplifying audit routines. Robust design for repetitive workshop use Constructed from hardened gauge steel and finished for endurance, this plug gauge is sized and weighted for practical handling in workshop and inspection stations. The right-hand orientation and compact profile make it straightforward to use in benches or fixtures, while the material choice prioritises dimensional stability under normal operating conditions. Using a dedicated, calibrated plug gauge shortens inspection time compared with comparator methods and reduces subjective judgement, which in turn raises throughput and stabilises quality control processes. Traceability and integration into quality systems The plug gauge is delivered with a calibration attestation, enabling immediate integration into inspection plans and measurement logs. Identified by SKU M315.592.6 and GTIN for inventory control, the tool supports reproducible acceptance criteria across shifts and sites. Where production documentation requires recorded evidence of measurement tools, this gauge offers a documented baseline that maintenance and quality teams can rely on. For specialist applications or batch release routines, the gauge serves as a fast, standards-based gatekeeper that prevents non-conforming parts from progressing. For calibrated thread inspection tools from Metav IndustryLine, contact Metav Werkzeuge for purchase and technical advice from our Emmerich team Technical data Article number: M315.592.6 GTIN: 4054469152226 Customs tariff number: 90173000 Numbers / core technical data Thread size: M92 x 1.5 Weight: 2 kg Standard: DIN 13, tolerance 6H Special features Material: gauge steel, hardened Right-hand thread orientation Type: Go (GUT) thread plug gauge Supplied with calibration certificate Manufacturer: Metav IndustryLine FAQ What does "GUT" signify on this plug gauge? GUT identifies the tool as a go-style thread plug gauge; it verifies that internal threads meet the lower limit of allowable tolerance without indicating no-go conditions. Is a calibration certificate included with the gauge? Yes, the plug gauge is delivered with a calibration certificate, allowing immediate incorporation into quality documentation for SKU M315.592.6. Which standard and tolerance does the gauge follow? The gauge conforms to DIN 13 with a tolerance designation of 6H, suitable for metric ISO fine threads specified as M92 x 1.5. Can the gauge be used in production as a pass/fail control? Yes, as a hardened go plug gauge it provides an objective pass/fail check that speeds up routine inspections and reduces subjective interpretation. How should the gauge be stored to maintain accuracy? Store the gauge clean, dry and protected from impact; regular inspections and adherence to the supplied calibration interval will preserve its measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x1.5 Go/No-Go Thread Plug Gauge For ISO Metric Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H - Metav IndustryLine
Take advantage of a hardened gauge steel construction combined with conformity to DIN 13 (6H) and a supplied calibration certificate to ensure reproducible pass/fail decisions at the inspection station. Order the M95 x 1.5 no-go thread plug gauge directly via Metav Werkzeuge or consult our specialists for application-specific advice. Thread plug gauge (no-go) M95 x 1.5 — hardened gauge steel, DIN 13 (6H) — Metav IndustryLine The Thread plug gauge (no-go) M95 x 1.5 is a precision inspection tool designed to verify metric ISO fine internal threads with a right-hand lead, providing fast go/no-go assessment in production and quality control. Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13 tolerance class 6H Right-hand metric fine thread M95 x 1.5 Reliable inspection results through standardised tolerances This no-go plug gauge is manufactured from hardened gauge steel to resist wear and preserve the inspection limit over repeated use. Built to DIN 13 with a 6H tolerance class, it offers a clear, standards‑based reference for thread acceptance. The hardenable material and normative design reduce uncertainty in routine checks and help maintain consistent quality across batch inspections. Supplied with a calibration certificate, the gauge supports traceability and documentation for quality management systems. Fast pass/fail control to keep production flowing Used as a straightforward go/no-go tool, the no-go plug performs immediate checks on internal threads: the instrument is intended to confirm that the internal thread does not exceed the permitted maximum material condition. This method shortens inspection time and enables rapid sorting of conforming and non-conforming parts, which improves throughput and reduces downstream rework. The compact form factor and ergonomic handling make the gauge a practical choice for the shop floor and the inspection bench alike. Durability, traceability and workshop compatibility Designed for workshop and inspection environments, the gauge’s M95 x 1.5 geometry and right-hand configuration match common metric ISO fine-thread applications in mechanical assemblies. The hardened construction provides longevity under industrial use, while the included calibration certificate documents the tool’s status at delivery. This combination of durability and traceability supports regulatory compliance and internal quality protocols, giving procurement and QA teams a reliable reference for acceptance criteria and audits. For documented quality control and reliable thread verification, request the Metav IndustryLine M95 x 1.5 no-go thread plug gauge from Metav Werkzeuge or contact our technical consultants in Emmerich for tailored guidance Technical data SKU: M315.695.6 GTIN: 4054469152479 Size: M95 x 1.5 Thread type: Metric ISO fine, right-hand Material: Gauge steel, hardened Standard: DIN 13, 6H Weight: 2 kg Customs tariff number: 90173000 Supplied with calibration certificate Facts Weight: 2 kg Size designation: M95 x 1.5 GTIN: 4054469152479 Customs tariff number: 90173000 Special features Type: No-go thread plug gauge (reject) Material: Hardened gauge steel Standard conformity: DIN 13, tolerance class 6H Right-hand thread orientation Calibration certificate included FAQ What does the no-go plug gauge check for? The no-go plug gauge is used to verify that an internal metric ISO fine thread does not exceed the maximum permissible size; if the no-go enters fully, the thread is out of tolerance and must be rejected. Is a calibration document supplied with the gauge? Yes, the Metav IndustryLine M95 x 1.5 no-go thread plug gauge is delivered with a calibration certificate that documents the instrument’s status at shipment. Which tolerance standard does this gauge follow? This plug gauge conforms to DIN 13 with the 6H internal thread tolerance class, providing a standards-based reference for inspection procedures. Can this gauge be used on left-hand threads? No; the gauge supplied is configured for right-hand metric ISO fine threads and is marked accordingly. Is the material suitable for heavy use in production? The gauge is made from hardened gauge steel, chosen for wear resistance and durability under frequent inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x1.5 Thread Go Ring For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel DIN 13 6g, Calibrated - Metav IndustryLine
High-precision verification for M95 × 1.5 metric fine threads is delivered by the hardened gauge steel construction and conformity to DIN 13, 6g; the ring is supplied as a Go gauge and includes a calibration certificate for traceable acceptance testing—order directly via Metav Werkzeuge or consult our specialists for application advice. Thread Ring Gauge GUT M95 × 1.5 — hardened gauge steel, DIN 13 by Metav IndustryLine The Thread Ring Gauge GUT M95 × 1.5 is a hardened verification gauge for checking metric ISO fine external threads, designed for in‑process inspection and incoming goods control in industrial workshops. Hardened gauge steel construction Calibrated, certificate included Conforms to DIN 13, tolerance 6g Designed for M95 × 1.5 metric fine thread Reliable inspection that safeguards production quality The ring gauge provides a straightforward, repeatable means of confirming external thread form and basic fit class. Made from hardened gauge steel, the item resists wear and preserves its reference diameters over many cycles, reducing rework and minimising downtime. The designation as a Go gauge indicates acceptance criteria for production parts; a passed check confirms that threads meet the specified dimensional envelope according to DIN 13, 6g, supporting documented quality gates and batch release procedures. The hardened construction thus delivers long‑term dimensional stability and consistent inspection results. Durable design and conformity for standardised processes Material choice and standard conformity translate directly into process advantages: the robust gauge steel body offers mechanical resilience while the adherence to DIN 13 ensures compatibility with commonly specified metric ISO fine thread tolerances. Supplied with a calibration certificate, the gauge enables traceable measurement routines and simplifies audits by quality managers. Because the gauge is a fixed‑limit reference, it eliminates subjective judgement during visual checks and speeds up go/no‑go decisions on the shop floor, improving throughput without compromising measurement certainty. Traceability and integration into inspection workflows The calibrated ring arrives ready for use in incoming inspection benches or final control stations and can be recorded as a controlled inspection tool in quality documentation. The included certificate supports calibration records and eases compliance with internal control plans. Lightweight handling and compact form factor make the gauge suitable for portable checks in large assemblies or at workstations, while the Go gauge function provides immediate pass/fail feedback without auxiliary equipment. For specialised test plans, Metav Werkzeuge can advise on complementary standards or supplementary gauges to complete a measurement set. Contact Metav Werkzeuge for certified gauges and expert application advice; request the Metav IndustryLine Thread Ring Gauge GUT M95 × 1.5 with calibration certificate for reliable, traceable thread verification Technical Data SKU: M315.795.6 GTIN: 4054469152714 Designation: Thread Ring Gauge GUT M95 × 1.5 Weight: 2 kg Facts Thread size: M95 × 1.5 Tolerance/grade: DIN 13, 6g Tariff number: 90173000 Special features Calibrated — calibration certificate included Function: Go gauge for external metric ISO fine threads Material: hardened gauge steel Manufacturer: Metav IndustryLine FAQ What is the intended use of this ring gauge? The Thread Ring Gauge GUT M95 × 1.5 is intended for verification of metric ISO fine external threads as a Go gauge in production, inspection and incoming goods checks. Is a calibration certificate supplied with the gauge? Yes, the gauge is supplied calibrated and includes a calibration certificate to document traceability and support quality records. Which tolerance and standard does the gauge comply with? The gauge complies with DIN 13 and is manufactured to the 6g tolerance grade for metric ISO fine threads. What material is the gauge made from and how does that benefit daily use? The gauge is manufactured from hardened gauge steel, which provides wear resistance and dimensional stability for frequent shop‑floor checks. Can this gauge be used for pass/fail checks without additional instruments? Yes, as a Go gauge it provides immediate pass/fail verification of external thread acceptance without the need for measurement devices. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x1.5 Thread Go Ring Metric ISO Fine Right-Hand, Hardened Gauge Steel, Calibrated Certificate, DIN 13 6g - Metav IndustryLine
Take advantage of a precise, hardened gauge built to DIN 13 tolerance and supplied with a calibration certificate; the combination of robust construction and traceable calibration supports reliable acceptance and rejection of metric fine threads in series production. Order the ring directly via Metav Werkzeuge or consult the team for specification guidance. Thread Ring Gauge NO‑GO M95 x 1.5 — Metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread Ring Gauge NO‑GO M95 x 1.5 is a hardened ring gauge for rapid verification of right‑hand metric ISO fine threads in production and incoming inspection. Hardened gauge steel, DIN 13, 6g Right‑hand M95 x 1.5 metric fine thread No‑go ring for thread rejection checks Supplied with calibration certificate Fast, unambiguous thread rejection for quality control A dedicated no‑go ring shortens inspection cycles by offering an immediate, objective check against the maximum material condition of a threaded part. Manufactured from hardened gauge steel to DIN 13, 6g, the component gives a clear binary result: parts that enter the ring are rejected, parts that do not pass are acceptable. This direct method reduces measurement interpretation, lowers cycle time on the inspection bench and supports tighter process control in repetitive production environments. The ring’s geometry is tailored for metric ISO fine thread profiles and right‑hand threading, ensuring compatibility with standardised thread forms. Traceability and process reliability through certified calibration Supplied with a calibration certificate, the gauge integrates into documented quality systems and audit trails without delay. Traceable calibration lets the workshop demonstrate conformity during supplier audits and internal checks; the certificate served with the gauge evidences the measurement status at delivery. Using a standardised, certified ring as the go/no‑go reference improves reproducibility across shifts and operators and simplifies quality records. The direct nature of the check also minimises dependence on subjective measurement techniques, supporting predictable scrap rates and leaner inspection logistics. Robust design for demanding workshop use Constructed from hardened gauge steel, the ring offers wear resistance and dimensional stability under frequent mechanical engagement. At roughly 2 kg, the gauge balances mass for stable handling while remaining manageable at the inspection station. The right‑hand M95 x 1.5 profile is suited to serial checks on external threads in machining, assembly and incoming‑goods inspection. The compact form factor enables straightforward fixture mounting or bench use and resists deformation that would otherwise compromise repeatability. For workshops seeking a dependable rejection standard, this ring provides a practical, long‑lasting solution. Request the Metav IndustryLine NO‑GO thread ring through Metav Werkzeuge for reliable, certified thread control; Metav Werkzeuge in Emmerich can advise on integration and supply—contact info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.895.6 GTIN: 4054469152950 Weight: 2 kg Material: hardened gauge steel Designation: M95 x 1.5 Standard: DIN 13, 6g Numbers / Core technical data Thread size: M95 × 1.5 Hand: right‑hand thread Tolerance class: 6g (per DIN 13) Mass (approx.): 2 kg Special features / Versions No‑go (reject) thread ring Supplied with calibration certificate Suitable for metric ISO fine threads Category: gauges / thread ring gauges FAQ What is the purpose of a no‑go thread ring? A no‑go thread ring provides a rapid, go/no‑go pass for external threads; the Thread Ring Gauge NO‑GO M95 x 1.5 confirms whether a right‑hand metric ISO fine thread exceeds the maximum material condition. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate; the documentation accompanies the Metav IndustryLine ring and supports traceability in quality systems. Which standard does this thread ring comply with? The ring is manufactured to DIN 13 with a 6g tolerance class suitable for metric ISO fine thread inspection. Can this gauge be used for left‑hand threads? No, this specific ring is machined for right‑hand threads; left‑hand checks require the corresponding left‑hand gauge version. What materials and applications is the ring intended for? The ring is made from hardened gauge steel and is intended for serial inspection of external metric fine threads in machining, assembly and incoming‑goods control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x2 Thread Gauge Metric ISO Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated - Metav IndustryLine
Take advantage of rapid, shop‑floor thread checks combined with durable construction and traceable calibration for reliable production control; order the gauge directly via Metav Werkzeuge or consult the sales team for application advice. Go thread ring gauge GUT M95 x 2.0 — hardened gauge steel, DIN 13 (6g) A Go thread ring gauge GUT M95 x 2.0 designed for quick verification of right‑hand metric ISO fine threads in production and inspection environments Hardened gauge steel construction Conforms to DIN 13, tolerance class 6g Includes calibration certificate Right‑hand metric fine thread M95 × 2.0 Rapid, repeatable thread inspection for production control The M95 x 2.0 ring is engineered as a go ring gauge to provide an immediate pass indication for external threads, enabling fast acceptance tests during assembly and final inspection. Employed at incoming inspection or on the production line, the gauge reduces measurement time and standardises checks across operators, which minimises process interruptions and supports consistent assembly quality. The geometry matches the metric ISO fine thread form to verify dimensional conformity in a single, decisive action. Durable construction with traceable accuracy Manufactured from hardened gauge steel, the ring is built for extended service in industrial environments where wear resistance and dimensional stability are essential. Delivery includes a calibration certificate, ensuring traceability of results and documented compliance for internal quality records. The robust design withstands routine handling while maintaining the precision required for thread conformity checks, contributing to fewer reworks and greater confidence in batch releases. Application scope and technical conformity explained Specified to DIN 13 with tolerance class 6g, the gauge is intended for verifying right‑hand metric ISO fine threads where this tolerance system applies. Its role is limited to go/no‑go acceptance: the part must fit the go ring to pass the check. The product is supplied with SKU M315.795.7 for easy inventory control and is suitable for production, quality control labs and maintenance departments requiring straightforward, traceable thread inspection tools. Contact Metav Werkzeuge for application support or to request the Metav IndustryLine Go gauge directly from Emmerich; telephone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M315.795.7 GTIN: 4054469153759 Size: M95 x 2.0 Material: hardened gauge steel Norm: DIN 13, 6g Weight: 2 kg Tariff number: 90173000 Facts Thread size M95 × 2.0 Weight 2 kg GTIN 4054469153759 SKU M315.795.7 Special features Calibration certificate included Go ring gauge for right‑hand threads Metric ISO fine thread verification Suitable for production and inspection use FAQ What is a go ring gauge and how is it used? A go ring gauge is a precision gauge that confirms an external thread fits within specified limits; the Go thread ring gauge GUT M95 x 2.0 is used to perform immediate pass checks on threaded components during inspection. Which tolerance class does this gauge check? The gauge verifies conformity to tolerance class 6g as defined in DIN 13, which specifies the dimensional limits for external threads in metric ISO fine thread series. Is a calibration certificate supplied with the gauge? Yes, the gauge is delivered with a calibration certificate, providing documented traceability suitable for quality records and audit requirements. Can this gauge be used for left‑hand threads? No, the device is designed for right‑hand threads only and will not be suitable for left‑hand thread verification. What material is the gauge made from and is it shop‑floor durable? The ring is manufactured from hardened gauge steel, offering high wear resistance and stability for routine use in production and inspection environments. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x2 Thread Go Gauge For Metrical ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6H, Calibrated - Metav IndustryLine
Take advantage of a calibrated Go plug gauge in hardened gauge steel for reliable thread verification; the M95×2 size and DIN 13 (6H) tolerance ensure conformity with metric ISO fine‑thread specifications. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge GUT M95×2.0 — Go gauge for right‑hand metric ISO fine threads (Metav IndustryLine) Thread plug gauge GUT M95×2.0 for quick verification of internal threads to DIN 13, tolerance class 6H; designed as a Go (GUT) plug for right‑hand metric fine threads in production and inspection environments Calibrated with certificate DIN 13 tolerance class 6H Hardened gauge steel construction Go plug gauge for M95×2 threads Ensure conformity with a certified Go gauge A Go plug gauge in M95×2 checks internal threads quickly and unambiguously: if the gauge enters, the thread meets the specified limit. Made from hardened gauge steel, the tool resists wear and preserves the measured reference geometry over repeated use, reducing the need for frequent replacements. Supplied with a calibration certificate, the gauge supports traceable inspection records and simplifies acceptance checks in production control. Repeatable inspection that keeps production running Built to the DIN 13 (6H) standard, this right‑hand plug gauge provides a clear go/no‑go decision without interpretation. The single‑feature Go design accelerates routine checks at final inspection or on the shop floor, cutting cycle time and lowering the risk of defective assemblies. Consistent fit behaviour ensures fewer stoppages for rework and contributes to higher first‑pass yield in serial production. Traceability and workshop integration for dependable results The compact, robust design makes the gauge easy to store alongside inspection fixtures and reference tools; the included calibration documentation supports quality audits and supplier qualification. As part of a measured quality system, the gauge helps to document conformity across batches and provides a baseline for corrective action if deviations occur. For workshops aiming to standardise inspection hardware, this plug gauge forms a simple, reliable element of the metrology toolkit. For precise thread inspection and documented traceability, request the M95×2 Go plug gauge from Metav Werkzeuge or ask our specialists for tailored application advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.595.7 GTIN: 4054469153162 SKU: M315.595.7 Facts Thread size: M95×2 Tolerance class: 6H Weight: 2 kg Tariff number: 90173000 Special features Go (GUT) plug gauge, right‑hand thread Material: hardened gauge steel Standard: DIN 13 Supplied with calibration certificate Category: gauges / thread gauges FAQ What does "GUT" mean on this plug gauge? "GUT" denotes the Go function: the Go plug gauge M95×2.0 is intended to enter a compliant internal thread; successful entry indicates the thread meets the minimum functional size. Is a calibration certificate included with the gauge? Yes, the Metav IndustryLine thread plug gauge M95×2 (M315.595.7) is supplied with a calibration certificate to document traceability for quality records. Which standard does the gauge follow? The gauge conforms to DIN 13, tolerance class 6H, which defines the form and limits for metric internal threads. What is the material and why does it matter? The plug gauge is manufactured from hardened gauge steel; this material offers wear resistance and dimensional stability for repeatable inspections. Can this gauge be used for left‑hand threads? No, this item is specified for right‑hand metric fine threads; left‑hand versions must be ordered separately if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x2 Thread Go/No-Go Plug Gauge Metric ISO Fine Thread Right-Hand Hardened Gauge, DIN 13 6H, Calibrated - Metav IndustryLine
Take advantage of a hardened gauge steel design and conformity to DIN 13, 6H for reliable rejection testing of metric fine threads; the tool is supplied with a calibration certificate to support traceability and quality control. Order directly via Metav Werkzeuge or request advice from our consultants. Thread plug gauge REJECT M95 x 2.0 — right‑hand no‑go for metric ISO fine threads (Metav IndustryLine) Thread plug gauge REJECT M95 x 2.0 is a right‑hand no‑go verification gauge designed for production and incoming‑inspection of metric ISO fine threads, used where clear go/no‑go decisions are required No‑go gauge for M95 x 2.0 metric fine threads Hardened gauge steel construction Calibrated with certificate included Consistent rejection criteria for fast quality decisions A dedicated no‑go plug gauge provides instant, unambiguous assessment of thread quality: if the gauge enters, the thread is out of tolerance and must be rejected or reworked. This clear pass/fail method reduces subjective judgement at the workstation and speeds up inspection cycles. Built to conform with DIN 13, 6H, the gauge supports standardised acceptance criteria and helps to avoid downstream assembly issues by catching out‑of‑spec threads early in the process. Robust construction minimises wear and service intervals Manufactured from hardened gauge steel, the tool resists abrasion and maintains its functional form under repeated use. The solid construction ensures stability when applied in busy production environments and reduces the frequency of replacement compared with softer checking methods. Consistent dimensional stability of the gauge translates directly into fewer false rejections and lower rework rates, preserving production throughput and lowering inspection costs over the tool’s service life. Traceability and quality documentation for audit readiness The gauge is supplied with a calibration certificate, giving documented evidence of measurement status at the time of delivery and supporting traceability in internal quality systems. This documentation is valuable for audit trails and supplier qualification. Using a certified no‑go gauge from a recognised range ensures that inspection steps are defensible and align with established quality procedures, strengthening confidence in acceptance decisions and reducing liability from undetected defects. For ordering or technical advice on Metav IndustryLine thread plug gauges, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific inspection routines Technical data Article number: M315.695.7 GTIN: 4054469153544 Weight: 2 kg Tariff number: 90173000 Facts Thread size: M95 x 2.0 Standard: DIN 13, 6H Right‑hand thread Category: Thread plug gauge Special features Material: hardened gauge steel Function: no‑go (reject) plug gauge Supply: calibration certificate included Intended use: verification of metric ISO fine threads FAQ What does the "no‑go" function mean for inspection? A no‑go plug gauge is a reject indicator: if the gauge enters the thread, the part fails the check. The Thread plug gauge REJECT M95 x 2.0 is specifically for identifying out‑of‑tolerance metric ISO fine threads. Is the gauge delivered ready for use with documentation? Yes, the gauge is supplied with a calibration certificate so that the inspection status is documented at delivery and can be referenced in quality records. Can this gauge be used on both right‑ and left‑hand threads? This specific item is a right‑hand no‑go plug gauge; left‑hand versions require a different gauge design. How does the material affect service life? Made from hardened gauge steel, the plug gauge offers increased wear resistance, which extends interval between replacements and keeps rejection criteria stable over time. Is this gauge suitable for final assembly checks? The gauge is intended for production and incoming inspection to prevent faulty threads reaching assembly; its clear go/no‑go function supports quick decisions on the shop floor. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x2 Thread Go/No-Go Ring Gauge Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Data inconsistency detected: the product is recorded both as rejected and as acceptable in the source data. This discrepancy in the recorded status may lead to confusion or errors in subsequent processes. Please verify and correct the product status in the source information to ensure accuracy and consistency. Resolving this issue promptly is essential before a full product description can be generated, as the conflicting data prevents the creation of a reliable and accurate description. Accurate source data is crucial for maintaining the integrity of product records and ensuring smooth operations across related systems and workflows.
M95x3 Thread Gauge Go Right-Handed For Metric ISO Fine Thread, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, conformity to DIN 13, 6g and an included calibration certificate to secure reproducible reject detection in serial production. Order the gauge directly via Metav Werkzeuge or consult their specialists for integration into quality control routines. Thread ring gauge No‑go M95×3.0 — Right‑hand metric ISO fine‑thread, hardened gauge steel The Thread ring gauge No‑go M95×3.0 is a right‑hand inspection gauge for metric ISO fine threads, designed for rapid rejection checks and inline quality control in industrial metrology. No‑go thread ring gauge for M95×3 Hardened gauge steel construction Conforms to DIN 13, 6g tolerance Supplied with calibration certificate Fast and unambiguous reject detection for production lines A dedicated No‑go ring gauge provides a binary, easily interpretable check that shortens inspection cycles and reduces subjective judgement. The ring is produced to DIN 13, 6g, so it represents the standardised limit for an acceptable internal thread; if the ring does not pass, the component is classified as reject. This method avoids time‑consuming measurements where only go/no‑go decisions are required and integrates smoothly into both manual and automated inspection stations. Durable design that withstands workshop use Manufactured from hardened gauge steel, the gauge tolerates regular handling and resists wear that would otherwise erode accuracy. The robust construction and the compact M95×3.0 form factor make it suitable for bench checks and transfer to production points without additional protection. The solid build ensures long service life and consistent thread checking, lowering rework rates and maintaining a steady inspection throughput under industrial conditions. Traceable calibration for quality assurance and documentation Delivered with a calibration certificate, the gauge supports quality management systems and audit requirements by providing documented traceability of measurement status. The certificate confirms that the instrument was checked against defined standards before dispatch, simplifying acceptance in regulated environments and ensuring comparability across inspection points. Integration into documented control plans becomes straightforward when inspection tools carry verifiable calibration evidence. Specify the Metav IndustryLine No‑go thread ring gauge M95×3.0 for immediate enhancement of thread inspection reliability; contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M315.895.8 GTIN: 4054469154725 Designation: No‑go thread ring gauge M95×3.0 Facts Size: M95×3.0 Weight: 2 kg Tariff code: 90173000 Standard: DIN 13, 6g Special features Right‑hand metric ISO fine thread No‑go (reject) ring gauge function Hardened gauge steel material Supplied with calibration certificate FAQ What is the primary use of this ring gauge? The no‑go ring gauge is used for rapid accept/reject checks on internal threads; the Metav IndustryLine No‑go thread ring gauge M95×3.0 verifies whether a threaded part exceeds tolerance and must be classified as reject. Does the gauge comply with recognised standards? Yes, the ring conforms to DIN 13, 6g tolerances, offering standardised limits for metric ISO fine threads to ensure consistent inspection criteria. Is a calibration certificate included with the gauge? A calibration certificate is supplied with the gauge, providing traceability and documentation for quality systems and audits. Can this gauge be used on both right‑hand and left‑hand threads? This specific item is manufactured for right‑hand metric ISO fine threads; left‑hand applications require a matching left‑hand gauge. What material is the gauge made from and what does that mean for durability? The gauge is made from hardened gauge steel, which ensures resistance to wear and mechanical damage during routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x3 Thread Go Gauge For Metric ISO Fine Thread, Right-Handed, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of robust hardened gauge steel, the DIN 13, 6H tolerance class and the supplied calibration certificate for traceable thread inspection of metric fine threads; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge GUT M95 x 3.0 — metric ISO fine thread, right-hand, hardened gauge steel — Metav IndustryLine Thread plug gauge GUT M95 x 3.0 for quick verification of M95 × 3.0 metric ISO fine threads in production and inspection environments Hardened gauge steel construction DIN 13, 6H tolerance class Supplied with calibration certificate Right-hand M95 x 3.0 metric fine thread Consistent verification for production workflows The plug gauge serves as a compact, no‑nonsense solution for routine thread checks in manufacturing and incoming inspection. Manufactured from hardened gauge steel, the tool retains dimensional stability under repeated handling, reducing the need for frequent replacement. Conformance to DIN 13, 6H ensures that threads meet the common metric ISO fine‑thread specification, which supports interchangeability and reduces assembly rejects. As a precision inspection implement, it delivers fast go/no‑go confirmation and integrates easily into standard quality routines, helping to maintain throughput without sacrificing accuracy. Built to last and easy to incorporate into control plans Robust mechanical design and the hard material choice make the gauge resistant to wear while preserving the critical thread profile. The straightforward geometry of the plug gauge simplifies operator use and speeds up sampling in production lots, contributing to lower process downtime. When used as part of a control plan, the gauge supports repeatable decisions about acceptance or rework, and its clear designation for a right‑hand metric ISO fine thread reduces ambiguity on the shop floor. The compact format and durable finish mean the tool remains serviceable for many inspection cycles, delivering a favourable total cost of ownership for workshop and plant environments. Traceable calibration and integration into quality systems The gauge is supplied with a calibration certificate, providing documented traceability for audit trails and quality records. This facilitates inclusion in inspection logs and supports batch release processes where documented evidence of measurement capability is required. The combination of standard conformity, measurable construction and a supplied certificate enables straightforward integration into existing quality management systems, strengthening supplier confidence and internal quality assurance alike. For traceable and robust thread inspection choose the Metav IndustryLine plug gauge and contact Metav Werkzeuge for ordering or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M315.595.8 GTIN: 4054469154152 Brand: Metav IndustryLine Numbers / Core technical data Weight: 2 kg Thread size: M95 x 3.0 Tariff number: 90173000 Classification: ECLASS 21170228 Special features Material: hardened gauge steel Tolerance / standard: DIN 13, 6H Thread direction: right‑hand Delivered with calibration certificate Intended for metric ISO fine threads FAQ What thread size does this gauge check? The plug gauge is designed specifically for M95 x 3.0 metric ISO fine threads and is marked accordingly for straightforward identification. Is the gauge supplied calibrated? Yes, the gauge is supplied with a calibration certificate, providing traceability and documentation suitable for quality records. Which standard does the gauge conform to? The thread gauge conforms to DIN 13, 6H, which corresponds to the common metric ISO fine‑thread tolerance class used in mechanical engineering. What material is the gauge made from and why does that matter? Manufactured from hardened gauge steel, the gauge offers wear resistance and dimensional stability, which prolongs service life and maintains measurement reliability. Is this a right‑hand or left‑hand thread gauge? This item is specified as a right‑hand thread plug gauge for M95 x 3.0 metric ISO fine threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x3 Thread Go Ring Gauge Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a robust inspection tool that combines a hardened gauge‑steel construction, precise DIN 13, 6g tolerance and a supplied calibration certificate for traceable results; order the part directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge M95×3 (GO) — right‑hand, DIN 13, 6g — Metav IndustryLine The thread ring gauge M95×3 is a right‑hand GO ring designed to verify external metric ISO fine threads in production and inspection environments, providing quick go/no‑go validation for routine quality control. Thread ring gauge M95×3, right‑hand Hardened gauge steel for long service life Conforms to DIN 13, tolerance 6g Supplied with calibration certificate Dependable go/no‑go verification for external threads A ring gauge of this type performs a simple and fast functional test: the external threaded part must enter the ring to pass the GO criterion. Constructed from hardened gauge steel, the component resists wear and preserves nominal dimensions over repeated use, which reduces measurement drift and the need for frequent replacement. The DIN 13 reference and 6g tolerance describe the gauge’s conformity to the common metric fine‑thread standard, making it suitable for consistent checks in metalworking and fastening applications. Traceability and production efficiency through calibrated inspection Supplied with a calibration certificate, the gauge delivers documented traceability for quality management systems and audit processes. Using a dedicated ring for go testing shortens inspection cycles and lowers reject rates by catching out‑of‑tolerance external threads before assembly; this promotes a more efficient workflow and helps to contain production costs. The robust material choice and simple handling mean fewer stoppages for maintenance and an uninterrupted quality routine. Practical application and safe handling in the workshop Intended for routine dimensional control of external metric ISO fine threads, the ring gauge is used directly on finished parts in the workshop or at the measuring bench. The compact, single‑piece design ensures repeatable results with minimal operator training: align the threaded part, attempt engagement with the ring and note the go/no‑go result. For storage, keep the gauge in a dry, clean place to protect the hardened surface and the calibration status; regular re‑calibration maintains confidence in readings across production runs. For guaranteed thread inspection backed by Metav IndustryLine quality, contact Metav Werkzeuge to request this gauge or technical advice tailored to specific thread series and inspection intervals. Technical data Article number: M315.795.8 GTIN: 4054469154534 Customs tariff number: 90173000 Weight: 2 kg Size: M95×3 Standard: DIN 13, 6g Numerical data Thread nominal size: M95×3 Tolerance class: 6g Weight (approx.): 2 kg GTIN numeric: 4054469154534 Material & special features Material: hardened gauge steel Hand: right‑hand thread gauge Supplied with calibration certificate Intended use: inspection of external metric ISO fine threads (GO check) Category: gauges / inspection tools FAQ What is the primary purpose of this ring gauge? The ring gauge is intended for quick go/no‑go verification of external metric ISO fine threads, ensuring threaded parts meet the DIN 13, 6g specification. Is the gauge supplied calibrated? Yes, the gauge is supplied with a calibration certificate confirming its measured state at delivery. Which material is the thread ring made from? The ring is manufactured from hardened gauge steel to provide wear resistance and dimensional stability in routine inspection. Can this gauge be used for left‑hand threads? This particular item is a right‑hand ring gauge and is designed for right‑hand external threads; left‑hand versions must be specified separately. Is the M95×3 ring suitable for production line checks? Yes, the robust design and simple go/no‑go function make it well suited to production and incoming inspection tasks where fast, repeatable results are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x3 Thread Plug Gauge Metric ISO Fine Thread Right-Hand, Calibrated Certificate, DIN 13 6H - Metav IndustryLine
This hardened, right‑hand no‑go thread plug gauge for M95×3 ensures consistent rejection control and conformity with DIN 13 (6H); supplied with a traceable calibration certificate for immediate use in quality inspection. Order the gauge directly via Metav Werkzeuge or contact the consultants for application advice. Gewinde-Lehrdorn AUSSCHUSS M95×3 — no‑go thread plug gauge, hardened gauge steel (Metav IndustryLine) Gewinde-Lehrdorn AUSSCHUSS M95×3 is a no‑go thread plug gauge designed to check the reject limit of metric fine internal threads; right‑hand specification for controlled production environments Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Supplied with calibration certificate No‑go check for M95×3 threads Reliable rejection control that protects production quality The no‑go mandrel is manufactured for precise pass/fail inspections and is particularly effective where a single decisive rejection check avoids downstream rework. Made from hardened gauge steel, the gauge preserves its form under repetitive use and secures dimensional stability. Conformity to DIN 13 with tolerance class 6H provides a recognised reference, allowing straightforward integration into existing quality plans and reducing ambiguity in go/no‑go decisions. Traceability and immediate usability for quality systems Supplied with a calibration certificate, the instrument arrives ready for documented inspection routines and batch release processes. The presence of the calibration paperwork supports quality audits and traceability requirements without additional lead time. Precision machining and hardened finishing lower the need for frequent recalibration, improving uptime and aligning the tool with industry traceability practices for reproducible measurement outcomes. Robust design for shop‑floor handling and repetitive checks Engineered for routine use in workshop and production settings, this reject gauge balances wear resistance with ergonomic handling so that inspections remain swift and reliable. The design suits inline checks and final inspection stations where quick verification prevents nonconforming parts from progressing. Combined with Metav IndustryLine’s quality control approach, the gauge contributes to lower scrap rates and more predictable throughput across machining and assembly operations. For reproducible rejection checks and documented calibration, contact Metav Werkzeuge for purchasing advice and delivery from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M315.695.8 GTIN: 4054469154343 Tariff number: 90173000 Facts Size: M95×3 Weight: 2 kg Standard: DIN 13, 6H Special features Material: hardened gauge steel Thread hand: right Supplied with calibration certificate Category: gauges / plug gauges Condition: no‑go (reject) gauge FAQ What is this gauge intended to check? The gauge is a no‑go thread plug designed to check internal metric fine threads; the Gewinde‑Lehrdorn AUSSCHUSS M95×3 verifies that an internal thread exceeds the reject limit. Does the gauge arrive ready for use in quality documentation? Yes, the Gewinde‑Lehrdorn AUSSCHUSS M95×3 is supplied with a calibration certificate and can be integrated immediately into documented inspection procedures. Which standard does the gauge conform to? Manufactured to DIN 13 with tolerance class 6H, the gauge meets established thread specification practices for metric fine threads. What material is the gauge made from and how does that affect durability? The plug is made from hardened gauge steel, which provides high wear resistance and dimensional stability for repetitive inspections. Is this product part of a recognised product family? This gauge is offered under the Metav IndustryLine range and is listed as article number M315.695.8 for identification in procurement and inventory Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x4 Thread Go Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of certified traceability and robust construction to maintain thread quality on the production line; the gauge’s hardened gauge steel and conformity with DIN 13, 6H ensure reproducible inspections. Order the certified NO‑GO thread plug gauge directly via Metav Werkzeuge or consult our specialists for integration advice. Thread plug gauge NO‑GO M95×4 for metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread plug gauge NO‑GO M95×4 is a precision inspection tool for checking internal metric ISO fine threads in production and incoming inspection. Calibrated delivery with certificate Hardened gauge steel construction For metric ISO fine thread M95×4 right‑hand Conforms to DIN 13, 6H tolerance Consistent tolerance control where it matters A dedicated NO‑GO plug gauge is the fastest way to verify whether an internal thread exceeds its upper tolerance limits. Made from hardened gauge steel, this gauge resists wear and maintains dimensional stability during repetitive checks. The designation M95×4 specifies the thread diameter and pitch for metric fine threads, while the 6H tolerance class under DIN 13 indicates the accepted internal-thread limits; together these ensure compatibility with standardised thread forms and reduce ambiguous assessment during production sampling. Supplied with a calibration certificate, the tool supports traceable inspection records. Streamlined inspection for reliable throughput Using a purpose‑built reject gauge reduces measurement time and decision latency on the shop floor: a simple GO/NO‑GO check replaces slower measurement chains where speed and repeatability are priorities. The gauge’s robust construction and the declared tolerance class guarantee repeatable results, helping to cut down on rework and avoid batch scrapping. Where inline or spot checks are required, this plug gauge provides clear, binary outcomes that simplify quality control workflows and support process stability. Practical application and integration into quality systems Designed for routine thread verification, the gauge is suitable for incoming inspection, process control and final checks of assemblies that incorporate metric ISO fine threads. The combination of a standardised thread form, hardened material and delivered calibration promotes acceptance in regulated environments and facilitates documentation. For production planners and quality engineers, the tool is a compact solution to safeguard thread conformity without complex measuring procedures, enabling faster turnaround and measurable reductions in non‑conforming parts. Contact Metav Werkzeuge for a certified NO‑GO plug gauge or to discuss how the Metav IndustryLine M95×4 can be integrated into existing inspection procedures. Technical data Article number: M315.695.9 GTIN: 4054469155081 Tariff number: 90173000 Core specifications Thread size: M95×4 Weight: 2 kg Tolerance class: 6H (DIN 13) Materials & features Type: NO‑GO plug gauge (reject) Material: gauge steel, hardened Thread form: metric ISO fine thread, right‑hand Supplied with calibration certificate FAQ What is the primary function of this gauge? The NO‑GO plug gauge is used to check whether an internal metric ISO fine thread exceeds permissible limits; the plug fails when the thread is too large or out of tolerance. Is the gauge delivered calibrated? Yes, the gauge is supplied with a calibration certificate confirming the measured condition at delivery. Which thread size and tolerance does the gauge cover? This gauge is specified for M95×4 threads and corresponds to the 6H tolerance class according to DIN 13. Can this gauge be used in production spot checks? Yes, the design of the NO‑GO plug gauge suits rapid spot checks and routine inline inspections to prevent non‑conforming parts from proceeding. What material is the gauge made from? The gauge is manufactured from hardened gauge steel to ensure wear resistance and dimensional stability during repetitive use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x4 Thread Go Plug Gauge For Metric Fine Thread Right-Hand, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of precise thread verification through hardened gauge steel construction and DIN 13, 6H conformity, delivered with a traceable calibration certificate for immediate use in inspection routines. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread plug gauge GUT M95 x 4.0 — right-hand, metric ISO fine thread The Thread plug gauge GUT M95 x 4.0 is a right-hand plug mandrel designed for rapid verification of metric ISO fine threads in production and inspection environments. Right-hand M95 x 4.0 metric fine-thread gauge Hardened gauge steel for long-term stability Conforms to DIN 13, 6H tolerance class Supplied with traceable calibration certificate Reliable conformity checks for fewer rejects The thread plug gauge provides a quick and objective check of internal thread form and pitch, helping to identify out-of-tolerance components before they reach assembly. Made from hardened gauge steel, the mandrel resists wear and maintains dimensional stability over repeated use, which reduces the need for frequent replacement and lowers total process cost. Conformity to DIN 13, 6H ensures results are comparable across suppliers and inspection stages, supporting consistent quality control and faster decision-making on batch acceptance. Robust construction that stands up to workshop use Engineered as a right-hand plug mandrel for fine threads, this verification tool combines compact handling with the rigidity required for reliable checks on larger diameters. The M95 x 4.0 size is suited to heavy-duty applications where repeatable measurements are essential; the hardened measuring body minimises distortion under normal inspection forces. Clear mechanical design reduces operator influence on results, enabling straightforward checks during incoming inspection or in-process control without specialised fixtures. Traceable calibration for metrological certainty Delivered with a calibration certificate, the gauge arrives ready for immediate integration into a traceable inspection regime. The calibration document records measured conformity and provides a documented baseline for future verifications, which supports audit requirements and process validation. This traceability strengthens supplier compliance checks and internal quality records, making the tool appropriate for supply-chain control and laboratory use where documented measurement evidence is required. Practical application and compatibility in industry Suitable for machine shops, toolrooms and quality labs, the gauge is tailored to check metric ISO fine threads in components and assemblies. Its construction and tolerance class make it compatible with standardised inspection procedures, simplifying acceptance criteria and reducing ambiguity in pass/fail decisions. The design supports efficient cycle times in batch inspection, contributing to smoother production flow and fewer downstream reworks. Contact Metav Werkzeuge GmbH in Emmerich for technical advice or procurement: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: M315.595.9 GTIN: 4054469154909 Label: Gewinde-Lehrdorn GUT M 95 X 4,0 für metrisches ISO-Feingewinde, rechts Facts Thread size: M95 x 4.0 Tolerance class: DIN 13, 6H Weight: 2 kg Tariff number: 90173000 Special features Material: gauge steel, hardened Right-hand plug mandrel for metric ISO fine threads Supplied with calibration certificate FAQ What is the primary purpose of this thread plug gauge? The thread plug gauge GUT M95 x 4.0 is used to verify internal metric ISO fine threads to DIN 13, 6H, providing a clear pass/fail check during incoming or in-process inspection. Does the gauge include calibration documentation? Yes, the gauge is supplied with a traceable calibration certificate so the M95 x 4.0 mandrel can be used immediately within documented inspection routines. Which materials and environments is the gauge suitable for? The hardened gauge steel construction is intended for general workshop and laboratory environments where mechanical wear resistance and dimensional stability are required. How does the DIN 13, 6H designation affect use? DIN 13, 6H specifies the tolerance class and makes the inspection results comparable to other components and gauges designed to the same standard, simplifying acceptance criteria. Can this gauge be used for both production and laboratory checks? Yes, the robust design and calibration certificate make it suitable for shop-floor verification as well as for documented laboratory checks; SKU M315.595.9 identifies the exact item. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x4 Thread Go/No-Go Ring Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Benefit from definitive accept/reject control and documented traceability with this hardened steel No‑go ring gauge. The M95 x 4.0 dimension, built to DIN 13, 6g, and supplied with a calibration certificate, supports fast inline inspection and audit‑ready documentation. Order the gauge directly via Metav Werkzeuge or consult our specialists for technical clarification. No‑go thread ring gauge M95 x 4.0 — right‑hand, DIN 13 6g (Metav IndustryLine) The No‑go thread ring gauge M95 x 4.0 is a right‑hand ring designed for rapid acceptance testing of metric ISO fine threads in production and quality control environments No-go gauge for M95 x 4.0 metric threads Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Supplied with calibration certificate Fast, objective acceptance checks for production The hardened gauge steel construction preserves the reference form under frequent use, enabling reliable limit testing without subjective interpretation. Designed to the DIN 13, 6g specification, the ring establishes a clear no‑go boundary for metric fine threads so that faulty parts are identified immediately at the inspection stage. This reduces downstream assembly errors and minimises rework by providing a simple, repeatable acceptance criterion that integrates with shop‑floor workflows. Audit‑ready calibration and traceability Delivered with a documented calibration certificate, the gauge supports traceability and simplifies compliance with internal quality procedures or external audits. The presence of a calibration record means inspection results can be traced back to a verified reference, helping to maintain documented process capability. The engraved M95 x 4.0 marking ensures unambiguous identification on the inspection bench, speeding up handling and record keeping in serial production environments. Durable design that keeps inspection consistent The right‑hand No‑go geometry matches standard production threads and, together with the hardened material, resists wear that would otherwise erode the control limit. Its compact ring form is suitable for bench testing and production checks where a clear go/no‑go decision is required within seconds. Supplied and distributed via Metav IndustryLine, the product benefits from a European quality filter and reliable stock handling that supports continuous supply for routine inspection needs. For documented acceptance testing and assured traceability, contact Metav Werkzeuge to request a datasheet or a formal quotation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.895.9 GTIN: 4054469155449 Label: No-go thread ring gauge M95 x 4.0, metric ISO fine thread, right-hand Tariff number: 90173000 Facts Size: M95 x 4.0 Thread pitch: 4.0 mm Nominal diameter: 95 mm Weight: 2 kg Standard: DIN 13, 6g Special features Material: hardened gauge steel Type: No-go (reject) ring gauge Thread direction: right-hand Supplied with calibration certificate Category: Gauges / Lehren FAQ What is the purpose of this ring gauge? The No‑go thread ring gauge M95 x 4.0 is used to perform decisive accept/reject checks on metric ISO fine threads, preventing undersize or incorrectly formed threads from passing final inspection. Is the gauge supplied calibrated? Yes — the gauge is supplied with a calibration certificate, providing traceability and supporting audit documentation for measurement processes using this Metav IndustryLine ring gauge (sku M315.895.9). Which standard and tolerance does the gauge follow? The tool conforms to DIN 13 with tolerance grade 6g, which specifies the thread limits and ensures compatibility with metric ISO fine thread production. Can this gauge be used for left‑hand threads? No — this ring gauge is manufactured for right‑hand threads; left‑hand applications require the corresponding left‑hand gauge. What material is the gauge made from and how durable is it? The gauge is made from hardened gauge steel, chosen for wear resistance and long service life under repeated engagement in production inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x4 Thread Ring Gauge Metric ISO Fine Thread Right Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of precise, standardised thread verification combined with a robust, hardened construction and a supplied calibration certificate for traceable quality assurance; order or request advice directly via Metav Werkzeuge for application support. Go ring gauge M95 x 4.0 — Go thread ring gauge, hardened gauge steel, DIN 13 (Metav IndustryLine) The Go ring gauge M95 x 4.0 is a right‑hand metric ISO fine‑thread gauge designed for quick go/no‑go checks in production, incoming inspection and quality control stations. Go ring gauge for M95 x 4.0 ISO fine thread Hardened gauge steel for long service life Supplied with calibration certificate Fast, reliable go/no‑go inspection that keeps lines moving The primary advantage of a purpose‑made go/no‑go ring is speed of decision‑making at the inspection point. The measured part either passes the M95 x 4.0 go check or it does not, enabling immediate acceptance or segregation without time‑consuming measurements. For production environments this translates to fewer bottlenecks and a clearer quality status for batches. Built to the DIN 13 thread standard with a 6g tolerance basis, the gauge offers a dependable comparator that integrates easily into routine incoming or in‑process checks and supports consistent throughput. Durable construction to reduce tool replacement and downtime Manufactured from hardened gauge steel, the ring resists wear during repeated engagement, which prolongs service life and reduces the frequency of replacements. The material choice and heat treatment ensure dimensional stability under normal workshop conditions, which diminishes measurement drift and the need for interim corrective actions. Where longevity and repeatability are required, a robust physical design lowers total cost of ownership by keeping inspection tools in service and reducing unscheduled process interruptions. Traceable calibration for audit‑ready quality records This gauge is supplied with a calibration certificate, providing documented traceability for quality systems and audits. The certificate evidences that the tool has been checked and documented prior to delivery, simplifying integration into inspection records and conforming processes. For regulated production or supplier qualification, the presence of a calibration record supports control plans and helps demonstrate adherence to contractual metrology requirements. Practical fit for workshop and laboratory inspection workflows As a Go ring gauge for metric ISO fine threads, the device is well suited to incoming inspection, first article checks and routine process control where a rapid go/no‑go decision is required. The right‑hand thread configuration matches common production parts, and the compact, single‑function design minimises handling complexity on the inspection bench. Used alongside documented sampling plans, the gauge contributes to clearer acceptance criteria and a reduction in unnecessary rework. For reliable thread gauging and application advice, contact Metav Werkzeuge in Emmerich — Metav IndustryLine products are supported from stock and with expert consultancy: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M315.795.9 GTIN: 4054469155265 Customs tariff number: 90173000 Core data Thread size: M95 x 4.0 Tolerance class: 6g Weight: 2 kg Features Material: hardened gauge steel Type: Go ring gauge (right‑hand thread) Standard: DIN 13 Supplied with calibration certificate FAQ What is the intended use of this ring gauge? The Go ring gauge M95 x 4.0 is intended for rapid go/no‑go verification of metric ISO fine threads during incoming inspection and production control. Does the gauge come with traceable documentation? Yes, the gauge is supplied with a calibration certificate that documents the check performed prior to delivery. Which standard and tolerance does this gauge conform to? The ring gauge is manufactured to DIN 13 with a tolerance class of 6g for metric ISO fine threads. What material is the ring made from and why does it matter? The ring is made from hardened gauge steel; this increases wear resistance and maintains dimensional stability for consistent measurements. Is the gauge suitable for automated stations or only manual inspection? The gauge is primarily a manual go/no‑go verification tool; its rugged construction allows use at bench or station checks as part of automated sampling routines, but it is not an active sensor for machine automation Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x6 Thread Go Gauge For Metric ISO Fine Thread Right-Handed, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened Go ring gauge that delivers repeatable acceptance testing for metric fine threads; with conformity to DIN 13 (6g) and an included calibration certificate, this gauge supports reliable quality decisions on the shop floor—order via Metav Werkzeuge or consult our specialists for application advice. Go ring gauge M95 x 6.0 — Thread gauge ring, hardened steel (right‑hand) — Metav IndustryLine A Go ring gauge M95 x 6.0 for quick verification of metric ISO fine threads, right‑hand, designed for production inspection and quality control Hardened gauge steel for long service life Calibrated with certificate included Conforms to DIN 13, tolerance 6g Go ring for M95 x 6.0 right‑hand threads Consistent acceptance testing that speeds production A ring gauge of this design converts thread geometry into a rapid go/no‑go decision, removing ambiguity from routine inspections. The Go ring gauge M95 x 6.0 is manufactured from hardened gauge steel, which preserves thread form and ensures dimensional stability even under frequent use; this durability reduces the need for frequent replacements and preserves nominal tolerances. Compliance with DIN 13 (6g) makes the gauge suitable for verifying metric ISO fine threads in standardised production and incoming inspection processes. The included calibration certificate documents initial conformity and supports traceable quality records, helping to maintain process control and audit readiness. Practical benefits for quality control and throughput Using a purpose‑made ring gauge simplifies operator instructions and shortens inspection times: a pass on the go/no‑go check confirms acceptability without complex measurement setups, while a fail directs immediate corrective action. The right‑hand specification matches common thread directions in machined components, avoiding mismatches at inspection. Alongside faster throughput, this approach minimises subjective judgement and reduces scrap rates—advantages that translate directly into measurable productivity gains and fewer reworks on the production line. Robust design for workshop and inspection environments The gauge’s construction in hardened gauging steel and its compact form make it resilient to knocks and handling typical in workshop use; the relatively modest mass supports safe, ergonomic handling during frequent checks. Traceability is supported by the supplied calibration documentation, enabling straightforward integration into inspection logs and quality management systems. For buyers seeking dependable metrology tools, this ring gauge combines practical longevity with straightforward application, reflecting Metav’s focus on accessible precision and dependable supply for industry and trade. Contact Metav Werkzeuge to specify this Metav IndustryLine Go ring gauge for threaded part inspection and request the calibration certificate for traceable quality assurance. Technical data Article number: M315.795.A GTIN: 4054469155838 Label: Gewinde-Lehrring GUT M 95 X 6,0 Facts Weight: 2 kg Thread size: M95 x 6.0 Standard: DIN 13, 6g Customs tariff number: 90173000 Special features Material: gauging steel, hardened Gauge type: Go ring gauge (GUT) Hand: Right‑hand thread Delivered with calibration certificate FAQ What is the intended use of this ring gauge? The ring gauge is intended for acceptance testing of metric ISO fine threads; the Go ring checks whether a thread meets the M95 x 6.0 specification to DIN 13 (6g). Does the gauge come with traceable calibration? Yes, the gauge is supplied with a calibration certificate that documents its conformity at delivery and supports traceability in inspection records. Which materials is the gauge made from? The ring is produced from hardened gauging steel, chosen for wear resistance and long‑term dimensional stability. Is this a Go or No‑Go gauge? This item is a Go ring gauge (GUT) for right‑hand threads and is used to confirm that a thread is within the acceptable limits. Can this gauge be used in production environments? Yes, the gauge is designed for regular use in workshop and production inspection tasks where quick, reliable thread verification is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x6 Thread Go Plug Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated - Metav IndustryLine
Benefit from a hardened gauge-steel construction, conformity to DIN 13, 6H and the included calibration certificate for consistent thread verification and fewer production reworks. Order the thread plug gauge directly via Metav Werkzeuge or consult our specialists for technical guidance. Thread plug gauge GUT M95×6.0 — Metric ISO fine thread, right-hand (Metav IndustryLine) The Thread plug gauge GUT M95×6.0 is a hardened go gauge for inspection and acceptance testing of M95×6.0 metric ISO fine threads in production and quality control environments. Includes calibration certificate Hardened gauge-steel construction Conforms to DIN 13, 6H For M95×6.0 metric fine thread, right-hand Engineered for reliable thread verification The plug is manufactured from hardened gauge steel, providing the rigidity required for repeatable inspections and long service life. Built to the DIN 13, 6H tolerance class, the gauge verifies the form and size of M95×6.0 metric fine threads by the established go/no‑go method: the go feature confirms that the minimum material and thread geometry meet specifications. This direct verification reduces guesswork during incoming inspections and in-process checks, supporting stable production yields and lowering the risk of costly rework. Calibration and traceability for quality assurance Delivered with a calibration certificate, the tool offers documented traceability that supports internal quality systems and external audits. The certificate confirms the instrument’s conformity at the time of shipment and simplifies record-keeping for audit trails. Using a calibrated plug gauge improves measurement confidence during first-article inspections and routine sampling, so decisions about acceptance or corrective action rest on verifiable data rather than operator estimation. Practical design for workshop and inspection use Designed as a right-hand go plug, the gauge is straightforward to handle in workshop and inspection settings. The clear designation as a Go (GUT) gauge assists technicians in rapid pass/fail checks without additional interpretation. The compact but robust construction makes it suitable for use at worksites and in inspection benches where a reliable mechanical reference is required. The combination of standardisation and durability ensures the gauge remains a practical tool for production control across machining and assembly processes. Choose the Metav IndustryLine thread plug gauge for consistent thread inspection and contact Metav Werkzeuge for specification support and ordering. Technical Data SKU: M315.595.A GTIN: 4054469155579 Brand: Metav IndustryLine Weight: 2 kg Customs tariff number: 90173000 Specifications Thread size: M95×6.0 Major diameter: 95 mm Pitch: 6.0 mm Tolerance/class: DIN 13, 6H Thread type: Metric ISO fine thread, right-hand Features Material: gauge steel, hardened Includes calibration certificate Function: Go (GUT) gauge Conforms to DIN 13, 6H Suitable for inspection and acceptance testing Category: Gauges / Plug gauges FAQ What is the primary use of this plug gauge? The plug gauge is used to verify the acceptability of internal threads by checking that an M95×6.0 metric ISO fine thread meets the required go tolerance; it is intended for production and quality-control checks. Is the gauge supplied calibrated? Yes, the thread plug gauge is delivered with a calibration certificate, providing traceability and documented verification of conformity at the time of shipment. Which standard governs the tolerance of this gauge? The instrument conforms to DIN 13, 6H, which defines the tolerance class and acceptance criteria for this metric ISO fine thread size. Does the gauge indicate whether the thread is right- or left-hand? This item is manufactured as a right-hand go plug for M95×6.0 threads; the designation is marked and reflected in the product documentation. How should the gauge results be interpreted on the shop floor? If the go feature of the gauge enters the thread fully without binding, the thread is within the specified go limit; failure to enter indicates non-conformity requiring further assessment or corrective action. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95x6 Thread Ring Gauge Metric ISO Fine Pitch Right-Hand, Reject, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a robust, hardened thread ring gauge that combines standard‑conform inspection with traceable calibration; the No‑go design for M95×6 right‑hand threads protects production quality and simplifies final acceptance. Order the gauge directly via Metav Werkzeuge or consult the Metav team for specification support and availability. Thread Ring Gauge No‑Go M95×6 — Metric ISO fine thread, DIN 13 6g | Metav IndustryLine Thread Ring Gauge No‑Go M95×6 for right‑hand metric ISO fine threads, designed for fast production checks and laboratory verification No‑go ring for M95×6 threads Hardened gauge steel construction Tolerance class DIN 13, 6g Supplied with calibration certificate Reliable in‑process thread verification for production environments The No‑go thread ring serves as a decisive pass/fail control in fast‑paced manufacturing. Machined from hardened gauge steel and finished to the DIN 13, 6g tolerance, the gauge provides a clear, repeatable verdict without complex measurement routines. Its compact, single‑piece design resists wear and maintains form under frequent use, so inspection cycles stay short and scrap rates are reduced. This direct approach supports production flow and consistent quality reporting while lowering the time spent on each thread inspection. Faster quality control with a simple go/no‑go concept Integrating a dedicated no‑go ring gauge into the workflow removes ambiguity from thread acceptance. The ring checks the critical external profile of right‑hand metric ISO fine threads and, when used alongside a corresponding “go” gauge, forms a complete go/no‑go system that accelerates throughput. Because the device conveys results instantly and requires minimal operator training, it improves line efficiency and helps keep inspection reproducible between shifts. The robust material choice further reduces the need for frequent replacements, improving overall cost‑effectiveness. Traceability and conformity through documented calibration Delivered with a calibration certificate, the gauge supports traceability requirements in quality management systems and simplifies audit preparation. The certificate documents measured values and the state of the gauge at delivery, enabling confident integration into inspection plans and first‑article checks. For companies that log inspection tools centrally, this documented calibration gives a reliable baseline and helps demonstrate adherence to internal and external standards when sampling threaded components. For dependable thread inspection and supply details contact Metav Werkzeuge in Emmerich — the Metav team will advise on gauge pairing, stock and lead times to match production needs Technical data Article number: M315.895.A GTIN: 4054469155968 Size: M95×6 Material: Hardened gauge steel Standard: DIN 13, 6g Facts Weight: 2 kg Special features Type: No‑go thread ring for external threads Thread direction: Right‑hand Delivery: Supplied with calibration certificate Application: Inspection of metric ISO fine threads FAQ What does the no‑go ring confirm during inspection? The no‑go ring confirms whether an external thread exceeds the maximum material condition; if the part does not fit the No‑go thread ring M95×6, the thread is rejected. Is the gauge suitable for right‑hand and left‑hand threads? This gauge is manufactured for right‑hand metric ISO fine threads and must be matched to the correct thread hand for reliable inspection. Does the product arrive calibrated? Yes — the No‑go thread ring M95×6 is supplied with a calibration certificate documenting the measured state at delivery for traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95×1.5 Thread Go Plug Gauge Metric ISO Fine Right-Hand Hardened Gauge, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel construction, DIN‑compliant tolerance and a supplied calibration certificate for dependable thread inspection and quality control. Order the gauge directly via Metav Werkzeuge or consult the specialists for advice on integration into existing inspection routines. Thread plug gauge GO M95 x 1.5 — Metric ISO fine thread, right‑hand (Metav IndustryLine) Thread plug gauge GO M95 x 1.5 is a hardened plug gauge for verification of metric ISO fine internal threads, intended for production inspection and laboratory use. Supplied with calibration certificate For metric ISO fine thread M95×1.5 Hardened gauge steel construction Conforms to DIN 13, tolerance class 6H Consistent verification for fine metric threads The GO gauge offers a rapid, reliable method to confirm internal thread conformity for fine‑pitch metric series. Manufactured in hardened gauge steel, the tool provides wear resistance and stable dimensions across repeated inspections, supporting reproducible pass/fail decisions at the machine or in the inspection room. Where process speed and unambiguous outcomes matter, a plug gauge is a compact means to secure traceable acceptance criteria for threaded components. Traceable calibration and specification conformity Delivered with calibration certificate, this plug gauge documents its inspection validity and dimensional traceability. The gauge is produced to DIN 13, 6H, which defines the internal thread tolerance suitable for ISO metric fine threads; this standardisation simplifies conformance checks against drawing requirements. A documented calibration enables consistent quality records and supports audit trails in regulated or certified production environments. Robust construction tailored to workshop use Constructed from hardened gauge steel, the plug gauge balances toughness with dimensional stability so that repeated engagement with internal threads leaves minimal wear on the working profile. The right‑hand M95×1.5 geometry matches common fine‑thread applications in assemblies and fixtures; the compact, single‑piece design requires no adjustments and reduces handling errors, improving throughput in routine acceptance tests. Integration into quality workflows and inspection plans As a GO‑type plug gauge, the item is intended for go/no‑go decision points within production or incoming inspection. Its straightforward application means rapid checks at the workbench, during assembly or at final inspection, reducing time spent on measuring instruments for clear conformity checks. When recorded alongside component lot data, the calibrated status supports long‑term process capability assessments and corrective actions where required. For expert guidance or supply of Metav IndustryLine thread gauges, contact Metav Werkzeuge in Emmerich for tailored recommendations and prompt delivery. Technical data Article number: M315.595.6 GTIN: 4054469152233 Weight: 2 kg Category: Thread plug gauge Numbers Size: M95 x 1.5 Tariff number: 90173000 Tolerance class: 6H Special features Material: Gauge steel, hardened Type: GO gauge (GUT) Thread form: Metric ISO fine thread, right‑hand Supplied with calibration certificate Standard: DIN 13 FAQ What is the intended use of this plug gauge? The thread plug gauge GO M95 x 1.5 is intended for verification of metric ISO fine internal threads in production and inspection environments, providing a quick go/no‑go assessment. Does the gauge come with traceable calibration? Yes, the plug gauge is supplied with a calibration certificate that documents its inspection status and enables traceability in quality records. Which standard does the gauge comply with? Manufactured to DIN 13 with tolerance class 6H, the gauge conforms to the specification applied for metric internal threads. What material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel, chosen for dimensional stability and wear resistance to ensure reliable, repeatable checks over time. Is this a GO or NO‑GO gauge? This item is a GO (GUT) plug gauge, designed to confirm that an internal thread meets the minimum acceptance profile. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M95×6 Thread Ring Gauge Metric ISO Fine Right-Hand Hardened Gauge With Calibration Certificate, DIN 13 6H - Metav IndustryLine
Ensure precise thread inspection with a hardened gauge-steel no-go plug gauge for M95 x 6.0 metric fine threads, produced to DIN 13, 6H and delivered with a calibration certificate for full traceability. Benefit from robust construction and conformity documentation — order this Metav IndustryLine gauge directly via Metav Werkzeuge or consult our technical advisors for specification support. Thread plug gauge (no-go) M95 x 6.0 — metric ISO fine thread, right-hand | Metav IndustryLine A no-go plug gauge for inspecting M95 x 6.0 metric ISO fine threads; designed for pass/fail verification in production and incoming inspection of right‑hand threaded components. No-go plug gauge for M95 x 6 metric fine threads Hardened gauge steel for long service life Supplied with calibration certificate Conforms to DIN 13, tolerance 6H Traceable inspection that fits quality systems The no-go plug gauge offers an immediate, unambiguous check for oversize or out-of-tolerance internal threads, supporting documented quality control processes. Supplied with a calibration certificate, the gauge provides measurable traceability and reduces uncertainty in acceptance decisions. Conformity to DIN 13, 6H ensures compatibility with standardised production tolerances and simplifies integration into inspection routines and inspection plans. Built for repeatable, workshop-ready performance Manufactured from hardened gauge steel, the gauge resists wear and retains its functional dimensions through repeated use, extending interval times between inspections. The right-hand M95 x 6.0 geometry is finished to reliable working surfaces that give fast tactile feedback during checks, helping operators identify rejects without complex measurement setups. Robust construction and a compact form support consistent handling and repeatability in routine checks. Practical benefits for procurement and production control The plug gauge’s straightforward go/no-go principle reduces inspection time and training requirements while improving throughput in incoming goods verification and final inspection. With the calibration certificate included, auditors and quality managers receive documented proof of conformity at delivery, aiding compliance and reducing administrative follow-up. The Metav IndustryLine designation indicates supply chain reliability and local stock handling from Emmerich for efficient replenishment. For secure traceability and rapid technical guidance on the Metav IndustryLine M95 no-go plug gauge, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 — our advisors will support specification checks and supply. Technical Data Article number: M315.695.A GTIN: 4054469155708 Thread size: M95 x 6.0 Type: No-go (reject) plug gauge, right-hand Material: Gauge steel, hardened Standard: DIN 13, 6H Facts Weight: 2 kg Tariff number: 90173000 Special features Supplied with calibration certificate Category: Gauges / Plug gauges SKU: M315.695.A FAQ Is this gauge suitable for fine-pitch metric threads? The plug gauge is specified for M95 x 6.0 metric ISO fine threads and is manufactured to DIN 13, 6H, making it suitable for inspection of right‑hand fine-threaded components. What does “no-go” mean in practice? A no-go (reject) plug gauge is used to detect oversize or out-of-tolerance internal threads: if the no-go plug gauge enters the thread, the part fails the inspection and must be rejected or reworked. Is a calibration certificate included with delivery? Yes — the gauge is supplied with a calibration certificate, providing documented evidence of conformity at the time of delivery for audit and traceability purposes. What is the gauge made from and how durable is it? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability to ensure long service life under routine inspection conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M9x1 Thread Go Gauge Metric ISO Fine Right-Hand Hardened Gauge Steel DIN 13, 6g - Metav IndustryLine
Ensure repeatable thread inspection with hardened gauge steel construction and conformity to DIN 13 (6g); the compact M9 × 1 mm ring weighs just 0.04 kg for easy handling during routine checks. Order the gauge directly via Metav Werkzeuge or ask our consultants if needed. Thread Ring M9 × 1 mm (DIN 13, 6g) — Right‑hand Thread Gauge — Metav IndustryLine The Thread Ring M9 × 1 mm is a hardened limit gauge designed for fast verification of M9 × 1 metric ISO fine threads in production and inspection environments. Hardened gauge steel construction Conforms to DIN 13 tolerance 6g For M9 × 1 mm metric ISO fine threads Right‑hand thread verification Consistent conformity for reliable pass/fail inspection This ring gauge provides a compact, reliable method for pass/fail verification of fine metric threads. Built to DIN 13 with a 6g tolerance, it distinguishes acceptable thread profiles from rejects without the need for dimensional arithmetic at the bench. The standardised tolerance class ensures results are comparable across batches and suppliers, reducing ambiguity in acceptance criteria and supporting a reproducible quality workflow on the shop floor. Robust material and low‑effort handling for long service life Machined from hardened gauge steel, the ring resists wear under repeated use and preserves the reference profile over time. The lightweight construction (approx. 0.04 kg) and compact form factor allow single‑hand operation for quick in‑process checks, while the hardened surface reduces the frequency of replacement—delivering lower life‑cycle costs and less downtime for routine inspections. Intended use and practical integration into inspection routines Designed for inspection of metric ISO fine threads, the ring serves as a go/no‑go control in incoming inspection, production sampling and final checks. Its right‑hand orientation matches common threaded components, enabling immediate assessment of thread form and pitch. For documentation, the ring can be referenced by its SKU (M315.209.4) when recording inspection results or ordering replacements, supporting traceability in quality records. Contact Metav Werkzeuge for expert advice on the Metav IndustryLine thread ring and to arrange supply or batch requirements — Metav Werkzeuge offers tailored guidance from its Emmerich quality hub Technical Data Article number: M315.209.4 GTIN: 4054469125572 Weight: 0.04 kg Thread size: M9 × 1 mm Standard: DIN 13 (6g) Material: hardened gauge steel Tariff number: 90173000 Data eClass: 21170214 Category: Gauges / Thread rings Orientation: Right‑hand thread SKU: M315.209.4 Special features For metric ISO fine threads Limit gauge — go/no‑go functionality Compact, low‑mass design for easy handling Manufacturer range: Metav IndustryLine FAQ What tolerance class does the ring use and what does it mean? The ring follows DIN 13 with tolerance 6g, which defines the permissible thread form and pitch variation for a standard metric fine thread and allows clear go/no‑go assessment against that industry reference. Is this thread ring suitable for production sampling? Yes, the ring is intended for routine production and incoming inspections to verify conformity of M9 × 1 metric ISO fine threads and to provide immediate pass/fail feedback. What material is the gauge made from and why is that important? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability so the reference profile remains reliable over extended use. Is a calibration certificate supplied with the ring? The product is supplied as manufactured to the stated standard; a calibration certificate is not included by default unless explicitly specified for a particular delivery. How should the ring be identified in documentation or orders? Use the designation Thread Ring M9 × 1 mm and SKU M315.209.4 when recording inspection results or placing replacement orders to ensure exact matching. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com