DNMG 150416 AH6225 Wendeplatten - Tungaloy
Take advantage of a universal, PVD-coated AH6225 grade that balances a sharp cutting edge with stable performance for stainless steel turning; the DNMG 150416 geometry with a 1.6 mm corner radius and 55° cutting angle reduces setup complexity and inventory while maintaining consistent results. Order the insert directly via Metav Werkzeuge or consult the team for holder matching and process optimisation. DNMG 150416 AH6225 Turning Insert — PVD-coated carbide, 55° geometry — Tungaloy DNMG 150416 AH6225 is an ISO-format turning indexable insert designed for external and internal turning where consistent performance with stainless steels is required PVD-coated universal grade AH6225 Rhombic shape with cylindrical hole Double-sided chipbreaker for extended use 1.6 mm corner radius for robustness High-performance cutting for stainless steels with a universal grade The combination of a PVD-coated surface and a wear-resistant carbide substrate gives a reliable cutting edge suited to the demands of machining stainless steels. The AH6225 grade is engineered to deliver a balance between a sharp initial edge and sufficient toughness for varied operating conditions, meaning fewer insert changes in mixed production runs. This results in higher machine uptime and a predictable tool life under typical turning feeds and depths. ISO compatibility and secure clamping minimise setup risk The ISO-format geometry simplifies holder selection, but compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. The rhombic shape with a cylindrical hole enables secure fixation in standard DNMG-compatible holders; the included relief angle of 0° and the 55° main cutting angle ensure stable cutting kinematics. Selecting a matching clamping seat and screw avoids false fits and supports repeatable positioning for batch production. Operational efficiency and material-adapted chip control A double-sided chipbreaker and a 1.6 mm corner radius provide both chip control and edge strength for moderate turning operations. Double-sided use halves the number of inserts required per component series, reducing stock complexity and cost per part. The 55° geometry promotes favourable cutting forces on interrupted surfaces, while the robust edge form helps to withstand variations in stainless steel work-hardening tendency during continuous production. Contact Metav Werkzeuge to discuss holder compatibility and secure the DNMG 150416 AH6225 PVD-coated carbide insert for your next turning operation — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6947242 Manufacturer SKU: TUN6947242 Model series: ISO turning indexable inserts Manufacturer: Tungaloy ISO designation: DNMG150416 Facts Corner radius: 1.6 mm Thickness: 4.76 mm Inscribed circle / size: 15 mm Relief angle: 0° Cutting angle: 55° Hole: cylindrical Special features Material: PVD-coated carbide Grade: AH6225 (universal for stainless steels) Chipbreaker: double-sided Shape: rhombic Application: turning (external and internal) FAQ What materials is this insert suitable for? The DNMG 150416 AH6225 Tungaloy indexable insert is optimised for stainless steels and performs well in mixed batches where a universal PVD-coated grade is required. How does the chipbreaker influence machining? The double-sided chipbreaker built into the DNMG 150416 AH6225 insert promotes controlled chip formation and supports consistent surface finish when turning stainless steels with moderate cutting parameters. Can the insert be used on both internal and external turning operations? Yes, the ISO-format DNMG 150416 AH6225 turning insert is designed for external and internal turning when mounted in the appropriate DNMG-compatible holder. What should be considered when selecting a holder for this insert? Holder compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; use a holder that matches the DNMG 150416 geometry and ensures secure clamping of the Tungaloy insert. Is the insert reversible and how many cutting edges are available? The DNMG 150416 AH6225 indexable insert is double-sided, allowing rotation to a fresh edge and extending the number of usable cutting edges per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of stable cutting performance, optimised chip control and broad ISO compatibility for reliable turning operations; order the DNMG150416 AH6235 insert via Metav Werkzeuge or consult our specialists for application advice. DNMG150416 AH6235 DNMG indexable turning insert — PVD-coated carbide, 55° approach angle, by Tungaloy DNMG150416 AH6235 is a rhombic ISO indexable insert for external and internal turning, optimised for stainless steels and interrupted cuts in demanding production environments. PVD-coated carbide for enhanced toughness Optimised for stainless steels and interrupted cuts 55° approach angle with 1.6 mm corner radius Double-sided chipbreaker, rhombic plate, with hole High-performance cutting for stainless steel turning The PVD-coated carbide composition in the DNMG150416 AH6235 grade delivers a balance of toughness and wear resistance that suits machining of stainless steels and mixed batches. The PVD layer reduces adhesion and improves thermal stability, which leads to longer tool life and fewer indexings. For production-oriented turning, the combination of a medium corner radius and robust substrate enables consistent metal removal rates and predictable edge behaviour under varying feeds and depths of cut. Consistent fit and secure clamping for ISO systems The insert is manufactured to fit ISO indexable inserts standards, so compatibility with ISO holders is determined by form, relief angle, tolerance class, attachment and plate thickness. The rhombic plate form with a cylindrical hole ensures reliable seating and repeatable datum positioning in standard external holders or boring bars. This mechanical consistency supports process stability, reduces setup time and simplifies tool inventory management across different machines. Optimised chip control for interrupted cuts and difficult surfaces A double-sided chipbreaker design focuses on controllable chip formation in mixed and interrupted machining. The feature reduces the risk of built-up edge and sporadic chip jamming, which is particularly valuable when turning parts with interrupted profiles or non-uniform material transitions. Improved chip evacuation supports better surface finish and reduces secondary handling, contributing to higher throughput and lower scrap rates. Coating, grade and economical productivity The AH6235 grade combines a tougher substrate with PVD coating to resist chipping and thermal softening in severe cutting conditions. The 55° approach angle and 1.6 mm corner radius are balanced for edge strength and dimensional accuracy, enabling quieter cutting and predictable wear progression. In practice, this results in fewer insert changes and a lower cost per component when compared with less optimised grades, while maintaining the surface quality required for downstream operations. Contact Metav Werkzeuge for tailored application advice or to request availability and batch pricing for the DNMG150416 AH6235 insert; eMail info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical data Article number: 6886290-Tungaloy Manufacturer SKU: TUN6886290 Manufacturer article number: 6886290 Model series: ISO turning indexable inserts Material: carbide Core technical figures Approach angle: 55° Corner radius: 1.6 mm ISO designation: 150416 Plate size: 15 Free angle (rake): 0° Hole: with cylindrical hole Design & features Rhombic plate form Double-sided chipbreaker PVD-coated carbide grade AH6235 Suitable for stainless steels and interrupted cuts Compatible with ISO holders and standard clamping systems Reversible, double-sided cutting edges FAQ What materials is this insert suitable for? The DNMG150416 AH6235 insert is formulated for stainless steels, offering improved resistance to workpiece adhesion and thermal loads common in such materials. Is the insert reversible, and how many edges are available? The insert is double-sided, providing reversible edges that extend the effective tool life before regrinding or disposal. How does the chipbreaker affect interrupted machining? The double-sided chipbreaker promotes controlled chip formation and evacuation, reducing the risk of chipping and improving surface integrity during interrupted cuts. Which holder types are compatible with this insert? Compatibility follows ISO standards for rhombic inserts: holders that match form, approach angle, tolerance class, attachment and plate thickness will provide secure seating for the DNMG150416 AH6235. What is the significance of the 55° approach angle? A 55° approach angle balances radial and axial forces to improve edge strength and accuracy, making it suitable for a range of turning operations where dimensional control is important. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated cemented carbide grade optimised for stainless steels and a robust 55° rhombic geometry to maintain process reliability and minimise insert changes; order the DNMG150416 AH6235 Tungaloy indexable insert directly via Metav Werkzeuge or consult the team for selection support. DNMG150416 AH6235 Tungaloy indexable insert for turning — PVD-coated cemented carbide, 55° rhombic The DNMG150416 AH6235 Tungaloy is an ISO-standard rhombic indexable insert designed for external and internal turning, developed for stainless steels and interrupted cuts. PVD-coated cemented carbide AH6235 Suitable for stainless steels and interrupted cuts ISO DNMG 150416 rhombic 55° insert Double-sided chipbreaker, cylindrical hole Corner radius 1.6 mm, 4.76 mm thickness Engineered for reliable turning of stainless steels The insert uses a PVD-coated cemented carbide grade AH6235, selected for a tougher cutting-edge performance where stainless steels tend to work-harden and cause edge chipping. The PVD coating enhances adhesion resistance and heat protection, which translates into a more consistent tool life under the stresses of interrupted cuts. Specified as ISO DNMG150416, the geometry offers a balanced approach between strength and accessibility on external profiles, helping to keep machining cycles predictable and downtimes low. Predictable chip control and fewer interruptions With a double-sided chipbreaker and a carefully matched geometry, the insert improves chip formation and evacuation. A chipbreaker shapes and breaks the chips into manageable segments, reducing the risk of entanglement and tool damage; this is especially important when machining stainless steels or working with variable fixtures. The insert’s corner radius 1.6 mm helps absorb cutting forces and delivers steadier cutting conditions, resulting in improved surface finish and fewer unexpected tool changes during production runs. Straightforward integration into existing toolholders The DNMG format conforms to ISO standards, which simplifies compatibility checks: form, relief angle and size determine fit rather than manufacturer-specific features. The rhombic 55° presentation combined with a cylindrical hole allows secure clamping in standard DNMG-capable holders and boring bars. The plate thickness of 4.76 mm and the 55° approach angle support robust clamping and favourable load distribution, reducing vibration and enhancing process reliability in both external and internal turning set-ups. Application advantages and operational guidance This grade is tailored for operations with increased breakout risk and for interrupted cuts where tougher grades extend service intervals. The insert performs well where stable chip control and a reliable cutting edge are required, such as in batch production of components in stainless steels. Selection of the correct holder, cutting parameters and coolant strategy will further extend performance; the geometry and PVD coating together contribute to consistent results and lower overall machining costs through fewer index changes. For high-process reliability with the Tungaloy AH6235 grade, contact Metav Werkzeuge for professional advice and ordering — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6903385 SKU: 6903385-Tungaloy Manufacturer SKU: TUN6903385 Manufacturer article number: 6903385 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Material: cemented carbide Coating: PVD Grade: AH6235 Application: Turning Core data ISO designation: DNMG150416 Insert type: DNMG (rhombic 55°) Size: 15 mm Thickness: 4.76 mm Corner radius: 1.6 mm Relief/clearance angle: 0° Insert angle: 55° Hole: cylindrical hole (with hole) Chipbreaker: double-sided Special features PVD-coated cemented carbide for enhanced edge life Suited to stainless steels and interrupted cuts ISO-standard format for broad holder compatibility Rhombic shape for external and internal turning Robust grade for improved process reliability FAQ What materials is this insert best suited to machine? The DNMG150416 AH6235 Tungaloy insert is optimised for stainless steels and other work-hardened materials, offering improved resistance to edge chipping in interrupted cuts. Is the DNMG150416 compatible with standard DNMG toolholders? Yes, the insert follows ISO DNMG dimensions and fits holders designed for DNMG150416 geometry, provided form, clearance and thickness match the holder specifications. How does the AH6235 grade affect tool life? The AH6235 grade combines toughness and a PVD surface layer to reduce edge breakage and thermal wear, which typically results in longer usable life under interrupted or unstable cutting conditions. What is the purpose of the double-sided chipbreaker? The double-sided chipbreaker shapes chips for controlled evacuation, reducing the risk of chip re-cutting and tool damage; this yields steadier cutting and fewer process interruptions. Can this insert be used for both external and internal turning? Yes, the rhombic 55° geometry and cylindrical-hole clamping make the insert suitable for both external profiling and internal operations where DNMG inserts are applicable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 AH8015 Wendeplatten - Tungaloy
High wear resistance and balanced edge stability make the DNMG150416 AH8015 an efficient choice for turning heat‑resistant alloys; its rhombic geometry and cylindrical hole provide secure clamping and versatile use for external and internal turning. Order the original Tungaloy inserts directly via Metav Werkzeuge or consult the technical team for selection support. DNMG150416 AH8015 Tungaloy indexable insert for turning — PVD‑coated carbide, 1.6 mm radius DNMG150416 AH8015 is a rhombic ISO turning insert designed for general turning of heat‑resistant alloys and similar demanding materials ISO rhombic insert DNMG 150416 PVD‑coated AH8015 carbide Double‑sided chipbreaker Corner radius 1.6 mm Consistent performance on heat‑resistant alloys The PVD‑coated grade AH8015 provides a controlled combination of wear resistance and cutting edge stability, making this indexable plate particularly suitable as a first choice for the general machining of heat‑resistant alloys. The carbide substrate paired with the surface finish reduces flank wear and extends tool life under thermally challenging conditions. This results in more predictable cycle times and fewer tool changes, which supports steady production flow and lower overall machining costs. Versatile rhombic geometry for external and internal turning The rhombic geometry with a 55° approach angle offers flexible engagement for both external and internal turning operations. The corner radius 1.6 mm helps to deliver a robust cutting edge that balances edge strength and surface quality. The specified 0° clearance angle and ISO conformity ensure the insert fits a wide range of standard holders when form, clearance, tolerance class, fastening, size and thickness are matched, enabling quick changeover in job‑shop and series production environments. Secure clamping and economical indexability A cylindrical hole enables reliable mechanical fixation and repeatable seating in compatible clamps and pockets, while the double‑sided chipbreaker extends usable life by allowing indexing of the plate. The reversible geometry increases the number of effective cutting edges per insert and reduces tooling costs per component. In practice, this leads to fewer inventory variations and lower per‑part tooling expenditure without compromising machining stability. Practical guidance for selection and setup Selection of the correct chipbreaker and grade should be guided by workpiece material, cutting conditions and machine stability. The ISO series construction implies that compatibility depends on holder design and tolerance class — choose the matching holder geometry and fastening system for optimum security. For users less familiar with grade selection, the Metav Werkzeuge technical advisors provide application‑oriented recommendations to match AH8015 to specific alloys and cutting parameters, ensuring efficient and repeatable machining results. Contact Metav Werkzeuge for tailored advice on Tungaloy DNMG150416 AH8015 inserts and fast availability of original parts via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947269 SKU: 6947269-Tungaloy Manufacturer SKU: TUN6947269 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Facts Corner radius: 1.6 mm Insert size: 15 mm Clearance angle: 0° Lead angle: 55° Hole: cylindrical Special features Rhombic plate geometry PVD‑coated grade AH8015 Carbide material Double‑sided chipbreaker ISO designation: DNMG150416 With hole (cylindrical) FAQ What materials is this insert best suited for? The DNMG150416 AH8015 Tungaloy plate is designed primarily for the general machining of heat‑resistant alloys, offering a balanced combination of wear resistance and edge stability appropriate for such materials. How does the double‑sided chipbreaker benefit production? A double‑sided chipbreaker provides indexability and two usable cutting positions per side, improving economy by increasing the number of usable edges and reducing tooling change frequency for the DNMG150416 insert. Will the insert fit existing ISO holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the ISO designation facilitates interchangeability when the holder matches those parameters. What role does the 1.6 mm corner radius play? The corner radius of 1.6 mm gives the cutting edge additional strength for roughing and semi‑finishing, helping to maintain surface quality while resisting chipping under intermittent or heavy cuts. Is the PVD coating necessary for all applications? The PVD‑coated surface of the AH8015 grade improves wear resistance and thermal stability, which is particularly beneficial when machining heat‑resistant alloys; for softer materials different grades may be more economical. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 AH8015 Wendeplatten - Tungaloy
A cost-effective choice that pairs PVD-coated carbide AH8015 with a 55° rhombic geometry and a 1.6 mm corner radius to deliver stable cutting-edge life and consistent performance in turning applications; order the DNMG150416 AH8015 insert directly via Metav Werkzeuge or ask their consultants if needed. DNMG150416 AH8015 Tungaloy turning insert (55° rhombic, PVD-coated carbide) DNMG150416 AH8015 is a PVD-coated carbide turning insert designed for ISO-standard external and internal turning, balancing wear resistance and edge stability for heat-resistant alloys and general machining. PVD-coated carbide grade AH8015 55° rhombic geometry for versatile turning 1.6 mm corner radius for durable edges Double-sided insert with cylindrical hole Consistent cutting performance for general turning The insert offers PVD-coated carbide in the AH8015 grade, selected for an even compromise between wear resistance and cutting-edge stability. This composition makes the tool particularly suitable for machining heat-resistant alloys where moderate thermal and mechanical loads occur. The PVD coating reduces adhesive wear and supports longer tool life under interrupted and continuous turning, which translates into fewer insert changes and improved process reliability. The result is a measurable uplift in machining consistency and reduced unplanned downtime. Secure clamping and shop-floor compatibility Designed to the ISO designation, the rhombic geometry with a 55° included angle ensures compatibility with a wide range of ISO tooling systems; holder compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The insert’s cylindrical hole supports positive fixing with standard screws and underlay sets, while the double-sided nature doubles usable edges, reducing tooling cost per cutting edge. Clear specification of the 4.76 mm plate thickness and nominal size enables straightforward selection of matching external holders or boring bars to maintain repeatable clamping and secure, vibration-minimised machining. Process economy through chip control and edge life The double-sided chipbreaker geometry contributes to predictable chip formation in common turning tasks, improving surface finish and evacuation in both external and internal operations. With a 1.6 mm corner radius, the insert provides robust edge support for stable cuts and reduced chipping risk, especially on components requiring medium to heavy engagement. The balanced grade and coating combination deliver an efficient compromise between durability and toughness, helping workshops to lower per-part costs and increase productivity while maintaining consistent part quality. Practical selection and application guidance When matching the insert to an application, choose the appropriate chipbreaker and the AH8015 grade for general-purpose turning of heat-resistant alloys and mixed material batches. The ISO-compliant designation streamlines procurement and toolholder selection; however, verification of holder geometry and clamping parameters is recommended to secure the intended performance. For tailored advice on holder compatibility or process parameters, technical guidance is available to support confident integration into production workflows. Contact Metav Werkzeuge for individual recommendations on Tungaloy turning inserts, holder compatibility and machining parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947245 SKU: 6947245-Tungaloy Manufacturer SKU: TUN6947245 Material: Carbide Series: ISO turning insert series Core technical data Corner radius: 1.6 mm Included angle: 55° Plate thickness: 4.76 mm Size: 15 mm Clearance angle: 0° Special features Grade/coating: AH8015, PVD-coated carbide Plate form: rhombic Chipbreaker: double-sided Hole: with cylindrical hole ISO designation: DNMG150416 Application: turning FAQ What materials is this insert suitable for? The DNMG150416 AH8015 turning insert is formulated for general machining including heat-resistant alloys and mixed batches where a balance of wear resistance and edge stability is required. How does the AH8015 grade affect tool life? AH8015, a PVD-coated carbide grade, offers balanced wear resistance and edge strength that helps extend insert life under typical turning loads while maintaining consistent surface quality. Is the insert compatible with standard ISO holders? Yes, the insert follows the ISO designation DNMG150416; compatibility depends on holder form, clearance angle, tolerance and fastening—verify these parameters when selecting a holder. How many cutting edges are available per insert? The double-sided design provides multiple usable cutting edges, effectively reducing the tooling cost per edge compared with single-sided alternatives. What is the correct corner radius for heavy but stable cuts? The insert features a 1.6 mm corner radius, which supports robust cutting conditions with improved resistance to edge chipping and better stability in medium to heavy turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated cemented carbide and ISO conformity for reliable, repeatable turning performance; the robust geometry and double-sided design reduce tooling costs and simplify inventory. Order directly via Metav Werkzeuge or contact our consultants for specification support. DNMG150416 AH8015 indexable insert for Turning by Tungaloy — PVD-coated cemented carbide, 55° geometry DNMG150416 AH8015 is an ISO‑standard rhombic indexable insert designed for general turning of heat‑resistant alloys and a wide range of steels. PVD-coated cemented carbide AH8015 ISO‑standard rhombic DNMG geometry 0° clearance for stable cutting Double-sided insert with cylindrical hole Precision and productivity for heat‑resistant alloys The PVD coating and cemented carbide substrate of this insert deliver a balance between wear resistance and edge stability, making it well suited to machining heat‑resistant alloys where thermal loads are significant. The selected grade AH8015 is formulated to maintain a sharp cutting edge under cyclic heat, which reduces flank wear and extends usable life; this in turn lowers per‑component tooling cost and increases uptime on production lathes. For shops seeking predictable tool life, the coated carbide surface supports higher cutting speeds while preserving component tolerances. Seamless integration with ISO tool systems Compliance with ISO dimensions and the rhombic DNMG form ensures straightforward compatibility with established holders and boring bars. The insert’s fit depends on shape, relief angle, tolerance class, fixing method, size and thickness; using ISO‑standard inserts simplifies tool provisioning and reduces set‑up time. The central cylindrical hole and standard clamping features allow secure mounting and repeatable indexing. For production lines that run multiple operations, standardisation of inserts cuts administrative overhead and makes replacements faster. Stable cutting geometry for controlled chip formation The 55° principal cutting angle combined with a 0° clearance geometry and a corner radius of 1.6 mm contributes to predictable cutting forces and a robust cutting edge. The double‑sided chipbreaker design permits two effective cutting edges per index, offering economical usage especially in roughing and semi‑finishing passes. Stable geometry reduces vibration and improves surface finish without demanding excessive machine rigidity, which benefits both high‑precision job shops and general metalworking facilities. Practical selection and workshop guidance Select this insert for external and internal turning where a balance of durability and edge stability is required; choose the chipbreaker and grade according to workpiece material and machining stability. The insert suits a wide material spectrum when paired with appropriate speeds and feeds: tougher alloys benefit from the AH8015 balance of wear resistance and edge strength, while the PVD layer helps reduce built‑up edge. If further machining parameters or compatibility checks are required, technical specifications and cutting data can be supplied to support process planning. For specification advice, batch supply or to discuss suitable holders, contact Metav Werkzeuge for tailored recommendations and local delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947220 Manufacturer SKU: TUN6947220 Model series: ISO indexable turning inserts Numbers / Core technical data Corner radius: 1.6 mm Thickness: 4.76 mm Size: 15 mm Main angle: 55° Clearance angle: 0° Designs / Special features Cemented carbide substrate PVD coating, grade AH8015 Rhombic plate form (DNMG) Cylindrical hole for clamping Double-sided chipbreaker ISO‑compliant geometry Application: Turning FAQ What materials are suitable for this insert? The DNMG150416 AH8015 insert is engineered for heat‑resistant alloys and a broad range of steels; the AH8015 PVD‑coated cemented carbide offers a compromise between wear resistance and edge stability for general turning. Is this insert compatible with standard DNMG holders? Yes, the rhombic DNMG form and ISO‑standard dimensions ensure compatibility with standard DNMG holders, provided the holder matches the insert size, thickness and hole style. How does the 55° geometry affect machining? A 55° principal cutting angle provides a favourable balance between cutting force direction and surface finish; combined with the 0° clearance it supports stable cutting and controlled chip flow in turning operations. Can the insert be indexed to use both sides? Yes, the insert is double‑sided and features a central cylindrical hole for reliable clamping, allowing effective use of multiple cutting edges before replacement. Where to find cutting data for this grade? Cutting parameters for AH8015 depend on workpiece material and machine rigidity; Metav Werkzeuge can supply application‑specific data and recommendations for safe speeds and feeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 AH8015 Wendeplatten - Tungaloy
Take advantage of PVD‑coated cemented carbide and a double‑sided chipbreaker to secure repeatable edge life and reliable chip control in turning of heat‑resistant alloys; order through Metav Werkzeuge or request compatibility advice for safe holder pairing. DNMG150416 AH8015 Tungaloy turning insert (ISO 150416) — PVD carbide, 55° DNMG150416 AH8015 is an ISO‑standard indexable turning insert designed for general turning of heat‑resistant alloys and other demanding materials ISO DNMG150416 geometry, 55° cutting angle PVD‑coated cemented carbide AH8015 Double‑sided chipbreaker for stable chips Rhombic form; cylindrical hole; 4.76 mm thickness Consistent edge life for steady production The PVD‑coated cemented carbide grade AH8015 combines wear resistance with edge stability to deliver longer tool life under elevated temperatures. In practice, this means fewer interruptions for indexation and more predictable batch throughput. The 55° approach angle and a 1.6 mm corner radius produce a balance between cutting forces and surface finish, reducing vibration on less rigid setups. The double‑sided chipbreaker specifically promotes short, controllable chips during longitudinal and turning passes, improving conveyor and machine cleanliness. Geometry that adapts to diverse turning tasks The rhombic plate form with a 55° cutting angle and a 0° clearance provides a versatile geometry for both external and internal turning operations. The central cylindrical hole ensures secure clamping in a wide range of ISO holders; compatibility is determined by plate form, relief angle, tolerance class, fastening and plate thickness. Choosing this geometry allows for straightforward substitution into established tool systems while maintaining cut stability and repeatable positioning after every index. Clear technical benefits for process optimisation A single insert offers two cutting edges thanks to the double‑sided design, reducing per‑edge cost and simplifying inventory management. The 4.76 mm plate thickness contributes to rigidity in interrupted cuts and longer overhangs, while the 1.6 mm corner radius supports a reliable surface finish without excessive cutting loads. These measurable characteristics help planners calculate tool life and cycle time improvements and support rational decisions about machining parameters and inserts per component family. Material and coating explained in plain terms The PVD coating is a thin, adherent layer applied to the carbide substrate to raise temperature resistance and reduce abrasive wear; it is particularly effective for heat‑resistant alloys that tend to accelerate flank and crater wear. The substrate—cemented carbide—provides the toughness needed to withstand mechanical shocks and maintain edge geometry. For users less familiar with metallurgical terms, this combination means the insert holds its edge longer at higher cutting speeds, translating directly into fewer tool changes and a more stable process. For machining tasks that demand a balance of durability and edge stability, contact Metav Werkzeuge for compatibility checks and supply of the Tungaloy DNMG150416 AH8015 turning inserts. Technical data Article number: 6760665 Manufacturer SKU: TUN6760665 Merchant SKU: 6760665-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: DNMG150416 AH8015 Core dimensions Corner radius: 1.6 mm Cutting angle: 55° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 15 mm Features & compatibility PVD‑coated cemented carbide (AH8015) Double‑sided chipbreaker Rhombic plate form (DNMG) Cylindrical hole for secure clamping ISO‑standard turning insert series Compatibility via form, clearance, tolerance, fastening, size, thickness FAQ What materials is this insert suited for? The Tungaloy DNMG150416 AH8015 insert is intended primarily for heat‑resistant alloys and general turning; the AH8015 grade offers a balance of wear resistance and edge stability for such materials. How many cutting edges are available per insert? The double‑sided design provides two usable edges per insert, enabling economical indexation and reduced tooling consumption for production runs. What determines whether the insert fits a holder? Fit depends on ISO geometry, relief/clearance angle, tolerance class, fastening method, plate size and thickness; check these parameters against the intended external holder before assembly. Is the coating suitable for high cutting speeds? The PVD coating on the AH8015 grade increases thermal resistance and wear life, making the insert suitable for elevated cutting speeds in appropriate machining strategies. Which SKU should be referenced when ordering? Please reference merchant SKU 6760665‑Tungaloy or manufacturer SKU TUN6760665 when specifying the Tungaloy DNMG150416 AH8015 indexable turning insert. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150416 T5115 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T5115 and a 55° rhombic geometry for reliable cast-iron turning; the 1.6 mm corner radius and double-sided chipbreaker deliver consistent chip control and stable cutting. Order directly via Metav Werkzeuge or consult their advisors for cutting data and availability. DNMG150416 T5115 indexable turning insert, CVD-coated carbide, 55° rhombic geometry — Tungaloy The DNMG150416 T5115 is an ISO rhombic indexable insert for external and internal turning, optimised as a universal grade for cast iron with a balance of wear resistance and cutting-edge stability DNMG150416 shape, 55° rhombic geometry CVD-coated carbide grade T5115 for cast iron 1.6 mm corner radius for stable cutting Double-sided chipbreaker with cylindrical hole Consistent performance in cast-iron turning The CVD-coated carbide grade T5115 provides a balanced mix of wear resistance and edge stability, making the insert suitable for a broad range of cast-iron turning tasks. The coating improves resistance to abrasive wear and thermal loading, which translates into predictable tool life and reduced downtime. Coupled with the engineered double-sided chipbreaker, the design supports reliable chip formation and evacuation, lowering the risk of surface defects and improving machining efficiency. Secure clamping and ISO compatibility for reliable setup Constructed to the ISO turning insert standard, the indexable plate features a cylindrical hole and defined geometry that determine compatibility with external holders and boring bars. Compatibility is governed by form, clearance angle, tolerance class, fastening method, size and thickness, so correct holder matching ensures repeatable positioning and clamping stiffness. The 4.76 mm thickness and robust rhombic form contribute to mechanical stability during heavier cuts, helping maintain surface quality and dimensional accuracy. Reduced cycle times and economical edge usage A 1.6 mm corner radius provides a compromise between edge strength and finishing capability, enabling effective material removal without sacrificing surface finish on cast iron components. The double-sided configuration allows rotation to a fresh edge, extending service life per insert and reducing tooling cost per part. With a compact 15 mm inscribed circle and a 55° approach, the insert supports a variety of turning strategies—from light finishing passes to more aggressive finishing steps—while maintaining process security and predictable results. For application-specific cutting data, stock enquiries or tailored advice on using Tungaloy DNMG150416 T5115, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support and supply. Technical data Article number: 6852972 Manufacturer SKU: TUN6852972 SKU: 6852972-Tungaloy Product designation: DNMG150416 T5115 Facts Corner radius: 1.6 mm Thickness: 4.76 mm Inscribed circle / size: 15 mm Main angle: 55° Clearance angle: 0° Special features CVD-coated carbide Universal grade T5115 for cast iron Rhombic shape, 55° geometry Double-sided chipbreaker Cylindrical hole ISO series indexable turning insert Application: turning FAQ Which materials is this insert primarily designed for? The DNMG150416 T5115 insert is specified as a universal grade for cast iron, delivering a balance of wear resistance and edge stability tailored to that material. How is holder compatibility ensured for this insert? Compatibility depends on the insert form, clearance angle, tolerance class, fastening, size and thickness; matching the insert to a suitable ISO-compliant holder is required for secure clamping and repeatable positioning. What chip control does the insert provide? The insert features a double-sided chipbreaker, designed to promote consistent chip formation and evacuation when machining cast iron. Is the insert indexable and reversible? Yes — the plate is double-sided and indexable, allowing rotation to fresh cutting edges to extend overall service life. Which geometric features contribute to stability during cutting? The 55° rhombic geometry, 4.76 mm thickness and 1.6 mm corner radius together enhance mechanical support and edge strength for stable performance in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 T515 Wendeplatten - Tungaloy
Combining the CVD‑coated T515 grade with reliable chip control and a 55° rhombic geometry delivers economical, productive turning of cast iron. The insert’s 1.6 mm corner radius and double‑sided chipbreaker support stable external and internal turning; order the DNMG150416 T515 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150416 T515 Turning insert by Tungaloy — 55° rhombic geometry, CVD-coated carbide DNMG150416 T515 — a precision ISO‑standard turning insert designed for efficient machining of cast iron in general turning applications CVD-coated carbide grade T515 for cast iron ISO rhombic DNMG 55° geometry 1.6 mm corner radius, double-sided chipbreaker Higher productivity for cast iron turning with consistent chip control The CVD‑coated carbide of grade T515 is formulated for the economical machining of cast iron, combining wear resistance with predictable edge performance. Inserting the DNMG150416 into a properly matched holder provides productive turning through consistent chip formation and reduced edge flaking, especially under interrupted cuts. The double‑sided chipbreaker helps maintain short, controllable chips which simplifies swarf handling and reduces cycle time, translating into measurable process efficiency gains on batch and single‑piece production. ISO compatibility and straightforward installation for reliable set‑up As an ISO rhombic insert with 55° main cutting geometry, the DNMG150416 is compatible with a wide range of standard external holders and boring bars when matched by form, clearance angle, tolerance and fastening. The insert’s specifications — 0° relief angle, plate thickness 4.76 mm and cylindrical hole mounting — ensure secure clamping and repeatable positioning. Clear identification of the insert size and tolerance simplifies tool selection and reduces set‑up variability for production environments with multiple machines and operators. Longer tool life and cost‑effective performance under variable conditions The combination of a CVD coating and a robust carbide substrate results in balanced wear behaviour: resistance to abrasive wear while preserving edge stability. That balance yields longer tool life and fewer indexings, which lowers tooling costs per component. The 1.6 mm corner radius offers a compromise between strength and surface finish, permitting higher feeds for improved productivity without compromising dimensional control. Choosing the insert grade and chipbreaker according to workpiece stability and cutting speed optimises the overall cost‑benefit ratio in daily shopfloor use. Suitable applications and selection guidance for practical use Designed primarily for turning operations on cast iron, the insert is suitable for both external and internal turning when the cutting parameters and holder rigidity match the operation. For unstable set‑ups or heavy interruptions, selecting a lower cutting speed and ensuring solid toolholding will preserve the edge life of the grade T515. When replacing or reindexing, verify the holder’s seat and fastening parts for wear; correct clamping ensures the repeatable performance intended by the ISO‑standard geometry. For reliable cast‑iron turning with the Tungaloy T515 grade, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 6760661-Tungaloy Manufacturer article number: 6760661 Manufacturer SKU: TUN6760661 Model series: ISO-Drehwendeschneidplatten Product designation: DNMG150416 T515 Facts Corner radius: 1.6 mm Plate thickness: 4.76 mm Inscribed circle/size: 15 mm Main angle: 55° Relief angle: 0° Special features CVD-coated carbide grade T515 Rhombic DNMG form, ISO standard Double-sided chipbreaker Cylindrical hole mounting Material: carbide Application: turning (external and internal) Suitable for cast iron machining FAQ What materials is this insert best suited for? The DNMG150416 T515 insert is optimised for machining cast iron; the CVD‑coated carbide substrate and the chipbreaker geometry promote stable chip control and wear resistance in these materials. Which geometry and mounting features does the insert have? The insert features a 55° rhombic geometry with a 0° relief angle, a 1.6 mm corner radius, plate thickness 4.76 mm and a cylindrical hole for secure ISO‑standard mounting. Is the insert single‑ or double‑sided and how does that affect life? This DNMG insert is double‑sided, allowing indexing to a fresh cutting edge; combined with the T515 grade, this typically reduces tooling cost per part through extended overall edge life. How should the holder be selected for best results? Selection depends on form, clearance angle, tolerance, fastening and thickness; matching the holder to the insert’s ISO DNMG form and ensuring rigid clamping delivers the repeatable performance intended. What benefit does the CVD coating provide in everyday use? The CVD coating on the T515 grade improves abrasive wear resistance while maintaining edge strength, which is particularly advantageous when machining abrasive cast iron grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150416 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide wear resistance, ISO‑standard 55° rhombic geometry, and reliable indexable performance for efficient turning of stainless steel components; order the insert via Metav Werkzeuge or consult our specialists for application advice. DNMG 150416 T6215 indexable turning insert — ISO rhombic 55° by Tungaloy The DNMG150416 T6215 is an ISO‑format rhombic turning insert crafted for stable to mildly interrupted machining of stainless steel in external and internal turning operations. ISO rhombic insert DNMG150416 CVD‑coated carbide T6215 For stainless steel machining Double‑sided, cylindrical hole Higher productivity through CVD‑coated carbide and grade design The CVD‑coated carbide grade provides a wear‑resistant surface that extends tool life under the demanding abrasion and built‑up edge tendencies of stainless steel. In practice this means fewer indexations and longer uninterrupted production runs, which converts directly into lower cycle costs and improved process reliability. The coating and substrate combination is engineered to offer stable cutting behaviour during prolonged contact, so machine time is used more efficiently and component quality remains consistent. Secure clamping and ISO compatibility for simple tool management Built to the ISO series, the insert’s rhombic 55° geometry and cylindrical hole ensure predictable fitment with compatible holders; compatibility depends on form, clearance, tolerance class, fastening method, size and thickness. The insert’s double‑sided construction allows indexation to a fresh edge, while the specified 0° clearance angle provides a neutral cutting disposition that supports repeatable chip formation. For workshops aiming to standardise tooling, this predictability eases inventory handling and reduces setup time. Clear dimensions and application benefits for everyday turning Key measured attributes — 1.6 mm corner radius, 4.76 mm plate thickness, and nominal size 15 — contribute to a robust edge geometry suited for turned surfaces that demand both form integrity and surface finish. The doppelseitig chipbreaker (double‑sided) is matched to the grade for typical turning tasks, and the overall system concept includes the ISO insert, a suitable outer holder or boring bar, a support pad or clamp set, and replacement screws for secure assembly. Selecting the appropriate chipbreaker and grade combination according to material, cut type and machine stability delivers the intended balance between productivity and surface quality. For reliable stainless‑steel turning with Tungaloy’s T6215 grade, contact Metav Werkzeuge for tailored advice and fast supply at info@metav-werkzeuge.com or call +49 2822 7131930 — specialists will confirm suitability for the intended turning application. Technical Data Article number: 6944683 Manufacturer SKU: TUN6944683 SKU: 6944683-Tungaloy Facts Corner radius: 1.6 mm Insert angle: 55° Plate thickness: 4.76 mm Size: 15 Clearance angle: 0° Special features Material: Cemented carbide Coating: CVD (T6215) Shape: Rhombic (55°) Hole: Cylindrical hole, with hole Chipbreaker: Double‑sided Application: Turning Model series: ISO turning indexable inserts FAQ Is this insert suitable for machining stainless steel? The DNMG150416 T6215 is specifically designed for stainless steel under stable to lightly interrupted cutting conditions; the CVD coating enhances wear resistance during such operations. What are the key dimensions to check when selecting a holder? Check the 55° rhombic form, the plate thickness of 4.76 mm, the size designation 15 and the cylindrical hole to ensure matching to the chosen holder and clamp system. What does the T6215 grade indicate? T6215 denotes a CVD‑coated cemented carbide grade optimised for wear resistance and stable cutting in stainless steel applications. How does the 1.6 mm corner radius affect machining? A 1.6 mm corner radius helps produce a stronger cutting edge and a balanced surface finish; it is suitable for general turning where edge robustness and decent surface integrity are required. Is the insert indexable and how is it mounted? The insert is double‑sided and indexable; it mounts via the cylindrical hole and is secured in a corresponding ISO‑compatible holder or boring bar, with compatibility determined by form, tolerance and fastening method. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150416 T6215 Wendeplatten - Tungaloy
Benefit from the T6215 CVD-coated grade and the precise DNMG150416 geometry for stable chip formation and prolonged tool life; this combination supports consistent turning performance and reduced downtime. Order the DNMG150416 T6215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150416 T6215 Tungaloy insert — ISO turning insert for stable stainless steel machining DNMG150416 T6215 Tungaloy insert designed as an ISO-compliant rhombic turning insert for external and internal turning where stable to lightly interrupted cuts are required CVD-coated carbide grade T6215 Optimised for stainless steel turning Rhombic DNMG 15 x 4.76 mm geometry Double-sided chipbreaker, 0° clearance Reliable cutting performance for stainless steels The T6215 grade is a CVD-coated carbide engineered for wear resistance during the turning of stainless steel, delivering stable cutting behaviour under consistent and lightly interrupted conditions. The coating reduces flank wear and supports a longer tool life, which contributes directly to machine uptime. For production environments where repeatability matters, the combination of a wear-resistant substrate and a tailored coating yields fewer insert changes and steadier part quality, increasing overall process efficiency. Secure seating and geometry that aid accuracy The rhombic DNMG form with a 55° included angle and a 1.6 mm corner radius provides a balanced compromise between strength and edge definition. The insert’s 0° clearance and cylindrical hole ensure reliable clamping in ISO-compatible holders; compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The 4.76 mm thickness and 15 mm nominal size give robust support for side loads, helping to maintain concentricity and surface finish during both external and internal turning operations. Productivity gains from chip control and two usable edges A double-sided chipbreaker design offers two indexable cutting edges per side, enabling efficient utilisation of the insert and predictable chip formation when machining challenging alloys. The chip geometry works together with the grade to reduce built-up edge and improve surface integrity, which in turn can shorten downstream finishing tasks. By selecting an insert whose chipbreaker and cutting geometry match the machining stability, shops can achieve a measurable uplift in throughput while keeping tooling costs under control. Practical fit for workshop integration As an ISO-series turning insert, the item integrates into standard toolholding systems, requiring only that the correct holder form and clamping parts are chosen. The insert’s specification (shape, thickness, hole style and tolerance) must match the holder to ensure safe operation; when correctly matched, the system delivers repeatable positioning and straightforward indexing. The CVD coating and carbide substrate combine to offer consistent performance across batches, making the insert a dependable choice for batch production and single-piece flow alike. For high-performance turning with Tungaloy’s CVD-coated T6215 grade, contact Metav Werkzeuge for availability and tailored tooling recommendations. Technical data Article number: 6903034 Manufacturer SKU: TUN6903034 Our SKU: 6903034-Tungaloy Manufacturer item number: 6903034 Facts Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 1.6 mm Clearance angle: 0° Included angle: 55° Special features Material: Hartmetall Grade/sort: T6215 Schneidstofftyp: CVD-coated carbide Plate form: rhombic (DNMG) Hole: with cylindrical hole Chipbreaker: double-sided Model series: ISO-Drehwendeschneidplatten Intended application: Drehen Compatibility: determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ Is this insert suitable for heavy interrupted cuts on stainless steel? The DNMG150416 T6215 insert is optimised for stable to lightly interrupted conditions; heavy interruptions require assessment of holder rigidity and cutting parameters before use. How many cutting edges are available per insert? The insert offers multiple usable edges due to its double-sided design and indexable geometry, enabling efficient edge rotation to extend service life. Which toolholders fit this insert? ISO-compatible holders that accept DNMG-format inserts and match the stated thickness, hole style and clearance angle will secure the DNMG150416 T6215 correctly. Does the coating improve resistance to built-up edge when machining stainless steel? Yes, the CVD-coated carbide T6215 enhances wear resistance and helps control built-up edge during the turning of stainless steel alloys. What is the nominal size and thickness of the insert? The insert has a nominal size of 15 mm and a thickness of 4.76 mm, with a 1.6 mm corner radius and 55° included angle. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide for high wear resistance and a 1.6 mm corner radius for robust edge life to ensure stable turning of stainless steels; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DNMG150416 T6215 indexable turning insert for precision external and internal turning — Tungaloy DNMG150416 T6215 is a rhombic, ISO-standard indexable insert designed for turning applications, offering a CVD-coated carbide grade for extended tool life in stainless steel machining. DNMG150416 rhombic indexable insert CVD-coated carbide grade T6215 for stainless steel Double-sided chipbreaker for stable cutting 1.6 mm corner radius with 0° clearance Stable chip control for consistent productivity The geometry features a double-sided chipbreaker combined with a CVD-coated carbide substrate to provide consistent chip formation under moderate to slightly interrupted cuts. This combination reduces the risk of built-up edge and supports predictable chip flow, which translates into fewer interruptions on the shop floor and a higher effective throughput. The engineered chip control helps maintain surface finish quality while allowing for productive cutting data, making the insert a reliable option for serial machining tasks that demand repeatability. Predictable fit and secure clamping for ISO tool systems Compatibility with the toolholder is ensured by ISO-conformant dimensions and a rhombic plate form, together with a cylindrical hole and standard thickness of 4.76 mm. The 0° clearance and defined tolerance classes make set-up straightforward and reproducible across different clamping systems. Clear mechanical interface specifications reduce set-up time and minimise alignment errors, which supports stable tool engagement and repeatable part geometry in both external and internal turning operations. Optimised for stainless steel and edge stability The T6215 grade provides a wear-resistant surface tailored for machining stainless steel, offering a balance between hardness and chipping resistance. With a corner radius of 1.6 mm, the insert delivers a robust cutting edge that tolerates intermittent cut conditions while still achieving acceptable surface quality. This makes it suited to a range of turning tasks where a compromise between edge strength and finishing capability is required, particularly when processing stainless alloys that tend to work-harden or produce stringy chips. Contact Metav Werkzeuge for tailored tooling advice and to arrange supply of the Tungaloy DNMG150416 T6215 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6944711 Manufacturer SKU: TUN6944711 SKU: 6944711-Tungaloy Label: DNMG150416 T6215 Tungaloy-Wendeplatte Facts Corner radius: 1.6 mm Included angle: 55° Plate thickness: 4.76 mm Plate size: 15 mm Special features Material: carbide Coating: CVD Grade: T6215 Plate form: rhombic Hole style: cylindrical hole Chipbreaker: double-sided Clearance angle: 0° Application: turning (external and internal) Suitable for: stainless steel FAQ Is this insert suitable for machining stainless steel? Yes. The DNMG150416 T6215 insert is specifically graded (T6215) and CVD-coated for wear resistance when turning stainless steel under stable to slightly interrupted conditions. What is the corner radius and how does it affect cutting? The corner radius is 1.6 mm; this provides a robust cutting edge that improves resistance to chipping and suits medium-finish turning where edge strength is important. Can the insert be used in standard ISO holders? Yes. The geometry follows ISO dimensions for DNMG150416 so compatibility depends on holder form, clearance, tolerance class and clamping style. What chip control does the insert offer? The insert features a double-sided chipbreaker designed to promote controlled chip formation and reduce the likelihood of stringing during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 T6215 Wendeplatten - Tungaloy
Combine CVD-coated carbide wear resistance, double-sided chip control and a 55° rhombic form for reliable stainless-steel turning; order the insert directly via Metav Werkzeuge or ask our consultants for application support. DNMG150416 T6215 turning insert — Tungaloy, CVD-coated carbide, 55° rhombic DNMG150416 T6215 is an ISO-format turning insert intended for stable to lightly interrupted machining of stainless steels. CVD-coated carbide for wear resistance Optimised for stainless steel turning Double-sided chipbreaker for consistent chips 55° rhombic form with cylindrical hole Consistent cutting performance for stainless-steel applications The combination of a CVD-coated layer on a carbide substrate delivers enhanced wear resistance and thermal stability, which is particularly important when machining stainless steels. The grade is formulated for stable to lightly interrupted conditions, so the insert maintains edge integrity during extended runs. Improved wear resistance translates into fewer tool changes and more predictable cycle times, supporting efficient shop-floor scheduling and higher overall process efficiency. Secure clamping and ISO compatibility for repeatable results As an ISO-format plate, the insert relies on correct matching with the toolholder: shape, clearance angle, tolerance class, fixing method, size and thickness determine compatibility. The rhombic 55° geometry and cylindrical hole ensure reliable location and clamping in compatible external holders or boring bars. This standardised fitment enables repeatable positioning and stable cutting conditions, which contribute directly to a uniform surface finish and reduced set-up time. Productivity and controlled chip formation Equipped with a double-sided chipbreaker, the insert produces consistent chip shapes that ease evacuation and reduce the risk of workpiece damage. Stable chip control helps maintain cutting forces within predictable limits, offering improved process security and a better surface quality. The design focus on controllable chips and durability supports higher productivity and lower unit machining costs in serial production. System thinking: recommended components and selection tips A complete system typically comprises the ISO-format insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. Select the chipbreaker and grade according to the workpiece material, the machining type (external or internal turning) and the rigidity of the set-up. Where interrupted cuts or poor rigidity are expected, favour a holder and clamping scheme that maximise support and reduce vibration to protect the cutting edge and preserve tool life. For application advice or to order genuine Tungaloy inserts, contact Metav Werkzeuge—request technical support or place an order via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6944728 Manufacturer SKU: TUN6944728 Our SKU: 6944728-Tungaloy Model series: ISO-Drehwendeschneidplatten Article designation: DNMG150416 T6215 Tungaloy turning insert Facts Corner radius: 1.6 mm Plate size: 15 mm Plate thickness: 4.76 mm Insert angle: 55° Clearance angle: 0° Special features Material: carbide (CVD-coated) Double-sided chipbreaker Rhombic plate form Cylindrical hole, with hole Intended application: turning Typical system: insert + external holder or boring bar + shim/clamp set + replacement screws ISO-format insert, compatibility by form, clearance angle, tolerance class, fixing, size and thickness FAQ Is this insert suitable for machining stainless steels? Yes. The DNMG150416 T6215 is a CVD-coated carbide grade designed for turning stainless steels under stable to lightly interrupted conditions. Which toolholders fit this insert? Compatible holders are ISO-standard external holders or boring bars that match the rhombic 55° form, the clearance angle and the plate thickness; the cylindrical hole supports secure clamping. How does the double-sided chipbreaker help in production? The double-sided chipbreaker promotes consistent chip shapes for reliable evacuation and improved surface quality, reducing downtime related to chip control. What components are needed for a complete cutting system? A complete set-up comprises the insert, a matching external holder or boring bar, a shim/clamp set and replacement screws as required for secure assembly. How should the chipbreaker and grade be chosen? Select the chipbreaker and grade according to the workpiece material, the machining operation and the stability of the set-up; the T6215 grade is optimised for stainless-steel applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and a robust DNMG rhombic geometry to achieve consistent productivity in medium steel turning; order directly via Metav Werkzeuge or consult our specialists for application support. DNMG150416 T9215 indexable turning insert, 55°, Tungaloy DNMG150416 T9215 is an ISO-standard indexable insert designed for turning operations, supplying high wear resistance and reliable performance in medium steel machining. CVD-coated carbide grade T9215 Designed for medium steel machining Double-sided chipbreaker for productivity Rhombic DNMG shape with 55° cutting angle High productivity through engineered coating and grade The insert is manufactured from carbide with a CVD coating, embodied in the T9215 grade to deliver elevated wear resistance and good fracture toughness. This combination reduces flank and crater wear under sustained cutting conditions, enabling longer tool life and fewer index changes. Choosing a CVD-coated insert means less downtime for replacement and a more predictable maintenance cycle, which supports higher throughput on turning centres and lathes. Geometry and mounting that balance strength and versatility The DNMG rhombic form and its 55° cutting angle provide a versatile compromise between cutting-edge strength and access to workpiece contours. The 1.6 mm corner radius offers a secure edge for general turning tasks, while the double-sided chipbreaker improves chip control across a range of cutting depths. The insert is supplied with a cylindrical hole to match standard clamping systems; correct selection of holder, backing shim and clamp set preserves repeatability and runout tolerance during production. ISO compatibility and recommended application window As an ISO-standard turning insert, compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness. The insert is optimised for continuous and slightly interrupted cuts in medium steel, delivering stable machined surfaces and consistent dimensional results. The system approach — insert, appropriate external holder or boring bar, backing/lock set and spare screws — ensures predictable performance in series production and makes integration straightforward for workshop environments. For further process advice, our technical team can assist with holder selection and parameter tuning; email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed guidance. Contact Metav Werkzeuge today to discuss Tungaloy turning inserts and receive tailored recommendations for your turning applications, or request support with holder compatibility and cutting data. Technical Data Article number: 6774117 Manufacturer SKU: TUN6774117 Label: DNMG150416 T9215 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Corner radius: 1.6 mm Cutting angle: 55° Plate thickness: 4.76 mm Plate size: 15 Special features Material: carbide Grade: T9215 Coating: CVD Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Clearance angle: 0° Application: turning FAQ What materials is this insert best suited for? The DNMG150416 T9215 indexable insert from Tungaloy is optimised for medium steel machining and performs well under continuous to lightly interrupted turning operations. How does the T9215 grade affect tool life? Tungaloy’s T9215 grade, with its CVD-coated carbide composition, increases wear resistance and fracture toughness, leading to longer life and fewer tool changes in production. Can the insert be used in standard ISO holders? Yes, the insert conforms to ISO dimensions; compatibility requires matching holder form, clearance angle, tolerance class, fastening method, size and thickness for secure clamping. What benefits does the double-sided chipbreaker provide? The double-sided chipbreaker enhances chip control and allows both faces to be used, improving economy per insert while maintaining consistent chip formation and surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, a 1.6 mm corner radius and proven ISO geometry for reliable medium-steel turning; order directly via Metav Werkzeuge or consult their specialists for application support. DNMG150416 T9215 — ISO indexable turning insert, CVD-coated carbide by Tungaloy The DNMG150416 T9215 is an ISO‑standard rhombic indexable insert for external and internal turning, designed for productive machining of medium steels CVD-coated carbide grade T9215 Rhombic DNMG 55° geometry 1.6 mm corner radius for robust cuts Double-sided chipbreaker with cylindrical hole Productivity through a wear-resistant grade The CVD‑coated T9215 grade combines high wear resistance with good fracture resistance, making it a reliable choice for sustained production cycles. By selecting a coated carbide substrate, the insert keeps cutting edges longer under continuous or slightly interrupted cuts, which reduces tool changes and increases machine uptime. The technical design favours consistent performance in medium‑range steel machining, allowing process planners to rely on stable cutting data and predictable tool life. Secure seating and repeatable geometry for consistent results Compatibility with the toolholder depends on a precise match of form, clearance angle, tolerance class, clamping method, size and thickness. The ISO‑standard rhombic shape with a 55° insert angle and a thickness of 4.76 mm ensures a snug fit in compatible DNMG carriers and boring bars. The insert’s cylindrical hole provides secure clamping and repeatable positioning, which supports cycle‑to‑cycle accuracy and easier indexation when turning demands quick edge changes. Improved chip control and edge reliability The double-sided chipbreaker geometry is engineered to manage chip formation for typical turning feeds and depths in medium steel. Paired with a 1.6 mm corner radius, the edge offers a balance between strength and surface finish: larger radii reinforce the cutting edge under heavier engagement, while the breaker promotes safe chip evacuation. For applications with intermittent cuts, the grade’s fracture resistance contributes to fewer unexpected edge failures and steadier production quality. System integration and practical application advice This insert is part of an ISO turning insert system that includes a compatible external holder or boring bar, a shim/clamp set and replacement screws. Typical use cases are external facing and OD/ID turning where repeatable geometry and predictable wear behaviour matter. Selection of the appropriate chipbreaker and grade should match the workpiece material, machining strategy and machine stability to achieve the best throughput and surface quality. The combination of geometry, coating and material makes the insert suitable for shopfloor environments aiming for efficient, repeatable operations. For application advice or to discuss how Tungaloy DNMG150416 T9215 can be integrated into existing tool holders, contact Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: 6773943 Manufacturer SKU: TUN6773943 Series: ISO‑Drehwendeschneidplatten Type designation: DNMG150416 Facts Corner radius: 1.6 mm Insert angle: 55° Thickness: 4.76 mm Size: 15 Clearance angle: 0° Hole style: cylindrical hole Features and materials Material: carbide Coating / grade: T9215 (CVD‑coated carbide) Geometry: rhombic (DNMG) Chipbreaker: double‑sided Application: turning (external and internal) Compatibility: determined by form, clearance angle, tolerance, clamping, size and thickness FAQ Which materials is this insert best suited for? The Tungaloy DNMG150416 T9215 is optimised for medium steels; the T9215 CVD coating provides wear resistance and fracture toughness suitable for continuous to lightly interrupted turning applications. How is compatibility with a toolholder assessed? Compatibility depends on insert form, clearance angle, tolerance class, clamping method, size and thickness; matching these parameters ensures correct seating and secure clamping for repeatable performance. Can the insert be used for internal turning (boring)? Yes, the insert’s ISO geometry and cylindrical hole allow use in appropriate boring bars or internal holders designed for DNMG‑type inserts. What does the T9215 grade indicate? T9215 is a CVD‑coated carbide grade offering a balance of high wear resistance and fracture resistance, intended as a primary choice for productive medium‑steel machining. What is the function of the 1.6 mm corner radius? A 1.6 mm corner radius increases edge strength and supports better surface finish under heavier engagements, improving robustness during standard turning operations. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150416 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, robust fracture toughness and ISO compatibility for consistent, productive turning operations; order the inserts directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. DNMG150416 T9215 — Rhombic indexable insert for turning, Tungaloy (CVD-coated carbide, 55°) The DNMG150416 T9215 is an ISO-standard rhombic indexable insert engineered for external and internal turning, optimised for medium steel machining with a dual-sided chipbreaker and secure cylindrical hole fixing CVD-coated carbide for high wear resistance T9215 grade for medium steel machining Rhombic form with 55° cutting angle Double-sided chipbreaker, cylindrical hole Boosted productivity through a wear‑resistant grade The combination of a CVD-coated carbide substrate and the T9215 grade provides a balance between wear resistance and fracture toughness, which translates into longer tool life and fewer indexings during series production. For continuous to lightly interrupted turning of medium-strength steel, this configuration reduces unplanned downtime and keeps cycle times steady. The robust coating and substrate chemistry support stable edge behaviour under elevated cutting loads, so operators and process engineers can rely on reproducible results and reduced tooling costs per component. Predictable system compatibility and simple selection Being an ISO-standard insert, compatibility with the clamping system is defined by the insert’s form, clearance angle, tolerance class, fixing method, size and thickness. The rhombic geometry with a 55° main cutting angle provides a widely supported seating in standard DNMG pockets, while the cylindrical hole and defined thickness ensure secure clamping and repeatable positioning. When selecting a holder, match the insert's dimensional and tolerance data to the toolholder specifications to guarantee correct seating and cutting edge support for accurate turning. Secure mounting and controllable chip formation The insert’s double-sided chipbreaker allows consistent chip control on both indexable faces, helping to maintain surface quality and evacuation in long cuts. A corner radius of 1.6 mm adds strength at the cutting edge for stable roughing passes, while the 4.76 mm thickness contributes to bending resistance under higher radial depths of cut. Together, these attributes support higher material removal rates with manageable vibration and improved process reliability, especially when paired with a suitably rigid holder and machine setup. Application focus and machining advice Designed as a first choice for medium steel machining, this insert performs best under continuous and slightly interrupted cutting conditions where a balance between edge life and toughness is required. The insert’s properties encourage consistent surface finish and dimensional repeatability in production turning tasks. For process optimisation, pair the insert with a holder rated for the intended depth of cut and prefer cutting parameters that maintain chip compression within the chipbreaker’s effective range; this will exploit the grade’s wear resistance without compromising the edge’s fracture strength. For application advice, spare part orders or to source Tungaloy DNMG150416 T9215 inserts directly, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and fast supply options. Technical Data Article number: 6944726 Manufacturer SKU: TUN6944726 Model series: ISO indexable turning inserts Material: Carbide Grade: T9215 Facts Cutting angle: 55° Clearance angle: 0° Corner radius: 1.6 mm Plate size: 15 mm Thickness: 4.76 mm Special features Rhombic plate form Cylindrical hole for secure fixing Double-sided chipbreaker CVD-coated carbide Suitable for external and internal turning FAQ Is this insert compatible with standard DNMG holders? Compatibility is governed by the insert form, clearance angle, tolerance, fixing method and size; the DNMG150416 T9215 insert fits holders designed for DNMG 15×15 profiles and secures via a cylindrical hole, so a matching ISO DNMG pocket and clamp ensure correct seating. Which materials is the T9215 grade suitable for? The T9215 grade is formulated as a first choice for medium steel machining; the CVD-coated carbide substrate delivers high wear resistance while maintaining fracture toughness for productive turning of non‑hardened steel. How does the 1.6 mm corner radius affect machining? A 1.6 mm corner radius provides a stronger cutting edge for higher feed and roughing passes, improving tool life and part consistency, though it may increase cutting forces compared with smaller radii. Can the insert handle interrupted cuts? Yes — the balance of wear resistance and toughness in this grade supports continuous to slightly interrupted cuts; for heavy interruptions, choose a grade and geometry optimised for impact resistance. What is the difference between the rhombic 55° form and other geometries? The rhombic form with a 55° main cutting angle offers versatility for general turning operations and is commonly used for both external and internal turning, providing a compromise between accessibility and edge strength. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T9215 and the proven rhombic geometry for reliable productivity in medium steel turning; the double-sided DNMG150416 insert with a 1.6 mm corner radius and 0° rake angle combines wear resistance with fracture toughness. Order the insert directly via Metav Werkzeuge or contact our consultants for tailored advice. DNMG150416 T9215 Indexable turning insert (CVD-coated carbide) by Tungaloy The DNMG150416 T9215 is an ISO-standard indexable insert for external and internal turning, optimised for medium steel machining and designed for compatibility with ISO holders and toolposts. CVD-coated for high wear resistance Suited to medium steel machining 55° rhombic geometry, 0° rake angle Double-sided insert with cylindrical hole Increased productivity through a balanced cutting grade The combination of a CVD coating and a wear-resistant carbide substrate in grade T9215 delivers a balance between abrasion resistance and fracture toughness, which makes this insert particularly effective for continuous to lightly interrupted turning. For production environments where cycle time and tool life both matter, the coating reduces flank wear while the substrate absorbs mechanical shocks, enabling longer tool life and fewer indexings. This technical pairing translates into more consistent component quality and reduced downtime for insert changes. Geometry engineered for stable chip control and repeatable results The rhombic 55° geometry with a 1.6 mm corner radius and 0° rake angle provides a stable cutting edge that supports both finishing and medium-depth roughing operations. A double-sided, reversible design extends service life per insert, while the cylindrical central hole ensures secure clamping in ISO-compatible holders. For users less familiar with insert geometry: the corner radius affects surface finish and strength—larger radii increase edge robustness, smaller radii improve form accuracy—so the 1.6 mm radius is a pragmatic compromise for general turning of steel. Practical selection and workshop integration Compatibility with a lathe toolholder depends on insert shape, clearance angle, tolerance class, fastening method, size and thickness; the ISO-standard DNMG150416 form simplifies holder selection across common tool systems. The double-sided layout and standard mounting hole allow quick indexings and straightforward stock keeping. For process planning, pair the T9215 grade with a chipbreaker matched to the workpiece and feed range to secure consistent chip control and surface quality. Where higher stability is available, increase cutting speeds within recommended limits to exploit the grade’s wear resistance. Contact Metav Werkzeuge for customised recommendations on holder compatibility, cutting data and delivery options — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Manufacturer article number: 6944681 SKU: 6944681-Tungaloy Model series: ISO turning indexable inserts Designation: DNMG150416 Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 1.6 mm Geometry angle: 55° Rake/clearance: 0° rake angle Special features CVD-coated carbide grade T9215 Double-sided, rhombic insert Cylindrical central hole Suitable for external and internal turning Optimised for medium steel machining FAQ Which materials is this insert intended for? The DNMG150416 T9215 indexable insert by Tungaloy is specified primarily for medium steel machining and combines wear resistance with toughness for productive turning operations. What are the key geometric characteristics of the insert? The insert has a rhombic 55° geometry, a 1.6 mm corner radius and a 0° rake angle; it is double-sided and features a cylindrical central hole for ISO-compatible clamping. Is the grade suitable for interrupted cuts? Grade T9215 is suitable for continuous to lightly interrupted cuts; its carbide substrate and CVD coating provide enhanced fracture resistance for modest interruptions. Which toolholders are compatible with this insert? Compatibility is determined by insert form, clearance angle, tolerance, fastening and thickness; any ISO-standard holder matching the DNMG150416 dimensions and clamping style will be compatible. How does the coating affect cutting performance? The CVD coating on the T9215 grade reduces abrasive wear and helps maintain consistent cutting-edge geometry, which supports longer tool life and more stable surface finish in medium steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 T9215 Wendeplatten - Tungaloy
DNMG150416 T9215 Tungaloy-Wendeplatte für Drehen Die DNMG150416 T9215 Tungaloy-Wendeplatte ist eine ISO-genormte, rhombische Hartmetallplatte für produktives Außen- und Innendrehen mit hoher Prozesssicherheit. DNMG150416 T9215 von Tungaloy CVD-beschichtetes Hartmetall für lange Standzeit Rhombische Form mit 55° Auflagewinkel Doppelseitiger Spanbrecher, mit zylindrischem Loch Eckenradius 1,6 mm für universelle Anwendungen Hohe Standzeit und belastbare Zerspanung für Stahl Die DNMG150416 T9215 nutzt CVD-beschichtetes Hartmetall, das Verschleißwiderstand und Bruchsicherheit kombiniert. Für die mittlere Stahlbearbeitung bietet diese Sorte eine ausgewogene Balance zwischen Zähigkeit und Härte, was Produktivität bei kontinuierlichem oder leicht unterbrochenem Schnitt ermöglicht. Durch die robuste Beschichtung werden Schneidkanten länger erhalten, was Rüstzeiten reduziert und die Teileausbeute verbessert. Kompatibilität und Aufbau für zuverlässigen Einsatz Die Platte ist ISO-genormt und wird über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke mit passenden Haltern kombiniert. Die rhombische Form mit 55° Auflagewinkel, Eckenradius 1,6 mm und Plattendicke 4,76 mm sorgt für sichere Spannlage. Das zylindrische Loch erlaubt einfache Montage mit Unterlage oder Klemmsatz; der doppelseitige Spanbrecher bietet kosteneffizientes Indexieren. Werkstätten sollten Halter wählen, die Form und Freiwinkel der Platte exakt aufnehmen, um Vibrationen zu vermeiden. Zielgruppe, Einsatzempfehlung und Nutzen für die Fertigung Entwickelt für Zerspanungsbetriebe, die konstante Ergebnisse bei mittleren Schnittbedingungen erwarten, eignet sich die Platte besonders für Serien in der Automobil- und Maschinenbauproduktion. Die Kombination aus CVD-Beschichtung und stabiler Spanbildung unterstützt reproduzierbare Oberflächen und verlängerte Werkzeugstandzeiten. Anwender profitieren von geringeren Werkzeugkosten pro Bauteil durch beidseitige Nutzung und einfache Nachschärfungsplanung. Setzen Sie auf die Tungaloy DNMG150416 T9215 für mehr Produktivität und fordern Sie ein individuelles Angebot bei Metav Werkzeuge an: info@metav-werkzeuge.com, +49 2822 7131930 Produktmerkmale Artikelnummer: 6944708 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: DNMG150416 T9215 Tungaloy-Wendeplatte Hersteller-SKU: TUN6944708 Fakten Eckenradius: 1,6 mm Plattendicke: 4,76 mm Plattengröße: 15 mm Auflagewinkel: 55° Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9215 (für mittlere Stahlbearbeitung) Spanbrecher: doppelseitig Plattenform: rhombisch Lochstil: zylindrisches Loch Einsatz: Drehen Modellserie: ISO-Drehwendeschneidplatten FAQ Welche Werkstoffe bearbeitet die Platte vorrangig? Die DNMG150416 T9215 ist speziell für die mittlere Stahlbearbeitung ausgelegt und bietet durch die CVD-Beschichtung guten Verschleißschutz und stabile Spanbildung bei typischen Stahlgüten. Wie beeinflusst der Eckenradius die Bearbeitung? Der Eckenradius von 1,6 mm reduziert die Empfindlichkeit gegenüber Stoßbelastungen und erlaubt universelle Anwendungen, ohne die Oberflächengüte bei Standard-Drehparametern signifikant zu verschlechtern. Ist die Platte in Haltern mit 55° Auflagewinkel einsetzbar? Ja, die rhombische Form mit 55° Auflagewinkel ist für entsprechende ISO-Halter ausgelegt; Kompatibilität hängt von Form, Freiwinkel und Befestigung des Halters ab. Was bringt der doppelseitige Spanbrecher in der Praxis? Der doppelseitige Spanbrecher ermöglicht kosteneffizientes Indexieren, da beide Schneidkanten genutzt werden können, was die Standzeit pro investierter Platte erhöht. Wie lautet die Herstellernummer und SKU für Bestellungen? Die Herstellernummer lautet 6944708 und die Hersteller-SKU ist TUN6944708; beide Angaben erleichtern die eindeutige Bestellung der Tungaloy DNMG150416 T9215 Wendeplatte. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
DNMG 150416 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance, precise ISO compatibility and reliable chip control for uninterrupted production. Order original Tungaloy inserts via Metav Werkzeuge or consult their technicians for application-specific recommendations. DNMG150416 T9215 Tungaloy indexable insert for turning, 55° rhombic, 1.6 mm radius DNMG150416 T9215 Tungaloy indexable insert designed for external and internal turning; suitable for medium steel machining with CVD-coated carbide quality CVD-coated carbide T9215 for medium steel 55° rhombic geometry with 1.6 mm radius Double-sided chipbreaker for consistent chips With cylindrical hole for secure clamping Consistent productivity and wear resistance for medium-steel turning The T9215 grade is a CVD-coated carbide designed as a first choice for machining medium-strength steel. Its composition combines high wear resistance with enhanced fracture toughness, which translates into longer tool life and fewer unexpected breakages during continuous or slightly interrupted cuts. For production environments where cycle time and uptime matter, this combination reduces downtime and the frequency of insert changes, contributing to steadier output and lower per‑part tooling cost. The insert’s coating also supports stable cutting performance across common turning speeds. Secure fit, standardised form and straightforward holder selection ISO standardisation ensures predictable interchangeability: compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness. The DNMG150416 geometry (55° rhombic, clearance angle 0°, plate thickness 4.76 mm) and the cylindrical hole allow for positive, repeatable clamping in appropriate holders. Using the correct matched holder and an appropriate shim or clamp set avoids runout and vibration, so the cutting edge maintains its integrity. That predictability simplifies tooling logistics and reduces the risk of selecting incompatible components on the shop floor. Better chip control and application guidance for stable turning A double-sided chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the chance of entanglement in external and internal turning operations. Select the chipbreaker and insert grade to match workpiece material, cutting mode and machine stability: the T9215 grade is optimised for medium-steel applications and performs well under continuous cuts and light interruptions. For interrupted cuts or unstable setups, evaluate the holder rigidity and consider a more robust clamping arrangement to preserve the tool edge and maintain process stability. Contact Metav Werkzeuge for tailored application advice and to obtain original Tungaloy DNMG150416 T9215 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772262 SKU: 6772262-Tungaloy Manufacturer SKU: TUN6772262 Model series: ISO turning inserts Material: carbide Facts Geometry angle: 55° Corner radius: 1.6 mm Plate thickness: 4.76 mm Plate size: 15 Clearance angle: 0° Hole style: cylindrical Special features Grade: T9215 Coating: CVD Plate form: rhombic Chipbreaker: double-sided With hole Application: turning ISO designation: DNMG150416 FAQ What materials is this insert suited for? The Tungaloy DNMG150416 T9215 insert is optimised for medium-strength steel; the T9215 CVD-coated carbide provides a balance of wear resistance and toughness for this material group. How does the cylindrical hole benefit mounting? The cylindrical hole on the DNMG150416 enables secure and repeatable clamping in compatible holders, improving positional accuracy and assisting process stability during turning. Can this insert be used for interrupted cuts? The T9215 grade performs well in continuous turning and light interruptions; for heavy interruptions, the cutting parameters and clamping rigidity should be reviewed before use. Is chip control supported by the insert design? Yes, the double-sided chipbreaker promotes consistent chip formation and evacuation, which helps achieve stable surface finishes when machining appropriate materials. Which identifiers should be quoted when ordering replacement inserts? When ordering, reference the DNMG150416 designation, grade T9215 and the SKU 6772262-Tungaloy to ensure the correct original Tungaloy item is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated cemented carbide T9215 for high wear resistance and fracture toughness together with the ISO DNMG geometry and a 1.6 mm corner radius to achieve consistent chip control and extended tool life; order directly via Metav Werkzeuge or ask their consultants for application-specific advice. DNMG 150416 T9215 — DNMG turning insert, CVD-coated carbide by Tungaloy The DNMG150416 T9215 is an ISO-format rhombic turning insert intended for external and internal turning, offering robust wear resistance for medium steel machining. CVD-coated carbide grade T9215 ISO DNMG geometry, 55° cutting angle Double-sided chipbreaker for reliable chips Cylindrical hole for secure clamping Increase productivity with a wear‑resistant CVD grade The CVD-coated cemented carbide grade T9215 combines high wear resistance with good fracture toughness, making the insert a reliable choice for sustained production runs. In practical terms, the coating reduces flank and crater wear under continuous and lightly interrupted cuts, which helps maintain dimensional stability and reduces the frequency of insert changes. For workshops seeking steady throughput on medium steel, this geometry and grade support higher feed rates without compromising life expectancy. Secure clamping and ISO compatibility for flexible setup The insert follows the ISO DNMG specification with a rhombic form and a 55° cutting angle, so compatibility with standard DNMG holders is determined by form, relief angle, tolerance class, fastening method, size and thickness. The design includes a cylindrical hole for positive clamping and a plate thickness of 4.76 mm, ensuring stable seating in the pocket. The insert’s listed dimensions and the 1.6 mm corner radius translate directly into predictable cutting engagement and simpler toolpath planning when retrofitting into existing toolholders. Consistent chip control and stable cutting performance Equipped with a double-sided chipbreaker, the insert produces controlled chips across a range of feeds and depths, reducing the risk of entanglement and improving surface finish. For medium steel applications, this chip control contributes to process security by limiting unexpected load peaks and supporting steady cutting forces. When combined with the coating and substrate, the chipbreaker geometry helps to sustain cutting-edge integrity, which in turn supports repeatable component quality and reduced rework. Application guidance for reliable results The insert is optimised for turning of medium steel under continuous to slightly interrupted cutting conditions; selecting the correct chipbreaker and grade for the workpiece material and machine stability is essential. Where interruptions or heavy depths occur, the combination of fracture‑resistant substrate and CVD coating reduces the likelihood of edge chipping. For new setups, trial cuts at conservative speeds followed by incremental increase will reveal the best balance between productivity and tool life. For application-specific recommendations on the Tungaloy T9215 inserts and fast supply, contact Metav Werkzeuge for tailored advice and next‑day delivery options where available. Technical Data Article number: 6773931 Manufacturer SKU: TUN6773931 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Grade/coating: T9215 (CVD-coated) Facts Geometry: DNMG150416 (DNMG) Corner radius: 1.6 mm Cutting angle: 55° Thickness: 4.76 mm Size: 15 Special features Rhombic plate form Cylindrical hole for clamping Double-sided chipbreaker Suited for external and internal turning Optimised for medium steel machining FAQ What materials is this insert best suited for? The DNMG150416 T9215 insert is best suited for medium steel machining; the T9215 CVD coating and the carbide substrate combine to manage wear and toughness suitable for continuous to slightly interrupted turning. How does the 1.6 mm corner radius affect performance? A 1.6 mm corner radius increases edge strength and improves surface finish on profiles while distributing cutting forces, which helps reduce the risk of chipping under typical turning loads. Is the insert compatible with standard DNMG holders? Yes. The insert follows ISO DNMG geometry; compatibility depends on matching form, relief angle, tolerance class, fastening method, size and thickness as specified for the holder. What advantages does the double-sided chipbreaker provide? The double-sided chipbreaker offers consistent chip formation in varying feeds and depths, aiding chip evacuation and improving process reliability and surface quality. Can the insert handle interrupted cuts? The carbide substrate combined with the T9215 coating offers improved fracture resistance, making the insert suitable for light interrupted cuts; for heavy interruptions, a dedicated roughing geometry should be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD‑coated carbide T9215 and a 1.6 mm corner radius to achieve high productivity and dependable edge life in medium‑steel turning; order the DNMG150416 directly via Metav Werkzeuge or consult our specialists for application support. DNMG150416 T9215 — DNMG ISO 150416 rhombic turning insert, CVD‑coated carbide, 55° lead angle (Tungaloy) A DNMG150416 T9215 turning insert designed for medium‑steel operations, offering a robust edge geometry and consistent chip control for continuous to mildly interrupted cuts. CVD-coated carbide for high wear resistance ISO DNMG geometry, 55° rhombic insert 1.6 mm corner radius for robust cutting edge Productivity and wear resistance for medium‑steel turning The insert is manufactured in a CVD‑coated carbide grade (T9215), which combines surface hardness with core toughness to resist abrasive wear while maintaining fracture resistance. This balance supports higher cutting speeds and longer uninterrupted runs, reducing tool changes and increasing machine uptime. CVD (chemical vapour deposition) applies a thin, dense layer that improves thermal and abrasive resistance; in practice this means more consistent part quality and extended edge life compared with uncoated grades. The specification targets the mid‑range of steel workpieces, making it a reliable choice for batch production where repeatability matters. Standardised geometry for straightforward integration The insert follows ISO DNMG geometry with a 55° lead angle and a 0° relief angle, ensuring compatibility with a wide range of external holders and boring bars. Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; the use of ISO‑standard geometry simplifies tool inventory and changeover procedures across a workshop. The 4.76 mm plate thickness and rhombic profile contribute to stable clamping and reduced vibration during turning. These design choices translate into predictable performance and easier process planning when integrating the insert into existing tool systems. Robust edge design and controlled chips for reliable finishing A 1.6 mm corner radius matched with a double‑sided chipbreaker provides a secure cutting edge and effective chip formation for medium‑steel applications. The double‑sided chipbreaker increases usable edges and supports consistent chip segmentation, which reduces the risk of built‑up edge and improves surface finish. The insert includes a cylindrical hole for secure fastening and is produced as part of the ISO turning insert model series, facilitating rapid replacement and indexation. Overall, the geometry and chip control features aim to deliver repeatable component quality and fewer interruptions in production. Contact Metav Werkzeuge for tailored application advice and prompt supply of Tungaloy DNMG150416 T9215 turning inserts Technical Data Article number: 6772248 Manufacturer article number: 6772248 SKU: 6772248-Tungaloy Facts Geometry: DNMG150416 Size: 15 Thickness: 4.76 mm Relief angle: 0° Lead angle: 55° Corner radius: 1.6 mm Special features Grade: T9215, CVD-coated carbide Chipbreaker: double-sided Hole: cylindrical hole Application: turning; suitable for medium steel Model series: ISO turning inserts FAQ What materials is this insert suitable for? The DNMG150416 T9215 insert is formulated for medium‑steel machining; the T9215 CVD‑coated carbide provides wear resistance and toughness suited to continuous and mildly interrupted turning. How does the corner radius affect cutting performance? A 1.6 mm corner radius increases edge strength and enables stable cuts at higher feed rates, which helps to extend tool life and improve process reliability with the DNMG150416 turning insert. Is the geometry compatible with standard holders? Yes. The insert follows ISO DNMG geometry and a 55° lead angle, so compatibility with external holders and boring bars is determined by matching form, relief angle, fastening and size. How does the chipbreaker design benefit production runs? The double‑sided chipbreaker on this grade promotes consistent chip segmentation and reduced built‑up edge, supporting steadier surface finish and fewer interruptions during production with the DNMG150416 T9215 insert. What does the CVD coating provide in daily use? The CVD coating offers improved thermal and abrasive resistance, allowing higher cutting speeds and longer edge life for medium‑steel turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade (T9225), a rhombic 55° geometry and a 1.6 mm corner radius for reliable medium to heavy steel turning; order directly via Metav Werkzeuge or consult the team for compatibility and holder selection. DNMG150416 T9225 Tungaloy turning insert — ISO turning insert for turning The DNMG150416 T9225 Tungaloy insert is an ISO-standard, rhombic turning insert designed for robust medium to heavy steel machining with stable chip formation and reversible use CVD-coated carbide T9225 for robust cuts Rhombic 55° form for versatile turning 1.6 mm corner radius for consistent profile Double-sided with cylindrical hole, 4.76 mm thickness Reliable performance for variable cutting conditions The CVD-coated carbide grade T9225 delivers a balance of wear resistance and toughness suitable for medium to heavy steel machining. The chemical vapour deposition (CVD) layer increases surface hardness and improves resistance to abrasive wear, while the substrate carbide maintains fracture toughness. As a result, the insert shows more consistent life under changing engagement conditions and light interruptions. This combination reduces unscheduled tool changes and supports higher cumulative cutting lengths, improving process stability and machining efficiency for production-focused turning operations. ISO compatibility and secure clamping for quick tool changes The rhombic form with a 55° cutting geometry and a 0° relief angle provides both external and internal turning capability when paired with the correct ISO holder. The plate thickness of 4.76 mm and the cylindrical hole ensure reliable clamping and repeatable positioning; the double-sided design doubles usable edges, offering a cost-effective option for busy shops. Compatibility with a holder is determined by form, free angle, tolerance class, fastening method, size and thickness, so the right combination reduces setup time and simplifies inventory management for indexable tooling systems. Productivity and robust chip control for workshop demands The integrated double-sided chipbreaker and the predictable 1.6 mm corner radius support consistent surface quality and dimensional control when roughing or finishing under tougher conditions. The grade is optimised for stable chip formation across a broad range of steels, giving production teams fewer interruptions and better cycle-time predictability. Selecting this insert as a universal option for stable or slightly interrupted cuts reduces tooling complexity and contributes to lower overall machining cost per component, while still allowing targeted edge choices for specialised tasks. For supply enquiries or detailed advice on holder compatibility for the DNMG150416 T9225 Tungaloy turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 and quote SKU TUN6944727 Technical data Article number: 6944727 SKU: 6944727-Tungaloy Manufacturer SKU: TUN6944727 Brand: Tungaloy Series: ISO turning inserts Material: Carbide Numbers / Core technical data Plate designation: DNMG150416 Size (inscribed circle): 15 mm Thickness: 4.76 mm Relief angle: 0° Cutting angle: 55° Corner radius: 1.6 mm Design / Special features Rhombic plate form Cylindrical hole for clamping Double-sided chipbreaker CVD-coated carbide grade T9225 Suitable for external and internal turning Compatible with ISO holders depending on form and tolerances FAQ Which materials is this insert suitable for? The DNMG150416 T9225 insert is formulated for medium to heavy steel machining, providing stable chip formation and wear resistance suitable for a broad range of steel grades. How does the T9225 grade perform with interrupted cuts? T9225 is a robust, universal grade with enhanced toughness, making it well suited to light interruptions and varying engagement conditions without rapid edge failure. Is the insert reversible and how many cutting edges are available? The insert is double-sided; each side provides usable edges, effectively extending edge life and lowering cost per edge compared with single-edge alternatives. What should be checked for holder compatibility? Compatibility depends on plate form, free angle, tolerance class, fastening method, size and thickness; ensure the holder matches the DNMG150416 geometry and the clamping system is compatible with a cylindrical hole. Can this insert be used for finishing and roughing operations? Yes; the combination of the 1.6 mm corner radius and the double-sided chipbreaker allows for both robust roughing and controlled finishing when cutting parameters are adapted. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 T9225 Wendeplatten - Tungaloy
Take advantage of a robust T9225 CVD-coated carbide grade and a 55° rhombic geometry for consistent medium-to-heavy steel turning; the double-sided chipbreaker and 1.6 mm corner radius improve stability in interrupted cuts and prolong tool life. Order directly via Metav Werkzeuge or consult the technical team for holder compatibility and process optimisation. DNMG150416 T9225 — turning insert, 55° rhombic, Tungaloy DNMG150416 T9225 is an ISO rhombic turning insert designed for medium-to-heavy steel machining where toughness and reliable chip control are required CVD-coated carbide T9225 Universal grade for medium to heavy steel Double-sided chipbreaker for interrupted cuts 55° rhombic form with cylindrical hole Consistent performance where cutting conditions vary The CVD-coated carbide grade T9225 delivers a balance of toughness and wear resistance that suits fluctuating engagement and lightly interrupted cuts. With a 1.6 mm corner radius and a double-sided chipbreaker, the insert provides stable chip formation and reduced edge chipping; the result is fewer tool changes and higher machining uptime. This directly supports predictable cycle times in mixed production runs and lowers overall tooling overhead through extended edge life. Secure clamping and straightforward holder selection Compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness. The rhombic 55° geometry with a cylindrical hole and 4.76 mm plate thickness ensures positive seating in standard ISO clamping systems and consistent repeatability when paired with the appropriate external holder or boring bar. Specifying matching holder geometry and tolerance class minimises vibration and improves surface finish, transforming a good setup into a reliably productive process. Material and coating explained for reliable yields The substrate is carbide with a CVD surface treatment engineered for demanding steel applications. CVD coating enhances hardness and heat resistance at the cutting edge while maintaining core toughness; this combination helps resist flank wear under elevated temperatures and sustained contact. For operators unfamiliar with coating technology, CVD-coated inserts typically offer a favourable compromise between wear resistance and chipping resistance compared with uncoated grades, making them suitable for a wide spread of steels and cutting conditions. Practical applications and process guidance Intended for external and internal turning, the insert excels in operations where interrupted cuts or variable depths of cut are common. When machining medium-to-heavy steel, select feeds and speeds that favour the insert's toughness—moderate cutting speeds and stable clamping reduce thermal shock and improve edge life. The rhombic geometry also allows for positive entry angles in shoulder turning and profile work, while the double-sided chipbreaker helps control stringy chips, thereby improving process safety and machine cleanliness. Contact Metav Werkzeuge for an application review and order support for the Tungaloy DNMG150416 T9225 insert (SKU TUN6781307); technical consultation and prompt dispatch are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6781307 Manufacturer SKU: TUN6781307 SKU: 6781307-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: DNMG150416 Facts Corner radius: 1.6 mm Insert size: 15 mm Plate thickness: 4.76 mm Clearance angle: 0° Geometry angle: 55° Special features Grade: T9225 Material: carbide Coating: CVD-treated Chipbreaker: double-sided Hole: with cylindrical hole Shape: rhombic Application: turning Compatibility: ISO insert holder systems FAQ What materials is this insert suitable for? The DNMG150416 T9225 insert from Tungaloy is formulated for medium-to-heavy steel machining and performs well under variable engagement and lightly interrupted cuts. Does the insert fit standard ISO holders? Yes, the insert follows ISO geometry and seats in compatible external holders and boring bars when form, clearance angle, tolerance class, fixing and thickness are matched. What advantage does the T9225 grade provide? Tungaloy’s T9225 grade combines CVD surface properties with a tough substrate to offer improved wear resistance at elevated temperatures while maintaining chipping resistance for interrupted cuts. How does the double-sided chipbreaker help production? The double-sided chipbreaker on this rhombic insert improves chip control and reduces edge chipping, which leads to fewer tool changes and cleaner machining processes. Which SKU should be referenced when ordering? Reference SKU TUN6781307 or article number 6781307 when enquiring about the DNMG150416 T9225 insert from Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150416 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust wear resistance, ISO compatibility and versatile chip control for reliable medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult our technical team for process optimisation. DNMG 150416 T9225 – indexable insert for turning by Tungaloy DNMG150416 T9225 is an ISO‑standard indexable turning insert designed for medium to heavy steel machining, offering a CVD‑coated carbide grade optimised for variable cutting conditions. CVD-coated carbide grade T9225 For medium to heavy steel turning Rhombic 55° insert, 1.6 mm corner radius Double-sided chipbreaker with cylindrical hole Reliable cutting performance under varying conditions The DNMG150416 T9225 insert delivers consistent results in interrupted and continuous cuts thanks to its CVD‑coated carbide composition and a grade tuned for toughness. The T9225 grade balances wear resistance and fracture toughness, which reduces tool changes and downtime in serial and batch production. For machining operations where cutting conditions can fluctuate—such as variable depths of cut or slight interruptions—the combination of a robust substrate and a protective coating ensures longer service life and predictable tool behaviour, contributing to improved process stability and lower total machining costs. Easy integration with ISO turning holders for fast setup As an ISO‑normed rhombic insert, the component is compatible with a wide range of standard turning holders; compatibility is governed by insert shape, relief angle (0°), tolerance class, clamping method, nominal size (15 mm) and thickness (4.76 mm). The insert’s cylindrical hole supports secure fastening and straightforward indexation, while its double‑sided design provides two usable cutting edges per index, improving tool economy. Clear identification of these parameters enables rapid tool change and repeatable mounting, reducing set‑up time on the shop floor and simplifying inventory management. Coating and geometry that improve tool life and surface finish The CVD coating applied to this carbide insert enhances abrasion resistance at elevated cutting temperatures and helps preserve edge integrity in high mechanical load situations. The rhombic 55° geometry with a 1.6 mm corner radius supports controlled chamfering and robust corner strength, which in turn helps maintain dimensional accuracy and surface quality during heavier cuts. The double‑sided chipbreaker is designed to manage swarf formation in a variety of steels, promoting reliable evacuation of chips and reducing built‑up edge; this translates into fewer interruptions and more consistent part finish. Practical selection and application advice for improved productivity Select the insert grade and chipbreaker according to material, depth of cut and machine rigidity: the T9225 grade is suited to medium‑to‑heavy steel turning where slightly interrupted cuts or variable engagement demand extra toughness. Pair the insert with a suitably rigid holder and ensure correct clamping torque on the fastening screw to avoid movement under load. For finishing passes, reduce feed or corner radius to improve surface texture; for roughing, exploit the grade’s toughness and the double‑sided indexing to extend machining intervals and reduce tooling cost per part. If further process data or cutting parameters are required, Metav Werkzeuge’s technical advisors can provide application‑specific recommendations. For reliable medium‑to‑heavy steel turning with Tungaloy’s T9225 grade, request availability from Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 to discuss integration and cutting parameters. Technical Data Article number: 6781345 Manufacturer SKU: TUN6781345 Item SKU: 6781345-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: DNMG150416 T9225 Tungaloy-Wendeplatte Brand: Tungaloy Specifications Corner radius: 1.6 mm Insert size: 15 mm Thickness: 4.76 mm Relief angle: 0° Cutting angle: 55° Hole: cylindrical hole Features & Compatibility Material: carbide Coating: CVD-coated Grade: T9225 Chipbreaker: double-sided Shape: rhombic Application: turning System: ISO indexable insert compatible with matching holders FAQ What materials is this insert suitable for? The DNMG150416 T9225 insert is intended primarily for steel machining, optimised for medium to heavy cuts where toughness is required. How many cutting edges are available per insert? With its double‑sided design, the insert provides two usable cutting edges per index, enabling rapid re‑indexing and extended tool life. What does the T9225 designation indicate? T9225 identifies the Tungaloy grade and coating concept: a CVD‑coated carbide grade tuned for a balance of wear resistance and toughness in challenging steel turning applications. How is compatibility with holders determined? Compatibility depends on insert shape, relief angle, tolerance class, clamping method, size and thickness; the rhombic ISO form and cylindrical hole ensure standardised mounting with appropriate ISO holders. Can this insert be used for interrupted cuts? Yes, the T9225 grade is specifically engineered to handle slightly interrupted cuts and variable engagement thanks to its enhanced toughness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com