DNMG 150616 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade that balances toughness and wear resistance for medium to heavy-duty steel turning; the result is consistent throughput and reduced tool changes. Order the insert via Metav Werkzeuge or consult the technical team for optimisation of tooling systems. DNMG 150616 T9225 turning insert for turning by Tungaloy — 55° rhombic, 1.6 mm radius The DNMG150616 T9225 is an ISO rhombic turning insert engineered for medium to heavy steel machining, offering a double-sided chipbreaker and a cylindrical locating hole for secure clamping. DNMG150616, ISO rhombic insert, 55° angle CVD-coated carbide T9225 for steel Double-sided chipbreaker, cylindrical hole Corner radius 1.6 mm, 6.35 mm thickness Improve machining consistency and reduce downtime with a robust universal grade The CVD-coated T9225 grade supplies a balance of toughness and wear resistance that is particularly suited to interrupted cuts and variable engagement conditions typical in production turning of steel. The cemented carbide substrate stabilises the cutting edge under heavier cutting forces, which translates into fewer insert changes and longer productive runs. For manufacturing operations prioritising stable batch machining and predictable tool life, this combination supports improved overall productivity and process reliability. Simple integration into ISO tool systems to speed up setup Compatibility with toolholders is governed by insert geometry, relief angle, tolerance class, fastening method, size and thickness. The rhombic DNMG form with a 55° cutting angle and a cylindrical locating hole ensures secure seating in standard external holders and boring bars. With a plate thickness of 6.35 mm and size 15, the insert mounts directly into common clamping systems; the recommended system build comprises the ISO insert, a matching external holder or boring bar, a shim/clamping set and spare screws, enabling straightforward replacement and minimised setup time on the shopfloor. Controlled chip formation and surface quality for external and internal turning The double-sided chipbreaker is designed to manage chips and to maintain consistent cutting forces across a range of feed rates, supporting stable cutting when performing both external and internal turning operations. Selecting the correct chipbreaker and the T9225 grade according to component stability and material condition helps to achieve reliable chip evacuation and a repeatable surface finish, while also decreasing the risk of edge chipping in less stable setups. Practical handling and inventory advantages for production environments A double-sided geometry multiplies effective edge life per index, which reduces inventory turnover and shortens tool change routines. The standardised ISO form factor simplifies stocking and allows cross-usage across multiple machines and holders, improving logistic efficiency. For process engineers assessing tool replacement intervals, the combination of CVD-coated surface and a tough substrate offers measurable gains in edge life under medium to heavy cutting conditions. Contact Metav Werkzeuge to review how the Tungaloy DNMG150616 T9225 insert can be integrated into existing turning cells; technical consultation and order assistance are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6796083 SKU: 6796083-Tungaloy Manufacturer SKU: TUN6796083 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Angle: 55° Corner radius: 1.6 mm Thickness: 6.35 mm Size: 15 Design and features Insert form: rhombic (DNMG) Coating/grade: T9225 (CVD-coated) Chipbreaker: double-sided Hole: with cylindrical hole Application: external and internal turning System build: insert, holder or boring bar, shim/clamping set, spare screws FAQ What materials is this insert intended for? The DNMG150616 T9225 is formulated primarily for steel machining; the T9225 grade offers robustness for medium to heavy steel turning operations. Can the insert be used for interrupted cuts or unstable engagement? Yes. The T9225 grade is designed to deliver additional toughness for varying engagement conditions and for light interruptions during turning. How does the chipbreaker affect performance? The double-sided chipbreaker on this insert improves chip control and maintains consistent cutting forces, aiding surface finish and reducing the risk of edge damage in many turning applications. Is the insert compatible with standard ISO holders? The insert follows ISO form and dimensions; compatibility depends on holder geometry, relief angle and clamping system, but the DNMG150616 is intended for standard ISO-compatible holders and boring bars. What are the ordering references for this item? Reference the article number 6796083 or SKU 6796083-Tungaloy when ordering or requesting technical data sheets for this turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade engineered for tough steel applications, a 55° rhombic geometry for reliable engagement, and a 1.6 mm corner radius for robust edge life — available directly via Metav Werkzeuge or through consultation with our advisors. DNMG150616 T9235 turning insert — DNMG series, Tungaloy The DNMG150616 T9235 is a CVD-coated carbide turning insert designed for external and internal turning where interrupted cuts and less-stable setups demand a tough grade and predictable performance. CVD-coated carbide grade T9235 55° rhombic geometry 1.6 mm corner radius Double-sided chipbreaker design Maximise productivity in unstable cutting conditions The combination of a CVD coating and a tough carbide grade (T9235) delivers improved resistance to edge chipping during interrupted cuts and unstable setups. This specification is aimed at turning operations where reduced cutting speeds are preferable to protect the tool edge; the result is longer in-process life and fewer unexpected tool changes. Process planners will value the insert’s capacity to maintain dimensional consistency under fluctuating conditions, which supports higher overall machine uptime and repeatable part quality. Stable engagement and secure clamping for repeatable accuracy The 55° rhombic geometry and 6.35 mm plate thickness offer mechanical stability during both external and internal turning, while the central cylindrical hole enables reliable clamping in standard ISO-compatible holders. Compatibility with a holder is determined by form, relief angle, tolerance class, fixing method, size and thickness; adherence to these ISO parameters ensures secure seating and consistent cutting orientation. Clear specification of geometry and mounting details simplifies tool selection and reduces setup time on the shop floor. Optimised edge form for steel machining and fewer process interruptions A 1.6 mm corner radius combined with a double-sided chipbreaker supports robust chip control and a balanced cutting edge that copes well with the mechanical shocks of interrupted machining. The grade’s toughness makes it suitable for steel applications at lower cutting speeds, where the priority is avoiding premature edge wear or fracture rather than maximising surface speed. For production environments with mixed batch sizes or unstable fixtures, this insert provides a pragmatic balance between durability and versatility. Practical fit into ISO-based tool systems As part of an ISO insert system, the plate integrates into an assembly consisting of a compatible external holder or boring bar, a support pad or clamp set and replacement screws. The ISO designation and standardised dimensions simplify inventory management and facilitate interchangeability across machines that accept DNMG geometry. Specification-driven selection — matching the chipbreaker and grade to the workpiece material and machining conditions — yields measurable gains in cycle stability and cost-efficiency. For technical selection and immediate supply of Tungaloy DNMG150616 T9235 inserts, contact Metav Werkzeuge for tailored advice and rapid delivery at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785836 Manufacturer SKU: TUN6785836 SKU: 6785836-Tungaloy Model series: ISO-turning inserts Facts Corner radius: 1.6 mm Plate thickness: 6.35 mm Insert size: 15 mm Main angle: 55° Relief (facing) angle: 0° Hole: with cylindrical hole Special features Material: carbide Coating: CVD Grade: T9235 (tough grade for steel) Chipbreaker: double-sided Geometry: rhombic Application: external and internal turning Compatibility: ISO form, relief angle, tolerance class, fixing, size, thickness FAQ Is this insert suitable for interrupted turning in steel? The DNMG150616 T9235 insert from Tungaloy is designed as a tough, CVD-coated carbide grade specifically for steel machining in interrupted and unstable cutting conditions. What holder characteristics are required for correct fitment? Correct fitment requires a holder matching the ISO DNMG form with compatible relief angle, tolerance class, fixing method, size and plate thickness as specified for the insert. How many usable cutting edges does the plate offer? With a double-sided design and rhombic geometry, the insert provides reversible cutting edges; the exact number of successive edges depends on the chosen index strategy and machining parameters. Which machining tasks benefit most from this grade and chipbreaker? Operations involving intermittent cuts, roughing of steel with variable stability, and setups where edge robustness outweighs maximum cutting speed will gain the most from the T9235 grade and its double-sided chipbreaker. Can this insert be used for internal turning as well as external turning? Yes, the geometry and standard ISO dimensions make the insert suitable for both external and internal turning when paired with the appropriate holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMG 150616 T9235 Wendeplatten - Tungaloy
Combining the T9235 CVD-coated carbide with a robust 1.6 mm corner radius and a 55° rhombic form, this insert delivers dependable chip control and resistance to interrupted cuts — ideal for unstable turning conditions. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. DNMG 150616 T9235 — ISO indexable turning insert (rhombic, 55°) by Tungaloy The DNMG150616 T9235 is an ISO-format indexable turning insert designed for external and internal turning, engineered to withstand interrupted cuts and unstable machining conditions. CVD-coated carbide grade T9235 55° rhombic geometry for versatile turning 1.6 mm corner radius for enhanced strength Double-sided chipbreaker, cylindrical hole Reliable cutting under interrupted and unstable conditions The CVD-coated T9235 grade combines a tough carbide substrate with a protective coating to resist chipping during interrupted cuts and in less stable setups. This composition is particularly suited to machining steel at lower cutting speeds where mechanical shocks and vibrations occur. The result is improved edge stability and fewer unplanned tool changes, which supports continuous production and reduces scrap rates. Clear guidance on compatibility and mounting As part of the ISO indexable system, compatibility with a toolholder is governed by the insert’s form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic shape with a 55° included angle and a 0° clearance demands a matching holder profile; the insert’s cylindrical hole and standard thickness of 6.35 mm facilitate secure clamping and straightforward replacement. Correct pairing lowers setup time and preserves cutting performance. Efficient chip control and secure seating for predictable machining The double-sided chipbreaker geometry is optimised for reliable chip formation and evacuation during turning operations, helping to avoid chip entanglement and protect the cutting edge. The rhombic shape offers two effective cutting edges per side, increasing usable life before indexing. Secure seating via the cylindrical hole provides consistent positioning, contributing to repeatable results and predictable tool behaviour. Workshop advantages: durability, less downtime, consistent results With a 1.6 mm corner radius and the tough CVD-coated carbide construction, the insert offers a balance between cutting edge strength and versatility for finishing to medium-heavy turning tasks. The design supports longer tool life in interrupted cuts and unstable feeds, reducing the frequency of insert changes and maintenance. For production environments requiring steady throughput, this combination enhances overall process reliability and cost-efficiency. Contact Metav Werkzeuge for application advice and to arrange supply of the Tungaloy DNMG150616 T9235 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and immediate assistance Technical data Manufacturer article number: 6785859 SKU: 6785859-Tungaloy Manufacturer SKU: TUN6785859 Model series: ISO indexable turning inserts Material: carbide Core technical data Corner radius: 1.6 mm Plate size: 15 mm Plate thickness: 6.35 mm Included angle: 55° Clearance angle: 0° Hole: with hole Hole style: cylindrical Special features Grade: T9235 (CVD-coated) Double-sided chipbreaker Rhombic plate form Suitable for external and internal turning Optimised for steel at lower cutting speeds and interrupted cuts ISO-format insert — compatibility determined by form, angle, tolerance and fastening FAQ What materials is this insert best suited for? The DNMG150616 T9235 insert is formulated for machining steel; the CVD-coated grade T9235 provides toughness for lower cutting speeds and interrupted cuts. Is the insert compatible with standard ISO holders? Compatibility depends on the holder’s form, clearance angle, tolerance class and fastening; the DNMG150616 follows ISO dimensions and requires a matching 55° rhombic holder. How does the chipbreaker affect performance? The double-sided chipbreaker on this insert controls chip formation and evacuation, improving surface quality and protecting the cutting edge during unstable conditions. How many usable edges are available per insert? The rhombic, double-sided design provides multiple indexable edges; the exact count depends on how the insert is indexed and the chosen cutting parameters. Does the insert require a special clamping screw or backing plate? The DNMG150616 insert is mounted via a cylindrical hole and standard ISO clamping systems; the specific screw and backing plate must match the holder design and tolerance class. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMM 150402 DX120 Wendeplatten - Tungaloy
Take advantage of the PCD DX120 grade and ISO‑standard DNMM form to achieve higher cutting speeds and markedly extended tool life for aluminium and non‑ferrous workpieces; order directly via Metav Werkzeuge or contact our consultants for application support. DNMM 150402 DX120 Tungaloy turning insert for high‑speed aluminium machining The DNMM150402-DIA DX120 Tungaloy insert is an ISO‑standard rhombic turning insert designed for high‑speed external and internal turning of aluminium and other non‑ferrous, abrasive materials. PCD grade DX120 for aluminium and non‑ferrous ISO‑standard rhombic DNMM form 0.2 mm nose radius, 4.76 mm thickness Cylindrical hole for secure mounting Maximise throughput with PCD performance The DNMM150402‑DIA combines a PCD (polycrystalline diamond) cutting layer with a robust substrate to deliver very long tool life and the capacity for high cutting speeds when machining aluminium and other non‑ferrous materials. PCD is a hard, wear‑resistant cutting material that maintains a sharp edge under abrasive conditions; this results in fewer indexings and longer production runs. The direct benefit is improved productivity and reduced tooling downtime per component, which supports lean manufacturing targets. Secure fit and consistent repeatability Designed as an ISO indexable insert, the rhombic geometry and cylindrical hole ensure stable clamping in compatible DNMM holders. Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; these parameters allow the insert to be used reliably in standard external and internal turning setups. The 0° clearance angle and 55° cutting edge geometry give a predictable contact zone, while the 0.2 mm nose radius supports accurate contouring and consistent surface finish without compromising edge strength. Material suitability and cost effectiveness The DX120 PCD grade is optimised for aluminium, non‑ferrous metals and abrasive non‑metallic materials, enabling higher feed and speed settings than conventional cemented‑carbide inserts. This leads to a favourable cost‑per‑part ratio on long runs and abrasive workpieces. As PCD is not intended for machining steels or heat‑treatable materials, selecting the correct grade and chipbreaker is essential for process reliability. For many aluminium applications the result is lower tool consumption, improved surface quality and consistent part tolerances. For application advice on Tungaloy DX120 PCD inserts or to check holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct consulting and rapid supply. Technical data Article number: 6822161 Manufacturer SKU: TUN6822161 SKU: 6822161-Tungaloy Model series: ISO turning indexable inserts Label: DNMM150402-DIA DX120 Tungaloy insert Core data ISO code: 150402 Insert size: 15 mm Thickness: 4.76 mm Nose radius: 0.2 mm Clearance angle: 0° Cutting edge angle: 55° Special features Substrate material: Hartmetall (carbide substrate) Cutting material: PCD (polycrystalline diamond), grade DX120 Chipbreaker: DIA Hole: with hole Hole style: cylindrical hole Insert shape: rhombic Application: turning Compatibility notes: fit depends on form, clearance, tolerance, clamping, size, thickness FAQ What materials is this insert suited for? The DNMM150402‑DIA DX120 Tungaloy insert is optimised for aluminium, other non‑ferrous metals and abrasive non‑metallic materials. Does the DX120 grade allow higher cutting speeds? Yes, the DX120 PCD grade provides high cutting‑speed capability and extended tool life compared with conventional carbide in suitable applications. How is the insert fixed in the holder? The insert features a cylindrical hole for secure mounting; correct clamping and compatible holder geometry ensure repeatable positioning. Is this insert suitable for steel machining? The DX120 PCD grade is not recommended for machining steels or hardenable materials; it is specifically intended for non‑ferrous and abrasive non‑metallic workpieces. What dimensions and geometry should be checked for compatibility? Check the ISO code (150402), insert size (15 mm), thickness (4.76 mm), nose radius (0.2 mm), clearance angle (0°) and rhombic form to ensure compatibility with the chosen DNMM holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMM 150404 DX120 Wendeplatten - Tungaloy
High-speed aluminium and non-ferrous machining benefits from the combination of a polycrystalline diamond (PCD) cutting material and the DX120 grade for extended tool life. The rhombic 55° geometry and ISO compatibility provide reproducible surface quality and secure clamping; order directly via Metav Werkzeuge or consult the team for precise insert selection. DNMM 150404 DX120 — Turning insert (PCD, 55°) by Tungaloy The DNMM150404-DIA DX120 is an ISO‑standard rhombic turning insert designed for high‑speed machining of aluminium, non‑ferrous alloys and abrasive non‑metals. Polycrystalline diamond (PCD) grade DX120 Rhombic 55° geometry for finishing Cylindrical hole for secure clamping Very long tool life at high cutting speeds Maximise productivity in aluminium turning The use of polycrystalline diamond (PCD) in the DX120 grade enables substantially higher cutting speeds compared with conventional carbide inserts, permitting faster cycle times and fewer tool changes. For machining aluminium and other non‑ferrous materials, this results in a measurable reduction in machining time while maintaining dimensional stability. The economically oriented benefit is clear: extended operating intervals lead to lower tooling cost per component without compromising process throughput. Achieve consistent surface finish and edge stability A rhombic 55° geometry combined with the DIA chipbreaker is optimised for producing smooth finishes on sensitive materials; the geometry promotes controlled chip flow and reduces smearing. The 0° relief angle supports low cutting forces in light finishing passes, which helps maintain edge stability and reproducible part quality. This balance between cutting geometry and chip control reduces rework and improves first‑pass yield. Clear compatibility and straightforward clamping Compatibility follows ISO norms: the designation 150404 defines the insert form, while plate size and thickness guide holder selection. The insert features a cylindrical hole and a plate thickness of 4.76 mm, with a plate size of 15 mm and a corner radius of 0.4 mm, enabling secure and repeatable clamping in standard ISO turning holders. The ISO conformity simplifies tool procurement and reduces setup uncertainty in mixed‑machine environments. Process guidance for reliable operation and economy A cemented carbide substrate with a PCD cutting layer is engineered for wear resistance and long life when machining abrasive non‑metals and alloys. Selecting the appropriate chipbreaker and grade according to workpiece material and machine stability ensures predictable performance and reduced downtime. The result is a process that is both productive and repeatable, supporting stable batch production and efficient single‑piece flows. Contact Metav Werkzeuge today at info@metav-werkzeuge.com or +49 2822 7131930 to discuss Tungaloy DX120 PCD turning solutions and ensure the optimal insert choice for the application. Technical data Article number: 6822162 Manufacturer SKU: TUN6822162 SKU: 6822162-Tungaloy Model series: ISO turning indexable inserts Designation: DNMM150404-DIA Grade: DX120 Chipbreaker: DIA Cutting material: polycrystalline diamond (PCD) Substrate: cemented carbide Hole style: cylindrical hole Core data Plate size: 15 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Cutting angle: 55° ISO code: 150404 Relief angle: 0° Special features Rhombic plate form ISO‑standard indexable insert With cylindrical fastening hole Suitable for external and internal turning Intended for aluminium, non‑ferrous metals and abrasive non‑metals High cutting speeds and long tool life Compatible with standard ISO turning holders FAQ Which materials are best for this insert? The DNMM150404-DIA DX120 insert is optimised for aluminium, other non‑ferrous metals and abrasive non‑metals thanks to its polycrystalline diamond cutting layer and tailored chipbreaker. How is holder compatibility ensured? Compatibility is determined by the ISO form and dimensions; the DNMM profile, 15 mm size, 4.76 mm thickness and the cylindrical hole ensure secure mounting in ISO‑compliant turning holders. What are the benefits of the DX120 grade? The DX120 grade combines a PCD cutting layer with high wear resistance for long tool life, enabling higher cutting speeds and fewer tool changes under suitable machining conditions. Can this insert be used for internal turning operations? Yes, the insert is suitable for both external and internal turning when mounted in the appropriate ISO turning holder and under stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMM 150608 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust cutting performance, versatile ISO compatibility and stable edge life for reliable medium to heavy steel turning; order the DNMM150608-57 T9225 indexable insert via Metav Werkzeuge or request application advice from our consultants. DNMM150608-57 T9225 ISO turning insert — rhombic, CVD-coated carbide by Tungaloy A DNMM150608-57 T9225 rhombic indexable insert engineered for turning applications, designed to deliver toughness and stability in medium to heavy steel machining. Rhombic ISO insert, DNMM150608-57 CVD-coated carbide grade T9225 6.35 mm plate thickness for stability Optimised for medium to heavy steel turning Consistent performance in variable cutting conditions The DNMM150608-57 T9225 indexable insert is built on a CVD-coated carbide substrate and the T9225 grade to combine wear resistance with elevated toughness. This composition is intended for medium to heavy steel machining where interrupted cuts or fluctuating engagement demand reliable edge stability. Compatibility with toolholders follows ISO conventions: form, relief angle, tolerance class, clamping style, size and thickness determine fit, so the insert integrates into complete systems comprising the insert, suitable external holder or boring bar, backing/clamp set and replacement screws. The result is a predictable cutting cycle and fewer unscheduled tool changes, supporting continuous production. Measurable geometry that supports process reliability Key dimensions translate directly into operational benefits: a 15 mm edge length with a 0.8 mm corner radius provides a compromise between edge strength and surface finish, while a 6.35 mm plate thickness increases rigidity under heavy radial loads. The insert’s 0° relief angle and a 55° cutting geometry (lead angle) influence chip flow and cutting forces; these parameters suit stable roughing and finishing passes when matched with the correct chipbreaker. The insert features a cylindrical hole for positive clamping; ensure the holder accommodates the hole style and the ISO designation to achieve repeatable seating and torque distribution. Such precise geometry reduces vibration and improves component tolerances. Practical selection and application advice for shop-floor efficiency In everyday workshop use, selecting the correct chipbreaker and grade is as important as the insert geometry. The chipbreaker 57 paired with the T9225 grade is intended to handle a wide range of steels under moderate to heavy depths of cut, offering good chip control and predictable wear progression. For external and internal turning operations, this insert reduces downtime by extending intervals between indexings and replacements. Production engineers and contract manufacturers achieve faster setup times when the insert is specified alongside compatible holders and clamping sets, minimising trial-and-error and increasing first-pass yields. System-oriented approach for reduced downtime The insert is intended to be used as part of a complete tooling system; effective deployment requires matching the insert to an appropriate external holder or boring bar and ensuring correct clamp components are available. The ISO-based system approach simplifies procurement and replacement: ISO designation and standardised dimensions allow rapid identification of spare inserts and holders. Where material mix or machining stability varies, choosing this robust universal grade helps maintain throughput and lowers the total cost of ownership by reducing the frequency of tool changeovers and process interventions. Contact Metav Werkzeuge for tailored machining recommendations and to source the DNMM150608-57 T9225 Tungaloy insert with professional application support Technical Data Article number: 6780954 Manufacturer SKU: TUN6780954 SKU: 6780954-Tungaloy Manufacturer: Tungaloy Model series: ISO turning inserts Core specifications Plate size: 15 mm Plate thickness: 6.35 mm Corner radius: 0.8 mm Relief angle: 0° Lead angle: 55° Hole: with hole, cylindrical Special features Grade: T9225 Coating: CVD-coated carbide Chipbreaker: 57 Plate form: rhombic Typical application: external and internal turning System components: insert, external holder/boring bar, backing/clamp set, spare screws FAQ What materials is this insert suitable for? The DNMM150608-57 T9225 insert is specified primarily for medium to heavy steel machining and performs where interrupted cuts or varying engagement demand enhanced toughness. How does the T9225 grade benefit production? Tungaloy’s T9225 grade combines a CVD-coated carbide substrate with toughness for stable edge life, reducing indexings and helping to maintain consistent part quality under fluctuating cutting conditions. Which chipbreaker should be chosen for finishing and roughing? The supplied chipbreaker 57 is a versatile option for a mix of roughing and finishing in steel; selection can be optimised further based on exact workpiece material and machining strategy. Is the insert compatible with ISO toolholders? Yes, the insert follows ISO conventions; compatibility depends on matching form, relief angle, tolerance class, clamping and size, so the appropriate ISO holder or boring bar must be selected. What are the key dimensions to check when replacing inserts? Check the plate size (15 mm), thickness (6.35 mm), corner radius (0.8 mm) and the hole style (cylindrical) to ensure correct seating and clamping in the holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DNMM 150612 T9225 Wendeplatten - Tungaloy
Benefit from the CVD-coated carbide T9225 and the ISO-standard DNMM geometry for stable cutting in medium to heavy steel turning; the 1.2 mm nose radius and 55° approach angle combine durability with predictable chip formation. Order the insert directly via Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation. DNMM150612-57 T9225 ISO turning insert for turning — CVD-coated carbide, 1.2 mm radius (Tungaloy) DNMM150612-57 T9225 is an ISO-standard turning insert engineered for medium to heavy steel turning, delivering robust edge life and consistent chip control in interrupted or variable cutting conditions CVD-coated carbide grade T9225 Suitable for medium to heavy steel turning ISO rhombic insert with 55° cutting angle 1.2 mm nose radius, cylindrical hole Stable cutting performance for demanding steel work The CVD-coated carbide composition and the T9225 grade provide a balance of toughness and wear resistance that suits interrupted cuts and fluctuating engagement. The combination of a 1.2 mm nose radius and a 55° insert geometry helps maintain a predictable contact area, reducing vibration and improving surface finish during external and internal turning. By favouring a universal grade, the insert supports a broad range of steel types while prioritising process stability and longer tool life. Compatibility and secure clamping for faster setup Manufactured to ISO dimensions, the rhombic DNMM geometry and the cylindrical hole simplify selection and clamping in compatible holders. Compatibility is determined by the insert form, relief angle, tolerance class, fixing method, size and thickness; the standardised shape reduces search time for suitable toolholders and spare parts. The 6.35 mm plate thickness and clear dimensional standards enable straightforward replacement and consistent positioning, which shortens machine downtime and supports repeatable set-ups. Clear benefits for productivity and process reliability Choosing a universal, robust grade such as T9225 helps improve overall throughput by extending tool life and stabilising chip formation under heavy or variant cutting loads. The insert’s design, including the 55° cutting angle and CVD coating, supports reliable surface quality with fewer tool changes. For production environments where predictable results and reduced process variability matter, this geometry-grade combination reduces rework and contributes to predictable machining cycles. Contact Metav Werkzeuge for a compatibility check and to order the DNMM150612-57 T9225 insert directly from stock — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance Technical data Article number: 6780723 SKU: 6780723-Tungaloy Manufacturer SKU: TUN6780723 Designation: DNMM150612-57 Manufacturer: Tungaloy Facts Nose radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 15 mm Cutting angle: 55° Relief angle: 0° Hole: with cylindrical hole Special features CVD-coated carbide Grade: T9225 (universal, robust) ISO rhombic insert (DNMM) For external and internal turning Suitable for medium to heavy steel turning Compatible with standard ISO toolholders FAQ What materials is this insert suitable for? The DNMM150612-57 T9225 insert is intended primarily for steel machining, serving medium to heavy turning operations where toughness and wear resistance are required. How does the T9225 grade differ from other grades? The T9225 grade combines CVD coating with a resilient carbide substrate to offer broad application range, improved chip control and enhanced resistance to fracture during interrupted cuts. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; the ISO rhombic DNMM format fits standard DNMM holders when those parameters match. What is the purpose of the cylindrical hole in the insert? The cylindrical hole enables secure clamping and repeatable positioning in clamping sets and seatings designed for ISO rhombic inserts, improving assembly speed and stability. Can this insert be used for finishing as well as roughing? Yes; with appropriate feed and speed adjustments the insert’s 1.2 mm nose radius and coating allow for good surface finish in finishing passes while still being robust enough for roughing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPCW 11T3ZF AH740 Wendeplatten - Tungaloy
High-feed performance and process security unite in a compact geometry: PVD-coated AH740 carbide for wear resistance, a rhombic 11 mm profile and a 55° cutting angle deliver productive material removal with small axial depths. Take advantage of the DoFeed family’s design for reliable pocketing and face milling — order via Metav Werkzeuge or consult our specialists for application advice. DPCW 11T3ZF AH740 DPCW milling insert — Tungaloy (DoFeed series) The DPCW 11T3ZF AH740 is a rhombic indexable insert engineered for high-feed milling, designed to maximise chip volume removal at low axial engagement for efficient pocketing and face operations. High-feed series for large chip volumes PVD-coated AH740 for wear resistance Rhombic 11 mm insert, 55° cutting angle Cylindrical hole with 40°–60° countersink Increased throughput with reliable cutting performance The DoFeed family is focused on maximising productive output when small axial depths are combined with high feed per tooth. The rhombic 11 mm geometry and 55° cutting angle enable a shallow axial engagement while maintaining a high chip load per revolution, which translates into shorter cycle times for pocketing and face milling. The AH740 grade, a PVD-coated carbide, combines wear resistance with a sharp cutting edge; this pairing reduces flank wear and supports consistent dimensional results in batch production. The design avoids unnecessary complexity: a simple, robust insert geometry designed for stable chip evacuation and repeatable performance across runs. Precision geometry that supports process security Geometry details matter in high-feed strategies. The 11° relief (free) angle and the 3.97 mm plate thickness contribute to a stable cutting edge and resistance to chipping under interrupted cuts. The insert’s cylindrical hole with a single-side countersink (40°–60°) secures accurate clamping and repeatable seating in compatible toolholders. When sharp edge integrity and process security are required together, the combination of the rhombic shape and PVD-coated AH740 substrate reduces the likelihood of unexpected edge failure, supporting uninterrupted production. Technical concepts such as chip formation and edge strength are deliberately balanced to support longer tool life and consistent productivity. Practical application advice and benefits for the workshop This insert is specified for milling tasks where high removal rates are needed without deep axial passes — ideal for high-feed roughing, pocketing and face operations. The DoFeed construction is optimised for large time-chip volumes, meaning fewer passes and lower machining time per component. Because the grade emphasises fracture and wear resistance, the insert is particularly suitable for operations that alternate between full and partial engagement. For users less familiar with high-feed kinematics: the strategy relies on increasing feed per tooth while keeping depth of cut small, which reduces spindle load and often raises metal removal rate per minute. For setup recommendations and cutting data, Metav Werkzeuge’s consultants can help select the appropriate holder and programme parameters to match material and machine capabilities. Choose the Tungaloy AH740 grade for process-secure high-feed milling and contact Metav Werkzeuge for stock verification, cutting data and application consulting at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6815316 Manufacturer SKU: TUN6815316 SKU: 6815316-Tungaloy Model series: DoFeed Label: DPCW11T3ZF AH740 Tungaloy-Insert Facts Insert size: 11 mm Plate thickness: 3.97 mm Cutting angle: 55° Relief (free) angle: 11° Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Grade: AH740 (PVD-coated carbide) Series application: high-feed milling, pocketing and face milling Insert shape: rhombic Chipbreaker: none FAQ What materials is this insert suitable for? The DPCW 11T3ZF AH740 insert is optimised for general milling tasks where durability and a sharp cutting edge are required; the AH740 grade is a wear- and fracture-resistant PVD-coated carbide suitable for a broad range of steel and alloy applications. Is the insert compatible with standard high-feed toolholders? Yes, the rhombic form and the cylindrical hole with countersink ensure secure clamping in conventional high-feed holders that accept DPCW-style inserts. How does the DoFeed family improve cycle times? By enabling high feed per tooth at small axial depths, the DoFeed approach increases metal removal per revolution while reducing the number of passes, leading to lower cycle times for pocketing and face milling. What should be considered when replacing an insert with SKU 6815316-Tungaloy? Check seating accuracy and clamping torque, ensure the holder matches the 11 mm geometry and 55° cutting angle, and verify cutting parameters to preserve the sharp edge and exploit the AH740 grade’s wear resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPCW 11T3ZF NS740 Wendeplatten - Tungaloy
Benefit from the combination of DoFeed high-feed geometry and the NS740 cermet grade for improved surface finish and consistent wear; the rhombic 55° form and carbide substrate provide secure cutting performance and dimensional stability. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. DPCW 11T3ZF NS740 — Tungaloy indexable insert for milling (DoFeed, 55°) DPCW 11T3ZF NS740 is a rhombic, high-feed indexable insert designed for productive milling operations such as pocketing and face milling in the DoFeed family High-feed DoFeed family design NS740 cermet for fine surface finish Rhombic 55° geometry for stable cutting Cylindrical hole with 40°–60° countersink Maximise material removal with high-feed DoFeed geometry The DoFeed design enables large time‑chip volumes at small axial depths, which translates into higher productivity for repetitive machining tasks. The insert’s rhombic 55° geometry and carbide substrate combine to maintain cutting edge stability even under elevated feed rates. This geometry reduces engagement per tooth while keeping consistent chip thickness, promoting faster cycle times without sacrificing dimensional control. The insert’s construction is optimised for integration into a complete milling system comprising the milling body, matching indexable inserts and fastening screws, ensuring straightforward replacement and predictable process behaviour. Achieve superior surface finish and steady wear with NS740 The NS740 grade is a cermet or coated cermet formulation selected for finishing to light machining of steel, emphasising surface quality and dimensional accuracy. Cermet grades offer a fine-grained edge that resists built-up edge and produces a smoother contact with the workpiece than some carbide grades. The result is improved part finish and more uniform flank wear, which reduces the need for intermediate dressing or rework. For operations where consistent tolerance and an elevated finish are priorities, this grade supports longer intervals between insert changes while preserving component quality. Secure clamping and versatile insert form for reliable fixing The insert features a rhombic plate form with a central cylindrical hole and a single‑sided countersink (40°–60°), enabling positive, repeatable clamping in compatible holders. The relief angle of 11° and a plate thickness of 3.97 mm contribute to a balanced edge strength suitable for the intended finishing and light machining tasks. The absence of a chipbreaker makes the geometry particularly suitable for producing fine surface finishes and predictable chip flow when combined with the correct milling body and clamping screws. Where high process security is required, the mechanical fixings and countersunk interface provide stable seating under typical milling loads. Recommended uses and process considerations for daily production Intended primarily for milling operations such as high‑feed milling, pocketing and face milling, the insert performs best in applications prioritising surface integrity and repeatable results. The system approach—milling body, matching inserts and screws—simplifies tool management and replacement cycles. Given the NS740 cutting grade and the insert geometry, adaptations in feed per tooth and cutting speed should aim to exploit the high‑feed advantage while maintaining light axial engagement; this yields efficient volume removal with controlled temperatures and wear. For unfamiliar setups, a brief trial cut on representative material is recommended to confirm the combination of feeds and speeds. For high‑feed milling with the NS740 cermet advantage, contact Metav Werkzeuge for supply and tailored application advice: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6727166 SKU: 6727166-Tungaloy Manufacturer SKU: TUN6727166 Model series: DoFeed Designation: DPCW11T3ZF NS740 Facts Plate thickness: 3.97 mm Relief angle: 11° Main angle: 55° Size: 11 Countersink angle range: 40°–60° Special features Substrate material: carbide Cutting material: cermet / coated cermet (NS740) Shape: rhombic With hole: cylindrical hole + single‑sided countersink (40°–60°) Without chipbreaker Application: milling Typical applications: high‑feed milling, pocketing, face milling System composition: milling body, matching indexable inserts and screws FAQ Which materials is this insert suitable for? The DPCW11T3ZF NS740 indexable insert (Tungaloy, SKU 6727166-Tungaloy) is designed primarily for finishing to light machining of steel, using the NS740 cermet grade to promote surface quality and consistent wear. How is the insert fixed in the milling body? The insert uses a central cylindrical hole with a single‑sided countersink (40°–60°) for secure clamping in compatible holders; the system comprises the milling body, matching indexable inserts and fastening screws. Does this insert include a chipbreaker? No, the DPCW11T3ZF is supplied without a chipbreaker, which supports fine finishing and predictable chip formation when combined with appropriate cutting parameters. What are the key geometric specifications? Key geometrical data: relief angle 11°, main angle 55°, plate thickness 3.97 mm and size 11; the hole style is cylindrical with a one‑side countersink. What cutting grade and substrate are used? The insert is graded NS740, a cermet or coated cermet designed for surface finish and uniform wear; the substrate material is carbide. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DPMT 070202 AH6225 Wendeplatten - Tungaloy
Combine a sharp, yet stable cutting edge with a universal PVD-coated grade to achieve consistent stainless steel turning under varying conditions. Order the DPMT070202 AH6225 insert via Metav Werkzeuge or consult our specialists for application guidance and optimisation. DPMT070202 AH6225 DPMT turning insert for turning – Tungaloy The DPMT070202 AH6225 is an ISO-standard rhombic indexable insert with a 55° included angle, designed for reliable external and internal turning, especially on stainless steels. PVD-coated carbide grade AH6225 Optimised for stainless steel machining Rhombic 55° geometry, 0.2 mm corner radius Cylindrical hole with single-sided countersink Consistent cutting performance for stainless steels The combination of a PVD-coated surface and the AH6225 carbide delivers a sharp yet stable cutting edge, balancing wear resistance and edge acuity for medium-duty machining. This composition improves chip control and helps maintain a predictable tool life when working with stainless steels, where built-up edge and work hardening are common concerns. Selecting this grade reduces rework and stabilises process output, which supports higher uptime and fewer unplanned tool changes. Secure, ISO-compatible fit for dependable clamping As an ISO-standard insert, compatibility with holders depends on form, clearance, tolerance class, fastening method, size and thickness; this insert is supplied in the widely used 07 size with a 55° rhombic form and a 0.2 mm corner radius, offering a versatile cutting geometry. The cylindrical hole with one-sided countersink (40°–60°) ensures positive seating and repeatable clamping in matching toolholders. A plate thickness of 2.38 mm and an 11° relief angle contribute to rigidity and support under moderate cutting forces, reducing vibration and improving surface finish in both external and internal turning operations. Application guidance to increase productivity and reduce risk This indexable insert is intended for external and internal turning in variable conditions; the single-sided chipbreaker supports predictable chip formation when paired with a suitable holder and cutting parameters. For best results, match the chipbreaker and grade to the workpiece material and machine rigidity: the AH6225 grade is a universal choice for stainless steels and performs well where conditions change between interrupted cuts and continuous cuts. Using this insert can lead to more consistent component quality and reduced cycle time when integrated into a process that considers feed, depth of cut and workholding stability. Contact Metav Werkzeuge for tailored application advice, sample availability or to discuss batch requirements — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951339 Manufacturer SKU: TUN6951339 Seller SKU: 6951339-Tungaloy Material: carbide Model series: ISO turning indexable inserts Designation: DPMT070202 AH6225 Core data Corner radius: 0.2 mm Relief angle: 11° Included angle: 55° Plate thickness: 2.38 mm Size: 07 Special features Coating: PVD-coated Grade: AH6225 Shape: rhombic Mounting: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Intended use: turning (external and internal) Typical system: ISO insert, matching external holder or boring bar, shim/ clamp set and replacement screws FAQ What materials is this insert optimised for? The DPMT070202 AH6225 insert is optimised for stainless steels; the AH6225 PVD-coated grade is formulated to manage work hardening and deliver consistent results on a range of rostfreie Stähle. Which geometrical features influence holder compatibility? Compatibility depends on the insert form, clearance (relief) angle, tolerance class, fastening method, size and thickness; the 55° rhombic form, 2.38 mm thickness and cylindrical hole with countersink on this insert determine the matching holder specifications. Can this insert be used for both external and internal turning? Yes, the indexable design and geometry make the insert suitable for both external and internal turning when paired with an appropriate holder and cutting parameters. How does the AH6225 grade improve machining stability? The AH6225 grade combines a PVD coating with a substrate optimised for a sharp but stable cutting edge, improving chip formation and extending usable edge life under medium machining conditions. What mounting details should be checked before first use? Ensure the toolholder accepts a 07-size rhombic insert, secures the insert via the cylindrical hole/countersink arrangement, and that clamping parts (shim/clamp and screw) match the ISO mounting standard for repeatable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070202 AH6225 Wendeplatten - Tungaloy
Take advantage of a combination of durable PVD-coated carbide and a precise rhombic 55° geometry to maintain consistent process stability and good surface finish in stainless-steel turning operations; order directly via Metav Werkzeuge or ask the consultants for application advice. DPMT 070202 AH6225 indexable turning insert — Tungaloy (PVD-coated carbide, 55°) DPMT070202 AH6225 is an ISO-compliant indexable insert designed for reliable external and internal turning, optimised for stainless-steel machining. DPMT 070202 geometry, rhombic 55° angle PVD-coated carbide AH6225 for stainless steel 0.2 mm corner radius for fine finishes Cylindrical hole with single-sided countersink Consistent cutting performance for stainless steels The AH6225 grade is a PVD-coated carbide designed as a universal solution for rostfreie Stähle under varying machining conditions. Its combination of a sharp yet stable cutting edge and wear-resistant coating supports sustained cutting performance during medium-depth cuts. The insert’s material and coating reduce built-up edge and improve tool life, which leads to fewer tool changes and increased uptime. For customers seeking predictability in mixed-batch production, this grade provides a balanced compromise between durability and cutting-edge sharpness. Geometry and clamping that support precision turning The rhombic 55° geometry with a 0.2 mm corner radius yields a controlled cutting force and good surface quality on external and internal profiles. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to ensure secure seating and repeatable clamping in ISO holders; compatibility depends on holder form, clearance angle, tolerance class, fastening and insert thickness. The plate thickness of 2.38 mm and the ISO designation 070202 simplify selection for standard turning toolholders, while the single-sided chipbreaker aids chip control in stable setups. Practical advantages for process reliability and surface finish Using an insert with these characteristics improves process stability and helps achieve consistent part quality. The PVD coating enhances edge protection at elevated temperatures, while the single-sided chipbreaker directs chips away from the cutting zone, reducing recutting and potential surface damage. For short-run production or setups with variable stability, selecting the appropriate chipbreaker and adjusting feed rates in line with the insert’s geometry will quickly deliver measurable improvements in cycle time and finished-part appearance. For less experienced teams, the ISO coding and clear geometry data make integration into existing tooling systems straightforward. For application-specific recommendations, availability and ordering of the Tungaloy DPMT070202 AH6225 insert, contact Metav Werkzeuge for expert advice and fast delivery: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 6951265 Manufacturer SKU: TUN6951265 Model series: ISO turning indexable inserts Material: carbide Manufacturer: Tungaloy Core technical data Insert designation: DPMT070202 ISO code: 070202 Cutting edge radius: 0.2 mm Included angle: 55° Clearance angle: 11° Plate thickness: 2.38 mm Size: 07 Special features Grade/coating: AH6225, PVD-coated carbide Chipbreaker: single-sided Hole style: cylindrical hole with one-sided countersink (40°–60°) Geometry: rhombic Typical application: external and internal turning Compatibility: ISO holder form, fastening and tolerance dependent FAQ What materials is this insert suitable for? The DPMT070202 AH6225 indexable insert (Tungaloy, SKU 6951265) is formulated primarily for stainless steels and performs well where a stable, sharp cutting edge is required under varying conditions. Which turning operations are appropriate for this insert? The insert is intended for both external and internal turning; the rhombic 55° geometry and single-sided chipbreaker suit medium-depth cuts and profile work. How is the insert clamped and what should be checked for compatibility? Clamping uses the cylindrical hole with a one-sided countersink; compatibility is determined by holder form, clearance angle, tolerance class, fastening, size and thickness—ensure the holder matches the ISO 070202 specification. What surface finish can be expected when using this insert? With a 0.2 mm corner radius and the AH6225 grade, the insert delivers a fine surface finish when used with appropriate feeds and stable setup, aided by the PVD coating’s thermal resistance. Is the AH6225 grade suitable for interrupted cuts or unstable setups? AH6225 offers a balanced edge stability, but for highly interrupted cuts or unstable setups it is recommended to evaluate chipbreaker selection and cutting parameters to ensure tool life and part quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070202 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH6225 grade and the precise 0.2 mm corner radius to achieve stable cutting edges and predictable tool life in medium turning operations; order directly via Metav Werkzeuge or consult our specialists for application support. DPMT070202 AH6225 — ISO rhombic turning insert for Turning, Tungaloy The DPMT070202 AH6225 is an ISO-standard rhombic indexable insert engineered for medium turning of rostfreier Stahl, offering a balanced combination of edge sharpness and durability. PVD-coated carbide AH6225 for rostfreier Stahl ISO rhombic 07 shape with 55° cutting angle 0.2 mm corner radius for precise finishing Compatible with standard ISO turning holders Stable cutting performance for consistent results The PVD-coated AH6225 carbide grade provides a controlled balance between hardness and toughness, which translates into a stable cutting edge during medium turning operations. The coating enhances wear resistance and helps maintain geometry under variable conditions, so the insert delivers reliable tool life on rostfreier Stahl. By choosing a grade optimised for stainless applications, process variability is reduced and repeatability is improved, producing a more consistent surface finish and fewer interruptions for insert changes. Dimensional accuracy and holder compatibility Designed as an ISO rhombic 07 insert with a 55° cutting angle and an 11° relief angle, the geometry ensures a predictable cutting direction and straightforward clamping in common turning holders. The 0.2 mm corner radius supports accurate contouring without compromising edge strength, making the insert suitable for medium finishing passes. The central hole (cylindrical with a one-sided countersink 40°–60°) assures secure fastening and easy replacement, simplifying toolset management on the shop floor. Productivity advantages in everyday workshop use The single-sided chipbreaker and the PVD-coated carbide construction enable controlled chip formation and good surface integrity under typical machining conditions. As an ISO-standard indexable insert, it fits into established tool systems, minimising setup time and spare-part complexity. The combination of grade, geometry and coating promotes efficient metal removal at moderate cutting parameters while helping to extend the intervals between indexings, which supports higher uptime and lower process costs. For tailored advice on using the AH6225 grade in specific rostfreier Stahl applications, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and availability. Technical data Article number: 6947703 SKU: 6947703-Tungaloy Manufacturer SKU: TUN6947703 Material: Carbide (hardmetal) Coating: PVD Grade: AH6225 Facts Thickness: 2.38 mm Corner radius: 0.2 mm Cutting angle: 55° Relief angle: 11° Size: 07 Special features Rhombic 07 shape (DPMT) Cylindrical hole with one-sided countersink 40°–60° One-sided chipbreaker ISO-standard indexable insert for turning PVD-coated carbide suitable for rostfreier Stahl FAQ What machining tasks is this insert best suited for? The DPMT070202 AH6225 insert is optimised for medium turning operations, particularly when machining rostfreier Stahl where a balance of sharpness and edge stability is required. Which holders are compatible with this ISO insert? Compatibility depends on form, relief angle, tolerance class, fastening and size; the DPMT070202 format fits standard ISO rhombic turning holders designed for 07-size inserts. How does the AH6225 grade perform on rostfreier Stahl? The AH6225 grade, with its PVD coating, is formulated for rostfreier Stahl to provide stable chip formation and good wear resistance during medium cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070202 AH8015 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH8015 grade combined with a rhombic ISO geometry and a 0.2 mm corner radius for dependable turning of heat-resistant alloys; order directly via Metav Werkzeuge or consult the specialists for application-specific advice. DPMT070202 AH8015 Tungaloy — ISO rhombic turn insert for turning, 11° relief DPMT070202 AH8015 is an ISO-compatible rhombic turning insert designed for general external and internal turning of heat-resistant alloys, offering a balanced mix of wear resistance and cutting-edge stability. Rhombic ISO insert, 11° relief PVD-coated carbide AH8015 Single-sided chipbreaker design 0.2 mm corner radius, with mounting hole Consistent cutting performance for heat-resistant alloys The AH8015 grade is a PVD-coated carbide formulated as a first choice for the general machining of heat-resistant alloys. The coating improves resistance to adhesive and abrasive wear while the substrate maintains cutting-edge stability, yielding longer tool life under elevated temperatures. As an ISO turn insert, it is suitable for continuous production environments where process reliability and predictable tool wear are priorities. Selecting a grade that balances wear resistance with edge strength helps reduce downtime and maintain component tolerances. Secure mounting and ISO compatibility for production lines The rhombic geometry and the cylindrical hole with a one-sided countersink (40°–60°) enable secure clamping in a wide range of standard external holders and boring bars. Compatibility is determined by insert form, relief angle, tolerance class, fastening, size and thickness, so the insert integrates into typical production systems with appropriate holder selection. The 11° relief angle reduces rubbing during entry, while the 0.2 mm corner radius supports a stable cutting edge for semi-finish passes. System components typically include the ISO insert, a matching external holder or boring bar, a backing/clamping set and replacement screws for fast exchange. Practical guidance on chip control and application A single-sided chipbreaker offers reliable chip formation for many turning tasks; however, the chipbreaker and grade must be chosen according to workpiece material, machining type and machine stability. For medium-duty external turning and internal operations, this insert provides a compromise between surface finish and tool life. In the case of heavier cuts or interrupted cutting, a different chipbreaker or a more edge-stable grade may be preferable. The geometry supports both finishing and general machining when combined with the correct cutting conditions and holder rigidity. For precision turning with a robust cutting edge, contact Metav Werkzeuge for availability of the DPMT070202 AH8015 insert and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951340 Manufacturer SKU: TUN6951340 Vendor SKU: 6951340-Tungaloy Label: DPMT070202 AH8015 Tungaloy-Wendeplatte Manufacturer: Tungaloy Material: carbide Model series: ISO turning inserts Facts Corner radius: 0.2 mm Relief angle: 11° Included angle: 55° Plate thickness: 2.38 mm Plate size: 07 Special features Rhombic shape Cylindrical hole + one-sided countersink (40°–60°) PVD-coated grade AH8015 Single-sided chipbreaker Intended application: external and internal turning System components: ISO insert, external holder/boring bar, backing/clamp set, spare screws Compatibility depends on form, relief, tolerance class, fastening, size and thickness FAQ Which materials are best suited to this insert? The AH8015 grade of the DPMT070202 insert from Tungaloy is geared to the general machining of heat-resistant alloys, offering a compromise between wear resistance and edge stability for consistent tool life. How is the insert secured in the holder? Mounting uses the cylindrical hole with a one-sided countersink (40°–60°); secure clamping requires a compatible ISO holder or boring bar and the correct backing/clamping set plus screws. Is the geometry suitable for both external and internal turning? Yes; the rhombic shape and the specified relief angle support both external and internal turning operations when paired with suitable holders and machining parameters. When should an alternative chipbreaker or grade be considered? For heavy interrupted cuts or where maximal edge strength is required, a more robust chipbreaker or a different carbide grade may be preferable; the single-sided chipbreaker on this insert is best for many standard turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070202 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of dependable PVD-coated carbide and ISO‑compliant geometry for stable chip control and consistent surface finish; order the insert directly via Metav Werkzeuge or ask the consultants if needed. DPMT070202 AH8015 Tungaloy — ISO turning insert, rhombic 55° for turning DPMT070202 AH8015 is an ISO‑type indexable insert designed for precision external and internal turning, optimised for heat‑resistant alloys and general-purpose turning applications ISO‑compliant rhombic geometry 55° PVD‑coated carbide AH8015 for heat‑resistant alloys Single‑sided chipbreaker for predictable chips 0.2 mm nose radius and 11° clearance angle Durable cutting performance with PVD‑coated carbide The combination of a PVD coating and a wear‑resistant carbide substrate in AH8015 provides a robust balance between edge stability and abrasion resistance. This grade has been selected as a first choice for machining heat‑resistant alloys, offering longer tool life where elevated temperatures and abrasive conditions occur. For production contexts that demand repeatable tool life and reduced downtime, the coated substrate lowers flank wear and supports reliable material removal rates. The design therefore contributes to predictable process windows and improved overall machining efficiency. Geometry engineered for repeatable surface quality A rhombic 55° geometry with a 0.2 mm nose radius and an 11° clearance angle delivers a controlled cutting contact that benefits surface finish and dimensional accuracy. The relatively small nose radius helps to reduce cutting forces in finishing passes while the clearance angle prevents rubbing and localised heating. Because the insert follows ISO form factors, clamping and orientation in matching holders remain consistent, enabling repeatable set‑ups and simpler quality control across batches. The net effect is a stable tool‑workpiece interaction that supports consistent part quality. Predictable chip control and straightforward integration The insert features a single‑sided chipbreaker and a central hole with a cylindrical bore plus a one‑side countersink (40°–60°), ensuring secure fastening and defined chip formation. Its ISO designation and dimensional conformity facilitate rapid integration into existing tooling systems — an indexable insert, matching an appropriate external holder or boring bar, forms a complete cutting system with predictable behaviour. For workshop operators aiming for reliable cycle times and easy insert changes, the standardised geometry and chipbreaker reduce variability and simplify process documentation. For reliable machining performance with Tungaloy precision, contact Metav Werkzeuge for ordering or technical advice — Metav Werkzeuge can advise on holder compatibility and process optimisation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951266 SKU: 6951266-Tungaloy Manufacturer SKU: TUN6951266 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Numbers / Core technical data Geometry designation: DPMT070202 Plate size: 07 Plate thickness: 2.38 mm Clearance angle: 11° Cutting edge angle: 55° Nose radius: 0.2 mm Designs / Special features PVD‑coated carbide AH8015 Single‑sided chipbreaker Central hole: cylindrical bore + one‑side countersink (40°–60°) Rhombic plate form Application: turning (external and internal) ISO‑standard insert for matched holders FAQ What materials is this insert suitable for? This insert, graded AH8015 with a PVD coating, is intended primarily for heat‑resistant alloys and general turning applications where a balance of wear resistance and edge stability is required. How does the 55° rhombic geometry affect machining? The 55° rhombic geometry provides reduced cutting forces in finishing operations and versatile approach angles for both external and internal turning, contributing to consistent surface finishes. Is the insert compatible with my existing holder? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation DPMT070202 ensures fit with matching ISO‑format holders when those parameters are aligned. What does the chipbreaker do? The single‑sided chipbreaker controls chip shape and evacuation, lowering the risk of long, tangled chips and improving process stability during continuous turning. Can this insert be used for finishing and roughing? With its 0.2 mm nose radius and AH8015 grade, the insert is suitable for finishing and general‑purpose machining; selection of a specific chipbreaker and machining parameters will determine suitability for heavier roughing cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070202 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of robust edge stability, balanced wear resistance and ISO compatibility to keep turning processes predictable and productive; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DPMT070202 AH8015 ISO indexable turning insert for turning (55° rhombic) — Tungaloy The DPMT070202 AH8015 is an ISO rhombic indexable turning insert designed for general turning of heat‑resistant alloys, offering a PVD‑coated cemented carbide grade that balances wear resistance and cutting‑edge stability. PVD-coated carbide grade AH8015 ISO rhombic 55° geometry 0.2 mm corner radius for precision Single-sided chipbreaker, with centre hole Consistent performance on heat‑resistant alloys The PVD‑coated carbide grade AH8015 provides an optimised combination of wear resistance and cutting‑edge stability tailored to the machining of elevated‑temperature alloys. As a first‑choice grade for general purpose turning, the material behaviour reduces flank wear under variable cutting conditions, enabling longer tool life and fewer index changes. The PVD-coated surface improves thermal resistance and adhesion control, which supports stable metal removal rates and more predictable cycle times for batch and single‑part production. Precision geometry for repeatable, accurate turning The ISO rhombic form with an included angle of 55° and a 0.2 mm corner radius delivers controlled engagement and a defined cutting edge for finishing and light‑turning operations. A clearance angle of 11° and an insert thickness of 2.38 mm ensure reliable positioning and mechanical strength in the seat, while the central cylindrical hole with one‑side countersink (40°–60°) provides secure clamping. The single‑sided chipbreaker focuses chip formation for consistent evacuation and surface quality, translating into fewer interruptions and stable dimensional repeatability when turning both external and internal features. System compatibility and process reliability As an ISO‑standard indexable part, compatibility with holders is governed by shape, free clearance angle, tolerance class, fastening method, size and thickness. The insert integrates into standard tool systems comprising a matching holder, underlay/clamping set and replacement screws, simplifying tool‑change logistics on the shop floor. Specified as suitable for turning, the design supports a broad spectrum of workpiece materials where balanced performance is required, and the robust cutting edge contributes to reduced downtimes and predictable productivity in demanding machining sequences. Contact Metav Werkzeuge for tailored application support or order original Tungaloy DPMT070202 AH8015 inserts directly from Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility with existing holders and cutting parameters Technical Data Article number: 6762754 Manufacturer SKU: TUN6762754 Manufacturer: Tungaloy Material: Hartmetall Model series: ISO‑Drehwendeschneidplatten ISO designation: DPMT070202 Shape: rhombic Size: 07 Thickness: 2,38 mm Clearance angle: 11° Corner radius: 0.2 Hole: with hole Hole style: cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: one‑sided Application: Drehen Numbers / Core technical data Included angle: 55° Corner radius: 0.2 mm Thickness: 2.38 mm Size code: 07 Clearance angle: 11° Manufacturer article number: 6762754 Special features PVD‑coated cemented carbide grade AH8015 Designed for heat‑resistant alloys ISO‑standard indexable insert Rhombic geometry, 55° included angle Single‑sided chipbreaker Central cylindrical hole with countersink System concept: insert + holder + underlay/clamping set + screws FAQ What materials is this insert best suited to machine? The Tungaloy DPMT070202 AH8015 insert is optimised for machining heat‑resistant alloys, providing a balance of wear resistance and edge stability for general turning tasks. What is the insert geometry and how does it affect machining? The insert features a 55° rhombic geometry with a 0.2 mm corner radius, delivering controlled engagement for accurate finishing and precise turning operations. How is the insert secured in the toolholder? Clamping is achieved via the central cylindrical hole with a one‑side countersink (40°–60°); the design ensures secure seating when used with the correct ISO‑compatible holder and clamping set. Is the coating suited to high‑temperature cutting? Yes, the PVD‑coating on the AH8015 grade enhances thermal resistance and adhesion control, supporting stable performance in elevated‑temperature cutting conditions. Which components are required to assemble a ready‑to‑use tool system? A complete system comprises the ISO insert, a matching external holder or boring bar, the appropriate underlay/clamping set and replacement screws for secure fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070202 NS9530 Wendeplatten - Tungaloy
Product data inconsistent — the specification lists both carbide and uncoated cermet as the cutting material; please clarify the correct material to ensure accuracy in the documentation and avoid any potential confusion or errors during the manufacturing or procurement process, as it is essential to have precise information regarding the cutting material being used, especially when selecting tools or components for specific applications, since the performance, durability, and suitability of carbide and uncoated cermet can vary significantly depending on the intended use, operating conditions, and material being machined, so providing clear and accurate details will help streamline operations and maintain quality standards.
DPMT 070202 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of the NS9530 uncoated cermet finishing grade, a 0.2 mm corner radius and ISO compatibility for consistently high surface quality and stable production. Order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. DPMT070202 NS9530 Tungaloy turning insert — rhombic ISO finishing grade, 11° relief The DPMT070202 NS9530 Tungaloy is an ISO‑standard rhombic turning insert designed for precision finishing on steel and continuous cutting applications, offering a balanced mix of sharp cutting geometry and repeatable clamping. ISO rhombic insert DPMT070202, finishing grade Uncoated cermet NS9530 for fine surface finish 0.2 mm corner radius for small depth cuts With cylindrical hole and single-side countersink Consistent fine finishing with a cermet grade optimised for steel The main advantage of the NS9530 finishing grade is its combination of a sharp cutting edge and inherently low cutting resistance, which results in a superior surface finish and predictably low forces during machining. As an uncoated cermet, the grade excels in continuous turning and small depth cuts where a stable edge and reduced tendency to build up material are essential. The small 0.2 mm corner radius supports fine finishing passes and helps avoid excessive material removal, which in turn minimises rework and contributes to shorter downstream operations. This makes the insert particularly suitable when consistent dimensional quality and visual surface integrity are priorities. Secure clamping and ISO compatibility for repeatable setups The insert’s ISO conformance ensures compatibility with a wide range of holders when the form, relief angle, tolerance class, fastening and thickness are matched. The 11° relief and rhombic geometry produce predictable seating and stable cutting conditions, while the cylindrical hole with single‑side countersink (40°–60°) secures repeatable fastening and orientation in the pocket. A plate thickness of 2.38 mm contributes to reliable mechanical support under finishing loads. Together, these features reduce vibration and positional variance, so tool life and part-to-part consistency are improved across serial production. Practical chip control and process benefits for productive turning The single‑sided chipbreaker and the finishing geometry support controlled chip formation for many steels, enabling longer uninterrupted running and easier chip evacuation in typical lathe setups. By selecting a suitable chipbreaker and holder combination, machinists can exploit the insert’s low cutting forces to increase feed or reduce cycle times without compromising finish. The balance between edge sharpness and material robustness supports stable machining windows and fewer in‑process adjustments. Backed by Tungaloy’s manufacturing standards, the insert integrates into machining strategies that prioritise efficiency, reproducibility and surface quality. For reliable finishing performance choose the Tungaloy NS9530 insert and contact Metav Werkzeuge for tailored application advice or ordering information via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6951341 Manufacturer SKU: TUN6951341 SKU: 6951341-Tungaloy Facts Corner radius: 0.2 mm Relief angle: 11° Included angle: 55° Plate thickness: 2.38 mm Size designation: 07 Special features ISO rhombic indexable insert Uncoated cermet cutting material (NS9530) Finishing grade for steel, sharp cutting edge Single‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) Application: turning (external and internal finishing) FAQ What materials is this insert suitable for? The DPMT070202 NS9530 insert is formulated as a finishing grade for steel; the uncoated cermet composition is optimised for continuous turning and fine surface requirements on steel components. How does the small corner radius affect machining? A 0.2 mm corner radius enables small depth cuts and refined surface finishes while reducing the risk of excessive cutting forces, making the insert suitable for precision finishing passes. Which holder features are required for correct fitting? Compatibility depends on matching the insert form, tolerance class, fastening method, size and thickness; the cylindrical hole with single‑side countersink ensures correct seating and repeatable clamping in a suitable holder. Can this insert be used for both external and internal turning? Yes, the geometry and finishing grade are appropriate for both external and internal turning where fine surface quality and low cutting forces are required. What advantage does the uncoated NS9530 grade provide over coated grades? The uncoated NS9530 cermet grade offers a very sharp cutting edge and predictable behaviour in continuous cuts, delivering high surface quality in finishing operations without the variable thermal effects of some coatings. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070202 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing, low cutting forces and ISO compatibility for consistent shop-floor performance; order the DPMT070202 NS9530 turning insert directly via Metav Werkzeuge or ask the consultants for application advice. DPMT 070202 NS9530 Turning insert by Tungaloy — uncoated cermet, 11° clearance DPMT070202 NS9530 is a rhombic ISO turning insert optimised for finishing steel components with continuous cuts and small depths of cut ISO‑standard rhombic insert for turning Uncoated cermet grade NS9530 for finishing 11° clearance angle for low cutting forces Cylindrical hole with single‑side countersink Corner radius 0.2 mm for fine detail turning Reliable finishing for steel components with minimal cutting force The uncoated cermet grade NS9530 provides a very sharp cutting edge and low cutting forces, which directly improves surface quality during finishing operations. Designed specifically for continuous cuts and small depths of cut, this insert delivers an excellent surface finish while keeping forces low enough to reduce chatter on less rigid set‑ups. For applications where a refined finish and repeatable dimensional results are essential, the combination of cermet chemistry and a fine corner radius (0.2 mm) helps achieve consistent outcomes with fewer passes. Compatibility and geometry that simplify setup and clamping Built to the ISO‑standard series of indexable turning inserts, the geometry of this rhombic insert — a 55° orientation with 11° clearance and a thickness of 2.38 mm — ensures straightforward compatibility with widely used external and internal holders. The cylindrical hole with a single‑side countersink (40°–60°) provides secure locating and repeatable clamping, reducing set‑up time and improving process stability. Clear labelling of the ISO designation makes tool selection and inventory control simpler for production planners and buyers. Shop‑floor advantages that support productivity and part quality The single‑sided chipbreaker and the fine corner radius focus the cutting action for finishing tasks, limiting burr formation and enabling tight tolerances with minimal secondary processing. As an uncoated cermet specifically intended for steel finishing, the grade helps deliver predictable wear behaviour and consistently good surfaces on long runs. The robust carbide body provides reliable indexability, making the insert a practical choice for small‑batch flexibility and serial production alike. If further specifications are required for a particular machine‑workpiece combination, technical guidance is available to confirm the best match. For precision finishing applications using Tungaloy inserts, request application advice or place an order through Metav Werkzeuge to ensure rapid supply and the correct tool specification Technical data Article number: 6762753 Manufacturer SKU: TUN6762753 Manufacturer item number: 6762753 Model series: ISO‑Drehwendeschneidplatten Material: Carbide Brand: Tungaloy SKU: 6762753‑Tungaloy Facts Corner radius: 0.2 mm Insert size: 07 Thickness: 2.38 mm Clearance angle: 11° Geometry angle: 55° Special features Rhombic shape Cylindrical hole + one‑sided countersink (40°–60°) Single‑sided chipbreaker Uncoated cermet grade NS9530 for finishing ISO‑standard insert for external and internal turning Compatible with ISO holders by form, clearance, tolerance, fixation, size and thickness FAQ What materials is this insert suitable for? The Tungaloy DPMT070202 NS9530 turning insert is specified as a finishing grade for steel and is optimised for continuous cutting and small depths of cut. Will this insert fit existing ISO turning holders? Compatibility is determined by form, clearance angle, tolerance class, fixation, size and thickness; the DPMT070202 follows ISO geometry standards to ensure fit with matching ISO holders. How does the uncoated cermet grade affect surface finish? The uncoated cermet NS9530 provides a very sharp edge and low cutting forces, which contributes to improved surface quality and reduced need for secondary finishing. What is the purpose of the cylindrical hole with countersink? The cylindrical hole with a single‑side countersink (40°–60°) secures the insert location and ensures repeatable clamping for stable cutting performance. Is the insert suitable for internal and external turning? Yes, the ISO‑standard rhombic form is designed for both external and internal turning applications when used with the appropriate holder and parameters. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DPMT 070202 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of durable CVD-coated carbide, precise 55° rhombic geometry and an optimised chipbreaker for reliable stainless-steel turning; compatibility with ISO holders ensures straightforward integration. Order the insert directly via Metav Werkzeuge or consult our advisers for application support. DPMT 070202 T6215 Turning insert (DPMT070202) — Tungaloy DPMT070202 T6215 is an ISO-standard rhombic turning insert for general external and internal turning, designed for stainless-steel machining under stable to slightly interrupted cutting conditions CVD-coated carbide grade T6215 Optimised for stainless-steel machining 55° rhombic geometry for versatile turning 0.2 mm corner radius for defined profile With hole and 40°–60° countersink Reliable cutting with a wear-resistant coating The CVD-coated carbide of this insert delivers consistent wear resistance, especially in demanding stainless-steel applications. The CVD process applies a hard, thermally stable layer over a tough carbide substrate, which reduces flank wear and prolongs life under moderate cutting forces. This results in fewer tool changes and more predictable batch output, supporting higher machine utilisation and lower production interruptions. Predictable geometry for consistent part quality A 55° rhombic geometry combined with a 0.2 mm corner radius offers a balance between strength and surface definition. The included geometry provides stable cutting behaviour and repeatable chip formation, which helps maintain dimensional accuracy and surface finish across runs. For operators new to indexable tooling: the corner radius affects the workpiece profile and must be matched to feed rate to avoid overloading the cutting edge. Designed for straightforward integration and secure clamping The insert conforms to ISO standards for turning plates, so compatibility with holders depends on form, relief angle, tolerance class, attachment and plate thickness. The 11° relief angle and the specified plate thickness (2.38 mm) ensure correct seating in standard seats; the central hole with a cylindrical bore and single-sided countersink (40°–60°) enables secure fastening and consistent location in the pocket, reducing the risk of vibration and edge failure during stable turning operations. Application guidance and performance benefits The T6215 grade is a CVD-coated, wear-resistant option tailored to turning stainless steels under stable to slightly interrupted conditions. Use this indexable insert for external and internal turning where good chip control and edge stability are required; the single-sided chipbreaker promotes controlled chip flow and reduces the chance of entanglement in long, continuous cuts. Selecting the right grade and chipbreaker according to workpiece alloy and machining stability will enhance tool life and process reliability. For reliable stainless-steel turning choose Tungaloy’s T6215-coated insert—contact Metav Werkzeuge for application advice or to place an order: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6951338 Manufacturer SKU: TUN6951338 Model series: ISO turning inserts Material: carbide Data Plate designation: DPMT070202 Grade/coating: T6215 (CVD-coated) Insert size: 07 Plate thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 55° Hole: with hole — cylindrical + single-sided countersink (40°–60°) Special features Plate shape: rhombic Chipbreaker: single-sided Typical applications: external and internal turning Suitable material group: stainless steels System components: ISO turning plate, matching external holder or boring bar, shim/clamping set and replacement screws FAQ What materials is this insert best suited for? The DPMT070202 T6215 insert is optimised for machining stainless steels; the CVD-coated carbide grade delivers wear resistance suitable for stable to slightly interrupted turning. How does the chipbreaker affect performance? The single-sided chipbreaker on this insert promotes controlled chip formation during continuous cuts, improving machining safety and helping to protect the cutting edge. What holder requirements must be met for correct fitting? Compatibility depends on the holder form, relief angle, tolerance class, fastening method, size and plate thickness; the insert’s 11° relief and 2.38 mm thickness suit standard ISO turning holders. Can the insert be used for internal and external turning? Yes—this rhombic insert is intended for both external and internal turning operations when paired with the appropriate holder or boring bar. What does the T6215 grade offer compared with general-purpose grades? T6215 is a CVD-coated, wear-resistant grade tailored to stainless-steel machining, prioritising stable edge life and predictable wear behaviour under typical turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070202 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T6215 and the ISO rhombic geometry for consistent, cost-effective turning of stainless steel; order directly via Metav Werkzeuge or contact our consultants for tailored tooling advice. DPMT 070202 T6215 Turning Insert for Turning — Tungaloy DPMT070202 T6215 is a rhombic ISO turning insert designed for external and internal turning of stainless steel under stable to lightly interrupted cutting conditions CVD-coated carbide grade T6215 ISO rhombic 07 geometry, 55° cutting angle Single-sided chipbreaker for controlled chips Central hole with cylindrical countersink Precision geometry for reliable turning The rhombic 07 shape with a 55° main cutting angle and 11° clearance ensures stable engagement and predictable cutting forces during external and internal turning operations. A corner radius 0.2 mm provides a fine balance between edge strength and surface finish, while the 2.38 mm plate thickness contributes to rigidity and tool life. These geometric choices translate into steady component tolerances and fewer insert changes, supporting continuous production with lower tool-related downtime. Durable coating suited to stainless steel A CVD-coated carbide grade T6215 was selected to resist the abrasive and adhesive wear mechanisms typical when machining stainless steel. The chemical vapour deposition layer enhances flank and crater wear resistance and helps maintain a sharp cutting edge under stable or slightly interrupted cut patterns. For workshops aiming to extend tool life and improve first-pass quality, this coating-grade combination reduces rework and contributes to predictable operating costs. Controlled chip formation and secure clamping The single-sided chipbreaker promotes reliable chip control for turning applications, aiding evacuation and preventing surface damage on long or slender parts. The insert is supplied with a central hole featuring a cylindrical bore and a one-sided countersink (40°–60°), enabling positive, repeatable clamping in compatible holders. Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness, so matching the insert geometry to the chosen clamping system is key to process stability. Practical application and system considerations Intended for general turning tasks, these ISO-standard inserts form part of a system comprising an insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws. Select the chipbreaker and grade according to workpiece material, machining strategy and machine-tool stability to achieve optimum productivity. For users less familiar with insert selection, specifying the intended operation (external/internal turning), material grade and machine capability will speed up the recommendation process and reduce trial-and-error on the shop floor. Contact Metav Werkzeuge for specification support and to order Tungaloy DPMT070202 T6215 turning inserts for reliable stainless steel machining — Metav Werkzeuge is available by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6945262 Manufacturer SKU: TUN6945262 Our SKU: 6945262-Tungaloy Model series: ISO-Drehwendeschneidplatten Core dimensions Plate form: rhombic Plate size: 07 Plate thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 11° Cutting angle: 55° Hole: with cylindrical hole + one-sided countersink (40°–60°) Materials & special features Material: CVD-coated carbide (grade T6215) Chipbreaker: single-sided Application: turning (external and internal) Compatible with holders when form/clearance/tolerance/fastening/size/thickness match System components: external holder or boring bar, shim/clamp set, spare screws Suited to machining stainless steel under stable to slightly interrupted conditions FAQ What materials is the insert suited to? The insert is designed for machining stainless steel; the T6215 CVD-coated carbide is chosen to provide wear resistance and edge stability for such materials. Which operations can this insert be used for? It is suitable for both external and internal turning operations when mounted in a compatible holder; select the chipbreaker and clamping method based on the specific machining setup. How does the chipbreaker affect performance? The single-sided chipbreaker on this insert promotes controlled chip formation and evacuation, improving surface quality and reducing risk of chip entanglement during turning. What should be considered when matching a holder? Compatibility depends on insert form, clearance angle, tolerance class, fastening style, size and thickness; ensure the holder accepts a rhombic 07 ISO insert with the specified hole and countersink geometry. Is this insert compatible with interrupted cuts? The grade is intended for stable to lightly interrupted conditions; heavy interruptions may require a different grade or modified machining strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070202 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T6215 carbide grade and the rhombic 07 geometry with a 0.2 mm corner radius for consistent, long-life performance in turning stainless steels; order directly through Metav Werkzeuge or consult the technical team for application-specific recommendations. DPMT 070202 T6215 — Indexable Turning Insert for Stable Stainless-steel Turning by Tungaloy DPMT070202 T6215 is an ISO rhombic turning insert designed for external and internal turning where reliable wear resistance and predictable chip control are required CVD-coated carbide T6215 grade Optimised for stainless steels Rhombic insert, size 07, 0.2 mm radius Cylindrical hole with single-side countersink Consistent wear resistance for stainless-steel turning The CVD-coated carbide composition of this insert, designated T6215, delivers a robust balance between wear resistance and edge stability when machining stainless steels under stable to mildly interrupted conditions. The coating reduces flank wear and increases hot hardness, which means longer tool life and fewer insert changes during serial production. For turning applications, this results in reduced downtime and more predictable component tolerances compared with uncoated grades. Precise geometry that supports secure clamping and accurate results The rhombic 07 form and the 0.2 mm corner radius combine to produce a versatile cutting edge suitable for finishing and light to medium roughing passes. The insert’s cylindrical hole with a single-side countersink (40°–60°) ensures positive location and repeatable clamping in compatible holders; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness. Machining set-ups benefit from the ISO-standard geometry, enabling fast index changes and straightforward inventory management. Efficient chip control and process stability Equipped with a one-sided chipbreaker and engineered for turning, the insert supports stable chip formation when matched to the appropriate feed and depth of cut. The 11° clearance angle and the 55° major angle promote controlled shearing, which reduces chatter and improves surface finish. In production environments seeking predictable throughput, selecting the correct chipbreaker and grade per material and machining conditions enhances process security and productivity. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy carbide inserts into existing tooling systems and to check current availability and delivery options via Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: 6951262-Tungaloy Manufacturer SKU: TUN6951262 Model series: ISO-Drehwendeschneidplatten Label: DPMT070202 T6215 Tungaloy-Wendeplatte Core numerical data Major angle: 55° Clearance (relief) angle: 11° Plate thickness: 2.38 mm Corner radius: 0.2 mm Plate size: 07 Special features and materials CVD-coated carbide (T6215) Rhombic insert form With hole: cylindrical hole + single-side countersink (40°–60°) One-sided chipbreaker Intended application: turning Suitable for stainless steels ISO-standard indexable insert system FAQ What applications suit this insert best? The DPMT070202 T6215 Tungaloy indexable turning insert is intended for external and internal turning, especially when machining stainless steels under stable to mildly interrupted cutting conditions. Is the insert compatible with standard ISO holders? Compatibility with ISO turning holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the DPMT070202 geometry follows ISO conventions to ensure broad holder compatibility. Which material does the T6215 grade target? The T6215 CVD-coated carbide grade is optimised for machining stainless steels, providing improved wear resistance and thermal stability compared with uncoated grades. Can the insert be indexed for multiple edges? Yes, the rhombic DPMT070202 insert offers multiple usable cutting edges; correct orientation and secure clamping in the matching holder are essential for repeatable results. What is the hole style and why does it matter? The insert has a cylindrical hole with a single-side countersink (40°–60°), which supports reliable positioning and clamping in dedicated insert seats, improving repeatability and assembly speed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070202 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, ISO conformity and precise geometry for reliable medium-steel turning, ensuring high productivity and predictable tool life. Order the insert directly via Metav Werkzeuge or consult our team for process advice. DPMT 070202 T9215 ISO turning insert by Tungaloy — CVD-coated carbide, 0.2 mm corner radius The DPMT070202 T9215 is an ISO rhombic turning insert designed for external and internal turning applications, tailored to medium steel machining and compatible with standard ISO holders. ISO rhombic insert DPMT 070202 CVD-coated carbide grade T9215 One-sided chipbreaker for medium steel Cylindrical hole with 40°–60° countersink Consistent productivity through robust material and coating The combination of CVD-coated carbide and the T9215 grade provides a balanced mix of wear resistance and fracture toughness, optimised for sustained productivity in medium-steel applications. This construction reduces flank and crater wear during continuous to slightly interrupted cuts, which translates into longer tool life and fewer indexings. For production environments where cycle times and repeatability matter, the material and coating choice delivers measurable stability and cost-efficiency without sacrificing component quality. Precise geometry and ISO compatibility reduce setup errors Built to ISO specifications, the rhombic insert geometry with a 0.2 mm corner radius and 11° clearance angle ensures predictable cutting behaviour and repeatable part quality. Compatibility with matching holders is governed by form, clearance, tolerance class, fastening method, size and thickness, so correct selection of the mating clamping set guarantees secure seating and minimised runout. The cylindrical hole with single-sided countersink (40°–60°) supports reliable clamping and simplified replacement, lowering setup time and reducing unplanned stoppages. Improved chip control and surface finish for dependable results The single-sided chipbreaker geometry is optimised for medium-steel feeds and depths, delivering controlled chip formation and evacuation. Better chip control reduces the risk of vibration and built-up edge, which in turn improves surface finish and dimensional consistency on turned parts. The insert’s design supports efficient heat dissipation and steady cutting forces, helping maintain consistent tolerances in batch production and supporting predictable process cycles on CNC lathes and turning centres. Application focus and system considerations for process planning Intended primarily for turning, the insert integrates into a system comprising the ISO insert, a suitable external holder or boring bar, a locating pad or clamping set, and replacement screws. Selecting the right chipbreaker and grade according to workpiece material, machining type and assembly rigidity will ensure optimal performance. The grade’s emphasis on a broad material range and stable chip formation makes it a practical choice for job shops and production lines seeking a versatile, reliable cutting solution. For secure and productive medium-steel turning, select the Tungaloy DPMT070202 in grade T9215 and contact Metav Werkzeuge for tailored process recommendations and ordering details: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6945261 Manufacturer SKU: TUN6945261 SKU: 6945261-Tungaloy Model series: ISO turning inserts Material: carbide Facts Corner radius: 0.2 mm Plate thickness: 2.38 mm Clearance angle: 11° Included angle: 55° Size designation: 07 Special features ISO designation: DPMT070202 Grade/coating: T9215, CVD-coated carbide Chipbreaker: one-sided Hole: with cylindrical hole and single-sided countersink (40°–60°) Plate shape: rhombic Application: turning (external and internal) Typical system: ISO insert + holder/boring bar + clamping set and screws FAQ What materials is this insert intended for? The Tungaloy DPMT070202 in grade T9215 is primarily intended for medium steel machining, offering a balance of wear resistance and toughness suitable for continuous to lightly interrupted cuts. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO geometry guidelines; compatibility depends on matching form, clearance, tolerance class, fastening, size and thickness when installed in an ISO holder or boring bar. How does the chipbreaker affect performance? The one-sided chipbreaker provides controlled chip formation for medium-steel turning, improving chip evacuation, reducing vibration and enhancing surface finish during production runs. What are the key geometric specifications to consider for setup? Relevant specifications include the 0.2 mm corner radius, 2.38 mm plate thickness, 11° clearance angle and the rhombic plate shape; these determine cutting forces, feed limits and clamping requirements. Can this insert be used for internal turning? Yes — the insert is suitable for both external and internal turning when paired with an appropriate boring bar and correct clamping components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070202 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9215 grade combined with a precise 0.2 mm nose radius and an 11° clearance angle for efficient, high-productivity turning of medium steels; order the insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. DPMT 070202 T9215 — Indexable Turning Insert by Tungaloy (for Turning) the DPMT070202 T9215 is an ISO‑standard rhombic turning insert designed for productive external and internal turning applications in medium steels CVD-coated carbide grade T9215 Rhombic ISO 07 form with 0.2 mm nose radius 11° clearance angle for stable cutting Cylindrical hole with single‑side countersink 40°–60° High productivity through wear‑resistant CVD coating The combination of a CVD‑coated carbide substrate and the T9215 grade delivers a balanced mix of wear resistance and fracture toughness tailored to medium‑range steel machining. This results in longer tool life under continuous or lightly interrupted cuts and fewer insert changes, which directly reduces machining downtime. The coated surface also supports consistent edge behaviour, making surface finishes more predictable even in demanding production runs. Precise geometry for repeatable, stable turning A rhombic ISO 07 form with a 0.2 mm nose radius and an 11° clearance angle provides dependable geometry for turning operations where both dimensional control and tool life matter. The insert’s cylindrical hole with single‑side countersink (40°–60°) ensures secure clamping and consistent seat positioning in compatible holders. Together, these features simplify setup, reduce vibration risk and support reproducible part tolerances across batches. Practical compatibility and recommended use cases Designed as part of an ISO indexable insert system, this cutting grade suits standard turning toolholders and boring bars that accept the DPMT form. The T9215 grade is recommended as a first choice for mid‑range steel machining where productivity and predictable wear performance are priorities. Select an appropriate chipbreaker and holder stiffness according to workpiece stability to maximise throughput and surface quality. Order or enquire through Metav Werkzeuge for application guidance or batch supply; our consultants provide pragmatic advice on holder compatibility and chipbreaker selection to match the Tungaloy grade to specific turning tasks. Technical data Article number: 6951334 Manufacturer SKU: TUN6951334 SKU: 6951334-Tungaloy Designation: DPMT070202 T9215 Tungaloy insert Facts Radius: 0.2 mm Clearance angle: 11° Included angle: 55° Thickness: 2.38 mm Size: 07 Hole: with hole, cylindrical hole + single‑side countersink (40°–60°) Special features CVD‑coated carbide (grade T9215) Rhombic plate form One‑sided chipbreaker For turning (external and internal) Suitable for continuous to light interrupted cuts ISO‑standard indexable turning insert series Compatibility determined by form, clearance, tolerance class and size FAQ What materials is this insert best suited for? The DPMT070202 T9215 insert is optimised for medium steels; the CVD‑coated carbide T9215 combines wear resistance and toughness for productive steel turning. Which toolholders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance and plate size; this ISO‑standard rhombic insert fits holders and boring bars designed for DPMT 07 plates. How does the 0.2 mm nose radius affect part finish? The 0.2 mm nose radius improves edge strength while supporting a fine surface finish on turned parts when combined with appropriate feeds and speeds using the T9215 grade. Can this insert handle interrupted cuts? Yes, the T9215 grade is suitable for continuous to light interrupted cuts, offering a balance of fracture resistance and wear life for such conditions. What does the hole and countersink design offer? The cylindrical hole with single‑side countersink (40°–60°) ensures secure clamping and precise seat alignment in compatible holders, aiding repeatability of the cutting edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070202 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, breakage safety and precise geometry for reliable, productive turning of medium steels; the insert supports continuous to light interrupted cuts and simple clamping systems. Order the DPMT070202 T9215 insert directly via Metav Werkzeuge or ask our consultants if needed. DPMT 070202 T9215 — DPMT indexable turning insert for turning, Tungaloy (CVD-coated carbide, 55°) DPMT 070202 T9215 is an ISO‑standard indexable turning insert intended for external and internal turning operations, featuring a 55° rhombic form and a single-sided chipbreaker suited to medium‑steel machining ISO DPMT 070202 geometry CVD‑coated T9215 grade 55° rhombic insert form 0.2 mm nose radius for fine finishing Productive medium‑steel turning with proven grade and coating The T9215 grade combines a CVD‑coated surface with a tough carbide substrate to offer a balanced mix of wear resistance and fracture toughness. This makes the insert well suited to medium steel where high metal removal rates are required without compromising edge stability. The combination of substrate and coating reduces flank and crater wear, extending tool life in continuous to light interrupted cuts and increasing uptime on production machines. Geometry engineered for versatile turning and good surface quality A 55° included angle and rhombic form provide flexible approach angles for both external profiling and internal turning near shoulders. The 0.2 mm nose radius supports a fine surface finish while limiting cutting forces during finishing passes. With a single‑sided chipbreaker, the insert controls chip form for stable evacuation in typical turning setups, which simplifies process parameters and contributes to consistent part quality. Compatibility, clamping and assembly explained for ease of use The insert follows ISO dimensions and its fit to a holder depends on the insert form, relief angle, tolerance class, attachment style, size and thickness. The insert is supplied with a hole and a cylindrical hole plus a single‑side countersink (40°–60°), enabling secure screw clamping with standard seats and backup pads. The moderate 2.38 mm thickness and size designation 07 match common indexable turning holders, so replacement in existing tool systems is straightforward when holder specifications are observed. Process benefits and recommended application window Designed for turning operations, the insert is optimised for productive machining of medium steels where a compromise between wear life and edge security is needed. It performs well at elevated cutting speeds thanks to the CVD coating and is recommended for continuous to slightly interrupted cuts rather than heavy interrupted conditions. The balance of properties supports improved cycle times, fewer indexings per part batch and reliable surface results over long runs. Contact Metav Werkzeuge today for application advice and to reserve DPMT070202 T9215 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and cutting parameters Technical data Article number: 6951259 SKU: 6951259-Tungaloy Manufacturer SKU: TUN6951259 Model series: ISO‑Drehwendeschneidplatten ISO designation: DPMT070202 Numbers / Core technical data Insert size: 07 Thickness: 2.38 mm Nose radius: 0.2 mm Relief angle: 11° Included angle: 55° Hole style: with hole; cylindrical hole + one‑side countersink (40°–60°) Designs / Special features Carbide substrate with CVD‑coated grade T9215 Rhombic insert form Single‑sided chipbreaker Intended application: external and internal turning Recommended for medium steel and continuous to light interrupted cuts Compatibility determined by form, relief angle, tolerance class, attachment, size and thickness FAQ What materials is this insert best suited for? The DPMT070202 T9215 insert is optimised for medium steel, leveraging the CVD‑coated T9215 grade and carbide substrate to balance wear resistance and toughness. Can this insert be used for internal turning operations? Yes, the rhombic 55° geometry and the insert form make it suitable for both external and internal turning where geometry and holder access permit. How does the hole and countersink affect clamping? The insert is supplied with a hole and a cylindrical hole plus single‑side countersink (40°–60°), allowing secure screw clamping on standard insert seats and simplified replacement. What surface finish can be expected with a 0.2 mm nose radius? A 0.2 mm nose radius supports fine finishing passes that produce good surface quality while keeping cutting forces moderate during profiling and light finishing. Is the insert suitable for interrupted cuts? The insert is intended primarily for continuous to light interrupted cuts; heavy interruptions or severe shock loads may require a different grade or geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com