EPGT 040100 TH10 Wendeplatten - Tungaloy
Benefit from the EPGT040100 insert's uncoated cemented-carbide TH10 for low cutting forces and its ISO-standardised rhombic geometry for reliable turning performance; order directly via Metav Werkzeuge or consult our specialists for application guidance. EPGT 040100 TH10 indexable insert for turning — Tungaloy EPGT040100 TH10 is an ISO-standard rhombic indexable insert designed for external and internal turning of non-ferrous materials, offering low cutting forces and clean surface finishes in a compact 04 size. ISO-standard indexable insert, rhombic 04 Uncoated cemented-carbide TH10 for low cutting forces 11° clearance angle for stable chip control Cylindrical hole with single-sided countersink 40°–60° Consistent compatibility reduces setup time and tooling costs The ISO designation and standardised geometry ensure straightforward interchangeability between holders and inserts. Because compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness, the ISO conformity of this insert simplifies inventory and reduces machine downtime. Choosing an ISO-standard insert avoids bespoke adaptations and speeds up changeovers, which improves machine utilisation and supports predictable production planning. Clean surfaces and low forces thanks to the TH10 uncoated grade The TH10 grade is an uncoated cemented-carbide formulation optimised for non-ferrous workpieces and applications where a sharp cutting edge yields lower cutting forces. Lower forces result in reduced tendency for built-up edge and finer surface quality on delicate components. Combined with the insert’s single-sided chipbreaker, the geometry helps produce consistent chips and reduces secondary finishing. For shops working with aluminium alloys and similar materials, this yields shorter cycle times and less scrap. Robust geometry and secure fastening for reliable turning results The insert’s rhombic 04 shape and 1.59 mm thickness provide a stable support area in the cutter pocket, while the 11° clearance angle helps control flank contact and wear. The cylindrical hole with a single-sided countersink (40°–60°) facilitates secure clamping and repeatable seating in compatible holders. With an approach angle of 75°, the cutting forces are distributed to favour stable cutting in both external and internal turning. These geometric choices promote predictable tool life and repeatable part quality when matched to the correct holder and operating parameters. Practical system approach for efficient tool management An ISO indexable insert functions as part of a system: the insert, the corresponding external holder or boring bar, the support shim or clamp kit, and spare screws. Selecting the right chipbreaker and the TH10 grade according to workpiece material and machining conditions ensures efficient chip control and consistent results. Clear identification (ISO designation and manufacturer SKU) enables rapid reordering and reduces the risk of assembly errors on the shop floor, supporting lean tool management and traceability. Contact Metav Werkzeuge for tailored application advice on the Tungaloy EPGT040100 TH10 indexable insert and to confirm current availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6829478 Manufacturer SKU: TUN6829478 SKU: 6829478-Tungaloy Model series: ISO turning indexable inserts Product code: EPGT040100 Material: cemented carbide Grade: TH10 Core Data Thickness: 1.59 mm Size: 04 Clearance angle: 11° Approach angle: 75° Hole style: cylindrical hole with single-sided countersink (40°–60°) Special features Rhombic insert geometry Single-sided chipbreaker Uncoated cemented-carbide grade for non-ferrous materials ISO-standard insert for external and internal turning Compatibility determined by form, clearance, tolerance class, fixing, size and thickness FAQ What materials is the insert suitable for? The EPGT040100 TH10 indexable insert is designed primarily for non-ferrous materials and applications where a sharp, uncoated edge gives the best surface finish. Is the cutting edge coated? No, this insert uses an uncoated cemented-carbide grade (TH10) to deliver low cutting forces and clean cut surfaces. How is the insert secured in the holder? Clamping is via a cylindrical hole with a single-sided countersink (40°–60°); compatibility with a holder depends on the insert form, clearance angle, tolerance class, fixing method, size and thickness. Which operations are typical for this insert? Typical applications include external and internal turning, where the rhombic 04 geometry and single-sided chipbreaker support predictable chip control and surface quality. What are the key dimensions and designation for ordering? Designation: EPGT040100; Size: 04; Thickness: 1.59 mm; Clearance: 11°; SKU: 6829478-Tungaloy Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040101 SH7025 Wendeplatten - Tungaloy
Benefit from the tough, coated carbide SH7025 and the precise 0.1 mm corner radius for consistent chip control and stable edge life — order matching inserts and holders directly via Metav Werkzeuge or consult our specialists for application advice. EPGT 040101 SH7025 ISO rhombic turning insert by Tungaloy — 75° cutting geometry, 11° relief The EPGT 040101 SH7025 is an ISO-standard rhombic turning insert designed for general external and internal turning applications where a tough, edge-stable grade is required. Coated carbide grade SH7025 Rhombic 04 geometry, 75° cutting angle 0.1 mm corner radius Cylindrical hole with 40°–60° countersink Durable grade optimised for variable engagement The coated carbide designation SH7025 denotes a tough, edge-stable cutting grade developed for turning tasks where tool engagement can vary. This composition improves resistance to chipping during interrupted cuts and supports reliable performance on smaller tools. By combining a robust substrate with a protective coating, the insert delivers extended tool life and lower machining costs per part, making it a rational choice for production environments that value predictable wear behaviour and long tool cycles. Geometry and relief that support secure clamping and precise cutting The rhombic 04 form with a 75° cutting angle and an 11° relief angle provides a balance between strength and accessibility in confined turning operations. The modest 0.1 mm corner radius aids in producing consistent surface quality while reducing the risk of premature edge failure. The insert’s cylindrical hole with a single-side countersink (40°–60°) ensures accurate seating and repeatable clamping forces when used with compatible ISO holders. These geometry features translate into stable cutting conditions, improved process reliability and easier tool changeover during batch production. Practical system compatibility and chip control for efficient turning Compatibility with the toolholder depends on form, relief angle, tolerance class, fastening arrangement, size and thickness; this insert is intended to be integrated into a system consisting of the ISO insert, a matched external holder or boring bar, a seating/clamp set and replacement screws. The single-sided chipbreaker directs chips away from the cutting zone, reducing recutting and facilitating chip evacuation — a clear operational benefit for improving cycle times and reducing manual post-process handling. For flexible operations where cutting conditions change, selecting the correct combination of chipbreaker and grade helps secure consistent production results. Contact Metav Werkzeuge for tailored advice on application of the Tungaloy SH7025 insert and to order matching holders and clamping sets: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 6967501 SKU: 6967501-Tungaloy Manufacturer SKU: TUN6967501 WPL designation: EPGT040101 Manufacturer: Tungaloy Facts Size: 04 Thickness: 1.59 mm Relief angle: 11° Insert angle: 75° Corner radius: 0.1 mm Special features Material: coated carbide (SH7025) Shape: rhombic (EPGT) Chipbreaker: single-sided Hole: cylindrical hole with single-side countersink (40°–60°) Application: turning (external and internal) FAQ What machining tasks suit this insert best? The EPGT 040101 SH7025 insert is designed for external and internal turning where a tough, edge-stable grade is required, particularly in operations with variable engagement or smaller tooling. How does the insert’s geometry affect performance? The rhombic form with a 75° cutting angle and 11° relief provides strength and access in turning, while the 0.1 mm corner radius supports consistent surface finish and reduced risk of edge chipping during interrupted cuts. How is compatibility with holders determined? Compatibility depends on the insert’s form, relief angle, tolerance class, fastening, size and thickness; correct pairing with ISO holders, clamp sets and screws is essential for repeatable clamping and process stability. What benefit does the single-sided chipbreaker provide? The single-sided chipbreaker on this insert improves chip control and evacuation, which reduces recutting and can shorten cycle times while enhancing operator safety and part quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040101 SH7025 Wendeplatten - Tungaloy
Take advantage of the ISO conformity, the SH7025 coated carbide grade and the compact rhombic geometry for consistent turning performance and reduced tool change frequency; order genuine Tungaloy inserts or consult Metav Werkzeuge for compatibility and application advice. EPGT 040101 SH7025 – coated carbide turning insert (ISO) by Tungaloy EPGT040101 SH7025 is an ISO-standard rhombic indexable insert developed for external and internal turning, offering a resilient cutting edge suited to variable engagement conditions. ISO-standard rhombic insert, size 04 Coated carbide grade SH7025 for stable edges 0.1 mm corner radius for fine turning Cylindrical hole with 40–60° countersink Proven cutting performance under changing conditions The SH7025 coated carbide grade delivers a tough, edge-stable performance that is particularly effective in smaller tool assemblies and when engagement conditions vary. This composition reduces the frequency of edge deterioration and supports a more consistent surface finish, which in turn lowers the number of tool changes and idle times on the shop floor. The result is a measurable increase in process uptime and predictable component quality, especially in medium- to high-volume turning operations. Geometry designed for reliable clamping and accessibility A rhombic 04 form with a 75° main angle and a 0.1 mm corner radius provides a balance between profile accuracy and cutting robustness. The insert’s 11° clearance angle and 1.59 mm thickness support stable seating in compatible holders, while the cylindrical hole with single-sided countersink (40°–60°) ensures secure clamping and correct axial positioning. These geometric details make indexing straightforward and maintain repeatable cutting lines, which is essential when switching between holders or when tight tolerances are required. Simple system integration for turning tasks As an ISO indexable component, the insert integrates into a system comprising a matching external holder or boring bar, a backing shim or clamp set, and standard replacement screws. The single-sided chipbreaker supports controlled chip formation for turning applications, and the grade selection should be matched to workpiece material and machining stability for best results. For external and internal turning tasks, selecting the appropriate chipformer and cutting data will optimise cycle times and tool life without the need for specialised fixtures. Consistent productivity and dependable supply chain Using an ISO-standard, coated carbide insert from a recognised manufacturer reduces process variance and supports predictable throughput across production runs. The combination of standard dimensions and a resilient grade minimises setup errors and assists with rapid recovery after tool indexing. For manufacturers seeking production reliability, the insert’s design and material characteristics contribute to lower scrap rates and steadier machining performance. If a specific holder or machining scenario requires verification, Metav Werkzeuge can provide application-focused guidance based on shop-floor conditions. For application advice or to source genuine Tungaloy EPGT040101 SH7025 inserts, contact Metav Werkzeuge for tailored recommendations and order support. Technical data Article number: 6967488 Manufacturer SKU: TUN6967488 Manufacturer item number: 6967488 Model series: ISO-Drehwendeschneidplatten Facts Shape/size: rhombic, 04 Thickness: 1.59 mm Clearance angle: 11° Included angle: 75° Corner radius: 0.1 mm Special features Grade/coating: SH7025 (coated carbide) Hole: with cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: turning System components: ISO insert, suitable external holder or boring bar, backing shim/clamp set, replacement screws FAQ What materials is this insert suited for? The EPGT040101 SH7025 turning insert by Tungaloy is a coated carbide grade designed for versatile turning; the SH7025 grade is chosen to provide edge stability across a broad range of machining conditions, making it suitable when tool robustness is required. How does the 0.1 mm corner radius affect the turning result? A 0.1 mm corner radius on the EPGT040101 SH7025 insert improves finish in fine turning operations and reduces the risk of profile chatter, while still allowing for precise contouring where smaller radii are required. Is the insert compatible with different holder types? Compatibility depends on holder geometry, clearance angle and size; the ISO form and 1.59 mm thickness of the EPGT040101 SH7025 ensure it fits standard ISO holders of size 04 when form, fastening method and tolerance class match. What is the benefit of the cylindrical hole with countersink? The cylindrical hole with 40°–60° countersink ensures accurate axial positioning and secure clamping of the EPGT040101 SH7025 insert, enhancing repeatability and reducing the likelihood of insert movement under cutting forces. How should the chipbreaker be selected for specific turning tasks? Choose the chipbreaker and SH7025 grade according to workpiece material, cut depth and machine stability; the single-sided chipbreaker on this insert promotes controlled chip formation for many turning operations, but optimisation of feeds and speeds is recommended for best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040101 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH725 for edge stability and the ISO rhombic form for straightforward holder compatibility; order or request advice via Metav Werkzeuge for reliable turning performance. EPGT 040101 SH725 EPGT turning insert (ISO 040101) by Tungaloy — coated carbide, 11° relief The EPGT040101 SH725 is an ISO‑form rhombic turning insert designed for external and internal turning, featuring a single‑sided chipbreaker and a cylindrical mounting hole with a 40°–60° countersink. ISO rhombic insert, size 04 Coated carbide grade SH725 11° relief angle for stable cutting Cylindrical hole with 40°–60° countersink Reliable cutting performance with a stable grade The coated carbide grade SH725 is formulated for edge stability and dependable wear behaviour during turning, making it especially suitable for operations with varying engagement or for smaller tooling systems. Thanks to the coated carbide construction, the insert maintains cutting integrity under intermittent cuts and light to moderate machining forces. This results in fewer indexings, consistent component dimensions and reliable process repeatability, helping to reduce downtime and tool handling. Clear mounting criteria for secure clamping The insert conforms to the ISO designation EPGT040101, which streamlines compatibility checks with external holders and boring bars. Compatibility depends on form, 11° relief, tolerance class, clamping method, size and thickness, so matching the ISO rhombic geometry and the 1.59 mm thickness ensures a secure fit. The cylindrical hole with a single‑side countersink (40°–60°) provides positive seating and reproducible clamping when used with the appropriate shim and screw set, improving concentricity and repeatable positioning in production setups. Geometry tuned for surface and edge control The 0.1 mm corner radius on this insert balances edge strength with the ability to achieve fine surface finishes on turned parts. Combined with the single‑sided chipbreaker, the geometry encourages predictable chip formation and evacuation for many turning operations. Selecting the correct chipbreaker and grade relative to the machining conditions optimises chip flow and cutting forces; this in turn supports stable cutting, consistent surface quality and longer tool life, which are central to efficient production workflows. System approach and practical use This ISO turning insert is intended to be used as part of a system: the insert itself paired with a suitable external holder or boring bar, plus shim/clamp sets and replacement screws where required. The model series is designed so that the user can choose the chipbreaker and grade best suited to the workpiece and process stability. For routine workshop implementation, the combination of the EPGT040101 geometry and the SH725 coating simplifies inventory management while offering flexibility across a range of turning tasks. Contact Metav Werkzeuge for availability and technical guidance on integrating Tungaloy SH725 inserts into existing tooling systems, including advice on holder matching and process optimisation Technical data Article number: 6737291 SKU: 6737291-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: EPGT040101 Brand: Tungaloy Key dimensions Size: 04 Thickness: 1.59 mm Corner radius: 0.1 mm Relief angle: 11° Included angle: 75° Special features Coated carbide Grade SH725 Rhombic plate form Cylindrical hole with single‑side countersink (40°–60°) Single‑sided chipbreaker Intended use: Turning System components: insert, holder/boring bar, shim/clamp set, spare screws FAQ What holders are compatible with this insert? The EPGT040101 geometry requires holders that accept ISO rhombic inserts of size 04 with 11° relief; ensure the clamp and tolerance class match the EPGT040101 SH725 for correct seating. Which machining tasks is the SH725 grade intended for? The SH725 coated carbide grade is intended for turning operations where edge stability is required, particularly useful for smaller tools and changing engagement conditions. How does the corner radius affect the turned surface? A 0.1 mm corner radius gives a compromise between edge strength and surface finish; it supports controlled cutting forces and helps achieve consistent surface quality on turned components. What is the purpose of the countersunk hole design? The cylindrical hole with a 40°–60° single‑side countersink provides positive seating and reproducible clamping when used with the correct shim and screw set, improving repeatability in production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040101 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 coated carbide for consistent cutting-edge stability and ISO compatibility for fast integration into existing tooling systems; the result is efficient, predictable turning with reduced set-up time. Order the insert directly via Metav Werkzeuge or contact our consultants for machining advice. EPGT 040101 SH725 – Tungaloy turning insert, coated carbide, 75° rhombic EPGT040101 SH725 is an ISO-design rhombic turning insert for general external and internal turning, engineered for stable cutting-edge performance under variable engagement conditions ISO rhombic 75° insert SH725 Coated carbide for edge stability Cylindrical hole + 40°–60° countersink 0.1 mm corner radius, 1.59 mm thick Reliable cutting performance for variable engagement The SH725 coated carbide grade provides consistent edge stability even when engagement conditions change, making it suitable for shorter tools or interrupted cuts. The composition of the grade is optimised for toughness and wear resistance, which translates into fewer unplanned tool changes and more predictable cycle times. Selecting a grade that balances toughness and hardness reduces the risk of chipping and supports stable chip formation, improving process reliability and component finish. Fast integration into ISO tooling systems and secure clamping As an ISO-conforming rhombic insert, this item ensures straightforward compatibility with standard external holders and boring bars. The geometry—75° insert angle, 11° clearance, and a 0.1 mm corner radius—facilitates reliable positioning and repeatable results. The cylindrical hole with one-sided countersink (40°–60°) enables positive clamping with common screws and subplates, shortening fixture set-up and minimising repositioning. Clear, standardised interfaces reduce downtime when replacing inserts and support consistent batch production. Practical application advice and system composition Designed for turning applications, the insert features a single-sided chipbreaker that suits many general turning tasks; the correct chipbreaker and grade should be chosen to match the workpiece material and the machining stability. Typical systems comprise the insert, a matching external holder or boring bar, a shim or clamp set and replacement screws; this arrangement ensures repeatable tool location and secure fastening. If the intended workpiece material or cutting conditions are unclear, our technical team can advise on the suitable chipbreaker and cutting parameters to achieve the desired surface quality and tool life. For machining operations requiring dependable edge stability with SH725 performance, contact Metav Werkzeuge for tailored advice or to order the insert—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737280 Manufacturer SKU: TUN6737280 SKU: 6737280-Tungaloy Core specifications ISO designation: EPGT040101 Size: 04 Thickness: 1.59 mm Insert angle: 75° Clearance angle: 11° Corner radius: 0.1 mm Design and special features Rhombic insert form, ISO standard Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Coated carbide grade SH725 For external and internal turning; compatible with ISO holders FAQ What materials is this insert intended for? The EPGT040101 SH725 insert is a coated carbide grade designed for general turning tasks; the final selection of chipbreaker and cutting data should match the workpiece material and machining stability. How is the insert clamped in the holder? Clamping is achieved via the cylindrical hole with a one-sided countersink (40°–60°); this geometry provides secure, repeatable seating in compatible ISO external holders and boring bars. What does the 0.1 mm corner radius mean for surface finish? A 0.1 mm corner radius reduces cutting forces at the edge and helps to produce a finer surface finish on turned parts, while still offering sufficient strength for many general turning operations. Is this insert suitable for interrupted cuts? The SH725 grade is formulated for edge stability and toughness, making it suitable for applications that involve intermittent engagement, especially when used with appropriate clamping and cutting parameters. Which components are needed in addition to the insert for a complete tooling setup? A complete system normally includes a compatible holder or boring bar, a shim/clamp set and replacement screws; these parts ensure correct seating and secure fastening for repeatable machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040101 SH725 Wendeplatten - Tungaloy
Take advantage of a tough, coated carbide SH725 grade combined with an ISO‑standard rhomboid geometry and precise 0.1 mm nose radius for consistent turning performance; order directly via Metav Werkzeuge or consult our specialists for compatibility and availability. EPGT 040101 SH725 — Rhomboid ISO turning insert, coated carbide, Tungaloy The EPGT040101 SH725 is an ISO‑standard rhomboid indexable insert designed for external and internal turning, offering a robust 75° cutting geometry and a single‑sided chipbreaker for controlled chip formation. ISO‑standard rhomboid insert Coated carbide grade SH725 75° cutting geometry for robustness 0.1 mm nose radius for fine finishing High productivity through a tough, edge‑stable grade The SH725 coated carbide grade is formulated for edge stability and reliable wear behaviour during turning operations, especially where engagement conditions vary. As a result, process security is improved and tool changes are less frequent, which supports higher machine utilisation. The combination of a coated carbide SH725 grade with an ISO‑conform insert geometry enables reproducible results across batches and shortens setup verification time, delivering tangible gains in production efficiency. Precise geometry that improves surface quality and repeatability A small 0.1 mm nose radius and a 75° cutting angle produce a balance between fine surface finish and cutting edge robustness. The 11° relief angle reduces rubbing on the flank while maintaining contact stability, and the 1.59 mm plate thickness contributes to stiffness in thin‑walled or intricate holders. Together these geometric parameters reduce vibration and chatter, which translates directly into improved surface finish and tighter dimensional repeatability for turned profiles. Simple integration in ISO tool systems and secure clamping Compatibility with the clamping system is determined by form, relief angle, tolerance class, fastening style, size and thickness. The insert features a cylindrical hole + single‑side countersink (40°–60°) that ensures accurate seating and secure torque transmission when combined with the appropriate holder, shim and clamping set. Using standard ISO‑type inserts in matched holders shortens tool preparation and supports predictable changeovers, making the component suitable for mixed‑batch manufacturing and flexible production cells. Reliable chip control and suitability for variable cutting conditions The single‑sided chipbreaker design assists controlled chip formation under a range of feeds and depths of cut, reducing the risk of long curled chips that can affect process safety. The SH725 grade is described as a tough grade engineered for stable cutting edges, which is particularly beneficial for smaller tooling or operations where engagement varies. This combination provides a dependable balance between wear resistance and fracture toughness, helping maintain cycle times and lowering the frequency of unexpected interventions. For process‑secure turning with Tungaloy SH725 inserts, contact Metav Werkzeuge for tailored advice or to arrange supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options Technical Data Manufacturer article number: 6737279 SKU: 6737279-Tungaloy Manufacturer SKU: TUN6737279 Label: EPGT040101 SH725 Tungaloy-insert Model series: ISO turning inserts Core specifications Size: 04 Thickness: 1.59 mm Relief angle: 11° Cutting angle: 75° Nose radius: 0.1 mm Materials & features Material: coated carbide (SH725) Shape: rhombic Hole: with hole; cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Application: turning (external and internal) FAQ What is the primary application for this insert? The EPGT040101 SH725 Tungaloy insert is intended for external and internal turning operations, where stable edge behaviour and reproducible chip control are required. How is compatibility with a toolholder determined? Compatibility depends on form, relief angle (11°), tolerance class, fastening method, size (04) and thickness (1.59 mm); adherence to the ISO standard simplifies selection of a matching holder. What does the SH725 designation indicate? SH725 denotes a coated carbide grade formulated for toughness and cutting‑edge stability, suitable for smaller tooling and changing engagement conditions. How does the 0.1 mm nose radius affect the turned surface? A 0.1 mm nose radius produces finer surface finish and more accurate contouring while keeping the cutting edge robust enough for general finishing and light profiling tasks. Why is the hole style relevant for clamping? The cylindrical hole with a single‑side countersink (40°–60°) ensures precise seating and reliable clamping torque transmission, reducing the risk of insert movement during heavy cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040101 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide durability, precise ISO 040101 geometry, and a secure cylindrical mounting with countersink for reliable turning results in batch and single-part production. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. EPGT 040101 SH730 — Turning indexable insert by Tungaloy EPGT 040101 SH730 is a rhombic, ISO-format indexable insert designed for versatile external and internal turning applications. Coated carbide grade SH730 for edge stability ISO 040101 rhombic insert, size 04 Single-sided chipbreaker for predictable chips Cylindrical hole with 40°–60° countersink Efficient cutting performance with a tough coated carbide grade The rhombic indexable insert is manufactured from carbide and finished with the SH730 coating, a grade optimised for edge stability under variable engagement conditions. The combination of the 11° clearance and a 0.1 mm corner radius delivers a balance between cutting strength and surface integrity, which supports stable turning when alternating between light and heavier cuts. These characteristics reduce the risk of premature edge chipping and contribute to consistent tool life, making the insert suitable for productive machining of a wide range of components. Secure clamping and simple system integration for reliable set-ups This ISO-format insert fits into common holder systems provided the shape, clearance angle, tolerance class, fixing, size and thickness match the holder specifications. The cylindrical hole with a single-sided countersink (40°–60°) ensures positive seating and repeatable positioning when combined with the appropriate clamping kit and screws. In a standard system build—indexable insert, compatible external holder or boring bar, support shim and retaining screws—this geometry supports fast tool changes and repeatable set-ups, reducing downtime and improving process stability across batch runs. Predictable chip control and broader material coverage for productive turning The single-sided chipbreaker design, together with the SH730 grade, enables controlled chip formation and evacuation during common turning tasks; this results in steady cutting forces and improved surface finishes. The insert’s 1.59 mm thickness and ISO 040101 format make it especially suitable for smaller tool assemblies or applications with varying entry conditions where robust cutting edges and stable chip control are required. The result is a measurable improvement in process efficiency and fewer interruptions for tool changes, which supports higher throughput and consistent part quality. Contact Metav Werkzeuge for availability, application guidance and to discuss the best holder-and-insert combination for specific turning tasks; Metav Werkzeuge can advise on inserting the Tungaloy EPGT 040101 SH730 into existing tool systems. Technical data Article number: 6862156 Manufacturer SKU: TUN6862156 Model series: ISO-Drehwendeschneidplatten Label: EPGT040101 SH730 Tungaloy-Wendeplatte Data Size: 04 Thickness: 1.59 mm Corner radius: 0.1 mm Clearance angle: 11° Geometry angle: 75° ISO code: 040101 Special features Material: carbide Coating / grade: SH730 Plate shape: rhombic Chipbreaker: single-sided Mounting: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: turning System components: insert, external holder/boring bar, shim/clamp, replacement screws FAQ What materials is this insert suitable for? The Tungaloy EPGT 040101 SH730 indexable insert is a coated carbide grade intended for a broad coverage of turning tasks; the SH730 composition offers good edge stability across many steels and mixed conditions. How is the insert secured in the holder? The insert uses a cylindrical hole with a 40°–60° countersink, which ensures stable seating when combined with the correct clamp and screw in a compatible ISO 040101 holder. Can this insert be used for internal and external turning? Yes, the ISO-format EPGT 040101 SH730 is suitable for both external and internal turning when mounted in the appropriate external holder or boring bar and when the correct chipbreaker is chosen for the operation. What benefits does the SH730 grade bring to machining? The SH730 coated grade is engineered for toughness and edge stability, reducing edge chipping under variable cutting conditions and supporting longer, more reliable tool life in turning processes. Which holder features must be matched for correct compatibility? Compatibility is determined by shape, clearance angle, tolerance class, fixing, size and thickness; ensure the holder matches the ISO 040101 geometry and the 1.59 mm plate thickness for safe and repeatable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040101 SH730 Wendeplatten - Tungaloy
Benefit from the tough, edge-stable SH730 grade and the compact rhombic 04 geometry to maintain steady cutting conditions and consistent tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. EPGT 040101 SH730 — Tungaloy ISO turning insert, rhombic 04, coated carbide The EPGT 040101 SH730 is a rhombic ISO turning insert designed for external and internal turning, offering a robust option where small tools or variable engagement demand reliable edge stability. Coated carbide grade SH730 Rhombic 04 geometry, compact profile 11° relief angle for stable cutting Cylindrical hole with 40°–60° countersink Reliable edge stability for short-cycle turning The combination of the SH730 composition and a coated carbide substrate provides a balance of toughness and wear resistance, making the insert particularly effective in applications with changing engagement or interrupted cuts. This edge-stable grade was developed to reduce edge chipping and maintain consistent cutting performance, which in turn supports more predictable machining cycles and lower scrap rates. The result is improved process reliability for repetitive external and internal turning tasks. ISO conformity and simple system integration Manufactured to ISO dimensions, compatibility with the chosen holder depends on geometry, 11° relief angle, tolerance class, clamping method, size and 1.59 mm thickness. The insert forms part of a complete system that includes an ISO insert seat, a matching external holder or boring bar, a shim/clamp set and replacement screws. Specifying the correct holder and clamping hardware ensures secure seating and repeatable tool life, helping to preserve surface finish and dimensional accuracy during production runs. Practical machining benefits and chip control The compact rhombic 04 shape and one-sided chipbreaker deliver effective chip control for many turning operations while the small 0.1 mm radius helps to balance corner strength with fine edge definition for improved surface quality. The cylindrical hole with a single-side countersink (40°–60°) provides straightforward clamping and reliable location in the pocket, reducing the risk of insert movement under load. These characteristics support steady material removal rates without unnecessary vibration or premature wear. Guidance for selecting the right insert configuration Choose the chipbreaker and grade according to workpiece material, feed and depth of cut, and the rigidity of the tool assembly; the SH730 grade is recommended for situations requiring a tough, chip-resistant edge, especially in small-tool applications or variable engagement. If further specification data or cutting-parameter recommendations are required, the technical team can offer application-focused guidance to align insert choice with production goals and machine capability. Discuss availability and application suitability with Metav Werkzeuge — contact Metav Werkzeuge for expert advice and assistance: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6862136 Manufacturer SKU: 6862136-Tungaloy Designation: EPGT040101 Material: carbide Grade/coating: SH730 Application: turning Plate form: rhombic Plate size: 04 Plate thickness: 1.59 mm Facts Relief angle: 11° Shape angle: 75° Corner radius: 0.1 mm ISO code: 040101 Special features Coated carbide (SH730) Rhombic 04 geometry Cylindrical hole with single-side countersink 40°–60° One-sided chipbreaker ISO-conforming turning insert Recommended for small tools and variable engagement FAQ What turning operations is this insert intended for? The EPGT040101 SH730 turning insert from Tungaloy is intended for external and internal turning and is particularly suitable where small tools or variable engagement conditions are present. Which features improve reliability under interrupted cuts? The SH730 grade and coated carbide construction give the insert enhanced edge stability, reducing chipping risk during interrupted or variable-engagement cuts. What are the key dimensions to check when selecting a holder? Check form, 11° relief angle, tolerance class, clamping method, 1.59 mm thickness and plate size 04 to ensure the insert seats correctly in the chosen holder. How does the chipbreaker affect machining? The one-sided chipbreaker promotes consistent chip formation and evacuation, aiding surface finish and reducing the likelihood of chip-related tool issues. What does the hole configuration specify for clamping? The cylindrical hole with a single-side countersink (40°–60°) provides positive location and stable clamping in compatible ISO pockets. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040101 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide grade engineered for edge stability, a compact rhombic 04 geometry that supports robust turning, and a secure clamping design for consistent repeats in production. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. EPGT 040101 SH730 Turning insert by Tungaloy — 75° rhombic 04, coated carbide EPGT 040101 SH730 is an ISO-format turning indexable insert designed for precision external and internal turning in standard holder systems ISO rhombic insert EPGT 040101 SH730 75° geometry for robust external turning Coated carbide grade SH730 for stable edge Cylindrical hole with 40°–60° one-sided countersink Stable cutting edges for mixed entry conditions The coated carbide grade SH730 is formulated for edge toughness and consistent performance under varying engagement conditions. As a consequence, insert life is extended where feed or depth of cut varies and where intermittent cuts occur. The result is fewer tool changes and improved process reliability. The coating supports heat resistance and wear control while the substrate delivers the toughness needed for small tools and unstable cut conditions. Geometry that balances strength and finish A 75° cutting geometry combined with the rhombic 04 form gives a robust edge line suited to general and heavy-facing cuts while still permitting accessible approach angles for external operations. The 0.1 mm corner radius provides a compromise between strength and surface finish, enabling consistent part tolerances. The 11° clearance reduces flank contact and heat generation, helping to maintain dimensional accuracy and surface quality with lower risk of rubbing. Secure clamping and ISO compatibility for predictable results Clamping is facilitated by a cylindrical hole with a one-sided countersink (40°–60°) that ensures positive seating in common ISO-compatible holders. The insert thickness of 1.59 mm and single-sided chipbreaker design contribute to stable chip control and mechanical security under load. Compatibility with a holder is determined by matching form, clearance angle, tolerance class, clamping method, size and thickness, so selection within the ISO system yields reproducible cutting conditions and simplifies tool inventory. Discuss how the Tungaloy SH730 grade can improve machining stability with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and application support Technical data Article number: 6837461 Manufacturer SKU: TUN6837461 Our SKU: 6837461-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Numbers / Facts ISO designation: 040101 Insert size: 04 Cutting angle: 75° Clearance angle: 11° Corner radius: 0.1 mm Thickness: 1.59 mm Special features Coated carbide (SH730) Rhombic insert form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Suitable for external and internal turning Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ What operations is this insert intended for? The insert is intended for external and internal turning operations; the EPGT 040101 SH730 insert suits general turning tasks within ISO holder systems. What material and grade is used for the cutting substrate and coating? This insert is made from coated carbide in the SH730 grade, designed for edge stability and good wear resistance under mixed cutting conditions. How is the insert secured in the toolholder? The insert uses a cylindrical hole with a one-sided countersink (40°–60°) to ensure reliable seating and clamping in compatible ISO toolholders. Which geometry features influence surface finish and strength? The 75° geometry, 0.1 mm corner radius and 11° clearance combine to balance cutting strength and surface quality, enabling controlled finishing while maintaining edge robustness. What does the ISO code 040101 indicate? The ISO code reflects the standardised geometry and size within the ISO system: the designation 040101 corresponds to the rhombic 04 form and the specified geometric parameters used for matching holders and tool systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040101 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of low cutting forces, a clean, sharp uncoated edge and ISO conformity for consistent turning performance; order the insert through Metav Werkzeuge or consult our technical team for process-matched advice. EPGT 040101 TH10 — Indexable turning insert for turning by Tungaloy The EPGT040101 TH10 is an ISO rhombic indexable insert designed for external and internal turning, providing a sharp uncoated carbide cutting edge optimised for non‑ferrous materials. ISO rhombic insert EPGT040101 TH10 Uncoated carbide for low cutting forces Suitable for non‑ferrous materials and finishing Cylindrical hole with single‑side countersink Consistent, low‑force cutting for cleaner surfaces The rhombic geometry with a 75° included angle and the fine 0.1 mm corner radius deliver precise engagement and reduced radial forces, which helps to preserve workpiece integrity when machining softer alloys. The TH10 uncoated carbide grade supports a clean surface finish and lower friction at the cutting edge, making it advantageous for operations where minimal cutting forces and good surface quality are priorities. This combination reduces vibration risk and promotes steady tool life in finishing passes. Secure clamping and broad holder compatibility As an ISO‑standard insert, compatibility depends on the insert form, 11° clearance angle, tolerance class, fastening method, size and thickness. The central cylindrical hole with a single‑side countersink (40°–60°) ensures reliable seating and repeatable clamping in compatible external holders and boring bars. Clear mechanical fitment reduces set‑up time and improves repeatability across batches, enabling reliable interchangeability between holders manufactured to ISO norms. Process efficiency and system considerations This insert integrates into a system comprising the ISO indexable insert, a matched external holder or boring bar, a support pad/clamp set and replacement screws. The 1.59 mm plate thickness and single‑sided chipbreaker suit light to medium cutting regimes, while the uncoated cutting edge excels where minimal built‑up edge formation is required. Select the chipbreaker and grade to match material, machining stability and desired surface finish; the right pairing improves throughput and lowers overall machining cost per part. For machining tasks that prioritise low cutting forces and superior finish, contact Metav Werkzeuge for application advice and availability of the Tungaloy EPGT040101 TH10 insert — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6862171 Manufacturer SKU: TUN6862171 SKU: 6862171-Tungaloy Model series: ISO indexable turning inserts Designation: EPGT040101 TH10 Facts Insert size: 04 Included angle: 75° Corner radius: 0.1 mm Clearance angle: 11° Plate thickness: 1.59 mm Special features Material: carbide Grade: TH10 (uncoated) Chipbreaker: single‑sided Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Application: turning (external and internal) Geometry: rhombic FAQ What materials is this insert best suited for? The EPGT040101 TH10 insert is optimised for non‑ferrous materials and applications where an uncoated carbide edge supports low cutting forces and a clean surface finish. How does the insert secure in the holder? Clamping relies on the central cylindrical hole with a single‑side countersink; when used in an ISO‑compatible holder, the seating and fastening deliver repeatable clamping and stable cutting. Which geometry details affect performance? The rhombic 75° included angle, 0.1 mm corner radius and 11° clearance angle work together to reduce radial load, improve surface finish and limit edge loading during finishing operations. Can this insert be used for both external and internal turning? Yes, the insert is suitable for both external and internal turning when paired with the appropriate external holder or boring bar and the correct clamp/support components. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040101 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp uncoated cutting edge and a compact 75° rhombic form for efficient turning of non‑ferrous materials. Order the insert directly via Metav Werkzeuge or contact our consultants for process guidance and availability. EPGT 040101 TH10 indexable insert — uncoated carbide, 75° rhombic for turning (Tungaloy) The EPGT 040101 TH10 is an ISO‑standard rhombic indexable insert designed for general turning; its sharp, uncoated edge reduces cutting forces and supports clean surface finishes in non‑ferrous materials ISO‑standard rhombic 75° insert Uncoated carbide TH10 grade Single‑sided chipbreaker design Compatible with holders with 11° clearance High efficiency through a sharp, uncoated grade The focus of this insert is efficiency: the TH10 uncoated carbide grade provides a sharp cutting edge that reduces cutting forces and can produce a clean surface finish on non‑ferrous workpieces. For operations where lower cutting resistance and minimal built‑up edge are priorities, a sharp, uncoated grade frequently outperforms coated alternatives. The design is intended to deliver predictable tool life in applications such as light to medium roughing and finishing where chip control and surface quality matter. Controlled geometry for repeatable results Precision geometry creates the conditions for stable machining. The insert features a 75° rhombic form with a 0.1 mm nose radius and an 11° clearance angle, paired with a 1.59 mm thickness in size 04. These specifications yield a compact contact zone that supports dimensional consistency and predictable tool behaviour. The single‑sided chipbreaker helps to shape chips in a controlled manner, reducing vibration and improving turning stability when combined with an appropriate toolholder and setup. ISO compatibility and secure mounting As an ISO‑compliant indexable insert, compatibility with toolholders is governed by shape, clearance, tolerance class, attachment style, size and thickness. The system typically comprises the insert, a matching external holder or boring bar, and the required shim or clamp set plus replacement screws. Choosing a holder with the correct pocket geometry and clamping method ensures a secure interface, enabling repeatable seating and consistent cutting conditions throughout a production run. Best use cases and material recommendations This insert is optimised for turning operations on aluminium and brass and other non‑ferrous alloys, where a keen uncoated edge minimises cutting forces and avoids surface smearing. Select the single‑sided chipbreaker variant where chip evacuation in longitudinal turning is required and pair the grade with machining parameters that suit the workpiece alloy and rigidity of the setup. For less rigid configurations or interrupted cuts, consider adapting feeds and depths of cut to maintain edge stability and tool life. Practical selection and handling advice When selecting this insert, match the TH10 grade and chipbreaker to the workpiece material and the machine‑tool stiffness rather than relying solely on cutting speed charts. Store inserts in their original packaging to protect edges and inspect seating faces and the clamping interface before use. For detailed parameter recommendations, tooling options and application‑specific advice, technical datasheets and cutting parameter tables are available to support process optimisation and reduce trial‑and‑error at the machine. For application advice, availability and to request technical datasheets for the EPGT 040101 TH10 insert, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt consultation and stock information. Technical data Article number: 6862121 Manufacturer SKU: TUN6862121 SKU: 6862121-Tungaloy Core specifications Shape: rhombic, 75° Size: 04 Thickness: 1.59 mm Nose radius: 0.1 mm Clearance angle: 11° Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Features & applications Material: carbide Grade: TH10 (uncoated) Chipbreaker: one‑sided Application: turning Suitable for: non‑ferrous materials System: insert + external holder or boring bar; shim/clamp set and screws FAQ What materials is this insert best suited for? This insert in grade TH10 is best suited for non‑ferrous materials such as aluminium and brass; the TH10 uncoated carbide edge supports low cutting forces and good surface quality. How does the 75° rhombic form affect turning operations? The 75° rhombic geometry of the EPGT 040101 provides a compact contact area for stable turning and good edge strength while allowing access in many external and internal turning applications. What does the hole style mean for mounting? The cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping in compatible holders and supports repeatable seating for consistent cutting performance. Which chipbreaker should be chosen for interrupted cuts? For interrupted or less stable cuts, select a chipbreaker and feed that favour robust chip control and avoid overloading the sharp uncoated edge; the one‑sided chipbreaker on this insert assists chip shaping in longitudinal turning. Is an uncoated grade always preferable for aluminium? An uncoated TH10 grade is often preferable for aluminium because it reduces built‑up edge and cutting forces, but final selection should consider alloy, coolant use and machine rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
EPGT 040102 GH110 Wendeplatten - Tungaloy
Combining GH110 wear resistance with an ISO‑standard geometry and robust carbide construction yields reliable, repeatable turning performance and reduced tool changes. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. EPGT040102 GH110 — ISO turning insert, rhombic 04, 11° clearance (Tungaloy) The EPGT040102 GH110 is an ISO‑standard turning insert intended for external and internal turning, offering consistent chip control and durable cutting‑edge stability. ISO‑standard rhombic 04 format GH110 grade for wear resistance Cylindrical hole with 40°–60° countersink 11° clearance for secure cutting Consistent performance through material and grade The insert is manufactured from carbide, combined with the GH110 Tungaloy grade to balance wear resistance and toughness. This composition reduces flank and crater wear under typical turning conditions, which in turn prolongs tool life and lowers operating costs through fewer indexings and replacements. The use of a proven grade ensures stable cutting edges, especially where interrupted cuts or variable feed rates challenge conventional grades. For production environments prioritising uptime, the technical choice of substrate and grade translates directly into predictable maintenance intervals and steady output quality. Geometry designed for precise engagement and chip control The rhombic 04 form and 11° clearance angle create a predictable engagement with the workpiece, enabling accurate dimensioning and surface finish. The insert’s cylindrical hole with a single countersink (40°–60°) secures stable clamping and repeatable seating in compatible holders. The one‑sided chipbreaker helps direct chip flow for common turning tasks, lowering the risk of chip interference and improving machine uptime. Together, these geometry features support efficient chip evacuation and consistent contact conditions at the cutting edge, which benefits cycle time and surface integrity. Versatility for external and internal turning tasks Designed specifically for turning, the insert suits both external and internal operations when paired with the correct holder or boring bar. The ISO designation allows straightforward integration into established tool systems: select the matching holder by verifying form, clearance angle, tolerance class, fastening method, size and thickness. The result is a flexible component that can be applied across a range of workpiece setups, delivering reliable performance whether finishing or performing light roughing operations. Process integration and economic benefits As part of an ISO insert system, the package logic includes the insert, a compatible outside holder or boring bar, base/clamp sets and replacement screws. This simplifies procurement and spares management while supporting fast reassembly during tool changes. The combination of robust carbide construction and the GH110 grade provides measurable reductions in downtime and tool consumption under typical shopfloor conditions, improving overall productivity. Selecting an insert that matches material characteristics and machining stability helps preserve machine time and reduces non‑productive activity, making the insert a pragmatic choice for continuous production. For application recommendations or to secure original Tungaloy EPGT040102 GH110 inserts, contact Metav Werkzeuge for specialist advice via info@metav-werkzeuge.com or call +49 2822 7131930 — assistance for matching holders and chipbreaker selection is available. Technical data Article number: 6804315 Manufacturer SKU: TUN6804315 SKU: 6804315-Tungaloy Model series: ISO turning inserts Designation: EPGT040102 Material: Carbide Grade: GH110 Manufacturer: Tungaloy Core data Insert size: 04 Thickness: 1.59 mm Cutting edge radius: 0.2 mm Clearance angle: 11° Included angle: 75° Design & features Rhombic insert form Cylindrical hole + single countersink (40°–60°) One‑sided chipbreaker ISO designation 040102 ISO‑compatible geometry for holders Intended for external and internal turning System build: insert, holder/boring bar, base/clamp set, replacement screws FAQ What determines whether the insert fits a holder? Compatibility is defined by the holder’s form, clearance angle, tolerance class, fastening method, insert size and thickness; verify these parameters to ensure correct seating of the EPGT040102 GH110 insert. Which chipbreaker is fitted and when is it suitable? This insert features a one‑sided chipbreaker; select a chipbreaker and grade according to workpiece material, depth of cut and machining stability to optimise chip control and surface quality. Can the insert be used for internal turning operations? Yes — when mounted in a suitable boring bar the ISO‑format insert is suitable for internal turning as well as external turning, provided holder geometry and clamping meet the insert’s seating requirements. What performance characteristics does GH110 offer? The GH110 Tungaloy grade combines wear resistance, toughness and edge stability to provide consistent cutting behaviour in general turning applications, improving tool life and repeatability. How does the cylindrical hole and countersink affect clamping? The cylindrical hole with a single countersink (40°–60°) enables secure, centred clamping that promotes repeatable seating and stable cutting forces for improved dimensional control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of GH110 wear resistance, precise 0.2 mm corner radius and ISO compatibility for reliable turning operations; order directly via Metav Werkzeuge or consult the team for application advice. EPGT 040102 GH110 – Tungaloy indexable turning insert for turning (rhombic, 75°) EPGT 040102 GH110 is a rhombic ISO indexable insert designed for general turning and finishing operations, offering a balance of wear resistance and edge stability for demanding production environments. ISO‑compliant rhombic insert Tungaloy GH110 grade for durability 0.2 mm corner radius for fine profile control Single‑sided chipbreaker with hole Consistent cutting performance for production turning The insert is engineered to deliver reproducible results across batch and single‑piece production. Built on a cemented carbide substrate and supplied in the GH110 grade from Tungaloy, this turning solution provides a measured compromise between hardness and toughness that reduces edge breakdown and extends tool life. The 75° included angle and 11° relief angle create a robust cutting edge that resists chipping under interrupted or stable cuts, while the single‑sided chipbreaker helps to control chip formation and evacuate swarf more predictably. These characteristics translate into fewer tool changes and a steadier process window on both shopfloor and CNC turning centres. Geometry and grade explained — why it matters for part quality The rhombic form with a 0.2 mm corner radius gives a precise contour for delicate external profiles and light finishing passes, keeping dimensional scatter to a minimum. The insert thickness of 1.59 mm and the ISO designation 040102 define the seating and clamping requirements, so selecting the correct holder geometry is essential for consistent cutting conditions. The GH110 grade complements the geometry by offering enhanced wear resistance without sacrificing the necessary edge toughness; in practice this means improved surface finish and longer intervals between re‑grinds. The presence of a cylindrical hole plus a single‑side countersink (40°–60°) ensures secure clamping and correct axial positioning in appropriately designed toolholders. System compatibility and workshop advantages This insert is part of a standard ISO turning insert system and will be compatible with holders and boring bars that match the ISO form, relief angle, tolerance class, fastening method, size and thickness. Including the insert in a systematic tooling setup facilitates fast changeovers: simply pair the insert with the matching external holder, shim/clamping kit and spare screws to restore cutting performance quickly. The Tungaloy carbide grade and chipbreaker design support efficient metal removal and consistent surface quality, which reduces downstream finishing effort and improves overall process economy. For technical clarification or assistance in selecting the matching holder and cutting data, Metav Werkzeuge is available to provide detailed guidance and sample recommendations. For tailored advice on Tungaloy indexable inserts or to discuss application-specific setup with Metav Werkzeuge, please contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6804310 SKU: 6804310-Tungaloy Manufacturer SKU: TUN6804310 Product name: EPGT040102 GH110 Tungaloy indexable insert Facts ISO designation: 040102 Included angle: 75° Relief angle: 11° Corner radius: 0.2 mm Thickness: 1.59 mm Size code: 04 Special features Material: cemented carbide Grade: GH110 (Tungaloy) Shape: rhombic Chipbreaker: single‑sided Hole: with hole — cylindrical hole + single‑side countersink (40°–60°) Intended application: turning System components: compatible holder, shim/clamping set and spare screws FAQ What applications suit this insert best? The EPGT040102 GH110 Tungaloy indexable insert is intended for general external and internal turning tasks where a rhombic insert and a 75° included angle are advantageous for profile work and finishing. How does the GH110 grade affect performance? The GH110 grade supplied by Tungaloy provides a balance of wear resistance and edge toughness, meaning the EPGT040102 delivers longer life in abrasive conditions while maintaining stable cutting edges. Is this insert compatible with standard ISO holders? Yes, the insert complies with ISO form and size (040102) and will fit holders that match the form, relief angle, tolerance class, fastening method, size and thickness specified for this type. What is the benefit of the single‑sided chipbreaker? The single‑sided chipbreaker on this insert helps control chip flow and breakage, improving swarf evacuation and reducing the risk of chip entanglement in turning operations using the EPGT040102 GH110 insert. How should the hole and countersink be used when mounting? The cylindrical hole with a single‑side countersink (40°–60°) ensures precise axial positioning and reliable clamping when the insert is secured in a matching insert seat and clamping kit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 GT9530 Wendeplatten - Tungaloy
Take advantage of the coated cermet GT9530 grade and the precise 0.2 mm corner radius for consistent finishing of steel components, combined with ISO compatibility that simplifies toolholder selection; order directly via Metav Werkzeuge or consult the experts for application-specific advice. EPGT040102 GT9530 indexable insert for turning — Tungaloy, ISO rhombic 04, 11° clearance The EPGT040102 is an ISO rhombic indexable insert intended for external and internal turning applications, engineered for stable finishing on steel where surface quality and extended tool life are required Coated cermet grade GT9530 for wear resistance Rhombic ISO shape 04 for versatile turning Clearance angle 11° for consistent cutting geometry Single-sided chipbreaker for stable finish Improved productivity through a wear-resistant cermet grade The coated cermet grade GT9530 delivers a balance between surface finish and tool life, making it particularly effective for finishing and light general-purpose turning of steel. The combination of coating and substrate reduces flank wear under stable clamping and cutting conditions, which in turn lowers tool-change frequency and supports uninterrupted production cycles. For production planners, this means fewer machine stops and more predictable tool consumption rates, helping to calculate cost-per-part with greater confidence. Reliable geometry for precise surface quality A rhombic ISO 04 profile with an 11° clearance angle and a 0.2 mm corner radius offers a predictable contact geometry that benefits dimensional control and surface appearance. The single-sided chipbreaker design assists in controlled chip formation during finishing cuts, reducing the risk of built-up edge and improving repeatability part to part. Operators unfamiliar with cermet grades will find that the moderate corner radius supports light radiused transitions without compromising edge strength. Easy integration with standard toolholders and clamping systems The insert conforms to ISO standards for form, mounting and tolerance, and is supplied with a cylindrical hole plus single-sided countersink (40°–60°) for secure fastening. Compatibility is determined by shape, relief angle, tolerance class, fastening method, size and thickness; as such, the insert fits a wide range of external holders and boring bars used in conventional turning centres. Choosing an ISO-compliant insert simplifies logistics, enables interchangeability and reduces the variety of spare parts carried in the tooling cabinet. Practical selection guidance for stable turning conditions Select the GT9530 variety when stable chip evacuation and a superior surface finish on steel are priorities; pair the insert with a holder that matches the insert form and tolerance class for optimal clamping stability. For coarse or interrupted cuts, consider an alternative grade designed for roughing; where finishing accuracy and longevity under steady feeds and depths are required, the coated cermet option provides clear advantages. If additional technical data or cutting parameters are needed, Metav Werkzeuge’s technical advisors can supply speed and feed recommendations based on the mounted assembly and workpiece material. Contact Metav Werkzeuge for tailored application advice or to request a quotation for the Tungaloy EPGT040102 GT9530 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support Technical data Article number: 6997897-Tungaloy Manufacturer article number: 6997897 Manufacturer SKU: TUN6997897 Model series: ISO-Drehwendeschneidplatten Facts Shape size: 04 Plate thickness: 1.59 mm Clearance angle: 11° Wedge angle: 75° Corner radius: 0.2 mm Materials & special features Substrate: carbide Cutting material type: coated cermet (GT9530) Design: rhombic, single-sided Chipbreaker: one-sided Mounting: with hole; cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) FAQ What materials is this insert suitable for? The EPGT040102 GT9530 Tungaloy indexable insert is optimised for turning steel, offering improved surface finish and longer life under stable cutting conditions. How is the insert fastened to the holder? The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) for standard clamping methods; ensure the holder matches the insert form and tolerance class for secure mounting. Can this grade be used for roughing operations? The GT9530 coated cermet is designed for finishing to light universal use; for heavy roughing or interrupted cuts, a tougher roughing grade is recommended instead of this finishing-oriented insert. What benefits does the 0.2 mm corner radius provide? A 0.2 mm corner radius balances edge strength and surface finish, making it suitable for precise finishing passes where small radii help to maintain dimensional tolerances without excessive edge wear. Is the insert ISO-compliant for straightforward replacement? Yes, the insert follows ISO dimensions and tolerances for rhombic turning inserts, which simplifies replacement and interchangeability with compatible toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 J740 Wendeplatten - Tungaloy
High cutting-edge stability and a J740 carbide grade deliver consistent results and extended tool life in turning operations; the rhombic form with an 11° clearance ensures secure seating and reliable chip control. Order the EPGT040102 J740 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. EPGT040102 J740 Rhombic Turning Insert, 75° Cutting Angle — Tungaloy EPGT040102 J740 is an ISO‑standard rhombic turning insert designed for external and internal turning with an 11° clearance and a single‑sided chipbreaker. ISO‑standard rhombic insert, size 04 J740 Tungaloy grade for wear and edge stability Single‑sided chipbreaker, suitable for turning Cylindrical hole with 40°–60° countersink Improved process reliability through standardised compatibility The insert is built to ISO specification, which means compatibility with a wide range of toolholders is defined by shape, clearance angle, tolerance class, fastening and thickness. This standardisation reduces setup time and minimises the risk of incorrect mounting, providing a predictable machining process. For operations where tool change frequency and repeatability matter, the ISO conformity supports a more efficient inventory strategy and fewer interruptions on the shop floor. Balanced carbide grade for longer running times and stable edges The Tungaloy J740 grade combines wear resistance and toughness to give a pragmatic balance between tool life and edge stability. Such a material composition is particularly advantageous when facing mixed production batches or variable clamping conditions, as it resists rapid flank wear while still tolerating intermittent shocks. The result is a steadier surface finish and fewer insert changes, translating into lower machining costs per component and improved uptime. Geometry and chip control that support safe, productive turning The rhombic 04 shape with a 75° cutting angle and 11° clearance delivers both accessibility and strength for external and internal turning. The integrated single‑sided chipbreaker actively shapes chips to encourage controlled evacuation, reducing the likelihood of entanglement and enhancing surface integrity. The insert’s cylindrical hole with a one‑sided countersink (40°–60°) ensures reliable clamping and correct seating; this contributes directly to repeatable cutting conditions and consistent part quality. For guidance on machining parameters with the Tungaloy J740 grade and to arrange supply through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt consultation and ordering. Technical Data Article number: 6821732 Manufacturer SKU: TUN6821732 SKU: 6821732-Tungaloy Facts ISO code: 040102 Size: 04 Thickness: 1.59 mm Corner radius: 0.2 mm Clearance angle: 11° Cutting angle: 75° Design / Special features Carbide material Tungaloy grade J740 Rhombic plate form Single‑sided chipbreaker Cylindrical hole with one‑sided countersink (40°–60°) With hole for secure fastening ISO‑standard indexable turning plate series Intended for external and internal turning FAQ What toolholders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the EPGT040102 J740 insert fits ISO‑standard holders designed for rhombic 04 plates. Which materials can be machined with this grade? The J740 Tungaloy carbide is formulated for a broad material range and gives good wear resistance and edge stability when turning steels and similar workpiece materials. How does the chipbreaker affect machining? The single‑sided chipbreaker on this insert improves chip control during turning, promoting safer chip evacuation and thereby supporting consistent surface finish and tool life. What is the benefit of the 11° clearance angle? An 11° clearance reduces rubbing behind the cutting edge, lowering cutting forces and helping to protect the insert edge while maintaining adequate strength for general turning tasks. Can this insert be used for internal turning? Yes, the rhombic geometry and 75° cutting angle make the insert suitable for both external and internal turning operations when the correct holder is selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated cermet grade and a precise rhombic geometry to achieve consistent finishing passes with low cutting forces; order original Tungaloy inserts directly via Metav Werkzeuge or request application advice from their consultants. EPGT040102 NS9530 Tungaloy turning insert – rhombic 04, 11° relief The EPGT040102 NS9530 is an ISO-format rhombic turning insert designed for finishing steel with a sharp cutting edge and optimised low cutting forces for continuous, light-turning operations NS9530 uncoated cermet for finishing Sharp edge for superior surface finish Rhombic 04 form with 11° relief Suitable for continuous light cuts Higher-quality finishing with reduced cutting forces The uncoated NS9530 cermet grade is formulated for finishing of steel, providing a sharp cutting edge that lowers cutting forces and helps secure a consistently fine surface texture. As a finishing grade, it is intended for continuous cuts and small depths of cut, which reduces vibration and contributes to predictable results. The result is improved part consistency and fewer rework cycles, translating into greater process efficiency and time savings on high-volume finishing tasks. Stable insert geometry for repeatable tool performance The rhombic 04 geometry, combined with an 11° relief and a 0.2 mm corner radius, supports controlled chip formation and fine surface outcomes. The insert presents an included angle of 75°, a plate thickness of 1.59 mm and a secure mounting option with a cylindrical hole and single-side countersink (40°–60°), ensuring repeatable clamping and alignment. Compatibility with the toolholder is determined by form, relief angle, tolerance class, fastening method, size and thickness, so matching the insert to a compatible holder preserves cutting stability and repeatability. Application guidance and system-level benefits Designed as part of an ISO turning system, the insert is used together with an appropriate outer holder or boring bar, a suitable shim or clamp set and replacement screws. For practical use, select the single-sided chipbreaker and the grade NS9530 for finishing operations on steel where low cutting forces and superior surface finish are priorities. The combination of uncoated cermet and optimised geometry reduces built-up edge tendency during low-depth continuous turning, supporting longer effective tool life and steady component quality. For application advice or to confirm holder compatibility, Metav Werkzeuge consultants are available to provide technical guidance and selection support. For high-quality finishing on steel components, contact Metav Werkzeuge to request the original Tungaloy EPGT040102 NS9530 turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical advice Technical data Article number: 6998033 Manufacturer SKU: TUN6998033 Brand: Tungaloy Model series: ISO turning inserts Facts Corner radius: 0.2 mm Relief angle: 11° Included angle: 75° Plate thickness: 1.59 mm Insert size: 04 Special features Material: carbide Grade/coating: uncoated cermet NS9530 Chipbreaker: single-sided Mounting: with hole — cylindrical hole + one-side countersink (40°–60°) Intended use: external and internal turning, finishing on steel System composition: ISO insert, holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suited for? The NS9530 grade is formulated for finishing on steel; the EPGT040102 insert delivers low cutting forces and a fine surface when used for light continuous turning of steel components. Which operations are appropriate for this insert? This insert is designed for external and internal turning where finishing passes and small depths of cut are required, especially continuous, vibration-free machining. How is holder compatibility determined? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; the EPGT040102 must match the holder's specifications for correct clamping and alignment. What effect does the 0.2 mm corner radius have? A 0.2 mm radius supports a fine surface finish while keeping cutting forces low, making it suitable for precise finishing passes with minimal tool-induced distortion. Is the insert coated? The NS9530 variant is an uncoated cermet finishing grade, optimised for sharp edge performance and high surface quality on steel Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, consistent chip control and ISO compatibility for reliable turning results. Order the EPGT 040102 NS9530 insert directly via Metav Werkzeuge or consult our technical team for application advice. EPGT 040102 NS9530 turning insert (finishing) — Tungaloy The EPGT 040102 NS9530 is an ISO rhombic turning insert intended for finishing cuts on steel components, offering a sharp cutting edge and low cutting forces for continuous turning operations. ISO rhombic insert size 04 NS9530 uncoated cermet finishing grade Sharp edge for low cutting forces Cylindrical hole with 40°–60° countersink Precision finishing for steel components The insert is a finishing grade based on NS9530 and an uncoated cermet substrate, designed to deliver a high surface finish with reduced cutting forces. The sharp edge geometry minimises deformation at the cut, which supports consistent dimensional accuracy on turned shafts and collars. For continuous cuts and small depths of cut, this configuration reduces rework and enhances throughput. Stable cutting performance and predictable chips A single-sided chipbreaker and optimised edge form promote controlled chip formation during standard turning operations. The chip control reduces material buildup on the cutting edge and lowers vibration potential, which in turn preserves tool life and workpiece integrity. These effects yield a measurable improvement in process stability and repeatability for production environments. Easy integration into ISO tool systems Conforming to ISO insert standards, the rhombic size 04 geometry and the cylindrical hole with single-side countersink (40°–60°) ensure compatibility with common external holders and boring bars. The insert’s 11° relief angle and 75° included angle are key parameters for selecting a suitable seat and clamp; compatibility depends on form, tolerance class, fastening method, size and thickness of the toolholder. Practical handling and recommended use With a corner radius of 0.2 mm and a plate thickness of 1.59 mm, this insert is optimised for fine finishing passes and small stepovers. It is primarily intended for turning steel where smooth surfaces and low cutting resistance are priorities. For interrupted cuts or heavy roughing, choose a grade and geometry designed for shock resistance; for continuous finishing, this insert offers a cost-effective balance of quality and productivity. Contact Metav Werkzeuge today for tailored advice on integrating the Tungaloy EPGT 040102 NS9530 turning insert into existing tool systems or to request cutting data tailored to specific steel grades; Metav Werkzeuge can be reached by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6998034 SKU: 6998034-Tungaloy Manufacturer SKU: TUN6998034 Model series: ISO turning inserts Designation: EPGT040102 Key measurements Size: 04 Thickness: 1.59 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 75° Features and materials Uncoated cermet grade NS9530 Rhombic insert form Single-sided chipbreaker Cylindrical hole with 40°–60° countersink ISO-compliant insert for turning FAQ What is the primary application for this insert? The EPGT 040102 NS9530 insert is intended for turning applications, specifically finishing steel components where a fine surface and low cutting forces are required. Which materials does this grade suit best? The NS9530 uncoated cermet grade is optimised for steel finishing; it performs well in continuous cut conditions and with small depths of cut. How does the chip control work with this geometry? The single-sided chipbreaker on the EPGT 040102 promotes consistent chip formation, reducing edge build-up and improving process stability. Is this insert compatible with standard ISO holders? Yes — the ISO-compliant rhombic form, size 04, and the hole with countersink are designed for compatibility; selection of the correct holder depends on form, relief, tolerance class and fastening method. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 SH7025 Wendeplatten - Tungaloy
Take advantage of a combination of ISO compatibility, a SH7025 coated carbide grade and a compact 0.2 mm corner radius to achieve stable cutting and predictable tool life in turning operations; order directly via Metav Werkzeuge or contact the consultants for application-specific guidance. EPGT 040102 SH7025 indexable turning insert by Tungaloy — ISO-standard 75° rhombic insert for external and internal turning The EPGT 040102 SH7025 is an ISO-standard indexable insert designed for external and internal turning, offering a coated carbide grade optimised for edge stability and variable engagement conditions ISO-standard rhombic insert 75° geometry SH7025 coated carbide for edge stability One-sided chipbreaker, hole with 40°–60° countersink 0.2 mm corner radius, 1.59 mm plate thickness Consistent machining performance through a robust coated carbide grade The SH7025 coating and the underlying coated carbide substrate are formulated for edge stability under changing cutting conditions, which leads to consistent tool life and reduced unplanned stoppages. In practice, this means the insert sustains a reliable cutting edge during sequence changes and smaller toolholders, helping maintain production flow. The coating reduces adhesion and wear, while the tougher substrate tolerates intermittent chip loads; together these properties give a balance between wear resistance and toughness that suits general-purpose turning tasks. ISO geometry and clamping design that simplifies toolholder compatibility The insert’s ISO-standard designation and its 75° rhombic form make selection and documentation straightforward in a toolroom environment. Compatibility with a holder is determined by form, clearance angle, tolerance class, clamping method, size and thickness — details that are standardised so the insert fits compatible external holders and boring bars. The one-sided chipbreaker and the cylindrical hole with 40°–60° countersink support positive clamping and predictable chip control, which helps maintain surface finish and reduces the need for extensive process tuning when switching inserts. Precise dimensions for repeatable surface finish and toolpath planning A 0.2 mm corner radius supports finer surface finishes at common finishing feeds, while the 11° clearance angle reduces rubbing and heat buildup at the flank, improving surface integrity and part tolerances. The nominal 1.59 mm plate thickness and the size code (04) ensure mechanical stability in the intended range of bore and external turning operations. By selecting the appropriate feed and depth of cut to match the small corner radius, the result is a predictable balance of edge strength and finished-part quality, especially useful when machining components that demand consistent dimensional accuracy. Practical advantages for workshop use and process planning Being an ISO-spec insert, the item integrates easily into existing tool management systems and stock lists, which simplifies procurement and replacement cycles. The insert’s chip control features and robust grade mean fewer insert changes in mixed-production environments, improving overall productivity. For operators assessing inserts for specific materials or hardness ranges, the coated carbide grade offers broad applicability; paired with the correct chipbreaker style and holder rigidity, it supports a wide spectrum of turning tasks from semi-finishing to light finishing. Contact Metav Werkzeuge for tailored advice and to arrange supply of EPGT 040102 SH7025 turning inserts through Metav Werkzeuge; technical consultants are available to confirm holder compatibility and cutting data Technical data Article number: 6967505 SKU: 6967505-Tungaloy Manufacturer SKU: TUN6967505 Model series: ISO-Drehwendeschneidplatten Material: Carbide Core data Size code: 04 Geometry angle: 75° Corner radius: 0.2 mm Plate thickness: 1.59 mm Clearance angle: 11° SKU manufacturer: TUN6967505 Special features Coating/grade: SH7025 Shape: Rhombic Chipbreaker: One-sided Hole: With hole — cylindrical hole + single-side countersink (40°–60°) Typical application: Turning Suitable for use with ISO-standard external holders and boring bars FAQ What materials is this insert suitable for? The EPGT 040102 SH7025 insert is formulated with a coated carbide grade that provides broad material coverage; the SH7025 grade is chosen for toughness and edge stability across common steels and mixed workloads in turning. How does the chipbreaker influence machining? The one-sided chipbreaker on the EPGT 040102 SH7025 assists in controlled chip formation and evacuation, which supports consistent surface finish and reduces the risk of chip entanglement during external and internal turning. Is this insert compatible with standard ISO holders? Yes — the EPGT 040102 designation follows ISO geometry rules, and compatibility depends on matching form, clearance angle, tolerance class, fixation method, size and thickness to the intended holder. Which features improve repeatability in production? The coated carbide grade SH7025 and precise dimensional tolerances (0.2 mm corner radius, 1.59 mm thickness) deliver edge stability and consistent mounting, which together enhance repeatable machining performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide SH7025 grade and a 0.2 mm corner radius to maintain consistent cutting-edge performance across varying engagement conditions; the ISO form and 11° clearance ensure reliable clamping and repeatable set-ups. Order genuine inserts or consult Metav Werkzeuge for advice and rapid supply. EPGT 040102 SH7025 – ISO turning insert (Tungaloy) A robust EPGT040102 SH7025 turning insert for ISO-compliant external and internal turning, designed for stable cutting edges and secure mounting in compatible holders. SH7025 coated carbide for edge stability ISO rhombic insert 04 with 11° clearance Single-sided chipbreaker for controlled chips 1.59 mm thickness for consistent clamping Consistent edge life with a robust coated carbide grade The SH7025 grade is a coated carbide engineered to deliver a stable cutting edge, especially where small tools or changing engagement depths are involved. This indexable insert reduces the need for frequent edge changes by offering improved wear resistance and dependable performance over series production runs. The result is fewer interruptions, lower tool-change frequency and a more predictable process window, which supports higher overall productivity in turning operations. ISO conformity and secure mounting for repeatable results Manufactured to ISO dimensions, the insert’s form and tolerance class determine compatibility with holders and boring bars; ISO-compliant geometry makes changeovers straightforward across standard tool systems. The insert features a cylindrical hole with a single-sided countersink (40°–60°) that facilitates precise seating and torque-controlled fastening. With a 1.59 mm thickness and an 11° clearance, the design balances rigidity and the necessary relief angle for smooth chip formation and extended tool life. Practical application and chip control for improved process stability This rhombic 04 insert with a 0.2 mm corner radius and single-sided chipbreaker is intended for general external and internal turning tasks where dependable chip control matters. The single-sided chipbreaker promotes predictable chip flow, reducing the risk of entanglement and improving surface quality. Choosing the correct chipbreaker and grade for the workpiece material and machining strategy results in fewer rejects and a more efficient machining cycle, supporting both short runs and continuous production. For procurement of genuine Tungaloy EPGT040102 SH7025 inserts or tailored machining advice, contact Metav Werkzeuge — info@metav-werkzeuge.com or phone +49 2822 7131930 — for fast supply and application support Technical data Article number: 7743503-Tungaloy Manufacturer: Tungaloy Type designation: EPGT040102 SH7025 Series: ISO turning inserts Facts Thickness: 1.59 mm Corner radius: 0.2 mm Clearance angle: 11° Insert size: 04 Included angle: 75° Special features Rhombic shape Cylindrical hole + single-sided countersink (40°–60°) Single-sided chipbreaker Coated carbide grade SH7025 ISO-compliant indexable insert FAQ What materials is this insert intended for? The SH7025 grade insert is a general-purpose coated carbide designed for a broad range of turning tasks; selection of the chipbreaker and cutting data should match the workpiece material and machining strategy. How does the hole and countersink affect mounting? The cylindrical hole with a single-sided countersink (40°–60°) ensures accurate seating and repeatable clamping force for secure fixation in compatible ISO holders. What benefits does the 0.2 mm corner radius provide? A 0.2 mm corner radius allows for fine profiling and controlled edge strength, supporting light finishing cuts and improving surface consistency while maintaining edge robustness. Is the EPGT040102 SH7025 suitable for both external and internal turning? Yes; the insert’s rhombic 04 form and single-sided chipbreaker make it appropriate for both external and internal turning applications when paired with the correct holder and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of coated cemented carbide durability and precise geometry for reliable turning performance; the 0.2 mm corner radius and one-sided chipbreaker ensure stable chip formation and consistent surface quality. Order original Tungaloy inserts directly via Metav Werkzeuge or consult our technical team for application-specific advice. EPGT 040102 SH7025 – Tungaloy indexable insert for turning, rhombic 04, 75° The EPGT040102 SH7025 Tungaloy indexable insert is an ISO‑standard rhombic turning insert designed for versatile external and internal turning applications. Coated cemented carbide grade SH7025 Rhombic 04 shape, 75° approach angle One-sided chipbreaker for controlled chips 0.2 mm corner radius for edge stability Consistent chip control for uninterrupted turning The SH7025 grade delivers stable cutting edges and reliable chip control in a variety of turning operations. The one-sided chipbreaker is engineered to direct and break chips predictably, which reduces recutting and improves process stability. For workshops that cycle between different part geometries, this chip control reduces interruptions and simplifies swarf management, translating into fewer machine stops and a steadier production flow. Straightforward mounting and ISO compatibility Thanks to its ISO 040102 designation and the with hole plus single‑side countersink (40°–60°) mounting, this insert is compatible with standard external holders and boring bars that match form, clearance angle and tolerance class. The rhombic 04 outline combined with a 75° approach angle enables secure clamping and predictable engagement; the 1.59 mm thickness contributes to rigidity despite the small overall size. This compatibility shortens setup time and reduces tool inventory complexity when matching inserts to holders. Robust edge performance under varying conditions The insert’s coated cemented carbide construction offers a balance between toughness and wear resistance, making it suitable for turning when cutting conditions vary or for smaller tools where edge stability is critical. The 0.2 mm corner radius supports repeatable surface finish and helps absorb minor interruptions in feed without catastrophic edge failure. In practice, this means longer intervals between indexings and a more consistent part finish in batch production or mixed‑series environments. Contact Metav Werkzeuge to discuss the SH7025 grade and secure original Tungaloy inserts; our technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6967509 Manufacturer SKU: TUN6967509 SKU: 6967509-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Material: Cemented carbide Core data Corner radius: 0.2 mm Approach angle: 75° Relief angle: 11° Thickness: 1.59 mm Size: 04 ISO code: 040102 Special features Coating / grade: SH7025 Chipbreaker: one-sided Mounting: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Insert shape: rhombic Application: turning FAQ What materials is this insert suitable for? The SH7025 coated cemented carbide insert is designed for a broad range of workpiece materials in turning; its toughness and edge stability make the insert suitable for many steels and mixed materials under typical turning conditions. How is the insert mounted in the toolholder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping; ensure the holder matches the ISO form, tolerance and clearance angle for correct seating. Can the insert be used for both external and internal turning? Yes, the rhombic 04 outline and the 75° approach angle make the insert appropriate for both external and certain internal turning operations when paired with the correct holder or boring bar. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius provides a balance between edge strength and finish quality; it helps maintain a consistent surface while offering resistance to minor interruptions or variations in feed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 SH7025 Wendeplatten - Tungaloy
Combining the SH7025 coated cemented carbide grade with ISO compatibility and a 0.2 mm corner radius yields stable cutting and fine surface results; order the EPGT040102 insert directly via Metav Werkzeuge or consult our specialists for application advice. EPGT040102 SH7025 Tungaloy insert — ISO rhombic turning insert, 75° cutting angle A EPGT040102 SH7025 Tungaloy insert for ISO‑standard external and internal turning, engineered to offer edge stability in small‑tool setups and variable engagement conditions SH7025 coated carbide grade ISO rhombic insert size 04, 75° cutting angle 0.2 mm corner radius for fine finishes Cylindrical hole with single-side countersink Durable grade for varying engagement conditions The SH7025 designation identifies a coated cemented carbide grade developed for toughness and edge stability. In practice, this means the insert sustains cutting forces in situations with fluctuating chip load or interrupted cuts, especially when used in smaller toolholders. The combination of a resilient substrate and a protective coating reduces flank wear and helps maintain repeatable tool life, supporting continuous production or small‑batch runs where consistent performance is required. Geometry designed for precision and holder compatibility The rhombic plate shape with ISO code 040102 and a nominal cutting angle of 75° ensures predictable cutting vectors for conventional turning operations. The insert’s 11° clearance angle and the 1.59 mm plate thickness contribute to stable seating in the pocket and reliable chip flow. Compatibility with ISO‑standard holders is determined by form, clearance, tolerance class, fastening style, size and thickness; selecting a matching holder and clamp set ensures accurate alignment and repeatable results in serial machining. Fine finishing and secure clamping for improved surface quality A 0.2 mm corner radius provides a balance between edge strength and the ability to achieve fine surface finishes on external and internal features. The single‑sided chipbreaker is optimised for specific cutting conditions and, when matched to workpiece material and machining parameters, promotes compact chips and stable cutting. The cylindrical hole with single‑side countersink (40°–60°) facilitates secure clamping with replacement screws and underlay kits, reducing the risk of micro‑movement and improving dimensional consistency across batches. Practical application notes and selection guidance This insert is intended for turning applications where variable engagement or small‑tool geometries are present; choose the chipbreaker and cutter grade according to the workpiece material, operation and machine stability. When replacing inserts, confirm holder compatibility by checking form and tolerance class, and use the specified underlay and clamping set for repeatable seat height. For tailored parameter recommendations or if clarification is required regarding suitability for a given task, refer to Metav Werkzeuge’s technical advisers or provide the operative conditions for an informed selection. For robust, repeatable turning with Tungaloy’s SH7025 grade, request the EPGT040102 insert from Metav Werkzeuge or contact our consultants at Metav Werkzeuge for application support and ordering assistance. Technical data Article number: 6967503 SKU: 6967503-Tungaloy Manufacturer SKU: TUN6967503 Model series: ISO‑Drehwendeschneidplatten Designation: EPGT040102 SH7025 Material: cemented carbide Numbers / Core technical data Corner radius: 0.2 mm Cutting angle: 75° Clearance (relief) angle: 11° Plate thickness: 1.59 mm Plate size: 04 ISO code: 040102 Special features / Versions Coating / grade: SH7025 Plate shape: rhombic Chipbreaker: one‑sided Hole: cylindrical hole with single‑side countersink (40°–60°) Typical application: external and internal turning System build: ISO insert, compatible external holder or boring bar, underlay/clamp set and replacement screws FAQ What operations is this insert suited for? The EPGT040102 SH7025 Tungaloy insert is designed for external and internal turning where edge stability and toughness are needed, particularly in small‑tool setups or changing engagement conditions. How does the SH7025 grade influence tool life? SH7025 is a coated cemented carbide grade that promotes stable edge behaviour under variable loads, helping to delay flank wear and extend the useful life of the insert in many turning applications. What must be checked to ensure holder compatibility? Compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness; confirm these parameters with the chosen ISO‑standard holder before assembly. Can this insert achieve fine surface finishes? Yes — the 0.2 mm corner radius and the plate geometry support fine finishing when combined with suitable cutting parameters and a properly matched chipbreaker. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930
EPGT 040102 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a tough, edge-stable SH725 grade and precise ISO geometry for consistently productive turning. The insert’s compact dimensions and standardised fixing make toolholder selection straightforward; order via Metav Werkzeuge or consult the technical team for application advice. EPGT040102 SH725 Tungaloy indexable turning insert – ISO 040102, 75° rhombic A EPGT040102 SH725 indexable insert designed for external and internal turning, optimised for small tools and variable engagement conditions ISO‑standard rhombic insert 75° Coated cemented carbide SH725 0.2 mm nose radius for fine finishes Suitable for external and internal turning Consistent cutting performance with a tough, edge‑stable grade The SH725 grade is a coated cemented carbide developed for toughness and edge stability, giving reliable performance where cutting conditions change frequently. As a consequence, chip formation remains controlled even with small‑diameter tools or intermittent cuts; this reduces the risk of edge chipping and extends effective tool life. The insert is intended specifically for turning operations and delivers predictable behaviour in dynamic machining, supporting efficient cycle times and fewer unscheduled tool changes. Geometry that supports accuracy and surface quality The rhombic 75° relief and the 0.2 mm nose radius combine to offer a balance between rigidity and finish capability. The moderate nose radius helps achieve fine surface quality without compromising on strength at the cutting edge. The compact 1.59 mm thickness and a cylindrical hole with single‑side countersink (40°–60°) provide secure clamping and repeatable seating in compatible toolholders, reducing vibration and enhancing dimensional stability on the workpiece. These attributes are especially useful when tight tolerances and consistent finishes are required. ISO compatibility and clear holder selection criteria As part of an ISO‑standard insert series, compatibility with a holder is governed by form, 11° clearance angle, tolerance class, fixing method, size and thickness. This standardisation simplifies integration into existing tool systems: choose a matching external holder or boring bar, plus the correct clamp set and replacement screws for secure assembly. The ISO basis permits readily available clamping systems to be used, supporting quick insert changes and consistent positioning across multiple tools. Practical application focus and production benefits Designed for turning, the insert excels where tool engagement varies or space constraints demand compact tooling. The single‑sided chipbreaker geometry supports predictable chip flow for a range of operations, while the overall design reduces set‑up complexity. For manufacturing environments prioritising uptime, the combination of a robust grade and standardised geometry means fewer interruptions and steady machining performance, contributing to overall process reliability and efficient throughput. For secure procurement and machining support for the Tungaloy SH725 insert, contact Metav Werkzeuge to place orders or request application guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6737249 Manufacturer SKU: TUN6737249 SKU: 6737249-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Grade / coating: SH725 Facts Size designation: 04 Thickness: 1.59 mm Nose radius: 0.2 mm Included angle: 75° Clearance angle: 11° Hole: cylindrical hole + single‑side countersink (40°–60°) Special features Shape: rhombic Chipbreaker: single‑sided Application: Drehen (external and internal turning) ISO‑standard indexable insert Compact design for small tools and variable engagements FAQ What turning operations is this insert intended for? The EPGT040102 SH725 Tungaloy indexable insert is intended for both external and internal turning, delivering stable performance where engagement conditions vary. Which geometry details are most relevant for setup? The insert features a 75° rhombic shape, a 0.2 mm nose radius and an 11° clearance angle; these dimensions are key when matching the insert to a holder and setting cutting parameters for the TUN6737249 item. How should a compatible holder be chosen? Holder compatibility depends on form, clearance angle, tolerance class, fixing method, size and thickness; selecting an ISO‑compliant holder and the correct clamp set ensures secure seating for the EPGT040102 SH725 insert. What does the SH725 grade offer for production? SH725 is a tough, edge‑stable coated carbide grade tailored for turning, especially effective with smaller tools and fluctuating cut engagements, providing reliable chip control and longer edge life. Is this insert suitable for fine finishing? Yes; the 0.2 mm nose radius combined with the insert’s rigidity and secure clamping enables fine surface finishes while maintaining cutting edge integrity for repeated operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 SH725 Wendeplatten - Tungaloy
Reliable machining is achieved by combining the tough SH725 coated carbide grade with the precise 0.2 mm corner radius, delivering stable cutting under varying engagement conditions; order the EPGT040102 SH725 Tungaloy insert via Metav Werkzeuge or consult our specialists for material-specific recommendations. EPGT040102 SH725 EPGT turning insert by Tungaloy – coated carbide, 0.2 mm radius The EPGT040102 SH725 is an ISO-standard rhombic turning insert engineered for external and internal turning, offering a coated carbide grade optimised for stable cutting and varied engagement conditions. Coated carbide grade SH725 for toughness 0.2 mm corner radius for precise finishes 11° clearance angle for secure seating ISO rhombic insert, size 04 with centre hole Reliable chip control that reduces rework and downtime The SH725 grade is a coated carbide designed to deliver stable cutting and consistent chip formation, particularly where tool engagements vary or where smaller tooling is used. The single-sided chipbreaker promotes predictable chip behaviour, which reduces the risk of built-up edge and improves surface finish on both external and internal turning operations. For production environments seeking repeatable cycles, this insert’s combination of material and chip geometry supports higher process stability and fewer interrupted cycles, enabling smoother workflow and lower scrap rates. Precision seating and edge stability for accurate, repeatable turning With a 0.2 mm corner radius and an 11° clearance angle, the insert offers a balance between edge strength and finishing ability. The rhombic ISO form and the central cylindrical hole with single-side countersink (40°–60°) ensure reliable clamping and alignment in compatible holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The plate’s 1.59 mm thickness and size 04 classification make it suitable where compact tool geometry is required without sacrificing repeatability. These attributes together reduce vibration risk and maintain cutting-edge integrity over longer tool life. Straightforward integration into ISO tool systems for versatile turning tasks As an ISO-standard turning insert, the EPGT040102 fits into established toolholder systems alongside matching shims, clamping sets and replacement screws, simplifying inventory and changeover. The insert is applicable for a broad range of turning tasks; select the chipbreaker and SH725 grade according to workpiece material and machine-tool rigidity for optimal results. Clear identification of the insert geometry and grade helps maintenance and procurement teams reduce setup times and ensures the right insert is selected for finishing or medium-duty roughing, contributing to higher shop-floor efficiency. For machining that demands consistent performance from Tungaloy’s SH725 grade, contact Metav Werkzeuge for tailored application advice and fast supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Item number: 6737282 Our SKU: 6737282-Tungaloy Manufacturer SKU: TUN6737282 Material: carbide Model series: ISO turning indexable inserts Designation: EPGT040102 SH725 Core specifications Size: 04 Corner radius: 0.2 mm Clearance angle: 11° Plate angle: 75° Plate thickness: 1.59 mm Features & application Grade: SH725 (coated carbide) Chipbreaker: single-sided Hole: with centre hole; cylindrical hole + single-side countersink (40°–60°) Plate form: rhombic Application: turning (external and internal) FAQ What materials is this insert suitable for? The EPGT040102 SH725 insert is formulated as a coated carbide suitable for general turning; select the SH725 grade and chipbreaker configuration according to the specific workpiece material and rigidity. How does the 0.2 mm corner radius affect finish and tool life? A 0.2 mm corner radius offers a compromise between sharper finishes and edge strength, improving surface quality while maintaining resistance to chipping when using the SH725 grade. Is the insert compatible with standard ISO holders? Yes, the insert is ISO-standard; compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness—ensure the holder matches the rhombic 04 geometry and 1.59 mm plate thickness. What advantages does the SH725 coating provide in turning operations? The SH725 coating delivers enhanced toughness and consistent chip control, supporting stable cutting under variable engagement conditions and promoting longer edge life in many turning applications. Can the insert be used for both roughing and finishing? The insert can serve in both roles depending on the chosen chipbreaker and machining parameters; its 0.2 mm radius and graded coating favour a balance between finishing capability and edge durability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 SH725 Wendeplatten - Tungaloy
Benefit from a combination of stable cutting-edge performance, broad material adaptability and ISO compatibility to keep turning operations productive and predictable; order directly via Metav Werkzeuge or consult the team for application guidance. EPGT 040102 SH725 ISO turning insert for turning — Tungaloy The EPGT040102 SH725 is an ISO‑standard rhombic turning insert engineered for external and internal turning, offering a tough, edge‑stable grade and a single‑sided chipbreaker for varying engagement conditions SH725 coated carbide grade for stable cutting ISO rhombic insert, size 04, 11° clearance Nose radius 0.2 mm for fine finish Cylindrical hole with one‑sided countersink High productivity from a tough, edge‑stable grade The core advantage of this indexable insert is the SH725 coating and substrate combination, designed to deliver stable cutting edges and consistent performance under fluctuating engagement conditions. The coated carbide composition provides toughness that reduces the risk of chipping during interrupted cuts and when using smaller toolholders. As a result, machining cycles become more predictable and tool change frequency is reduced, supporting a smoother production flow and lower unplanned downtime. Precise mounting and secure clamping for repeatable results Built to the ISO series format, the insert’s rhombic geometry and defined tolerances ensure compatibility with standard holders when the form, clearance, tolerance class, fixation, size and thickness match. The insert features a cylindrical hole with a one‑sided countersink (40°–60°) and an 11° clearance, which together enable reliable clamping and accurate seating on the backing pad or clamp set. This mechanical security improves vibration resistance and contributes to a consistent surface finish and tool life from one seat‑off to the next. Versatile application range and system integration Intended for general turning, the insert supports both external and internal operations; the 0.2 mm nose radius is optimised for fine surface quality while the 75° geometry assists chip formation in common turning tasks. Selection of the single‑sided chipbreaker and the SH725 grade should be matched to the workpiece material and machine stability for best results. Typical system assembly comprises the ISO insert, a matching external holder or boring bar, a backing pad/clamp set and spare screws, enabling fast replacement and minimal setup time at the machine. For reliable, high‑stability turning with the SH725 grade contact Metav Werkzeuge for availability and personalised application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737281 SKU: 6737281-Tungaloy Manufacturer SKU: TUN6737281 Model series: ISO‑Drehwendeschneidplatten Designation: EPGT040102 SH725 Tungaloy‑Wendeplatte Facts Size: 04 Thickness: 1.59 mm Clearance: 11° Nose radius: 0.2 mm Geometry angle: 75° Special features Grade/coating: SH725 Substrate: coated carbide Plate form: rhombic Hole: cylindrical hole with one‑sided countersink (40°–60°) Chipbreaker: single‑sided Typical system composition: ISO insert, outer holder or boring bar, backing pad/clamp set, spare screws Typical application: external and internal turning Suitable where small tools or changing engagement conditions occur FAQ What materials is this insert best suited for? The SH725‑grade coated carbide insert is formulated for broad material coverage and is particularly suitable where a tough cutting edge is required; material selection should be matched with the chipbreaker and machine stability. How does the hole style affect clamping? The cylindrical hole with a one‑sided countersink (40°–60°) ensures secure seating on standard backing pads and clamp sets, reducing micro‑movement and improving repeatability for the EPGT040102 insert. Can the insert be used for both external and internal turning? Yes, the ISO‑format rhombic insert is intended for both external and internal turning operations when paired with the appropriate holder or boring bar. What surface finish can be expected with a 0.2 mm nose radius? A 0.2 mm nose radius provides a balance between surface quality and tool strength; it is well suited for fine finishes while maintaining edge stability under common turning conditions. What should be considered when choosing the chipbreaker? Select the chipbreaker based on the workpiece material, depth of cut and machine rigidity; the single‑sided chipbreaker on this insert is optimised for stable chip control in typical turning scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com