CPMT 120408 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated AH8015 grade for heat‑resistant alloys, an 80° approach angle and a 0.8 mm corner radius that together ensure stable cutting and reproducible parting results; order the insert directly via Metav Werkzeuge or contact our consultants for application support. CPMT 120408 AH8015 indexable insert for Turning — 80° approach, PVD-coated (Tungaloy) The CPMT120408 AH8015 is a rhombic indexable insert engineered for precise parting, grooving and stepover cutting in turning operations, optimised for use in the TungCut system family. PVD-coated carbide grade AH8015 Rhombic insert, 12 mm size 80° approach angle for precise cutting Single-sided chipbreaker with centre hole Reliable machining of heat‑resistant alloys and long tool life The combination of the AH8015 grade and a thin PVD coating delivers an even balance between wear resistance and edge stability, making the insert particularly suited to turning tasks with heat‑resistant alloys. The coated carbide substrate reduces flank wear under elevated temperatures and maintains a sharp cutting edge for longer tool life. For production environments this translates into fewer index changes, more consistent component tolerances and improved process uptime. Secure clamping and consistent chip control for repeatable results A rhombic plate form with a 12 mm size, 4.76 mm thickness and a 0.8 mm corner radius provides predictable cutting geometry for fine parting and narrow groove work. The single-sided chipbreaker is designed to form controllable chips on expected feed ranges, while the cylindrical hole with a one‑sided countersink (40°–60°) ensures firm seating and minimal micro‑movement in the pocket. These features reduce vibration and support repeatable surface finish and dimensional accuracy in series production. System compatibility and operational flexibility with TungCut As part of the TungCut system family, the insert integrates with dedicated holders, clamps and stechplates to simplify set‑up and changeover. The combination of the 80° approach angle and the insert geometry allows operators to adjust cutting width and depth efficiently, covering external and internal parting, as well as standard grooving tasks. The system orientation supports cost‑effective machining by enabling straightforward inventory management and fast replacement cycles. For application advice or to secure supply of Tungaloy CPMT120408 AH8015 inserts, contact Metav Werkzeuge for tailored technical support and ordering — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930. Technical data Article number: 6747766 Manufacturer SKU: TUN6747766 Supplier SKU: 6747766-Tungaloy Model series: TungCut Application: Turning Dimensions & angles Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 11° Approach angle: 80° Material & features Material: Carbide Coating / Grade: PVD, AH8015 Shape: Rhombic Hole: Cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: Single-sided FAQ Is this insert suitable for machining heat‑resistant alloys? The CPMT120408 AH8015 insert from Tungaloy is designed for general machining of heat‑resistant alloys; the AH8015 PVD grade provides an effective compromise between wear resistance and cutting edge robustness for turning and parting tasks. Which holders and clamps are compatible with this geometry? The insert matches TungCut system holders and clamp elements made for CPMT120408 geometry; ensure the toolholder accepts a 12 mm rhombic plate with a central hole and 80° approach for correct seating. How does the chipbreaker influence chip formation? The single‑sided chipbreaker on this insert promotes predictable chip shapes at the intended feeds, aiding evacuation in parting and narrow‑groove operations and contributing to consistent surface quality. What clamping considerations apply to the countersunk hole? The cylindrical hole with one‑sided countersink (40°–60°) is intended for secure clamping in the TungCut pocket; correct clamp selection prevents tilt and ensures repeatable cutting performance with the CPMT120408 AH8015. Can the insert be used for both external and internal grooving? Yes — the geometry and grade are suitable for external and internal parting and grooving within the capabilities of the chosen holder and machine setup, offering flexibility across several turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 120408 AH905 Wendeplatten - Tungaloy
Benefit from a PVD-coated AH905 grade that delivers wear- and break-resistance together with a precise 0.8 mm corner radius for accurate parting operations; order the insert via Metav Werkzeuge or contact our specialists for tailored advice. CPMT120408 AH905 turning insert by Tungaloy — PVD-coated carbide, rhombic 12 mm, 80° CPMT120408 AH905 is an indexable turning insert engineered for grooving, parting and plunge turning within the TungCut system family, combining a sharp cutting edge with robust process security. PVD-coated AH905 grade for wear resistance Rhombic 12 mm plate with 80° cutting edge 0.8 mm corner radius for precise parting Cylindrical hole with countersink for secure clamping Durable cutting edge for uninterrupted production The CPMT120408 AH905 insert uses a PVD-coated carbide substrate designed to resist flank wear and minimise edge chipping, which translates into longer tool life and fewer production stops. The coating supports a consistently sharp cutting edge that maintains dimensional accuracy during repetitive parting and grooving operations. By choosing a wear-resistant grade, process reliability increases and tool-related downtime falls, improving overall machining throughput. Precise geometry that enhances dimensional control The rhombic 12 mm plate form and 80° cutting angle provide a stable cutting interface for narrow groove creation and controlled parting. The 0.8 mm corner radius balances edge strength with the ability to achieve fine features, while the 11° relief angle reduces rubbing and heat generation. These geometric characteristics make the insert especially suitable where repeatable feature size and surface integrity are priorities, allowing machining parameters to be optimised for both quality and cycle time. System compatibility and secure clamping for predictable results Designed as part of the TungCut system family, the insert integrates with compatible holders, blades and clamping elements to create a stable assembly for external and internal operations. The cylindrical hole with a one-sided countersink (40°–60°) ensures reliable seating and repeatable positioning in the cutter body. A single-sided chipbreaker assists chip control during parting and plunge cutting, reducing the risk of entanglement and supporting safer, more efficient chip evacuation. For detailed application recommendations for this Tungaloy TungCut insert or to arrange supply through Metav Werkzeuge, contact Metav Werkzeuge’s technical team for fast, application-focused support. Technical data Manufacturer article number: 6879346 SKU: 6879346-Tungaloy Manufacturer SKU: TUN6879346 Model series: TungCut Designation: CPMT120408 Facts Plate size: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 11° Cutting angle: 80° Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Material: carbide Coating: AH905 (PVD) Plate form: rhombic Chipbreaker: single-sided Application: turning — grooving, parting, plunge turning System construction: holders/blades/clamping elements FAQ What operations is this insert designed for? The CPMT120408 AH905 insert is intended for grooving, parting and plunge turning within the TungCut system family and is engineered to provide a sharp edge and process security in these applications. Which clamping and hole style does the insert use? The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure seating and repeatable positioning in compatible TungCut cutter bodies. How does the coating and grade support production? The AH905 PVD coating on the carbide substrate reduces wear and edge chipping, enhancing tool life and supporting consistent machining performance across repetitive parting cycles. Is chip control supported during parting and plunge cutting? Yes, the single-sided chipbreaker is designed to improve chip formation and evacuation, reducing the likelihood of chip entanglement during narrow-groove and parting operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 120408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing capability, optimised chip control and straightforward machine integration for reliable, repeatable turning results; order the CPMT120408 NS9530 insert directly via Metav Werkzeuge or request advice from our consultants. CPMT 120408 NS9530 Tungaloy indexable insert for turning — uncoated cermet, 80° approach angle CPMT120408 NS9530 Tungaloy indexable insert is designed for finishing operations in turning and parting where low cutting forces and excellent surface quality are required Precision finishing with uncoated cermet Optimised for continuous cuts and light feeds Compatible with TungCut grooving and parting systems 11° relief and 0.8 mm radius for fine surface finish Consistent, high-quality finishing for steel components The combination of the uncoated cermet NS9530 and a fine 0.8 mm corner radius delivers low cutting forces and a noticeably high surface finish, especially in finishing passes on steel. The material's sharp cutting edge and controlled edge preparation reduce built-up edge and minimise cutting heat, which preserves component tolerances and reduces the need for secondary operations. As a finishing-grade insert it is well suited to continuous cutting conditions and small depths of cut, providing predictable dimensional results and reduced scrap rates. Stable chip control that shortens setup and cycle time A single-sided chipbreaker and a geometry tuned for finishing ensure stable chip formation even at low material removal rates. Stable chips improve tool life by avoiding irregular loading and reduce interruptions for chip clearing, supporting higher process reliability and shorter effective cycle times. The resulting consistency in machining feeds directly into improved throughput and easier process parameter replication across shifts and machines. Seamless integration into the TungCut system family Designed for use within the TungCut system, the insert fits standard holders, clamp elements and parting tools in the family, enabling quick tool changes and a modular setup. This compatibility supports flexible machining strategies — from external and internal grooving to parting-off and plunge turning — without the need for specialised tool bodies. The system approach simplifies inventory and tool management while maintaining high repeatability during multi-operation production runs. Geometry and mounting details that aid process planning Key specifications simplify fixture and process planning: an 80° approach angle, 11° relief angle, rhombic 12 mm size and 4.76 mm thickness for a compact cutting edge, plus a cylindrical hole with one-sided countersink (40°–60°) for secure clamping. These features support reliable seating and repeatable positioning in the toolholder, minimise vibration in light finishing cuts and facilitate consistent edge engagement. The combination of geometry and material characteristics makes this insert particularly effective where fine surface quality and dimensional control are priorities. For process-focused turning applications that demand repeatable finishing and predictable chip control, contact Metav Werkzeuge to procure the CPMT120408 NS9530 Tungaloy insert or to request tailored technical advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6998461 Manufacturer SKU: TUN6998461 Model series: TungCut Application: Turning (incl. grooving, parting and plunge turning) Designation: CPMT120408 NS9530 Core specifications Size: 12 Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 11° Approach angle: 80° Material & special features Material: carbide Grade: NS9530 (uncoated cermet) Chipbreaker: one-sided Plate form: rhombic Hole: with cylindrical hole + single-sided countersink (40°–60°) FAQ What materials is this insert intended for? The CPMT120408 NS9530 Tungaloy indexable insert is a finishing grade optimised for machining steel, offering low cutting forces and a sharp cutting edge suited to continuous cuts. Is the insert coated or uncoated? This insert uses an uncoated cermet grade (NS9530), selected for excellent surface quality in finishing operations. Which toolholders or systems is the insert compatible with? The insert is designed for the TungCut system family and fits compatible holders, clamp elements and parting tools used for grooving, parting and plunge turning. What are the key geometric values to consider during setup? Relevant values include a 12 mm size, 4.76 mm thickness, 0.8 mm corner radius, 11° relief angle and an 80° approach angle; the insert also has a cylindrical hole with a single-sided countersink for secure clamping. Can the insert be used for internal and external operations? Yes — the TungCut system application covers both external and internal grooving, parting and cut-off operations where the insert geometry fits the toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 120408 T5115 Wendeplatten - Tungaloy
High wear resistance and stable cutting-edge behaviour from the CVD-coated carbide T5115 grade ensure long tool life and consistent finish in grooving, parting and plunge turning. The rhombic CPMT120408 geometry with an 80° orientation and a 0.8 mm corner radius provides reliable chip control and secure clamping. Order the CPMT120408 T5115 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT 120408 T5115 — CPMT indexable insert for turning (grooving & parting) | Tungaloy The CPMT120408 T5115 is a CVD-coated carbide indexable insert in the TungCut system, developed for external and internal grooving, parting and plunge turning with a focus on stable chip formation and reproducible production results CVD-coated carbide grade T5115 Universal grade optimised for cast iron Rhombic CPMT 120408 shape, 80° angle One-sided chipbreaker, 0.8 mm corner radius Consistent edge life for demanding cast-iron work The CVD-coated carbide grade T5115 combines high temperature resistance with a balanced hardness-to-toughness ratio, which translates into low flank wear and a steady cutting edge over extended runs. The coating layer reduces adhesion and thermal softening, so cycle times remain stable and regrinds are less frequent. For shops producing components from cast iron, this means fewer interruptions for tool changes and a lower cost per finished part without sacrificing surface quality or dimensional stability. Precise geometry for reliable chip control and secure clamping The rhombic CPMT 120408 form with an 80° main face angle and a 0.8 mm corner radius offers a compromise between strength and finishing capability; the small radius supports accurate profiling while resisting chipping at entry points. The insert is supplied with a hole featuring a cylindrical bore plus a single-sided countersink (40°–60°), guaranteeing firm seating in TungCut holders and repeatable clamping torque. The one-sided chipbreaker channels swarf predictably, improving evacuation in both external and internal grooves and reducing the risk of built-up edge that can degrade dimension control. System advantages that boost throughput and reduce complexity As part of the TungCut system family, the insert integrates with a choice of holders, blades and clamping elements to match groove width and cutting depth. The universal tuning of this grade simplifies inventory: one insert grade can cover a broad range of cast-iron turning tasks, lowering storage needs and speeding up tool selection. The modular system approach supports fast setup changes and consistent process parameters, which in turn raises productivity and reduces scrap. For operations requiring reproducible results and efficient chip control, this indexable insert is a practical, cost-effective option. For reliable grooving and parting with Tungaloy quality, choose the CPMT120408 T5115 in the TungCut system and contact Metav Werkzeuge for availability and tailored advice at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 6864548 SKU manufacturer: TUN6864548 SKU: 6864548-Tungaloy Model series: TungCut Material: Carbide Grade / coating: T5115 (CVD-coated) Designation: CPMT120408 Facts Corner radius: 0.8 mm Clearance angle: 11° Main face angle: 80° Plate thickness: 4.76 mm Plate size: 12 Special features Rhombic plate form With hole: cylindrical hole + single-sided countersink (40°–60°) One-sided chipbreaker System family for grooving, parting and plunge turning System construction: holders, blades and clamping elements Universal grade optimised for cast iron FAQ Which turning operations suit this insert best? The CPMT120408 T5115 indexable insert is designed for external and internal grooving, parting and plunge turning within the TungCut system, offering stable performance in those applications. What materials is this grade intended for? Grade T5115 is a universal CVD-coated carbide developed specifically for machining cast iron, balancing wear resistance and cutting-edge stability for consistent results. How does the insert secure to the holder? The plate is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to ensure reliable seating in TungCut holders; the geometry supports repeatable clamping and positional accuracy. What benefits does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength while still allowing decent surface finish; it reduces the likelihood of chipping at interrupted cuts and aids dimensional control during grooving and parting. How does the CVD coating influence performance? The CVD-coated carbide surface on this insert improves thermal stability and wear resistance, which extends tool life and maintains cutting performance over longer production runs Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 120412 T5115 CM Wendeplatten - Tungaloy
CVD-coated T5115 grade and a 1.2 mm corner radius deliver a balance of wear resistance and edge stability for demanding cast-iron turning. Order the CPMT120412-CM T5115 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT 120412 T5115 ISO indexable insert for Turning — Tungaloy The CPMT120412-CM T5115 is an ISO rhombic indexable insert designed for external and internal turning applications, optimised for cast-iron machining with reliable chip control. CVD-coated carbide universal grade T5115 11° clearance for stable cutting 1.2 mm corner radius for robustness Rhombic ISO shape, 12 mm size Increased productivity through balanced grade and geometry The combination of a CVD-coated carbide substrate and the T5115 grade provides a dependable compromise between wear resistance and edge toughness, especially in cast-iron applications. The rhombic plate form and the CM chipbreaker geometry support consistent chip formation, which reduces interruptions and allows longer uninterrupted cutting times. This results in fewer insert changes and improved cycle times on batch runs, making the component suitable for production environments where both process reliability and predictable tool life are priorities. Stable cutting behaviour and reliable seating in holders Built to ISO plate dimensions and tolerances, the insert features a 1.2 mm corner radius and an 11° clearance angle, which together offer mechanical strength at the cutting edge and reduced rubbing on the flank face. The 80° included angle supports robust contact with matched external or boring holders, while the cylindrical hole with single-sided countersink (40°–60°) ensures secure clamping and repeatable positioning. These design elements minimise vibration and edge chipping, translating into a consistently high surface finish and reduced rework. Practical selection and material guidance forTurning When machining cast iron, selecting an insert with balanced toughness and abrasion resistance is essential; the T5115 grade is formulated for exactly this role. Use the rhombic ISO geometry for general-purpose external turning and light to medium internal operations where chip control and stable cutting forces are required. Match the insert with a compatible external holder or boring bar that corresponds to the ISO size, thickness (4.76 mm) and fixation style to ensure correct seating. For higher-speed operations, verify machine stiffness and coolant strategy to obtain the full benefit of the CVD coating. Contact Metav Werkzeuge for tailored advice on workpiece-specific parameters and to order the CPMT120412-CM T5115 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6864679 Manufacturer SKU: TUN6864679 Label / name: CPMT120412-CM T5115 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Facts Plate size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 11° Included angle: 80° Hole: with hole, cylindrical hole + single-side countersink (40°–60°) Special features Material: carbide Coating: CVD-coated Grade: T5115 (universal for cast iron) Chipbreaker: CM Plate form: rhombic Typical application: turning (external and internal) FAQ What materials is this insert designed for? The insert is specified for turning, with the T5115 grade optimised as a universal solution for cast-iron machining and balanced wear resistance. How does the chipbreaker affect performance? The CM chipbreaker promotes predictable chip formation and evacuation, improving process stability and reducing the risk of built-up edge during cast-iron turning. Which holder types are compatible with this ISO plate? Compatibility is determined by plate form, thickness (4.76 mm), hole style and tolerance class; use holders and boring bars complying with ISO dimensions for 12 mm rhombic inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 160508 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of the uncoated NS9530 cermet for precision finishing, the 0.8 mm corner radius for superior surface quality and the ISO compatibility that simplifies tool changeover; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CPMT 160508 NS9530 — Tungaloy turning insert (rhombic, 0.8 mm radius, 11° clearance) The CPMT 160508 NS9530 is an ISO-standard rhombic turning insert optimised for finishing on steel, offering a sharp cutting edge and low cutting forces for improved surface integrity. ISO-indexed rhombic insert, 16 mm Cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces 0.8 mm corner radius, 11° clearance angle Precision finishing that reduces secondary operations The uncoated cermet NS9530 is formulated for finishing applications on steel, delivering a sharp cutting edge that reduces cutting forces and minimises burr formation. This results in a more consistent high surface finish, often removing the need for subsequent grinding or polishing. The combination of the substrate and geometry supports fine feeds and small depths of cut while maintaining dimensional accuracy across continuous cuts. Stable cutting performance and predictable tool life A rhombic geometry with a 0.8 mm corner radius and 11° clearance provides a reliable balance between edge strength and form accuracy, enabling consistent chip formation under steady-state cutting. The insert’s construction from carbide ensures thermal stability during finishing passes, while the specified chipbreaker 24 aids controlled evacuation. This predictable behaviour contributes to stable cycle times and lower rework rates on serial production. System compatibility and straightforward handling Manufactured to ISO turning insert standards, the component fits holders that match the insert’s form, clearance and tolerance class; compatibility depends on holder type, size and clamping method. The CPMT 160508 format with 16 mm inscribed diameter and a 5.56 mm thickness allows quick replacement in common external holders and boring bars, reducing machine downtime and simplifying tool inventory management. Application guidance for finishing steel components For optimal results, pair the insert with a holder that provides rigid support and minimal overhang; the insert is best applied to continuous cuts and small depths of cut where surface integrity is the priority. Select feeds and cutting speeds in accordance with the machine capability and the steel grade to exploit the NS9530 finishing characteristics. The insert’s cylindrical hole with single-sided countersink (40°–60°) secures repeatable clamping and axial positioning in ISO-style clamping systems. Contact Metav Werkzeuge for tailored application advice on Tungaloy NS9530 cermet inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance and fast supply. Technical data Article number: 6998462 SKU: 6998462-Tungaloy Manufacturer SKU: TUN6998462 Model series: ISO turning inserts Key dimensions and figures Inscribed size: 16 mm Thickness: 5.56 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 80° Chipbreaker: 24 Design and features Rhombic insert shape Uncoated cermet grade NS9530 Material: carbide Hole: with cylindrical hole and single-sided countersink (40°–60°) Intended application: turning (finishing on steel) Compatibility: ISO-standard holder systems FAQ What material applications suit this insert best? The insert is designed for finishing on steel; the NS9530 cermet grade specifically targets continuous cuts and small depths of cut on steel components. Which insert geometry ensures the specified surface quality? The rhombic shape combined with a 0.8 mm corner radius and 11° clearance provides the edge definition and stability that support high surface finish levels for finishing operations. Is the insert compatible with standard ISO holders? Yes, the format follows ISO turning insert standards; compatibility requires matching holder form, clearance, tolerance class, clamping style, size and thickness for secure seating. How does the chipbreaker influence performance? The included chipbreaker 24 promotes controlled chip formation and evacuation, improving process stability during finishing and helping maintain consistent surface quality. Which product code should be specified when ordering? Specify the manufacturer article number 6998462 or SKU 6998462-Tungaloy for precise identification when ordering the Tungaloy CPMT 160508 NS9530 finishing insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 160508 T9225 Wendeplatten - Tungaloy
Benefit from the combination of robust CVD-coated cemented carbide, ISO compatibility and a 0.8 mm corner radius for stable medium to heavy steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CPMT 160508 T9225 Turning Insert (CVD-coated carbide), 0.8 mm radius — Tungaloy A CPMT 160508 T9225 ISO turning insert engineered for medium to heavy-duty steel turning, offering a balance of toughness and wear resistance for interrupted and variable cutting conditions. CVD-coated carbide for enhanced wear resistance Universal grade for medium to heavy steel turning ISO‑standard rhombic geometry with locating hole 0.8 mm corner radius for robust cutting edge Consistent cutting performance through a resilient grade The T9225 grade is a CVD-coated cemented carbide developed for robust universal performance in steel machining. Its composition provides increased wear resistance while retaining sufficient toughness for slightly interrupted cuts and changing engagement conditions, which reduces edge chipping and extends life in heavy-duty operations. As a consequence, cycle times become more predictable and tool changes less frequent, supporting leaner production. Geometry and ISO compatibility for reliable clamping The rhombic insert shape with an included angle of 80°, a relief angle of 11°, and a 0.8 mm corner radius delivers a stable cutting edge suited to external and internal turning. The insert is ISO‑standardised, so compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness — all standardised parameters that permit secure seating and repeatable positioning. The cylindrical hole with a single‑side countersink (40°–60°) ensures positive locating and straightforward replacement with standard clamping systems. Design details that aid process stability and chip control A 5.56 mm insert thickness and a designated chipbreaker 24 support robust chip formation and evacuation during medium to heavy cuts, reducing the risk of built‑up edge and improving surface finish. The insert’s ISO turning insert series construction means it forms part of a simple system: insert, matched external holder or boring bar, and standard mounting hardware. Selecting the correct chipbreaker and grade for the workpiece material, cutter geometry and machine stability directly improves cutting stability and lowers overall machining costs. Practical benefits for workshop productivity When used for steel turning, the combination of CVD coating, appropriate chipbreaker and standardised geometry reduces unplanned downtime and contributes to reproducible part quality. The insert suits both external and internal operations and can be paired with a range of holders to match rigidity and reach requirements. This translates into fewer tool changes, steadier dimensional control and a measurable improvement in throughput for batch and single‑piece production alike. Contact Metav Werkzeuge for application advice and to source matching holders for the Tungaloy CPMT 160508 T9225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781197 SKU: 6781197-Tungaloy Manufacturer SKU: TUN6781197 Brand: Tungaloy Designation (ISO): CPMT160508-24 Core data Corner radius: 0.8 mm Relief angle: 11° Insert thickness: 5.56 mm Inscribed circle/size: 16 mm Included angle: 80° Chipbreaker: 24 Special features Material: cemented carbide Grade: T9225 (CVD-coated cemented carbide) Geometry: rhombic Hole: cylindrical hole with single‑side countersink (40°–60°) Application: turning (external and internal) Model series: ISO turning insert series FAQ Is this insert compatible with standard ISO turning holders? The CPMT 160508 T9225 insert follows ISO geometry; compatibility with holders is determined by form, relief angle, tolerance class, fastening and thickness, so pairing with the correct ISO holder ensures secure clamping and repeatable positioning. For which materials is this grade recommended? The T9225 grade is optimised for medium to heavy steel turning, offering a balance of wear resistance and toughness for variable cut conditions and slightly interrupted cuts. What does the chipbreaker number 24 indicate for cutting behaviour? Chipbreaker 24 provides controlled chip formation for moderate to heavy cutting depths, improving evacuation and reducing the chance of snarled chips during steel machining with the CPMT 160508 T9225 insert. How does the 0.8 mm corner radius affect part finish and tool life? A 0.8 mm corner radius increases edge strength for heavy engagement and interrupted cuts, enhancing tool life; it also influences surface finish and should be matched to the required tolerance and cutting data. Which system components are needed to use this insert efficiently? Efficient use involves a suitable ISO external holder or boring bar, compatible clamping hardware and replacement screws; the insert forms part of a standardised system for stable and repeatable turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 160512 NS9530 Wendeplatten - Tungaloy
Conflicting technical data detected: the tool is described both as cemented carbide and as an uncoated cermet (NS9530). Please verify the material specification before a reliable product description can be generated, as accurate identification of the material is crucial for determining the tool's performance characteristics, potential applications, and compatibility with specific machining processes or environments, ensuring that the correct information is provided to users or customers who rely on precise technical details to make informed decisions about the suitability of the product for their specific needs or operational requirements.
CPMW 050208 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of GH330 wear resistance, a 0.8 mm corner radius and a rhombic 05 geometry for dependable, productive milling. Order the insert directly via Metav Werkzeuge or consult our experts for application-specific setup. CPMW050208 GH330 indexable milling insert — Tungaloy The CPMW050208 GH330 is a rhombic 05-format indexable insert for milling, designed for productive face, shoulder, slot and contour milling with a 0.8 mm corner radius and a secure clamping hole. GH330 grade for wear resistance Rhombic 05 form with 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Carbide body for productive milling Longer tool life through optimised grade and geometry The combination of the GH330 cutting grade and a carbide substrate provides a balance of wear resistance and toughness that supports consistent tool life. The 0.8 mm corner radius reduces edge chipping under moderate to heavy feeds while maintaining cutting stability, which helps to reduce unscheduled tool changes and keeps machine downtime to a minimum. This leads to improved process economy and a more predictable production flow when using the insert in a compatible milling body. Secure seating and predictable cutting behaviour A cylindrical hole with a single-sided countersink (40°–60°) ensures reliable clamping and repeatable seating in the cutter body, contributing to vibration control and positional accuracy. The insert’s rhombic 05 shape combined with an 11° relief angle and an 80° included angle produces a cutting geometry suited to general-purpose milling tasks while allowing good access for shoulder and contour work. These geometric characteristics support consistent chip formation and surface finish when matched to the correct cutter and clamping hardware. Versatility across standard milling tasks The insert is intended for a range of milling operations — from face and shoulder milling to slot, high-feed and contour milling depending on the chosen tool family. With no chipbreaker fitted, the component is particularly suited to operations and cutting conditions where chip control is provided by the cutter body design or by process parameters. The design supports efficient material removal and reliable surface quality, making the insert a practical choice for production environments where versatility and throughput are priorities. Compatibility notes and installation guidance Correct function depends on matching the insert seat, geometry and cutter body; the insert thickness of 2.38 mm must be compatible with the chosen toolholder and clamping screw. As the insert is supplied without a chipbreaker, ensure cutting parameters and the chosen milling body provide the required chip control for the workpiece material. For application-specific setup and parameter recommendations, the Metav Werkzeuge team can advise on cutter‑to‑insert matching and feed/speed optimisation to achieve stable, repeatable results. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy inserts into existing milling systems — email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability. Technical Data Article number: 6802447 Manufacturer SKU: TUN6802447 SKU: 6802447-Tungaloy Material: carbide Model series: milling indexable inserts Numbers / Core technical data Corner radius: 0.8 mm Plate thickness: 2.38 mm Relief angle: 11° Included angle: 80° ISO designation: 050208 Special features / Versions Rhombic 05 plate form With hole: cylindrical hole + single-sided countersink (40°–60°) No chipbreaker (without) Grade: GH330 (Tungaloy cutting grade) Typical applications: face, shoulder, slot, high-feed and contour milling depending on tool family Insert seat, geometry and cutter body must be technically compatible FAQ What materials is this insert suitable for? The CPMW050208 GH330 insert is a carbide cutting grade intended for general milling tasks; the GH330 grade offers a balance of wear resistance and toughness suitable for a wide range of steels and general workshop applications. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius improves edge strength and reduces chipping risk under heavier feeds, which helps to extend tool life and maintain surface quality when using the insert in appropriate milling conditions. Is a chipbreaker included and how does that change cutting strategy? This insert is supplied without a chipbreaker; machining strategies should rely on cutter body chip control or adjusted cutting parameters to ensure safe and effective chip evacuation. Which cutter bodies are compatible with this insert? Compatibility requires that the insert seat, geometry and cutter body are technically matched; the insert’s cylindrical hole and countersink require a clamping system that accepts the CPMW050208 form and 2.38 mm thickness. What clamping and seating features assist repeatability? The cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and consistent seating, improving repeatable positioning and helping to control vibration in production runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMW 050208 UX30 Wendeplatten - Tungaloy
Benefit from a combination of a sharp cutting edge, UX30 uncoated carbide grade and a rhombic 05 geometry to achieve efficient milling with low cutting forces and reliable chip formation. Order the CPMW050208 UX30 insert directly via Metav Werkzeuge or consult our team for selection guidance. CPMW050208 UX30 Tungaloy indexable insert for milling — rhombic 05, 0.8 mm radius The CPMW050208 UX30 is an indexable carbide insert for Tungaloy milling systems, designed for face, shoulder, slot, high‑feed and contour milling where low cutting forces and good chip formation are required. Sharp cutting edge for low cutting forces UX30 grade, uncoated carbide Rhombic 05 shape, 0.8 mm corner radius Cylindrical hole with single‑side countersink Reduced cutting forces for more productive machining The UX30 grade is an uncoated carbide developed for applications where a sharp cutting edge and controlled chip formation are decisive. With its geometry, the insert reduces cutting resistance which can translate to lower spindle loads and extended tool life in many milling operations. This results in a more consistent process, particularly when machining components that demand stable cutting behaviour and predictable power consumption. Stable clamping and geometry that supports repeatability The insert’s rhombic 05 form combined with the 0.8 mm corner radius ensures reliable edge strength while allowing precise engagement in corners and shoulders. The insert is produced with a cylindrical hole and a single‑side countersink (40°–60°) to match the clamping requirements of the corresponding milling body; note that insert seat and geometry must be compatible with the chosen cutter. The specified 11° clearance angle and 80° included angle support secure seating and repeatable indexing during tool changes. Practical suitability and application advantages Intended for a range of milling tasks — from face and shoulder work to slots, high‑feed and contour milling — the insert offers versatility within Tungaloy tool families. It is particularly suitable when low cutting forces and good chip formation are priorities, for example in thin‑walled workpieces or where machine power is limited. As an indexable carbide spare part, it combines straightforward replacement with cost‑effective performance and predictable machining results across batch production runs. For machining that benefits from sharp edges and controlled chip flow, contact Metav Werkzeuge for tailored advice on Tungaloy inserts at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6802448 Manufacturer SKU: TUN6802448 SKU: 6802448-Tungaloy Model series: milling indexable inserts Core measurements Corner radius: 0.8 mm Plate thickness: 2.38 mm Clearance angle: 11° Included angle: 80° Size: 05 ISO designation: 050208 Design & features Material: carbide Grade: UX30 (uncoated) Shape: rhombic Hole style: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: none Application: milling Typical operations: face, shoulder, slot, high‑feed and contour milling Note: insert seat, geometry and milling body must match technically FAQ Which materials is this insert suitable for? This CPMW050208 UX30 insert is designed for general milling tasks where low cutting forces and good chip formation are required; suitability depends on the workpiece material and the chosen cutting parameters. What does the UX30 designation mean? The UX30 grade indicates an uncoated carbide with a sharp cutting edge optimised for good chip formation and lower cutting forces in milling operations. How is the insert mounted in the milling body? The insert uses a cylindrical hole with a single‑side countersink and requires a compatible Tungaloy milling body and clamping screw suited to the CPMW geometry. Is there a chipbreaker on this insert? This insert is supplied without a chipbreaker, which is why it is commonly used where controlled chip flow is achieved by geometry and process parameters. Which milling operations are best suited to this insert? Typical applications include face and shoulder milling, slotting, high‑feed and contour milling, depending on the assigned cutter family and cutting data. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMW 06T208 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of GH330 wear resistance, a 0.8 mm corner radius and secure clamping for continuous milling productivity — order directly via Metav Werkzeuge or request technical advice from our consultants. CPMW 06T208 GH330 Indexable Milling Insert for Milling – Tungaloy The CPMW06T208 GH330 is a rhombic indexable insert designed for face, shoulder, slot, high-feed and contour milling in compatible Tungaloy systems. GH330 grade: wear resistance and toughness Rhombic 06 form, 80° cutting angle 0.8 mm corner radius for robust edge Countersunk hole for secure clamping Consistent cutting performance through optimised grade and edge geometry The combination of the GH330 carbide grade and the insert geometry delivers a balance of wear resistance and edge stability that is intended to extend in‑service life while maintaining surface quality. The moderate corner radius of 0.8 mm and the 80° cutting angle increase mechanical strength at the cutting edge, which reduces the risk of premature chipping during interrupted cuts. This results in fewer tool changes and a more continuous production flow, a tangible benefit for shops pursuing higher uptime and reliable batch processing. Secure fixture and system compatibility for vibration‑reduced machining Designed as part of a Tungaloy milling system, the insert requires a matching plate seat, geometry and cutter body; correct matching is essential and improves process reliability. The insert features a countersunk hole with a cylindrical bore and a one‑side countersink (40°–60°), combined with a 2.78 mm thickness and rhombic 06 form, which together ensure stable clamping and reduced micro‑movement. A defined 11° clearance angle helps to prevent rubbing and to preserve the cutting edge. These mechanical decisions are made to lower vibration, enhance surface finish and support higher feeds where the tooling permits. Versatile application spectrum and practical handling details The insert suits a range of milling operations — planing, shoulder milling, slotting, high‑feed strategies and contouring — depending on the selected cutter family. It is supplied without a chipbreaker, which makes the geometry particularly appropriate for applications where an open cutting edge is required or where the cutter body provides chip control. For users less familiar with chipbreaker concepts: a chipbreaker is a micro‑geometry that assists in fragmenting and evacuating chips; its absence here implies that chip control is achieved at the toolbody level or in processes favouring continuous chips. The robust carbide construction supports consistent performance across repetitive cycles and contributes to lower total machining costs through reduced rework. Contact Metav Werkzeuge to specify the Tungaloy GH330 CPMW06T208 insert for robust milling setups and to request tailored application advice from our technical team. Technical data Article number: 6802449 Manufacturer SKU: TUN6802449 Retail SKU: 6802449-Tungaloy Model series: Fräswendeschneidplatten Facts Corner radius: 0.8 mm Cutting angle: 80° Clearance angle: 11° Thickness: 2.78 mm Size: 06 Special features Grade: GH330 Material: carbide Form: rhombic Hole: with hole Hole style: cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: none Typical use: milling (face, shoulder, slot, high‑feed, contour) FAQ What milling operations is this insert suitable for? The insert is intended for face, shoulder, slot, high‑feed and contour milling; the exact suitability depends on the chosen cutter body and tool family for the CPMW06T208 GH330. Does the insert require a special clamping system? A matching Tungaloy cutter body and correct plate seat are required; the CPMW06T208 features a countersunk hole and cylindrical bore for secure clamping. Is a chipbreaker integrated in this geometry? No, the CPMW06T208 GH330 is supplied without a chipbreaker, so chip control is expected to be provided by the cutter body or machining strategy. What are the key dimensions to check when replacing inserts? Check corner radius (0.8 mm), thickness (2.78 mm), size (06), cutting angle (80°) and the hole/countersink configuration to ensure compatibility with the cutter body. Which material is the insert made from and what does the grade offer? The insert is made from carbide with the GH330 grade, chosen to combine wear resistance, toughness and stable cutting edge behaviour for general milling tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMW 06T208 UX30 Wendeplatten - Tungaloy
Take advantage of the combination of sharp cutting geometry, low cutting forces and consistent chip formation for reliable milling operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific setup and matching cutter bodies. CPMW 06T208 UX30 indexable milling insert by Tungaloy — rhombic 80° geometry, uncoated carbide CPMW 06T208 UX30 Tungaloy insert for milling, designed for plan, shoulder, slot, high-feed and contour operations when low cutting forces and controlled chip formation are required Sharp cutting edge for low cutting forces Uncoated cemented carbide grade UX30 Rhombic 80° geometry for versatile milling Cylindrical hole with single-sided countersink Efficient milling through optimised geometry and material The rhombic 80° geometry of this indexable insert delivers a balance between robustness and accessibility for different milling strategies. Combined with the uncoated cemented carbide grade UX30, the configuration produces a sharp cutting edge that reduces cutting resistance and favours consistent chip formation. For industrial workshops aiming to increase productivity, this means smoother engagement with the workpiece and improved process stability during plan and shoulder milling. The design is particularly effective where lower cutting forces are prioritised, allowing for stable machining of a variety of materials while maintaining tool life. Simple integration and secure clamping for repeatable results Designed to fit Tungaloy milling systems, the insert requires matching seat, geometry and cutter body to ensure correct location and secure clamping. The cylindrical hole with single-sided countersink (40°–60°) supports reliable fixation and repeatable indexing, while the rhombic shape provides multiple cutting corners for extended utilisation. Where modular system assembly is used, the combination of correct insert seating and the appropriate clamp screw ensures safe operation and reduces the risk of vibration-related wear, contributing to consistent dimensional accuracy in serial production. Application-driven benefits and material suitability This insert is intended for general milling tasks including plan, shoulder, slot, high-feed and contour milling depending on the assigned tool family. The edge radius 0.8 mm supports a compromise between edge strength and sharpness, making it suitable for operations that require a fine cutting action without excessive edge fragility. The absence of a chipbreaker indicates a reliance on process parameters and cutter body design to manage chips; when paired with an appropriate cutter and cutting data, the result is efficient chip evacuation and improved surface finish. The CPMW06T208 UX30 is therefore a practical choice for production environments seeking reliable cutting performance with straightforward setup. For application advice, cutter-body matching or to request tailored cutting data, contact Metav Werkzeuge—our consultants provide practical support and rapid supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6802450 SKU: 6802450-Tungaloy Manufacturer SKU: TUN6802450 Facts Insert designation: CPMW06T208 ISO code: 06T208 Size: 06 Corner radius: 0.8 mm Wedge angle: 80° Relief angle: 11° Plate thickness: 2.78 mm Special features Material: cemented carbide Grade/coating: UX30 (uncoated) Shape: rhombic Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: without Typical use: milling (plan, shoulder, slot, high-feed, contour) System composition: milling body, indexable insert, clamping screw, optional backing FAQ What applications is this insert best suited for? The CPMW06T208 UX30 insert is used for milling tasks such as plan, shoulder, slot, high-feed and contour milling when low cutting forces and improved chip formation are priorities. Can this insert be used on all Tungaloy milling bodies? Compatibility requires matching the insert seat, geometry and cutter body; the insert fits Tungaloy milling systems with the corresponding CPMW seat and fixation layout. Which materials are suitable for machining with this grade? The uncoated UX30 cemented carbide grade is intended for a wide range of materials where a sharp cutting edge and controlled chip formation are beneficial. How does the 0.8 mm radius affect performance? An edge radius of 0.8 mm offers a balance between edge robustness and cutting sharpness, supporting good surface finish while resisting premature edge chipping. Is there a chipbreaker included on this insert? This insert is supplied without a chipbreaker, so chip control will depend on cutter design and selected cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMW 080204 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated performance, ISO conformity and robust carbide construction for consistent turning of cast-iron components; order the insert directly via Metav Werkzeuge or consult our technical advisers for application support. CPMW 080204 T5115 — ISO turning insert, CVD-coated carbide (Tungaloy) A CPMW 080204 T5115 indexable turning insert for external and internal turning, offering a universal grade optimised for cast iron with a stable cutting edge and standard ISO compatibility CVD-coated universal grade T5115 ISO CPMW080204 rhombic insert Corner radius 0.4 mm for consistent profile Cylindrical hole with 40°–60° countersink High-performance cutting for cast iron with proven coating technology The CPMW insert combines a CVD coating with a wear-resistant cemented carbide substrate to deliver a balance of edge stability and abrasion resistance tailored for cast-iron machining. The T5115 grade is formulated as a universal solution for grey and nodular cast irons, which means fewer insert changes and longer periods of productive cutting. The chemically vapour deposited coating enhances resistance to built-up edge and thermal stress, helping to maintain dimensional stability over serial runs. Precise geometry and ISO conformity for predictable toolholding Designed as an ISO-standard rhombic insert, the plate features a defined 80° shape angle and a 11° clearance angle, ensuring reliable seating in compatible holders. The rhombic shape and the corner radius 0.4 mm produce repeatable part contours and controlled engagement at the cut. The insert is supplied with a cylindrical hole plus a one-sided countersink (40°–60°) to match common clamping systems; however, final compatibility depends on holder form, tolerance class, fastening and thickness—check the holder specification before assembly. Durable edge life for steady productivity The combination of a robust carbide substrate and the CVD surface treatment delivers steady wear behaviour and resistance to thermal softening under moderate to high cutting speeds. This results in longer tool life, fewer interruptions for index changes and a predictable process window for serial production. The absence of a dedicated chipbreaker in this variant makes it suitable for operations where chip control is managed by cutting conditions, tool overhang or external chip-guiding devices, rather than relying on an aggressive built-in breaker. Application guidance and selection tips for reliable results As part of an ISO insert system, the CPMW 080204 is best used with a matching external holder or boring bar, an appropriate clamping pad or clamping kit, and the correct screw set. For external and internal turning of cast-iron components, start with conservative speeds and feeds to verify surface finish and thermal behaviour, then adjust for higher productivity. When machining different cast-iron grades or varying machine rigidity, consider alternative grades or chipbreaker geometries for optimal control; our technical advisers can help with grade selection and cutting parameter recommendations. For application-specific advice or availability of the Tungaloy CPMW 080204 T5115 insert, contact Metav Werkzeuge for expert guidance and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6862077 Manufacturer SKU: TUN6862077 Product SKU: 6862077-Tungaloy Model series: ISO turning indexable inserts Designation: CPMW080204 Facts Insert size: 08 Shape angle: 80° Clearance angle: 11° Thickness: 2.38 mm Corner radius: 0.4 mm Special features Grade / coating: T5115 (CVD-coated cemented carbide) Material: cemented carbide Shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: none Application: external and internal turning Compatibility: determined by form, clearance, tolerance class, fastening, size and thickness ISO-compliant insert FAQ Which materials is this insert suitable for? The T5115 grade is a universal, CVD-coated carbide optimised for machining cast iron; it is primarily specified for grey and nodular cast irons. How is the insert secured in the holder? The insert uses a cylindrical hole with a one-sided countersink (40°–60°) and is clamped by the matching holder, pad and screw; check holder tolerance and fastening type for proper seating with the CPMW 080204 insert. What are the key geometry values to consider for setup? Refer to the 80° shape angle, 11° clearance and 0.4 mm corner radius when selecting feed and depth values for predictable form and surface finish. Is there a chipbreaker on this variant? This variant is supplied without a chipbreaker, so chip control is achieved via cutting conditions, tool orientation or external chip guidance rather than an integrated breaker geometry. Can the insert be used for internal turning? Yes, the CPMW 080204 insert is suitable for both external and internal turning operations when paired with an appropriate boring bar or internal holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMW 080208 T5115 Wendeplatten - Tungaloy
Combine the CVD-coated carbide T5115 grade with the ISO rhombic CPMW080208 geometry for stable cutting-edge life and consistent results in cast-iron turning; order directly via Metav Werkzeuge or ask the consultants for technical guidance. CPMW080208 T5115 turning insert by Tungaloy — CVD-coated carbide, rhombic ISO 08 The CPMW080208 T5115 is an ISO rhombic turning indexable insert for external and internal turning, optimised as a universal grade for cast iron with balanced wear resistance and cutting-edge stability. CVD-coated carbide T5115 grade Universal grade for cast iron Rhombic ISO 08, 11° clearance Cylindrical hole with 40°–60° countersink Consistent performance for cast-iron turning The CVD-coated T5115 grade delivers a pragmatic balance between wear resistance and edge stability, making it suitable for a wide range of cast-iron turning tasks. The coated carbide substrate provides a protective layer that reduces flank wear under interrupted cuts, while the universal character of the grade permits stable life across differing cast-iron alloys. This performance orientation supports predictable tool-change intervals and contributes to reduced downtime in production environments where consistent component quality and cycle times matter. Precision geometry for reliable clamping and repeatability Geometry and dimensions are decisive for repeatable clamping and consistent chip flow: the ISO rhombic 08 shape with 11° clearance and a 0.8 mm corner radius works well where a robust profile and moderate nose radius are required. The insert thickness of 2.38 mm and the cylindrical hole with a one-sided countersink (40°–60°) enable secure fastening in standard ISO holders; compatibility is determined by form, free angle, tolerance class, fastening method, size and thickness. Specifying matching seats and clamp sets yields higher repeatability and reduces runout, which in turn improves surface finish and dimensional stability. Practical selection and application for productive machining With no chipbreaker included, selection of the correct chip control element and cutting parameters is crucial: choose a chipbreaker and insert grade that match the workpiece, machining strategy and machine stability. The indexable insert concept allows quick rotation or replacement, and the universal grade reduces inventory complexity while maintaining reliable edge life. For workshops seeking a pragmatic, application-oriented solution, this insert offers straightforward integration into existing tool systems and supports predictable process outcomes when paired with suitable holders and clamping hardware. For reliable cast-iron turning with Tungaloy’s T5115 grade, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6862089 Manufacturer SKU: TUN6862089 SKU: 6862089-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Grade: T5115 Designation: CPMW080208 Application: Turning Shape: Rhombic Core specifications Size: 08 Plate thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 11° Insert angle: 80° Hole: with hole Countersink angle: 40°–60° Features & compatibility CVD-coated carbide grade Universal for cast iron No chipbreaker Cylindrical hole with one-sided countersink Compatibility determined by form, free angle, tolerance, fastening and size FAQ Is this insert suitable for machining cast iron? Yes. The CPMW080208 T5115 is a universal T5115 grade formulated for reliable performance in cast-iron turning operations. Which holder characteristics must match for correct clamping? Compatibility requires matching the insert form, free angle (11°), tolerance class, fastening method and size; the rhombic ISO 08 seat and the cylindrical hole with countersink must be accommodated by the chosen holder. What are the key dimensional data for setup? The insert has a corner radius of 0.8 mm, plate thickness of 2.38 mm and an 11° clearance angle, which should be entered into tool-setting routines for accurate tool offsets. Does the insert include a chipbreaker? No, this variant is supplied without a chipbreaker; chip control should therefore be managed via cutting parameters and the holder’s chip control geometry. How is the insert fixed and indexed? Fixing is via the central hole; the cylindrical hole with a one-sided 40°–60° countersink suits standard clamp sets and screws for positive location and repeatable indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMW 090304 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated cemented carbide grade designed for reliable cast-iron machining, a rhombic 80° geometry with a precise 0.4 mm corner radius, and ISO compatibility that simplifies tool selection and replacement; order the insert directly via Metav Werkzeuge or request application advice from our consultants. CPMW090304 T5115 CPMW turning insert — CVD-coated cemented carbide, 80° rhombic (Tungaloy) The CPMW090304 T5115 is an ISO-standard rhombic turning insert, engineered for efficient external and internal turning with a universal grade optimised for cast iron machining. CVD-coated cemented carbide Universal grade for cast iron Rhombic 80° geometry 0.4 mm corner radius Reliable performance for cast-iron turning The CVD-coated cemented carbide composition and the T5115 grade provide a balanced combination of wear resistance and cutting-edge stability, which reduces unplanned tool changes and maintains part quality in prolonged runs. The coating forms a durable barrier that delays abrasive wear on the carbide substrate; this is particularly valuable when machining cast iron, where abrasive inclusions can accelerate flank wear. In practice, the result is a more consistent surface finish and predictable tool life, helping to lower overall machining costs per component. Geometry that supports precision and secure clamping The rhombic 80° shape combined with a 0.4 mm corner radius and an 11° clearance produces a geometry that is both versatile and precise. A smaller corner radius enables fine detail and close tolerances on external profiles and bores, while the 80° point angle balances strength and accessibility in shoulder and profile turning. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°), ensuring firm and repeatable clamping when paired with the correct holder, clamping pad and screws; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness according to ISO standards. System thinking and selection guidance for consistent results This ISO insert is part of a system that includes a matching external holder or boring bar, underlay/clamping set and replacement screws. Since the present variant is specified without a chipbreaker, selection of the correct chipformer and grade for the workpiece and machining conditions is essential to secure stable chip control and process reliability. For many cast-iron applications the universal T5115 grade is a practical choice, but matching the grade and geometry to part stability and cutting parameters will yield the best economy and surface quality. For tailored advice on implementing Tungaloy CPMW090304 T5115 inserts in production and for current availability, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation and order support. Technical data Article number: 6862082 SKU: 6862082-Tungaloy Manufacturer SKU: TUN6862082 Designation: CPMW090304 T5115 Tungaloy turning insert Facts Cutting angle: 80° Corner radius: 0.4 mm Thickness: 3.18 mm Clearance (relief) angle: 11° Size: 09 Hole: with cylindrical hole + single-sided countersink (40°–60°) Special features Material: cemented carbide Coating: CVD coating Grade: T5115 (universal for cast iron) Shape: rhombic Chipbreaker: none Series: ISO turning inserts Application: turning (external and internal) FAQ What materials is this insert intended for? The T5115 grade is a universal CVD-coated cemented carbide designed primarily for cast iron machining; it offers a balanced trade-off between wear resistance and edge stability for typical cast-iron turning tasks. How is compatibility with a turning holder determined? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO-standard designation and the insert geometry must match the holder and clamping set. Does this insert include a chipbreaker? This variant is supplied without a chipbreaker; therefore, chip control must be achieved by selecting an appropriate chipformer or by adapting cutting parameters and workpiece clamping to the machining situation. Which tool system components are required to fit the insert? A suitable external holder or boring bar, an underlay/clamping set and replacement screws are required; the ISO insert is operated as part of a complete clamping system to ensure secure and repeatable fixation. What is the exact product identification to order? Order using the designation CPMW090304 T5115 or the article number 6862082 and the SKU 6862082-Tungaloy to ensure the correct Tungaloy indexable turning insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMW 090308 T5115 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, CVD‑coated carbide wear resistance and a compact geometry for consistent turning results and reduced tool change times. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CPMW 090308 T5115 indexable turning insert by Tungaloy — rhombic 09, 11° clearance CPMW 090308 T5115 is an ISO‑standard indexable insert designed for general turning applications, offering a balanced combination of wear resistance and edge stability for cast iron machining ISO‑standard rhombic insert 09 CVD‑coated carbide grade T5115 Optimised for cast iron machining Precision fit and secure clamping for stable production The ISO‑standard geometry ensures compatibility with a wide range of external holders and boring bars: form, clearance angle, tolerance class, fastening and thickness determine the correct match. The rhombic shape with a cylindrical hole and 40°–60° one‑sided countersink simplifies secure clamping and repeatable seating, which reduces vibration and improves process stability. Clear, standardised interfaces shorten setup times and limit idle time caused by mismatched components. Long tool life and consistent chip control in cast iron The insert uses the T5115 grade — a CVD‑coated carbide composition formulated as a universal grade for cast iron. The CVD coating provides improved wear resistance and thermal stability during interrupted cuts and continuous turning; the carbide substrate maintains edge strength under mechanical load. Together, these properties deliver predictable tool life and a reliable surface finish, supporting higher productivity and fewer unplanned insert changes. Geometry for repeatable finishes and controlled cutting forces A corner radius of 0.8 mm and a plate thickness of 3.18 mm give a stable cutting edge that balances strength and finishing capability. The 80° cutting angle supplies a robust engagement for both external and internal turning, while the absence of a chipbreaker on this variant allows selection of tailored chipcontrol solutions depending on material and operation. Where fine surface quality is required, the combination of radius and coating supports consistent results with reduced vibration. Easy integration into modular turning systems The insert is designed as part of a modular system: the full assembly typically includes the ISO insert, a compatible external holder or boring bar, backing clamp and replacement screws. This modularity means spare parts are straightforward to manage and insert changes are rapid, helping to maintain throughput in high‑mix production. The CPMW 090308 T5115 insert aligns with standard holder designs, simplifying stocking and reducing tooling complexity. Contact Metav Werkzeuge for application advice, availability and to confirm the optimal holder combination for the Tungaloy CPMW 090308 T5115 insert — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical Data Article number: 6862097 Manufacturer SKU: TUN6862097 Merchant SKU: 6862097-Tungaloy Model series: ISO turning indexable inserts Designation: CPMW090308 Facts Cutting angle: 80° Clearance (relief) angle: 11° Thickness: 3.18 mm Corner radius: 0.8 mm Size: 09 ISO code: 090308 Special features Material: carbide Coating/grade: T5115 (CVD‑coated carbide) Insert shape: rhombic Hole: with cylindrical hole and one‑sided countersink (40°–60°) Chipbreaker: none (without chipbreaker) Primary application: turning (external and internal) Typical system: insert + external holder/boring bar + backing clamp + replacement screws Universal grade optimised for cast iron machining FAQ Is this insert suitable for machining cast iron? Yes. The CPMW 090308 T5115 insert by Tungaloy is a universal grade optimised for cast iron, combining CVD‑coated carbide for wear resistance with edge stability suited to that material. Which holders are compatible with this ISO insert? Compatibility depends on the holder's form, relief angle, tolerance class, fastening method, size and thickness; the CPMW 090308 follows ISO dimensions and fits standard holders designed for rhombic 09 inserts. What does the absence of a chipbreaker mean for machining? The variant without a chipbreaker allows selection of a specific chip control solution for the workpiece and operation; for the CPMW 090308 T5115, optimised holder geometry and process parameters are recommended to manage chip evacuation. How does the 0.8 mm corner radius affect surface finish? A 0.8 mm radius offers a compromise between edge strength and finishing capability, enabling smoother surfaces while retaining robustness under typical turning loads. Can the insert be used for both external and internal turning? Yes. The insert's geometry and 80° cutting angle make it suitable for both external and internal turning operations when paired with the appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 070200 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of durable, coated carbide performance and ISO compatibility for dependable turning results; the tough SH725 grade delivers stable cutting edges and consistent chip control. Order the insert directly via Metav Werkzeuge or request advice from their consultants for exact holder compatibility. DCET 070200 SH725 Tungaloy turning insert — 7° clearance, 55° rhombic The DCET070200 SH725 is an ISO-standard indexable turning insert for external and internal turning, engineered for small-tool applications and variable engagement conditions. Coated carbide grade SH725 for edge stability 7° clearance for secure cutting geometry Rhombic insert, 55° cutting angle Cylindrical hole with 40°–60° countersink Reliable performance where small tools and changing engagements matter The DCET070200 is built from a coated carbide grade SH725, a tough, edge-stable material designed to maintain cutting integrity under fluctuating engagement. This results in improved chip control and prolonged edge life, which in turn reduces downtime for insert changes. For shops running mixed batches or short runs, the grade’s resilience offers a measurable increase in tool life and process stability without complex adjustments. Straightforward integration into ISO tool systems for consistent results As an ISO-standard insert, compatibility with the correct holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. Selecting a matching external holder or a compatible boring bar ensures secure seating and repeatable positioning. The system approach — insert, appropriate holder, shim/clamping set and replacement screws — simplifies tool logistics and standardises setups across multiple machines. Practical design features that speed up setup and reduce vibration The rhombic geometry with a 55° cutting angle and single-sided chipbreaker offers a balance between strength and accessibility for finishing and medium cutting. The 7° clearance and 2.38 mm thickness provide a secure contact surface, while the cylindrical hole with one-sided countersink (40°–60°) allows precise clamping and reliable repeatability. These details cut setup time and stabilise the cutting process, improving surface finish with fewer rework cycles. Focused suitability for turning operations and versatile system use Intended for turning—external and internal—the insert performs especially well in applications where tool overhang, small toolholders or variable depths of cut challenge edge life. The insert’s single-sided chipbreaker should be chosen to match the workpiece material and machining strategy, allowing shops to tailor the SH725 grade to their needs. The product functions as part of a complete tooling system when used with a matched holder and clamping kit, offering a pragmatic solution for production and jobbing environments. Contact Metav Werkzeuge for application guidance, availability and holder recommendations for the DCET070200 SH725 Tungaloy turning insert via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737060 SKU: 6737060-Tungaloy Manufacturer SKU: TUN6737060 Model series: ISO-Drehwendeschneidplatten Designation: DCET070200 SH725 Tungaloy-Wendeplatte Core specifications Cutting angle: 55° Clearance angle: 7° Thickness: 2.38 mm Size: 07 ISO code: 070200 Special features Coated carbide grade SH725 Rhombic insert, 55° geometry Single-sided chipbreaker Cylindrical hole + one-sided countersink (40°–60°) ISO-standard indexable turning insert Compatible with matching holder, shim/clamping set and replacement screws FAQ Which turning operations suit this insert best? The DCET070200 SH725 insert is intended for external and internal turning and excels where small tools or variable engagement require a tough, edge-stable solution. How does the SH725 grade affect tool life? The SH725 coated carbide provides enhanced edge stability and improved chip control, which typically leads to longer tool life and fewer unscheduled indexings compared with less resilient grades. What determines compatibility with my holder? Compatibility is defined by form, clearance angle, tolerance class, fastening method, size and thickness; using a holder matched to the DCET070200 geometry ensures repeatable clamping and accurate positioning. Can the insert be used for finishing as well as medium cutting? Yes — the rhombic 55° geometry with a single-sided chipbreaker provides a good compromise between robustness and accessibility, suitable for finishing and medium cutting tasks. What components are required for a complete tooling setup? A complete system comprises the indexable insert, a compatible external holder or boring bar, a shim/clamping set and replacement screws to ensure correct seating and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 070200 SH725 Wendeplatten - Tungaloy
Benefit from the combination of stable cutting-edge performance, ISO compatibility and the tough SH725 coated carbide grade for reliable turning operations; order directly via Metav Werkzeuge or ask the consultants for application advice. DCET070200 SH725 Tungaloy indexable turning insert — rhombic insert with 7° relief for general turning A DCET070200 SH725 Tungaloy indexable insert designed for external and internal turning where consistent edge life and reliable chip control are required Coated carbide grade SH725 for edge stability Rhombic shape, 55° included angle Single-sided chipbreaker for controlled chips With cylindrical hole and one-sided countersink High-performance cutting and consistent edge life The rhombic, 55° cutting-angle geometry combined with the SH725 coated carbide provides a reliable mix of toughness and wear resistance for routine and interrupted turning. The single-sided chipbreaker promotes predictable chip formation when machining a wide range of steels and alloys; this reduces recut risk and supports steady tool life. By prioritising material behaviour and edge integrity, the insert helps to maintain cycle times and reduces unexpected tool changes in batch and job-shop production. Compatibility with ISO tool systems for easy integration Designed as an ISO-standard indexable insert, the component fits holders and toolposts according to established ISO form, relief and tolerance criteria. The rhombic form and central hole geometry ensure secure seating in compatible external holders or boring bars, enabling quick index changes and repeatable positioning. This compatibility streamlines tool inventory and simplifies tool selection across turning centres that follow ISO insert standards. Geometry and clamping features that support secure mounting The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to match conventional clamping screws and shim combinations. The 7° relief minimises rubbing on the non-cutting face, while the 2.38 mm thickness delivers sufficient strength for typical cutting forces on smaller tool sizes. Together, these features ensure stable clamping, reduce the chance of vibration-induced edge damage and allow predictable performance in both external and internal turning setups. Material applications and when to choose SH725 The coated carbide grade is formulated to handle mixed cutting conditions and to offer good resistance to chipping under variable engagement. This makes the insert suitable for general-purpose turning of common steels and alloyed materials where moderate toughness and wear resistance are needed. For operations demanding extremely high-temperature resistance or ultra-high-speed finishing, a specialist grade may be considered; for robust, everyday turning tasks, the SH725 grade is an economical and technically appropriate choice. Practical selection and handling guidance Select the insert size and chipbreaker variant according to toolholder stability, depth of cut and workpiece material. The rhombic 07 size and 7° relief are particularly effective in smaller holders or where insert indexing is frequent. When fitting the component, ensure the seating surfaces and screw torque follow the holder manufacturer’s specification to secure repeatable positioning and avoid micro-movement during cutting. Proper mounting extends the effective life of the cutting edge and protects the toolholder interface. Process benefits and workshop efficiency Using a coated carbide indexable insert with controlled chip formation and predictable wear contributes to higher process reliability and reduced downtime. Consistent results from batch to batch cut down inspection time and rework. The combination of ISO conformity, a robust coating and a chipbreaker tailored for turning encourages stable machining conditions and helps keep production throughput steady in diverse workshop environments. Contact Metav Werkzeuge for advice on selecting matching holders, availability of the SH725 grade and application-specific recommendations; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6737061 Manufacturer SKU: TUN6737061 SKU: 6737061-Tungaloy Model series: ISO-turning indexable inserts Facts Thickness: 2.38 mm Relief angle: 7° Included cutting angle: 55° Size: 07 Countersink angle: 40°–60° Special features Coated carbide material Grade: SH725 Rhombic plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink ISO-compatible for external and internal turning FAQ What materials is this insert suited for? The insert with SH725 coated carbide is suitable for a broad range of steels and alloyed materials and is intended for general turning applications where toughness and edge stability are required. How does the chipbreaker affect machining? The single-sided chipbreaker on this rhombic insert promotes controlled chip formation during turning, improving swarf evacuation and reducing the risk of recutting, which supports steady tool life. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class and clamping method; the ISO designation and the central hole plus countersink align this insert with standard ISO-compatible external holders and boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 070200 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of ISO conformity, a tough, edge-stable grade and secure clamping for consistent machining results; order the DCET070200 SH725 insert directly via Metav Werkzeuge or ask the consultants for application support. DCET 070200 SH725 Tungaloy turning insert — 55° rhombic, 7° relief The DCET070200 SH725 is an ISO‑standard rhombic turning insert engineered for external and internal turning operations, offering a compact 07 format and a 55° nose angle. ISO rhombic insert DCET 07 format SH725 coated cemented carbide grade 55° nose angle, 7° relief Cylindrical hole with single-side countersink High-performance grade for stable cutting and longer tool life The insert combines a coated cemented carbide substrate with the SH725 grade, providing a balance of toughness and edge stability that supports sustained production runs. The composition and coating are selected to improve chip control under variable engagement, which reduces unexpected interruptions and contributes to predictable tool life. Using a grade that resists premature chipping is particularly advantageous in applications where small toolholders or fluctuating cut depths are common, helping to maintain component tolerances and reduce rework. Accurate fit and secure clamping for consistent results Compatibility with holders is ensured by the ISO geometry, where form, relief angle, tolerance class, fastening method, size and thickness determine correct seating. The rhombic insert with a 55° nose angle and 7° relief offers a versatile cutting geometry that balances radial strength and accessibility. The cylindrical hole with a single‑side countersink (40°–60°) delivers reliable clamping and repeatable positioning, while the 2.38 mm thickness and 07 size provide a stable platform for both finishing and light to medium turning tasks. Controlled chip formation and reduced set‑up complexity A single-sided chipbreaker aids stable chip formation in many turning scenarios; selecting the appropriate chipbreaker and grade to match the workpiece material and machining strategy is recommended. The insert’s geometry and edge characteristics are designed to produce predictable swarf evacuation, reducing the need for frequent manual intervention. Integration into a conventional system — insert, compatible external holder or boring bar, shim/insert clamp and replacement screws — keeps inventory simple and streamlines changeover times. Application guidance and process reliability Intended for ISO‑standard turning operations, the insert is suited to both external and internal turning when combined with a correctly matched holder and process parameters. Where cutting forces vary, the SH725 grade’s resilience to edge breakdown helps maintain surface finish and dimensional stability. For specific cutting data, an assessment of the chosen holder, machine rigidity and workpiece clamping is advised; adjustments to feeds and speeds, and the selection of coolant or minimum‑quantity lubrication, will influence performance and wear patterns. For reliable, application‑oriented turning, choose Tungaloy’s SH725 grade and consult Metav Werkzeuge for tailored recommendations and compatibility checks — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for further technical advice. Technical data Article number: 6737062 Manufacturer SKU: TUN6737062 Manufacturer: Tungaloy Model series: ISO‑turning inserts Designation: DCET070200 SH725 Tungaloy turning insert Material: cemented carbide Numbers / Core technical data Size: 07 Thickness: 2.38 mm Relief angle: 7° Nose angle: 55° Manufacturer item number: 6737062 Designs / Special features Rhombic insert geometry Cylindrical hole with single‑side countersink (40°–60°) Single‑sided chipbreaker Coated cemented carbide, grade SH725 ISO‑standard insert for external and internal turning Suited to small toolholders and variable engagement conditions FAQ What holder types are compatible with this insert? Compatibility is determined by ISO form, relief angle, tolerance class, fastening and insert size; the DCET070200 SH725 insert fits holders designed for DCET 07 geometry. Which machining operations are recommended for this grade? The SH725 grade is intended for turning applications and performs well in both external and internal turning, particularly where edge stability under varying conditions is required. How does the hole and countersink design affect clamping? The cylindrical hole with a single‑side countersink (40°–60°) on the DCET070200 SH725 insert ensures repeatable seating and secure clamping when used with the corresponding clamp and screw. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 070200 SH730 Wendeplatten - Tungaloy
Combining the SH730 coated carbide grade with a 55° rhombic geometry and a 7° clearance yields a robust insert that promotes stable cutting and extended edge life in general turning tasks; order directly via Metav Werkzeuge or consult our specialists for application-specific selection. DCET 070200 SH730 Tungaloy turning insert — rhombic 55°, 7° clearance DCET 070200 SH730 is an ISO‑standard rhombic turning insert engineered for external and internal turning where consistent edge life and versatile engagement conditions are required SH730 coated carbide for edge stability 55° rhombic geometry for versatile turning 7° clearance angle reduces flank rubbing Cylindrical hole with 40°–60° countersink High-performance grade for stable cutting and longer tool life The SH730 coating is a coated carbide solution designed to combine toughness with reliable wear resistance under variable cutting conditions. With the DCET070200 insert, the formulation supports improved edge stability, which reduces unexpected tool changes and helps maintain consistent cycle times on batch production runs. The result is a measurable benefit in process reliability: more parts per tool life and fewer interruptions for insert replacement. Geometry and fit that simplify holder selection A 55° rhombic profile provides a widely usable cutting edge suitable for both external and internal turning. The modest 7° clearance angle keeps flank contact low while ensuring sufficient support in the pocket. The insert's 2.38 mm thickness and the cylindrical hole with a one‑sided countersink (40°–60°) mean compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; these parameters determine stable clamping and repeatable positioning in ISO‑compliant toolholders. Practical advantages in workshop and production environments The single‑sided chipbreaker and the balanced geometry make the insert especially suitable for smaller tool setups or applications with fluctuating engagement conditions. In practice, this translates to better chip control and fewer disturbances in machining sequences. The insert is appropriate for general-purpose turning and for shops aiming to harmonise inventory: one geometry covers a range of components while reducing the variety of grades required. Selection tips and integration into machining processes For best results, select a matching external holder or boring bar rated for ISO turning inserts and verify the seat angle and clamping arrangement against the insert geometry. The combination of ISO‑standard form, coated carbide grade and the specified hole/countersink design supports straightforward replacement and predictable repeatability. If further detail is required on pairing with holders or on optimising cutting data for particular steels, Messing, rostfreier Stahl or aluminium alloys, the technical team at Metav Werkzeuge can assist with data‑driven recommendations. Contact Metav Werkzeuge for tailored selection advice on Tungaloy turning inserts and compatibility checks — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: 6856744 SKU: 6856744-Tungaloy Manufacturer SKU: TUN6856744 Model series: ISO turning inserts Designation: DCET070200 Item name: DCET070200 SH730 Tungaloy insert Material: carbide Coating/grade: SH730 Application: Turning Numbers / Core technical data Size designation: 07 Thickness: 2.38 mm Clearance angle: 7° Main angle: 55° Hole: with hole Countersink angle: 40°–60° Designs / Special features Rhombic insert geometry (55°) Cylindrical hole with one‑sided countersink (40°–60°) One‑sided chipbreaker Coated carbide grade SH730 for edge stability ISO‑compatible geometry for standard holders Suitable for external and internal turning Good performance with smaller tools and variable engagement FAQ What materials is this insert suitable for? The DCET070200 SH730 Tungaloy turning insert (SKU 6856744-Tungaloy) is a coated carbide grade intended for a broad range of materials; final selection should consider workpiece material, hardness and cutting conditions. How does the SH730 grade benefit production? SH730 provides a balance of toughness and wear resistance so the DCET070200 insert delivers improved edge stability and longer life under fluctuating engagement, reducing tool changes and improving process uptime. Which holders are compatible with this insert? Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and thickness; the insert is ISO‑standard and fits holders designed for 07 rhombic inserts with the corresponding seat geometry. Can the insert be used for internal turning? Yes — the rhombic 55° geometry and the chipbreaker design make it suitable for both external and internal turning operations when mounted in an appropriate boring bar or holder. What should be checked before replacing an insert? Verify that the holder seat and clamping screw match the DCET070200 dimensions (2.38 mm thickness, cylindrical hole and countersink), confirm clearance angle alignment and ensure the replacement grade SH730 suits the machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 070200 SH730 Wendeplatten - Tungaloy
Take advantage of the SH730 coated carbide for stable cutting edges and the standardised ISO geometry to ensure predictable, productive turning cycles; compatibility with common holders and the clear mounting details simplify tool set-up and replacement. Order the DCET070200 SH730 Tungaloy insert directly via Metav Werkzeuge or ask the consultants for application advice. DCET070200 SH730 Tungaloy indexable insert for turning (ISO, 55° rhombic) A DCET070200 SH730 indexable insert engineered for ISO-compliant external and internal turning, optimised for small toolholders and variable engagement conditions. ISO-form DCET 070200 standardised geometry Coated carbide grade SH730 for stable edges 7° clearance angle for versatile turning Cylindrical hole with 40°–60° countersink Consistent cutting performance for repeatable cycles The SH730 coating on this coated carbide plate combines toughness with edge stability, delivering consistent performance across changing engagement conditions. For production environments where tool consistency and predictable wear are priorities, the grade reduces unexpected edge failures and helps maintain component tolerances. The result is improved process reliability and measurable gains in overall machining efficiency. Clear compatibility and straightforward mounting The insert is produced to an ISO-standard geometry and a 55° rhombic form, which supports interchangeability across compatible holders. The cylindrical hole with a one-sided countersink (40°–60°) and the 7° clearance angle simplify correct seating and clamping, thereby reducing set-up time. Compatibility depends on form, clearance angle, tolerance class, attachment method, size and thickness; following these parameters ensures secure clamping and repeatable tool position. Designed for variable turning with controlled chip formation Equipped with a single-sided chipbreaker, this plate is intended for external and internal turning where controlled chip flow matters. The combination of chipbreaker geometry and the cemented carbide substrate supports stable cutting even with smaller cutters or fluctuating engagement. This improves surface finish and lowers the risk of built-up edge, making the plate suitable where a balance of productivity and finish quality is required. System-level benefits: easier handling, faster changeovers As part of a system—insert, appropriate external holder or boring bar, shim and clamping set—the plate contributes to efficient tool changes and minimal machine downtime. The Tungaloy grade is tailored for productive machining, offering good stand time and reliable performance; the standardised dimensions and hole style make replacements straightforward, supporting a cost-effective workflow and simpler inventory management for production environments. Contact Metav Werkzeuge for tailored application recommendations and to procure the DCET070200 SH730 Tungaloy indexable insert for optimised turning performance Technical Data Article number: 6856733 Manufacturer SKU: TUN6856733 Our SKU: 6856733-Tungaloy Model series: ISO turning indexable inserts Name: DCET070200 SH730 Tungaloy indexable insert Brand: Tungaloy Facts Cutting angle: 55° Clearance angle: 7° Plate size: 07 Plate thickness: 2.38 mm Countersink angle range: 40°–60° Design & features Material: cemented carbide Coating/grade: SH730 coated carbide Plate shape: rhombic, 55° lead angle Hole style: cylindrical hole with one-sided countersink Chipbreaker: single-sided Application: external and internal turning FAQ Which turning tasks is this insert intended for? The DCET070200 SH730 insert is intended for ISO-compliant external and internal turning where a tough, edge-stable grade is required; select the chipbreaker and grade to match the workpiece and cutting conditions. What mounting and holder requirements apply? Compatibility is governed by form, clearance angle, tolerance class, attachment method, size and thickness; the cylindrical hole with one-sided countersink is designed to match standard clamping screws and fixtures. How does the SH730 grade affect tool life and performance? The SH730 coating provides improved edge stability and resistance to variable engagement, which supports longer, more predictable tool life and steadier surface quality during turning. Can the plate be used with small toolholders and changing engagement? Yes, the grade is specifically described as suitable for smaller tools and fluctuating entry conditions, providing stable cutting edges under such circumstances. Is the geometry interchangeable with other ISO 070200 DCET plates? The DCET070200 follows ISO-standard geometry for this size and form, enabling interchangeability with compatible DCET holders and systems when the same tolerance and attachment specs are observed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 070200 SH730 Wendeplatten - Tungaloy
Take advantage of the coated carbide SH730 and the rhombic 07 geometry with 55° cutting angle for consistent chip control and reliable edge life; the ISO-standard design and the 7° clearance ensure compatibility with standard holders and secure clamping. Order the insert via Metav Werkzeuge or consult our technical team for holder matching and process optimisation. DCET 070200 SH730 ISO turning insert for turning – Tungaloy The DCET070200 SH730 is an ISO-standard rhombic turning insert designed for external and internal turning applications, offering a tough, edge-stable grade suited to variable engagement conditions. Coated carbide SH730 for edge stability ISO rhombic 07 geometry with 55° cutting angle 7° clearance angle for predictable cutting action Cylindrical hole with single-side countersink for secure clamping Consistent performance under changing engagement conditions The combination of a coated carbide substrate and the SH730 grade provides a balance between toughness and wear resistance that favours stable cutting when engagement depth varies. This makes the insert especially suitable for operations where interruptions, interrupted cuts or small-diameter tools are required. The coating helps reduce flank wear and maintains a sharp edge, leading to fewer indexings and longer production runs; for users unfamiliar with coating technology, this is a thin engineered layer applied to the carbide to improve surface hardness and reduce adhesion of workpiece material. Secure seating and ISO compatibility for fast tooling swaps As an ISO-standard insert, the geometry and tolerances follow industry norms so the insert locates reliably in compatible holders. The rhombic D-shape with a 55° cutting angle (D-geometry) offers access in confined areas while maintaining cutting strength. The centre feature — a cylindrical hole with a single-side countersink (40°–60°) — ensures positive location and stable clamping with the appropriate clamp set. When assembling a tooling system, match form, clearance angle, tolerance class, clamping style, size and thickness to confirm compatibility. Compact dimensions that suit small holders and precise profiles The size 07 and a plate thickness of 2.38 mm make this insert an efficient choice for compact holders and machines where rigidity is limited. The 7° clearance angle reduces rubbing on the flank and helps achieve consistent surface finish without increasing cutting forces excessively. For jobs demanding fine contours or light stock removal, the smaller geometry combined with an edge-stable grade supports repeatable results and simplified toolpath planning. Practical system guidance and typical applications Designed for external and internal turning, the insert works well with matched chipbreakers and grades chosen according to material and stability. The single-sided chipbreaker is intended for straightforward chip control in a wide range of steels and general turning tasks; select an alternative chipbreaker if specialised chip shapes are required. A complete setup typically includes the ISO insert, a suitable external holder or boring bar, a shim or clamp set and replacement screws — Metav Werkzeuge can advise on the exact holder and clamping components for the application. Contact Metav Werkzeuge for tailored holder recommendations and to source the Tungaloy DCET070200 SH730 insert for reliable, productive turning operations; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6856643 Manufacturer SKU: TUN6856643 SKU: 6856643-Tungaloy Model series: ISO turning inserts Material: Coated carbide (carbide) Grade: SH730 ISO designation: DCET070200 Facts Size: 07 Plate thickness: 2.38 mm Cutting angle: 55° Clearance angle: 7° Countersink angle range: 40°–60° Special features Rhombic plate form (D-geometry) Cylindrical hole with single-side countersink Single-sided chipbreaker ISO-standardised design for easy replacement Intended for external and internal turning Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness System components: insert, external holder or boring bar, shim/clamp set, replacement screws FAQ Is this insert suitable for interrupted cuts? The DCET070200 SH730 is designed as a tough, edge-stable grade that tolerates variable engagement and interrupted cutting better than more brittle grades, making it suitable for many interrupted-turning tasks. Which workpiece materials does the SH730 grade handle best? The SH730 coated carbide grade is optimised for a broad range of steels and general turning applications; select the chipbreaker and cutting data to match the specific material and stability of the setup. How to ensure the insert fits the holder? Compatibility depends on the insert form, 7° clearance angle, tolerance class, clamping method, size 07 and thickness 2.38 mm; verify these parameters against the holder specification before fitting. Can the same insert be used for internal turning and external turning? Yes — the rhombic 55° geometry provides access for both external and internal turning, though holder choice and overhang influence performance and should be considered. What does the centre hole and countersink provide? The cylindrical hole with a single-side countersink (40°–60°) ensures accurate location and secure clamping, reducing the risk of movement under cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 070201 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 coated cemented carbide, ISO conformity and precise geometry for reliable turning performance; the rhombic 07 shape with a 55° cutting angle and 0.1 mm corner radius ensures stable cutting edges and consistent chip control. Order the insert directly via Metav Werkzeuge or consult our application specialists for tailored machining advice. DCET 070201 SH725 indexable turning insert – for precise turning applications (Tungaloy) DCET070201 SH725 indexable insert for turning, designed for ISO-compatible holders and suited to a wide range of turning tasks Coated carbide grade SH725 Rhombic 07 geometry, 55° cutting angle 0.1 mm corner radius, 7° clearance angle Single-sided chipbreaker, hole with countersink Stable cutting-edge performance for variable cutting conditions The DCET070201 SH725 insert is a compact, ISO-standardised indexable turning insert optimised for consistent edge stability under changing load conditions. The SH725 coating and substrate combination provides a balance of toughness and wear resistance, which supports long tool life, especially with smaller toolholders or interrupted cuts. The rhombic geometry and 55° approach angle deliver a controlled cutting force vector, reducing vibration and helping to maintain dimensional accuracy during external and internal turning operations. Clear compatibility guidance and practical holder considerations Compatibility with the chosen holder depends on the insert form, 7° clearance angle, tolerance class, clamping style, size and thickness. The insert’s ISO designation simplifies selection: match the rhombic 07 shape and 2.38 mm thickness to the corresponding ISO turning holder or boring bar. The central hole (cylindrical) with a one-sided countersink (40°–60°) enables secure clamping and repeatable seating; ensure the correct screw and shim combination for optimal seat contact and torque distribution. Improved chip control and material versatility A single-sided chipbreaker tailored to the SH725 grade promotes predictable chip formation across a broad range of steels and general turning applications. The coated cemented carbide substrate aids surface finish and reduces edge wear when machining varied materials; choose the chipbreaker and grade to suit workpiece material and cutting parameters. The moderate 0.1 mm corner radius supports fine edge strength without compromising the ability to produce close tolerances and fine surface quality. Workshop productivity and economical advantages Using standardised ISO inserts reduces tooling complexity and shortens reconditioning cycles. The combination of a robust coating, predictable chip control and compact geometry results in fewer unplanned tool changes and steadier cycle times, which contributes to production reliability and cost-efficiency. For operations requiring frequent insert changes or mixed batch sizes, this insert’s repeatable clamping and ISO conformity help maintain process stability and simplify inventory management. For tailored recommendations on integrating the DCET 070201 SH725 insert into production or to secure supply via Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application support and ordering. Technical data Article number: 6737068 Manufacturer SKU: TUN6737068 SKU: 6737068-Tungaloy Label: DCET070201 SH725 Tungaloy-Wendeplatte Core dimensions Size: 07 Cutting angle: 55° Clearance angle: 7° Thickness: 2.38 mm Corner radius: 0.1 mm Design & special features Rhombic insert shape Coated cemented carbide (grade SH725) Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO turning indexable insert for external and internal turning FAQ What materials is this insert suitable for? The insert, graded SH725 and made from coated cemented carbide, is intended for a broad range of turning tasks and is particularly effective on common steels and general turning applications. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert improves chip control and evacuation, aiding surface finish and avoiding long, tangled chips during typical turning operations. Which holder features must match the insert? Holder compatibility requires matching the rhombic 07 form, 7° clearance angle, correct tolerance class, clamping method, insert size and 2.38 mm thickness to ensure secure and repeatable seating. Can this insert be used for internal and external turning? Yes, the insert’s geometry and ISO conformity make it suitable for both external and internal turning; choose the appropriate boring bar or external holder for the respective operation. What does the central hole and countersink provide? The cylindrical central hole with a one-sided countersink (40°–60°) enables positive clamping and reliable repeatability, simplifying insert changes and ensuring stable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DCET 070201 SH725 Wendeplatten - Tungaloy
Take advantage of a tough, coated carbide grade and a compact, ISO‑compliant geometry to secure consistent edge life and precise turning results; order directly via Metav Werkzeuge or consult our technical team for application support. DCET 070201 SH725 turning insert — rhombic 07, 55° approach, coated carbide by Tungaloy The DCET070201 SH725 is an ISO‑standard rhombic insert designed for external and internal turning, offering a compact geometry and an edge‑stable coated carbide grade for variable engagement conditions. Coated carbide grade SH725 ISO rhombic 07, 55° approach 0.1 mm corner radius precision Cylindrical hole with countersink Consistent cutting performance from a tough coated carbide This indexable insert is built from carbide with the SH725 coating grade, a combination engineered for edge stability under changing engagement conditions. The coating improves wear resistance while maintaining toughness, which leads to fewer edge failures during intermittent or unstable cuts. For manufacturers seeking reproducible results on short‑run turning tasks, this combination reduces downtime through extended insert life and more consistent surface finish. The material properties also mean that chip formation remains predictable when the correct chipbreaker and grade are selected for the workpiece and machining stability. Geometry engineered for precision and secure mounting The insert’s rhomboid 07 form with a 55° approach angle and a 0.1 mm corner radius provides a balance between strength and finish capability. A small radius aids in achieving fine surface quality and accurate dimensional control, while the 7° clearance (facing) minimises rubbing. The plate thickness of 2.38 mm and the cylindrical hole with a one‑side countersink (40°–60°) ensure reliable clamping in compatible holders; compatibility is determined by form, relief angle, tolerance class, fastening and size. Because the insert conforms to ISO norms, replacement and tool‑holder matching are simplified, which supports predictable machine set‑ups and repeatable processes. System perspective and selection guidance for efficient turning The insert forms part of a modular system comprising an insert, matching outer holder or boring bar, a shim/clamp set and fastening screws. Select the single‑side chipbreaker variant that matches the chosen grade and the intended operation to optimise chip control and cutting forces. For less experienced teams, choosing the correct chipbreaker and cutter grade is the critical step to unlock the productivity advantages of the geometry and coating. If further machining data or recommendations for holder selection are required, consult the product documentation or our technical advisors for confirmation of compatibility and best practice for set‑up. For precise, productive turning with Tungaloy reliability choose the DCET 070201 SH725 insert; contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737065 Manufacturer SKU: TUN6737065 Dealer SKU: 6737065-Tungaloy Model series: ISO‑turning inserts Facts Thickness: 2.38 mm Corner radius: 0.1 mm Approach angle: 55° Clearance angle: 7° Size: 07 Special features Coated carbide grade SH725 Rhombic plate form Cylindrical hole with one‑side countersink (40°–60°) Single‑side chipbreaker ISO‑standard insert for external and internal turning FAQ What types of turning are suitable with this insert? The DCET 070201 SH725 insert is intended for both external and internal turning operations; selection of chipbreaker and grade should match the workpiece material and stability of the set‑up. How does the SH725 grade affect performance? The SH725 coated carbide grade provides improved edge stability and wear resistance, which helps maintain tool life and surface finish under varying engagement conditions. What does the plate geometry mean for holder compatibility? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the ISO‑standard rhombic 07 shape ensures broad holder availability for the insert. Can the insert be used for interrupted cuts? Yes; the combination of a tough substrate and the SH725 coating is intended to tolerate unstable or intermittent cut conditions, provided the correct chipbreaker is selected. Which components complete the system for mounting this insert? A matching outer holder or boring bar, a shim/clamp set and the appropriate replacement screws form the complete system required to mount and secure this insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com