Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
50 mm 16.46 mm Test Pin Workshop Version, Special Steel - Metav IndustryLine
Combining workshop‑grade durability, a tight ±0.002 mm tolerance and a compact 50 mm length, this gauge pin delivers reliable reference measurements for end‑measure checks and plug inspections; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.G46 – 16.46 mm diameter, 50 mm length (Metav IndustryLine) A Gauge pin M323.G46 created for precise end‑measure and plug checks in workshop and production inspection routines. Workshop‑grade design for robust use Diameter 16.46 mm precision ground Tolerance ±0.002 mm for tight checks 50 mm overall length for standard fixtures Supplied in protective case for transport Reliable reference measurements for end‑measure checks The plug‑style measuring pin is intended as a reference for dimensional checks where reproducibility matters. Machined from special steel and ground to a precise diameter of 16.46 mm, the component offers a verified runout and a repeatable contact surface suited to routine inspection and go/no‑go verification. With an indicated concentricity tolerance of ±0.002 mm, this tool supports quality control tasks that demand narrow acceptance bands without requiring complex fixtures. The compact design keeps thermal mass low, reducing dimensional drift during short inspection cycles. Built for durability and straightforward handling Designed as a workshop‑grade instrument, the pin balances robustness with ergonomic handling. At roughly 0.15 kg, the item is easy to position in fixtures or bores, while the 50 mm overall length provides sufficient engagement for common end‑measure scenarios without excessive overhang. Surface treatment and the selected special steel composition improve wear resistance and ensure a stable contact geometry over many inspection cycles. Delivery includes a protective case, intended for safe transport between workstations and for basic protection against knocks and contamination during storage. Fits into inspection workflows and reduces uncertainty Integration into existing measuring routines is straightforward: the pin functions as a reference gauge for plug checks, end‑dimension verification and comparative inspections alongside dial indicators, calipers or bespoke fixtures. The compact footprint supports handheld use as well as fixture mounting; its precision makes it suitable for serial spot checks in production and for acceptance procedures in workshop maintenance. Identification data such as SKU and GTIN facilitate inventory tracking and procurement, helping to sustain traceability across quality documentation and process records. For specification support or to order the Metav IndustryLine gauge pin M323.G46, contact Metav Werkzeuge for tailored advice and supply arrangements. Technical data Article number: M323.G46 GTIN: 4061905068508 Label: Prüfstift, einzeln, 16,46 mm Länge 50 mm Numbers / Core technical data Diameter: 16.46 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Designs / Special features Material: Special steel Workshop execution Supplied in protective case Category: Gauge pins FAQ What is the dimensional tolerance of the gauge pin? The gauge pin is specified with a tolerance of ±0.002 mm, making it suitable for tight go/no‑go checks and reference measurements. Is the pin suitable for heavy workshop use? Yes, the workshop‑grade finish and special steel construction mean the pin is intended for routine inspection tasks and robust handling. How is the product delivered for transport and storage? The item is supplied in a protective case to safeguard the measuring surface during transport between workstations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm 18.29 mm Gauge Pin Single, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precise dimensional control and robust workshop design to speed up routine inspection and reduce rework. The combination of a tight radial tolerance and durable special steel ensures reliable fit checks and long service life. Order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin, single, Ø 18.29 mm — 50 mm length (Metav IndustryLine) The Gauge pin Ø 18.29 mm, length 50 mm is a workshop-grade precision pin for end‑size checks and fit verification in quality control and inspection workflows. Workshop-grade design for routine inspection Diameter Ø 18.29 mm, length 50 mm Special steel construction for durability Radial tolerance ±0.002 mm for tight fits Consistent accuracy for repeatable inspection results Manufactured for routine dimensional checks, this pin delivers high repeatability thanks to a radial tolerance of ±0.002 mm. Such a specification reduces ambiguity in pass/fail decisions during incoming inspection or in-process spot checks, thereby cutting down on rework and inspection time. The compact geometry supports quick seating in holders or jigs, enabling faster batch sampling without compromising measurement integrity. Built to withstand workshop use The item is produced from special steel in a workshop‑grade design that balances hardness with resilience. A nominal length of 50 mm and a weight of 0.15 kg create a stable feel in handling and positioning. This robustness translates into fewer tool changes and longer intervals between replacements, which supports uninterrupted production cycles and lowers lifetime handling costs for the inspection bench. Easy integration into existing inspection procedures As a single gauge pin it is suited for end‑size verification, plug and clearance checks, and fit confirmation within assemblies. The geometry is compatible with standard pin holders and test fixtures, so it can be introduced into established workflows without major fixture redesign. By streamlining the verification step, the part helps maintain throughput while preserving dimensional control across batches. Contact Metav Werkzeuge today to specify Metav IndustryLine workshop-grade gauge pins and ensure fast delivery from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.I29 GTIN: 4061905070891 SKU: M323.I29 Core data Diameter: 18.29 mm Length: 50 mm Weight: 0.15 kg Tolerance: ±0.002 mm Features / Application Workshop version Special steel Single gauge pin for end‑size checks Category: gauge pins (messstifte) Intended use: fit verification, plug checks FAQ What tolerance does the gauge pin offer? The gauge pin (gauge pin, single, Ø 18.29 mm, length 50 mm) is specified with a radial tolerance of ±0.002 mm, allowing tight fit and clearance verification. Can this pin be used in standard pin holders and fixtures? Yes, the single gauge pin from Metav IndustryLine is designed for compatibility with common pin holders and test fixtures used in routine quality control. Is the material suitable for workshop environments? The plug is made from special steel and supplied as a workshop‑grade item, which provides durability appropriate for frequent handling and inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.12 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
Precision end-dimension control combined with robust workshop construction ensures consistent inspection results and long service life. Use the nominal 10.12 mm diameter, a precise ±0.002 mm tolerance and the 50 mm shank to standardise routine checks. Order the gauge pin M323.A12 directly via Metav Werkzeuge or ask our consultants if needed. M323.A12 gauge pin — single inspection pin, 10.12 mm diameter, 50 mm length (Metav IndustryLine) M323.A12 gauge pin is a single inspection pin designed for accurate end‑dimension verification and everyday workshop use. High-precision ±0.002 mm tolerance Diameter 10.12 mm, length 50 mm Workshop-grade special steel construction Reduce rework with repeatable, measurable accuracy This inspection pin provides reproducible measurements for end‑dimension checks thanks to its ±0.002 mm manufacturing tolerance. The tight tolerance is meaningful in applications where minute deviations lead to assembly problems or part rejection: using a measured reference pin reduces subjective assessment and supports objective quality decisions. In practice, a consistent reference standard accelerates pass/fail decisions on production lines and minimises rework cycles, contributing to measurable time savings in quality control routines. Built for everyday use in demanding environments Constructed from special steel in a workshop‑grade design, the pin withstands frequent handling while maintaining dimensional stability. The 50 mm shank gives comfortable engagement depth for manual fixtures and bench checks, while the solid construction resists wear under regular use. Supplied in a protective transport case, the item arrives ready for safe storage and reduces the risk of transit damage. This durability translates into a lower total cost of ownership because fewer replacements are required over the tool’s service life. Integrates into inspection workflows and documentation As a single‑element reference for end‑dimension inspection, this pin suits both manual verification and incorporation into gauging fixtures. The clear nominal 10.12 mm marking and robust geometry simplify fixture design and repeatable seating, while the compact form factor supports rapid swaps between stations. Traceability is supported by the SKU and GTIN, which assist inventory control and documentation in inspection protocols. Using a standardised pin streamlines audits and helps maintain consistent quality levels across shifts and sites. Contact Metav Werkzeuge today to discuss how the M323.A12 gauge pin fits into existing inspection processes and to request the item for comparison with current standards. Technical Data Article number: M323.A12 GTIN: 4061905064586 Label: Prüfstift, einzeln, 10,12 mm Länge 50 mm Category: Messstifte Facts Diameter: 10.12 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Supplied in a transport case Single pin for end‑dimension checks FAQ What level of accuracy can be expected from this inspection pin? The M323.A12 gauge pin is manufactured to a tolerance of ±0.002 mm, providing high repeatability for end‑dimension checks. Is the pin suitable for daily workshop use? Yes, the workshop‑grade special steel construction and supplied transport case make the pin appropriate for regular handling and storage in workshop environments. Can the pin be integrated into gauging fixtures? The compact geometry and clear nominal 10.12 mm dimension allow straightforward integration of the pin into dedicated fixtures and inspection jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.31 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
Benefit from the combination of ±0.002 mm repeatability, special steel construction and a compact 50 mm length for dependable end‑measurement tasks; order the gauge pin directly via Metav Werkzeuge or consult our experts if clarification is needed. Gauge pin M323.A31 — single 10.31 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.A31 is a single‑piece, workshop‑grade measuring pin designed for precise end‑measurements and locating tasks in small to medium assemblies. Workshop-grade design for daily use Diameter 10.31 mm for precise fitting 50 mm length for deeper locating tasks Accuracy ±0.002 mm for repeatable fits Reduce setup time with measurable precision This single gauge pin delivers industrial precision through a tight ±0.002 mm tolerance, which translates into consistent fits and fewer rejected parts during inspection or assembly. The compact element is machined to a 10.31 mm nominal diameter and a 50 mm shank length, meaning it is suitable for locating, checking bores and end‑measurements where small deviation matters. The accuracy level positions the part within fine workshop and inspection applications, reducing the need for repeated adjustments and shortening overall cycle times. Built for workshop handling and reliable endurance Manufactured from special steel, the pin combines toughness with dimensional stability; the material choice helps resist deformation under normal handling and repeated seating. The item is delivered as a workshop version, optimised for everyday use rather than purely laboratory conditions. At approximately 0.1 kg, the component is easy to handle and install in fixtures or test jigs. For safe transport, the pin arrives in a protective plastic or wooden case suitable for workshop logistics, ensuring the measuring surface remains intact until use. Integrates into inspection workflows with minimal training This measuring element fits naturally into existing gauge and fixture setups: its standard nominal diameter and straight shank allow immediate use with common locating systems. Traceability and inventory control are straightforward thanks to the clear article designation M323.A31 and the included GTIN, supporting orderly stock management and faster part identification on the shop floor. The compact dimensions and workshop orientation make the pin a practical choice for quality control stations that require reliable, repeatable contacts without extensive recalibration routines. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine gauge pin M323.A31 can streamline inspection tasks and to arrange delivery or technical clarification Technical Data Article number: M323.A31 GTIN: 4061905064678 Manufacturer: Metav IndustryLine Facts Diameter: 10.31 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop version for robust daily use Material: special steel Delivered in a protective plastic or wooden case for transport FAQ What tolerance can be expected from this gauge pin? The gauge pin M323.A31 is specified with an accuracy of ±0.002 mm, providing repeatable fits for precise locating and end‑measurement tasks. Is the pin suitable for fixture locating and bore checks? Yes, the 10.31 mm diameter and 50 mm length make this pin suitable for locating in fixtures and for bore checking where compact, accurate contacts are required. What material is used and how does that affect durability? The pin is made from special steel, which offers a balance of hardness and toughness for workshop durability and dimensional stability under routine use. Does the product include packaging for transport? The gauge pin is supplied in a protective plastic or wooden case intended for safe transport to the workshop or site. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.36 mm Diameter Workshop Version, Special Steel, Supplied in Case - Metav IndustryLine
Take advantage of high reproducibility, compact dimensions and workshop‑ready protection for dependable inline checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge Pin, single, 10.36 mm – 50 mm length (Metav IndustryLine) A gauge pin, single, 10.36 mm designed for precision end‑measure checks and alignment tasks in workshop metrology High accuracy ±0.002 mm Special steel, wear resistant Workshop version, robust finish Supplied in protective transport case Consistent accuracy for fit and go/no‑go checks The gauge pin is manufactured to an inspection tolerance of ±0.002 mm, making it suitable for fine acceptance tests and dimensional verification where repeatability is essential. With a nominal diameter of 10.36 mm and an overall length of 50 mm, the pin supports tight fit checks and assembly trials in jigs and fixtures. The stated tolerance refers to measured variation from the nominal diameter and helps engineers quantify clearances and interference fits during first‑article inspection or serial sampling. Built for workshop use and handling The workshop‑oriented construction provides a robust surface finish and handling comfort during repetitive use. Manufactured from special steel, the pin offers enhanced wear resistance for longer service life in production environments. At approximately 0.1 kg, the component is easy to position by hand or in a fixture without compromising stability. Delivery includes a protective transport case, which reduces the risk of damage in transit and keeps inspection tools organised between shifts. Practical integration into quality routines Designed for use as a reference element in dimensional control, this checking pin supports alignment, seating and end‑measure evaluations in small assemblies and tooling setups. The compact geometry and stable tolerance make it a practical choice for bench verification, gauge blocks pairing or feature‑control tasks. For traceability, the product is listed under GTIN 4061905065392, facilitating inventory management and documentation within inspection protocols. For tailored recommendations regarding integration into existing measurement procedures, Metav Werkzeuge can advise on compatible fixtures and complementary gauges. For workshop‑grade precision from Metav IndustryLine, order the M323.A36 gauge pin through Metav Werkzeuge or request application support via info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M323.A36 GTIN: 4061905065392 Weight: 0.1 kg Material: Special steel Core specifications Nominal diameter: 10.36 mm Length: 50 mm Accuracy/tolerance: ±0.002 mm Special features Workshop execution Supplied in transport case FAQ What tolerance does this gauge pin offer? The M323.A36 gauge pin by Metav IndustryLine is manufactured with a tolerance of ±0.002 mm to support high‑precision fit and inspection tasks. Which material is used for the pin? The pin is made from special steel, giving the Metav IndustryLine checking pin good wear resistance and durability for repeated workshop use. Is the pin supplied ready for use and protected during transport? Yes, the single gauge pin is supplied in a protective transport case suitable for workshop handling and safe storage during transit. What typical applications suit this checking pin? Typical uses include end‑measure checks, fixture alignment, seating verification and go/no‑go fit trials in small assemblies and jigs. How is the product identified for inventory and documentation? Identification is supported by the GTIN 4061905065392 and the article number M323.A36 for procurement and quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.37 mm Diameter Workshop Finish Plastic Case - Metav IndustryLine
Take advantage of the combination of industrial accuracy, robust workshop execution and transport protection for dependable end-measurements; order the gauge pin directly via Metav Werkzeuge or consult our specialists for integration into inspection workflows. Gauge pin, single — 10.37 mm Ø, 50 mm length | Metav IndustryLine A Gauge pin, single — 10.37 mm Ø, 50 mm length designed for precise end‑measurements and routine inspection tasks in workshop environments. High-precision tolerance ±0.002 mm Robust workshop execution for daily use Manufactured from special steel Supplied in a protective transport case Reliable end-measurements with industrial accuracy The Gauge pin M323.A37 provides a clear metrological advantage where repeatability matters. With a stated tolerance of ±0.002 mm, this test pin enables consistent end‑dimension checks that reduce uncertainty during final inspection and minimize rework. The combination of a defined diameter (10.37 mm) and a standard 50 mm length makes this component suitable for comparative measurements, go/no‑go verification and reference stacks on inspection benches. The tight tolerance directly supports faster decision cycles in quality control and contributes to more efficient production throughput. Built for workshop durability and secure handling Manufactured from special steel, the pin is produced to withstand regular handling without compromising dimensional stability. The item is delivered as a workshop version, meaning the design balances robustness with manageable weight (approx. 0.1 kg) so it is convenient to use on the shop floor. For transport and storage the pin is supplied in a protective transport case, reducing the risk of damage during handling and keeping inspection tooling organised. These practical features help maintain measurement integrity across shifts and operators. Practical compatibility for inspection and gauging tasks As a precision gauge element, this test pin integrates easily into existing inspection routines and fixture setups. The simple cylindrical geometry suits use as a reference dowel, locating pin or end‑measurement master in comparative layouts. Clear, repeatable contact geometry reduces operator variation and speeds up routine checks — a rational improvement that preserves product quality while saving time. The modest footprint and universal form factor make the item a pragmatic addition to any metrology kit or small batch inspection process. Reassurance through proven supply and expertise Metav’s approach to precision tools focuses on availability and trust: a broad product range and central distribution from Emmerich act as a quality filter for the European market. Choosing Metav IndustryLine components supports reliable supply chains and consistent product specifications; this credibility is reinforced by long‑standing customer relationships and an extensive catalogue of inspection equipment. For workshops and small series production the combination of clearly specified tolerances and dependable sourcing represents a sound investment in measurement certainty. Contact Metav Werkzeuge today for availability and technical advice to integrate this high‑precision gauge pin into inspection routines and secure consistent end‑measurements in production. Technical Data Article number: M323.A37 GTIN: 4061905065408 SKU: M323.A37 Category: Gauge pins / Messstifte Facts Diameter: 10.37 mm Length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: special steel Supplied in a protective transport case Intended use: end measurements / inspection FAQ What is the declared accuracy of this gauge pin? The declared accuracy for the gauge pin is ±0.002 mm, permitting highly repeatable end‑measurements for routine inspection. Is the pin suitable for daily workshop use? Yes, the workshop execution and special steel construction make the test pin fit for regular handling and inspection tasks on the shop floor. How is the item delivered and protected during transport? The gauge pin is supplied in a protective transport case to prevent damage and to simplify storage and handling. Can the pin be used as a locating dowel in fixtures? The cylindrical geometry and tight tolerance render the pin suitable as a locating dowel or reference master in many fixture and gauging applications. What is the product identifier for ordering? Order using SKU M323.A37 or refer to GTIN 4061905065408 when specifying this Metav IndustryLine gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.38 mm Diameter Workshop Version, Special Steel Case Included - Metav IndustryLine
Take advantage of precise dimensional control with a tight ±0.002 mm tolerance, a robust special steel construction and a compact 50 mm length for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin Ø10.38 mm, length 50 mm — Metav IndustryLine The Gauge pin Ø10.38 mm, length 50 mm is a workshop-grade inspection pin designed for fast, repeatable end‑dimension verification in production and quality control settings. Workshop version, robust construction Diameter Ø10.38 mm, length 50 mm Tolerance ±0.002 mm for precision Precision where repeatability counts A purpose-made gauge pin serves as a simple, dependable reference for checking bores, plug fits and end dimensions. With a nominal diameter of Ø10.38 mm and a declared dimensional accuracy of ±0.002 mm, this pin supports tight tolerances commonly required in precision engineering. The small form factor and controlled geometry reduce positional error during manual checks, so measured deviations directly reflect the component rather than the measuring aid. For production control this means fewer false rejects and more reliable pass/fail decisions. Built for workshop use and wear resistance Constructed from special steel, this inspection pin combines surface hardness with adequate toughness for repeated handling on the shop floor. At a 50 mm overall length and approximately 0.1 kg mass, the pin is easy to position and resists bending under normal use, which maintains dimensional integrity over time. The workshop specification signals a balance between durability and cost-efficiency: the component is ready for everyday inspection cycles without requiring special handling or complex fixtures. Practical integration into measurement routines Delivered as a single, clearly identified unit (SKU M323.A38), the pin is intended for quick checks in assembly, jig set‑up and incoming inspection of turned or drilled parts. Its compact geometry makes it suitable for tight access conditions and for use as a reference in comparative measurement setups. For users less familiar with gauge pins: these items act like precision dowels that confirm whether a bore or mating part meets a predetermined size; they do not replace dimensional gauges with digital readouts but provide a robust, low‑tech verification step that is fast and repeatable. For workshop metrology that demands consistent sub‑0.01 mm control, request the Metav IndustryLine M323.A38 gauge pin from Metav Werkzeuge to discuss application suitability and order details. Technical data Article number: M323.A38 GTIN: 4061905065415 Brand: Metav IndustryLine Product: Gauge pin Ø10.38 mm, length 50 mm Numbers / Core technical data Diameter: 10.38 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Delivery: Single piece FAQ What tolerance does this gauge pin provide? The gauge pin Ø10.38 mm (M323.A38) is specified with a dimensional tolerance of ±0.002 mm, suitable for precision end‑dimension checks. Which material is used for the pin? The M323.A38 gauge pin is manufactured from special steel, chosen for durability and wear resistance in workshop environments. What are the dimensions and weight of the pin? Nominal diameter 10.38 mm, length 50 mm, approximate weight 0.1 kg for the gauge pin M323.A38. Is the pin supplied individually or in a set? The item is supplied as a single inspection pin, described in the product label as an individual gauge pin. What is the primary application for this component? Common uses include end‑dimension verification, plug and bore checking and quick reference checks during assembly and incoming inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.4 mm Diameter Workshop Version, Special Steel Case Included - Metav IndustryLine
Take advantage of a workshop-grade design with a 10.4 mm diameter, 50 mm length and a tight ±0.002 mm tolerance for consistent end‑measure checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A40 — 10.4 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.A40 is a workshop‑grade cylindrical gauge intended for end‑measure verification and fit testing in routine inspection and assembly tasks. Workshop version construction Diameter 10.4 mm, length 50 mm High accuracy ±0.002 mm Delivered in protective transport case Reliable measurements that speed inspection cycles The cylindrical gauge provides a compact verification tool for repetitive end‑measure checks, reducing setup time during batch inspections. Owing to its ±0.002 mm tolerance, the pin supports high‑precision decisions in production control and quality assurance. Where comparative gauges or go/no‑go fittings are used, this component helps standardise checks so rejection rates fall and throughput improves. The solid construction minimises deformation under handling and contributes to consistent measurement results across shifts. Robust design for daily workshop use Built as a workshop version and manufactured from special steel, the pin withstands frequent handling and the occasional accidental contact typical of shop‑floor environments. The 50 mm overall length balances reach and rigidity, ensuring straight insertion and stable seating in bores and fittings. Supplied in a protective transport case, the unit is ready for storage or transit between inspection stations without additional packaging, reducing downtime and protecting the measurement surface from contamination. Easy integration into inspection routines and gauges The pin is suitable for quick fit testing, end‑measure verification and reference stacking in fixture checks. Its precise diameter of 10.4 mm makes it a reliable reference for assembly jigs, gauge blocks and fixture set‑ups where small clearance verification matters. The compact format requires minimal handling space and can be combined with common bench fixtures to create a repeatable inspection step that is both fast and auditable, supporting continuous production requirements. For a reliable supply of Metav IndustryLine gauge pins and to discuss fitment in existing inspection processes, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 — our team will advise on stock and delivery options. Technical data Article number: M323.A40 SKU: M323.A40 GTIN: 4061905065439 Material: Special steel Numbers / Core technical data Diameter: 10.4 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Weight: 0.1 kg Measuring range (max): 10.4 mm Design / Special features Workshop version execution Supplied in protective transport case ECLASS: 21170231 Label: Gauge pin, single, 10.4 mm, length 50 mm FAQ What tolerance does the gauge pin offer? The gauge pin M323.A40 is manufactured to an accuracy of ±0.002 mm, making it suitable for fine end‑measure verification and go/no‑go reference tasks. Is the pin delivered ready for transport and storage? Yes, the unit is supplied in a protective transport case to safeguard the measurement surface during storage and movement between workstations. Which material is used for the pin? The pin is made from special steel, chosen for its combination of wear resistance and dimensional stability in workshop environments. Can this pin be used in fixture set‑ups and assembly jigs? The 10.4 mm diameter and 50 mm length of the M323.A40 make it well suited for fixture alignment, end‑measure checks and quick fit testing within assembly and inspection processes. What product designation should be referenced when ordering? Please refer to the gauge pin M323.A40 (SKU M323.A40, GTIN 4061905065439) when enquiring or placing orders for this workshop‑grade gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.52 mm Diameter Workshop Version, Hardened Special Steel in Case - Metav IndustryLine
Take advantage of a compact, workshop-grade gauge pin that combines tight tolerance ±0.002 mm, a 10.52 mm diameter and a manageable 50 mm length for accurate end‑measurement tasks; delivered ready for safe transport in a protective case. Order the gauge pin directly via Metav Werkzeuge or consult the technical team for specification matching. Gauge pin, single — 10.52 mm diameter, 50 mm length (Workshop version) — Metav IndustryLine Gauge pin, single, 10.52 mm diameter and 50 mm length for precise bore and end‑dimension checks in machining and inspection workplaces. 10.52 mm diameter, 50 mm length Workshop‑grade special steel construction Tolerance ±0.002 mm for fine control Delivered in transport case Precise size control where repeatability matters A compact, single gauge pin with a diameter of 10.52 mm provides a straightforward reference for go/no‑go checks and end‑dimension verification. The stated tolerance of ±0.002 mm (±2 μm) places this item in the category of fine workshop gauges, enabling consistent dimensional checks during set‑up and quality assurance routines. For everyday metrology in production, this level of precision reduces rework and supports reliable assembly fits, turning a simple pin into a dependable measurement standard. Robust workshop design for reliable handling Built as a workshop version from special steel, the pin resists the mechanical wear typical of shop environments while remaining simple to handle. The 50 mm length balances reach and stiffness, helping to avoid bending during use and ensuring more reproducible contact with bore edges or end faces. The compact form factor supports quick insertion and removal, making it suitable for frequent checks on jigs, fixtures and finished components without disrupting workflow. Practical transport and identification for the workshop To protect tool life and maintain accuracy between uses, the gauge pin is delivered in a protective case suitable for transport. This arrangement reduces the risk of scratches or dents that can alter the effective diameter and compromise measurements. Clear marking and supplied identification make it easy to track the pin within tooling sets, simplifying inventory control and helping maintain measurement integrity across shifts. Straightforward applications and measurable benefits Designed for end‑measurement tasks, the pin is primarily intended for verifying bore sizes, seating fits and end faces in machining and inspection operations. Its single‑piece construction offers a direct mechanical reference without electronics, which is advantageous where immediate, low‑complexity checks are required. The combination of repeatable dimensional accuracy and a workshop‑hardened finish translates into fewer inspection deviations and a more predictable production output. Contact Metav Werkzeuge in Emmerich to confirm suitability for specific applications and to request delivery or availability details for this Metav IndustryLine gauge pin (M323.A52) Technical data Article number: M323.A52 GTIN: 4061905063473 Manufacturer: Metav IndustryLine Measurements Diameter: 10.52 mm Length: 50 mm Weight: 0.1 kg Tolerance / accuracy: ±0.002 mm Features Single gauge pin design Material: Special steel Workshop version Delivered in a plastic or wooden case for transport Intended use: end measurements FAQ What level of accuracy can be expected from this gauge pin? The gauge pin offers an accuracy of ±0.002 mm, making it suitable for fine workshop checks where deviations must be kept within a few micrometres. Is the gauge pin suitable for checking internal bores? Yes, the single‑piece, 10.52 mm diameter pin is intended for verifying internal bores, seating fits and end faces in machining and inspection tasks. What material is the pin made from and how does that affect durability? The pin is manufactured from special steel, chosen for robust wear resistance in workshop conditions while maintaining dimensional stability. Is the pin supplied ready for safe transport and storage? The item is supplied in a protective plastic or wooden case for transport, which minimises the risk of damage that could affect measurement accuracy. Does the product include an article or SKU for ordering reference? The ordering reference for this Metav IndustryLine gauge pin is M323.A52, and the GTIN is 4061905063473. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 10.59 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precision and workshop-grade durability: the 10.59 mm gauge pin with a tight ±0.002 mm tolerance and a stable 50 mm shank ensures reproducible end-dimension checks and secure fixture engagement. Order the gauge pin directly via Metav Werkzeuge or consult our specialists for specification matching. Gauge pin, single — 10.59 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin, single 10.59 mm / 50 mm length is designed for quick end-dimension verification and fixture alignment in workshop metrology and inspection tasks Workshop version for durable use Diameter 10.59 mm with ±0.002 mm tolerance 50 mm shank length for stable engagement Made from special steel for wear resistance Reliable reference for end-dimension verification A precision gauge pin is the simplest route to repeatable end-size checks. With a nominal diameter of 10.59 mm and a verified tolerance of ±0.002 mm, this test pin functions as a fixed, traceable reference for bore checks, pin fits and alignment operations. The tight tolerance reduces measurement uncertainty compared with loose-fitting checks, supporting consistent pass/fail decisions on the shop floor and lowering the risk of scrapping otherwise acceptable parts. Robust design that keeps inspections predictable Built as a workshop version, the pin combines a compact geometry with a 50 mm shank that gives reliable engagement in gauges, fixtures or manual checks. Constructed from special steel, the component is abrasion-resistant and maintains form under repeated use, which extends service life and reduces the frequency of replacements. The modest mass supports easy handling while ensuring the pin seats positively in the mating feature, improving reproducibility for routine inspection tasks. Integrating the pin into everyday quality workflows As a single test pin, the component lends itself to rapid Go/No‑Go procedures, reference stacks and setup control. Using the pin as part of a standardised inspection routine shortens cycle times and improves throughput, a rational advantage for production and maintenance teams aiming to keep lines moving. The product’s category as a precision test pin (Messstifte) and the clear article identifiers simplify stock management and traceability in quality documentation. For workshop-grade tolerance and dependable wear resistance choose the Metav IndustryLine gauge pin; contact Metav Werkzeuge in Emmerich for supply and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.A59 GTIN: 4061905064302 Category: Messstifte Facts Diameter: 10.59 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop version Single gauge pin Story trigger: end-dimension checks FAQ What accuracy can be expected from this gauge pin? The gauge pin M323.A59 (Metav IndustryLine) is manufactured to a tolerance of ±0.002 mm, providing a high-precision reference for end-dimension checks. Is the pin suitable for repeated use in a production environment? Yes, the workshop‑grade construction and special steel composition ensure good wear resistance for repeated use in inspection and fixture applications. Can the gauge pin be used for bore checks and pin fits? The 10.59 mm diameter and 50 mm shank length make this test pin suitable for bore verification, fit checks and alignment tasks as a stable reference. How is the product identified for stock and traceability? The item is supplied as M323.A59 with GTIN 4061905064302 and is listed under the Messstifte category for easy inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 13.48 mm Length Workshop Finish - Metav IndustryLine
Take advantage of a precise and compact measuring reference that delivers a consistent 13.48 mm diameter with a fine ±0.002 mm tolerance and a stable 50 mm length — ideal for repeatable end‑measure checks and quick go/no‑go verification. Order the pin directly via Metav Werkzeuge or contact our consultants for application guidance. Gauge pin M323.D48 — precision test pin, 13.48 mm Ø, 50 mm length (Metav IndustryLine) A Gauge pin M323.D48 serves as a hardened reference diameter for inspection and assembly tasks, supplying a fixed 13.48 mm datum for bore checks, end‑measure verification and fixture set‑up in workshop and production environments. Precision Ø 13.48 mm Tolerance ±0.002 mm 50 mm length, stable handling Made from special steel Consistent dimensional reference for reliable inspection The compact design provides a stable reference that helps to speed up routine checks and reduces measurement uncertainty. With a declared tolerance of ±0.002 mm, the pin functions as a high‑precision reference for comparative and go/no‑go tests, ensuring that bores and seats are validated against a fixed diameter rather than a subjective feel. This consistent datum reduces rework, supports traceable quality routines and integrates smoothly into existing inspection sequences. Durable workshop construction for repeat use Built as a workshop‑grade component, the pin is manufactured from special steel and finished for sustained contact performance over repeated use. The 50 mm length gives sufficient engagement for many bores while maintaining ease of handling and low mass for rapid manual checks. The robust construction reduces the risk of wear‑induced drift and makes the item suitable for daily inspection tasks in production and maintenance environments. Practical integration into quality control workflows As a fixed‑size gauge, the item simplifies set‑up of jigs and fixtures and serves as a quick verification tool during assembly and final inspection. The clear physical reference of 13.48 mm accelerates decision‑making in the workshop: accept, reject or rework. Supplied with the clear product identifier M323.D48, the pin is straightforward to document in inspection logs and to include in traceability records for component runs and batch verification. For a reliable inspection reference, order the M323.D48 from Metav Werkzeuge or consult our specialists at Metav Werkzeuge for advice on integrating the gauge pin into existing measurement routines Technical data SKU: M323.D48 GTIN: 4061905066047 Category: Gauge pins Core dimensions & accuracy Diameter: 13.48 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Materials & special features Material: Special steel Design: Workshop version Typical application: End‑measure checks and bore verification FAQ What is the exact diameter of the gauge pin? The M323.D48 gauge pin has a diameter of 13.48 mm as its fixed reference. What accuracy can be expected from this pin? The pin is specified with a tolerance of ±0.002 mm, suitable for precise workshop inspection tasks. Which materials is the pin intended for checking? The M323.D48 is a dimensional reference used for verifying component bores and end measurements rather than being material‑specific; it is used across metal and mixed‑material assemblies for dimensional checks. Is the gauge pin suitable for fixture set‑up and jig alignment? Yes, the fixed diameter and stable 50 mm length make the pin appropriate for fixture set‑up, alignment and quick go/no‑go verifications in production. How is the product identified for documentation and traceability? The item is supplied as SKU M323.D48 with GTIN 4061905066047, allowing straightforward documentation in inspection records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 14.49 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precision and robust workshop construction for repeatable end‑measure checks: a compact gauge pin with a controlled diameter and an industrial tolerance of ±0.002 mm ensures dependable seating and consistent inspection results. Order the required items directly via Metav Werkzeuge or consult the product experts if additional specifications are needed. Gauge pin, single 14.49 mm (50 mm length) — workshop‑grade, ±0.002 mm (Metav IndustryLine) Gauge pin, single 14.49 mm (50 mm length) is a compact, workshop version gauge pin designed for end‑of‑range measurements and precise seating checks in production and inspection environments. Workshop‑grade special steel Diameter 14.49 mm, tolerance ±0.002 mm 50 mm solid length for stable seating Single gauge pin for end‑measure verification Reduce measurement uncertainty with tight tolerances The compact design delivers a controlled diameter of 14.49 mm combined with a verified tolerance of ±0.002 mm, translating into measurable reductions in process variation and rework. This degree of precision is especially valuable where repeatable seating or plug checks determine pass/fail decisions. Using a single, solid pin with a 50 mm engagement length improves positional stability compared with short shank gauges, so inspection results remain consistent even under workshop conditions. Built for workshop handling and repeated use Constructed from special steel in a workshop‑grade finish, the pin resists deformation and maintains dimensional integrity across frequent handling. The robust material and solid construction ensure reliable contact with mating bores and fixtures, extending the pin’s service life and reducing the frequency of replacements. Where process uptime matters, a durable gauge pin translates into fewer interruptions and steady inspection throughput. Integrates simply into quality routines and fixtures The single gauge pin is straightforward to incorporate into standard inspection jigs, bench fixtures and end‑of‑line checks. Its standardised diameter and length facilitate fixture design and reduce the need for bespoke adapters. For batch verification or intermittent spot checks, the pin provides a fast, repeatable reference that complements calipers, micrometres and plug gages in a coherent measurement chain. Clear specifications support traceability and documentation Dimensionally defined components with documented tolerances support traceable quality records and simpler acceptance criteria. The compact format and unambiguous specification help to standardise inspection procedures across workshops, making results easier to compare over time. Where traceability and reproducibility are priorities, the controlled geometry and declared tolerance provide a firm technical basis for decision‑making. For supply and technical advice on Metav IndustryLine workshop gauge pins, contact Metav Werkzeuge in Emmerich to secure the correct items for inspection routines and fixture integration Technical Data Article number: M323.E49 GTIN: 4061905067693 SKU: M323.E49 Facts Diameter: 14.49 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Version: workshop execution Category: gauge pins FAQ What is the intended use of this gauge pin? The gauge pin is intended for end‑of‑range measurements and seating checks in production and inspection setups; the Metav IndustryLine gauge pin M323.E49 provides a stable reference for plug and bore verification. How precise is the gauge pin and what does the tolerance mean? The declared ±0.002 mm tolerance indicates the maximum permissible deviation from the nominal 14.49 mm diameter, ensuring tight dimensional control for repeatable inspection results. Can this pin be used in fixtures and jigs? Yes — the solid 50 mm length and workshop‑grade steel construction make the pin suitable for integration into bench fixtures and standard inspection jigs. Is the material suitable for regular workshop environments? The pin is made from special steel in a workshop execution, providing robustness against routine handling and reliable dimensional stability during typical inspection cycles. How is the component identified for procurement and traceability? Use GTIN 4061905067693 or SKU M323.E49 for ordering and traceability within quality records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 18.78 mm Diameter, Workshop Version, Special Steel in Case - Metav IndustryLine
Take advantage of repeatable end‑measurement with a nominal diameter of 18.78 mm, a usable length of 50 mm and a tight ±0.002 mm tolerance for consistent inspection results; the workshop‑specification construction and delivery in a transport case ensure fast handling and secure storage. Order the gauge pin directly via Metav Werkzeuge or ask the consultants for application advice. Gauge pin M323.I78 — 18.78 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.I78 is a single precision test pin designed for end‑measurement and fit inspections in workshop and production metrology, particularly for quick go/no‑go checks and dimensional verification of machined components Workshop specification 18.78 mm nominal diameter Tolerance ±0.002 mm Delivered in transport case Precision for repeatable end measurements The pin provides a measurable improvement in process reliability because the nominal 18.78 mm diameter and the specified ±0.002 mm tolerance translate directly into tighter acceptance criteria during incoming inspection or in‑process checks. Manufactured from special steel, the geometry and surface finish reduce seating errors and measurement scatter; this results in fewer false rejects and a clearer statistical basis for quality decisions. For end‑measurement tasks and fit checks, the combination of 50 mm usable length and compact mass supports steady hand positioning while remaining compatible with common jigs and fixture designs. The clearly defined tolerance allows engineers to integrate the pin into control plans and SPC routines with confidence in repeatability. Built for workshop handling and longevity The workshop execution emphasises practical durability: the selected special steel balances hardness and resistance to surface damage, while a careful finish preserves the effective diameter over repeated use. Supplied in a protective transport case, the test pin is ready for secure storage and damage‑free transport between inspection benches or job sites. Robust construction minimises maintenance intervals and reduces the need for frequent replacement, supporting lean inventory practices and uninterrupted production cycles. The modest mass and compact form provide ease of handling during high‑throughput checks, helping to maintain steady cycle times without compromising accuracy. Integrating the pin into inspection workflows As a compact dimensional standard, the pin suits simple plug‑gauge routines, bench checks and reference stack assemblies. It functions well for verifying bores, locating features and checking mating fits in assemblies; the repeatability of the geometry simplifies acceptance criteria in work instructions. When included as a reference artefact in a fixture, the pin supports reproducible positioning and faster changeover, translating precision into operational efficiency. For users seeking traceable calibration or specific reporting, Metav IndustryLine can advise on calibration pathways and documentation to match internal quality systems and audit requirements. Choose the Metav IndustryLine M323.I78 for workshop end‑measurement reliability and contact Metav Werkzeuge for specification advice and prompt supply from Emmerich. Technical data SKU: M323.I78 GTIN: 4061905449468 Designation: Gauge pin, single, 18.78 mm diameter, 50 mm length Manufacturer: Metav IndustryLine Core dimensions Nominal diameter: 18.78 mm Usable length: 50 mm Tolerance / accuracy: ±0.002 mm Weight: 0.15 kg Materials & features Material: special steel Workshop specification Delivered in transport case Application: end‑measurement, fit checks, dimensional verification FAQ What is the primary use of this gauge pin? The gauge pin is intended for end‑measurement and fit inspections, serving as a reference for bore checks, locating features and quick go/no‑go verifications in workshop and production environments. What tolerance and repeatability can be expected? The pin is manufactured to a ±0.002 mm tolerance, providing the level of repeatability required for precise dimensional checks and stable statistical process control. Which materials and components can be checked with this pin? Designed for dimensional verification of machined parts, the pin is suitable for use with metal and precision‑machined components where accurate bore or fit assessment is required. How is the pin delivered and stored? The product is supplied in a protective transport case to prevent handling damage and to allow secure storage between inspection tasks. Can the pin be integrated into a fixture or jig? Yes, the pin’s geometry and compact length make it suitable for integration into fixtures and jigs for repeatable locating and verification tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Pin 18.81 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
The combination of workshop-ready robustness, ±0.002 mm dimensional accuracy and a compact 50 mm length makes this gauge pin a reliable tool for repeatable end-dimension checks and fixture setting; order the test pin directly via Metav Werkzeuge or ask our consultants if needed M323.I81 test pin — 18.81 mm diameter, 50 mm length (Metav IndustryLine) The M323.I81 is a single test pin designed for precise end-dimension verification and gauging tasks in workshop environments Workshop version for robust daily use Diameter 18.81 mm with ±0.002 mm tolerance Length 50 mm for compact fixture fitting Delivered in a protective transport case Precision that reduces rework and inspection time High repeatability is the primary operational benefit of this gauge pin. With a specified runout tolerance of ±0.002 mm, the pin gives a clear, measurable reference for end-dimension checks and go/no-go fixturing; this level of accuracy supports reliable pass/fail decisions and reduces the need for secondary measurements. The nominal diameter 18.81 mm is machined to tight form and size control, which helps maintain consistent alignment in jigs and assemblies. For production environments where throughput and conformity are measured, the technical accuracy directly translates into fewer rejected components and lower overall inspection time. Workshop design for everyday handling and durability Engineered as a workshop version, the pin combines a short 50 mm overall length with a solid profile that resists bending during routine handling. The body is made from special steel, selected for wear resistance and dimensional stability under repeated insertion and withdrawal cycles. At approximately 0.15 kg, the component is easy to position by hand yet substantial enough to remain steady in fixtures. Delivery in a protective transport case preserves the ground surfaces during storage and transit, ensuring the reference diameter stays within tolerance until first use. The compact format supports quick integration into bench-top gauges, fixture checks and assembly stations. Procurement confidence and application support As part of the Metav IndustryLine range, this gauge pin benefits from a European distribution and quality control approach that emphasises availability and traceability. Stock is managed from Emmerich with a quality filter for incoming goods, which supports predictable replenishment for production lines. The clear specification and workshop-orientated design simplify specification in engineering documents and bills of materials; traceability is supported by SKU and GTIN identifiers listed in the technical data. Where bespoke advice on application or integration is required, Metav’s consultative services provide pragmatic support to match the pin to inspection routines and fixture geometry. Choose Metav IndustryLine quality for reliable gauging — contact Metav Werkzeuge for stock availability and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.I81 GTIN: 4061905449888 Manufacturer: Metav IndustryLine Facts Diameter: 18.81 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop execution Delivered in protective transport case FAQ What level of accuracy does the M323.I81 test pin provide? The M323.I81 test pin from Metav IndustryLine is specified to ±0.002 mm, suitable for high-repeatability end-dimension checks and fixture setting. How is the pin delivered to protect its measuring surfaces? Delivery is in a protective transport case to preserve the ground diameter and surface finish during storage and transit. For which applications is this gauge pin intended? This gauge pin is intended for end-dimension verification, go/no-go gauging and fixture alignment in workshop and production environments. Is the M323.I81 suitable for integration in inspection jigs? Yes; the compact 50 mm length and stiff profile are designed for easy integration into bench fixtures and gauging jigs. Where can traceability information such as SKU and GTIN be found? Traceability identifiers including SKU and GTIN are supplied in the technical data section for the M323.I81 test pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Limit Plug Gauge H7 Hardened Gauge Steel DIN 2245 - Metav IndustryLine
Take advantage of the combination of DIN 2245 conformity, H7 tolerance and hardened gauge steel for fast, reproducible hole checks. The compact 50.0 mm nominal diameter reduces inspection time and supports reliable interchangeability on the shop floor. Order the limit plug gauge directly via Metav Werkzeuge or contact our consultants for application advice. Limit plug gauge M314.050 — 50.0 mm H7, DIN 2245 (Metav IndustryLine) A limit plug gauge M314.050 for rapid verification of hole diameters to DIN 2245 with H7 tolerance, intended for workshop and production inspection DIN 2245 compliant H7 tolerance Hardened gauge steel construction Precise 50.0 mm nominal diameter Robust workshop inspection tool Faster conformity checks for production flow The device is designed for direct verification of bore diameters and provides a clear pass/no‑pass decision, helping to cut inspection time without compromising traceability. Built to the DIN 2245 specification and finished to an H7 fit class, the gauge gives a rapid indication of whether a hole meets the required tolerance, which supports stable assembly processes and reduces downstream rework. High precision in a compact format accelerates routine checks and keeps throughput steady. Durable construction that preserves accuracy Manufactured from hardened gauge steel, the gauge resists wear during repeated shop‑floor use and maintains dimensional integrity under frequent handling. The material choice translates to long service life and consistent repeatability, so measurements remain dependable over many cycles. Its straightforward geometry and solid construction make it suitable for regular inspection routines where robustness and predictable behaviour matter most. Traceable specification and procurement clarity The tool is supplied with clear identification for ordering and inventory management, simplifying procurement and batch control. As part of the Metav IndustryLine, the gauge benefits from a quality filter aimed at making precision tools accessible to workshops and production facilities across Europe. The combination of standard conformity, durable material and concise identification supports reliable stock management and quality assurance. For conformity testing in serial production, specify the Metav IndustryLine limit plug gauge M314.050 and contact Metav Werkzeuge for procurement or technical clarification: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M314.050 GTIN: 4054469121741 ECLASS: 21170218 Customs tariff number: 90173000 Norm: DIN 2245 Facts Nominal diameter: 50.0 mm Tolerance: H7 Special features Material: gauge steel, hardened Compliance: DIN 2245 Condition: good Category: Messstifte / Lehren SKU: M314.050 FAQ What nominal diameter and tolerance does the gauge check? The gauge checks a nominal diameter of 50.0 mm with an H7 tolerance in accordance with DIN 2245; this is specified for the M314.050 limit plug gauge. What material is used for the gauge? The M314.050 is made from hardened gauge steel, chosen for wear resistance and dimensional stability during repeated inspections. Is the gauge suitable for routine shop‑floor inspection? Yes. The combination of DIN 2245 conformity and hardened construction makes the limit plug gauge well suited to frequent pass/no‑pass checks on the workshop floor. How is the product identified for ordering and stock control? Identification is provided by the article number M314.050 and the GTIN 4054469121741 for unambiguous procurement and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Test Pin 10.17 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
Take advantage of precise tolerances, compact dimensions and a workshop-ready design to ensure repeatable small-bore checks with minimal setup. The combination of high repeatability and robust construction supports reliable inspection routines—order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.A17 — 10.17 mm diameter, 50 mm length (Metav IndustryLine) The gauge pin M323.A17 is a single precision plug intended for end-measurements and plug gauges in workshop inspection, suited to fine mechanical and small-part applications. Precision tolerance ±0.002 mm Diameter 10.17 mm for fine fits 50 mm overall length for stable handling Workshop-grade special steel construction Precise dimensions that reduce rework and inspection time This gauge pin delivers a defined fit with a diameter of 10.17 mm and a verified tolerance of ±0.002 mm, providing a measurable standard for go/no-go checks and clearance verification. The tight tolerance reduces ambiguity during quality control and speeds up decision-making in repetitive inspection tasks. As a compact inspection element it supports faster fixture set-up and lowers the risk of dimensional scrap when used as a reference for small bores and plugs. Built for regular shop-floor use with durable material choice Manufactured from special steel in a workshop configuration, the pin balances stiffness and wear resistance for frequent handling and insertion cycles. The 50 mm length gives sufficient contact surface to stabilise the plug in the bore while remaining compact for cramped fixtures. This construction helps maintain reproducible contact geometry over many cycles, enhancing the lifespan of the inspection tool and reducing the need for frequent replacements. Micro-range suitability and practical application guidance Classified in the micro range (measurement span 10–100 mm), the pin is ideal for micromechanics, instrument making and any application requiring precise small-bore checks. The product is supplied and documented for traceable identification, supporting structured inspection plans and part release procedures. For customers seeking consistent small-part measurement, the specification of this gauge pin provides a clear basis to integrate the component into existing go/no-go and plug-gauge workflows with minimal adaptation. For dependable small-bore inspection, request the Metav IndustryLine gauge pin M323.A17 via Metav Werkzeuge or consult our specialists at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.A17 GTIN: 4061905062315 Label: Gauge pin, single, 10.17 mm length 50 mm Brand: Metav IndustryLine Facts Diameter: 10.17 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Measurement range (max): 10.17 mm Special features Material: Special steel Workshop execution Measurement class: Micro (10–100 mm) Accuracy specification: ±0.002 mm FAQ What applications suit this gauge pin? The gauge pin M323.A17 is suitable for small-bore inspections, plug-fit checks and fine mechanical assemblies where a 10.17 mm reference is required. Is the diameter specification guaranteed for production use? Yes, the diameter 10.17 mm and the stated tolerance of ±0.002 mm define the production-grade specification for the Metav IndustryLine gauge pin M323.A17. Can this pin be used in fixture checks and go/no-go assemblies? The pin’s compact 50 mm length and tight tolerance make it appropriate for fixture-based inspections and go/no-go verification in workshop and light production environments. How is traceability handled for the product? Identification data such as article number M323.A17 and GTIN 4061905062315 allow integration into inspection documentation and traceability records for quality processes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Test Pin 10.39 mm Diameter Workshop Version, Special Steel Case - Metav IndustryLine
Take advantage of a workshop-ready inspection pin that combines 10.39 mm nominal diameter, ±0.002 mm tolerance and a compact 50 mm length for consistent end-measure reference. Order this precision gauge pin directly via Metav Werkzeuge or consult our technical team for application advice. Gauge pin M323.A39 (10.39 mm Ø, 50 mm length) — Metav IndustryLine Gauge pin M323.A39 is a single-piece precision inspection pin intended for dimensional control and end-measure checks in workshop and quality-inspection environments. 10.39 mm diameter, tolerance ±0.002 mm 50 mm length, special steel construction Workshop version for routine inspection tasks Consistent reference measurements for shop-floor control The compact inspection pin offers a clear, measurable reference for end-face and hole checks where repeatability matters. With a 10.39 mm nominal diameter held to ±0.002 mm, the pin provides a reliable datum for pass/fail assessments and comparative gauges. The specified tolerance reflects industrial-grade performance suitable for maintenance, assembly and incoming inspection processes where tight fit and location checks are routine. Durable construction for everyday workshop use Manufactured from special steel, the 50 mm body balances rigidity and feel for quick handling during repetitive checks. The workshop version is designed to tolerate frequent use without compromising the measuring surface; the short length improves stiffness and reduces bending under normal manual application. The compact mass facilitates swift placement and removal, making it a practical choice for production benches and inspection stations. Simple integration into existing inspection routines Supplied as a single test pin, this item is suitable for use as an individual reference gauge or as a replacement element in a set of inspection pins. Traceability is supported by the visible identifiers: SKU M323.A39 and GTIN 4061905065422, which ease stock management and calibration records. The pin’s straightforward geometry makes it compatible with common gauge holders and fixtures used in workshop metrology. Reliable partner for precision requirements As part of the Metav IndustryLine range, the pin benefits from a distribution and quality filter based in Emmerich that focuses on consistent supply and technical availability for industry and trade. This connection supports reliable replenishment and documentation, helping to maintain inspection continuity across production cycles. Specify the Metav IndustryLine gauge pin for robust, repeatable end-measure checks — contact Metav Werkzeuge for delivery details and technical guidance at info@metav-werkzeuge.com or by phone Technical data SKU: M323.A39 GTIN: 4061905065422 Brand: Metav IndustryLine Label: Test pin, single, 10.39 mm diameter, 50 mm length Facts Diameter: 10.39 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Single-piece inspection pin Intended for end-measure reference checks FAQ What is the nominal diameter and tolerance of the pin? The pin has a nominal diameter of 10.39 mm with a declared tolerance of ±0.002 mm for precise reference measurements. Is this item supplied as a single piece or in a set? This is supplied as a single-piece inspection pin (SKU M323.A39) suitable for individual replacement or use as a standalone reference. Which material is used for the gauge pin? The pin is made from special steel, chosen for stability and wear resistance in workshop inspection tasks. Can this pin be used for end-face and hole checking? Yes, the geometry and stiffness of the 50 mm length make it appropriate for end-measure references and comparable hole assessments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Test Pin 12.06 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability, compact dimensions and robust workshop construction for reliable end‑measurement tasks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.C06 – 12.06 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin M323.C06 is a single, cylindrical inspection pin designed for precise end‑measurements and checking diameters in workshop environments. Workshop version for industrial use Diameter 12.06 mm with high tolerance Length 50 mm for compact checking Special steel construction for durability Precision that reduces rework and speeds inspection The M323.C06 is manufactured to a tight tolerance of ±0.002 mm, making it suitable for tasks where reproducibility matters. As a hardened inspection pin with a nominal 12.06 mm diameter, it delivers consistent contact geometry for rapid pass/fail assessments and comparative measurements. The compact 50 mm length keeps the pin rigid during probing and limits deflection, which contributes directly to measurement reliability and fewer repeat operations on production parts. Built for the workshop: robust materials and practical handling This workshop‑grade inspection pin is produced from special steel, chosen for dimensional stability under repeated use. The workshop version designation indicates components and finishing targeted at regular shopfloor handling rather than delicate laboratory use. Supplied in a protective transport case, the pin remains protected during storage and transit, preserving the calibration state and surface condition so that the tool stays ready for immediate use on the line. Practical benefits for quality control workflows Using a fixed‑diameter inspection pin simplifies go/no‑go checks, alignment tasks and end‑measurement controls. The straightforward geometry reduces operator interpretation: a controlled contact surface and known tolerance allow integration into bench checks or fixture verifications with minimal setup time. The item is referenced as M323.C06 for easy traceability when documenting inspection steps or ordering replacements, helping maintain an efficient quality routine. For reliable end‑measurement with Metav IndustryLine quality, contact Metav Werkzeuge GmbH in Emmerich for tailored advice and secure supply Technical data Article number: M323.C06 GTIN: 4061905065521 Label: Prüfstift, einzeln, 12,06 mm Länge 50 mm Facts Diameter: 12.06 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Delivery: Protective transport case SKU: M323.C06 FAQ What tolerance does this inspection pin offer? The inspection pin is manufactured with a tolerance of ±0.002 mm, ensuring consistent contact for comparison and verification tasks with the M323.C06. Is the material suitable for regular workshop use? Yes, the M323.C06 is made from special steel in a workshop version finish, offering durability for frequent handling and routine inspection tasks. How is the gauge pin delivered for safe storage? The item is supplied in a protective transport case to maintain surface condition and dimensional integrity during storage and transport. Can this pin be used for quick go/no‑go checks? The fixed diameter and tight tolerance make the pin well suited for pass/fail checks, alignment verifications and comparative measurements in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Test Pin 18.23 mm Diameter Workshop Version, Special Steel - Metav IndustryLine
High-precision inspections are supported by the combination of ±0.002 mm accuracy, special steel construction and a compact 50 mm shank for stable handling; order the part directly via Metav Werkzeuge or consult their specialists for application advice. Gauge pin, single, 18.23 mm — precision inspection pin (Metav IndustryLine) The Gauge pin, single, 18.23 mm, 50 mm provides a compact, workshop-grade solution for verifying bore diameters and end measurements in routine quality checks and fixture set-ups. Workshop version for robust use Diameter 18.23 mm for precise fits Tolerance ±0.002 mm for repeatable checks Supplied in a transport case Consistent dimensional control with measurable accuracy This inspection pin delivers a defined measurement datum through its 18.23 mm diameter and calibrated manufacturing tolerance of ±0.002 mm, enabling reliable pass/fail assessment in production routines. The tight tolerance reduces uncertainty in repeat measurements and shortens decision cycles on the shop floor, turning raw measurement data into quick, actionable conclusions. The compact 50 mm length maintains rigidity for short-span bore verification while keeping handling straightforward during frequent checks. Durable design for workshop environments Manufactured from special steel, the pin is specified for workshop use and intended to withstand repeated insertion and extraction cycles without rapid wear. The workshop version designation indicates enhanced surface robustness and dimensional stability under typical handling stresses. Supplied in a transport case, the component is protected during storage and transit, lowering the risk of accidental damage and preserving the calibrated geometry for longer service life. Practical application and measurement workflow benefits As a single gauge pin, this tool is optimised for quick in-process checks of holes, locating bores and end stops where a fixed reference is required. The short shank length reduces bending effect and simplifies alignment in fixtures, while the pronounced diameter gives a clear go/no-go condition for mating parts. Use of this pin in combination with micrometres or bore gauges supports traceable dimensional control and helps document conformity within production batches. Reliability through a trusted supply chain Sourcing the pin from Metav IndustryLine ensures logistical continuity and a quality filter at the European distribution hub in Emmerich. Metav’s broad product range and long-standing customer base reflect a pragmatic approach to precision tools: consistent availability, clear product data and streamlined delivery are positioned to support workshop throughput and minimise supplier overhead. This reliability complements the technical merits of the pin itself and supports long-term process stability. Choose this Metav IndustryLine precision gauge pin for reliable, repeatable bore verification — contact Metav Werkzeuge for ordering or application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M323.I23 GTIN: 4061905449840 Brand: Metav IndustryLine Category: Messstifte Facts Diameter: 18.23 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: special steel Workshop version (robust specification) Supplied in transport case Single gauge pin for bore and end measurements FAQ What measurement tolerance can be expected with this pin? The pin is manufactured to a tolerance of ±0.002 mm, which supports tight repeatability for workshop inspection tasks. Is the pin suitable for checking bore diameters and end measurements? Yes, the gauge pin is designed for quick verification of bore diameters and end measurements; its 18.23 mm diameter and 50 mm length provide a stable reference for such checks. What material is used for the pin and how does it affect durability? The pin is made from special steel, giving enhanced surface robustness and dimensional stability appropriate for workshop conditions. Does the product arrive protected for transport and storage? The pin is supplied in a transport case to reduce the risk of damage during transit and to preserve the measurement geometry. How is the product identified for ordering or inventory? The item is listed under SKU M323.I23 and GTIN 4061905449840 for procurement and stock management. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Precision Feeler Gauge 0.02mm Thickness 12.7mm Width Supplied in Case - Metav IndustryLine
Take advantage of a precisely manufactured measuring strip with a 0.02 mm blade thickness, a 5 m continuous length and a 12.7 mm working width for consistent gap setting and repeatable inspection results; order the item directly via Metav Werkzeuge or consult the technical advisers for application support. Precision Feeler Strip M318.602 — 0.02 mm thickness, 5 m continuous length (Metav IndustryLine) The Precision Feeler Strip M318.602 is a long, narrow gauge designed for accurate clearance measurement, valve and tool setting, and extended gap inspection in production and maintenance environments. *0.02 mm thickness for fine clearance checks *5 m continuous length for extended measurements *12.7 mm width for easy handling and access Precise dimensions for repeatable clearance control The long-format gauge delivers measurable benefit where short blades fall short: with a 0.02 mm nominal thickness and a 5 m continuous length the strip enables consistent checks along extended runs and multiple reference points without repeated blade changes. The narrow 12.7 mm width helps access confined spaces while preserving stiffness, which supports reproducible readings and reduces setup time in adjustment tasks. Such attributes translate directly into fewer production interruptions and lower rework rates. Designed for reliable handling and quick measurement workflows Specified with a nominal accuracy of ±0.05 mm, the strip combines fine resolution with practical robustness for workshop use. Weighing only 0.046 kg, the material is easy to manoeuvre and position while still providing a stable feel under contact. A continuous gauge like this accelerates routine operations by removing the need to combine multiple short blades, thereby shortening machine setup cycles and improving throughput in repetitive assembly or maintenance tasks. Protected transport and broad usability across shop environments Delivery includes a protective transport case to keep the strip flat and clean during storage and transit, ensuring the profile remains true to specification. The format is suitable for precision engineering, toolroom maintenance, valve setting, die clearance checks and other applications where a single, long-reference element simplifies measurement procedures. The entry-level form factor supports straightforward integration into existing inspection routines while offering piece-of-mind through consistent geometry. Contact Metav Werkzeuge for tailored application advice and to arrange purchase of the Metav IndustryLine Precision Feeler Strip M318.602; email info@metav-werkzeuge.com or call +49 2822 7131930 for assistance Technical Data Article number: M318.602 GTIN: 4054469129440 Manufacturer: Metav IndustryLine Tariff code: 90173000 Numbers / Core technical data Length: 5,000 mm Width: 12.7 mm Thickness: 0.02 mm Nominal accuracy: 0.05 mm Weight: 0.046 kg ECLASS: 21170212 Special features / Versions Continuous feeler strip for extended measurements Delivered in a protective transport case (plastic or wooden) Category: gauges / feeler strips FAQ What thickness is the strip and how does it help fine adjustment? The strip has a thickness of 0.02 mm, a dimension that allows the M318.602 to be used for fine clearance checks and precise valve or tool setting where small, controlled gaps are critical. Is the strip supplied ready for use and how is it protected during transport? The M318.602 is delivered with a protective transport case to keep the strip flat and clean during shipment and storage, ensuring it reaches the workshop ready for immediate use. Which typical applications suit this long feeler strip? Long runs, valve settings, die clearance checks, toolroom adjustments and assembly inspections all benefit from the continuous 5 m format and narrow working width of this feeler strip. How does the accuracy specification affect workshop use? A nominal accuracy of ±0.05 mm provides reliable repeatability for standard machine-shop and maintenance tasks, giving a quantified tolerance that supports quality control processes. Can the strip be used in confined or narrow access points? With a 12.7 mm working width and lightweight construction, the strip is designed to access tighter clearances while remaining easy to position and stabilise. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Precision Feeler Gauge 0.03mm Thickness 12.7mm Width Supplied in Case - Metav IndustryLine
Take advantage of the combination of consistent thinness, extended length and workshop practicality for precise gap checks and straightforward shim production; the 0.03 mm thickness with a ±0.05 mm production tolerance ensures repeatable results across batches, while the 5 m roll format reduces changeovers and waste — order the precision strip directly via Metav Werkzeuge or consult our specialists if advice is required Precision Feeler Strip M318.603 — 0.03 mm thickness, 5 m roll (Metav IndustryLine) The Precision Feeler Strip is a narrow, long-format shim designed for fine-gap measurement and shimming tasks in precision engineering and toolmaking 0.03 mm consistent thickness 12.7 mm width for narrow gaps 5 m roll for continuous use Precision tolerance ±0.05 mm Precision where gaps matter The 0.03 mm thickness is produced with a nominal tolerance of ±0.05 mm, making this strip suited to tasks where reproducible thin layers are required. In practice, a uniform thickness across the roll minimises correction work during assembly and enables predictable shim stacking. The narrow 12.7 mm width permits insertion into confined spaces and between mating parts, while the extended 5 m roll format supplies multiple cuts from a single reel, reducing downtime caused by frequent part changes. This combination of length and consistency supports faster set-ups and more efficient batch processing in workshops and small production lines. Practical handling and application benefits Presented as a continuous reel, the strip simplifies on-the-fly adjustments and bespoke shimming without the need for multiple discrete blades. The roll format reduces packaging waste and supports just‑in‑time trimming to the exact length required. For measurement tasks the strip functions as both a feeler material and a lightweight shim, suitable for setting clearances, aligning components and creating controlled spacers. Markings or simple measurement templates can be used to cut repeatable pieces; the strip’s consistency in thickness supports predictable stack heights and reduces trial-and-error during finetuning. Longevity, storage and usage tips Stored flat and protected from corrosive atmospheres, the material retains its dimensional stability; avoid sharp bending near the cut edge to prevent kinking. Cutting is straightforward with shears suitable for thin metal or precision scissors; deburr the edge if a flush fit is required. For inventory and traceability the product is listed under SKU M318.603 and GTIN 4054469129457, aiding process documentation and reordering. For specific production environments or specialised applications, consult the technical data sheet to confirm mechanical compatibility and to plan repeatable installation routines. Contact Metav Werkzeuge today for tailored guidance on the Metav IndustryLine precision feeler strip M318.603 — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for application advice and availability Technical Data SKU: M318.603 GTIN: 4054469129457 Tariff number: 90173000 Facts Length: 5,000 mm Width: 12.7 mm Thickness: 0.03 mm Tolerance: ±0.05 mm Weight: 0.054 kg Special features Precision feeler strip Roll format for continuous use Category: Lehren / Messstifte Label: Präzisions-Fühlerlehren, 0,03 mm x 5 m 12,7 mm Breite FAQ What is the primary use of this feeler strip? The feeler strip M318.603 is intended for fine-gap measurement and as thin shim material in precision engineering and toolmaking tasks. How should the strip be cut and prepared for use? Cut the strip with appropriate shears and deburr the edge if a flush fit is required; repeated lengths can be produced from the 5 m roll for consistent shimming. What tolerance and repeatability can be expected? Manufactured to a nominal thickness of 0.03 mm with a production tolerance of ±0.05 mm, the strip provides repeatable layer thickness for stacking and clearance control. Is the product traceable for inventory and reordering? Yes — the article is listed under SKU M318.603 and GTIN 4054469129457 for straightforward procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Precision Feeler Gauge 0.18mm Thickness 12.7mm Width, Supplied in Case - Metav IndustryLine
Benefit from a narrow-profile solution that combines a consistent 0.18 mm thickness with a continuous 5,000 mm length and industrial repeatability of ±0.05 mm, delivering reliable shimming and clearance adjustment across the workshop. Order the precision feeler strip directly via Metav Werkzeuge or ask our consultants if needed. Präzisions-Fühlerlehren M318.618 — Precision feeler strip, 0.18 mm thickness, 5 m continuous length (Metav IndustryLine) The Präzisions-Fühlerlehren is a precision 0.18 mm feeler strip supplied in a 5 m continuous format, designed for gap measurement, shim fabrication and fine adjustment tasks in industrial metrology and maintenance. Precision thickness 0.18 mm for consistent shimming Continuous 5 m length for flexible use Narrow 12.7 mm width for tight clearances Industrial accuracy ±0.05 mm Consistent thickness for repeatable adjustments A constant thickness is the foundation of repeatable shimming and clearance control. The strip’s 0.18 mm nominal thickness, with an industrial accuracy of ±0.05 mm, provides a predictable datum for setting clearances and creating bespoke shims. This reliability reduces rework and inspection cycles: once the required gap is established using the strip, subsequent assemblies reproduce the same spacing without trial-and-error. The continuous format also means a single length can be trimmed to bespoke sizes, improving workflow efficiency in maintenance or production settings. Flexible format that adapts to confined spaces The continuous 5,000 mm length in a narrow 12.7 mm profile enables access into restricted joints and narrow slots where wider stock would not fit. The roll-style format (continuous strip) allows on-site cutting to exact dimensions, avoiding multiple pre-cut gauges and minimising inventory complexity. For technicians working on engines, gearboxes or tooling fixtures, this adaptability translates into faster setup times and fewer interruptions during assembly or repair operations. Practical handling that speeds up operations At a nominal weight of 0.122 kg, the strip is easy to transport and handle on the bench or in the tool trolley. Its narrow width makes it suitable for precision tasks where handling comfort and fine control matter. Using a single continuous strip instead of multiple discrete blades reduces changeover time and keeps the workspace uncluttered, contributing to smoother production flow and quicker job completion while maintaining measurement integrity. Traceability and identification for inventory control The item is supplied with clear identifiers for stock and procurement: Article number M318.618 and GTIN 4054469129563 simplify ordering and traceability in bills of materials. These identifiers help integrate the product into workshop inventory systems and ensure the right specification is selected for critical clearance tasks, supporting organised procurement and quality assurance processes. For precision shimming with Metav IndustryLine quality, request the M318.618 from Metav Werkzeuge in Emmerich or contact our consultants for detailed technical guidance and procurement support Technical data Article number: M318.618 GTIN: 4054469129563 eClass: 21170212 Facts Length: 5,000 mm Width: 12.7 mm Thickness: 0.18 mm Accuracy: ±0.05 mm Weight: 0.122 kg Tariff code: 90173000 Special features Precision feeler strip for gap measurement and shim work Continuous 5 m format for flexible on-site trimming Narrow profile suited to confined joints and slots FAQ What is the nominal thickness and tolerance of this strip? The strip is specified with a nominal thickness of 0.18 mm and an industrial accuracy of ±0.05 mm; the M318.618 provides a predictable basis for shimming and clearance checks. Can the continuous length be cut to size for custom shims? Yes, the 5,000 mm continuous format is intended to be trimmed on site, allowing bespoke shims to be produced quickly from the single strip. Is this product suitable for tight clearances and narrow slots? The narrow 12.7 mm profile is designed for access into confined joints and narrow slots where standard-width material would not fit. How is the item identified for ordering and stock control? Use Article number M318.618 or GTIN 4054469129563 to order and to ensure accurate inventory management. What applications are typical for this feeler strip? Typical uses include gap setting, shim fabrication, clearance measurement and fine adjustments in machinery maintenance and fixture assembly; the format supports both workshop and industrial metrology tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Precision Feeler Gauge 0.70mm Thickness 12.7mm Width In Plastic Case - Metav IndustryLine
Take advantage of the combination of precise thickness control, an extra‑long 5 m reach and delivery in a protective transport case to speed up large‑format setup and inspection tasks; order directly via Metav Werkzeuge or consult our specialists for application advice. Precision feeler gauge M318.670 — 0.70 mm thickness, 5 m measuring length (Metav IndustryLine) The Precision feeler gauge M318.670 is a long‑reach thickness reference designed for gap and clearance checks on large assemblies and components High precision ±0.05 mm tolerance 0.70 mm thickness, 12.7 mm width Extra‑long 5 m measuring length Supplied in protective transport case Reliable accuracy for large measurements The Precision feeler gauge M318.670 provides a controlled reference thickness of 0.70 mm across an extra‑long 5 m span, making it suitable where single‑piece feeler blades are too short. The specified industrial tolerance of ±0.05 mm aligns with common workshop quality levels and supports reproducible results on assembly and alignment tasks. The gauge’s 12.7 mm width helps to limit bending during handling, and the compact packaged weight keeps transport and deployment straightforward. This combination ensures repeatable thickness references when setting clearances or verifying fit on larger housings, flanges and fixtures. Practical format and protection for workshop use The form factor balances reach and handling: a narrow but sturdy strip offers good stiffness along its length while remaining manageable by one or two technicians. Supplied in a protective transport case, the tool reaches the workplace ready for use and is protected during storage and transit; for long lengths this is primarily a transport safeguard. The modest mass of the packaged item supports fast movement between benches and simplifies inclusion in onsite measuring kits. The construction supports straightforward handling in industrial environments where robustness and clarity of reference are decisive. Integration into quality workflows and applications This gauge is built for tasks such as setting gap clearances, checking flange offsets, and confirming consistent thickness references during assembly or inspection of large parts in fabrication and maintenance. Its long reach avoids repeated splicing of short blades and reduces handling time, contributing to a more efficient measurement routine. As a measured reference for clearance work, the strip can be combined with other metrology tools and inspection protocols to form part of a traceable workflow. For customers seeking consistent, workshop‑grade references, the tool complements Metav’s broader metrology range and logistic support from Emmerich. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine precision feeler gauge M318.670 into production or inspection processes and to arrange supply directly from Emmerich. Technical data Article number: M318.670 GTIN: 4054469129679 Category: Gauges / Measuring instruments Facts Measuring length: 5 m (5000 mm) Thickness: 0.70 mm Width: 12.7 mm Accuracy / tolerance: ±0.05 mm Weight (packaged): 0.36 kg Tariff number: 90173000 Special features Extra‑long measuring range — classified as Extra‑Long (2,000–5,000 mm) Supplied in a protective transport case Suitable for gap and clearance reference measurements Industrial workshop tolerance level FAQ What tasks is this long‑reach feeler gauge best suited for? The precision feeler gauge M318.670 is intended for gap and clearance checks on larger components where a standard short blade would be impractical, such as flanges, housings and fixture alignments. What tolerance and resolution does the gauge offer? The strip is specified with an industrial tolerance of ±0.05 mm, providing a reliable workshop reference for typical alignment and assembly verifications. Is the gauge delivered ready for use and protected? Yes, the product is delivered in a protective transport case, ensuring safe handling and storage during shipment and on site. Can this tool be integrated into existing inspection routines? The M318.670 can be used alongside conventional metrology equipment as a thickness reference for quality checks and assembly procedures; it complements other workshop measurement tools to streamline inspection workflows. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Precision Feeler Gauge 0.75mm Thickness 12.7mm Blade Width, Case Included - Metav IndustryLine
Take advantage of the combination of high precision, extended reach and a stable blade width to measure large components with confidence; the long continuous format reduces changeovers and speeds up inspection cycles. Order the gauge directly via Metav Werkzeuge or contact our consultants for application advice. Precision Feeler Gauge Strip M318.675 — 0.75 mm thickness, 5 m continuous length (Metav IndustryLine) The Precision Feeler Gauge Strip M318.675 is a long-format precision gauge strip designed for extended gap and clearance measurement in workshop and industrial inspection applications. Precision ±0.05 mm tolerance 0.75 mm thickness for fine gaps 5 m continuous length for extended reach 12.7 mm blade for stable contact Measure large assemblies without repeated joins The continuous 5 m length categorises this tool in the Extra‑Long range of precision gauges, which is ideal when single‑piece coverage is required for large housings, pipes or moulded components. A wider blade profile at 12.7 mm increases bending stiffness along the strip, reducing flex and improving the reproducibility of a single sweep. That means fewer alignment steps and a more efficient inspection routine when handling long runs or elongated parts. Maintain consistent, traceable readings across jobs Engineered for workshop quality control, the strip’s stated tolerance of ±0.05 mm supports reliable pass/fail decisions in routine inspections. The dimensional stability of the format reduces operator variation and helps standardise inspection procedures across teams. Used as a reference for gap checking and clearance verification, the tool contributes to faster decision‑making and predictable process outcomes, supporting both throughput and quality targets. Robust format for practical workshop use With a thickness of 0.75 mm, the blade offers the right balance between sensitivity for fine gaps and rigidity for practical handling during repeated measurements. The lightweight construction (approx. 0.384 kg) eases transport between workstations while the continuous strip format eliminates frequent blade changes, saving time on repetitive tasks. The design suits maintenance, assembly and inspection environments where long reach and straightforward handling are priorities. Contact Metav Werkzeuge for specification advice and procurement of the Metav IndustryLine precision feeler gauge strip; phone +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: M318.675 GTIN: 4054469129686 ECLASS: 21170212 Tariff number: 90173000 Manufacturer: Metav IndustryLine Specifications Length: 5,000 mm Thickness: 0.75 mm Width: 12.7 mm Tolerance: ±0.05 mm Weight: 0.384 kg Features / Versions Continuous precision feeler strip Category: measuring pins; gauges Intended use: gap and clearance measurement FAQ What level of accuracy can be expected with this strip? The specification lists a tolerance of ±0.05 mm for the Precision Feeler Gauge Strip M318.675, which is suitable for routine workshop inspection and comparative gap measurement. Is the strip suitable for measuring long pipes and housing assemblies? Yes, the continuous 5 m length is intended for extended components and large assemblies where uninterrupted coverage and fewer joins are required. How should this gauge be handled to ensure reproducible results? Maintain consistent contact pressure and use the same sweep technique; the strip’s 0.75 mm thickness and 12.7 mm width help reduce flex and improve repeatability during measurements. Does the product come with a calibration certificate? The product data does not specify a calibration certificate. For confirmation about calibration status and traceability, please contact Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com