CPMT 09T302 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide wear resistance, an 80° rhombic geometry for secure engagement, and a compact 0.2 mm corner radius for precise finishes — order the insert directly via Metav Werkzeuge or consult our application advisers for process-specific recommendations. CPMT 09T302 AH8015 rhombic indexable insert for turning — Tungaloy CPMT 09T302 AH8015 is an ISO‑standard rhombic turning insert designed for external and internal turning of heat‑resistant alloys and similar demanding materials ISO rhombic insert, 80° cutting angle PVD‑coated carbide grade AH8015 0.2 mm corner radius for fine finishing Single‑sided chipbreaker with central hole Consistent cutting performance where process reliability matters The insert delivers a predictable cutting result thanks to its 80° geometry and PVD‑coated carbide construction. The 80° rhombic shape provides robust engagement and stability on external and internal turning operations, while the AH8015 grade balances wear resistance and edge stability for long tool life. These technical choices reduce the need for frequent insert changes and support steady cycle times, helping to maintain throughput in production environments. Optimised edge form and surface quality for tighter tolerances With a 0.2 mm corner radius and a single‑sided chipbreaker, the geometry is tailored for finishing and moderate roughing, producing consistent surface finishes with minimal vibration. The 11° relief angle and 3.97 mm plate thickness contribute to a secure seating in compatible holders, which in turn preserves dimensional accuracy. For components that demand repeatable surface integrity, the combination of small corner radius and PVD coating helps to safeguard the cutting edge against thermal softening and edge rounding. Clear compatibility and secure clamping for straightforward integration The insert follows ISO standards for form, relief angle, tolerance class, attachment and thickness, so compatibility with holders is determined by those parameters. The central cylindrical hole with a single‑side countersink (40°–60°) enables standard clamp or screw fixation in ISO‑compliant external holders or boring bars. Typical system assemblies include the insert, a matching external holder or boring bar, a shim or clamping set and replacement screws — this modular approach simplifies stock management and reduces setup times. Practical benefits for workshop productivity and material versatility This grade is specified as a first choice for machining heat‑resistant alloys, offering a pragmatic balance between edge stability and wear performance. The PVD coating enhances tool life under elevated temperatures, which is particularly valuable when machining alloys with lower thermal conductivity. Selecting the appropriate chipbreaker and matching the insert geometry to the machining stability and feed conditions yields measurable improvements in cycle consistency and component quality. For application advice, batch availability or to discuss which holder pairs best with the Tungaloy AH8015 insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for practical guidance and fast supply. Technical data Manufacturer article number: 6951212 Manufacturer SKU: TUN6951212 Brand: Tungaloy Model series: ISO turning inserts Designation: CPMT09T302 AH8015 Core specifications Insert size: 09 Cutting angle: 80° Corner radius: 0.2 mm Relief angle: 11° Thickness: 3.97 mm Hole: cylindrical with single‑side countersink 40°–60° Grade: AH8015 Coating / substrate: PVD‑coated carbide Features and application Geometry: rhombic (CPMT) Chipbreaker: single‑sided Typical use: external and internal turning Intended material focus: heat‑resistant alloys System components: insert, external holder or boring bar, shim/clamping set, replacement screws Compatibility criteria: form, relief angle, tolerance class, attachment, size and thickness FAQ What materials is this insert best suited for? The CPMT 09T302 AH8015 insert is specified as a first choice for heat‑resistant alloys; the AH8015 grade and PVD coating provide a balance of wear resistance and edge stability for these materials. How is the insert secured in the holder? The insert uses a central cylindrical hole with a single‑side countersink (40°–60°) for clamp or screw mounting; compatibility requires matching form, relief angle, tolerance class, size and thickness with the chosen ISO‑compliant holder. What surface finish can be expected with a 0.2 mm corner radius? A 0.2 mm corner radius supports fine finishing and consistent surface quality when combined with an appropriate feed rate and the single‑sided chipbreaker, helping to reduce vibration and produce repeatable results. Is this insert suitable for both external and internal turning? Yes, the rhombic geometry and indexed design are suitable for both external and internal turning operations when the holder and process parameters are matched to the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 09T302 AH8015 Wendeplatten - Tungaloy
Reliable productivity and consistent edge stability make this PVD‑coated carbide insert a solid choice for demanding turning tasks; compatible with ISO holders when matched by form, clearance and thickness. Order the CPMT09T302 AH8015 directly via Metav Werkzeuge or consult the team for holder and chipbreaker recommendations. CPMT09T302 AH8015 Tungaloy turning insert (ISO 09T302, PVD‑coated) CPMT09T302 AH8015 is a PVD‑coated carbide ISO turning insert designed for general and heat‑resistant alloy turning applications, offering balanced wear resistance and edge stability. ISO rhombic insert CPMT 09T302, 11° clearance PVD‑coated AH8015 carbide for heat‑resistant alloys Cylindrical hole with single‑side countersink 40°–60° 0.2 mm corner radius and 3.97 mm plate thickness Proven wear control for heat‑resistant alloys The combination of a PVD‑coated surface and carbide substrate in grade AH8015 delivers a reliable compromise between wear resistance and edge stability, making the insert suitable for sustained cutting of high‑temperature alloys. This balance reduces unscheduled tool changes and supports a consistent surface finish during medium‑duty and finishing cuts. Where thermal loads rise, the coating extends tool life by resisting abrasive and adhesive wear mechanisms typical of alloy machining. Secure clamping and straightforward holder matching As an ISO‑standard, rhombic insert with an 11° clearance and an 80° included angle, the component is engineered for predictable positioning in compatible toolholders. The central cylindrical hole with a single‑side countersink (40°–60°) facilitates standard clamping systems; the insert's 0.2 mm radius and 3.97 mm thickness ensure repeatable seat and clearance when the seat form, tolerance class and fastening method of the holder are correctly matched. Correct holder selection and torque settings result in stable cutting conditions and reduced vibration. Practical system benefits and application guidance The single‑sided chipbreaker geometry favours controlled chip formation in both external and internal turning operations, especially when paired with an appropriately rigid setup. The insert forms part of a system including the holder, underlay/clamp set and replacement screws; attention to system rigidity and feed choice is essential to exploit the grade's performance. For general turning of heat‑resistant alloys and other demanding materials, the insert offers repeatable performance and ease of integration into established ISO tool systems. Contact Metav Werkzeuge for tailored advice on holder compatibility and chipbreaker selection for the CPMT09T302 AH8015 insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6775783 Manufacturer SKU: TUN6775783 Model series: ISO‑Drehwendeschneidplatten Manufacturer: Tungaloy Numbers / Core technical data Corner radius: 0.2 mm Plate thickness: 3.97 mm Relief/clearance angle: 11° Included angle: 80° Plate size: 09 Designs / Special features PVD‑coated carbide (AH8015) Rhombic plate form (CPMT) Cylindrical hole with one‑side countersink (40°–60°) Single‑sided chipbreaker Intended application: Turning ISO designation: CPMT09T302 FAQ Which materials are recommended for this insert? The CPMT09T302 AH8015 Tungaloy turning insert is optimised for heat‑resistant alloys and general turning tasks where the AH8015 grade provides balanced wear resistance and edge stability. How is the insert clamped in a holder? The insert uses a central cylindrical hole with a one‑side countersink; correct clamping requires a holder compatible with the ISO CPMT form and the 11° clearance, as with the CPMT09T302 AH8015 Tungaloy insert (SKU TUN6775783). Can this insert be used for internal turning? Yes; the insert geometry and single‑sided chipbreaker allow use in both external and internal turning operations when combined with a suitably rigid boring bar and correct cutting parameters. What does the AH8015 grade mean for tool life? The AH8015 PVD‑coated carbide grade offers a compromise between wear resistance and edge stability, yielding predictable tool life in alloy machining compared with uncoated grades. Which chipbreaker should be chosen for better chip control? Chipbreaker selection should match workpiece material, feed and depth of cut; the CPMT09T302 AH8015 comes with a one‑sided chipbreaker suited to controlled chips in most turning scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 09T302 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of an NS9530 uncoated cermet grade and ISO-standard CPMT09T302 geometry for reliable finishing cuts and low cutting forces; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. CPMT 09T302 NS9530 CPMT — Turning insert for fine finishing, Tungaloy A CPMT09T302 NS9530 indexable insert engineered for precision external and internal turning, optimised for finishing of steel with low cutting forces and an emphasis on surface quality ISO indexable insert CPMT 09T302 NS9530 Uncoated cermet for fine finishing Rhombic shape, 80° cutting edge 0.2 mm corner radius, single-sided chipbreaker Exceptional surface quality for finishing operations The insert is manufactured from uncoated cermet (NS9530), a grade designed specifically as a finishing material for steel. This composition provides a sharp cutting edge and reduced cutting forces, which together lower the mechanical stress on the workpiece and the toolholder. The outcome is a consistently improved surface finish and fewer secondary operations. For continuous cuts and small depths of cut the material-grade selection minimises burr formation and supports predictable, tight tolerances. The described behaviour is particularly relevant for precision turning where consistent part finish and short cycle-time variability are priorities. Secure, ISO-standard compatibility with conventional holders Compatibility with clamping systems follows ISO conventions: form, clearance angle, tolerance class, fastening method, size and thickness determine interchangeability. The insert’s ISO designation (CPMT09T302) and its rhombic geometry ensure straightforward matching to common external holders and boring bars. Because the system comprises the insert, a corresponding external holder or boring bar, backing pad or clamp set and replacement screws, workshops benefit from rapid changeovers and reproducible seating. This standardisation reduces setup time and the risk of incorrect mounting, supporting stable machining processes and less rework. Stable clamping and controlled chip formation Mechanical details such as the cylindrical location hole with single-sided countersink (40°–60°) and a plate thickness of 3.97 mm provide robust seating and repeatable clamping. The combination of an 80° cutting edge and a 0.2 mm corner radius keeps the cutting line stable while the single-sided chipbreaker promotes predictable chip flow during finishing passes. These characteristics assist in maintaining a durable cutting edge and in preventing unstable chip patterns that could affect surface integrity. For short, uninterrupted cuts this configuration delivers consistent results with minimal manual intervention. Practical application guidance for turning shops The geometry and grade are aimed at external and internal turning where surface quality is critical. The insert is particularly suited to finishing operations on steel using small depths of cut and continuous feed conditions. Selection of the correct chipbreaker and grade should match the workpiece material, machining mode and machine-tool rigidity to fully exploit the insert’s advantages. In production environments this leads to fewer part rejections and a smoother production flow, while smaller shops gain the benefit of easier process setup and reduced trial-and-error. For precision finishing on steel, request availability of the Tungaloy CPMT09T302 NS9530 insert from Metav Werkzeuge or contact the Metav Werkzeuge technical advisors at info@metav-werkzeuge.com or +49 2822 7131930 to verify suitability for the intended application Technical Data Article number: 6951213 SKU: 6951213-Tungaloy Manufacturer SKU: TUN6951213 Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Size: 09 ISO code: 09T302 Plate thickness: 3.97 mm Clearance angle: 11° Cutting edge angle: 80° Corner radius: 0.2 mm Special features ISO designation CPMT09T302 Rhombic plate form Cylindrical hole with single-sided countersink (40°–60°) One-sided chipbreaker Uncoated cermet grade NS9530 Intended use: turning (external and internal) Suitable for finishing of steel FAQ What machining tasks is this insert best suited for? The CPMT09T302 NS9530 insert is optimised for finishing operations in turning, providing low cutting forces and a high-quality surface on steel components. Is the insert compatible with standard ISO holders? Yes, the insert’s ISO designation and geometry allow compatibility with ISO-standard external holders and boring bars when the holder matches form, clearance angle, tolerance class, fastening and size. What does the NS9530 grade offer compared with coated grades? NS9530 is an uncoated cermet finishing grade offering a very sharp cutting edge and lower cutting forces, which favours surface quality in continuous, small-depth cuts. Does the design support stable clamping and repeatable seating? The cylindrical locating hole with a single-sided countersink and the 3.97 mm plate thickness ensure stable seating and repeatable clamping for reliable process security. Which chip control characteristics can be expected? The single-sided chipbreaker is designed to promote predictable chip flow during finishing passes, reducing the likelihood of unstable chip formation that can affect surface integrity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 NS9530 Wendeplatten - Tungaloy
Benefit from a combination of high-precision finishing and reliable chip control: the uncoated NS9530 cermet provides a sharp cutting edge and low cutting forces for excellent surface quality, while the ISO rhombic geometry ensures broad holder compatibility. Order the CPMT09T302 insert directly via Metav Werkzeuge or consult our team for selection support. CPMT09T302 NS9530 Tungaloy indexable turning insert — rhombic ISO insert for finishing (turning) The CPMT09T302 NS9530 Tungaloy insert is a rhombic ISO turning insert designed for finishing operations in steel, offering a sharp cutting edge and a one-sided chipbreaker for consistent surface quality. ISO rhombic insert, 80° geometry Uncoated cermet grade NS9530 Sharp edge for superior surface finish 0.2 mm corner radius and 11° clearance Precision finishing performance for steel turning The insert is specially developed as a finishing grade for steel, with the uncoated NS9530 cermet delivering a consistently sharp cutting edge and low cutting forces. This results in reduced vibration and improved surface integrity when performing external and internal turning with small depths of cut. The rhombic geometry and an included angle of 80° support repeatable profile accuracy, which is particularly valuable where tight dimensional tolerances and high-quality surfaces are required. The design targets continuous cuts and fine feed rates, where minimal edge wear translates directly into longer intervals between indexings and more predictable component finish. Compatibility and holder considerations for reliable installation Compatibility with toolholders is governed by the insert form, clearance angle, tolerance class, fastening method, size and thickness. The ISO designation and the rhombic form make the insert broadly compatible with standard external holders and boring bars that accept 09-size plates, while the cylindrical hole with a single-side countersink (40°–60°) facilitates secure clamping and accurate seating. The plate thickness of 3.97 mm and the 0.2 mm corner radius should be matched to the machine stiffness and workpiece support to maintain stable cutting conditions. Explaining these parameters helps in choosing a holder and tightening sequence that preserve geometry and avoid slippage during finishing passes. Practical benefits in machining and process planning Using a finishing-grade cermet insert reduces cutting forces and generally improves surface finish compared with more general-purpose grades, so cycle times can be optimised without compromising quality. The one-sided chipbreaker promotes predictable chip formation for continuous cuts, lowering the risk of surface damage and improving downstream handling. For process planners this means fewer corrective passes and a more consistent first-time-right yield. As a rational choice, the geometry and grade combination offers a favourable balance between tool life and part quality for small depth-of-cut, high-surface-finish operations. Handling recommendations and material considerations The grade is most effective on steels under continuous cutting conditions and smaller depths of cut; interrupted cuts or heavy roughing are not its primary use case. When fitting the insert, ensure the correct seating on the clamp and adherence to the holder manufacturer’s torque recommendations to maintain the intended 11° clearance and positional accuracy. The insert’s NS9530 grade and rhombic shape contribute to predictable wear patterns, simplifying tool change intervals and inventory planning. For applications requiring other material compatibility or higher toughness, consider alternative grades or geometries suited to heavier engagements. For finishing-oriented turning tasks, choose the Tungaloy CPMT09T302 NS9530 insert through Metav Werkzeuge — contact our consultants for application-specific advice at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6945224 Manufacturer SKU: TUN6945224 Model series: ISO-Drehwendeschneidplatten ISO designation: CPMT09T302 Brand: Tungaloy Facts Insert size: 09 Included angle: 80° Corner radius: 0.2 mm Clearance (relief) angle: 11° Plate thickness: 3.97 mm Hole: cylindrical hole with single-side countersink (40°–60°) Features Cutting material type: uncoated cermet (NS9530) Chipbreaker: one-sided Plate shape: rhombic Typical application: external and internal turning (finishing) Compatibility note: Holder fit determined by form, clearance, tolerance, fastening, size and thickness FAQ What applications is this insert best suited for? The CPMT09T302 NS9530 Tungaloy insert is intended for finishing operations in steel, providing a sharp cutting edge and low cutting forces for high surface quality in external and internal turning. How does the NS9530 grade affect surface finish and tool life? The uncoated NS9530 cermet grade favours a sharp edge and low cutting forces, improving surface finish in continuous cuts; tool life is optimised for fine finishing rather than heavy interrupted machining. Which holders are compatible with this ISO plate? Compatibility depends on form, clearance, tolerance class, fastening, size and thickness; the ISO rhombic form and the cylindrical hole with countersink enable use with standard holders designed for 09-sized rhombic inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp uncoated cermet grade and precise rhombic geometry for outstanding surface finish and low cutting forces; the 80° angle and 0.2 mm corner radius support reliable finishing in steel turning. Order the CPMT09T302 NS9530 insert directly via Metav Werkzeuge or consult our specialists for application advice. CPMT09T302 NS9530 — ISO rhombic turning insert, 80° by Tungaloy A CPMT09T302 NS9530 insert for turning, optimised for fine finishing of steel and continuous cuts with low cutting forces. ISO rhombic insert for turning, 80° angle Uncoated cermet grade NS9530 for fine finishing Single-sided chipbreaker for continuous cuts Cylindrical hole with one-side countersink High-quality finishing with an uncoated cermet grade The insert is made from an uncoated cermet intended as a finishing grade for steel, which results in a sharp cutting edge and reduced cutting forces. This leads to improved surface integrity on turned parts and less tendency for built-up edge during continuous cutting conditions. The material choice and edge geometry make the component particularly suitable where small depths of cut and a high-quality surface are required; predictable wear behaviour supports consistent batch-to-batch quality. The combination of a fine cutting edge and the NS9530 grade ensures efficient finishing without the need for coated alternatives in many standard steel applications. Precise geometry and holder compatibility for repeatable results Designed as an ISO rhombic insert with an included angle of 80° and a clearance (relief) angle of 11°, the plate provides stable contact and controlled chip flow when mounted in compatible holders. The 0.2 mm corner radius balances edge strength and surface finish, while the plate thickness of 3.97 mm contributes to rigidity in the tool assembly. The insert features a cylindrical hole with a one-side countersink (40°–60°) for secure clamping; compatibility with a toolholder is determined by form, relief, tolerance class, fastening method, size and thickness. These characteristics result in dependable seating and repeatable positioning, which are essential for maintaining tolerances in serial production. Practical application guidance and performance advantages This turning insert performs best in external and internal finishing operations on steel where continuous cutting and smaller cut depths are typical. The single-sided chipbreaker is matched to the grade and intended cutting conditions to promote stable chip formation and easy evacuation. For machining strategy, select a chipbreaker and holder that suit the workpiece stability and cutter overhang; the combination of low cutting forces and sharp edge reduces vibration sensitivity and often improves tool life in stable setups. The insert is supplied as part of a system that includes a compatible holder, backing pad or clamping set and replacement screws, where correct matching yields the most reliable process performance and surface results. For precise finishing in steel turning, choose the CPMT09T302 NS9530 insert from Tungaloy via Metav Werkzeuge or ask our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for tailored recommendations. Technical data Article number: 6951182 Dealer SKU: 6951182-Tungaloy Manufacturer SKU: TUN6951182 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Core dimensions Size: 09 Thickness: 3.97 mm Included angle: 80° Clearance (relief) angle: 11° Corner radius: 0.2 mm Hole: with hole Design & special features Rhombic plate form Uncoated cermet grade NS9530 Single-sided chipbreaker Cylindrical hole with one-side countersink (40°–60°) For external and internal turning Compatible with ISO-standard holders Optimised for continuous cuts and small depths of cut FAQ What materials is this insert intended for? The CPMT09T302 NS9530 is a finishing grade developed for machining steel; its uncoated cermet composition achieves low cutting forces and an excellent surface finish on typical steel applications. Which geometry and angles does the insert use? This ISO rhombic insert has an included angle of 80° and a relief angle of 11°, with a 0.2 mm corner radius and a plate thickness of 3.97 mm for stable mounting and consistent cutting behaviour. How does the NS9530 grade perform compared with coated grades? The NS9530 uncoated cermet offers a very sharp edge and reduced cutting forces that are advantageous for finishing and continuous cuts; coated grades may be preferable for higher-temperature or interrupted cutting conditions. What chip control does the plate provide? The insert features a single-sided chipbreaker designed to produce stable chip formation in finishing operations, helping to maintain surface quality and reduce the risk of chip-related issues. How is the insert identified for ordering? Order using the designation CPMT09T302 NS9530 (Tungaloy) or the article number 6951182; the manufacturer SKU is TUN6951182 for unambiguous identification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade and ISO compatibility for consistent machining of stainless steel; the robust chipformer and 0.2 mm corner radius deliver reliable surface quality and predictable tool life. Order the insert directly via Metav Werkzeuge or contact the consultants for application-specific advice. CPMT 09T302 T6215 insert for Turning — Tungaloy CPMT09T302 is an ISO rhombic turning insert designed for reliable external and internal turning, optimised for stainless-steel applications under stable to slightly interrupted cutting conditions. ISO rhombic insert, size 09 CVD-coated carbide grade T6215 0.2 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Consistent wear resistance for stainless-steel turning The CVD-coated carbide grade provides enhanced wear resistance, making it suitable for continuous operations and short interruptions when machining stainless steel. The chosen coating and substrate combination reduces flank wear and maintains a stable cutting edge, which leads to more predictable tool life and fewer unscheduled tool changes. As a result, process stability improves and production throughput becomes more reliable. Secure seating and repeatable clamping for accuracy Designed to ISO dimensions, the rhombic geometry and defined relief ensure precise seating in compatible holders; factors such as form, 11° relief, tolerance class, mounting type, plate size 09, and 3.97 mm thickness determine compatibility. The cylindrical hole with a single-sided countersink (40°–60°) offers secure clamping and uniform screw preload, reducing micro-movements during heavy cuts and supporting repeatable part accuracy across batches. Productivity gains through optimised chip control and edge form The one-sided chipbreaker and the T6215 grade promote stable chip formation when turning typical workpiece materials, helping to avoid built-up edge and minimise surface defects. The 0.2 mm corner radius supports fine finishing and dimensional control at moderate feed rates, while the robust cutting edge resists chipping in slightly interrupted cuts. Together, these characteristics reduce rework and deliver consistent surface quality. Practical selection and system integration advice For best results, pair the insert with a matching ISO external holder or boring bar, the correct shim or clamp set, and the specified mounting screw. Select the chipbreaker and grade according to workpiece stability and the intended operation (external or internal turning). The insert is part of a straightforward system that simplifies tool changes and helps maintain cycle-time reliability in high-mix or repetitive turning tasks. For availability, cutting data and tailored recommendations for the CPMT 09T302 T6215 insert, contact Metav Werkzeuge for local stock and technical support at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6951178 Manufacturer SKU: TUN6951178 Stock SKU: 6951178-Tungaloy Model series: ISO turning inserts Core specifications Plate designation: CPMT09T302 Grade / coating: T6215 (CVD-coated carbide) Plate size: 09 Plate thickness: 3.97 mm Relief angle: 11° Corner radius: 0.2 mm Included angle: 80° Design & features Plate shape: rhombic Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: one-sided Substrate material: carbide Application: turning, suitable for stainless steel FAQ What materials is this insert suitable for? The CPMT09T302 insert with T6215 coating is intended primarily for machining stainless steel and similar alloys under stable to lightly interrupted conditions. Which holder types are compatible with this ISO rhombic insert? Compatibility depends on holder form, tolerance class, mounting method and plate thickness; use ISO rhombic external holders or boring bars designed for size 09 inserts. How does the T6215 coating benefit machining? The T6215 CVD-coated carbide provides improved wear resistance and a stable cutting edge, which helps to extend tool life and maintain surface finish during stainless-steel turning. What influence does the 0.2 mm corner radius have on part finish? A 0.2 mm corner radius supports fine surface finishing and better dimensional control at moderate feeds, while still offering some robustness against minor interruptions. What is the SKU and article number for ordering? The insert is listed as SKU 6951178-Tungaloy with article number 6951178 (manufacturer SKU TUN6951178). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant CVD coating, ISO compatibility and precise geometry for reliable turning results; the insert supports stable chip control and long edge life. Order the CPMT09T302 T6215 turning insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. CPMT 09T302 T6215 — Tungaloy indexable turning insert for turning, CVD-coated carbide, 0.2 mm The CPMT09T302 T6215 is an ISO-form indexable insert designed for external and internal turning; its geometry and grade suit stainless-steel machining under stable to slightly interrupted conditions. CVD-coated carbide for high wear resistance Optimised for stainless-steel turning Rhombic 80° shape, 11° relief angle Single-sided chipbreaker for reliable chips Cylindrical hole with countersink 40°–60° Consistent machining performance through a wear-resistant grade The combination of a CVD-coated carbide substrate and the T6215 grade delivers improved resistance to abrasive and adhesive wear when machining stainless steels. This means longer intervals between index changes and a predictable edge life, which supports stable cycle times and reduced process interruptions. The coated substrate reduces flank wear and helps maintain surface finish quality over longer tool life, translating into lower overall operating costs for medium to high-volume turning. Geometric design that enhances dimensional accuracy The rhombic plate with an 80° included angle and an 11° relief provides a balance between strength and accessibility for diverse turning tasks. The small 0.2 mm nose radius helps achieve fine detail and tight tolerances while the plate thickness of 3.97 mm ensures sufficient support in the holder for stable cutting. Together, these geometric features improve repeatability and help maintain consistent workpiece dimensions even under moderate interruptions. Practical compatibility and handling for workshop use The insert follows the ISO designation and is compatible with holders according to form, clearance angle, tolerance class, fastening method, size and thickness. The single-sided chipbreaker is matched to the grade to promote controlled chip formation during turning, easing chip evacuation and reducing heat concentration. The cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and easy replacement. For best results, choose the chipbreaker and grade according to the workpiece material and the rigidity of the set-up. Contact Metav Werkzeuge today to discuss how the Tungaloy CPMT09T302 T6215 insert can improve process reliability on stainless-steel turning operations; Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and ordering. Technical data Article number: 6951210-Tungaloy Manufacturer SKU: TUN6951210 Manufacturer article number: 6951210 Brand: Tungaloy Model series: ISO turning indexable inserts Core technical data Corner / nose radius: 0.2 mm Included angle: 80° Relief (clearance) angle: 11° Plate thickness: 3.97 mm Plate size: 09 Hole style: with hole Special features Carbide substrate, CVD-coated grade T6215 ISO designation: CPMT09T302 Rhombic plate form Single-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) Suited for turning (external and internal), recommended for stainless steels under stable to slightly interrupted conditions Compatibility determined by form, relief, tolerance class, fastening, size and thickness FAQ What materials is this insert recommended for? The CPMT09T302 T6215 insert is recommended primarily for stainless steels, where its CVD-coated carbide grade T6215 provides wear resistance and good surface finish under stable cutting conditions. Which toolholders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; the CPMT09T302 follows ISO conventions and fits holders made for CPMT-style rhombic inserts. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert promotes controlled chip formation and evacuation during turning, reducing the risk of built-up edge and improving process stability with the T6215 grade. Is the insert suitable for interrupted cuts? The insert is designed for stable to slightly interrupted conditions; heavy interruptions may require a different geometry or a tougher grade. How should the nose radius be chosen for precision tasks? The 0.2 mm nose radius offers fine detail and tighter tolerance control; for heavier stock removal a larger radius would be preferable, but that changes the cutting forces and may affect finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide (T6215), ISO conformity and a precise 0.2 mm corner radius for consistent performance when turning stainless steels; order the CPMT09T302 T6215 insert directly via Metav Werkzeuge or request advice from the technical team if additional compatibility information is required. CPMT09T302 T6215 — ISO rhombic turning insert for stable stainless-steel machining by Tungaloy The CPMT09T302 T6215 is a rhombic, ISO‑design insert intended for external and internal turning of stainless steels under stable to lightly interrupted conditions CVD-coated carbide for wear resistance Optimised for stainless steel turning Rhombic 80° geometry, 0.2 mm radius ISO size 09 with central hole Consistent tool life through proven coating and grade The combination of a CVD‑coated carbide grade T6215 and an ISO‑compliant geometry provides a predictable wear pattern and extended service intervals. The coating reduces flank and crater wear when machining demanding alloys, which translates into fewer tool changes and reduced machine downtime. Compatibility with holders is determined by form, clearance angle (11°), tolerance class, clamping method, size and thickness (3.97 mm), ensuring the insert seats reliably in standard toolholders and supports repeatable cutting conditions for batch and single‑part production. Geometry that balances finish and material removal An 80° included angle and a 0.2 mm corner radius deliver a balance between strength and surface quality: the larger included angle increases cutting edge robustness while the small radius helps achieve fine surface finishes and tight dimensional control. The insert features a single-sided chipbreaker and a central bore with a cylindrical hole plus a one‑sided countersink (40°–60°), improving chip control and clamping stability. As a consequence, cycle times can be optimised without compromising component tolerances or surface integrity. Practical application and process guidance for reliable productivity Designed for turning, this ISO rhombic insert suits workshops seeking stable, repeatable machining of stainless steels with a focus on productivity. Selecting the correct chipbreaker and grade for the part geometry and machine rigidity will enhance process security and decrease scrap rates. The insert’s construction supports straightforward inventory management through ISO standardisation, while the CVD coating contributes to consistent edge retention under moderate interruptions typical in production environments. For process‑critical turning operations choose the Tungaloy CPMT09T302 T6215 insert for its wear resistance and ISO compatibility — contact Metav Werkzeuge for a technical consultation or to place an order via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6945223-Tungaloy Manufacturer SKU: TUN6945223 Manufacturer article number: 6945223 Label: CPMT09T302 T6215 Tungaloy-Wendeplatte Facts Included angle: 80° Clearance angle: 11° Corner radius: 0.2 mm Thickness: 3.97 mm Size designation: 09 Special features CVD‑coated carbide (T6215) ISO rhombic insert, designation CPMT09T302 Single-sided chipbreaker Central hole: cylindrical bore + one-sided countersink (40°–60°) Application: external and internal turning, stainless steels FAQ What materials is this insert designed for? The CPMT09T302 T6215 insert is specified for machining stainless steels; the CVD‑coated T6215 grade enhances wear resistance during turning. How does the 0.2 mm radius affect component finish? A 0.2 mm corner radius helps achieve improved surface quality while retaining edge strength; the geometry provides a compromise between fine finish and tool robustness. Which holder features must be checked for compatibility? Compatibility is defined by insert form, clearance angle (11°), tolerance class, clamping style, size (09) and thickness (3.97 mm); the insert seats into ISO‑standard rhombic holders with the appropriate pocket and screw. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 for high wear resistance combined with fracture toughness and the ISO CPMT 09T302 format for straightforward holder compatibility; order directly via Metav Werkzeuge or request specialist advice if required. CPMT09T302 T9215 CPMT 09T302 turning insert for turning (Tungaloy) — CVD-coated carbide, 0.2 mm radius A CPMT09T302 T9215 turning insert engineered for medium-steel external and internal turning, featuring a single-sided chipbreaker and a cylindrical hole with a 40°–60° countersink for secure clamping. CVD-coated carbide T9215 ISO CPMT 09T302 format Single-sided chipbreaker for medium steel Cylindrical hole with 40°–60° countersink Reliable wear resistance for productive medium-steel turning The CVD-coated carbide in grade T9215 combines high wear resistance with good fracture toughness, making this insert well suited to continuous and lightly interrupted cutting of medium steel. The coating reduces flank and crater wear under standard cutting conditions, which helps to maintain consistent component quality over longer tool life. Choosing this insert supports stable process windows in serial production, translating into fewer interruptions and improved overall throughput. Consistent fit and accurate edge geometry for quality surfaces Supplied in the ISO CPMT 09T302 format with a 0.2 mm corner radius and an 11° relief angle, the insert ensures predictable cutting behaviour and a fine surface finish on external and internal profiles. The rhombic shape and 3.97 mm thickness offer rigidity in the clamped position, while the cylindrical hole with a 40°–60° countersink provides secure fastening and easy indexation for fast changeovers. These characteristics simplify holder selection and reduce setup variation in workshop and production environments. Controlled chip formation and practical selection guidance The single-sided chipbreaker is optimised for medium steels and supports reliable chip control across typical feed ranges, lowering the risk of chip entanglement and improving tool-to-part interaction. For best results, combine the insert’s chipbreaker and T9215 grade with a holder matched to the CPMT geometry and the intended cutting parameters. The insert is suitable for both finishing and medium machining tasks; selection should consider workpiece stability and whether cuts are continuous or lightly interrupted to balance tool life and productivity. Technical documentation and advice are available for process integration and holder compatibility. Contact Metav Werkzeuge for application-specific recommendations on matching holders and feed/speed settings for this Tungaloy insert, or request further technical data from our consultants. Technical data Article number: 6951176 Manufacturer SKU: TUN6951176 SKU: 6951176-Tungaloy Name: CPMT09T302 T9215 Tungaloy turning insert Dimensions & core data Shape: rhombic Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 11° Insert angle: 80° Materials & features Material: carbide Coating: CVD-coated Grade: T9215 Chipbreaker: single-sided Hole: cylindrical hole with 40°–60° countersink Typical application: external and internal turning; medium steels Model series: ISO turning indexable inserts FAQ What materials is this insert best suited for? The CPMT09T302 T9215 turning insert is primarily intended for medium steel machining; the T9215 grade and CVD coating combine wear resistance and toughness for productive steel turning. Which holders are compatible with the CPMT09T302 format? Compatibility depends on the CPMT form, relief angle, tolerance class, fastening method, size and thickness; select a holder specified for ISO CPMT 09T302 to ensure correct seating and clamping. How does the 0.2 mm corner radius affect the machining result? A 0.2 mm corner radius delivers a finer edge for improved surface finish and reduced cutting forces in finishing and medium machining; larger radii would be chosen for stronger edge strength during heavy cuts. Is the insert suitable for interrupted cuts? This insert is designed for continuous to lightly interrupted cuts; the T9215 grade offers a balance of fracture resistance and wear life suitable for such conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 T9215 Wendeplatten - Tungaloy
Taking advantage of the CVD-coated carbide grade T9215 and the ISO-compliant geometry ensures high productivity in medium-steel turning while maintaining reliable tool life and fracture resistance; order details and procurement support are available via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. CPMT 09T302 T9215 turning insert by Tungaloy — CVD-coated carbide, rhombic ISO insert for turning CPMT09T302 T9215 is an ISO-standard rhombic turning insert designed for general external and internal turning of medium steels, combining a wear-resistant coating with geometry optimised for continuous to light interrupted cuts. CVD-coated carbide T9215 for steels ISO rhombic form with cylindrical hole 11° clearance angle for stable cutting 0.2 mm nose radius for fine finishes Productive cutting with a wear-resistant grade The T9215 cutting grade is a CVD-coated carbide specifically developed for medium steel machining where a balance of high wear resistance and fracture toughness is required. This combination reduces flank and crater wear under continuous or slightly interrupted cuts, allowing longer tool life and more predictable change intervals. The coating process forms a hard, adherent layer that improves abrasive wear resistance; in practical terms, this translates into fewer insert changes and a steadier production rhythm on the shop floor. Precise geometry for consistent assembly and accuracy Supplied as an ISO-standard rhombic insert with a cylindrical hole and a single-sided countersink (40°–60°), the geometry ensures repeatable seating in compatible holders. The 11° clearance reduces rubbing and surface heat, contributing to improved dimensional control and surface finish. Compatibility with a holder depends on the insert form, clearance angle, tolerance class, fastening method, nominal size and thickness; matching these parameters prevents clamping play and maintains concentricity during both external and internal turning operations. Fine finishing and controlled chip formation With a 0.2 mm nose radius and a plate thickness of 3.97 mm, the insert is suitable for fine finishing passes and stable roughing when machine and setup rigidity permit. The one-sided chipbreaker geometry promotes controlled chip flow for typical steel grades, helping to avoid long, tangled chips and improving process safety. For best outcomes, pair the insert with an appropriately rigid holder and select cutting data that reflects workpiece stability and the chosen grade’s capabilities. Practical application guidance and selection advice The insert is intended for turning operations and performs well in both external and internal applications on medium-strength steels under continuous to light interrupted cuts. Select the chipbreaker and grade according to the workpiece material and the machining mode: choose T9215 for parts where wear resistance and fracture safety are priorities. For uncertain fits or to optimise cutting parameters for specific components, seek application support to ensure holder compatibility and to avoid unnecessary tool wear or poor surface finish. Contact Metav Werkzeuge to confirm suitability for a particular turning task or to request availability of the Tungaloy CPMT09T302 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6773841 Manufacturer SKU: TUN6773841 Brand: Tungaloy Model series: ISO turning inserts Numbers / core technical data Thickness: 3.97 mm Nose radius: 0.2 mm Clearance angle: 11° Included angle: 80° Plate size: 09 Manufacturer article number: 6773841 Designs / special features Material: carbide Coating/grade: CVD-coated carbide, T9215 Plate form: rhombic Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Typical application: external and internal turning of medium steel Suitability: continuous to light interrupted cuts FAQ What materials is this insert best suited for? The CPMT09T302 T9215 insert is optimised for medium steels; the T9215 CVD-coated carbide balances wear resistance and fracture toughness for productive steel turning. How is the insert secured in the holder? This rhombic insert uses a cylindrical hole with a single-sided countersink (40°–60°) for centre clamping; compatibility depends on holder form, size, clearance and fastening method. Can this insert be used for internal turning? Yes, the ISO geometry and rhombic form make the insert suitable for both external and internal turning when paired with an appropriate holder. What surface finish can be expected with a 0.2 mm radius? A 0.2 mm nose radius typically yields fine finishes on steels when combined with correct feeds and a rigid setup; it is suitable for finishing passes and light semi-finishing. Is the insert suitable for interrupted cuts? The grade is designed for continuous to light interrupted cuts; for heavily interrupted machining, a different grade or a more robust geometry may be advisable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide for long tool life, a 0.2 mm corner radius for fine surface finish and ISO conformity for reliable holder interchangeability; order the insert directly via Metav Werkzeuge or consult our specialists for mounting guidance. CPMT09T302 T9215 — Indexable turning insert for turning (Tungaloy) The CPMT09T302 T9215 is an ISO-format indexable insert engineered for external and internal turning, optimised for medium-steel machining. CVD-coated carbide for high wear resistance Optimised for medium-steel turning Rhombic 09 form with 11° relief angle Single-sided chipbreaker for interrupted cuts Engineered for sustained productivity with consistent wear control The T9215 grade combines a CVD-coated carbide substrate with a formulation designed to balance wear resistance and fracture resistance, making it well suited to continuous and slightly interrupted cutting. The result is fewer tool changes and steadier cycle times in production environments. The insert’s grade supports productive machining of medium steels while maintaining edge stability, which in practice reduces unplanned downtime and contributes directly to improved shop-floor throughput. Clear compatibility and secure mounting for fast set-up Being an ISO-format indexable insert, the part adheres to standard indexing and clamping conventions: the rhombic 09 outline, the 11° relief angle and the specified thickness ensure predictable fit in compatible external holders and boring bars. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping and easy orientation. Such standardised geometry simplifies tool inventory and shortens set-up times, while the defined tolerances help maintain repeated positioning accuracy across jobs. Fine surface finish and adaptable chip control with minimal adjustment A 0.2 mm corner radius provides a balance between cutting robustness and surface quality, enabling finer finishes on external and internal profiles without excessive feed reductions. The single-sided chipbreaker is matched to permit reliable chip control on the intended materials; selecting the correct chipbreaker and grade for the workpiece, machining method and machine rigidity will yield the best outcome. The insert’s 3.97 mm thickness contributes to edge support, reducing vibration and improving dimensional stability during turning. Contact Metav Werkzeuge to obtain the CPMT09T302 T9215 from Tungaloy and receive tailored advice on holder compatibility and optimal cutting parameters Technical data Article number: 6951207 Manufacturer SKU: TUN6951207 SKU: 6951207-Tungaloy Insert designation: CPMT09T302 Facts Corner radius: 0.2 mm Thickness: 3.97 mm Relief angle: 11° Insert size: 09 Countersink angle: 40°–60° Included hole: with hole Special features Material: carbide Coating/grade: T9215 (CVD-coated) Insert shape: rhombic Chipbreaker: single-sided Typical use: external and internal turning of medium steel Compatible system: ISO indexable insert system; requires matching holder form, clearance angle and clamping FAQ What materials is this insert intended for? The CPMT09T302 T9215 is formulated for machining medium steel, offering a balance of wear resistance and toughness suitable for productive steel turning operations. Can the insert handle interrupted cuts? Yes, the T9215 grade is suitable for continuous to slightly interrupted cuts; the single-sided chipbreaker further supports chip control during light interruptions. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle (11°), tolerance class, clamping method, insert size (09) and thickness (3.97 mm); use holders designed for ISO-format rhombic inserts of the CPMT designation. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius improves edge strength while permitting finer surface finishes compared with larger radii, reducing the need for secondary finishing in many turning tasks. Is the insert suitable for internal as well as external turning? Yes, the insert’s form and thickness support both external and internal turning applications when paired with an appropriate boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, universally applicable carbide grade and precise ISO compatibility to maintain steady productivity in medium to heavy steel turning; order directly via Metav Werkzeuge or request advice from our technical consultants. CPMT 09T302 T9225 Turning Insert by Tungaloy — ISO rhombic insert for medium‑to‑heavy steel turning CPMT 09T302 T9225 is a rhombic ISO turning insert designed for reliable performance in external and internal turning operations; compatibility with holders depends on form, clearance angle, tolerance class, fastening, size and thickness. ISO rhombic insert CPMT 09T302, 80° geometry CVD-coated carbide grade T9225 for steel machining 11° clearance angle and 0.2 mm corner radius Central hole; single-sided chipbreaker; 3.97 mm thick Higher material removal rates with consistent tool life The CVD-coated carbide composition and the T9225 grade combine to offer a balance of wear resistance and toughness that is tailored for medium to heavy steel machining. This results in predictable performance under varying engagement conditions and intermittent cuts, enabling higher material removal rates without frequent insert changes. The combination of coating and substrate supports both sustained cutting and repeatable edge life, which reduces tool change downtime and contributes to a more economical production flow. Simple integration into existing ISO toolholder systems Thanks to the ISO designation and the rhombic form, the insert integrates readily into standard external holders and boring bars when matched by form, clearance angle and tolerance class. The central hole with a cylindrical bore and one‑side countersink (40°–60°) ensures secure clamping and straightforward orientation during assembly. These characteristics make setup predictable across different machines and holders and simplify stocking of spare inserts and accessories. Stable chip control and process security under fluctuating conditions The single-sided chipbreaker designed for this insert supports stable chip formation when machining steels with varying cutting conditions. The modest 0.2 mm corner radius provides a compromise between edge strength and surface finish, while the 3.97 mm thickness contributes to rigidity and vibration resistance. Together these features deliver process security: fewer unexpected interruptions, consistent surface quality and greater confidence when shifting from semi‑finish to roughing operations. Practical selection guidance and technical backing When selecting the insert grade and chipbreaker, match the T9225 universal grade to applications where toughness is needed—for slightly interrupted cuts or where engagement varies. For fine finishing or highly abrasive stainless grades, alternative sorts may be preferable. If there is any uncertainty about holder compatibility, recommended cutting parameters or optimal chipbreaker choice, Metav Werkzeuge provides technical guidance and sizing support to ensure the insert is used to best effect. Contact Metav Werkzeuge for personalised holder matching and cutting‑data recommendations for the Tungaloy CPMT 09T302 insert. Technical data Article number: 6780683 SKU: 6780683-Tungaloy Manufacturer SKU: TUN6780683 Model series: ISO turning inserts Label: CPMT09T302 T9225 Tungaloy-insert Core data Corner radius: 0.2 mm Clearance angle: 11° Thickness: 3.97 mm Insert size: 09 Geometry angle: 80° Special features Material: cemented carbide Coating/grade: T9225 (CVD-coated) Shape: rhombic Hole: with hole; cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning FAQ Is this insert suitable for interrupted cuts? The CPMT 09T302 in grade T9225 is formulated for robustness and improved toughness, making it suitable for slightly interrupted cuts and varying engagement conditions in steel turning. Which materials is this insert optimised for? This CVD-coated carbide insert is optimised for medium to heavy steel machining; the T9225 grade provides broad applicability across common steel alloys. What holders are compatible with this rhombic insert? Compatibility depends on holder form, free/clearance angle, tolerance class and thickness; the ISO rhombic form and central hole mean it fits standard ISO holders designated for CPMT inserts when those parameters match. Can the CPMT 09T302 be used for finishing operations? The 0.2 mm corner radius and T9225 grade favour semi-finishing to roughing; for high‑quality finishing, a finer radius or a grade optimised for finishing would be recommended. How should the chipbreaker choice be matched to the job? Select the chipbreaker and sort according to workpiece material, machining type and stability; the single-sided chipbreaker here supports stable chips on steel in semi‑to‑heavy cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 T9225 Wendeplatten - Tungaloy
Reliable machining results are achieved by combining the CVD-coated carbide T9225 with a rhombic 80° geometry and a single-sided chipbreaker; these features provide stable cutting, long tool life and suitability for interrupted cuts. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CPMT 09T302 T9225 Turning insert — Tungaloy CPMT09T302 T9225 is an ISO-standard rhombic turning insert designed for medium to heavy steel machining and interrupted cutting conditions CVD-coated carbide for robust performance Rhombic 80° geometry for versatile turning Single-sided chipbreaker for interrupted cuts Compatible with ISO turning toolholders Reliable performance from a robust coated grade The CPMT09T302 T9225 combines a CVD coating with a tough carbide substrate to deliver consistent performance under variable engagement conditions. The T9225 grade is engineered as a robust universal sort for medium to heavy steel machining, offering a balance of hardness and toughness that extends tool life where intermittent cuts or less rigid setups are encountered. The coating reduces friction and improves wear resistance, which in turn supports more stable cutting and predictable part quality. Geometry and clamping: what the shape and hole mean for the process The insert’s rhombic 80° geometry and 0.2 mm corner radius provide a versatile cutting angle suited to both finishing and semi-finishing passes, while the 11° relief angle helps reduce rubbing on the flank. The design includes a cylindrical hole with a single-sided countersink (40°–60°), enabling secure clamping in standard ISO toolholders and straightforward replacement. The single-sided chipbreaker is optimised for chip control during varying chip loads and for coping with partly interrupted cuts; this means fewer stoppages for chip clearing and more efficient cycle times for repetitive turning tasks. Process reliability, efficiency and application guidance Selection of the T9225 grade and the rhombic form is intended to improve process reliability through stable chip formation and predictable flank wear. For operations on medium to heavy steels, the combination of grade and geometry reduces the risk of sudden edge failure, which supports longer tool life and lower per-part costs. The insert is part of an ISO-series system, so compatibility with holders is determined by form, relief angle, tolerance class, fixing method, size and thickness; correct matching ensures secure seating and optimal cutting performance. For application-specific cutting data and holder recommendations, technical consultation is available to align insert choice with machine rigidity and workpiece material. Contact Metav Werkzeuge for tailored application advice on the Tungaloy CPMT09T302 T9225 insert and to discuss suitable holders and parameters; email info@metav-werkzeuge.com or call +49 2822 7131930 for assistance from our technical team Technical Data Article number: 6951177 SKU: 6951177-Tungaloy Manufacturer SKU: TUN6951177 Model series: ISO turning indexable inserts Designation: CPMT09T302 Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 80° Special features Material: carbide Coating: CVD Shape: rhombic Hole: with hole — cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning; suitable for medium to heavy steel machining and interrupted cuts ISO-standard insert; compatibility depends on holder form and tolerance FAQ What materials is this insert suitable for? The CPMT09T302 T9225 insert from Tungaloy is intended primarily for medium to heavy steel machining and performs well under slightly interrupted cutting conditions. How does the CVD coating help in turning applications? The CVD coating on the T9225 grade reduces friction and improves wear resistance, resulting in more stable cutting and longer insert life in demanding steel turning operations. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO dimensions; compatibility with a given holder depends on form, relief angle, tolerance class, fixing method, size and thickness, and the CPMT09T302 must be paired with a matching ISO turning holder. What is the purpose of the single-sided chipbreaker? The single-sided chipbreaker controls chip formation during varying chip loads and interrupted cuts, improving chip evacuation and reducing the risk of chip-related interruptions. Which SKU should be used when ordering or referencing this insert? Reference the SKU 6951177-Tungaloy or the manufacturer article number 6951177 when ordering or requesting technical data for this indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T302 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated T9225 grade and ISO-standard geometry for reliable medium to heavy steel turning; the robust carbide construction and 0.2 mm corner radius support stable chip control and repeatable tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility. CPMT 09T302 T9225 Turning insert — ISO CPMT indexable insert for turning by Tungaloy, CVD-coated carbide, 0.2 mm radius CPMT09T302 T9225 is an ISO-standard indexable insert for turning applications, designed for medium to heavy steel machining where variable engagement or slightly interrupted cuts demand additional toughness. CVD-coated T9225 grade for increased toughness ISO CPMT geometry, compatible with standard holders 0.2 mm corner radius for fine edge control Designed for medium to heavy steel turning Dependable performance for demanding steel turning The CVD-coated T9225 grade provides a balance of wear resistance and toughness tailored to medium and heavy steel machining. By combining a carbide substrate with a multi-layer CVD finish, the cutting edge resists abrasive wear while retaining sufficient edge strength for variable cutting conditions. This results in consistent tool life under mixed engagement and intermittent cutting, reducing unplanned insert changes and improving process stability. Easily integrates with ISO tooling systems for predictable setup The insert features the ISO CPMT geometry with a rhombic form, a 11° relief and 80° main angle; these dimensions ensure compatibility with a wide range of standard holders when form, relief angle, tolerance class, clamping method, size and thickness match. The 3.97 mm thickness and the presence of a hole with a cylindrical bore plus a single-side countersink (40°–60°) simplify clamping reliability, while the standard size designation supports straightforward procurement and inventory management. Precise edge control and optimised chip formation A 0.2 mm corner radius combined with a one-sided chipbreaker gives controlled cutting edge geometry for fine to moderate finishing passes and predictable chip flow in steel turning. The single-sided chipbreaker promotes stable chips under heavier feeds, lowering the risk of edge damage during short interruptions. Choosing the right chipbreaker and grade aligns surface finish targets with productivity goals, enabling a clearer trade-off between material removal rate and final surface quality. Application guidance and system considerations As a universal, robust grade, T9225 suits a wide range of steel turning tasks where varying engagement or light interruptions occur; the insert is intended to be used together with a matching external holder or boring bar, a proper backing/locating pad and replacement clamping screws. For best results, select tooling parameters that reflect the insert’s strength—moderate cutting speeds with appropriate feed and coolant strategy deliver the best mix of tool life and productivity. For compatibility checks, Metav Werkzeuge can advise on holder fit and clamping sets to ensure correct seat and tolerance match. Contact Metav Werkzeuge for tailored application advice on the Tungaloy CPMT 09T302 T9225 insert and assistance with holder selection and supply Technical data Article number: 6951209 SKU: 6951209-Tungaloy Manufacturer SKU: TUN6951209 Manufacturer: Tungaloy Facts Thickness: 3.97 mm Size: 09 Corner radius: 0.2 mm Relief angle: 11° Main angle: 80° Countersink angle: 40°–60° Special features Coating/type: CVD-coated carbide (T9225) Geometry: Rhombic (CPMT) Application: Turning (external and internal) Chipbreaker: One-sided Hole style: With hole — cylindrical bore + single-side countersink Typical use: Medium to heavy steel machining, intermittent cuts System components: Insert + matching outer holder or boring bar + backing pad/clamp and replacement screws FAQ What materials is this insert suited to machine? The CPMT09T302 Tungaloy indexable insert in T9225 is designed primarily for medium to heavy steel turning, offering toughness for variable engagement and slightly interrupted cuts. How does the T9225 grade improve performance compared with standard grades? The T9225 grade on the CPMT09T302 insert combines CVD surface hardness with a tougher substrate to provide better resistance to chipping under interrupted cuts and stable wear behaviour in heavier steel machining. Which holder features are required for secure clamping? Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; the CPMT09T302 insert requires a matching CPMT holder or boring bar, a backing/locating pad and appropriate screws for secure clamping. Can the insert handle interrupted cuts or roughing operations? Yes, the CVD-coated T9225 variant of the CPMT09T302 is intended for robust universal use and can withstand interrupted cuts and roughing in medium to heavy steel applications thanks to its enhanced toughness. What effect does the 0.2 mm corner radius have on surface finish and strength? The 0.2 mm corner radius provides a good compromise between edge strength and surface finish: it improves edge robustness for heavier engagement while enabling acceptable surface quality on finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T304 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade engineered for stainless steels, a compact 0.4 mm corner radius for accurate contouring, and ISO-conform compatibility for reliable clamping; order originals via Metav Werkzeuge or request application guidance from the consultants. CPMT 09T304 AH6225 turning insert — Tungaloy CPMT 09T304 AH6225 is an ISO-format rhombic turning insert designed for external and internal turning of stainless steels, offering a stable cutting edge and a single-sided chipbreaker for medium cutting conditions. PVD-coated carbide for stable cutting Universal AH6225 grade for stainless steels Rhombic ISO insert with 11° clearance 0.4 mm corner radius for precise contours Reliable performance for stainless steel turning The CPMT09T304 AH6225 insert is optimised as a universal solution for machining stainless steels, combining a PVD-coated surface with a wear-resistant carbide substrate. The coating reduces built-up edge and improves heat resistance under varying cutting conditions, while the substrate maintains a stable cutting edge during medium-depth cuts. This configuration supports consistent surface quality and repeatable component dimensions, making the insert suitable for shops aiming to balance productivity with predictable tool life. Compatibility and secure clamping for simple tool integration Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the insert features a cylindrical hole with a one-sided countersink and is supplied in the ISO CPMT format to match common clamping systems. The 11° clearance angle and the standardised plate geometry ensure that the component can be mounted with correct rake and clearance relationships, and the defined 3.97 mm thickness provides sufficient support in the pocket. These dimensions permit secure fastening and reduce the risk of chatter when the assembly is set up according to holder specifications. Geometry and coatings that increase process reliability The rhombic plate shape and a 0.4 mm radius deliver a compromise between edge strength and contour fidelity, allowing controlled chip flow with the single-sided chipbreaker for many turning operations. The AH6225 grade is tailored to provide a sharp yet robust edge for medium machining of stainless steels, supporting steady material removal rates under fluctuating conditions. Because the insert is ISO-standardised, replacement and inventory management are simplified, and consistent cutting performance can be expected when the insert is paired with suitable holders and cutting parameters. Contact Metav Werkzeuge for tailored application advice on the Tungaloy AH6225 grade and to secure original inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947677 Manufacturer SKU: TUN6947677 SKU: 6947677-Tungaloy Manufacturer: Tungaloy Material: Carbide Model series: ISO turning inserts Facts ISO designation: 09T304 Size: 09 Thickness: 3.97 mm Clearance angle: 11° Corner radius: 0.4 mm Angle: 80° Special features Grade/coating: AH6225, PVD-coated Plate form: rhombic Chipbreaker: single-sided Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning System build: ISO insert, matching outer holder or boring bar, shim/clamp set and spare screws FAQ What materials is this insert designed for? The insert is formulated for machining stainless steels; the AH6225 grade and PVD-coated carbide combination is optimised for medium cutting of corrosion-resistant alloys. Is the CPMT09T304 suitable for both external and internal turning? Yes; the ISO-format geometry and the single-sided chipbreaker allow use in both external and internal turning operations when the correct holder and setup are used. What is the corner radius and how does it affect machining? The corner radius is 0.4 mm; this radius balances edge strength and contour accuracy, enabling precise profiles while maintaining a robust cutting edge. How is compatibility with toolholders ensured? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the CPMT09T304 follows ISO dimensions to match common holders and fastening systems. What are the hole and countersink specifications? The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°), allowing standard screw clamping and positional indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T304 AH6225 Wendeplatten - Tungaloy
Benefit from a PVD‑coated carbide grade designed for rostfreier Stahl that delivers a sharp yet stable cutting edge and consistent performance in medium turning tasks; the precise ISO form and 80° geometry ensure reliable seating and repeatable results. Order the CPMT09T304 AH6225 Tungaloy insert directly via Metav Werkzeuge or request advice from our consultants. CPMT09T304 AH6225 indexable turning insert by Tungaloy — PVD‑coated carbide for stainless steel turning CPMT09T304 AH6225 is an ISO‑standard indexable insert optimised for turning applications, offering a balanced combination of edge sharpness and stability for medium machining of rostfreier Stahl PVD‑coated carbide for rostfreier Stahl ISO‑standard rhombic insert, 80° approach Sharp and stable cutting edge for medium cuts Cylindrical hole with countersink for secure clamping Consistent surface quality and reliable cutting performance The combination of a PVD‑coated substrate and the AH6225 grade results in a wear‑resistant cutting edge that maintains form under variable conditions. For machining rostfreier Stahl, a sharp yet stable edge reduces built‑up edge and improves surface finish, while the chosen carbide composition supports moderate cutting speeds without premature flank wear. This balance translates into fewer insert changes and predictable part quality, which is especially valuable in batch production and mixed‑material runs. Fast, repeatable tool set‑up thanks to ISO conformity Manufactured to ISO dimensions and a rhombic geometry, the insert guarantees compatibility with standard holders when form, clearance angle, tolerance class, fastening method, size and thickness match. The 80° approach angle and the 11° clearance are designed for stable seating and reliable chip flow. The insert’s cylindrical mounting hole with a single‑sided countersink (40°–60°) ensures secure clamping and accurate indexation, accelerating tool changes and reducing setup variability on the shop floor. Lower process risk and improved productivity The cutting grade and coating of this indexable plate support stable chip formation and good wear resistance under typical turning conditions. Selecting the appropriate single‑sided chipbreaker and grade for the workpiece material and machining stability minimises the risk of chatter and tool failure. As a result, machining cycles become more consistent, throughput increases and downstream finishing effort is often reduced, yielding a measurable productivity gain over time. Practical guidance for turning operations and system composition Suitable for both external and internal turning, the insert forms part of a system that includes a matching external holder or boring bar, a shim/clamping set and replacement screws. When replacing an insert, check that the holder geometry and tolerance class correspond to the ISO designation to preserve cutting angles and seat integrity. For operators less familiar with coating technologies: PVD (physical vapour deposition) applies a thin, hard layer that improves abrasive wear resistance while preserving edge sharpness—a practical advantage for machining rostfreier Stahl. For reliable mid‑range stainless steel turning with proven Tungaloy performance, contact Metav Werkzeuge for application advice or to arrange supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947684 Manufacturer SKU: TUN6947684 SKU: 6947684-Tungaloy Core data Insert designation: CPMT09T304 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Coating/type: PVD‑coated carbide (AH6225) Radius: 0.4 mm Thickness: 3.97 mm Approach angle: 80° Clearance angle: 11° Special features Shape: rhombic Size: 09 Mounting: with hole; cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Typical application: Drehen (external and internal turning) FAQ What materials is this insert optimised for? The CPMT09T304 AH6225 insert is optimised for rostfreier Stahl; the AH6225 grade and PVD coating make it suitable for a broad range of stainless‑steel turning tasks. How does the PVD coating benefit machining performance? A PVD‑coated carbide insert like this offers improved abrasive wear resistance while maintaining a sharp edge, which helps sustain surface finish and tool life during medium turning operations. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the ISO designation ensures broad compatibility with standard external holders and boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 09T304 AH6225 Wendeplatten - Tungaloy
Maximising process reliability and consistent edge life: the combination of the AH6225 PVD-coated carbide grade and a precise 0.4 mm corner radius delivers stable, repeatable turning of stainless steels; order the CPMT09T304 insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. CPMT09T304 AH6225 Tungaloy insert — ISO rhombic turning insert for stainless steels A CPMT09T304 indexable insert designed for external and internal turning, offering a balanced cutting edge for medium-duty machining of stainless steels PVD-coated carbide AH6225 for stainless steels ISO rhombic insert with 80° cutting edge 0.4 mm corner radius for consistent finishes Cylindrical hole with single-side countersink 11° clearance angle, 3.97 mm plate thickness Stable cutting performance for stainless steels The PVD-coated AH6225 grade provides a reliable mix of edge sharpness and wear resistance optimised for stainless steels in variable production environments. By combining a hard, wear-resistant coating with a tough carbide substrate, the insert sustains a stable cutting edge under interrupted cuts and fluctuating feeds, which helps to maintain surface quality and reduce rework. The result is a measurable improvement in process stability during medium-range turning operations. Geometry engineered for precise surfaces and tool life A 0.4 mm corner radius and an 80° cutting edge geometry support predictable load distribution and fine finishing capability. The 11° clearance angle reduces flank contact while preserving edge strength, making the insert suitable for operations that require consistent dimensional control. With a plate thickness of 3.97 mm, the indexable part offers sufficient rigidity in the clamping zone to resist chatter and provide repeatable tool life across batches. Integrated chip control and mounting details for productive turning The single-sided chipbreaker and the cylindrical hole with one-sided countersink (40°–60°) aid reliable chip evacuation and secure clamping in compatible holders. Good chip control shortens cycle interruptions and lowers the risk of surface blemishes, especially when machining long, springy stainless bars. The ISO-format design ensures compatibility with a wide range of standard external holders and boring bars when the correct form, relief, tolerance class, attachment method, size and thickness are matched. Application guidance and selection criteria As an ISO indexable insert, the component is intended for both external and internal turning; the correct selection of chipbreaker and grade depends on workpiece material, machining strategy and machine/tool stability. The ISO designation and rhombic form make it straightforward to compare sizes and fit holders, while the PVD layer and carbide core warrant long tool life under typical mixed-duty cycles. For changed conditions, choose a chipbreaker and cutting data aligned to feed, depth of cut and coolant strategy to maximise productivity. Contact Metav Werkzeuge for tailored recommendations on using Tungaloy turning inserts and for availability: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 6947682 Manufacturer SKU: TUN6947682 SKU: 6947682-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.4 mm Cutting edge angle: 80° Clearance angle: 11° Plate thickness: 3.97 mm Plate size: 09 Special features Carbide substrate with PVD coating (AH6225) ISO rhombic plate form (CPMT) Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Intended application: turning (external and internal) Compatibility depends on form, relief, tolerance, attachment, size and thickness FAQ Is this insert suitable for continuous stainless steel turning? The CPMT09T304 AH6225 insert is formulated for stainless steels and performs well in continuous medium-duty turning when cutting data and holder rigidity are matched to the application. What does the AH6225 grade offer compared with other grades? AH6225 is a PVD-coated carbide grade that balances sharpness and durability for stainless steels, providing stable edge life under mixed cutting conditions. Can the insert be used for internal boring as well as external turning? Yes, the ISO rhombic form and the specified geometry allow use in both external and internal turning operations, provided the correct holder and clamping arrangement are selected. How does the single-sided chipbreaker affect machining? The single-sided chipbreaker improves chip control for typical turning tasks and helps reduce re-cutting of chips, leading to more consistent surface quality and fewer cycle interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T304 AH725 Wendeplatten - Tungaloy
Take advantage of a robust PVD-coated carbide grade (AH725) and an ISO‑standard rhombic geometry to secure consistent, high‑quality turning results; the combination of process reliability and versatile edge protection reduces rework and downtime. Order the insert directly via Metav Werkzeuge or request further advice from the technical team. CPMT 09T304 AH725 — Indexable turning insert for turning by Tungaloy CPMT 09T304 AH725 is an ISO‑standard rhombic insert designed for external and internal turning in general workshop and production environments. ISO‑standard geometry, rhombic shape PVD‑coated cemented carbide AH725 Single‑sided chipbreaker for controlled chips 11° clearance angle, compatible with ISO holders Reliable performance for mixed‑material turning The PVD‑coated cemented carbide grade AH725 delivers a balance between toughness and wear resistance, making the insert suitable for machining both medium steel and stainless steels in variable production runs. The PVD layer improves surface hardness and reduces flank wear, which translates into longer tool life and fewer indexings. Compared with uncoated grades, this coating offers improved resistance to built‑up edge and thermal softening, helping to maintain dimensional stability during continuous turning operations. Precision geometry that enhances process security With an 80° main angle and a rhombic form, the insert provides a stable cutting edge for general turning tasks while offering good access for finishing passes. The 0.4 mm corner radius supports a compromise between edge strength and surface finish; a larger radius improves durability, while this moderate radius still permits fine surface quality. The 11° clearance angle reduces rubbing on the flank and helps sustain consistent cutting forces, which is particularly important when working with shorter, less rigid setups. This geometry contributes directly to predictable tool behaviour and fewer scrapped parts. Controlled chip formation and mounting reliability The one‑sided chipbreaker design supports effective chip control for common turning feeds and depths, reducing the risk of chip entanglement and promoting safer machine handling. The insert is supplied with a central hole featuring a cylindrical bore and a single‑sided countersink (40°–60°), ensuring secure clamping in compatible ISO indexable holders or turning bars. Correct clamping, determined by form, clearance angle, tolerance class, fixing method, size and thickness, is essential for achieving the process reliability expected from production tooling. Practical selection and versatility in everyday production As part of an ISO turning insert series, compatibility is straightforward when matching holders and underlay kits by ISO specifications. The universal, fracture‑resistant nature of this grade makes the insert a practical choice where batches include a variety of steels or when smaller tool sizes are required. Choosing a grade like AH725 reduces the need for frequent grade changes, supporting quicker setup times and a more economical production flow while maintaining consistent surface quality. For ordering, technical matching or batch recommendations, please contact Metav Werkzeuge for personalised guidance and rapid supply. Technical Data Article number: 6863526 Manufacturer SKU: TUN6863526 SKU: 6863526-Tungaloy Manufacturer: Tungaloy Numbers / Core technical data Insert designation: CPMT09T304 Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 11° Main angle: 80° Hole: with hole (cylindrical + one‑sided countersink 40°–60°) Special features / Versions Material: cemented carbide Coating / grade: PVD‑coated AH725 Chipbreaker: one‑sided Plate shape: rhombic Series: ISO turning indexable inserts Typical application: Turning (external and internal) FAQ What materials is this insert designed for? The CPMT 09T304 AH725 insert is designed primarily for steel and stainless steels; the AH725 grade provides a universal, fracture‑resistant performance across these materials. How is the insert clamped in the holder? Clamping is achieved via the central hole (cylindrical with a single‑sided countersink) and the insert form; correct holder selection according to ISO dimensions ensures secure fixation and repeatable positioning for the CPMT 09T304 AH725 insert. Can this insert be used for finishing and roughing operations? The geometry and 0.4 mm corner radius favour general turning and finishing passes; while the grade is robust enough for light roughing, heavier stock removal may require a different geometry or a larger radius to optimise edge life. What advantage does the PVD coating provide? The PVD coating on the AH725 grade increases surface hardness and reduces flank wear and built‑up edge, which supports longer tool life and consistent surface quality during continuous turning operations. Is this insert compatible with all ISO turning holders? Compatibility depends on matching the insert form, free angle, tolerance class, fixing method, size and thickness to the holder; the CPMT 09T304 follows ISO standards, so selection of a matching ISO holder or turning bar is recommended. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CPMT 09T304 AH725 Wendeplatten - Tungaloy
With a focus on stable chip formation and broad material coverage, the PVD-coated AH725 grade ensures reliable process security and consistent edge life, while the 0.4 mm corner radius and ISO rhombic form deliver repeatable chamfer and profile control in turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for compatibility checks. CPMT09T304 AH725 Tungaloy turning insert — PVD carbide, rhombic ISO insert for turning CPMT09T304 AH725 Tungaloy turning insert is an ISO‑standard rhombic insert designed for external and internal turning, offering a robust, universal cutting grade suited to mixed‑material production environments. ISO-standard rhombic insert, 80° geometry PVD-coated AH725 for process security 0.4 mm corner radius for consistent chamfers Compatible with cylindrical-hole holders High process reliability from a universal PVD grade The PVD-coated AH725 grade has been developed for productive turning across a wide range of Stahl and rostfreier Stahl components. Its combination of fracture-resistant substrate and PVD finish provides stable chip formation and extended edge life, which reduces unexpected tool changes and downtime. The rhombic geometry with an 80° included angle gives robust cutting edges that are particularly effective where interrupted cuts or variable engagement occur, supporting consistent machining results on smaller toolholders and compact setups. Geometry and mounting that simplify holder selection The insert's rhombic shape (CPMT form) and the specified 11° clearance angle match common ISO holders; mounting compatibility is determined by form, clearance, tolerance class, fastening and plate thickness. The with‑hole design (cylindrical hole plus one‑sided countersink, 40°–60°) ensures secure clamping in conventional clamping sets and reduces the risk of play during heavy cuts. Where holder choice is uncertain, a check of form and thickness against the holder specification is recommended to confirm correct fit and clamping stability. Controlled cutting performance and chip control A one-sided chipbreaker is integrated to promote predictable chip formation under typical turning feeds, improving evacuation and surface quality. The 0.4 mm corner radius supports consistent corner strength and is suitable for chamfering and finishing passes where edge robustness is required. In combination with the AH725 coating, the insert enables a balance of surface finish and productivity, particularly in workshops needing flexible tooling for frequent material changes. Application overview and practical benefits Designed for both external and internal turning, this indexable insert is a practical choice for operations demanding high process security and repeatable results. The carbide substrate delivers wear resistance, while the PVD layer improves thermal stability at elevated cutting speeds. For production setups that require adaptability across Stahl and rostfreier Stahl, the insert supports longer tool-life cycles and fewer interruptions, translating into measurable gains in machining throughput and consistency. For availability, compatibility advice and ordering of Tungaloy AH725 inserts, please contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for expert guidance and immediate stock information Technical data Article number: 6864984 Manufacturer SKU: TUN6864984 Label: CPMT09T304 AH725 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 80° Hole: with hole (cylindrical + one-sided countersink 40°–60°) Special features Material: carbide, PVD-coated AH725 Rhombic insert form (CPMT) One-sided chipbreaker ISO-standardised insert for turning Compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ Which materials are best suited to this insert? The CPMT09T304 AH725 Tungaloy turning insert is optimised for machining Stahl and rostfreier Stahl, offering a versatile solution where mixed batches or material changes are common. What does the AH725 grade provide in practice? AH725 denotes a PVD-coated carbide grade that combines fracture resistance with thermal stability, giving the insert dependable edge life and process security in a variety of turning applications. How is holder compatibility determined for this ISO insert? Compatibility is governed by the insert form, clearance angle, tolerance class, clamping method, size and thickness; checking these parameters against the holder specification ensures correct fit for the CPMT09T304 insert. For which turning operations is the insert suitable? This indexable insert supports both external and internal turning tasks, providing a reliable option for finishing and medium roughing where a balanced edge geometry is required. How does the chipbreaker influence machining? The one-sided chipbreaker on the CPMT09T304 insert promotes controlled chips and better evacuation, which helps maintain surface quality and reduces the risk of chip-related interruptions during production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of consistent process security, universal cutting performance and precise geometry for reliable turning results. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific selection and mounting advice. CPMT09T304 AH725 Tungaloy indexable turning insert — PVD-coated carbide, 0.4 mm nose radius The CPMT09T304 AH725 Tungaloy indexable insert is designed for ISO-standard turning applications, offering a universal, fracture-resistant grade for a range of steels and stainless steels ISO rhombic insert CPMT09T304, rhombic 09 PVD-coated carbide AH725 for steels 0.4 mm nose radius for fine finishing Cylindrical hole with 40°–60° countersink Stable machining with a universal PVD-coated grade The CPMT09T304 AH725 insert features a PVD-coated carbide substrate in the AH725 grade, developed for dependable performance across varying workpiece materials. This universal grade AH725 combines fracture resistance with consistent edge stability, resulting in stable chip control and reduced risk of unexpected insert failure. For workshops handling mixed batches of alloyed and non-alloyed steels, the grade’s adaptability supports dependable cycle times and lower process variability. Precision geometry for consistent surface quality A small 0.4 mm nose radius and the 11° clearance angle yield a balanced compromise between strength and finish capability. The rhombic geometry with an 80° approach gives a predictable cutting angle for turning operations, allowing for accurate dimensional control and repeatable part surfaces. These geometric attributes reduce the need for corrective rework and help maintain tolerances on turned components, particularly in finishing passes and where tight surface requirements apply. System compatibility and secure clamping for production As an ISO-standard insert, compatibility depends on form, clearance angle, tolerance class, attachment, size and thickness; the CPMT09T304 matches common holders when these parameters align. The insert is supplied with a cylindrical hole plus a single-side countersink (40°–60°) and a plate thickness of 3.97 mm, ensuring secure seating and torque transmission in standard clamping systems. Such features simplify tool changeovers and reduce the risk of misalignment during high-speed or interrupted cutting. Application focus and economic benefit Intended primarily for external and internal turning, this indexable insert works best when the chipbreaker and grade are matched to the material, operation and machine stability. The AH725 grade’s resistance to chipping and broad material suitability makes it a pragmatic choice for job shops and production lines that prioritise uptime and consistent output. By combining a robust grade with precise geometry, the insert contributes to fewer tool changes and improved machine utilisation, supporting cost-efficient production over time. Contact Metav Werkzeuge today for tailored advice on Tungaloy turning inserts and secure the right CPMT09T304 option for the application — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864868 Manufacturer SKU: TUN6864868 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Nose radius: 0.4 mm Plate size: 09 Plate thickness: 3.97 mm Clearance angle: 11° Approach angle: 80° Special features Coating: PVD Grade: AH725 Plate form: Rhombic Hole: with hole (cylindrical hole + one-sided countersink 40°–60°) Chipbreaker: single-sided Application: Turning FAQ What materials is the insert suited for? The CPMT09T304 AH725 insert is specified for machining a wide range of steels and stainless steels; the AH725 grade is designed for universal, fracture-resistant performance. Which operations are recommended for this insert? The insert is intended for external and internal turning; select the chipbreaker and stable tooling arrangement to match the specific cutting conditions. How does the cylindrical hole affect clamping? The cylindrical hole with a 40°–60° countersink supports secure seating in compatible holders and improves repeatability during indexable insert changes. Is the CPMT09T304 compatible with standard ISO holders? Compatibility is determined by form, clearance angle, tolerance class, attachment, size and thickness; the CPMT09T304 follows ISO norms and fits holders that match these parameters. What benefits does the AH725 grade provide? AH725 is a PVD-coated, fracture-resistant grade that offers broad material coverage and reliable edge stability for applications with varying workpieces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T304 AH8005 Wendeplatten - Tungaloy
High wear resistance, a PVD-coated cemented carbide grade AH8005 and a 0.4 mm corner radius provide consistent cutting performance and stable chip control in demanding turning operations. Order the insert directly via Metav Werkzeuge or consult the advisors for holder compatibility and clamping recommendations. CPMT09T304 AH8005 – ISO turning insert, PVD-coated, by Tungaloy CPMT09T304 AH8005 is an ISO rhombic turning insert designed for stable machining of heat‑resistant alloys and hard materials. PVD-coated grade AH8005 One-sided chipbreaker design ISO rhombic insert CPMT09T304 For heat-resistant alloys and hard materials Consistent cutting performance for demanding turning tasks The rhombic ISO insert delivers reliable results when machining difficult-to-cut materials. The combination of cemented carbide substrate and PVD coating increases wear resistance and reduces flank wear, which helps maintain dimensional stability over longer tool life. This performance advantage supports higher process reliability and fewer tool changes, improving overall productivity in series production or small-batch industrial turning. Coating and grade engineered for temperature resistance The AH8005 grade is a PVD-coated carbide developed for hot-section alloys and hardened components. The thin, hard coating provides enhanced surface hardness and thermal resistance, while the carbide core supplies toughness under interrupted cuts. For operators seeking repeatable surface finish and edge integrity, the coating–substrate pairing minimises built-up edge and extends effective cutting time on stable setups. Geometry and fixing designed for secure setup and chip control With a corner radius 0.4 mm and plate thickness 3.97 mm, the insert offers a balance between edge strength and form accuracy. The one-sided chipbreaker guides swarf for controlled evacuation in longitudinal and face turning. The insert features a cylindrical hole with single-side countersink (40°–60°) for standard clamping systems; compatibility with a given holder depends on insert form, clearance angle and tolerance class, so matching size and fastening type is essential for secure seating and repeatable results. Application advice and process benefits Intended for turning operations, the insert excels in stable machining conditions where tool life and surface quality are priorities. The geometry and grade combination reduce downtime and support predictable tool change intervals, which contributes to lower unit costs over production runs. If unsure whether this insert suits a specific component or holder, Metav Werkzeuge provides technical guidance and can advise on optimal chipbreaker and grade selection for the machining strategy. Contact Metav Werkzeuge for compatibility checks, clamping recommendations and to order CPMT09T304 AH8005 inserts directly; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 6775784 Manufacturer SKU: TUN6775784 Model series: ISO-Drehwendeschneidplatten Dimensions / core technical data Thickness: 3.97 mm Corner radius: 0.4 mm Free angle: 11° Included angle: 80° Insert size: 09 Special features Material: cemented carbide Grade / coating: AH8005, PVD-coated Plate shape: rhombic Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Application: turning Compatibility: determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CPMT09T304 AH8005 insert is intended for heat‑resistant alloys and hard materials, offering wear resistance and thermal stability for such applications. What are the insert's key dimensions and why do they matter? The insert has a 0.4 mm corner radius and a thickness of 3.97 mm; these dimensions influence edge strength, achievable surface finish and the selection of cutting parameters. How is the insert secured in the holder? Fixing uses the central hole with a cylindrical bore and a single-side countersink (40°–60°); correct holder choice and clamping torque ensure repeatable seating and stable cutting. Does the AH8005 grade support high cutting speeds? AH8005 with a PVD coating is optimised for thermal resistance and wear control, allowing competitive cutting speeds in stable setups when matched with appropriate cooling and feeds Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T304 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of robust PVD-coated carbide, reliable edge stability and ISO conformity for consistent turning performance; the balanced wear resistance of the AH8015 grade supports longer runs and predictable tool life. Order the CPMT 09T304 AH8015 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. CPMT 09T304 AH8015 indexable insert for turning by Tungaloy CPMT 09T304 AH8015 is an ISO-standard indexable insert designed for external and internal turning, optimised for machining heat‑resistant alloys and general turning tasks. CPMT 09T304 AH8015 PVD-coated carbide insert Rhombic 09 form, 80° cutting edge angle 0.4 mm corner radius for precision finishing Cylindrical hole with 40°–60° single-sided countersink Consistent productivity through balanced wear resistance The indexable insert delivers consistent cutting performance thanks to its ISO-standard geometry and a grade tuned for demanding materials. The PVD-coated carbide substrate of the AH8015 sort provides a balance between wear resistance and edge stability, which reduces frequency of tool changes and supports uninterrupted production. For industrial turning applications, this translates into predictable cycle times and lower overall machining costs when paired with appropriate process parameters. Geometry engineered for secure clamping and accurate results The rhombic 09 form with an 80° cutting edge angle and 11° clearance ensures broad compatibility with ISO holders while offering a stable cutting line for both external and internal turning. The 0.4 mm corner radius is tailored for fine finishing where dimensional accuracy and surface quality matter; the insert’s cylindrical hole with a single‑sided countersink (40°–60°) provides reliable clamping and repeatable seating in the pocket. These design features simplify tool selection and contribute to reproducible part quality. Grade and coating designed for heat‑resistant alloys and general use The AH8015 grade is a PVD-coated solution developed as a first choice for machining heat‑resistant alloys, delivering a practical mix of edge toughness and abrasion resistance. The coating improves thermal stability at the cutting edge and aids in chip control when combined with a suitable single‑sided chipbreaker. For shops that face a wide material mix, this insert offers versatility: choose the matching chipbreaker and cutting parameters to exploit the AH8015 behaviour for longer tool life and consistent surface finish. For tailored application advice, availability checks or to secure stock of the CPMT 09T304 AH8015 Tungaloy indexable inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for fast technical consultation and order processing Technical data Article number: 6825751 Manufacturer SKU: TUN6825751 SKU: 6825751-Tungaloy Model series: ISO turning indexable inserts Numbers / Core data Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 11° Cutting edge angle: 80° Hole style: with hole — cylindrical hole + single-sided countersink (40°–60°) Design & special features Material: carbide Coating / Grade: AH8015 (PVD-coated) Shape: rhombic Chipbreaker: single-sided Application: turning (external and internal) Compatibility: holder compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The CPMT 09T304 AH8015 Tungaloy indexable insert is primarily specified for heat‑resistant alloys and general-purpose turning; the AH8015 grade balances wear resistance and edge stability for such applications. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO-standard geometry; compatibility with a specific holder depends on form, clearance, tolerance class, fastening method, size and thickness and should be verified against the holder specifications. How does the 0.4 mm corner radius affect the finished part? A 0.4 mm corner radius helps achieve improved surface finish and dimensional control in finishing passes; it reduces peak cutting forces compared with larger radii while maintaining edge strength. What advantages does the PVD coating provide? The PVD-coated AH8015 layer increases thermal resistance at the cutting edge, enhances abrasion resistance and contributes to consistent tool life during continuous turning operations. Can this insert be used for internal turning? Yes, the insert’s rhombic form and 80° cutting edge angle make it suitable for both external and internal turning when mounted in an appropriate ISO‑compliant holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T304 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8015 carbide and ISO-conform geometry for consistent performance when machining heat‑resistant alloys; the 80° rhombic form and 0.4 mm nose radius ensure reliable edge life and repeatable results. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult the Metav team for application advice. CPMT 09T304 AH8015 ISO turning insert — PVD-coated carbide by Tungaloy, 80° rhombic The CPMT09T304 AH8015 is an ISO rhombic turning insert designed for external and internal turning of heat‑resistant alloys, combining wear resistance with edge stability for general machining. ISO rhombic insert CPMT 09T304 AH8015 PVD-coated carbide for heat-resistant alloys 80° geometry with 0.4 mm nose radius Cylindrical hole with 40°–60° countersink Consistent cutting performance for hard-to-machine alloys The PVD‑coated AH8015 grade is developed as a balanced choice between wear resistance and cutting‑edge stability, making it suitable for routine machining of heat‑resistant alloys. The PVD coating reduces adhesive wear and improves hot hardness, which extends tool life under elevated cutting temperatures. For production environments seeking steady cycle times and reduced insert changes, this grade offers an economical compromise between life and edge strength while maintaining surface finish quality. Geometry and clamping for repeatable turning results The rhombic 80° geometry with a 0.4 mm nose radius and 11° relief angle provides a reliable cutting profile for both finishing and light roughing passes. The plate thickness of 3.97 mm contributes to rigidity and heat absorption, while the cylindrical hole with a one‑sided countersink (40°–60°) ensures secure clamping in ISO‑standard holders. The single‑sided chipbreaker is designed for controlled chip formation when paired with the correct feed and stability, resulting in stable forces, fewer vibrations and improved part tolerances. System compatibility and process advantages in turning As an ISO‑standard insert, the plate integrates into common holder systems together with shims and clamping sets to form a complete tool assembly. The balanced properties of the grade and the single‑sided chip control favour process reliability in batch production and jobbing work alike. Selection of the correct chipbreaker and insert geometry according to workpiece material and machine stability will reduce downtime and increase throughput. For complex applications, technical advisors can recommend holder combinations and cutting data tailored to the component and machine dynamics. Contact Metav Werkzeuge for tailored recommendations on Tungaloy CPMT 09T304 AH8015 inserts and to arrange prompt delivery or application consulting; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6825785 SKU: 6825785-Tungaloy Manufacturer SKU: TUN6825785 Model series: ISO-Drehwendeschneidplatten Name: CPMT09T304 AH8015 Tungaloy insert Material: Hartmetall Dimensions & measurable data Geometry angle: 80° Corner radius: 0.4 mm Relief angle: 11° Plate thickness: 3.97 mm Size designation: 09 Hole: with hole Countersink angle: 40°–60° Features & applications PVD-coated carbide AH8015 Single-sided chipbreaker Rhombic plate form Designed for turning (external and internal) Suited to heat-resistant alloys ISO-standardised insert System: insert + holder + shim + clamping set FAQ What materials is this insert suitable for? The CPMT09T304 AH8015 insert is formulated for machining heat‑resistant alloys; the PVD‑coated carbide grade provides improved wear resistance under high temperatures. Which holder types are compatible with this ISO insert? Compatibility is governed by ISO holder form, free angle, tolerance class, attachment method, size and thickness; the insert fits ISO‑standard rhombic holders designed for 09‑size plates. How does the AH8015 grade compare in edge stability and wear? AH8015 offers a balanced combination of wear resistance and edge stability, making it a practical first choice for general machining of heat‑resistant materials where both life and robustness are required. Is the insert clamped securely despite the countersunk hole? Yes; the cylindrical hole with one‑sided countersink (40°–60°) provides a reliable seating and secure clamping when used with the correct screw and clamping set. Can the same insert be used for both external and internal turning? The geometry and chipbreaker of this rhombic insert allow it to be used for both external and internal turning applications, provided the holder and machining parameters are appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CPMT 09T304 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced combination of PVD-coated AH8015 carbide, ISO conformity and a 0.4 mm corner radius for stable turning of heat-resistant alloys; the insert’s defined geometry and single-sided chipbreaker support consistent chip control and predictable tool life. Order the insert directly via Metav Werkzeuge or consult the technical team for compatibility and optimisation. CPMT 09T304 AH8015 indexable insert for turning — PVD-coated carbide, Tungaloy CPMT 09T304 AH8015 is an ISO-standard rhombic indexable insert intended for external and internal turning of heat-resistant alloys and general turning applications. ISO rhombic insert CPMT 09T304 PVD-coated AH8015 carbide grade 0.4 mm corner radius for precision Single-sided chipbreaker for reliable chips Higher productivity on heat-resistant alloys The AH8015 grade combines a PVD coating with a wear-resistant carbide substrate to deliver an effective balance between edge stability and abrasion resistance when machining heat-resistant alloys. This results in longer tool life under intermittent heat exposure and fewer insert changes, which raises productive uptime. The controlled coating structure also improves consistency across batches, so process parameters remain stable over longer series runs. Predictable fit and straightforward integration ISO standardisation ensures the insert’s form, clearance and tolerance classes align with common holders and boring bars, making fixture selection and setup straightforward. The rhombic shape with an 80° approach angle and defined 11° clearance reduces the need for extensive trial cuts. As compatibility depends on form, relief angle, size and thickness, the standardised geometry supports fast changeovers and predictable cutting behaviour on established toolholders. Geometry tuned for chip control and surface finish A 0.4 mm corner radius and a single-sided chipbreaker deliver a compromise between edge strength and surface finish: the modest radius enhances finishing capability while the chipbreaker steers chips away from the cutting zone for safer swarf handling. The insert thickness (3.97 mm) contributes to mechanical rigidity, reducing vibration and supporting consistent surface quality in through-feed and interrupted cuts. Application-oriented material performance Designed primarily for turning, the insert’s PVD-coated carbide composition makes it a first choice for general-purpose turning of heat-resistant alloys while maintaining versatility across a range of steels and alloys. The single-sided chipbreaker and the option of secure clamping via the central hole with a cylindrical bore and single-sided countersink (40°–60°) ensure stable seating and repeatable performance in both external and internal operations. Ask Metav Werkzeuge for availability of the Tungaloy CPMT 09T304 AH8015 insert and request tailored recommendations for holder compatibility and cutting parameters Technical data Article number: 6775785 Manufacturer SKU: TUN6775785 SKU: 6775785-Tungaloy Manufacturer: Tungaloy ISO designation: CPMT09T304 Model series: ISO turning indexable inserts Facts Insert size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 11° Approach angle: 80° Hole: with hole Design / Special features Grade: AH8015 (PVD-coated carbide) Chipbreaker: single-sided Hole style: cylindrical hole + single-sided countersink 40°–60° Shape: rhombic Application: turning (external and internal) FAQ What materials is the CPMT 09T304 AH8015 insert suitable for? The CPMT 09T304 AH8015 insert is formulated for turning heat-resistant alloys and performs well in a wide range of steels and alloys due to its balanced PVD-coated carbide grade. How does the AH8015 grade affect tool life and surface quality? AH8015 provides a compromise between wear resistance and edge stability, extending tool life under elevated temperatures while supporting consistent surface finish during finishing passes. Is special clamping required for this insert given the countersink design? No special method is required; the insert uses a central cylindrical hole with a single-sided countersink (40°–60°) for secure, repeatable clamping in compatible ISO holders. Can the insert be used for both external and internal turning? Yes, the geometry and chip control features of this insert make it suitable for both external and internal turning operations, provided the holder matches the ISO form and size. What is the advantage of the 0.4 mm corner radius? A 0.4 mm corner radius strengthens the cutting edge for improved durability while still allowing for good surface quality in semi-finishing and finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com