DNMG 150412 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade engineered for tough conditions, ISO-conformant 55° rhombic geometry and a 1.2 mm corner radius that gives stable entry and consistent tool life; order the insert directly via Metav Werkzeuge or request technical advice from their specialists. DNMG150412 T9225 turning insert — Tungaloy, 55° rhombic, CVD-coated carbide A DNMG150412 T9225 indexable insert engineered for robust external and internal turning, suited to medium to heavy steel machining where intermittent cuts demand extra toughness. ISO rhombic insert DNMG150412, 55° geometry CVD-coated carbide grade T9225 for steels Double-sided chipbreaker, cylindrical hole 1.2 mm corner radius for robust entry Consistent productivity in medium to heavy turning The DNMG-style indexable insert delivers predictable material removal rates and reduced setup changes thanks to its ISO form and 55° geometry. The combination of a stable rhombic shape and a 1.2 mm corner radius supports heavier engagement and shock resistance during interrupted cuts, which translates into fewer insert changes and more uptime on the shop floor. For production-oriented turning, the result is higher process stability and a lower cost per component when matched to an appropriate holder and machining parameters. Extended tool life through coating and substrate design The CVD-coated carbide substrate specified as grade T9225 is selected for a balance of toughness and wear resistance, making it suitable for varying cut conditions in steel. The CVD layer improves abrasion resistance; as a consequence, flank wear develops more slowly under continuous cutting and short interruptions alike. The insert’s double-sided chipbreaker assists in chip control and consistent surface finish, while the cylindrical hole and reliable clamping ensure repeatable seating and minimal runout during index changes. System compatibility and practical handling for workshops Designed as an ISO-standard turning insert, the plate’s fit to a holder depends on shape, relief angle, tolerance class, fastening and thickness; the plate thickness is 4.76 mm and the nominal size is 15. The insert is double-sided for economical indexing and features a cylindrical hole for secure mounting. With a relief angle of 0° and the rhombic form, the insert suits both external and internal turning operations when combined with a compatible toolholder and correct clamp set. Selection of the chipbreaker and grade should follow the workpiece material and machine stability to take full advantage of the insert’s performance. Contact Metav Werkzeuge for tailored selection and ordering of original Tungaloy DNMG150412 T9225 turning inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6780964 Manufacturer SKU: TUN6780964 Model series: ISO turning indexable inserts Facts Geometry angle: 55° Corner radius: 1.2 mm Thickness: 4.76 mm Size: 15 Special features CVD-coated carbide (grade T9225) Rhombic 55° plate form Double-sided chipbreaker Cylindrical hole for secure mounting ISO designation DNMG150412 Application: external and internal turning FAQ What holder compatibility should be checked for this insert? Compatibility is determined by insert form and dimensions; the DNMG150412 T9225 turning insert requires a matching ISO DNMG holder that accommodates the 55° rhombic form, 4.76 mm plate thickness and cylindrical hole for correct clamping. Which materials are recommended for machining with this grade? The T9225 grade on the DNMG150412 Tungaloy turning insert is formulated for medium to heavy steel machining and performs reliably under slightly interrupted cuts where toughness is required. Is the insert single- or double-sided and how does that affect indexing? This DNMG150412 T9225 insert is double-sided, enabling two index positions before disposal; this doubles productive life per plate compared with single-sided designs and simplifies inventory handling. How does the CVD coating benefit machining performance? The CVD-coated carbide substrate of the DNMG150412 T9225 insert increases abrasion resistance and extends tool life, particularly when machining abrasive steels or under higher cutting speeds. What mounting features ensure repeatable seating of the insert? The cylindrical hole and ISO-compliant dimensions of the DNMG150412 T9225 insert provide secure, repeatable seating when used with the correct holder and clamping set; proper torque and a clean seat are essential for repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness, rhombic DNMG geometry and a 1.2 mm corner radius for stable, cost-effective medium-to-heavy steel turning; consult Metav Werkzeuge for compatibility with existing holders or order directly via Metav Werkzeuge if stock is required. DNMG150412 T9225 — Indexable turning insert, rhombic 55° (Tungaloy) A DNMG150412 T9225 indexable insert engineered for ISO-compliant external and internal turning in medium-to-heavy steel applications. CVD-coated carbide grade T9225 Robust universal grade for steel machining Rhombic DNMG geometry, 55° lead angle Double-sided insert with cylindrical hole High-performance cutting for reliable production The DNMG150412 T9225 insert combines a CVD-coated carbide substrate with a robust universal grade that is optimised for medium-to-heavy steel turning where variable engagement conditions demand extra toughness. This construction supports stable chip formation and reduces the frequency of tool changes, leading to measurable time savings on repetitive operations. The grade’s balance of hardness and toughness helps maintain cutting edge integrity under light interruptions, making it suitable for batch and mixed-production environments where consistent results are required. Geometry and compatibility for predictable results The rhombic geometry with a 55° lead angle and a corner radius of 1.2 mm provides a versatile cutting profile that improves tool life and surface finish when matched to the correct holder. The insert’s 0° relief angle and 4.76 mm plate thickness contribute to rigidity; being double-sided with a cylindrical hole increases economic return per insert. Compatibility with ISO indexable holders is determined by form, relief angle, tolerance class, clamping and size, so matching the insert’s specifications to the machine holder ensures repeatable, precise engagement and reduces vibration during turning. Practical selection and machining guidance Select the T9225 chipbreaker and grade according to workpiece material, cutting parameters and machine stability; the double-sided design supports cost-efficiency by offering two usable edges per index. For mixed or interrupted cuts, this grade’s toughness reduces the risk of premature edge failure while still delivering effective wear resistance. When adapting cutting data, prioritise modest increases in feed over speed to preserve edge life, and confirm holder compatibility to exploit the insert’s ISO-conformity and achieve consistent surface quality. For precise matching of holder geometry and to check current availability of the DNMG150412 T9225 from Tungaloy, contact Metav Werkzeuge for tailored advice and order processing: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6781241 Manufacturer SKU: TUN6781241 SKU: 6781241-Tungaloy Model series: ISO indexable turning inserts Material: carbide Core specifications Corner radius: 1.2 mm Lead angle: 55° Relief (free) angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm ISO designation: 150412 Design & features Rhombic plate geometry (DNMG) Cylindrical hole for clamping Double-sided, indexable CVD-coated carbide, grade T9225 Suitable for external and internal turning Recommended for medium-to-heavy steel machining FAQ What materials is this insert best suited for? The DNMG150412 T9225 insert is formulated for medium-to-heavy steel machining; the T9225 CVD-coated carbide offers toughness and wear resistance appropriate for variable engagement conditions. How does the 55° lead angle influence cutting behaviour? A 55° lead angle on the rhombic insert reduces radial cutting forces and improves chip flow, helping the DNMG150412 T9225 deliver better surface finish and extended edge life under many turning conditions. Is the insert reversible and how many cutting edges are available? This is a double-sided insert with indexing capability, so each insert provides multiple usable edges, supporting improved cost-efficiency per cutting edge for serial production. Which holder characteristics must be checked for compatibility? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; ensure the holder matches the DNMG150412 dimensions and the ISO interface to guarantee secure clamping and repeatable results. What are the plate thickness and corner radius of this insert? The insert has a plate thickness of 4.76 mm and a corner radius of 1.2 mm, values that contribute to rigidity and a balanced cutting profile for general steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9225 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide toughness (T9225), a 55° rhombic geometry and a 1.2 mm corner radius to secure stable performance in medium-to-heavy turning operations; order directly via Metav Werkzeuge or ask the consultants for compatibility advice. DNMG 150412 T9225 turning insert — Tungaloy (CVD-coated carbide, 55°) A DNMG150412 T9225 ISO turning insert designed for robust medium-to-heavy steel turning, offering consistent chip control and repeatable edge life in variable engagement conditions DNMG ISO 55° rhombic geometry CVD-coated carbide grade T9225 1.2 mm corner radius for strength Double-sided insert with cylindrical hole Consistent productivity and predictable tool life for turning The rhombic 55° geometry combined with the T9225 CVD-coated carbide delivers a reliable balance between toughness and wear resistance, especially for interrupted or variable cuts. This combination reduces unplanned stops by improving edge stability and heat resistance during extended cycles. The measurable advantage is predictable tool life under mixed engagement, which supports planning for tool changes and reduces setup variability on batch and serial production lines. Secure clamping and ISO compatibility for safe operation Compatibility depends on matching form, relief angle, tolerance class, fixing method, size and thickness to the chosen holder. The insert is double-sided and supplied with a cylindrical centre hole, enabling secure seating and positive clamping in standard ISO indexable holders and boring bars. Correct seat selection and torque-controlled fastening minimise the risk of movement under load and maintain concentricity, translating directly into repeatable part tolerances and fewer rejects. Material and coating explained: why T9225 counts The T9225 designation denotes a CVD-coated carbide grade optimised for demanding steel applications. The chemical vapour deposition layer improves thermal stability and wear resistance, while the carbide substrate retains toughness. For medium-to-heavy steel turning this means improved resistance to flank wear and crater formation, particularly where cutting conditions vary. In plain terms: the coating extends cutting performance at elevated temperatures while the substrate prevents premature chipping in interrupted cuts. Geometry, corner radius and chip control for quality surfaces The 1.2 mm corner radius provides a compromise between edge strength and surface finish; it supports higher feedrates with lower risk of edge failure compared with sharper radii. The insert’s double-sided design offers two cutting edges per side, increasing economical indexability. Choose the appropriate chipbreaker and grade to match the stability of the setup and the steel grade being machined to obtain consistent surface quality and reduced secondary operations. For reliable medium-to-heavy turning choose the Tungaloy T9225 DNMG150412 insert — contact Metav Werkzeuge for detailed compatibility checks and application recommendations via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780930 Manufacturer SKU: TUN6780930 SKU: 6780930-Tungaloy Model series: ISO turning inserts Designation: DNMG150412 Facts Corner radius: 1.2 mm Insert thickness: 4.76 mm Geometry angle: 55° Insert size: 15 mm Special features Coating: CVD-coated carbide (T9225) Material: carbide Shape: rhombic (DNMG) Hole: with cylindrical hole Chipbreaker: double-sided Relief angle: 0° Application: turning FAQ What materials is this insert suited for? The DNMG150412 T9225 insert is optimised for medium-to-heavy steel turning; the T9225 CVD-coated carbide offers improved wear resistance and toughness for variable cutting conditions. How many usable edges are available on the insert? As a double-sided rhombic insert with a central hole, the DNMG150412 provides multiple indexable cutting edges, allowing rotation to fresh edges to extend overall tool life. Does the insert fit standard ISO holders? Compatibility is determined by form, relief angle, tolerance class, fixing method, size and thickness; DNMG150412 follows ISO dimensions and seats in matching DNMG holders when clamped correctly. What benefit does the 1.2 mm corner radius provide? A 1.2 mm radius increases edge strength and permits higher feeds with reduced chipping risk, supporting more productive cutting in less stable or interrupted operations. Why choose the T9225 grade over other coatings? T9225 combines a wear-resistant CVD layer with a tough carbide core, giving balanced performance for demanding steel machining where intermittent cuts and changing engagement occur. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9225 Wendeplatten - Tungaloy
Benefit from a CVD‑coated carbide T9225 grade and the ISO‑standard DNMG150412 geometry for reliable medium‑to‑heavy steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for application support. DNMG150412 T9225 insert for turning — Tungaloy The DNMG150412 T9225 is an ISO‑standard rhombic turning insert engineered for medium to heavy steel machining with a robust CVD‑coated carbide grade. CVD‑coated carbide grade T9225 ISO‑standard rhombic DNMG form 55° approach angle for versatile turning Double‑sided chipbreaker, cylindrical hole Consistent fit and quick integration at the machine The insert is manufactured to ISO tolerances so it integrates predictably with compatible toolholders; compatibility depends on form, clearance angle, tolerance class, fastening style, size and plate thickness. This standardisation reduces setup time and variability in production runs and supports reproducible clamping security. For workshop planners, the DNMG150412 geometry delivers an established interface to popular external holders and boring bars, allowing a smooth changeover between tools without extensive fixture modification. Grade and coating designed for challenging steel work The combination of CVD‑coated surface and carbide substrate in grade T9225 gives the insert enhanced toughness for variable or slightly interrupted cuts common in medium to heavy steel turning. The coating improves wear resistance and heat tolerance while the substrate maintains edge stability during elevated loads. For process engineers, this means fewer unexpected insert changes, improved component tolerances and steady machining performance across mixed batches where cutting conditions vary. Geometry and features that influence productivity and surface finish A rhombic plate form with a 55° approach angle and a corner radius of 1.2 mm balances edge strength and achievable surface finish. The double‑sided chipbreaker supports controlled chip formation, reducing rework and cycle interruptions, while the cylindrical hole mounting ensures secure fixation with standard screws and shims. The plate thickness of 4.76 mm enhances rigidity at the cutting edge; combined with the chipbreaker design, this delivers dependable material evacuation and consistent results in both external and internal turning applications. The system concept—insert, holder, shim and fastening screw—should be considered as a unit when optimising for feed and depth of cut. For application guidance or to confirm the correct DNMG150412 T9225 Tungaloy insert for a specific turning task, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for expert support Technical data Article number: 6780793-Tungaloy Manufacturer article number: 6780793 SKU (manufacturer): TUN6780793 Material: carbide Grade/coating: T9225 (CVD‑coated) Facts Corner radius: 1.2 mm Approach angle: 55° Plate thickness: 4.76 mm Plate size: 15 mm Special features Rhombic plate form (DNMG) Cylindrical hole mounting Double‑sided chipbreaker ISO turn insert for external and internal turning System components: insert, holder, shim, fastening screw FAQ What materials is this insert suited for? The DNMG150412 T9225 insert is designed primarily for medium to heavy steel machining; the T9225 grade provides toughness for variable and slightly interrupted cuts. How is compatibility with a toolholder determined? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure and repeatable clamping with standard ISO holders. What benefits does the T9225 coating bring? The CVD‑coated T9225 grade improves wear resistance and heat tolerance while the carbide substrate maintains edge stability, helping to extend tool life and preserve surface integrity. Can the insert be used on internal turning operations? Yes, the ISO rhombic geometry and double‑sided chipbreaker allow application in both external and internal turning when paired with a suitable boring bar or internal holder. Which system parts are required to mount the plate? A compatible external holder or boring bar, an underlay/shim and the correct fastening screw are required to mount the insert securely and achieve consistent cutting results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide T9225 for reliable toughness, the DNMG150412 rhombic geometry for repeatable seating, and the double‑sided chipbreaker for consistent chip control — all designed for productive medium‑to‑heavy turning. Order directly via Metav Werkzeuge or consult the technical team for application support. DNMG150412 T9225 — Indexable Insert for Turning by Tungaloy The DNMG150412 T9225 is an ISO‑standard rhombic indexable insert intended for external and internal turning operations in steel machining. CVD-coated carbide grade T9225 for toughness ISO DNMG150412 rhombic geometry Double-sided chipbreaker, with centre hole For medium to heavy steel turning Delivering stable cutting performance for demanding turning The combination of a CVD‑coated surface and the T9225 carbide grade gives this indexable tip increased toughness and wear resistance, which is advantageous when cutting conditions change or when interrupted cuts occur. With a designed corner radius of 1.2 mm, the insert supports robust tool engagement and helps maintain dimensional stability in heavy passes. These material and geometry choices translate into fewer unexpected tool failures and a more predictable production flow, which is critical for jobbing shops and serial manufacturing that require consistent cycle times. Clear compatibility and precise seating for reliable clamping This insert follows ISO designation DNMG150412, ensuring compatibility is defined by the insert form, 0° relief angle, tolerance class, clamping method, size and thickness. The insert’s nominal size is 15 mm with a plate thickness of 4.76 mm, and it features a cylindrical centre hole for secure fixing. When selecting a matching external holder or boring bar, attention to these dimensional parameters guarantees correct seating and repeatable positioning, reducing vibration and improving tool life through stable mechanical fixation. Optimised chip control and productivity gains A double‑sided chipbreaker design provides two cutting edges per side and improved chip formation for steel applications, reducing the need for frequent edge changes. Effective chip control reduces heat concentration and minimises rework from poor surface finish, which increases net productivity. For operations that alternate between finishing and semi‑finishing, the chipbreaker and the insert’s toughness support shorter set‑up times and more efficient material removal rates, delivering a favourable cost‑benefit over the production run. Practical integration into the tooling system and application advice In a standard system the insert pairs with a suitable external holder or boring bar, plus a backing plate or clamping kit and replacement screws for quick maintenance. Selection of the chipbreaker style and grade should be matched to workpiece material and machining stability: choose the robust T9225 grade for medium to heavy steel turning where intermittent cuts or variable engagement occur. For workshops seeking repeatable results, pairing this insert with a rigid holder and correct torque on the clamping screw ensures optimal performance and extended edge life. Speak to Metav Werkzeuge for tailored application recommendations and to source Tungaloy DNMG150412 T9225 indexable inserts optimised for robust steel turning Technical data Article number: 6780968 Manufacturer SKU: TUN6780968 SKU: 6780968-Tungaloy Model series: ISO turning indexable inserts Material: carbide Numbers / Core technical data Corner radius: 1.2 mm Insert size: 15 mm Plate thickness: 4.76 mm Relief angle: 0° Cutting angle: 55° Designs / Special features CVD‑coated carbide T9225 Rhombic shape (DNMG) Double‑sided chipbreaker Cylindrical centre hole for clamping ISO‑standard insert for external and internal turning FAQ Which materials is this insert suited for? The DNMG150412 T9225 insert from Tungaloy is designed primarily for medium to heavy steel turning and performs well where toughness is needed under variable cutting conditions. How can compatibility with a toolholder be ensured? Compatibility depends on the insert form, relief angle, tolerance class, clamping method, size and thickness; confirm the holder matches the DNMG150412 dimensions and clamping style before use. Is the insert reversible or single‑use per edge? The rhombic insert is double‑sided with a chipbreaker on both sides, offering multiple usable cutting edges and efficient edge changes in production. What are the practical advantages of the T9225 grade? The T9225 CVD‑coated carbide grade provides increased toughness and stable wear behaviour, making it suitable for interrupted cuts and medium‑to‑heavy removal rates in steel. How should the insert be combined in a tooling system? Use the insert with a matched external holder or boring bar, a backing plate or clamping kit and the correct replacement screws; ensure rigid mounting and correct torque for consistent results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9225 Wendeplatten - Tungaloy
Combining a robust T9225 CVD coating with a 1.2 mm corner radius and ISO rhombic geometry delivers stable, repeatable performance for medium‑to‑heavy steel turning; order the DNMG150412 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150412 T9225 turning insert — CVD-coated carbide, 1.2 mm corner radius (Tungaloy) DNMG150412 T9225 is an ISO turning insert engineered for versatile external and internal turning in steel applications, offering a balanced mix of toughness and wear resistance for interrupted or variable cutting conditions ISO rhombic insert, 55° cutting geometry CVD-coated carbide grade T9225 1.2 mm corner radius for robust cuts Double-sided chipbreaker, with cylindrical hole Stable performance for medium‑to‑heavy steel turning The combination of a CVD-coated cemented carbide substrate and the T9225 grade provides a reliable balance between wear resistance and toughness, intended for medium to heavy steel machining. The coating reduces flank and crater wear during continuous operation, while the substrate toughness mitigates chipping under slightly interrupted cuts. This results in fewer unplanned tool changes and more consistent cycle times, improving process predictability and lowering overall machining cost per part. Compatibility with standard tooling systems follows ISO conventions, which supports seamless integration into existing turning setups. Geometry that ensures repeatable part quality The rhombic DNMG form with a 55° included angle and a 1.2 mm corner radius provides substantial edge strength for roughing and semi‑finishing passes. The insert’s 4.76 mm thickness and cylindrical hole ensure secure clamping in the pocket, reducing vibration and improving surface integrity. The double‑sided chipbreaker gives two usable cutting positions, extending the serviceable life of each indexable insert. In practice, the geometry translates into stable cutting forces and more predictable surface finish, particularly when machining steels where rigidity and tool support are decisive for repeatability. Operational efficiency, mounting and grade selection Using an ISO indexable insert like this one enables rapid edge changes and straightforward inventory management. The DNMG150412 is designed to work with compatible external holders or boring bars; the fit is determined by form, clearance angle, tolerance class, attachment method, size and thickness. Selecting the double‑sided chipbreaker and the T9225 grade is advisable where variable engagement or occasional interruptions occur, as the grade adds toughness without sacrificing wear resistance. For application advice on feeds, speeds or holder pairing, guidance is available to match the insert to machining dynamics and stability, ensuring longer tool life and higher productivity. For stable, productive turning with Tungaloy’s T9225 grade, contact Metav Werkzeuge for availability and tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781344 Manufacturer SKU: TUN6781344 SKU: 6781344-Tungaloy Manufacturer: Tungaloy Facts Corner radius: 1.2 mm Included angle: 55° Thickness: 4.76 mm Insert size: 15 mm Manufacturer article number: 6781344 Special features ISO turning indexable insert CVD-coated cemented carbide Grade T9225 — universal, robust for steel machining Rhombic plate form (DNMG) Double-sided chipbreaker Cylindrical hole for secure mounting Compatible with external holders and boring bars FAQ What materials is this insert suited for? The DNMG150412 T9225 insert is specified for medium to heavy steel machining; the T9225 grade combines wear resistance and toughness for varying engagement conditions. How is the insert mounted and secured? Mounting is via the central cylindrical hole into a compatible holder or boring bar; correct fit depends on form, clearance angle, tolerance class, attachment and plate thickness. How many usable edges are available per insert? The insert features a double‑sided chipbreaker, allowing two indexable cutting positions before replacement is required. What benefits does the CVD coating provide? A CVD-coated surface improves resistance to abrasive and thermal wear, extending tool life and stabilising cutting performance in steel turning. Which factors determine optimal grade and chipbreaker selection? Choice depends on workpiece material, machining stability and the nature of the cut (continuous or interrupted); the T9225 grade is recommended for robust, variable conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD‑coated carbide grade and ISO‑standard geometry for reliable turning performance; the insert’s double‑sided design and cylindrical hole ensure secure clamping and predictable tool life. Order the DNMG150412 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150412 T9225 turning insert for Drehen by Tungaloy The DNMG150412 T9225 is an ISO‑standard rhombic indexable turning insert designed for external and internal turning, offering a tough universal grade for medium to heavy Stahl machining. CVD‑coated carbide grade T9225 Robust universal grade for Stahl machining Rhombic 55° geometry, 1.2 mm corner radius Double‑sided insert with cylindrical hole Consistent performance for demanding turning tasks The insert combines a CVD coating with a carbide substrate to deliver wear resistance under varying cutting conditions. The T9225 grade is specified for medium to heavy Stahl machining, where intermittent cuts or fluctuating engagement demand elevated toughness rather than the finest wear resistance alone. This balance reduces the frequency of tool changes and supports stable cycle times in batch production. The rhombic DNMG form with a 55° included angle provides a versatile cutting edge suitable for general profiling and light finishing steps, while the 1.2 mm radius improves edge strength for roughing passes. Clear guidance on compatibility and secure clamping Compatibility between insert and holder depends on geometry, relief angle, tolerance class, fastening style, size and thickness; these factors determine seating and clamp stability. The insert is supplied with a cylindrical hole, enabling positive locating and secure clamping in compatible toolholders. The listed 0° relief angle and the ISO designation simplify selection of matching external holders or boring bars; ensure the holder accepts a rhombic DNMG 15 size with 4.76 mm thickness to achieve correct axis position and repeatable clamping accuracy. Practical benefits in machining and lifecycle economy Choosing a universal, robust grade reduces the risk of unexpected edge failure during interrupted cuts and offers a compromise between tool life and process security. The CVD coating enhances thermal resistance at elevated speeds and prolongs edge integrity in sustained contact with Stahl. Fewer tool changes and predictable wear progression translate into higher productivity and less downtime, which supports lean production practices. The insert’s double‑sided design maximises usable edges per index and lowers consumable costs per machined component. Selecting geometry and process parameters for best results The DNMG geometry with a 1.2 mm corner radius provides increased chip‑forming volume and a smoother surface finish than sharper radii, making it a reliable choice for semi‑roughing and finishing sequences where consistent surface quality is required. For optimal performance, match feed and depth of cut to the radius: larger radii favour higher radial depths and smoother finishes, while lighter feeds preserve edge life during fine finishing. Use cutting data charts from the holder or insert supplier as a starting point and adjust based on workpiece clamping and machine rigidity. For tailored advice on Tungaloy indexable inserts and to order the DNMG150412 T9225 or compatible holders, contact Metav Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 — consultants are available to recommend the right insert and supply SKU TUN6780808. Technical data Article number: 6780808 Manufacturer SKU: TUN6780808 SKU: 6780808-Tungaloy Model series: ISO‑Drehwendeschneidplatten Name: DNMG150412 T9225 Tungaloy insert Material: Hartmetall Key measurements Insert size: 15 mm Thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 55° Relief angle: 0° Hole: with cylindrical hole Special features Coating: CVD Grade: T9225 (robust universal) Chipbreaker: double‑sided Shape: rhombic (DNMG) ISO‑standard indexable insert Application: Drehen (external and internal turning) FAQ What determines whether this insert fits a particular holder? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; check that the holder accepts a rhombic DNMG 15 insert with 4.76 mm thickness and a cylindrical hole for secure clamping. Which materials is the insert suited for? The T9225 grade is a robust universal grade intended for medium to heavy Stahl machining; the CVD‑coated carbide substrate provides thermal resistance and edge stability under typical turning conditions. Is the insert suitable for interrupted cuts? Yes. The T9225 composition emphasises toughness to withstand varying engagement and light interruptions while maintaining a reasonable tool life. How does the DNMG geometry affect surface finish and stability? The 55° DNMG geometry with a 1.2 mm radius increases edge strength and produces a smoother finish than smaller radii; it is particularly beneficial in semi‑roughing and finishing where machine and workpiece rigidity are adequate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150412 T9235 Wendeplatten - Tungaloy
Combining the CVD-coated carbide T9235 toughness with the rhombic 55° geometry delivers reliable performance in interrupted and unstable turning operations; order directly via Metav Werkzeuge or request application guidance from our technical team. DNMG 150412 T9235 indexable turning insert — Tungaloy, rhombic 55° for turning DNMG150412 T9235 Tungaloy turning insert offers robust performance for external and internal turning, optimised for steel and interrupted cuts with a durable CVD coating. DNMG rhombic 55° geometry CVD-coated carbide grade T9235 Designed for interrupted cuts and unstable conditions Double-sided chipbreaker with cylindrical hole Stable cutting under interrupted and unstable conditions The rhombic 55° geometry and the T9235 CVD-coated carbide are engineered to maintain cutting stability where conditions are less consistent. The insert’s design reduces chipping and vibration during interrupted cuts, which supports a steadier process and fewer tool changes. With a corner radius of 1.2 mm the insert balances edge strength and cutting performance, enabling a more predictable chip formation and prolonging tool life in demanding turning operations. Precise fit and straightforward holder compatibility Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; therefore the plate’s ISO conformity simplifies selection of a matching holder and clamping set. The insert’s 4.76 mm thickness and 15 mm size make it suitable for many standard ISO holders designed for rhombic plates, while the cylindrical hole supports secure fastening. This predictable interface reduces setup time and supports consistent concentricity during external and internal turning. Material suitability and coating advantages The carbide substrate combined with a CVD coating provides a hard, wear-resistant surface while retaining core toughness, which is particularly effective when machining steel at lower cutting speeds or under interrupted conditions. The selected grade emphasises stable chip control and longer edge life rather than maximising speed; this trade-off lowers downtime and fits operations where reliability in challenging cuts is decisive. The double-sided chipbreaker further refines chip evacuation for clearer cut surfaces. Operational economy and handling benefits By favouring a tougher grade and a geometry optimised for instability, this insert reduces the frequency of insert changes and the incidence of scrap due to edge failure, supporting a more economical machining cycle. The double-sided nature provides two usable edges per index, and the standardised dimensions make spare stocking and replacement straightforward. For workshops seeking reliable performance in mixed or interrupted turning tasks, the combination of CVD-coated carbide, rhombic geometry and secure clamping contributes to steady throughput and predictable maintenance intervals. Contact Metav Werkzeuge for tailored application advice or to arrange prompt supply of Tungaloy inserts and compatible clamping sets via Metav Werkzeuge. Technical data Article number: 6785804 Manufacturer SKU: TUN6785804 SKU: 6785804-Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 1.2 mm Included angle: 55° Plate thickness: 4.76 mm Size: 15 mm Special features CVD-coated carbide (T9235) Rhombic plate, 55° included angle Double-sided chipbreaker With cylindrical hole ISO standard plate designation DNMG150412 Designed for turning (external and internal) Suited to steel, interrupted cuts, unstable conditions Part of system: insert, external holder/turning bar, shim/clamping set, replacement screws FAQ What applications is this insert best suited to? This DNMG150412 T9235 Tungaloy turning insert is intended for external and internal turning, especially where interrupted cuts or unstable conditions occur; it is optimised for machining steel with reliable chip control. How does the T9235 grade affect performance? The T9235 CVD-coated carbide grade emphasises toughness and wear resistance, giving the insert greater edge strength at lower cutting speeds and improving performance in interrupted or unstable operations. Can this insert be used with standard ISO holders? Yes, the ISO-conforming plate form, thickness and hole style mean the insert is compatible with matching ISO external holders and clamping sets when the holder matches form, clearance angle and tolerance class. How many cutting edges are available per insert? The insert features a double-sided chipbreaker, providing multiple usable edges for indexing before replacement. What key dimensions should be checked when selecting a holder? Confirm plate size (15 mm), plate thickness (4.76 mm), included angle (55°), corner radius (1.2 mm) and the cylindrical hole for correct fastening and stable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9235 Wendeplatten - Tungaloy
Combining a CVD‑coated carbide T9235 with a 55° rhombic geometry and a 1.2 mm corner radius ensures stable material removal in interrupted or unstable turning conditions; order the DNMG150412 T9235 indexable insert directly via Metav Werkzeuge or contact the consultants for tailored grade and holder advice. DNMG 150412 T9235 – Indexable turning insert for turning, 55° (Tungaloy) A DNMG150412 T9235 indexable turning insert engineered for external and internal turning, offering a tough CVD‑coated carbide grade for improved performance in unstable cutting situations CVD-coated carbide grade T9235 55° rhombic geometry, DNMG form 1.2 mm corner radius for robust cuts Double-sided chipbreaker, cylindrical hole Reliable performance for interrupted and unstable cuts The combination of a tough CVD coating and a resilient substrate delivers predictable tool life when machining steels at moderated speeds. The coated carbide T9235 grade is designed to absorb shock and resist flank wear under conditions with strong interruptions or variable rigidity, which translates into fewer unscheduled insert changes and less downtime. As an ISO‑compliant turning solution, the insert supports consistent process parameters and simplifies tool inventory through standard geometry and tolerances. Geometry tuned for process stability and surface integrity A 55° rhombic form with a corner radius of 1.2 mm balances strength and cutting action: the angle provides favourable approach geometry for turning, while the radius increases edge robustness and reduces the risk of chipping during roughing passes. The double‑sided chipbreaker helps control chip formation and evacuation, improving surface finish and reducing built‑up edge formation. The central cylindrical hole assures secure clamping and repeatable positioning in ISO‑compatible holders for reliable repeatability. Clear guidance on application and holder compatibility Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the insert’s ISO DNMG designation and standard thickness facilitate selection of matching external holders or boring bars. This grade is optimised for machining steel, especially where cut stability is limited and interrupted cuts occur. For internal and external turning operations the insert provides a pragmatic compromise between toughness and wear resistance, enabling productive machining with fewer insert replacements. Practical benefits for production workflows Integrating this indexable insert into a turning line reduces the frequency of edge failures and contributes to steadier cycle times. The CVD coating enhances resistance to abrasive wear, while the geometry and chip control support safer machining under variable conditions. Operators and machining planners benefit from a predictable performance envelope, simplified grade selection and the ability to pair the insert with standard ISO holders and clamping kits for minimal set‑up complexity. For reliable machining with the DNMG150412 T9235 insert and expert advice on holder selection, contact Metav Werkzeuge for grade recommendations and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6785882 Manufacturer SKU: TUN6785882 SKU: 6785882-Tungaloy Manufacturer: Tungaloy Model series: ISO indexable turning inserts Facts Geometry angle: 55° Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm ISO designation: 150412 Special features CVD-coated carbide Grade: T9235 Rhombic plate form (DNMG) Double-sided chipbreaker Cylindrical central hole Application: external and internal turning Suited for machining steel ISO‑compliant dimensions and tolerances FAQ What materials is this insert designed to machine? The DNMG150412 T9235 indexable insert is formulated primarily for machining steel; the T9235 grade provides toughness for unstable or interrupted cutting situations. How does the T9235 grade compare to tougher or harder grades? The T9235 grade emphasises toughness and stable chip formation over maximum cutting speed; it is preferable where interruptions or variable rigidity occur rather than for extremely high‑speed finishing. Which toolholders are compatible with this insert geometry? Compatibility is governed by the DNMG form and ISO dimensions; standard DNMG external holders and matching boring bars that accept 55° rhombic inserts with a 4.76 mm thickness and central cylindrical hole will be suitable. Can the insert be used for both roughing and finishing? The insert’s 1.2 mm corner radius and double‑sided chipbreaker favour robust roughing operations and semi‑finishing; for fine finishing, a smaller radius or a specifically dedicated finishing insert may be chosen. Is the insert supplied with fastening hardware or clamping sets? Supply scope varies by ordering channel; the insert itself is provided as a DNMG ISO indexable plate. For holder, clamping set and screw requirements consult Metav Werkzeuge for the correct assembly components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9235 Wendeplatten - Tungaloy
Reliable combination of CVD‑coated carbide T9235, a 55° rhombic geometry and a double‑sided design delivers consistent performance for challenging turning tasks; order the DNMG150412 T9235 directly via Metav Werkzeuge or consult the technical team if clarification is required DNMG150412 T9235 turning insert by Tungaloy — ISO rhombic 55° The DNMG150412 T9235 is an ISO‑standard rhombic turning insert designed for external and internal turning, offering robust performance in interrupted cuts and less stable machining conditions CVD‑coated carbide grade T9235 Rhombic 55° geometry for versatile turning Double‑sided insert with cylindrical hole Suitable for unstable and interrupted cuts Precision and productivity for turning operations The DNMG150412 T9235 insert combines a CVD‑coated carbide substrate with a proven rhombic geometry to deliver consistent cutting performance across a range of steels and engineering materials. The T9235 grade is formulated for toughness, which helps to resist chipping and edge fracture during interrupted cuts or when stability is limited. For production environments that prioritise throughput and repeatability, the design of this indexable insert supports longer tool life and fewer unplanned changes, contributing to lower overall machining costs and improved process reliability. Stable machining under interrupted and unstable conditions A key advantage of this insert is its suitability for harsher conditions: the tough carbide grade and robust chip control make it effective where vibrations, interrupted cuts or variable material properties would otherwise compromise finish or life. The rhombic 55° shape provides a balanced cutting action that eases engagement and reduces cutting forces, while the double‑sided layout doubles the available cutting edges before indexation. This combination reduces tool change frequency and helps maintain consistent cycle times in serial production and workshop settings. Compatibility and system benefits that reduce downtime Designed to ISO standards, the DNMG150412 insert fits a wide range of holders when matched for form, relief angle, tolerance class, fastening and size, which simplifies procurement and inventory. The presence of a cylindrical hole enables secure clamping and straightforward replacement using standard screws and clamping sets, and the 0° relief and 55° approach angle support common external and internal turning set‑ups. Specifying ISO‑compliant inserts streamlines tool management, shortens set‑up time and ensures predictable outcomes across different machines and operators For tailored technical advice on the Tungaloy DNMG150412 T9235 CVD‑coated turning insert and to arrange supply through Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Manufacturer article number: 6785932 Manufacturer SKU: TUN6785932 SKU: 6785932-Tungaloy Model series: ISO turning indexable inserts Designation: DNMG150412 T9235 Dimensions & Angles Corner radius: 1.2 mm Insert size: 15 mm Thickness: 4.76 mm Relief angle: 0° Approach angle: 55° Materials & Features Material: carbide Coating: CVD Grade: T9235 Shape: rhombic Hole: with cylindrical hole Chipbreaker: double‑sided Application: turning (external and internal) FAQ What materials is this insert suited for? The DNMG150412 T9235 insert is a tough CVD‑coated carbide grade optimised for machining steel and similar materials under lower cutting speeds and interrupted conditions. How does the T9235 grade differ from tougher or harder grades? T9235 emphasises toughness and stable chip formation, making the insert appropriate where interrupted cuts or unstable set‑ups would risk chipping on harder, less resilient grades. Is this insert compatible with standard ISO DNMG holders? Yes, the insert is ISO‑designated (DNMG150412) and is compatible with holders that match the form, relief angle, tolerance class, fastening, size and thickness. How many usable edges does the insert provide before disposal? The rhombic, double‑sided design provides multiple cutting edges; edge count depends on indexation strategy, but the double‑sided construction effectively doubles the available edges compared with single‑sided variants. What is the significance of the cylindrical hole? The cylindrical hole enables reliable clamping and simple replacement using standard clamping sets and screws, improving repeatability and reducing changeover time. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T9235 and the 55° rhombic geometry to secure reliable performance in interrupted and unstable turning operations; combine toughness and repeatable edge life for consistent batch throughput. Order the insert directly via Metav Werkzeuge or consult the technical team for application support. DNMG150412 T9235 indexable turning insert, 55° — Tungaloy A DNMG150412 T9235 indexable turning insert designed for external and internal turning, offering a tough CVD-coated carbide grade for interrupted cuts and unstable machining conditions. CVD-coated carbide grade T9235 for steel 55° rhombic insert with 1.2 mm corner radius Double-sided chipbreaker for interrupted cuts Compatible with ISO-standard turning toolholders Consistent performance where stability is limited The CVD-coated carbide composition delivers a balance of toughness and wear resistance that is particularly effective at lower cutting speeds and during interrupted cuts. The rhombic 55° geometry combined with a 1.2 mm corner radius provides predictable engagement with the workpiece, reducing the risk of edge chipping when machining unstable setups. This configuration supports steady material removal rates and improved process reliability, making it suitable for mixed-batch production where conditions vary. Longer usable life through coating and grade selection A CVD coating on a robust carbide substrate reduces flank wear and helps maintain geometry over multiple indexing cycles. The grade T9235 is optimised for steel machining under more demanding conditions, prolonging tool life and decreasing the frequency of tool changes. With the double-sided chipbreaker, the insert offers two usable cutting edges per side, which enhances economy and simplifies inventory management in production environments. Straightforward compatibility and mounting guidance The insert conforms to ISO dimensions for rhombic turning plates, ensuring fitment with standard clamping systems and holders. Key mounting details include the cylindrical hole and standard thickness of 4.76 mm, which determine stack height and clamping requirements. When selecting a holder, match form, relief angle, tolerance class, fixation and thickness to maintain cutter geometry and secure retention during machining. Proper seating prevents vibration and supports chip evacuation. Application focus and selection advice This indexable carbide plate is intended primarily for turning applications on steel under interrupted or unstable cutting conditions. The double-sided chipbreaker design aids controlled chip formation where cut continuity is compromised, while the CVD surface treatment supports improved edge stability. For finishing tasks, consider the corner radius and adjust feeds to achieve the desired surface quality; for roughing, the tough grade resists breakage under heavier engagement. Contact Metav Werkzeuge for tailored application advice and rapid supply of Tungaloy DNMG150412 T9235 indexable inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6785984 Manufacturer SKU: TUN6785984 SKU: 6785984-Tungaloy Name: DNMG150412 T9235 turning insert Facts Corner radius: 1.2 mm Relief angle: 0° Insert angle: 55° Thickness: 4.76 mm Inscribed circle: 15 mm Special features Material: carbide Coating: CVD-coated, grade T9235 Double-sided chipbreaker Rhombic geometry Cylindrical hole ISO-standard turning insert Application: turning; optimised for steel, interrupted cuts and unstable conditions FAQ What materials is this insert suited for? The DNMG150412 T9235 insert is optimised for machining steel; the tough CVD-coated carbide performs well at lower cutting speeds and in interrupted operations. How is the insert mounted in a toolholder? The plate uses a cylindrical hole and standard ISO dimensions; match holder form, tolerance class and thickness to secure correct seating and clamping. What does the double-sided chipbreaker mean for production? A double-sided chipbreaker provides controlled chip formation on both faces and effectively doubles the number of usable cutting positions per plate, improving economy. Is the corner radius suitable for finishing passes? The 1.2 mm corner radius offers a compromise between edge strength and surface finish; reduce feed and depth of cut for finer surface quality when required. How does the CVD coating affect tool life? The CVD coating enhances wear resistance and edge stability, extending the usable life of the carbide substrate, especially in demanding steel-turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness and ISO compatibility for dependable turning under unstable conditions; the insert’s double-sided chipbreaker and 1.2 mm corner radius ensure secure performance in interrupted cuts. Order directly via Metav Werkzeuge or consult our technical team for holder compatibility and application advice. DNMG150412 T9235 — Tungaloy ISO turning indexable insert, CVD-coated carbide, 55° rhombic The DNMG150412 T9235 is an ISO rhombic indexable insert for external and internal turning in steel, designed to perform reliably in interrupted cuts and unstable machining conditions. CVD-coated carbide grade T9235 55° rhombic geometry, 1.2 mm radius Double-sided chipbreaker, with cylindrical hole Robust for unstable, interrupted turning Consistent cutting performance where stability is limited This insert combines a CVD-coated carbide substrate with the T9235 grade to provide a tough edge suited to lower cutting speeds and highly interrupted operations. The material choice reduces chipping and extends edge life where shock and vibration occur, supporting a stable process window. By prioritising wear resistance and controlled edge geometry, the insert helps maintain dimensional accuracy during demanding turning tasks, improving uptime and reducing scrap rates. ISO compatibility and simple system integration Designed as an ISO rhombic DNMG format with a 55° lead angle, the insert fits standard ISO turning toolholders where form, clearance, tolerance class, clamping and thickness match. The with hole feature (cylindrical hole) and the specified plate thickness of 4.76 mm enable straightforward clamping and indexing. Compatibility depends on holder specification; the system concept comprises the insert, an appropriate outside holder or boring bar, backing plate/clamp set and replacement screws — a modular approach that simplifies inventory and maintenance. Practical benefits for workshop productivity and decision-making With a 1.2 mm corner radius and a double-sided chipbreaker, the insert offers a balance between edge strength and surface finish. For steel applications where interrupted cuts are common, this combination reduces the frequency of tool changes and supports predictable tool-life planning. Selection of the correct chipbreaker and grade yields fewer process interruptions and better overall machining economy, particularly for shops aiming to increase throughput while maintaining component quality. For expert advice on integrating the Tungaloy DNMG150412 T9235 insert into production and to confirm holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will support specification and supply. Technical data Article number: 6785870 Manufacturer SKU: TUN6785870 SKU: 6785870-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Part designation: DNMG150412 Facts Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 15 mm Lead/approach angle: 55° Clearance (relief) angle: 0° Hole: with cylindrical hole Special features CVD-coated carbide, grade T9235 Double-sided chipbreaker ISO rhombic plate form Suitable for external and internal turning Optimised for steel and interrupted cuts Compatible with ISO holders determined by form, clearance, tolerance class, clamping, size and thickness FAQ What materials is this insert designed for? The DNMG150412 T9235 insert from Tungaloy is formulated for machining steel, especially where interrupted cuts or unstable conditions demand a tough CVD-coated carbide grade. Can the insert be used for internal and external turning? Yes — the ISO rhombic geometry and standard dimensions make the DNMG150412 suitable for both external and internal turning when paired with the correct outside holder or boring bar. How does the T9235 grade affect tool life? The T9235 grade is designed for toughness at lower cutting speeds; it reduces chipping and supports longer edge life in interrupted machining, improving process reliability. Which SKU should be ordered for this insert? Order using article number 6785870 or manufacturer SKU TUN6785870 to ensure the correct DNMG150412 T9235 Tungaloy indexable insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9235 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated cemented carbide, a 1.2 mm corner radius and ISO rhombic geometry for consistent performance in unstable turning operations; order the DNMG150412 T9235 directly via Metav Werkzeuge or consult our specialists for process-friendly advice. DNMG150412 T9235 — Indexable turning insert, ISO rhombic, 55° — Tungaloy DNMG150412 T9235 is a robust ISO-indexable turning insert designed for external and internal turning in steels, offering a tough CVD-coated carbide grade for interrupted cuts and unstable conditions. CVD-coated cemented carbide grade T9235 Engineered for interrupted and unstable cuts ISO rhombic geometry with 55° cutting angle Double-sided insert with cylindrical hole Consistent cutting in unstable conditions The insert is made from CVD-coated cemented carbide, a combination that prioritises edge stability and predictable wear. The tough grade T9235 is formulated for steels at reduced cutting speeds and where cutting conditions are unstable or interrupted; this leads to fewer edge failures and more reliable cycle times. The design emphasises predictable tool life and reduced scrap rates, which supports smoother production flow and lower rework effort in mixed-batch or stop-start turning operations. Secure seating and versatile holder compatibility Thanks to the ISO rhombic geometry and standardised dimensions, the insert fits a wide range of external holders and boring bars. The cylindrical hole and accompanying fastening features ensure secure clamping and stable seat location, reducing the risk of micro-movements under load. Compatibility is determined by form, rake angle, tolerance class, fixing method, size and thickness, which simplifies holder selection and reduces setup time when integrating the insert into existing tool systems. Practical geometry for balanced finishing and roughing A 1.2 mm corner radius and a plate thickness of 4.76 mm offer a balanced compromise between strength and surface finish capability. The 55° cutting angle and rhombic profile enable versatile use for both light finishing passes and more aggressive material removal, depending on feed and depth-of-cut choices. The double-sided, reversible design maximises indexable life and reduces tool change frequency, improving uptime and lowering tooling costs per component. Application-focused advantages and selection guidance Designed primarily for turning of steel, the insert is best matched with a chipbreaker and grade that correspond to workpiece material, machining strategy and machine rigidity. Selecting the correct chipbreaker and matching the insert’s toughness to the machining stability will optimise process reliability. The ISO-standard format and clear dimensional data make it straightforward to compare alternatives and plan inventory for production or maintenance spare parts. Contact Metav Werkzeuge for tailored grade and holder recommendations or to place an order for the DNMG150412 T9235; expert advice is available to match the insert to specific steels and machine conditions. Technical data Article number: 6785931 Manufacturer SKU: TUN6785931 SKU: 6785931-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Coating/type: CVD-coated, grade T9235 Facts Corner radius: 1.2 mm Cutting angle: 55° Plate thickness: 4.76 mm Plate size: 15 mm Hole: cylindrical, with hole Special features Rhombic plate form (DNMG) Double-sided, reversible geometry ISO-standard insert for turning Designed for interrupted/unstable cuts Compatible with standard external holders and boring bars Chipbreaker: double-sided FAQ What materials is this insert intended for? The DNMG150412 T9235 insert from Tungaloy is intended primarily for machining steels and is optimised for interrupted and unstable cutting conditions. How does the T9235 grade affect performance? The T9235 CVD-coated grade provides a tougher carbide substrate, offering improved resistance to chipping in unstable cuts and extending usable edge life compared with harder, more brittle grades. Can the insert be used for both external and internal turning? Yes, the ISO rhombic geometry and 55° cutting angle allow the DNMG150412 T9235 to be used for both external turning and internal applications when paired with the appropriate holder or boring bar. What are the key dimensional data to check when selecting a holder? Verify the plate size (15 mm), thickness (4.76 mm), corner radius (1.2 mm) and the hole style (cylindrical) to ensure correct seating and clamping in the chosen holder. Is the insert reversible and how many cutting edges are available? The insert is double-sided and reversible, providing multiple usable cutting edges before replacement is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9235 for reliable performance in unstable turning conditions and the ISO-format geometry for straightforward holder compatibility; order directly via Metav Werkzeuge or consult our specialists for the optimal holder and clamp set. DNMG150412 T9235 turning insert — CVD-coated carbide, 55° (Tungaloy) DNMG150412 T9235 is an ISO-format turning insert designed for external and internal turning of steel under interrupted or less stable cutting conditions. CVD-coated carbide grade T9235 Optimised for unstable cutting conditions Double-sided chipbreaker for flexible use Rhombic form with cylindrical hole, 55° Consistent cutting in unstable machining conditions The CVD-coated carbide grade T9235 is formulated to deliver stable chip formation and durable edge life when machining steel at lower cutting speeds or where interruptions and varying rigidity occur. The coating provides thermal and adhesive resistance that reduces flank wear, while the substrate ensures toughness under shock loads. For production environments where insert life and predictable performance affect cycle times, this combination supports a more consistent output and fewer tool changes, improving overall process reliability. Clear compatibility and simple mounting for faster set-up The insert follows ISO dimensions and is supplied in a rhombic form with a cylindrical hole, enabling fast fitting in compatible indexable holders and boring bars. Compatibility is determined by form, clearance angle (0°), tolerance class, attachment method, size and thickness (4.76 mm); matching the insert to a holder that respects these parameters reduces runout and secures predictable cutting behaviour. The standardised geometry simplifies logistics and holder selection across mixed-machine fleets, reducing set-up time and potential errors in the workshop. Effective chip control and edge geometry for everyday production A double-sided chipbreaker combined with an edge radius of 1.2 mm offers a balance between robust edge strength and controlled chip flow, which is particularly valuable when facing interrupted cuts or variable feeds. The design supports both roughing passes and semi-finishing, enabling fewer insert changes and improved productivity. Describing technical choices: a larger edge radius improves edge strength and reduces microchipping, while the chipformer steers swarf away from the cutting zone to protect the component surface and tooling interface. Practical handling and system approach for longer uptime The ISO-series system setup envisages the insert together with a matched outer holder or boring bar, a shim/clamping set and replacement screws. Using ISO-format inserts allows standardised inventory management and facilitates faster tool changes. The insert’s 55° principal angle and robust substrate make it suitable for a wide range of turning operations; selecting the correct holder and clamping method preserves the insert’s life and achieves consistent surface quality. For maintenance planning, fewer interventions and predictable wear patterns translate directly into lower operating costs and higher machine availability. For tailored application advice and prompt availability contact Metav Werkzeuge; our consultants support holder selection and delivery to ensure the Tungaloy insert fits the intended turning task. Technical data Article number: 6785829 Manufacturer SKU: TUN6785829 SKU: 6785829-Tungaloy Model series: ISO turning inserts Facts Cutting angle: 55° Clearance angle: 0° Edge radius: 1.2 mm Thickness: 4.76 mm Size: 15 mm Special features Material: carbide Coating: CVD Grade: T9235 Double-sided chipbreaker Rhombic form, cylindrical hole Suitable for external and internal turning ISO-format, compatible with standard holders Recommended for interrupted cuts and less stable conditions FAQ What materials is this insert optimised for? The DNMG150412 T9235 insert is optimised for machining steel, particularly under interrupted or unstable cutting conditions where toughness and chip control are priorities. Can the insert be used for internal turning as well as external turning? Yes, the ISO-format geometry and rhombic profile make the insert suitable for both external and internal turning operations when paired with an appropriate holder or boring bar. How does the T9235 grade improve performance in unstable conditions? The T9235 carbide grade combines toughness and a wear-resistant CVD coating to withstand shock loads and reduce flank wear, providing longer tool life in interrupted cuts. What should be considered when choosing a compatible holder? Compatibility depends on the insert form, clearance angle (0°), tolerance class, attachment method, size and thickness (4.76 mm); selecting a holder that matches these parameters minimises runout and secures correct clamping. Is the chip control suitable for finishing passes? The double-sided chipbreaker and 1.2 mm edge radius offer controlled swarf evacuation and a stable cutting edge, making the insert effective for roughing and semi-finishing; final finishing may require a finer nose radius and specific geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9235 Wendeplatten - Tungaloy
Benefit from the durable CVD‑coated carbide grade T9235 combined with the ISO DNMG150412 geometry featuring a 55° cutting angle and 1.2 mm corner radius for stable, productive turning of steel under interrupted conditions; order directly via Metav Werkzeuge or ask our consultants for application guidance. DNMG150412 T9235 ISO turning insert (DNMG, 55°) for steel – Tungaloy The DNMG150412 T9235 is an ISO‑standard rhombic turning insert designed for external and internal turning of steel, optimised for interrupted cuts and applications with limited rigidity. CVD‑coated carbide for increased tool life 55° rhombic geometry for versatile turning 1.2 mm corner radius for robust engagement Double‑sided chipbreaker for interrupted cuts Stable metal removal where rigidity is limited The CVD‑coated carbide grade T9235 offers a tough, wear‑resistant cutting edge that is particularly suitable for machining steel at reduced cutting speeds and in conditions where clamping or tool stability is limited. The composition and coating are chosen to resist chipping during interrupted cuts, which reduces unplanned downtime and leads to a more consistent cycle time. Explaining the term: a CVD coating is a chemical vapour deposition layer that enhances wear resistance without excessively increasing brittleness, so the insert balances durability with edge strength. Geometry and edge form that improve process reliability The rhombic DNMG form with a 55° approach angle and a 1.2 mm corner radius provides a compromise between strength and versatility: the angle supports axial and radial engagement while the corner radius reinforces the cutting edge against impact. The insert is double‑sided and equipped with a double‑sided chipbreaker, enabling two indexed cutting edges and consistent chip control in steels with variable machinability. The central cylindrical hole and the 4.76 mm plate thickness ensure repeatable clamping and positional accuracy when used with compatible DNMG holders. System compatibility and measurable economic benefit As an ISO‑standard insert, compatibility with holders is governed by form, clearance angle, tolerance class, fastening method, size and thickness; this simplifies stocking and reduces set‑up errors. The insert forms part of a system that includes holder, shim or clamping kit and replacement screws, so teams can plan spare parts and avoid production interruptions. Economically, the combination of a tough grade and reliable chip control often results in longer effective tool life and fewer insert changes, which translates into lower tooling costs per component and improved overall process efficiency. For application advice on Tungaloy turning inserts or to request the genuine DNMG150412 T9235 via Metav Werkzeuge, contact Metav Werkzeuge for tailored recommendations and ordering assistance (info@metav-werkzeuge.com / +49 2822 7131930) Technical Data Article number: 6785905 Manufacturer SKU: TUN6785905 SKU: 6785905-Tungaloy Brand: Tungaloy Facts Cutting angle: 55° Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 15 mm Tolerance/ISO code: 150412 Special features CVD‑coated carbide (T9235) ISO turning insert, rhombic DNMG form Double‑sided chipbreaker Cylindrical hole for secure clamping Designed for steel, interrupted cuts, unstable conditions Compatible with standard DNMG holders System components: insert, holder, shim/clamping set, spare screws FAQ What materials is this insert best suited for? The DNMG150412 T9235 insert is formulated primarily for machining steel; the T9235 grade is designed to perform well at lower cutting speeds and under interrupted cutting conditions. How does the chipbreaker affect performance? The double‑sided chipbreaker on this insert improves chip control during interrupted cuts and variable material flow, which helps maintain surface finish and reduces the risk of chip interference. Can the insert be used for internal and external turning? Yes, the rhombic DNMG geometry with a 55° approach angle is suitable for both external and internal turning when paired with the appropriate DNMG holder and stable set‑up. What determines compatibility with a specific tool holder? Compatibility is determined by the insert form, clearance angle (0° in this case), tolerance class, fastening method, size and thickness; ensure the holder matches these ISO parameters for secure clamping. How many cutting edges are available per insert? This double‑sided DNMG insert provides multiple indexed edges; indexing restores a fresh cutting edge without needing to remove the insert from its holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150412 T9235 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide grade T9235, precise DNMG150412 geometry and a 55° lead angle for robust turning under interrupted conditions; order directly via Metav Werkzeuge or consult our specialists for application advice. DNMG 150412 T9235 indexable turning insert by Tungaloy — CVD-coated carbide, rhombic 55° geometry DNMG150412 T9235 is a rhombic indexable insert designed for external and internal turning operations where stability and chip control matter CVD-coated carbide grade T9235 Rhombic DNMG geometry, 55° lead angle Double-sided chipbreaker, cylindrical hole for clamping Suited for interrupted cuts and unstable conditions Precision and compatibility for dependable turning results The DNMG150412 geometry combines a 55° lead angle with a 0° clearance to offer predictable contact conditions and repeatable seating in compatible toolholders. As an ISO-standard indexable turning insert, it is compatible where form, clearance angle, tolerance class, fastening method, size and thickness match the holder specification. This predictability reduces setup time and allows planning of toolpaths and feeds around a known contact geometry, which supports consistent production output. Durable CVD-coated carbide for steel turning under stress The carbides in grade T9235 are CVD-coated and formulated for toughness rather than extreme cutting speed; they resist chipping during interrupted cuts and perform well in less rigid setups. This means the cutting edge retains integrity when encountering varying cross-sections or built-in interruptions. By prioritising edge robustness, the insert extends effective tool life in demanding steel applications and reduces unscheduled tool changes, contributing to a steadier machining cycle. Improved chip control and secure clamping minimise rework The double-sided chipbreaker and rhombic profile promote controlled chip formation and evacuation on both cutting edges, helping to avoid snaring or irregular chip shapes that can damage components or interfere with automation. The cylindrical hole and corresponding fastening method ensure a stable seat and accurate repeatability when indexing the second cutting edge. Together, these features reduce the risk of redeployment errors and support cleaner finishing passes with fewer manual interventions. Application guidance: choose the right setup for best economy Select a matching external holder or boring bar and the correct insert grade for the workpiece and machining stability. For roughing with interrupted sections, the T9235 grade is recommended at moderate cutting speeds with conservative feeds to exploit its toughness. For finishing, consider the holder rigidity and balance feed and speed to maintain surface quality without compromising edge life. The system approach — insert, holder, shim and clamping screw — is key to repeatable performance and lower per-part machining costs. Contact Metav Werkzeuge for tailored advice on using Tungaloy DNMG150412 T9235 inserts and to discuss the optimal holder and machining parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6786040 Manufacturer SKU: TUN6786040 Our SKU: 6786040-Tungaloy Model series: ISO indexable turning inserts Facts Insert designation: DNMG150412 Grade / coating: T9235, CVD-coated carbide Corner radius: 1.2 mm Thickness: 4.76 mm Inscribed circle / size: 15 mm Lead angle: 55° Clearance angle: 0° Hole: cylindrical Special features Rhombic insert shape Double-sided chipbreaker With hole for secure clamping Suited application: Turning Material: Carbide FAQ What materials is this insert intended for? The DNMG150412 T9235 insert is intended primarily for steel machining; the T9235 grade is a tough CVD-coated carbide formulated for steel and for conditions with interrupted cuts. Can this insert be used for both external and internal turning? Yes, the rhombic DNMG150412 geometry suits both external and internal turning when paired with the appropriate holder and correct clamping components. How does the double-sided chipbreaker help in production? The double-sided chipbreaker on the insert promotes consistent chip formation on both edges, improving evacuation and reducing the likelihood of chip-induced surface defects during turning. What should be considered when mounting the insert? Use a holder that matches the DNMG form, 55° lead angle and the tolerance class for secure seating; the cylindrical hole and clamping system ensure accurate repeatability when indexing the second cutting edge. Is the T9235 grade suitable for unstable machining conditions? Yes, T9235 is a tough CVD-coated carbide grade selected for lower cutting speeds in unstable setups and for resistence against edge chipping during interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9235 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade T9235 insert with a rhombic DNMG profile and a 55° approach angle to improve chip control and tool life in unstable turning conditions; order the insert directly via Metav Werkzeuge or ask our consultants for application-specific advice. DNMG 150412 T9235 — Indexable Turning Insert for Drehen by Tungaloy A DNMG150412 T9235 indexable turning insert designed for general external and internal turning applications, featuring a rhombic shape and CVD-coated carbide for reliable performance in interrupted cuts and unstable setups ISO rhombic geometry for universal turning CVD-coated carbide grade T9235 Double-sided chipbreaker, with cylindrical hole 1.2 mm corner radius for versatile finishes High-performance coating and material for consistent metal removal The combination of CVD-coated carbide and the T9235 grade delivers a balance of toughness and wear resistance that suits low cutting speeds and interrupted cutting conditions commonly encountered in production turning. The coating process deposits hard layers that reduce flank wear and improve edge life, while the substrate maintains fracture resistance; this results in longer tool life and fewer index changes, increasing uptime and reducing tooling costs. Geometry and mounting designed for predictable results The rhombic insert geometry with a 55° approach angle and 0° relief angle provides a stable cutting line and good access in both external and internal turning. The double-sided chipbreaker supports effective chip control for a range of steels, while the cylindrical centre hole secures reliable clamping in compatible holders. Compatibility with toolholders depends on form, relief angle, tolerance class, clamping method, size and thickness, which ensures a precise fit and repeatable performance when the correct matching holder is chosen. Practical applications and selection guidance for machining steel Intended primarily for turning steel under less-than-ideal rigidity, the insert performs well where interrupted cuts or variable fixturing occur. The 1.2 mm corner radius offers a compromise between strength and finish quality, suitable for light to medium finishing passes. For differing workpiece materials or surface requirements, selecting an appropriate chipbreaker and confirming holder compatibility will yield the best balance of productivity and component quality. For production environments that prioritise reliability, request Tungaloy DNMG150412 inserts with grade T9235 from Metav Werkzeuge or consult our team to select the ideal chipbreaker and holder combination for the application. Technical Data Article number: 6785832 Manufacturer SKU: TUN6785832 SKU: 6785832-Tungaloy Designation: DNMG150412 Series: ISO-indexable turning inserts Material: carbide Facts Insert size: 15 mm Thickness: 4.76 mm Corner radius: 1.2 mm Approach angle: 55° Relief angle: 0° Hole: with hole (cylindrical) Special features Grade/coating: T9235, CVD-coated carbide Shape: rhombic Chipbreaker: double-sided Application: turning (external and internal) Compatibility: determined by form, relief angle, tolerance class, clamping, size and thickness Typical use: steel, interrupted cuts, unstable conditions FAQ Which materials is this insert best suited for? The DNMG150412 T9235 insert is specified for machining steel; the T9235 grade provides toughness suited to interrupted cuts and less rigid setups. Is the insert single-side or reversible? This indexable insert is double-sided, offering two usable cutting edges per side and the ability to rotate or flip the plate to extend service life. How is holder compatibility determined? Compatibility depends on the insert form, relief angle, tolerance class, clamping method, size and thickness; matching those parameters ensures secure mounting and repeatable cutting with the DNMG150412 plate. What cutting tasks is this insert recommended for? Designed for general turning, the insert is suitable for external and internal turning operations, especially where interrupted cuts or unstable conditions occur and a tough, wear-resistant grade is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 150412 T9235 Wendeplatten - Tungaloy
Take advantage of a tough, CVD-coated carbide grade designed for steel under unstable or interrupted cutting; the double-sided chipbreaker and ISO form ensure consistent chip control and long tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150412 T9235 Tungaloy turning insert — CVD-coated carbide, rhombic ISO form A DNMG150412 T9235 is an ISO rhombic turning insert intended for external and internal turning of steel, offering a tough grade for lower cutting speeds and interrupted or unstable cutting conditions. CVD-coated carbide for improved tool life Suitable for steel, unstable and interrupted cuts Rhombic ISO form DNMG with 55° cutting angle Double-sided chipbreaker with cylindrical hole Consistent performance when conditions are unstable The CVD-coated carbide grade T9235 is formulated for toughness rather than top-end cutting speed, which makes it well suited where interrupted cuts or variable clamping reduce process stability. The CVD layer increases surface hardness and wear resistance, supporting a more predictable abrasion pattern and stable chip formation. For shops where economic uptime and fewer insert changes matter, this combination reduces downtime and contributes to improved overall machining efficiency. Simple compatibility and secure clamping for reliable results Produced to the ISO DNMG geometry, the insert’s rhombic shape and 55° cutting angle mean compatibility with a wide range of external holders and boring bars. Key dimensions support correct seating and clamping: 4.76 mm plate thickness, 15 mm inscribed size and a corner radius of 1.2 mm. The insert is double-sided and supplied with a cylindrical hole, permitting indexed use and straightforward fixation. Matching holder form, relief angle, tolerance class, fastening style, size and thickness ensures repeatable results. Practical guidance for selection and cost efficiency Intended primarily for turning of steel, this grade performs best at moderated cutting speeds where chip control is critical. Select the double-sided chipbreaker and an appropriate grade to suit material, feed and stability; the tougher substrate tolerates interrupted engagement and vibration better than high-speed, wear-optimised grades. The result is longer in-cycle life, fewer indexings and lower tooling consumption—real advantages for batch production and mixed-series machining. For customers less familiar with coatings: CVD (chemical vapour deposition) applies a thin, adherent hard layer that enhances wear resistance without compromising the insert core’s toughness. Contact Metav Werkzeuge for tailored recommendations on Tungaloy turning inserts and to confirm holder compatibility; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6786016 SKU: 6786016-Tungaloy Manufacturer SKU: TUN6786016 Material: Carbide Series: ISO turning inserts Grade: T9235 Insert designation: DNMG150412 Shape: Rhombic Edge radius: 1.2 mm Plate thickness: 4.76 mm Size: 15 mm Cutting angle: 55° Relief angle: 0° Hole: with cylindrical hole Chipbreaker: Double-sided Application: Turning (external and internal) Typical use: Steel, unstable conditions, interrupted cuts Dimensions / measurable data Corner radius: 1.2 mm Plate thickness: 4.76 mm Inscribed size: 15 mm Cutting angle: 55° Relief angle: 0° Designs / special features CVD-coated carbide Rhombic ISO DNMG form Double-sided chipbreaker Cylindrical hole for fastening Compatible with suitable external holders and boring bars Intended for steel machining and interrupted cuts FAQ What materials is this insert designed for? The DNMG150412 T9235 insert is optimised for steel machining, especially under unstable or interrupted cutting conditions where the tougher CVD-coated grade maintains performance. Is the insert reversible and does it have a hole for fixing? Yes, the turning insert is double-sided and supplied with a cylindrical hole, allowing indexing and secure clamping in compatible holders. What are the key dimensions to check for holder compatibility? Check the 15 mm inscribed size, 4.76 mm plate thickness, 1.2 mm corner radius and the 55° cutting angle to ensure correct seating and clamp fit for this ISO DNMG insert. How does the T9235 grade influence cutting strategy? T9235 is a tougher, CVD-coated grade intended for lower cutting speeds and interrupted cuts; using moderated speeds and ensuring good clamping improves tool life and chip control with this grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 TH10 Wendeplatten - Tungaloy
Take advantage of the sharp TH10 uncoated carbide and DNMG geometry to reduce cutting forces while achieving clean surface finishes; the double-sided chipbreaker and cylindrical hole ensure quick indexing and secure clamping. Order via Metav Werkzeuge or consult our team for application matching. DNMG 150412 TH10 Indexable insert for turning — Tungaloy DNMG150412 TH10 ISO-standard rhombic insert designed for external and internal turning with a 55° geometry, double-sided chipbreaker and cylindrical locating hole. DNMG 55° geometry for versatile turning Uncoated carbide TH10 for low cutting forces Double-sided chipbreaker for controlled chips Cylindrical hole compatible with standard clamps Efficient turning with an uncoated TH10 grade The DNMG150412 TH10 insert combines a sharp, uncoated carbide cutting edge with a geometry optimised for general turning tasks. The TH10 grade is designed as a universal, sharp grade that promotes low cutting forces and clean surface results on non-ferrous materials and conditions where an uncoated edge is beneficial. This leads to reduced spindle load, consistent part quality and easier finishing, particularly in operations where cutting force and build-up on the edge must be minimised. Secure clamping and ISO compatibility for production reliability Compatibility with a lathe holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the insert is produced to ISO standards and therefore integrates with many standard external holders and boring bars. The rhombic 55° profile, 15 mm inscribed circle and 4.76 mm plate thickness combine with a cylindrical hole and a 0° relief angle to ensure repeatable seating and reliable clamping. These attributes help maintain concentricity and repeatability on the shop floor, reducing setup time and scrap rates. Process advantages: chip control, indexing and application scope The double-sided chipbreaker design allows two cutting edges per insert, halving tooling costs per edge change and shortening downtime for indexable tooling. The corner radius of 1.2 mm provides a balance between tool strength and surface finish, suitable for medium to finishing cuts. Select the appropriate chipbreaker and the TH10 grade depending on workpiece material and machining stability; this insert is particularly effective for turning tasks that prioritise low force, clean surfaces and reliable edge behaviour. For tailored advice on Tungaloy indexable inserts, contact Metav Werkzeuge for compatibility checks and fast supply — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6803453 SKU: 6803453-Tungaloy Manufacturer SKU: TUN6803453 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications Inscribed circle: 15 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Geometry angle: 55° Clearance angle: 0° ISO designation: 150412 Materials & special features Material: carbide (cemented carbide) Grade: TH10 (uncoated) Plate shape: rhombic Chipbreaker: double-sided Hole: with cylindrical hole Application: external and internal turning ISO-standard indexable insert FAQ What materials is this insert best suited for? The DNMG150412 TH10 insert by Tungaloy is optimised for non-ferrous materials and applications where an uncoated edge gives lower cutting forces and cleaner surfaces. How does the double-sided chipbreaker help production? A double-sided chipbreaker provides two usable edges per insert, improving cost efficiency and reducing downtime for edge changes when using the DNMG150412 TH10 insert. Which size and thickness does the insert have? The insert has a 15 mm inscribed circle and a plate thickness of 4.76 mm, designed to fit standard ISO DNMG holders specified for 150412 geometry. What does the 55° geometry mean in practice? A 55° rhombic angle offers versatile approach angles for both external and internal turning, giving good access in confined features while maintaining cutting stability. Is this an ISO-standard product and how does that affect holder choice? Yes — the insert follows ISO designation 150412, so holder compatibility depends on matching form, clearance angle, tolerance and fastening; this ensures broad compatibility with standard external holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH120 carbide, a sharp 55° rhombic geometry, and a 1.6 mm corner radius for stable, wear-resistant turning. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150416 AH120 – ISO turning insert, 55° rhombic, Tungaloy DNMG150416 AH120 is an ISO‑standard indexable insert designed for external and internal turning, delivering process reliability where a sharp cutting edge and wear resistance are required. PVD-coated carbide AH120 for wear resistance Sharp cutting edge for stable process security ISO DNMG 150416 form, 55° cutting geometry Double-sided insert with 1.6 mm corner radius Stable cutting performance through wear‑resistant grade and coating The AH120 grade is a PVD-coated carbide engineered for combined wear and chipping resistance during turning. The coating reduces flank wear and preserves a sharp cutting edge, which results in predictable tool life and fewer interruptions for tool changes. For production environments that prioritise steady throughput, this combination offers measurable advantages: less frequent index changes and more consistent cycle times. The term PVD denotes a physical vapour deposition layer applied to the substrate to increase hardness and thermal stability at the cutting edge. Reliable setup and ISO compatibility for quick tool integration The ISO DNMG 150416 designation signals a standardised rhombic insert shape with a 55° cutting geometry that fits a wide range of external holder systems. Compatibility with a toolholder depends on form, free angle, tolerance class, fastening method, size and thickness; the ISO standard simplifies selection and reduces setup errors. The insert’s cylindrical hole and standard dimensions allow straightforward clamping and repeatable positioning, supporting quick changeovers and consistent tool orientation in serial machining. Balanced surface finish and mechanical security with 1.6 mm radius A 1.6 mm corner radius provides a compromise between edge strength and surface finish: it resists edge chipping under interrupted cuts while still enabling acceptable surface quality in general turning tasks. The double-sided chipbreaker design helps control chip form and evacuation, which lowers the risk of built-up edge and improves machining stability. For workplaces focused on repeatable part quality, these characteristics translate into fewer reworks and more predictable finishing passes. For robust, process-secure turning choose the Tungaloy DNMG150416 AH120 insert and contact Metav Werkzeuge for application support and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6760662 SKU: 6760662-Tungaloy Manufacturer SKU: TUN6760662 Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten Core data Shape/size: DNMG 150416 Cutting angle: 55° Corner radius: 1.6 mm Thickness: 4.76 mm Inscribed circle/size: 15 mm Free angle: 0° Special features PVD coating Carbide substrate Grade: AH120 (wear- and chipping‑resistant) Double-sided chipbreaker Rhombic plate form Cylindrical hole (with hole) Suitable for external and internal turning FAQ What coating and grade does this insert use? The DNMG150416 AH120 Tungaloy insert is a PVD‑coated carbide in grade AH120, designed for increased wear and chipping resistance during turning operations. How does the chipbreaker affect machining? The double-sided chipbreaker on the DNMG150416 AH120 insert shapes chips to aid evacuation and reduce built‑up edge, improving stability and surface consistency in serial turning applications. Will this insert fit existing holders? Compatibility is defined by ISO form, free angle, tolerance class, fastening, size and thickness; the ISO DNMG 150416 designation ensures a standardised geometry that fits corresponding DNMG holders when size and clamping match. What does a 1.6 mm corner radius mean for finish and strength? A 1.6 mm corner radius provides greater edge strength for interrupted or heavier cuts while still producing acceptable surface finishes in general turning—suitable for balanced productivity and part quality. How many times can the insert be indexed? The double-sided design provides multiple indexable edges; actual usable edges depend on application, wear and correct indexing practice with the DNMG150416 AH120 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade that combines a sharp, stable cutting edge with ISO compatibility for predictable turning results; this balance supports reliable surface quality and extended tool life. Order the inserts directly via Metav Werkzeuge or consult the specialists for application advice. DNMG 150416 AH6225 Tungaloy turning insert — PVD‑coated carbide, 55° rhombic DNMG 150416 AH6225 is an ISO rhombic turning insert designed for general‑purpose external and internal turning in industrial machining. PVD-coated carbide grade AH6225 Sharp, stable cutting edge for medium cuts Rhombic 55° geometry, 1.6 mm corner radius Compatible with ISO turning toolholders Consistent cutting performance for medium turning operations The PVD‑coated AH6225 grade is engineered to deliver a sharp yet stable cutting edge, optimised for medium machining conditions. This combination reduces edge chipping while maintaining a fine finish, which translates into fewer tool changes and more consistent part quality. The coating improves wear resistance under varied thermal loads, so the insert maintains cutting performance across interrupted cuts and variable feed conditions. Benefit: enhanced process stability and longer effective tool life. Simple integration with ISO toolholding systems The insert uses the ISO designation DNMG150416 and a rhombic plate form with a cylindrical hole, enabling integration into standard ISO external holders and boring bars. With a plate size of 15 mm and a plate thickness of 4.76 mm, the geometry and tolerances support predictable clamping and repeatable positioning. The 55° included angle and 0° clearance angle produce stable cutting forces in typical turning set-ups. Benefit: straightforward retrofitting into existing tool systems and reliable mechanical location. Optimised for machining rostfreier Stahl with controlled chip formation Designed as a universal grade for rostfreier Stahl, the cutting material and double‑sided chipbreaker offer balanced chip control and surface integrity. The 1.6 mm corner radius provides favourable strength at the cutting edge while permitting good workpiece finish on medium cuts. Because the insert is reversible, both cutting edges can be used, improving economy per part produced. Benefit: improved surface quality and economical use of cutting edges in stainless applications. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning solutions and to arrange fast delivery of DNMG150416 AH6225 inserts via their sales team at Metav Werkzeuge. Technical Data Article number: 6903192 SKU: 6903192-Tungaloy Manufacturer SKU: TUN6903192 Brand: Tungaloy Numbers / Core technical data Corner radius: 1.6 mm Insert size: 15 mm Plate thickness: 4.76 mm Included angle: 55° Clearance (relief) angle: 0° Designs / Special features Carbide substrate PVD coating, grade AH6225 ISO designation DNMG150416 Rhombic plate form with cylindrical hole Double-sided chipbreaker Application: turning (external and internal) Compatible with ISO turning holders FAQ What materials is this insert suitable for? The DNMG150416 AH6225 insert is intended primarily for machining rostfreier Stahl and offers balanced wear resistance and edge stability for that material group. How does the AH6225 grade affect tool life? The PVD‑coated AH6225 grade increases wear resistance under changing thermal conditions, which typically extends the usable life of the cutting edge compared with uncoated grades. Can the insert be used on both external and internal turning operations? Yes, the rhombic DNMG150416 geometry and cylindrical hole make the insert suitable for both external facing and internal turning when paired with the appropriate ISO holder or boring bar. What is the benefit of the 1.6 mm corner radius? A 1.6 mm corner radius reinforces the cutting edge against mechanical shock while still enabling a good surface finish in medium cutting conditions. Is the insert reversible and how does that influence cost efficiency? The insert is double‑sided, allowing two cutting edges per index; this reversibility improves economy by maximising edge usage before disposal. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade engineered for reliable performance in stainless steels and a 55° rhombic geometry that ensures stable cutting behaviour; order compatible inserts or discuss holder selection with Metav Werkzeuge for efficient process integration. DNMG150416 AH6225 Tungaloy indexable turning insert — PVD‑coated carbide for turning The DNMG150416 AH6225 is an ISO‑standard indexable turning insert intended for external and internal turning applications, optimised for stainless steels and variable machining conditions. PVD‑coated carbide for stainless steels ISO‑compliant 55° rhombic geometry 1.6 mm corner radius, robust cutting edge Double‑sided chipbreaker with cylindrical hole Higher productivity on stainless steels through consistent cutting behaviour The AH6225 grade combines a PVD‑coated carbide substrate with a geometry tuned for turning of stainless steels, producing a stable cutting edge under changing conditions. The rhombic 55° form promotes predictable chip flow and access in both external and internal operations, while the double‑sided chipbreaker aids chip control in interrupted cuts. Explaining the benefit: PVD coating increases surface hardness and reduces built‑up edge formation, which leads to longer effective tool life and fewer tool changes during production. The design therefore supports improved cycle times and consistent surface finish quality. Clear compatibility rules for holders and reduced setup risk Compatibility depends on insert shape, clearance angle, tolerance class, fastening and thickness; the ISO designation guarantees a standardised fit for matching toolholders and boring bars. The ISO‑standard marking simplifies procurement and reduces the risk of mismatch in automated setups. The cylindrical hole and central fixing accommodate many standard clamping systems; the 0° clearance angle and rhombic profile should be checked against the chosen toolholder to ensure correct rake and lead. This clarity shortens setup time and decreases the chance of rework due to incorrect seating. Predictable edge life and easier process planning With a 1.6 mm corner radius, the insert provides a compromise between edge strength and form fidelity, helping to resist chipping while maintaining acceptable dimensional control. The universal grade is designed for moderate cutting speeds and variable conditions, delivering high process security and repeatable results across batches. For process planners, the combination of geometry and material means a more predictable maintenance schedule and fewer unexpected interruptions. The robust edge and coating together contribute to consistent results and a favourable cost‑to‑performance ratio. For enquiries regarding holder compatibility, batch availability or to order the DNMG150416 AH6225 from Tungaloy, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid supply coordination Technical Data Article number: 6825699 Manufacturer SKU: TUN6825699 Model series: ISO‑Drehwendeschneidplatten Facts Geometry angle: 55° Corner radius: 1.6 mm ISO code: 150416 Insert size: 15 mm Clearance angle: 0° Special features Material: carbide Coating: PVD Shape: rhombic Hole: with cylindrical hole Chipbreaker: double‑sided Application: turning, external and internal Grade suitability: stainless steels FAQ What materials is this insert best suited for? The DNMG150416 AH6225 insert from Tungaloy is formulated primarily for stainless steels, offering a balance of a sharp, stable cutting edge and wear resistance for moderate turning operations. Which holder types are compatible with this ISO insert? Compatibility is determined by insert shape, size and tolerance; the ISO‑standard DNMG150416 fits standard 55° rhombic turning holders and many internal boring bars when the cylindrical hole and clamping method match the toolholder. How does the PVD coating affect performance? The PVD‑coated carbide surface reduces adhesion and improves thermal resistance, which diminishes built‑up edge on stainless steels and extends effective edge life for the DNMG150416 AH6225. Is the insert double‑sided and indexable? Yes, the DNMG150416 is double‑sided with a central cylindrical hole and is indexable, permitting rotation to a fresh cutting edge to maximise productivity and economy. What cutting edge strength can be expected with a 1.6 mm radius? A 1.6 mm corner radius offers enhanced edge stability against chipping while maintaining dimensional control, suitable for operations where a compromise between strength and form accuracy is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a sharp yet stable cutting edge and ISO compatibility for consistent turning results; the PVD-coated carbide grade AH6225 offers reliable performance on stainless steels, while the rhombic, double-sided design keeps tooling costs down through easy indexing. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DNMG150416 AH6225 Tungaloy indexable insert — ISO DNMG 150416, PVD-coated carbide for turning DNMG150416 AH6225 Tungaloy is an ISO‑standard indexable insert for external and internal turning, engineered for medium machining of stainless steels and variable workshop conditions ISO DNMG 150416 geometry for stable turning PVD-coated carbide grade AH6225 for stainless steels 1.6 mm corner radius for medium roughing and finishing Rhombic insert with cylindrical hole, double-sided chipbreaker Long-lasting, efficient cutting for mixed turning tasks The combination of a PVD-coated surface and a carbide substrate provides a balance between wear resistance and edge sharpness that supports consistent cycle times. As a member of the ISO DNMG150416 family, this indexable insert is intended for medium cutting depths and varying feed rates; the AH6225 grade is tuned for reliable performance when machining stainless steels. The protective coating reduces flank wear in interrupted cuts and at elevated temperatures, which often translates into fewer insert changes and lower total tooling costs per component. For production planners, this means predictable tool life and stable part quality in mixed-batch environments. Secure mounting and straightforward compatibility with holders Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening and the insert’s size and thickness. The insert is specified with a thickness of 4.76 mm and a nominal size of 15, with a 0° clearance angle and a 55° included angle, so matching the holder seat and clamp is crucial for repeatable accuracy. The central cylindrical hole and standard rhombic form allow quick indexing on most DNMG-compatible external holders; choosing a holder that matches the insert’s tolerance class ensures correct clamping force and minimises vibration. For workshop staff unfamiliar with insert‑to‑holder matching, check the holder data sheet for seat geometry and tolerance to ensure correct fit. Improved edge stability and chip control for stainless steel machining The 1.6 mm corner radius and integrated double-sided chipbreaker are selected to balance strength and finish: the radius supports edge robustness during medium turning passes, while the chipbreaker helps create controllable, segmented chips in ductile stainless steels, reducing the risk of entangling swarf. The rhombic shape provides two effective cutting edges on each side, allowing economical indexing and prompt return to dimensionally consistent cuts. In practice, this configuration helps maintain surface quality and reduces the incidence of built-up edge, so parts leave the machine within tolerance more often and post‑process rework is minimised. Contact Metav Werkzeuge for tailored cutting strategies or to discuss batch requirements for Tungaloy inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947268 Manufacturer SKU: TUN6947268 SKU: 6947268-Tungaloy Model series: ISO indexable turning inserts Material: Carbide (PVD-coated) Facts Thickness: 4.76 mm Size: 15 Corner radius: 1.6 mm Clearance angle: 0° Included angle: 55° Manufacturer article number: 6947268 Application: Turning Special features Grade: AH6225 Coating: PVD Shape: Rhombic Hole: with cylindrical hole Chipbreaker: double-sided Two cutting edges per side, indexable Compatibility depends on form, freedom angle, tolerance, fastening, size and thickness Suitable for stainless steels FAQ Which materials are best suited to this insert? The DNMG150416 AH6225 Tungaloy indexable insert is optimised for machining stainless steels, offering a coating and grade combination that reduces built‑up edge and extends usable life in such materials. How does the AH6225 grade affect machining results? The AH6225 grade balances a sharp cutting edge with edge stability, improving surface finish and lowering the frequency of insert changes during medium turning operations. What should be checked when fitting the insert to a holder? Ensure the holder’s seat geometry matches the insert’s shape and 0° clearance angle, verify the clamp or screw fits the cylindrical hole, and confirm tolerance class compatibility to maintain clamping stability. How many indexable edges are available per insert? This rhombic, double‑sided insert provides two usable edges per side, allowing multiple repositions before replacement and helping to reduce tooling costs. Is this insert suitable for internal as well as external turning? Yes, the ISO DNMG geometry and AH6225 grade make the insert suitable for both external and internal turning applications, provided the holder and cutting parameters are appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD‑coated carbide grade and the 55° rhombic form for reliable stainless steel turning, with a stable cutting edge and easy indexing; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. DNMG150416 AH6225 Tungaloy turning insert — PVD‑coated carbide, 55° rhombic A DNMG150416 AH6225 insert for turning, designed as an ISO‑standard rhombic insert for stainless steel machining and medium‑duty operations PVD‑coated carbide for durable cutting Optimised for stainless steel machining 55° rhombic form with 1.6 mm radius Double‑sided chipbreaker, ISO‑compatible Higher productivity through a sharper, more stable cutting edge The PVD‑coated carbide grade AH6225 combines a fine, wear‑resistant coating with a substrate engineered for moderate cutting forces; this yields a sharp cutting edge that remains stable under variable conditions typical for stainless steel. The coating reduces built‑up edge and abrasion while the substrate controls flank wear, so chip formation stays predictable and cycle times remain consistent. For shops seeking process reliability, the result is fewer tool changes and more consistent component quality. Seamless integration into ISO turning systems As an ISO‑standard rhombic insert, the DNMG150416 format fits a wide range of external holders and boring bars when matched by form, free angle, tolerance class, fastening and thickness. The 0° clearance angle and cylindrical hole permit secure screw mounting and straightforward indexing; the double‑sided design offers economical re‑use of both edges. This compatibility simplifies inventory management and allows rapid replacement during production, keeping set‑up times minimal and throughput high. Practical handling and application advantages for daily machining The 15 mm inscribed size, 1.6 mm corner radius and 4.76 mm thickness provide a robust profile for medium‑duty turning where repeatable surface finish and tool life matter. The double‑sided chipbreaker supports controlled chip evacuation in stainless steels, reducing the risk of workpiece damage and improving operator safety. For workshops facing mixed batches, the universal nature of the grade reduces the need for multiple specialised inserts while delivering consistent results across changing conditions. For application guidance with Tungaloy inserts or to arrange supply via Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability Technical Data Article number: 6947219 Manufacturer SKU: TUN6947219 Supplier SKU: 6947219-Tungaloy Material: Carbide Model series: ISO turning inserts ISO designation: DNMG150416 Grade: AH6225 Numbers / Core Technical Data Corner radius: 1.6 mm Insert thickness: 4.76 mm Inscribed circle / size: 15 mm Approach angle: 55° Clearance angle: 0° Hole: with cylindrical hole Special features PVD‑coated carbide (AH6225) Double‑sided chipbreaker Rhombic 55° form ISO‑compatible indexable insert Suitable for stainless steel turning Compatible with standard holders (form, size, thickness determine fit) FAQ Which materials is this insert suited to? The DNMG150416 AH6225 Tungaloy turning insert is a universal grade optimised primarily for stainless steel; its PVD coating and substrate balance wear resistance and edge stability for common stainless machining tasks. What are the critical dimensions to check for holder compatibility? Check the inscribed circle/size (15 mm), insert thickness (4.76 mm), corner radius (1.6 mm) and the 55° approach angle; the cylindrical hole must match the clamping screw and seat of the chosen holder. Is the insert reversible and how is it mounted? The insert is double‑sided and indexable; mounting uses the cylindrical hole with a suitable screw and seat in ISO‑compatible holders, allowing the second cutting edge to be used after rotation. What does the AH6225 grade and PVD coating deliver in practice? AH6225 with a PVD layer provides improved resistance to adhesive wear and better control of chip formation on stainless steels, extending usable edge life and supporting consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com