Precision gauge blocks and plug gauges for reliable dimensional control
Mechanical gauge blocks and plug gauges are essential for tactile verification of threads, bores and gap dimensions, providing fast, unambiguous go/no-go results that enhance process reliability and reduce scrap. Designed for industrial metalworking and toolmaking, these precision tools support incoming inspection and final quality checks by delivering traceable measurements in applications such as thread inspection, bore diameter testing and spacing checks. Manufactured from specially hardened, low-distortion alloys and fine-lapped for minimal measurement uncertainty, the range includes thread plug gauges, precision plug gauges and calibration gauge blocks to ensure long-term repeatability and wear resistance.
5000mm Precision Feeler Gauge Strip 0.01mm, 12.7mm Width, Supplied in Case - Metav IndustryLine
Take advantage of the combination of 0.01 mm thickness and a continuous 5 m strip for reliable gap setting and repeatable checks; the 12.7 mm blade width improves handling and reduces measurement uncertainty. Order the Precision Feeler Gauge roll directly via Metav Werkzeuge or ask the consultants for tailored advice. Precision Feeler Gauge roll – 0.01 mm thickness, 5 m length (Metav IndustryLine) Precision Feeler Gauge roll – 0.01 mm thickness, 5 m length (Metav IndustryLine) is a flexible measurement strip designed for precise gap setting, calibration and fine adjustment tasks in workshops and toolrooms Precision thickness 0.01 mm 5 m continuous strip for extended coverage 12.7 mm width for stable handling Supplied in protective transport case Measure narrow gaps with industrial-grade precision The roll-format feeler provides a 0.01 mm nominal thickness that enables fine incremental adjustments and precise gap definition where coarse blades fall short. With an indicated accuracy 0.05 mm, the strip is suitable for routine shop-floor checks and setup tasks that demand consistent repeatability. The continuous 5 m length reduces interruptions during long runs or on large assemblies, so measurement tasks are faster and require fewer blade changes. The combination of thin gauge and long coverage supports efficient alignment, clearance testing and functional assembly verification. Ergonomic shape and packaging that support repeatable workflows A 12.7 mm blade width gives a reassuring contact area for manual feeding and positioning while keeping the strip narrow enough for confined spaces. The light weight and compact footprint make it easy to keep at the bench or in a tool trolley. Delivery in a protective transport case ensures safe storage and reduces the risk of damage or contamination between uses, maintaining the strip’s surface quality and measurement behaviour. The durable format helps preserve the measurement edge and simplifies handling during repetitive shop duties. Practical value for production, maintenance and calibration The continuous strip is a pragmatic choice for toolrooms, maintenance departments and production lines where time and consistency matter: fewer interruptions, less swapping of blades and a straightforward way to set or verify clearances. The roll format integrates well into existing quality workflows and supports traceable inspection routines when recorded alongside batch or process data. Backed by Metav’s commitment to accessible precision, the product supports efficient decision-making and dependable supply for everyday metrology needs. For a reliable supply and expert advice from Metav Werkzeuge in Emmerich, request a technical quote or stock check for the Precision Feeler Gauge roll (SKU M318.601) via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M318.601 GTIN: 4054469181318 Eclass: 21170212 Tariff number: 90173000 Facts Length: 5,000 mm Width: 12.7 mm Thickness: 0.01 mm Accuracy: 0.05 mm Weight: 0.046 kg Special features Supplied in protective transport case 5 m strip format Category: Lehren; Messstifte Label: Präzisions-Fühlerlehren, 0,01 mm x 5 m 12,7 mm Breite Manufacturer: Metav IndustryLine FAQ What are the nominal thickness and stated accuracy of the strip? The Precision Feeler Gauge roll has a nominal thickness of 0.01 mm and a stated accuracy of 0.05 mm (SKU M318.601). How long is the strip and how is it supplied? The strip measures 5 m in length and is supplied in a protective transport case for safe storage and transport. Which workshop tasks is this feeler strip suited to? The Metav IndustryLine feeler strip (M318.601) is suited to gap setting, clearance checks, assembly alignments and routine toolroom inspections where fine, repeatable measurement increments are required. Is the width suitable for confined spaces? The 12.7 mm width balances contact stability with access to narrow gaps, making the strip practical for both confined and general workshop applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Precision Feeler Gauge Strip 0.08mm Thickness 12.7mm Wide, Supplied in Transport Case - Metav IndustryLine
Take advantage of the combination of consistent precision, extra‑long reach and protective transport packaging to speed up setup and reduce rework on large components. Order this precision measuring tool directly via Metav Werkzeuge or consult our specialists for application advice. Precision Feeler Strip M318.608 — 0.08 mm thickness, extra‑long format (Metav IndustryLine) The Precision Feeler Strip M318.608 is a long‑reach gauge designed for setting and checking clearances and gaps in workshop and production environments 0.08 mm thickness strip 5 m continuous length 12.7 mm flat strip width Supplied in protective transport case Built for long components and reproducible gap setting The extra‑long format provides a 5 m length that enables measurements and adjustments across extended assemblies without splicing or multiple segments, reducing handling time and potential misalignment. The narrow 0.08 mm thickness is suitable for fine clearance work while the 12.7 mm width gives a stable contact surface for consistent feel‑and‑fit operations. These attributes combine to deliver reproducible set‑up results for fixtures, shafts and large housings. Industrial accuracy and transit protection for busy shops Manufactured to an industrial tolerance level of ±0.05 mm, the strip is suitable for routine quality checks and assembly tasks where standard production tolerances are required. At only 0.074 kg, the full length remains manageable for transport and deployment on the shop floor. The tool is supplied in a transport case (plastic or wooden), intended to protect the strip during shipment; for long items such as this, the case is primarily a transit aid rather than a storage solution. Practical benefits: faster set‑ups and fewer rejection loops Using a single continuous strip over a segmented approach cuts setup time and minimises measurement variability, which directly reduces rework and scrap. The form factor supports straightforward insertion into gaps and use as a reference shim for inspection or assembly operations, making it a pragmatic choice for production engineers and maintenance teams who require a reliable method for gap verification on large parts. For reliable long‑range gap control, order the Metav IndustryLine Precision Feeler Strip M318.608 from Metav Werkzeuge — shipped from Emmerich with transport protection and ready for industrial use. Technical data Article number: M318.608 GTIN: 4054469129501 Manufacturer: Metav IndustryLine Length: 5,000 mm Thickness: 0.08 mm Width: 12.7 mm Accuracy: 0.05 mm Weight: 0.074 kg Tariff number: 90173000 Supplied in transport case Numbers / Core technical data Length: 5,000 mm Thickness: 0.08 mm Width: 12.7 mm Accuracy: ±0.05 mm Weight: 0.074 kg Tariff: 90173000 Design / Special features Extra‑long measurement range classification (up to 5,000 mm) Continuous feeler strip format for large assemblies Flat strip geometry for stable contact Transport case included (for transit protection) FAQ What is the measurement range of the Precision Feeler Strip M318.608? The M318.608 provides an extra‑long measuring length of 5 m, intended for checks and adjustments on large components and assemblies. What accuracy can be expected from this feeler strip? The strip is specified with an industrial accuracy of ±0.05 mm, suitable for standard workshop and production tolerance checks. Is the tool delivered ready for transport? The Precision Feeler Strip M318.608 is supplied in a transport case (plastic or wooden) to protect the strip during shipment; the case is designed primarily for transit protection. For which applications is this long feeler strip suitable? This format is well suited to setting clearances, shimming and gap verification on long shafts, housings, fixtures and other large‑format components in production and maintenance. How does the width affect handling and measurement stability? The 12.7 mm width offers a stable contact area that improves tactile feedback and reduces the likelihood of tilting during insertion into gaps, contributing to more reproducible results. Is the strip heavy to handle during use? At 0.074 kg, the full strip remains lightweight for handling, while the extra length requires appropriate unrolling or support during use to avoid deformation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Precision Feeler Gauge Strip 0.12mm Thick 12.7mm Wide, Packaged Case - Metav IndustryLine
Take advantage of the combination of precise thickness control, long usable length and workshop-ready handling for reliable gap setting and wear compensation. Order the precision gauge strip directly from Metav Werkzeuge or contact their advisors for specification matching and supply assurance. Precision feeler gauge strip – 0.12 mm thickness, 5 m length (Metav IndustryLine) A Precision feeler gauge strip designed for accurate thickness measurement and gap setting over extended runs, suited to workshop, maintenance and production environments. Precision thickness 0.12 mm Long 5 m roll for extended coverage 12.7 mm usable width for stable handling Industrial accuracy ±0.05 mm Accurate thickness control for consistent setup The strip provides a constant 0.12 mm nominal thickness across a 5 m length, enabling repeated shimming and gap setting without frequent material changes. The stable 12.7 mm width offers a handling surface that resists folding and edge distortion, which helps maintain measurement repeatability during assembly and adjustment tasks. Selected for tasks where incremental thickness matters, the strip reduces the need for multiple discrete shims and simplifies on‑the‑spot thickness compensation. Optimised for workshop throughput and repair operations As a long, flexible gauge material, this product supports faster interventions in maintenance and tooling operations: fewer material changes mean reduced downtime and more efficient workflows. The declared accuracy ±0.05 mm places the strip within industrial tolerance ranges for everyday mechanical assembly and service work, making it suitable for setting clearances on bearings, valve seats and mating surfaces. The format is particularly useful where linear application of shim material or continuous gap measurement is required. Durable format and clear traceability for procurement Supplied under the Metav IndustryLine label, the strip balances practical durability with traceable specification for inventory control. The generous length and compact weight (approx. 0.096 kg) reduce logistical handling while offering enough material for multiple jobs before replenishment. For purchasing and planning, the roll format minimises waste compared with single-piece shims and supports leaner stock management in workshops and service fleets. For reliable supply and specification advice, contact Metav Werkzeuge to source the Metav IndustryLine precision strips directly and ensure the correct material and tolerances for the intended application — Metav Werkzeuge can assist with order planning and delivery to the workshop. Technical Data Article number: M318.612 GTIN: 4054469129532 Label: Präzisions-Fühlerlehren, 0,12 mm x 5 m 12,7 mm Breite Facts Thickness: 0.12 mm Length: 5000 mm Width: 12.7 mm Accuracy: ±0.05 mm Weight: 0.096 kg Tariff number: 90173000 Special features Format: long roll for continuous use Application: gap setting, thickness compensation, shimming Category: Gauges / Measuring tools FAQ What tasks is this strip best suited for? The precision feeler gauge strip is ideal for gap setting, shimming and thickness compensation in maintenance, assembly and toolroom applications where a continuous strip format speeds work. How precise is the material across its length? The strip is specified with an accuracy of ±0.05 mm, making it appropriate for industrial tolerance work where repeatable thickness is required. Can the strip replace individual shims in inventory? Yes, the 5 m roll format reduces the need for many single-thickness shims and supports on-site trimming to the exact length required for a task. Is the product traceable for procurement records? The article number M318.612 and GTIN 4054469129532 allow direct catalogue ordering and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Precision Feeler Gauge Strip 0.15mm Thickness 12.7mm Width Supplied in Case - Metav IndustryLine
Combining a long, continuous 5 m measuring strip with a thin 0.15 mm gauge and an industrial ±0.05 mm tolerance ensures reproducible gap setting and fast in‑process checks. Supplied ready for transport in a protective case, the item can be ordered directly via Metav Werkzeuge or discussed with our consultants for application support. Precision feeler strip, 0.15 mm × 5 m, 12.7 mm wide — Metav IndustryLine continuous gauge The Precision feeler strip, 0.15 mm × 5 m, 12.7 mm wide is a continuous measuring strip designed for consistent gap measurement, calibration and quality checks in production, toolmaking and workshop metrology. Continuous 5 m measuring strip Thickness 0.15 mm for fine gaps Tolerance ±0.05 mm industrial standard Accurate, repeatable checks for production control The long, continuous format of this measuring strip provides a practical way to verify gaps and clearances on long assemblies or repeat features without switching individual leaves. The 5 m length and 12.7 mm width give a stable contact surface that resists twisting during guided measurements, while the 0.15 mm thickness remains thin enough for fine adjustments. Thanks to the specified ±0.05 mm tolerance, the product aligns with common industrial accuracy expectations and supports consistent first‑pass quality, reducing rework and downtime by enabling rapid, objective verification at the workbench. Practical benefits for toolrooms and assembly lines This gauge simplifies routine tasks such as setting tool offsets, checking fixture clearance or validating joint fits on elongated components. The continuous strip format eliminates the need to handle multiple discrete leaves and speeds up repetitive measurement sequences, making it suitable where time efficiency and traceable results matter. The moderate weight of the strip helps keep handling comfortable during repeated use, and the continuous nature reduces the risk of misselecting a wrong thickness during a production run, supporting streamlined process control. Built for workshop handling and secure transport Delivered in a protective transport case, the measuring strip arrives ready for safe storage and movement between workstations or on site. The case protects the strip from kinking and contamination, helping to maintain the specified tolerance over time. The combination of robust handling features and compact storage supports both mobile inspection tasks and fixed workshop routines, preserving the instrument’s functional condition and enabling reliable measurements shift after shift. Integration with quality processes and traceability The strip’s clear technical specification and industry‑oriented tolerance make it straightforward to include in routine quality documentation and inspection plans. Marking and catalogue identifiers simplify traceability for calibration cycles and internal audits. Where calibration documentation or extended traceability is required, Metav Werkzeuge can advise on appropriate processes and integration into existing quality management systems, ensuring the measuring strip fulfils its role as a reproducible reference in the inspection chain. Contact Metav Werkzeuge for supply and application advice on the Metav IndustryLine precision feeler strip (SKU M318.615), available from Emmerich with tailored recommendations for production and calibration management Technical data Article number: M318.615 GTIN: 4054469129556 ECLASS: 21170212 Facts Length: 5,000 mm Width: 12.7 mm Thickness: 0.15 mm Accuracy: ±0.05 mm Weight: 0.108 kg Special features Delivered in protective transport case Category: Lehren; Messstifte Continuous measuring strip format FAQ What is the thickness and length of this measuring strip? The precision feeler strip is 0.15 mm thick and supplied as a continuous 5 m length (SKU M318.615) for extended checks and gap measurement tasks. Which accuracy class does the product meet? The strip is specified with an industrial accuracy of ±0.05 mm, matching common workshop and production inspection requirements. How is the item delivered and stored? The unit is supplied in a protective transport case to prevent damage and ease workplace storage; the case helps retain measurement integrity. Can the strip be used for setting tool offsets and fixture checks? Yes, the continuous format and 0.15 mm thickness make it suitable for setting offsets, validating clearances and performing repeatable fixture checks. Is the product traceable for quality documentation? The item is supplied with clear identifiers (GTIN and article number) to support inclusion in inspection records and inventory control. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Precision Feeler Gauge Strip 0.45mm Thickness 12.7mm Width, Supplied in Case - Metav IndustryLine
Take advantage of the combination of precise ±0.05 mm accuracy, a 5,000 mm measuring reach and a stable 12.7 mm blade for reproducible measurements on large components; order the gauge directly via Metav Werkzeuge or request specialist advice from our consultants. Precision feeler gauge strip, 0.45 mm × 5 m, 12.7 mm width — Metav IndustryLine Precision feeler gauge strip, 0.45 mm × 5 m is a long-reach, workshop-grade measuring strip designed for gap and runout verification on large assemblies and heavy machining components. Extra‑Long 5,000 mm reach for large components High repeatability with ±0.05 mm accuracy 12.7 mm blade for reduced flex and better guidance Delivered in a transport case suitable for long tools Accurate measurement over long distances for process reliability The Precision feeler gauge strip, 0.45 mm × 5 m delivers ±0.05 mm repeatability across its full length, making it a reliable choice for inspections where stability matters. The 0.45 mm thickness together with a 12.7 mm blade profile reduces lateral bending, so measurements remain consistent even when working on heavy housings or long shafts. By choosing a tool with a large measuring span, inspection routines that once required multiple setups can be consolidated, improving throughput and reducing fixture changes without compromising measurement confidence. Designed for heavy-duty workshop use and straightforward integration Engineered for demanding environments, the strip’s dimensions and material specification provide a balance between reach and stiffness. The 5,000 mm length classifies the instrument as Extra‑Long, which is particularly suitable for applications in heavy machining, pipework and large-format assemblies. The robust profile supports reproducible contact during comparative and runout checks, while the compact weight of 0.294 kg eases handling during two-person measurement tasks. Where traceable results are required in a production context, this solution supports fast, repeatable checks on large components. Practical handling, transport and storage considerations Long measuring tools require appropriate transport: delivery includes a protective transport case to prevent damage in transit. For instruments of this length, the case is intended primarily for transport rather than long-term storage, aligning with best practice for workshop handling of extended gauges. The compact blade width and modest weight aid manoeuvrability when aligning the strip along bores, flanges or segmented assemblies, and the clear numeric characteristics simplify documentation in quality records. A pragmatic choice for workshops seeking reliable, scalable inspection Selecting a long-reach precision strip reduces the need for multiple specialised gauges and supports standardised inspection procedures across production lines. The combination of length, blade geometry and ±0.05 mm accuracy makes this product a practical instrument for quality control routines that demand consistent, repeatable results on large parts. Built to be a dependable element of the measuring toolkit, it contributes to smoother production workflows and fewer measurement-related delays. Contact Metav Werkzeuge for tailored technical details or a quotation for the Metav IndustryLine precision feeler strip M318.645. Technical Data SKU: M318.645 GTIN: 4054469129624 Manufacturer: Metav IndustryLine ECLASS: 21170212 Facts Length: 5,000 mm Width: 12.7 mm Thickness: 0.45 mm Accuracy: 0.05 mm Weight: 0.294 kg Tariff number: 90173000 Special features Extra‑Long range classification (2,000–5,000 mm) Delivered in a transport case (wood/plastic) for long tools Suitable for gap and runout verification on large components Compact weight aids two-person handling when required FAQ What measuring range does this strip cover? The strip provides a measuring reach of 5,000 mm, suitable for large-format components and assemblies. What accuracy can be expected from this gauge? Measurements are reproducible to ±0.05 mm, making the strip appropriate for standard workshop quality checks. Is a transport case included with the product? Yes, the product is delivered with a protective transport case designed for long measuring tools; the case is primarily intended for transport. What is the product’s SKU and brand? The item is supplied under Metav IndustryLine with SKU M318.645. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Precision Feeler Gauge Strip 0.50mm Thickness 12.7mm Width, Calibrated in Transport Case - Metav IndustryLine
Take advantage of the combination of consistent 0.50 mm thickness, an extended 5 m length and a 12.7 mm blade width for reproducible gap setting and reduced rework. Order directly via Metav Werkzeuge or ask our consultants for application advice. Precision feeler gauge strip 0.50 mm x 5 m, 12.7 mm wide by Metav IndustryLine The Precision feeler gauge strip 0.50 mm x 5 m is a long-reach gauge blade designed for gap setting, shim selection and inspection tasks in precision engineering and maintenance environments. 0.50 mm constant thickness 5 m length for long components 12.7 mm precision blade width Industrial accuracy ±0.05 mm Consistent thickness for reliable gap setting A constant 0.50 mm thickness across the full length ensures repeatable results when setting or checking clearances. The declared accuracy ±0.05 mm places this blade in the industrial precision class, reducing ambiguity during assembly and inspection. By using a single, continuous strip rather than multiple short shims, setup times are shortened and the likelihood of cumulative error at mating surfaces is lowered. This leads to fewer stoppages for adjustment and a more predictable production flow. Long reach that simplifies large-assembly work The extended 5 m length is intended for measurements on long shafts, housings or assemblies where standard short blades would require joins or extensions. The 12.7 mm width provides a stable contact area for guided insertion and tactile feedback, helping to maintain alignment while probing gaps. Weighing roughly 0.318 kg, the strip is light enough for single-person handling in many workshop situations yet long enough to cover sizeable components without interrupting the inspection process. Workshop-proven precision with dependable supply Designed for day-to-day industrial use, the strip suits inspection, maintenance and set-up routines where clear, repeatable gap gauges are needed. Delivered under the Metav IndustryLine banner, the product benefits from Metav’s quality filter and European distribution network, a combination that has earned the trust of over 48,000 customers and supports uninterrupted workshop supply. For special requirements or integration into existing measurement protocols, Metav Werkzeuge offers technical consultation to match the gauge to the application. Contact Metav Werkzeuge for a technical consultation on the Metav IndustryLine 0.50 mm feeler gauge strip M318.650 — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability for specific assemblies and inspection plans Technical Data Article number: M318.650 GTIN: 4054469129631 Label: Präzisions-Fühlerlehren, 0,50 mm x 5 m 12.7 mm Breite Manufacturer: Metav IndustryLine Facts Length: 5,000 mm Thickness: 0.50 mm Width: 12.7 mm Accuracy: ±0.05 mm Weight: 0.318 kg Tariff number: 90173000 Special features Long-reach feeler gauge strip for large assemblies Suitable for gap setting and shim selection Industrial precision grade for workshop use Category: Lehren / Messstifte FAQ What are the nominal dimensions and tolerance of the strip? The strip measures 0.50 mm thick, 12.7 mm wide and 5 m long with an industrial tolerance of ±0.05 mm for the Metav IndustryLine feeler gauge strip M318.650. Is this strip suitable for measuring long shafts and housings? Yes, the 5 m length is specifically intended to cover long components and continuous gaps without the need for multiple short blades or joins. Does the product include a calibration certificate? No specific calibration certificate is listed for this product. If a traceable certificate is required for quality records, Metav Werkzeuge can advise on available options. Which workshop tasks is this gauge best suited for? The strip is best for gap setting, shim selection and visual/tactile inspection tasks in maintenance, assembly and precision engineering workshops. Can the strip be cut to shorter lengths for specialised use? The strip can be modified in the workshop to suit smaller tasks; however any cutting may affect the declared length and handling characteristics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Precision Feeler Gauge Strip 0.65mm Thickness 12.7mm Width, Calibrated, Supplied in Case - Metav IndustryLine
Combine long‑reach measuring range with stable 0.65 mm thickness and a narrow 12.7 mm profile to ensure precise gap setting across large components; take advantage of the continuous 5 m strip for fewer joints and faster alignment. Order the precision feeler strip directly via Metav Werkzeuge or ask our consultants if needed. Precision feeler strip M318.665 — 0.65 mm thickness, 12.7 mm width (Metav IndustryLine) Precision feeler strip for long‑length gap setting, shimming and alignment in workshops and toolrooms Precision thickness 0.65 mm Continuous 5 m strip length Narrow 12.7 mm width for tight gaps Weight 0.326 kg for stable handling Extended reach reduces handling and joint errors for large assemblies The continuous 5 m length classifies this strip as Extra‑Long, making it suitable for measurements and gap setting on large components where multiple short strips would introduce seams or handling errors. Using a single continuous gauge reduces the need for stitching measurements and therefore improves repeatable alignment across flanges, housings and long shafts. The long format offers time savings in setups and fewer reference transfers when aligning multi‑part assemblies. Consistent thickness supports reproducible fits and shimming With a defined thickness of 0.65 mm and a stated accuracy of ±0.05 mm, this strip supplies a reliable nominal shim thickness for routine workshop tasks. The stated precision corresponds to industrial gauging standards and is appropriate for general mechanical engineering, maintenance and fixture adjustment where consistent clearance and fit are required. The narrow tolerance range helps to maintain assembly quality and reduces rework stemming from variable spacer thicknesses. Slim profile improves access to confined gaps and contact points The 12.7 mm width gives a slim working profile that can be eased into narrow clearances and between mating parts without obstructing surrounding features. At a mass of 0.326 kg, the strip is easy to handle during positioning yet offers enough substance to lie flat for accurate placement. This combination of narrow width and manageable weight supports controlled manual handling during fitting, inspection and assembly tasks. Designed for workshop and toolroom versatility This long‑format gauge is aimed at workshop and toolroom environments where long edges, moulds or large weldments need a single, continuous reference. The product is listed under gauging and gauge blocks, and identification details (GTIN and SKU) make procurement and inventory straightforward for purchasing and quality departments. The continuous strip form is a practical solution for shimming operations, alignment checks and preparatory work prior to final machining. For long‑length precision measuring and efficient shimming, request supply and technical advice from Metav Werkzeuge in Emmerich — Metav IndustryLine specialists can assist with selection and delivery. Technical data Article number: M318.665 GTIN: 4054469129662 eClass: 21170212 Facts Length: 5,000 mm Width: 12.7 mm Thickness: 0.65 mm Accuracy: 0.05 mm Weight: 0.326 kg Customs tariff number: 90173000 Special features Category path: Messstifte; Lehren Label: Präzisions-Fühlerlehren, 0,65 mm x 5 m 12.7 mm Breite Story trigger: lehren FAQ What are the length and thickness of this strip? The Precision feeler strip M318.665 has a continuous length of 5 m and a nominal thickness of 0.65 mm. What tolerance can be expected for measurements with this gauge? The strip is specified with an accuracy of 0.05 mm, making it suitable for standard workshop gauging where this level of repeatability is required. For which applications is this long‑format gauge intended? It is intended for gap setting, shimming and alignment on large components in the workshop and toolroom, where a continuous reference length is advantageous. How can the product be identified for ordering and inventory? Use SKU M318.665 or GTIN 4054469129662 to identify the Precision feeler strip from Metav IndustryLine when ordering. Is the strip easy to handle in confined spaces? Yes; the 12.7 mm width and moderate weight of 0.326 kg provide a slim profile that can be inserted into narrow gaps while remaining stable during placement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Precision Feeler Gauge Tape 0.25mm Thickness 12.7mm Width In Plastic Case - Metav IndustryLine
The combination of a consistent 0.25 mm thickness, narrow 12.7 mm width and a continuous 5 m length delivers reliable shim and gap-setting performance across repetitive workshop tasks; the declared ±0.05 mm accuracy supports repeatable adjustments and inspection documentation. Choose this precision strip for efficient shimming, clearance control and simple on‑site trimming — order the precision feeler strip directly via Metav Werkzeuge or consult the Metav advisers if further specification is required. Precision feeler strip M318.625 — 0.25 mm thickness, 12.7 mm wide (Metav IndustryLine) The Precision feeler strip M318.625 is a narrow, continuous shim designed for gap setting, clearance measurement and shim applications in toolrooms, maintenance and production inspection. 0.25 mm uniform thickness 12.7 mm narrow width for tight gaps 5 m continuous length for repeated use ±0.05 mm declared accuracy Consistent thickness for repeatable assembly results A uniform thickness strip removes guesswork from shimming and clearance setting: the 0.25 mm nominal thickness, combined with a declared ±0.05 mm tolerance, gives a predictable baseline when aligning components or setting valve clearances. Using a defined shim value simplifies process documentation and reduces rework, because every adjustment is derived from a quantifiable increment. The narrow profile supports access to recessed slots and close-fitting joints, so the strip becomes a practical tool for both calibration-related tasks and everyday assembly checks. Continuous length and narrow width improve handling and economy The 5 m roll format supplies a long, continuous feed that can be cut to length on the workbench, eliminating frequent restocking of single blades. The 12.7 mm width is deliberately chosen for accessing slender gaps while still providing sufficient surface to hold and manipulate during insertion. At a low weight of around 0.16 kg for the full length, handling is straightforward and storage demands are modest. The material’s consistent cross-section makes it suitable for repeated trimming and reuse where the application allows, offering an economical approach compared with single‑use discrete shims. Practical compatibility with workshop workflows and inventory control Traceability and inventory management are simplified by the clear article identification: SKU M318.625 and GTIN enable rapid reordering and stock keeping. The strip integrates easily into common inspection and setting procedures, supporting mechanical fit‑up, tooling set‑up and maintenance checks. For situations requiring documented tolerances, the declared accuracy supports technical records and quality checks. If the application requires confirmation of suitability for a specific material or environment, Metav Werkzeuge can advise on alternative widths or grades to match the task. Contact Metav Werkzeuge for application advice and to secure the Metav IndustryLine precision feeler strip M318.625 for your workshop needs; local stock and ordering details are available from Metav Werkzeuge in Emmerich. Technical data SKU: M318.625 GTIN: 4054469129587 Tariff number: 90173000 Manufacturer: Metav IndustryLine Dimensions & weights Length: 5,000 mm Width: 12.7 mm Thickness: 0.25 mm Weight: 0.16 kg Accuracy & classification Declared accuracy: ±0.05 mm Classification: Lehren eCl@ss: 21170212 Label: Präzisions-Fühlerlehren, 0,25 mm x 5 m 12,7 mm Breite FAQ What is the nominal thickness and tolerance of the strip? The strip is supplied with a nominal thickness of 0.25 mm and a declared tolerance of ±0.05 mm for consistent shim values. How long is the continuous strip and can it be cut to size? The product is supplied as a continuous 5 m length that can be trimmed on the bench to the required piece length for shimming or gap setting. Which workshop tasks is this strip best suited to? This narrow, consistent‑thickness strip is suited to clearance measurements, shim adjustments, tooling set‑up and final fit‑up where a defined shim value and narrow width are required. What identification helps with reordering and inventory? Reorder using SKU M318.625 or GTIN 4054469129587 to ensure the same product specification is supplied again. Is the strip suitable for repeatable use in production settings? Yes; the continuous length and uniform cross‑section make it practical for repeated trimming and use in production environments where defined shim increments are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Precision Feeler Gauge Tape 0.55mm Thickness 12.7mm Width in Case - Metav IndustryLine
Take advantage of the combination of high thickness accuracy, generous 5 m continuous length and a standard 12.7 mm blade width for reliable setup and repeatable adjustments in production. Order the precision feeler strips directly via Metav Werkzeuge or enquire with our consultants for application advice. Precision feeler strips M318.655 – 0.55 mm thickness, 5 m roll (Metav IndustryLine) A precision measuring strip for gap setting, clearance verification and repetitive fine‑adjustments in workshop and inspection environments High-precision 0.55 mm thickness Long 5 m roll for continuous use Consistent 12.7 mm blade width Precision manufacturing by Metav IndustryLine Faster, reproducible setups through defined thickness Defined thickness is the basis for repeatable assembly and calibration. The 0.55 mm nominal thickness combined with an industrial ±0.05 mm classification ensures that each strip section performs as a reliable reference during machine set-up and clearance checks. Using a continuous measuring strip reduces the need to change blades frequently, shortening preparation times and lowering the risk of handling errors. The emphasis on measurable tolerance supports predictable process windows in machining and inspection. Continuous strip form for efficient workflow A single 5 m roll supplies multiple workstations and long measurement runs without interruption. The 12.7 mm blade width offers a balance between handling comfort and contact area, aiding stable insertion into narrow gaps and consistent surface contact during verification tasks. The format is well suited to maintenance rounds, jig adjustments and repeated gap checks where several measurements are taken in sequence. The relatively low mass of the roll promotes easy transport between benches while maintaining robust dimensional stability. Built-in traceability and workshop integration Catalogue data and identifiers are provided for inventory control and procurement processes, supporting orderly replacement cycles and audit trails. The design matches common shop practices for gauges and measuring pins, enabling seamless integration into toolrooms and quality departments. Metav’s distribution and quality filter in Emmerich complement the product with reliable supply and documented manufacturing provenance, strengthening long‑term availability and consistency across batches. For supply and technical procurement of Metav IndustryLine precision feeler strips, contact Metav Werkzeuge in Emmerich for personalised advice and swift delivery coordination. Technical data Article number: M318.655 GTIN: 4054469129648 Brand: Metav IndustryLine Tariff number: 90173000 eClass: 21170212 Facts Length: 5,000 mm Width: 12.7 mm Thickness: 0.55 mm Accuracy: ±0.05 mm Weight: 0.352 kg Special features Continuous 5 m strip Precision measuring gauge Category: Gauges / Measuring pins SKU: M318.655 FAQ What applications suit these precision feeler strips? The precision feeler strips M318.655 are designed for gap setting, clearance checks and repetitive adjustment tasks in machine shops, jig and fixture work, and quality inspection routines. How accurate is the measuring strip and how is that stated? Accuracy is specified as ±0.05 mm; the combination of 0.55 mm nominal thickness and this tolerance gives a stable reference for routine setup and verification. Is the strip format suitable for continuous measurement runs? Yes. The 5 m continuous roll format allows multiple consecutive measurements without changing items, making it efficient for maintenance rounds and long runs. Which product identifiers should be used for procurement and stock management? Use the SKU M318.655 and GTIN 4054469129648 when ordering or logging the item in inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500µm Surface Comparison Plates Set For Vertical Milling 6-Piece Ra 500–16 µm, Grade AA - Metav IndustryLine
Take advantage of accurate, standardised reference grades and a compact, workshop‑friendly form factor to speed up surface‑finish decisions and reduce rework. Choose the six‑grade vertical milling surface comparison set for consistent visual and tactile checks; order directly via Metav Werkzeuge or consult our specialists if required. Surface Comparison Plates "Vertical Milling" – 6‑piece set, Ra 0.4–12.5 µm | Metav IndustryLine A Surface Comparison Plate "Vertical Milling" set for rapid verification of surface roughness on milled components and routine shop‑floor quality checks Six reference grades 12.5–0.4 µm Ra Purpose‑designed for vertical milling inspections Compact set for workshop quality control Rapid, measurable assessment of surface finish The set offers a clear scale of reference grades that represent common milling finishes, from coarse to fine. With nominal Ra values of 12.5, 6.3, 3.2, 1.6, 0.8 and 0.4 µm, the plates allow immediate visual and tactile comparison against workpieces, accelerating decision‑making in production and inspection. The defined steps correspond to industry recognitions (AA grades 500 / 250 / 125 / 63 / 32 / 16), providing a reproducible baseline for acceptance criteria and reducing subjective judgement during surface checks. Practical design for everyday workshop use Designed for routine use in machining environments, the comparators are intended for direct application in vertical milling contexts. The robust, compact format suits bench‑top or portable inspection workflows, keeping handling time to a minimum. Because the set groups the most commonly required roughness levels, it streamlines in‑process control and incoming inspection alike, supporting faster throughput and fewer call‑backs. The low overall mass supports easy storage and quick deployment at the machine or inspection station. How the plates support quality assurance processes Use the plates for side‑by‑side comparison to confirm that finishing operations meet specified roughness bands, or to check the effect of cutter geometry and feed/speed adjustments after test cuts. The collection is a pragmatic complement to profilometers where fast, on‑the‑spot decisions are needed: the plates provide an immediate reference that helps avoid unnecessary measurement cycles and supports consistent workmanship across teams. For formal documentation, these reference plates serve as a visual standard in quality reports and operator training. Contact Metav Werkzeuge for technical advice or to request this Metav IndustryLine surface comparison set; e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M318.036.3 GTIN: 4054469146294 Tariff code: 90173000 Manufacturer: Metav IndustryLine Facts Pieces per set: 6 Nominal Ra (µm): 12.5; 6.3; 3.2; 1.6; 0.8; 0.4 AA grades: 500; 250; 125; 63; 32; 16 Weight: 0.2 kg Special features Application: surface comparison for vertical milling Package type: set for workshop reference Use: visual and tactile finish assessment Category: inspection gauges / comparators FAQ What roughness grades are included in the set? The Surface Comparison Plates "Vertical Milling" include reference Ra grades of 12.5, 6.3, 3.2, 1.6, 0.8 and 0.4 µm (AA 500 / 250 / 125 / 63 / 32 / 16) and are supplied as the Metav IndustryLine set M318.036.3. How should the plates be used for inspection? The Metav IndustryLine Surface Comparison Plates M318.036.3 are intended for side‑by‑side visual and tactile comparison against milled components to verify surface finish quickly on the shop floor. Are the plates supplied with a calibration certificate? The Surface Comparison Plates "Vertical Milling" (M318.036.3) are delivered as a reference set for inspection; they are provided without an ISO 17025 calibration certificate. Which applications suit this comparator set best? The Metav IndustryLine set M318.036.3 is optimised for vertical milling finish checks, routine quality control, incoming inspection and operator training where immediate surface assessment is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 11.45mm Test Pin Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the precise ±0.002 mm tolerance together with the compact 11.45 mm diameter and a 50 mm shank for reliable go/no‑go and end‑measure checks in busy workshops; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single, 11.45 mm Ø, length 50 mm — Metav IndustryLine The gauge pin, single, 11.45 mm Ø, length 50 mm is a hardened inspection pin designed for precise plug and fixture verification in workshop and small‑parts metrology. Workshop version for everyday use Diameter guaranteed at 11.45 mm Tolerance ±0.002 mm for fine inspection 50 mm shank for secure seating Precision that minimises inspection variability The compact inspection pin delivers a measured tolerance of ±0.002 mm, which corresponds to a two‑micrometre sensitivity and supports tight control limits in standard quality checks. Made from special steel, the pin provides dimensional stability that helps reduce the influence of thermal and mechanical variation during repetitive checks. Such a tolerance level places the component in the realm of high‑precision workshop gauging, enabling confident decision rules for pass/fail measurements and repeatable setup references in production. Compact design suited to fine mechanical tasks With an external diameter of 11.45 mm and a 50 mm length, the pin falls into the micro‑range for caliper and gauge tooling, making it particularly useful where space is limited but accuracy remains critical. The short, stiff geometry supports minimal bending and straightforward handling when used as a master plug or in fixture alignment. This compact format is appropriate for small components, gauge blocks and delicate assembly jigs where ease of placement and stability are decisive for reliable readings. Robust workshop handling and serviceability Specified as a workshop version, the pin is built to withstand routine handling while maintaining calibrated dimensions. The choice of special steel balances wear resistance and machinability so that the pin remains true over repeated cycles without introducing avoidable wear to mating parts. The straightforward geometry simplifies inspection and replacement logistics: when a master pin is identified as out of tolerance, a like‑for‑like swap restores benchmark accuracy without complex recalibration procedures. Contact Metav Werkzeuge for availability and tailored advice on the Metav IndustryLine gauge pin M323.B45 — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com for prompt workshop support. Technical Data Article number: M323.B45 GTIN: 4061905064593 Label: Prüfstift, einzeln, 11,45 mm Länge 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 11.45 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Accuracy class: ±0.002 Special features Material: Special steel Version: Workshop execution Category: Gauge pin / Inspection pin SKU: M323.B45 FAQ What is the declared tolerance of this gauge pin? The Metav IndustryLine gauge pin M323.B45 is specified with a tolerance of ±0.002 mm, suitable for precise workshop gauging and tight inspection limits. Can this pin be used for fixture alignment in assembly jigs? Yes, the 50 mm shank and compact 11.45 mm diameter make this inspection pin appropriate for fixture alignment and plug checks in small to medium assembly jigs. What material is the pin made from and how does that affect wear? The pin is manufactured from special steel, chosen to deliver a balance of wear resistance and dimensional stability under typical workshop handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 14.02mm Gauge Pin, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of high repeatability, workshop‑ready protection and a tight ±0.002 mm tolerance for consistent end‑dimension inspection; order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Gauge pin, single 14.02 mm (50 mm length) — Metav IndustryLine A gauge pin, single 14.02 mm, engineered for precise end‑dimension checks and robust workshop inspection tasks. Special steel construction for durability Precision ground to ±0.002 mm tolerance 14.02 mm diameter for end‑dimension checks Delivered in protective transport case Precision that supports reliable inspection This measuring pin is precision ground to a tolerance of ±0.002 mm, which ensures highly reproducible results during go/no‑go checks and dimensional verification. The special steel construction delivers stable geometry under repeated contact, reducing the risk of false readings caused by surface wear. In practical terms, this level of accuracy supports quality control routines where small deviations have direct impact on assembly fit and downstream processes. The hard‑finished surface also eases cleaning and prolongs service life, so inspection cycles remain efficient and predictable. Built for workshop use and safe handling Designed as a workshop version, the pin’s 50 mm length offers a secure grip while measuring or inserting into fixtures; the compact form factor suits bench jigs and handheld inspection tasks. Delivered in a protective transport case, the item is ready for safe storage and dispatch between workstations, reducing downtime caused by handling damage. The combination of robust material and transport protection makes the component suited to routine shop‑floor use where durability and rapid access are priorities. Applications and integration into inspection workflows As a single gauge pin, this tool is intended for end‑dimension checks, alignment aids and fixture set‑up in small‑to‑medium series production. The nominal 14.02 mm diameter is suitable for verifying bores, holes and mountings within tight tolerance bands, and the pin can be integrated into existing inspection fixtures or used alongside comparators and micrometres for double‑control routines. Its straightforward geometry means it is also convenient as a reference artefact in setting up measuring stations. Practical handling and procurement benefits The compact mass and finished surface ensure rapid handling and minimal measurement disturbance during repetitive checks. Supply through Metav benefits from a European quality‑filtering process that supports consistent stock and clear traceability back to the workshop level. For procurement and inventory planning, the simple form factor and robust finish reduce replacement frequency, contributing to lower lifecycle handling and maintenance effort. Contact Metav Werkzeuge for procurement and workshop advice on the Metav IndustryLine gauge pins — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.E02 GTIN: 4061905068614 Material: Special steel Tolerance: ±0.002 mm Length: 50 mm Nominal diameter: 14.02 mm Weight: 0.1 kg Numbers / Core technical data Diameter: 14.02 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Protective transport case included Precision ground surface Single gauge pin Category: Gauge pins FAQ What level of dimensional accuracy does this gauge pin provide? The gauge pin is ground to a tolerance of ±0.002 mm, which is suitable for demanding workshop and inspection tasks requiring tight repeatability. Is the pin suitable for continuous shop‑floor use? Yes, the workshop version and the special steel finish are intended to withstand regular handling; the protective transport case further supports shop‑floor logistics. Can the pin be used for bore verification and fixture set‑up? The 14.02 mm nominal diameter makes the pin well suited for end‑dimension checks, bore verification and fixture alignment in small‑ to medium‑series production. What is supplied with the gauge pin on delivery? The single gauge pin is supplied in a protective transport case to prevent handling damage during transport and storage. How does this item integrate into a quality workflow from Metav? As part of the Metav IndustryLine, the pin fits standard inspection routines and benefits from Metav’s European quality‑filtering and procurement logistics. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 14.05mm Gauge Pin, Single, Special Steel, Workshop Version in Case - Metav IndustryLine
Compact workshop-grade performance with precise dimensions and reliable handling: the 14.05 mm diameter, 50 mm length and ±0.002 mm accuracy combine for consistent end‑measure checks and fixture references. The instrument is supplied in a protective case and is ready for immediate use in production and inspection environments. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.E05 — 14.05 mm diameter, 50 mm length (Metav IndustryLine) Gauge pin M323.E05 is a workshop-grade inspection pin designed for end‑measure verification and fixture alignment in precision engineering and quality control. Workshop execution, robust design 14.05 mm diameter, ±0.002 mm tolerance 50 mm length, compact handling Delivered in protective case Repeatable precision for end‑measure control The gauge pin is manufactured for repeatability where tight clearances matter: a nominal 14.05 mm diameter maintained to ±0.002 mm ensures that each reference contact produces comparable results. In practical terms, this level of accuracy supports fine inspection tasks and end‑measure controls in small to medium assemblies; the item falls into the micro range of measuring tools (suitable for applications between 10 mm and 100 mm), where stiffness of short shanks and minimal bending are decisive for measurement fidelity. The declared tolerance is a direct guarantee for processes that depend on repeatable go/no‑go references. Workshop-ready construction for reliable handling Constructed from special steel and finished as a workshop execution, the pin balances durability with manageable mass: the 50 mm length aids access in tight fixtures while the modest 0.1 kg weight simplifies manual positioning. Supplied in a protective case, the part arrives ready for storage or safe transport to the bench, reducing setup time and the risk of handling damage. The solid material and workshop specification provide robust contact surfaces that withstand frequent use without quick degradation, supporting dependable on‑bench measurement routines. Integration into inspection and jig workflows Designed to serve as a repeatable reference in fixtures, jigs and plug checks, the pin slots easily into established inspection chains and gauging rigs. Its compact dimensions make it suitable for small bores, end‑measure stops and alignment aids; the consistent diameter is ideal where interchangeability and quick verification cycles are required. For traceable procurement and dependable supply, this component is offered under the Metav IndustryLine range, which focuses on accessible precision and steady availability from the Emmerich stockroom. The gauge pin M323.E05 therefore combines practical workshop ergonomics with the precision demanded in routine quality assurance. Choose Metav Werkzeuge for reliable workshop precision — contact our team in Emmerich to discuss availability and delivery of the M323.E05 gauge pin (Metav IndustryLine) from stock. Technical data Article number: M323.E05 GTIN: 4061905065903 Description: Gauge pin, single, 14.05 mm diameter, 50 mm length Facts Diameter: 14.05 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop execution Supplied in protective case Category: Gauge pins SKU: M323.E05 Brand: Metav IndustryLine FAQ What tolerance does this gauge pin hold? The gauge pin M323.E05 is specified with an accuracy of ±0.002 mm, suitable for fine inspection work and repeatable reference tasks. Can this pin be used for bore checks and end‑measure stops? Yes — the 14.05 mm diameter and 50 mm length make this probe ideal for small bore verification, end‑measure references and fixture alignment in workshop environments. What material is the pin made from? The component is made from special steel, selected for durable contact surfaces and regular workshop use. Is the gauge pin supplied ready for transport and storage? The product is delivered in a protective case as standard, which simplifies safe transport and bench storage. Which product range and SKU should be referenced when ordering? Order by referencing Metav IndustryLine and the SKU M323.E05 to ensure the correct gauge pin is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 16.14mm Gauge Pin Workshop Version, Special Steel, Precision ±0.002 - Metav IndustryLine
Take advantage of the combination of high radial accuracy ±0.002 mm, a compact 16.14 mm diameter and a robust 50 mm length for reproducible end-measurements; order the gauge pin directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. Gauge pin, single, 16.14 mm Ø, length 50 mm (M323.G14) — Metav IndustryLine Gauge pin, single, 16.14 mm Ø for precision end-measurements and fit checks in inspection benches and toolrooms Workshop-grade construction for daily use Diameter 16.14 mm with ±0.002 mm accuracy 50 mm length for secure end-contact measurement Made from special steel for wear resistance Reliable sub-millimetre control for small components The gauge pin is designed for repeatable end-measurements where dimensional certainty matters. With a nominal diameter of 16.14 mm and a stated accuracy of ±0.002 mm, the pin sits in the micro measurement category (suitable for ranges up to 100 mm), making it ideal for fine mechanical parts, small bores and precision fit verifications. The tight tolerance reduces uncertainty in go/no-go and plug gauge applications and supports consistent quality control across production runs. Durable construction that suits workshop environments Constructed in special steel and supplied in the workshop execution, the pin combines hardness with dimensional stability to withstand regular handling. The 50 mm length provides a secure bearing surface for end-face contact without compromising stiffness, while a mass of 0.15 kg ensures tactile handling during bench checks. These attributes translate into lower wear rates, longer intervals between replacements and dependable surface contact, helping to maintain measurement consistency over time. Practical integration into inspection routines Compact form factor and a straightforward geometry simplify use on manual gauges, fixture checks and calibration benches. The single-pin design supports end-of-shaft checks and small-assembly verification, and the clear labelling (SKU M323.G14, GTIN 4061905070266) eases inventory management and traceability. For workshops seeking to standardise inspection tooling, this pin offers a pragmatic balance of precision, durability and ease of handling, ensuring that inspection steps remain fast and verifiable. Contact Metav Werkzeuge to confirm suitability for specific inspection tasks and to secure timely delivery from stock at the Emmerich quality centre. Technical data Article number: M323.G14 GTIN: 4061905070266 Label: Prüfstift, einzeln, 16,14 mm Länge 50 mm Facts Diameter: 16.14 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Weight: 0.15 kg Category: Messstifte Special features Material: Special steel Version: Workshop execution Intended use: End-measurements / fit checks Story trigger: endmasse FAQ What accuracy can be expected from this gauge pin? The gauge pin offers an accuracy of ±0.002 mm, suitable for demanding inspection tasks requiring sub-hundredth-millimetre repeatability. Is the pin suitable for daily workshop use? Yes; the workshop-grade construction and special steel make the pin robust for regular bench measurements and fit checks. Which measurement tasks is this pin intended for? Ideal for end-measurements, plug-fit verification and small-bore checks where a 16.14 mm reference is required. How is the product identified for stock and traceability? The item is listed under SKU M323.G14 and GTIN 4061905070266 for streamlined inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 16.15mm Test Pin Single Workshop Version Special Steel - Metav IndustryLine
Take advantage of the combination of workshop-grade construction, ±0.002 mm accuracy and a compact 50 mm length for reliable end-measurements; order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. M323.G15 gauge pin — 16.15 mm diameter, 50 mm length (Metav IndustryLine) The M323.G15 gauge pin is a single precision pin designed for end‑measurement and verification tasks in workshop and inspection environments. High-precision ±0.002 mm tolerance Diameter 16.15 mm for end-measurements 50 mm length with workshop-grade finish Made from special steel for repeatable use Precision that keeps production tolerances tight The gauge pin delivers a measured tolerance of ±0.002 mm, which provides confidence when checking end dimensions and fit tolerances in production or incoming inspection. With a nominal diameter of 16.15 mm, the pin is suited to final-size checks and verification of bore fits where minimal deviation matters. The fine tolerance reduces rework and scrap by enabling clear go/no‑go decisions at the bench, supporting faster throughput and consistent part quality. Durable construction for repeated workshop use Manufactured from special steel and specified as a workshop configuration, the pin combines wear resistance with stable geometry across repeated use. Its 50 mm length and compact mass (0.15 kg) ensure easy handling while maintaining the rigidity required for reproducible contact measurements. The robust finishing reduces the risk of surface damage that could bias results, so routine inspections remain reliable without frequent replacement. Simple integration into inspection routines and inventory Delivered as a single item with a clear SKU and GTIN, the pin is easy to catalogue within existing metrology setups. The compact format simplifies storage on inspection benches and in tool kits, while the clear technical specifications support traceable process documentation. Use of a standardised measuring pin aids repeatability across shifts and locations, making it straightforward to maintain a consistent quality baseline in mixed production environments. Contact Metav Werkzeuge for tailored advice on incorporating the M323.G15 gauge pin into inspection workflows or to request a quote from Metav IndustryLine via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M323.G15 GTIN: 4061905068089 Label: Prüfstift, einzeln, 16,15 mm Länge 50 mm Facts Diameter: 16.15 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Workshop version Single gauge pin Eclass: 21170231 FAQ What measurement accuracy can be expected from this gauge pin? The M323.G15 gauge pin is specified with an accuracy of ±0.002 mm, making it suitable for fine end‑measurement and verification tasks. Is the pin supplied individually or as a set? This item is supplied as a single gauge pin; the product designation indicates a single unit rather than a multi‑piece set. Which material is used for the pin and what are the benefits? The pin is made from special steel, chosen for dimensional stability and wear resistance so that repeated contact measurements remain consistent. Can this pin be used for checking bore diameters and end fits? Yes, the diameter of 16.15 mm and the compact 50 mm length make the pin well suited to end‑measurements and fit verification in bores and mating components. How is the product identified for procurement and inventory? Identification is via SKU M323.G15 and GTIN 4061905068089, which support straightforward cataloguing and reordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm 18.02mm Gauge Pin Single Workshop Version, Special Steel, ±0.002 Accuracy - Metav IndustryLine
Take advantage of the combination of industrial-grade precision, robust special-steel construction and compact handling for reliable reference measurements; order this precision gauge pin directly via Metav Werkzeuge or consult our specialists for specification matching. Gauge pin, single 18.02 mm — precision reference pin, 50 mm length (Metav IndustryLine) A gauge pin, single 18.02 mm, engineered as a workshop-grade reference for fit checks, end‑measurements and assembly verification Diameter 18.02 mm precision pin Tolerance ±0.002 mm Special steel construction Workshop-grade 50 mm length Precision where it matters for routine checks The compact reference pin delivers a consistently reproducible datum thanks to its ±0.002 mm tolerance, making it suitable for workshop inspection and bench checks. Manufactured from special steel, the component resists everyday wear while maintaining dimensional stability; this ensures that a single pin can serve as a trustworthy reference for repeated fit and clearance tests. The measured accuracy class supports routine quality control tasks in metalworking and assembly environments. Compact design that simplifies handling and storage With a 50 mm length and a nominal diameter of 18.02 mm, the pin combines reach and manoeuvrability in one compact package. The short, rigid form reduces flex during insertion and extraction, which supports reproducible measurements and speeds up gauging work. The moderate mass and ergonomic proportions allow straightforward handling at the workstation, reducing the time required for repetitive verification tasks without compromising on stability. Clear specification for integration into inspection workflows The delivered reference pin is clearly dimensioned and numerically specified, facilitating direct use in measurement protocols and documentation. The precise nominal diameter and declared tolerance enable integration with go/no‑go checks, plug gauges or bespoke test rigs where a defined fit diameter is required. The straightforward specification simplifies procurement and inventory management for production and maintenance departments alike. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine gauge pin (SKU M323.I02) can be integrated into existing inspection routines and to request further technical details Technical data Article number: M323.I02 GTIN: 4061905071034 ECLASS: 21170231 SKU: M323.I02 Facts Diameter: 18.02 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.15 kg Special features Material: Special steel Version: Workshop execution Label: Gauge pin, single, 18.02 mm length 50 mm FAQ What is the declared dimensional tolerance for this gauge pin? The gauge pin is specified with a tolerance of ±0.002 mm, ensuring high repeatability for reference and fit checks; product reference M323.I02 from Metav IndustryLine. Which material is used for the pin? The component is manufactured from special steel, chosen for wear resistance and dimensional stability under normal workshop conditions. What are the exact dimensions of the pin? Nominal diameter 18.02 mm, overall length 50 mm, weight approximately 0.15 kg; SKU M323.I02. Is this pin intended for workshop use or laboratory metrology? The pin is described as a workshop execution, optimised for reliable routine measurements and assembly verification in production and maintenance environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Ceramic Setting Ring 0.001mm Accuracy, Stainless Antimagnetic ZrO2 HV1250 - Metav IndustryLine
The combination of ±0.001 mm repeatability, zirconia ceramic construction and HV 1250 surface hardness ensures reliable setting references and long service life; order directly through Metav Werkzeuge or speak to the consultants for tailored procurement advice. Keramik-Einstellring 50 mm 0.001 mm (63x16) — Ceramic setting ring for workshop reference measurements by Metav IndustryLine Keramik-Einstellring 50 mm 0.001 mm (63x16) is a compact, workshop-grade ceramic gauge ring designed for sub-micron setting and comparative tasks across precision metrology workflows Ultra-fine accuracy ±0.001 mm Zirconia ceramic, corrosion-resistant Antimagnetic and wear-resistant Workshop-grade hardness HV 1250 Precision where repeatability saves time The gauge ring offers ±0.001 mm nominal accuracy, making it suitable as a high-resolution reference for setting and alignment tasks. Thanks to the zirconia ceramic substrate, dimensional stability under thermal variation is significantly better than many metallic equivalents; this stability converts into fewer re-checks and more predictable setup times. The net effect is a measurable reduction in process variation when the ring is used as the comparative datum in routine adjustments and verification sequences. Durability that withstands a workshop environment Constructed from stainless zirconia ceramic, the component combines corrosion resistance with a wear-resistant surface that tolerates frequent contact without rapid degradation. The specified HV 1250 hardness contributes to long-term geometric integrity, reducing the need for replacement and the downtime associated with component wear. The antimagnetic properties keep the reference free from magnetic interference, which is especially relevant when working near magnetic clamps or in environments with magnetic tooling. Compact format and practical integration for everyday workflows With a nominal setting diameter of 50 mm and outer dimensions (63 x 16 mm), the ring fits comfortably in bench fixtures and holder systems while remaining easy to handle during routine tool setting. The workshop-oriented design supports rapid comparative measurements and simplifies the transfer of reference dimensions across gauges and fixtures. Labelling and the clear SKU simplify procurement and inventory: M313.K50 is ready to be referenced in ordering lists and equipment registers. For precise, durable setting references in workshop and production environments, contact Metav Werkzeuge to request availability of the Metav IndustryLine ceramic setting ring (SKU M313.K50) and arrange next-step procurement from Emmerich. Technical data Article number: M313.K50 Description: Keramik-Einstellring 50 mm 0.001 mm (63x16) Brand: Metav IndustryLine Facts Nominal diameter: 50 mm Outer dimensions: 63 x 16 mm Accuracy: ±0.001 mm Hardness: HV 1250 Special features Material: zirconia ceramic Surface: stainless, wear-resistant Magnetic behaviour: antimagnetic Design: workshop version FAQ What level of accuracy does the ceramic setting ring provide? The Metav IndustryLine ceramic setting ring delivers an accuracy of ±0.001 mm, making it suitable for high-resolution comparative and setting tasks in precision workshops. Which material is used and how does it benefit use? The ring is made from zirconia ceramic, which combines corrosion resistance and low thermal expansion with a wear-resistant surface, improving long-term dimensional stability. Is the ring affected by magnetic fields? No, the component is antimagnetic, so its dimensional reference remains unaffected by magnetic clamping or magnetic tooling in the immediate work area. How does the hardness rating influence longevity? The HV 1250 hardness contributes to surface durability under repeated contact, reducing wear and the frequency of replacement compared with softer reference parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Setting Ring Form C Hardened Gauge Steel DIN 2250/DIN 286 JS3, 0.6kg - Metav IndustryLine
Take advantage of a compact, DIN‑compliant setting gauge that pairs hardened, lapped gauge steel with a stable Form C geometry for reproducible setups and long service life; order directly via Metav Werkzeuge or contact our consultants for application advice. Setting Ring M313.050 — 50 mm setting ring, hardened and lapped (DIN 2250, Form C) by Metav IndustryLine The Setting Ring M313.050 is a precision gauge designed for reliable setting and verification of measuring instruments and fixtures in inspection and workshop environments. 50 mm nominal diameter Hardened and lapped gauge steel DIN 2250 / DIN 286 tolerance JS 3 Form C geometry for stable seating Reproducible setups with measurable benefits The ring's 50 mm nominal diameter and hardened and lapped finish deliver a consistent datum for repeated instrument settings and comparative checks. The lapping process produces a fine measuring surface that reduces local elastic deformation and improves repeatability when used as a reference. For production tasks where setup time and measurement drift affect throughput, a solid gauge ring translates directly into fewer rechecks and a steadier process flow. Robust construction tuned to workshop use Manufactured from gauge steel that has been hardened and lapped, the component resists wear in routine handling and remains dimensionally stable across common temperature ranges encountered in shop and inspection rooms. The Form C profile stabilises seating in holder and spindle applications, reducing tilt and ensuring the ring sits true during measurement operations. The modest mass and compact form make it simple to handle while providing the stiffness expected of a dedicated setting gauge. Standards, tolerances and application clarity Conforming to DIN 2250 and DIN 286 with a tolerance class of JS 3, the device provides a documented specification level suitable for workshop calibration and gauge setting duties. The combination of standard conformity and lapped surfaces facilitates integration into existing quality routines and inspection plans, enabling clear pass/fail criteria and easier traceability within inspection documentation. Where a precise datum is required for comparative checks, this ring functions as a reliable mechanical reference. Contact Metav Werkzeuge in Emmerich for procurement details and technical clarification about the Metav IndustryLine setting ring — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: M313.050 GTIN: 4054469120836 ECLASS: 21170104 Data Diameter: 50 mm Weight: 0.6 kg Tariff number: 90173000 Special features Material: gauge steel, hardened and lapped Standards: DIN 2250; DIN 286; tolerance JS 3 Geometry: Form C Category: gauges / setting rings SKU: M313.050 FAQ What material is the setting ring made from? The setting ring is produced from hardened and lapped gauge steel, offering wear resistance and stable dimensional properties. Which standards and tolerance class apply to this gauge? This gauge complies with DIN 2250 and DIN 286 and is manufactured to tolerance class JS 3. What nominal size and mass does the product have? The ring has a nominal diameter of 50 mm and a mass of 0.6 kg. What is the intended use of this setting ring? It is intended as a precision datum for setting, checking and comparative measurement tasks in inspection and workshop contexts where a stable mechanical reference is required. Does the ring suit fixture and spindle seating applications? Yes; the Form C geometry is chosen to ensure stable seating and to reduce the risk of rocking during use Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Test Pin 11.14mm Diameter Workshop Version, Special Steel - Metav IndustryLine
The combination of high precision and robust special steel construction ensures consistent measuring results and long service life; take advantage of the tight ±0.002 mm tolerance and compact 50 mm length for precise end‑measure inspections. Order the gauge pin directly via Metav Werkzeuge or ask the consultants for matching gauge sets. Gauge pin, single — 11.14 mm Ø, 50 mm length (Metav IndustryLine) A precision gauge pin designed for end‑measure checks and alignment in metrology and workshop applications. Workshop version, robust construction Diameter 11.14 mm, tight tolerance ±0.002 50 mm overall length for compact use Made from special hardened steel Accuracy that reduces rework and speeds inspection The gauge pin M323.B14 is made for measurable repeatability: with a declared accuracy of ±0.002 mm, this test pin provides the level of control required for fine inspection tasks and plug‑gauge comparisons. Such a tolerance helps to reduce rejects and rework by ensuring that mating bores and fixtures are verified against a stable reference. In practical terms, the close dimensional control improves process reliability during small‑batch runs and final checks, turning a simple manual test into a reproducible verification step for quality documentation. Durable construction for frequent workshop use Manufactured from special steel, this single gauge pin is specified as a workshop execution to withstand regular handling and routine use. The compact 50 mm length and single‑piece design make it easy to store and to include in portable inspection kits, while the solid material selection contributes to wear resistance across repeated insertions. Where surface finish and roundness are critical, the stable geometry of the pin supports consistent contact conditions, which in turn preserves measurement integrity over time and ensures reliable fit checks in assembly operations. Practical handling and system integration The compact dimensions—11.14 mm diameter and short overall length—make the pin particularly suitable for tight measuring spaces and end‑position checks in fixtures. Supplied as an individual test pin, it suits ad‑hoc inspections, replacement of worn pins in gauge sets, or expansion of existing plug‑gauge assortments. Backed by Metav IndustryLine’s focus on accessible precision, the component bridges workshop practicality with traceable quality: clear specification and consistent manufacturing mean fewer interruptions on the production floor and faster verification cycles. For tailored advice or to order the Metav IndustryLine gauge pin M323.B14, contact Metav Werkzeuge for rapid assistance and mutual selection of compatible gauge components Technical Data Article number: M323.B14 GTIN: 4061905064425 Brand: Metav IndustryLine Label: Gauge pin, single, 11.14 mm length 50 mm Facts Diameter: 11.14 mm Overall length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Supplied singly Material: Spezial‑Stahl FAQ What tolerance does the pin offer for dimensional checks? The declared tolerance for this gauge pin is ±0.002 mm, which makes the M323.B14 suitable for precise verification tasks where close dimensional control is required. Is the 11.14 mm diameter suitable for plug‑gauge comparisons? Yes. The 11.14 mm nominal diameter of the gauge pin is intended for end‑measure checks and can be used as a reference in plug‑gauge comparisons and fit verifications. Can this pin be used in assembly fixtures and jigs? The robust workshop design and compact 50 mm length permit use in fixtures and jigs for alignment and verification; the solid construction supports repeated handling in an industrial environment. Is the pin delivered as part of a set or individually? This item is supplied individually as a single test pin and is suitable for adding to existing gauge assortments or for replacement purposes. Which material is used for the gauge pin and what does it mean for wear? The pin is made from special steel, a specification chosen to provide stable geometry and resistance to routine wear during inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
52 mm Limit Go Gauge H7 DIN 2245, Hardened Gauge Steel, 1.8 kg - Metav IndustryLine
Take advantage of precise bore verification, robust hardened gauge steel and DIN‑compliant tolerances to reduce rework and keep production flowing. Order the limit gauge mandrel directly via Metav Werkzeuge or consult our specialists for integration into inspection routines. Limit gauge mandrel M314.052 — 52.0 mm H7 (Metav IndustryLine) A limit gauge mandrel (M314.052) for fast verification of 52.0 mm bores to DIN 2245 with H7 tolerance, intended for shop‑floor and QC use DIN 2245-compliant for bore inspection Hardened gauge steel for long service life 52.0 mm nominal diameter, H7 tolerance Reliable bore verification for consistent output The mandrel is designed to provide a clear go/no‑go assessment of cylindrical bores, enabling fast decisions in the production line. Conformity with DIN 2245 ensures dimensional interchangeability and repeatable checks against the H7 tolerance class at the 52.0 mm nominal size. By introducing a standardised acceptance criterion, this tool reduces subjective judgement and helps to lower scrap rates and downstream rework, supporting a measurable improvement in process reliability. Built for durability and sustained accuracy Manufactured from hardened gauge steel, the mandrel resists wear and maintains its form under frequent handling. The heat‑treated surface provides enhanced wear resistance, which translates into longer intervals between checks or replacements. Robust construction and a precise finish mean the gauge will preserve its measuring function in demanding environments, contributing to steady throughput and reduced maintenance interruptions for the inspection station. Simple integration into inspection and workflow The limit mandrel suits both bench checks and fixture‑mounted inspection points; its straightforward pass/fail application speeds up production control and final inspection steps. For traceable inspection routines, record results alongside batch data to create a reproducible quality record. If specification alignment or fixture adaptation is required, Metav Werkzeuge can advise on best practice for integrating the mandrel within existing measurement programmes and sampling plans. Contact Metav Werkzeuge for procurement and application advice on Metav IndustryLine limit gauge mandrels (M314.052) — expert guidance from Emmerich for seamless inspection setup Technical Data Article number: M314.052 GTIN: 4054469121758 Standard: DIN 2245 Material: hardened gauge steel Nominal diameter: 52.0 mm Tolerance class: H7 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts eClass: 21170218 SKU: M314.052 Special features Designed for bore inspection and limit checking Suitable for shop‑floor and quality control applications Robust finish for long service life Category: gauges / gauge pins FAQ What is the primary function of this mandrel? The limit gauge mandrel M314.052 (Metav IndustryLine) is intended for fast go/no‑go verification of 52.0 mm bores to the DIN 2245 standard and H7 tolerance class. Which material is used and why does it matter? The mandrel is made from hardened gauge steel; this material ensures dimensional stability and wear resistance, maintaining accuracy over many inspection cycles. Can the mandrel be used in a fixture or only by hand? The design supports both manual checks and fixture mounting, making the mandrel suitable for inline production checks as well as bench‑top quality control. How does the H7 tolerance relate to inspection? H7 defines the permissible bore tolerance band; the mandrel provides a clear acceptance criterion against that band, simplifying pass/fail decisions in the inspection process. Is a calibration certificate supplied with the product? The product data does not specify an accredited calibration certificate; any requirements for traceable calibration should be discussed with Metav Werkzeuge so the correct service or documentation can be provided. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
52 mm Setting Ring Form C Hardened Gauge Steel DIN 2250, DIN 286 JS3 - Metav IndustryLine
Take advantage of the combination of a 52 mm reference diameter, hardened, lapped gauge steel and DIN conformity for reliable, repeatable tool setting and inspection. Order this ring gauge directly via Metav Werkzeuge or consult our specialists for application advice. Setting ring 52 mm (DIN 2250) — hardened, lapped gauge steel | Metav IndustryLine The Setting ring 52 mm is a compact reference ring gauge for inspection and tool‑setting tasks, manufactured to DIN 2250 and DIN 286 with JS 3 tolerance for workshop and production use. Hardened, lapped gauge steel DIN 2250 & DIN 286, JS 3 Form C contact geometry Compact 52 mm reference diameter Repeatable reference for tool setting and inspection The ring serves as a stable reference standard, enabling reproducible settings and checks for fixtures, collets and measuring instruments. Made from hardened, lapped gauge steel, the component reduces surface deformation and contact variability, which translates into fewer set‑up iterations and shorter cycle times in the workshop. Compliance with established norms ensures results that integrate smoothly into quality procedures and inspection chains. Tolerances and what JS 3 means for quality control Built to DIN 2250 and DIN 286 with JS 3 tolerance, the ring provides a clearly defined allowance for play and fit. This class is suitable where consistent functional clearance and interchangeability are required, for example when setting go/no‑go references or verifying clamping devices. The precise geometry of the contact faces (Form C) supports accurate contact points and reduces measurement uncertainty during repetitive operations. Durability, finish and handling benefits The lapped finish improves surface contact uniformity and minimises abrasion during routine use, prolonging the service life of the gauge and the tools it interacts with. The choice of hardened gauge steel gives abrasion resistance and dimensional stability under normal workshop conditions, reducing the need for frequent rework or replacement. The compact form factor makes the ring easy to store and handle while preserving the physical integrity of the reference surface. Where this ring delivers tangible gains This reference ring is particularly valuable in toolrooms, production lines and inspection benches where quick, reliable setting and verification are essential. Use cases include setting jaw centres, verifying bore references, and routine dimensional checks in assembly and maintenance. The combination of standard conformity, robust material and compact diameter contributes to reduced downtime and more consistent quality output across batches. For procurement and specialist guidance on integrating the Metav IndustryLine setting ring M313.052 into production processes, contact Metav Werkzeuge for a tailored recommendation and supply from our Emmerich hub. Technical data Article number: M313.052 GTIN: 4054469120843 eClass: 21170104 Category path: Messgeräte > Lehren Facts Diameter: 52 mm Tariff code: 90173000 Special features Material: hardened and lapped gauge steel Standards: DIN 2250 and DIN 286 Tolerance class: JS 3 Contact geometry: Form C Category: Lehren / Messgeräte FAQ What is the intended use of this setting ring? The setting ring is intended as a reference gauge for tool setting, inspection and verification tasks; the Setting ring 52 mm by Metav IndustryLine is suited to workshop and production applications. Which standards does the ring conform to? The ring complies with DIN 2250 and DIN 286 and is manufactured to JS 3 tolerance, ensuring standardised clearance and interchangeability. Is the surface finish important for measurements? Yes — the lapped finish on the hardened gauge steel ensures uniform contact and reduced wear, improving repeatability during routine checks. Can this ring be used for setting collets and mandrels? Yes, the compact 52 mm reference diameter and Form C contact geometry make it suitable for setting and verifying collets, mandrels and similar clamping devices. What is the product code for ordering? Refer to article number M313.052 when ordering or enquiring about this setting ring. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
55mm Limit Plug Gauge DIN 2245 H7 Hardened Gauge Steel 1.9kg - Metav IndustryLine
Product data contains contradictions: the recorded weight entries differ (1.2 kg vs 1.9 kg) and the condition indicators are conflicting (both rejected and good). These discrepancies make it challenging to ensure accuracy and consistency in the final product description. It is essential to verify the source data thoroughly to identify the correct weight and condition of the product. Without resolving these issues, the resulting description may misrepresent the product, leading to potential confusion or errors. Please review the original data sources carefully and address these inconsistencies before proceeding with the creation of the product description.
55mm Setting Ring Form C, Hardened Gauge Steel, DIN 2250/DIN 286 JS3 - Metav IndustryLine
Take advantage of a compact, standard‑compliant reference that combines hardened and lapped gauge steel with the interchangeability of DIN 2250 / DIN 286; the 55 mm nominal size provides a stable master for setting internal measuring instruments. Order the setting ring directly via Metav Werkzeuge or consult our specialists for application advice. M313.055 Setting ring — 55 mm gauge ring, hardened and lapped (Metav IndustryLine) The M313.055 setting ring is a precision gauge ring for setting and verifying internal diameters in inspection and workshop environments, manufactured to DIN 2250 and DIN 286 with tolerance class JS 3. Setting ring Form C, nominal 55 mm Hardened and lapped gauge steel DIN 2250 / DIN 286, tolerance JS 3 For accurate setting and verification of bores Precision where reproducible references matter A compact reference of 55 mm nominal diameter, the M313.055 functions as a reliable master for internal gauge setting. Manufactured from hardened and lapped gauge steel, the ring offers a wear‑resistant contact surface that reduces local deformation and surface irregularities. Lapping yields a fine finish that helps stabilise the contact geometry between ring and probe, which in turn keeps measurement scatter low during repetitive setting tasks. The result is a practical reference that supports consistent adjustment of bore gauges, plug gauges and similar internal measuring tools. Standards that simplify quality processes Compliance with DIN 2250 and DIN 286 and the specified tolerance JS 3 ensures interchangeability across tools and fixtures. The JS 3 tolerance band denotes a closely controlled nominal fit for gauging purposes, which makes the ring suitable as a master for routine inspection and setup work. Using a standardised reference reduces the administrative effort of documenting gauge chains and facilitates traceable comparisons in quality control routines. These attributes contribute directly to reduced rework and clearer pass/fail criteria on production batches. Durable design for everyday metrology work Designed for workshop durability, the setting ring withstands frequent handling and repeated seating of probes without rapid wear, thanks to its hardened substrate and lapped finishing. Typical applications include setting internal micrometers, adjusting bore gauges and verifying dimensional fixtures in mechanical engineering and toolmaking. Handling recommendations: avoid sharp impacts, store the ring in a dry, dust‑free environment and protect the measuring surface from oils or abrasives. Combined with Metav IndustryLine’s quality screening, this ring is intended to deliver repeatable results for calibration benches and shop floor checks alike. For precise gauge setting, specify Metav IndustryLine setting rings via Metav Werkzeuge in Emmerich — technical consultants are available to advise on integration into inspection routines Technical data Article number: M313.055 GTIN: 4054469120850 Material: Gauge steel, hardened and lapped Form: Form C Nominal diameter: 55 mm Facts eClass: 21170104 Tariff number: 90173000 Standards: DIN 2250; DIN 286; JS 3 Special features Application: Setting and verification of internal diameters Category: Gauge pins; Gauges Feature: Precision lapped contact surface FAQ What is the primary use of this setting ring? The M313.055 setting ring from Metav IndustryLine is designed as a precision reference for setting and verifying internal measuring instruments such as bore gauges and plug gauges. What does Form C indicate for this ring? Form C describes the geometric finish and intended seating style of the ring; Form C rings offer a standard internal form suitable for practical setting tasks with typical shop probes. What tolerance level does JS 3 represent? JS 3 signifies a narrow tolerance band around the nominal diameter intended for gauging use; the designation on the M313.055 confirms suitability as a repeatable master in quality control processes. Which measuring tools can be set with the 55 mm ring? Typical instruments include internal micrometers, dial bore gauges, and plug gauges—any probe or device requiring a stable 55 mm internal reference benefits from the M313.055 gauge ring. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
55° Whitworth Thread Setting Gauge Steel - Metav IndustryLine
Precision through hardened steel and the established Whitworth 55° geometry ensures reliable go/no‑go verification and low wear in repetitive checking. Benefit from compact portability and simple integration into inspection routines — order directly via Metav Werkzeuge or consult our specialists for application advice. Whitworth 55° pointed thread steel gauge — hardened steel inspection gauge (Metav IndustryLine) The Whitworth 55° pointed thread steel gauge is a compact inspection tool for rapid verification of Whitworth V‑threads in workshop and production environments, designed for routine go/no‑go checks and quick quality decisions Hardened steel construction for wear resistance Whitworth 55° V‑thread profile for standard checks Efficient go/no‑go verification for production Compact and portable at 0.13 kg Ensure repeatable thread conformity with every check For production environments where thread conformity must be demonstrable, this thread gauge provides a straightforward, repeatable measure. The 55° V‑profile matches the Whitworth standard and allows immediate go/no‑go assessment, reducing time spent on individual measurements and lowering the risk of scrap or rework. By offering a simple verification step at the bench or on the shop floor, the gauge supports consistent output and smoother process control. The compact format is particularly useful where space and handling speed are priorities, enabling faster throughput without compromising inspection reliability. Durable steel design reduces lifecycle costs Constructed from robust steel, the gauge resists wear in repetitive contact situations and maintains its profile over many inspection cycles, which helps preserve measurement quality over time. Its low mass makes it easy to handle and store while the solid material provides the stiffness required for accurate contact. Minimal maintenance is needed beyond routine cleaning to remove chips and lubricants; this keeps downtime low and life‑cycle costs down. The combination of durability and straightforward care supports continuous use in busy production and metrology workbenches. Quick integration into quality workflows and documentation The gauge is intended for direct use in shop‑floor quality routines and can be incorporated into visual inspection stations or paired with simple procedural checklists for process control. As a tactile verification tool, it complements dimensional measuring equipment by providing a rapid pass/fail decision that is easy to document in quality records. For customers seeking to standardise thread checks across workstations, the gauge is a pragmatic choice: no complex setup is required and training is minimal, so technicians can adopt it quickly and maintain consistent inspection standards. Contact Metav Werkzeuge for tailored application advice or to request the Metav IndustryLine Whitworth 55° gauge (M318.054) directly from our Emmerich depot Technical data SKU: M318.054 GTIN: 4054469181929 Manufacturer: Metav IndustryLine Material: Steel Weight: 0.13 kg Numbers Thread angle: 55° Mass: 0.13 kg GTIN numeric: 4054469181929 Special features Pointed V‑thread (Whitworth) profile Suitable for Whitworth 55° threads Category: Gauges Compact, portable design FAQ Which thread form does this gauge check? The gauge verifies Whitworth V‑threads with a 55° profile and is intended for go/no‑go confirmation of that standard. What is the gauge made from? The inspection tool is manufactured from steel to provide durability and consistent contact geometry during repetitive checks. Is the gauge suitable for routine production checks? Yes, the design supports rapid pass/fail verification on the shop floor and can be integrated into standard inspection routines. How should the gauge be cared for? Keep the gauge clean and free of chips or lubricant residues; periodic inspection of the profile ensures continued suitability for go/no‑go checks. What is the product identifier for ordering? The article is listed as M318.054 (GTIN 4054469181929) and is part of the Metav IndustryLine range Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fast, tactile checks where electronics are impractical
Gauges and test pins provide unequivocal go/no-go results for threads, bores, gaps and radii without relying on electronics. The range covers plug gauges and ring gauges for internal and external threads, feeler gauges and precision feeler strips for micro‑gap assessment, plus probe pins and measuring pins for tactile diameter and pitch checks.
How these tools work in the production environment
Mechanical gauges operate as direct reference standards: a plug gauge or ring gauge verifies conformity to thread profiles and mating ability, while limit gauges separate accept from reject in a single step. Test pins are used to tactilely measure small bore diameters, centre‑to‑centre distances and radii. Manufactured from hardened gauge steel or ceramic and often precision lapped, these instruments deliver immediate physical results that are ideal for incoming inspection, machine‑side checks and final control.
Measurable benefits that affect production performance
- Reduced scrap and rework through rapid, unambiguous pass/fail assessment.
- Increased repeatability thanks to very low measurement uncertainty and fine lapping.
- Lower downtime: quick checks at the machine save cycle time and reduce setup periods.
- Durable construction with high wear resistance from specialised, low‑distortion alloys.
- Versatile delivery formats: individual gauges, organised sets in wooden cases or metre‑length feeler rolls compliant with DIN 2269.
Why Metav is the practical choice for precision supplies
Metav combines decades of expertise with a broad warehouse and quality filtering from Emmerich. As a precision partner for industry, craft and trade, Metav supplies a comprehensive selection of gauges and test pins alongside complementary tools such as precision calipers and setting rings. With over 48,000 customers and a catalogue exceeding 250,000 items, Metav is positioned to supply reliably, reduce vendor complexity and support traceable quality control to national standards.
Summary
Gauges and test pins are indispensable for dependable, repeatable quality assurance where tactile, mechanical verification is preferred. Choose these plug gauges, ring gauges, feeler strips and probe pins when immediate, robust measurement decisions are required on the shop floor.
FAQ
What materials are gauges and test pins typically made from?
Gauges and test pins are usually manufactured from hardened gauge steel for durability and wear resistance; ceramic variants are available where thermal stability and minimal wear are critical.
How do thread gauges ensure mating capability?
Thread plug gauges and ring gauges check flank diameters and thread form against standards, providing a clear go/no‑go verdict that confirms pairability with mating parts.
Which tolerance class should I choose for probe pins and gauge sets?
Select tolerance classes aligned with your inspection requirements; for high‑precision tasks, sets produced to DIN 2269 or equivalent tolerance classes ensure micrometre‑level control and repeatability.
Can feeler gauges measure contact gaps in valve and engine work reliably?
Yes. Feeler gauges and precision feeler strips, supplied either as a fan or metre‑length rolls, allow accurate assessment of valve clearances and contact gaps down to micrometre increments.
How do limit gauges speed up in‑process inspection?
Limit gauges separate good from bad in a single, tactile operation, enabling rapid go/no‑go checks at the machine and reducing both inspection time and the likelihood of human interpretation errors.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com