Milling & Turning
Comprehensive Technical Specifications: Order Number: U20TM Item: Indexable Drill usable with XCMT 060204 Indexable Inserts of Korloy Brand: Teknik Makina Structural Details: Diameter: 12mm Weight: 0.114kg Total length: 94mm Diameter Connection: 16mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Specifications: Order Number: VT221TM Item: Modular End Mill usable with APMT 0603 Indexable Inserts of Korloy Brand: Teknik Makina Metric Information: Diameter: 12mm Cutting Edges: 3 Weight: 0.02kg Total length: 40mm Thread: M6 Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Klemmhalter (Turning Holder) by Teknik Makina Klemmhalter is a precision Turning Holder for DCMT 0702 indexable inserts, engineered for left-hand cutting and stable toolholding in turning applications. Klemmhalter SDJCL 1212 for DCMT 0702 inserts Left-hand cutting direction, precision alignment Overall length 125 mm for stable tool support Compact 12 mm shank width with 16 mm head Secure clamping with Torx T8 screw M2.5x5.5 Precision clamping for consistent turning results The Klemmhalter (Turning Holder) SDJCL 1212 is designed to deliver precision and repeatability when used with DCMT 0702 indexable inserts. Its clamp-style design ensures a constant seating force on the insert, which reduces micro-movements during cutting and supports uniform chip formation. As a result, tool life and surface finish benefit directly from improved insert stability, making the holder suitable for serial production tasks where repeatable results matter. Optimised for left-hand cuts and reliable alignment Built specifically for left-hand cutting, the holder’s geometry sets the insert at the correct rake and clearance angles to minimise chatter and facilitate predictable chip flow. The specified cutting angle of 93° supports controlled engagement with the workpiece, so operators can expect steady cutting behaviour in shoulder and facing operations. This targeted design simplifies setup and reduces time spent on alignment during tool changes. Compact dimensions that increase rigidity With an Overall Length of 125 mm and a shank width of 12 mm, the holder combines a compact footprint with a 16 mm cutting head width, delivering high rigidity in confined toolpost spaces. The cutting height of 15 mm ensures the insert sits at the correct centreline for many standard lathes. Thanks to this balance of size and stiffness, vibration is minimised and productivity can be raised without compromising component quality. Simple maintenance and broad compatibility Maintenance is straightforward: the clamping screw uses a Torx T8, and the supplied screw specification M2.5x5.5 guarantees consistent torque and easy replacement. Compatibility with DCMT 0702 indexable inserts makes the holder a flexible choice for workshops that use standard carbide inserts. If further technical clarification or selection support is required, METAV Werkzeuge provides competent advice to ensure the holder meets specific machining demands. For reliable left-hand turning operations, we recommend Teknik Makina’s Turning Holder — for specialist advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271). Bezeichnung: Klemmhalter Marke: Teknik Makina SKU: D360-1TM Type: SDJC for DCMT Indexable Inserts Compatible Inserts: DCMT 0702 Klemmhalter Bezeichnung ISO: SDJCL 1212 Shank Width: 12 mm Overall Height: 12 mm Cutting Head Width: 16 mm Overall Length: 125 mm Cutting Height: 15 mm Cutting Direction: left Cutting Angle: 93° Torx Key: T8 Torx Screw: M2.5x5.5 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Klemmhalter Turning Holder by Teknik Makina? The Klemmhalter Turning Holder from Teknik Makina is compatible with DCMT 0702 indexable inserts; this pairing ensures correct seating and reliable chip control for typical turning tasks. Is the Klemmhalter suitable for right-hand cutting? The Klemmhalter (Turning Holder) by Teknik Makina is specified for left-hand cutting; for right-hand operations, a dedicated right-hand holder should be selected to match the required cutting direction. How is the Klemmhalter clamped and maintained? Clamping is performed with a Torx screw (use a T8 key) specified as M2.5x5.5; Teknik Makina’s Klemmhalter design allows straightforward replacement of fasteners and easy torque control for consistent performance. Can METAV Werkzeuge assist with selecting the correct holder? Yes—METAV Werkzeuge offers expert consultation for matching the Klemmhalter Turning Holder by Teknik Makina to your machine and inserts; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D360-1TM","sku":"D360-1TM","mpn":"D360-1TM","name":"SDJC for DCMT Indexable Inserts Turning Holder, Left Cut, 125mm, 12mm Height - Teknik Makina","description":"Turning holder for DCMT 0702 indexable inserts; 125mm overall length, 12mm height, left cutting direction, T8 torx, M2.5x5.5 screw.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/9f/13/35/64/6435139f4fcfb37a48907531/d360tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d0/7e/de/62/62de7ed00f56dbb4de4dbf3f/d360tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2d/7e/de/62/62de7e2d148ec6b71020ff7a/d360tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Suitable Inserts","value":"DCMT 0702"},{"@type":"PropertyValue","name":"Overall length","value":"125 mm"},{"@type":"PropertyValue","name":"Overall height","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting head width","value":"16 mm"},{"@type":"PropertyValue","name":"Cutting height","value":"15 mm"},{"@type":"PropertyValue","name":"Cutting direction","value":"left"},{"@type":"PropertyValue","name":"Torque key","value":"T8"},{"@type":"PropertyValue","name":"Torx screw","value":"M2.5x5.5"},{"@type":"PropertyValue","name":"Weight","value":"0.13 kg"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Designed for DCMT 0702 indexable inserts."}},{"@type":"Question","name":"What are the dimensions of the holder?","acceptedAnswer":{"@type":"Answer","text":"Overall length 125 mm, overall height 12 mm, cutting head width 16 mm, cutting height 15 mm."}},{"@type":"Question","name":"What is the cutting direction?","acceptedAnswer":{"@type":"Answer","text":"Left cutting direction."}},{"@type":"Question","name":"Which torx key and screw are used?","acceptedAnswer":{"@type":"Answer","text":"Torx key T8 and torx screw M2.5x5.5."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"SDJC for DCMT Indexable Inserts"},{"@type":"Thing","name":"Left Cut Toolholders"}],"mentions":[{"@type":"Thing","name":"T8 Torx Key"},{"@type":"Thing","name":"M2.5x5.5 Torx Screw"},{"@type":"Thing","name":"DCMT 0702 Inserts"}]}]}
Clamping Holder SDJC for DCMT Indexable Inserts (Turning Holder) by Teknik Makina Clamping Holder SDJC for DCMT Indexable Inserts is a compact turning holder designed for secure fastening of indexable inserts in precision turning applications. Clamping Holder SDJC for DCMT Indexable Inserts Internal Cooling for improved Tool Life Compact 110 mm overall length for tight setups 12 x 12 mm clamp dimensions for stable mounting Compatible with DCMT 11T3 indexable inserts Deliver Consistent Cutting Performance and Precision Engineered for demanding turning tasks, the holder delivers right-hand cutting with a 93° Cutting Angle that helps maintain stable cutting forces and predictable chip flow. The robust clamp geometry reduces vibration and contributes to repeatable results across workpieces. This design translates directly into better surface finish and dimensional accuracy, making the tool suitable for production environments where consistency is essential. Reliable Compatibility and Fast Insert Changes The tool is compatible with DCMT 11T3 indexable inserts and uses the SDJCR 1212 clamping interface for rapid and secure insert seating. Indexable inserts allow quick index or replacement without regrinding, which reduces downtime and lowers operating costs. For users unfamiliar with indexable systems: these are carbide cutting tips that are mounted on the holder and can be rotated or swapped when one edge wears, restoring cutting performance in seconds. Efficient Cooling and Compact Design for Tight Setups Built-in Internal Cooling delivers coolant directly to the cutting edge, improving tool life and aiding chip control under heavy loads. The holder’s compact footprint — 110 mm overall length with 12 mm body width and height and a 16 mm cutting head width — makes it ideal for machines with limited overhang or for multi-op setups. The compact dimensions support rigid clamping, which is crucial for reducing chatter and extending insert life. Simple Mounting, Maintenance, and Application Scope Installation and maintenance are straightforward: mounting uses a Torx T15 for the clamp screw (M3.5x11) and the U-plate model TA030 with an M5 fixing screw. The holder is intended for machinists and workshops performing general turning and finishing operations where fast insert changes and coolant delivery are required. For tailored setups or integration into existing tool assemblies, technical advice is available from the retailer. Choose Teknik Makina’s Clamping Holder SDJC for DCMT Indexable Inserts when precision, quick insert changes and reliable coolant delivery matter — for application questions or setup assistance contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp: +49 170 2837271). Clamping Holder SDJC for DCMT Indexable Inserts Brand: Teknik Makina SKU: AP509TM Product Type: Turning Holder Compatible Inserts: DCMT 11T3 Clamp Designation (ISO): SDJCR 1212 Clamp Width: 12 mm Clamp Height: 12 mm Cutting Head Width: 16 mm Overall Length: 110 mm Overall Height: 12 mm Cutting Height: 32 mm Cutting Direction: Right Cutting Angle: 93° Internal Cooling: Yes Torx Key: T15 Torx Screw: M3.5x11 U-Plate: TA030 U-Plate Screw: M5 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Clamping Holder SDJC for DCMT Indexable Inserts by Teknik Makina? The Clamping Holder SDJC for DCMT Indexable Inserts by Teknik Makina is designed to accept DCMT 11T3 indexable inserts; this compatibility ensures secure seating and straightforward insert changes for turning and finishing tasks. Does the turning holder provide coolant through the tool? Yes, the turning holder features Internal Cooling, which supplies coolant toward the cutting edge to improve tool life and chip control during machining operations. Which fasteners are required to mount the holder? Mounting the holder uses a Torx T15 for the clamp screw (M3.5x11) and the U-plate TA030 secured with an M5 screw; these details apply to the Clamping Holder SDJC for DCMT Indexable Inserts and help ensure correct installation. Who can assist if I need technical advice for setup or application? For application-specific questions or additional technical data about the Clamping Holder SDJC for DCMT Indexable Inserts from Teknik Makina, contact METAV Werkzeuge for expert guidance at info@metav-werkzeuge.com or by phone at +49 2822 7131930. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#AP509TM","sku":"AP509TM","mpn":"AP509TM","gtin13":"","name":"Turning Holder SDJC For DCMT Indexable Inserts, 12mm, 110mm - Teknik Makina","description":"SDJC turning holder for DCMT 11T3 indexable inserts with internal coolant, right-hand, 12mm width, 110mm overall length; robust ISO SDJCR 1212 design.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/0a/8d/e2/62/62e28d0a4355de0a51335f55/ap510tm-main.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Insert Type","value":"DCMT 11T3"},{"@type":"PropertyValue","name":"Overall Length","value":"110 mm"},{"@type":"PropertyValue","name":"Shank Width","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting Direction","value":"Right-hand"},{"@type":"PropertyValue","name":"Internal Coolant","value":"Yes"},{"@type":"PropertyValue","name":"ISO Designation","value":"SDJCR 1212"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"16 mm"},{"@type":"PropertyValue","name":"Cutting Height","value":"32 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.11 kg"},{"@type":"PropertyValue","name":"Torx Key","value":"T15"},{"@type":"PropertyValue","name":"Torx Screw","value":"M3,5x11"},{"@type":"PropertyValue","name":"Clamp Plate","value":"TA030"},{"@type":"PropertyValue","name":"Clamp Plate Screw","value":"M5"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What insert does this holder accept?","acceptedAnswer":{"@type":"Answer","text":"Designed for DCMT 11T3 indexable inserts."}},{"@type":"Question","name":"Is internal coolant supported?","acceptedAnswer":{"@type":"Answer","text":"Yes, the holder features internal coolant."}},{"@type":"Question","name":"What are the main dimensions?","acceptedAnswer":{"@type":"Answer","text":"Shank width 12 mm, overall length 110 mm, cutting head width 16 mm."}},{"@type":"Question","name":"Which cutting direction is this holder for?","acceptedAnswer":{"@type":"Answer","text":"Right-hand cutting direction."}},{"@type":"Question","name":"What is the ISO designation of the holder?","acceptedAnswer":{"@type":"Answer","text":"ISO designation SDJCR 1212."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/turning-holder-sdjc-ap509tm","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder SDJC Series"},{"@type":"Thing","name":"Indexable Insert Holders"},{"@type":"Thing","name":"Internal Coolant Holders"}],"mentions":[{"@type":"Thing","name":"DCMT 11T3 Inserts"},{"@type":"Thing","name":"SDJCR 1212 ISO Designation"},{"@type":"Thing","name":"TA030 Clamp Plate"},{"@type":"Thing","name":"T15 Torx Key"}]}]}
Turning Holder (Klemmhalter) — SDJC for DCMT Indexable Inserts by Teknik Makina The Turning Holder (Klemmhalter) is an SDJC clamping tool designed for precision turning with DCMT 0702 indexable inserts, suitable for workshop and light production turning tasks. For DCMT 0702 indexable inserts Compact build with 125 mm overall length Compatible with SDJCR 1212 clamping standard Right-hand cutting direction for standard lathe setups Torx T8 fastening and M2.5x5.5 screw for secure clamping Secure clamping for consistent Turning performance The Turning Holder delivers dependable clamping through a compact SDJCR 1212 design that secures DCMT inserts with minimal vibration. The engineered contact surfaces reduce Micro-Movement at the insert seat, which improves Surface Finish and extends Insert Life. For operators this means fewer tool changes and more consistent part accuracy during medium-duty turning operations. Fast setup and clear compatibility with DCMT 0702 inserts Designed specifically for DCMT 0702 indexable inserts, the holder streamlines tool preparation: the clamping geometry and the supplied Torx interface enable repeatable seating and quick insert swaps. With an Overall Length of 125 mm and a Cutting Head Width of 16 mm, the tool is easy to position in standard tool posts. This reduces setup time and supports predictable cutting behavior on conventional lathes. Built for workshop use and diverse turning tasks This clamping solution targets machinists and maintenance shops seeking a reliable, compact holder for general turning. The moderate Cutting Height of 15 mm and Holder Width of 12 mm make the device suitable for a range of steel and non-ferrous machining jobs where stiffness and predictable chip flow matter. Users benefit from a balance of accessibility and rigidity without needing specialized toolholders. Simple maintenance and secure fastening Routine service is straightforward: check clamping screw torque and clean seating surfaces to preserve repeatable accuracy. The holder uses a Torx T8 key and an M2.5x5.5 screw for secure fixation; replacing Inserts or re-clamping requires only basic hand tools. Proper cleaning and inspection help maintain Cutting Performance and prevent premature wear of both holder and inserts. For precision turning tasks choose the Teknik Makina Turning Holder for reliable clamping with DCMT 0702 inserts — for tailored technical advice and order support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Technical Specifications Bezeichnung: Turning Holder (Klemmhalter) Marke: Teknik Makina SKU: D220-1TM Compatible Inserts: DCMT 0702 Holder ISO Designation: SDJCR 1212 Holder Shank Designation: K07 Overall Length: 125 mm Overall Height: 12 mm Holder Width: 12 mm Cutting Head Width: 16 mm Cutting Height: 15 mm Cutting Direction: Right Cutting Angle: 93° Torx Key: T8 Torx Screw: M2.5x5.5 Weight: 0.13 kg ECLASS: 21181004 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is compatible with DCMT 0702 indexable inserts; this pairing ensures the correct seating geometry and reliable clamping for standard turning operations. Is the SDJC for DCMT Indexable Inserts suitable for right-hand cutting only? Yes, the SDJC holder provided by Teknik Makina is specified for right-hand cutting, so the Turning Holder is intended for conventional right-hand lathe setups. Which tools are needed to change inserts on the Turning Holder? Changing inserts on the Turning Holder (Klemmhalter) requires a Torx T8 key to fasten or remove the M2.5x5.5 screw; basic hand tools suffice for quick and secure insert swaps. Where can I get support if the Turning Holder does not meet my technical needs? If the Turning Holder by Teknik Makina requires further technical clarification, METAV Werkzeuge offers expert consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised assistance. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D220-1TM","sku":"D220-1TM","mpn":"D220-1TM","gtin13":"","name":"12mm SDJC for DCMT Indexable Inserts, Right-Hand, 125mm Overall Length - Teknik Makina","description":"SDJC turning holder for DCMT 0702 indexable inserts; 12mm width/height, 125mm overall length, right-hand, aluminium alloy; precise clamping and robust design.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/15/14/35/64/64351415e3692e16d2a37e9e/d220tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/2d/7e/de/62/62de7e2d33927e49dbf32731/d220tm-artikelliste.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/d0/7e/de/62/62de7ed00aced56449540ec0/d220tm-technische-zeichnung.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Suitable Inserts","value":"DCMT 0702"},{"@type":"PropertyValue","name":"Overall Length","value":"125 mm"},{"@type":"PropertyValue","name":"Shank Width","value":"12 mm"},{"@type":"PropertyValue","name":"Shank Height","value":"12 mm"},{"@type":"PropertyValue","name":"Cutting Head Width","value":"16 mm"},{"@type":"PropertyValue","name":"Cutting Height","value":"15 mm"},{"@type":"PropertyValue","name":"Direction","value":"Right-hand"},{"@type":"PropertyValue","name":"Angle","value":"93°"},{"@type":"PropertyValue","name":"Weight","value":"0.13 kg"},{"@type":"PropertyValue","name":"Torx Key","value":"T8"},{"@type":"PropertyValue","name":"Torx Screw","value":"M2.5x5.5"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Which inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"Designed for DCMT 0702 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 125 mm."}},{"@type":"Question","name":"What are the shank dimensions?","acceptedAnswer":{"@type":"Answer","text":"Shank width and height are 12 mm."}},{"@type":"Question","name":"Is this a right-hand or left-hand holder?","acceptedAnswer":{"@type":"Answer","text":"This is a right-hand holder."}},{"@type":"Question","name":"What is the cutting height?","acceptedAnswer":{"@type":"Answer","text":"Cutting height is 15 mm."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/d220-1tm","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"Allround Clamping"},{"@type":"Thing","name":"Teknik Makina Tooling"}],"mentions":[{"@type":"Thing","name":"DCMT 0702 Inserts"},{"@type":"Thing","name":"SDJCR 1212 ISO Design"},{"@type":"Thing","name":"Recommended Shank K07"}]}]}
Turning Holder SDJC for DCMT Indexable Inserts by Teknik Makina Turning Holder SDJC for DCMT Indexable Inserts is a right-hand clamping tool designed for secure turning with DCMT 0702 indexable inserts, offering internal coolant and a compact form for confined toolposts. SDJC for DCMT indexable inserts Internal Coolant for improved chip control Right-hand tool with 93° cutting angle Compact 125 mm overall length for tight setups Quick clamping via Torx T8 and M2.5x5.5 fastening Precise Material Removal with Reliable Geometry Engineered for consistent chip formation, this Turning Holder accepts DCMT 0702 inserts and uses a 93° cutting angle that stabilises the cutting edge during interrupted cuts. The result is improved surface finish and predictable tool life. By matching holder geometry to the insert type, users benefit from repeatable performance and reduced setup adjustments, which is particularly valuable in batch production and tight-tolerance turning operations. Internal Coolant for Cooler Cutting Zones The integrated Internal Coolant channel directs cutting fluid close to the insert, lowering temperatures at the cutting zone and enhancing chip evacuation. This targeted cooling helps maintain cutting-edge integrity and can reduce thermal wear on both insert and holder. For shops machining stainless steels or high-temperature alloys, the coolant provision supports longer insert life and fewer unplanned tool changes. Compact Footprint for Small Toolholders and Fixtures With an Overall Length of 125 mm and a shank dimension of 12 × 12 mm, the holder fits compact toolposts and reduced-clearance setups without sacrificing rigidity. The 16 mm cutting-head width and 27 mm cutting height provide a stable platform for the insert while keeping the assembly compact. This design is advantageous in multi-station turrets and live-tool applications where space is at a premium. Fast, Secure Clamping and Easy Maintenance Assembly uses a Torx T8 key and M2.5x5.5 screw for the insert clamp, enabling rapid insert changes and reliable fixation. The ISO designation SDJCR 1212 indicates standardised mounting that simplifies tool inventory and replacement. Quick, tool-free changeovers reduce downtime and keep machines productive, especially in high-mix, low-volume environments. Who benefits from this holder This holder is aimed at professional machinists and production workshops that require a compact, coolant-fed solution for turning with DCMT inserts. It is especially suited for those working on small to medium turned components in steels and non-ferrous alloys who prioritise repeatability and low setup times. If process optimisation or insert selection is needed, METAV Werkzeuge offers expert consultation and technical support. For tailored advice or to order Teknik Makina’s Turning Holder SDJC for DCMT Indexable Inserts, contact METAV Werkzeuge for competent consultation via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 — expert support is available to ensure the tool meets your machining requirements. Technical Specifications Bezeichnung: Turning Holder (Klemmhalter) Marke: Teknik Makina SKU: AP560TM Type Designation: SDJCR 1212 Compatible Inserts: DCMT 0702 Overall Length: 125 mm Shank Width: 12 mm Shank Height: 12 mm Cutting Head Width: 16 mm Cutting Height: 27 mm Cutting Direction: Right Cutting Angle: 93° Internal Coolant: Yes Torx Key: T8 Torx Screw: M2.5x5.5 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder SDJC for DCMT Indexable Inserts by Teknik Makina? The Turning Holder SDJC for DCMT Indexable Inserts from Teknik Makina is designed to accept DCMT 0702 indexable inserts, ensuring correct seating and reliable cutting performance when combined with the specified insert geometry. Does the Teknik Makina Turning Holder offer coolant feed? Yes, the Teknik Makina Turning Holder SDJC for DCMT Indexable Inserts features internal coolant supply, which delivers cutting fluid directly to the cutting zone to aid chip evacuation and reduce thermal stress. How is the insert secured on the Turning Holder from Teknik Makina? Insert clamping for the Teknik Makina Turning Holder SDJC for DCMT Indexable Inserts uses a Torx T8 key and an M2.5x5.5 screw, allowing secure fixation and straightforward insert replacement. Is this holder suitable for confined toolposts? The compact 125 mm overall length and 12 × 12 mm shank of the Turning Holder SDJC for DCMT Indexable Inserts by Teknik Makina make it well suited for tight fixtures and small turrets where space is limited. Need help choosing the right configuration for your application? If you are unsure whether the Turning Holder SDJC for DCMT Indexable Inserts by Teknik Makina meets your requirements, METAV Werkzeuge provides comprehensive advice — contact eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271. 12mm SDJC Turning Holder for DCMT 0702, Internal Coolant, Right-Hand - Teknik Makina
Turning Holder SDJC for DCMT Indexable Inserts by Teknik Makina The Turning Holder SDJC for DCMT Indexable Inserts is a compact clamping tool designed for precision left-hand turning operations with integrated coolant for improved chip control. Turning Holder SDJCL 1212 compatible with DCMT 11T3 Internal Coolant for reliable chip evacuation Left-hand cutting direction for dedicated turning tasks Compact 110 mm Overall Length for tight setups Torx T15 interface and secure clamping hardware Precision Clamping for Consistent Turning Results The SDJCL 1212 clamping geometry ensures stable tool engagement with DCMT 11T3 indexable inserts, reducing vibration and improving Surface Finish. This stability translates directly into more predictable Cutting Forces and longer Insert Life, so setups run with fewer interrupts for rework. For users who need repeatable turning quality, the combination of a well-defined clamp seat and the ISO-compatible designation gives clear retrofit and replacement advantages. Integrated Coolant for Better Tool Life and Chip Control With Internal Coolant delivered through the holder, coolant reaches the cutting edge more effectively than external application alone, supporting thermal management and Chip Evacuation. For machinists unfamiliar with internal coolant, this means lower Cutting Temperatures at the Insert, reduced Built-Up Edge risk and generally longer Insert Lifetime. The result is fewer tool changes and more consistent component tolerances during longer cycles. Compact Form Factor Optimised for Left-hand Turning This tool’s 110 mm Overall Length, 12 mm Width and 12 mm Height allow use in constrained toolposts and on machines where workspace is limited. Designed for Left-hand cutting direction and a 93° approach angle, the holder is suitable for specific turning setups where directionality and clearance are decisive. The 16 mm cutting head width and 32 mm cutting height provide the geometry needed for precise engagement without excessive overhang. Workshop-ready Fastening and ISO Compatibility Assembly and maintenance are straightforward thanks to the Torx T15 interface and M3.5x11 clamp screw specification, together with the U-Plate TA030 and M5 U-plate screw standard. These conventional fastening elements simplify replacement and torque control during setup. Supplied as an ISO-designated SDJCL 1212 component, the holder integrates easily into existing tool inventories and supports efficient workshop logistics. We recommend Teknik Makina’s Turning Holder SDJC for precision left-hand turning — for tailored advice and technical support contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271 Bezeichnung: Klemmhalter Brand: Teknik Makina SKU: AP514TM Designation (Secondary): SDJC for DCMT Indexable Inserts English Name: Turning Holder Compatible Inserts: DCMT 11T3 ISO Designation: SDJCL 1212 Internal Coolant: Yes Cutting Direction: Left Approach Angle: 93° Overall Length: 110 mm Overall Height: 12 mm Holder Width: 12 mm Cutting Head Width: 16 mm Cutting Height: 32 mm Torx Key: T15 Clamp Screw: M3.5x11 U-Plate: TA030 U-Plate Screw: M5 Weight: 0.11 kg Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkiye, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder SDJC from Teknik Makina? The Turning Holder SDJC from Teknik Makina is designed to accept DCMT 11T3 indexable inserts and the SDJCL 1212 seating ensures correct alignment and secure clamping for those inserts. Does the Turning Holder SDJC include internal coolant capability? Yes, the Turning Holder SDJC by Teknik Makina features internal coolant, which delivers cooling directly to the cutting zone to support chip evacuation and extend insert life. Is the Turning Holder SDJC suitable for right-hand turning? The Turning Holder SDJC from Teknik Makina is specified for left-hand cutting direction; for right-hand operations a corresponding right-hand holder should be selected. How is the Turning Holder SDJC fastened and serviced in the workshop? Assembly uses a Torx T15 interface and an M3.5x11 clamp screw together with the TA030 U-Plate and M5 screw, making maintenance and torque control straightforward for workshop personnel. Who can I contact for technical advice about the Turning Holder SDJC? For detailed application support or compatibility checks, contact METAV Werkzeuge — they offer competent advice and can assist with technical questions at info@metav-werkzeuge.com or +49 2822 7131930. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#AP514TM","sku":"AP514TM","mpn":"AP514TM","name":"12mm SDJCL Turning Holder SDJC for DCMT Indexable Inserts, Left, Internal Coolant - Teknik Makina","description":"12mm SDJCL turning holder for SDJC using DCMT 11T3 indexable inserts; left-hand cutting, internal coolant, aluminium-compatible design; 110mm length, 12mm height.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/09/8d/e2/62/62e28d0933927e49dbf377ea/ap515tm-main.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"Total height","value":"12 mm"},{"@type":"PropertyValue","name":"Overall length","value":"110 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.11 kg"},{"@type":"PropertyValue","name":"Suitable inserts","value":"DCMT 11T3"},{"@type":"PropertyValue","name":"Cutting direction","value":"Left"},{"@type":"PropertyValue","name":"Cutting angle","value":"93°"},{"@type":"PropertyValue","name":"Insert pocket","value":"DCMT"},{"@type":"PropertyValue","name":"Internal coolant","value":"Yes"},{"@type":"PropertyValue","name":"Torx key","value":"T15"},{"@type":"PropertyValue","name":"Torx screw","value":"M3.5x11"},{"@type":"PropertyValue","name":"U-plate","value":"TA030"},{"@type":"PropertyValue","name":"U-plate screw","value":"M5"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What insert type fits this holder?","acceptedAnswer":{"@type":"Answer","text":"Designed for DCMT 11T3 indexable inserts."}},{"@type":"Question","name":"Is the holder suitable for internal coolant?","acceptedAnswer":{"@type":"Answer","text":"Yes, the holder features internal coolant."}},{"@type":"Question","name":"Which cutting direction does it support?","acceptedAnswer":{"@type":"Answer","text":"Left-hand cutting direction."}},{"@type":"Question","name":"What are the dimensions of the holder?","acceptedAnswer":{"@type":"Answer","text":"12 mm height and 110 mm overall length."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/12mm-sdjcl-turning-holder-ap514tm","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Turning Holder"},{"@type":"Thing","name":"Indexable Inserts: DCMT 11T3"},{"@type":"Thing","name":"Left-Hand Cutting"}],"mentions":[{"@type":"Thing","name":"TA030 U-Plate"},{"@type":"Thing","name":"T15 Torx Key"},{"@type":"Thing","name":"M3.5x11 Torx Screw"}]}]}
Turning Holder — SVJB for VBMT Indexable Inserts (Flat Design) by Teknik Makina The Turning Holder is a compact SVJB toolholder engineered for VBMT indexable inserts, ideal for precise left-hand turning and flat machining tasks. Supports VBMT 1103 indexable inserts Flat SVJB design for space-saving setups Internal cooling for improved chip evacuation Left-hand cutting direction for specific toolpaths ISO SVJBL 1212 clamping interface for secure fixing Consistent Clamping for Reliable Turning A robust clamping concept ensures the Turning Holder delivers reproducible results in serial and individual parts production. The SVJB Geometry stabilises the VBMT Insert, reducing vibration and promoting consistent Surface Finish. Operators benefit from a secure fit thanks to the ISO designation SVJBL 1212, which simplifies tool change and guarantees repeatable Positioning without compromising Cutting Accuracy. Cooling Integration That Improves Cycle Time Built-in Internal Cooling channels are integrated to direct coolant close to the Cutting Edge, which prolongs Insert Life and supports higher Material Removal Rates. This feature reduces heat buildup at the Cut Zone and helps with chip control in difficult-to-machine materials. For workshops aiming to optimise cycle time, the Cooling option contributes to steadier Cutting Conditions and fewer unscheduled Insert changes. Compact Dimensions Designed for Workshop Flexibility With a Total Length of 110 mm and a Total Height of 12 mm, the holder fits into tight Toolpost layouts and compact Turret stations. The Clamping Width and Head Width are both 12 mm, making the unit suitable for confined setups where clearance is limited. The Flat Design enables closer proximity to the Workpiece, which is particularly useful for short overhang applications and operations requiring minimal tool projection. Intended Use, Tools and Easy Maintenance This product is suited for Machinists and Toolroom Specialists who require a reliable holder for VBMT 1103 inserts in left-hand Turning operations. Assembly and maintenance are straightforward: the holder uses a Torx key T8 and Torx screws M2.5x6.5, allowing quick replacement of Inserts and secure fastening. The specified Cutting Angle of 93° supports a balance between cutting strength and access for profiling. For tailored advice on Insert grades or machining parameters, METAV Werkzeuge offers experienced technical support. We recommend Teknik Makina's Turning Holder for precision left-hand turning tasks — for complementary technical data or personalised application advice, contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Designation: Klemmhalter Brand: Teknik Makina SKU: AP558TM Product Type: Turning Holder (SVJB for VBMT Indexable Inserts) Compatible Inserts: VBMT 1103 Clamping Holder ISO: SVJBL 1212 Cutting Direction: left Cutting Angle: 93 Total Length: 110 mm Total Height: 12 mm Clamping Width: 12 mm Head Width: 12 mm Insert Cutting Height: 32 mm Internal Cooling: true Torx Key: T8 Torx Screw: M2.5x6.5 Manufacturer: Teknik Makina Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What Inserts fit the Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is designed to accept VBMT 1103 indexable inserts, providing a reliable support interface for common turning applications with the SVJB flat configuration. Does the Turning Holder include Internal Cooling? Yes, the Turning Holder by Teknik Makina features Internal Cooling channels to direct coolant toward the Cutting Edge, which supports longer Insert Life and improved chip control. Which tools are required to service the Turning Holder? Servicing the Turning Holder requires a Torx Key T8 and Torx Screws M2.5x6.5 for secure mounting and quick Insert replacement; METAV Werkzeuge can advise on maintenance best practices. Can METAV Werkzeuge help with application-specific setup? METAV Werkzeuge provides competent technical consultation for the Turning Holder by Teknik Makina; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support. 110mm SVJB Turning Holder for VBMT 1103, 12mm, internal coolant, left cut - Teknik Makina
Turning Holder (SVJC for VCMT Indexable Inserts) by Teknik Makina The Turning Holder (SVJC for VCMT Indexable Inserts) is a flat-style clamping tool designed for precision turning with VCMT 1103 inserts in left-hand machining operations. Flat SVJC turning holder for VCMT 1103 inserts Internal Cooling for stable chip control Left-hand cutting with 93° cutting angle Compact 110 mm length, 12 mm shank dimensions Torx T8 key and M2.5x6.5 fastening specification Precision Design for Reliable Turning Engineered for repeatable results, this clamping tool matches the ISO designation SVJCL 1212 and is optimised for VCMT 1103 indexable inserts. The Holder’s 110 mm overall length and 12 mm shank dimensions deliver a compact setup that reduces overhang and vibration, improving surface finish and tool life. By combining accurate seating geometry with a defined cutting height of 32 mm, the design ensures consistent Insert positioning and reliable radial clearance, which contributes directly to predictable machining outcomes. Optimised Chip Evacuation and Secure Clamping Built-in Internal Cooling guides coolant close to the cutting edge to support chip control and temperature management during continuous turning operations. The tool is configured for left-hand cutting and features a 93° Cutting Angle that balances cutting forces and stability. Fastening is specified with a Torx T8 interface and screw size M2.5x6.5, enabling secure clamping of VCMT inserts and straightforward assembly when replacing Inserts or adjusting the toolholder. Suitable Applications and Who Benefits Workshops performing precision turning, toolroom setups and light production runs will gain from the compact footprint and insert compatibility of this Holder. The product is suited for operations that require left-hand turning or specific fixture orientations. Shop technicians and process engineers benefit from quick insert changes and the Holder’s predictable geometry, which simplifies setup and reduces downtime. The compact shank size makes it particularly useful where space or turret clearance is limited. Practical Durability and Setup Advice The Holder’s dimensions and mechanical interfaces are chosen for robustness in daily use: a consistent clamping interface and standardised screw drive support repeatable assembly. For best results, pair the tool with VCMT 1103 grade inserts matched to the workpiece material; correct insert grade selection reduces wear and improves surface quality. If additional technical data or setup recommendations are required, METAV Werkzeuge offers expert consultation and can assist with matching insert grades or mounting procedures. We recommend the Teknik Makina Turning Holder (SVJC for VCMT Indexable Inserts) for reliable left-hand turning—contact METAV Werkzeuge for individual technical advice at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Specifications Bezeichnung: Klemmhalter / Turning Holder (SVJC for VCMT Indexable Inserts) Marke / Manufacturer: Teknik Makina SKU: AP537TM Compatible Inserts: VCMT 1103 ISO Designation: SVJCL 1212 Overall Length: 110 mm Total Height: 12 mm Shank Width: 12 mm Cutting Head Width: 12 mm Cutting Height: 32 mm Cutting Direction: Left Cutting Angle: 93° Internal Cooling: Yes Torx Key: T8 Torx Screw Specification: M2,5x6,5 Drill Holder Reference: J11-F-IK Weight: 0.1 kg Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ Is the Turning Holder compatible with VCMT 1103 inserts? Yes, the Turning Holder from Teknik Makina is designed specifically for use with VCMT 1103 indexable inserts and seats them according to the SVJCL 1212 interface for secure clamping. Can this holder be used for right-hand turning applications? The Turning Holder (SVJC for VCMT Indexable Inserts) is specified for left-hand cutting; for right-hand operations, please consult METAV Werkzeuge to identify an appropriate counterpart. Does the Turning Holder include internal coolant capability? The Teknik Makina Turning Holder supports Internal Cooling to direct coolant toward the cutting edge, improving chip evacuation and thermal control during machining. What tools are required for insert clamping and replacement? Assembly and Insert fastening use a Torx T8 drive and screw size M2.5x6.5; these specifications ensure safe and repeatable clamping when servicing the holder. Need help selecting the right insert or setup for the Turning Holder? If you are uncertain whether this Turning Holder meets your requirements or if you need further technical details, METAV Werkzeuge provides competent advice—contact info@metav-werkzeuge.com or call +49 2822 7131930. 93° SVJC Turning Holder 12mm, Internal Coolant, Left Cut for VCMT 1103 - Teknik Makina
Technical Data: Order Number: S812TM Item: End Mill usable with SPMG 0502 Indexable Inserts of Taegutec Brand: Teknik Makina Numbers and Data: Diameter: 13,5mm Cutting Edges: 2 Weight: 0.149kg Total length: 120mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Detailed Technical Data: Item: Indexable Drill Brand: Teknik Makina Order Number: U813-1TM usable with SPMG 0502 Indexable Inserts the Herstellers Taegutecs und YG-1s Diameter: 13,5mm Total length: 107mm Diameter Connection: 20mm Weight: 0.167kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Product Information: Order Number: S810TM Item: End Mill usable with SPMG 0502 Indexable Inserts the Hersteller's Taegutec Brand: Teknik Makina Numerical Representations: Diameter: 13mm Cutting Edges: 2 Weight: 0.147kg Total length: 120mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Technical Specifications: Order Number: U004TM Item: Indexable Drill usable with SPMT 0502 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Quantitative Characteristics: Diameter: 13mm Weight: 0.154kg Total length: 107mm Diameter Connection: 20mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Available Technical Details: Order Number: U813TM Item: Indexable Drill usable with SPMG 0502 Indexable Inserts the Herstellers Taegutecs und YG-1s Brand: Teknik Makina Numerical Representations: Diameter: 13mm Weight: 0.164kg Total length: 107mm Diameter Connection: 20mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Comprehensive Technical Specifications: Order Number: U713TM Item: Indexable Drill usable with SPMG 0502 Indexable Inserts the Herstellers Taegutecs und YG-1s Brand: Teknik Makina Quantitative Specifications: Diameter: 13mm Weight: 0.17kg Total length: 120mm Diameter Connection: 20mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Comprehensive Technical Specifications: Order Number: U913TM Item: Indexable Drill usable with SÜMG 0502 Indexable Inserts the Herstellers Taegutecs und YG-1s Brand: Teknik Makina Numerical Representations: Diameter: 13mm Weight: 0.145kg Total length: 94mm Diameter Connection: 20mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Product Technical Specifications: Order Number: U300TM Item: Indexable Drill usable with SOMT 0502 Indexable Inserts of Taegutec Brand: Teknik Makina Structural Details: Diameter: 13mm Weight: 0.157kg Total length: 111mm Diameter Connection: 20mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Technical Data: Order Number: U814-1TM Item: Indexable Drill usable with SPMG 0502 Indexable Inserts of Taegutec und YG-1 Brand: Teknik Makina Metric Information: Diameter: 14,5mm Weight: 0.17kg Total length: 110mm Diameter Connection: 20mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Characteristics: Order Number: U403TM Item: Indexable Drill usable with SOMT 0502 Indexable Inserts of Taegutec Brand: Teknik Makina Structural Details: Diameter: 14,5mm Weight: 0.175kg Total length: 128mm Diameter Connection: 20mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Product Technical Specifications: Order Number: U303TM Item: Indexable Drill usable with SOMT 0502 Indexable Inserts of Taegutec Brand: Teknik Makina Quantitative Specifications: Diameter: 14,5mm Weight: 0.17kg Total length: 114mm Diameter Connection: 20mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Detailed Technical Data: Order Number: S226TM Item: End Mill usable with APMT 11T3 Indexable Inserts of Korloy Brand: Teknik Makina Numbers and Data: Diameter: 14mm Cutting Edges: 1 Weight: 0.139kg Total length: 90mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Product Technical Details: Order Number: S138TM Item: End Mill usable with APXT 1003 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Numbers and Data: Diameter: 14mm Cutting Edges: 1 Weight: 0.126kg Total length: 100mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Technical Data: Order Number: S160TM Item: End Mill usable with APXT 1003 Indexable Inserts of Korloy Brand: Teknik Makina Structural Details: Diameter: 14mm Cutting Edges: 1 Weight: 0.15kg Total length: 120mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
Product Technical Specifications: Order Number: S814TM Item: End Mill usable with SPMG 0602 Indexable Inserts of Taegutec Brand: Teknik Makina Numbers and Data: Diameter: 14mm Cutting Edges: 2 Weight: 0.148kg Total length: 120mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com