DPMT 070208 AH8015 Wendeplatten - Tungaloy
Combining the PVD‑coated AH8015 grade with a 0.8 mm corner radius and ISO rhombic geometry delivers stable cutting edges and consistent surface quality; order directly via Metav Werkzeuge or consult our technical advisers for optimal grade and chipbreaker selection. DPMT 070208 AH8015 — Turning insert for external and internal turning by Tungaloy DPMT070208 AH8015 is an ISO‑standard rhombic turning insert designed for reliable general turning of heat‑resistant alloys and mixed materials. ISO‑standard rhombic insert PVD‑coated AH8015 carbide grade 0.8 mm corner radius for consistent finish Cylindrical hole with 40°–60° countersink Maximised process reliability for turning operations The PVD‑coated AH8015 grade offers a balanced combination of wear resistance and edge stability, making it particularly suitable for machining heat‑resistant alloys. With ISO conformity, the insert supports standard holder systems where fit depends on form, clearance, tolerance class and thickness. The controlled coating increases oxidation resistance at elevated temperatures, leading to longer tool life under continuous and interrupted cuts; this contributes to predictable cycle times and reduced tool changes, improving overall shopfloor efficiency. Precision geometry that reduces setup time The rhombic DPMT form with a 55° approach angle and 11° clearance provides a compromise between accessibility and rigidity, helping to maintain dimensional accuracy in both external and internal turning. The 0.8 mm corner radius produces a consistent surface finish while tolerating moderate feed rates, and the 2.38 mm plate thickness ensures sufficient support in the pocket. A cylindrical centre hole with a one‑sided countersink (40°–60°) simplifies secure clamping and repeatable positioning, reducing setup adjustments and minimising vibration. Versatile grade performance across materials This PVD‑coated cemented carbide insert is intended as a first choice for general machining of heat‑resistant and alloyed materials where a balance between life and edge robustness is required. The single‑sided chipbreaker is matched to the grade to assist in chip control for a variety of cutting conditions. For manufacturers aiming to standardise tooling across multiple alloy groups, the combination of geometry and AH8015 chemistry delivers dependable performance and predictable wear behaviour, supporting consistent part quality and process stability. Contact Metav Werkzeuge for application advice or to order the AH8015 grade insert; technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6951353 Manufacturer SKU: TUN6951353 Our SKU: 6951353-Tungaloy Facts Size: 07 (ISO) Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 11° Insert angle: 55° Hole: cylindrical hole with one‑sided countersink 40°–60° Material: cemented carbide Coating: PVD Special features ISO rhombic shape (DPMT) One‑sided chipbreaker Suitable for external and internal turning Grade AH8015 for heat‑resistant alloys Compatible with standard ISO holders FAQ What materials are best machined with this insert? The AH8015 grade is optimised for heat‑resistant and alloyed materials; the DPMT070208 insert provides a good balance between wear resistance and edge stability for these workpieces. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions for the DPMT form; compatibility depends on holder form, clearance, tolerance class, fastening and pocket size. How does the PVD coating affect performance? The PVD coating improves oxidation resistance and hardness at elevated temperatures, extending tool life in high‑temperature cutting typical for heat‑resistant alloys. Can the insert be used for finishing passes? With a 0.8 mm corner radius and stable geometry, the insert can achieve consistent surface finish under appropriate feeds and speeds; select machining parameters matched to the grade for optimal results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070208 AH8015 Wendeplatten - Tungaloy
Take advantage of a proven combination of PVD-coated carbide and ISO-standard geometry for stable chip control and consistent edge life; order the insert directly via Metav Werkzeuge or ask our consultants for compatibility and process recommendations. DPMT 070208 AH8015 Tungaloy indexable turning insert — ISO rhombic 55° geometry, PVD-coated carbide The DPMT070208 AH8015 insert is an ISO-standard indexable turning insert designed for external and internal turning, optimised for heat‑resistant alloys and general turning tasks ISO rhombic 55° geometry PVD-coated carbide AH8015 0.8 mm corner radius for robust edge Single-sided chipbreaker with countersink Reliable chip control with rhombic 55° geometry The rhombic 55° profile delivers a balanced cutting angle that reduces radial loads while maintaining accessibility for shoulder and profile turning. The combination of ISO-standard geometry and a single-sided chipbreaker yields consistent chip formation; the chipbreaker directs swarf away from the cutting zone, lowering the risk of re-cutting and contributing to longer toolfixture life. For users unfamiliar with chipbreaker design, this means fewer interruptions from clogged chips and more predictable machining cycles. Balanced grade for heat‑resistant alloys and general turning The AH8015 grade is a PVD-coated carbide optimised as a first choice for machining heat‑resistant alloys. It balances wear resistance and edge stability, which supports longer continuous cuts and reduces frequency of insert changes. In practice, this grade helps to maintain surface finish and dimensional control during medium-duty turning operations, allowing for consistent throughput without resorting to overly conservative cutting parameters. Secure clamping and simple mounting for production use The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°), enabling reliable centring and secure clamping in standard holders or boring bars. The plate thickness of 2.38 mm and the size designation 07 align with widely used ISO holders, making retrofitting straightforward where form, relief angle and tolerance class match. Clear compatibility reduces setup time and minimises the need for special fixtures, which supports efficient shopfloor workflows. Robust edge preparation for repeatable results With a 0.8 mm corner radius the cutting edge gives enhanced stability under variable feed, improving resistance to chipping during interrupted cuts or unstable clamping conditions. Edge preparation combined with the PVD coating mitigates adhesion and built‑up edge when machining sticky or work‑hardening alloys, thereby preserving geometry and helping to achieve repeatable part quality with fewer reworks. For availability, machining recommendations or to confirm holder compatibility, contact Metav Werkzeuge for personalised advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951286 Manufacturer SKU: TUN6951286 Manufacturer article number: 6951286 Model series: ISO turning indexable inserts Material: Carbide (cemented carbide) Dimensions & angles Size designation: 07 Thickness: 2.38 mm Corner radius: 0.8 mm Included angle: 55° Relief angle: 11° Features & mounting ISO designation: DPMT070208 Grade/coating: AH8015, PVD-coated Chipbreaker: single-sided Mounting hole: cylindrical hole + one-sided countersink (40°–60°) Application: Turning (external and internal) FAQ What materials is this insert suited for? The insert with grade AH8015 is intended primarily for heat‑resistant alloys and general turning operations; it provides a compromise between wear resistance and edge stability for such materials. How does the 55° rhombic geometry affect machining? A rhombic 55° geometry reduces radial cutting forces and improves access for shoulder and profile turning, which benefits process stability when using this insert. Is the insert compatible with standard ISO holders? The ISO designation DPMT070208 and the size 07 are designed to fit compatible ISO holders when form, relief angle and tolerance class match; the cylindrical hole with countersink supports secure clamping. What is the benefit of the AH8015 PVD coating? The PVD-coated AH8015 grade enhances wear resistance and reduces adhesion on the cutting edge, improving performance during continuous cuts in demanding alloys. Can the 0.8 mm corner radius be used for finishing passes? A 0.8 mm corner radius is primarily chosen for robust edge stability; for fine finishing, a smaller radius may provide better surface finish depending on the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070208 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated AH8015 carbide grade and a precise 55° rhombic geometry for reliable machining of heat‑resistant alloys; order or request application advice from Metav Werkzeuge for quick availability and process support. DPMT 070208 AH8015 ISO turning insert, PVD‑coated carbide, 55° rhombic – Tungaloy The DPMT 070208 AH8015 is an ISO‑norm rhombic indexable insert designed for external and internal turning, offering a balanced mix of wear resistance and cutting‑edge stability for heat‑resistant alloy machining. ISO‑normed DPMT 070208 form PVD‑coated AH8015 carbide grade 55° rhombic geometry, 11° relief angle One‑sided chipbreaker for stable chips High productivity on heat‑resistant alloys with balanced edge life The PVD‑coated AH8015 grade delivers a balanced combination of wear resistance and cutting‑edge stability, making the insert a solid choice for general machining of heat‑resistant alloys. The coating supports consistent edge behaviour under elevated temperatures, which translates into longer tool life and fewer indexings. In practice, this means steady cycle times and fewer unscheduled tool changes when turning demanding alloys. Secure clamping and straightforward holder selection As an ISO‑normed cutting tip, compatibility with a toolholder is governed by form, relief angle, tolerance class, attachment type, size and thickness. Matching these parameters ensures correct seating and repeatable positioning, reducing vibration and runout. For workshops that standardise on ISO inserts, integration into an existing holder inventory is straightforward and supports reliable component tolerances during series production. Geometry and chip control that protect the cutting edge The 55° rhombic shape combined with a 0.8 mm corner radius and an 11° relief angle offers a compromise between strength and finishing capability. The single‑sided chipbreaker guides chips away from the cut, improving surface quality and reducing the risk of built‑up edge. The insert’s cylindrical mounting hole with a single‑side countersink (40°–60°) and a plate thickness of 2.38 mm contribute to stable clamping and predictable cutting behaviour during both roughing and finishing passes. Practical system setup and application advice The insert forms one element of a complete turning system: indexable insert, matched external holder or boring bar, backing/clamping set and replacement screws. Selection of the appropriate chipbreaker and grade should be guided by the workpiece material, machining operation and machine stability. For standard external and internal turning tasks where heat‑resistant alloys are encountered, this insert represents a pragmatic balance between productivity and edge robustness. For process reliability with Tungaloy turning solutions, request tailored application guidance from Metav Werkzeuge — Metav Werkzeuge can advise on holder compatibility and availability; contact info@metav-werkzeuge.com or call +49 2822 7131930 for support and stock information. Technical data Article number: 6762760 Manufacturer SKU: TUN6762760 SKU: 6762760-Tungaloy Model series: ISO turning indexable inserts Name: DPMT070208 AH8015 Facts Corner radius: 0.8 mm Plate thickness: 2.38 mm Insert size: 07 Relief angle: 11° Included angle: 55° Special features Rhombic insert form (DPMT) PVD‑coated carbide, grade AH8015 Cylindrical hole with single‑side countersink (40°–60°) One‑sided chipbreaker Application: external and internal turning System: insert + holder + backing/clamp + replacement screws FAQ Which materials is this insert suited for? The DPMT 070208 AH8015 insert is specified as a first choice for general machining of heat‑resistant alloys and performs well where a balance of wear resistance and edge stability is required. How does the chipbreaker influence performance? The one‑sided chipbreaker on this insert promotes controlled chip formation and evacuation, helping to improve surface finish and protect the cutting edge during turning operations. What must be checked for holder compatibility? Compatibility depends on form, relief angle, tolerance class, attachment, size and thickness; ensure the holder matches the ISO DPMT form and the insert’s 11° relief and 2.38 mm thickness. What benefits does the AH8015 grade provide? AH8015 is a PVD‑coated carbide grade designed for a broad range of applications on heat‑resistant alloys, offering balanced wear resistance and stable cutting edges for consistent machining. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DPMT 070208 NS9530 Wendeplatten - Tungaloy
The combination of a sharp NS9530 cermet grade, a 0.8 mm nose radius and ISO conformity delivers consistent finishing quality and low cutting forces for turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for application matching. DPMT 070208 NS9530 indexable insert for turning — Tungaloy (0.8 mm radius, uncoated cermet) DPMT 070208 NS9530 is an ISO rhombic indexable insert designed for precision finishing in turning, offering a sharp cutting edge and optimised chip control for continuous cuts in steel ISO rhombic shape, size 07 Sharp cermet grade NS9530 0.8 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Better surface quality with lower cutting effort The uncoated NS9530 cermet substrate is engineered as a finishing grade for steel, providing a consistently sharp cutting edge that reduces cutting forces and improves surface integrity. This combination supports stable, continuous machining where small depths of cut are required, translating into fewer secondary operations and a higher first-pass yield. The material choice of uncoated cermet also minimises built-up edge risk at moderate cutting speeds, helping to maintain dimensional accuracy and repeatable part quality. Seamless integration into ISO tooling systems Designed to the ISO indexable-insert standard, the geometry and tolerances of the plate ensure compatibility when matched with an appropriate external holder, clamping set and replacement screws. Fit is determined by form, relief angle, tolerance class, fastening method, size and thickness; selecting the correct holder and shim guarantees repeatable seating and stable toolholding. A system-focused setup—insert, holder, shim/clamping set and screws—reduces setup variability and supports predictable process control on CNC lathes. Geometry and chip control for productive finishing The rhombic form and 0.8 mm nose radius balance edge strength and form accuracy, delivering fine edge detail without sacrificing toughness. The one-sided chipbreaker directs chips efficiently for finishing cuts, while the insert’s cylindrical hole with one-sided countersink (40°–60°) ensures secure clamping and repeatable orientation. The 11° relief angle and a plate thickness of 2.38 mm contribute to a stable cutting geometry that resists vibration in light finishing passes, supporting consistent surface quality and longer effective edge life. Recommended use and machining approach Intended primarily for turning, this insert is optimised for finishing operations in steel where continuous cutting and small feeds are typical. The cemented carbide body provides the rigidity needed for fine-finish tasks, while the NS9530 finishing grade helps achieve high-quality surface finishes with reduced burr formation. For best results, match the insert to a holder suited to small-depth finishing, monitor cutting forces, and choose chipbreaker and grade combinations aligned with workpiece stability to maintain productivity and part integrity. For tailored advice on integrating Tungaloy NS9530 finishing inserts into production and for ordering, contact Metav Werkzeuge — technical consultants are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6951292 Manufacturer SKU: TUN6951292 SKU: 6951292-Tungaloy Model series: ISO-Drehwendeschneidplatten Dimensions & core values Size: 07 Thickness: 2.38 mm Relief angle: 11° Included angle: 55° Nose radius: 0.8 mm Design & special features Grade: NS9530 Substrate: uncoated cermet Material: cemented carbide Shape: rhombic Hole: cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker Intended application: turning FAQ What is the primary application for this insert? The DPMT 070208 NS9530 insert is intended for turning, specifically finishing passes in steel where a sharp edge and low cutting forces are required. Which materials can be machined with the NS9530 grade? The NS9530 uncoated cermet grade is optimised for steel finishing; it provides good surface quality and reduced cutting forces in continuous cuts. How does the insert ensure repeatable clamping? The cylindrical hole with a one-sided countersink (40°–60°) and ISO-compliant geometry enable consistent seating and secure clamping when used with compatible holders and clamping sets. What are the distinguishing geometric features that aid finishing? A rhombic shape, 11° relief, 0.8 mm nose radius, and a one-sided chipbreaker combine to give fine edge detail, effective chip control and stable performance in light finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070208 NS9530 Wendeplatten - Tungaloy
Benefit from the NS9530 uncoated cermet grade and the ISO DPMT geometry for high-surface-finish turning with low cutting forces; compatibility with ISO holders ensures straightforward integration into existing tooling. Order genuine inserts directly via Metav Werkzeuge or contact our consultants for application support and availability. DPMT 070208 NS9530 DPMT turning insert (uncoated cermet, fine finishing) – Tungaloy A DPMT070208 NS9530 turning insert designed for precision finishing of steel in continuous-turning operations and small depths of cut ISO DPMT geometry for broad holder compatibility NS9530 uncoated cermet for superior surface finish Low cutting forces reduce vibration and tool load Cylindrical hole with single-sided countersink Precision finishing with consistently low cutting forces The NS9530 grade is an uncoated cermet formulated for finishing applications on steel. Its sharp cutting edge and reduced shear resistance result in low cutting forces, which minimises tool-induced vibration and supports stable machining at small depths of cut. The direct benefit is a better surface finish and fewer downstream operations, making this insert a cost-effective choice for high-quality external and internal turning where continuous cuts are common. Reliable ISO compatibility for flexible tooling arrangements Engineered to ISO dimensions, the insert follows the DPMT form and tolerance classes so that fitment to standard holders is straightforward. The specifications — including the 11° clearance angle, 55° included angle and defined thickness — ensure repeatable seating, clamping and run-out behaviour in both external holders and boring bars. The presence of a cylindrical hole with a single-sided countersink (40°–60°) adds mechanical stability for positive clamping and quick replacement in production environments. Optimised chip control and improved process stability With a one-sided chipbreaker designed for continuous cutting and small depth-of-cut operations, chip formation is controlled to reduce entanglement and improve swarf evacuation. This targeted chip control, paired with the cermet’s low cutting forces, enhances process stability and supports consistent component quality. For manufacturers aiming to reduce rework and maintain throughput, this insert helps secure predictable surface integrity and repeatable cycle times. Contact Metav Werkzeuge for application-specific advice or to reserve genuine Tungaloy DPMT070208 NS9530 inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss compatibility and stock availability Technical data Article number: 6951354 Manufacturer SKU: TUN6951354 SKU: 6951354-Tungaloy Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Core specifications ISO designation: 070208 Insert size: 07 Thickness: 2.38 mm Relief angle: 11° Included angle: 55° Corner radius: 0.8 mm Hole: with hole — cylindrical hole + single-sided countersink (40°–60°) Features / Applications Grade: NS9530 (uncoated cermet) Chipbreaker: one-sided Application: turning; finishing steel; continuous cuts; small depths of cut Material: cemented carbide body Compatibility: ISO DPMT geometry for standard holders and boring bars Plate shape: rhombic FAQ Is this insert suitable for finishing steel components? This DPMT070208 NS9530 insert (SKU 6951354-Tungaloy) is specifically developed as a finishing grade for steel, offering low cutting forces and a fine surface finish in continuous-turning applications. Which holder types accept the DPMT 070208 geometry? The ISO DPMT geometry matches a wide range of standard external holders and boring bars; compatibility depends on form, relief angle, tolerance class and clamp style. What are the benefits of the NS9530 uncoated cermet grade? The NS9530 uncoated cermet provides a sharp cutting edge, reduced shear forces and excellent surface integrity, making it ideal where small depths of cut and continuous cuts are required. How does the hole and countersink influence clamping? The cylindrical hole with a single-sided countersink (40°–60°) provides secure mechanical location and reliable clamping, improving repeatability during insert changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070208 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of low cutting forces, a sharp uncoated cermet edge (NS9530) and ISO compatibility for consistent finishing results; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DPMT 070208 NS9530 — ISO rhombic turning insert for precision finishing, Tungaloy DPMT 070208 NS9530 is an ISO rhombic turning insert designed for finishing operations on steel, offering a sharp cutting edge and a format compatible with standard ISO holders. Rhombic insert size 07 Cermet grade NS9530 for finishing 11° clearance angle for sharp cutting Cylindrical hole with countersink High-precision finishing with reduced cutting forces The insert combines an uncoated cermet composition with a finely honed geometry to deliver low cutting forces and an excellent surface finish during continuous turning operations. The NS9530 grade is optimised as a finishing sort for steel, providing a sharp cutting edge and stable edge retention at small depths of cut. Thanks to the fine-grain substrate and polished cutting face, the component machining process often requires fewer secondary operations, saving cycle time and lowering total process cost while maintaining dimensional consistency. Reliable fit and secure mounting for ISO systems As an ISO-compliant rhombic insert, the item integrates into standard turning systems where compatibility depends on shape, relief angle, tolerance class, fastening and thickness. The rhombic geometry and cylindrical hole with single-sided countersink (40°–60°) ensure reproducible seating and clamping in matching holders, while the 11° clearance and 55° included angle support effective chip formation for finishing cuts. Choosing the correct holder and clamping set maintains repeatability and avoids unexpected tool movement, which protects workpiece quality. Material behaviour and machining advantages of the cermet grade Built on a cemented carbide substrate and finished as an uncoated cermet, the insert excels in continuous-feed finishing of steel by reducing built-up edge and improving edge stability at low to moderate cutting speeds. The cermet chemistry offers a balance between wear resistance and a fine cutting edge, which translates into superior surface quality on turned components. This behaviour makes the insert well suited for both external and internal turning where smooth, consistent surfaces are required and where small feeds and light depths of cut are the norm. Productivity improvements and selection guidance Selecting this insert with the appropriate single-sided chipbreaker and matching grade for the workpiece stability enhances productivity by reducing rework and inspection time. The modest corner radius (0.8 mm) supports fine finishing without compromising dimensional control, while the standardised ISO 070208 designation simplifies tool management and reordering. For applications requiring high surface integrity, this combination of geometry and NS9530 grade delivers repeatable results and contributes to overall process efficiency. For tailored tool recommendations or to source Tungaloy inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance and availability. Technical data Article number: 6762759-Tungaloy Manufacturer article number: 6762759 SKU: TUN6762759 Dimensions & core data ISO designation: 070208 Size code: 07 Thickness: 2.38 mm Clearance angle: 11° Included angle: 55° Corner radius: 0.8 mm Materials & special features Material: cemented carbide Grade / coating: NS9530 — uncoated cermet Plate shape: rhombic Hole: with hole — cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning — external and internal turning; finishing operations Compatibility: ISO turning insert — fit depends on holder form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The DPMT 070208 NS9530 Tungaloy indexable insert is optimised for machining steel in finishing operations; the uncoated cermet composition provides a sharp edge and good surface results on continuous cuts. How does the NS9530 grade affect tool performance? NS9530 is an uncoated cermet grade that offers low cutting forces and high-quality surface finish, making it suitable for small depths of cut and continuous turning where edge sharpness is essential. Which holders and clamping systems are compatible? Compatibility is determined by ISO form, relief angle, tolerance class, fastening method, size and thickness; the rhombic shape and cylindrical hole with countersink ensure secure seating in standard ISO-compatible holders. What role does the chipbreaker play in finishing? The single-sided chipbreaker of this insert aids controlled chip formation during finishing feeds, supporting stable cutting action and improved surface integrity with reduced risk of built-up edge. What is the manufacturer SKU for reordering? The SKU for this Tungaloy insert is 6762759-Tungaloy (manufacturer article number 6762759). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070208 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T6215 carbide and a rhombic ISO geometry for stable turning of stainless steel; the robust 2.38 mm plate thickness and secure hole design ensure consistent clamping and repeatable results. Order the DPMT070208 T6215 insert directly via Metav Werkzeuge or ask the consultants for tailored application advice. DPMT070208 T6215 DPMT ISO 070208 turning indexable insert by Tungaloy, CVD-coated carbide DPMT070208 T6215 is an ISO‑standard rhombic indexable insert designed for turning, optimised for stainless steel under stable to slightly interrupted cutting conditions CVD-coated carbide T6215 for stainless steel ISO DPMT 070208 rhombic insert, 11° clearance 0.8 mm nose radius for consistent surface quality 2.38 mm plate thickness with cylindrical hole Consistent wear resistance for uninterrupted production The CVD coating of the T6215 grade provides elevated wear resistance and thermal stability, which translates into a longer effective life of the carbide body during challenging turning operations. When machining stainless steel, the coating reduces adhesive wear and improves edge stability under continuous cutting, so the toolholder and insert work together to maintain feed and tolerance windows. This results in fewer tool changes and more predictable cycle times, supporting efficient production planning and improved machine utilisation. Precisely engineered geometry for reproducible surfaces The ISO DPMT 070208 rhombic shape with an 11° clearance angle and a 0.8 mm nose radius delivers a balance between edge strength and surface finish. The 55° included angle and the 2.38 mm plate thickness increase rigidity at the cutting edge, reducing chatter and vibration in both external and internal turning operations. The insert’s cylindrical hole with a single‑sided countersink ensures secure clamping and repeatable positioning in compatible holders, which is essential for achieving reproducible tolerances and consistent part quality. Easy integration and application-oriented versatility As part of a standard ISO system, the insert integrates into common holders and boring bars; compatibility is defined by form, clearance angle, tolerance class, attachment and thickness. The single‑sided chipbreaker geometry aids chip control when combined with the correct cutting data for the workpiece and machine rigidity. For job shops and production lines focusing on stainless steel, this insert offers a pragmatic mix of process reliability and predictable cutting behaviour, making tool selection and inventory management simpler and more efficient. For specific cutting data, recommendations for chipbreaker selection or holder compatibility with the Tungaloy DPMT070208 T6215 insert, please contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for personalised advice and rapid availability. Technical data Article number: 6951284 SKU: 6951284-Tungaloy Manufacturer SKU: TUN6951284 Model series: ISO turning indexable inserts Designation: DPMT070208 Grade: T6215 Facts Included angle: 55° Clearance angle: 11° Nose radius: 0.8 mm Plate thickness: 2.38 mm Plate size: 07 Special features Material: carbide Coating: T6215 (CVD) Shape: rhombic Hole: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning, external and internal machining Compatibility: ISO DPMT 070208 holders and clamping systems FAQ What materials is this insert suitable for? The DPMT070208 T6215 insert is optimised for machining stainless steel and performs well under stable to slightly interrupted cutting conditions. How does the T6215 coating improve performance? The CVD T6215 coating increases thermal and wear resistance on the carbide substrate, improving edge life and cutting stability when turning stainless steel. Which holder types are compatible with this insert? Compatibility depends on holder form, clearance, tolerance class, attachment, size and thickness; the insert is ISO‑standard DPMT 070208 and fits corresponding external and internal turning holders. Can this insert be used for finish passes? Yes, the 0.8 mm nose radius and rigid 2.38 mm plate thickness support good surface quality during finishing when combined with appropriate feeds and speeds. Is chip control provided by the geometry? The single‑sided chipbreaker and rhombic geometry assist chip formation and evacuation, but correct chipbreaker choice and cutting parameters are important for optimal control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070208 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD‑coated, wear‑resistant T6215 grade and a 0.8 mm corner radius to extend tool life and maintain consistent surface finish during turning operations; order original Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for compatibility advice. DPMT 070208 T6215 Tungaloy ISO turning insert — rhombic 07, 55° A DPMT070208 T6215 ISO rhombic turning insert engineered for reliable machining of stainless steels under stable to slightly interrupted cutting conditions. CVD-coated wear-resistant grade T6215 ISO rhombic insert size 07, 55° geometry 0.8 mm corner radius for robust profile Cylindrical hole with 40°–60° countersink Predictable performance for machining stainless steels The combination of a CVD‑coated surface and a wear‑resistant substrate delivers a predictable tool life in demanding turning operations. The coating reduces flank wear and heat buildup, while the carbide core maintains edge stability; together these features support consistent component tolerances and fewer tool changes. For shops machining rostfreier Stähle, this means reduced downtime and improved process reliability without changing cutting strategy. Secure seating and dimensional compatibility reduce process variation Compatibility with a holder is determined by the insert shape, clearance angle, tolerance class, fastening and thickness; the ISO series construction ensures straightforward interchangeability in standard holders. The ISO format, rhombic 07 profile and 55° main cutting geometry provide a balance of accessibility and strength, while the cylindrical hole with single‑side countersink (40°–60°) guarantees repeatable clamping and stable tool indexation. Clear dimensioning simplifies tooling lists and reduces setup time. Designed grade and geometry for efficient, economical turning The T6215 grade combines a tough substrate with a protective coating, making it especially suitable for turning of rostfreier Stähle under stable to slightly interrupted conditions. The 0.8 mm corner radius supports a robust cutting edge for general finishing and light roughing, and the 2.38 mm plate thickness adds rigidity in overhung setups. Selecting this insert can improve first‑pass yield and lower per‑part tooling cost through extended service intervals. Practical benefits for the workshop and procurement Standardised ISO designation and clear technical attributes make stock management and reordering straightforward. The insert’s geometry and hole style facilitate fast replacement and safe clamping, while the wear‑optimised grade helps maintain surface finish targets with fewer adjustments. Where process stability and repeatability are priorities, this indexable insert supports lean machining workflows and predictable throughput. For tailored technical advice or to procure original Tungaloy turning inserts, contact Metav Werkzeuge for precise compatibility checks and ordering: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6951351 SKU: 6951351-Tungaloy Model series: ISO turning inserts ISO designation: 070208 Application: turning Core specifications Corner radius: 0.8 mm Plate thickness: 2.38 mm Main geometry angle: 55° Clearance angle: 11° Hole: cylindrical hole with 40°–60° countersink Special features Material: carbide Coating/grade: T6215 (CVD-coated) Insert shape: rhombic, size 07 Chipbreaker: single-sided Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suited for? The DPMT070208 T6215 insert is formulated for machining rostfreier Stähle and performs best under stable to slightly interrupted turning conditions. How does the T6215 grade affect tool life? The T6215 CVD coating on a robust carbide substrate reduces flank wear and heat generation, helping the insert deliver longer life and consistent surface quality. Which holder features are required for correct seating? Correct seating depends on matching the insert’s rhombic form, 11° clearance, tolerance class, fastening and thickness to the chosen external holder or boring bar. Can this insert be used for finishing and light roughing? Yes, the 0.8 mm corner radius and 2.38 mm thickness make the insert suitable for finishing and light roughing, offering a compromise between edge strength and surface finish. Is the product indexable and easy to replace during production? The ISO format and the cylindrical hole with countersink enable secure clamping and straightforward indexable replacement, supporting quick tool changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070208 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that is engineered for stable to slightly interrupted turning of stainless steels, combined with a compact 55° rhombic geometry and a 0.8 mm corner radius for consistent surface quality; order through Metav Werkzeuge or consult the technical team for application-specific advice. DPMT 070208 T6215 indexable turning insert — CVD-coated carbide, 55° geometry, Tungaloy A DPMT 070208 T6215 indexable turning insert designed for external and internal turning under stable to lightly interrupted conditions, optimised for machining stainless steels. CVD-coated carbide T6215 for stainless steels 55° rhombic geometry for versatile turning 0.8 mm corner radius for consistent surface finish Cylindrical hole with countersink (40°–60°) Reliable performance for stainless steel turning The CVD-coated carbide grade delivers a wear-resistant cutting edge that is particularly suited to machining stainless steels under stable cutting conditions. The coating and substrate combination is selected to reduce flank wear and maintain dimensional accuracy over longer tool life, which contributes directly to lower tool-change frequency and improved process economy. The carbide substrate supports steady cutting forces, while the CVD-coated surface helps resist adhesive wear and workpiece-material build-up. Geometry and finish control that benefit production output A 55° rhombic geometry and a 0.8 mm corner radius enable a balance between cutting edge strength and finish capability, allowing operators to achieve reliable part geometry with fewer passes. The insert’s one-sided chipbreaker eases chip formation for interrupted cuts, helping to avoid tool damage during light interruptions. As a result, cycle times can be optimised and surface quality maintained without aggressive machining parameters. Secure clamping and straightforward integration into ISO tool systems This ISO-compliant insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure fastening in compatible holders; compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The ISO indexable insert format simplifies tool inventory management and enables quick replacements on standard external holders and boring bars, reducing machine downtime and streamlining set-up routines. Practical selection and application guidance for workshop use For turning tasks where process stability and consistent output matter, the Tungaloy grade offers predictable wear characteristics and easy integration into mixed-production settings. Choose workholding and cutting parameters in line with material characteristics and machine rigidity; the insert’s design supports common workshop strategies such as modest depth of cut and controlled feed to enhance tool life. When selecting a chipbreaker and grade, align the choice with the specific stainless steel variant and the nature of the cut. For reliable machining with Tungaloy CVD-coated inserts, contact Metav Werkzeuge for a tailored recommendation or to request a specification sheet; Metav Werkzeuge can advise on holder compatibility and process parameters via info@metav-werkzeuge.com or by telephone on +49 2822 7131930. Technical data Article number: 6945269 Manufacturer SKU: TUN6945269 Item label: DPMT070208 T6215 Tungaloy insert Facts Thickness: 2.38 mm Corner radius: 0.8 mm Free clearance angle: 11° Included angle: 55° Size designation: 07 Special features Material: carbide (Hartmetall) Coating: CVD (grade T6215) Chipbreaker: one-sided Hole: with cylindrical hole and single-sided countersink (40°–60°) Plate form: rhombic Typical application: turning (external and internal) Series: ISO indexable turning inserts Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is this insert designed to machine? The Tungaloy DPMT 070208 T6215 is formulated to machine stainless steels effectively under stable to slightly interrupted cutting conditions. How does the 0.8 mm corner radius affect surface finish? A 0.8 mm corner radius increases edge strength while producing a consistent surface finish, reducing the risk of edge chipping on work-hardened varieties of stainless steel. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; the ISO format enables use with standard external holders and boring bars designed for DPMT-style inserts. What does the hole and countersink specification mean for clamping security? The cylindrical hole with a single-sided countersink (40°–60°) provides secure clamping and precise seating in holders, reducing movement and improving repeatability during production. Is this insert suitable for interrupted cuts? The T6215 grade and one-sided chipbreaker are aimed at stable to lightly interrupted conditions; for heavy interruptions, a grade and geometry specifically designed for robust shock resistance is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070208 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide wear resistance, reliable fracture toughness and a compact 55° rhombic geometry for stable turning. Order the DPMT070208 T9215 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. DPMT 070208 T9215 indexable insert for turning by Tungaloy A DPMT070208 T9215 indexable insert engineered for medium-steel turning, offering a rhombic 07 form with a 55° cutting angle for stable external and internal machining. CVD-coated carbide for superior wear resistance Optimised for medium steel machining Rhombic 07 shape with 55° cutting angle Cylindrical hole with single-side countersink 0.8 mm corner radius for consistent profiles Stable engagement for consistent profile generation The insert’s rhombic geometry and 55° cutting angle deliver repeatable engagement and predictable cutting forces, which helps maintain dimensional accuracy on external and internal contours. The 0.8 mm corner radius supports smooth profile transitions while the single-sided chipbreaker controls swarf formation under continuous and lightly interrupted cuts. These characteristics translate into fewer workpiece rejects and steadier process performance, particularly when machining medium-grade steels. Easy integration with standard holders and clamping systems Compatibility with a toolholder is determined by form, clearance angle (11°), tolerance class, fastening method, size and thickness; the DPMT070208 is designed to fit ISO-standard toolholders that accept rhombic 07 inserts. The plate’s cylindrical hole with single-side countersink (40°–60°) permits secure clamping and simple replacement of screws or shims, supporting rapid index changes and consistent repeatability. For tailored holder recommendations or dimensional checks, technical support is available at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Longer tool life and improved productivity The T9215 grade combines a robust substrate with CVD coating, providing high wear resistance while retaining fracture toughness for reliable performance in continuous to lightly interrupted operations. This balance reduces the rate of insert changes and unplanned stoppages, improving overall throughput and lowering per-part tooling costs. Where process stability allows, higher cutting speeds can be employed to shorten cycle times without compromising tool life. Practical application guidance for consistent results Select the T9215 grade and the single-sided chipbreaker when machining medium steels where a mix of abrasion resistance and edge strength is needed. Match feed and speed to component material and setup rigidity, and choose a holder that supports the rhombic 07 form and the insert’s 2.38 mm plate thickness. The result is a robust turning solution that delivers repeatable surface finish and dimensional control over production runs. For high-productivity medium-steel turning with Tungaloy’s T9215 CVD-coated carbide, contact Metav Werkzeuge for ordering and specialist advice. Technical data Article number: 6951349 Manufacturer SKU: TUN6951349 Our SKU: 6951349-Tungaloy Designation: DPMT070208 Model series: ISO turning indexable inserts Facts Corner radius: 0.8 mm Cutting angle: 55° Clearance angle: 11° Plate thickness: 2.38 mm Size: 07 Special features Material: Carbide Coating / Grade: T9215 (CVD-coated) Chipbreaker: Single-sided Hole style: Cylindrical hole with single-side countersink (40°–60°) Plate shape: Rhombic Application: Turning (external and internal) Suitable for continuous to light interrupted cuts Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert best suited for? The T9215 grade is optimised for medium steel machining; the DPMT070208 T9215 indexable insert performs well in continuous to lightly interrupted steel turning operations. What features of the insert improve productivity? The combination of a CVD-coated carbide substrate, single-sided chipbreaker and a 55° rhombic geometry reduces wear and limits fractures, allowing longer runs and fewer index changes for the insert SKU 6951349-Tungaloy. How is holder compatibility ensured for this insert? Compatibility is determined by holder form, clearance angle (11°), tolerance class, fastening type, insert size and thickness; secure clamping is supported by the cylindrical hole and single-side countersink. Can the insert be used for interrupted cuts? Yes, the grade and geometry are suitable for continuous and light interrupted cuts, where the grade’s fracture toughness and wear resistance balance process demands. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070208 T9215 Wendeplatten - Tungaloy
Take advantage of a high-performance, CVD-coated carbide grade that combines wear resistance and fracture toughness for productive turning of medium steels; the insert’s precise geometry and 0.8 mm corner radius support consistent surface finish and tool life. Order directly via Metav Werkzeuge or consult their specialists for application matching and immediate availability. DPMT 070208 T9215 – Indexable Turning Insert for Turning by Tungaloy The DPMT070208 T9215 is an ISO-standard rhombic indexable insert tailored for external and internal turning of medium steels, offering a balanced mix of durability and productivity. CVD-coated carbide for high wear resistance 0.8 mm corner radius for versatile finishing 11° clearance angle for stable cutting geometry Compatible with ISO turning holders, with cylindrical hole and countersink Productive grade for medium steel turning The T9215 grade is a CVD-coated carbide engineered as a first choice for medium steel machining. Its coating and substrate combination provide high wear resistance while maintaining fracture resistance, which supports elevated material removal rates and consistent tool life under continuous to lightly interrupted cuts. This combination reduces unplanned tool changes and helps to maintain cycle-time targets on component runs, making the insert suitable for production environments where repeatability and economy are priorities. Accurate geometry for reliable chip control and tool life Built in a rhombic form with a nominal 55° approach angle and an 11° clearance angle, the geometry supports a stable cutting edge and controlled chip flow. The 0.8 mm corner radius balances edge strength with finishing capability, while the single-sided chipbreaker is designed to guide chips effectively in many turning operations. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to ensure secure clamping; compatibility with holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. These factors should be matched to the chosen holder and machining strategy to achieve the best performance. System integration, interchangeability and economical operation As part of a standard ISO insert system, this plate works together with a matching external holder or boring bar, a shim/clamping set and replacement screws to create a robust tooling assembly. The 2.38 mm plate thickness and size designation 07 permit simple indexation and fast replacement, minimising downtime. Using a grade optimised for the workpiece material and cutting conditions allows for longer tool life and fewer insert changes, which delivers measurable cost advantages across production batches. For applications requiring specific chip control or surface finish, select the matching chipbreaker and adjust feeds and speeds to the stability of the setup. Contact Metav Werkzeuge for expert advice on Tungaloy turning inserts, compatibility checks and secure supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6945266 SKU: 6945266-Tungaloy Manufacturer SKU: TUN6945266 Model series: ISO turning inserts Core Data Approach angle: 55° Corner radius: 0.8 mm Clearance angle: 11° Plate thickness: 2.38 mm Size: 07 ISO designation: 070208 Special features Material: carbide Coating / grade: T9215 (CVD-coated carbide) Plate form: rhombic Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) System: ISO indexable insert, compatible with ISO holders FAQ Which materials is this grade designed for? The T9215 grade in the DPMT070208 T9215 insert from Tungaloy is optimised for medium steel machining and delivers a balance of wear resistance and toughness for productive turning. Can the insert be used for internal turning operations? Yes, the rhombic shape and chipbreaker design allow the insert to be used for both external and internal turning when mounted in a suitable ISO boring bar or holder. How does the CVD coating benefit the insert’s performance? The CVD-coated carbide construction extends tool life through improved wear resistance and thermal stability, enabling higher productivity during continuous to lightly interrupted cuts. What determines compatibility with a turning holder? Compatibility is defined by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; ensure the holder matches these parameters for secure clamping and correct cutting geometry. What is the significance of the 0.8 mm corner radius? A 0.8 mm radius offers a compromise between edge strength and surface finish capability, making it suitable for general finishing and medium-depth turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070208 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated cemented carbide T9215, precise 55° rhombic geometry and a secure fixing system for efficient, repeatable turning of medium‑grade steels; order directly via Metav Werkzeuge or consult our specialists for application support. DPMT 070208 T9215 ISO turning insert — rhombic 55° geometry by Tungaloy The DPMT 070208 T9215 is an ISO‑standard rhombic turning insert designed for external and internal turning of medium‑grade steels CVD‑coated cemented carbide T9215 for wear resistance Ideal for medium‑steel turning applications Rhombic insert with 55° cutting angle 0.8 mm corner radius for reliable finishes Consistent productivity for medium‑steel turning The CVD‑coated cemented carbide grade T9215 combines high wear resistance with fracture toughness, making it suitable for sustained productivity in continuous to slightly interrupted cuts. The coating reduces flank wear and extends tool life under stable cutting conditions, while the carbide substrate preserves edge strength where tool engagement varies. For machining tasks where consistent component quality and predictable tool change intervals matter, this grade offers an economically efficient balance between life and performance. Compatibility with ISO holder systems ensures predictable clamping and repeatability across tool changes. Geometry and edge preparation that improve surface quality A rhombic 55° geometry with a 0.8 mm corner radius and a clearance angle of 11° provides a favourable compromise between cutting edge strength and surface finish. The insert thickness of 2.38 mm contributes to rigidity in the holder, reducing vibration in light‑to‑moderate cuts. The single‑sided chipbreaker geometry controls chip flow for turning of steel grades, promoting stable cutting and easier chip evacuation. In practical terms, the combination of specified edge radius and angle yields finer finishes on shafts and bores while maintaining durable cutting performance during longer production runs. System compatibility and practical set‑up for workshop use As an ISO‑standard turning insert, the plate requires a compatible external holder or boring bar, plus a suitable pad/clamp set and replacement screws for secure mounting. Compatibility depends on insert shape, clearance angle, tolerance class, fixing method, size and thickness — these parameters ensure correct seating and consistent cutting geometry. The plate is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) for positive securing; selecting a holder that matches these features ensures safe clamping and repeatable positioning. For typical applications — external turning, internal turning and medium steel workpieces — select the chipbreaker and grade to suit material, process stability and the intended feed/speed range. For reliable, high‑productivity turning with Tungaloy CVD‑coated inserts, contact Metav Werkzeuge for tailored application advice and stock information — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951282 SKU: 6951282-Tungaloy Manufacturer SKU: TUN6951282 Designation: DPMT070208 T9215 (Tungaloy insert) Model series: ISO turning inserts Material: cemented carbide Facts Corner radius: 0.8 mm Thickness: 2.38 mm Cutting angle: 55° Clearance (free) angle: 11° Size: 07 Special features CVD‑coated cemented carbide grade T9215 Rhombic form, single‑sided chipbreaker Cylindrical hole with one‑sided countersink (40°–60°) ISO‑standard turning insert Suited for external and internal turning For continuous to slightly interrupted cuts FAQ Is this insert suitable for external turning of medium‑strength steels? The DPMT 070208 T9215 insert is optimised for medium‑grade steel turning; the T9215 CVD coating and carbide substrate offer wear resistance and edge strength appropriate for external turning operations. What holders are compatible with the DPMT 070208 geometry? Compatibility is determined by insert form, size 07, thickness 2.38 mm, clearance angle 11° and the 55° geometry; choose an ISO‑compatible external holder or boring bar that accepts rhombic DPMT inserts with the specified fixing and tolerance class. How does the 0.8 mm corner radius affect the finish and tool life? A 0.8 mm corner radius increases edge strength compared with finer radii, improving resistance to edge chipping and supporting better surface finish under steady cutting conditions. Can the insert be used for interrupted cuts? The T9215 grade is designed for continuous to slightly interrupted cuts; for heavy interruptions, consider grades and chipbreakers tailored to increased shock loading. What is the purpose of the countersunk hole design? The cylindrical hole with a one‑sided countersink (40°–60°) provides secure positive locating and clamping, ensuring repeatable seating and consistent cutting geometry when used with matching clamping sets. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DPMT 070208 T9225 Wendeplatten - Tungaloy
Robust CVD-coated carbide and a compact rhombic form deliver stable cutting under variable conditions; the T9225 grade balances toughness and wear resistance for medium-to-heavy steel turning. Order the DPMT070208 insert via Metav Werkzeuge or consult our advisors for holder compatibility and optimal chipbreaker selection. DPMT 070208 T9225 Turning Insert by Tungaloy DPMT070208 T9225 Tungaloy insert — an ISO rhombic turning insert designed for reliable external and internal turning in steel applications CVD-coated carbide T9225 grade Robust universal grade for steel machining Rhombic insert, size 07 0.8 mm corner radius for strength Cylindrical hole with one-sided countersink High productivity through a balanced grade and coating The DPMT070208 combines a CVD-coated carbide substrate with the T9225 grade to provide a balance of wear resistance and fracture toughness. This composition is aimed at medium-to-heavy steel machining where interrupted cuts or variable engagement demand a tougher grade. The coating reduces flank wear and extends tool life in batch production, which translates into fewer indexings and reduced machine downtime. The result is measurable improvement in cycle times and a stable tool life curve for repetitive turning operations. Geometry that supports secure clamping and consistent results A rhombic 07 form and a 0.8 mm corner radius add mechanical strength at the cutting edge, while the 55° included angle optimises cutting force distribution for turning tasks. The insert’s ISO-standard dimensions and 2.38 mm thickness make the compatibility with standard holders straightforward; however, secure clamping depends on matching form, clearance angle and size. This geometry reduces vibration sensitivity and helps maintain dimensional accuracy across production runs, supporting consistent surface quality and repeatability in component manufacture. Versatile mounting and chip control for varied turning conditions Equipped with hole and a cylindrical hole + one-sided countersink (40°–60°), the insert is suitable for positive axial fixing and straightforward seating in many clamping systems. The single-sided chipbreaker supports predictable chip formation in many steels, aiding evacuation and reducing heat concentration at the cutting edge. Selection of the chipbreaker and grade should follow the workpiece material, machining stability and desired surface finish. When paired with a correctly specified holder, the combination supports efficient swarf removal and longer edge life. Practical selection and application guidance for workshops The design and material combination emphasise productive turning where workpiece material and process stability vary. Choose the T9225 grade for jobs where toughness is required without sacrificing wear resistance. Ensure holders match the insert by form, clearance angle, tolerance class, fastening method, size and thickness to achieve the stated benefits. For interrupted cuts or semi-stable setups, this insert gives a reliable compromise between edge strength and wear performance, reducing the need for frequent tool changes and supporting throughput targets. Contact Metav Werkzeuge for genuine Tungaloy inserts and tailored holder advice; email info@metav-werkzeuge.com or call +49 2822 7131930 to confirm fitment and recommendations Technical data Article number: 6781352 Manufacturer SKU: TUN6781352 SKU: 6781352-Tungaloy Model series: ISO turning inserts Designation: DPMT070208 Material: carbide Grade/coating: CVD-coated carbide T9225 Core data Corner radius: 0.8 mm Clearance angle: 11° Included angle: 55° Thickness: 2.38 mm Size: 07 Manufacturer item number: 6781352 Special features Rhombic insert form Single-sided chipbreaker Cylindrical hole + one-sided countersink (40°–60°) ISO-standard turning insert for external and internal turning Robust universal grade for medium-to-heavy steel machining Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The DPMT070208 T9225 insert is formulated as a robust universal grade for steel machining and performs well in medium-to-heavy turning where toughness and wear resistance are both required. How does the grade affect interrupted cuts? The T9225 grade offers elevated toughness compared with purely wear-focused grades, so the insert tolerates light interruptions and variable engagement better while maintaining acceptable wear rates. Which holder factors are critical for compatibility? Compatibility relies on matching the insert’s form, clearance angle, tolerance class, fastening method, size and thickness. Ensure the holder accommodates the rhombic 07 shape and 2.38 mm thickness. Can the insert provide good chip control in turning? Yes — the single-sided chipbreaker is designed to promote consistent chip formation in many steels; combined with the hole and countersink it aids secure clamping and reliable chip evacuation. Is the insert suitable for both external and internal turning? The ISO rhombic geometry and mounting style make the insert suitable for both external and internal turning applications when paired with an appropriate holder and stable setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070208 T9225 Wendeplatten - Tungaloy
Benefit from robust CVD‑coated carbide performance and ISO compatibility for reliable medium‑to‑heavy steel turning; the rhombic insert with an 11° clearance and 0.8 mm corner radius delivers controlled chips and consistent tool life. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. DPMT 070208 T9225 – ISO rhombic turning insert by Tungaloy, CVD‑coated carbide DPMT 070208 T9225 is an ISO‑standard rhombic turning insert optimised for medium‑to‑heavy steel turning and variable engagement conditions Rhombic ISO insert DPMT 070208 CVD-coated carbide grade T9225 Single-sided chipbreaker for steel 11° clearance, 0.8 mm corner radius Consistent cutting performance for variable turning conditions The CVD‑coated carbide grade T9225 is formulated as a robust universal grade for medium‑to‑heavy steel turning, providing increased toughness where interrupted cuts or changing engagement occur. The coating improves wear resistance without sacrificing fracture toughness, which means longer service intervals and fewer unexpected tool changes. By combining the grade with a well‑designed single‑sided chipbreaker, the insert aids in predictable chip formation and evacuation, reducing the risk of workpiece damage and helping to maintain cycle times in recurring production runs. Geometry and clamping features that support repeatable results Engineered as a rhombic insert with a 0.8 mm corner radius and 11° clearance, the geometry balances strength at the cutting edge with accessibility for finishing passes. The insert is ISO‑standard, so compatibility with suitable external holders or boring bars is determined by form, clearance, tolerance class, fastening style, size and thickness — all standardised elements that permit straightforward tool selection. The cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping and correct seat orientation, which contributes to repeatable positioning and stable machining, especially on heavier sections or when tool overhang is unavoidable. Practical handling and machining efficiency in daily use With a plate thickness of 2.38 mm and the proven Tungaloy grade, the insert combines strength with ease of indexation. The single‑sided chipbreaker simplifies tool setup and is adaptable to both external and internal turning applications. The modest corner radius promotes edge resilience while allowing productive cutting parameters; this helps to lower tooling costs per part and improves process stability. For workshops aiming to balance productivity with predictable tool life, the insert offers a durable solution that reduces downtime and supports consistent surface finishes on steel components. For tailored advice on selecting the right turning insert and immediate availability of Tungaloy products, contact Metav Werkzeuge for expert consultation and efficient delivery. Technical data Article number: 6951283 Manufacturer SKU: TUN6951283 Model series: ISO turning inserts Designation: DPMT070208 Facts Corner radius: 0.8 mm Clearance angle: 11° Insert size: 07 Thickness: 2.38 mm Lead angle: 55° Special features Carbide substrate, CVD-coated Grade: T9225 Rhombic insert form Single-sided chipbreaker Cylindrical hole + one-sided countersink (40°–60°) With hole Application: turning FAQ Which holder types are compatible with this insert? Compatibility depends on holder form, clearance, tolerance class, fastening and insert size; the DPMT 070208 T9225 is ISO‑standard and fits holders designed for DPMT‑type rhombic inserts of size 07. What materials is the insert suitable for? The T9225 grade is a universal, robust carbide suited for medium‑to‑heavy machining of steel; it performs well under varying engagement and slightly interrupted cuts. Why does the insert have a countersunk hole? The cylindrical hole with a single‑side countersink (40°–60°) provides secure, repeatable clamping and correct seating in indexable toolholders, enhancing stability during turning with the DPMT 070208 T9225 insert. Can the insert be used for internal turning? Yes; the insert’s rhombic form and chip control features make it suitable for both external and internal turning applications when paired with the appropriate boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070208 T9225 Wendeplatten - Tungaloy
Combining a CVD-coated carbide substrate, the robust T9225 grade and a 0.8 mm corner radius, this ISO rhombic insert delivers reliable edge life and stable chip formation for medium-to-heavy steel turning; order directly via Metav Werkzeuge or request targeted application advice from our consultants. DPMT 070208 T9225 turning insert by Tungaloy — rhombic ISO insert, CVD-coated carbide DPMT 070208 T9225 is an ISO-standard rhombic indexable insert designed for external and internal turning, offering a robust universal grade for variable cutting conditions in steel machining CVD-coated carbide grade T9225 For medium-to-heavy steel turning Rhombic ISO insert DPMT 070208 0.8 mm corner radius, cylindrical hole Productivity through robust grade and coating The combination of a CVD-coated surface and a carbide substrate provides a durable cutting edge that withstands interrupted cuts and fluctuating engagement. The T9225 grade is formulated for medium-to-heavy steel turning, delivering extended tool life and consistent surface finish where toughness is required. This results in fewer tool changes and higher machine uptime, which directly improves throughput and lowers per-part machining cost. Secure fit and fast changeovers for stable machining Designed as an ISO rhombic insert, the geometry and the cylindrical hole with one-sided countersink (40°–60°) ensure positive seating and repeatable clamping in compatible holders. The 11° clearance and 55° included angle support stable cutting forces and predictable chip flow when paired with an appropriate single-sided chipbreaker. The 0.8 mm corner radius balances edge strength with the ability to achieve the required contour accuracy on external and internal profiles. Practical selection and application guidance Choosing the correct chipbreaker and the T9225 grade enables productive machining across a broad range of steels, including alloyed and carbon steels under varying stability conditions. The insert thickness of 2.38 mm and size 07 make it compatible with standard external holders and boring bars for ISO DPMT-type geometries. For operations that demand robustness rather than the finest finish, this insert offers a reliable compromise between wear resistance and toughness, reducing process variation and rework. For robust medium-to-heavy steel turning with Tungaloy's T9225 grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and fast supply. Technical data Article number: 6951350 Manufacturer SKU: TUN6951350 SKU: 6951350-Tungaloy Model series: ISO turning inserts Material: carbide Grade: T9225 Facts ISO designation: DPMT070208 Size: 07 Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 55° Special features Rhombic insert shape Cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker CVD-coated carbide For medium-to-heavy steel turning Compatible with matching external holders and boring bars FAQ What materials is this insert suitable for? The insert is optimised for steel machining; the T9225 grade offers toughness and wear resistance for medium-to-heavy steel turning applications. Which holder type fits this ISO insert? This rhombic DPMT 070208 insert fits holders and boring bars designed for DPMT-style ISO inserts, using the cylindrical hole and countersink for secure clamping. How does the T9225 grade perform with interrupted cuts? Tungaloy's T9225 grade is engineered for robust performance under variable engagement and light interruptions, providing stable edge life and reduced edge chipping. What is the typical benefit of the 0.8 mm corner radius? A 0.8 mm radius increases edge strength for heavier cuts while still enabling acceptable profile accuracy and surface quality in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 11T302 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade designed for reliable turning of stainless steels, combined with a precise 0.2 mm corner radius and ISO compatibility for predictable tool life — order the insert directly via Metav Werkzeuge or contact our consultants for fitment advice. DPMT 11T302 AH6225 turning insert by Tungaloy — PVD-coated carbide, rhombic form, 11° relief DPMT11T302 AH6225 is a compact, ISO-standard indexable turning insert for general-purpose external and internal turning, suited to medium-duty operations and varying material conditions PVD-coated carbide for durable cutting edges Universal grade optimised for stainless steels ISO-compatibility for standard toolholders Rhombic shape with 11° relief for versatile turning Durable, sharp cutting edge for stainless steels The combination of PVD-coated carbide and the AH6225 grade provides a balance of a sharp cutting edge and robust edge stability under fluctuating cutting conditions. The coating reduces adhesion and heat at the cutting interface, which improves wear resistance and helps maintain a consistent profile over long runs. For machining austenitic or other stainless steels, the insert’s geometry and substrate reduce built-up edge tendencies, contributing to fewer interruptions and more predictable productivity. Predictable chip control and improved process stability A single-sided chipbreaker matched to the insert form ensures controlled chip formation during both external and internal turning. Stable chip formation reduces the risk of recutting and surface damage, which directly supports higher throughput and less rework. The insert’s moderate corner radius of 0.2 mm gives a compromise between edge strength and surface finish, enabling reliable component tolerances while extending effective tool life under variable feeds and depths of cut. ISO-standard dimensions that simplify tool selection Designed as an ISO-indexable plate, compatibility with the holder depends on form, relief angle (11°), tolerance class, fixation style and thickness. The rhombic plate form and the 55° geometry offer flexibility across turning applications, while the plate thickness of 3.97 mm and the central hole with a cylindrical bore plus single-sided countersink (40°–60°) ensure secure clamping and repeatability in assemblies. Choosing an ISO-standard insert reduces setup time and inventory complexity for mixed-machine environments. Application guidance for reliable results This insert performs best in medium machining scenarios where a combination of edge fidelity and stable cutting action is required. Select the cutting parameters conservatively at first and increase feed or speed as the process proves stable; monitor for signs of built-up edge on stainless batches. The insert is suitable for both external and internal turning when paired with the appropriate holder and clamping set. For applications where consistent surface quality and long tool life are priorities, this indexable plate is a practical choice that balances performance and economy — the DPMT11T302 AH6225 name denotes its ISO form, grade and intended use. Contact Metav Werkzeuge for tailored advice on holder compatibility, sample availability and fast supply of Tungaloy DPMT11T302 AH6225 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951240 Manufacturer SKU: TUN6951240 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: AH6225, PVD-coated Facts Corner radius: 0.2 mm Plate thickness: 3.97 mm Plate size: 11 mm Relief angle: 11° Geometry angle: 55° Hole style: cylindrical hole + single-sided countersink (40°–60°) Features Rhombic plate form One-sided chipbreaker ISO-standard indexable insert for turning Universal grade for stainless steels Compatible with ISO toolholders and clamping sets FAQ What materials is this insert suitable for? The DPMT11T302 AH6225 insert is formulated as a universal grade for machining stainless steels, delivering a compromise of sharpness and edge strength for medium-duty turning. Which clamping and holder characteristics determine compatibility? Compatibility depends on the insert form, relief angle (11°), tolerance class, fixation type, plate size and thickness; ensure the holder accepts ISO rhombic plates with the specified central hole and countersink. How does the PVD coating affect performance? The PVD coating on the AH6225 substrate reduces adhesion and heat at the cutting zone, improving wear resistance and extending usable cutting life under variable conditions for turning operations. Is the insert suitable for internal turning as well as external turning? Yes, the rhombic form and chip control design make this insert suitable for both external and internal turning when paired with a compatible holder and correct setup. What cutting edge preparation is recommended for good surface finish? A 0.2 mm corner radius provides a balance between edge strength and surface finish; starting with modest feed rates and verifying stability on trial cuts helps optimise finish and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 11T302 AH6225 Wendeplatten - Tungaloy
Benefit from a PVD‑coated carbide grade designed for reliable machining of stainless steels, combined with ISO compatibility and a secure clamping interface for consistent productivity. Order the insert directly via Metav Werkzeuge or consult our team for application support. DPMT 11T302 AH6225 ISO turning insert by Tungaloy — PVD‑coated carbide, 55° geometry DPMT11T302 AH6225 is an ISO‑standard rhombic insert intended for external and internal turning, engineered to deliver a sharp yet stable cutting edge for medium machining of stainless steels ISO rhombic insert, 55° cutting geometry PVD‑coated carbide for enhanced wear resistance Universal grade for stainless steels AH6225 Centre hole with cylindrical seat and 40°–60° countersink Longer tool life and consistent edge performance The PVD‑coated carbide grade AH6225 combines a fine microstructure with a hard, wear‑resistant coating to prolong service intervals under varying conditions. This insert is optimised for machining stainless steels, where a balance between a sharp cutting edge and edge stability is required; the result is predictable tool life and reduced regrinding frequency. The coating reduces built‑up edge and improves thermal stability, which translates into more consistent component dimensions and lower overall cutting costs. Secure seating and ISO compatibility for reliable clamping Conforming to ISO norms, the insert’s form, clearance angle and tolerance class ensure straightforward selection and interchangeability with matching holders. The rhombic geometry and the 55° approach angle allow flexible use in a variety of turning set‑ups, while the centre hole with a cylindrical seat and a 40°–60° countersink gives positive seating and repeatable clamping accuracy. This mechanical certainty reduces vibration risks and supports steady cutting conditions, particularly when changing inserts during high‑mix production. Targeted performance in external and internal turning Equipped with a single‑sided chipbreaker and a universal chip control design, this insert suits both external profiling and internal turning tasks. When paired with an appropriate holder and cutting parameters, the insert supports good surface finish and controlled chip formation on medium‑duty turning operations. Selecting the matching chipbreaker and feed rate according to the workpiece material will improve process stability and machining throughput, making the setup economical for batches and machining trials. Practical system considerations for easy maintenance The cutting system comprises the ISO insert, a compatible external holder or boring bar, and the necessary clamping kit and replacement screws. Keeping a small stock of the same geometry and grade helps maintain machine uptime and simplifies tool management. When installing, ensure the seat area is clean and the clamping screw torqued to the holder manufacturer’s specification to preserve accurate repeatability; regular inspection of the cutting edge will indicate when indexation or replacement is required. For reliable turning of stainless components, contact Metav Werkzeuge for advice on using the Tungaloy AH6225 inserts and suitable holders — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951358 Manufacturer item number: 6951358 Manufacturer SKU: TUN6951358 Model series: ISO turning inserts Material: Carbide Facts Size: 11 Thickness: 3.97 mm Lead/approach angle: 55° Clearance angle: 11° Corner radius: 0.2 mm Special features Shape: Rhombic Grade: AH6225 (PVD‑coated carbide) Chipbreaker: single‑sided Mounting: with centre hole Hole style: cylindrical seat + one‑side countersink (40°–60°) Intended application: Turning (external and internal) FAQ What materials is this insert suited for? The AH6225 grade is a universal PVD‑coated carbide developed for machining stainless steels and performs well under medium cutting conditions. How does the insert fix to the holder? The insert uses a centre hole with a cylindrical seat and a one‑side countersink; the design ensures positive seating and repeatable clamping when used with the correct ISO holder. Can this insert be used for internal turning? Yes, the rhombic geometry and single‑sided chipbreaker make the insert suitable for both external and internal turning applications. What performance benefits does the AH6225 grade provide? AH6225 offers improved wear resistance and edge stability through its PVD coating, supporting longer tool life and stable cutting on stainless steels. What is the official designation and manufacturer SKU? The item is listed as DPMT11T302 AH6225 Tungaloy insert, manufacturer SKU TUN6951358. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DPMT 11T302 AH6225 Wendeplatten - Tungaloy
Combine the durability of a PVD-coated cemented carbide grade with a 0.2 mm corner radius and a 55° approach angle to achieve stable, repeatable turning of rostfreie Stähle; order the insert directly via Metav Werkzeuge or consult the technical team for tailored application advice. DPMT 11T302 AH6225 Turning Insert (Tungaloy) – 55° approach, 0.2 mm radius The DPMT11T302 AH6225 is a rhombic, ISO-compliant turning insert engineered for external and internal turning, offering a sharp yet robust cutting edge for medium-duty machining of rostfreie Stähle. PVD-coated cemented carbide grade AH6225 55° approach angle for versatile turning 0.2 mm corner radius for precise profiles Rhombic ISO insert with cylindrical hole Predictable cutting performance for mixed production The combination of a PVD-coated surface and a cemented carbide substrate provides consistent wear resistance and reliable edge behaviour under changing conditions. The AH6225 grade is formulated as a universal option for rostfreie Stähle, balancing a sharp cutting edge with sufficient toughness to withstand interrupted cuts and variable feeds. PVD coating reduces adhesion and improves thermal resilience; in practical terms this means longer tool life and fewer insert changes, which supports steady cycle times and lower tooling-related downtime. Geometry that supports accuracy and process stability A rhombic, ISO-compliant geometry with a 55° approach angle and 0.2 mm corner radius delivers both access to tight profiles and control of cutting forces. The 3.97 mm thickness and the cylindrical hole with a single-side countersink (40°–60°) ensure positive clamping in standard holders; compatibility is determined by shape, clearance angle and tolerance class. For shops transitioning between external and internal turning, this geometry helps maintain surface finish and dimensional repeatability while reducing the need for multiple specialised tools. System integration and application advantages in the workshop Designed for use in a typical ISO insert system—insert, compatible external holder or boring bar, clamp set and replacement screws—the component simplifies logistics and inventory. The single-sided chipbreaker provides effective chip control for many turning operations, lowering the risk of entanglement and improving machine uptime. When fitted in a stable holder and paired with appropriate speeds and feeds, the insert supports efficient material removal with predictable tool life, contributing to a cost-effective production flow and higher first-pass yield. For demanding turning of rostfreie Stähle, consult Metav Werkzeuge on the Tungaloy AH6225 inserts for application-specific recommendations and availability — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 6951305 SKU: 6951305-Tungaloy Manufacturer SKU: TUN6951305 Name: DPMT11T302 AH6225 Tungaloy insert Numbers / Core technical data Insert size: 11 mm Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 11° Approach angle: 55° Manufacturer article number: 6951305 Designs / Special features Material: cemented carbide Coating: PVD Grade: AH6225 (universal for rostfreie Stähle) Shape: rhombic Hole: with cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) ISO designation: DPMT11T302 FAQ What materials is this insert intended for? The DPMT11T302 AH6225 insert is specified for machining rostfreie Stähle and is formulated to balance edge sharpness and toughness for medium turning tasks. How does the AH6225 grade affect performance? AH6225 is a PVD-coated cemented carbide grade; on the DPMT11T302 it offers improved wear resistance and reduced adhesion, leading to longer, more consistent tool life in varied production conditions. Which holder types are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and insert size; the rhombic DPMT geometry fits standard ISO external holders and boring bars designed for 11 mm inserts. What advantages does the 0.2 mm corner radius provide? A 0.2 mm corner radius on the DPMT11T302 enables precise profile turning with reduced risk of breakage on light interruptions, while maintaining a good surface finish on typical turning passes. Is the clamping arrangement standardised? Yes; the insert features a cylindrical hole with a single-side countersink (40°–60°) for secure, standardised clamping in compatible ISO systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 11T302 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH8015 grade, a rhombic 55° geometry and precise 0.2 mm corner radius for efficient, repeatable turning of heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application support. DPMT11T302 AH8015 rhombic turning insert, 55° lead angle – Tungaloy The DPMT11T302 AH8015 is an ISO-form turning insert designed for external and internal turning, offering a balance of wear resistance and edge stability for the machining of heat‑resistant alloys. PVD-coated carbide AH8015 grade ISO rhombic insert, 55° lead angle 0.2 mm corner radius for fine finishes Cylindrical hole with 40°–60° countersink Higher productivity on heat-resistant alloys The combination of a PVD-coated surface and the AH8015 carbide composition provides a balanced performance between wear resistance and edge stability. This makes the insert particularly suited to continuous production runs where consistent tool life reduces interruptions. The coating improves thermal resistance and helps maintain cutting edge integrity under elevated temperatures, leading to fewer indexings and more parts per tool life. For manufacturers working with tougher alloys, this means measurable gains in throughput and predictable process windows. Precise geometry for consistent dimensional control The rhombic plate form with a 55° lead angle and a 0.2 mm corner radius delivers a predictable contact geometry that supports stable cutting forces and good surface quality. The insert’s 11° clearance angle and ISO conformity simplify grade selection and holder matching; compatibility depends on form, clearance, tolerance class, fastening, size and thickness rather than brand alone. Explaining briefly: the clearance (or free) angle prevents rubbing at the flank, so the correct value helps protect the edge and maintain part tolerances during facing and profiling operations. Reliable chip control and straightforward system integration Equipped with a single-sided chipbreaker, the plate promotes controllable chip formation in both external and internal turning. The system approach—insert, matched outer holder or boring bar, shim/clamping set and replacement screws—ensures secure mounting and repeatable clamping pressures. The plate thickness of 3.97 mm combined with the through-hole plus a one-sided countersink (40°–60°) enables secure seating and easy indexing while maintaining rigidity for medium-depth cuts. Using a standard ISO insert reduces setup complexity and aids quick tooling swaps on production lines. Economical operation through durability and versatility Selecting the AH8015 grade reduces the trade-off between flank wear and chipping resistance, offering a cost‑effective solution for varied shop-floor conditions. The insert’s adaptability across a broad range of heat‑resistant alloys reduces the need for multiple specialised grades, simplifying inventory and lowering tooling overhead. Combined with predictable tool life and straightforward holder compatibility, the component supports continuous, productive machining and consistent part quality over long production cycles. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy DPMT11T302 AH8015 insert into existing tooling systems and to arrange supply or technical consultation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951241 Manufacturer SKU: TUN6951241 Manufacturer article number: 6951241 Material: Hartmetall Series: ISO-Drehwendeschneidplatten Facts Insert designation: DPMT11T302 Grade: AH8015 Corner radius: 0.2 mm Lead/angle: 55° Clearance (free) angle: 11° Thickness: 3.97 mm Plate size: 11 Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features PVD-coated carbide Single-sided chipbreaker ISO rhombic plate form Suitable for external and internal turning System components: insert, holder/boring bar, shim/clamping set, replacement screws Recommended use: machining of heat-resistant alloys FAQ What materials is the DPMT11T302 AH8015 best suited for? The DPMT11T302 AH8015 insert is optimised for heat‑resistant alloys; the AH8015 grade balances wear resistance and cutting-edge stability for these materials. How does the insert mount to standard holders? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; the DPMT11T302 is ISO‑conforming for straightforward mounting in compatible Tungaloy or third‑party holders. What benefits does the PVD coating provide? The PVD‑coated surface on the AH8015 grade enhances thermal resistance and reduces adhesive wear, improving tool life and maintaining cutting performance on demanding workpieces. Is the corner radius suitable for fine finishing? With a 0.2 mm corner radius, the plate supports finer surface finishes while still providing sufficient edge strength for many production turning tasks. Does the insert include a chipbreaker and what is its effect? Yes, the plate has a single‑sided chipbreaker that promotes controlled chip formation, aiding process security and surface quality during both external and internal turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DPMT 11T302 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced combination of a PVD-coated AH8015 carbide grade and precise ISO DPMT 11T302 geometry for robust machining of heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DPMT11T302 AH8015 indexable turning insert (ISO DPMT 11T302) by Tungaloy — for general turning of heat‑resistant alloys DPMT11T302 AH8015 is an ISO‑standard indexable turning insert designed for external and internal turning where a balance of wear resistance and cutting edge stability is required. ISO DPMT 11T302 form, rhombic 55° geometry PVD-coated AH8015 carbide for heat-resistant alloys 0.2 mm corner radius, one-sided chipbreaker Cylindrical hole with 40°–60° single-side countersink Consistent cutting performance thanks to the AH8015 grade The AH8015 PVD‑coated carbide combines wear resistance with edge strength to deliver predictable life in the machining of heat‑resistant alloys. The thin but durable coating reduces adhesive wear at elevated temperatures and helps maintain a sharp cutting edge for longer periods, which translates into fewer insert changes and steadier surface finish. For general turning operations, this balance reduces downtime and supports higher process reliability in medium‑to‑high‑duty cycles. Geometry that ensures stability and reliable chip control The rhombic ISO DPMT 11T302 form with a 55° included angle and an 11° clearance provides a sturdy cutting face and good access for profiling and plunge cuts. With a 0.2 mm corner radius and a single‑sided chipbreaker, the insert is configured for controlled chip formation on interrupted cuts and variable depths of cut. The central cylindrical hole with a 40°–60° single‑side countersink enables secure clamping and repeatable positioning in compatible holders, giving consistent cutting geometry and reduced vibration during turning. System integration and practical application guidance This insert is intended to be used as part of a system comprising a matching external holder or boring bar, a backing/support shim or clamp set, and the specified fixing screw. Selection of the correct chipbreaker and grade is recommended according to workpiece material and machining stability; for example, the coated AH8015 grade is the preferred option for heat‑resistant alloys and mixed‑material batches. When paired with a robust holder and correct cutting parameters, the arrangement delivers improved tool life and consistent surface integrity in both external and internal turning. For reliable machining of heat‑resistant alloys with Tungaloy cutting technology, contact Metav Werkzeuge to request detailed application support or to place an order — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 6951359 Manufacturer SKU: TUN6951359 SKU: 6951359-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Application: Turning Facts Plate size: 11 mm Plate thickness: 3.97 mm Clearance angle: 11° Included angle: 55° Corner radius: 0.2 mm Special features ISO designation: DPMT11T302 Rhombic plate form Grade/coating: AH8015, PVD-coated One-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) Compatible with ISO-compliant holders and boring bars FAQ Is this insert suitable for heat‑resistant alloys? The DPMT11T302 AH8015 insert from Tungaloy is specifically designed as a first choice for the general machining of heat‑resistant alloys, offering a balance of wear resistance and edge stability. What clamping arrangement is required for this insert? The insert features a cylindrical hole with a single‑side countersink (40°–60°) and is intended to be clamped in compatible ISO holders or boring bars; use the matching clamp set and screw for repeatable positioning of the DPMT11T302 AH8015 insert. Which types of turning operations are recommended? Designed for both external and internal turning, the insert performs well in steady and interrupted cuts when combined with appropriate holder rigidity; the DPMT11T302 AH8015 grade is optimised for general turning tasks on heat‑resistant materials. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius provides a compromise between edge strength and fine detail capability, helping the DPMT11T302 AH8015 insert resist edge chipping while still allowing accurate profiling and consistent surface finish. Can the insert be used for light finishing passes? Yes; with its PVD coating and balanced edge stability, the DPMT11T302 AH8015 insert can be employed for finishing when cutting parameters and holder stability are set to suit the desired surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 11T302 AH8015 Wendeplatten - Tungaloy
Benefit from PVD-coated carbide and a 55° rhombic geometry with a 0.2 mm corner radius for consistent performance when turning heat‑resistant alloys; compatibility is ensured by matching form, clearance angle and size. Order directly via Metav Werkzeuge or consult our specialists for process-specific recommendations. DPMT11T302 AH8015 Tungaloy turning insert — PVD-coated carbide, 55° rhombic The DPMT11T302 AH8015 is an ISO rhombic turning insert designed for external and internal turning of heat‑resistant alloys and general turning operations. PVD-coated carbide grade AH8015 55° rhombic geometry for versatile turning 0.2 mm corner radius for controlled edge strength One-sided chipbreaker for predictable chip formation High‑efficiency machining for demanding alloys The insert delivers a precise combination of PVD-coated carbide and a balanced microstructure, optimised for machining heat‑resistant alloys. The AH8015 grade provides a compromise between wear resistance and cutting edge stability, reducing unplanned tool changes and improving throughput. The rhombic geometry with a 55° included angle gives good access in external and internal operations, while the 0.2 mm corner radius helps maintain edge strength on interrupted cuts. This technical design translates into fewer machine stops and a more predictable life cycle for the tool. Simple integration and reliable clamping Integration into existing toolholders is straightforward when form, 11° clearance angle, tolerance, fastening and thickness are matched. The insert’s ISO designation DPMT11T302 and the defined size make compatibility checks quick during tool planning. The 3.97 mm thickness contributes to rigidity in the clamping interface, and the cylindrical hole with a single‑sided countersink (40°–60°) ensures secure fastening in standard ISO holders. Choosing the correct chipbreaker and grade to suit workpiece material and stability leads to consistent surface finish and reduced secondary operations. Long‑term performance and recommended use For general turning of heat‑resistant alloys this cutting grade is a practical first choice: it combines stable chip formation with a cutting edge that withstands moderate thermal loads. The one‑sided chipbreaker promotes predictable chip control in many turning conditions, decreasing machine downtime from tangled swarf. As part of an ISO‑based system, the insert supports fast insert changes and repeatable setups, which benefits batch production and mixed‑series work. For process optimisation, pair the insert with a suitable external holder, backup shims and correct fastening torque to exploit its full potential. For tailored advice or to secure DPMT11T302 AH8015 Tungaloy inserts, contact Metav Werkzeuge for application support and prompt supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951306 SKU: 6951306-Tungaloy Manufacturer SKU: TUN6951306 Manufacturer: Tungaloy Model series: ISO turning inserts Facts Size: 11 mm Thickness: 3.97 mm Clearance angle: 11° Included angle: 55° Corner radius: 0.2 mm Special features Shape: rhombic Coating: PVD Grade: AH8015 Chipbreaker: one-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning; recommended for heat‑resistant alloys FAQ What materials is this insert intended for? The DPMT11T302 AH8015 insert is primarily intended for the general machining of heat‑resistant alloys, offering a balance between wear resistance and edge stability. How is compatibility with a toolholder determined? Compatibility depends on the insert’s form, 11° clearance angle, tolerance class, fastening type, size and thickness; matching these parameters ensures correct seating and secure clamping. What geometry and measurements define the insert? This rhombic insert features a 55° included angle, a 0.2 mm corner radius, size 11 mm and 3.97 mm thickness, details that guide holder selection and cutting data. How does the chipbreaker affect machining? The one‑sided chipbreaker gives predictable chip formation in many turning conditions, improving surface finish and reducing the risk of chip issues that interrupt production. Is the grade suitable for interrupted cuts and mixed batches? Yes; the AH8015 grade has been designed for a compromise between edge strength and wear resistance, making it suitable for varied turning tasks including interrupted cuts when used with appropriate parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DPMT 11T302 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp cermet finishing grade and ISO‑standard geometry for consistent, high‑quality surface results; the low cutting forces and 0.2 mm corner radius support continuous finishing cuts. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. DPMT11T302 11T302 NS9530 Tungaloy indexable insert — finishing for turning DPMT11T302 is an ISO‑standard rhombic turning insert designed for finishing operations in steel, featuring an 11° relief and a 0.2 mm corner radius. ISO rhombic insert DPMT11T302, finishing grade NS9530 cermet for high surface finish 11° relief and 0.2 mm corner radius Cylindrical hole with one‑side countersink Precision finishing for steel turning with minimal cutting forces The DPMT11T302 insert is supplied in the uncoated NS9530 cermet grade, engineered specifically as a finishing choice for machining steel. The chemical and micro‑structural characteristics of the cermet produce a sharp cutting edge and inherently low cutting forces, which together reduce workpiece distortion and deliver a high surface finish on continuous cuts and small depths of cut. For workshop planners and turning shops aiming to reduce downstream grinding or polishing, the clear benefit is fewer secondary operations and more parts meeting tolerance on first pass. Consistent geometry and ISO compatibility for predictable results Built to ISO dimensions, the insert’s rhombic form and 55° geometry ensure repeatable engagement angles in standard holders. The 11° relief and 0.2 mm corner radius create a defined cutting line that assists in producing even finishes across batches. Standardisation of form, relief, tolerance class, fastening, size and thickness simplifies holder selection and inventory management, enabling a predictable process window and faster set‑up times for turning centres and turret lathes. Practical mounting and system guidance for secure clamping The insert includes a cylindrical hole with a one‑side countersink (40°–60°) to match common clamping concepts. Compatibility with a given holder is determined by the insert’s form, free angle, tolerance class, fastening and thickness — the ISO turning insert system allows selection of matching clamping sets, underlay plates and replacement screws to ensure stable fixation. Specifying the matching outer holder and clamping kit reduces vibration and supports the intended finishing application. Application advice and economic impact for production As a finishing grade, the insert is best paired with a single‑sided chipbreaker and cutting parameters aimed at continuous chip formation and modest material removal per pass. This approach preserves the sharp edge of the cermet and concentrates the process on surface integrity rather than heavy metal removal. The operational advantage is a consistent part finish and reduced rework, contributing to lower unit processing time and better first‑time quality in serial production. Contact Metav Werkzeuge for availability and tailored machining recommendations on Tungaloy finishing inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951310 SKU: 6951310-Tungaloy Manufacturer SKU: TUN6951310 Model series: ISO-Drehwendeschneidplatten Insert designation: DPMT11T302 Item label: DPMT11T302 NS9530 Tungaloy-Wendeplatte Facts Corner radius: 0.2 mm Thickness: 3.97 mm Size: 11 Relief angle: 11° Geometry angle: 55° Special features Material: Hartmetall Grade: NS9530 (uncoated cermet) Chipbreaker: single‑sided Hole: cylindrical hole + one‑side countersink (40°–60°) Shape: rhombic Application: Turning (finishing for steel) System: ISO turning insert; compatibility determined by form, relief, tolerance, fastening, size and thickness FAQ Is this insert suitable for finishing steel components? Yes. The DPMT11T302 in NS9530 cermet is formulated for finishing steel, providing a sharp edge, low cutting forces and a high surface finish for continuous cuts and small depths of cut. Can the insert be used in standard ISO holders? Compatibility is achieved via the ISO form and dimensions; the insert’s form, relief angle, tolerance class, fastening, size and thickness determine the correct holder and clamping set for secure mounting of the DPMT11T302 insert. Which chipbreaker should be selected for this grade? A single‑sided chipbreaker is supplied for this type; it is recommended to match the chipbreaker and cutting data to the NS9530 finishing grade to maintain edge sharpness and surface quality. Does the insert require a coated substrate for durability? This article is an uncoated cermet grade (NS9530), optimised for finishing tasks where a sharp cutting edge and surface integrity are priorities rather than an additional coating for extreme abrasion resistance. What information is needed to order the correct matching holder? Provide the insert designation DPMT11T302, the relief angle (11°), thickness (3.97 mm) and the form (rhombic). These details let Metav Werkzeuge identify compatible external holders and clamping kits. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 11T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the proven combination of ISO‑standard compatibility, a sharp uncoated cermet cutting edge, and a compact rhombic 55° geometry to achieve consistent finishing results in steel turning; order directly from Metav Werkzeuge or consult their technical team for application-specific advice. DPMT 11T302 NS9530 — ISO turning insert by Tungaloy The DPMT 11T302 NS9530 is an ISO‑standard rhombic turning insert for finishing steel, engineered for continuous cuts and fine surface quality in external and internal turning operations. ISO‑standard rhombic insert Uncoated cermet grade NS9530 Sharp cutting edge for fine finishes One‑sided chipbreaker for continuous cuts Consistent finishing performance for steel turning The insert offers uncoated cermet NS9530, a finishing grade developed for steel that combines a sharp cutting edge with reduced cutting forces to produce a high surface finish on continuous cuts and small depths of cut. As an indexable turning insert, it is optimised for applications where surface integrity and dimensional consistency are priorities. The cermet composition provides good wear resistance and a stable cutting edge under steady feed conditions, helping to reduce rework and downstream machining time. ISO compatibility and secure clamping for reliable use Designed as an ISO‑standard plate, compatibility with the toolholder is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The insert features a rhombic 55° geometry, relief angle 11°, corner radius 0.2 mm and a thickness of 3.97 mm, with a cylindrical hole plus single‑side countersink (40°–60°) for positive clamping. These dimensional and fixing details ensure repeatable seating in matched holders, clamping sets and replacement screws, which supports toolroom efficiency and predictable process set‑up. Practical guidance to increase productivity and process reliability For productive finishing, match the one‑sided chipbreaker and the NS9530 grade to workpiece material, machining type and setup rigidity. The insert is particularly suited to continuous cutting scenarios with small cuts of depth and moderate feeds, where the sharp cermet edge reduces cutting forces and improves surface finish. Selection of a suitably rigid holder and correct clamping torque will prolong cutting edge life and maintain consistent results. For complex jobs or uncertain material conditions, technical consultation is recommended to select the optimal chipbreaker and milling parameters. Contact Metav Werkzeuge for tailored recommendations on the DPMT 11T302 NS9530 turning insert or to request detailed technical data at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6951243 SKU: 6951243-Tungaloy Manufacturer SKU: TUN6951243 Model series: ISO‑Drehwendeschneidplatten Label: DPMT11T302 NS9530 Tungaloy‑Wendeplatte Facts Size: 11 Thickness: 3.97 mm Relief angle: 11° Corner radius: 0.2 mm Geometry: rhombic, 55° Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Material: cemented carbide Special features Grade: NS9530 Uncoated cermet One‑sided chipbreaker For finishing steel; continuous cuts and small depths ISO‑standard insert for matched holders and clamping sets FAQ Which materials is this insert suited for? The DPMT 11T302 NS9530 insert is specified as a finishing grade for steel and performs best in continuous turning operations where a fine surface finish is required. Is the cutting material coated or uncoated? This indexable insert uses an uncoated cermet grade (NS9530), chosen for its sharp cutting edge and surface finish characteristics. How is compatibility with toolholders ensured? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; the ISO‑standard DPMT geometry and the specified hole style ensure secure clamping in matching holders. What cutting conditions suit this insert best? The plate is optimised for continuous cuts with small depths of cut and moderate feeds, where the sharp edge minimises cutting forces and improves surface quality. Does the insert include a chipbreaker? The product features a one‑sided chipbreaker; selection of the appropriate chipbreaker and grade should be matched to workpiece material and machining stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 11T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, ISO compatibility and a low cutting-force geometry for reliable cycle-to-cycle results. Order the DPMT11T302 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask the consultants for application advice. DPMT11T302 NS9530 Tungaloy insert — ISO turning insert for finishing, rhombic 11 mm, 55° A DPMT11T302 NS9530 indexable insert engineered for finishing operations in turning, designed as a rhombic ISO plate with a 55° principal cutting angle and a sharp edge for low cutting forces. Precision finishing grade NS9530 Rhombic ISO insert, 11 mm size Sharp cutting edge for low cutting forces Suitable for continuous cuts and small depths High-quality finishing for turning operations The uncoated cermet grade NS9530 is tailored for finishing passes on Stahl, delivering a sharp cutting edge that reduces cutting forces and improves surface quality. As a finishing grade, the material combination and edge preparation promote consistent chip flow during continuous cuts and small depths of cut, making the insert especially suited to stable turning processes. The controlled edge geometry helps achieve repeatable part finish and reduces the need for secondary polishing. Designed for smooth system integration and reliable clamping Compatibility with ISO holders is ensured by the insert’s geometry: rhombic form, clearance angle of 11°, tolerance class, fastening style and thickness. The plate includes a central hole with a cylindrical bore and a one‑sided countersink (40°–60°), enabling secure seating in a wide range of external holders and boring bars. Use with the appropriate shim or clamp set and the specified replacement screws for consistent clamping pressure and minimal runout, which supports stable tool life and predictable process results. Cost-effective finishing and recommended applications With a corner radius of 0.2 mm and a thickness of 3.97 mm, the insert balances edge strength and fine surface generation for external and internal turning. The single‑sided chipbreaker geometry assists in maintaining short, controllable chips on finishing cuts. Where part accuracy and surface integrity are priorities, this grade reduces rework and supports efficient production cycles while fitting into standard ISO indexable systems for straightforward tool inventory management. For precision finishing in Stahl turning, request the DPMT11T302 NS9530 Tungaloy insert through Metav Werkzeuge or consult the specialists at info@metav-werkzeuge.com / +49 2822 7131930 to confirm suitability for the intended holder and application Technical data Article number: 6951360 SKU: 6951360-Tungaloy Manufacturer SKU: TUN6951360 Designation: DPMT11T302 Model series: ISO turning indexable inserts Grade: NS9530 Substrate: carbide Cutting material: uncoated cermet Application: turning Facts Size: 11 mm Thickness: 3.97 mm Clearance angle: 11° Corner radius: 0.2 mm Principal cutting edge angle: 55° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Rhombic insert shape Single-sided chipbreaker Sharp edge for low cutting forces Optimised for continuous cuts and small depths ISO‑standard plate compatible with external holders and boring bars System composition: insert, holder/boring bar, shim/clamp set and replacement screws FAQ What material is this insert best suited for? The DPMT11T302 NS9530 is a finishing grade developed for turning Stahl, offering a sharp cermet edge that favours high surface quality on steel components. Can the insert be used for internal turning? Yes. The rhombic form and the 55° cutting angle of the insert make it suitable for both external and internal turning where finishing and small depths of cut are required. What does the NS9530 designation mean for performance? NS9530 identifies the uncoated cermet finishing grade that provides low cutting forces, a sharp edge and consistent surface finish, specifically chosen for fine finishing on Stahl. How should the insert be clamped in the toolholder? Use a compatible ISO external holder or boring bar with the correct shim or clamp set and replacement screws; the central hole with cylindrical bore and countersink ensures secure seating and repeatable clamping. What edge radius is available and how does it affect the finish? The insert has a corner radius of 0.2 mm, which supports fine surface generation and tight dimensional tolerance during finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com