Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
13.04mm Test Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high measurement fidelity and compact design for reliable end‑of‑line inspection — ±0.002 mm tolerance and a 13.04 mm nominal diameter ensure repeatable results. Order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.D04 — single inspection pin, 13.04 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.D04 is a single‑piece inspection pin intended for precise end‑measurement and gauge work in workshop environments. Workshop version for robust use Diameter precisely 13.04 mm Length 50 mm for repeatable insertion Tolerance ±0.002 mm for high accuracy Precision that shortens inspection cycles The M323.D04 delivers a ±0.002 mm positional tolerance, which translates into consistently reproducible checks during batch inspection and assembly verification. Where tight clearances or finish criteria are critical, the pin’s defined diameter of 13.04 mm removes ambiguity from go/no‑go checks and minimises rework. By reducing measurement scatter, this component supports faster decision making on the shop floor and improves throughput in repetitive measurement tasks. Robust workshop execution for daily use Constructed in special steel and specified as a workshop version, the pin is designed for regular handling and insertion cycles typical of production environments. The 50 mm overall length gives sufficient engagement for stable seating while keeping handling straightforward for operators and fixtures. The combination of compact form and solid material ensures that the pin remains a dependable reference element in checks and jigs without demanding excessive fixture redesign. Suited to micro‑scale inspection and gauge sets With a nominal diameter of 13.04 mm, this item falls into the micro measurement class (10–100 mm), making it suitable for fine mechanical tasks and end‑measurements in precision subassemblies. The design supports integration into gauge blocks, alignment jigs and dedicated inspection fixtures where exact diameters serve as a reference standard. Identification and traceability are straightforward thanks to the SKU and GTIN, aiding inventory control in production and quality departments. For procurement or technical clarification regarding the Metav IndustryLine gauge pin M323.D04 with its ±0.002 mm tolerance, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.D04 GTIN: 4061905067181 Label: Gauge pin, single, 13.04 mm diameter, 50 mm length Manufacturer: Metav IndustryLine Material: Special steel Weight: 0.1 kg Facts Diameter: 13.04 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm eClass: 21170231 Special features Workshop execution Category: gauge pins Storytrigger: end measurements FAQ What tolerance can be expected from this inspection pin? The Metav IndustryLine gauge pin M323.D04 is specified with an accuracy of ±0.002 mm, making it suitable for fine inspection tasks that require tight dimensional control. Which materials is the pin suitable for when used as a reference in gauges? The pin is made from special steel; as a hardened, dimensionally stable reference it is intended for use with typical workshop components during fitting and inspection operations. Is this pin intended for micro‑measurement applications? Yes, the diameter 13.04 mm places the item in the micro measurement class (10–100 mm), so it is well matched to small parts, precision assemblies and end‑measurement tasks. Can the M323.D04 be used interchangeably in standard gauge sets? The M323.D04 is manufactured as a single inspection pin with defined diameter and length; compatibility with a particular gauge set depends on the set’s nominal diameters and fixture geometry — check the SKU M323.D04 against the set specification. How is the product identified for stock and traceability? Identification is provided via the SKU M323.D04 and GTIN 4061905067181, which supports traceability and inventory management for quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.05mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of precise end-measurement capability and robust workshop construction: the test pin offers ±0.002 mm repeatability in a Ø13.05 mm body with a 50 mm overall length, enabling reliable fixture checks and reference gauging. Order directly via Metav Werkzeuge or contact their consultants for application advice and stock confirmation. Test Pin M323.D05 — single inspection pin, Ø13.05 mm, 50 mm length (Metav IndustryLine) The Test Pin M323.D05 is a workshop-grade single inspection pin designed for accurate end measurements and fixture alignment in general machine-shop applications. Workshop-grade construction Diameter Ø13.05 mm for exact fits 50 mm overall length for fixture work Tolerance ±0.002 mm for high repeatability Consistent micrometric control for routine inspection A tight tolerance of ±0.002 mm positions this inspection pin among high-precision shop tools, delivering repeatable reference points for go/no-go tests, end‑face checks and assembly verification. The small geometric deviation reduces measurement scatter when compared with standard pins, which in turn supports tighter process control and lower scrap rates. In practical terms, the consistent diameter of Ø13.05 mm ensures predictable seating in standard holders and fixture bores, so staff can rely on one reference dimension rather than compensating for variable fits. This accuracy supports quality assurance procedures without imposing complex handling changes. Built to endure everyday workshop demands Manufactured in special steel and finished for workshop use, the pin resists wear and maintains dimensional stability across repeated contact cycles. The workshop-grade execution is optimised for robust handling and repeatable seating, which reduces the frequency of replacements and downtime. A modest weight of 0.1 kg gives the pin a reassuring feel in use while remaining easy to manoeuvre during repetitive checks. The material choice balances hardness and toughness so the contact faces retain form under normal operating forces, extending service life and keeping inspection routines dependable. Easily integrated into existing gauging and fixture systems With a 50 mm overall length, this inspection pin fits common gauge blocks, test fixtures and alignment jigs without excessive overhang or the need for modification. The compact yet accessible geometry simplifies mounting and visual inspection, while the standard diameter enables interchangeability with holders designed for 13 mm-class pins. Traceable identification via SKU M323.D05 and GTIN 4061905067198 streamlines stock management and reordering for production lines. For workshops seeking a straightforward, low‑complexity reference component, this single inspection pin brings reliable dimensional reference into daily workflows with minimal training required. Choose the Metav IndustryLine test pin and contact Metav Werkzeuge in Emmerich for personalised advice and reliable supply to your workshop. Technical data Article number: M323.D05 GTIN: 4061905067198 Manufacturer: Metav IndustryLine Label: Test pin, single, 13.05 mm length 50 mm Core specifications Diameter: 13.05 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg eClass: 21170231 Features Workshop execution Material: Special steel Category: Test pins SKU: M323.D05 Application: End measurements and fixture checks FAQ What is the declared accuracy of the test pin? The declared positional accuracy is ±0.002 mm, making the Test Pin M323.D05 suitable for precise reference and go/no-go inspection tasks. Which material is used and how durable is it? The inspection pin is made from special steel in a workshop-grade finish; this provides wear resistance and dimensional stability for repeated contact use. What fixtures and holders will accept this pin? The Ø13.05 mm diameter and 50 mm length allow the pin to be used with standard 13 mm-class holders, gauge blocks and common fixture systems without modification. How is the product identified for reordering? The part is listed under SKU M323.D05 and GTIN 4061905067198; referencing these codes simplifies stock replacement and procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.06mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Reliable inspection in a compact format: high repeatability thanks to a tolerance of ±0.002 mm and wear-resistant special steel construction ensure dependable end-dimension checks. Order the gauge pin directly via Metav Werkzeuge or contact our advisors for specification support. Gauge pin, single 13.06 mm — workshop inspection pin, Metav IndustryLine A single gauge pin 13.06 mm designed for quick verification of bore diameters and end dimensions in workshop and production-control environments. Precision tolerance ±0.002 mm Diameter exactly 13.06 mm 50 mm hardened special steel length Delivered in a transport case Verify tight fits with predictable accuracy The compact inspection pin provides a straightforward method for checking holes, bores and mating features where repeatability matters. Produced from special steel and finished to a tight ±0.002 mm tolerance, the pin supports consistent go/no-go assessments and serves as a reference for assembly checks. The small, robust profile minimises deflection and wear, so measurements remain stable across repeated use, reducing rework and downtime. Built for workshop handling and durability This workshop-grade item is optimised for everyday use: the 50 mm shaft length gives sufficient engagement for standard inspections while keeping handling simple. The material choice focuses on surface resistance to rolling and abrasion, translating into longer service life and lower lifecycle costs when compared with untreated pins. The design facilitates fast manual checks and integrates easily into inspection jigs or bench routines. Practical logistics and traceability for production Supplied individually and packed for transport, the pin arrives protected against handling damage, simplifying storage and bin management on the shop floor. The compact packaging also makes it straightforward to issue the item with incoming inspection or include it in a gauge set. Clear identification with the SKU and GTIN supports traceability through ordering and inventory systems, aiding quality documentation and audit trails. Why this inspection pin suits professional shops Engineered as a workshop execution item, the pin balances ruggedness with metrological performance to meet the needs of maintenance teams, small-batch production and quality departments that require reliable checks without overcomplexity. Its precise diameter and hardened construction make it suitable for repetitive go/no-go fits and bench verification tasks, delivering measurable efficiency gains in routine inspection workflows. Contact Metav Werkzeuge today to discuss suitability for specific inspection routines or to order the Gauge pin, single 13.06 mm (SKU M323.D06) directly from our Emmerich warehouse Technical Data Article number: M323.D06 GTIN: 4061905067204 Manufacturer: Metav IndustryLine Facts Diameter: 13.06 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Delivered in transport case FAQ What is the exact diameter and tolerance of this gauge pin? The gauge pin has a diameter of 13.06 mm and is manufactured to a tolerance of ±0.002 mm, suitable for precise fit verification. Is the pin supplied ready for use or does it require preparation? The Gauge pin, single 13.06 mm from Metav IndustryLine is supplied ready for inspection tasks and arrives packed in a transport case for protection during handling. Can this inspection pin be used in production jigs and fixtures? Yes, the pin’s hardened special steel construction and exact diameter make it suitable for integration into jigs, fixtures and manual checking stations. What identifiers should be used when ordering or recording this item? Use SKU M323.D06 and GTIN 4061905067204 to ensure the correct item is ordered and tracked in inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.07mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of workshop‑ready precision with a 13.07 mm end measure produced from special steel and a verified dimensional deviation of ±0.002 mm; order directly via Metav Werkzeuge or request advice from our consultants for integration into fixture and inspection processes. Metav IndustryLine gauge pin, Ø 13.07 mm, length 50 mm — special steel, ±0.002 mm tolerance The gauge pin Ø 13.07 mm, 50 mm long is a single hardened test pin for end‑measurement, fixture set‑up and quick dimensional checks in workshop and quality‑control environments. Workshop version for robust use Diameter 13.07 mm for end measurement Tolerance ±0.002 mm for high accuracy 50 mm overall length for fixture set‑up Precision where it reduces rework and downtime The Metav IndustryLine gauge pin delivers repeatable results thanks to a tight ±0.002 mm tolerance, which minimises adjustment loops during assembly and inspection. In practice, this degree of accuracy reduces the need for trial fits and shortens setup times on jigs and fixtures. The specified deviation indicates the maximum permissible difference from nominal diameter, ensuring a reliable reference for comparative checks and pass/fail gauging. For workshops that value consistent throughput, this single‑piece test pin functions as a compact, traceable standard for everyday dimensional control. Durable construction that suits the workshop environment Manufactured from special steel, the pin combines wear resistance with dimensional stability under typical workshop stresses. The 50 mm shank provides comfortable handling and secure seating in fixture bores, while the solid design resists bending during manual use. The robust workshop execution makes the pin suitable for frequent handling and integrates well with standard test benches and manual measuring routines. Where a hardened reference is required for frequent end‑measure comparisons, the material selection supports long service life and predictable performance. Practical use and advantages for quality control As a dedicated end‑measure, the pin is intended for quick verification of hole diameters, alignment checks and as a locating element during assembly. Being a single‑item gauge simplifies traceability and storage within a set of assembly aids; the compact dimensions facilitate rapid swapping between stations. The combination of 13.07 mm diameter and 50 mm length provides a balance between reach and rigidity, which is particularly helpful when checking bores or setting up small fixtures. The clear nominal size and robust finish reduce the risk of operator error in routine checks. For a workshop‑proof reference standard from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice or to arrange a purchase and delivery. Technical data SKU: M323.D07 GTIN: 4061905068096 Manufacturer: Metav IndustryLine Facts Diameter: 13.07 mm Length: 50 mm Tolerance / deviation: ±0.002 mm Weight: 0.10 kg Special features Material: special steel Workshop execution Single test pin for end measurements Suitable for fixture set‑up and dimensional checks FAQ What materials is the pin made from? The gauge pin is manufactured from special steel, chosen for wear resistance and stability under workshop conditions. What level of accuracy can be expected? The gauge pin is supplied with a dimensional deviation of ±0.002 mm, making it suitable for high‑precision comparative checks in production and inspection. Can the pin be used for locating and fixture set‑up? Yes, the 50 mm overall length and rigid construction make the pin appropriate as a locating element and for setting up jigs and fixtures. Is this pin a single item or part of a set? This listing refers to a single gauge pin (SKU M323.D07) intended for individual use as a reference or locating component. Which tasks is the pin best suited for? Typical uses include quick bore verification, alignment checks and end‑measurement tasks where a durable, accurate reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.08mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of a workshop-grade gauge pin that combines tight dimensional control with robust material for repeatable end measurements; the Ø13.08 mm / 50 mm test pin offers a ±0.002 mm tolerance for reliable fit checks. Order the gauge pin directly via Metav Werkzeuge or ask our consultants for application advice. Gauge pin, single — Ø13.08 mm, length 50 mm (Metav IndustryLine) The Gauge Pin Ø13.08 mm, 50 mm length is a workshop-grade precision test pin designed for end‑measure checks and fit inspection in production and inspection routines Workshop-grade construction Diameter Ø13.08 mm for end measurements Dimensional tolerance ±0.002 mm Special steel for robust use Consistent precision for routine inspection A straight, hardened gauge pin with a tolerance of ±0.002 mm provides a dependable reference for go/no‑go checks, assembly trials and verification of mating bores. The narrow tolerance reduces uncertainty in pass/fail decisions, which supports faster quality gates on the shop floor. The controlled geometry of the test pin reduces measurement scatter and helps maintain throughput without repeated set‑ups. Built for workshop handling and durability Manufactured in special steel and specified as a workshop‑grade article, this test pin withstands frequent handling and typical production wear. The 50 mm overall length and Ø13.08 mm diameter give a compact footprint that fits common fixtures and inspection jigs. The modest mass ensures easy placement and removal, while the robust material extends service life under daily use, reducing replacement intervals and unplanned downtime. Practical use and traceability in inspection workflows The single test pin is suited to end‑dimension assessment, alignment checks and functional fit trials in manufacturing or incoming inspection. Marking and the included identifiers support traceability during audits; the clear SKU and GTIN allow direct reordering and inventory control. Simple handling and unambiguous geometry make the element a pragmatic tool for repetitive checks, helping teams keep quality documentation concise and reproducible. For workshop applications demanding repeatable end‑measure checks, request the Metav IndustryLine gauge pin (SKU M323.D08) from Metav Werkzeuge and consult our specialists for matching inspection routines Technical data Article number: M323.D08 GTIN: 4061905068133 Label: Prüfstift, einzeln, 13,08 mm Länge 50 mm Diameter: 13.08 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Material: Special steel Version: Workshop execution Type: Single test pin Category: Gauge pins FAQ What is the measurement tolerance of this test pin? The test pin is manufactured to a tolerance of ±0.002 mm, providing stable reference values for fit and end‑measure inspections with the Metav IndustryLine gauge pin (SKU M323.D08). For which applications is this gauge pin suitable? This single gauge pin is intended for end‑dimension checks, bore fit verification and assembly trials in workshop and production settings where compact, repeatable test elements are required. What material is used and why does it matter? Made from special steel, the pin combines dimensional stability with wear resistance, ensuring consistent geometry under frequent handling typical of workshop inspection routines. How is the product identified for reordering and traceability? Use the SKU M323.D08 and GTIN 4061905068133 to record the item in inventory systems and to reorder the exact workshop‑grade gauge pin from Metav IndustryLine. Can this pin be used in fixture checks and assembly jigs? Yes — the combination of Ø13.08 mm diameter and 50 mm length fits common fixtures and inspection jigs for routine assembly and quality checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.09mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Combining a ±0.002 mm tolerance with a 13.09 mm diameter and a 50 mm length provides dependable reference dimensions for inspection and fixture set-up; order the gauge pin directly via Metav Werkzeuge or consult our technical team for application advice Gauge pin M323.D09 — 13.09 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin 13.09 mm, length 50 mm is a workshop-grade, precisely ground test pin for end‑dimension checks, locating and go/no‑go references in inspection fixtures Workshop-grade special steel Diameter 13.09 mm, ground to size Length 50 mm for fixture compatibility Tolerance ±0.002 mm for tight inspection Accurate reference for measurement and inspection The M323.D09 gauge pin is manufactured for high repeatability and dimensional accuracy. With a declared tolerance of ±0.002 mm, the pin serves as a reliable reference for end‑dimension verification and fixture alignment. Its 13.09 mm diameter is produced by precision grinding, reducing runout and ensuring consistent contact with mating bores. This level of precision supports faster quality decisions on the shop floor, reducing rework and improving throughput. Durable construction tailored for workshop use Built in a workshop version specification from special steel, the pin balances wear resistance with manageable handling weight (approx. 0.1 kg). Surface finishing and material selection contribute to a long service life under repeated insertion cycles. The solid construction makes the item suitable for daily use in production and inspection environments where robust components are required without sacrificing measurement integrity. Practical integration into quality workflows Supplied as a single, ready‑to‑use test pin with the manufacturer SKU M323.D09, the component integrates easily into existing gauges, plug‑gage sets and locating fixtures. Traceable identification such as GTIN 4061905068140 simplifies logging and inventory control. The compact 50 mm length provides sufficient engagement depth for most fixture applications while remaining easy to handle during rapid inspection sequences, supporting efficient measurement processes on the shop floor. Order the Metav IndustryLine gauge pin from Metav Werkzeuge for a workshop‑ready precision reference — Metav Werkzeuge is available for specification support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M323.D09 GTIN: 4061905068140 Brand: Metav IndustryLine Material: Special steel Version: Workshop execution Facts Diameter: 13.09 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Single gauge pin delivery Precisely ground finish Intended for end‑dimension checks and locating FAQ What is the declared dimensional tolerance of the gauge pin? The gauge pin M323.D09 is specified with a tolerance of ±0.002 mm, suitable for tight inspection tasks. Is the pin suitable for fixture locating and plug checks? Yes, this Metav IndustryLine test pin is intended for locating and end‑dimension verification in fixtures and plug‑gage applications. What material is the pin made from and how durable is it? The pin is manufactured from special steel in a workshop version, offering durable performance under repeated use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.11mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of high repeatability, compact dimensions and a workshop‑grade finish to speed up small‑part inspection and reduce rework. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin M323.D11 — single precision test pin, 13.11 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin M323.D11 is a single precision test pin intended for end‑measurement and inspection tasks in workshop environments, offering a tight manufacturing tolerance for reproducible fits. Diameter 13.11 mm Length 50 mm Tolerance ±0.002 mm Workshop version Precision that shortens inspection cycles The tight production tolerance of ±0.002 mm ensures consistent seating and repeatable measurements when checking bores, gauges or reference fittings. Manufactured from special steel, this precision test pin maintains a reliable diameter under typical workshop handling and resists minor surface damage that can compromise fit checks. The combination of exact diameter and robust material reduces uncertainty in sequential checks, helping to lower the number of re‑measures and minimise process interruptions. Compact format tailored to fine components Classified in the micro range (10–100 mm), the compact dimensions of this inspection pin make it especially suitable for fine mechanical parts, small housings and fixtures where control of end dimensions is critical. With a 13.11 mm measuring diameter and 50 mm overall length, the pin provides sufficient reach without sacrificing stiffness, so delicate parts can be verified with confidence. The short, rigid profile supports quick manual handling and straightforward integration into inspection jigs or fixture checks. Workshop‑grade build for dependable everyday use Delivered as a workshop version, the pin is balanced between precision and practical durability for regular use on the shop floor. The special steel construction offers wear resistance and dimensional stability under normal inspection loads, while the modest mass supports safe handling. Intended for routine verification and sample checks, this test pin is a pragmatic choice where traceable, repeatable dimensional control is required without the cost or fragility of laboratory tools. For reliable measurement of small diameters, request technical guidance for the Metav IndustryLine gauge pin (M323.D11) from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for assistance and rapid availability. Technical data Article number: M323.D11 GTIN: 4061905068164 Eclass: 21170231 Facts Diameter: 13.11 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Single gauge pin Workshop version Material: special steel Category: gauge pins FAQ What is the manufacturing tolerance of this gauge pin? The gauge pin M323.D11 is manufactured to a tolerance of ±0.002 mm, providing tight dimensional control for repeatable inspections. Which materials is the pin suitable for checking? The Metav IndustryLine gauge pin is a dimensional reference for verification tasks and is used to check bores and components made from metals and typical workshop materials. Is the gauge pin supplied calibrated? The product label does not indicate factory calibration; the gauge pin M323.D11 is supplied without a calibration certificate unless otherwise specified at purchase. Can this pin be used in fixture testing for small housings? Yes, the compact 13.11 mm diameter and 50 mm length make this gauge pin well suited to fixture checks and small housing inspections within the micro measurement range. What is the SKU for ordering or referencing? Reference SKU M323.D11 when enquiring about this Metav IndustryLine gauge pin for faster handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.12mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of workshop-grade construction, sub‑millimetre tolerance of ±0.002 mm and a compact 50 mm length for reliable end‑measure checks; order directly via Metav Werkzeuge or consult our specialists for application guidance. M323.D12 Gauge Pin – 13.12 mm diameter, 50 mm length (Metav IndustryLine) The M323.D12 gauge pin is a precision test pin designed for end‑measure and go/no‑go checks in workshop and metrology environments. Workshop‑grade finish for daily use Tolerance ±0.002 mm for fine control Compact 50 mm length for bench measurement Consistent accuracy for critical fits The core benefit of this class of test pin is reproducible measurement: with a nominal diameter of 13.12 mm and a verified tolerance of ±0.002 mm, the pin supports tight acceptance criteria and repeatable pass/fail checks. Classified in the micro category for measuring tools, this size balances reach and stiffness for small components; it is therefore suited to precision checks on bores, fits and end gauges where even small diameter deviations matter. The numerical tolerance is presented as a clear specification for technical evaluation and comparison. Built for everyday workshop handling Manufactured from special steel, the pin combines wear resistance with a stable form to reduce measurement drift over repeated use. The 50 mm length gives sufficient engagement for many bench operations while keeping the profiling compact and easy to manoeuvre. The workshop‑grade configuration means surface finish and dimensional control are optimised for frequent handling, and delivery in a transport case protects the pin during storage and transit, reducing the risk of inadvertent damage. Practical use and integration in quality workflows As an individual test pin, the component is ideal for spot checks, setting up fixtures or as part of a gauge block stack when precise reference diameters are required. The simple geometry makes interpretation straightforward during inspection routines and supports efficient throughput in small series production. For organisations consolidating suppliers, acquisition via Metav IndustryLine provides traceable sourcing and consistent quality assurance, helping to simplify incoming inspection and reduce rework rates. For workshop applications requiring compact precision, contact Metav Werkzeuge to secure the Metav IndustryLine M323.D12 gauge pin and discuss suitability with our technical consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.D12 GTIN: 4061905068171 Manufacturer: Metav IndustryLine Facts Diameter: 13.12 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Supplied in transport case Single test pin, individual delivery FAQ What tolerance does the gauge pin provide? The M323.D12 gauge pin is specified with a tolerance of ±0.002 mm, making it suitable for fine inspection tasks. Is the pin suitable for bore checking and go/no‑go tests? Yes, the gauge pin is intended for end‑measure and go/no‑go checks and works well for bore verification and setting fixtures. What material is the test pin made from? The M323.D12 is made from special steel, chosen for durability and dimensional stability under routine workshop use. How is the pin supplied to protect accuracy during transport? The test pin is supplied in a transport case to protect the measuring surface and maintain accuracy in storage and transit. Can the pin be used in automated inspection fixtures? The compact geometry and tight tolerance of the M323.D12 make it compatible with many fixture‑based inspection setups where a precise reference diameter is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.13 mm Gauge Pin 50 mm Length Workshop Version - Metav IndustryLine
Take advantage of the high metrological accuracy and compact form factor to streamline end‑dimension checks in the workshop; the combination of 13.13 mm diameter, 50 mm length and a verified tolerance of ±0.002 mm supports consistent quality control. Order the gauge pin directly via Metav Werkzeuge or consult their technical team for application-specific advice. Gauge pin M323.D13 — single test pin, 13.13 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin M323.D13 for fast end‑dimension verification and repeatable go/no‑go checks in workshop inspection and small‑batch production. 13.13 mm gauge diameter 50 mm overall length for compact checks Accuracy ±0.002 mm for fine measurement Workshop-grade special steel construction Reliable, repeatable measurements for production control This single‑piece gauge pin delivers reliable precision suitable for routine inspection tasks where repeatability matters. The specified accuracy of ±0.002 mm defines the instrument's measuring capability and helps reduce uncertainty in tolerance checks, making it suitable for fine control of end dimensions. The compact design minimises handling error and supports fast throughput in workshop quality loops, so results remain consistent across repeated measurements. Compact form for rapid and accurate end‑size checking With a 13.13 mm diameter and 50 mm overall length, the pin is optimised for confined fixtures and small working envelopes. The short overall length reduces cantilevering and vibration, improving stability during insertion into bores or reference features. This form factor benefits tasks that demand quick go/no‑go validation or series spot checks rather than bulk gauging, giving technicians a practical tool for daily verification without complex setup. Workshop-grade construction for long service life Manufactured from special steel and specified as a workshop execution, the pin resists wear under normal inspection use and preserves dimensional integrity. The solid construction supports repeated contact checks and hand‑held measurements while maintaining surface condition. Where traceability or further documentation is required, Metav Werkzeuge can advise on optional calibration and handling practices to extend service life and preserve measurement reliability. Contact Metav Werkzeuge for tailored advice, measurement tolerancing support or to request the M323.D13 gauge pin with application guidance from their Emmerich team via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.D13 GTIN: 4061905068188 Material: special steel Supply: single piece Brand: Metav IndustryLine Facts Diameter: 13.13 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Workshop execution Intended for end‑dimension checks Single‑piece gauge pin FAQ What is this gauge pin intended for? The M323.D13 gauge pin from Metav IndustryLine is intended for end‑dimension verification and quick go/no‑go checks in workshop inspection and small‑batch production. What measurement tolerance does the pin offer? The gauge pin is specified with an accuracy of ±0.002 mm, providing fine resolution for routine dimensional control tasks. Is the M323.D13 supplied as a single item or in sets? This product is supplied as a single gauge pin (SKU M323.D13) for flexible use or integration into custom inspection sets. Can Metav IndustryLine provide calibration or traceability documentation? Calibration status is not specified with the standard supply; Metav Werkzeuge can be contacted to discuss calibration options or documentation for the gauge pin to meet specific traceability requirements. Which environments or applications suit this pin best? The pin's compact 50 mm length and robust steel construction make it well suited to workshop inspection, fixture checks and end‑size measurements where a stable, repeatable reference is needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.14mm Go/No-Go Test Pin 50mm Length Workshop Finish - Metav IndustryLine
A compact, workshop-grade gauge pin offering tight repeatability with a diameter of 13.14 mm and a length of 50 mm; its ±0.002 mm tolerance supports reliable go/no-go and reference checks while integrating straightforwardly into inspection workflows. Order the item directly via Metav Werkzeuge or request assistance from our consultants for specification matching. Gauge pin, single — 13.14 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin M323.D14 for precise reference and dimensional checks in metrology and workshop inspection tasks. Workshop-grade gauge pin, hardened special steel Diameter 13.14 mm for precise fits Length 50 mm for deep-bore checks Tolerance ±0.002 mm for repeatable results Accurate reference for routine inspections The compact inspection pin provides a direct physical reference for hole diameters and alignment tasks. With a nominal diameter of 13.14 mm and a declared tolerance of ±0.002 mm, the component minimises measuring uncertainty and speeds up comparative checks on production parts. Designed as a single-stage test pin, it acts as a reliable datum when paired with gauge blocks or fixture plates, supporting consistent measurements without elaborate setup. The tight tolerance makes it suitable for dimensional checks where standard workshop gauges would otherwise introduce variability. Durable design built for repeated handling Constructed from special steel in a workshop execution, the pin resists wear under frequent insertion and retraction cycles typical in production environments. The 50 mm length gives sufficient engagement depth for many bores while remaining easy to handle at the bench. A compact mass (approx. 0.1 kg) ensures manageable manipulation and quick placement in pin holders or measuring jigs. The robust material choice and finish prioritise longevity, reducing the need for frequent replacement and helping to maintain stable inspection routines. Easy integration into quality processes This inspection plug integrates into existing pin sets, quick-check fixtures and bench inspection stations, enabling faster go/no-go decisions and consistent part acceptance criteria. Labelling and item identification follow industry practise, allowing straightforward inventory control and traceability when used alongside calibration records and inspection logs. The combination of a clear nominal diameter, defined length and a documented ±0.002 mm tolerance supports quality documentation and repeatable sampling plans on the shop floor. Choose Metav IndustryLine gauge pins for dependable dimensional control — order the M323.D14 through Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930 for application advice Technical Data SKU: M323.D14 GTIN: 4061905068195 Brand: Metav IndustryLine Item: Gauge pin, single, 13.14 mm diameter, 50 mm length Facts Diameter: 13.14 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Measuring range: 13.14 mm Special features Material: Special steel Workshop execution Category: Gauge pins Story trigger: end dimensions FAQ What tolerance does this gauge pin have? The gauge pin M323.D14 is specified with a tolerance of ±0.002 mm, suitable for tight workshop inspection limits. What applications is this inspection pin intended for? It is designed for verifying hole diameters, alignment checks and acting as a reference pin in fixture and go/no-go test routines. Can the pin be used with standard pin holders and blocks? Yes, the geometry and dimensions of the M323.D14 make it compatible with common pin holders and block arrangements for quick integration. Is the item supplied individually or as part of a set? This entry describes a single gauge pin supplied as an individual test pin for flexible use in inspection systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.15mm Test Pin Length 50mm Workshop Version, Precision ±0.002mm - Metav IndustryLine
Combine reliable workshop use with ±0.002 mm measurement accuracy and a 13.15 mm controlled diameter for reproducible end‑dimension checks; robust special steel construction and delivery in a transport case ensure ready integration into inspection routines. Order the test pin directly via Metav Werkzeuge or ask our consultants if needed. M323.D15 gauge pin — 13.15 mm diameter, 50 mm length (Metav IndustryLine) The M323.D15 gauge pin is a precision inspection pin designed for end‑dimension verification and fixture use in workshop and production environments. High precision ±0.002 mm tolerance Diameter 13.15 mm for precise end‑gauging Robust special steel construction Delivered in transport case for protection Consistent measurement certainty for production control Manufactured to a ±0.002 mm specification, this precision gauge pin provides a stable reference for end‑dimension checks and pass/fail gauging. The tight tolerance reduces uncertainty in routine inspections, helping to speed acceptance tests and reduce rework. When incorporated into go/no‑go fixtures or bench inspection layouts, the controlled diameter delivers reproducible results that support quality documentation and traceable measurement chains. Durable design that copes with workshop demands The component is made from special steel, chosen for dimensional stability and wear resistance under frequent contact. A 50 mm overall length balances accessibility and rigidity, making the pin suitable for use in handheld gauges, fixture inserts and linear alignment tasks. The workshop version finish tolerates typical handling and contributes to a long service life, lowering intervals for replacement and maintenance while sustaining measuring performance. Practical handling and ready‑to‑use delivery Supplied as an individual inspection pin, the item is packaged in a protective transport case appropriate for maintenance and storage during shipment. The compact format simplifies inventory handling for inspection benches and metrology kits and allows straightforward integration into existing gauge sets. Clear identification (SKU M323.D15 and GTIN provided in the technical data) supports traceability in stock systems and process documentation. Contact Metav Werkzeuge in Emmerich for tailored application advice or to request a detailed specification sheet by email or phone: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: M323.D15 GTIN: 4061905065941 Material: Special steel Label: Test pin, single, 13.15 mm length 50 mm Numbers / core technical data Diameter: 13.15 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Weight: 0.1 kg Designs / special features Workshop version Single probe pin configuration Delivered in a transport case for protection Suitable for end‑dimension checks and fixture use FAQ What tolerance does the M323.D15 gauge pin offer? The M323.D15 gauge pin is manufactured to a tolerance of ±0.002 mm, making it suitable for fine inspection tasks and reproducible gauging in workshop environments. Which material is used for this inspection pin? This inspection pin is produced in special steel, giving a robust surface and dimensional stability for repeated measurement cycles. Is the pin supplied ready for use and protected during transport? Yes, the test pin is provided individually and delivered in a protective transport case to safeguard the component during shipment and handling. Can the gauge pin be integrated into fixtures and go/no‑go gauges? The design and dimensions of the M323.D15 are suitable for use as a fixture insert or as a reference element in go/no‑go and alignment setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.16mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
The combination of high repeatability, robust special steel construction and compact dimensions ensures dependable end‑measurement performance in workshop environments. Order the gauge pin directly via Metav Werkzeuge or contact the consultants for application advice. Gauge pin (single) Ø 13.16 mm, length 50 mm — Metav IndustryLine A gauge pin (single) Ø 13.16 mm, length 50 mm designed for precise end‑measure checks, fixture set‑up and repeatable inspection tasks in the workshop High accuracy ±0.002 mm Special steel construction Workshop version for robust use 50 mm length for compact fixtures Dependable accuracy for repeatable end‑measure checks The gauge pin delivers a measured accuracy of ±0.002 mm, which translates into consistently repeatable results for small‑format inspection tasks. This level of precision reduces measurement scatter and supports tight tolerance checks during final inspection or setup. With a nominal diameter of 13.16 mm, the pin provides a stable datum when used in mandrels, alignment fixtures or as a reference element in comparator rigs, helping to maintain process quality and reduce rework. Robust construction engineered for daily workshop use Manufactured from special steel, the test pin resists wear and maintains its form under frequent handling and gentle knocks typical in busy shops. The workshop version designation indicates a design balance between hardness and toughness, giving good surface life while remaining suitable for routine fixturing. The compact 50 mm length and modest mass (approx. 0.1 kg) make the pin easy to handle and position in confined setups, while still providing the rigidity required for consistent contact measurements. Simple integration into inspection and setup routines As a single gauge pin, this component integrates neatly into existing toolsets, jigs and go/no‑go arrangements. Its standardised diameter and controlled tolerance permit interchangeability with calibrated datum pins and gauge sets, allowing simple replacement or expansion of inspection arrays. Delivered ready for transport in a protective case, the pin is protected in transit and storage, which helps preserve the measurement surface and ensures immediate readiness at the workstation. For workshop‑grade accuracy and straightforward application support, contact Metav Werkzeuge for tailored advice and to secure the Metav IndustryLine gauge pin for reliable end‑measurement tasks Technical data Article number: M323.D16 GTIN: 4061905065958 Article name: Gauge pin, single, Ø 13.16 mm, length 50 mm Facts Diameter: 13.16 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version for robust use Delivered in a transport case Category: Gauge pins FAQ What tolerance can be expected from this gauge pin? The gauge pin offers an accuracy of ±0.002 mm; the Metav IndustryLine gauge pin M323.D16 is produced to meet this tolerance for repeatable end‑measurement tasks. Is the material suitable for frequent contact measurements? Yes, the pin is made from special steel and the workshop version is intended for durable, repeated use in inspection and fixturing. Can this pin be used as a datum element in fixtures? The gauge pin’s controlled diameter of 13.16 mm and tight accuracy make it suitable as a datum element within fixture and alignment systems. How is the pin delivered and protected? The product is supplied in a protective transport case to preserve the measurement surface and ensure safe handling during storage and transport. Is the gauge pin compatible with standard gauge sets and mandrels? The standardised diameter and tolerance allow integration with comparable gauge elements and mandrels; the Metav IndustryLine pin M323.D16 can be exchanged within inspection arrays where a 13.16 mm reference is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.17mm Gauge Pin Single 50mm Length, Workshop Version - Metav IndustryLine
Benefit from workshop-grade construction, a precise nominal diameter of 13.17 mm and a tight tolerance of ±0.002 mm for repeatable end‑dimension checks; order this inspection pin directly via Metav Werkzeuge or consult our technical advisors for application support. Gauge pin M323.D17 — inspection pin, 13.17 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin M323.D17 is a workshop-grade inspection pin designed for end‑dimension verification and assembly checks in machine shops and quality departments. Workshop version for robust handling Exact diameter 13.17 mm for end‑measurements 50 mm length for through‑hole and stop checks Special steel construction for wear resistance Precision where production tolerances matter The inspection pin provides consistent reference dimensions thanks to its nominal 13.17 mm diameter and verified accuracy of ±0.002 mm. This level of accuracy makes the component suitable for repeat gauging tasks and spot checks during series production, where a defined tolerance band must be confirmed quickly. The cylindrical geometry ensures stable seating in bores and registers, enabling reproducible results when used as a go/no‑go reference or as a datum for comparative measurement. Built for everyday workshop use with straightforward handling As a workshop version, the pin is engineered for routine use on benches and inside fixtures. The 50 mm length gives sufficient reach for many through‑hole checks and step measurements while remaining easy to handle. Constructed from special steel, the item offers improved resistance to wear compared with untreated pins, which reduces the need for frequent replacement and supports reliable dimensional control over time. Supplied in a protective case, the component arrives ready for storage and safe transport between workstations. Practical specification and application guidance The component suits tasks such as end‑dimension verification, alignment of assemblies and use as a checking mandrel in smaller jigs. Its modest mass and compact form factor permit rapid interchange in measurement routines and integration into manual inspection flows. For traceable quality assurance, the item is identified by article number M323.D17 and GTIN for inventory and calibration records. Where higher integration into automated inspection is required, the pin can be used as a stable mechanical reference within measuring fixtures or comparator setups. Contact Metav Werkzeuge today for personalised advice on workshop gauge pins and to arrange delivery from our Emmerich stock — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M323.D17 GTIN: 4061905065965 Category: Gauge pins Facts Diameter: 13.17 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Material: special steel Workshop execution Delivered in protective case (plastic or wooden) FAQ What measurements is this gauge pin intended for? This gauge pin is intended for end‑dimension verification and related inspection tasks using the gauge pin M323.D17 (inspection pin, Metav IndustryLine, SKU M323.D17). Is the inspection pin suitable for repeated use in production? Yes, the M323.D17 inspection pin is a workshop version made from special steel and designed for repeated use in production checks and fixture applications. How is the pin supplied for transport and storage? The pin is supplied in a protective case, which is intended for safe transport and storage of the gauge pin M323.D17. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.18mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of precision (±0.002 mm), robust workshop‑grade construction, and compact dimensions for reliable reference checks and reduced rework. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.D18 – Ø13.18 mm, length 50 mm (Metav IndustryLine) A gauge pin M323.D18 designed as a workshop reference pin for end‑measure checks and fit verification in production and inspection routines. Workshop‑grade construction Diameter Ø13.18 mm for precise fits Tolerance ±0.002 mm for high accuracy Precise reference that reduces rework and inspection time The Ø13.18 mm diameter and the tight tolerance ±0.002 mm make this pin suitable as a dimensional reference for go/no‑go checks and end‑measure verification. By using a clearly defined reference gauge, measurement uncertainty is reduced and setup times at inspection stations are shortened. The controlled dimension and repeatability assist in avoiding costly rework by ensuring components meet fit requirements before assembly. Robust construction for daily workshop use Built in a workshop‑grade execution from special steel, the pin balances wear resistance with machinability to withstand frequent handling. The 50 mm length gives a stable bearing surface for fixtures and mating bores, while a compact mass supports easy handling on the shop floor. The design suits repeated insertion and withdrawal cycles typical of inspection benches, prolonging usable life and keeping maintenance intervals low. Streamlined integration into production and QA workflows As a single, traceable reference item, the pin works well in fixture checks, calibration jigs and comparative gauging. The combination of defined diameter, length and measured accuracy fits industrial metrology procedures and can be archived as a reference standard within quality records. Using a dedicated gauge pin for end‑measure tasks simplifies traceability and aligns with routine quality control steps, enabling consistent pass/fail decisions. Measurable benefits for process reliability Adopting a dedicated gauge pin like this supports faster decisions at the inspection stage and reduces downstream variability in assembly. The compact format suits bench testing and fixture validation, while the industrial tolerance helps maintain interchangeability of mating parts. These measurable improvements in throughput and quality control contribute directly to lower scrap rates and more predictable production output. For workshop reference gauges from Metav IndustryLine, consult Metav Werkzeuge in Emmerich for specification matching and logistical support — Metav Werkzeuge assists with application advice and order fulfilment. Technical data Article number: M323.D18 GTIN: 4061905065972 Manufacturer: Metav IndustryLine Data Diameter: 13.18 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg ECLASS: 21170231 Special features Material: Special steel Workshop execution Single piece delivery Suitable for end‑measure and reference checks FAQ What accuracy can be expected from this gauge pin? The gauge pin M323.D18 is specified with a tolerance of ±0.002 mm, providing a high‑precision reference for fit and end‑measure tasks. Is the pin suitable for repeated bench inspections? Yes, the workshop‑grade construction and special steel material make the pin appropriate for frequent insertion and withdrawal cycles in inspection routines. Can this pin be used as a reference in fixture validation? Using the M323.D18 as a reference gauge supports fixture validation and helps ensure mating bores meet required dimensions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.19mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-grade durability, micrometre-level tolerance and a compact 50 mm length for reliable reference measurements in fixture set-ups. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.D19 — precision checking pin, 13.19 mm Ø, 50 mm length (Metav IndustryLine) The Gauge pin M323.D19 is a single, workshop-grade checking pin designed for precise end‑measure and reference tasks in inspection, jigs and fixture alignment across metalworking environments. Workshop version for everyday use Diameter 13.19 mm for precise fits Length 50 mm for stable engagement Tolerance ±0.002 mm for repeatable checks Consistent reference measurements with micrometre-level control As a dedicated gauge pin, this checking pin provides a compact reference element for repeatable positioning and go/no‑go checks. The nominal 13.19 mm diameter combined with a declared tolerance of ±0.002 mm ensures measurements that support narrow process windows and stable quality control. When used for end‑measure or alignment operations, the short, rigid body reduces lever‑induced error and maintains repeatability across successive checks, which in turn lowers rework rates and shortens inspection cycles. Robust workshop construction to reduce downtime Built as a workshop version, the pin is manufactured from Special steel that balances surface hardness with resistance to deformation in daily use. The 50 mm length gives secure engagement in holders and jigs without excess overhang, keeping handling simple and safe. This combination of material and geometry delivers dependable precision under regular operational stress, reducing the need for frequent replacement and helping to keep inspection benches operational for longer periods. Seamless integration into inspection and fixture workflows Marked and stocked under SKU M323.D19 with GTIN 4061905065989, this single‑piece checking pin fits standard holders and reference bores used in routine quality checks and set‑ups. The compact form factor makes it easy to include in inspection kits or to use as a datum pin for small assemblies. Traceable identification supports inventory and traceability procedures, while the clear specification enables planners and quality engineers to select the correct diameter and tolerance for their gauge sets and master layouts. Contact Metav Werkzeuge for precise application advice and secure the M323.D19 from Metav IndustryLine for your inspection set‑up; our team in Emmerich is ready to assist with technical details and availability Technical data SKU: M323.D19 GTIN: 4061905065989 Material: Special steel Article: Gauge pin, single Facts Diameter: 13.19 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Single piece delivery Intended use: end‑measure / reference pin Category: Gauge pins FAQ What is the exact diameter tolerance of this checking pin? The checking pin is specified with a diameter of 13.19 mm and a tolerance of ±0.002 mm, providing micrometre‑level control for reference measurements. Can the M323.D19 be used in standard pin holders and jigs? Yes, the M323.D19 is designed for compatibility with common holders and fixture bores used for positioning and reference tasks in machine shops. What material is the pin made from and why does that matter? The pin is made from Special steel; this material offers a balance of hardness and toughness suited to everyday workshop use and helps resist deformation during repeated engagement. Is the product supplied as a single item or in sets? This entry refers to a single gauge pin supplied individually, making it convenient to replace specific diameters within an existing kit. How is the M323.D19 identified for inventory and traceability? The product carries the SKU M323.D19 and GTIN 4061905065989, which can be used for procurement records and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.1mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
With its combination of workshop-grade construction, ±0.002 mm positional accuracy and a compact 50 mm length, reliable end‑size checks become routine. The single 13.1 mm gauge pin is supplied in a protective transport case for safe handling — order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin M323.D10 — single test pin, Ø 13.1 mm, 50 mm length (Metav IndustryLine) A Metav IndustryLine gauge pin designed as a single reference pin for quick, repeatable end‑dimension and go/no‑go checks in workshop environments. Workshop version for robust daily use Diameter 13.1 mm precision ground Tolerance ±0.002 mm certified Delivered in protective transport case Precision that stabilises inspection workflows The compact reference pin delivers high repeatability through a marked tolerance of ±0.002 mm, which reduces uncertainty in routine control tasks. As a hardened, precision‑ground pin with a 13.1 mm nominal diameter and 50 mm usable length, it is suitable for repeat checks where tight radial and axial positioning matter. The clear metrological specification supports traceable sampling and improves decision accuracy on acceptance or rework — an advantage in serial production and maintenance contexts. Built for workshop conditions and fast handling Named for workshop use, this execution combines a sturdy profile and straightforward handling to withstand frequent extraction and insertion. The robust construction and finish limit sensitivity to knocks and contamination compared with delicate laboratory gauges. The compact dimensions enable rapid placement in fixturing or bench checks, so measuring cycles remain efficient without complex setup. The practical design therefore enhances uptime and keeps inspection points short and predictable. Material choice and protective delivery reduce downtime Manufactured from special steel, the pin balances wear resistance with dimensional stability under normal shop conditions. Surface grinding ensures consistent contact geometry; the protective transport case provided minimises the risk of nicks or corrosion during storage and transport. Together, material selection and packaging extend service life and reduce unplanned replacements, supporting predictable inventory planning in the workshop. Traceability, application and ordering made straightforward Identification and logistic handling are simplified by the product labelling and GTIN reference, which aid stock control and reordering. For typical use, the pin serves as a reference element for end‑dimension checks, plug gauges in assemblies, and verification of bores or mandrels where a fixed diameter core is required. The compact format and certified tolerance make it particularly suitable when space is limited but measurement confidence must remain high. For workshop applications that require compact reliability, choose the Metav IndustryLine gauge pin M323.D10 with ±0.002 mm accuracy — contact Metav Werkzeuge in Emmerich for ordering and technical assistance. Technical data Article number: M323.D10 GTIN: 4061905068157 Label: Test pin, single, 13.1 mm, length 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 13.1 mm Length: 50 mm Weight: 0.1 kg Accuracy / tolerance: ±0.002 mm Special features Material: Special steel Version: Workshop execution Packaging: Delivered in protective transport case SKU: M323.D10 FAQ What is this gauge pin used for? The gauge pin M323.D10 is used as a reference element for end‑dimension checks, bore verification and quick go/no‑go assessments in workshop inspection routines. Does the pin come with protective packaging? Yes, the Metav IndustryLine gauge pin is supplied in a protective transport case to prevent damage during storage and transit. What level of accuracy can be expected from this pin? The single test pin is specified with a positional tolerance of ±0.002 mm, providing high repeatability for routine checks. Which material is the pin made from? The pin is manufactured from special steel, chosen to provide a balance of wear resistance and dimensional stability for workshop use. Is this pin suitable for serial production control? Yes, the compact size and certified tolerance make the pin suitable for repeatability checks in series production and maintenance operations. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.21mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Compact, workshop-ready precision for routine inspection: a single gauge pin with a 13.21 mm diameter, 50 mm overall length and a tolerance of ±0.002 mm for reliable end-measure checks; order directly via Metav Werkzeuge or consult our technical advisors for application advice. M323.D21 gauge pin — 13.21 mm diameter, 50 mm length, special steel by Metav IndustryLine The M323.D21 gauge pin is a single test pin designed for precise end-measure checks and fit testing in workshop and production environments; it serves as a compact, robust solution where reproducible diameters and dependable contact geometry are required. Workshop version for robust daily use Diameter 13.21 mm for end-measure verification Tolerance ±0.002 mm for high repeatability Delivered in a plastic or wooden transport box Consistent fit checks with industrial repeatability The M323.D21 is engineered as a gauge pin for routine dimensional verification where repeatability and simple handling matter. Its 13.21 mm nominal diameter and declared ±0.002 mm tolerance make it suitable for quick go/no-go or comparative checks on bores and holes, supporting quality control processes on the shop floor. Because the pin is crafted from special steel, it maintains geometry under typical workshop loads and resists wear better than generic steels, which keeps inspection results stable over many cycles. Practical benefits for production and jig setup Featuring a 50 mm overall length, the pin gives sufficient engagement for most fixture and bore checks without excess overhang, balancing reach and stiffness. The workshop specification emphasises durability and ease of use, reducing downtime for handling and cleaning between measurements. When used as part of an inspection routine, the plug-style pin simplifies go/no-go assessment and speeds up setup tasks, improving throughput while keeping measurement uncertainty low — a rational efficiency gain for repetitive quality procedures. Material and handling considerations Made from special steel, the pin offers a reliable contact surface for tactile and optical comparison methods. The hardened surface reduces the rate of dimensional drift caused by surface wear; however, regular inspection against a master gauge is recommended for critical applications. Delivered in a protective plastic or wooden transport box, the single pin is kept secure in transit and storage, reducing the risk of damage to the polished measuring face and maintaining the intended measuring performance for longer. For dependable tolerance verification and workshop-proof handling, request the M323.D21 from Metav Werkzeuge's Emmerich warehouse or contact our consultants for tailored guidance and immediate delivery information Technical data Article number: M323.D21 GTIN: 4061905066283 Brand: Metav IndustryLine Category: Gauge pin (Messstifte) Material: Special steel Numbers / Core technical data Nominal diameter: 13.21 mm Overall length: 50 mm Mass: 0.1 kg Tolerance: ±0.002 mm Special features / Versions Workshop version for robust daily use Single gauge pin delivery Delivered in a plastic or wooden transport box FAQ What is the intended use for this gauge pin? The M323.D21 gauge pin is intended for end-measure checks, fit testing and quick go/no-go verifications in workshop and production settings. Is the material suitable for heavy-duty inspection tasks? Yes, the pin is made from special steel, which provides enhanced wear resistance and stable contact geometry for routine inspection tasks. How precise is the diameter of the gauge pin? The M323.D21 is specified to a tolerance of ±0.002 mm, offering high repeatability for dimensional checks. Does the product come protected for transport? The gauge pin is delivered in a plastic or wooden transport box to protect the measuring end and surface finish during transit and storage. Can the M323.D21 be used for fixture setup and jig alignment? Yes, the 50 mm length and robust workshop design make this pin suitable for fixture setup, alignment and repetitive bore checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.22mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
Benefit from the combination of ±0.002 mm repeatability, a precisely ground 13.22 mm diameter and a compact 50 mm length for dependable end‑dimension checks; order the M323.D22 directly via Metav Werkzeuge or contact the consultants for individual application support. Test pin, single, 13.22 mm, 50 mm length — Metav IndustryLine Test pin, single, 13.22 mm, 50 mm length is a workshop‑grade gauge pin designed for accurate end‑dimension inspection and fixture verification in production and quality‑control environments Workshop version, robust construction Diameter 13.22 mm, ground to tolerance High reproducibility: ±0.002 mm accuracy Reliable dimensional control for production inspections This workshop‑grade gauge pin is specified with a nominal diameter of 13.22 mm and a shank length of 50 mm, offering a compact geometry that simplifies insertion into fixtures and gauges. The documented positional tolerance of ±0.002 mm reflects high reproducibility across repeated checks and supports reliable go/no‑go verification and end‑dimension control. For production environments where fast, repeatable measurements reduce downstream rework, the combination of tight diameter control and short engagement length provides a practical balance between accessibility and measurement stability. Designed for consistent fit in gauges and fixtures The single‑piece format and precise outer diameter ensure consistent interfacing with bores, plug gauges and alignment jigs. The robust workshop execution reduces sensitivity to everyday handling without sacrificing dimensional integrity, so the pin remains a dependable reference during assembly and inspection tasks. Where interchangeability and tight fits matter, the measured tolerance minimises variability between pins and supports stable statistical process control (SPC) routines on the shop floor. Practical handling, traceability and sourcing Supplied as an individual test pin (M323.D22) and manufactured from a special steel, this component keeps inventories simple for maintenance and QA stocking. The modest mass facilitates quick manual use while the compact length aids access in confined fixtures. For further technical drawings, specific fit recommendations or batch traceability requests, Metav Werkzeuge provides detailed information and procurement options to support workshop integration and quality documentation. Contact Metav Werkzeuge for tailored supply of Metav IndustryLine test pins and expert advice on gauge integration and batch availability. Technical data Article number: M323.D22 GTIN: 4061905066962 ECLASS: 21170231 Facts Diameter: 13.22 mm Length: 50 mm Mass: 0.1 kg Dimensional accuracy: ±0.002 mm Special features Material: Special steel Version: Workshop execution Packaging: single item delivery FAQ What tolerance does the pin offer for precision checks? The test pin is specified with a dimensional accuracy of ±0.002 mm, which supports high repeatability for fine end‑dimension inspections. Is the material suitable for standard gauge applications? Yes, the M323.D22 is manufactured from a special steel aimed at workshop use and is suitable for typical gauge and fixture interfaces. Can the pin be used for alignment in fixtures as a reference element? The compact 50 mm length and precise 13.22 mm diameter make this gauge pin appropriate for use as a reference element in alignment and jigging applications. Is the item delivered as a single piece or in sets? This product is supplied as a single test pin (M323.D22), simplifying replacement and stocking in quality departments. How does the workshop version differ from a laboratory grade pin? The workshop version emphasises robustness for everyday handling while retaining tight dimensional control suitable for production inspection tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.23mm Gauge Pin, Single, 50mm Length, Special Steel, Workshop Version, Supplied in Case - Metav IndustryLine
Take advantage of the combination of industrial robustness, tight tolerance and traceable identification for reliable inspection routines; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge pin, single – 13.23 mm Ø, 50 mm length (Metav IndustryLine) The gauge pin, single, 13.23 mm Ø, 50 mm length is a precision end‑measurement pin designed for workshop inspection and dimensional verification in production and quality control environments. Workshop version for robust use Precision tolerance ±0.002 mm Special steel construction 50 mm length with 13.23 mm diameter High precision for repeatable checks A compact inspection component that secures measurement chains: the gauge pin delivers precision at a ±0.002 mm tolerance, making it suitable for fine verification of bore diameters, end‑measure checks and gauge blocks. The tight tolerance reduces inspection uncertainty and shortens decision loops on the shop floor, so production problems can be detected earlier. The small footprint of the pin speeds handling and alignment in test jigs, supporting efficient in‑process and final inspection routines. Durable workshop design that withstands everyday use Engineered as a workshop version, this test pin combines practical handling with material robustness. The body is manufactured from special steel, which provides the stiffness needed for repeatable contact without excessive deformation; the part weight of 0.1 kg and its 50 mm length make it easy to place and extract in confined setups. The solid construction supports repeated seating in bores and fixtures, reducing wear-related measurement drift and helping to maintain stable inspection results over many cycles. Traceability and clear identification for quality systems Component identification is ready for industrial stockkeeping: M323.D23 is the internal article number and GTIN 4061905066979 provides a unique global identifier for procurement and traceability. The single‑item delivery simplifies selection for specific end‑measure checks and avoids mix‑ups in mixed sets of gauge pins. Supplied as a single gauge pin in the Messstifte category, this component integrates cleanly into quality documentation and part lists, helping to maintain orderly inspection records across shifts and production sites. Contact Metav Werkzeuge today to discuss the suitability of the Metav IndustryLine gauge pin M323.D23 for your inspection processes or to request a technical data sheet — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.D23 GTIN: 4061905066979 Manufacturer: Metav IndustryLine Facts Length: 50 mm Diameter: 13.23 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Execution: Workshop version Single item delivery Category: Messstifte FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.D23 is specified with a tolerance of ±0.002 mm, suitable for tight dimensional checks and precise go/no‑go comparisons in inspection tasks. Which material is used for the pin? The pin is made from special steel, chosen for rigidity and repeatable contact behaviour under normal workshop use. For which inspection tasks is this pin suitable? Typical uses include end‑measurement verification, bore checks and comparative testing in fixture and jig inspections where a precise reference diameter is required. Is this an individual item or part of a set? This product is supplied as a single gauge pin (single item delivery) intended for direct integration into bespoke inspection routines or for topping up existing pin assortments. How is the product identified for procurement and traceability? Use article number M323.D23 and GTIN 4061905066979 for ordering and inventory management; these identifiers ensure consistent traceability within quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.24mm Gauge Pin Length 50mm Workshop Version, Special Steel - Metav IndustryLine
This compact gauge pin combines workshop durability, a tight ±0.002 mm tolerance and a useful 50 mm overall length to support reliable end‑measure checks and fixture alignment. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.D24 — individual precision pin, Ø13.24 mm, 50 mm length (Metav IndustryLine) The gauge pin M323.D24 is a workshop‑grade precision test pin designed for end‑measure verification and fixture probing in machine shops and inspection benches. Workshop version for daily use Diameter 13.24 mm with ±0.002 accuracy 50 mm overall length for fixture testing Supplied in protective transport case Accurate dimensions for repeatable Go/No‑Go checks The pin is manufactured to a nominal diameter of 13.24 mm with a verified ±0.002 mm deviation, which makes it suitable for tasks that demand tight dimensional control. This level of accuracy supports consistent duplicate measurements and reduces rework by ensuring parts and fixtures meet defined limits. The compact geometry and defined length make the component straightforward to seat in gauges, jigs or mating holes, improving throughput in verification routines while maintaining traceable measurement quality. Robust construction that suits everyday workshop use Made from special steel, the pin is produced as a workshop version that balances wear resistance and handling robustness. The material choice and simple single‑piece design minimise the risk of deformation during repeated contact checks, supporting longevity in busy production environments. Supplied in a protective transport case, the component remains organised and protected in tool kits or inspection sets, reducing the chance of surface damage that could impair measurement fidelity. Easy integration into inspection and setup workflows As an individual gauge pin, the component is ideal for end‑measure and fixture alignment operations where a single, accurately sized reference is required. Its 50 mm length provides a practical reach for many clamping and probe situations without excess overhang, while the compact diameter simplifies storage and handling. The pin functions as a reliable reference for quick pass/fail checks or as a component of modular test sets, helping to speed up setup time and improve the reproducibility of routine inspection tasks. For workshop inspection components and dependable supply, request the M323.D24 from Metav Werkzeuge in Emmerich or consult our technical team via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.D24 GTIN: 4061905066986 Material: Special steel Weight: 0.1 kg Facts Diameter: 13.24 mm Length: 50 mm Tolerance: ±0.002 mm Special features Workshop version Single gauge pin Supplied in protective transport case Category: Gauge pins FAQ What applications is this gauge pin suited for? The gauge pin is intended for end‑measure checks, fixture alignment and plug‑type verification in machine shops and inspection benches; it serves as a compact reference pin for assembly and inspection tasks. How precise is the diameter of the pin? The diameter is specified at 13.24 mm with a deviation of ±0.002 mm, providing the dimensional precision required for tight control and repeatable measurements. What material is used for the pin? The pin is manufactured from special steel, chosen for workshop durability and stable dimensional behaviour under regular use. Is the pin supplied ready for transport and storage? Yes, the item is supplied in a protective transport case suitable for workshop handling and short‑term storage to prevent contact damage. Can this pin be used in modular gauge sets? The single gauge pin is compatible with common modular setups and can function as a standalone reference or as part of a combined inspection kit. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.25mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, tight dimensional tolerance and compact handling for reliable end‑dimension checks in production. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for application guidance. Gauge pin, single, 13.25 mm diameter — 50 mm length (Metav IndustryLine) The gauge pin 13.25 mm is a workshop‑grade precision pin for quick end‑dimension checks, fit testing and go/no‑go verification in manufacturing and inspection environments. Workshop‑grade construction Diameter 13.25 mm precision 50 mm overall length Dimensional tolerance ±0.002 mm Accurate checks without guesswork For process control and batch inspection, the gauge pin delivers measurable certainty: a dimensional tolerance of ±0.002 mm means the pin is suitable where fine tolerances matter and where repeatability reduces rework. The stated accuracy supports tight fit assessments and calibration checks; the nominal diameter 13.25 mm serves as a verifiable reference for hole gauges, fixtures and assembly trials. Explaining the figure: the tolerance reflects the maximum deviation from nominal diameter, ensuring that measurements remain within the expected production window and simplifying go/no‑go decisions on the shop floor. Durable workshop design for daily use Built as a workshop‑grade item from special steel, the pin is designed for repetitive handling and robust service life in industrial settings. The compact 50 mm length balances reach and stiffness, making the pin easy to seat and remove without excessive flex. With a listed mass of 0.1 kg the component is stable in holders and benches yet straightforward to manoeuvre by hand. Supplied in a protective transport case, the pin arrives ready for storage and safe transit between stations, preserving dimensional integrity between uses. Practical integration into quality workflows Traceability and identification are supported by the supplied SKU and GTIN, which simplify stock control and record keeping for incoming inspection and tool rooms. As a single‑piece precision reference, this pin reduces set‑up time for functional checks and integrates directly into existing gauge blocks, pins holders and dedicated inspection fixtures. The combination of compact dimensions, high repeatability and workshop robustness delivers an efficient solution for routine inspection tasks while contributing to a reduction in scrap and downtime. Contact Metav Werkzeuge today for application advice and reliable supply of the Metav IndustryLine gauge pin (M323.D25) for your inspection processes Technical Data Article number: M323.D25 GTIN: 4061905066993 Description: Gauge pin, single, 13.25 mm diameter, 50 mm length Manufacturer: Metav IndustryLine Facts Diameter: 13.25 mm Length: 50 mm Weight: 0.1 kg Dimensional tolerance: ±0.002 mm Special features Material: Special steel Workshop version Supplied in protective transport case FAQ What tolerance can be expected from this gauge pin? The gauge pin is specified with a dimensional tolerance of ±0.002 mm, ensuring high repeatability for end‑dimension checks and fit testing with the Metav IndustryLine pin. Is the pin suitable for mounting in common pin holders? Yes, the single gauge pin is intended for integration with standard pin holders and fixture systems and is identified as SKU M323.D25 for ordering. What material is used for the pin and how does it affect wear? The pin is made from special steel; this provides a balance of hardness and toughness appropriate for workshop use while offering durable surface life under normal inspection loads. Does the product include any transport or storage protection? The gauge pin is supplied in a protective transport case to preserve geometry during transport and storage, reducing the risk of handling damage. How is the item identified for procurement and inventory? Refer to GTIN 4061905066993 and SKU M323.D25 when ordering or logging the part in inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.26mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of workshop-ready accuracy and robust construction: the combination of a 13.26 mm nominal diameter, ±0.002 mm tolerance and a 50 mm usable length ensures repeatable bore checks and fewer rework cycles. Order directly via Metav Werkzeuge or consult our specialists for specification support. Gauge pin, single, 13.26 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin, single, 13.26 mm diameter, 50 mm length is a precision inspection pin designed for manual and quick verification of bore diameters in workshop and production-control environments. Workshop-grade construction for everyday use Nominal diameter 13.26 mm for end‑size checks Tolerance ±0.002 mm for high precision Delivered in a protective case for safe transport Reliable results for inline inspection The gauge pin M323.D26 delivers a clearly defined checking diameter of 13.26 mm with a nominal tolerance of ±0.002 mm, making it suitable for routine dimensional control where consistent conformity is required. The tight tolerance reduces measurement uncertainty and supports faster acceptance or rejection decisions on the shop floor, which helps to cut scrap rates and improves process stability in machining and assembly operations. Robust workshop design and straightforward handling Manufactured from special steel and built as a workshop execution, this inspection pin combines durability with easy handling. The 50 mm usable length provides sufficient engagement for many through‑bores and shallow blind holes without unnecessary overhang. At approximately 0.1 kg, the pin is convenient to handle during manual checks and is supplied in a protective case to prevent transport damage and to keep the gauge ready for immediate use. Traceability and practical use in production control The article is listed as M323.D26 (GTIN 4061905067006), which supports clear part identification in stock management and quality documentation. As a single gauge pin it is intended for direct dimensional checks and end‑size verification in fixtures, jigs and incoming inspection. Using a dedicated inspection pin for these tasks speeds up routine checks and complements existing measuring equipment in the inspection workflow. For workshop-ready precision from Metav IndustryLine, request technical advice or place an order with Metav Werkzeuge—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.D26 GTIN: 4061905067006 Label: Gauge pin, single, 13.26 mm diameter, 50 mm length Category: Gauge pins (Messstifte) Core specifications Diameter: 13.26 mm Usable length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Features / Applications Material: Special steel Workshop execution Delivered in protective case for transport Intended for end‑size and bore verification in production control FAQ What nominal diameter does the gauge pin provide? The gauge pin M323.D26 provides a nominal diameter of 13.26 mm for precise bore checks. What tolerance can be expected from this inspection pin? This inspection pin is specified with a tolerance of ±0.002 mm to support high repeatability in workshop inspections. Which material is used for the pin? The pin is manufactured from special steel and supplied in a workshop execution suitable for routine use. Is the pin supplied protected for transport? Yes, the gauge pin is delivered in a protective case to reduce the risk of damage during transport. What applications suit this gauge pin best? The pin suits manual inspection of hole diameters, end‑size verification and quick pass/fail checks in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.27mm Test Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Benefit from precise end‑measure verification thanks to ±0.002 mm repeatability and a robust special‑steel construction; the compact 50 mm length with 13.27 mm diameter makes the pin ideal for routine inspection tasks. Order the item directly via Metav Werkzeuge or consult our advisors for specification matching. Gauge Pin M323.D27 — 13.27 mm diameter, 50 mm length (Workshop version) Gauge Pin M323.D27 designed for dimensional checks and end‑measurement verification in workshop and inspection environments Workshop version for robust daily use Diameter 13.27 mm for end‑measure verification Hardened special steel construction Delivered in protective transport case Reduce rework with micrometre‑grade repeatability The compact gauge pin offers a verified measuring tolerance of ±0.002 mm, which translates into reliable dimensional checks and fewer repeat measurements. For production and quality control, such precision reduces the incidence of scrap and rework by catching deviations early. The clearly defined 13.27 mm diameter provides a stable reference for plug checks and comparative gauging, improving process stability. Built to withstand workshop handling and transport Constructed from special steel, the pin sustains repeated use in routine inspection and assembly work. The 50 mm measuring length balances accessibility and rigidity, keeping deflection to a minimum while remaining easy to handle. Delivered in a protective transport case, the unit arrives ready for safe storage and mobility between workstations, ensuring the measuring surface remains protected and consistent over time. Integrates easily into inspection routines and fixtures The plain design supports simple fixture integration for repeat gauging operations or end‑of‑line checks. Its nominal dimensions and workshop version specification make it suitable for inline verification and manual quality stations, where quick, repeatable verification is required. Stocking the Metav IndustryLine pin streamlines sourcing and ensures a consistent, European‑filtered quality standard for regular inspection tasks. Request the Metav IndustryLine gauge pin M323.D27 through Metav Werkzeuge for a reliable addition to inspection benches, or contact our specialists in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice Technical data Article number: M323.D27 GTIN: 4061905067884 SKU: M323.D27 Facts Diameter: 13.27 mm Measuring length: 50 mm Tolerance: ±0.002 mm Weight: 0.10 kg Special features Material: Special steel Workshop version Delivered in protective transport case FAQ What applications is this gauge pin suitable for? The gauge pin M323.D27 (Metav IndustryLine) is intended for end‑measure verification, plug checking and routine dimensional control in workshop and inspection settings. What material is the pin made from? The M323.D27 is manufactured from special steel, chosen for wear resistance and stability under repeated use. How precise is the measurement tolerance of the pin? The Metav IndustryLine gauge pin M323.D27 is specified with a measurement tolerance of ±0.002 mm, suitable for fine inspection tasks. Is the pin supplied ready for transport and storage? Delivery of the M323.D27 includes a protective transport case, ensuring the measuring face remains protected during handling and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13.28mm Gauge Pin, 50mm Length, Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Compact precision and robust workshop performance combine in this gauge pin: 13.28 mm nominal diameter, 50 mm length and a manufacturing tolerance of ±0.002 mm ensure repeatable referencing and dependable fit checks. Supplied in a protective transport case and made from special steel, it is ready for routine inspection work. Order the part directly via Metav Werkzeuge or contact our consultants for application advice. Test Pin M323.D28 – Gauge pin, 13.28 mm Ø, 50 mm length (Metav IndustryLine) A Test Pin M323.D28 designed for precise end‑measurements and repeatable reference points in workshop metrology and inspection tasks. Workshop-grade construction Diameter 13.28 mm for tight fits Length 50 mm for deep reference points Tolerance ±0.002 mm for high repeatability Dependable tolerance for repeatable results The gauge pin is manufactured to a fine dimensional tolerance of ±0.002 mm, which translates directly into reduced scatter during go/no‑go checks and quicker decision cycles at the inspection bench. Such repeatability benefits process control by lowering rework rates and easing documentation of conformity. The stated accuracy is suitable for demanding workshop metrology where confident pass/fail judgements are required. Compact geometry that suits fixturing and gauges With a nominal diameter of 13.28 mm and a working length of 50 mm, the pin offers a compact form that fits many plug checks, fixture locators and assembly gauges. The moderate length provides access into pockets or stepped bores while maintaining stiffness for reliable contact. The component’s workshop specification and special steel construction support long service life under regular use, making it a practical tool for machining and inspection workflows. Practical delivery and handling for the shop floor Supplied in a protective case for transport, the pin arrives ready to be stored and moved without additional packing. The workshop execution emphasises robustness and ease of handling: the compact mass and finished surfaces simplify insertion and extraction during repetitive checks. Where traceability or records are needed, the goods can be integrated into existing inspection routines without lengthy preparation. For consistent gauge references request the M323.D28 from Metav IndustryLine via Metav Werkzeuge — Metav’s Emmerich team can advise on integration and supply at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.D28 GTIN: 4061905067891 Manufacturer: Metav IndustryLine Facts Nominal diameter: 13.28 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Supplied in a protective transport case FAQ What tolerance can be expected from this gauge pin? The M323.D28 test pin is manufactured to a tolerance of ±0.002 mm, ensuring tight repeatability for workshop inspection tasks. Is the pin suitable for use in fixtures and gauges? Yes, the pin’s 13.28 mm diameter and 50 mm length make it well suited as a locating or reference element in gauges and fixtures; the workshop execution supports regular use. What material is the pin made from and how does that affect wear? The pin is made from special steel, which provides a durable contact surface and good resistance to wear under normal inspection cycles. Is the pin delivered ready for storage and transport? The product is supplied in a protective transport case, which simplifies handling and protects the pin during storage and movement. Can this pin be used for tight fit checks and end‑measurements? The dimensional specification and fine tolerance make the product suitable for tight fit checks and reliable end‑measurement references in many shop applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com