Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
M8×1.25 Three-Point Thread Gauge, Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Taking advantage of the combination of repeatable go/no‑go verification, hardened construction and conformity to DIN 13, 6g, this gauge supports consistent quality control and reduces rework. Order the gauge directly via Metav Werkzeuge or consult the Metav team for application advice. Thread ring gauge M8 × 1.25 — Go ring gauge, right‑hand, hardened steel A thread ring gauge M8 × 1.25 designed for quick verification of ISO metric threads in production and inspection environments Thread ring gauge M8 × 1.25 ISO metric Tolerance grade DIN 13, 6g – go check Hardened gauge steel for durable accuracy Right‑hand thread; weight 0.07 kg Fast, reliable thread verification on the shop floor A dedicated go ring gauge like this offers an immediate binary result for thread acceptance: the component either passes the go check or requires attention. Built to the DIN 13, 6g tolerance, the gauge is suitable for standard ISO metric checks at assembly stations and in incoming inspection. The compact geometry and low mass simplify handling at the workstation while the hardened gauge steel body preserves the nominal dimensions under repetitive use. This direct verification method reduces measurement time compared with full-profile coordinate inspection and supports faster throughput in production. Engineered for repeatable accuracy and long service life Heat treatment and careful finishing of the gauge steel ensure wear resistance and dimensional stability over many cycles. A hardened go ring gauge maintains the calibrated limit that defines acceptance; this results in fewer false rejects and consistent alignment with internal quality plans. Where traceable checks are required, the gauge provides a robust reference for pass/fail decisions and complements more detailed metrology equipment. The lightweight 0.07 kg construction also lowers operator fatigue during frequent checks, keeping routine quality control both efficient and ergonomically sound. Practical integration into inspection workflows The ring gauge is optimised for rapid inspection of right‑hand ISO metric threads with M8 × 1.25 nominal size and 1.25 mm pitch, making it particularly useful in small‑part manufacturing, fastener production and mechanical assemblies. Its straightforward function reduces training time for operators: the tactile go test is easy to perform and leaves no interpretation ambiguity. When used alongside documented inspection steps, the gauge supports a reliable quality chain and helps prevent non‑conforming parts from progressing through assembly. For reliable thread checks and long‑term consistency, contact Metav Werkzeuge for ordering and application guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the M8 go ring gauge and suitable inspection strategies. Technical data Article number: M315.108 GTIN: 4054469123868 Weight: 0.07 kg Material: gauge steel, hardened Standard: DIN 13, 6g Mass: M8 × 1.25 Facts Nominal diameter: M8 Thread pitch: 1.25 mm Tolerance grade: 6g (go) Tariff number: 90173000 Special features Go ring gauge for ISO metric threads Right‑hand thread direction Hardened for extended service life Category: gauges / Lehren Lightweight, easy to handle FAQ What does the go ring gauge check? The go ring gauge verifies whether an ISO metric M8 × 1.25 external thread meets the go limit defined by DIN 13, 6g; a successful entry indicates the thread is within the acceptable major and pitch diameter for the go condition. Can the gauge be used on plated or coated parts? Use of the gauge on plated or coated threads requires consideration of the coating thickness; the M8 × 1.25 go ring gauge will accept parts within its specified limits, so coatings that significantly change dimensions should be allowed for in process specifications. How should the ring gauge be stored to maintain accuracy? Store the ring gauge dry and protected from impact and corrosive environments; the hardened gauge steel resists wear, but physical shocks or contamination can affect the limit surface and compromise repeatability. Is the gauge suitable for production line use? Yes, the design and low mass of this go ring gauge make it suitable for frequent shop‑floor checks and inline verification, providing fast pass/fail results without the need for complex measurement equipment. What identifies this item in stock or orders? The product is listed as Thread ring gauge M8 × 1.25 (M315.108) and can be referenced by article number M315.108 or GTIN 4054469123868 for procurement and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M8×1.25mm Limit Thread Go/No-Go Plug Gauge Right-Hand, Hardened Gauge Steel DIN 13 6H - Metav IndustryLine
The product data contain contradictory status information — the item is marked both as scrap and as being in good condition. This inconsistency creates confusion and prevents the accurate generation of a product description, which is essential for clear communication and proper categorisation. To ensure the data's reliability and usability, please review and correct these discrepancies in the source data. Resolving these issues will enable the creation of a consistent and precise product description, avoiding potential misunderstandings or errors in further processes. Accurate data is crucial for maintaining operational efficiency and ensuring the integrity of product-related information.
M9 x 1.25 Thread Go Ring Right-Hand, Hardened Gauge Steel, DIN 13 6g - Metav IndustryLine
Take advantage of the combination of precise conformity to DIN standards, hardened construction and compact handling for consistent thread inspections and fewer assembly issues; order the gauge via Metav Werkzeuge or consult our sales team for suitability and delivery. Thread ring gauge M9 x 1.25 mm — DIN 13, tolerance 6g (Metav IndustryLine) A thread ring gauge M9 x 1.25 mm designed for rapid verification of external metric ISO threads in production and incoming‑inspection environments. Hardened gauge steel for long service life DIN 13 standard, tolerance class 6g M9 x 1.25 mm metric ISO thread Right‑hand thread, workshop inspection ready Ensure correct fit and reduce assembly rework A limit ring for direct go/no‑go inspection delivers a simple, objective decision during routine checks. Compliant with DIN 13 and specified to tolerance class 6g, this ring verifies whether an external metric ISO thread meets the required form and pitch before parts proceed to assembly. Using a dedicated thread ring avoids subjective judgements and shortens inspection time: a pass/fail outcome replaces time‑consuming measurements, helping to reduce downstream rejects and improve first‑pass yield. Durable construction for frequent shop‑floor checks Manufactured from hardened gauge steel, the ring is built to withstand repetitive engagement with threaded parts while maintaining its limit dimensions. The robust material and heat treatment ensure low wear over many cycles, preserving the reference condition that quality checks rely upon. At approximately 0.1 kg, the component is compact and easy to handle during rapid inspections, yet solid enough to resist deformation under normal use. The right‑hand orientation and ISO metric form make it immediately compatible with standard production threads. Integrate quickly into production and inspection workflows The ring is a practical tool for assembly plants, toolrooms and quality control stations where throughput and traceability matter. Identifiers such as the SKU M315.209 and GTIN allow straightforward inventory management and traceability across inspection records. As a fixed limit gauge, it complements measuring instruments and can be used as the frontline quality gate: misplaced or non‑conforming parts are identified early, saving machining time and assembly resources. The clear conformity to international norms supports supplier audits and routine quality documentation. For robust, standards‑based thread inspection choose the Metav IndustryLine ring gauge—contact Metav Werkzeuge in Emmerich for technical clarification or to arrange delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M315.209 GTIN: 4054469125565 Weight: 0.1 kg Material: hardened gauge steel Thread size: M9 x 1.25 mm Standard: DIN 13, 6g Data Tolerance class: 6g Tariff number: 90173000 Special features Right‑hand metric ISO thread Limit ring for go/no‑go inspection Compact, shop‑floor friendly design FAQ What is the primary use of this ring gauge? The ring serves as a fixed limit gauge for quick go/no‑go checks of external metric ISO threads; the thread ring gauge M9 x 1.25 mm confirms conformity to DIN 13, 6g. Which thread standard does it verify? It verifies metric ISO threads manufactured to DIN 13 with a tolerance of 6g, suitable for right‑hand external threads. Is the gauge suitable for production‑line inspection? Yes, the robust hardened gauge steel construction and compact weight make the ring appropriate for frequent, rapid checks on the shop floor. How is the gauge identified in inventory systems? The item is listed as SKU M315.209 and carries GTIN 4054469125565 for clear traceability. Can this ring be used for non‑standard or left‑hand threads? This particular version is for right‑hand metric ISO threads; for other thread forms or left‑hand variants, consult the product range for the corresponding ring gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x1.5 Go/No-Go Thread Plug Gauge Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated - Metav IndustryLine
Benefit from a combination of hardened gauge steel, DIN 13 tolerance class 6H and an included calibration certificate for repeatable, traceable thread inspections; order the gauge directly via Metav Werkzeuge or ask our consultants for product matching and measurement planning. Thread plug gauge AUSSCHUSS M90 x 1.5 – Metric ISO fine thread, DIN 13 (6H) by Metav IndustryLine A thread plug gauge M90 x 1.5 for verification of right‑hand metric ISO fine internal threads, designed for workshop inspection and quality control. Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Supplied with calibration certificate Built for reliable, measurable inspections The gauge is manufactured from hardened gauge steel, providing dimensional stability and wear resistance that support repeatable checks over many cycles. Manufactured to DIN 13 with tolerance class 6H, the tool gives a clear, objective pass/fail reference for internal threads of the specified size. The supplied calibration certificate documents the measuring status and enables traceable results during incoming inspection, in‑process checks or final acceptance testing. This emphasis on documented accuracy reduces ambiguous decisions at the control point and shortens inspection times. Robust design reduces handling uncertainty With a nominal thread of M90 x 1.5, the mandrel is sized for metric ISO fine threads where precise fit assessment is required. The solid construction and balanced mass make it easy to handle without unnecessary flex, and the hardened finish resists surface damage that could bias outcomes. The gauge is marked as AUSSCHUSS, indicating its classification in stock; this labelling aids inventory management and ensures the inspection status is unambiguous on the shop floor. Where reproducibility matters, a robust physical gauge simplifies operator routines and reduces rework caused by uncertain assessments. Practical application in production and quality workflows Used as a direct verification tool, the plug gauge confirms whether an internal thread corresponds to the nominal form and tolerance class; its use complements dimensional measurement systems by providing immediate go/no‑go clarity on threaded components. The combination of standard conformity and a calibration record supports audits and process validation, allowing recorded measurements to be referenced in quality documentation. Integrating a standardised gauge into the inspection plan streamlines decisions and helps maintain consistent quality across batches and shifts. For a traceable, workshop‑ready thread verification solution from Metav IndustryLine, contact Metav Werkzeuge to discuss the Thread plug gauge M90 x 1.5 and ensure the right inspection strategy for the production environment – Metav Werkzeuge can advise on stock status and delivery options Technical data Article number: M315.690.6 GTIN: 4054469152455 Brand: Metav IndustryLine Facts Thread size: M90 x 1.5 Weight: 2 kg Tariff number: 90173000 eClass code: 21170228 Special features Material: hardened gauge steel Standard: DIN 13, tolerance class 6H Right‑hand metric ISO fine thread Supplied with calibration certificate Label: AUSSCHUSS (reject classification) FAQ What does the label AUSSCHUSS mean for this plug gauge? The label indicates the stock classification; the Thread plug gauge M90 x 1.5 is marked as AUSSCHUSS to make its status clear for inventory and inspection planning. Is a calibration certificate included with the gauge? Yes, the Thread plug gauge M90 x 1.5 is supplied with a calibration certificate, which documents the measuring condition and supports traceability for quality records. Which standard and tolerance class does the gauge follow? The gauge conforms to DIN 13 with tolerance class 6H, providing a standardised reference for metric ISO fine internal threads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x1.5 Thread Go/No-Go Plug Gauge For ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Precision inspection assured by hardened gauge steel, conformity to DIN 13, 6H and delivery with a calibration certificate for traceable quality records. Benefit from robust right‑hand Go checking at the M90 x 1.5 pitch for consistent pass/fail decisions. Order the Go thread plug gauge M90 x 1.5 directly via Metav Werkzeuge or ask our consultants if needed. Go Thread Plug Gauge M90 x 1.5 — Right‑hand, DIN 13, 6H (Metav IndustryLine) A Go Thread Plug Gauge M90 x 1.5 designed for rapid verification of metric ISO fine threads in shop‑floor inspection and serial production quality control Go gauge M90 x 1.5, right‑hand Hardened gauge steel construction Conforms to DIN 13, tolerance 6H Calibrated delivery with certificate Faster, reproducible go/no‑go inspection for production control The Go plug gauge performs a single, decisive check that confirms whether an internal thread meets the required acceptance limits. With the nominal size M90 x 1.5 and the tolerance band specified by DIN 13, 6H, the gauge reduces interpretation errors and speeds up sampling routines. Using a dedicated plug for right‑hand threads simplifies workflow: a pass is immediate, a fail indicates rework or segregation. This direct verification method lowers scrap rates and shortens inspection time, supporting a lean quality process. Robust materials for long service life and stable results Manufactured from hardened gauge steel, the inspection tool is engineered for resistance to wear and dimensional drift under repeated use. The choice of hardened measuring steel maintains the plug profile and pitch form across many engagement cycles, which preserves measurement integrity and reduces replacement intervals. The solid construction and balanced mass also aid handling stability during tactile checks, giving reliable mechanical control when gauging coarse or fine pitch threads on production components. Traceable calibration to support quality systems The thread plug gauge is supplied with a calibration certificate, confirming that each instrument has been checked and documented against measurement standards. This traceable evidence integrates directly into quality documentation and audit trails, simplifying conformity proofs during incoming inspection, production audits or supplier quality agreements. As a calibrated inspection tool, the gauge enables consistent acceptance criteria across shifts and operators and supports statistically informed quality decisions. Practical integration into workshop inspection routines Compact and purpose‑built, the threaded plug is straightforward to store and to use at a workbench, in a metrology room or directly at the machine for first‑off checks. The right‑hand Go design matches common mating parts and is suited to serial verification where speed matters. Clear pass/fail interpretation means inspection staff can focus on corrective action rather than measurement ambiguity, improving throughput. For bespoke or extended verification strategies, the gauge can be combined with existing control plans or sampling procedures without additional setup. Contact Metav Werkzeuge today to secure the Metav IndustryLine Go thread plug gauge M90 x 1.5 with calibration certificate and integrate reliable thread inspection into your production workflow Technical data Article number: M315.590.6 GTIN: 4054469152219 Customs tariff number: 90173000 Facts Weight: 2 kg Thread size: M90 x 1.5 Tolerance class: DIN 13, 6H Special features Material: gauge steel, hardened Type: Go (GUT), right‑hand Delivery: calibration certificate included FAQ What does a Go thread plug gauge check? A Go thread plug gauge checks that the internal thread falls within the allowable acceptance limits; the Go thread plug gauge M90 x 1.5 (Metav IndustryLine, SKU M315.590.6) confirms that a mating bolt will engage without interference. Is the gauge delivered calibrated? Yes, the gauge is supplied with a calibration certificate; the calibrated delivery documents the inspection status of the Metav IndustryLine Go thread plug gauge and supports traceability in quality records. Which standard does the gauge conform to? The inspection plug is manufactured to DIN 13 with tolerance class 6H, appropriate for ISO metric fine thread acceptance checks. What material is used and how durable is the tool? The plug is made from hardened gauge steel, chosen for abrasion resistance and dimensional stability to withstand repeated engagement cycles. Can this gauge be used for left‑hand threads? This specific item is a right‑hand Go plug; left‑hand versions require the corresponding left‑hand plug gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x1.5 Thread Ring Gauge Metric ISO Fine Right-Hand Hardened Gauge, Calibrated Certificate, DIN 13 6g - Metav IndustryLine
Ensure reproducible thread quality with a calibrated no‑go ring gauge for M90 × 1.5 metric ISO fine threads; the hardened gauge‑steel construction and conformity to DIN 13, tolerance 6g deliver long service life and consistent inspection limits. Order directly via Metav Werkzeuge or consult our specialists for process integration and fast delivery. Thread ring gauge NO‑GO M90 × 1.5 — metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread ring gauge NO‑GO M90 × 1.5 is a hardened ring gauge designed to verify the reject limit on metric ISO fine threads in production and quality control. No‑go ring gauge M90×1.5, metric ISO fine thread Hardened gauge steel for long service life Supplied with calibration certificate (calibrated) Manufactured to DIN 13, tolerance 6g Assured rejection limit for efficient quality control A dedicated no‑go ring gauge sets a clear, objective rejection limit for threaded parts: if the thread enters the ring, the part fails inspection. Built for M90 × 1.5 metric ISO fine threads and produced to DIN 13 with a 6g tolerance, the instrument reduces subjective judgement and shortens inspection time on the shop floor. The hardened construction provides stable geometry under repeated use, which keeps the no‑go threshold consistent and helps prevent costly escapes of non‑conforming components. Traceable calibration that supports quality systems The ring is supplied with a calibration certificate, confirming traceable inspection status at dispatch. This documentation supports internal quality records and audit trails, making the gauge suitable for use in standardised production environments and incoming inspection stations. As the tool arrives calibrated, it is immediately usable for acceptance checks and process control, avoiding initial uncertainty about measuring limits. Robust materials and practical handling for production use Machined from hardened gauge steel, the ring is dimensionally stable and wear‑resistant, which lengthens interval times between re‑calibrations and maintains measurement integrity. The right‑hand thread form is compatible with standard mating parts and fixtures; its solid mass contributes to repeatable seating during inspection. Simple handling and clear go/no‑go logic make this gauge a time‑efficient tool where throughput and reproducibility are essential. Integrating the gauge into inspection routines Use the ring gauge as part of a routine sampling plan to control thread geometry across batches or at final assembly. The binary acceptance principle—pass/fail—supports rapid decisions on corrective action and reduces downstream rework. Combined with documented calibration, the gauge integrates cleanly into existing quality workflows and provides management with measurable evidence of process capability. Metav IndustryLine instruments deliver consistent baseline tools for production quality assurance. Choose Metav IndustryLine's calibrated no‑go ring gauge to standardise thread acceptance criteria and contact Metav Werkzeuge in Emmerich for ordering advice and fast dispatch Technical data Article number: M315.890.6 GTIN: 4054469152936 Weight: 2 kg Thread designation: M90 × 1.5, right‑hand Facts Standard: DIN 13, tolerance 6g Material: hardened gauge steel Customs tariff number: 90173000 Label: AUSSCHUSS (no‑go) Special features Supplied with calibration certificate Intended for metric ISO fine threads Category: gauges / ring gauge Application: quality control, production inspection FAQ What does "AUSSCHUSS" mean on the label? The label indicates a no‑go function: the ring serves as the rejection limit for threaded parts; if the thread enters the ring, the part is out of tolerance. Is a calibration certificate included with the gauge? Yes, the gauge is supplied with a calibration certificate that documents its inspection status at delivery. Can the gauge be used for left‑hand threads? This specific ring is manufactured for right‑hand threads; left‑hand variants must be ordered separately. What standard and tolerance does the instrument follow? The gauge conforms to DIN 13 with a 6g tolerance, suitable for checking metric ISO fine threads. How should the ring gauge be used in production inspection? Use the ring as a binary pass/fail control during sampling or 100% checks; acceptance is determined by whether the mating thread can or cannot fully enter the ring. Which SKU identifies this instrument? The article is listed as M315.890.6 and marketed under Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x2 Metric ISO Fine Thread Go Gauge, Right-Hand, Hardened Plug Gauge With Calibration Certificate - Metav IndustryLine
Reliable process control follows from combining DIN 13, 6H tolerance, hardened gauge steel construction and a supplied calibration certificate; the no-go plug for M90 x 2.0 threads provides unambiguous acceptance criteria for internal metric fine threads. Order the thread plug gauge directly via Metav Werkzeuge or consult the technical team for specification queries. Thread plug gauge NO-GO M90 x 2.0 for metric ISO fine thread (right-hand) — Metav IndustryLine The Thread plug gauge NO-GO M90 x 2.0 is a precision rejection gauge for verifying internal metric fine threads in production and incoming inspection. DIN 13, 6H tolerance class Hardened gauge steel construction Right-hand metric fine thread Supplied with calibration certificate Clear rejection testing that prevents assembly faults The NO-GO plug acts as an objective control for internal threads, ensuring that oversize or out-of-tolerance bores are identified before parts reach assembly. Manufactured to DIN 13, 6H, this rejection gauge is tailored for M90 x 2.0 metric fine threads and is used where a clear negative test is required: the gauge must not enter a conforming thread. As a consequence, the inspection step eliminates ambiguous judgements and reduces downstream rework. The design supports rapid in-line checks and spot inspections on the shop floor while maintaining conformity with standard thread tolerances. Robust construction for reproducible measurements Made from hardened gauge steel, the tool resists wear and keeps dimensional stability across repeated use, supporting consistent inspection results over time. The substantial construction and balanced mass support secure handling during go/no-go tests and reduce the risk of deformation that can compromise measurements. Delivering the gauge with a calibration certificate provides documented traceability of the measurement status at delivery, which aids quality records and audit trails. The right-hand specification is matched to standard production threads, making the tool suitable for workshop, service and production‑control environments. Integration into quality workflows and expected benefits Incorporating this no-go plug into a quality-control routine provides a straightforward, rational measure to prevent non-conforming parts from progressing through the value chain. The instrument supports fast decision-making during incoming inspection and at critical process steps, contributing to lower scrap rates and fewer assembly interruptions. The robust tolerance definition and material choice enable long service life, while the calibration documentation simplifies compliance tasks. For companies seeking reliable thread verification, this gauge offers a pragmatic combination of traceability, durability and unambiguous pass/fail criteria. Contact Metav Werkzeuge for procurement and technical advice on the calibrated NO-GO thread plug gauge M90 x 2.0 supplied with traceable documentation Technical data Article number: M315.690.7 GTIN: 4054469153537 Material: Lehrenstahl, gehärtet Thread: M90x2 Standard: DIN 13, 6H Weight: 2 kg Tariff number: 90173000 Facts Right-hand thread No-go (rejection) function Calibration certificate included Special features Hardened gauge steel Intended for metric ISO fine threads Category: Gauges / Thread plug gauge FAQ What is the purpose of a NO-GO thread plug gauge? A NO-GO thread plug gauge is used to confirm that an internal thread does not exceed the upper tolerance; if the plug enters, the part is rejected. The Thread plug gauge NO-GO M90 x 2.0 serves this precise rejection function for metric fine threads. Is the gauge delivered with calibration documentation? Yes, the gauge is supplied with a calibration certificate so that the Metav IndustryLine threaded plug gauge can be entered into quality records with traceable measurement status. Which thread standard does this gauge comply with? The tool is manufactured to DIN 13, 6H, matching the requirements for metric ISO fine thread tolerance classes and ensuring compatibility with standard thread specifications. Can this gauge be used in production sampling? The robust design and no-go function make it suitable for spot checks and production sampling; the calibrated status supports incorporation into documented quality processes for batch acceptance. What material is the gauge made from and why does it matter? Constructed from hardened gauge steel, the gauge offers wear resistance and dimensional stability, which preserves the accuracy of rejection testing over extended use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x2 Thread Go Plug Gauge For Metric ISO Fine Thread Right-Hand, DIN 13 6H Calibrated Certificate - Metav IndustryLine
Take advantage of traceable inspection with a hardened gauge steel design and DIN‑compliant geometry; the calibrated Go thread plug gauge M90 x 2.0 delivers fast pass/fail checks for metric ISO fine threads while reducing rework and ensuring process stability. Order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. Go Thread Plug Gauge M90 x 2.0 — Metric ISO fine thread, right-hand (Metav IndustryLine) The Go Thread Plug Gauge M90 x 2.0 is a hardened gauge steel GO gauge for direct pass/fail verification of metric ISO fine threads in production and inspection environments. Calibrated with certificate For ISO fine thread M90×2.0 Hardened gauge steel construction Compliant with DIN 13, 6H Reliable inspection for metric fine threads The Go Thread Plug Gauge M90 x 2.0 provides an efficient, objective check of fine‑pitch metric threads, designed to confirm that internal threads meet the DIN 13, 6H form and tolerance. As a Go gauge, it validates the minimum acceptable material condition for threaded holes, enabling quick decisions at the control station and preventing the fitting of undersized or out‑of‑tolerance parts. This measurable gatekeeper reduces scrap rates and avoids downstream assembly issues by ensuring only parts that pass the GO condition continue through production. Designed for repeatability and long life Constructed from hardened gauge steel, the plug gauge offers dimensional stability and wear resistance for repeated checks in workshop and inspection environments. The right‑hand configuration and precise thread geometry make the gauge suitable for routine use on fine‑threaded components; the robust material choice keeps surface deformation to a minimum and preserves gauge accuracy over time. Durable construction therefore lowers the long‑term cost of inspection by extending service intervals and maintaining reliable go/no‑go results. Fits into quality workflows with traceable calibration Delivered with a calibration certificate, this plug gauge supports documented quality processes and traceability requirements for inspection equipment. The clear GO/NO‑GO function streamlines operator tasks and integrates easily into routine incoming inspection and in‑process control plans. Supplied by Metav IndustryLine, the gauge benefits from a European distribution and quality filter in Emmerich, simplifying procurement for workshops and inspection labs that require dependable measurement artefacts and consistent supply. For assured thread verification and integration into existing inspection plans, request the Metav IndustryLine Go thread plug gauge M90 x 2.0 with calibration certificate from Metav Werkzeuge and receive tailored advice on application and storage. Technical data Article number: M315.590.7 GTIN: 4054469153155 Description: Go thread plug gauge, right‑hand Thread size: M90 x 2.0 Weight: 2 kg eClass: 21170228 Material: hardened gauge steel Norm: DIN 13, 6H Tariff number: 90173000 Calibrated: calibration certificate included Brand: Metav IndustryLine Category: Lehren / Messstifte FAQ What tolerance standard does this gauge verify? The Go Thread Plug Gauge M90 x 2.0 verifies thread geometry to DIN 13, 6H for metric ISO fine threads and serves as a GO check against the specified minimum material condition. Is a calibration certificate supplied with the gauge? Yes, the Go Thread Plug Gauge M90 x 2.0 is supplied with a calibration certificate, providing documented traceability for inspection records. Can this gauge be used for left‑hand threads? No, the Go Thread Plug Gauge M90 x 2.0 is manufactured for right‑hand threads only and must not be used for left‑hand thread checks. What material is the gauge made from and how does that help? The gauge is made from hardened gauge steel; this material offers stability and wear resistance, helping the Go Thread Plug Gauge M90 x 2.0 maintain accuracy through repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x2 Thread Go Ring Gauge ISO Metric Fine Pitch Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a rapid go/no‑go inspection method with a hardened gauge steel construction and DIN‑rated tolerance to keep production inline. Supplied with a calibration certificate, the gauge supports traceable quality control and can be ordered or discussed directly via Metav Werkzeuge. Go thread ring gauge M90 x 2.0 (metric ISO fine thread), right‑hand — Metav IndustryLine The Go thread ring gauge M90 x 2.0 is a precision tool for quick acceptance testing of right‑hand metric ISO fine threads in production and inspection environments. Go ring gauge for M90 x 2.0 metric threads Hardened gauge steel construction Manufactured to DIN 13 tolerance 6g Supplied with calibration certificate Fast, reliable go/no‑go inspection on the shop floor A Go/No‑Go procedure reduces inspection time and simplifies routine checks: the Go gauge confirms whether an external thread falls within the permitted tolerance for an M90 x 2.0 pitch, permitting immediate pass/fail decisions at the line. This rapid verification method prevents unnecessary rework, shortens uptime losses and integrates smoothly into established quality routines. The gauge’s clear functional purpose — immediate acceptance testing — makes it a pragmatic choice for quality control teams and shop‑floor technicians who require unambiguous results without elaborate setup. Robust construction for repeatable measurements and longevity Manufactured from hardened gauge steel and produced to DIN 13 with a 6g tolerance class, the ring delivers consistent contact geometry and wear resistance under repetitive use. The material selection and heat treatment reduce profile distortion and preserve dimensional fidelity over many cycles, which supports reproducible measurements and predictable service intervals. Built for industrial environments, the design focuses on mechanical stability so that repeatability is governed by the part and process rather than the gauge itself, helping maintain measurement confidence across shift changes and multiple operators. Traceable calibration for audit‑ready inspection The tool is supplied with a calibration certificate, ensuring documented traceability from delivery. A certified gauge enables quality documentation to show conformity during audits and supports process validation activities. For manufacturers and inspection departments that must demonstrate control of measuring equipment, a calibrated GO gauge forms a simple but effective element of measurement assurance. The combination of standard conformity, calibration documentation and a robust mechanical design means the gauge is ready for immediate integration into existing inspection plans and batch acceptance protocols. Contact Metav Werkzeuge for detailed compatibility checks and certified delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 — discuss the M90 GO gauge (SKU M315.790.7) and its fit for specific production requirements Technical data Article number: M315.790.7 GTIN: 4054469153742 Material: gauge steel, hardened Type: Go thread ring gauge (right‑hand) Facts Thread size: M90 x 2.0 Tolerance: DIN 13, 6g Weight: 2 kg Tariff number: 90173000 Special features Supplied with calibration certificate Metric ISO fine thread, right‑hand Manufacturer: Metav IndustryLine FAQ What is the primary use of this ring gauge? The Go thread ring gauge M90 x 2.0 is used for quick acceptance testing of external threads, providing an immediate go/no‑go decision in production and inspection processes. Which standard and tolerance does the gauge comply with? The gauge is manufactured to DIN 13 with a tolerance class of 6g, suitable for metric ISO fine thread verification. Is a calibration certificate included with delivery? Yes, the tool is supplied with a calibration certificate, ensuring traceability and documentation for inspection records. Can this gauge be used directly on the shop floor without further preparation? The M90 GO gauge from Metav IndustryLine (SKU M315.790.7) is delivered ready for use and intended for routine production checks once placed into service. Who should consider this gauge for their inspection equipment? Quality managers, inspection technicians and production engineers who require efficient, standard‑compliant thread acceptance testing will find this ring gauge suitable. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x2 Thread Go/No-Go Ring Gauge Metric ISO Fine Thread Right-Hand Hardened Gauge, DIN 13 6g, Cal Cert - Metav IndustryLine
Take advantage of a hardened gauge-steel design and a supplied calibration certificate for reliable, repeatable thread inspection; the M90×2 right‑hand ring gauge helps maintain production quality and traceability — order directly via Metav Werkzeuge or consult our specialists for delivery options. Thread Ring Gauge AUSSCHUSS M90×2 — hardened gauge steel, DIN 13, 6g (Metav IndustryLine) The Thread Ring Gauge AUSSCHUSS M90×2 is a right‑hand metric ISO fine‑thread master gauge for go/no‑go verification in production and incoming‑goods inspection Hardened gauge steel, wear resistant Calibrated with certificate included Conforms to DIN 13 tolerance 6g Precision inspection that fits industrial workflows The M90×2 ring provides a clear, rational basis for pass/fail decisions on fine metric threads. Built to DIN 13 with tolerance class 6g, the gauge performs the fundamental go/no‑go check used throughout machining and assembly operations. Machinists and quality engineers benefit from a compact, single‑purpose tool that eliminates subjective judgement during thread acceptance and supports stable throughput in serial production. Robust construction for fewer interruptions Manufactured from hardened gauge steel, this ring is designed for long‑term wear resistance and consistent fit over many cycles. The right‑hand configuration and the solid construction reduce the need for replacement, while the moderate mass contributes to secure handling during inspection. The result is improved uptime: fewer tool changes, less rework and a measurably steadier process flow where reproducible thread checks are required. Traceable calibration to support quality systems Supplied with a calibration certificate, the gauge documents measurement traceability and supports routine quality audits and inspection records. The included certificate enables simple integration into control plans and inspection protocols without additional paperwork. Supported by Metav’s quality filtering in Emmerich, the delivery combines practical workshop readiness with assured documentation for traceability and compliance. For a traceable, workshop‑ready solution for M90×2 thread inspection, contact Metav Werkzeuge in Emmerich to discuss supply and delivery of the AUSSCHUSS ring gauge and available options. Technical data Article number: M315.890.7 GTIN: 4054469153957 Material: gauge steel, hardened Mass: M90x2 Weight: 2 kg Standard: DIN 13, 6g Facts Right‑hand metric fine thread Go / no‑go verification Calibrated with certificate included Special features Label: AUSSCHUSS (special inspection status) Tariff number: 90173000 Category: Gauges / Thread gauges FAQ What standard and tolerance class does this ring follow? The ring is manufactured to DIN 13 with tolerance class 6g, providing standardised criteria for metric ISO fine‑thread acceptance. Is a calibration certificate supplied with the gauge? Yes, the AUSSCHUSS M90×2 ring gauge is supplied with a calibration certificate to document traceability and support quality records. Which manufacturer and SKU correspond to this item? This gauge is offered by Metav IndustryLine and is listed under SKU M315.890.7. What is the intended use for this thread ring gauge? The gauge is intended for go/no‑go inspection of right‑hand M90×2 metric ISO fine threads in production and incoming goods inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x3 Thread Go Plug Gauge Metric Fine Pitch Right-Hand Calibrated, DIN 13 6H - Metav IndustryLine
Take advantage of a hardened gauge-steel construction, conformity to DIN 13 (6H) and delivery with a traceable calibration certificate to ensure reliable thread inspection and faster go/no-go decisions on the shop floor. Order the gauge directly via Metav Werkzeuge or consult our technical advisors for application support. Thread plug gauge (Go) M90×3 — right-hand, DIN 13 (6H) by Metav IndustryLine A Thread plug gauge (Go) for verification of right-hand metric ISO fine threads, designed for production and quality control in mechanical engineering and toolmaking. Calibrated with certificate Hardened gauge steel construction DIN 13, tolerance class 6H Suitable for M90 × 3 metric fine thread Robust verification that prevents assembly errors The Go plug gauge provides a quick, unambiguous check of internal threads, enabling rapid acceptance or rejection without complex setup. Manufactured from hardened gauge steel, the gauge resists wear and maintains dimensional stability across repeated use, which reduces the need for frequent replacements and supports consistent assembly quality. Conformity to DIN 13 and the 6H tolerance class ensures interoperability with standard ISO fine-threaded components, allowing this tool to be integrated seamlessly into existing incoming‑part inspections or in‑line process checks. Traceable calibration for dependable quality decisions Delivered with a calibration certificate, the gauge is ready for immediate use in quality-controlled environments where measurement traceability is required. The test certificate documents the inspection status and supports audit trails, helping to demonstrate compliance during supplier audits or internal quality reviews. This measurable traceability reduces uncertainty in acceptance sampling and strengthens confidence when passing components to downstream assembly processes. Designed for efficient shop-floor workflows Compact handling and a clear go/no‑go outcome speed up inspection throughput, cutting the time spent on each threaded part and decreasing production bottlenecks. The tool’s M90 × 3 specification targets fine-thread applications common in heavy‑duty fastenings and precision assemblies, while the right‑hand orientation matches standard thread directions to avoid misapplication. Robust construction and standard compliance contribute to lower total cost of ownership by reducing rework, scrap and unplanned stoppages. Contact Metav Werkzeuge today for tailored advice on integrating this Metav IndustryLine plug gauge into existing inspection routines and to arrange delivery or technical consultation Technical Data Article number: M315.590.8 GTIN: 4054469154145 Weight: 2 kg Material: hardened gauge steel Thread size: M90 × 3 Orientation: right-hand Standard: DIN 13, 6H Delivered with calibration certificate Facts Nominal diameter: 90 mm Thread pitch: 3 mm Tariff number: 90173000 Special features Go (acceptance) plug gauge design Calibrated on delivery (certificate included) Suitable for metric ISO fine threads Robust, wear‑resistant hardened steel FAQ What is this gauge used for? The thread plug gauge is a Go‑type acceptance tool for verifying internal metric ISO fine threads; the Metav IndustryLine Go plug gauge M90×3 checks whether an internal M90 × 3 right‑hand thread meets the DIN 13, 6H specification. Does the gauge arrive ready for use in quality inspections? Yes, the gauge is supplied with a calibration certificate, so the M90×3 Metav IndustryLine gauge can be put into documented inspection routines immediately. Which material is the gauge made from and why does it matter? The gauge is made from hardened gauge steel; this wear‑resistant material preserves the gauge geometry under frequent use, ensuring repeatable go/no‑go assessments and extended service life. Can this gauge be used for production control on large components? The M90×3 size targets larger fine‑thread applications typically found in heavy assemblies; the Go plug gauge supports fast, unequivocal checks during incoming inspection and in‑process control. How does compliance with DIN 13 benefit measurement processes? Compliance with DIN 13 and tolerance class 6H guarantees that the plug gauge corresponds to internationally recognised thread definitions, simplifying acceptance criteria and ensuring compatibility with standard threaded parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x3 Thread Go/No-Go Plug Gauge For Metric ISO Fine Thread, Right-Hand, Calibrated Certificate, DIN 13 6H - Metav IndustryLine
Take advantage of the combination of precision, robust hardened gauge steel and a supplied calibration certificate for reliable go/no‑go inspection of metric fine threads; order directly via Metav Werkzeuge or consult the technical advisors for application support. Thread plug gauge (NO‑GO) M90 x 3.0 for metric ISO fine thread, right-hand — Metav IndustryLine A thread plug gauge (NO‑GO) M90 x 3.0 designed for rapid acceptance testing of metric ISO fine threads in production and incoming‑goods inspection. Thread plug gauge M90 x 3.0, right-hand Hardened gauge steel construction DIN 13 tolerance zone 6H Supplied with calibration certificate Faster, simpler go/no‑go checks for production control The plug gauge serves as a direct, tactile inspection tool that replaces time‑consuming measuring sequences with a clear pass/fail result. By using a NO‑GO plug gauge matched to M90 x 3.0, dimensional conformity of internal threads is determined instantly, which streamlines quality control and reduces non‑value‑adding measurement time. The clear binary outcome supports faster throughput in assembly lines and prevents faulty threads from progressing through production. Durable construction and traceable calibration for consistent results Manufactured from hardened gauge steel, the gauge withstands repeated use while maintaining gauge accuracy and surface integrity. The device is delivered with a calibration certificate, providing documented traceability for audits and supplier quality agreements. The robust material choice and traceable calibration together reduce measurement uncertainty and support repeatable inspections under shopfloor conditions. Standards compliance and suitability for metric fine threads The geometry conforms to DIN 13, tolerance position 6H, which ensures interchangeability with metric ISO fine‑threaded components and compatibility with accepted inspection routines. As a dedicated NO‑GO control, the gauge enforces the upper limit for internal thread tolerance and helps maintain assembly reliability. The compact, purpose‑built design makes it suitable for bench checking, incoming goods inspection and routine sampling in production environments. For assured acceptance testing, request the Metav IndustryLine M90 x 3.0 NO‑GO thread plug gauge from Metav Werkzeuge—technical advisors can confirm suitability for specific applications and will supply the calibrated gauge with certificate; contact info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M315.690.8 GTIN: 4054469154336 Weight: 2 kg Material: gauge steel, hardened Thread: M90 x 3.0, right-hand Standard: DIN 13, 6H Category: Lehren (gauges); Messstifte (measuring pins) Facts Nominal diameter: 90 mm Pitch: 3.0 mm Weight: 2 kg Customs tariff number: 90173000 Special features Rejection gauge (NO‑GO) Delivered with calibration certificate Hardened gauge steel construction Right‑hand metric fine thread Intended for production and incoming inspection FAQ What is the main purpose of this plug gauge? The thread plug gauge M90 x 3.0 is intended for quick go/no‑go verification of internal metric ISO fine threads; it gives an immediate accept/reject result during production and incoming‑goods checks. Does the gauge come with documented calibration? Yes, the gauge is supplied with a calibration certificate that documents traceability and supports audit requirements for the M90 x 3.0 NO‑GO plug gauge. Which standard does the plug gauge conform to? The geometry complies with DIN 13 and the tolerance position 6H, ensuring compatibility with metric ISO fine‑thread specifications. What material is the gauge made from? The tool is made of hardened gauge steel to provide long service life and stable measuring characteristics under repeated use. Can this gauge be used for left‑hand threads or as a GO gauge? This specific item is a right‑hand NO‑GO plug gauge for M90 x 3.0; a GO gauge or left‑hand variant would be a different article and should be requested separately. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x3 Thread Ring Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge, DIN 13 6g Calibrated Certificate - Metav IndustryLine
Take advantage of a robust inspection tool that combines repeatable conformity, hardened construction and a traceable calibration certificate to streamline thread checks and reduce assembly rework. Order the gauge directly via Metav Werkzeuge or consult the Metav team for specification matching. Gewinde-Lehrring GUT M90 x 3.0 — GO thread ring gauge, right-hand, metric ISO fine thread, Metav IndustryLine A Gewinde-Lehrring GUT M90 x 3.0 designed as a GO thread ring gauge for fast verification of metric ISO fine threads in production and incoming inspection. GO thread ring for M90 x 3 Hardened gauge steel construction Conforms to DIN 13, tolerance 6g Supplied with calibration certificate Ensure correct fit with a standardised GO check A GO thread ring gauge provides an immediate, binary result for thread acceptance; the GO thread ring gauge confirms that an internal or external counterpart will assemble without interference. Manufactured to DIN 13 with the 6g tolerance class, this gauge reduces measurement ambiguity and supports consistent batch release decisions. The clear pass/fail nature of a GO gauge shortens inspection time compared with dimensional measuring routines and lowers the risk of downstream rework or warranty claims. Built for durability and traceability in the workshop Made from gauge steel and precisely hardened, the ring resists wear from repeated engagement, ensuring dimensional stability over many cycles. The hardened construction translates directly into longer service life and fewer replacements, which reduces total cost of ownership in a busy shop environment. Delivery includes a calibration certificate, providing traceability and documentation for quality management systems and internal audits. Integrates with existing quality processes and traceability The ring is intended for production and incoming‑goods inspection where metric ISO fine threads are specified; its M90×3 sizing and right‑hand profile match common component standards. Use of a dedicated GO gauge simplifies operator training and standard operating procedures, and the instrument’s straightforward action supports rapid throughput on inspection benches. For procurement and inventory, refer to article number M315.790.8 as a concise identifier when ordering or logging the item. Choose the Metav IndustryLine GO thread ring gauge for reliable, repeatable thread acceptance and contact Metav Werkzeuge in Emmerich for specification advice or to confirm suitability for specific assemblies Technical Data Article number: M315.790.8 GTIN: 4054469154527 Manufacturer: Metav IndustryLine Facts Thread size: M90 x 3.0 Thread type: Metric ISO fine thread, right‑hand Tolerance class: DIN 13, 6g Weight: 2 kg Special features Material: Gauge steel, hardened Calibration: Supplied with calibration certificate Tariff number: 90173000 Condition: GO gauge FAQ What is the primary purpose of this thread ring gauge? The gauge serves as a GO check for metric ISO fine threads; the Gewinde‑Lehrring GUT M90 x 3.0 confirms that mating parts will assemble without interference. Does the ring comply with recognised standards? Yes, the gauge is manufactured to DIN 13 with a 6g tolerance class to match standard metric ISO fine thread specifications. Is a calibration document supplied with the gauge? A calibration certificate is supplied with the Metav IndustryLine GO thread ring gauge and accompanies the delivered item for traceability. Can this gauge be used for left‑hand threads? This specific ring is produced for right‑hand threads; left‑hand versions must be ordered separately to match thread direction. How should the gauge be handled to preserve accuracy? Handle the ring with care, keep it clean and store it in a dry, secure location; periodic recalibration is recommended according to internal quality schedules. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x4 Thread Gauge, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of precise GO verification, hardened gauge steel construction and an included calibration certificate for reliable, repeatable thread inspection; order the gauge directly via Metav Werkzeuge or consult our specialists for application support. Thread Ring Gauge GO M90 x 4.0 — Right-hand, DIN 13 (6g) — Metav IndustryLine The Thread Ring Gauge GO M90 x 4.0 is a right-hand GO ring gauge designed to check metric ISO fine threads to DIN 13 (6g) in production, incoming inspection and laboratory settings GO ring for metric ISO fine threads Hardened gauge steel for long service life Includes calibration certificate Conforms to DIN 13 tolerance 6g Ensure process reliability with traceable GO checking The Thread Ring Gauge GO M90 x 4.0 provides a fast, objective pass/fail check that reduces inspection time and eliminates subjective judgement. Built from hardened gauge steel, the ring resists wear and maintains form accuracy over many cycles, which preserves the thread limit for longer and reduces rework. Conformance to DIN 13 (6g) offers a recognised tolerance class for fine metric threads, enabling straightforward acceptance criteria in production control and supplier inspection. The GO-only topology is ideal where a definitive acceptance check is required at speed. Built-in traceability and quality assurance for audit-ready inspection Delivery includes a calibration certificate, ensuring documented traceability and simplified quality records for internal audits. Calibration documentation supports consistent measurement outcomes and helps integrate the gauge into quality-management processes. The combination of a GO check and certified calibration reduces the need for repeated crossover checks, supporting lean inspection routines while maintaining compliance with internal and customer standards. Practical handling, compatibility and long-term value The right-hand metric construction suits typical fastener production and verification workflows and integrates easily with established inspection benches. The compact, robust design offers straightforward handling during GO trials and is compatible with standard thread plug gauge storage and protection practices. With a stable material choice and certified calibration, the gauge fosters confidence in routine sampling and incoming inspection, helping to prevent assembly issues caused by out-of-spec threads. Request a quote from Metav Werkzeuge for the M90 GO thread ring gauge or ask our consultants to discuss suitability for existing inspection plans; Metav Werkzeuge supports application selection from its Emmerich quality hub Technical Data Article number: M315.790.9 GTIN: 4054469155258 Weight: 2 kg Material: hardened gauge steel Thread size: M90 x 4.0 Norm: DIN 13, 6g Type: GO (GUT) ring Right-hand thread Calibration certificate included Facts Size: M90 x 4.0 Weight: 2 kg Tariff number: 90173000 eClass: 21170214 Special features Hardened gauge steel Metric ISO fine thread compatibility Right-hand orientation DIN 13 tolerance class 6g Calibration certificate supplied Manufacturer: Metav IndustryLine FAQ What does the GO designation mean for this thread ring gauge? The GO designation indicates a limit gauge that verifies whether an external thread fits within the maximum material limit; the Thread Ring Gauge GO M90 x 4.0 (Metav IndustryLine, SKU M315.790.9) performs this single, decisive acceptance check. Is a calibration document included with delivery? Yes, the gauge is supplied with a calibration certificate, which documents the measurement state and supports traceability for quality records with the Metav IndustryLine thread ring gauge. Which tolerance and standard does the gauge follow? The ring adheres to DIN 13 with tolerance class 6g, making it suitable for metric ISO fine-thread acceptance where that standard is specified. Can the gauge be used for left-hand threads? This particular gauge is right-hand; left-hand checks require a corresponding left-hand ring. The current item is specifically a right-hand GO ring for M90 x 4.0 threads. How should the ring be maintained to preserve accuracy? Store the ring in a dry, protected case and avoid impact or contamination; periodic recalibration and gentle cleaning will maintain performance of the hardened gauge steel ring. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x4 Thread Go Gauge Metric ISO Fine Pitch Right-Hand Hardened Gauge Steel, Calibrated Certificate, DIN 13 6H - Metav IndustryLine
Precision assured by hardened gauge steel and DIN‑13 tolerance: the GO plug offers reliable acceptance checks for metric fine threads. Supplied with a calibration certificate, this gauge simplifies quality control and documentation. Order or request application advice directly from Metav Werkzeuge for a rapid, informed procurement decision. Thread plug GO gauge M90 x 4.0 — Metric ISO fine thread, right‑hand (Metav IndustryLine) The Thread plug GO gauge M90 x 4.0 is a hardened right‑hand plug gauge for acceptance testing of metric ISO fine threads to DIN 13 (6H), suited to workshop and inspection use. GO plug for M90 x 4.0 metric fine threads Hardened gauge steel for robust use Delivered with calibration certificate Faster acceptance testing with a GO plug that signals conformity A GO plug offers an immediate, objective check: if the plug enters the thread, the feature meets the specified DIN 13 (6H) tolerance. For production and incoming inspection this reduces measurement time and the need for elaborate gauging setups. The M90 × 4.0 size is optimised for fine‑thread applications where quick pass/fail decisions maintain throughput and minimise rework, ensuring traceable results when paired with the supplied calibration certificate. Built for durability and repeatability in daily inspection tasks Constructed from hardened gauge steel, the gauge resists wear and keeps its form under repetitive use. That material choice ensures dimensional stability and longevity, so routine checks remain consistent over many cycles. The plug design and robust construction also help to avoid damage to the inspected threads during verification, supporting reproducible outcomes and fewer false rejections in production control. Clear specification and practical integration in quality workflows The right‑hand orientation and the clear designation as a GO gauge make the tool straightforward to integrate into standard inspection benches and go/no‑go stations. Supplied with documentation, the gauge supports record‑keeping and audit trails commonly required in industrial quality systems. Its simple function complements more detailed metrology where required, serving as a rapid frontline measure before in‑depth dimensional analysis. Contact Metav Werkzeuge to check compatibility with your production process and to request delivery details for the Metav IndustryLine M90 x 4.0 GO plug with calibration certificate Technical data SKU: M315.590.9 GTIN: 4054469154893 Article: Thread plug GO gauge M90 x 4.0 Weight: 2 kg Core specifications Thread size: M90 × 4.0 Tolerance class: 6H Standard: DIN 13 Tariff number: 90173000 eClass: 21170228 Materials & features Gauge steel, hardened Right‑hand thread GO (plug) gauge for acceptance testing Supplied with calibration certificate FAQ What does the GO designation mean for this gauge? The GO designation indicates a plug gauge that must enter the thread if the M90 × 4.0 feature conforms to the specified tolerance; the Thread plug GO gauge M90 x 4.0 is intended for straightforward accept/reject checks. Is the gauge traceable for quality records? Yes, the gauge is supplied with a calibration certificate, providing traceability and documentation suitable for quality systems and production records when using the Metav IndustryLine plug. Which standard does this thread gauge follow? This plug is manufactured for metric ISO fine threads in accordance with DIN 13, tolerance class 6H, which is stated for the M90 × 4.0 thread size. Can the gauge be used in a production environment for frequent checks? The hardened gauge steel construction and simple plug design make it appropriate for frequent acceptance checks on the production floor, reducing inspection time and ensuring consistent pass/fail decisions. Does this product verify left‑hand threads? No, this item is a right‑hand GO plug for metric ISO fine threads; left‑hand thread gauges are available separately and must be specified as such. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x4 Thread Go/No-Go Plug Gauge Metric ISO Fine Right-Hand Hardened Gauge With Calibration Certificate, DIN 13 6H - Metav IndustryLine
Robust conformity checking for metric fine threads combined with hardened gauge‑steel construction ensures repeatable inspection results and reduced rework. Supplied with a calibration certificate and manufactured to DIN 13 tolerance 6H, order this gauge directly via Metav Werkzeuge or consult their specialists for application advice. Thread plug gauge M90 x 4.0 (reject) — right‑hand, DIN 13 tolerance 6H (Metav IndustryLine) Thread plug gauge M90 x 4.0 (reject) is a right‑hand inspection gauge designed to verify metric ISO fine threads quickly and reliably in production and incoming‑inspection environments Hardened gauge steel construction DIN 13 — tolerance 6H Supplied with calibration certificate Right‑hand M90 x 4.0 metric fine thread Ensure conformity where fine threads matter The Thread plug gauge M90 x 4.0 (reject) provides a rapid, objective check of metric ISO fine threads to the DIN 13 specification with tolerance class 6H. Using a dedicated plug gauge removes subjective judgement from go/no‑go checks and thereby shortens inspection cycles; this rational approach reduces the rate of faulty assemblies and costly rework. The gauge’s nominal M90 x 4.0 geometry is specified as a direct verification tool for fine‑pitch components, so typical applications include valve bodies, gearbox housings and other precision housings where thread fit and tolerance adherence are critical. Durable construction for repeatable results Manufactured from hardened gauge steel, the plug gauge is dimensionally stable and resistant to wear under regular use, which maintains measurement integrity over many cycles. The right‑hand thread form matches common machining outputs and supports consistent tactile feedback during inspection. Such robustness translates into fewer replacements and predictable downtime planning — a practical benefit that improves shop‑floor throughput. The gauge’s mass and form factor give a secure handling experience on inspection benches, supporting fast, repeatable checks without elaborate fixtures. Traceable calibration and practical application notes Supplied with a calibration certificate, this plug gauge arrives ready for immediate use in quality control and can be integrated into documented inspection routines. The certificate documents traceability and initial conformity; for regulated environments this eases auditability and decision making. Use the gauge as a handheld go/no‑go device at workstations or as part of a bench inspection routine; where more extensive traceability is required, the calibration data can be filed alongside batch inspection records. For complex thread systems or borderline fits, Metav Werkzeuge’s technical team can advise on suitable inspection strategies and complementary measuring equipment. Contact Metav Werkzeuge to confirm suitability for specific components and to arrange supply from Emmerich’s central quality hub Technical data Article number: M315.690.9 GTIN: 4054469155074 Designation / Size: M90 x 4.0 Material: gauge steel, hardened Standard: DIN 13, 6H Weight: 2 kg Customs tariff number: 90173000 Supplied with calibration certificate Thread direction: right‑hand Numbers / Core technical data Nominal diameter: 90 mm Pitch: 4.0 mm Tolerance class: 6H Weight: 2 kg GTIN: 4054469155074 Special features Right‑hand metric ISO fine thread verification Hardened gauge‑steel construction for wear resistance Delivered with calibration certificate for traceability Intended for go/no‑go inspection of internal threads Category: Thread plug gauge / Gauges FAQ What thread standard does this gauge verify? The gauge checks metric ISO fine threads to DIN 13 with tolerance class 6H, making it suitable for standardised thread conformity checks. Is the gauge delivered ready for use with traceable calibration? Yes, the plug gauge is supplied with a calibration certificate, documenting initial verification and traceability for quality records. Which thread size and pitch are covered by this tool? The tool is nominally M90 x 4.0, intended for inspection of right‑hand metric fine threads of that size. What material is the gauge made from and how does that affect performance? Made from hardened gauge steel, the gauge resists wear and maintains dimensional stability, ensuring repeatable go/no‑go checks over long service intervals. Can this gauge be used for left‑hand threads? This item is a right‑hand plug gauge; left‑hand threads require a dedicated left‑hand gauge designed to match the opposite thread helix. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x4 Thread Ring Gauge, Go/No-Go For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of reliable, repeatable inspection and straightforward traceability for consistent thread quality control; the product arrives with a calibration certificate and can be ordered directly via Metav Werkzeuge or discussed with our consultants. No-go thread ring gauge M90 x 4.0 (right-hand) – Metav IndustryLine A no-go ring gauge for metric ISO fine threads, designed for rapid assessment of M90 x 4.0 right-hand external threads in production and inspection environments. No-go ring gauge M90 x 4.0 right-hand Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13 tolerance class 6g Guaranteeing thread conformity with a single test The no-go ring gauge is a rapid, unambiguous tool for thread inspection in series production. As a dedicated reject gauge, it verifies whether external threads exceed the upper tolerance limit: if the ring does not assemble onto the thread, the part conforms; if it fits, the thread is out of tolerance and must be rejected or reworked. This simple go/no-go principle streamlines quality control, reduces inspection time and eliminates subjective interpretation, making the gauge particularly suited to high-throughput metalworking and assembly operations. Built for durability and standards-based accuracy Manufactured from hardened gauge steel, this ring gauge resists wear and preserves dimensional integrity through many inspection cycles. It is produced to DIN 13 with tolerance class 6g, ensuring compatibility with standard metric ISO fine-thread specifications. The construction and finish make it robust against handling in workshop and shop-floor conditions while maintaining the precision required for reliable pass/fail decisions. Supplied with a calibration certificate, the gauge provides documented traceability for audits and quality records. Practical integration into inspection routines Using a dedicated reject gauge simplifies process control: inspection personnel obtain immediate, binary results and can segregate non-conforming parts without time-consuming measurements. The gauge’s size — M90 x 4.0 — and right-hand orientation match common fine-thread applications in heavy assemblies and mechanical components. For production planners and quality engineers, the gauge reduces cycle-time per inspection and supports consistent lot acceptance criteria, contributing to lower rework rates and improved throughput across machining and assembly stages. Discuss purchase and application options with Metav Werkzeuge — our specialists can advise on integrating this Metav IndustryLine no-go ring gauge into existing quality workflows and arrange prompt delivery from Emmerich. Technical data Article number: M315.890.9 GTIN: 4054469155432 Nominal size: M90 x 4.0 Thread hand: right-hand Material: Gauge steel, hardened Standard: DIN 13, 6g Weight: 2 kg Customs tariff number: 90173000 Supplied with calibration certificate Core specifications Type: No-go (reject) thread ring gauge Intended use: External thread verification Tolerance class: 6g (DIN 13) Mass/size designation: M90 x 4.0 Special features Hardened construction for long service life Rapid go/no-go inspection principle Traceable calibration document included FAQ What is the primary function of this ring gauge? The ring gauge is a no-go (reject) thread ring gauge M90 x 4.0 used to check whether external threads exceed the permissible maximum material condition; it provides a clear pass/fail result for each part. Which standards and tolerance class apply to this gauge? This gauge is manufactured to DIN 13 and matches tolerance class 6g, suitable for metric ISO fine threads of the specified size. Is a calibration certificate provided with the gauge? Yes, the gauge is supplied with a calibration certificate, giving traceable documentation for quality control and audit purposes. What material is the gauge made from and why does that matter? The gauge is made from hardened gauge steel, chosen for wear resistance and dimensional stability so that inspection results remain reliable over many cycles. For which thread direction is this gauge intended? The device is manufactured for right-hand external threads at size M90 x 4.0. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x6 Thread Gauge Ring Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of traceable calibration, hardened gauge‑steel construction and DIN‑conformity for reliable go/no‑go inspection; order the calibrated gauge directly via Metav Werkzeuge or consult our specialists for application advice. Thread ring gauge GUT M90 x 6.0 — GO gauge, right‑hand, hardened gauge steel (Metav IndustryLine) The Thread ring gauge GUT M90 x 6.0 is a right‑hand GO gauge for metric ISO fine threads, intended for serial inspection and acceptance testing in production and incoming‑goods inspection. Calibrated delivery with certificate Hardened gauge‑steel construction Conforms to DIN 13, tolerance 6g For metric ISO fine thread M90 x 6, right‑hand Consistent GO/no‑GO control that speeds up inspection A dedicated GO gauge provides an unambiguous pass/fail criterion that reduces decision time at the inspection bench. Supplied with a calibration certificate, this master gauge documents traceability for audit purposes and supports quality systems; the short verification cycle replaces lengthy measurement protocols when a simple conformity check is appropriate. The M90 x 6 size and the DIN 13 6g tolerance class ensure the gauge matches standard metric fine‑thread specifications used in mechanical assemblies, so inspection results are directly comparable to design requirements. Robust construction for everyday workshop and production use Manufactured from hardened gauge steel, the gauge resists wear and keeps its functional limit diameters stable under frequent handling. The material choice and heat treatment produce a dimensionally stable tool that maintains its acceptance limits longer than softer alternatives, reducing the need for early replacement. The right‑hand threading form and the nominal M90 x 6 profile mean the gauge is ready for direct deployment on inspection fixtures, assembly stations or in goods‑in testing without additional adaptation. Practical benefits for quality management and traceability Adopting a calibrated ring gauge for routine checks lowers the administrative burden of full dimensional reports while preserving traceability: the supplied certificate documents the condition of the gauge at delivery and can be archived as part of the control plan. For production sites aiming to streamline workflow, the GO‑only control provided by this gauge shortens inspection time and increases throughput without compromising the clarity of acceptance criteria. The gauge’s clear pass/fail function also reduces interpretation variance between operators, supporting consistent decisions across shifts and locations. Contact Metav Werkzeuge to secure the calibrated Metav IndustryLine GO gauge for your inspection bench or to discuss suitability for specific thread applications Technical data Article number: M315.790.A SKU: M315.790.A GTIN: 4054469155821 Thread size: M90 x 6 Standard: DIN 13, 6g Material: hardened gauge steel Weight: 2 kg Tariff code: 90173000 Delivery: with calibration certificate Facts Tolerance class: 6g Thread form: metric ISO fine thread, right‑hand Calibration: supplied (calibration certificate included) Gauge type: GO (GUT) Special features Designed for serial inspection and acceptance testing Durable hardened gauge‑steel construction Traceable calibration documentation included Compact, ready‑to‑use GO limit gauge FAQ What inspection role does a GO gauge serve compared with measurement with calipers or micrometres? A GO gauge provides an immediate go/no‑go decision that is faster than full dimensional measurement; the Thread ring gauge GUT M90 x 6.0 confirms whether a threaded part falls within the specified tolerance limits without producing a dimensional value. Is a calibration certificate included with delivery? Yes, the gauge is supplied with a calibration certificate, documenting its condition at the time of delivery and allowing the gauge to be used in quality systems that require traceability. To which standard does the gauge conform? The ring gauge matches DIN 13, 6g for metric ISO fine threads, making it suitable for inspection tasks where that standard is specified. Can the gauge be used for functional tests on assembled parts? The GO gauge is intended for verification of thread acceptability; it is suitable for functional checks where the criterion is thread fit within the 6g acceptance limits. How should the gauge be handled to preserve accuracy? Treat the gauge as a precision limit instrument: avoid impacts, keep it clean and dry, and store it in a protective box when not in use; periodic recalibration is recommended according to the site’s quality plan. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x6 Thread Go Gauge For Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6g, Calibrated - Metav IndustryLine
Take advantage of a robust inspection tool that combines hardened gauge steel construction, precise DIN conformity and a supplied calibration certificate to streamline thread verification in production. Order the item directly via Metav Werkzeuge or consult the technical specialists for application advice. Thread ring gauge REJECT M90 x 6, right-hand (Metav IndustryLine) — hardened gauge steel, DIN 13 (6g) Thread ring gauge REJECT M90 x 6, right-hand (Metav IndustryLine) is intended for quick validation of right-hand M90×6 metric ISO fine threads in manufacturing and incoming inspection. Right-hand M90 x 6 metric fine thread Hardened gauge steel construction Supplied with calibration certificate Conforms to DIN 13, 6g Reliable, shop-ready thread verification that reduces downtime This ring gauge is designed for immediate use on the shop floor and in quality inspection stations. The M90×6 size and right-hand orientation address fine-threaded components commonly found in precision assemblies. Manufactured from hardened gauge steel, the gauge resists wear and maintains a stable reference form, so checks remain consistent during repeated use. Supplied as a reject-type ring gauge, it allows for a clear pass/fail decision that speeds up routine inspections and helps to contain non-conforming parts before they progress further in the production chain. Traceable calibration and standard conformity for decisive acceptance criteria The gauge is delivered with a calibration certificate, confirming traceability and documented measurement status at the time of supply. Conformity to DIN 13 (6g) sets the tolerance and thread form expectations for metric ISO fine threads, ensuring compatibility with established acceptance limits. Using a traceably calibrated reference removes ambiguity from inspection records and supports quality processes, audit trails and supplier verification. The instrument’s robust build and documented calibration make it suitable as a fixed control in assembly lines or as a portable check during incoming goods inspections. Practical benefits: faster checks, consistent results and reduced scrap Adopting a purpose-built ring gauge for thread control transforms repetitive checks into immediate decisions: the clear gauge condition lowers training requirements, reduces measurement variability and shortens cycle times. Consistent acceptance criteria cut rework and scrap, while the hardened construction and simple go/no-go usage minimise maintenance effort. Where repeatability and throughput matter, this gauge provides an efficient way to secure component quality while keeping inspection workflows lean and dependable. Request the Metav IndustryLine M90×6 thread ring gauge from Metav Werkzeuge to secure traceable inspection standards with a calibration certificate and DIN 13 compliance; contact the Metav team for technical clarification and delivery options. Technical data Article number: M315.890.A GTIN: 4054469155951 Tariff number: 90173000 Facts Thread size: M90 × 6 Weight: 2 kg Standard: DIN 13, 6g Special features Material: Gauge steel, hardened Type: Reject gauge (AUSSCHUSS) Orientation: Right-hand thread Supplied with calibration certificate FAQ Which thread form and size does this gauge check? The gauge checks right-hand M90 × 6 metric ISO fine threads using the Metav IndustryLine thread ring gauge (SKU M315.890.A). Is the gauge delivered calibrated? Yes, the item is supplied with a calibration certificate, confirming its measured status at delivery. What does conformity to DIN 13 (6g) mean for acceptance? Conformity to DIN 13, 6g indicates the thread tolerance and form used for acceptance limits when checking with this ring gauge. How are inspection results interpreted with this ring gauge? As a reject-type ring gauge, a clear pass/fail decision is produced: the component either fits the reference form or it does not, enabling immediate sorting or containment. Is this gauge suitable for repeated shop-floor use? Yes, the hardened gauge steel construction and robust design make it suitable for repeated checks in production and incoming inspection environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x6 Thread Go Gauge For Metric ISO Fine Thread, Right-Hand, Hardened Gauge Steel, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Count on the combination of hardened gauge steel, conformity to DIN 13, 6H and a supplied calibration certificate for fast, traceable reject detection; order the thread plug gauge directly via Metav Werkzeuge or ask our consultants if needed Thread plug gauge NO‑GO M90 x 6.0 – metric ISO fine thread, hardened gauge steel (Metav IndustryLine) The Thread plug gauge NO‑GO M90 x 6.0 is a right‑hand metric ISO fine‑thread reject gauge for quick go/no‑go checks in production inspection and quality control No‑go thread plug gauge M90 x 6.0 right‑hand Metric ISO fine thread, tolerance DIN 13, 6H Hardened gauge steel for long service life Supplied with calibration certificate Rapid Go/No‑Go checks to keep production moving The NO‑GO plug simplifies routine thread inspection: a single tactile trial determines conformity without measurement interpretation. By using this plug gauge with a defined reject limit, repetitive checks on batches or incoming components are reduced to fast tactile tests that minimise line stoppages and rework. The clear go/no‑go concept supports consistent decisions on accept or reject, increasing throughput while maintaining documented quality control. Built for stability and repeatability in demanding environments Constructed from hardened gauge steel, the gauge maintains form under frequent handling and resists wear that would otherwise compromise results. The specification to DIN 13 with tolerance class 6H ensures compatibility with standard metric ISO internal threads, so measurements remain comparable across suppliers and inspection stations. The robust material and finish translate into fewer replacements and predictable service intervals for workshop and production use. Traceable calibration that supports conformity and audits Delivered with a calibration certificate, the gauge provides documented traceability suitable for internal QA and external audits. The supplied certificate records the check against defined limits so that batch releases and inspection records can reference a certified inspection tool. This documented assurance reduces uncertainty in compliance procedures and supports quality managers in maintaining control plans and inspection records. Practical scope and typical applications Designed for right‑hand metric fine threads, the gauge is ideal for workshop inspection benches, incoming goods control and production sampling in industries working with large‑diameter threaded components. Quality departments, toolrooms and machine shops benefit from the simple reject‑or‑accept criterion of the plug, which is particularly useful where fast decisions on threaded bores are needed. The compact, single‑purpose design suits repetitive checks and integration into routine inspection sequences. For reliable, traceable thread rejection testing choose the Metav IndustryLine NO‑GO plug gauge M90 x 6.0 — contact Metav Werkzeuge for technical advice or to secure supply directly from Emmerich Technical data Article number: M315.690.A GTIN: 4054469155692 Label: Gewinde‑Lehrdorn AUSSCHUSS M 90 X 6,0 für metrisches ISO‑Feingewinde, rechts Facts Thread size: M90 x 6.0 Pitch: 6.0 mm Weight: 2 kg Tariff number: 90173000 Special features Right‑hand metric ISO fine thread DIN 13, tolerance class 6H Gauge steel, hardened Supplied with calibration certificate Category: Gauges; Measuring pins FAQ What is the purpose of this NO‑GO plug gauge? The NO‑GO plug gauge is used to verify that an internal thread does not exceed the reject limit; the Thread plug gauge NO‑GO M90 x 6.0 by Metav IndustryLine provides a definitive tactile check for conformity. Is the gauge supplied calibrated? Yes, the gauge is supplied with a calibration certificate which documents the check and supports traceability in quality records. Which thread standard and tolerance does the gauge check? The gauge is specified for metric ISO threads according to DIN 13 with tolerance class 6H. Can it be used for left‑hand threads? This particular gauge is manufactured for right‑hand threads; a left‑hand variant would be required for left‑hand inspections. What applications are suitable for this plug gauge? Typical uses include incoming goods inspection, production sampling and workshop quality checks for large‑diameter threaded bores where a fast reject decision is needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90x6 Thread Go Plug Gauge Metric ISO Fine Thread Right-Hand Hardened Gauge, DIN 13 6H, Calibrated Certificate - Metav IndustryLine
Take advantage of the combination of hardened gauge steel, DIN 13 tolerance 6H and an included calibration certificate for reliable thread inspection and reduced rework. Order the thread gauge directly via Metav Werkzeuge or contact our consultants for technical clarification. Thread plug gauge GUT M90 x 6.0 — Metric ISO fine thread, right-hand, DIN 13 (6H) A Thread plug gauge GUT M90 x 6.0 for fast verification of metric ISO fine threads in production and quality control. Hardened gauge steel construction Conforms to DIN 13 tolerance 6H Supplied with calibration certificate Right-hand metric fine thread Reliable inspection that reduces rejects The plug gauge is designed for repeatable go/no-go checks on metric ISO fine threads, ensuring quick decisions on part conformity. Manufactured from hardened gauge steel, the gauge retains its form under regular use, delivering consistent contact geometry and minimal wear. Conformity with DIN 13 and the 6H tolerance class provides a clear, industry-recognised acceptance criterion that speeds up inspection routines and lowers the risk of downstream rework. Traceability and calibration for audit-ready measurement Supplied with a factory calibration certificate, the gauge supports traceable measurements and audit requirements. The calibration documentation accompanies the gauge so that inspection records can be linked to a verified standard; this is particularly relevant for regulated production environments and incoming inspection. The combination of standard compliance and documented calibration improves quality assurance workflows and helps to demonstrate control during supplier audits. Practical handling and application in the workshop The compact design and clearly defined thread size M90 x 6.0 make the gauge suitable for bench inspection stations and shop-floor quality posts alike. As a right-hand thread plug gauge, it is ready for immediate use in verifying internal thread dimensions and lead form; usage requires only a stable hold and straightforward insertion. The robust material choice simplifies maintenance: periodic visual inspection and correct storage preserve the gauge’s functional life and measurement reliability. For dependable thread verification choose the Metav IndustryLine plug gauge — order via Metav Werkzeuge for fast supply and expert advice from Emmerich. Technical data Article number: M315.590.A GTIN: 4054469155562 Weight: 2 kg Material: gauge steel, hardened Thread: M90×6.0, right-hand Standard: DIN 13, 6H Core specifications Mass/Thread size: M90×6.0 Tariff code: 90173000 ECLASS: 21170228 Special features Supplied with calibration certificate Manufacturer: Metav IndustryLine For metric ISO fine threads Suitable for go/no-go inspection FAQ What does the calibration certificate cover? The supplied calibration certificate documents the gauge’s verification at the factory and provides traceability for the Thread plug gauge GUT M90 x 6.0, useful for quality records and audits. Is the gauge suitable for routine shop-floor checks? Yes, the hardened gauge steel construction and conformity to DIN 13 (6H) make this plug gauge suitable for regular production and inspection tasks. Can the gauge be used for both internal thread form and size checks? The plug gauge is intended for verification of internal thread size and basic lead/fit; it provides a clear go/no-go decision for metric ISO fine threads. How should the gauge be stored to preserve accuracy? Store the gauge clean and dry, ideally in a protective sleeve or case, and avoid mechanical shocks; regular visual inspection will help maintain reliable performance. Who manufactures the gauge and where is it supplied from? The gauge is manufactured under Metav IndustryLine and is supplied via Metav Werkzeuge; the item is listed as M315.590.A and comes with a calibration certificate. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90×1.5 Thread Gauge Ring Metric ISO Fine Thread Right-Handed Hardened Gauge Steel DIN 13 6g With Calibration Certificate - Metav IndustryLine
Take advantage of a robust combination of production-ready measuring accuracy and traceable calibration: the GO ring gauge design in hardened gauge steel ensures rapid go/no-go checks while the enclosed calibration certificate secures measurement traceability. Order the gauge via Metav Werkzeuge for reliable conformity checks or request expert advice from our consultants. Thread ring gauge GUT M90 x 1.5 — GO gauge, hardened gauge steel The Thread ring gauge GUT M90 x 1.5 is a GO (GUT) ring gauge for quick verification of metric ISO fine threads in right-hand form, intended for workshop and production quality control GO ring gauge, metric M90×1.5 Hardened gauge steel construction Complies with DIN 13, 6g Includes calibration certificate Rapid go/no-go checking to keep production moving A GO ring gauge provides a clear, binary inspection result: the thread either passes or fails the acceptance test, enabling fast decisions on the shop floor. The GO gauge geometry corresponds to the tolerance class DIN 13, 6g, so inspection becomes a straightforward check for conformity with the specified metric ISO fine thread. Using such a dedicated ring reduces cycle times in incoming inspection and assembly testing, lowering throughput delays and helping to avoid unnecessary rework. Durable materials and certified traceability for dependable results Manufactured from hardened gauge steel, the ring offers stable contact surfaces that resist wear and preserve the measuring limit over repeated use. The gauge is supplied with a calibration certificate, ensuring traceability of the inspection limit to an accredited measurement standard. This documented verification supports internal quality records and audit trails while providing confidence that the M90 x 1.5 inspection limit is accurate and reproducible. Practical design for workshop and production environments The right-hand GO ring is sized M90 x 1.5, making it suitable for medium-to-large threaded components where quick conformity checks are required before assembly or acceptance. As a simple inspection tool, the ring gauge is rugged, easy to handle and integrates directly into quality control routines without complex setup. Its design assists in preventing faulty assemblies and reduces scrap by identifying non-conforming threads at the earliest stage. For reliable conformity testing of metric ISO fine threads, request the Metav IndustryLine GO thread ring gauge from Metav Werkzeuge — our specialists will advise on suitability and ensure prompt supply. Technical Data SKU: M315.790.6 GTIN: 4054469152691 Type: GO ring gauge Thread size: M90 x 1.5 Hand: right-hand Material: gauge steel, hardened Standard: DIN 13, 6g Includes: calibration certificate Tariff code: 90173000 Weight: 2 kg Facts Major diameter: 90 mm Thread pitch: 1.5 mm Weight: 2 kg Tariff number: 90173000 Special features GO (GUT) pass/no-pass function Hardened gauge steel for wear resistance Right-hand metric ISO fine thread Supplied with calibration certificate Category: Gauges / Inspection tools FAQ Is this ring suitable for acceptance testing to DIN thread tolerances? The ring is manufactured to DIN 13, 6g and serves for acceptance-style GO checking of threads specified to that tolerance band. Does the gauge arrive ready to use for documented inspections? Yes, the gauge is delivered with a calibration certificate, providing traceable evidence that the inspection limit complies with the issued documentation. What does GUT mean on the item label? GUT indicates the GO (pass) ring function; the GO ring gauge confirms whether a thread meets the minimum clearance of the specified tolerance class. Can this gauge be used on both left- and right-hand threads? This specific ring is manufactured for right-hand metric ISO fine threads in size M90 x 1.5; left-hand threads require the corresponding left-hand gauge. Who supplies and guarantees the product? This Metav IndustryLine GO thread ring gauge is supplied via Metav Werkzeuge and is intended for workshop and production inspection tasks; the included calibration certificate supports quality assurance processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M90×3 Go/No-Go Thread Ring Gauge Metric ISO Fine Right-Hand, Hardened Gauge Steel, DIN 13 6g, Calibrated Certificate - Metav IndustryLine
Take advantage of a hardened gauge-steel construction, conformity with DIN 13 (6g) and an included calibration certificate for dependable rejection testing; order this certified no-go thread ring gauge directly via Metav Werkzeuge or consult our experts for application advice. No-go thread ring gauge M90 x 3.0 – right-hand, DIN 13 (6g) by Metav IndustryLine No-go thread ring gauge M90 x 3.0 – right-hand is a purpose-built reject gauge for the functional inspection of metric ISO fine threads, intended for workshop and quality‑control environments Hardened gauge-steel construction DIN 13 tolerance class 6g Includes calibration certificate Right-hand metric fine thread M90 x 3.0 Reliable rejection testing for process control The no-go ring is designed to provide a clear, objective pass/fail result during thread inspection: a part that enters the ring indicates a dimensional non-conformance. Built to the DIN 13 standard with tolerance class 6g, this gauge supports reproducible decisions on batch conformity and reduces subjective judgement in the inspection loop. The combination of standardised tolerancing and a dedicated reject gauge streamlines quality control, limiting downtime caused by uncertain measurements. Robust design for repetitive industrial use Manufactured from hardened gauge steel, the ring offers high wear resistance and long service life under regular shop-floor handling. The right‑hand M90 x 3.0 thread form is machined to stable geometry, preserving the functional limit over many inspection cycles. A delivered calibration certificate documents the gauge condition at supply and provides traceability for quality records, supporting internal audits and compliance activities. Low‑maintenance design means the gauge remains a reliable reference without complex upkeep. Practical fit for production and sampling This reject ring is suited to in‑process checks, final inspection and sampling of metric fine-threaded components where a concise go/no-go verdict is required. The compact, single-purpose tool is quick to use at the workstation and complements dimensional measuring systems by offering an immediate functional assessment. For documented inspection plans, the gauge’s certification and conformity to recognised standards make it easy to include in control procedures and inspection reports. For certified inspection gauges from Metav IndustryLine, contact Metav Werkzeuge for specification advice and supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M315.890.8 GTIN: 4054469154718 Tariff number: 90173000 Numbers / Core technical data Thread designation: M90 x 3.0 Tolerance class: 6g (DIN 13) Weight: 2 kg Special features Material: hardened gauge steel Type: no-go (reject) ring gauge, right-hand thread Supplied with calibration certificate Manufacturer: Metav IndustryLine FAQ What is the purpose of this ring gauge? The no-go ring gauge is used to detect threads that exceed the upper limits of the specified tolerance; the No-go thread ring gauge M90 x 3.0 (Metav IndustryLine, SKU M315.890.8) provides a rapid reject decision during inspection. Does the gauge comply with recognised standards? Yes, the gauge is manufactured to DIN 13 with tolerance class 6g, ensuring compatibility with standard metric ISO fine-thread specifications for quality control. Is a calibration certificate included with delivery? A calibration certificate is supplied with the gauge, documenting its condition at delivery and supporting traceability for quality documentation. What material is the ring made from and why does it matter? The ring is made from hardened gauge steel, chosen for wear resistance and dimensional stability so that the functional limits remain reliable over prolonged use. Can this gauge be used for left-hand threads? This particular item is a right‑hand M90 x 3.0 no‑go ring; left‑hand versions are different items and should be selected accordingly. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M92x1.5 Thread Gauge Go, Metric ISO Fine Thread Right-Hand, Hardened Gauge Steel DIN 13 6g Calib. Certificate - Metav IndustryLine
Take advantage of a hardened gauge steel construction and a supplied calibration certificate for dependable production control; the M92 × 1.5 Go ring reduces inspection time while maintaining conformity to recognised thread standards. Order this thread gauge via Metav Werkzeuge or consult our specialists for application advice. M315.792.6 Go thread ring gauge M92 × 1.5 — hardened gauge steel, calibrated The M315.792.6 Go thread ring gauge is a right‑hand metric ISO fine‑thread go ring designed for rapid pass/fail checks in production and incoming inspection. Hardened gauge steel construction Calibrated — certificate included DIN 13 tolerance class 6g Go ring for M92 × 1.5 right‑hand thread Rapid pass/fail checks to keep production moving A dedicated go ring simplifies routine thread inspections: the proven functional check eliminates time‑consuming measurement routines and enables operators to confirm conformity in seconds. Because the gauge is made from hardened gauge steel, it resists wear and keeps its functional fit longer, which reduces the need for frequent replacements and supports consistent repeatability on the shop floor. The compact inspection workflow translates directly into lower throughput times and fewer bottlenecks in small‑batch or series production. Durable construction with traceable calibration The ring is manufactured from hardened gauge steel, a material selected for dimensional stability and abrasion resistance, and it arrives with a calibration certificate to document conformity. Traceable calibration supports quality records and simplifies audits; the supplied document demonstrates that the gauge has been checked and issued for use. Conforming to DIN 13, tolerance class 6g ensures the thread fit is assessed by an industry‑recognised standard, giving engineering and quality teams the objective basis for acceptance or rejection decisions. Practical fit for workshop and inspection benches Designed as a right‑hand metric fine‑thread go gauge for M92 × 1.5, the tool is suitable for quick verification during incoming inspection, final checks or process control stations. Its robust construction and clear acceptance criterion reduce operator training time and help maintain consistent pass/fail decisions across shifts. Integration into established quality procedures is straightforward: the functional check complements dimensional reports and supports a lean inspection regime that prioritises efficiency and documented compliance. For reliable thread inspection, request the Metav IndustryLine M315.792.6 from Metav Werkzeuge in Emmerich or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for application support and delivery options Technical data SKU: M315.792.6 GTIN: 4054469152707 Customs tariff number: 90173000 Weight: 2 kg Facts Thread size: M92 × 1.5 Thread form: metric ISO fine thread Tolerance class: 6g (DIN 13) Hand: right‑hand Special features Material: gauge steel, hardened Delivered with calibration certificate Functional type: Go (GUT) ring Category: thread gauges / limit gauges FAQ What thread does this ring gauge check? The M315.792.6 Go thread ring gauge checks a metric ISO fine thread of size M92 × 1.5, designed for right‑hand threads. Is the gauge supplied with a calibration document? Yes, the gauge is delivered with a calibration certificate confirming it has been checked prior to dispatch. Which standard does the ring conform to? The ring is produced to DIN 13 and assesses the thread to tolerance class 6g, enabling standardised acceptance criteria. What material is the gauge made from? The gauge is manufactured from hardened gauge steel, chosen for dimensional stability and wear resistance in workshop environments. Can this gauge be used for final product approval? The M315.792.6 is intended for functional go/no‑go checks as part of inspection and process control; the supplied calibration certificate supports its use in documented quality procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com