CPMT 09T308 AH725 Wendeplatten - Tungaloy
Combining the PVD-coated cemented carbide AH725 grade with ISO-compatible geometry and a 0.8 mm corner radius delivers consistent chip control and robust edge life for demanding turning tasks; order the insert via Metav Werkzeuge or request tailored advice from the technical team. CPMT09T308 AH725 ISO turning insert for turning operations — Tungaloy The CPMT09T308 AH725 is an ISO-format turning insert designed for external and internal turning, offering a single-sided chipbreaker and a cylindrical hole with a one-side countersink for secure clamping. PVD-coated cemented carbide AH725 Universal grade for steel and stainless steels 0.8 mm corner radius for controlled cuts Cylindrical hole with single-side countersink Consistent chip control from a dedicated grade The combination of a PVD-coated surface and the AH725 cemented carbide grade provides steady cutting behaviour and improved wear resistance. The coating reduces built-up edge tendency and promotes reliable chip control, which is particularly beneficial when machining mixed batches of alloyed steel and stainless steels. This quality leads to fewer interruptions for insert changes and supports stable cycle times on production runs. Geometry and clamping engineered for compatibility The ISO-format geometry with an included angle of 80° and an 11° clearance angle ensures broad compatibility with standard holders; the insert’s rhombic form and the cylindrical hole with a single-side countersink facilitate straightforward, repeatable clamping. These design choices reduce setup variability and allow for quick insertion into established tool systems, supporting efficient changeovers and maintaining concentricity during turning. Edge integrity and predictable performance for turning A 0.8 mm corner radius provides a balance between cutting edge strength and surface finish, making the insert suitable for finishing and light to moderate semi-finishing passes. The single-sided chipbreaker is matched to the grade to control chip formation at a variety of cutting conditions, so the user benefits from predictable forces and a lowered risk of insert chipping under intermittent cuts or variable material hardness. Practical application guidance and handling notes The insert is intended for general-purpose turning where process reliability is a priority; the universal AH725 grade is appropriate when batches include both steels and stainless steels or when tool inventory should be minimised. For best results, select a matching holder that respects the insert’s form, tolerance class and thickness (3.97 mm), and set cutting data in accordance with the machine rigidity and workpiece material to exploit the grade’s strength in productive metal removal. For technical recommendations on the Tungaloy AH725 grade and to secure the CPMT09T308 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6863527 SKU: 6863527-Tungaloy Manufacturer SKU: TUN6863527 Designation: CPMT09T308 AH725 Tungaloy insert Manufacturer: Tungaloy Material: cemented carbide Facts Corner radius: 0.8 mm Clearance angle: 11° Included angle: 80° Plate thickness: 3.97 mm Plate size: 09 Special features ISO turning insert series Rhombic plate form Single-sided chipbreaker Cylindrical hole + one-side countersink (40°–60°) PVD-coated cemented carbide, grade AH725 Application: turning FAQ What materials is this insert intended for? The CPMT09T308 AH725 insert is specified for machining steels and stainless steels; the AH725 grade offers universal, crack-resistant performance across these materials. How does the AH725 grade affect tool life? The PVD-coated AH725 cemented carbide provides improved wear resistance and stable cutting behaviour, which helps to extend effective insert life under typical turning conditions. Which holder features are required for secure mounting? A compatible holder matching the ISO-form, thickness (3.97 mm), hole style and tolerance class is required; the cylindrical hole with one-side countersink ensures secure clamping for repeatable position and stability. Is the insert suitable for finishing operations? With a 0.8 mm corner radius and a matched chipbreaker, the insert can be used for finishing and light semi-finishing passes where a balance of surface quality and edge strength is needed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 AH8005 Wendeplatten - Tungaloy
Reliable machining of heat‑resistant alloys and hard materials is achieved by combining the PVD‑coated carbide AH8005 grade with the 80° rhomboid geometry and a 0.8 mm corner radius for consistent surface finish and extended tool life. The ISO CPMT09T308 form ensures precise seating in standard holders. Order the insert directly via Metav Werkzeuge or consult the specialists for application‑specific recommendations. CPMT 09T308 AH8005 turning insert — Tungaloy A CPMT09T308 AH8005 ISO rhombic turning insert engineered for stable external and internal turning of heat‑resistant alloys and hard materials. ISO rhombic insert CPMT 09T308 PVD-coated carbide grade AH8005 80° cutting angle, 11° clearance Single-sided chipbreaker, corner radius 0.8 Increased productivity through robust grade and geometry The combination of a PVD coating with a wear‑resistant carbide substrate in grade AH8005 delivers improved edge stability during sustained cuts. This construction reduces flank wear and extends effective tool life, which leads to fewer indexings and less downtime. The 80° cutting angle gives a strong cutting edge suited to interrupted cuts and heavy feeds, while the 0.8 mm corner radius contributes to a predictable surface finish. For production environments seeking higher throughput, this geometry and grade help maintain consistent cycle times and reduce tooling costs per component. Interchangeability and reliable clamping for easy integration Compliance with ISO form CPMT09T308 ensures that the insert fits a wide range of standard external holders and boring bars when form, relief angle, tolerance class, fastening type, size and thickness match. The CPMT shape and the specified 11° clearance help avoid unwanted rubbing and ensure stable contact in the seat. The rhomboid design offers flexibility for both external and internal turning operations and simplifies inventory management, since compatible insert families and holder systems can be used across multiple machining tasks. Application guidance and material suitability explained The cutting material is optimised for machining heat‑resistant alloys and hard materials under stable machining conditions. The PVD coating provides a thin, hard layer that improves wear resistance and thermal stability; this is particularly beneficial when working with tough superalloys or hardened workpieces. For customers unfamiliar with the terminology: PVD (physical vapor deposition) forms a protective film on the carbide substrate to reduce adhesion and crater wear, while the carbide core maintains edge strength. Selecting the correct chipbreaker and cutting parameters is essential to exploit these benefits and achieve the desired surface integrity. Practical handling, mounting and system considerations The insert is supplied in the ISO CPMT09T308 form with a cylindrical hole and single‑sided countersink (40°–60°), compatible with common clamping screws and seat designs. The plate thickness of 3.97 mm and the single‑sided chipbreaker are tailored for stable turning; the chipbreaker helps control swarf in continuous cuts and supports predictable chip formation. Where system assembly is required, use the appropriate external holder or boring bar together with the correct shim/clamp set and replacement screws to secure repeatable clamping. For demanding or variable conditions, match the chipbreaker and grade to the workpiece material and rigidity of the setup to maintain process reliability. Contact Metav Werkzeuge for tailored advice on Tungaloy PVD‑coated carbide inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the CPMT 09T308 AH8005 for specific operations Technical data Article number: 6775786 Core data ISO designation: CPMT09T308 Cutting angle: 80° Clearance angle: 11° Thickness: 3.97 mm Corner radius: 0.8 mm Size: 09 Special features Grade: AH8005 Material: PVD‑coated carbide Shape: rhombic (CPMT) Chipbreaker: single‑sided Hole: cylindrical hole with single‑sided countersink (40°–60°) Typical application: turning (external and internal) System components: ISO insert, compatible external holder or boring bar, shim/clamp set and replacement screws Manufacturer SKU: TUN6775786 FAQ What materials is this insert best suited for? The CPMT09T308 AH8005 insert is optimised for heat‑resistant alloys and hard materials; the PVD‑coated carbide grade AH8005 improves wear resistance in these applications. How does the ISO designation affect holder compatibility? ISO form CPMT09T308 indicates the rhombic shape and standard dimensions, which facilitates compatibility with holders and boring bars designed for CPMT inserts when form, thickness and fastening match. Which chipbreaker is fitted and what is its effect? This insert features a single‑sided chipbreaker, designed to promote predictable chip formation during stable turning operations and to aid evacuation in continuous cuts. What mounting features must be observed during assembly? The plate has a cylindrical hole with a single‑sided countersink (40°–60°); use the correct clamp/shim and screw torque for repeatable clamping and to avoid seating errors. Can the insert be used for interrupted cuts? Yes — the 80° cutting angle provides a robust cutting edge suitable for interrupted cuts and applications requiring higher edge strength. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 09T308 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8015 carbide, ISO conformity and a compact 0.8 mm corner radius for reliable turning of heat-resistant alloys; order the insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. CPMT09T308 AH8015 indexable turning insert by Tungaloy — PVD-coated carbide, 80° rhombic geometry The CPMT09T308 AH8015 is an ISO-standard indexable insert for external and internal turning, optimised for machining heat-resistant alloys with predictable wear behaviour and consistent surface quality PVD-coated carbide AH8015 ISO rhombic 80° geometry 0.8 mm corner radius Compatible with ISO turning holders Consistent grade for demanding alloys and uptime The AH8015 grade is a PVD-coated carbide developed as a balanced solution between wear resistance and cutting-edge stability, making it particularly suitable for machining heat-resistant alloys. The coating reduces adhesion and thermal softening at the cutting edge, which translates into longer intervals between indexings and fewer tool changes. For production environments focused on throughput, this grade supports consistent component quality while reducing downtime, so that cycle times remain predictable and scrap rates are lowered. Geometry and rigidity designed for reliable surface finish An 80° rhombic geometry with a 0.8 mm corner radius provides a stable engagement angle that helps to control cutting forces and vibration during turning. The nominal 11° relief angle and the plate thickness of 3.97 mm contribute to insert rigidity; together these factors help to maintain dimensional accuracy and repeatable surface finish across serial runs. Explaining briefly: the included angle and corner radius determine how load and heat are distributed at the cutting zone—smaller radii help when precision is required, while the rhombic form improves access for various contouring operations. Secure fastening and simple integration into existing toolholders Compatibility with holders is governed by form, relief angle, tolerance class, fastening method, size and thickness, and this ISO-format insert is designed to match common external holders and boring bars. The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°), enabling secure clamping and straightforward indexing. Using a standard ISO clamping system reduces handling errors and makes inventory management easier, as holders, shims and spare screws form a simple system build for workshop integration. Controlled chip formation and efficient production The one-sided chipbreaker on this insert supports predictable chip formation for a range of cutting conditions, aiding chip evacuation and decreasing the risk of built-up edge. Combined with the PVD coating and the carbide substrate, this leads to a favourable cost-benefit ratio where tool life and surface integrity justify process consistency. In practical terms, the result is fewer interruptions for tool changes, improved surface quality and enhanced process reliability—attributes that directly support higher machine utilisation and lower per-part machining costs. For machining heat-resistant alloys with robust process stability, contact Metav Werkzeuge for ordering and application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6825786 Manufacturer SKU: TUN6825786 Label: CPMT09T308 AH8015 Tungaloy-Wendeplatte Facts Corner radius: 0.8 mm Included angle: 80° Relief angle: 11° Plate thickness: 3.97 mm Plate size: 09 Special features Grade/coating: AH8015, PVD-coated carbide Shape: rhombic, ISO 09T308 Hole: cylindrical hole with single-side countersink (40°–60°) Chipbreaker: one-sided Application: turning; external and internal machining System: ISO insert, holder, shim/clamping set and spare screws FAQ What materials is this insert best suited for? The CPMT09T308 AH8015 indexable turning insert is intended primarily for heat-resistant alloys, offering a good balance of wear resistance and edge stability for general turning operations. Is the insert compatible with standard ISO holders? Yes. The insert follows ISO dimensions (09T308) and is compatible with holders that match the form, relief angle, tolerance class, fastening and thickness; the cylindrical hole with countersink ensures secure clamping. What does the AH8015 designation indicate? AH8015 denotes a PVD-coated carbide grade engineered for first-choice performance on heat-resistant materials, providing improved tool life and stable cutting-edge behaviour under thermal stress. Can this insert be used for internal machining as well as external turning? Yes. The rhombic geometry and compact corner radius allow the insert to be used for both external and internal turning, with appropriate holder selection and cutting parameters. How does the chipbreaker affect production stability? The one-sided chipbreaker promotes controlled chip formation and evacuation, reducing the risk of interruptions from tangled chips and contributing to consistent surface finish and process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 AH8015 Wendeplatten - Tungaloy
Take advantage of a balanced combination of wear resistance and cutting-edge stability with the PVD-coated carbide grade AH8015 and the precise 0.8 mm corner radius for consistent turning results; order directly via Metav Werkzeuge or consult our team for holder compatibility and process optimisation. CPMT 09T308 AH8015 Tungaloy turning insert — PVD-coated carbide, 0.8 mm radius A CPMT09T308 AH8015 indexable turning insert designed for general turning of heat-resistant alloys, offering a rhombic geometry with a centre hole for secure clamping PVD-coated carbide for heat-resistant alloys 0.8 mm corner radius for consistent edge strength 11° clearance angle for secure cutting geometry ISO CPMT09T308 rhombic insert with centre hole Consistent performance on heat-resistant alloys through balanced material design The combination of PVD-coated surface treatment and carbide substrate in the AH8015 grade delivers a measured trade-off between wear resistance and edge stability, making it particularly suitable for machining heat-resistant alloys. The coating reduces abrasive wear and thermal sensitivity during longer engagements, which translates into fewer indexing steps and more predictable tool life. For production environments where repeatability matters, this insert supports steady component quality while helping to contain tooling costs through extended service intervals. Geometry and mounting that simplify setup and improve process reliability The rhombic plate form and the ISO designation ensure a standardised fit with compatible clamping systems; the ISO CPMT09T308 shape combined with a centre hole (cylindrical hole plus single-side countersink at 40°–60°) permits reliable locating and consistent clamp preload. The 11° clearance angle reduces rubbing on the flank face while the 0.8 mm corner radius increases edge robustness for interrupted cuts or variable engagement. Thickness (3.97 mm) and plate size (09) are engineered to match a broad range of external holders; compatibility is ultimately determined by form, clearance, tolerance class, fixing, size and thickness. Practical machining benefits and selection guidance for stable chip control Equipped with a single-sided chipbreaker, the insert promotes controlled chip formation under moderate to demanding conditions, improving evacuation and surface finish with fewer secondary operations. As an indexable solution, it allows quick rotation to fresh cutting edges, reducing downtime. Select the matching chipbreaker style and holder stiffness according to part geometry and machine rigidity to exploit the grade’s balance of wear resistance and edge stability—this approach yields higher productivity and predictable results in batch and single-piece production alike. For tailored advice on integrating the Tungaloy CPMT09T308 AH8015 insert into production, contact Metav Werkzeuge—our specialists can recommend suitable holders, clamping options and process parameters to match specific turning tasks Technical data Article number: 6825753 Manufacturer SKU: TUN6825753 Shop SKU: 6825753-Tungaloy Model series: ISO turning inserts Data Corner radius: 0.8 mm Clearance angle: 11° Plate thickness: 3.97 mm Plate size: 09 Insert angle: 80° ISO designation: 09T308 Special features PVD-coated carbide (AH8015) Rhombic plate shape (CPMT) Centre hole with cylindrical hole and single-side countersink (40°–60°) Single-sided chipbreaker Designed for turning of heat-resistant alloys Compatibility determined by form, clearance, tolerance class, fixing, size and thickness FAQ What materials is this insert suitable for? The AH8015 grade PVD-coated CPMT09T308 insert is intended primarily for the general turning of heat-resistant alloys, while also performing well on a range of alloyed steels where a balance of wear resistance and edge stability is required. What does the AH8015 designation indicate? AH8015 denotes the carbide grade and coating concept: a PVD-coated carbide combination optimised to offer a compromise between wear resistance and cutting-edge stability for elevated-temperature applications. How is the insert secured in the holder? The insert uses a centre hole with a cylindrical bore plus a single-side countersink (40°–60°) to enable positive locating and clamping; correct fit also depends on holder form, clearance, tolerance class, fixing, size and thickness. What chip control can be expected? With a single-sided chipbreaker, the insert promotes stable chip formation and reliable evacuation under typical turning conditions, supporting improved surface quality and reduced secondary handling. Is this insert indexable and replaceable? Yes — the ISO CPMT09T308 is an indexable turning insert designed for quick edge rotation and replacement; reference the manufacturer SKU TUN6825753 or article number 6825753 for ordering and compatibility checks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, precise 0.8 mm corner radius and ISO compatibility for consistent turning results and reduced tool change frequency. Order the CPMT09T308 AH8015 insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT09T308 AH8015 indexable insert for turning by Tungaloy — PVD-coated carbide, 0.8 mm radius The CPMT09T308 AH8015 is an ISO-format, rhombic indexable insert optimised for external and internal turning of heat-resistant alloys and other demanding materials. PVD-coated carbide AH8015 for heat-resistant alloys ISO rhombic insert, radius 0.8 mm 11° relief angle with cylindrical hole and countersink Single-sided chipbreaker; thickness 3.97 mm Consistent wear resistance for predictable cycle times The PVD-coated carbide grade AH8015 offers a balanced combination of wear resistance and cutting-edge stability that keeps machining predictable across batches. For machining heat-resistant alloys, this composition reduces flank wear and prolongs edge life, which translates into fewer interruptions and lower cost per component. Choosing a plate with a defined 0.8 mm corner radius provides a compromise between edge strength and surface quality, ensuring component tolerance retention without excessive burr formation. These characteristics are particularly relevant where process repeatability and low scrap rates are priorities in production environments. ISO conformity for straightforward tool integration Built to the ISO dimensions and designation system, the insert integrates reliably into standard toolholders; compatibility is governed by plate geometry, relief angle, tolerance class, attachment method, size and thickness. The rhombic shape and the cylindrical hole with a single-sided countersink (40°–60°) ensure secure clamping and repeatable seating in compatible holders or boring bars. For workshop logistics, this standardisation simplifies inventory and replacement strategies: identical holder types accept the same insert geometry, reducing downtime and easing tool management across multiple machines. Geometry and chip control that support surface finish and stability The single-sided chipbreaker and the plate thickness of 3.97 mm combine to provide effective chip formation and evacuation during turning operations. The 11° relief angle reduces rubbing at the flank while maintaining cutting edge support; together with the plate’s robust backing, this geometry resists deflection under moderate cutting forces. The controlled chip flow afforded by the chipbreaker improves surface finishes and reduces secondary operations, while the rhombic outline allows both external profiling and internal boring where access and clearance permit. For operations that demand a balance between productivity and finish quality, this design delivers measurable advantages. Contact Metav Werkzeuge to confirm the best holder and cutting parameters for the CPMT09T308 AH8015 insert and to arrange fast supply from stock Technical data Article number: 6775787 Manufacturer SKU: TUN6775787 Item SKU: 6775787-Tungaloy Model series: ISO indexable turning inserts Core data Corner radius: 0.8 mm Plate thickness: 3.97 mm Relief angle: 11° Included angle: 80° Plate size: 09 ISO designation: 09T308 Special features PVD-coated carbide AH8015 Material: carbide Rhombic plate geometry With hole: cylindrical hole + single-sided countersink (40°–60°) Single-sided chipbreaker Application: turning (external and internal) Compatible with ISO-standard holders FAQ Is this insert suitable for heat-resistant alloys? The CPMT09T308 AH8015 insert is explicitly designed as a first choice for the general machining of heat-resistant alloys owing to its PVD-coated carbide grade AH8015, which balances wear resistance and edge stability. Which holders and clamping types are compatible with this plate? Compatibility depends on the holder matching the ISO geometry: form, relief angle, tolerance class, fixing method, size and thickness must align; the CPMT09T308 fits standard ISO holders with a matching seat and screw arrangement. What effect does the 0.8 mm corner radius have on machining? A 0.8 mm corner radius increases edge robustness and improves tool life under interrupted cuts, while still allowing acceptable surface finish; it is a pragmatic choice for mixed turning tasks where both strength and finish matter. How does the single-sided chipbreaker influence performance? The single-sided chipbreaker on this insert promotes consistent chip formation and evacuation, supporting stable cutting and improved surface quality during both finishing and semi-finishing passes. Are thread or special profiles recommended with this insert shape? The rhombic geometry is primarily intended for profiling and general turning; for specialised thread or form profiles, selecting a dedicated geometry or a specific insert design is advised to ensure optimal results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing and dependable ISO compatibility: the uncoated cermet grade NS9530 delivers a sharp cutting edge with low cutting forces for superior surface finish, while standardised plate geometry and a clear relief angle ensure secure mounting in ISO holders. Order the CPMT09T308 NS9530 turning insert directly via Metav Werkzeuge or consult our advisors if needed. CPMT 09T308 NS9530 ISO Turning Insert, 11° relief – Tungaloy The CPMT09T308 NS9530 is a rhombic ISO turning insert designed for finishing operations on steel, offering an uncoated cermet grade with an 11° relief for continuous cuts and high surface quality. CPMT09T308 ISO rhombic insert, 11° relief Uncoated cermet NS9530 for fine finishing Single-sided chipbreaker, suitable for continuous cut Compatible with ISO holders, 3.97 mm thickness Consistent finishing performance for steel components The finishing grade NS9530 is optimised for turning of steel where a sharp cutting edge and low cutting forces are required. As an uncoated cermet, the grade reduces rubbing and produces a superior surface finish at small depths of cut and during continuous cutting cycles. This delivers a reliable dimensional outcome and minimises post-process polishing, supporting tighter tolerances and fewer reworked parts. Secure clamping and standardised geometry for easy integration Standard ISO geometry and the rhombic plate outline make holder selection straightforward: the 11° relief angle, 3.97 mm plate thickness and defined plate size ensure repeatable seating and clamping. The insert features a cylindrical hole with a single-sided countersink (40°–60°) which assists accurate alignment and fastening. Clear compatibility criteria—shape, relief angle, tolerance class, fastening, size and thickness—simplify toolroom logistics and reduce setup time. Predictable chip control and economical process stability A single-sided chipbreaker tailored for finishing supports consistent chip formation during continuous feeds, improving swarf evacuation and reducing the risk of built-up edge. Together with the NS9530 material properties, this promotes predictable chip control and steady tool wear behaviour, translating into longer effective cutting times and lower overall tooling costs per manufactured component. Selection of the correct chipbreaker and grade according to workpiece material and machining stability remains essential for optimal results. Contact Metav Werkzeuge for a recommendation tailored to the machining task or to request the Tungaloy CPMT09T308 NS9530 specification; technical advisors are available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Manufacturer article number: 6945228 SKU: 6945228-Tungaloy Manufacturer SKU: TUN6945228 Designation: CPMT09T308 Grade: NS9530 Facts Plate size: 09 Plate form: rhombic Plate thickness: 3.97 mm Relief angle: 11° Included angle: 80° Corner radius: 0.8 mm Features / Applications Material: carbide (hardmetal) Uncoated cermet finishing grade Single-sided chipbreaker With cylindrical hole and single-sided countersink (40°–60°) ISO-standard turning insert system Typical use: external and internal turning; continuous cuts and small depths of cut System components: ISO insert, matching external holder or boring bar, shim/clamp set and spare screws FAQ What is the primary application of this insert? The CPMT09T308 NS9530 turning insert is intended for finishing turning operations on steel, optimised for continuous cuts and small depth-of-cut conditions. Which holder characteristics must be checked for compatibility? Compatibility depends on holder shape, relief angle (11°), tolerance class, fastening method, plate size and thickness (3.97 mm), so choose an ISO holder that matches these dimensions. Is the NS9530 grade coated or uncoated? NS9530 is an uncoated cermet finishing grade designed to provide a sharp edge and low cutting forces for improved surface finish. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert supports predictable chip formation during continuous feeds, aiding chip control and reducing the chance of built-up edge. Can this insert be used for internal turning? Yes, the ISO rhombic shape and standardised dimensions make the insert suitable for both external and internal turning when paired with the appropriate boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, long tool life and ISO compatibility for reliable production results. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. CPMT 09T308 09T308 NS9530 Tungaloy — 80° rhombic indexable turning insert, uncoated cermet the CPMT09T308 NS9530 is an ISO-format rhombic insert designed for precision turning and finishing of steel components 80° rhombic geometry for versatile turning Sharp uncoated cermet grade NS9530 for fine finishes Single-sided chipbreaker for continuous cuts ISO-compatible for standard turning holders Consistent finishing performance and process efficiency The rhombic 80° geometry combined with the NS9530 uncoated cermet grade delivers a stable cutting edge and low cutting forces, making it ideal for continuous finishing passes on steel. The insert’s sharp edge reduces built-up edge formation and helps achieve a superior surface finish with minimal secondary operations. The ISO-conformant form and tolerances ensure interchangeability with standard indexable turning systems, maintaining uptime and simplifying inventory management. The engineered combination of geometry and grade supports higher cutting speeds with predictable tool life, which translates into measurable productivity gains on serial production runs. Predictable chip control and machinability benefits Equipped with a single-sided chipbreaker, the insert ensures consistent chip formation during light to moderate depth-of-cut operations, reducing the risk of chip entanglement and supporting automated machining cycles. The 0.8 mm corner radius provides a compromise between edge strength and surface quality, suitable for fine-finishing passes where dimensional stability matters. Although uncoated, the cermet composition enhances wear resistance and maintains a sharp cutting profile for polished surfaces; this makes the insert particularly appropriate for continuous cuts and small material removal rates. For process planning, select holder rigidity, feed and depth to match the finishing intent and material batch. Compatibility, handling and practical application notes The ISO designation and the plate’s dimensions — including a 3.97 mm plate thickness and the cylindrical hole with one-sided countersink (40°–60°) — define mounting and clamping requirements; compatibility with a matching clamping set and replacement screws is determined by holder form, free angle and tolerance class. The insert is supplied with a cemented carbide substrate and an uncoated cermet cutting edge suited to steel machining. For setups demanding repeatable surface quality in production, combine this insert with a stable toolholder and fine-tuned feeds; the result is lower rework and consistent part quality across batches. For high-precision finishing with Tungaloy’s NS9530 cermet grade, contact Metav Werkzeuge for ordering and application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6945237 Manufacturer SKU: TUN6945237 SKU: 6945237-Tungaloy ISO designation: CPMT09T308 Numbers / Core technical data Plate thickness: 3.97 mm Corner radius: 0.8 mm Free angle: 11° Main angle: 80° Plate size: 09 Designs / Special features Rhombic plate form Cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Uncoated cermet cutting grade NS9530 Cemented carbide substrate Application: turning (finishing) FAQ What materials is this insert suitable for machining? The CPMT09T308 NS9530 insert is optimised for machining steel; the uncoated cermet grade NS9530 offers low cutting forces and high surface quality when used on steel components. How does the NS9530 grade benefit finishing operations? NS9530 provides a sharp, wear-resistant cutting edge that supports continuous finishing passes, resulting in improved surface finish and reduced secondary processing when the CPMT09T308 insert is used in a stable setup. Which holders are compatible with this ISO-format insert? Compatibility depends on holder form, free angle and tolerance class; the CPMT09T308 fits standard ISO turning holders configured for 80° rhombic inserts with the matching clamping arrangement. What chip control can be expected with this insert? The single-sided chipbreaker on the CPMT09T308 promotes controlled chip formation during light to moderate finishing cuts, reducing chip interference and facilitating automated machining. Can the insert be used for interrupted cuts or heavy roughing? This insert is a finishing-grade solution; for interrupted cuts or heavy roughing, a different geometry and grade would be preferred to protect edge stability and extend life of tools. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp uncoated cermet grade and a 0.8 mm corner radius to achieve consistent finishing on steel components; the ISO rhombic geometry with 11° clearance supports reliable mounting and stable cutting in continuous operations. Order the CPMT09T308 NS9530 insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT09T308 NS9530 – Turning insert (ISO rhombic) by Tungaloy The CPMT09T308 NS9530 is a rhombic ISO turning insert designed for finishing steel, offering a fine cutting edge and low cutting forces for continuous turning operations. Uncoated cermet grade NS9530 Sharp cutting edge for fine finishing Rhombic ISO plate with 11° clearance Cylindrical hole with countersink for secure fixing Consistent finishing and low cutting forces for steel The insert is manufactured as an uncoated cermet in grade NS9530, a material class that combines ceramic hardness with metallic toughness to deliver a sharp cutting edge and superior wear behaviour during finishing. This composition reduces microchipping and enables low cutting forces, which directly contributes to improved surface quality and reduced burr formation on steel parts. For continuous cuts and small depths of cut, the result is a predictable surface finish and fewer secondary operations. Geometry engineered for repeatable chip control and clamping A measured corner radius of 0.8 mm and an unilateral chipbreaker give the insert stable chip formation while preserving the fine edge required for finishing. The plate is supplied in the ISO rhombic 09 format with a plate thickness of 3.97 mm and a 11° clearance angle, creating a balance between rigidity and accessibility at the tool tip. The central fastening is provided via a cylindrical hole with a single-sided countersink (40°–60°) for secure positive location and consistent clamp preload, which supports repeatable tool changeover and process stability. Productivity gains through predictable performance Using a finishing-grade insert such as this reduces the need for corrective passes: the combination of a sharp cermet grade and optimised geometry supports low cutting forces and stable edge life, helping to maintain dimensional accuracy over longer cycles. In practice this can shorten cycle time for high-volume finishing and reduce scrap rates. The insert is ISO‑standardised, which aids quick replacement and consistent part-to-part performance when integrated into a controlled machining process. Compatibility, selection and application guidance Compatibility with a toolholder depends on the holder’s form, relief/clearance angle, tolerance class, method of fastening, size and thickness; ensure the holder matches these parameters before installation. This insert is intended for external and internal turning where a finishing cut is required; select this grade for continuous cuts and small material removal rates. For mixed-material environments, check the substrate suitability: the grade is optimised for steel finishing and performs best under stable cutting conditions and appropriate coolant or lubrication strategies. Contact Metav Werkzeuge for application advice or to confirm stock availability; Metav Werkzeuge's consultants can advise on holder compatibility and recommended cutting parameters for the CPMT09T308 NS9530 insert (SKU 6945233-Tungaloy). Email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance. Technical data Article number: 6945233 Manufacturer SKU: TUN6945233 Label: CPMT09T308 NS9530 Tungaloy-Wendeplatte Numbers / Core technical data Corner radius: 0.8 mm Clearance angle: 11° Included angle: 80° Plate thickness: 3.97 mm Plate size: 09 Special features Uncoated cermet grade NS9530 Rhombic ISO turning plate (CPMT) One-sided chipbreaker Cylindrical hole with one-side countersink (40°–60°) Intended application: turning (external and internal) ISO-standardised series for compatibility FAQ What materials is this insert best suited for? The CPMT09T308 NS9530 insert is optimised for finishing steel and is designed to deliver high surface quality and low cutting forces in continuous turning operations. How does the uncoated cermet grade affect performance? The uncoated cermet composition of the NS9530 grade provides a sharp edge and good wear resistance for finishing cuts, which helps to maintain surface finish and dimensional consistency during production. Which holder features determine compatibility with the insert? Holder compatibility is determined by form, clearance angle, tolerance class, method of fastening, size and plate thickness — matching these parameters ensures correct seating and clamping for reliable machining. Is the insert suitable for interrupted cuts or heavy roughing? This grade is a finishing sort geared towards continuous cuts and small depths of cut; for interrupted cuts or heavy roughing, select a grade and geometry designed for higher toughness and edge strength. What fastening arrangement does the plate use? The plate features a cylindrical hole with a single-sided countersink (40°–60°) for secure fixing and repeatable clamping in compatible ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 T505 Wendeplatten - Tungaloy
Secure economical cast-iron turning through the combination of a CVD-coated carbide T505 grade and an ISO rhombic geometry that delivers extended tool life and controlled chip formation; order directly via Metav Werkzeuge or contact our consultants for application support. CPMT 09T308 T505 turning insert — Tungaloy CVD-coated carbide, for cast iron A CPMT09T308 T505 indexable insert designed for ISO‑standard turning, optimised for efficient machining of cast iron components CPMT09T308 rhombic ISO insert CVD-coated carbide grade T505 Optimised for cast iron machining Cylindrical hole with 40°–60° countersink Reliable wear resistance for economical production The combination of CVD-coated surface and the T505 cutting grade provides a robust carbide substrate with enhanced wear resistance, making it particularly suitable for sustained operation on cast iron. The coating reduces flank wear and edge breakdown, which leads to fewer insert changes and less downtime. This results in a measurable improvement in process efficiency and a lower total cost per component when compared with uncoated alternatives, while maintaining consistent dimensional accuracy. Precise fit and secure clamping for consistent results Designed as an ISO indexable plate in a rhombic format, the insert ensures compatibility with standard external holders and boring bars when matched by form, relief, tolerance class, fastening, size and thickness. The 11° clearance angle and 3.97 mm thickness contribute to cutting-edge stability and resistance to vibration, while the 0.8 mm corner radius supports fine surface finishes and controlled depth-of-cut transitions. The CPMT09T308 designation confirms the plate geometry and size for straightforward tooling selection. Controlled chip formation and reliable edge performance A single-sided chipbreaker engineered for interrupted and continuous cuts promotes stable chip control and prevents entanglement during heavy-duty turning of grey and nodular cast irons. The cylindrical hole with a one-sided countersink (40°–60°) allows secure fastening and repeatable seat location, supporting process reliability. The insert’s geometry—including the effective 80° profile—balances edge strength and accessibility for external turning, delivering predictable surface quality and reduced need for corrective machining. For tailored recommendations on Tungaloy CPMT09T308 T505 turning inserts and immediate availability, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Manufacturer article number: 6831843 SKU: 6831843-Tungaloy Model series: ISO turning indexable inserts Facts Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 11° Plate size: 09 Included angle: 80° Special features CVD-coated carbide grade T505 Rhombic plate form Single-sided chipbreaker Cylindrical hole + one-sided countersink (40°–60°) Compatible with ISO holders (form, clearance, tolerance, fastening, size, thickness) FAQ Which materials is this insert suited for? The CPMT09T308 T505 insert is engineered primarily for cast iron machining; the T505 grade and the plate geometry support efficient and stable material removal in grey and nodular cast irons. What advantages does the T505 grade offer? Tungaloy’s T505 is a CVD-coated carbide grade offering elevated wear resistance and reliable edge life, which reduces insert changes and supports longer uninterrupted production cycles. Will this plate fit my existing holder? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, plate size and thickness; the CPMT09T308 follows ISO specification for straightforward matching—refer to the SKU 6831843-Tungaloy when checking holder compatibility. What are the key geometric specifications to note? Key values are a 0.8 mm corner radius, 11° clearance angle, 3.97 mm thickness, 09 plate size, and a cylindrical hole with a 40°–60° countersink for secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade engineered for cast iron, a 0.8 mm corner radius for versatile turning, and ISO compatibility for reliable tool interchangeability — order directly via Metav Werkzeuge or consult our specialists for holder matching. CPMT 09T308 T5115 Tungaloy turning insert — ISO rhombic insert for external and internal turning CPMT 09T308 T5115 is an ISO-form indexable insert designed for turning applications, offering a universal grade optimised for cast iron and stable edge performance ISO rhombic insert, size 09 CVD-coated carbide grade T5115 0.8 mm corner radius for versatility Cylindrical hole + 40°–60° countersink Consistent cutting performance tailored to cast iron The combination of a CVD-coated surface and a wear-resistant carbide substrate provides a balanced mix of edge stability and longevity, making this insert particularly effective for cast iron turning. The single-sided chipbreaker controls chip formation and helps maintain stable cutting forces, which in turn reduces vibration and supports consistent dimensional accuracy. With the rhombic geometry and a standard insert angle, these characteristics result in improved process reliability and fewer interruptions during batch production. Interchangeability and secure clamping for predictable set-up Built to ISO norms, the insert enables straightforward interchangeability across compliant holders; compatibility is governed by insert form, the 11° relief, tolerance class, fastening method, size and thickness. The central cylindrical hole with a single-sided countersink (40°–60°) ensures secure mounting and accurate seating, while the 3.97 mm thickness contributes to mechanical rigidity under cutting load. A 0.8 mm corner radius moderates edge strength and surface finish, allowing selection of feeds that balance productivity and final component quality. Productivity gains and lower machining risk Using a universal grade designed for cast iron reduces the need for frequent insert changes and trial-and-error set-ups, delivering steady cycle times and better first-pass yields. The optimised coating technology promotes controlled wear progression and consistent surface integrity, which leads to less rework and a more predictable tool-life profile. In practice, this means fewer unscheduled stops and a steadier flow in production environments where repeatability and uptime matter. For tailored holder recommendations or to secure a batch of the T5115 turning inserts, contact Metav Werkzeuge for an expert assessment and fast delivery — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6864743 Manufacturer SKU: TUN6864743 SKU: 6864743-Tungaloy Manufacturer: Tungaloy Model series: ISO turning inserts Application: Turning Facts ISO designation: 09T308 Size: 09 Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 11° Insert angle: 80° Special features Rhombic insert form CVD-coated carbide, grade T5115 Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Compatible with ISO-compliant holders; mounting depends on form, relief angle, tolerance, fastening, size and thickness FAQ What materials is this insert optimised for? The CPMT 09T308 T5115 Tungaloy turning insert is optimised as a universal grade for cast iron, offering a balance of wear resistance and edge stability for reliable finishing and semi-finishing operations. How does the insert secure to the holder? Secure clamping is achieved via the central cylindrical hole combined with a single-sided countersink (40°–60°); the seating geometry and the 3.97 mm thickness ensure stable contact when used with ISO-compatible holders. What influence does the 0.8 mm corner radius have on machining? A 0.8 mm corner radius increases edge strength and supports higher feed rates while still producing a good surface finish, making it a versatile choice for a range of turning tasks on cast iron. Is the grade suitable for both external and internal turning? Yes, the rhombic form and the grade characteristics make the insert suitable for both external and internal turning where the toolholder geometry accommodates the ISO form. How does the CVD coating improve performance? The CVD coating on the carbide substrate enhances wear resistance and helps maintain edge integrity under varying cutting conditions, resulting in steadier tool life and improved process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 T515 Wendeplatten - Tungaloy
Benefit from the cost-efficiency of the T515 CVD‑coated carbide grade and the broad holder compatibility of the ISO CPMT09T308 form for reliable cast‑iron turning; order directly via Metav Werkzeuge or consult our specialists for selection support. CPMT 09T308 T515 — indexable insert for turning (Tungaloy) The CPMT 09T308 T515 is an ISO‑standard indexable turning insert designed for economical and productive machining of cast iron in external and internal turning applications. CVD-coated carbide grade T515 Optimised for economical cast iron machining ISO form CPMT09T308 for broad holder compatibility Cylindrical hole with single‑side countersink High productivity and predictable tool life for cast‑iron turning The CVD‑coated carbide grade T515 delivers a balance of wear resistance and toughness that suits continuous production on cast iron components. This coating supports stable chip formation and a consistent cutting edge under varying cutting speeds, which contributes to longer tool life and fewer index changes. For workshops prioritising throughput and cost control, the insert’s geometry and coating enable repeatable performance in both finishing and semi‑roughing operations, while the single‑sided chipbreaker aids controlled chip flow and evacuation. ISO conformity and system compatibility reduce setup guesswork Designed to the ISO indexable insert system, compatibility with the toolholder is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic shape and 0.8 mm corner radius suit a range of turning profiles; the insert thickness of 3.97 mm and the 11° clearance angle are key dimensions to check against the chosen holder. The insert features a cylindrical hole with a one‑sided countersink (40°–60°), which matches many common clamping systems. For reliable assembly, pair the insert with a matching external holder or boring bar, a suitable shim/clamp set and the correct replacement screws. Practical recommendations for shop floor application and process safety This insert is optimised for external and internal turning of cast iron and performs best when the chipbreaker and grade are selected to match component rigidity and machining strategy. Use the single‑sided chipbreaker for consistent chip control in continuous cuts; consider stiffer setups and adjusted feeds for interrupted cuts. The 80° approach angle supports good surface finish and effective material removal in typical turning operations. If there is any uncertainty about the correct grade, chipbreaker or holder pairing, Metav Werkzeuge offers technical guidance and specification support to help integrate the insert into an efficient machining process. For tailored advice or to secure original Tungaloy CPMT 09T308 T515 inserts, contact Metav Werkzeuge—technical consultants are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6747829 Manufacturer SKU: TUN6747829 SKU: 6747829-Tungaloy Model series: ISO indexable turning inserts Material: Carbide Grade: T515 Facts Corner radius: 0.8 mm Thickness: 3.97 mm Clearance angle: 11° Approach angle: 80° Size: 09 Special features CVD‑coated carbide grade T515 Rhombic insert form Cylindrical hole with one‑sided countersink (40°–60°) One‑sided chipbreaker Intended use: external and internal turning of cast iron Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness System components: ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws FAQ Which materials is this insert optimised for? The Tungaloy CPMT09T308 T515 insert is optimised for economical machining of cast iron; the CVD‑coated T515 grade provides balanced wear resistance and toughness for stable results on grey and nodular cast irons. How is compatibility with a toolholder ensured? Compatibility depends on matching the insert form, clearance angle, tolerance class, fastening method, size and thickness to the holder specification; check the holder for support of the rhombic CPMT09T308 geometry and the 11° clearance angle. What applications suit the insert best? Typical applications are external and internal turning where chip control and predictable edge life are important; the one‑sided chipbreaker supports continuous cutting and helps maintain surface finish in production environments. How should the insert be mounted and which accessories are required? Mount the insert in a compatible external holder or boring bar using the appropriate shim/clamp set and replacement screws; the cylindrical hole with single‑side countersink (40°–60°) fits common clamping systems. What are the key geometry specifications to consider for setup? Important specs include the 0.8 mm corner radius, 3.97 mm thickness, 11° clearance angle, 80° approach angle and size 09; the SKU for ordering is 6747829‑Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 T6215 Wendeplatten - Tungaloy
Combining a CVD‑coated carbide grade T6215 with an ISO rhombic form yields dependable wear resistance and stable cutting when machining stainless steel under steady to slightly interrupted conditions. Order the insert directly via Metav Werkzeuge or consult the Metav Werkzeuge advisers for help selecting the correct chipbreaker and holder combination. CPMT09T308 T6215 — ISO turning insert CPMT 09T308 for stainless steel by Tungaloy The CPMT09T308 T6215 is an ISO‑standard rhombic turning insert designed for general external and internal turning of stainless steel under stable to lightly interrupted conditions. CVD-coated carbide T6215 Optimised for stainless steel turning ISO-standard rhombic insert, 80° Cylindrical hole with single-sided countersink Longer tool life through specialised coating and grade The combination of a CVD coating and a wear‑resistant carbide substrate in grade T6215 provides enhanced abrasion resistance and consistent performance when turning stainless steel. Chemical vapour deposition (CVD) forms a dense ceramic layer over the carbide that reduces flank wear and maintains the integrity of the cutting edge at moderate cutting temperatures. For production contexts where tool life and predictable replacement intervals matter, this insert reduces unscheduled downtime and supports a steady machining rhythm. Guaranteed fit and system compatibility for predictable processes Supplied in the ISO CPMT format, the insert matches holders according to form, clearance angle, tolerance class, fastening, size and thickness. Key dimensions — 80° included angle, 11° clearance angle, 0.8 mm nose radius and a plate thickness of 3.97 mm — govern clamping and cutting geometry and should be checked against the selected toolholder. The insert’s cylindrical hole with a single‑sided countersink (40°–60°) ensures secure fastening and repeatable positioning in the clamping set. Using components matched to these specifications supports stable cutting forces and reproducible surface finish. Practical guidance for stainless‑steel turning and chip control For stainless‑steel applications, select the one‑sided chipbreaker configuration that corresponds to the part rigidity and feed range; the right chipbreaker promotes consistent chip formation and prevents built‑up edge. The ISO series is best combined with a suitable external holder or boring bar, a correct underlay or clamp set, and the specified replacement screws for safe operation. Choosing the correct chipbreaker and cutting parameters yields improved surface quality and fewer tool changes, translating into measurable productivity gains on the shop floor. Contact Metav Werkzeuge for expert advice on integrating Tungaloy inserts into an existing tool system or to reserve original CPMT09T308 T6215 stock — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6945227 Manufacturer SKU: TUN6945227 Model series: ISO turning inserts Designation: CPMT09T308 Manufacturer: Tungaloy Specifications Nose radius: 0.8 mm Insert thickness: 3.97 mm Included angle: 80° Clearance angle: 11° Insert size: 09 Special features Material: carbide Coating: CVD Shape: rhombic Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning Suitability: stainless steel ISO-standard insert FAQ What materials is this insert designed for? The CPMT09T308 T6215 is designed primarily for machining stainless steel, with the T6215 grade offering wear resistance under stable to lightly interrupted cutting conditions. Which chipbreaker is fitted and why does it matter? This insert features a one‑sided chipbreaker; chipbreaker choice affects chip control and surface finish and should be matched to workpiece rigidity and feed to ensure consistent chips. How does the CVD coating improve performance? The CVD coating forms a hard, thermally stable layer over the carbide substrate that reduces abrasive wear and helps maintain edge geometry, extending tool life in stainless‑steel turning. What specifications are critical when pairing a holder? Key parameters include the 80° rhombic form, 11° clearance angle, insert thickness 3.97 mm, and the hole/countersink style — these determine correct clamping and reproducible cutting geometry. Is this an original Tungaloy product? Yes, this article is listed with the manufacturer article number 6945227 and is supplied as a genuine Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide for extended tool life, a rhombic ISO form for versatile turning, and precise geometries for reliable compatibility with ISO holders — order directly via Metav Werkzeuge or consult our specialists for application support. CPMT 09T308 T6215 indexable turning insert, CVD-coated carbide — Tungaloy CPMT 09T308 T6215 is an ISO-standard rhombic turning insert optimised for external and internal turning of stainless steels, designed for stable to mildly interrupted cuts. CVD-coated carbide for high wear resistance Rhombic ISO form CPMT for versatile turning 11° clearance angle for secure cutting geometry Single-sided chipbreaker, cylindrical hole with countersink Durable coating and substrate for longer tool life The insert combines a CVD-coated surface and a carbide substrate to deliver high wear resistance and consistent edge retention when machining stainless steels. The coating reduces adhesive wear and improves surface finish, while the carbide core maintains edge stability under steady cutting conditions. This results in fewer tool changes and more predictable production cycles, making the insert a cost-effective choice for shops aiming for sustained productivity. Precise geometry for predictable compatibility and clamping Manufactured to ISO-standard dimensions, the rhombic indexable insert offers a defined form, radius and thickness that determine compatibility with holders. The 11° clearance and a corner radius of 0.8 mm provide a balanced cutting edge for finishing and semi-finishing operations. The insert features a cylindrical hole with a single-sided countersink (40°–60°) to ensure stable clamping and repeatable seating; correct matching of holder form, tolerance class and fastening method is essential to achieve the expected cutting performance. Application guidance and efficiency in turning stainless steels With a single-sided chipbreaker tailored to the T6215 grade, this insert controls chip formation during turning and reduces the risk of built-up edge when machining work-hardening alloys. The grade is intended for stable to slightly interrupted conditions and is suitable for both external and internal turning. Selecting feeds and speeds that respect workpiece material and machine rigidity maximises tool life and surface quality — the coating and substrate combination supports consistent results across series production. Contact Metav Werkzeuge for tailored cutting data, availability and to discuss compatibility with specific holders; refer to SKU TUN6945232 when enquiring — Metav Werkzeuge can advise on optimal setup and supply the required clamping sets and replacement screws Technical data Article number: 6945232 Manufacturer SKU: TUN6945232 Model series: ISO-Drehwendeschneidplatten Designation: CPMT09T308 Thickness: 3.97 mm Facts Corner radius: 0.8 mm Clearance angle: 11° Insert size: 09 Insert angle: 80° Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Material: carbide Coating / grade: T6215 (CVD-coated) Shape: rhombic Chipbreaker: single-sided Application: turning (external and internal) System components: ISO insert, compatible external holder or boring bar, backing/clamping set and replacement screws FAQ What materials is this insert best suited for? The CPMT 09T308 T6215 insert is formulated for machining stainless steels and performs well in stable to mildly interrupted turning operations. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure and repeatable seating in compatible ISO holders, improving stability and reducing vibration during cutting. Which chipbreaker type does the insert have and why is it important? This insert features a single-sided chipbreaker; it is designed to control chip formation when turning stainless steels, assisting in evacuation and reducing built-up edge. Is the CPMT 09T308 compatible with existing ISO holders? Compatibility depends on matching the insert form, clearance angle, tolerance class, fastening method, size and thickness; when these align, the insert seats and clamps correctly in standard ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, ISO conformity and precise geometry for reliable turning of stainless steel; order inserts directly via Metav Werkzeuge or consult our technical team for tailored tooling solutions. CPMT 09T308 T6215 — ISO indexable turning insert for turning The CPMT09T308 T6215 is an ISO-format indexable turning insert designed for turning applications, optimised for stainless steel under stable to slightly interrupted cutting conditions CVD-coated carbide grade T6215 ISO rhombic insert, 09 size 0.8 mm corner radius Suitable for stainless steel turning Increased process reliability for serial turning The insert’s CVD-coated carbide composition delivers elevated wear resistance, extending tool life in continuous production. The geometry is engineered for consistent chip control in stable to lightly interrupted cuts, which reduces downtime caused by edge failure and repeated indexing. With an included angle of 80° and an 11° clearance angle, the geometry supports secure engagement and dependable cutting forces, translating to predictable tool performance in moderate-duty turning operations. Reduced setup complexity through ISO conformity As an ISO-standard turning plate, the component integrates with common holders and boring bars when the form, clearance angle, tolerance class, fastening method, size and thickness match. The rhombic shape and 09 size simplify selection across a wide range of external and internal turning tasks. The insert’s 3.97 mm thickness and cylindrical hole with a single-sided countersink (40°–60°) ensure a secure clamping interface and repeatable seating, lowering the risk of assembly errors and thereby improving first-part accuracy. Improved surface quality and tool life for stainless steel For applications in stainless steel, the T6215 grade offers a balance of toughness and abrasion resistance suited to common stainless alloys. The 0.8 mm corner radius supports edge strength while enabling fine surface finishes on turned components; selecting the correct chipbreaker and grade according to workpiece material and machining stability reduces built-up edge and enhances finish consistency. The result is fewer reworks and more parts meeting specification without additional passes. Practical system guidance and application notes The insert is part of a system comprising the ISO indexable plate, a matching external holder or boring bar, a support/shim or clamping kit, and replacement screws. Compatibility depends on matching form factor and tolerances rather than brand alone. For one-off adjustments or process optimisation, choose the chipbreaker and grade that correspond to the specific alloy and cut type; a single-sided chipbreaker is indicated for the supplied geometry to suit conventional turning strategies and moderate feed ranges. For robust stainless steel machining with the Tungaloy T6215 grade, contact Metav Werkzeuge for application advice and to secure the CPMT09T308 insert—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and process optimisation. Technical data Article number: 6945236 Manufacturer SKU: TUN6945236 Brand: Tungaloy Core data Insert designation: CPMT09T308 Grade: T6215 Corner radius: 0.8 mm Clearance angle: 11° Included angle: 80° Thickness: 3.97 mm Size: 09 Special features CVD-coated carbide Rhombic insert geometry Cylindrical hole + single-sided countersink (40°–60°) Single-sided chipbreaker Application: turning Model series: ISO turning indexable inserts Suitable for stainless steel FAQ What applications suit this indexable insert best? The CPMT09T308 T6215 insert is intended for external and internal turning operations, particularly turning stainless steel under stable to slightly interrupted cutting conditions. How does the T6215 grade perform on stainless steel? The T6215 CVD-coated carbide offers a balance of abrasion resistance and toughness, providing improved tool life and surface quality when machining stainless steel with appropriate feeds and depths of cut. Which holders are compatible with this ISO insert? Compatibility depends on the holder matching the insert form, clearance angle, tolerance class, fastening style, size and thickness; the CPMT09T308 sits in standard ISO rhombic holders sized for 09 inserts. What does the hole and countersink specification mean for clamping? The cylindrical hole with a single-sided countersink (40°–60°) ensures stable, repeatable clamping and simplifies replacement with standard screw/clamp kits. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 T9215 Tungaloy Wendeplatten - Tungaloy
Combining CVD-coated carbide (T9215) for high wear resistance with a 0.8 mm corner radius and an 11° relief angle, this insert is optimised for productive medium-steel turning; order the CPMT09T308 directly via Metav Werkzeuge or consult our technical team for cutting data and process parameters. CPMT09T308 T9215 Tungaloy indexable turning insert — CVD-coated carbide, 0.8 mm corner radius The CPMT09T308 indexable insert is a rhombic ISO turning insert designed for productive external and internal turning of medium steels; compatible with ISO holders when matched for form, relief angle, tolerance class, clamping and thickness. CVD-coated carbide grade T9215 Suited for medium steel and light interruption cuts Rhombic shape with 80° edge and 0.8 mm radius Cylindrical hole with single-sided countersink (40°–60°) Productive medium-steel turning with a wear-resistant grade This insert uses the T9215 CVD-coated carbide formulation to combine enhanced wear resistance with fracture toughness, making it a reliable choice for sustained production runs. The coating reduces flank and crater wear under typical turning parameters, extending tool life and reducing tool-change frequency. For operations that demand consistent throughput, the grade supports continuous to lightly interrupted cutting, translating coating and substrate performance directly into lower manufacturing cost per part. Stable edge geometry for consistent surface finish and tool life The rhombic insert geometry and the 0.8 mm corner radius deliver a balance between edge strength and achievable surface finish. A larger corner radius increases edge support for higher feeds, while the 11° relief angle reduces rubbing and stabilises cutting forces. The single-sided chipbreaker controls chip form for medium steels, which simplifies chip evacuation and helps maintain a repeatable surface quality when paired with appropriate cutting data. Mounting, compatibility and practical system setup ISO conformity means the insert integrates into standard ISO holders when the form, relief angle, tolerance class, fastening method, size and thickness are matched. The CPMT09T308 features a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping and simple replacement. The plate thickness of 3.97 mm and the standard 09 size classify it within widely available holder systems, enabling straightforward retrofitting into existing toolrooms without complex adaptations. Operational benefits and selection guidance for production Selecting this grade reduces downtime through longer tool life and stable cutting behaviour; its CVD coating is particularly effective when machining a broad range of steels under stable cutting conditions. When planning inserts, choose a chipbreaker and grade that match the workpiece material and the expected stability of the setup. For mixed-production environments, the combination of toughness and wear resistance in this insert supports predictable performance and repeatable results across batches. Contact Metav Werkzeuge for tailored cutting data, availability and to request sample inserts via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6774027 Manufacturer SKU: TUN6774027 SKU: 6774027-Tungaloy ISO designation: CPMT09T308 Grade/sort: T9215 Material: Carbide Core specifications Plate size: 09 Plate thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 11° Cutting edge angle: 80° Special features Rhombic plate shape Cylindrical hole with single-sided countersink (40°–60°) Single-sided chipbreaker CVD-coated carbide grade T9215 Application: turning ISO-indexable insert series FAQ What materials is this insert intended for? The CPMT09T308 Tungaloy insert with grade T9215 is primarily intended for medium steel machining and performs well in continuous to lightly interrupted cuts. How does the CVD coating affect performance? The CVD-coated carbide surface of the insert improves wear resistance and helps maintain edge integrity, resulting in longer tool life for the CPMT09T308 during standard turning operations. What holders are compatible with this insert? Compatibility depends on matching form, relief angle (11°), tolerance class, clamping method, size (09) and thickness (3.97 mm); the insert fits ISO-indexed turning holders designed for rhombic CPMT plates. Can this insert be used for interrupted cuts? Yes—grade T9215 is suitable for continuous cutting and light interruptions; for heavy interruption, consider a grade or geometry optimised specifically for interrupted cuts. What is the purpose of the cylindrical hole and countersink? The cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and precise seating in the toolholder, facilitating repeatable positioning and quick index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 T9215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide T9215 grade, an ISO-indexable rhombic geometry and secure clamping features for productive, repeatable medium-steel turning. Order the insert directly via Metav Werkzeuge or ask our consultants if further specification guidance is required. CPMT 09T308 T9215 turning insert — Tungaloy The CPMT09T308 T9215 Tungaloy insert is an ISO-indexable turning insert for external and internal turning, optimised for medium-steel applications and suited to continuous to light interrupted cuts ISO-indexable rhombic insert CVD-coated carbide grade T9215 Optimised for medium steel turning Cylindrical hole with countersink Increased productivity through a high‑performance grade The CVD-coated carbide T9215 grade combines elevated wear resistance with high fracture toughness, which translates into extended tool life and fewer insert changes on the shop floor. For operations running long, uninterrupted material removal the hard, wear-resistant coating maintains edge integrity while the robust substrate reduces the risk of chipping under stable conditions. This balance of properties means tangible gains in machining uptime and consistent part output when machining medium‑hard steel alloys. Reliable fit and predictable geometry in ISO systems Designed to the ISO designation 09T308, the rhombic form and the 11° clearance angle ensure consistent engagement with standard holders across ISO turning systems. Compatibility with a holder is determined by shape, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters preserves cutting geometry and repeatability. The standardised form reduces setup uncertainty and helps to maintain dimensional accuracy across serial production runs, simplifying tool‑room planning and inventory management. Secure clamping and efficient chip control for stable cuts The insert’s cylindrical hole with one‑sided countersink (40°–60°) provides positive seating and repeatable clamping force, contributing to vibration damping and stable cutting. A single‑sided chipbreaker and a corner radius of 0.8 mm promote controlled chip formation and evacuation, improving surface finish while protecting the cutting edge under moderate interruptions. The plate thickness (3.97 mm) and rhombic shape combine to give a rigid contact area, supporting higher feeds and steady metal removal rates without compromising process reliability. For reliable medium‑steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for application advice and prompt supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6777772 Manufacturer SKU: TUN6777772 SKU: 6777772-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: CPMT09T308 T9215 Tungaloy-Wendeplatte Material: carbide Facts Corner radius: 0.8 mm Clearance angle: 11° Included angle: 80° Plate thickness: 3.97 mm Size: 09 Special features Grade: T9215 (CVD-coated carbide) Shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) Typical use: medium steel machining System: ISO-indexable insert FAQ What materials is this insert best suited for? The CPMT09T308 T9215 insert is optimised for medium steel machining; the T9215 grade balances wear resistance and toughness for productive results on such materials. How does the CVD coating affect performance? A CVD-coated carbide layer on the CPMT09T308 T9215 provides improved thermal and abrasive wear resistance, extending edge life under continuous cutting conditions and enabling higher sustained cutting speeds. Which holder parameters must match for correct fit? Compatibility depends on the insert form, clearance angle (11°), tolerance class, fastening method, size and thickness; keeping these aligned with the holder ensures repeatable seating and geometry. Is the insert suitable for interrupted cuts or only continuous cutting? The T9215 grade is intended primarily for continuous to light interrupted cuts; it offers fracture resistance for occasional interruptions but is optimised for stable, productive cutting. Why does the hole and countersink geometry matter? The cylindrical hole with a one‑sided countersink (40°–60°) on the CPMT09T308 ensures secure clamping and accurate seating, which reduces vibration and maintains consistent cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 T9215 Wendeplatten - Tungaloy
Combine the high wear resistance of the T9215 CVD‑coated grade with a robust R0.8 cutting edge and ISO rhombic geometry for stable, productive turning of medium steels; order directly via Metav Werkzeuge or consult our specialists for application matching. CPMT09T308 T9215 CPMT — Turning insert, CVD‑coated carbide, R0.8 (Tungaloy) The CPMT09T308 T9215 is an ISO rhombic turning insert designed for medium‑steel machining, offering a single‑sided chipbreaker and secure clamping via a cylindrical hole with one‑sided countersink. CVD‑coated carbide grade T9215 Rhombic ISO size 09, R0.8 11° clearance angle Cylindrical hole with one‑sided countersink Improved productivity for medium‑steel turning The ISO‑format insert combines a CVD‑coated cutting surface with a carbide substrate to balance wear resistance and fracture toughness for sustained machining. The chosen grade, T9215, is optimised for medium steel, enabling longer uninterrupted runs and reliable performance in continuous and light interrupted cuts. For production environments the result is fewer indexings and reduced tool change frequency, which translates directly into higher process throughput and predictable cycle times. Robust geometry for consistent surface quality The insert’s R0.8 corner radius and 11° clearance reduce edge chipping while maintaining cutting engagement, supporting a consistent surface finish on turned components. The rhombic form permits both external and internal turning when mounted in a compatible holder, and the 3.97 mm thickness gives the insert the rigidity required to resist vibration under moderate feeds. The single‑sided chipbreaker controls chip flow to prevent entanglement and to aid continuous chip evacuation, which helps to protect the workpiece and toolholder from unexpected damage. Secure clamping and easy holder compatibility Compatibility with a toolholder is determined by insert form, relief geometry, tolerance class, clamping method, nominal size and thickness. This insert features a cylindrical hole with a one‑sided countersink (40°–60°) for positive, repeatable clamping and quick indexability. Selecting the matching chipbreaker style and the T9215 grade for the correct cutting data ensures economical cutting tool life and consistent component quality. For tailored recommendations on holder selection and cutting parameters, the technical advisers at Metav Werkzeuge provide practical support and documented cutting data. For application‑specific advice on Tungaloy turning inserts such as the CPMT09T308 T9215, please contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and fast availability Technical data Article number: 6777813 Manufacturer SKU: TUN6777813 SKU: 6777813-Tungaloy Model series: ISO turning inserts Material: carbide Core data Corner radius: R0.8 mm Clearance angle: 11° Thickness: 3.97 mm Size: 09 Nominal angle: 80° Countersink angle: 40°–60° Special features ISO designation: CPMT09T308 Grade/coating: T9215, CVD‑coated carbide Shape: rhombic Chipbreaker: single‑sided Hole: cylindrical hole with one‑sided countersink Application: turning — external and internal; continuous to light interrupted cuts FAQ Is this insert suitable for interrupted cuts? The CPMT09T308 T9215 insert is designed for continuous and light interrupted cuts; for heavy interruptions a different grade or chipbreaker may be preferable. Which materials is this grade best for? The T9215 CVD‑coated grade is optimised for medium steels, offering a balance of wear resistance and fracture toughness for productive machining. How does the hole and countersink affect clamping? The cylindrical hole with a one‑sided countersink (40°–60°) ensures repeatable clamping and stable positioning in compatible toolholders, improving repeatability of the insert seating. Can this insert be used for both external and internal turning? Yes, the rhombic geometry permits both external and internal turning operations when paired with a suitable holder and correct cutting data. What should be considered when selecting a chipbreaker? Select the chipbreaker according to material, cutting mode and stability; this insert’s single‑sided chipbreaker supports controlled chips in typical turning of medium steels. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 09T308 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide (T9215) and ISO-standard geometry for high productivity and consistent tool life in turning operations; order the CPMT09T308 T9215 Tungaloy indexable insert directly via Metav Werkzeuge or consult the team for application advice. CPMT09T308 09T308 T9215 — Turning indexable insert by Tungaloy CPMT09T308 T9215 Tungaloy is an ISO-standard rhombic indexable insert designed for general turning, optimised for medium steel and continuous to light interrupted cuts. CVD-coated carbide T9215 grade ISO rhombic insert for reliable fit 0.8 mm corner radius for fine finishes Cylindrical hole with 40°–60° countersink Boosted productivity for medium steel turning The T9215 grade is a CVD-coated carbide developed to balance wear resistance and fracture toughness, making it particularly effective for medium steel machining where both surface quality and tool life matter. In continuous or slightly interrupted cuts, the combination of coating and substrate reduces flank wear and extends productive intervals between index changes. The result is a measurable improvement in process stability and a lower cost per component when used with appropriate tooling systems. Precision fit and secure clamping for repeatable results Designed to the ISO indexable insert format, the geometry and hole configuration ensure compatibility with a wide range of holders when matched by form, clearance angle and tolerance class. The cylindrical hole with single-sided countersink (40°–60°) provides secure axial location and consistent clamping force, which reduces micro-movement under load and preserves geometric repeatability. This stability translates directly into more consistent dimensional tolerances and fewer unplanned interventions at the machine. Application-specific advantages and recommended machining strategy The rhombic shape with an included angle of 80°, a 0.8 mm corner radius and a clearance angle of 11° offers a good compromise between strength and edge sharpness. The single-sided chipbreaker is suited to general-purpose turning and aids controlled chip formation on common steels, improving surface finish and evacuation. For best results use the insert together with an appropriately rated external holder, shim or clamping kit and the correct screw set; this insert is optimised for external and internal turning where stable cutting conditions are available. Contact Metav Werkzeuge for tailored advice on toolholders, recommended cutting parameters and applicability of the CPMT09T308 T9215 insert to specific components and machines Technical data Article number: 6773962 Manufacturer SKU: TUN6773962 SKU: 6773962-Tungaloy Designation: CPMT09T308 ISO code: 09T308 Data Corner radius: 0.8 mm Clearance angle: 11° Included angle: 80° Thickness: 3.97 mm Size: 09 Special features Material: carbide Coating: CVD Chipbreaker: single-sided Hole: cylindrical hole + single-sided countersink (40°–60°) Shape: rhombic Application: turning; suited to medium steel; optimised for continuous to light interrupted cuts FAQ Is this insert suitable for interrupted cuts? The T9215 grade provides increased fracture resistance and is suitable for continuous to light interrupted cuts; for heavy interruptions select a geometry and grade tailored to intermittent loading. Which materials can the insert machine effectively? This insert is optimised for medium steel machining; the CVD coating and substrate combination balance wear resistance and toughness for productive steel turning. What should be considered when choosing a holder? Compatibility depends on form, clearance angle, tolerance class, fastening and insert size; using an ISO-compatible holder with correct clamping parts ensures repeatable positioning of the insert. How does the 0.8 mm corner radius affect surface finish? A 0.8 mm radius supports improved edge strength while still permitting a fine surface finish; increasing radius improves edge life but may raise cutting forces. Does the insert include clamping hardware? The offer concerns the indexable insert itself; clamping sets, underlays and screws are part of the system and should be selected to match the holder and application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 T9225 Wendeplatten - Tungaloy
A robust, CVD‑coated carbide insert in Tungaloy's T9225 grade delivers reliable performance for medium–heavy steel turning with consistent chip control; the ISO CPMT09T308 geometry, 0.8 mm corner radius and 11° clearance ensure stability and repeatable results—order directly via Metav Werkzeuge or consult our specialists for holder compatibility. CPMT 09T308 T9225 — Tungaloy turning insert, CVD‑coated carbide, rhombic 09 (80°) The CPMT09T308 T9225 Tungaloy insert is an ISO‑standard rhombic turning insert designed for medium to heavy turning operations where toughness and secure clamping are essential. CVD-coated carbide grade T9225 ISO rhombic 09 geometry, 80° cutting angle Cylindrical hole with 40°–60° countersink Universal grade for medium–heavy steel turning High-efficiency cutting for reliable production The ISO‑format CPMT09T308 insert in T9225 grade combines wear resistance and toughness for medium–heavy steel turning, delivering predictable tool life even under variable engagement. The CVD‑coating increases thermal stability and reduces flank wear, while the carbide substrate maintains edge integrity during intermittent cuts. The rhombic 09 form with an 80° approach reduces cutting‑force peaks and facilitates smooth indexing, so machining cycles remain consistent and downtime is reduced. Secure clamping and straightforward integration with holders Designed for simple integration into standard turning systems, the insert's compatibility is governed by form, 11° clearance, tolerance class, fixation and thickness. The plate thickness of 3.97 mm and the cylindrical hole with one‑sided countersink (40°–60°) ensure secure fastening and repeatable seating in the clamp. Select the appropriate holder, shim and screw set to match the insert geometry; chipbreaker and grade choice should follow the workpiece material and machining stability to optimise cutting results. Robust geometry for balanced finish and tool life The 0.8 mm corner radius provides a compromise between strength and surface finish, making the insert suitable where both durability and adequate workpiece finish are required. The single‑sided chipbreaker promotes reliable chip control on a broad range of steels and reduces the risk of built‑up edge under interrupted cuts. As an ISO‑standard indexable plate, it enables quick rotation to fresh edges and supports efficient tool inventory management for high‑mix production environments. For assistance selecting the correct holder combination or to order the Tungaloy CPMT09T308 T9225 insert for immediate delivery, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and rapid dispatch. Technical data Article number: 6781482 Manufacturer SKU: TUN6781482 SKU: 6781482-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 11° Cutting angle: 80° Size: 09 Special features Material: CVD‑coated carbide Grade: T9225 Plate form: rhombic Hole: cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: one‑sided Application: Turning FAQ What materials is this insert suitable for? The CPMT09T308 T9225 insert is optimised for steel machining; the T9225 CVD‑coated carbide grade is formulated for robust performance in medium to heavy steel turning operations. How does the CVD coating affect performance? CVD‑coating on the carbide substrate increases thermal resistance and reduces flank wear, which helps the Tungaloy turning insert to maintain edge life and process stability under higher temperatures and variable engagement. Which clamping features ensure secure seating? The insert features a cylindrical hole with a one‑sided countersink (40°–60°) and a 3.97 mm plate thickness, ensuring secure clamping and repeatable seating in compatible holders for the CPMT09T308 geometry. What chip control can be expected with this grade and chipbreaker? With a single‑sided chipbreaker and the universal T9225 grade, the insert offers stable chip formation and evacuation across a broad range of steel grades, particularly beneficial for interrupted cuts or changing entry conditions. Is this an ISO‑standard geometry and how many indexable edges are available? The CPMT09T308 is an ISO‑standard rhombic 09 insert with multiple indexable edges; the rhombic form and 80° approach support accessible indexing and predictable cutting forces for turning operations. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 0.8 mm corner radius for stable engagement and the universal T9225 grade for robust mid-to-heavy steel turning; order the CPMT09T308 T9225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT 09T308 09T308 T9225 Turning insert (Tungaloy) — CVD-coated carbide, 0.8 mm radius CPMT09T308 T9225 is a rhombic ISO turning insert designed for medium to heavy steel turning, compatible with ISO holders and boring bars CVD-coated carbide for durability Universal grade T9225 for steel turning 0.8 mm corner radius for stable engagement ISO 09 rhombic insert with cylindrical hole Engineered for consistent metal removal and longer tool life The CVD-coated carbide construction and the T9225 grade provide a balance of wear resistance and toughness that is optimised for medium to heavy steel machining. The coating reduces flank wear under sustained cutting, while the substrate grade is designed to handle variable engagement and mildly interrupted cuts without premature chipping. For production environments, this combination translates into longer effective tool life and fewer insert changes, supporting a smoother workflow and predictable machining cycles. Geometry and clamping that improve stability and control The rhombic geometry and 80° included angle give the insert favourable edge engagement for external and internal turning, while the 0.8 mm corner radius reduces local edge loading to help prevent vibration and edge breakage. The 11° relief angle and the insert’s mounting interface — with cylindrical hole and single-sided countersink (40°–60°) — ensure secure locating and repeatable clamping in standard ISO holders. The CPMT09T308 insert’s features together reduce the risk of incorrect seating and minimise setup-related downtime, which is advantageous in serial production and shop-floor changeovers. Integration into a reliable turning system for controlled chips This ISO rhombic insert is intended to be used as part of a system: an appropriate external holder or boring bar, a matching shim/clamping set and spare fastening screws complete the assembly. The one-sided chipbreaker promotes effective chip control for typical turning operations and reduces the chance of tangling or workpiece damage. In practice, choosing the correct chipformer and grade for the material and stability of the setup will lead to safer machining conditions and a cleaner surface finish, particularly when machining bars or bores where chip evacuation is critical. Practical selection guidance for variable and interrupted cuts The T9225 universal grade is specified for robustness under changing cutting conditions; it is a good first choice when facing mixed batches or partially interrupted cuts where toughness is required alongside wear resistance. Selecting the correct chipbreaker and matching the insert to a rigid holder will improve tool life and machining economy, often reducing total tooling costs per part. If process parameters vary significantly, consider slightly reduced depths of cut or increased feed to maintain edge security until full process parameters are validated. For secure medium to heavy steel turning, specify the Tungaloy CPMT09T308 T9225 insert and contact Metav Werkzeuge for tailored application advice and fast procurement: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany; info@metav-werkzeuge.com; +49 2822 7131930 Technical Data Manufacturer article number: 6781007 SKU: 6781007-Tungaloy Manufacturer SKU: TUN6781007 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Numbers / Core technical data Corner radius: 0.8 mm Relief angle: 11° Plate thickness: 3.97 mm Insert size: 09 Included angle: 80° Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features / Materials Material: carbide Coating: CVD-coated Grade: T9225 (robust universal grade) Chipbreaker: one-sided chipbreaker Plate shape: rhombic Mounting: with hole (cylindrical + countersink) Application: turning (external and internal) Typical use: medium to heavy steel turning, changing engagement, light interrupted cuts System components: compatible holder, shim/clamping set, spare screws FAQ What clamping interface is required for this insert? The CPMT09T308 T9225 insert is designed for ISO-style holders using a cylindrical hole with a single-sided countersink (40°–60°); secure clamping is achieved with the matching shim and screw arrangement. Which materials is this insert optimised for? This Tungaloy indexable insert is optimised for medium to heavy steel machining; the CVD-coated carbide and T9225 grade provide a compromise of wear resistance and toughness for such work. How does the 0.8 mm corner radius affect cutting performance? The 0.8 mm radius reduces local stress on the cutting edge, improving stability and resistance to chipping; it is beneficial where slightly heavier engagement or mild vibration is expected. Is this insert suitable for interrupted cuts? Yes — the T9225 grade is formulated for robust performance under changing engagement and light interrupted cuts; however, process stability and holder rigidity should be assessed before full-volume production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 T9225 Wendeplatten - Tungaloy
Robust CVD-coated T9225 grade delivers enhanced toughness for medium to heavy steel turning, while the rhombic ISO geometry with an 0.8 mm corner radius and 11° clearance ensures dependable edge strength and consistent chip control; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and supply. CPMT 09T308 T9225 CPMT — Turning insert by Tungaloy CPMT09T308 T9225 Tungaloy insert designed for ISO-compliant external and internal turning with a robust, universal grade for variable cutting conditions CVD-coated carbide grade T9225 for toughness ISO rhombic insert with 11° clearance Single-sided chipbreaker and cylindrical hole Suitable for medium to heavy steel turning High-performance grade for demanding steel turning The CVD-coated T9225 grade is formulated for a balance of wear resistance and toughness, making it particularly effective in medium to heavy steel turning where occasional interrupted cuts occur. The coating enhances thermal stability while the underlying carbide substrate maintains a stable cutting edge, which results in longer service intervals and fewer tool changes. This combination improves process reliability and supports higher material removal rates without sacrificing surface integrity. Reliable geometry and secure clamping for consistent results Built to ISO dimensions, the rhombic form and the specified geometry simplify tool selection across machining systems. The insert features a 3.97 mm plate thickness and a cylindrical hole with one-sided countersink (40°–60°) to ensure precise seating in compatible holders and a secure clamp fit. The standardised form factor reduces setup time and allows straightforward replacement, while the 11° clearance contributes to lower friction and improved tool life in through-feed and profiling operations. Improved chip control and predictable edge life A single-sided chipbreaker matched to the 0.8 mm corner radius provides controlled chip formation under a variety of feed rates, which reduces the risk of entanglement and supports stable machining in both external and internal passes. The robust edge geometry reduces flank wear in heavy cuts and produces a consistent surface finish, helping to lower downstream inspection and rework. The combination of chip control and material grade supports repeatable cycle times and predictable part quality. Practical system integration and application guidance The insert forms part of a modular system consisting of the ISO indexable plate, a compatible external holder or boring bar, a clamping seat and replacement screws. Selection of the correct chipbreaker and grade should be driven by workpiece material, machining stability and the intended cutting parameters. For workshops seeking a pragmatic balance between durability and economy, this insert offers broad applicability and straightforward inventory management as an ISO-standard component. For reliable holder compatibility or to request supply of the CPMT09T308 T9225 insert, contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781290 Manufacturer SKU: TUN6781290 SKU: 6781290-Tungaloy Name: CPMT09T308 T9225 Tungaloy-Wendeplatte Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Clearance angle: 11° Thickness: 3.97 mm Size: 09 Angle: 80° Special features CVD-coated carbide grade T9225 Rhombic plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO-indexable turning insert Suited to external and internal turning Robust universal grade for variable cutting conditions FAQ What materials is this insert suitable for? The CPMT09T308 T9225 insert is optimised for steel machining, particularly medium to heavy steel; the CVD-coated carbide grade supports demanding turning tasks. Can the insert be used for interrupted cuts? Yes, the T9225 grade and reinforced edge geometry make the insert suitable for lightly interrupted cuts and varying engagement conditions. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance, tolerance class, clamping method, size and thickness; check the holder specification against the ISO geometry of the CPMT09T308 insert. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius balances edge strength and surface finish, improving tool life in heavier cuts while maintaining acceptable part quality. Is the chipbreaker suitable for both external and internal turning? The single-sided chipbreaker is designed to offer reliable chip control in both external and internal turning when matched with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T308 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD-coated carbide T9225 grade and a precise rhombic CPMT geometry to ensure stable chip control and extended tool life in medium to heavy steel turning; order the CPMT09T308 T9225 turning insert directly via Metav Werkzeuge or consult the technical team for application support. CPMT09T308 T9225 Tungaloy turning insert — ISO rhombic insert for turning The CPMT09T308 T9225 is an ISO rhombic turning insert engineered for medium to heavy steel turning where interrupted cuts or variable engagement demand enhanced toughness and reliable chip formation CVD-coated carbide T9225 for high toughness ISO rhombic CPMT geometry, 80° cutting angle 0.8 mm nose radius for robust surface finish Cylindrical hole with 40°–60° countersink High productivity through a tough CVD-coated grade The CVD-coated T9225 grade offers a balance of wear resistance and toughness well suited to demanding steel machining. Chemical vapour deposition forms a thin, adherent coating that protects the substrate during high-temperature contact, which reduces flank wear and extends edge life. For operations where cutting conditions vary or the cut is lightly interrupted, this carbide grade maintains edge integrity longer than uncoated counterparts, enabling fewer tool changes and a more economical production flow. The improved resistance to crater wear translates directly into consistent part quality and predictable tool-change intervals. Stable cutting behaviour and improved surface quality The rhombic CPMT geometry and the 80° approach angle provide a secure cutting profile for external and internal turning. A 0.8 mm nose radius contributes to a robust cutting edge and a reliable surface finish, while the 11° relief ensures appropriate clearance during tangential engagement. The insert’s one-sided chipbreaker helps form manageable chips in steel machining, reducing re-cutting and improving process stability. These geometric choices reduce vibration sensitivity and support higher material removal rates when paired with a suitable holder and machining parameters, so throughput and component consistency both improve. Practical system compatibility and safe clamping Supplied as an ISO-standard insert, compatibility with the toolholder is determined by form, relief angle, tolerance class, fastening method, size and thickness. The insert is designed with a cylindrical hole plus a 40°–60° countersink, facilitating repeatable clamping and straightforward replacement. The system comprises the ISO insert, matching external holder or boring bar, a backing pad or clamp kit and replacement screws; this modular approach simplifies spare-part planning. Clear identification of size (09), thickness (3.97 mm) and hole style reduces setup time and supports consistent, safe fixation in production environments. For application guidance or to secure CPMT09T308 T9225 inserts from Tungaloy for improved steel-turning performance, contact Metav Werkzeuge—info@metav-werkzeuge.com or +49 2822 7131930—for personalised recommendations and ordering. Technical Data Article number: 6781454 Manufacturer SKU: TUN6781454 Item label: CPMT09T308 T9225 Tungaloy-Wendeplatte Facts Insert size: 09 Cutting angle: 80° Nose radius: 0.8 mm Relief angle: 11° Thickness: 3.97 mm Special features CVD-coated carbide T9225 Rhombic insert shape (CPMT) One-sided chipbreaker Cylindrical hole + one-sided countersink (40°–60°) ISO-standard turning insert Application: turning (external and internal) FAQ What materials is this insert suitable for? The CPMT09T308 T9225 insert is intended primarily for steel machining; the T9225 grade is formulated for medium to heavy steel turning where toughness is required. Can the insert cope with interrupted cuts? Yes. The CVD-coated T9225 grade and the robust rhombic geometry of the insert provide the toughness needed for lightly interrupted or variable engagement cutting conditions. How is the insert fixed in the holder? The insert uses a cylindrical hole with a 40°–60° countersink for secure clamping; compatibility depends on holder form, tolerance class and fastening method. Which chip formation can be expected with this insert? The one-sided chipbreaker is designed to promote stable chip control in steel turning, reducing the risk of long, stringy chips and supporting uninterrupted production. Is this insert compatible with ISO holders? Yes. The CPMT09T308 is an ISO-standard rhombic insert; compatibility is confirmed by matching shape, size, thickness and fastening arrangement with the holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T312 T5115 CM Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide and a proven chipbreaker to achieve steady machining of cast iron; the geometry ensures secure clamping and consistent edge life. Order the insert directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. CPMT 09T312 T5115 — ISO turning insert for turning applications, CVD-coated carbide, Tungaloy The CPMT09T312-CM T5115 is an ISO-indexed turning insert engineered for external and internal turning of cast iron components, offering a balance of wear resistance and cutting-edge stability. ISO rhombic insert CPMT 09 size CVD-coated carbide grade T5115 Balanced wear resistance and edge stability Cylindrical hole with 40°–60° countersink Consistent performance for cast iron turning The insert is manufactured from carbide with a CVD coating, delivering a combination of abrasion resistance and thermal stability that suits continuous production. The T5115 grade is a universal choice for cast iron, offering an effective compromise between hardness and edge robustness; this results in longer usable life and reduced tool changes. Because the coating reduces adhesion and improves heat resistance, operators can maintain steady cutting parameters and benefit from reliable component quality even in repetitive turning tasks. Geometry and chip control that reduce downtime Designed in a rhombic form with an 80° approach and a 1.2 mm corner radius, the insert promotes stable contact conditions and predictable tool forces. The CM chipbreaker is optimised for chip formation in grey and nodular cast iron, producing controlled, short chips that clear the cutting zone reliably. A cylindrical hole with a 40°–60° one-sided countersink enables secure clamping and repeatable seat positioning, which helps maintain consistent surface finish and reduces the risk of insert slippage — a direct contribution to higher machine uptime and process security. System compatibility and practical advantages As an ISO-standardised indexable insert, compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the insert is intended for use with suitable external holders or boring bars together with an appropriate shim/clamping set and replacement screws. The geometry and 3.97 mm plate thickness provide a robust contact area for moderate to heavy cuts, while the universal grade supports both roughing and finishing passes in many cast-iron machining applications. The product is supplied with a clear article identity for traceability and easy stock management in production environments. Contact Metav Werkzeuge today to discuss whether the Tungaloy CPMT09T312-CM in T5115 grade suits a specific cast‑iron turning task; our technical advisors can recommend holders, cutting data and inventory options — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864744 SKU: 6864744-Tungaloy Manufacturer SKU: TUN6864744 Model series: ISO turning indexable inserts Designation: CPMT09T312-CM Facts Corner radius: 1.2 mm Clearance angle: 11° Insert size: 09 (inscribed circle) Thickness: 3.97 mm Angle: 80° Special features CVD-coated carbide Grade: T5115 Chipbreaker: CM Shape: rhombic Hole: cylindrical hole with one-sided countersink (40°–60°) Application: external and internal turning of cast iron System composition: ISO insert with matching holder, shim/clamp set and replacement screws FAQ What materials is this insert suitable for? The CPMT09T312-CM T5115 insert is optimised for cast iron machining; the T5115 grade and CVD coating balance wear resistance and edge stability for consistent results. How does the CM chipbreaker affect chip control? The CM chipbreaker on the Tungaloy turning insert produces short, controllable chips in cast iron, aiding evacuation and reducing the likelihood of chip entanglement in turning operations. What does the cylindrical hole with countersink provide? The cylindrical hole with a 40°–60° one-sided countersink ensures secure seating and repeatable clamping for the CPMT09T312-CM insert, improving positional stability during heavy cuts. Is the insert compatible with standard ISO holders? The CPMT09T312-CM is ISO-standardised; compatibility requires matching holder form, clearance angle, tolerance class, fastening method, size and thickness to ensure correct seating and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 120408 AH8005 Wendeplatten - Tungaloy
Take advantage of a highly wear-resistant, PVD-coated carbide grade combined with a compact rhombic CPMT 120408 geometry and a 0.8 mm corner radius for consistent parting, grooving and turning performance. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. CPMT 120408 AH8005 indexable insert for turning, parting and grooving — Tungaloy The CPMT 120408 AH8005 is a rhombic indexable insert designed for stable turning, parting-off and grooving operations in demanding materials. PVD-coated carbide AH8005 for wear resistance Rhombic CPMT 12 size, 4.76 mm thickness 0.8 mm corner radius for edge strength Cylindrical hole + single-sided countersink 40°–60° Consistent edge life for stable production The combination of the AH8005 grade and PVD-coated surface provides improved wear resistance when machining heat-resistant alloys and other hard materials. This results in a more predictable tool life and fewer unexpected tool changes, which supports continuous production. The rhombic geometry with a 0.8 mm radius balances edge strength and cutting precision, making the insert suitable for both finishing and modest finishing passes without frequent interruptions. Engineered for demanding materials and processes Optimised for machining high-temperature alloys and hard workpieces, the insert’s PVD coating lowers flank and crater wear under elevated cutting temperatures. The model family design targets systemised parting-off and grooving tasks with defined chip control; the single-sided chipbreaker promotes predictable chip flow during stable cutting conditions. When paired with appropriate holders from the same system family, operators can achieve reproducible results across batch runs. Practical geometry and secure fastening The insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping in standard holders, reducing the risk of movement under cut. The 12 mm size and 4.76 mm thickness offer compatibility with common CPMT holders within the TungCut system family. Clear identification on the insert and consistent seating geometry simplify tool changes on the shop floor, aiding maintenance routines and reducing setup time. Improve process reliability and productivity Adopting the TungCut system with this PVD-coated carbide insert can enhance process security by reducing variability and supporting higher productive uptime. The insert’s wear properties are intended to give operators consistent surface finish quality and repeatability across series production. For operations focused on throughput and repeatable results, this insert provides a practical balance of robustness and cutting performance. Contact Metav Werkzeuge for tailored application advice or to request the CPMT 120408 AH8005 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6747765 Manufacturer SKU: TUN6747765 Model series: TungCut Material: carbide Coating/grade: AH8005 (PVD) Facts Insert designation: CPMT 120408 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 80° Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Rhombic insert shape Single-sided chipbreaker With hole for secure clamping System family for parting, grooving and turning Suited to heat-resistant alloys and hard materials PVD-coated carbide for wear resistance FAQ Which materials is this insert suitable for? The CPMT 120408 AH8005 insert from Tungaloy is designed for heat-resistant alloys and hard materials and performs well in stable machining conditions. How does the AH8005 grade affect tool life? The AH8005 PVD-coated carbide grade reduces wear at elevated temperatures, which helps to extend the cutting edge life and sustain consistent performance. Can the insert be used for both parting and grooving operations? Yes; the TungCut system family and the rhombic CPMT 120408 geometry are intended for parting-off and grooving as well as general turning tasks. What clamping features should the holder provide? A holder compatible with CPMT inserts that secures the insert via the cylindrical hole and countersink (40°–60°) ensures rigid clamping and repeatable seating for reliable machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com