EBFM 20T25S Wendeplatten - Tungaloy
Optimise milling productivity with a carbide, rhombic insert designed for secure clamping and stable chip control; the 75° cutting angle and precise seat geometry ensure reliable performance in Tungaloy milling systems. Order the EBFM 20T25S indexable insert directly via Metav Werkzeuge or consult our specialists for application support. EBFM 20T25S indexable milling insert (rhombic, 75°) — Tungaloy The EBFM20T25S is a rhombic indexable milling insert for milling applications, engineered for face, shoulder, slot and contour operations within Tungaloy milling systems. Compatible with Tungaloy milling systems 75° cutting angle for stable machining Rhombic shape with single-sided chipbreaker Carbide body with cylindrical hole for secure clamping Greater process stability through geometry and material The combination of a 75° cutting angle and a carbide substrate delivers improved cutting engagement and reduced vibration during milling, which directly increases process stability. A well-matched insert geometry reduces forced tool movements and supports consistent material removal rates; this leads to higher productivity and fewer interruptions in the machining cycle. The technical design focuses on repeatable performance, making the insert especially suitable for series production where stable cutting conditions are essential. Secure location and clamping for repeatable accuracy A cylindrical hole and controlled seat geometry ensure a secure, repeatable clamping position in compatible milling bodies. Correct fit between insert and cutter body is essential: the insert seat, plate geometry and clamping screw must be technically matched to the cutter to guarantee accurate location and torque transmission. The result is less eccentric run-out and better surface quality, while the robust clamping arrangement supports safe tool indexing and minimal set-up variance. Versatile machining tasks with targeted chip control The rhombic shape and single-sided chipbreaker enable a focused cutting action that is beneficial for face, shoulder and slot milling as well as contour work, depending on the chosen tool family. The 20 mm insert size combined with a 2.78 mm thickness provides a compact solution for medium-duty applications, giving a balance between rigidity and accessibility in tight geometries. The chipbreaker design promotes controlled chip formation, which simplifies chip evacuation and lowers the risk of built-up edge in many common steels and alloyed materials. Practical handling and system considerations Made from carbide and supplied as part of a modular milling system, the insert is indexed to present fresh cutting edges as wear occurs, reducing downtime compared with solid cutters. The plate is intended for use with Tungaloy milling systems; a verification of seat and geometry compatibility is recommended before assembly. As an indexable solution, the design supports predictable maintenance intervals and straightforward replacement, while the single-sided chip control aids consistent surface finish with reduced rework requirements. For tailored advice on Tungaloy carbide indexable inserts and availability of the EBFM 20T25S, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6715199-Tungaloy Manufacturer SKU: TUN6715199 Manufacturer article number: 6715199 Model series: Milling indexable inserts Label: EBFM20T25S Tungaloy indexable insert Facts Size: 20 mm Thickness: 2.78 mm Relief angle: 5° Cutting angle: 75° Hole: with hole Hole style: cylindrical hole Chipbreaker: single-sided Special features Material: Carbide Shape: rhombic For milling (face, shoulder, slot, high-feed, contour) Compatible with Tungaloy milling systems; matching seat and geometry required Indexable design for economical edge replacement FAQ Is the insert compatible with Tungaloy milling bodies? Compatibility requires a matching seat and geometry; the EBFM20T25S is designed for use in Tungaloy milling systems where the insert seat and cutter body are technically aligned. Which machining tasks suit this insert best? The indexable milling insert is suitable for face, shoulder, slot and contour milling depending on the associated tool family and cutter configuration. What material is the insert made from? The EBFM20T25S is made from carbide, providing wear resistance and stability for typical milling applications. How does the chipbreaker affect performance? The single-sided chipbreaker promotes controlled chip formation, improving chip evacuation and supporting consistent surface quality for many workpiece materials. What is the insert size and thickness? Size is 20 mm with a thickness of 2.78 mm, offering a compact profile for medium-duty milling operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EBFM 25T32S Wendeplatten - Tungaloy
Take advantage of proven compatibility, stable clamping and reliable chip control to keep milling cycles productive and predictable; the combination of carbide construction, 75° rhombic geometry and a cylindrical hole ensures long tool life and quick insert changes — order directly via Metav Werkzeuge or consult our specialists for application matching. EBFM 25T32S indexable insert for milling — Tungaloy, 75° rhombic, 3.97 mm The EBFM 25T32S is an indexable carbide insert designed for Tungaloy milling systems, intended for face, shoulder, slot, high-feed and contour milling where tool body, insert seat and geometry must match. 75° rhombic geometry for versatile milling 3.97 mm plate thickness for stable clamping Cylindrical hole for secure seating Single-sided chipbreaker for controlled chips System compatibility and secure clamping for uninterrupted production The EBFM25T32S belongs to a system-based model series of milling indexable inserts where the insert, cutter body and clamping screw form a matched unit. This design requirement — that the insert seat, geometry and cutter body are technically compatible — reduces setup errors and downtime, contributing directly to higher machine utilisation. The combination of a carbide substrate and precise seating improves repeatability during index changes, supporting consistent process results and less rework over multiple production runs. Geometry and chip control that support surface quality and tool life With a 75° geometry and a rhombic outline, the insert balances entry angle and cutting edge strength for a wide range of milling tasks. The 3.97 mm plate thickness increases rigidity at the clamping point, while the cylindrical hole provides a secure mechanical seat that resists movement under load. The single-sided chipbreaker promotes predictable chip formation and evacuation, which lowers heat concentration and helps maintain a steady cutting edge. These features translate into fewer interruptions for chip clearing and improved surface finish in serial production. Practical applications and productivity benefits in milling workflows Designed for versatile use, the insert is suitable for face milling, shoulder milling, slotting, high-feed and contour operations when used in the matching tool family. The standardised form factor and secure clamping reduce changeover time and simplify inventory management of spare inserts. As a carbide component engineered for system integration, it supports productive machining and contributes to cost-efficiency through longer intervals between regrinds and fewer rejects. Technical documentation for cutter matching and recommended operating parameters is available to ensure optimal performance. For tailored advice on integrating the Tungaloy EBFM25T32S insert into existing tooling systems and to place orders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our team will assist with technical matching and availability. Technical data Article number: 6725770 Manufacturer SKU: TUN6725770 SKU: 6725770-Tungaloy Model series: milling indexable inserts Name/Label: EBFM25T32S Tungaloy insert Material: carbide Core specifications Geometry angle: 75° Relief angle: 5° Plate thickness: 3.97 mm Plate size: 25 mm Manufacturer article number: 6725770 Design and special features Shape: rhombic Hole: cylindrical hole (with hole) Chipbreaker: single-sided Intended use: milling System components: insert, cutter body, clamping screw, optional shim Mounting requirement: matching insert seat and cutter body FAQ Is the EBFM25T32S compatible with non-Tungaloy tool bodies? Compatibility requires matching seat geometry and clamping features; the EBFM25T32S is designed for Tungaloy milling systems and may need a compatible cutter or adapter to work correctly in other assemblies. What milling operations suit this insert best? The insert is intended for face, shoulder, slot, high-feed and contour milling, where the combination of 75° rhombic geometry and a single-sided chipbreaker delivers reliable cutting and chip control. How does the single-sided chipbreaker affect performance? The single-sided chipbreaker on the insert produces consistent chip fragments and improves evacuation, reducing heat build-up at the cutting edge and aiding surface finish and tool life during continuous milling. How is the insert secured in the cutter body? The cylindrical hole and the specified plate thickness of 3.97 mm provide a secure seating geometry; the insert is clamped with a clamping screw into a matching cutter body to ensure stable positioning under load. What material is the insert made from and what does that mean for use? The insert is manufactured from carbide, offering edge stability and wear resistance suited to a range of milling tasks when used within the appropriate Tungaloy tool system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EBFM 30T32S - Tungaloy
Benefit from a combination of carbide durability, precise 75° geometry and reliable chip control for uninterrupted milling. Order the EBFM30T32S indexable insert directly via Metav Werkzeuge or ask our consultants if needed. EBFM 30T32S indexable insert for milling (Tungaloy) — 75° geometry, 3.97 mm thickness EBFM30T32S is an indexable insert developed for use in Tungaloy milling systems, engineered for face, shoulder, slot and high-feed milling where insert seat, geometry and cutter body match technically. 75° geometry for stable cutting 3.97 mm thickness, rhombic shape Single-sided chipbreaker for chip control Cylindrical hole for secure clamping Engineered for productive milling operations The insert is manufactured from carbide, giving a high wear resistance that supports longer tool life and fewer interruptions. The 75° geometry provides a stable cutting edge that reduces vibration in heavy-duty passes, while the single-sided chipbreaker improves chip control during face and contour milling. These technical choices translate into measurable productivity gains: steadier machining, predictable tool changes and improved process reliability in high-volume production environments. Precise fit and secure mounting for consistent results A correct match between the insert seat, insert geometry and the cutter body is essential to achieve repeatable results; the system design requires technical compatibility. The rhombic form with a cylindrical hole and a 3.97 mm thickness ensures secure clamping and predictable engagement. The 5° relief angle reduces rubbing on the flank and helps maintain cutting efficiency at varying depths, which in practice means better surface finish and reduced risk of premature edge wear. Versatile application and reduced tool management Designed for a wide range of milling tasks, the insert supports face, shoulder, slot, high-feed milling and contouring depending on the assigned cutter family. Its construction aims to lower the number of tool variants required on the shop floor, simplifying inventory and reducing set-up time. The outcome is fewer tool changes, consistent component quality and higher uptime—advantages that are particularly valuable for production shops aiming for steady throughput. For technical advice or to request a compatibility check for Tungaloy inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the EBFM series and suitable cutter bodies. Technical Data Article number: 6725772 SKU: 6725772-Tungaloy Manufacturer SKU: TUN6725772 Model series: Fräswendeschneidplatten Material: Carbide Label: EBFM30T32S Tungaloy-Indexable insert Facts Geometry angle: 75° Thickness: 3.97 mm Size: 30 mm Relief angle: 5° Hole: with hole Hole style: cylindrical Chipbreaker: single-sided Special features Rhombic insert form Designed for Tungaloy milling systems Typical uses: face, shoulder, slot, high-feed, contour milling System components: cutter body, insert, clamping screw, possible back-up plate Compatibility requirement: matching insert seat, geometry and cutter body FAQ What applications is this insert suitable for? The EBFM30T32S indexable insert is intended for milling tasks such as face, shoulder, slot, high-feed and contour milling when paired with the correct Tungaloy cutter body. How does the 75° geometry affect machining? A 75° geometry delivers a stable cutting edge that reduces vibration and allows heavier cuts with improved edge stability for productive milling. Is this insert compatible with any milling cutter? Compatibility requires that the insert seat, geometry and cutter body are technically matched; ensure the cutter body is specified for the Tungaloy EBFM series and the insert dimensions correspond. What does the single-sided chipbreaker offer? The single-sided chipbreaker is engineered to control chip flow and fragmentation, improving evacuation and reducing the risk of recutting in many milling conditions. Which material is the insert made from? This indexable insert is manufactured from high-quality carbide, providing wear resistance and reliable cutting performance under typical milling loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EBRM 16T20S Wendeplatten - Tungaloy
Take advantage of a precise combination of carbide construction, a rhombic 16 mm form and a single-sided chipbreaker for consistent milling performance; compatibility with Tungaloy milling systems ensures straightforward tool integration. Order the EBRM16T20S directly via Metav Werkzeuge or ask our consultants if needed. EBRM 16T20S indexable insert for Milling — Tungaloy EBRM16T20S is a rhombic, indexable milling insert designed for use in Tungaloy milling systems, offering a 75° approach angle and a 5° relief for reliable cutting geometry. Rhombic form, 16 mm Carbide grade for durability Single-sided chipbreaker With central cylindrical hole Stable geometry for efficient and predictable milling The rhombic shape combined with a 75° approach angle delivers a stable engagement when performing shoulder, face or contour passes. Built from carbide, the insert maintains its cutting edge under typical roughing and finishing loads, which reduces downtime for edge changes and supports steady cycle times. The presence of a single-sided chipbreaker focuses chip control on one cutting edge, improving evacuation in many milling set-ups and helping to maintain surface quality without overcomplicating process parameters. Secure clamping and system-matching for process reliability A central cylindrical hole provides reliable locating and clamping in compatible cutter bodies; proper fixation ensures repeatable positioning and contributes to consistent part tolerances. The insert’s seat, geometry and cutter body must be technically matched within the Tungaloy system architecture to exploit its full potential. This system-oriented design reduces uncertainty during tool set-up and allows predictable indexability where the tool family supports it, improving throughput and reducing inspection overhead. Practical advantages and typical milling uses Designed for general milling tasks, the insert is suitable for plan, shoulder, slot, high-feed and contour milling depending on the assigned tool family. With a 2.78 mm plate thickness and 16 mm form size, the component suits compact toolholders and modular heads where rigidity and chip control are decisive. The modest 5° relief helps to balance cutting forces and tool life, while the carbide composition supports repeatable performance across production batches, aiding process stability and economic tool life management. For technical availability, compatibility checks or delivery options for this Tungaloy carbide insert, contact Metav Werkzeuge — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for expert advice and rapid supply. Technical Data Article number: 3113048 Manufacturer article number: 3113048 Manufacturer SKU: TUN3113048 Vendor SKU: 3113048-Tungaloy Series: Milling indexable inserts Designation: EBRM16T20S Numbers / Core Technical Data Size: 16 mm Thickness: 2.78 mm Relief angle: 5° Approach angle: 75° Designs / Special Features Material: carbide Shape: rhombic Hole: with hole (cylindrical hole) Chipbreaker: single-sided Application: Milling FAQ Which milling operations are suitable for this insert? The EBRM16T20S insert is intended for plan, shoulder, slot, high-feed and contour milling depending on the associated tool family in the Tungaloy system. How is the insert clamped in the cutter body? Fixation relies on the central cylindrical hole and the matching clamping screw of the cutter; proper seat and geometry matching within the Tungaloy milling system are required for secure clamping. What are the key angles of the cutting geometry? This indexable insert has a 5° relief angle and a 75° approach angle, which together support balanced cutting forces and reliable engagement. Is the insert suitable for modular and compact toolholders? Yes, the 16 mm form and 2.78 mm thickness make the insert appropriate for many compact and modular milling heads where rigidity and chip control are important. Does the insert offer indexable edges and chip control? The component is an indexable insert with a single-sided chipbreaker; the number of usable edges and indexing options depend on the geometry and the assigned tool family within the Tungaloy system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EBRM 16T20S Wendeplatten - Tungaloy
Take advantage of the combination of precise 75° geometry, reliable single-sided chip control and secure clamping for stable milling cycles; order directly via Metav Werkzeuge or consult our specialists for system matching. EBRM 16T20S – Rhombic 75° insert for milling, Tungaloy A EBRM16T20S indexable milling insert for Tungaloy systems, engineered for face, shoulder, slot, high‑feed and contour milling where insert seat, geometry and cutter body are technically matched Rhombic 75° geometry Cylindrical central hole for clamping 2.78 mm plate thickness Single-sided chipbreaker Compatible with Tungaloy milling systems Consistent chip control for efficient milling The insert combines a single-sided chipbreaker with a defined 75° geometry, delivering predictable chip formation under varying cutting conditions. The asymmetric breaker guides chips away from the cutting zone, reducing re-cutting and heat concentration; this translates into improved tool life and fewer cycle interruptions for production environments. Machining strategies such as face and shoulder milling benefit from the controlled evacuation, while contour and high‑feed operations gain from steadier cutting forces. Where operators need a clear explanation: the chipbreaker modifies chip curl and thickness to avoid entanglement and maintain surface quality during extended runs. Secure clamping and repeatable installation A cylindrical hole and standard clamping arrangement ensure repeatable seating and torque distribution, while the 2.78 mm thickness contributes to a stable cutting edge under load. The insert’s 5° clearance angle reduces flank rubbing at entry, limiting wear on the insert corner and the cutter body. For workshops this means shorter set‑up times and consistent part tolerances: once the plate seat, geometry and cutter body are matched according to the system specification, subsequent insert changes restore original cutting conditions with minimal adjustment. The construction supports a high degree of repeatability across tool changes and production shifts. Durable carbide construction for steady productivity Manufactured from carbide, the insert provides the wear resistance expected in indexable systems and supports cost‑effective turnaround between regrinds or replacements. The model series is designed for integration into Tungaloy milling systems; the modular approach — cutter body, insert, clamp and optional shim — allows targeted maintenance and simple inventory management. For production managers the practical benefit is clear: a robust insert geometry and proven material base that sustain machining quality while keeping changeover and downtime to a minimum. Confidence in surface finish and dimensional stability is enhanced by the combination of geometry and material properties. For precise advice on system compatibility and to request the EBRM16T20S from Metav Werkzeuge, please contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and delivery options Technical Data Manufacturer article number: 3113047 SKU: 3113047-Tungaloy Manufacturer SKU: TUN3113047 Manufacturer: Tungaloy Model series: Fräswendeschneidplatten Designation: EBRM16T20S Material: Carbide Facts Plate size: 16 mm Plate thickness: 2.78 mm Angle: 75° Clearance angle: 5° Hole style: Cylindrical Special features Rhombic plate form Single-sided chipbreaker With central hole for clamping For Tungaloy milling systems System: insert, clamp screw and optional shim FAQ What applications is this insert suited for? The EBRM16T20S insert is intended for face, shoulder, slot, high‑feed and contour milling within compatible Tungaloy milling systems. How does the chipbreaker affect machining? The single‑sided chipbreaker on the EBRM16T20S modifies chip curl and thickness to improve evacuation and reduce re‑cutting, supporting improved tool life and surface quality. What are the key dimensions to check before fitting? Check the plate size (16 mm), plate thickness (2.78 mm), angle (75°) and that the cutter body accepts a rhombic insert with a cylindrical central hole. Is this insert compatible across different manufacturers? Compatibility requires technical matching of insert seat, geometry and cutter body; the EBRM16T20S is specified for use in Tungaloy milling systems and should be paired with matching Tungaloy cutter bodies. What identifiers help when reordering? Use the manufacturer article number 3113047 or SKU 3113047-Tungaloy when reordering the EBRM16T20S. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EBRM 20T25S - Tungaloy
Benefit from the combination of stable chip control, a robust cemented carbide substrate and a precise 75° cutting geometry for reliable milling operations; order directly via Metav Werkzeuge or consult the specialists for matching and delivery. EBRM 20T25S indexable insert for Milling — Tungaloy The EBRM20T25S is an indexable insert designed for versatile milling tasks, compatible with matched cutter bodies and seats for face, shoulder, groove, high‑feed and contour milling. Rhombic insert, 20 mm size, 75° cutting geometry Cemented carbide substrate for extended tool life Cylindrical hole for secure clamping One‑sided chipbreaker for controlled chip formation Consistent geometry and material for predictable productivity The rhombic design combined with a defined 75° cutting geometry provides a stable cutting edge and predictable engagement during Milling. Made from cemented carbide, the insert offers resistance to edge wear and maintains dimensional stability across repeated indexing. This results in more consistent part tolerances and reduced rework in serial production. The specified clearance of 5° supports reliable chip flow and decreases rubbing on the flank, improving surface finish and process security. Secure mounting and straightforward integration into milling systems A cylindrical hole and the defined seat interface ensure a secure clamping arrangement in compatible cutter bodies; the system includes the cutter body, insert, clamping screw and, where applicable, a shim. The 2.78 mm thickness and 20 mm nominal size make the component straightforward to replace during scheduled maintenance. Clear compatibility between insert seat, geometry and milling body minimises setup time and reduces the risk of incorrect assembly, supporting uninterrupted production runs. Controlled chip formation and adaptable milling applications The single‑sided chipbreaker design supports consistent chip control for a range of operations — face, shoulder, groove, high‑feed and contour milling depend on the assigned tool family and cutter. By combining geometry and a robust substrate, the insert helps manage heat and chip evacuation during interrupted or continuous cuts. This balance between cutting behaviour and insert strength contributes to sustained tool performance and repeatable part quality in diverse milling scenarios. For specification matching, availability or to order the Tungaloy EBRM 20T25S indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss cutter compatibility and delivery options Technical Data Article number: 3113052 Manufacturer SKU: TUN3113052 Brand: Tungaloy Product name: EBRM20T25S Model series: milling indexable inserts Application: Milling Core Data Insert size: 20 mm Plate thickness: 2.78 mm Cutting geometry angle: 75° Clearance angle: 5° ISO designation: 20T25S Manufacturer article number: 3113052 Special features Material: cemented carbide Plate shape: rhombic Hole: with cylindrical hole Chipbreaker: one‑sided Typical uses: face, shoulder, groove, high‑feed and contour milling System components: cutter body, indexable insert, clamping screw, possible shim FAQ What milling operations is this insert suited for? The EBRM20T25S insert from Tungaloy is intended for face, shoulder, groove, high‑feed and contour milling depending on the assigned cutter family and seat compatibility. How is the insert clamped in the cutter body? Clamping is achieved via the cylindrical hole and a clamping screw; the matched seat and geometry ensure secure fixation for stable cutting. What material is the insert made of and what does that mean for tool life? The insert is manufactured from cemented carbide, which provides good wear resistance and stable cutting performance for longer service intervals under normal milling conditions. What are the key dimensional data to check for compatibility? Important values are the 20 mm nominal size, 2.78 mm plate thickness, 75° cutting geometry and 5° clearance angle; these determine seat and cutter body compatibility. Does the insert include a chipbreaker, and why is that important? Yes, it features a one‑sided chipbreaker designed to promote controlled chip formation and effective evacuation during a variety of milling operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EBRM 20T25S Wendeplatten - Tungaloy
Combining cemented carbide construction with a rhombic 20 mm form and a 5° clearance angle, this insert delivers consistent, productive milling results and stable chip control. Order the EBRM20T25S directly via Metav Werkzeuge or consult our specialists for system matching. EBRM 20T25S indexable insert for milling — 20 mm rhombic, 5° clearance | Tungaloy EBRM20T25S is a Tungaloy indexable insert designed for versatile milling applications, offering secure clamping and controlled chip formation in compatible milling systems. Rhombic 20 mm insert for precise milling 5° clearance angle for stable cutting Cylindrical hole for secure clamping Single-sided chipbreaker for controlled chips Consistent cutting performance for production milling The EBRM20T25S is manufactured from cemented carbide, providing high resistance to wear and a long tool life under typical milling conditions. The rhombic geometry and 20 mm nominal size make the insert suitable for planing, shoulder and contour milling where a reliable, repeatable cutting edge is required. The 5° clearance reduces rubbing on the flank face and helps maintain a clean cut, while the solid carbide substrate supports higher feed rates and consistent surface finish. For engineers selecting an insert, the combination of geometry and substrate delivers predictable tool life and machining stability. Improved chip control and secure clamping for efficient machining A dedicated single-sided chipbreaker facilitates effective chip formation and evacuation, reducing heat concentration at the cutting zone and lowering the risk of built-up edge. The presence of a cylindrical hole ensures positive location and clamping on the cutter body, which translates into reduced vibration and enhanced process reliability. These features together support optimised cycle times and fewer interruptions for rework. For non-specialists: a chipbreaker shapes the chips so they are shorter and easier to clear, directly improving surface finish and tool life. System compatibility and practical selection advice This insert is intended for use in modular milling systems comprising a milling body, the indexable insert, a clamping screw and, where necessary, a backing plate; all components must be technically compatible. When integrating the insert into an existing tool family, check seat geometry, insert size and hole style to ensure correct fit and clamping force. The insert’s specifications—rhombic form, cylindrical hole and single-sided chipbreaker—mean it is particularly effective in setups prioritising secure fixation and controlled chips. If system matching is required, consult technical data sheets or contact a Metav Werkzeuge consultant for tailored recommendations. For reliable, high-productivity milling with Tungaloy carbide inserts such as the EBRM20T25S, contact Metav Werkzeuge for expert selection and rapid supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 3113051 Manufacturer article number: 3113051 Manufacturer SKU: TUN3113051 SKU: 3113051-Tungaloy Model series: Milling indexable inserts Material: cemented carbide Facts Insert size: 20 mm Thickness: 2.78 mm Clearance angle: 5° Included angle: 75° ISO designation: 20T25S Special features Rhombic insert form Cylindrical hole (with hole) Single-sided chipbreaker Designed for milling applications Requires compatible milling body, clamping screw, backing plate FAQ What materials is this insert suitable for? The EBRM20T25S indexable insert by Tungaloy is made of cemented carbide and is suitable for a wide range of materials commonly machined in milling, depending on the selected cutting data and toolbody configuration (SKU 3113051-Tungaloy). Which milling operations suit this insert best? The insert is designed for plan, shoulder, groove, high-feed and contour milling within matching Tungaloy milling systems; selection depends on the specific cutter body and machining strategy used with the EBRM20T25S. How does the chipbreaker affect machining? The single-sided chipbreaker on the insert promotes short, controlled chips, improving chip evacuation and surface finish while reducing tool wear on the EBRM20T25S. How is the insert secured in the milling body? The presence of a cylindrical hole enables positive location and secure clamping with the appropriate clamping screw and backing plate; correct seat geometry is essential for the EBRM20T25S to perform reliably. Is the insert compatible with other brands of milling bodies? Compatibility requires matching seat geometry, hole style and clamping system; the EBRM20T25S is intended for Tungaloy milling systems, so verification against the cutter body specifications is advised. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EBRM 25T32S Wendeplatten - Tungaloy
Efficient milling performance from a durable carbide construction and a rhombic 25 mm geometry supports stable chip control and prolonged edge life; the 75° orientation and single-sided chipbreaker make the insert well suited to high-engagement operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. EBRM 25T32S indexable milling insert for milling – Tungaloy The EBRM25T32S is a rhombic indexable insert for Tungaloy milling systems, designed for face, shoulder, slot, high-feed and contour milling where matched tool geometry is required. Rhombic insert, 25 mm size 75° main angle for stable engagement Single-sided chipbreaker for chip control Cylindrical hole for secure mounting Enhanced process stability through matched system design The insert is part of a system that requires matching of the insert seat, geometry and cutter body; this ensures consistent cutting behaviour and reduces unexpected tool failures. Manufactured from carbide, the plate offers rigidity and wear resistance that translate into fewer tool changes and more productive machining cycles. When the insert geometry is combined with a correctly specified milling body and clamping screw, the result is a repeatable machining process that supports predictable cycle times and surface finish. Geometry engineered for controlled chips and edge strength A rhombic plate form with a 25 mm nominal size and a 3.97 mm plate thickness provides a balance between cutting edge strength and accessibility in shoulder or contour milling. The single-sided chipbreaker is optimised to manage chip formation under varying depths of cut, reducing the risk of built-up edge and tool overload. The modest 5° relief (free angle) assists in maintaining cutting-edge engagement while limiting rubbing on the flank face, which benefits both tool life and surface integrity. Secure clamping and straightforward handling on the shop floor The insert features a cylindrical hole for positive locating and reliable fastening; combined with a compatible clamping screw and seating the arrangement delivers mechanical stability during heavy engagement or interrupted cuts. The design simplifies indexable insert changes and retains axial and radial positioning accuracy when mounted in Tungaloy-compatible cutter bodies. Clear system matching reduces set-up time and helps maintain process security across batch runs. Versatile application range for efficient milling operations Used within the designated tool families, the plate supports a wide range of milling tasks — from planing and shoulder milling to high-feed and detailed contouring — depending on the chosen cutter body. The combination of robust carbide material and the insert’s geometry promotes extended edge performance, which can lower total tooling consumption and improve throughput. Where high process reliability and consistent surface quality are required, this insert offers a practical balance of performance and durability. For tailored selection of Tungaloy inserts and to ensure optimal system matching, contact Metav Werkzeuge for application-specific advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 3113055 SKU: 3113055-Tungaloy Manufacturer SKU: TUN3113055 Model series: Fräswendeschneidplatten Material: carbide Application: Milling Facts Designation: EBRM25T32S ISO code: 25T32S Plate size: 25 mm Thickness: 3.97 mm Main angle: 75° Relief angle: 5° Hole style: cylindrical hole Special features Rhombic plate form Single-sided chipbreaker With cylindrical hole For Tungaloy milling systems System components: milling body, indexable insert, clamping screw, optional shim FAQ What cutter bodies are compatible with this insert? Compatibility requires that the insert seat, geometry and cutter body are technically matched; the EBRM25T32S is intended for Tungaloy milling systems with the appropriate seat and clamping arrangement. Which milling operations suit this insert best? The plate is suitable for face, shoulder, slot, high-feed and contour milling when used in the correct tool family and with suitable cutting parameters. How does the chipbreaker affect machining? The single-sided chipbreaker on the insert improves chip control and reduces the risk of chip entanglement, helping to maintain stable cutting conditions and extend edge life. Is the insert mounted through a hole or clamped by other means? This insert features a cylindrical hole for positive locating and secure fastening with a clamping screw in compatible cutter bodies. What benefits does the 75° orientation provide? A 75° main angle increases engagement stability and is advantageous for shoulder and heavy-cut milling where a robust cutting geometry is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EBRM 25T32S null Wendeplatten - Tungaloy
Benefit from a combination of productive milling performance, hardmetal construction and a 75° geometry for precise shoulder and contour operations; order the EBRM 25T32S directly via Metav Werkzeuge or consult our technical advisors for system matching and delivery options. EBRM 25T32S EBRM indexable milling insert by Tungaloy — 75° rhombic, carbide The EBRM25T32S is a rhombic, indexable carbide insert engineered for productive milling in compatible Tungaloy milling systems. 75° rhombic geometry for precise shoulder cuts Carbide body for extended tool life Single-sided chipbreaker for controlled chip flow Cylindrical hole for secure clamping Boosted productivity through geometry and material The combination of a 75° geometry and a hardmetal substrate delivers a tangible performance advantage in shoulder, face and contour milling. The acute rhombic form concentrates cutting forces at the intended edge, enabling stable engagement when machining stepped shoulders or narrow contours. The carbide composition provides high wear resistance and thermal stability, which extends indexable insert life under variable cutting conditions. For production-focused shops, this translates into fewer tool changes, higher process reliability and consistent surface quality. Controlled chip formation and secure clamping for safer cycles A single-sided chipbreaker optimises chip segmentation and evacuation during interrupted cuts and variable feeds, reducing the risk of built-up edge and tool chatter. The insert’s cylindrical hole and standard clamping interface ensure rigid seating in compatible cutter bodies, promoting repeatable positioning and minimising vibration. These design choices reduce cycle variability and support predictable machining parameters, which are especially beneficial when switching between roughing and finishing passes on the same workpiece. System compatibility and straightforward integration This insert belongs to the Tungaloy family of indexable milling parts and must be used with matching cutter bodies and clamping screws to ensure correct seating and geometry alignment. The designation EBRM combined with the ISO code 25T32S identifies the insert form and size; the 3.97 mm thickness and 25 mm nominal size are key dimensional references when selecting the correct holder. When holders, seats and insert geometry correspond, the system achieves the designed cutting angles and clearance, enabling the expected cutting performance across applications. Application scope and machining recommendations Designed primarily for milling operations, the insert is suitable for planing, shoulder, slot, high-feed and contour milling tasks depending on the selected cutter family. The moderate clearance angle of 5° supports robust cutting engagement while preserving edge strength—an appropriate compromise for mixed roughing and finishing programmes. For materials that require stable cutting edges, such as alloyed steels and general engineering steels, start with conservative feeds and speeds and adjust based on chip form and surface finish. Regular inspection of the cutting edge will extend service life and maintain process quality. Contact Metav Werkzeuge for advice on fitting the EBRM 25T32S into existing Tungaloy milling systems and for fast delivery options; our team can confirm holder compatibility and supply the required mounting hardware Technical Data Article number: 3113056 Manufacturer SKU: TUN3113056 Internal SKU: 3113056-Tungaloy Model series: Fräswendeschneidplatten Facts Insert size: 25 mm Insert thickness: 3.97 mm Geometry angle: 75° Clearance angle: 5° Special features Material: Hartmetall Shape: rhombisch Chipbreaker: einseitig Hole: mit Loch (zylindrisches Loch) Application: Fräsen System: Tungaloy-frässysteme FAQ What is the primary application for this insert? The EBRM 25T32S is intended for milling applications including shoulder, face, slot, high-feed and contour milling within compatible Tungaloy milling systems. Which material is the insert made from and what does that mean for tool life? This insert is manufactured from Hartmetall (carbide), which provides high wear resistance and thermal stability, resulting in extended tool life under standard milling conditions. How is the insert secured in the cutter body? The EBRM 25T32S features a cylindrical hole for secure clamping; correct seating with matching clamping screws and cutter body is required for repeatable performance. What chip control can be expected with this design? The single-sided chipbreaker promotes controlled chip segmentation and evacuation, improving machining stability and reducing the likelihood of built-up edge. Which dimensional data are crucial when selecting a holder? Key dimensions are the 25 mm nominal size, 3.97 mm thickness and the 75° geometry; the clearance angle of 5° is also relevant for holder compatibility. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ENEQ 090508 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated cemented carbide grade (AH120), precise rhombic 09 geometry and a secure cylindrical hole with double-sided countersink for consistent milling performance; order the insert directly via Metav Werkzeuge or consult the technical advisors if required. ENEQ 090508 AH120 – Indexable insert for milling, Tungaloy The ENEQ090508 AH120 is an indexable insert for milling applications in Tungaloy milling systems, engineered for high process security and sharp cutting edges. PVD-coated cemented carbide AH120 Rhombic 09 shape, 75° cutting angle Cylindrical hole with double-sided countersink Wear- and chip-resistant for secure milling Consistent material removal and predictable tool life The insert is manufactured from cemented carbide and finished with a PVD coating, producing a surface that supports a sharp, durable cutting edge. This combination ensures stable chip formation and reduced flank wear during planing, shoulder and contour milling operations. The AH120 grade is formulated for resistance to both wear and edge chipping, which translates into fewer interruptions for index changes and a more stable process window. By selecting a PVD-coated carbide insert, the machining process benefits from improved heat resistance and a longer edge life compared with uncoated grades, making production runs more predictable and efficient. Secure clamping interface and geometry for repeatable results Designed with a rhombic 09 plate form and a 75° cutting angle, the insert geometry gives a reliable engagement with the workpiece while maintaining good access in shoulder and profile operations. The insert includes a cylindrical hole with a double-sided countersink (40°–60°), which supports precise seating and torque transmission when mounted in the cutter body; this reduces micro-movements and contributes to repeatable positioning. The nominal thickness of 5.56 mm and a corner radius of 0.8 mm offer a balance between strength and edge acuity, permitting effective finishing or semi-finishing cuts depending on the assigned cutter family. Material range and application advantages This grade and geometry are intended for general milling tasks where a sharp cutting edge and process reliability are required. The insert suits planing, shoulder, slotting, high-feed and contour milling depending on the selected cutter body and system compatibility. The 0° relief angle and absence of an integrated chipbreaker indicate suitability for operations where chip control is managed by the cutter body or downstream toolpath strategy. By pairing the insert with the correct Tungaloy milling body and clamp, operators gain both surface quality consistency and predictable wear behaviour, which supports optimised tool-change planning and reduced unplanned downtime. Contact Metav Werkzeuge for tailored application advice or to arrange supply of the Tungaloy ENEQ090508 AH120 indexable insert through Metav Werkzeuge's sales team. Technical data Article number: 6811812 SKU: 6811812-Tungaloy Manufacturer SKU: TUN6811812 Model series: Fräswendeschneidplatten Designation/ISO: ENEQ090508 Label: ENEQ090508 AH120 Tungaloy-Wendeplatte Facts Thickness: 5.56 mm Corner radius: 0.8 mm Cutting angle: 75° Relief angle: 0° Size: 09 Special features Material: cemented carbide Coating / grade: PVD-coated, AH120 Hole: cylindrical hole with double-sided countersink (40°–60°) Plate form: rhombic Chipbreaker: none Application: Milling (planing, shoulder, slotting, high-feed, contour) FAQ Which milling operations is this insert best suited for? The ENEQ090508 AH120 indexable insert is suitable for plan, shoulder, slot and contour milling, with appropriate cutter body selection and clamping to match the intended operation. What key benefits does the AH120 grade offer? AH120 delivers wear and chip resistance through its PVD-coated cemented carbide composition, supporting a sharp, durable edge and improved process security in milling tasks. How does the hole and countersink affect mounting stability? The cylindrical hole with a double-sided countersink (40°–60°) ensures accurate seating in the cutter and helps prevent micro-movements, improving repeatability and torque transfer during machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ENEQ 100508 AH120 Wendeplatten - Tungaloy
Take advantage of a wear- and breakage-resistant PVD-coated AH120 grade combined with a sturdy rhombic geometry and a 75° cutting angle for consistent milling performance; order the ENEQ100508 insert via Metav Werkzeuge or consult the team for technical matching to the chosen milling body. ENEQ100508 AH120 rhombic milling insert (75°) by Tungaloy ENEQ100508 AH120 is an indexable insert designed for milling applications, providing a sharp, process-safe cutting edge for Tungaloy milling systems. PVD-coated carbide AH120 Rhombic insert, 75° cutting geometry 0.8 mm corner radius for edge strength Cylindrical hole with double-sided countersink Reliable cutting performance for diverse milling strategies The PVD-coated AH120 grade is engineered for milling tasks where both a sharp cutting edge and consistent performance are required. Manufactured from carbide, the insert combines a robust substrate with a hard, wear-resistant coating to reduce flank wear and the risk of edge chipping during face, shoulder, slot, high-feed and contour milling. The rhombic form and 75° lead ensure a strong cutting geometry that balances edge strength and chip flow, helping to maintain stable cutting conditions across interrupted and continuous cuts. Fewer interruptions and predictable process security A central advantage of this insert is its contribution to process security and extended tool life, resulting from controlled chip formation and a coating that resists abrasive wear. The combination of a well-defined corner radius and a coated carbide grade reduces the need for frequent insert changes and minimises unplanned stoppages. For production environments, this translates into improved productivity and a lower cost per finished part through fewer tool interventions and more consistent surface finish. Practical compatibility and secure clamping for safe operation The insert is supplied in the ENEQ100508 form with a 0.8 mm corner radius, 5.56 mm thickness and a plate size of 10, and it features a cylindrical hole + double-sided countersink (40°–60°) to support reliable centring and clamping. Correct function requires that the insert seat, geometry and milling body are technically compatible within the Tungaloy system; the typical system consists of the milling body, the indexable insert, a clamping screw and, where applicable, a shim. The presence of a hole and countersink improves clamp stability and repeatability when the appropriate screw and seat are used. For demanding milling applications, choose the Tungaloy ENEQ100508 AH120 insert and contact Metav Werkzeuge for availability and technical matching—eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6811813 Manufacturer SKU: TUN6811813 SKU: 6811813-Tungaloy Designation: ENEQ100508 Dimensions & geometry Plate size: 10 Plate thickness: 5.56 mm Cutting angle: 75° Corner radius: 0.8 mm Materials & special features Material: carbide Coating: PVD Grade: AH120 Plate form: rhombic Free angle: 0° With hole: yes Hole style: cylindrical hole + double-sided countersink (40°–60°) Chipbreaker: without Series: milling indexable inserts Application: milling FAQ What milling operations is this insert suitable for? The ENEQ100508 AH120 indexable insert by Tungaloy (SKU 6811813-Tungaloy) is suitable for face, shoulder, slot, high‑feed and contour milling, depending on the assigned tool family. How to ensure compatibility with the milling body? Compatibility requires that the insert seat, geometry and the milling body match technically; the ENEQ100508 must be fitted to a Tungaloy milling body with the correct clamping screw and, if required, an underlay/shim. What benefits does the AH120 grade offer? AH120 is a PVD‑coated carbide grade that provides wear and breakage resistance, a sharp cutting edge and consistent cutting behaviour to support process security and prolonged tool life. How is the insert secured in the cutter? The insert has a cylindrical hole with a double‑sided countersink (40°–60°) and is clamped using the appropriate screw and seat; this arrangement improves centring and clamping stability. What are the key dimensions to consider when selecting this insert? Key dimensions for the ENEQ100508 are a plate size of 10, plate thickness of 5.56 mm, a cutting angle of 75° and a corner radius of 0.8 mm Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ENEQ 130608 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant AH120 grade, precise rhombic geometry and secure clamping to maintain stable milling processes; order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. ENEQ 130608 AH120 indexable insert for milling — Tungaloy ENEQ 130608 AH120 indexable insert designed for versatile milling tasks where a sharp cutting edge and process security are required, suitable for plan, shoulder, slot, high-feed and contour milling. PVD-coated carbide AH120 for wear resistance Rhombic plate with 75° cutting angle for versatile pockets Cylindrical hole with double-sided countersink (40°–60°) 0.8 mm corner radius for finishing and contouring Durable grade for consistent tool life and process security The AH120 grade is a PVD-coated carbide engineered for a combination of wear resistance and resistance to chipping, which supports process security in demanding milling operations. PVD (physical vapour deposition) creates a thin, hard coating that reduces adhesive wear and helps maintain a sharp cutting edge for longer intervals. This leads to fewer indexings and more predictable part quality; for production environments where component consistency is critical, the reduced flank and crater wear translates directly into improved uptime and lower overall tooling consumption. Geometry and clamping that reduce set-up ambiguity A rhombic plate form with a 75° approach angle and a 0° clearance configuration delivers versatile cutting dynamics for a wide range of milling tasks. The insert’s 0.8 mm radius provides a balance between surface finish and edge strength, making it well suited for finishing passes and contour work. The plate’s 6.35 mm thickness and the cylindrical hole with double-sided countersink (40°–60°) ensure a secure, repeatable seat in compatible milling bodies; correct seating reduces vibration and index-related errors, which improves edge life and dimensional repeatability on the workpiece. System compatibility and recommended uses This insert belongs to a model series of indexable milling plates intended exclusively for Tungaloy milling systems where plate seat, geometry and milling body match technically. Typical applications include plan, shoulder, slot, high-feed and contour milling, depending on the assigned tool family. Note that the insert is supplied without a chipbreaker, so it is most effective where controlled chip evacuation or uninterrupted cutting geometry is required. For best results, pair the plate with the specified Tungaloy bodies and clamping screws and verify assembly dimensions before production. Practical notes for selection and machining When specifying this indexable plate, consider feed and speed strategies that exploit the AH120 coating: moderate to elevated cutting speeds with conservative feed per tooth often yield the best trade-off between tool life and surface finish. The plate’s construction favours applications demanding a precise cutting edge and repeatable performance rather than aggressive roughing with heavy interrupted cuts. If further machining parameters or adaptation advice are needed, technical consultation is available to align insert choice with material and cycle-time goals. If unsure whether this insert fits an existing tool body, Metav Werkzeuge can confirm compatibility and supply matching components. Contact Metav Werkzeuge for cutting data sheets, availability of Tungaloy ENEQ130608 AH120 indexable inserts and tailored application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6811814 SKU: 6811814-Tungaloy Manufacturer SKU: TUN6811814 ISO code: 130608 Series: Fräswendeschneidplatten Facts Plate size: 13 mm Plate thickness: 6.35 mm Corner radius: 0.8 mm Cutting angle: 75° Clearance angle: 0° Special features Coating: PVD Grade: AH120 Material: carbide Plate form: rhombic Hole: with cylindrical hole and double-sided countersink (40°–60°) Chipbreaker: without Typical applications: plan, shoulder, slot, high-feed and contour milling System note: plate seat, geometry and milling body must match technically FAQ What materials is this insert intended for? The ENEQ 130608 AH120 indexable insert is a PVD-coated carbide grade designed for general milling duties where a sharp cutting edge and process security are required; suitability for specific workpiece materials should be confirmed against machining data and cycle requirements. Does the plate include a chipbreaker geometry? No, the plate is supplied without a chipbreaker, which makes the ENEQ 130608 AH120 more appropriate for applications favouring uninterrupted cutting geometry and controlled chip flow. How does the mounting design affect stability? The cylindrical hole with double-sided countersink (40°–60°) and the plate’s thickness ensure a secure seat in compatible Tungaloy milling bodies, which improves clamping stability and reduces vibration during milling. Can this insert be used for finishing and contour work? Yes, the 0.8 mm corner radius and the rhombic geometry make the insert suitable for finishing and contour milling, providing a good compromise between surface quality and edge strength. What must be checked before fitting the insert? Verify that the plate seat, geometry and the milling body are technically compatible for the Tungaloy system family; mismatched components can impair clamping and process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
ENEQ 160608 AH120 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide AH120 grade and a robust 75° rhombic geometry to achieve stable chip formation and consistent process reliability in milling. The 0.8 mm corner radius and centred hole with double-sided countersink ensure secure clamping and repeatable positioning. Order the ENEQ160608 AH120 insert via Metav Werkzeuge or consult our specialists for application advice. ENEQ 160608 AH120 rhombic indexable insert for milling by Tungaloy — 75° geometry, 0.8 mm radius A ENEQ160608 AH120 indexable insert designed for productive milling in Tungaloy systems, suitable for face, shoulder, slot, high-feed and contour milling when paired with the matching cutter body. PVD-coated carbide AH120 Rhombic 75° geometry 0.8 mm corner radius Centre hole with countersink 40°–60° Longer tool life and predictable wear through AH120 coating The PVD-coated carbide grade AH120 delivers a balance of wear and chipping resistance that supports higher process stability during milling. By combining a hard, adherent PVD layer with a tough carbide substrate, the insert resists abrasive wear while maintaining a sharp cutting edge; this results in longer tool life and more consistent surface quality in serial production. For operations where edge integrity and repeatability matter, the wear characteristics translate directly into reduced downtime and fewer insert changes. Secure clamping and exact repeatability for reliable machining A central cylindrical hole with double-sided countersink (40°–60°) provides stable mechanical engagement between insert and cutter body. This configuration ensures precise seat location and secure clamping, reducing micro-movement under load and improving concentricity. The plate thickness of 6.35 mm contributes to the clamping stiffness, while the integrated system design—insert, milling body, clamping screw and support plate—ensures consistent cutting conditions and simplified maintenance of clamping integrity. Geometry engineered for strength and accessibility The rhombic 75° geometry combines cutting-edge accessibility for shoulder and contour work with robust cutting edge support. The 0.8 mm corner radius helps distribute cutting forces and reduces the risk of chipping at the edge, which is particularly beneficial in mixed-machining tasks where interrupted cuts or variable engagement occur. A relief angle of 0° supports a neutral cutting attitude that can be advantageous for certain cutter body geometries and for maintaining a reliable cutting edge under varying loads. Application focus: productive, versatile milling solutions Intended for a wide range of milling tasks, the insert is suitable for face, shoulder, slot, high-feed and contour milling, depending on the designated tool family and body compatibility. When the insert is matched with the appropriate cutter it enables stable chip control and good surface finish across different materials. System compatibility is essential: seat, geometry and milling body must match technically to obtain the stated performance and reproducibility in production environments. For application guidance and current availability of Tungaloy ENEQ160608 AH120 inserts contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical advice Technical Data Article number: 6811815 SKU: 6811815-Tungaloy Manufacturer SKU: TUN6811815 Brand: Tungaloy Model series: Fräswendeschneidplatten Core specifications ISO designation: 160608 Size: 16 mm Thickness: 6.35 mm Corner radius: 0.8 mm Geometry angle: 75° Relief angle: 0° Hole: with hole; cylindrical hole + double-sided countersink (40°–60°) Materials & features Material: Carbide Coating: PVD Grade: AH120 Plate shape: Rhombic Edge breaker: without Typical application: Milling (face, shoulder, slot, high-feed, contour) System components: insert, milling body, clamping screw, possibly support plate FAQ What materials is this insert suited for? The ENEQ160608 AH120 insert in PVD-coated carbide is designed for general milling tasks and supports a broad range of workpiece materials when used with the appropriate cutter body and cutting data. How does the centre hole design affect performance? A cylindrical centre hole with a double-sided countersink (40°–60°) ensures secure clamping and repeatable seating, improving machining stability and reducing the risk of micro-movement during heavy cuts. What benefits does the 0.8 mm corner radius provide? The 0.8 mm corner radius strengthens the cutting edge, lowering the likelihood of chipping and contributing to improved surface finish and longer insert life under varying engagement conditions. Is the ENEQ160608 AH120 suitable for high-feed milling? Yes, the insert is indicated for high-feed milling among other operations; selection must consider the cutter family and the specific tool body to achieve the desired cutting performance. What system compatibility must be observed before use? Seat geometry, insert form and the milling body must be technically compatible; the system requires the correct cutter body, clamping screw and, if applicable, a support plate to ensure safe and efficient operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040100 GH110 Wendeplatten - Tungaloy
Combine ISO-compliant geometry, robust GH110 grade and precise clamping features to ensure consistent turning performance and long tool life; order the EPGT040100 GH110 Tungaloy insert directly via Metav Werkzeuge or consult the technical team for application advice. EPGT 040100 GH110 Tungaloy insert for turning (rhombic 04, 11° clearance) A EPGT040100 GH110 Tungaloy insert engineered for external and internal turning, offering a rhombic 04 form with a 75° included angle and a single-sided chipbreaker for controlled chip flow. ISO-compliant rhombic 04 geometry GH110 grade for wear and toughness Cylindrical hole with single-sided countersink 11° clearance angle for stable cutting Reliable ISO geometry for consistent setup and productivity The ISO-conforming rhombic shape delivers a predictable cutting profile across setups. Designed with a 75° included angle and standardised dimensions, the insert simplifies toolholder matching and repeatable clamping. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so the component integrates into existing systems without guesswork. The standardised form reduces setup time and supports consistent component quality in medium- to high-volume turning operations. GH110 carbide grade balancing wear resistance and edge stability Manufactured from a Tungaloy carbide grade, GH110 combines abrasion resistance with sufficient toughness to withstand interrupted cuts and variable feed conditions. The material selection reduces flank wear and extends usable life, which lowers tool-change frequency and contributes to predictable process economics. For workshops processing mixed batches, the grade offers broad material coverage while maintaining edge integrity under demanding operational conditions. Chip control and clamping precision for safer, cleaner machining The insert’s single-sided chipbreaker and the cylindrical hole with one-sided countersink (40°–60°) are configured to promote controlled chip formation and reliable clamping. A modest 11° clearance and a plate thickness of 1.59 mm ensure secure seating in appropriate holders, reducing vibration and improving surface finish. Clear chip evacuation supports uninterrupted machining and reduces manual intervention for chip removal, enhancing workplace safety and cycle consistency. Practical benefits in typical turning applications Optimised for turning, this indexable insert suits both external and internal operations where stable edge life and predictable wear rates matter. Selecting the chipbreaker and GH110 grade according to workpiece material and stability will yield measurable gains in process efficiency and part quality. The standard ISO format means straightforward reordering and interchangeability across compatible holders, promoting operational readiness and simplified inventory management. For application-tailored recommendations or to request the EPGT040100 GH110 Tungaloy insert for your turning tasks, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for immediate assistance and delivery options. Technical Data Article number: 6804307 Manufacturer SKU: TUN6804307 Model series: ISO indexable turning inserts Designation: EPGT040100 Material: Carbide Grade/coating: GH110 Facts Thickness: 1.59 mm Clearance angle: 11° Included angle: 75° Size: 04 Countersink: 40°–60° Special features Rhombic plate form (04) Single-sided chipbreaker Cylindrical hole with one-sided countersink ISO-standard insert for external and internal turning Compatibility determined by form, clearance, tolerance class, fastening, size, thickness FAQ What materials can this insert machine effectively? The GH110 grade of the EPGT040100 insert is designed for a broad range of materials; its wear-resistant carbide composition performs well on steels and mixed batches where toughness and edge stability are required. How does the single-sided chipbreaker affect machining? A single-sided chipbreaker provides consistent chip formation and evacuation in turning operations, improving surface finish and reducing the risk of chip entanglement during prolonged cycles. Which holders are compatible with this ISO insert? Compatibility depends on holder form, tolerance class, fastening method, size and thickness; the ISO format of the insert ensures interchangeability with holders designed for rhombic 04 plates and the specified hole/countersink arrangement. What advantages does the 11° clearance offer? An 11° clearance angle reduces flank rubbing, helping to maintain a stable cutting edge and improving finish while lowering cutting forces in many turning applications. Is the insert suitable for interrupted cuts or unstable setups? The GH110 carbide grade balances wear resistance and toughness, offering enhanced edge stability that is beneficial when encountering interrupted cuts or less rigid setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040100 J740 Wendeplatten - Tungaloy
Take advantage of the ISO‑standard geometry and the J740 cemented carbide grade for consistent performance in external and internal turning; order via Metav Werkzeuge or consult our team for holder compatibility and application advice. EPGT 040100 J740 — Indexable turning insert for turning, rhombic 04, 11° clearance (Tungaloy) EPGT040100 J740 is an ISO‑compatibility indexable insert designed for general turning operations where a balance of wear resistance and edge stability is required. ISO rhombic insert, size 04 Cemented carbide, Tungaloy grade J740 11° clearance angle for secure seating Cylindrical hole with 40°–60° countersink Precise cutting performance that enhances process reliability The combination of an ISO‑conforming rhombic shape and the J740 carbide grade provides a reliable basis for repeatable turning operations. The geometry delivers a defined cutting direction and a 75° approach that supports robust chip flow, while the 11° clearance reduces rubbing and helps preserve the cutting edge. Because the insert is manufactured to ISO tolerances, interchangeability with suitable holders is straightforward: compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. The result is improved process security and fewer unexpected adjustments during production. Faster tool changes and stable clamping reduce downtime A secure seating concept is achieved through the cylindrical hole with a 40°–60° countersink, which ensures consistent positioning on the seat and an even distribution of clamping forces. The one‑sided chipbreaker supports controlled chip formation for the intended cutting direction and helps maintain a stable cutting edge during interrupted or continuous cuts. Together these features shorten setup times and reduce the frequency of rework, contributing to higher overall equipment effectiveness for turning centres and manual lathes. Practical application advice for modern turning tasks Designed for external and internal turning, this indexable insert is supplied as part of a system that includes the matching external holder or boring bar, a support shim or clamping set and replacement screws. Choosing the correct chipbreaker and grade in line with part geometry, material and machine stability is essential; the Tungaloy grade emphasises wear resistance and edge stability, making it a strong option where tool life and consistent surface finish are priorities. For standardised production runs the ISO format simplifies inventory management and makes changeovers predictable. Contact Metav Werkzeuge for tailored recommendations on Tungaloy inserts and compatible holders; Metav Werkzeuge can advise on matching the EPGT040100 J740 to specific workpiece materials and machining conditions, or provide ordering guidance via info@metav-werkzeuge.com Technical data Manufacturer article number: 6821731 SKU: 6821731-Tungaloy Manufacturer SKU: TUN6821731 Core specifications Designation: EPGT040100 Angle: 75° Clearance angle: 11° Thickness: 1.59 mm Size: 04 Shape: rhombic Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Features & materials Material: cemented carbide Grade: J740 (Tungaloy carbide grade) Chipbreaker: one‑sided Application: turning (external and internal) Model series: ISO indexable turning inserts System components: compatible external holder/boring bar, support shim/clamping set, replacement screws FAQ What holders are compatible with this insert? Compatibility is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; the EPGT040100 J740 fits holders and boring bars designed for ISO rhombic 04 inserts. Which operations suit this grade and geometry best? The J740 grade and rhombic 04 format are suited to general external and internal turning where a balance of wear resistance and edge stability is required. How does the hole and countersink affect mounting? The cylindrical hole with a 40°–60° countersink enables stable positioning and even clamping forces, improving repeatability when mounting the EPGT040100 J740 in an ISO‑compatible seat. Can the chipbreaker be changed for different materials? Selecting a chipbreaker matched to the workpiece material and cutting conditions is recommended; the one‑sided chipbreaker on this insert is intended for controlled chip formation in the specified turning direction. Is this insert supplied with screws or clamping components? The insert is part of a system; matching holders, support shims or clamping sets and replacement screws are used to complete the assembly for the EPGT040100 J740. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040100 NS9530 Wendeplatten - Tungaloy
Data inconsistency: the product's material is listed as "Hartmetall" (cemented carbide) while the cutting grade is specified as "uncoated cermet" (NS9530); these entries contradict—please verify the product data to ensure accuracy and consistency, as such discrepancies could lead to confusion or errors in product selection, application, or performance evaluation, potentially impacting customer satisfaction, operational efficiency, and overall reliability of the information provided, which is critical for maintaining trust and ensuring that the correct specifications are communicated to all relevant stakeholders, including manufacturers, suppliers, and end-users who rely on accurate data for decision-making processes.
EPGT 040100 SH7025 Wendeplatten - Tungaloy
Taking advantage of the SH7025 coating and ISO conformity, this insert delivers robust cutting-edge stability and consistent performance in both external and internal turning operations; it is particularly economical where smaller tooling or variable engagement conditions are present. Order the insert directly via Metav Werkzeuge or ask the consultants for compatibility guidance. EPGT040100 SH7025 Turning insert for ISO turning — Tungaloy The EPGT040100 SH7025 is an ISO‑standard rhombic turning insert designed for external and internal turning, offering a tough, edge‑stable grade for small tools and changing engagement conditions. ISO rhombic insert format 04 Coated carbide grade SH7025 Cylindrical hole with single‑side countersink 11° relief angle for general turning Proven grade for variable engagement and small tools The SH7025 grade is a coated carbide developed for toughness and cutting‑edge stability, which reduces edge chipping under changing conditions. For operations that involve interrupted cuts or varying engagement, a tougher grade helps maintain a consistent tool life and reduces unplanned tool changes, improving uptime and process reliability. The coating enhances wear resistance while the substrate maintains fracture toughness; this balance supports productive turning even with smaller insert geometries. The result is a combination of reliability and cost efficiency in batch and job‑shop environments where tool change downtime is critical. Easy integration in ISO tooling systems for predictable results Designed to the ISO designation 040100, the insert integrates with standard holders when matched for shape, clearance angle, tolerance class, clamping method, size and thickness. The rhombic form with a nominal 75° included angle and 11° relief ensures predictable geometry for typical external and internal turning tasks. The central cylindrical hole with single‑side countersink (40°–60°) secures stable clamping and repeatable seating on compatible toolholders. By choosing the correct chipbreaker and matching the grade to the workpiece and machining stability, machinists can achieve consistent chip control and surface finish while keeping set‑up straightforward. Operational benefits, selection guidance and handling notes In practice, the insert provides improved process stability through a robust cutting edge and a one‑sided chipbreaker suited to many turning conditions. The nominal thickness of 1.59 mm and size designation 04 make it suitable for compact tool assemblies where rigidity is limited; selecting a holder that maximises support will extend tool life. For best results, pair the insert with a holder rated for the workpiece material and machining strategy, and prefer clamping systems that minimise micro‑movement. The EPGT040100 SH7025 insert balances wear resistance and toughness, enabling productive machining with fewer interruptions and more predictable tool economics. For tailored selection advice or to confirm holder compatibility, contact Metav Werkzeuge for guidance and ordering; Metav Werkzeuge can advise on the optimal chipbreaker and holder pairing for the intended turning application. Technical data Article number: 6967500 Manufacturer article number: 6967500 SKU manufacturer: TUN6967500 SKU: 6967500-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: EPGT040100 Facts Size: 04 Thickness: 1.59 mm Relief angle: 11° Included angle: 75° Hole style: cylindrical hole with single‑side countersink (40°–60°) Special features Grade/coating: SH7025 Material: coated carbide Shape: rhombic Chipbreaker: one‑sided Application: turning (external and internal) Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What turning operations is this insert suitable for? The EPGT040100 SH7025 Tungaloy insert (TUN6967500) is designed for both external and internal turning; it performs well in interrupted cuts and variable engagement scenarios when combined with an appropriate chipbreaker and rigid holder. How does the SH7025 grade affect performance? SH7025 is a tough, edge‑stable coated carbide grade that offers improved resistance to chipping and a durable cutting edge, helping to maintain productivity in changing cutting conditions with the EPGT040100 insert. Which holders are compatible with this ISO insert? Compatibility depends on matching the holder to the insert’s rhombic form, 11° relief, size 04 and thickness 1.59 mm, as well as the clamping arrangement; confirm fit by comparing shape, tolerance class and attachment method. Is the insert suitable for small‑tool assemblies? Yes; the geometry and tougher grade make it particularly suitable for smaller tooling where engagement conditions vary, provided that the chosen holder maximises support and rigidity. What chipbreaker should be selected? Select a chipbreaker that matches the workpiece material and machining stability; the insert features a one‑sided chipbreaker and will benefit from a chipbreaker optimised for the intended material and feed range. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040100 SH725 Wendeplatten - Tungaloy
Optimise turning performance with the combination of the tough, edge‑stable SH725 coated carbide and the ISO‑standard rhombic form for consistent results and extended tool life. Benefit from reliable chip control and straightforward integration into ISO tooling systems — order directly via Metav Werkzeuge or request application advice from our consultants. EPGT 040100 SH725 – ISO turning insert, rhombic, 75° | Tungaloy The EPGT040100 SH725 is an ISO‑standard rhombic turning insert engineered for external and internal turning under variable engagement conditions. Coated carbide grade SH725 Rhombic insert, 75° cutting angle 11° clearance for stable cutting Cylindrical hole with 40°–60° countersink Consistent edge stability for reliable production The SH725 grade is a coated carbide designed for toughness and edge stability, which translates into dependable tool life when machining under fluctuating loads or with smaller tool geometries. The combination of the coating and substrate improves wear resistance without sacrificing the toughness required to resist chipping during interrupted cuts. For production environments where repeatability matters, this results in fewer insert changes, reduced downtime and a more consistent surface finish — all key factors in maintaining throughput and reducing overall machining cost. Seamless integration into ISO tooling systems Compatibility with holder systems is determined by the insert’s form, clearance angle, tolerance class, attachment method, size and thickness; the rhombic shape and ISO designation ensure straightforward interchangeability in standard indexable toolholders. The 11° clearance angle and the 75° main cutting angle support a balance of strength and accessibility, making the insert suitable for diverse clamping options. Clear specification of these dimensions simplifies tool selection and helps to ensure optimal clamping and concentricity in typical lathe setups. Controlled chip formation and adaptability A single‑sided chipbreaker on this insert promotes predictable chip control, which reduces the risk of chip entanglement and improves surface integrity. Chipbreaker selection should match the workpiece material and machine rigidity; the SH725 grade performs well in conditions with variable engagement, where maintaining a stable cutting edge is essential. Good chip control not only improves operator safety but also supports automated or lights‑out operations by lowering the likelihood of stoppages due to poor chip evacuation. Practical guidance for application and selection The insert’s 1.59 mm thickness and ISO size 04 offer a compact solution that nevertheless provides sufficient edge support for many turning tasks. When selecting parameters, prioritise toolholder rigidity and correct seat tolerance to fully exploit the insert’s properties. The cylindrical hole with a 40°–60° single‑side countersink ensures secure fastening in many clamping systems. For best results, match the chipbreaker style and cutting data to the workpiece material and machine dynamics; small changes in feed or entry angle can materially extend life and improve finish. For dependable, repeatable turning with Tungaloy’s SH725 grade, contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737278-Tungaloy Manufacturer SKU: TUN6737278 Manufacturer article number: 6737278 Model series: ISO turning insert series Material: carbide Brand: Tungaloy Core specifications Cutting angle: 75° Clearance angle: 11° Thickness: 1.59 mm Size designation: 04 Hole: with hole Countersink angle: 40°–60° Features & applications Coated carbide grade SH725 Rhombic insert profile Single‑sided chipbreaker Cylindrical hole with single‑side countersink Compatible with ISO turning holders Intended for external and internal turning System composition: ISO insert, suitable external holder or boring bar, support/clamping set and replacement screws FAQ What machining tasks is this insert best suited to? The EPGT040100 SH725 insert is intended for external and internal turning where a tough, edge‑stable grade is required, particularly in smaller tool geometries or where engagement conditions vary. Which holders are compatible with this insert? Compatibility depends on matching the insert’s form, clearance angle, tolerance class, attachment method, size and thickness to the holder; the ISO designation of the EPGT040100 SH725 supports use in standard ISO indexable turning holders. How does the chipbreaker affect performance? The single‑sided chipbreaker on the insert improves chip control and evacuation; when combined with the SH725 grade this reduces chip-related interruptions and supports a more consistent surface finish. Can the insert be used for interrupted cuts or variable engagement? Yes, the SH725 coated carbide is formulated for edge stability and toughness, making the insert suitable for applications with interrupted cuts or fluctuating engagement conditions. What role does the insert thickness play? The 1.59 mm thickness contributes to insert rigidity and edge support; in compact toolholders this thickness balances strength with the ability to reach constrained geometries. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
EPGT 040100 SH725 Wendeplatten - Tungaloy
Reliable machining results stem from the combination of a coated carbide SH725 grade and a secure, ISO‑compliant clamping interface, delivering stable cutting edges and consistent performance in turning operations. Order the EPGT040100 SH725 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. EPGT 040100 SH725 turning insert, rhombic 75° by Tungaloy The EPGT040100 SH725 Tungaloy turning insert is an ISO‑standard indexable insert designed for precision external and internal turning, optimised for stable edge life and variable engagement conditions Rhombic insert 04 with 75° cutting angle Coated carbide grade SH725 for stable edges 11° clearance angle, single-sided chipbreaker Centre hole with countersink (40°–60°), 1.59 mm thick Stable cutting performance for demanding turning tasks The EPGT040100 SH725 is built as a coated carbide indexable insert to provide stable cutting-edge behaviour across a range of engagement conditions. The SH725 grade is formulated for toughness and edge stability, which is particularly valuable when using smaller tools or when cutting conditions change frequently. This results in fewer interruptions for tool changes and a more predictable process flow. The single-sided geometry and chipformer selection contribute to consistent chip formation and repeatable surface quality in both external and internal turning. Assured system compatibility and secure clamping As an ISO‑standard insert, compatibility with holders is determined by a combination of form, 11° clearance angle, tolerance class, fastening method, size and thickness. The rhombic 04 form with a 75° cutting angle and a 1.59 mm plate thickness matches common seats in turning toolholders. The centre hole with a cylindrical bore and one‑sided countersink (40°–60°) ensures a precise, backlash‑free fit when combined with the correct clamping set and replacement screws, reducing the risk of movement under load and improving process reliability. Productivity advantages through chip control and tool life A single-sided chipbreaker teamed with the SH725 coating provides effective chip control while maintaining a robust edge. For series production or mixed batches where tool stability is variable, this combination helps to maintain cycle times and reduces scrap risk. The coating extends tool life by protecting the carbide substrate from thermal and abrasive wear, supporting higher uptime and more consistent part quality over longer runs. These factors contribute directly to improved shopfloor productivity. Practical selection tips for reliable results Select the chipbreaker and grade to match the workpiece material and stability of the set‑up: the single‑sided chipbreaker is suitable where controlled chip flow is required and where the holder orientation accommodates non‑reversible cutting edges. Verify holder seat geometry, clamp type and the ISO designation before fitting, and ensure the countersink angle of the clamping screw matches the insert bore for correct preload. For specific machining parameters or holder recommendations, consult technical data sheets or speak with the supplier to align cutting data with application goals. For technical advice, availability and ordering of Tungaloy SH725 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the optimal insert and holder combination for the application. Technical Data Article number: 6737287-Tungaloy Manufacturer SKU: TUN6737287 Manufacturer article number: 6737287 Brand: Tungaloy Model series: ISO turning indexable inserts Material: Carbide Core technical data Cutting angle: 75° Clearance angle: 11° Thickness: 1.59 mm Size: 04 Countersink angle: 40°–60° Special features Rhombic plate form Single-sided chipbreaker Cylindrical centre hole with one-sided countersink Coated carbide grade SH725 ISO‑standard indexable insert Application: turning FAQ What materials is this insert suitable for? The EPGT040100 SH725 insert is a coated carbide grade intended for a wide range of turning tasks; selection of the chipbreaker and cutting data should be matched to the specific workpiece material and machining stability. How is the insert secured in the holder? The insert uses a cylindrical centre hole with a one‑sided countersink (40°–60°) for positive clamping; correct pairing with the clamping screw and seat is essential for secure fixation of the EPGT040100 SH725. What distinguishes the SH725 grade from others? SH725 is a tough, edge‑stable coated carbide designed to maintain cutting edge integrity under variable engagements and to offer reliable performance with smaller tools or unstable set‑ups. Is the insert reversible or indexable on multiple edges? This insert features a single‑sided chipbreaker and a rhombic form; edge indexing is determined by the plate geometry and chipbreaker design, so check the insert face and holder orientation for valid index positions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040100 SH725 Wendeplatten - Tungaloy
Combine the coated carbide SH725 grade with ISO compatibility and an 11° relief for consistent, stable turning results; the rhombic geometry and single‑sided chipbreaker ensure good chip control and economy. Order the insert directly via Metav Werkzeuge or consult our advisers for the best holder and clamping arrangement. EPGT 040100 SH725 — Tungaloy turning insert, rhombic 04, 11° relief The EPGT040100 SH725 insert is an ISO rhombic turning insert intended for stable external and internal turning, optimised for small tools and varying engagement conditions. ISO‑standard rhombic 04 insert Coated carbide grade SH725 11° relief for stable cutting Cylindrical hole with 40°–60° countersink Consistent cutting performance for everyday turning The rhombic 04 geometry combined with the coated carbide grade provides a dependable solution for a wide range of turning tasks. Designed as an ISO‑standard indexable insert, this component delivers repeatable seating in standard holders and enables predictable cutting behaviour. The SH725 grade is formulated for toughness and edge stability, which reduces the risk of premature chipping when machining interrupted cuts or when using smaller diameter tools. The result is less downtime and a steadier production flow. Improved edge life and chip control where it matters A single‑sided chipbreaker tailored to the geometry facilitates controlled chip formation and evacuation during both external and internal operations. The combination of a tough substrate and a functional coating promotes wear resistance and sustained sharpness at the cutting edge, extending tool life and reducing insert changes. For shops seeking efficiency, the better edge retention of this grade translates into fewer machine stops and lower overall tooling consumption. Designed for secure clamping and broad compatibility Compatibility with holders is determined by form, relief angle, tolerance class, fixing, size and thickness. The 11° relief and the rhombic form make the insert suitable for a range of external holders and shank tools; the cylindrical hole with one‑side countersink (40°–60°) ensures secure fastening and simple replacement of screws. A complete working system includes the insert, a matching external holder or shank, a shim/clamping set and replacement screws — all selected to match the geometry and tolerance requirements for safe, repeatable clamping. Practical guidance for selecting the right grade and geometry When choosing an insert for turning, select the chipbreaker and grade according to material, machining type and stability of the setup. The SH725 grade is recommended for applications that demand toughness and reliable edge integrity, especially when conditions vary or when smaller tooling is used. With a plate thickness of 1.59 mm and a compact rhombic outline, this geometry supports fine finishing as well as general‑purpose turning tasks. Where high process stability and consistent surface quality matter, this insert offers a balanced compromise between economy and performance. For tailored recommendations on holders, clamping sets or to place an order for Tungaloy inserts, contact Metav Werkzeuge — our consultants will advise on the ideal combination for the machining task and supply the correct components Technical data Article number: 6737248 SKU: 6737248-Tungaloy Manufacturer SKU: TUN6737248 Model series: ISO turning inserts Label: EPGT040100 SH725 Tungaloy insert Facts Thickness: 1.59 mm Relief angle: 11° Included angle: 75° Size: 04 ISO code: 040100 Special features Grade SH725 (coated carbide) Rhombic insert geometry Single‑sided chipbreaker Cylindrical hole with one‑side countersink (40°–60°) For turning: external and internal turning System components: insert, external holder or shank, shim/clamping set and replacement screws Compatibility determined by form, relief, tolerance class, fixing, size and thickness FAQ Which materials can this insert machine effectively? The SH725 grade insert is a coated carbide design intended for a broad material range; the EPGT040100 insert performs well in general steel turning and situations requiring a tough cutting edge. Is the insert compatible with standard ISO turning holders? Yes — the EPGT040100 follows ISO insert geometry and fits holders that accept rhombic 04 inserts with an 11° relief and the specified fixing arrangement. What are the key benefits of the SH725 grade compared with other grades? SH725 emphasises toughness and edge stability, offering improved resistance to chipping and reliable performance in small‑tool or variable‑engagement conditions. How does the hole and countersink affect mounting? The cylindrical hole with a one‑side countersink (40°–60°) ensures secure clamping and easier screw seating, contributing to repeatable tool positioning and stable cutting forces. Can this insert be used for finishing passes? Yes — with its rhombic form and 1.59 mm thickness, the geometry supports fine finishing when the correct holder and cutting parameters are applied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040100 SH730 Wendeplatten - Tungaloy
Benefit from a combination of a tough SH730 coated carbide grade, ISO‑normed rhombic geometry and a precise 11° clearance that together ensure stable edge life and consistent turning performance. Order compatibility advice or place the insert via Metav Werkzeuge for quick supply and technical guidance. EPGT 040100 SH730 indexable turning insert (Tungaloy) The EPGT040100 SH730 is an ISO‑normed, rhombic indexable insert engineered for external and internal turning applications in industrial machining. ISO‑normed rhombic insert EPGT040100 Tough SH730 coated carbide grade 11° clearance for reliable chip control Cylindrical hole with one‑side countersink High‑performance grade for consistent tool life The combination of the SH730 coating and a wear‑resistant coated carbide substrate delivers improved edge stability under varying engagement conditions. This grade is formulated for a broad range of turning operations and is particularly suitable for smaller tool geometries or processes with fluctuating cutting engagement. The outcome is a predictable tool life and fewer insert changes, which supports continuous production and reduces unplanned downtime. Geometry and hole design that enhance clamping and stability The rhombic geometry with a 75° approach angle and an 11° clearance produces a favourable cutting orientation for many turning tasks, enabling controlled chip formation and surface finish. The insert’s cylindrical hole with a single‑side countersink (40°–60°) ensures a secure seat in standard ISO holders, reducing micro‑movement at the cutting edge. These features translate into stable cutting conditions and repeatable machining accuracy when paired with the correct holder and clamping set. Practical compatibility and selection guidance for turning operations Built to ISO dimensions, this indexable insert integrates into standard turning systems where form, relief angle, tolerance class, attachment method, size and thickness determine fit. The single‑sided chipbreaker supports predictable chip control; selecting a chipbreaker and grade aligned with workpiece material and component stability optimises results. For applications ranging from general turning to more demanding interrupted cuts, this insert offers a balance of process reliability and adaptability in production environments. For accurate holder matching and to ensure the best performance with the SH730 grade, contact Metav Werkzeuge for technical advice or to request compatible clamping kits — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6862166 Manufacturer SKU: TUN6862166 SKU: 6862166-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: EPGT040100 Core measurements Approach angle: 75° Clearance angle: 11° Plate thickness: 1.59 mm Size designation: 04 Special features Grade/coating: SH730 (coated carbide) Geometry: rhombic Chipbreaker: one‑sided Hole style: cylindrical hole + one‑side countersink (40°–60°) Intended use: Turning Compatibility: ISO turning insert holders FAQ What materials is this insert suitable for? The EPGT040100 SH730 insert is designed as a versatile coated carbide grade for general turning; material suitability depends on the selected chipbreaker and machining parameters. How does the 11° clearance affect machining? An 11° clearance reduces flank rubbing while maintaining support for the cutting edge, improving surface finish and tool life under typical turning loads. Is the insert compatible with standard ISO holders? Yes, the ISO‑normed geometry and the cylindrical hole with one‑side countersink make the insert compatible with standard ISO turning holders when form, size and tolerance class are matched. Which chipbreaker type is fitted and what benefit does it bring? The insert features a single‑sided chipbreaker, which assists in consistent chip control and is beneficial for many external and internal turning operations. How to identify the correct replacement for older setups? Match the insert designation, size (04), approach angle (75°) and hole style; the EPGT040100 SH730 indexable insert and the manufacturer SKU TUN6862166 help ensure the right replacement is selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040100 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a stable cutting edge and a coated carbide grade optimised for variable engagement to keep machining cycles efficient and predictable; order directly via Metav Werkzeuge or consult the team for application advice. EPGT 040100 SH730 Tungaloy turning insert — rhombic ISO 040100, 11° clearance The EPGT040100 SH730 Tungaloy is an ISO rhombic turning insert intended for external and internal turning operations where consistent edge stability and reliable chip control are required. ISO 040100 rhombic geometry SH730 coated carbide grade 11° clearance for secure cutting Cylindrical hole with countersink Increased productivity through a stable, coated grade The SH730 grade is a coated carbide formulation designed for turning applications that require a stable cutting edge under changing engagement conditions. The coating improves wear resistance and heat management so that the cutting edge retains geometry over longer intervals, which translates into fewer tool changes and smoother production flows. In practice, the result is more consistent component tolerances and reduced unscheduled downtime, especially when machining with compact tools or variable depths of cut. Secure clamping and ISO compatibility for predictable set-up Compatibility with standard holders is determined by form, clearance angle, tolerance class, fixation method, size and thickness; this rhombic insert conforms to the ISO standard for turning inserts and fits common external holders when the matching seat and screw are used. The 11° clearance reduces rubbing on the flank face and helps to maintain surface finish, while the 1.59 mm thickness and cylindrical hole with one-sided countersink (40°–60°) provide secure clamping and reliable repeatability in the toolpost. For shops that value quick changeovers and repeatable clamping, these design details make set-up both straightforward and dependable. Application focus and economical operation Specifically intended for turning, the insert features a single‑sided chipbreaker and a rhombic 04 format that balance chip control with cutting edge strength. The SH730 grade is engineered for toughness and edge retention, making it particularly suitable where tool engagement varies or where smaller tooling systems are used. Selecting this grade can be a cost-effective strategy: longer edge life reduces inventory turnover for inserts and can lower overall cutting costs while maintaining the quality of the finished component. Contact Metav Werkzeuge to review application suitability for the SH730 grade and confirm immediate availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6862196 Manufacturer SKU: TUN6862196 SKU: 6862196-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: EPGT040100 SH730 Tungaloy-Wendeplatte Core technical data ISO code: 040100 Size: 04 Thickness: 1.59 mm Clearance angle: 11° Insert angle: 75° Special features Coated carbide (beschichtetes Hartmetall) Grade: SH730 Rhombic insert shape Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Application: turning ISO‑standard turning insert; fits compatible holders FAQ What turning tasks is this insert best suited for? The EPGT040100 SH730 Tungaloy turning insert (SKU TUN6862196) is tailored for external and internal turning where a tough, edge‑stable grade is needed, particularly with smaller tools or varying engagement. Which holder characteristics are required for correct mounting? Correct mounting depends on holder form, clearance, tolerance class, fixation, size and thickness; secure clamping for this insert is achieved with a compatible ISO seat and the screw arrangement matching the cylindrical hole and countersink. How does the SH730 grade perform on differing materials? SH730 is a robust, edge-stable coated carbide developed for a broad range of turning tasks; it favours operations where toughness and stable edge retention are priorities, helping to extend tool life and maintain surface finish. What is the significance of the 11° clearance and 1.59 mm thickness? The 11° clearance reduces flank contact for improved surface finish and less rubbing, while the 1.59 mm thickness contributes to insert rigidity and reliable clamping in standard ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040100 SH730 Wendeplatten - Tungaloy
High cutting stability and consistent chip control result from the combination of the SH730 coated carbide grade and the rhombic 04 geometry, while the 11° relief and 75° included angle support use in compact tool assemblies; order the insert via Metav Werkzeuge or consult the technical team for holder compatibility and application advice. EPGT040100 SH730 — ISO turning insert for turning, Tungaloy EPGT040100 SH730 is an ISO-format indexable insert designed for general turning operations, optimised for small tools and variable engagement conditions. Coated carbide grade SH730 Rhombic 04 form, 75° included angle 11° relief with cylindrical hole and countersink Single-sided chipbreaker for variable engagements Stable cutting performance for demanding turning tasks The insert combines a coated carbide substrate with the SH730 grade to deliver stable cutting edges and predictable wear behaviour. The coating and substrate pairing prioritise toughness, so the insert resists chipping under interrupted cuts and varying depths of cut. In practice, this means longer effective tool life and fewer insert changes during production runs; the result is improved uptime and a more consistent surface finish on turned components. The design suits external and internal turning where tool engagement may fluctuate. Simple integration and secure clamping in ISO systems Built to ISO dimensions, the indexable insert features a rhombic 04 outline with a 75° included angle and 11° relief, enabling direct replacement in compatible holders. The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) that supports reliable clamping and accurate seat location in many standard toolblocks and boring bars. Compatibility depends on matching the insert form, relief angle, tolerance class, clamping method, size and thickness; verifying these parameters prevents misfit and ensures repeatable positioning for consistent machining results. Practical benefits that support productivity and flexibility A single-sided chipbreaker tailored to the grade and geometry improves chip control across a range of materials and cutting conditions, reducing cycle interruptions and easing chip evacuation in compact workspaces. With a nominal thickness of 1.59 mm, the insert is suitable for small-tool setups where limited radial or axial clearance is critical. For workshops seeking a balance of robustness and economy, the SH730 series is particularly effective on mixed batches and jobs that require quick insert changes without sacrificing edge security. Contact Metav Werkzeuge for application-specific recommendations and to source the Tungaloy EPGT040100 SH730 indexable insert; technical consultants are available by email or phone for holder compatibility and machining parameter optimisation. Technical data Article number: 6862145 SKU: 6862145-Tungaloy Manufacturer SKU: TUN6862145 Model series: ISO turning indexable inserts Name/Designation: EPGT040100 SH730 Tungaloy insert Facts Size: 04 Thickness: 1.59 mm Included angle: 75° Relief angle: 11° Hole: with cylindrical hole and one-sided countersink (40°–60°) Chipbreaker: one-sided Special features Coated carbide, grade SH730 Rhombic insert form ISO-standardised geometry for turning Designed for external and internal turning Compatibility depends on form, relief, tolerance, clamping, size and thickness FAQ What materials is this insert suited for? The EPGT040100 SH730 insert by Tungaloy is a coated carbide grade designed for a broad range of materials; the SH730 grade focuses on toughness and stable edge life for mixed applications in turning. How is the insert clamped in the toolholder? Mounting relies on the cylindrical hole with a one-sided countersink (40°–60°); correct clamping is achieved when the holder matches the insert form, size 04, relief angle and ISO tolerance class. Can this insert be used for internal turning? Yes, the ISO 040100 rhombic geometry and the single-sided chipbreaker allow the insert to be used in both external and internal turning applications when the holder provides adequate support and clearance. What are the identifying codes for ordering and replacement? Reference the Tungaloy designation EPGT040100 SH730, article number 6862145 and manufacturer SKU TUN6862145 when ordering or seeking replacements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040100 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated TH10 carbide grade and the stable rhombic 75° geometry for efficient external and internal turning; the ISO conformity ensures fast tool changes and predictable clamping. Order genuine Tungaloy indexable inserts through Metav Werkzeuge or consult our team for compatibility checks and supply options. EPGT 040100 TH10 ISO turning insert for turning (rhombic 75°, 11° relief) — Tungaloy A EPGT 040100 TH10 ISO turning insert engineered for external and internal turning, offering a rhombic 75° cutting geometry and an 11° relief angle for versatile indexable use ISO 75° rhombic geometry Uncoated TH10 carbide grade Cylindrical hole with 40°–60° countersink 1.59 mm plate thickness for stability Consistent geometry for predictable machining results The ISO rhombic 75° geometry provides a reliable cutting direction that is widely compatible with standard turning operations and reduces the need for special holders. Compatibility is determined by the insert form, 11° relief, tolerance class, fastening method, size and thickness, which together ensure repeatable positioning and simpler set‑up. As an indexable insert, it integrates into a system consisting of an insert, a matching external holder or boring bar, a shim/clamp set and replacement screws, allowing rapid replacement and minimised downtime during production. Low cutting forces and clean surfaces for non‑ferrous work The sharp, uncoated TH10 carbide grade is designed as a universal solution for non‑ferrous materials and applications where a bare cutting edge supports reduced cutting forces and improved surface quality. Lower cutting forces translate into less workpiece deformation and finer finishes, so downstream operations such as polishing or assembly become easier. The combination of the sharp edge and grade selection promotes efficient material removal while maintaining the surface integrity required for precision components. Secure clamping and repeatable indexing for reliable productivity Practical design details support dependable production: the insert is supplied with a cylindrical hole plus a single‑side countersink (40°–60°), which provides secure mechanical location and consistent clamping torque. The 1.59 mm plate thickness and single‑sided chipbreaker contribute to stable cutting behaviour during external and internal turning. Because the insert conforms to ISO dimensions and tolerance classes, holders and spare parts are interchangeable, reducing inventory complexity and helping to keep machining processes streamlined and cost‑effective. For a precise application check or to source genuine Tungaloy EPGT 040100 TH10 inserts, contact Metav Werkzeuge — available for technical advice and rapid supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Manufacturer item number: 6804309 Manufacturer SKU: TUN6804309 SKU: 6804309-Tungaloy Model series: ISO turning inserts Name: EPGT040100 TH10 Tungaloy insert Facts Cutting geometry angle: 75° Relief angle: 11° Plate thickness: 1.59 mm Plate size: 04 Plate form: rhombic Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Grade: TH10 Material: carbide Application: turning Special features Uncoated carbide cutting edge Single‑sided chipbreaker ISO‑standard indexable insert Sharp universal sort for non‑ferrous materials Compatibility determined by form, relief angle and tolerance FAQ What turning operations is this insert intended for? The EPGT 040100 TH10 insert is suitable for both external and internal turning operations, designed to deliver low cutting forces and clean surfaces in indexable turning setups. Which materials are best processed with this grade? The TH10 uncoated carbide grade is optimised for non‑ferrous materials and applications that benefit from a sharp, uncoated cutting edge for reduced cutting forces and improved surface finish. How is the insert located and clamped in the holder? The insert features a cylindrical hole and a single‑side countersink (40°–60°) to provide positive location and repeatable clamping when used with the correct holder and clamp set. Does this insert conform to ISO standards for interchangeability? Yes, the insert is an ISO‑standard indexable plate; dimensions, form and tolerance classes are specified to ensure compatibility with matching holders and tools. What are the main practical advantages of the EPGT 040100 TH10? Key benefits are the rhombic 75° geometry for versatile cutting directions, the sharp uncoated TH10 grade for clean finishes on non‑ferrous materials, and the secure cylindrical hole with countersink for reliable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com