DNMG 150412 T9215 Wendeplatten - Tungaloy
Take advantage of the proven combination of CVD-coated cemented carbide and a 55° rhomboid geometry for reliable, productive turning in medium steels; the double-sided design with a central hole reduces tooling cost per edge and simplifies inventory. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. DNMG 150412 T9215 ISO turning insert for turning by Tungaloy — CVD-coated carbide, 55° rhomboid DNMG150412 T9215 is an ISO-format turning insert designed for external and internal turning in medium steel; the rhomboid shape with a 55° included angle and a 1.2 mm corner radius delivers a balance of strength and finishing capability CVD-coated carbide grade T9215 ISO-standard rhomboid insert 55° geometry Double-sided chipbreaker, with cylindrical hole Suitable for medium steel turning Productivity and wear resistance for medium steel machining The CVD-coated cemented carbide grade T9215 is formulated to combine high wear resistance with good fracture toughness, making it especially well suited to continuous and lightly interrupted cuts in medium steels. The coating reduces flank and crater wear, extending tool life and lowering tooling cost per component. Thanks to the double-sided indexable design, each insert offers multiple effective cutting edges, which supports uninterrupted production and predictable maintenance intervals. Simplified integration with ISO tooling systems As part of the ISO turning insert family, this indexable component matches standard holder geometries so compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness. The system build comprises an ISO insert, a suitable external holder or boring bar, a shim/clamping set and replacement screws, which streamlines stock management and shortens changeover times on the shop floor. The 55° geometry and a 0° relief angle enable secure seating in standard rhomboid holders, while the central cylindrical hole supports positive clamping and repeatable location. Process reliability and chip control for consistent quality The integrated double-sided chipbreaker promotes stable chip formation across a range of feeds and depths, improving surface finish and reducing the risk of edge chipping during slight interruptions. The 1.2 mm corner radius balances edge strength with the ability to produce a fine machined surface, suitable for typical turning tasks in medium steel. Overall, the combination of geometry, grade and chipbreaker design delivers higher productivity with consistent component quality and reduced rework. For application-specific advice or to secure reliable supply of the Tungaloy DNMG150412 T9215 turning insert, contact Metav Werkzeuge for availability and technical support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772241 Item SKU: 6772241-Tungaloy Manufacturer SKU: TUN6772241 Model series: ISO turning inserts Designation: DNMG150412 Manufacturer: Tungaloy Facts Insert size: 15 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Included angle: 55° Central hole: with hole (cylindrical) Special features Grade: T9215 Coating/type: CVD-coated cemented carbide Shape: rhomboid Chipbreaker: double-sided Application: turning (external and internal) Compatibility: ISO insert, external holder or boring bar, shim/clamping set and replacement screws FAQ What materials is this insert designed for? The DNMG150412 T9215 turning insert is primarily specified for medium steel machining, where the CVD-coated cemented carbide T9215 offers a good balance of wear resistance and toughness. How many usable cutting edges does the insert provide? With its double-sided construction and indexable design, the insert provides multiple effective cutting edges; the central cylindrical hole and standard geometry support reliable clamping and repositioning. Which holder types are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the DNMG150412 fits standard rhomboid external holders and boring bars made for ISO-format inserts. What advantages does the T9215 grade offer for production runs? T9215 delivers extended tool life under continuous to slightly interrupted cutting conditions in steel, improving process stability and reducing tool-change frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
Combining the CVD‑coated carbide T9215 with the ISO‑standard DNMG geometry provides high wear resistance and dependable fracture toughness for efficient medium‑steel turning; the rhombic form and 1.2 mm corner radius support stable cutting under continuous to slightly interrupted conditions. Order the DNMG150412 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG150412 T9215 — Turning insert (ISO 150412) by Tungaloy A DNMG150412 T9215 indexable turning insert engineered for medium‑steel machining, offering high wear resistance and robust fracture protection. CVD-coated carbide grade T9215 for medium steels Rhombic DNMG shape, 55° cutting angle Corner radius 1.2 mm, with cylindrical hole Double-sided chipbreaker for stable chip control Longer tool life through advanced coating and substrate The combination of a CVD‑coated surface with a wear‑resistant carbide substrate increases tool life in medium‑steel turning. The chemical vapour deposition layer reduces flank and crater wear while the substrate maintains fracture toughness, permitting higher material removal rates without frequent index changes. This results in lower cost per part and fewer interruptions on the shopfloor, especially in continuous or slightly interrupted cuts where consistent edge integrity is essential. The coating also supports predictable tool‑change intervals, helping to plan production cycles more reliably. Accurate fit and ISO compatibility reduce setup time Compatibility with the toolholder is governed by geometric features such as shape, rake angle, tolerance class, fastening method, size and thickness. The DNMG form (ISO 150412) with a 55° cutting angle and 0° free angle ensures a precise fit in common external holders for turning. Correct matching of insert geometry to the clamping system minimises run‑out and positional error, which in turn reduces scrap rates and setup time. Clear adherence to the ISO specification streamlines tool inventory and simplifies holder selection for repeatable, efficient machining. Stable chip control for improved surface finish and process security The double‑sided chipbreaker design supports consistent chip formation and evacuation, lowering cutting forces and thermal load on the cutting edge. The presence of a cylindrical mounting hole enhances clamping stability in the seat, reducing vibration and contributing to a steadier cutting process. These characteristics combine to produce improved surface quality and reduced risk of built‑up edge, which is particularly valuable in unattended or high‑volume turning applications where process security and part consistency rank high. Application range and machining guidance for best results Designed as a first choice for medium steel machining, the grade balances wear resistance and resistance to chipping, making it suitable for both finishing and more aggressive roughing within its application window. The 1.2 mm corner radius offers a compromise between edge strength and achievable surface finish; increasing depth of cut or feed may call for a larger radius where available. With a plate thickness of 4.76 mm, the insert supports stable clamping and heat dissipation. For optimal performance, select the chipbreaker and grade according to workpiece stability and the cutting conditions—our technical team can advise on parameter windows for speed, feed and depth of cut. Contact Metav Werkzeuge today to discuss optimised insert selections or request a tailored recommendation from our technical consultants, quoting SKU TUN6772275 for rapid assistance Technical Data Manufacturer article number: 6772275 SKU: 6772275-Tungaloy Manufacturer SKU: TUN6772275 Model series: ISO indexable turning inserts Material: carbide Application: Turning Numbers / Core technical data Size: 15 mm Thickness: 4.76 mm Corner radius: 1.2 mm Cutting angle: 55° Rake (free) angle: 0° Mounting: with cylindrical hole Special features Grade: T9215 (CVD‑coated carbide) Shape: rhombic (DNMG) Chipbreaker: double‑sided Hole style: cylindrical hole Suitable for medium steel; continuous to slightly interrupted cuts FAQ What materials is this insert suitable for? The DNMG150412 T9215 insert is primarily intended for medium steel machining; the T9215 grade combines wear resistance with fracture toughness for reliable performance in such materials. How does the T9215 grade perform compared with other grades? Tungaloy’s T9215 grade (CVD‑coated carbide) offers a balanced combination of high wear resistance and chipping resilience, making it a productive choice where uninterrupted cutting and consistent tool life are required. What effect does the 1.2 mm corner radius have on results? A 1.2 mm radius strengthens the cutting edge and increases resistance to fracture under heavier loads, while still enabling satisfactory surface finish in typical turning operations. Is the insert indexable and how many usable edges are there? The rhombic DNMG form is double‑sided and indexable; the chipbreaker arrangement provides multiple usable cutting edges, improving utilisation and cost efficiency. Which mounting characteristics should be checked for compatibility with a holder? Compatibility depends on form, free‑angle, tolerance class, fastening, size and thickness; the DNMG150412 dimensions, 0° rake and cylindrical hole must match the chosen holder’s seat and clamping system. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide T9215, a 55° rhombic geometry and a 1.2 mm corner radius for reliable, high‑productivity turning; order directly via Metav Werkzeuge or request advice from our consultants. DNMG 150412 T9215 Tungaloy indexable insert for turning DNMG150412 T9215 Tungaloy indexable insert for ISO‑conforming turning applications, designed for medium Stahl machining and secure clamping in standard holders. ISO‑standard DNMG shape, 55° rhombic insert CVD‑coated carbide grade T9215 for medium Stahl Double‑sided chipbreaker for productivity Cylindrical hole for secure mounting Productivity through a balanced wear‑resistant grade The CVD‑coated carbide in grade T9215 combines elevated wear resistance with fracture toughness, making it well suited to continuous and slightly interrupted turning operations on medium Stahl. This balance reduces flank wear and extends tool life under stable cutting conditions, which translates into fewer indexings and longer effective machining cycles. The engineered coating also helps maintain cutting edge integrity at elevated cutting speeds, supporting higher throughput without sacrificing component quality. Consistent surface finish and reliable clamping The rhombic DNMG150412 geometry with a 55° cutting angle and a 1.2 mm corner radius delivers a compromise between robust edge strength and a fine surface finish. The insert’s cylindrical hole and 4.76 mm plate thickness ensure repeatable seating and positive clamping in compatible holders, so concentricity and axial run‑out remain stable from one indexing to the next. As a result, component tolerances and finishing operations can be held with greater regularity, reducing rework and inspection time. System compatibility and operational advantages These ISO turning indexable inserts are designed to work within a complete system: insert, compatible external holder or boring bar, shim/clamping set and replacement screws. The double‑sided chipbreaker provides two usable edges per side, improving economy and minimising tool inventory. Compatibility is determined by form, clearance angle (0° free angle), tolerance class, fixing method, size and thickness; selecting the appropriate chip‑forming geometry and insert grade for the workpiece material optimises chip control and cycle time. Contact Metav Werkzeuge today for tailored recommendations on Tungaloy inserts and to order DNMG 150412 T9215 directly — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772278 Manufacturer SKU: TUN6772278 Model series: ISO turning indexable inserts Designation: DNMG150412 Facts Cutting angle: 55° Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 15 mm Clearance (relief) angle: 0° Special features Material: carbide Grade/coating: T9215, CVD‑coated Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double‑sided Application: turning FAQ What materials is this insert suitable for? The DNMG150412 T9215 insert is specified for medium Stahl machining; the T9215 grade provides a combination of wear resistance and toughness optimised for such materials. How does the double‑sided chipbreaker affect economy? A double‑sided chipbreaker offers multiple usable cutting edges, so the DNMG150412 T9215 insert doubles the number of indexings per plate and improves cost efficiency in production. Which holder features are required for compatibility? Compatibility depends on insert form, free angle (0°), tolerance class, fixing method, size and thickness; the cylindrical hole and standard DNMG form ensure secure seating in ISO‑compliant external holders and boring bars. Can the insert handle interrupted cuts? The CVD‑coated T9215 grade is suitable for continuous to lightly interrupted cuts, combining fracture resistance with wear performance for reliable operation under modest interruptions. What is the benefit of the 1.2 mm corner radius? The 1.2 mm corner radius balances edge strength and surface finish, improving edge life while delivering a consistent surface quality on turned components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215 and a 55° rhombic form with 1.2 mm corner radius to secure consistent machining performance and extended tool life; order through Metav Werkzeuge or consult our technical team for selection guidance. DNMG150412 T9215 ISO turning insert (rhombic, 55°, CVD-coated) by Tungaloy The DNMG150412 T9215 is an ISO-standard rhombic indexable insert designed for external and internal turning of medium steels, offering a balance of wear resistance and fracture toughness for continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 55° rhombic geometry with 1.2 mm radius Double-sided with cylindrical hole and 4.76 mm thickness Reliable compatibility for established ISO tool systems The insert is supplied as an ISO turning insert, ensuring straightforward integration into standard holders; compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness, which simplifies replacement planning and inventory management. As an ISO-conforming component, this insert supports predictable seating and clamping behaviour in established toolholders, reducing setup variability. The rhombic 55° geometry provides versatile cutting angles for general turning tasks, while the cylindrical hole supports secure fastening and repeatable positioning on the clamping system. Optimised cutting performance for medium steels Made from CVD-coated carbide in the T9215 grade, the insert combines high wear resistance with impact stability to maintain cutting-edge integrity under production loads. The coating improves resistance to abrasive wear and thermal softening during elevated cutting speeds, which directly contributes to longer effective tool life and fewer tool changes. For machining medium steel, this grade offers a pragmatic compromise between hardness and toughness—suitable for high-productivity environments where consistent surface finish and dimensional control are required. Design choices that increase process reliability A 1.2 mm corner radius provides a balance between strength and form accuracy: it increases edge robustness for roughing passes while still allowing for acceptable profile detail in finishing operations. The plate thickness of 4.76 mm improves stiffness in the tool assembly and reduces the risk of vibration on overhung setups. The double-sided chipbreaker delivers two usable cutting edges per side, supporting cost-effective indexing and predictable chip control. Together, these design elements reduce process pauses and enhance throughput in batch and continuous production. Practical benefits and selection advice Using this insert within a matched tool system helps achieve consistent component quality and lowers overall machining costs through extended service intervals. For applications with occasional interrupted cuts, the T9215 grade offers resistance to edge chipping while preserving an acceptable wear rate. When selecting a holder and operating parameters, match the insert form and 0° clearance specification with the clamping geometry and intended feeds to fully exploit the insert’s capability. For bespoke process parameters or material mixes, technical consultation is recommended to fine-tune cutting data and secure the best balance of productivity and tool life. For application advice or to secure the proven performance of Tungaloy’s T9215 grade, contact Metav Werkzeuge for personalised technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6773952 Manufacturer SKU: TUN6773952 Model series: ISO-Drehwendeschneidplatten Insert designation: DNMG150412 SKU: 6773952-Tungaloy Facts Geometry angle: 55° Corner radius: 1.2 mm Thickness: 4.76 mm Size: 15 Clearance angle: 0° Special features Material: carbide (cemented carbide) Coating/grade: T9215 (CVD-coated) Plate form: rhombic Hole style: cylindrical hole (with hole) Chipbreaker: double-sided Application: turning System: ISO turning inserts FAQ What materials is this insert optimised for? The DNMG150412 T9215 insert is optimised for medium steel machining; its CVD-coated T9215 grade balances wear resistance and toughness for productive turning operations. How does the 1.2 mm corner radius affect machining? A 1.2 mm radius strengthens the cutting edge for roughing and intermittent cuts while still permitting acceptable profile control during finishing passes. Is the insert compatible with standard ISO holders? Yes — as an ISO turning insert, compatibility depends on matching the form, clearance angle, tolerance class, fixing method, size and thickness to the chosen holder. What benefits does the CVD coating provide? The CVD coating improves resistance to abrasive wear and thermal effects at higher cutting speeds, resulting in longer tool life and more consistent surface quality. How many edges are available before indexing? The insert features a double-sided chipbreaker, providing multiple usable cutting edges to extend service life and reduce tool change frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 and the ISO DNMG150412 geometry with a 1.2 mm corner radius for durable, high-productivity medium-steel turning; order directly via Metav Werkzeuge or contact our consultants for application advice. DNMG150412 T9215 Tungaloy turning insert — CVD-coated carbide, 55° rhombic form A DNMG150412 T9215 turning insert designed for medium-steel external and internal turning, offering a balance of wear resistance and fracture toughness for continuous to lightly interrupted cuts. CVD-coated carbide T9215 for high wear resistance 55° rhombic geometry for versatile turning 1.2 mm corner radius for balanced strength and finish Double-sided chipbreaker with cylindrical hole for stability Consistent productivity for medium-steel turning The CVD-coated carbide T9215 grade is engineered to combine wear resistance with fracture toughness, making it a reliable choice where steady productivity is required. The coating reduces abrasive wear while the substrate resists chipping under light interruptions, which translates into longer tool life and fewer insert changes. For production environments this means reduced machine downtime and a predictable replacement rhythm, supporting consistent cycle times and improved overall output. Compatibility and secure clamping for repeatable results The insert follows the ISO rhombic series, so compatibility with a suitable holder depends on form, clearance angle, tolerance class, fastening and thickness. The 55° geometry and cylindrical hole enable secure clamping with standard screws and seats, while the double-sided chipbreaker provides symmetrical performance when the insert is indexed. The 4.76 mm plate thickness and standard 15 mm size ensure mechanical stability; these geometric choices support accurate positioning, reduced vibration and steady dimensional control on turned components. Easier selection and dependable surface quality Choosing the correct chipbreaker and the 1.2 mm corner radius delivers two clear benefits: robust edge strength for roughing passes and a controlled surface finish for finishing cuts. The rhombic shape with a 0° clearance suits a wide range of turning operations, from facing to profiling, and the dual-sided design makes inventory management more efficient. For shops seeking pragmatic solutions, this insert simplifies tooling decisions while maintaining the balance between productivity and component quality. For enquiry and ordering of Tungaloy inserts in grade T9215, contact Metav Werkzeuge for technical support and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772232 Manufacturer SKU: TUN6772232 SKU: 6772232-Tungaloy Designation: DNMG150412 T9215 turning insert Dimensions & geometry Corner radius: 1.2 mm Approach angle: 55° Plate thickness: 4.76 mm Plate size: 15 mm Clearance angle: 0° Special features CVD-coated carbide T9215 Rhombic plate shape Double-sided chipbreaker Hole: cylindrical ISO turning insert series Application: turning (external and internal) FAQ What materials is this insert best suited for? This insert is optimised for medium steel machining; the CVD-coated T9215 grade offers the wear resistance and toughness expected for productive steel turning operations. Can the insert be used for interrupted cuts? Yes, the carbide substrate combined with the T9215 coating provides good resistance to light interruptions while maintaining stable cutting performance. How does the chipbreaker affect performance? The double-sided chipbreaker controls chip formation for reliable evacuation and consistent surface finish; it is suitable for both continuous and lightly interrupted cuts. Is the DNMG150412 compatible with standard holders? The DNMG150412 form follows ISO dimensions; compatibility depends on holder form, fastening method and tolerance class—secure clamping is ensured by the cylindrical hole and standard screw fixation. What does the 1.2 mm corner radius mean for component finish? A 1.2 mm corner radius provides a compromise between edge strength and surface quality: it resists chipping on roughing passes while enabling a good finish on semi-finish operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide (T9215) for high wear resistance, the 55° rhombic geometry for stable cutting forces and the 1.2 mm corner radius for durable edge life in medium-steel turning; order the DNMG150412 T9215 insert directly via Metav Werkzeuge or ask our consultants for compatibility and application advice. DNMG150412 T9215 indexable turning insert — CVD-coated carbide, 55° rhombic, 1.2 mm radius (Tungaloy) The DNMG150412 T9215 is an ISO-format indexable insert engineered for turning applications, offering a balance of wear resistance and fracture toughness suited to medium-steel external and internal turning. CVD-coated carbide grade T9215 Rhombic 55° geometry 1.2 mm corner radius Double-sided with cylindrical hole Productive turning for medium steel with predictable tool life This insert is built around a CVD-coated carbide substrate that combines surface hardness with a resilient substrate to resist both abrasive wear and edge chipping. As a result, machining cycles in medium steel become more consistent, reducing unplanned tool changes and improving uptime. The T9215 grade is formulated to support continuous to mildly interrupted cutting, so throughput is maintained while component tolerances remain stable. By choosing a coated carbide insert rather than a coated high-speed option, the process benefits from a favourable balance of wear resistance and fracture toughness, which is especially relevant for production environments where repeatability matters. Secure clamping and ISO compatibility for straightforward integration Compatibility with toolholders depends on geometric factors such as form, clearance angle and thickness; the ISO designation ensures the insert fits holders sized for DNMG150412 geometry. The 55° rhombic shape delivers a controllable cutting direction and good access in shoulder and profile work, while the cylindrical hole enables positive seating and repeatable clamping. Specifying this ISO insert simplifies tool provisioning because it adheres to established standards; maintenance teams can verify holder fit by checking form, free angle, tolerance class, fastening method, size and thickness before mounting. This clarity shortens setup time and reduces the risk of mismatch in the workshop. Durable edge life and consistent surface finish for serial production The combination of geometry and coating leads to extended effective cutting life: a 1.2 mm corner radius spreads cutting loads and improves edge stability, which helps to maintain surface finish over longer tool life. The double-sided design provides two usable cutting edges per index, enhancing cost-efficiency and making replacements quicker on the shop floor. For machinists requiring predictable batch quality, the insert’s design supports repeatable surface integrity and dimensional control, reducing rework and supporting higher first-pass yield in serial production. Contact Metav Werkzeuge for tailored advice on holder compatibility and application-specific recommendations for this Tungaloy insert; our consultants can confirm suitability for the intended turning task. Technical data Article number: 6772261 Manufacturer's SKU: TUN6772261 SKU: 6772261-Tungaloy Brand: Tungaloy Facts Insert designation: DNMG150412 Grade / coating: T9215 (CVD-coated carbide) Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 15 mm Wedge angle: 55° Free clearance angle: 0° Special features Rhombic indexable insert Double-sided chipbreaker Cylindrical hole for positive seating ISO-format turning insert series Suitable for turning (external and internal) Compatibility depends on form, free angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The DNMG150412 T9215 insert is optimised for medium steel machining; the T9215 CVD-coated carbide combines wear resistance and toughness for continuous to lightly interrupted cuts. How does the 55° rhombic geometry affect cutting performance? A 55° rhombic geometry provides good access for profiling and shoulder cuts while controlling cutting forces, which helps to improve stability and surface finish when using the DNMG150412 insert. Can the insert be used with any DNMG holder? The ISO designation DNMG150412 ensures broad compatibility, but seating depends on holder form, free angle, tolerance class and fastening; verify these parameters against the holder before fitting. What are the practical benefits of the double-sided design? Double-sided construction doubles the available cutting edges, improving cost efficiency and shortening downtime by allowing a quick index change when one edge is worn. Is the T9215 coating suitable for interrupted cuts? The T9215 CVD-coated carbide is formulated for high productivity in continuous to mildly interrupted cutting; heavy interruptions may require a different grade or geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, robust geometry and easy integration into ISO-based tool systems for efficient medium-steel turning. Order the insert directly via Metav Werkzeuge or consult our application specialists for selection and clamping advice. DNMG150412 T9215 Turning Insert – CVD-coated carbide, 55° rhombic (Tungaloy) The DNMG150412 T9215 is an ISO-standard indexable turning insert designed for external and internal turning, offering a balance of wear resistance and fracture toughness for productive medium-steel machining. CVD-coated carbide grade T9215 55° rhombic shape with 1.2 mm corner radius Double-sided design with cylindrical hole 4.76 mm plate thickness for stable clamping Consistent productivity for medium-steel turning The CVD-coated carbide composition of this insert, grade T9215, is engineered to deliver high productivity in continuous to slightly interrupted cuts. The coating improves abrasion resistance and heat tolerance, which translates into longer tool life and fewer indexings. Specified as an ISO-standard indexable plate, the insert supports stable machining cycles and reliable chip control under typical workshop conditions, reducing unplanned downtime and improving throughput. Geometry that ensures stable cutting and surface quality The 55° rhombic form combined with a 1.2 mm corner radius provides a compromise between strength and finish quality: the smaller nose radius supports a better surface on light finishing passes, while the robust geometry resists edge chipping during heavier cuts. The rhombic outline and double-sided construction mean economical use of the insert, while the cylindrical hole and 4.76 mm plate thickness ensure repeatable clamping and vibration damping in the toolholder, improving dimensional consistency across production runs. System compatibility and practical assembly guidance As an ISO-conforming plate, compatibility with the holder depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness. The recommended system comprises the insert, a matching external holder or boring bar, a shim or clamping set, and replacement screws. Selecting the correct chipbreaker and grade for the workpiece material and machining stability is essential; for medium steels the T9215 grade typically balances wear resistance and fracture safety to support continuous production. Operational benefits and economical machining Using this indexable plate reduces overall tooling costs by extending time between replacements and by enabling predictable performance across batches. The carbide substrate with CVD-coated surface supports consistent edge life and steady chip formation, which simplifies downstream operations such as part cleaning and inspection. For shops targeting low variation and repeatability, the technical specifications of the insert contribute to fewer process interruptions and improved part quality. For application-specific advice on Tungaloy turning inserts and to ensure optimal holder compatibility, contact Metav Werkzeuge – info@metav-werkzeuge.com, tel +49 2822 7131930, and request support for the DNMG150412 T9215 insert. Technical data Article number: 6772253 Manufacturer SKU: TUN6772253 SKU: 6772253-Tungaloy Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Size: 15 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Angle: 55° Clearance angle: 0° Manufacturer article number: 6772253 Special features / Designs Material: carbide Coating: CVD-coated Plate shape: rhombic Hole: with hole, cylindrical hole Chipbreaker: double-sided Typical application: external and internal turning Performance: suited for continuous to light interrupted cuts FAQ What materials is this insert intended for? The DNMG150412 T9215 turning insert by Tungaloy is intended primarily for medium steel machining and offers a balance of wear resistance and fracture toughness for such applications. How does the T9215 grade affect tool life? The T9215 CVD-coated carbide grade enhances wear resistance and heat tolerance, which typically extends the service life of the insert under continuous or lightly interrupted turning of medium steels. Is the insert reversible and how many edges are available? This is a double-sided indexable insert; each side provides usable cutting edges according to the ISO geometry, enabling economical edge changes without regrinding. What should be considered for holder compatibility? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; ensure the toolholder matches the ISO designation and 4.76 mm plate thickness for correct clamping of the DNMG150412 T9215. Can this insert be used for interrupted cuts? Yes, the DNMG150412 T9215 is suitable for continuous to light interrupted cuts in medium steels, offering a compromise between toughness and wear resistance for those conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide and a 1.2 mm corner radius for high wear resistance and secure edge life; the 55° lead angle further supports versatile turning operations. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. DNMG 150412 T9215 — Turning insert by Tungaloy (CVD-coated carbide, 55°) The DNMG150412 T9215 Tungaloy insert is an ISO-indexable turning insert designed for medium steel machining and suited to both external and internal turning applications. ISO-indexable rhombic DNMG insert T9215 CVD-coated carbide grade Double-sided chipbreaker for medium steel 1.2 mm corner radius with 55° angle High productivity with consistent wear resistance The CVD-coated carbide grade T9215 combines elevated wear resistance with fracture toughness, making this indexable cutting geometry ideal for medium steel turning under continuous to lightly interrupted cuts. The coating enhances tool life by resisting abrasive wear, while the substrate maintains edge strength. As a result, machining cycles run longer between indexings, reducing downtime and contributing to a more predictable production rhythm. This balance of hardness and toughness supports higher cutting speeds where process stability is required. Precise geometry for controlled chip formation and surface finish The rhombic form with a 1.2 mm corner radius and double-sided chipbreaker provides reliable chip control and a consistent surface quality on turned components. The corner radius increases the effective cutting edge cross-section, improving resistance to chipping, while the chipbreaker geometry shapes swarf for safer evacuation. For users less familiar with insert nomenclature: the corner radius affects both finish and strength—larger radii improve edge robustness but can slightly increase cutting forces; the chosen radius here supports a strong compromise between finish and durability. Designed for ISO-system compatibility and easy integration Compatibility with holders is governed by factors such as form, relief angle, tolerance class, fastening method, size and thickness; the insert fits ISO-standard tools when those parameters match. Typical system build comprises the ISO-indexable plate, a matched external holder or boring bar, an underlay/clamp set and replacement screws as required. This approach enables quick index changes and straightforward spare-part management on the shop floor, reducing setup time and helping to maintain throughput on multi-shift production lines. Application focus and recommended use Engineered specifically for turning, the grade performs best in medium steel machining, offering productive cutting in continuous and lightly interrupted operations. The durable substrate and CVD coating make it suitable where a stable process and consistent part tolerances are priorities. Choose the double-sided configuration to maximise usable edges per insert; select a matching chipbreaker and grade with regard to workpiece material, machining strategy and fixture stability to unlock the full benefit of the insert. Contact Metav Werkzeuge for tailored application support on Tungaloy turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and compatibility checks. Technical data Article number: 6772236 Manufacturer SKU: TUN6772236 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Facts Size: 15 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Lead angle: 55° Relief angle: 0° Special features CVD-coated carbide (T9215) Rhombic plate form (DNMG) Double-sided chipbreaker Cylindrical hole for secure fastening Suitable for external and internal turning System composition: ISO insert, matched holder or boring bar, underlay/clamp set, spare screws FAQ What materials is this insert best suited for? The DNMG150412 T9215 insert is optimised for medium steel machining; the T9215 CVD-coated carbide is selected to balance wear resistance and toughness for productive turning. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength and improves resistance to chipping, helping to maintain surface finish and extend the interval between indexings when using the DNMG insert. Is the insert compatible with standard ISO holders? Compatibility depends on matching form, relief angle, tolerance class, fastening method, size and thickness; when holders meet these ISO parameters, the insert integrates into standard turning systems. Can this insert be used for interrupted cuts? The T9215 grade and the insert geometry are suitable for continuous to lightly interrupted cuts; more severe interruptions require evaluation of fixture stability and cutting conditions. What chip control can be expected from the chipbreaker? The double-sided chipbreaker delivers consistent swarf formation and evacuation, supporting safer machining and stable surface quality in turning operations using this indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance and breakage safety in an ISO‑compliant design to keep turning processes productive and predictable; order the insert directly via Metav Werkzeuge or consult our specialists for application support. DNMG 150412 T9215 — Tungaloy turning insert for turning DNMG150412 T9215 is an ISO‑standard rhombic turning insert developed for external and internal turning, offering a double‑sided chipbreaker and a cylindrical hole for secure mounting. ISO rhombic insert DNMG 150412 CVD‑coated cemented carbide grade T9215 Double‑sided chipbreaker, cylindrical hole Suited for medium steel, high productivity Precision and process reliability for turning operations The ISO‑compliant geometry of this indexable plate ensures repeatable results when paired with matching holders and clamping sets. The DNMG150412 designation denotes the standardised rhombic format and dimensions, which simplifies tool selection across different machines and setups. Combined with a defined corner radius and plate thickness, the insert contributes to stable cutting conditions and consistent component tolerances, supporting efficient machining sequences and reduced scrap rates. High productivity through material and coating technology The cemented carbide substrate with a CVD‑coating in grade T9215 is formulated for balanced performance in medium steel. This composition delivers both wear resistance and breakage safety, enabling elevated cutting speeds and extended tool life under continuous to slightly interrupted cuts. The coating reduces flank wear and helps maintain cutting edge integrity, translating into longer intervals between indexings and fewer tool changes on the shop floor. Geometry that supports versatile cutting strategies The plate features a rhombic form with a 55° included angle and a 1.2 mm corner radius, combined with a 0° clearance angle for predictable engagement in both roughing and finishing passes. The cylindrical hole and double‑sided layout allow economical indexing and straightforward fixation. These geometric characteristics make the insert suitable for a wide range of turning tasks while permitting simple adaptation of cut depth and feed to match required surface finish and dimensional accuracy. Application guidance and compatibility considerations Designed for external and internal turning, the insert performs best when the chipbreaker style and grade are matched to the workpiece material and stability of the setup. For medium steel applications the T9215 grade provides a reliable compromise between productivity and tool life; different chipformers or grades should be selected for non‑ferrous materials or hardened steels. Compatibility with a toolholder depends on form, clearance, tolerance class, fastening method, size and thickness — consult technical documentation or our specialists for holder recommendations to achieve optimal cutting conditions. For tailored advice on integrating Tungaloy inserts into production, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder selection and process parameters. Technical data Article number: 6796034 Manufacturer SKU: TUN6796034 SKU: 6796034-Tungaloy Product designation: DNMG150412 T9215 Tungaloy turning insert Facts Size: 15 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Included angle: 55° Hole style: cylindrical hole Special features CVD‑coated cemented carbide grade T9215 Double‑sided chipbreaker ISO‑compliant rhombic insert Suitable for external and internal turning Optimised for medium steel, continuous to slightly interrupted cuts Compatibility determined by form, clearance, tolerance class, fastening, size and thickness Model series: ISO turning inserts FAQ What materials is this insert optimised for? The T9215 grade is optimised for medium steel applications; the DNMG150412 insert offers a balance of wear resistance and fracture toughness for productive steel turning. Can this insert be used for internal turning? Yes, the rhombic geometry and defined corner radius allow the insert to be used for both external and internal turning operations. How does the CVD coating affect performance? The CVD‑coated surface improves wear resistance and cutting edge stability on the DNMG150412 insert, enabling higher cutting speeds and longer tool life in suitable applications. What should be checked for holder compatibility? Compatibility requires matching the insert form, clearance angle, tolerance class, fastening method, size and thickness; ensure the holder accepts DNMG‑format plates with a cylindrical hole. Is the insert indexable and economical to use? Yes, the double‑sided design permits multiple indexings, reducing tooling cost per cutting edge and increasing overall process economy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
Take advantage of high wear resistance and reliable fracture toughness for consistent throughput in medium steel turning. The combination of CVD-coated carbide and a double-sided chipbreaker ensures productive machining with stable chip control. Order directly from Metav Werkzeuge or contact our specialists for compatibility advice. DNMG150412 T9215 – ISO turning insert for medium steel, rhombic 55° by Tungaloy DNMG150412 T9215 is an ISO-standard indexable turning insert designed for external and internal turning in medium steel; compatible with holders that match the form, clearance, tolerance and thickness. CVD-coated carbide for high wear resistance 55° rhombic geometry for versatile turning Double-sided chipbreaker for reliable chip control Boosted productivity for medium steel turning The T9215 grade is a CVD-coated carbide formulated to balance wear resistance and fracture toughness, making it a preferred choice for medium steel machining. This composition allows longer tool life under continuous to slightly interrupted cuts, reducing tool changes and downtime. The coating process deposits hard ceramic layers that protect the cutting edge from abrasion while the substrate maintains toughness, which together enable higher material removal rates and steady production outputs. Stable clamping and consistent surface finish The 55° rhombic geometry with a 1.2 mm corner radius provides versatility across common external and internal turning applications while supporting good surface integrity. The insert’s cylindrical locating hole and standard ISO form ensure secure positioning in compliant holders; combined with a 4.76 mm plate thickness, this design promotes rigidity and repeatable seating. As a result, shops achieve reliable dimensional accuracy and reduced chatter, which improves first-pass yields and downstream process stability. Practical application and process guidance Equipped with a double-sided chipbreaker, the insert delivers controlled chip formation for a broad range of feeds and depths of cut typical in medium steel operations. The insert is part of an ISO insert system that requires matching holder geometry, clearance angle and tolerance class for optimal performance. Select the chipbreaker and grade to suit component stability and machining method; when set up correctly, the system reduces manual intervention and supports continuous production cycles with consistent tool life. For robust, production‑oriented turning choose Tungaloy grade T9215—contact Metav Werkzeuge for application support, technical details or to request full specifications via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6772273 Manufacturer SKU: TUN6772273 SKU: 6772273-Tungaloy ISO designation: 150412 Numbers / Core technical data Geometry angle: 55° Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 15 mm Designs / Special features Material: carbide Coating / grade: CVD-coated carbide (T9215) Shape: rhombic Chipbreaker: double-sided Mounting: with cylindrical hole Typical use: external and internal turning FAQ What materials is this insert suited for? The Tungaloy DNMG150412 T9215 insert is specifically aimed at medium steel machining and combines CVD-coated carbide properties to handle typical steels with good wear resistance and toughness. Is the DNMG150412 compatible with all ISO holders? Compatibility depends on matching the holder’s form, clearance angle, tolerance class, size and thickness; the insert’s rhombic 55° form and cylindrical hole fit standard ISO seats when the holder is specified for DNMG geometry. How does the chipbreaker affect production? The built-in double-sided chipbreaker provides controlled chip formation across a range of feeds, improving chip evacuation and reducing the risk of re-cutting, which supports more stable and productive machining cycles. Can this insert be used for interrupted cuts? Yes; the combination of T9215 grade and the carbide substrate offers fracture resistance suitable for continuous to lightly interrupted cuts typical in many turning operations. What are the key dimensional references to check before ordering? Verify the ISO code (150412), plate size (15 mm), plate thickness (4.76 mm), corner radius (1.2 mm) and the 55° geometry to ensure proper fit and performance in the intended holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215 wear resistance and fracture toughness with the ISO‑standard DNMG150412 form for reliable medium‑steel turning; the double‑sided, rhombic design and precise dimensions enable consistent productivity. Order the insert directly via Metav Werkzeuge or consult the team for application recommendations. DNMG150412 T9215 CVD‑coated carbide turning insert (55°) — Tungaloy The DNMG150412 T9215 is an ISO rhombic indexable insert engineered for medium‑steel external and internal turning applications, offering robust performance in continuous to lightly interrupted cuts CVD‑coated T9215 for medium steel Rhombic DNMG shape, 55° cutting angle Double‑sided insert with 1.2 mm radius Compatible with ISO turning toolholders Consistent productivity for medium‑steel turning The rhombic DNMG geometry with a 55° cutting angle delivers a reliable cutting edge for both external and internal turning tasks. The CVD‑coated carbide grade T9215 is formulated to balance wear resistance and fracture toughness, which helps maintain tool life under steady cutting conditions. For production environments where cycle time and part quality matter, this insert reduces downtime through predictable performance and repeatable edge life. How the coating and substrate benefit machining efficiency A CVD‑coating on a carbide substrate protects the cutting edge at elevated temperatures and reduces abrasive wear, extending usable life compared with uncoated grades. The T9215 grade is optimised for medium‑strength steel, enabling higher productivity without compromising surface finish. The double‑sided design and indexed edges mean two usable cutting corners per side, improving cost efficiency per edge and simplifying inventory management for frequent turning operations. Practical compatibility and handling in the workshop Compatibility with a holder depends on form, clearance angle 0°, tolerance class, fixation method, size and thickness. The insert has an inscribed size of 15, a thickness of 4.76 mm and a corner radius of 1.2 mm, and is supplied with a cylindrical hole for secure clamping. A typical system comprises an ISO‑compatible turning holder, a support shim or clamping kit, and replacement screws. Selecting the correct chipbreaker and grade ensures optimal chip control for continuous to lightly interrupted cuts and reduces the risk of edge chipping. Choosing the right cutting geometry and grade The DNMG150412 form suits a wide range of turning operations; choose a chipbreaker matching the material and feed conditions. For medium‑steel workpieces, the T9215 grade is the first choice where a compromise between long tool life and resistance to mechanical shock is required. When facing more aggressive interruptions or harder materials, consider alternative grades or geometries; for standard production of shafts, journals and turned components, this insert provides a dependable balance of life and performance. Contact Metav Werkzeuge to discuss suitability for specific turning tasks, request further technical data for the DNMG150412 T9215 insert or place an order with tailored machining advice Technical data Article number: 6772269 Manufacturer SKU: TUN6772269 Shop SKU: 6772269-Tungaloy Article name: DNMG150412 T9215 Tungaloy turning insert Series: ISO turning inserts Application: Turning Numbers / Core technical data Insert size: 15 Thickness: 4.76 mm Corner radius: 1.2 mm Cutting angle: 55° Clearance angle: 0° Manufacturer article number: 6772269 Design / Special features Material: carbide Grade/coating: T9215 CVD‑coated Shape: rhombic (DNMG) Hole: with hole — cylindrical hole Chipbreaker: double‑sided Indexable, two usable cutting edges per side Compatible with ISO toolholders Suitable for continuous to light interrupted cut FAQ What materials is this insert designed for? The DNMG150412 T9215 insert is designed primarily for medium‑strength steel; the T9215 CVD‑coated carbide combines wear resistance and toughness for such applications. Can the insert be used for internal and external turning? Yes — the rhombic DNMG shape and 55° cutting angle make the insert suitable for both external and internal turning operations. How does the hole style affect clamping? The cylindrical hole provides precise centring and stable clamping in ISO‑compatible holders; DNMG150412’s hole style ensures repeatable fixation in the toolholder. Is the chip control suitable for interrupted cuts? The double‑sided chipbreaker is intended to perform well in continuous to light interrupted cuts; for heavy interruptions, a specialised geometry may be preferred over the standard chipbreaker. Which dimensions should be checked for holder compatibility? Check the insert’s size (15), thickness (4.76 mm), corner radius (1.2 mm), clearance angle (0°) and hole form; these determine mechanical fit and correct seating in the holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide wear resistance and a rhombic 55° geometry ensures high productivity and reliable edge life in medium steel turning; order the DNMG150412 T9215 insert directly via Metav Werkzeuge or ask our consultants if needed. DNMG 150412 T9215 Turning Insert, 55° (Tungaloy) DNMG150412 T9215 is an ISO rhombic, two-sided indexable insert designed for productive turning in medium steel applications, featuring a 1.2 mm corner radius and a cylindrical hole for secure clamping. CVD-coated carbide for high wear resistance 55° rhombic geometry for stable cutting 1.2 mm corner radius for consistent edge life Two-sided design with cylindrical hole for secure clamping Maximise output with wear-resistant CVD-coated carbide The T9215 grade is a CVD-coated carbide engineered for the demands of medium steel machining, balancing wear resistance with fracture toughness to support continuous and slightly interrupted cuts. This pays off as longer tool life and fewer indexings, which directly reduces machine downtime and tool-change cycles. The result is measurable productivity gains: more reliable cutting performance under sustained load and stable material removal rates that help maintain process efficiency. Better surface quality and reliable chip control for fewer interruptions The rhombic 55° geometry combined with a double-sided chipbreaker provides controlled chip formation and consistent cutting forces, promoting an improved surface finish and reduced vibration. Stable chip control means less manual intervention at the machine and lower risk of rework. Thanks to the 1.2 mm corner radius, edge strength is enhanced, delivering repeatable dimensional accuracy and a smoother interaction between insert and workpiece during finishing passes. ISO compatibility and secure clamping for process security As an ISO-designated insert, the DNMG150412 fits holders that match form, relief angle, tolerance class, fastening style, size and thickness, simplifying integration into existing tool systems. The cylindrical hole ensures positive fixation with standard clamping sets and replacement screws, reducing the chance of seating errors. When selecting a holder, choose one that matches the rhombic seat and the specified 0° relief angle to retain repeatable positioning and maintain cutting stability across batches. Practical advantages for shop-floor implementation The two-sided, indexable design reduces tooling cost per cutting edge while offering redundancy for uninterrupted production. The insert’s combination of CVD coating and grade composition makes it suitable as a first choice for medium steel, supporting higher cutting speeds where process stability allows. Integration is straightforward: match the ISO code and insert dimensions to the holder, select the chipbreaker and grade for the workpiece and stability, and monitor cutting data to exploit the insert’s performance potential. For tailored tooling advice or to secure DNMG 150412 T9215 inserts from Metav Werkzeuge, contact our specialists via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application-specific recommendations Technical data Article number: 6774116 Manufacturer SKU: TUN6774116 SKU: 6774116-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.2 mm Relief angle: 0° Inscribed circle size: 15 mm Plate thickness: 4.76 mm Approach angle: 55° Special features Grade: T9215 (CVD-coated carbide) Shape: rhombic (DNMG) Chipbreaker: double-sided Hole: with cylindrical hole Application: turning Material: carbide ISO designation: 150412 FAQ What materials is this insert optimised for? The DNMG150412 T9215 indexable insert is optimised for medium steel machining; the T9215 grade delivers a balance of wear resistance and fracture toughness suited to continuous and slightly interrupted cuts. How does the 55° rhombic geometry affect cutting? The 55° rhombic geometry provides stable cutting forces and good surface finish characteristics; combined with the double-sided chipbreaker, it improves chip control and reduces vibration during turning operations. Is the insert compatible with standard ISO holders? Yes — the DNMG150412 follows ISO dimensions, so compatibility depends on matching form, relief angle, tolerance class, fastening, size and thickness to the holder for secure clamping. What clamping method is required for this insert? The insert has a cylindrical hole for positive fixation; use the appropriate clamping set and replacement screws designed for DNMG inserts to ensure secure mounting and repeatable positioning. Can the DNMG150412 T9215 be used for interrupted cuts? The T9215 grade is suitable for continuous to lightly interrupted cuts due to its combination of wear resistance and toughness, making it a reliable choice for many shop-floor turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9215 grade and the ISO DNMG form to increase throughput and tool life; the combination of high wear resistance and stable chip formation supports productive medium-steel turning. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG 150412 T9215 – DNMG turning insert for turning, Tungaloy The DNMG150412 T9215 is an ISO-standard rhombic turning insert optimised for medium-steel turning, offering high wear resistance and good fracture toughness for continuous to light interrupted cuts. CVD-coated carbide T9215 grade ISO DNMG rhombic geometry Corner radius 1.2 mm for strength Double-sided chipbreaker design Cylindrical locating hole for clamping Boosted productivity through wear-resistant coating and grade The combination of CVD-coated carbide and the T9215 grade delivers a reliable balance between wear resistance and edge toughness, making it a consistent choice for higher-volume turning operations. This coating technology protects the substrate against abrasive wear while maintaining the cutting-edge integrity required for sustained production. As a result, cycle times remain stable and tool-change intervals extend, supporting improved overall equipment effectiveness and predictable throughput. Clear guidance on holder compatibility and mounting Compatibility is determined by insert form, relief angle, tolerance class, clamping method, size and thickness. The rhombic ISO DNMG form with a specified relief angle of 0°, an insert thickness of 4.76 mm and a cylindrical locating hole requires a matching external holder or boring bar with corresponding geometry and clamping provisions. Correct pairing reduces vibration and ensures repeatable seating, which in turn sustains surface finish and tool life. When selecting a holder, prefer one that matches the tolerance class and clamping style to exploit the insert's properties. Practical advantages in machining and recommended application The 1.2 mm corner radius increases edge strength and helps to stabilise the cutting process on medium steels, favouring both external and internal turning tasks. The double-sided chipbreaker contributes to controlled chip formation and stable evacuation under varying depths of cut, improving surface quality while lowering the risk of built-up edge. System assembly typically comprises the ISO insert, a matching holder or boring bar, a backing shim or clamp set and the appropriate fastening screws; attention to clamping torque and seat cleanliness ensures optimal performance. This insert performs best in continuous to light interrupted cuts and is particularly suited where a balance between productivity and predictable wear is required. For high-productivity medium-steel turning with the CVD-coated T9215 grade from Tungaloy, contact Metav Werkzeuge for tailored advice and fast availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6796074 Manufacturer SKU: TUN6796074 Designation: DNMG150412 Brand: Tungaloy Facts Corner radius: 1.2 mm Relief angle: 0° Insert thickness: 4.76 mm Insert size: 15 mm Wedge angle: 55° Special features Double-sided chipbreaker CVD-coated carbide (T9215) ISO rhombic form DNMG Cylindrical locating hole Intended use: turning Suitable for continuous to light interrupted cuts FAQ What materials is this insert designed for? The DNMG150412 T9215 insert is optimised for medium steel turning; the T9215 grade provides abrasion resistance and toughness for a wide range of steel alloys. Is the insert indexable and reversible? Yes, the insert is double-sided with a rhombic geometry, allowing indexation to present a fresh cutting edge when required. What does the T9215 designation indicate? T9215 denotes a CVD-coated carbide grade tailored for medium-steel applications, combining high wear resistance with good fracture toughness for productive machining. Which holder characteristics must match the insert? Holders must match the ISO DNMG form, the relief angle (0°), tolerance class, clamping method, size and thickness; the cylindrical locating hole requires a compatible clamping arrangement. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength, improving stability and enhancing surface finish under moderate cutting conditions. Can this insert be used for interrupted cuts? The grade is suitable for continuous to light interrupted cuts; for heavy interruptions, select a grade or geometry specifically validated for more severe shock loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
Benefit from a combination of high wear resistance, fracture toughness and ISO compatibility to maintain steady production in medium steel turning. Order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and cutting data. DNMG 150412 T9215 — Turning insert (ISO DNMG150412) by Tungaloy DNMG150412 T9215 is an ISO‑standard rhombic turning insert designed for productive external and internal turning in medium steel applications. CVD‑coated carbide grade T9215 Optimised for medium steel machining 55° rhombic geometry, 1.2 mm corner radius Double‑sided chipbreaker, cylindrical hole Boosted productivity through material and coating The combination of a CVD‑coated carbide substrate and the T9215 grade delivers a reliable balance of wear resistance and toughness for continuous to slightly interrupted cuts. The coating reduces flank wear and extends tool life under stable cutting conditions, which translates into fewer insert changes and higher machine uptime. For production environments the result is a measurable increase in throughput while retaining surface quality on steel components. Stable geometry for predictable cutting performance The 55° rhombic geometry with a 1.2 mm corner radius supports robust engagement during turning operations and helps absorb shock loads at entry points. The double‑sided chipbreaker is designed to form and control chips consistently, improving evacuation in both external and internal profiles. The 0° clearance angle and standardised ISO shape ensure repeatable seating and clamping accuracy when paired with compatible ISO holders, reducing set‑up time and variation between batches. Simple integration with ISO tool systems This indexable insert is produced to ISO dimensions, compatible by form, clearance, tolerance grade, fastening and thickness with standard turning holders and boring bars. The cylindrical hole and standard thickness of 4.76 mm permit secure fastening and straightforward replacement of worn inserts without additional machining of the holder. Specifying ISO‑compliant components simplifies inventory management and ensures interchangeability across machines and workshops. Grade selection and application guidance The T9215 grade is recommended as a first choice for medium steel machining, combining resistance to abrasive wear with reduced risk of chipping. When selecting this insert, match the chipbreaker and grade to workpiece material, machining stability and desired surface finish. For heavier interrupted cuts or hard inclusions, consider adapting cutting parameters or choosing a more fracture‑resistant grade; for fine finishing, reduce feed and maintain appropriate cutting speed to benefit from the coating's wear characteristics. Contact Metav Werkzeuge for tailored cutting data, holder matching and stock availability — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930 — request the DNMG 150412 T9215 insert and application advice from Metav Werkzeuge Technical data Article number: 6772247 Manufacturer SKU: TUN6772247 SKU: 6772247-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: carbide Grade: T9215 Manufacturer: Tungaloy Specifications Insert designation: DNMG150412 Included angle: 55° Corner radius: 1.2 mm Plate thickness: 4.76 mm Inscribed circle/size: 15 mm Clearance angle: 0° Features & compatibility Coating: CVD coating Chipbreaker: double‑sided Hole: with cylindrical hole Plate form: rhombic Application: Turning (external and internal) Typical use: medium steel machining System: ISO‑standard insert for ISO holders and boring bars FAQ What materials is this insert suited for? The DNMG150412 T9215 insert is designed primarily for medium steel machining and is optimised to combine wear resistance with fracture toughness for productive turning. How does the T9215 grade affect tool life? The T9215 CVD coating improves resistance to abrasive wear while maintaining a tough substrate, which increases life under continuous or lightly interrupted cutting conditions. Which holder types are compatible with the insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and insert thickness; the insert follows ISO dimensions and fits ISO‑compliant turning holders and boring bars. Is the insert reversible or single‑use? This indexable insert is double‑sided, allowing rotation to a second cutting edge when the active edge reaches the end of its service life. What are the key dimensions to check before ordering? Check the ISO designation (DNMG150412), corner radius (1.2 mm), thickness (4.76 mm) and the 55° included angle to ensure correct seating and performance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
Benefit from a combination of high wear resistance, fracture toughness and ISO compatibility that keeps turning cycles productive and predictable; the T9215 CVD-coated carbide grade allows extended tool life and consistent part quality. Order the insert directly via Metav Werkzeuge or consult the company’s specialists for selection and supply. DNMG 150412 T9215 turning insert for steel machining — Tungaloy A DNMG150412 T9215 indexable insert engineered for medium steel turning, featuring a CVD-coated carbide substrate and a 55° rhombic geometry for stable cutting performance. DNMG150412 geometry, 55° cutting angle CVD-coated carbide grade T9215, wear-resistant Double-sided chipbreaker for continuous cuts Rhombic insert with 1.2 mm corner radius Maximise productivity in medium-steel turning The CVD-coated carbide grade T9215 is formulated to combine wear resistance with sufficient fracture toughness, which supports sustained cutting in continuous to slightly interrupted operations. This balance reduces the frequency of index changes and tool breakage, translating into fewer stoppages and improved cycle times on lathes and turning centres. For machining shops aiming for repeatable part quality, the CVD-coated surface lowers flank wear and maintains dimensional accuracy across longer tool life. Reliable ISO fit reduces setup variability Compatibility with ISO holders is governed by form, relief angle, tolerance class, fastening method, size and thickness; matching the insert geometry to the clamping system ensures repeatable seating and consistent cutting conditions. The rhombic 55° insert geometry and standard ISO designation make the part straightforward to integrate into established toolholders, shortening setup times and simplifying inventory management. Correct pairing of holder and insert also mitigates vibration and improves surface finish during both external and internal turning. Practical selection of chipbreaker and edge preparation The double-sided chipbreaker combined with a 1.2 mm corner radius offers a versatile edge preparation for medium steels, enabling efficient chip control and stable forces during turning. The cylindrical hole with central fixing supports secure clamping and repeatable indexing. Choosing an insert from this specification is particularly effective when a balance between productivity and surface quality is needed; the thickness and geometry support both roughing passes and finishing operations when coupled with an appropriate feed and holder rigidity. For reliable, high-productivity steel turning, contact Metav Werkzeuge to order this Tungaloy DNMG 150412 T9215 insert or to receive tailored advice; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6773898 Manufacturer SKU: TUN6773898 Manufacturer: Tungaloy Model series: ISO turning inserts Facts Corner radius: 1.2 mm Cutting angle: 55° Plate thickness: 4.76 mm Plate size: 15 mm Special features Material: carbide Coating: CVD-coated (grade T9215) Chipbreaker: double-sided Hole: with cylindrical hole Geometry: rhombic, ISO DNMG150412 Free/relief angle: 0° Application: turning (external and internal) FAQ What materials is this insert suitable for? The DNMG150412 T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade T9215 balances wear resistance and toughness for productive steel turning. How does the chipbreaker affect performance? The double-sided chipbreaker on this Tungaloy insert improves chip control for continuous to slightly interrupted cuts and helps maintain stable cutting forces and surface quality. Is this insert compatible with standard ISO holders? Yes, the insert follows the ISO DNMG150412 form; compatibility depends on matching form, relief angle, tolerance class, fastening and thickness to the chosen holder. What does the 1.2 mm corner radius mean in practice? A 1.2 mm corner radius offers a compromise between strength and finish: it increases edge robustness for higher feeds while still enabling acceptable surface quality on turned parts. Can the insert be used for both roughing and finishing? With the right choice of holder rigidity and cutting data, the CVD-coated T9215 insert delivers a combination of productivity for roughing and adequate finish for semi-finish operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9215 Wendeplatten - Tungaloy
Take advantage of the proven combination of CVD-coated carbide T9215 for high wear resistance and a 55° rhombic geometry with 1.2 mm corner radius for robust edge strength; this yields reliable productivity in medium steel turning and long tool life. Order the DNMG150412 T9215 indexable insert via Metav Werkzeuge or consult the specialists for application advice. DNMG150412 T9215 indexable insert — 55° rhombic, CVD-coated carbide for turning — Tungaloy DNMG150412 T9215 is a 55° rhombic, ISO-standard indexable insert designed for external and internal turning in medium-steel applications CVD-coated carbide T9215 for medium steel 55° rhombic geometry for versatile turning 1.2 mm corner radius for robust edge Double-sided chipbreaker with cylindrical hole High-productivity turning for medium steels The CVD-coated grade T9215 combines high wear resistance with fracture resistance, making it a first choice for productive machining of medium steels. Its cutting behaviour is optimised for continuous to slightly interrupted cuts, so sustained production runs benefit from stable tool life and predictable replacement intervals. The coating reduces flank wear under elevated cutting speeds, which contributes directly to consistent component tolerances and a lower rate of tooling changeovers. Robust edge geometry that supports stability A 55° rhombic geometry paired with a 1.2 mm corner radius provides a favourable balance between cutting strength and access to part features. The geometry is engineered to withstand radial loads and occasional interruptions, while the rounded corner reduces notch formation and chipping. The insert is double-sided, offering two indexable edges per side, and is drilled with a cylindrical central hole to secure it reliably in standard ISO-compatible holders and clamping systems. Clear guidance on compatibility and mounting This insert belongs to the ISO-standard indexable turning family and is compatible with matching external holders or boring bars when form, clearance angle, tolerance class, fastening, size and thickness correspond. The clearance angle is 0°, and the plate thickness is 4.76 mm, so the insert is to be mounted with the appropriate shim/clamp set and replacement screws for safe, repeatable seating. Correct matching of holder and insert minimises vibration and supports repeatable surface finish and dimensional results. Optimised chip control and targeted application range The integrated double-sided chipbreaker is designed to manage chip formation when machining medium steel, improving evacuation and reducing the risk of built-up edge. Selection of the chipbreaker style and the T9215 grade should be aligned with workpiece stability and feed rate; the system performs best under steady feeds where the chip form remains consistent. Typical applications include both external and internal turning, where productivity and tool life are prioritised. Contact Metav Werkzeuge to discuss Tungaloy turning solutions, request precise holder compatibility information, or obtain technical recommendations by email or phone Technical data Article number: 6772216 Manufacturer SKU: TUN6772216 SKU: 6772216-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Geometry: 55° Corner radius: 1.2 mm Plate size: 15 Plate thickness: 4.76 mm Clearance angle: 0° Hole style: cylindrical Special features Grade: T9215 (CVD-coated carbide) Material: carbide Application: turning (external and internal) Chipbreaker: double-sided Plate form: rhombic With central hole Suited to continuous to slightly interrupted cuts ISO-standard indexable insert FAQ What materials is this insert best suited for? The DNMG150412 T9215 insert (Tungaloy, SKU TUN6772216) is optimised for medium steel machining; the T9215 grade ensures wear resistance and fracture safety in continuous to lightly interrupted operations. How is compatibility with holders determined? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; the DNMG150412 fits ISO-compatible holders designed for 55° rhombic inserts. Can this insert be used for internal turning as well as external turning? Yes, the DNMG150412 T9215 is suitable for both external and internal turning when paired with the appropriate external holder or boring bar and correct clamping components. What benefits does the T9215 grade provide compared with uncoated grades? The T9215 CVD-coated carbide offers enhanced wear resistance and improved edge robustness, translating into longer tool life and steadier productivity in medium steel applications. Is the insert reversible and does it have a mounting hole? The insert is double-sided with a central cylindrical hole, allowing multiple indexings and secure mounting; plate thickness is 4.76 mm with a 1.2 mm corner radius for robust performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9225 Wendeplatten - Tungaloy
The combination of a CVD-coated cemented carbide grade and a robust DNMG geometry delivers consistent performance in medium to heavy turning operations; the T9225 grade is designed for interrupted cuts and varying engagement. Order or request tailored cutting data via Metav Werkzeuge if application guidance is required. DNMG150412 T9225 turning insert — Tungaloy DNMG150412 T9225 is an ISO rhombic turning insert engineered for reliable medium-to-heavy steel turning with systematic chip control CVD-coated cemented carbide T9225 Universal grade for medium to heavy steel turning Rhombic DNMG geometry with 55° approach angle Double-sided insert with cylindrical hole Greater productivity through a robust carbide grade The T9225 grade is a CVD-coated cemented carbide developed as a universal solution for demanding turning. Its composition balances hardness and toughness, which helps resist chipping under slightly interrupted cuts and variable engagement. For workshop planners this means fewer unexpected insert changes and more predictable tool life, supporting continuous production and lower process downtime. The coating improves wear resistance and maintains a stable cutting edge during prolonged machining cycles. Secure seating, consistent form and versatile geometry The rhombic DNMG shape with a 55° principal angle gives a versatile approach for both external and internal turning on conventional and CNC lathes. The indexable design with a cylindrical hole and standard mounting fits ISO-compatible holders when matched for form, relief angle and tolerance class; correct pairing ensures accurate seat contact and repeatable positioning. The 1.2 mm corner radius offers a compromise between edge strength and surface finish, making the insert suitable for a range of turning passes from finishing to light roughing. Practical advantages on the shop floor This indexable plate is double-sided, effectively doubling available cutting edges per insert and improving cost efficiency. With a nominal thickness of 4.76 mm, the insert provides mechanical stability in the pocket and resistance to bending under radial loads. The integrated double-sided chipbreaker aids in controlled chip formation and evacuation on steels, reducing the risk of built-up edge and improving component surface quality. For best results, pair the insert with a holder and feed that match the intended material and depth of cut; the ISO designation simplifies selection of compatible tooling components. For application advice, cutting-data sheets or stock queries about the Tungaloy T9225 DNMG insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, technical support Technical Data Article number: 6796035 Manufacturer SKU: TUN6796035 Product SKU: 6796035-Tungaloy Model series: ISO turning inserts Designation: DNMG150412 T9225 Core dimensions and numbers Geometry: rhombic, 55° Size: 15 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Hole: with cylindrical hole Special features Coating: CVD-coated Material: cemented carbide Grade: T9225, universal for medium–heavy steel turning Double-sided insert Double-sided chipbreaker ISO-compatible turning plate FAQ How many cutting edges does the insert provide? The double-sided design of the DNMG150412 T9225 insert provides multiple usable cutting edges; each side contributes available edges as per the DNMG geometry, extending tool life. Which materials is this grade recommended for? The T9225 grade is formulated as a robust universal solution for medium to heavy steel turning, especially where chip control and toughness are required. What is the corner radius and how does it affect finish? The insert has a 1.2 mm corner radius; this radius improves edge strength for heavier cuts while still allowing acceptable surface finish in typical turning operations. Is the insert compatible with standard ISO holders? Yes, the DNMG150412 follows ISO specifications; compatibility depends on matching holder form, relief angle, tolerance class, fastening and thickness, which ensures correct seating. What advantages does the CVD coating provide? The CVD-coated surface enhances wear resistance and maintains a stable cutting edge under continuous and intermittent cutting, improving overall insert life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9225 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide toughness, a 1.2 mm corner radius and ISO compatibility for dependable medium-to-heavy steel turning; order direct via Metav Werkzeuge or consult our advisors for application matching. DNMG150412 T9225 turning insert by Tungaloy — CVD-coated carbide, 55° rhombic geometry The DNMG150412 T9225 is an ISO-standard rhombic indexable insert for external and internal turning, designed as a robust universal grade for medium-to-heavy steel machining. ISO rhombic form, 55° cutting geometry CVD-coated carbide for high wear resistance Double-sided chipbreaker for consistent chips 1.2 mm corner radius for stronger cutting edge Proven productivity for medium-to-heavy steel turning The CVD-coated carbide T9225 grade provides a balance of wear resistance and toughness suitable for demanding steel applications. Its robust universal grade is engineered to tolerate variable engagement and lightly interrupted cuts, which reduces insert change frequency and supports longer production runs. By selecting this grade, process planners can expect improved tool life and more consistent component quality, enabling higher material removal rates without sacrificing surface finish. The combination of coating technology and substrate hardness makes it possible to maintain cutting performance across varying feeds and depths, translating directly into operational efficiency and predictable machining cycles. Secure fit and straightforward integration into tool systems Designed to the ISO DNMG150412 specification, the insert offers an established 55° rhombic geometry that mates with many external holders and boring bars. Compatibility is governed by form, relief angle, tolerance class, mounting method, size and thickness, so the insert fits reliably when the correct holder is chosen. Key dimensions such as 4.76 mm thickness and a nominal 15 mm size simplify selection and stocking for production environments. The presence of a cylindrical hole supports secure clamping and repeatable seat location, reducing setup variation and helping maintain concentricity and process stability during batch production. Consistent chip control and superior edge strength for repeatable finishes Chip control is achieved through the double-sided chipbreaker, which offers two usable cutting edges per side and consistent swarf formation across common steel grades. The 1.2 mm corner radius contributes to a durable cutting edge that resists chipping under intermittent cutting conditions and enhances surface integrity on finished parts. The rhombic shape and relief geometry permit both external and some internal turning strategies, giving shops flexibility to standardise on one insert shape for multiple operations. Together, the chipbreaker, corner radius and coating deliver a stable cutting process that supports predictable cycle times and reduces the need for rework. Practical system considerations for reliable machining A full machining setup comprises the ISO indexable insert, a compatible external holder or boring bar, an appropriate shim or clamp set and the correct replacement screws. Ensuring that the holder matches the insert’s relief angle (0°) and tolerances minimises runout and maximises edge life. Where interrupted cuts or mixed engagement are encountered, the Tungaloy grade’s toughness and optimised chipformer geometry help maintain production uptime. For operations aiming to balance performance with process security, choosing inserts of this specification simplifies inventory and supports repeatable setups across batch sizes. Contact Metav Werkzeuge for application-specific recommendations and to arrange supply of original Tungaloy inserts: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6780767 SKU: 6780767-Tungaloy Manufacturer SKU: TUN6780767 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Application: Turning Material: Carbide Specifications Corner radius: 1.2 mm Insert size: 15 mm Plate thickness: 4.76 mm Relief angle: 0° Cutting geometry angle: 55° Special features ISO designation: DNMG150412 Grade/coating: T9225 Coating type: CVD-coated carbide Shape: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Suitable for: medium to heavy steel machining System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert designed for? The DNMG150412 T9225 insert is intended primarily for medium-to-heavy steel machining; the T9225 CVD-coated carbide grade offers toughness and wear resistance suited to those conditions. Can this insert be used for interrupted cuts? Yes. The T9225 grade and the 1.2 mm corner radius provide enhanced edge strength and toughness for operations with occasional interruptions. How is chip control achieved with this insert? Chip control comes from the double-sided chipbreaker and the insert’s geometry, which together promote consistent swarf formation and reliable evacuation during turning. Which holders are compatible with the DNMG150412 insert? Compatibility depends on matching the insert’s ISO rhombic form, relief angle, tolerance class, mounting method, size and thickness; select holders specified for DNMG 55° rhombic inserts and the same thickness and hole style. How many usable edges per insert are available? The double-sided configuration provides multiple usable cutting edges; correct indexing doubles effective edges and supports economical tool usage. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade for extended tool life, a robust DNMG geometry for versatile turning and reliable clamping via the cylindrical hole; order directly through Metav Werkzeuge or consult the technical team for application-specific guidance. DNMG 150412 T9225 — Turning insert DNMG for medium to heavy steel, Tungaloy The DNMG150412 T9225 is a rhombic ISO turning insert designed for external and internal turning in medium to heavy steel applications, offering a CVD-coated carbide grade and a 55° geometry for stable, repeatable machining. CVD-coated carbide grade T9225 Robust universal grade for medium to heavy steel Rhombic DNMG insert, 55° geometry Double-sided chipbreaker for stable cutting Cylindrical hole for secure clamping Enhance machining reliability with a tough CVD-coated grade The combination of the T9225 grade and CVD-coated carbide construction delivers high toughness and improved wear resistance, which is particularly beneficial in interrupted cuts and variable engagement conditions. As a universal sort for medium to heavy steel machining, this grade balances hardness and fracture resistance to extend tool life while maintaining predictable flank wear. The coating reduces adhesion and thermal wear, enabling higher cutting parameters in many production settings without compromising component quality. Predictable geometry and secure clamping for consistent results The rhombic DNMG form with a 55° lead angle and a cylindrical hole ensures stable clamping and straightforward indexability in standard ISO holders. A corner radius of 1.2 mm and a plate thickness of 4.76 mm contribute to mechanical rigidity, while the double-sided chipbreaker permits cost-effective indexing and repeated use of the cutting edges. Compatibility with a holder depends on form, relief angle, tolerance class, fixing method, size and thickness; selecting a matching outside holder or boring bar completes the system for reliable performance. Practical process benefits for production environments Designed for both external and internal turning, the insert supports cleaner chip control and consistent surface finish when combined with an appropriately matched chipbreaker and stable machine setup. The insert’s specification supports efficient material removal in challenging conditions, reducing the frequency of tool changes and unplanned downtime. For production planners, the result is improved throughput and repeatability; for operators, easier component inspection and enhanced dimensional stability during medium to heavy cutting operations. For machining tasks that demand robustness and repeatable results, contact Metav Werkzeuge to discuss the DNMG150412 T9225 from Tungaloy, request availability or obtain application-specific recommendations by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6780828 Manufacturer SKU: TUN6780828 SKU: 6780828-Tungaloy Manufacturer: Tungaloy Characteristics Size: 15 mm Thickness: 4.76 mm Corner radius: 1.2 mm Lead angle: 55° Relief angle: 0° Insert form: rhombic Hole style: cylindrical hole Special features Grade: T9225 Coating: CVD-coated carbide Material: Carbide Chipbreaker: Double-sided Series: ISO turning indexable inserts Typical application: External and internal turning FAQ Is this insert suitable for interrupted cuts and varying engagement? The DNMG150412 T9225 is specified as a robust universal grade with enhanced toughness, making it suitable for interrupted cuts and changing engagement conditions in medium to heavy steel turning. Which materials can be machined with this insert? This insert and the T9225 grade are intended primarily for steel machining in medium to heavy applications; selection of the chipbreaker and cutting parameters should reflect the specific steel alloy and machining conditions. How does the double-sided chipbreaker affect productivity? A double-sided chipbreaker permits indexing of two cutting edges per side, effectively increasing usable edges and reducing tool change frequency, which supports higher productivity and lower per-cut tooling cost. What determines compatibility with a toolholder? Compatibility is determined by insert form, relief angle, tolerance class, fixing method, size and thickness; matching these parameters ensures secure clamping of the DNMG150412 insert in standard ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD‑coated carbide grade engineered for medium-to-heavy steel turning and a 55° rhombic geometry that ensures predictable engagement and stable cutting performance; order via Metav Werkzeuge or consult the specialists for application-specific advice. DNMG150412 T9225 ISO turning insert — robust CVD-coated carbide for steel turning, Tungaloy DNMG150412 T9225 is an ISO‑conforming rhombic indexable insert designed for external and internal turning in steel, offering a balance of toughness and wear resistance for varying engagement conditions CVD-coated carbide grade T9225 Robust universal grade for steel turning Double-sided chipbreaker for versatility 55° rhombic geometry for stable engagement Consistent cutting performance under variable conditions The combination of a CVD‑coated surface and a carbide substrate in grade T9225 yields increased toughness where intermittent cuts or variable engagement occur. This indexable insert is developed as a robust universal grade for medium-to-heavy steel turning, delivering a predictable compromise between edge strength and wear resistance. The coating reduces adhesive wear and improves resistance to heat, which in turn extends effective cutting life and reduces tool change frequency, supporting higher uptime in production. Easier holder matching and streamlined inventory Compliance with ISO form and size standards simplifies selection for ISO‑compatible toolholders: the rhombic DNMG form and the ISO code 150412 ensure clear matching by form, clearance angle, tolerance class, fastening and thickness. Using standardised inserts reduces the number of unique items required in stock and makes replacement straightforward. For production planning, this standardisation leads to fewer assembly interruptions and less downtime for retooling, improving overall process efficiency. Improved surface finish and reliable chip control The double-sided chipbreaker design helps to control chip form across a range of depths of cut and feed rates, which supports a consistent surface finish on turned components. A well‑matched chipbreaker reduces the risk of long, tangled chips and lowers the likelihood of workpiece damage under continuous operation. When combined with the coated carbide substrate, the arrangement maintains edge stability and contributes to reproducible results, particularly where repeatability is critical for downstream assembly or inspection. Practical mounting and dimensional clarity for secure clamping The insert features a 55° rhombic geometry, a cylindrical centre hole, a corner radius of 1.2 mm and a plate thickness of 4.76 mm, giving a clear basis for selecting the appropriate clamping set, shim and screw assembly. These measurable characteristics permit precise seating in compatible ISO external holders or boring bars, ensuring stable cutting conditions and minimising vibration. The indexable design permits economical rotation to a fresh cutting edge, maintaining productivity while controlling tooling costs. For application advice or availability of the Tungaloy DNMG150412 T9225 insert contact Metav Werkzeuge for tailored recommendations and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6796075-Tungaloy Manufacturer article number: 6796075 Manufacturer SKU: TUN6796075 Model series: ISO turning indexable inserts Material: carbide Grade/coating: T9225, CVD‑coated Application: turning Core dimensions & measurable data ISO designation: DNMG150412 Size: 15 mm Thickness: 4.76 mm Cutting angle: 55° Corner radius: 1.2 mm Free clearance angle: 0° Hole: with cylindrical hole Design & special features Rhombic plate shape (DNMG) Double-sided chipbreaker CVD-coated carbide substrate Robust universal grade for medium-to-heavy steel turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The DNMG150412 T9225 insert is specified for steel turning, offering a universal solution for medium‑to‑heavy steel applications due to its tough CVD‑coated carbide composition. Is the cutting geometry suitable for interrupted cuts? Yes; the Tungaloy grade T9225 and the insert’s robust construction provide added toughness and edge stability, making the insert appropriate for slightly interrupted or variable engagement conditions. How does the chipbreaker affect productivity? The double‑sided chipbreaker on the DNMG150412 promotes controlled chip formation and evacuation, contributing to improved surface quality and fewer process interruptions. Which holders are compatible with this indexable insert? Compatibility is determined by the DNMG form and the ISO code 150412; holders matching the rhombic DNMG form, 15 mm size and corresponding clamping geometry are suitable for secure mounting. Can the insert be rotated to a fresh edge? The double‑sided design permits indexing to an unused cutting edge, allowing economical extension of tool life and maintaining consistent cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9225 for enhanced toughness, the DNMG150412 ISO geometry for fast, standardised tool changes, and a 1.2 mm corner radius for robust edge life to maintain productive turning operations; order the insert directly via Metav Werkzeuge or consult our advisers for application support. DNMG150412 T9225 DNMG turning insert by Tungaloy — CVD-coated carbide, ISO 55° A DNMG150412 T9225 rhombic, ISO-standard turning insert designed for medium to heavy steel turning, offering a balance of toughness and wear resistance for variable cutting conditions ISO DNMG 150412 rhombic 55° geometry CVD-coated carbide grade T9225 for steel 1.2 mm corner radius for robust edge life Double-sided chipbreaker, reversible insert Reliable cutting performance under changing conditions The combination of CVD-coated carbide and the T9225 grade delivers reliable toughness for medium to heavy steel turning where intermittent cuts or variable engagement demand extra resilience. The coating improves wear resistance and reduces built-up edge, while the substrate composition gives the cutting edge sufficient toughness to withstand moderate interruptions. This results in more consistent cycle times and fewer unexpected tool changes, supporting higher throughput on batch and single-part production alike. Fast integration into ISO tool systems to reduce downtime Built to the ISO DNMG150412 standard, the insert integrates easily with compatible holders thanks to defined form, relief angle and dimensional tolerances. The rhombic 55° geometry and the cylindrical hole ensure secure clamping and repeatable positioning, simplifying tool changeover and minimising set-up time. Compatibility is determined by form, free angle, tolerance class, fastening method, size and thickness, allowing a predictable replacement process within existing turning tool systems. Greater edge security and consistent surface quality A 1.2 mm corner radius provides an enlarged cutting edge for improved resistance to chipping and extended edge life, which in turn contributes to steadier surface finish and reduced rework. The double-sided chipbreaker design offers reversible use of the insert for cost-effective edge rotation and economical tooling. This combination supports productive machining of external and internal turning operations while maintaining controlled chip formation and workpiece integrity. For machining tasks that demand a robust, versatile insert, contact Metav Werkzeuge for tailored advice on the DNMG150412 T9225 insert and to place orders through our technical sales team. Technical Data Article number: 6780862 SKU: 6780862-Tungaloy Manufacturer SKU: TUN6780862 Model series: ISO turning indexable inserts Material: Carbide Grade: T9225 Coating: CVD-coated Application: Turning Facts Corner radius: 1.2 mm Plate thickness: 4.76 mm Inscribed circle / size: 15 mm Insert angle: 55° Relief angle: 0° Hole: cylindrical Special features Rhombic plate form DNMG150412 Double-sided chipbreaker Reversible insert with cylindrical hole Robust universal grade for medium to heavy steel ISO compatibility determined by form, tolerance, size and thickness FAQ Is the insert suitable for interrupted cuts and mixed engagement conditions? The DNMG150412 T9225 insert, with its CVD-coated carbide combination and tougher T9225 grade, is intended for medium to heavy turning where occasional interruptions occur, offering improved edge security under changing engagement. Which workpiece materials are recommended for this grade? The T9225 grade is developed for steel machining, particularly where a balance of wear resistance and toughness is required for medium to heavy steel turning operations. How does the double-sided chipbreaker affect tool economics? The reversible, double-sided chipbreaker on this indexable insert allows edge rotation and reuse, effectively increasing available cutting edges and lowering tooling cost per edge while maintaining consistent chip control. Is the DNMG150412 compatible with existing ISO DNMG holders? The insert follows the ISO DNMG150412 designation; compatibility depends on matching form, free angle, tolerance class, fastening method, size and thickness to the holder—this standardisation generally enables straightforward interchange within ISO systems. What are the main dimensional values to check before ordering replacements? Key dimensions for the insert are the inscribed circle (15 mm), plate thickness (4.76 mm), corner radius (1.2 mm), and insert angle (55°); confirm relief angle and hole style for correct clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9225 and the robust DNMG150412 geometry for reliable mid-to-heavy steel turning; improved edge life and stable chip control help maintain productive machining cycles. Order the insert directly via Metav Werkzeuge or consult the specialists for holder compatibility and process optimisation. DNMG150412 T9225 — DNMG 150412 ISO turning insert, CVD-coated carbide, Tungaloy The DNMG150412 T9225 is an ISO-standard rhombic turning insert designed for medium to heavy steel turning, delivering stable chip formation and reliable performance under variable engagement conditions. CVD-coated carbide grade T9225 55° rhombic geometry for versatile turning 1.2 mm corner radius for durable edges Double-sided chipbreaker for interrupted cuts High-performance grade for demanding steel turning The CVD-coated T9225 grade is formulated as a robust universal choice for medium to heavy steel machining, where variable engagement or light interruptions require additional toughness. The CVD-coated carbide substrate provides enhanced wear resistance while maintaining sufficient fracture strength; this balance reduces frequency of indexation and tool change, contributing to lower machining downtime. As a result, cycle times and overall process stability improve when machining a broad range of steels with fluctuating cutting conditions. Geometry and design that simplify tool selection The rhombic 55° geometry combined with a 1.2 mm corner radius and a plate thickness of 4.76 mm makes the insert suitable for both external and internal turning operations. The insert is supplied with a cylindrical centred bore, enabling secure clamping in ISO holders; compatibility depends on holder form, clearance angle, tolerance class, fixation method, size and thickness. The standardised ISO designation eases procurement and replacement planning, while the rhombic profile offers a compromise between strength and accessibility for varied turning tasks. Consistent chip control and flexible indexing A double-sided chipbreaker provides dependable chip formation and evacuation, particularly useful in interrupted cuts and mixed-operation batches. The indexable nature of the plate allows presentation of fresh edges without regrinding, supporting consistent surface finish and predictable wear progression. Together with the DNMG geometry and the T9225 grade, the insert supports repeatable results and long-term tool life in demanding workshop environments, enabling productive tool strategies across conventional and CNC lathes. Contact Metav Werkzeuge for application advice or to request the Tungaloy DNMG150412 T9225 ISO turning insert for improved process reliability in steel turning Technical data Article number: 6780817 SKU: 6780817-Tungaloy Manufacturer SKU: TUN6780817 Model series: ISO turning inserts Facts Size: 15 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Insert angle: 55° Special features Material: carbide (Hartmetall) Grade / coating: T9225 (CVD-coated carbide) Geometry: rhombic (DNMG) Hole: with hole (cylindrical bore) Chipbreaker: double-sided Application: turning (external and internal) Typical system: ISO insert + compatible holder, clamping set, replacement screws FAQ What materials is this insert suited for? The DNMG150412 T9225 Tungaloy turning insert (SKU 6780817-Tungaloy) is intended primarily for steel machining and performs well in medium to heavy turning operations where toughness is required. How does the T9225 grade affect tool life? The CVD-coated T9225 grade combines wear resistance with increased toughness; the result is improved resistance to edge chipping and more consistent life across variable cutting conditions for the DNMG150412 insert. Is the DNMG150412 compatible with standard ISO holders? Compatibility follows ISO conventions; the DNMG150412 designation indicates standard form and basic dimensions, but holder fit depends on form, clearance angle, tolerance class, fixation and thickness. What advantage does the double-sided chipbreaker provide? The double-sided chipbreaker on this Tungaloy insert promotes stable chip control and allows indexation to present fresh cutting edges, aiding performance in interrupted cuts and variable feed conditions. Can the insert be used for internal turning? Yes, the insert’s rhombic geometry and 55° approach angle make the DNMG150412 suitable for both external and internal turning applications when used with the appropriate holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9225 Wendeplatten - Tungaloy
Take advantage of the robust T9225 grade and CVD-coated carbide construction combined with the 55° rhombic geometry and a 1.2 mm corner radius for reliable medium-to-heavy turning performance; order the insert directly via Metav Werkzeuge or consult the Metav team for application guidance. DNMG150412 T9225 Tungaloy indexable turning insert — ISO turning, 55° rhombic, CVD-coated The DNMG150412 T9225 is an ISO-standard indexable turning insert for external and internal turning, designed as a robust universal grade for medium-to-heavy steel machining. ISO-standard rhombic insert, 55° cutting angle CVD-coated carbide grade T9225 for steel machining 1.2 mm corner radius for versatile contouring Double-sided design with cylindrical locating hole Reliable productivity through a robust CVD-coated grade The CVD-coated T9225 carbide grade is formulated for stable chip formation and reliable performance under varying engagement conditions. As a universal solution for medium-to-heavy steel machining, the coated substrate increases resistance to edge breakdown and extends tool life, especially where interrupted cuts or changing cutting forces occur. The result is sustained machining output and fewer insert changes, supporting predictable batch production and reduced downtime. Seamless integration into ISO tool systems for flexible use Designed to the ISO DNMG designation, the insert mates with compatible external holders when form, relief angle, tolerance class, fixation, size and thickness match the system requirements. The 55° rhombic geometry and the cylindrical locating hole ensure secure seating and repeatable clamping, while the double-sided configuration provides two productive cutting edges per index. This modular setup — insert, appropriate holder, shim/clamp set and replacement screw — enables quick index changes and consistent setup repeatability across the toolroom. Practical benefits: versatile contouring and consistent surface finish A 1.2 mm corner radius delivers a balance between contour capability and edge strength, permitting both finishing passes and moderate stock removal without sacrificing edge stability. In external and internal turning operations the geometry supports improved surface finish and stable cutting forces, contributing to higher overall productivity. The combination of grade, geometry and chipbreaker design reduces rework, helps to maintain cycle times and simplifies grade selection for mixed-series production runs. For demanding steel turning applications trust Tungaloy's T9225 inserts for reproducible results — contact Metav Werkzeuge for application recommendations and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6781277 Manufacturer SKU: TUN6781277 Model series: ISO turning indexable inserts Material: carbide Grade/coating: T9225 (CVD-coated) ISO designation: DNMG150412 Numbers / Core technical data Size: 15 mm Thickness: 4.76 mm Corner radius: 1.2 mm Cutting angle: 55° Relief angle: 0° Hole style: cylindrical hole Designs / Special features Rhombic plate shape Double-sided chipbreaker With locating hole for secure clamping Compatible with ISO holders depending on form, relief angle, tolerance class, fixation, size and thickness Intended for external and internal turning; universal for medium-to-heavy steel machining FAQ What materials is this insert best suited for? The DNMG150412 T9225 insert is specified as a robust universal grade for steel machining; the CVD-coated substrate is optimised for medium-to-heavy turning conditions. How does the T9225 grade affect tool life? Tungaloy’s T9225 grade, with its CVD coating, improves resistance to edge wear and supports stable chip control, which together help to extend tool life in interrupted or demanding cuts. Can this insert be used on internal as well as external turning operations? Yes, the rhombic 55° geometry and the 1.2 mm corner radius make the insert suitable for both external and internal turning where the holder geometry permits. What determines compatibility with a turning holder? Compatibility depends on matching the insert form, relief (facing) angle, tolerance class, fixation method, size and thickness; the DNMG150412 designation ensures ISO conformity for straightforward matching. How many cutting edges are available per insert? The plate is double-sided with a cylindrical locating hole, providing two usable cutting edges before indexing or replacement is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150412 T9225 Wendeplatten - Tungaloy
Take advantage of the robust T9225 CVD-coated carbide grade and the ISO-standard rhombic geometry to ensure stable medium-to-heavy steel turning with reliable chip control. Order directly via Metav Werkzeuge or consult their specialists for holder compatibility and application-specific recommendations. DNMG150412 T9225 Turning insert — Tungaloy, CVD-coated carbide, 55° The DNMG150412 T9225 is an ISO-standard rhombic turning insert engineered for medium-to-heavy turning tasks, offering a 55° cutting edge and a 1.2 mm corner radius for improved edge strength and process stability. ISO-standard rhombic insert, 55° angle CVD-coated carbide grade T9225 1.2 mm corner radius for robustness Double-sided chipbreaker with cylindrical hole Reliable cutting performance for variable engagement conditions The combination of CVD-coated cemented carbide grade T9225 and the rhombic insert geometry delivers consistent performance where cuts vary or interruptions occur. The coating increases wear resistance while the substrate maintains enough toughness to resist chipping during intermittent cuts. This balance results in a stable machining process and reduced insert changes, supporting higher uptime and predictable production flow. Seamless integration with ISO holders and straightforward mounting Designed as part of an ISO turning insert series, the item fits holders that match its form, relief angle and tolerance class. The insert’s cylindrical hole and standard dimensions simplify clamping and replacement: the mounting interface determines compatibility rather than proprietary features. This facilitates rapid tool changeover and straightforward inventory management across conventional turning tool systems. Enhanced tool life and chip control for steel machining With a double-sided chipbreaker, the insert offers controlled chip formation across a range of cutting parameters, which is particularly advantageous when machining steel in medium-to-heavy cuts. The 1.2 mm corner radius increases edge strength to withstand radial load peaks, while the 55° cutting angle optimises the balance between cutting force and surface finish. For applications demanding repeatable results, this grade and geometry provide reliable tool life and consistent part quality. If further technical details are required for specific applications—such as recommended feeds, speeds or holder matching—Metav Werkzeuge provides additional data and advice; contact information is available for quick specialist support. Contact Metav Werkzeuge for tailored advice on Tungaloy carbide turning solutions and to arrange supply of the DNMG150412 T9225 insert: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 6781303 Manufacturer SKU: TUN6781303 SKU: 6781303-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.2 mm Relief angle: 0° Insert angle: 55° Thickness: 4.76 mm Insert size: 15 mm Special features Grade: T9225 (CVD-coated carbide) Double-sided chipbreaker ISO-standard turning insert Application: Turning (external and internal) Material: cemented carbide Shape: rhombic Hole style: cylindrical hole FAQ What materials is this insert suitable for? The DNMG150412 T9225 insert is specified for medium-to-heavy steel machining; the CVD-coated carbide grade T9225 provides toughness for interrupted cuts. Is the insert reversible or single-use? This is a double-sided turning insert, so both edges can be used before indexing, extending tool life relative to single-edged alternatives. How is holder compatibility determined? Compatibility depends on the holder’s form, relief angle, tolerance class, fastening method, size and thickness; confirm these parameters against the DNMG150412 dimensions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com