DPMT 070202 T9225 Wendeplatten - Tungaloy
Robust CVD-coated carbide in a rhombic 55° geometry with a 0.2 mm corner radius ensures consistent performance and stable chip formation in medium to heavy steel turning; excellent clamping reliability thanks to the cylindrical hole with single-sided countersink. Order the DPMT070202 T9225 Tungaloy turning insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DPMT070202 T9225 — Tungaloy turning insert, rhombic 55° CVD-coated carbide The DPMT070202 T9225 is an ISO-standard rhombic turning insert designed for external and internal turning operations, offering a universal grade optimised for interrupted and variable engagement conditions. ISO-standard rhombic insert, 55° diamond CVD-coated carbide grade T9225 Robust for medium to heavy steel turning Cylindrical hole with 40°–60° countersink Accurate cutting performance for consistent cycle times The combination of a CVD-coated surface and the T9225 cutting grade provides a balance of wear resistance and toughness that reduces flank wear under varying engagement conditions. As an indexable insert, its coating limits adhesion and thermal degradation while the substrate maintains edge integrity during heavier cuts. This results in more predictable tool life and fewer unplanned tool changes, supporting continuous production and reduced machining variability. Stable geometry and secure clamping for repeatable results A 55° rhombic geometry paired with a corner radius 0.2 mm offers a compromise between edge strength and surface finish. The plate thickness 2.38 mm increases rigidity under radial loads, while the cylindrical hole with single-sided countersink (40°–60°) ensures positive seating and reliable clamping with compatible holders. Together these features decrease vibration and enable stable chip formation, which improves surface quality and dimensional repeatability on turned components. Optimised for steel turning and flexible in application The robust universal grade is intended primarily for steel machining in medium to heavy cuts and copes well with slightly interrupted cuts where additional toughness is required. The single-sided chipbreaker assists in controlled chip flow for many turning tasks, simplifying post-process handling. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening, size and thickness; Metav Werkzeuge can advise on matching holders and clamping sets for specific setups. For dependable performance in demanding turning operations, order the Tungaloy DPMT070202 T9225 insert via Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com / +49 2822 7131930 for tailored application support Technical data Manufacturer article number: 6781350 SKU: 6781350-Tungaloy Manufacturer SKU: TUN6781350 Model series: ISO turning inserts Application: Turning WPL designation: DPMT070202 Facts Diamond angle: 55° Clearance angle: 11° Thickness: 2.38 mm Corner radius: 0.2 mm Size: 07 Special features Material: Carbide Coating/sort: T9225 (CVD-coated) Plate shape: Rhombic Hole style: Cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: One-sided Suitable for: Medium to heavy steel turning FAQ What materials is the insert best suited for? The Tungaloy DPMT070202 T9225 insert is optimised for medium to heavy steel turning, offering a universal balance of wear resistance and toughness suitable for variable engagement and slightly interrupted cuts. How does the wpl geometry affect machining? The 55° rhombic form combined with a 0.2 mm corner radius provides a compromise between edge strength and surface finish, enabling stable cutting forces and controlled chip formation during turning. Is the insert compatible with all ISO holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; the DPMT070202 conforms to ISO geometry but matching the specific holder design is required for correct seating and clamping. What role does the T9225 coating play? The T9225 CVD coating improves wear resistance and heat tolerance while the carbide substrate supplies toughness, making the grade reliable for longer tool life under demanding steel machining conditions. Which feature improves clamping reliability? The cylindrical hole with a single-sided countersink (40°–60°) is designed for secure seating and repeatable clamping, reducing the risk of movement under load and supporting consistent machining results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070202 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade designed for medium-to-heavy steel, the rhombic 55° geometry and a precise 0.2 mm corner radius for consistent machining results. Order directly via Metav Werkzeuge or consult our specialists for application advice. DPMT 070202 T9225 ISO indexable turning insert for Turning — Tungaloy The DPMT070202 T9225 is an ISO rhombic indexable insert intended for external and internal turning applications, offering robust performance in demanding steel machining. CVD-coated carbide for high toughness Rhombic 55° geometry for versatile turning 0.2 mm corner radius for accurate profiles One-sided chipbreaker for controlled chip flow Increased throughput through reliable cutting performance The combination of a CVD-coated carbide substrate and the T9225 grade delivers a reliable balance of wear resistance and toughness, specifically tuned for medium-to-heavy steel turning. This results in longer edge life under varying engagement conditions and when occasional interruption occurs in the cut. The 55° rhombic geometry enables stable cutting forces and flexible approach angles, which helps maintain higher feed and speed settings without compromising component tolerances or requiring frequent insert changes. Compatibility and secure clamping for predictable operation Compatibility with the toolholder is determined by holder form, relief angle, tolerance class, clamping method, size and thickness; the insert features a cylindrical hole with a single-sided countersink (40°–60°) for positive seating. The combination of hole design and the specified plate thickness ensures secure fixation in standard ISO external holders or boring bars. The one-sided chipbreaker supports consistent chip formation and evacuation, reducing the risk of entanglement and promoting predictable process stability during both external and internal turning tasks. Why the coating and grade matter for part quality A CVD-coated carbide insert like this provides a hard, wear-resistant outer layer bonded to a tough carbide substrate. Chemical vapour deposition (CVD) coatings increase resistance to abrasive wear and edge adhesion at elevated temperatures, while the underlying carbide maintains fracture toughness. The T9225 grade is a universal, robust option for workshop environments where cutting conditions change or where slightly interrupted cuts occur; it therefore supports consistent surface finish and dimensional accuracy across batches. Practical benefits at the machine and on the shop floor The small 0.2 mm corner radius is suitable for fine profile control and sharp internal contours while still offering sufficient edge strength for heavier passes when required. The rhombic shape and 55° included angle make the insert versatile for a range of turning operations, reducing the number of tool changes and supporting leaner tool inventories. Selecting the appropriate chipbreaker and matching the grade to the workpiece material will yield the best compromise between productivity and tool life, enabling more predictable cycle times and reduced downtime. For robust and versatile steel turning, specify the Tungaloy T9225 grade and contact Metav Werkzeuge for tailored advice or to place an order: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6951337 Manufacturer SKU: TUN6951337 Model series: ISO indexable turning inserts Label: DPMT070202 T9225 Tungaloy-Wendeplatte Facts Plate designation: DPMT070202 Plate size: 07 Plate form: rhombic, 55° included angle Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Special features Material: carbide Coating: CVD-coated carbide Grade: T9225 — robust universal for medium-to-heavy steel machining Chipbreaker: one-sided Typical application: external and internal turning Compatibility determined by holder form, relief angle, tolerance class, clamping, size and thickness FAQ Which materials is this insert suitable for machining? The DPMT070202 T9225 indexable turning insert by Tungaloy is optimised for medium-to-heavy steel machining but may be selected for similar ferrous applications where toughness is required. How does the T9225 grade affect performance? The T9225 grade combines a CVD-coated carbide surface with a tough substrate to provide wear resistance and fracture toughness, enhancing durability under variable engagement and slightly interrupted cuts. What does the hole and countersink provide during mounting? The cylindrical hole with a single-sided countersink (40°–60°) in the DPMT070202 insert ensures secure seating and reliable clamping in compatible ISO toolholders, improving repeatability and reducing movement under heavy loads. What advantages does the 0.2 mm corner radius offer? A 0.2 mm corner radius delivers precise profile control and improved edge strength for finishing passes, supporting fine contours without sacrificing resistance to chipping during heavier cuts. Is the insert suitable for both external and internal turning? Yes, the rhombic 55° geometry and the design features of the DPMT070202 Tungaloy insert make it appropriate for both external and internal turning operations when matched with the correct holder and machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070202 T9225 Wendeplatten - Tungaloy
Combining a CVD-coated cemented carbide substrate in T9225 grade with a rhombic 07 geometry and a 0.2 mm corner radius provides robust performance for medium-to-heavy steel turning; order the DPMT070202 T9225 indexable insert via Metav Werkzeuge or consult our specialists for application-specific advice. DPMT070202 T9225 indexable turning insert for medium-to-heavy steel — Tungaloy A DPMT070202 T9225 indexable turning insert in ISO‑standard rhombic 07 form, designed for reliable external and internal turning under variable engagement and light interruptions. CVD-coated cemented carbide grade T9225 For medium-to-heavy steel turning Rhombic 07 form, 11° clearance 0.2 mm corner radius with cylindrical hole Increased process reliability through tougher grade and coating The combination of a CVD-coated finish on a cemented carbide substrate and the T9225 grade is engineered for consistent performance where contact conditions vary. The coating reduces flank wear and extends edge life, while the tougher substrate offers improved resistance in interrupted cuts and heavier engagement, making the insert suitable for medium-to-heavy steel machining. This balance of wear protection and toughness results in fewer indexings and less tool-change downtime, improving net productivity on batch and single‑piece flows. Geometry and holder compatibility that simplify integration The rhombic 07 shape with an 11° clearance and 0.2 mm corner radius provides a versatile cutting geometry that is compatible with a wide range of ISO holders. Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; these factors should be matched to the toolholder and machining task. The insert is supplied with a cylindrical hole and one-sided countersink (40°–60°) for secure clamping. Clear identification of these features ensures the correct seating and repeatable positioning in external holders or boring bars. Practical advantages for workshop decision‑making Using this ISO insert reduces setup complexity and supports predictable component quality. The single‑sided chipbreaker is optimised for common steel grades and helps control chip flow in turning operations, lowering the risk of entanglement and improving surface finish. For operations seeking economic longevity, the T9225 grade delivers a reliable compromise between wear resistance and edge toughness, thereby lowering the frequency of insert changes and contributing to a steadier overall machining cost per part. Contact Metav Werkzeuge for tailored advice on Tungaloy turning inserts: info@metav-werkzeuge.com | +49 2822 7131930 — request grade and holder compatibility guidance or place an order through our team Technical data Article number: 6951260 SKU: 6951260-Tungaloy Manufacturer SKU: TUN6951260 Designation: DPMT070202 Facts Size: 07 Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Insert angle: 55° Countersink angle: 40°–60° Special features ISO turning insert, rhombic 07 form CVD-coated cemented carbide Grade T9225 for medium-to-heavy steel Single-sided chipbreaker Cylindrical hole with one-sided countersink Suitable for interrupted cuts Application: turning (external and internal) Compatible with appropriate external holders and boring bars FAQ What materials is this insert best suited for? This insert is specified for medium-to-heavy steel machining; the T9225 grade and CVD-coated surface are tuned to deliver toughness and wear resistance in steel turning. How does the chipbreaker influence performance? The single-sided chipbreaker on the insert promotes controlled chip formation in turning operations, improving surface finish and reducing risk of chip-related disturbances during cutting. How to ensure compatibility with a toolholder? Compatibility depends on insert form, clearance angle, tolerance class, fastening, size and thickness; match these parameters to the holder specifications to ensure correct seating and secure clamping of the insert. Is the coating beneficial for interrupted cuts? Yes—the CVD-coated layer combined with the tougher substrate reduces edge breakage and improves resilience during light interruptions or variable engagement, extending usable edge life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070204 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of reliable cutting performance, universal suitability for stainless steel and straightforward ISO compatibility to maintain a consistent production flow; order directly via Metav Werkzeuge or ask the consultants for tailored machining advice. DPMT 070204 AH6225 indexable turning insert for Turning – Tungaloy The DPMT070204 AH6225 is an ISO‑format indexable turning insert engineered for external and internal turning, offering a sharp but stable cutting edge for machining stainless steel under varying conditions. PVD-coated cemented carbide grade AH6225 Sharp yet robust cutting edge ISO‑format rhombic 07 with 11° clearance Suitable for external and internal turning Consistent cutting performance for varying conditions The combination of a PVD‑coating and a cemented carbide substrate gives the insert a balance of wear resistance and edge sharpness that supports medium‑depth turning operations. The AH6225 grade is formulated as a universal choice for stainless steel, providing stable chip formation and extended edge life where machining conditions change between batches or part geometries. This results in fewer indexings and a more predictable tool life, which benefits batch production and mixed‑lot workflows. Secure mounting and straightforward ISO compatibility Designed as an ISO‑format plate, the component fits standard holders when form, clearance angle, tolerance class, clamping and size match. The rhombic 07 shape with an 11° clearance and a 0.4 mm corner radius helps to reduce cutting forces at the corner while maintaining a controlled contact zone. The insert’s cylindrical hole with a single‑side countersink (40°–60°) ensures reliable seating and repeatable clamping when used with the correct backing pad, clamp set and replacement screw, reducing the risk of positional deviation during high‑speed turning. Practical selection and application guidance for turning tasks For outer and inner turning the one‑sided chipbreaker geometry supports consistent swarf control in through‑cut and profiling operations. Choose the chipbreaker and grade combination based on workpiece stability, material batch and depth of cut rather than increasing cutting speed alone. For general production of stainless steel, the AH6225 grade offers a practical compromise: good surface finish potential, stable edge retention and broad applicability across multiple stainless grades without frequent insert changes. For machining stainless steel with the AH6225 grade, contact Metav Werkzeuge for purchase and application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — guidance is available for holder selection and process optimisation. Technical data Article number: 6951279-Tungaloy Manufacturer article number: 6951279 Manufacturer SKU: TUN6951279 Model series: ISO turning indexable inserts Material: Cemented carbide Facts ISO designation: 070204 Size: 07 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Shape angle: 55° Hole: with hole Special features Grade/coating: AH6225, PVD‑coated Plate form: Rhombic Chipbreaker: One‑sided Hole style: Cylindrical hole + single‑side countersink (40°–60°) Typical application: External and internal turning Compatibility: ISO‑standard holder interface; requires matching form, tolerance and clamping FAQ Is this insert suitable for external and internal turning? The DPMT070204 AH6225 indexable turning insert is specified for both external and internal turning and is supplied in an ISO rhombic 07 format suitable for a wide range of applications. Which materials is the AH6225 grade intended for? The AH6225 grade is optimised as a universal grade for machining stainless steel, offering balanced wear resistance and edge sharpness for variable stainless steel turning tasks. How does the insert secure to the holder? The plate uses a cylindrical centre hole with a single‑side countersink (40°–60°) to ensure stable seating when combined with the appropriate backing pad, clamp set and replacement screw for ISO holders. What is the corner radius and why does it matter? The insert has a 0.4 mm corner radius; this small radius reduces cutting forces for finer profiles while still providing sufficient edge strength for medium cutting depths. Can the insert be used at high cutting speeds? The PVD coating and cemented carbide substrate support higher cutting speeds compared with uncoated grades, but optimal speed should be selected based on the specific stainless steel grade and workpiece stability. Is a specific chipbreaker required for different operations? The one‑sided chipbreaker of this insert is designed for general turning; for specialised finishing or heavy roughing, choose a chipbreaker and grade matched to the desired surface finish and chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DPMT 070204 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade engineered for rostfreier Stahl, a rhombic ISO form with an 11° clearance and a precise 0.4 mm nose radius for consistent surface finish and reliable chip control; order directly via Metav Werkzeuge or consult our specialists for application advice. DPMT070204 AH6225 — Rhombic ISO Turning Insert for Turning (Tungaloy) DPMT070204 AH6225 is a rhombic, ISO‑standard indexable insert designed for external and internal turning in workshop and production environments, optimised for rostfreier Stahl machining. PVD-coated carbide for rostfreier Stahl Rhombic ISO DPMT 07 form with 11° clearance 0.4 mm nose radius for controlled finish Precise edge geometry for consistent turning results The insert combines a PVD-coated carbide substrate with the AH6225 grade to deliver a sharp yet robust cutting edge suited to medium turning operations. This composition provides an advantageous balance between wear resistance and edge stability, which reduces the need for frequent insert changes in mixed‑condition production. The single‑sided chipbreaker supports predictable chip formation, while the modest 0.4 mm nose radius contributes to an improved surface finish without unduly raising cutting forces. For customers evaluating tooling strategies, these characteristics translate into fewer interruptions and steadier part quality during rostfreier Stahl turning. ISO conformity and simple mechanical compatibility Built to the ISO DPMT format, the plate’s rhombic profile, 11° clearance, and standard dimensions ensure compatibility with a wide range of holders and boring bars when the holder matches the form, tolerance class, fastening style, size and thickness. The insert includes a cylindrical central hole with a single‑side countersink (40°–60°) for secure clamping and repeatable seating. The 2.38 mm plate thickness and the specified relief geometry make the insert suitable for conventional clamping systems; when a matched seat and clamp are used, repeatable positioning and stable machining follow, supporting predictable cycle times and easier process setup. Application scope and productivity advantages Intended for both external and internal turning, the DPMT070204 AH6225 performs well where medium‑duty removal and a consistent surface finish are required. The universal AH6225 grade is formulated for rostfreier Stahl and varying cutting conditions, promoting a stable cutting edge that helps maintain surface quality across interrupted cuts or mixed batches. Selecting the correct chipbreaker and grade for the workpiece and machine stability maximises tool life and contributes to overall productivity gains. If further guidance is needed on matching the insert to specific workpiece alloys or machining parameters, the product data and compatibility notes provide a practical basis for selection. Contact Metav Werkzeuge for tailored recommendations on DPMT070204 AH6225 or to request application support: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6947704 Manufacturer SKU: TUN6947704 SKU: 6947704-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: DPMT070204 Material: Hartmetall (carbide) Grade/coating: AH6225 (PVD-coated) Numbers / Core technical data Nose radius: 0.4 mm Relief (clearance) angle: 11° Included angle: 55° Plate thickness: 2.38 mm Plate size: 07 Manufacturer article number: 6947704 Special features / Versions Rhombic plate form (DPMT) Single-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) With hole (for screw clamping) Designed for external and internal turning Universal grade for rostfreier Stahl ISO standard insert FAQ Which materials is the DPMT070204 AH6225 suitable for? The DPMT070204 AH6225 is a universal grade formulated primarily for rostfreier Stahl and performs well across a range of common turning tasks where a balance of edge sharpness and durability is required. How is compatibility with toolholders determined? Compatibility depends on the holder matching the insert’s ISO form, relief angle, tolerance class, fastening method, size and thickness; the DPMT070204 format and the cylindrical hole with countersink enable secure clamping in standard ISO seats. What does the AH6225 designation and PVD coating provide? AH6225 denotes a universal PVD‑coated carbide grade created for stable cutting behaviour in rostfreier Stahl; the PVD coating enhances wear resistance and maintains edge integrity under varying cutting conditions. Is the insert indexable and what chip control is available? This is a single‑sided indexable insert with a single‑sided chipbreaker; the geometry supports controlled chip formation for consistent surface finishes during medium turning tasks. What finish and machining performance can be expected with this insert? With a 0.4 mm nose radius and a sharp, stable edge, the DPMT070204 AH6225 achieves good surface finish and predictable cuts in medium operations; pairing the insert with an appropriate chipbreaker and stable mounting further improves results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070204 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 grade and a 0.4 mm corner radius for stable, repeatable stainless steel turning; the 55° rhombic geometry gives reliable chip control and predictable tool life — order directly via Metav Werkzeuge or consult our specialists for application support. DPMT070204 AH6225 Tungaloy indexable insert — for turning, PVD-coated carbide, 55° rhombic The DPMT070204 AH6225 indexable insert is a 55° rhombic turning plate, designed for medium machining of stainless steels with a single-sided chipbreaker and cylindrical hole for secure clamping. PVD-coated carbide grade AH6225 Optimised for stainless steel turning 55° rhombic form DPMT070204 0.4 mm corner radius, stable cutting edge Cylindrical hole with single-sided countersink Reliable cutting performance for stainless steels and mixed conditions The combination of a PVD-coated surface and a modern carbide substrate provides a balanced cutting edge that resists wear while remaining sharp enough for controlled metal removal. The AH6225 grade is formulated for stainless steels, offering good edge stability under changing conditions and medium cutting parameters. This results in consistent dimensional accuracy and surface finish when performing external or internal turning operations. The 0.4 mm corner radius supports reduced cutting forces and improved edge life compared with finer radii, making the insert suitable for a range of component geometries without frequent tool changes. Straightforward compatibility and secure clamping for ISO turning systems The rhombic 55° geometry conforms to ISO turning insert standards and fits into matching external holders or boring bars where form, relief angle and tolerance class align. The insert’s cylindrical hole with single-sided countersink (40°–60°) ensures reliable seating and repeatable positioning in the clamping pocket. For workshop planning, note the plate thickness of 2.38 mm and size designation 07 when selecting a compatible holder or screw set. Correct selection of holder and mounting hardware helps to maintain rigour in process set-up and reduces vibration, which improves tool life and part quality. Economical machining through robust coating and controlled chip formation A single-sided chipbreaker matched to the grade promotes controlled chip flow when turning stainless steels, reducing the risk of stringing and improving surface integrity. The PVD coating enhances thermal resistance and reduces built-up edge tendencies common with stainless materials. Together with the stable cutting edge, this leads to longer intervals between indexings and lower tool consumption overall. For production environments seeking predictable cycle times and repeatable results, the insert’s balanced specification supports process stability and efficient use of machine time. Contact Metav Werkzeuge for application advice and to obtain the DPMT070204 AH6225 insert; our team can confirm holder compatibility and cutting-parameter recommendations — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6951345 SKU: 6951345-Tungaloy Manufacturer SKU: TUN6951345 Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Relief angle: 11° Included angle: 55° Plate thickness: 2.38 mm Plate size: 07 Special features PVD-coated carbide grade AH6225 Rhombic 55° shape (DPMT070204) Cylindrical hole with single-sided countersink (40°–60°) Single-sided chipbreaker Designed for turning (external and internal) Compatible with ISO turning holders FAQ What materials is this insert best suited for? The DPMT070204 AH6225 insert is optimised for machining stainless steels and performs well under medium cutting conditions where a stable edge and good chip control are required. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class and clamping system; the insert follows ISO geometry for 55° rhombic indexable inserts and fits holders designed for the DPMT070204 format. What does the AH6225 grade offer in practice? AH6225 is a PVD-coated carbide grade that balances a sharp cutting edge with wear resistance, offering reliable performance across varying stainless-steel alloys and intermittent cutting conditions. How does the chipbreaker affect machining? The single-sided chipbreaker promotes controlled chip formation for turning operations, reducing the likelihood of long, stringy chips and helping to protect the workpiece surface. Which SKU should be quoted when ordering? Please reference SKU 6951345-Tungaloy or the manufacturer SKU TUN6951345 when enquiring or placing an order for the DPMT070204 AH6225 indexable insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070204 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, a 0.4 mm corner radius for predictable edge strength, and standard ISO geometry for simple holder compatibility; order the insert through Metav Werkzeuge or consult the team for application advice. DPMT 070204 AH8015 Turning Insert — PVD-coated carbide, 0.4 mm radius, Tungaloy DPMT 070204 AH8015 is an ISO‑standard rhombic turning insert designed for general turning of heat‑resistant alloys and similar applications ISO rhombic insert, size 07, 11° clearance PVD-coated carbide AH8015 grade 0.4 mm corner radius for robust edges Cylindrical hole + single-sided countersink Consistent wear resistance and reliable edge stability for turning operations The insert combines a PVD‑coated carbide substrate with the balanced AH8015 grade to deliver a compromise between wear resistance and edge toughness. The 0.4 mm corner radius provides predictable strength at the cutting edge, reducing the risk of premature chipping during interrupted cuts while maintaining acceptable surface finish in general turning. This geometry and grade pairing is particularly suited to machining heat‑resistant alloys where thermal and mechanical stresses demand a stable cutting edge. The result is longer in‑service life and fewer unscheduled indexings, supporting efficient shopfloor throughput. ISO compatibility and secure clamping reduce setup time Manufactured to ISO dimensions, the insert is compatible with a wide range of external holders and boring bars when form, relief angle, tolerance class, fastening and thickness match. The plate’s cylindrical hole with a one‑sided countersink (40°–60°) ensures secure clamping and repeatable seating, which in turn minimises vibration and improves tool life. A nominal thickness of 2.38 mm, rhombic 07 format and a 11° relief angle yield a stable package for both external and internal turning set‑ups; the standardised geometry simplifies tooling logistics and reduces the variety of holders required for mixed production. Target applications and productivity gains for workshop use With a single‑sided chipbreaker and the AH8015 cutting grade, this insert is a practical choice for general turning of heat‑resistant alloys and similar materials where a balance of productivity and surface quality is required. The insert supports both finishing and medium turning when matched with appropriate cutting parameters and holder rigidity, and the ISO form facilitates quick replacement and inventory control. By selecting the correct chipbreaker and grade for the workpiece and machining conditions, machining cycles become more consistent and less reliant on frequent tool interventions, thereby improving overall process reliability and reducing unit costs. For machining tasks requiring dependable performance with heat‑resistant alloys, request the Tungaloy AH8015 grade from Metav Werkzeuge — technical consultants are available and orders can be placed via info@metav-werkzeuge.com or by calling +49 2822 7131930. Technical data Article number: 6951280-Tungaloy Manufacturer article number: 6951280 Manufacturer SKU: TUN6951280 Name/label: DPMT070204 AH8015 Tungaloy turning insert Dimensions & measurable data Corner radius: 0.4 mm Insert size: 07 Thickness: 2.38 mm Relief (clearance) angle: 11° Lead (approach) angle: 55° Hole style: cylindrical hole + one-sided countersink (40°–60°) Materials & special features Material: carbide Grade/coating: PVD‑coated AH8015 Chipbreaker: single-sided Application: turning (external and internal) Series: ISO turning indexable inserts Mounting: compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials are recommended for this insert? DPMT 070204 AH8015 is intended primarily for the general turning of heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for such materials. Is the insert compatible with standard ISO turning holders? Yes, the insert follows ISO dimensions—compatibility depends on matching form, relief angle, tolerance class, fastening method, size and thickness to the chosen holder. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius increases edge robustness and helps prevent chipping in interrupted cuts while still delivering acceptable surface finish for general turning tasks. What does the hole style mean for clamping reliability? The cylindrical hole with a one‑sided countersink (40°–60°) yields secure clamping and repeatable seating, which improves stability and tool life under regular operating conditions. Which chipbreaker type is fitted and what is its benefit? The insert has a single‑sided chipbreaker, suitable for a range of turning operations where controlled chip formation and evacuation are required to maintain process consistency. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DPMT 070204 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced combination of PVD-coated carbide wear resistance, a 0.4 mm corner radius for reliable profile control and ISO compatibility for simple holder selection; order the inserts directly via Metav Werkzeuge or consult our specialists for application advice. DPMT 070204 AH8015 indexable insert for turning — PVD-coated carbide, rhombic 07 (Tungaloy) DPMT 070204 AH8015 is an ISO-standard indexable insert for turning, designed for general-purpose external and internal turning of heat-resistant alloys with a focus on consistent edge stability and economical tool life PVD-coated carbide for heat resistance ISO‑standard form with rhombic 07 shape 11° clearance and 55° lead angle Cylindrical hole with single-sided countersink Consistent metal removal for demanding turning operations The DPMT070204 AH8015 insert is engineered for steady metal removal where a balance between wear resistance and edge stability is required. The PVD-coated carbide grade provides enhanced hot-hardness, which improves performance on heat-resistant alloys and similar difficult-to-machine materials. With a defined 0.4 mm corner radius and an included single-sided chipbreaker, this insert reduces vibration and supports predictable chip formation, leading to fewer interruptions and more uniform part quality. The result is a reliable machining sequence that helps maintain throughput without sacrificing surface finish. Longer service life and process security through optimised geometry A combination of the AH8015 grade, controlled clearance and a 55° lead angle delivers repeatable cutting behaviour and robust edge retention. The 11° clearance reduces rubbing at entry and exit, while the rhombic cut geometry (rhombic 07) allows flexible positioning for both roughing and finishing passes. This geometry supports efficient coolant access and consistent tool engagement, which improves tool life and lowers overall machining costs per component. The balanced design is particularly suitable for workshops aiming to increase productivity while keeping tool inventory and set-up complexity manageable. Practical compatibility and straightforward integration into existing toolsets Supplied to ISO dimensions, the insert fits standard ISO holders when matched by form, clearance angle, tolerance class, clamping and thickness. The rhombic 07 outline and the cylindrical hole with single-sided countersink (40°–60°) ensure secure clamping and easy indexing during regrinds or replacements. As a single-sided insert with a dedicated chipbreaker, it simplifies spare-part management and reduces the number of grades needed for mixed production. Where uncertainty exists regarding holder compatibility or material selection, a short consultation can prevent costly trial-and-error and secure the desired surface quality and cycle times. For machining of heat‑resistant alloys with consistent results, contact Metav Werkzeuge for specific application advice and stock information at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will recommend the optimal insert configuration and supply options. Technical data Article number: 6762757 SKU: 6762757-Tungaloy Manufacturer SKU: TUN6762757 Material: Cemented carbide Model series: ISO indexable inserts Facts Lead angle: 55° Clearance angle: 11° Thickness: 2.38 mm Corner radius: 0.4 mm Size: 07 Special features PVD-coated carbide grade AH8015 Rhombic insert shape Cylindrical hole with single-sided countersink (40°–60°) Single-sided chipbreaker For turning (external and internal) ISO‑standard dimensions; compatibility determined by holder form, clearance, tolerance, clamping, size and thickness FAQ What materials is this insert suitable for? The DPMT070204 AH8015 insert is optimised for heat‑resistant alloys and similar high‑temperature materials; the PVD coating and AH8015 grade balance wear resistance and edge stability for these applications. Can this insert be used for both roughing and finishing? Yes. The rhombic 07 geometry and the single-sided chipbreaker provide flexibility for light finishing and general-purpose turning operations when the cutting data are adjusted accordingly. How is the insert held in the toolholder? The insert has a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping; correct holder selection follows ISO form and the insert thickness and size. What does the designation DPMT070204 mean? The code indicates the insert form, size and geometry according to ISO conventions; the DPMT family denotes a rhombic indexable insert in size 07 with the specified thickness and corner radius. Is the AH8015 grade suitable for interrupted cuts? AH8015 is balanced for general turning of heat‑resistant alloys and offers good edge stability, making it a viable choice for many interrupted‑cut situations provided cutting parameters and fixture rigidity are appropriate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070204 AH8015 Wendeplatten - Tungaloy
Combining PVD-coated AH8015 carbide with a rhombic 55° geometry delivers a balanced mix of wear resistance and edge stability ideal for turning operations; order the insert via Metav Werkzeuge or consult our application specialists for holder compatibility and optimisation. DPMT 070204 AH8015 — DPMT ISO turning insert for turning, Tungaloy The DPMT 070204 AH8015 is an ISO-standard rhombic turning insert designed for external and internal turning of heat‑resistant alloys, offering a compact geometry for precise, repeatable machining. PVD-coated AH8015 carbide for heat-resistant alloys Rhombic insert, size 07 with 55° cutting angle 0.4 mm corner radius for improved surface finish Single-sided chipbreaker with cylindrical hole Higher throughput with balanced wear and edge stability The PVD-coated grade AH8015 combines wear resistance and edge stability, making it particularly suited for machining heat‑resistant alloys where sustained cutting performance is required. The PVD-coated surface reduces adhesive wear and increases tool life under elevated temperatures. Selecting this grade contributes to fewer tool changes and steadier cycle times, supporting reliable production rates and predictable maintenance intervals. Geometry tuned for consistent surface quality and chip control The rhombic plate form with a 55° cutting angle and 0.4 mm corner radius delivers a compromise between strength and fine surface finish. A small corner radius helps maintain a sharp cutting edge for accurate profiles, while the single-sided chipbreaker manages swarf evacuation to reduce re-cutting and improve surface integrity. The insert’s cylindrical hole with a 40°–60° countersink ensures secure seating and consistent clamping force for repeatable results. ISO standardisation simplifies holder selection and system integration As an ISO-standard insert, compatibility with holders is determined by form, clearance angle, tolerance class, fastening, size and thickness—allowing straightforward integration into existing tool systems. The insert forms part of a system comprising a matching external holder or boring bar, a support pad or clamping kit, and replacement fastening screws. For many workshops, this standardisation reduces setup time and simplifies inventory management while maintaining process reliability. For machining heat‑resistant alloys, specify the Tungaloy DPMT 070204 AH8015 insert when ordering from Metav Werkzeuge or contact our application specialists at Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 for advice on holder compatibility and cutting‑parameter optimisation Technical data Article number: 6951346 Manufacturer SKU: TUN6951346 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.4 mm Cutting angle: 55° Clearance angle: 11° Plate thickness: 2.38 mm Plate size: 07 Special features PVD-coated carbide (AH8015) Rhombic plate form Single-sided chipbreaker Cylindrical hole with 40°–60° countersink ISO-standardised insert for external and internal turning Compatible with matching holder by form, clearance, tolerance, fastening, size and thickness FAQ Which materials are best machined with this insert? The DPMT 070204 AH8015 insert is optimised for heat‑resistant alloys thanks to the AH8015 grade and PVD-coated carbide construction, while still performing well on a broad range of alloyed steels. How does the 0.4 mm corner radius affect the surface finish? A 0.4 mm corner radius provides a compromise between edge strength and surface quality, improving finish compared with larger radii while maintaining adequate edge robustness for general turning operations. Will this insert fit existing holders? Compatibility depends on ISO form, clearance angle, tolerance class, fastening method, size and thickness; the ISO‑standardised design of this insert simplifies matching to compliant holders, but verification of holder specifications is recommended. What benefits does the single-sided chipbreaker provide? The single-sided chipbreaker improves chip formation and evacuation during turning, reducing the risk of re-cutting and helping to maintain consistent surface integrity on interrupted or continuous cuts. Can this insert be used for internal turning? Yes — the ISO geometry and compact rhombic form allow use in both external and internal turning applications provided a suitable boring bar or holder is selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070204 NS9530 Wendeplatten - Tungaloy
High-performance uncoated cermet finishing combined with a sharp cutting edge and an 11° clearance angle delivers low cutting forces and excellent surface quality; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. DPMT 070204 NS9530 — ISO turning indexable insert DPMT for precision finishing, by Tungaloy DPMT070204 NS9530 is an ISO-form indexable insert designed for precision external and internal turning, optimised for fine finishing of steel. ISO rhombic 07 format for standard turning Uncoated cermet NS9530 for fine finishing 11° clearance angle reduces cutting forces Cylindrical hole with countersink for secure clamping Precision finishing with an uncoated cermet grade The insert is manufactured as an ISO-compliant, rhombic 07 format designed specifically for turning operations that demand a high-quality surface finish. The NS9530 grade is an uncoated cermet developed for finishing steel with a sharp cutting edge, low cutting forces and consistent results during continuous cuts and modest depths of cut. For workshops seeking repeatable surface quality, the material choice reduces the tendency for built-up edge and supports predictable tool life, which translates into fewer interruptions and more stable processes. Secure clamping and geometric control for reliable performance The plate comes with a cylindrical hole and a one-sided countersink (40°–60°), enabling firm seating and repeatable positioning in compatible holders. The combination of 11° clearance and a 0.4 mm corner radius balances edge strength with the ability to produce fine finishes; the rhombic shape and 2.38 mm plate thickness ensure compatibility with a wide range of standard external holders. Compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness, so matching the insert geometry to the clamping system is essential for safe, productive turning. Application benefits and process advantages As a finishing grade for steel, the insert delivers low cutting forces and a refined surface appearance, making it suitable for continuous turning and small depth-of-cut operations. The single-sided chipbreaker supports controlled chip formation when paired with the right feed and speed, improving machine uptime and part quality. For process planners, the standardized ISO designation simplifies tool selection and inventory management, while the predictable behaviour of an uncoated cermet contributes to consistent cycle times and fewer in-process adjustments. Contact Metav Werkzeuge today for application guidance and to reserve the Tungaloy DPMT070204 NS9530 indexable insert for precision finishing Technical data Manufacturer article number: 6951347 SKU: 6951347-Tungaloy Manufacturer SKU: TUN6951347 Model series: ISO-Drehwendeschneidplatten Numbers / Facts ISO code: 070204 Plate size: 07 Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Insert angle: 55° Designs / Special features Uncoated cermet grade NS9530 Rhombic plate form DPMT With hole; cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Application: Turning Material base: Cemented carbide / cermet composite FAQ What material is the DPMT 070204 NS9530 suited for? The Tungaloy DPMT070204 NS9530 insert is formulated as a finishing grade for steel, offering a sharp cutting edge and stable performance on continuous finishes. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) on the DPMT 070204 insert ensures secure seating and repeatable positioning in compatible holders, improving clamping reliability. Which operations are recommended for this insert? This insert excels in external and internal finishing operations where low cutting forces and high surface quality are priorities; it is optimised for continuous cuts and small depths of cut. Is the cutting grade coated or uncoated? The NS9530 grade is an uncoated cermet, selected for its sharp edge and surface finish capability rather than for wear-resistant coatings. What geometrical data should be checked for holder compatibility? Check holder form, clearance angle (11°), tolerance class, fixing method, insert size (07) and plate thickness (2.38 mm) to ensure correct fit and secure clamping for the DPMT070204 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070204 NS9530 Wendeplatten - Tungaloy
Data error: conflicting material specifications detected (uncoated cermet vs cemented carbide). Product description could not be generated due to inconsistencies in the provided material data, which require further clarification or correction to ensure accurate representation of the product's characteristics, properties, and intended applications. This issue may stem from discrepancies in the input data sources or errors during the specification process, necessitating a thorough review to resolve the conflict and enable the generation of a precise and reliable product description that aligns with the expected standards and requirements for material classification and usage.
DPMT 070204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and reliable ISO compatibility to streamline turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DPMT 070204 NS9530 — Turning Insert (rhombic, 0.4 mm radius) by Tungaloy A DPMT070204 NS9530 turning insert designed for finishing operations in steel turning, providing a sharp cutting edge and low cutting forces for consistent surface quality Uncoated cermet NS9530 for fine finishing Rhombic shape with 0.4 mm corner radius 11° relief angle for low cutting forces Central hole with cylindrical countersink 40°–60° Consistent fine finishing with a cermet edge This grade is an uncoated cermet (NS9530) developed for finishing of steel, delivering a sharp cutting edge and reduced cutting forces. The microstructure of the cermet helps achieve a superior surface finish on continuous cuts and small depths of cut, which reduces subsequent dressing or polishing steps. The combination of a small 0.4 mm corner radius and the specified relief geometry supports accurate profile reproduction and predictable component tolerances, making the insert particularly suitable where dimensional fidelity and surface integrity are priorities. Secure clamping and ISO-standard compatibility for reliable set-up The insert conforms to ISO dimensions and is compatible with matching ISO toolholders when form, relief angle, tolerance class, fastening, size and thickness are respected. The rhombic plate form and a plate thickness of 2.38 mm contribute to stable seating, while the central hole with cylindrical bore and one-sided countersink (40°–60°) ensures repeatable clamping and correct axial positioning. These features reduce setup variation and enable faster changeovers in production environments that rely on standardised tooling systems. Productivity-focused design for finishing cycles Engineered as a finishing grade with a one-sided chipbreaker, this insert excels in continuous turning operations where small feeds and fine cuts are used. The low cutting forces associated with the geometry and cutting material lower machine load and can extend toolholder life, supporting higher effective productivity per tool. Typical uses include both external and internal turning where consistent surface quality and minimal burr formation are required. The system approach includes the ISO insert together with a compatible outer holder or boring bar, a backing pad/clamp set and spare screws for an efficient replacement workflow. For tailored application advice or to order the DPMT070204 NS9530 turning insert from Tungaloy, contact Metav Werkzeuge — technical consultants are available to recommend the ideal holder combination and process parameters for the intended turning task Technical data Article number: 6951281-Tungaloy Manufacturer SKU: TUN6951281 Manufacturer item number: 6951281 Brand: Tungaloy Numbers / Core technical data ISO designation: 070204 Size: 07 Corner radius: 0.4 mm Relief angle: 11° Included angle: 55° Plate thickness: 2.38 mm Designs / Special features Uncoated cermet cutting material (NS9530) Rhombic plate form One-sided chipbreaker Central hole with cylindrical bore + one-sided countersink (40°–60°) Intended application: turning (external and internal) Typical system: ISO insert, compatible external holder or boring bar, backing pad/clamp set and replacement screws FAQ What materials is this insert intended for? The DPMT070204 NS9530 is specified as a finishing grade for steel; the uncoated cermet substrate is optimised for continuous cuts and small depths of cut on steel components. Is the insert compatible with standard ISO holders? Yes — compliance with ISO dimensions means the insert fits ISO-compatible holders when form, relief angle, tolerance class, fastening method, size and thickness are matched. How does the small corner radius affect the result? A 0.4 mm corner radius delivers sharper profiles and improved surface quality for finishing passes while maintaining adequate strength for light interrupted cuts. What role does the countersunk central hole play? The central hole with a cylindrical bore and a 40°–60° countersink provides secure, repeatable clamping and correct axial orientation when used with matching screws and clamp sets. For which types of turning is the chipbreaker suited? The one-sided chipbreaker is designed for finishing applications where chip control supports stable, continuous cutting and consistent surface integrity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070204 T6215 Wendeplatten - Tungaloy
High wear resistance from the CVD-coated carbide grade and effective chip control combine to deliver stable turning of stainless steels; the ISO-form insert with a 0.4 mm corner radius and secure clamping design reduces downtime and tool change frequency. Order through Metav Werkzeuge or consult our application specialists for optimal holder pairing. DPMT 070204 T6215 – ISO turning insert by Tungaloy, CVD-coated carbide for stainless steels The DPMT070204 T6215 is an ISO rhombic turning insert designed for external and internal turning of stainless steels under stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 Optimised for stainless steels Rhombic ISO insert, 55° geometry Cylindrical hole with countersink Improved tool life through wear-resistant coating The DPMT070204 T6215 insert features a CVD-coated carbide substrate engineered for enhanced wear resistance when machining stainless steels. The chemical vapour deposition layer increases resistance to built-up edge and abrasion, which translates into a longer tool life and more consistent part quality over longer production runs. For operations that demand repeatable surface finish, the coated grade helps maintain cutting edge integrity, reducing the frequency of index changes and supporting predictable machining cycles. Secure clamping and geometrical stability for reliable turning The rhombic shape with a 55° main clearance and an 11° clearance angle offers a balance between access and stability in confined turning zones. The 0.4 mm corner radius and an insert thickness of 2.38 mm contribute to edge strength for light finishing and medium-turning tasks. A cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and repeatable seating in ISO-compatible toolholders; compatibility is determined by insert form, clearance, tolerance class, fastening and size. These geometric features reduce vibration and support steady cutting conditions, which benefits dimensional accuracy and surface quality. Consistent chip control and practical application guidance Equipped with a one-sided chipbreaker, this insert promotes reliable chip control during external and internal turning operations. For stainless steels, choosing the appropriate chipbreaker and matching the T6215 grade to the workpiece stability will improve evacuation and reduce recutting of chips. The insert is intended for use in both continuous and lightly interrupted cuts; selecting a suitably rigid holder and optimising feeds and speeds for the alloy and machining setup will preserve edge life and deliver stable process results. Clear chip management reduces downtime and supports safer, more efficient production. For tailored advice on integrating Tungaloy turning inserts into existing machining setups or to check availability, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will recommend the optimal insert and holder configuration for the application Technical data Article number: 6951344 Manufacturer SKU: TUN6951344 SKU: 6951344-Tungaloy Model series: ISO turning inserts ISO designation: DPMT070204 Manufacturer article number: 6951344 Facts Corner radius: 0.4 mm Insert thickness: 2.38 mm Main angle: 55° Clearance angle: 11° Insert size: 07 Special features Material: carbide Coating: CVD-coated Grade: T6215 Shape: rhombic Hole: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning (external and internal) Compatibility: ISO-standard insert fitting FAQ What materials is this insert suitable for? The DPMT070204 T6215 insert from Tungaloy is optimised for machining stainless steels under stable to lightly interrupted conditions, leveraging its CVD-coated carbide grade for improved wear resistance. Which toolholders are compatible with this insert? Compatibility depends on the ISO rhombic form, 55° geometry and the insert thickness; use ISO-compatible turning holders sized for DPMT070204 and ensure the holder accepts a cylindrical hole with countersink for secure clamping. What is the corner radius and what does it mean for machining? The corner radius is 0.4 mm, which offers a compromise between edge strength and the ability to achieve finer surface finishes; it is suitable for finishing and medium-turning in stainless steels. Is the insert coated and how does the coating help? Yes — the insert is CVD-coated carbide (grade T6215); the coating enhances resistance to abrasion and built-up edge, improving tool life and process stability when machining challenging alloys. Why is the hole style important for this insert? The cylindrical hole with a one-sided countersink (40°–60°) provides reproducible seating and stronger clamping in the toolholder, which reduces movement under cutting forces and supports consistent dimensional results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070204 T6215 Wendeplatten - Tungaloy
Take advantage of a wear-resistant CVD-coated carbide grade and an optimised rhombic geometry for stable, productive turning. The combination of T6215 performance and precise ISO form makes this insert suitable for consistent machining of stainless steel under stable to slightly interrupted conditions — order directly via Metav Werkzeuge or consult the team for application advice. DPMT 070204 T6215 ISO turning insert by Tungaloy — rhombic 55° geometry, CVD-coated carbide A DPMT 070204 T6215 insert designed for ISO-standard turning, optimised for machining stainless steel in stable to lightly interrupted cuts. CVD-coated carbide T6215 grade Rhombic 55° ISO geometry Cylindrical hole with countersink 0.4 mm corner radius Consistent performance thanks to a wear-resistant grade The T6215 CVD-coated carbide grade delivers stable cutting and extended tool life when machining stainless steel, reducing unplanned tool changes and downtime. The chemical vapour deposition coating improves wear resistance and protects the cutting edge against built-up edge formation, which is a common challenge when turning corrosion-resistant alloys. Selecting this grade translates into fewer interventions on the production line and a more predictable process window for series production. Geometry and clamping designed for secure, accurate turning The insert’s rhombic 55° ISO geometry and 11° clearance angle provide a reliable cutting orientation for both external and internal turning operations. The cylindrical hole with a single-sided countersink (40°–60°) ensures positive locating and repeatable clamping in standard ISO holders, which simplifies tool management across multi-shift operations. A 0.4 mm corner radius balances edge strength with achievable surface finish, offering an economical compromise between robustness and part quality. Practical advantages for workshop and production environments With a plate thickness of 2.38 mm and ISO designation DPMT070204, this rhombic insert integrates easily into established tool systems and spare-part inventories. The single-sided chipbreaker supports controllable chip formation under stable to slightly interrupted cutting, lowering the risk of chip entanglement and improving operator safety. For manufacturers aiming for consistent throughput and repeatable quality, the insert’s specification supports efficient process setup and straightforward integration. Application guidance and selection criteria The insert is intended for turning applications where material, stability and machining strategy match the tool’s capabilities. For best results on stainless steel, combine the insert with a rigid holder, appropriate cutting speed and controlled feed to avoid excessive strain on the cutting edge. The ISO-standard shape and hole style make it compatible with a wide range of external holders and boring bars; choose the chipbreaker and grade based on workpiece alloy and interrupt frequency to achieve optimal tool life and surface finish. For tailored advice or to secure delivery of the Tungaloy DPMT 070204 T6215 insert for your production needs, contact Metav Werkzeuge — technical consultants are available to assist with application parameters and stocking options. Technical data Article number: 6951274 Manufacturer article number: 6951274 SKU: 6951274-Tungaloy Manufacturer SKU: TUN6951274 Model series: ISO-Drehwendeschneidplatten Facts Geometry angle: 55° Clearance angle: 11° Thickness: 2.38 mm Corner radius: 0.4 mm Plate size: 07 Features CVD-coated carbide grade T6215 Rhombic plate form with cylindrical hole and countersink (40°–60°) Single-sided chipbreaker Suitable for turning stainless steel under stable to lightly interrupted conditions ISO-standard insert compatible with ISO external holders FAQ What materials is this insert suitable for? The DPMT 070204 T6215 insert is specified for machining stainless steel and similar corrosion-resistant alloys under stable to slightly interrupted cutting conditions. Which holders are compatible with this insert? Compatibility relies on ISO form, size and thickness; the rhombic DPMT 070204 fits ISO rhombic external holders and appropriate boring bars that accept 07-size inserts. How does the T6215 grade affect tool life? The T6215 CVD-coated carbide improves wear resistance and reduces edge degradation when turning stainless steel, resulting in longer tool life compared with uncoated grades. Is the insert suitable for interrupted cuts? The insert is intended for stable to lightly interrupted conditions; for heavy interruptions a more robust grade or larger corner radius may be required. What chip control can be expected? The single-sided chipbreaker produces predictable chip formation in typical turning parameters for stainless steel, aiding evacuation and reducing the risk of chip entanglement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070204 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T6215 for extended tool life and reliable machining of stainless steels, combined with the rhombic DPMT070204 geometry and a 0.4 mm corner radius for consistent surface quality; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. DPMT070204 T6215 turning insert — Tungaloy The DPMT070204 is an ISO-format rhombic turning insert designed for stable external and internal turning of stainless steels, featuring a CVD-coated carbide grade for wear resistance and an integrated one-sided chipbreaker. CVD-coated carbide for long tool life Optimised for stainless steels machining Rhombic 07 form with 0.4 mm corner radius One-sided chipbreaker, ISO-standard compatibility Performance that keeps production moving The CVD-coated carbide grade T6215 provides a combination of wear resistance and toughness that suits turning of stainless steels under stable to lightly interrupted cutting conditions. The coating is designed to reduce flank and crater wear, which extends tool life and minimises unscheduled tool changes. As a result, machining cycles remain predictable and throughput is improved, while the balanced substrate helps to maintain a consistent cutting edge geometry across runs. Simple compatibility with ISO tool systems Compatibility with holding systems is governed by the insert form, clearance angle, tolerance class, attachment method, overall size and thickness. The insert is ISO-standard and integrates with matching external holders or boring bars when these parameters align. The system typically comprises the ISO insert, an appropriate holder, a shim or clamp set and replacement screws, ensuring that the component can be fitted into existing setups without special adapters and that clamping forces remain consistent for stable cutting. Practical handling and machining advice The one-sided chipbreaker on this rhombic geometry supports controlled chip formation when paired with the correct feed and depth of cut, reducing built-up edge on stainless steels. The corner radius of 0.4 mm is a compromise between edge strength and surface finish: it improves edge durability while still allowing a fine surface if cutting data is kept conservative. The specified clearance angle of 11° helps to avoid rubbing on the flank face, particularly important when machining tough or gummy alloys. Where this insert delivers most value Designed for general turning tasks, the insert excels in external and internal operations where reliable chip control and tool life are priorities. Its rhombic 07 shape and centred hole with a cylindrical bore and single-side countersink (40°–60°) facilitate secure seating and repeatable indexability. For routine production, choose the DPMT070204 in combination with a rigid holder and stable workpiece set-up to exploit the grade’s wear resistance and the chipbreaker’s efficiency. For order placement or application consultation regarding the Tungaloy T6215 grade, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the optimal configuration for specific stainless steel turning tasks Technical Data Article number: 6945265 Manufacturer SKU: TUN6945265 SKU: 6945265-Tungaloy Model series: ISO turning inserts Designation: DPMT070204 Material: Carbide Facts Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 2.38 mm Size: 07 Geometry angle: 55° Special features CVD-coated carbide (T6215) One-sided chipbreaker Rhombic plate form With hole: cylindrical hole + single-side countersink (40°–60°) ISO-compatible turning insert Suitable for turning stainless steels System composition: insert, holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited to machine? The insert is intended primarily for stainless steels; the T6215 CVD-coated carbide provides wear resistance and stability for these alloys under steady to lightly interrupted cutting. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius increases edge strength compared with minimal radii and supports better tool life while still permitting a good surface finish when cutting parameters are adapted to the workpiece. Is the insert compatible with common ISO holders? Yes, the insert follows ISO form and will fit holders that match its form, size, tolerance and attachment method; secure seating is achieved using the cylindrical hole with single-side countersink. Which chipbreaker should be selected for heavy feeds? The one-sided chipbreaker on this insert is optimised for controlled chips in many turning scenarios; for heavy feeds or severe interruptions, a chipbreaker and grade selected for higher stability are recommended. Can this insert be used for internal turning? The geometry and hole location support both external and internal turning applications when paired with appropriate holders and rigid machining set-up. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070204 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade tailored for the machining of medium steels, combined with a compact rhombic 07 geometry and a 0.4 mm corner radius for predictable tool life and process stability. Order the DPMT070204 directly via Metav Werkzeuge or consult their technical advisers for selection support. DPMT070204 T9215 DPMT ISO turning insert — Tungaloy A DPMT070204 T9215 ISO turning insert designed for external and internal turning, offering high wear resistance and reliable performance in continuous to lightly interrupted cuts. CVD-coated carbide for excellent wear resistance Optimised for medium steel machining Rhombic 07 form with 0.4 mm corner radius Single-sided chipbreaker for controlled chips Higher productivity through wear-resistant CVD coating The CVD-coated carbide grade T9215 combines elevated wear resistance with good fracture toughness, making it a dependable choice for medium steel operations. The chemical vapour deposition (CVD) layer provides a hard, adherent surface that reduces flank and crater wear, which in turn prolongs service intervals and supports higher material removal rates. This results in improved process reliability and consistent component quality when the application demands sustained performance. Predictable cutting behaviour thanks to geometry and chip control The rhombic 07 form and 0.4 mm corner radius produce a balance between edge strength and finishing capability, while the single-sided chipbreaker ensures consistent chip formation under a variety of cutting conditions. The insert’s 11° relief gives the necessary clearance to avoid rubbing, and the central cylindrical hole with one-sided countersink secures stable clamping in compliant ISO holders. These geometrical features contribute to stable cutting forces and reduced vibration, which benefits surface finish and tool life. Clear compatibility and practical application guidance Supplied as an ISO-standard insert, compatibility with the toolholder depends on the insert form, relief angle, tolerance class, clamping method, size and thickness. The insert is intended for turning of medium steels in external and internal operations and is suited to continuous to slightly interrupted cuts. For system setup, pair the insert with a suitable external holder or boring bar, plus the appropriate shim/clamp set and replacement fixing screws to ensure correct seating and repeatable positioning. Contact Metav Werkzeuge for tailored application advice and to order the Tungaloy DPMT070204 T9215 insert directly via Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 for assistance Technical Data Article number: 6951342 SKU (manufacturer): TUN6951342 SKU (retailer): 6951342-Tungaloy Model series: ISO turning inserts Data Insert designation: DPMT070204 Size: 07 Corner radius: 0.4 mm Relief angle: 11° Included hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Insert thickness: 2.38 mm Main angle: 55° Special features Grade / coating: T9215, CVD-coated carbide Geometry: rhombic Chipbreaker: single-sided Application: turning (external and internal) Typical setup: insert + outer holder or boring bar + shim/clamp set + replacement screws FAQ What materials is this insert best suited for? The DPMT070204 T9215 insert is optimised for medium steel machining and provides a good balance between wear resistance and fracture toughness for continuous to slightly interrupted cuts. How does the T9215 coating improve performance? The CVD-coated T9215 grade offers a hard, wear-resistant layer that reduces flank and crater wear, extending tool life and supporting stable cutting conditions for the DPMT070204 insert. Is the geometry compatible with standard ISO holders? Compatibility is determined by insert form, relief angle, tolerance class, clamping and size; the DPMT070204 follows ISO conventions and fits holders designed for rhombic 07 inserts with the matching clamping arrangement. What clamping features does the insert provide? The insert includes a central cylindrical hole with a one-sided countersink (40°–60°), enabling secure seating and repeatable clamping in compatible toolholders. Can this insert handle interrupted cuts? Yes, the DPMT070204 with T9215 grade is suitable for continuous to lightly interrupted cuts; heavier interruptions may require a different geometry or grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070204 T9215 Wendeplatten - Tungaloy
Achieve higher productivity and consistent tool life with the CVD‑coated T9215 grade and the 0.4 mm corner radius in a compact rhombic geometry; order the inserts directly via Metav Werkzeuge or request consultancy for process-specific recommendations. DPMT070204 T9215 ISO turning insert for turning applications — Tungaloy The DPMT070204 T9215 is an ISO‑standard indexable turning insert designed for external and internal turning of steel, combining a CVD‑coated carbide grade with a single‑sided chipbreaker for reliable mid‑range machining. CVD-coated carbide for mid-range steel machining Rhombic insert, 55° included angle 11° relief angle for stable cutting Cylindrical hole with 40°–60° countersink Boosted productivity through wear‑resistant coating and grade selection The CVD‑coating and carbide substrate of this insert deliver a balance of wear resistance and fracture toughness that supports higher machining speeds and longer tool life in medium steel applications. Selecting the T9215 grade means prioritising consistent edge integrity when moving from continuous to lightly interrupted cuts, which reduces unplanned tool changes and improves overall throughput. The result is measurable process stability in repeated production runs while preserving surface quality. Stable cutting geometry for predictable results and easier setup A rhombic profile with a 55° included angle and an 11° relief angle provides a versatile geometry that suits a range of turning tasks, from general finishing to semi‑roughing. The compact form and specified thickness (2.38 mm) simplify insert seating and clamping; the cylindrical hole with a one‑sided countersink (40°–60°) ensures secure fastening and repeatable positioning. These geometric choices reduce vibration and help maintain dimensional accuracy on the workpiece. Controlled chip formation and improved surface finish The single‑sided chipbreaker is tuned for medium steel and delivers consistent chip control under steady cutting conditions, which supports stable coolant flow and keeps the cutting zone clear. Better chip evacuation combined with the insert’s edge preparation results in improved surface finish and reduced secondary burr formation, limiting downstream deburring work and contributing to higher first‑pass quality rates. Practical system guidance for tool selection and compatibility This insert is part of an ISO indexable system: choose a compatible holder that matches the insert’s form, relief, tolerance class, fastening style, size and thickness to achieve the intended performance. Where stability is limited, opt for a chipbreaker and grade suited to interrupted cuts; for continuous cuts the standard T9215 compound provides excellent balance. For process optimisation and tooling packs, rely on application data sheets or consult product specialists to match insert, holder and cutting parameters precisely for each machining task. Contact Metav Werkzeuge for application advice, availability and to secure the DPMT070204 T9215 inserts for reliable production — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: 6951270 Manufacturer SKU: TUN6951270 SKU: 6951270-Tungaloy ISO designation: DPMT070204 Facts Size: 07 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 55° Hole style: Cylindrical hole + one‑sided countersink (40°–60°) Special features CVD‑coated carbide (T9215) Single‑sided chipbreaker Rhombic plate form ISO‑standard indexable turning insert Compatible with appropriate external holders and boring bars Designed for external and internal turning of steel FAQ What materials is this insert best suited for? The DPMT070204 T9215 insert from Tungaloy is optimised for medium steel machining using the CVD‑coated carbide grade T9215 and is intended for continuous to lightly interrupted cuts. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief, tolerance class, fastening, size and thickness; select a holder rated for ISO DPMT‑style inserts and match the 07 size and 2.38 mm thickness for correct seating. How does the T9215 grade influence cutting performance? T9215 offers a combination of wear resistance and toughness that supports higher productivity with consistent edge life in mid‑range steel applications, reducing the frequency of insert changes. Can this insert be used for internal turning? Yes, the ISO‑standard geometry and compact rhombic form make the insert suitable for both external and internal turning operations when paired with the correct boring bar or internal holder. What chip control can be expected with the single‑sided chipbreaker? The single‑sided chipbreaker provides reliable chip formation in steady cutting conditions, improving evacuation and contributing to better surface quality on the finished part. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DPMT 070204 T9215 Wendeplatten - Tungaloy
Combining CVD-coated T9215 and a 0.4 mm corner radius provides high wear resistance and reliable edge integrity for productive turning of medium steel; the ISO rhombic form and secure hole/countersink ensure consistent clamping. Order the DPMT070204 T9215 insert via Metav Werkzeuge or consult their advisers for grade and chipbreaker selection. DPMT 070204 T9215 — ISO turning insert for turning, Tungaloy The DPMT070204 T9215 is an ISO rhombic turning insert designed for medium steel machining, offering a balanced combination of wear resistance and fracture safety CVD-coated cemented carbide T9215 Optimised for medium steel machining Rhombic 07 form with 11° relief 0.4 mm corner radius with fixing hole Higher throughput through a wear-resistant grade The CVD-coated cemented carbide grade T9215 is formulated to combine wear resistance with good breakage safety, making it suitable for production-oriented turning operations. As a grade intended for continuous to light interrupted cuts, it supports stable tool life and fewer insert changes, which directly reduces machine downtime. Specifying this grade encourages predictable performance when machining medium steels under stable cutting conditions. Accurate geometry for repeatable surface quality The rhombic 07 geometry with a 55° included angle and 11° clearance provides a reliable cutting edge orientation for versatile external and internal turning tasks. The 0.4 mm corner radius helps achieve a balance between edge strength and surface finish, while the plate thickness 2.38 mm contributes to consistent rigidity in the tool system. The insert’s central hole with a cylindrical bore and one-sided countersink (40°–60°) ensures secure clamping and repeatable positioning in standard ISO-compatible holders. System compatibility that simplifies tooling decisions Being part of the ISO turning insert series, the plate is intended to work within a system comprising a matching external holder or boring bar, a support shim/clamp set and replacement screws. Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; this simplifies selection once the holder interface is known. Using standardised ISO geometry reduces inventory complexity and streamlines changeovers in batch production. Better chip control and application guidance The one-sided chipbreaker geometry is matched to the grade and the target material to promote effective chip formation and evacuation during turning of medium steels. For productive machining, pairing the insert with a holder that provides sufficient rigidity and damping is recommended; choose a chipbreaker and feed appropriate for the workpiece stability. When interruptions or heavier cuts are expected, select a setup with enhanced support or a more robust grade to maintain edge integrity. For specification advice or to secure DPMT070204 T9215 inserts from Tungaloy, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com; their advisers can recommend the ideal grade, chipbreaker and holder combination for the application Technical data Article number: 6945263 SKU: 6945263-Tungaloy Manufacturer SKU: TUN6945263 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Facts Thickness: 2.38 mm Corner radius: 0.4 mm Relief/clearance angle: 11° Included angle: 55° Plate size: 07 Special features CVD-coated grade T9215 Rhombic form (DPMT) One-sided chipbreaker With hole; cylindrical hole + one-sided countersink (40°–60°) Intended application: turning (external and internal) System components: matching outer holder or boring bar, support shim/clamp set, replacement screws FAQ What materials is this insert designed for? The DPMT070204 T9215 insert from Tungaloy is optimised for medium steel machining and combines wear resistance with fracture safety for continuous to light interrupted cuts. Which holder characteristics must be matched for correct clamping? Compatibility depends on insert form, clearance angle, tolerance class, fastening, size and thickness; the DPMT070204 requires an ISO-compatible holder that accepts rhombic 07 plates with a 2.38 mm thickness and central fixing hole. Is the T9215 grade suitable for interrupted cuts? T9215 is specified for continuous to light interrupted cutting; for heavy interruptions a more robust setup or alternative grade may be preferable. What fixing details are required for the insert? The insert features a central cylindrical hole with a one-sided countersink (40°–60°); matching clamp and screw geometry in the holder are required for secure fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070204 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a robust CVD-coated carbide grade, precise 55° rhombic geometry and proven compatibility with ISO holders to maintain stable chip control and longer tool life in medium to heavy steel turning. Order through Metav Werkzeuge or consult our specialists for tailored selection and supply. DPMT070204 T9225 Tungaloy — indexable turning insert for medium to heavy steel, CVD-coated carbide A DPMT070204 T9225 indexable insert engineered for general turning, providing a robust CVD-coated carbide grade that copes well with interrupted cuts and changing engagement conditions. DPMT070204 T9225 indexable insert, CVD-coated 55° rhombic geometry with 11° clearance angle Designed for medium to heavy steel turning Cylindrical hole with single-sided countersink 40°–60° Stable cutting performance for demanding turning tasks The CVD-coated carbide grade T9225 delivers a balance of wear resistance and toughness that suits medium to heavy steel machining. The coating increases thermal stability and reduces flank wear, which translates into longer tool life and fewer indexings. In practical terms, this means fewer setup changes and improved process consistency when cutting under variable engagement or with slight interruptions. The robust nature of the grade supports reliable dimensional results and repeatable component quality in production environments. Secure clamping and consistent chip control The 55° rhombic geometry combined with an 11° clearance angle and a corner radius of 0.4 mm ensures stable contact between insert and workpiece, reducing vibration and promoting consistent chip formation. The insert's cylindrical hole with a single-sided countersink (40°–60°) provides positive seating in ISO-compatible holders; compatibility depends on form, clearance, tolerance class, fastening, size and thickness. A plate thickness of 2.38 mm and standard size 07 contribute to stiffness at the cutting edge, which helps maintain surface finish and dimensional accuracy under increased cutting forces. Practical application guidance and material suitability This indexable insert is intended for external and internal turning where a universal, robust solution is required. The one-sided chipbreaker and T9225 grade excel when steel workpieces present moderate to heavy machining demands or intermittent cuts; select matching chipbreaker and holder stability for optimal results. For less familiar setups, the combination of ISO standard form and the insert’s universal character simplifies holder selection and reduces setup uncertainty. If further machining parameters or comparisons with alternative grades are required, technical advice is available to align the right chipbreaker, feed and cutting speed with production goals. Contact Metav Werkzeuge for expert advice on Tungaloy turning solutions and to secure supplies of the DPMT070204 T9225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951343 SKU: 6951343-Tungaloy Manufacturer SKU: TUN6951343 Model series: ISO indexable turning inserts Material: carbide Facts Corner radius: 0.4 mm Geometry angle: 55° Clearance angle: 11° Plate thickness: 2.38 mm Size: 07 Special features Grade: T9225 (CVD-coated carbide) Single-sided chipbreaker Rhombic plate form Cylindrical hole with single-sided countersink (40°–60°) Application: external and internal turning Suited for medium to heavy steel machining ISO-standardised compatibility with holders FAQ What materials is this insert suitable for? The DPMT070204 T9225 insert is formulated for medium to heavy steel machining; the T9225 CVD-coated carbide grade handles variable engagement and interrupted cuts effectively. How does the 55° rhombic geometry affect performance? A 55° rhombic shape provides a versatile cutting angle for turning; the geometry of the DPMT070204 helps balance cutting forces and surface finish when used with appropriate holders and feeds. Is the insert compatible with standard ISO holders? Compatibility is determined by form, clearance, tolerance class, fastening, size and thickness; the DPMT070204 follows ISO plate standards and fits holders matching those parameters. What benefits does the CVD coating bring to this grade? The CVD coating on the T9225 grade increases thermal stability and wear resistance, resulting in extended tool life and more consistent component quality under demanding turning conditions. Which chipbreaker should be chosen for interrupted cuts? For interrupted or variable engagement, select a robust chipbreaker matched to the T9225 grade and the intended feed; the one-sided chipbreaker on this insert supports controlled chips in heavier turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070204 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide endurance, a robust universal T9225 grade and precise ISO geometry for consistent medium-to-heavy steel turning; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. DPMT070204 T9225 Tungaloy — ISO rhombic turning insert for medium to heavy steel turning The DPMT070204 T9225 Tungaloy is an ISO-standard rhombic turning insert designed for external and internal turning in varying engagement conditions, delivering toughness and stable chip formation for interrupted or heavy cuts. ISO rhombic insert DPMT070204 CVD-coated carbide grade T9225 One-sided chipbreaker for steels 11° clearance; 0.4 mm corner radius Durable grade and coating for consistent cutting performance The combination of a CVD-coated surface and a carbide substrate in T9225 provides a balance of wear resistance and toughness tailored to medium to heavy steel machining. This grade is formulated for stable chip formation and reduced flank wear under changing engagement and light interruptions; as a result, tool life and process reliability are improved. The coating reduces built-up edge and increases resistance to abrasive and adhesive wear, which translates into fewer tool changes and steadier dimensional results over a production run. ISO compatibility and mounting details that support process reliability Designed to the ISO profile DPMT070204, the insert is compatible with holders that match the form, clearance angle, tolerance class, fastening, size and thickness specified for this geometry. Key geometry values include an 11° clearance, a 0.4 mm corner radius and a plate thickness of 2.38 mm, with a rhombic 07 shape and a lead angle of 55°. The insert is supplied with hole (cylindrical hole plus single-sided countersink 40°–60°) to suit standard clamping systems. For stable clamping and repeatable positioning, combine the insert with the correct external holder or boring bar, plus the appropriate shim, clamp set and replacement screws. Practical application and productivity benefits in turning operations Suited for both external and internal turning, the insert’s one-sided chipbreaker promotes controlled chips when machining steel, easing chip flow and reducing the risk of entanglement in automated or manual setups. In practice, this means fewer interruptions, more consistent surface finish and higher net productivity per insert life. The grade’s robustness is particularly effective where variable cutting conditions occur — such as step changes, interruptions or semi-roughing passes — delivering a dependable compromise between wear resistance and edge stability. Choose the DPMT070204 T9225 Tungaloy insert for reliable medium-to-heavy steel turning and contact Metav Werkzeuge for availability and tailored application advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6781351 SKU: 6781351-Tungaloy Manufacturer SKU: TUN6781351 Model series: ISO-Drehwendeschneidplatten Label: DPMT070204 T9225 Tungaloy-Wendeplatte Facts Corner radius: 0.4 mm Clearance angle: 11° Insert size: 07 Plate thickness: 2.38 mm Lead/approach angle: 55° Special features Material: carbide Coating: CVD Grade: T9225 (robust universal grade) Insert form: rhombic, DPMT070204 Chipbreaker: one-sided Hole: cylindrical hole with single-sided countersink (40°–60°) Typical application: turning (external and internal) System components: compatible holder, shim/clamp set, replacement screws FAQ Is this insert suitable for interrupted cuts in steel? Yes. The T9225 grade with CVD-coated carbide backing is designed for robustness in medium-to-heavy steel turning and offers improved toughness for lightly interrupted cutting conditions. What holders are compatible with this insert? Compatibility is determined by the ISO form, clearance angle, tolerance class, fastening, size and thickness; the DPMT070204 geometry fits standard ISO rhombic external holders and boring bars when those parameters match. Which materials can be machined with this grade? This insert is optimised for steel machining, particularly medium to heavy-duty operations where a balance of wear resistance and edge stability is required. How does the chipbreaker affect productivity? The one-sided chipbreaker promotes controlled chip formation during turning, reducing chip issues, improving surface finish consistency and enabling longer uninterrupted production cycles. Are replacement screws and clamping parts required? For secure and repeatable clamping, the insert is intended to be used with a matching shim/clamp set and replacement screws as part of the standard system assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070204 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide T9225 grade and a rhombic 07 form that deliver stable chip control and extended edge life for medium-to-heavy steel turning; the ISO compatibility and 11° clearance ensure straightforward integration into standard holders. Order or request consultation through Metav Werkzeuge for fast availability and machining advice. DPMT 070204 T9225 — DPMT turning insert by Tungaloy, rhombic 07 with 11° clearance DPMT070204 T9225 is a precision ISO turning insert for external and internal turning, designed for robust medium-to-heavy steel machining with a CVD-coated carbide grade. ISO rhombic 07 form for versatile turning CVD-coated carbide T9225 for robust performance Single-sided chipbreaker for stable chip formation 11° clearance and 0.4 mm corner radius for reliable finishes Consistent performance under variable cutting conditions The combination of CVD-coated carbide and the T9225 grade provides a balance of toughness and wear resistance that is particularly advantageous when cutting steel under changing entry conditions or with slight interruptions. The indexable insert resists thermal and mechanical wear, which reduces the frequency of tool changes and supports a more predictable production rhythm. By choosing this grade, machining programmes benefit from extended edge life and steadier material removal rates, contributing to improved throughput and lower process variability. Fast, ISO-compliant integration into existing tool systems Designed to ISO dimensions, this rhombic insert guarantees compatibility with holders when matched by form, 11° clearance, tolerance class, fastening method, size and thickness. The standardised geometry simplifies setup: the insert seats securely, clamping forces remain predictable and assembly time is minimised. The straightforward system layout—ISO insert, appropriate external holder or boring bar, shim and replacement screws—reduces downtime and engineering adjustments when introducing the grade into a production line. Controlled chips and surface quality for dependable results The single-sided chipbreaker and the insert’s geometry—with a 0.4 mm corner radius and 2.38 mm thickness—are tuned to encourage stable chip formation and decreased vibration. The result is improved surface integrity and fewer interruptions for chip evacuation. In practice, this means higher process security for series production and better repeatability on turned components, particularly in medium-to-heavy steel applications where chip control and edge robustness are decisive for cycle-time consistency. For dependable steel turning with the T9225 CVD-coated grade, contact Metav Werkzeuge for technical advice and immediate availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951272 Manufacturer SKU: TUN6951272 SKU: 6951272-Tungaloy Designation: DPMT070204 Brand: Tungaloy Facts Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 2.38 mm Size: 07 Included angle: 55° Special features CVD-coated carbide grade T9225 Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Suitable for turning (external and internal) System components: ISO insert, holder/boring bar, shim, clamping screws Model series: ISO turning indexable inserts FAQ Which materials is this insert best suited for? This insert, DPMT070204 T9225, is optimised for medium-to-heavy steel machining and performs well under changing cutting conditions or slightly interrupted cuts thanks to the robust CVD-coated carbide grade. Will the insert fit existing ISO holders? Yes. Compatibility depends on matching the rhombic form, 11° clearance, tolerance class, fastening method, size 07 and 2.38 mm thickness; when these parameters match, the insert seats and clamps reliably. How does the chipbreaker affect machining? The single-sided chipbreaker encourages stable chip formation and reduces the risk of snarled chips, improving surface finish and helping to maintain consistent cutting forces during turning operations. What cutting applications are recommended for this grade? Use the insert for external and internal turning in medium-to-heavy steel applications where robustness and stable edge life are required; the T9225 grade suits variable engagement and slightly interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070208 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, stable cutting edge and ISO‑standard geometry for reliable turning of stainless steels; the AH6225 PVD‑coated carbide grade and 0.8 mm corner radius deliver consistent performance in medium machining conditions. Order the insert directly via Metav Werkzeuge or ask our consultants for application advice. DPMT 070208 AH6225 ISO turning insert for external and internal turning — Tungaloy The DPMT 070208 AH6225 is an ISO‑standard rhombic turning insert designed for external and internal turning of stainless steels, offering a balanced mix of sharpness and edge stability for varying cutting conditions. PVD-coated carbide AH6225 for stainless steel 0.8 mm corner radius for stable cutting ISO DPMT 070208 form for holder compatibility Improve process stability with a universal cutting grade The PVD‑coated AH6225 grade is formulated as a universal option for machining stainless steels, combining a sharp cutting edge with robust wear resistance. In practice, this means a lower risk of built‑up edge and more predictable tool life when switching between batches or tolerances. Because the grade balances edge sharpness and toughness, it is particularly suitable for medium cutting parameters and mixed production runs where consistent component quality matters. The coating increases resistance to adhesive wear and heat, supporting higher productivity without sacrificing surface finish. Precise geometry for repeatable results The rhombic insert geometry with a 55° included angle and a 0.8 mm corner radius gives a reliable contact area and controlled force distribution during cuts. A relief angle of 11° helps to reduce rubbing while the 2.38 mm thickness ensures mechanical stability in the clamping. The insert features a cylindrical hole with a one‑sided countersink (40°–60°) for secure fixation in standard ISO holders; compatibility is determined by form, relief angle, tolerance class, attachment method, size and thickness. Using ISO‑conforming inserts simplifies inventory and enables predictable seating in a wide range of external and internal turning holders. Practical application and system compatibility Designed for indexable turning systems, the insert integrates with a suitable external holder or boring bar together with the correct shim and clamping screws to form a complete cutting system. The one‑sided chipbreaker supports effective chip control when paired with appropriate feeds and depths of cut; selecting the chipbreaker and grade to match material, rigidity and machining strategy reduces cycle times and scrap. For shops seeking quick conversion between operations, the ISO form and standardised mounting ensure fast, repeatable insert changes and consistent component quality across shifts. Contact Metav Werkzeuge for tailored application support and to order the Tungaloy DPMT 070208 AH6225 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951352 Manufacturer SKU: TUN6951352 SKU: 6951352-Tungaloy Model series: ISO turning indexable inserts Designation: DPMT070208 AH6225 Core specifications Corner radius: 0.8 mm Relief angle: 11° Insert angle: 55° Thickness: 2.38 mm Size: 07 Materials & features Grade / coating: AH6225, PVD‑coated cemented carbide Shape: Rhombic insert (DPMT) Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ Which materials is the insert suited for? The DPMT 070208 AH6225 turning insert from Tungaloy is specified for machining stainless steels and offers a universal balance of edge sharpness and toughness for medium cutting conditions. Can this insert be used for both external and internal turning? Yes, the ISO rhombic geometry and clamping hole make the insert compatible with standard external holders and boring bars for internal turning when mounted with the correct holder and shim. What does the AH6225 grade offer compared with other grades? The AH6225 PVD‑coated cemented carbide provides improved resistance to adhesive wear and thermal loads while preserving a relatively sharp cutting edge, which supports stable performance across varying stainless steel batches. How does the insert secure in the holder? Fixation is achieved via the central cylindrical hole with a one‑sided countersink; compatibility depends on matching form, relief, tolerance class, attachment method, size and thickness to the chosen ISO holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
DPMT 070208 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 grade, rhombic 07 geometry and a 0.8 mm nose radius for stable, repeatable turning in stainless steels; order the insert directly via Metav Werkzeuge or consult our technical team for tailored machining advice. DPMT 070208 AH6225 indexable turning insert for turning, Tungaloy — rhombic, 11° clearance DPMT070208 AH6225 is a compact ISO-format indexable insert designed for external and internal turning of stainless steels, offering a sharp yet robust cutting edge and predictable compatibility with ISO holders. DPMT070208 geometry, rhombic 07 size PVD-coated AH6225 for stainless steel 11° clearance angle for stable cutting Cylindrical hole with 40°–60° countersink Consistent edge life and material versatility for stainless-steel turning The PVD-coated AH6225 grade is engineered as a universal carbide for stainless steel machining, combining a fine, wear-resistant coating with a substrate that supports a sharp, stable cutting edge under variable conditions. This results in consistent tool life and fewer unexpected interruptions in batch production. The insert’s composition makes it suitable for medium cutting applications where a balance of edge retention and toughness reduces regrind frequency and improves overall process economy. Predictable fit and secure clamping for reliable tool changes Designed to the ISO turning insert system, the geometry, clearance angle and dimensional tolerances of this insert determine holder compatibility. The rhombic 07 format and 11° clearance mean that common external holders and boring bars accept the piece without modification, minimising set-up time. The insert’s cylindrical hole with a single-sided countersink (40°–60°) ensures repeatable clamping force and positional stability, which reduces chatter and improves surface consistency after each index or replacement. Better chip control and effective cutting performance A single-sided chipbreaker matched to the AH6225 grade assists in forming controllable chips during interrupted or steady cuts, helping to avoid long, stringy swarf that can damage the workpiece or tool. The 0.8 mm nose radius and the insert’s approach geometry contribute to a good surface finish while maintaining adequate strength at the cutting edge. For machinists new to the grade, the combination of chipbreaker and PVD coating translates into fewer tool changes and more predictable cycle times on stainless-steel components. Practical dimensions and shop-floor integration for immediate use With a thickness of 2.38 mm and the ISO 07 size, the insert integrates into standard inventories and is easy to store alongside compatible underplates and clamping sets. The modest profile reduces interference in tight bores while the rhombic outline gives flexibility for multiple cutting positions per insert. When selecting the chipbreaker and holder, match the insert’s form, free angle, size and thickness to the tooling system to make the most of its productive capabilities; this approach supports high machine uptime and repeatable part quality. For machining enquiries or to request a supply of the AH6225 DPMT070208 insert from Tungaloy, contact Metav Werkzeuge for specification support and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6947705 Manufacturer SKU: TUN6947705 Series: ISO-Drehwendeschneidplatten Facts Shape: rhombic (07) Thickness: 2.38 mm Clearance angle: 11° Approach/lead angle: 55° Nose radius: 0.8 mm Special features Grade/coating: AH6225 (PVD-coated carbide) Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Material: carbide FAQ What materials is this insert intended for? The AH6225-grade insert is formulated for stainless steel machining and performs well in medium cutting operations on such materials. How does the insert secure in the holder? The insert uses a cylindrical hole with a 40°–60° countersink, providing repeatable clamping and positional stability in compatible ISO holders. Which geometric features improve surface finish? The 0.8 mm nose radius and rhombic 07 form contribute to improved surface finish while maintaining edge strength for reliable results. Is this insert compatible with standard ISO turn holders? Yes; the insert follows ISO dimensions for turning inserts, and compatibility is determined by shape, free angle, tolerance class, fastening, size and thickness. What is the product identification for ordering? Order using article number 6947705 or manufacturer SKU TUN6947705 for the DPMT070208 AH6225 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
DPMT 070208 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated AH6225 carbide grade and a 0.8 mm corner radius for a sharp, reliable cutting edge when machining stainless steel; the rhombic geometry and 55° cutting angle ensure versatility across external and internal turning operations. Order the DPMT070208 insert via Metav Werkzeuge or consult technical advisors for holder compatibility and process setup. DPMT070208 AH6225 ISO turning insert, PVD‑coated carbide, 55° — Tungaloy A DPMT070208 AH6225 ISO‑standard rhombic turning insert designed for external and internal turning, combining a sharp yet stable cutting edge with universal performance on stainless steel. PVD‑coated carbide AH6225 Rhombic 07 geometry, 55° cutting angle 0.8 mm corner radius for edge stability Single‑sided chipbreaker, hole with countersink Consistent results on stainless steel with a universal grade The AH6225 grade is a PVD‑coated carbide developed as a universal solution for stainless steel machining. Its substrate and coating combination provides a sharp and stable cutting edge that copes well with medium‑duty cuts and varying conditions, reducing surface defects and improving process repeatability. As a consequence, scrap rates fall and cycle time variability is reduced, delivering measurable gains in production efficiency. Geometry tuned for flexible turning and edge strength With a rhombic 07 shape and a 55° cutting angle, the geometry offers a balance between access and mechanical strength. The 0.8 mm corner radius increases edge robustness without sacrificing form accuracy, while the 11° relief and 2.38 mm plate thickness support controlled cutting forces. This combination enables reliable external and internal turning where a compromise between finishing capability and tool life is required. Predictable chip formation and secure clamping for uptime The insert features a single‑sided chipbreaker and a cylindrical hole with one‑sided countersink (40°–60°) that promote consistent chip control under many conditions. The ISO‑standard layout simplifies replacement: the system consists of the insert, a matching holder or boring bar, a backing/ clamp set and replacement screws; holder compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness. Improved chip flow and dependable clamping reduce unplanned stops and make maintenance intervals more predictable. Practical advantages for daily production and set‑up As an ISO‑standard indexable insert, this grade supports quick changeover and straightforward inventory management. The combination of PVD coating, stable edge geometry and standardised form enables scalable productivity gains across mixed production runs. For technical clarification on holder matches or cutting data, the technical team can provide machining recommendations to help integrate the insert into existing tool systems. Contact Metav Werkzeuge for tailored advice on Tungaloy turning inserts and compatibility with existing holders — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 6951285 Manufacturer SKU: TUN6951285 Stock SKU: 6951285‑Tungaloy Name: DPMT070208 AH6225 Tungaloy turning insert Facts Size: 07 Corner radius: 0.8 mm Cutting angle: 55° Relief angle: 11° Plate thickness: 2.38 mm Hole: with hole (cylindrical + one‑sided countersink 40°–60°) Special features Material: carbide Coating: PVD Grade: AH6225 (universal for stainless steel) Geometry: rhombic 07 Chipbreaker: single‑sided Intended application: turning (external and internal) ISO‑standard insert System components: insert, matching holder/boring bar, backing/clamp set, replacement screws FAQ What materials is this insert best suited for? The DPMT070208 AH6225 turning insert (SKU 6951285‑Tungaloy) is formulated primarily for stainless steel and offers reliable performance across many austenitic and ferritic grades. Can the insert be used for internal turning operations? Yes, the rhombic 07 geometry and 55° orientation make the insert suitable for both external and internal turning applications where access and edge strength are required. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases the cutting edge strength for medium machining, improving tool life and resistance to chipping while still allowing acceptable surface quality. What does the chipbreaker and hole design provide? The single‑sided chipbreaker combined with a cylindrical hole with countersink promotes consistent chip formation and secure clamping, which helps to reduce downtime from unstable chips or poor seat contact. How is holder compatibility determined? Compatibility for ISO‑standard inserts depends on holder form, relief angle, tolerance class, fastening method, insert size and thickness; confirm these parameters against the holder specification before selection. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com