EPGT 040102 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide SH725 grade, a 0.2 mm corner radius and a rhombic ISO 04 geometry to achieve stable chip control and consistent tool life; order the insert directly via Metav Werkzeuge or consult the team for holder matching and setup advice. EPGT040102 SH725 indexable insert for turning — Tungaloy EPGT040102 SH725 Tungaloy indexable insert for external and internal turning with rhombic ISO 04 form, single-sided chipbreaker and a cylindrical hole with one-sided countersink Coated carbide grade SH725 Rhombic ISO 04 geometry 0.2 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink High-performance grade for reliable turning results The EPGT040102 SH725 is an ISO-standard indexable insert manufactured for robust turning tasks where changing engagement conditions occur. The coated carbide construction and specific SH725 grade provide a balance between toughness and edge stability, making the insert particularly suitable for small tools and variable cuts. The coating enhances wear resistance while the base carbide ensures shock tolerance, which together extend tool life and reduce interruption in production. Precise geometry that supports surface quality The rhombic ISO 04 form combined with a 0.2 mm corner radius and 1.59 mm thickness delivers predictable contact geometry and surface finish. The specified 11° clearance (relief angle) controls cutting forces and helps avoid rubbing on the flank, while the 75° included angle governs approach and chipflow direction. These geometric parameters translate into fewer vibrations and an improved surface on the workpiece, which is especially beneficial when performing finishing passes on components machined from a range of steels and alloys. Design features that simplify clamping and chip control A cylindrical hole with a single-side countersink (40°–60°) ensures secure locating and repeatable seating in compatible holders. The one-sided chipbreaker promotes controlled chip segmentation for many turning scenarios; combined with the insert’s coated substrate, chip formation stays stable across interrupted cuts and varying depths of cut. The outcome is reduced risk of built-up edge and more consistent cycle times during batch production. Selection advice and system compatibility Compatibility with a chosen holder depends on the insert’s shape, relief angle, tolerance class, fastening method, size and thickness. Select the correct clamp style and screw set to match the ISO geometry and the insert’s hole/countersink arrangement; this prevents misalignment and ensures the SH725 grade performs as intended. For applications requiring repeatable results and easy index changes, pair the insert with holders designed for ISO rhombic 04 inserts and verify seating with the recommended torque and backing pads. Contact Metav Werkzeuge today for tailored holder recommendations and expert advice on applying the SH725 indexable insert — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737292 Manufacturer article number: 6737292 Manufacturer SKU: TUN6737292 SKU: 6737292-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: 040102 Name (without grade): EPGT040102 Application: Drehen Core dimensions Thickness: 1.59 mm Corner radius: 0.2 mm Relief (clearance) angle: 11° Included angle: 75° Insert size: 04 Countersink range: 40°–60° Materials & features Material: carbide (cemented carbide) Cutting material type: coated carbide Grade: SH725 Insert form: rhombic Chipbreaker: single-sided Hole: cylindrical hole with one-sided countersink Typical use: external and internal turning FAQ What materials is this insert suitable for? The answer depends on the selected grade and machining parameters; the SH725-coated carbide insert is designed for a broad range of turning tasks and offers good edge stability on many steels and alloys. How does the 0.2 mm corner radius affect finishing? A 0.2 mm corner radius produces a finer edge transition and helps achieve improved surface quality during finishing passes compared with larger radii. Is the insert compatible with standard ISO rhombic 04 holders? Yes, the insert follows ISO rhombic 04 geometry; compatibility requires matching holder design, fastening method and tolerance class. What is the purpose of the single-sided chipbreaker? The single-sided chipbreaker promotes predictable chip segmentation for turning operations, aiding chip evacuation and reducing the risk of tangling on the workpiece. How should the insert be clamped and indexed? Clamp the insert using a holder compatible with the cylindrical hole and countersink geometry, ensure correct seating and apply the recommended clamping torque to maintain repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide SH730 grade and a compact, ISO‑compatible rhombic geometry to improve tool life and process stability; order the EPGT 040102 SH730 indexable insert directly via Metav Werkzeuge or consult our advisers for holder matching. EPGT 040102 SH730 indexable insert for turning — rhombic 04 | Tungaloy The EPGT 040102 SH730 is an ISO‑standard rhombic indexable insert for external and internal turning, designed for stable cutting under varying engagement conditions and compact tool assemblies. ISO‑standard rhombic insert 04 Coated carbide grade SH730 0.2 mm corner radius for fine finishing Cylindrical hole with countersink 40°–60° Reliable machining performance with a robust coated carbide grade The insert is manufactured from coated carbide in the SH730 grade, a formulation optimised for toughness and a stable cutting edge. This material pairing reduces premature chipping during interrupted cuts and when using smaller toolholders, delivering consistent results in short‑batch and mixed‑operation environments. The hardened coating supports wear resistance, enabling predictable edge behaviour and longer in‑process life, which in turn lowers tooling costs per component. Geometry and dimensions that reduce vibration and improve repeatability Built to ISO specifications, the geometry includes a 75° included angle and a 11° relief angle, combined with a 0.2 mm corner radius and a plate thickness of 1.59 mm. These dimensions increase rigidity at the cutting zone and help to dissipate cutting forces evenly, which improves surface finish and dimensional accuracy. The compact form factor supports use in confined setups while maintaining an effective cutting edge for finishing and semi‑finishing operations. Practical mounting features for fast changeovers and secure clamping The insert is supplied with a hole, featuring a cylindrical hole and a single‑side countersink (40°–60°), which ensures secure fixing in compatible clamping systems. The rhombic 04 shape and single‑sided chipbreaker facilitate straightforward indexing and reorientation on external holders or boring bars. A complete system typically consists of the ISO insert, the matching external holder or boring bar, a shim/clamp set and replacement screws for immediate interchangeability and minimal downtime. Grade benefits and application suitability for productive turning The SH730 grade emphasises toughness and edge stability, making it particularly suitable where engagement conditions vary or when using smaller tool geometries. The combination of a dependable substrate and coating supports a wide range of turning tasks while maintaining consistent performance. When paired with a correctly selected holder and clamping arrangement, this insert contributes to productive machining with less risk of unexpected tool changeovers. For grade‑specific advice or to verify holder compatibility for this Tungaloy indexable insert, contact Metav Werkzeuge’s technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support and ordering. Technical data Article number: 6837513 Manufacturer SKU: TUN6837513 SKU: 6837513-Tungaloy Model series: ISO indexable turning inserts Designation: EPGT040102 Name: EPGT040102 SH730 Tungaloy insert Numbers / Core technical data Included angle: 75° Relief angle: 11° Corner radius: 0.2 mm Plate thickness: 1.59 mm Size: 04 Designs / Special features Shape: rhombic Grade: SH730 (coated carbide) Hole: with cylindrical hole + one‑sided countersink 40°–60° Chipbreaker: single‑sided Application: turning (external and internal) Compatibility: ISO holders, shim/clamp sets, replacement screws FAQ Is the insert compatible with standard ISO holders? Compatibility is determined by the insert form, relief angle, tolerance class, clamping method, size and thickness; the EPGT 040102 SH730 conforms to ISO standards for use with matching holders. What does the SH730 designation mean for performance? SH730 denotes a coated carbide grade focused on toughness and a stable cutting edge, suited to turning tasks where variable engagement and small tool geometries are common. Which dimensions should be checked before ordering? Check the included angle (75°), relief angle (11°), corner radius (0.2 mm), plate thickness (1.59 mm) and the hole/countersink style to ensure correct fitment. Can this insert be used for internal turning operations? Yes, the geometry and single‑sided chipbreaker make it suitable for both external and internal turning applications when paired with an appropriate boring bar or internal holder. What additional components are required to mount the insert? A compatible external holder or boring bar, the correct shim/clamp set and replacement screws are required to form the complete clamping system for the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 SH730 Wendeplatten - Tungaloy
Combine the SH730 grade’s edge stability with the coated cemented carbide construction and standardised ISO form for predictable, productive turning operations. Order this insert directly via Metav Werkzeuge or ask our consultants for application-specific advice. EPGT 040102 SH730 ISO turning insert for turning — Tungaloy EPGT040102 SH730 is an ISO rhombic turning insert designed for reliable external and internal turning with a tough, edge-stable coated carbide grade. Coated cemented carbide SH730 Rhombic 04 form, 75° geometry 11° clearance, 1.59 mm thickness Single-sided chipbreaker with hole Precision and compatibility for consistent machining The ISO standard form ensures consistent fitment in holders that match by shape, clearance angle, tolerance class, fastening and thickness, which reduces setup variability and improves repeatability. With an 11° clearance and a 75° cutting geometry, the insert gives a clear definition of the cutting edge orientation and predictable contact conditions. This predictability shortens adjustment time during tool changes and helps maintain process stability across batches. The rhombic 04 plate form and the standardised mounting ensure the insert integrates smoothly into established tool systems, supporting faster changeovers and consistent component quality. SH730 grade: toughness and edge stability for varied engagement The SH730 grade is a tough, edge-stable coated cemented carbide developed for turning operations where tool size or engagement conditions vary. The coating and substrate combination is selected to resist chipping and wear during interrupted cuts or fluctuating depths of cut; this translates into longer in-process life and fewer unscheduled tool changes. For applications with smaller tool bodies or changing entry angles, the grade’s toughness maintains a reliable cutting edge, helping to sustain cycle times and reduce scrap rates. In production terms, that means lower tool consumption and a steadier output. Geometry and chip control for improved surface finish The insert’s 0.2 mm corner radius and single-sided chipbreaker support controlled chip formation and a balanced cutting load, which contributes to a finer surface finish on external and internal profiles. The plate thickness of 1.59 mm combined with the rhombic geometry provides sufficient support for the cutting edge while allowing access in confined areas. The central cylindrical hole with a one-sided countersink (40°–60°) enhances clamping security in compatible holders and helps to maintain alignment under load. Together, these geometric details aid chip evacuation and reduce the risk of edge damage, supporting consistent part quality. Practical selection advice for turning applications Select the chipbreaker and grade to suit the workpiece material, machining strategy and machine stability; a tougher grade such as SH730 is preferable for interrupted cuts or variable engagement, while the chipbreaker choice affects chip flow and surface quality. Compatibility depends on matching the insert by form, clearance angle, tolerance and thickness to the chosen holder and clamping system. When these parameters are aligned, the result is a robust turning solution that balances productivity with predictable component quality and economical tool life. For tailored advice on using the Tungaloy SH730 inserts or to discuss holders and cutting parameters, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for practical, application-focused guidance. Technical data Article number: 6862157 SKU: 6862157-Tungaloy Manufacturer item number: TUN6862157 Model series: ISO turning inserts Material: coated cemented carbide Designation: EPGT040102 SH730 Tungaloy insert Core measurements Insert angle: 75° Clearance angle: 11° Plate thickness: 1.59 mm Plate size: 04 Corner radius: 0.2 mm Special features Rhombic 04 plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink 40°–60° ISO-standardised turning insert Coated cemented carbide, SH730 grade Designed for external and internal turning Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What is the primary application of this insert? The EPGT040102 SH730 insert is intended for turning, covering both external and internal operations where a rhombic insert form and a tough, edge-stable grade are advantageous. How does one ensure the insert fits the holder correctly? Compatibility is achieved by matching the insert’s form, 11° clearance, tolerance class, fastening method, size and 1.59 mm thickness to the holder specification; the cylindrical hole and countersink help secure clamping. What machining conditions suit the SH730 grade best? The SH730 grade is designed for varied engagement and smaller tool setups; its toughness and coating resist edge chipping during interrupted cuts and unstable entry conditions. Which geometry features aid chip control and surface finish? The rhombic 04 form, 0.2 mm corner radius and single-sided chipbreaker promote controlled chip formation and contribute to an improved surface finish on turned parts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 SH730 Wendeplatten - Tungaloy
Take advantage of stable edge control, consistent chip formation, and ISO compatibility for reliable turning cycles; the SH730 grade offers enhanced wear resistance and is especially efficient in smaller tools or variable engagement. Order directly via Metav Werkzeuge or consult their technical team for application-specific recommendations. EPGT 040102 SH730 indexable turning insert by Tungaloy — coated carbide, 11° relief The EPGT 040102 SH730 is an ISO‑standard rhombic indexable insert for external and internal turning, engineered for stable cutting with small‑tool setups and changing engagement conditions. ISO‑standard rhombic insert 04 size SH730 coated carbide for tough edges 11° relief angle for stable cutting Central hole with countersink for secure clamping Consistent performance where engagement varies The insert delivers repeatable cutting results even when the depth of cut or entry conditions fluctuate. The SH730 grade is a coated carbide formulation developed for edge stability and resistance to micro‑chipping; this reduces unscheduled tool changes and supports longer uninterrupted machining periods. By combining a robust grade with a rhombic geometry, the insert contributes to predictable tool life and steady cycle times in mixed production environments. Easy integration into ISO turning systems Compatibility is ensured by the ISO form and defined tolerances: the rhombic 04 format, 11° relief, and 1.59 mm thickness match standard holders and clamping kits. The insert features a central hole with a cylindrical bore plus a one‑side countersink (40°–60°), allowing secure fixation with standard screws and clamping sets. This system approach simplifies toolroom logistics and shortens changeover time between external and internal operations. Chip control and edge security for small‑tool turning A single‑sided chipbreaker and the grade’s toughness make the insert appropriate where small toolholders or intermittent cuts are used. The geometry and the coated carbide surface work together to shape chips and avoid entanglement, improving surface quality and reducing secondary deburring. Stable edge integrity under varying loads supports higher feed rates where process stability is required rather than maximal removal rates. Practical benefits for workshop productivity Choosing this insert supports cost‑effective machining through fewer tool regrinds and predictable replacement intervals. The ISO‑compliant design eases stocking and holder selection, while the SH730 coating extends serviceable life in many turning scenarios. In practice, the insert forms part of a system consisting of the ISO plate, an appropriate external holder or boring bar, a backing/clamping set and replacement screws, enabling fast maintenance and consistent clamping reliability. For expert advice on selecting the right Tungaloy SH730 insert for a specific turning task or to request a tailored supply from Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for direct support and availability. Technical data Article number: 6862168 Manufacturer SKU: TUN6862168 Brand: Tungaloy Designation: EPGT040102 Model series: ISO‑turning indexable inserts Material: cemented carbide Grade: SH730 Chipbreaker: single‑sided Hole style: cylindrical hole + one‑side countersink (40°–60°) Facts Size: 04 Thickness: 1.59 mm Relief angle: 11° Main angle: 75° Corner radius: 0.2 mm Radius: 0.2 mm Special features ISO‑standard rhombic insert Rhombic 04 geometry Central hole for secure clamping Single‑sided chipbreaker for controlled chips Coated cemented carbide for edge stability Designed for external and internal turning Compatible with standard holders and clamping sets FAQ What turning tasks is this insert designed for? The EPGT040102 SH730 insert from Tungaloy is intended for external and internal turning where stable edges and consistent chip control are required, particularly in small‑tool or varying engagement applications. How is compatibility with holders determined? Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; the ISO‑compliant geometry and the central hole with countersink allow use with matching holders and standard clamping kits. Which benefits does the SH730 grade provide? The SH730 coated carbide grade offers toughness and edge stability, reducing micro‑chipping and improving tool life under intermittent loads and changing engagement conditions. How should the insert be clamped in the tool system? The insert uses a central cylindrical hole with a one‑side countersink (40°–60°) and requires a matching screw and clamping set; correct clamping ensures repeatable performance and secure fixation. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
EPGT 040102 SH730 Wendeplatten - Tungaloy
Take advantage of the proven combination of a tough, SH730 carbide grade and a precise 0.2 mm corner radius for reliable edge life and consistent surface finish; order the insert directly via Metav Werkzeuge or consult the technical team for holder compatibility. EPGT040102 SH730 Tungaloy indexable turning insert — turning, rhombic 04, ISO 040102 The EPGT040102 SH730 Tungaloy insert is an ISO rhombic indexable insert engineered for external and internal turning, offering stable cutting-edge performance and dependable chip control in variable engagement conditions. SH730 grade for stable cutting edges Rhombic 04 geometry, 75° cutting angle 0.2 mm corner radius for fine finishing Single-sided chipbreaker with centre hole Proven grade for consistent productivity The coated cemented carbide SH730 grade combines toughness with cutting-edge stability, designed to maintain edge integrity under fluctuating cutting conditions. This specification supports productive turning cycles and reduces downtime caused by unexpected edge failures. As a result, workshops benefit from improved process reliability and steady part quality when machining steels and mixed batches where tool engagement varies. The composition and coating technology provide a balance between wear resistance and shock tolerance, making this insert suitable for demanding, production-oriented environments. Geometry and chip control that protect surface quality The rhombic 04 shape with a 75° approach and 11° relief offers a versatile cutting geometry that improves insert life and surface finish in both external and internal turning operations. The single-sided chipbreaker and the central hole with a cylindrical bore plus a single-sided countersink (40°–60°) support secure locating and repeatable clamping, reducing vibration and supporting controlled chip flow. A 0.2 mm corner radius helps achieve finer finishes and tighter tolerances, especially on smaller-diameter tools. Compatibility with holders is determined by form, clearance angle, tolerance class, fastening method, size and plate thickness. System compatibility and workshop handling to ease assembly The insert is supplied in the ISO series format and integrates into standard clamping systems consisting of a matching external holder or boring bar, support shim/clamping set and replacement screws. With a 1.59 mm plate thickness and a centred hole, the component offers straightforward retrofit into existing toolrooms where ISO indexable tooling is used. The SKU and manufacturer article number simplify reordering and inventory management, while the grade choice and chipbreaker type guide selection for specific materials and cutting strategies. For small tools or frequently changing engagement, this insert’s balanced design aids consistent machining results. For reliable edge stability in production turning, request the Tungaloy SH730 EPGT040102 insert from Metav Werkzeuge or contact the team at info@metav-werkzeuge.com / +49 2822 7131930 for application advice and holder compatibility Technical data Article number: 6862167-Tungaloy Manufacturer SKU: TUN6862167 Manufacturer article number: 6862167 Designation: EPGT040102 Series: ISO turning indexable inserts Material: cemented carbide Grade/coating: SH730 Application: Turning Plate form: rhombic Plate size: 04 Plate thickness: 1.59 mm Facts Corner radius: 0.2 mm Cutting angle: 75° Relief angle: 11° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided SKU: 6862167-Tungaloy Special features Coated cemented carbide grade SH730 ISO-compliant turning indexable insert Rhombic 04 geometry for versatile turning Single-sided chipbreaker for consistent chip control Designed for small tools and variable engagement conditions Compatibility depends on holder form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? The EPGT040102 SH730 insert is specified for general turning tasks and performs well on a wide range of steels and mixed batches owing to the tough SH730 grade. Which holders are compatible with the insert? Compatibility requires a matching ISO rhombic holder designed for 04-size plates; holder selection must account for form, clearance angle, tolerance class, fastening method and plate thickness. How does the chipbreaker affect performance? The single-sided chipbreaker on this insert provides controlled chip formation and evacuation, which helps to stabilise cutting forces and improve surface finish during turning. Can the insert be used for internal boring? Yes, the rhombic geometry and the 75° cutting angle support both external and internal turning when paired with a suitable boring bar and proper clamping. What is the significance of the 0.2 mm corner radius? A 0.2 mm corner radius balances finishing capability with edge strength, allowing finer surface finishes while maintaining robustness in many turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 TH10 Wendeplatten - Tungaloy
Benefit from the combination of a sharp TH10 uncoated carbide grade, a rhombic 04 geometry with 75° lead angle and an 11° clearance that together reduce cutting forces and improve surface quality; order the EPGT040102 TH10 insert directly via Metav Werkzeuge or contact our consultants for application advice. EPGT 040102 TH10 indexable turning insert – rhombic 04, 75° | Tungaloy The EPGT040102 TH10 indexable insert is designed for external and internal turning, featuring a rhombic 04 shape, a 75° geometrical angle and an 11° clearance for stable, low-force machining. Uncoated carbide for low cutting forces Rhombic 04 with 75° geometrical angle Single-sided chipbreaker for neat chips Cylindrical hole with one-sided countersink Consistent, low-force machining for non‑ferrous components The insert’s key advantage is the uncoated TH10 carbide grade, a sharp universal formulation optimised for non‑ferrous materials and operations where a clean edge reduces built-up edge and cutting forces. The sharp cutting edge helps achieve a clean surface finish with lower feed forces, which benefits parts that demand dimensional accuracy and minimal post‑process work. The single-sided chipbreaker controls chip form in turning operations, making swarf control more predictable and reducing interruptions during production. For workshops seeking efficiency in everyday turning tasks, this geometry delivers measurable improvements in cycle stability. ISO compatibility and secure clamping for reliable setup The insert conforms to ISO standard dimensions and is intended for use with matching external holders or boring bars; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. The presence of a cylindrical hole with a one-sided countersink (40°–60°) ensures a reliable mechanical location and repeatable clamping in standard toolholders. The rhombic shape with a 0.2 mm corner radius and 1.59 mm thickness provides predictable edge strength while maintaining the ability to machine fine features. Specifying holders that match the ISO form and tolerance class reduces setup time and enhances repeatability across production batches. Practical application guidance to select the right setup This grade and geometry combination is intended for turning operations where low cutting forces and good surface quality are priorities. The insert is suitable for both external and internal turning; selection of the chipbreaker and the cutting edge radius should be aligned to material, machining stability and the desired surface finish. In less rigid setups, a slightly larger corner radius or more positive holder geometry can increase robustness, while stable machines and rigid fixturing can exploit the sharper edge of this grade to reduce cycle times. The indexable design allows quick index changes, lowering downtime and supporting a continuous workflow. Operational benefits and workshop integration Adopting this insert supports a productive turning strategy through simple indexability, standardised ISO mounting and a grade that avoids coating-related edge buildup in specific materials. The combination of a sharp uncoated edge and a dedicated chipbreaker improves chip control and reduces secondary operations, which in turn supports consistent throughput. For shops aiming to standardise tooling across multiple turning centres, the ISO conformity and repeatable clamping characteristics simplify inventory and training requirements while maintaining machining quality. Contact Metav Werkzeuge for cutting data, availability and tailored recommendations for the Tungaloy EPGT040102 TH10 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6804313 SKU: 6804313-Tungaloy Manufacturer SKU: TUN6804313 ISO designation: EPGT040102 Model series: ISO indexable turning inserts Material: carbide Core specifications Size: 04 Plate form: rhombic Lead angle: 75° Clearance (free) angle: 11° Corner radius: 0.2 mm Plate thickness: 1.59 mm Special features Grade: TH10 (uncoated carbide) Chipbreaker: single-sided Hole: with cylindrical hole + one-sided countersink (40°–60°) Typical applications: external and internal turning Compatibility note: holder compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The EPGT040102 TH10 insert is optimised for non‑ferrous materials and applications where an uncoated cutting edge supports low cutting forces and a clean surface finish. Can the insert be used for both external and internal turning? Yes, the insert is intended for external and internal turning; successful application depends on choosing the correct chipbreaker and ensuring sufficient toolholder rigidity. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius balances edge strength and surface finish—small enough to produce fine detail yet sufficient to withstand standard cutting loads when used in appropriate setups with ISO‑matched holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of uncoated carbide performance, 75° rhombic geometry and a fine 0.2 mm corner radius for consistent turning results; order this insert via Metav Werkzeuge or consult our specialists for application advice. EPGT 040102 TH10 indexable turning insert — Tungaloy, uncoated carbide, 75° rhombic EPGT 040102 TH10 is an ISO-standard indexable insert designed for general turning, offering a sharp uncoated cutting edge for low cutting forces and clean surface results ISO 040102 standard format Uncoated carbide TH10 grade 75° rhombic geometry for versatile turning Single-sided chipbreaker for controlled chips Consistent compatibility for predictable clamping and repeatability The ISO-format geometry and defined dimensions ensure repeatable seating and simple integration into standard holders. The combination of ISO 040102 designation, rhombic 04 size and the specified relief angle means compatibility is governed by form, relief geometry, tolerance class, fastening method, size and thickness — factors that facilitate fast, reliable changeovers on the shop floor. This predictable interface reduces setup time and supports a steady production flow with fewer interruptions. Low cutting forces and a clean finish for non-ferrous applications Manufactured from uncoated carbide in the TH10 grade, the insert provides a sharp cutting edge that lowers cutting forces and helps produce cleaner surface finishes, especially when machining non-ferrous materials. The single-sided chipbreaker promotes controlled chip formation and evacuation, which in turn reduces the risk of built-up edge and surface damage. For operations where minimal cutting force and tidy part appearance are priorities, this geometry and grade offer a practical advantage. Compact dimensions that balance rigidity and access With a thickness of 1.59 mm, a corner radius of 0.2 mm and a free angle of 11°, the insert is optimised for applications demanding a fine edge and good access in tight profiles. The cylindrical hole with a single-sided countersink (40°–60°) ensures secure fastening in compatible clamping sets, while the 75° approach angle of the rhombic shape supports both external and internal turning tasks. These dimensional choices balance edge strength and the ability to achieve fine surface finishes. Practical application guidance for workshop use Intended primarily for turning, the insert is most effective when matched with a suitable external holder or boring bar and an appropriate clamp kit. Selecting the correct chipbreaker and TH10 grade will depend on material and machining stability; the combination here is engineered to suit non-ferrous components and finishing passes where a sharp edge and low forces are beneficial. If process stability or tool life optimisation is required, pairing this insert with a rigid toolholder and controlled cutting parameters will yield the best results. For reliable supply of genuine Tungaloy indexable inserts, request the EPGT 040102 TH10 from Metav Werkzeuge or speak to our application consultants at Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6804317 SKU: 6804317-Tungaloy Manufacturer SKU: TUN6804317 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Geometry angle: 75° Size: 04 Thickness: 1.59 mm Corner radius: 0.2 mm Free angle: 11° Special features Material: carbide (uncoated) Grade: TH10 Chipbreaker: single-sided Plate form: rhombic Hole: with cylindrical hole and one-sided countersink (40°–60°) FAQ What materials is this insert suitable for? The EPGT 040102 TH10 insert is optimised for non-ferrous materials and operations where an uncoated, sharp cutting edge reduces cutting forces and improves surface finish. Is the cutting edge coated? No, the insert is an uncoated carbide grade (TH10), designed to offer a very sharp edge for low-force cutting and clean results. How is the insert secured in the holder? The insert features a cylindrical hole with a single-sided countersink (40°–60°), allowing secure clamping in compatible holders and clamping sets designed for ISO 040102 geometry. Which turning operations are appropriate for this insert? The design suits both external and internal turning, particularly finishing passes or machining of softer, non-ferrous alloys where reduced cutting force and controlled chip form are desired. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040102 UX30 Wendeplatten - Tungaloy
Take advantage of a sharp-edge UX30 grade and the compact rhombic 04 geometry to achieve low cutting forces and reliable chip formation; the slim 1.59 mm thickness and 0.2 mm corner radius support fine finishing in both external and internal turning. Order the insert directly via Metav Werkzeuge or consult the technical team for holder compatibility and application pairing. EPGT040102 UX30 Tungaloy indexable turning insert — uncoated carbide, rhombic 04, 11° clearance The EPGT040102 is an ISO-standard rhombic indexable insert designed for precision external and internal turning applications where low cutting forces and controlled chip formation are required ISO-standard rhombic 04 geometry Sharp-edge UX30 grade for low cutting forces Cylindrical hole with single-sided countersink 0.2 mm corner radius for improved surface finish High-efficiency turning with a sharp UX30 grade This insert combines a sharp cutting edge with an uncoated carbide substrate to reduce cutting forces and promote predictable chip breakage. The UX30 grade is engineered for operations where minimised cutting resistance and consistent chip formation make the process more productive; because the grade is uncoated, it performs well where abrasive wear is moderate and edge integrity is paramount. The result is improved cycle times on light to medium turning tasks and fewer interruptions for rework. Precise mounting and compatibility for stable machining Designed to ISO standards, the geometry, 11° clearance angle, tolerance class and thickness must match the chosen holder to ensure clamping security and repeatable positioning. The rhombic 04 form and the cylindrical hole with single-sided countersink (40°–60°) facilitate secure fastening and straightforward indexation, so changeovers are efficient and tool life is reproducible. Because correct holder pairing determines performance, compatibility is verified by form, free angle, fastening type, size and thickness. Chip control and surface quality in demanding operations A one-sided chipbreaker combined with the 0.2 mm corner radius helps to shape chips and reduce the risk of built-up edge, contributing to a finer surface finish on turned components. The 1.59 mm plate thickness and the rhombic geometry support controlled engagement in narrow depths of cut, making the insert suitable for finishing passes or where tight tolerances are required. The design therefore balances chip control and dimensional stability for consistent part quality. Practical benefits for production-oriented workshops The insert is part of an ISO-series system concept that pairs with matched holders, shim sets and clamping screws, enabling quick replacement and straightforward inventory management. Its uncoated carbide body provides a stable cutting edge that is resilient in face of intermittent cutting conditions and small interruptions. For machinists and production planners this translates into predictable tool behaviour and easier process planning, reducing setup time and increasing shop-floor uptime. Contact Metav Werkzeuge for a tailored holder recommendation or to secure supply of the EPGT040102 UX30 insert; Metav Werkzeuge’s specialists can advise on optimal clamping and cutting parameters to suit the workpiece material and process. Technical data Article number: 6804314 Manufacturer SKU: TUN6804314 SKU: 6804314-Tungaloy Brand: Tungaloy Type designation: EPGT040102 UX30 Material: cemented carbide Numbers / Core technical data Corner radius: 0.2 mm Clearance angle: 11° Thickness: 1.59 mm Insert size: 04 Included angle: 75° Designs / Special features ISO-indexable turning insert series Uncoated carbide grade UX30 Rhombic 04 plate form Cylindrical hole with single-sided countersink (40°–60°) One-sided chipbreaker For external and internal turning FAQ What materials is this insert suitable for? The EPGT040102 UX30 insert is intended for general turning tasks; the UX30 uncoated carbide grade offers good chip formation and low cutting forces for a broad range of steels and non-hard materials. How should the insert be mounted for best results? Mounting must match the ISO holder form, clearance angle and thickness; the rhombic geometry and cylindrical hole with countersink require a compatible clamping seat and fastening screw for secure positioning. Can this insert be used for finishing passes? Yes, the 0.2 mm corner radius and slim 1.59 mm thickness make the insert well suited to finishing and light material removal where surface quality is important. What is the benefit of the uncoated carbide UX30 grade? The UX30 grade provides a sharp, stable cutting edge that reduces cutting forces and promotes consistent chip formation, which is advantageous in applications prioritising edge integrity over high-temperature resistance. Is the insert compatible with standard ISO toolholders? The plate conforms to ISO dimensions; compatibility is determined by matching the insert form, free angle, tolerance and thickness with the toolholder specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040104 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard compatibility, GH110 wear resistance and a compact 0.4 mm corner radius for consistent turning performance; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. EPGT 040104 GH110 Tungaloy indexable turning insert — for turning A EPGT040104 GH110 insert engineered for ISO‑standard external and internal turning, offering a rhombic 04 form with 11° clearance for predictable chip formation and secure clamping. ISO‑standard rhombic insert 04 GH110 grade for wear resistance One‑sided chipbreaker with through hole 11° clearance, 0.4 mm corner radius Reliable fit and predictable integration for production workflows The insert is an ISO‑standard indexable turning insert, designed so that compatibility with the toolholder is governed by form, clearance, tolerance class, fixing method, size and thickness. This clear separation of interface parameters simplifies procurement and replacement: when the holder matches these parameters, the insert seats precisely, enabling repeatable cutting performance and reducing setup time. For shops requiring consistent changeover, the standardised geometry supports rapid tool exchanges and predictable process control. Material grade and cutting performance that extend tool life Equipped with the GH110 Tungaloy carbide grade, the cutting edge combines enhanced wear resistance with sufficient toughness to withstand intermittent loads. The result is a longer effective life of the cutting edge and a steadier surface finish over extended production runs. The carbide substrate and the chosen grade help maintain edge stability in mixed turning tasks, so fewer interruptions for insert changes are needed and part quality remains reproducible. Geometry that balances surface quality and chip control The rhombic 04 shape together with an 11° clearance and a one‑sided chipbreaker delivers reliable chip formation for many turning tasks. The 0.4 mm corner radius provides a compromise between finishing capability and robustness: a small radius improves surface finish while still offering sufficient edge strength for semi‑finishing cuts. The insert thickness of 1.59 mm contributes to negative rake stiffness and supports stable cutting under varying radial depths, which benefits both conventional lathes and CNC turning centres. Practical applications and process advantages for machine shops Intended for external and internal turning, this indexable insert is suitable for general production and jobbing environments that require predictable results and good edge life. By choosing the appropriate chipbreaker and taking the GH110 characteristics into account, machining efficiency and process security can be improved. For operations seeking measurable productivity gains, the stable cutting edge and standardised form support higher machine uptime and consistent component quality. Contact Metav Werkzeuge for tailored selection advice on Tungaloy GH110 inserts and to ensure the optimal holder and grade match for the intended turning application; Metav Werkzeuge can assist with technical recommendations and delivery. Technical data Article number: 6804318 Manufacturer SKU: TUN6804318 Internal SKU: 6804318-Tungaloy Core data Corner radius: 0.4 mm Clearance angle: 11° Thickness: 1.59 mm Size: 04 Approach angle: 75° Design & features Shape: rhombic (04) Hole: cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: one‑sided Grade: GH110 (Tungaloy carbide) Intended application: turning (external and internal) Standard: ISO‑normed insert, compatibility by form/clearance/size FAQ What operations is this insert intended for? The EPGT040104 GH110 insert is intended for turning operations, including both external and internal turning tasks. How is compatibility with a toolholder ensured? Compatibility is determined by form, clearance, tolerance class, fixing method, size and thickness; the EPGT040104 requires a holder that matches these parameters for a secure fit. What is the corner radius and how does it affect finish? This insert has a 0.4 mm corner radius, which supports improved surface finish while maintaining sufficient edge strength for semi‑finishing cuts. Does the insert include a hole and what is its style? Yes — the insert features a cylindrical hole with a one‑side countersink (40°–60°) to accommodate standard clamping and secure fastening. Which carbide grade is used and what are its benefits? The GH110 Tungaloy grade provides a balance of wear resistance and toughness, supporting consistent edge life and stable cutting performance across varied turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040104 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of wear resistance, stable chip control and ISO compatibility to maintain a smooth turning process; the GH110 grade and rhombic 75° geometry support consistent results and extended tool life. Order directly via Metav Werkzeuge or consult our specialists for application guidance. EPGT 040104 GH110 Tungaloy turning insert — rhombic ISO insert, 75° EPGT040104 GH110 is an ISO-standard rhombic turning insert designed for precision external and internal machining in general turning applications. ISO rhombic insert, 75° principal cutting edge GH110 grade for wear resistance and toughness Cylindrical hole with one-sided countersink 0.4 mm corner radius, 1.59 mm thickness Consistent cutting performance through optimized grade and geometry The GH110 grade from Tungaloy combines wear resistance and edge toughness to deliver repeatable results in production turning. The rhombic 75° main cutting edge and the 0.4 mm corner radius reduce cutting forces while maintaining a robust edge, which translates into longer service cycles and fewer indexings. This balancing of properties supports stable surface finish and dependable dimensional control when machining shafts, shoulders and profiles. Selecting the correct chipbreaker and holder setup further improves chip evacuation and process reliability. Precise fit and repeatable clamping for accurate parts The insert’s ISO-standard geometry ensures compatibility with a wide range of external holders and boring bars; fit is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness. The 1.59 mm thickness and rhombic form provide a compact, rigid contact area that reduces vibration in light to medium-duty turning. A cylindrical hole with one-sided countersink (40°–60°) secures positive clamping and simplifies replacement, while the nominal 11° relief angle aids clearance and reduces rubbing on complex contours. Together, these features make the system easier to set up and maintain, supporting consistent tolerances across batch runs. Flexible integration across turning tasks and materials Intended for external and internal turning, the insert accepts a single-sided chipbreaker and is suitable for a range of materials when the correct chip control and cutting data are selected. The carbide substrate and GH110 surface characteristics provide good generality: the grade performs well where a mix of wear resistance and edge stability is required. In practice, the insert is part of a system—indexable insert, matching holder or boring bar, shim/clamp set and replacement screws—which allows rapid adaptation to different batch sizes and component geometries. This flexibility shortens downtime and contributes to a more productive workshop flow. For reliable turning performance with the Tungaloy GH110 insert, contact Metav Werkzeuge for tailored application advice or to place an order at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Designation: EPGT040104 GH110 Manufacturer article number: 6804323 SKU: 6804323-Tungaloy Manufacturer SKU: TUN6804323 Model series: ISO turning inserts Facts Corner radius: 0.4 mm Relief angle: 11° Thickness: 1.59 mm Size: 04 Main cutting-edge angle: 75° Special features Material: carbide Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Intended application: turning (external and internal) System components: insert, suitable outer holder or boring bar, shim/clamp set, replacement screws Grade/coating: GH110 by Tungaloy FAQ What materials is this insert suitable for? The EPGT040104 GH110 insert is a carbide indexable insert designed for turning; the GH110 grade provides a balance of wear resistance and toughness suitable for a wide range of steels and mixed material batches when paired with the appropriate chipbreaker. How does the rhombic 75° geometry affect machining? A rhombic 75° insert offers a compromise between strength and access: the geometry provides a sturdy cutting edge for general turning while enabling turning of shoulders and mouldings with good surface finish when correctly set up. What does the cylindrical hole with countersink improve? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and accurate repeatability in the tool pocket, reducing movement under load and simplifying fast replacement in the clamping system. Can this insert be used for internal and external turning? Yes, the insert is intended for both external and internal turning; compatibility with the holder must be checked for form, clearance, tolerance class, fastening, size and thickness to ensure correct seating. Which components are needed to assemble a working system? A complete system comprises the indexable insert, a matching outer holder or boring bar, an appropriate underlay/shim and clamp set, plus replacement screws; together they deliver the necessary rigidity and repeatability for consistent production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040104 GT9530 Wendeplatten - Tungaloy
High wear resistance and an optimised chipformer combine to deliver consistent surface quality and longer tool life in stable turning operations; the ISO compatibility ensures straightforward replacement in standard holders. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific data. EPGT 040104 GT9530 — Tungaloy turning insert (ISO rhombic 04, coated cermet) A Tungaloy EPGT 040104 GT9530 indexable turning insert engineered for finishing and light universal turning of steel, offering improved surface finish and extended service life. Coated cermet grade GT9530 ISO rhombic 04 geometry 0.4 mm corner radius Cylindrical hole + single-sided countersink Enhanced productivity through wear-resistant coated cermet The coated cermet composition of this grade, GT9530, is designed to combine wear resistance with a fine contact edge, making it particularly effective for applications where a high-quality surface finish matters. In practice, this means fewer parts rejected for surface defects and longer intervals between indexings, which supports a smoother production flow. The cermet coating also helps to reduce built-up edge when turning steels, translating into more consistent component dimensions and less rework. Geometry and fit that simplify tooling decisions The insert’s ISO rhombic 04 form and the specified 11° clearance (frewinkel) permit a wide range of standard ISO holders to be used, provided the holder matches the insert size, thickness and fastening arrangement. The 0.4 mm radius supports fine finishing operations while the 1.59 mm thickness and cylindrical hole with single-sided countersink (40°–60°) ensure reliable clamping and repeatable positioning. Explaining the geometry in this way helps to select the matching toolholder and to anticipate achievable feed and depth values for stable turning. Recommended applications and machining strategy Intended primarily for turning—both external and internal—the insert is best applied in stable setups and steady-state cuts where a fine finish or longer stand time is required. The single-sided chipbreaker promotes controlled chip formation in typical steel grades; selecting the appropriate cutting data for material, rigidity and machine power will maximise life. The grade is suited to finishing and light general-purpose turning rather than heavy interrupted cuts, so pairing the insert with a rigid holder and correct coolant strategy will further improve results. Practical benefits: tool life, process reliability and support Using a reliable indexable insert reduces unplanned stoppages and simplifies tool inventory management. The combination of GT9530 metallurgy and ISO standardisation yields predictable wear behaviour and repeatable part quality, supporting production planning and cost calculations. For detailed cutting parameters, material compatibility or to confirm holder matching, Metav Werkzeuge provides technical advice and datasheets to support implementation and to help achieve the intended process benefits. Contact Metav Werkzeuge for tailored cutting data, availability of Tungaloy EPGT 040104 GT9530 inserts and application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997898 Manufacturer SKU: TUN6997898 Stock SKU: 6997898-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Core specifications Insert designation: EPGT040104 Grade/sorte: GT9530 (coated cermet) Corner radius: 0.4 mm Clearance angle: 11° Insert angle: 75° Thickness: 1.59 mm Size: 04 Features Rhombic insert shape Cylindrical hole with single-sided countersink (40°–60°) One-sided chipbreaker With hole (for positive clamping systems) Application: turning (external and internal) Suitable for finishing to light universal turning of steel ISO compatibility for standard holders and toolblocks FAQ What materials is this insert best suited for? The Tungaloy EPGT 040104 GT9530 insert is formulated as a coated cermet grade optimised for turning steel, delivering good surface finish and extended life in stable conditions. How does the 0.4 mm corner radius affect machining? A 0.4 mm radius favours improved surface integrity and a refined edge profile, making the insert suitable for finishing passes and applications where dimensional accuracy is important. Which holder features are required for correct fitment? Correct fitment depends on matching the ISO form, insert size and 1.59 mm thickness; the cylindrical hole with single-sided countersink requires a compatible clamping arrangement and fastening screws sized for that hole type. Is this grade suitable for heavy-duty interrupted cuts? The GT9530 grade is intended for stable finishing to light universal turning; it is not primarily designed for heavy interrupted cuts—rigidity and choice of a more robust grade would be advised for such conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040104 J740 Wendeplatten - Tungaloy
Take advantage of the combination of an industry-proven Tungaloy J740 grade and a compact 0.4 mm nose radius to achieve reliable surface quality and consistent tool life in turning operations; order directly via Metav Werkzeuge or consult their specialists for application support. EPGT040104 J740 Tungaloy indexable insert — ISO turning insert with 0.4 mm radius and 11° clearance The EPGT040104 J740 Tungaloy indexable insert is an ISO-standard rhombic insert for external and internal turning, offering a balanced mix of wear resistance and edge stability for a wide range of applications. EPGT 040104 ISO rhombic insert J740 Tungaloy carbide grade for turning 0.4 mm nose radius for fine finishing Single-sided chipbreaker, hole with countersink Faster throughput through an optimised grade and geometry The combination of the J740 cutting grade and cemented carbide substrate is engineered for productive turning where a balance of wear resistance and toughness is required. The material selection reduces flank wear under varied cutting conditions, which in turn extends interval lengths between indexings and tool changes. As a result, cycle times are shortened and machine utilisation improves. The tested composition of the grade supports both roughing and finishing applications when paired with a suitable holder and cutting data adjusted to component geometry. Reliable fit and repeatable accuracy with ISO compatibility Compatibility with clamping systems is determined by form, clearance angle, tolerance class, fastening, size and thickness. The rhombic shape with a 75° cutting orientation and 11° clearance ensures predictable seating in ISO holders; the insert thickness of 1.59 mm and the cylindrical hole with a one-sided countersink (40°–60°) provide secure clamping and repeatable assembly. For shops standardising on ISO tooling, this insert eases tool inventory management and reduces setup variability, thereby improving process reliability and dimensional consistency on turned components. Controlled chip formation and surface finish improvements The single-sided chipbreaker and the small 0.4 mm nose radius are designed to influence chip flow and minimise vibration on light to medium cuts, producing a finer surface finish with reduced burr formation. When an appropriate chipbreaker and grade are chosen for the workpiece material and the machine’s rigidity, chip control improves and post-process cleaning is reduced. For internal turning and confined geometries, the compact nose radius helps preserve profile accuracy while still delivering good edge life under stable cutting conditions. Practical system advice for efficient integration This insert belongs to a system comprising the ISO insert, a matching outside holder or boring bar, a backing shim/clamp set and replacement screws. Selection of a holder with the correct geometry and rigidity is essential to exploit the J740 grade’s benefits; where stability is limited, reduce cutting depth or choose a more robust geometry. The EPGT040104 is intended for general turning operations — selecting the chipbreaker and insert grade to match workpiece material and cutting mode will yield the best balance of economy and performance. The insert’s design supports process standardisation across small-batch and serial production alike. For tailored application advice and immediate availability, contact Metav Werkzeuge for guidance on the Tungaloy J740 insert and to secure the EPGT040104 via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6821733 SKU: 6821733-Tungaloy Manufacturer SKU: TUN6821733 Brand: Tungaloy Designation: EPGT040104 Facts Radius: 0.4 mm Clearance angle: 11° Insert size: 04 Thickness: 1.59 mm Cutting orientation: 75° Special features Material: Cemented carbide Grade: J740 (Tungaloy) Plate form: Rhombic Chipbreaker: Single-sided Hole: Cylindrical hole + one-sided countersink (40°–60°) Application: External and internal turning System components: Insert, holder/bohrstange, backing shim/clamp set, replacement screws Compatibility criteria: Form, clearance angle, tolerance class, fastening, size, thickness FAQ What materials can this insert machine effectively? The Tungaloy J740 EPGT040104 insert is designed as a general-purpose turning grade; it performs well on a wide range of steels and common engineering materials when cutting data and chipbreaker are matched to the workpiece and operation. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO specifications for rhombic turning inserts; compatibility depends on the holder’s form, clearance angle and tolerance class, as well as size and thickness matching. What is the benefit of the 0.4 mm nose radius? A 0.4 mm nose radius provides improved surface finish and profile fidelity on light to medium cuts while maintaining acceptable edge strength for general turning tasks. How does the J740 grade influence productivity? The J740 grade offers a balanced mix of wear resistance and toughness, which extends tool life under mixed cutting conditions and contributes to fewer indexings and longer productive runs. Which chipbreaker should be chosen for roughing vs finishing? For the EPGT040104, choose a more aggressive chipbreaker and higher feed for roughing; for finishing, a finer chipbreaker combined with the small nose radius will yield better surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040104 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp cermet cutting edge and a compact 0.4 mm corner radius for dependable finishing operations; order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. EPGT040104 040104 NS9530 Tungaloy indexable turning insert — rhombic 75° The EPGT040104 NS9530 is an ISO‑standard rhombic indexable insert designed for precision turning and finishing of steel components. ISO‑standard rhombic insert, 75° geometry Uncoated cermet NS9530 for high surface finish Single‑sided chipbreaker for continuous cuts 0.4 mm corner radius for precise profiling Precision finishing enabled by cermet technology The uncoated cermet NS9530 grade delivers a sharp cutting edge with low cutting forces, making it particularly effective for finishing passes on steel where surface quality is critical. Cermet combines ceramic hardness with metallic toughness, which means improved wear resistance and consistent surface finish during continuous cuts and small depth‑of‑cut operations. The ISO conformity ensures predictable seating and repeatable results across standard holders, reducing setup time and the need for trial adjustments. Geometry that secures consistent profiles and accuracy The rhombic 75° geometry and 0.4 mm corner radius provide controlled engagement and accurate profile transfer, especially for fine contour work and small radii features. The insert’s 11° clearance angle supports stable cutting conditions and limits rubbing on the flank, while the modest thickness contributes to reliable clamping in the seat. These geometric choices translate into fewer reworks and a steady part finish when used as a finishing grade in turning operations. Easy integration into existing turning systems The insert is supplied as an ISO‑standard indexable plate and fits into a system comprising a matching external holder or boring bar, an underlay/clamping set and replacement screws. The component is designed with a cylindrical hole plus a one‑sided countersink (40°–60°) for secure fastening. Selection of the chipbreaker and grade should match the workpiece material, machining style and machine stability; this grade is optimised for continuous cuts and small feeds. For application or compatibility checks, Metav Werkzeuge provides technical advice and detailed data to ensure the insert integrates smoothly with the chosen tooling system. For precision finishing with Tungaloy cermet technology, contact Metav Werkzeuge for tailored advice or to place an order: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6998036 Manufacturer SKU: TUN6998036 Seller SKU: 6998036-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: EPGT040104 NS9530 Tungaloy insert Core data Corner radius: 0.4 mm Geometry/included angle: 75° Clearance angle: 11° Plate thickness: 1.59 mm Plate size: 04 Special features Uncoated cermet grade NS9530 Single‑sided chipbreaker Rhombic plate form Cylindrical hole with one‑sided countersink (40°–60°) Material: cemented carbide Application: Turning — external and internal finishing System components: ISO insert, matching external holder/boring bar, underlay/clamping set, replacement screws FAQ Which materials is this insert suitable for? The EPGT040104 NS9530 insert is specified as a finishing grade for steel and performs best on continuous cuts and small depth‑of‑cut finishing operations. Can this insert be used for internal turning operations? Yes — the insert is suitable for both external and internal turning when mounted in an appropriate boring bar or holder that accepts ISO‑standard rhombic plates. How is holder compatibility ensured? Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and plate thickness; the EPGT040104 conforms to ISO dimensions to simplify matching with standard external holders and boring bars. Is the cutting material coated? No — this grade is an uncoated cermet (NS9530) designed to offer a sharp edge and superior surface finish for finishing passes. What benefits does the 0.4 mm corner radius provide? A 0.4 mm corner radius improves profile control and helps achieve repeatable part geometry while limiting cutting forces during fine finishing. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
EPGT 040104 NS9530 Wendeplatten - Tungaloy
Combining the NS9530 cermet finishing grade, a 0.4 mm corner radius and ISO 040104 compatibility, this insert delivers consistent high‑quality surface finishes with low cutting forces for continuous turning. Order directly via Metav Werkzeuge or consult the specialists for the ideal holder and clamping configuration. EPGT 040104 NS9530 Turning Insert (ISO 040104) — Rhombic, 11° Clearance — Tungaloy The EPGT040104 NS9530 is an ISO‑standard rhombic turning insert for external and internal turning, designed as a finishing grade for steels and optimised for continuous cuts and small depths of cut. Cermet finishing grade NS9530 Rhombic ISO 04 format, 11° clearance 0.4 mm corner radius for fine finishes Cylindrical hole with single‑side countersink Precision finishing with low cutting forces The uncoated cermet grade NS9530 is engineered for finishing operations where surface quality and repeatable geometry matter. As a ceramic‑metal composite, cermet offers a sharp cutting edge and reduced adhesion to workpiece material, which results in lower cutting forces and diminished burr formation. For manufacturers performing continuous turning with small depths of cut, this grade helps to minimise rework and achieve consistent dimensional accuracy. The fine 0.4 mm corner radius supports delicate profiles and smooth transitions without compromising edge stability. Seamless integration into ISO tool systems Compatibility depends on several geometric and mechanical parameters; the insert conforms to the ISO 040104 designation and a rhombic plate shape, ensuring interchangeability with suitably rated holders. Key features such as 11° clearance, a thickness of 1.59 mm and the cylindrical hole with single‑side countersink (40°–60°) permit secure clamping and correct seating in both external holders and boring bars. When combined with the correct shim and clamping set, the system achieves reliable repeatability and avoids chatter that would otherwise degrade surface finish. Productivity benefits and practical considerations Selecting a finishing grade such as NS9530 reduces cutting forces and heat generation, which in turn prolongs tool life under light cutting conditions and reduces spindle load. The single‑side chipbreaker is tailored for continuous chips and helps to control evacuation at modest feeds; this supports safer, more predictable machining sequences. Practical assembly comprises the insert, a matched external holder or boring bar, the appropriate underlay/clamp set and replacement screws — a modular approach that simplifies maintenance and reduces downtime. For expert selection and immediate supply of the Tungaloy NS9530 finishing insert, contact Metav Werkzeuge for application advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6998035 SKU (vendor): 6998035-Tungaloy Manufacturer SKU: TUN6998035 Designation: EPGT040104 NS9530 Model series: ISO turning inserts Material: carbide Manufacturer: Tungaloy Core data ISO size: 040104 Corner radius: 0.4 mm Clearance angle: 11° Insert angle: 75° Thickness: 1.59 mm Plate format: 04 Countersink angle: 40°–60° Special features Grade NS9530 — uncoated cermet finishing grade Rhombic plate shape Single‑side chipbreaker Cylindrical hole with single‑side countersink Suitable for external and internal turning Optimised for continuous cuts and small depths of cut FAQ What materials is this insert designed for? The NS9530 finishing grade is specifically developed for machining steel; the EPGT 040104 insert from Tungaloy gives excellent surface quality when used in continuous turning of steel components. Can the insert be used for both external and internal turning? Yes, the rhombic ISO 040104 format and the 11° clearance make the insert suitable for both external turning and internal boring when paired with the appropriate holder. How does the uncoated cermet grade affect tool life? The uncoated cermet composition of the NS9530 insert promotes a sharp cutting edge and reduced adhesion, which helps maintain a stable edge for finishing tasks and can extend useful life under light cutting conditions. What should be considered when selecting the holder? Compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness; ensure the holder matches the ISO 040104 geometry and secures the insert with the correct shim and clamp set. Is the insert suitable for interrupted cuts? The NS9530 finishing grade is optimised for continuous cuts and small depths of cut; for heavily interrupted machining, a different grade or edge preparation is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040104 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of a tough, edge‑stable carbide grade SH7025 and a rhombic 75° geometry for reliable turning performance; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. EPGT 040104 SH7025 turning insert (ISO 040104) by Tungaloy — rhombic 75°, with hole The EPGT 040104 SH7025 is an ISO‑standard rhombic turning insert designed for external and internal turning, offering stable chip control and consistent edge performance for small tools and variable engagement conditions. Coated carbide grade SH7025 Rhombic insert, 75° included angle Single-sided chipbreaker for stable chips Cylindrical hole with 40°–60° countersink Increase process reliability with a tough, edge-stable grade The combination of coated carbide construction and the SH7025 grade delivers a balance of toughness and wear resistance that reduces unexpected edge chipping during interrupted cuts or variable engagement. By using a rhombic 75° geometry the insert provides a favourable approach angle that supports stable cutting forces and a consistent surface finish. The corner radius 0.4 mm contributes to predictable tool life and repeatable results when tools are changed, helping to reduce setup variance and minimise unplanned downtime. Simple integration into ISO tool systems for fast changeover Designed to ISO dimensions, the insert fits standard clamping systems where compatibility is defined by form, relief angle, tolerance class, fixation, size and thickness. The cylindrical hole with single‑side countersink (40°–60°) ensures secure seating and repeatable orientation in a matched holder, while the 1.59 mm thickness and rhombic 04 size permit compact toolholder designs. Clear system assembly—insert, matching external holder or boring bar, shim/clamp set and replacement screws—means quick changeovers and minimal machine downtime. Reliable chip control and versatility for mixed tasks The single-sided chipbreaker is optimised for turning applications and supports controlled chip formation across a range of engagement conditions. The SH7025 grade is formulated to remain edge‑stable under varying loads, which is particularly advantageous for smaller cutting tools or operations with fluctuating depth of cut. These characteristics translate into fewer interruptions, improved surface integrity and a lower total cost per component in short‑run and mixed‑batch production scenarios. For technical application assistance or to purchase genuine Tungaloy SH7025 inserts from Metav Werkzeuge, please contact our team at info@metav-werkzeuge.com or call +49 2822 7131930 — we will be happy to advise on tool holder compatibility and optimisation. Technical data Article number: 6967510 SKU: 6967510-Tungaloy Manufacturer SKU: TUN6967510 Model series: ISO-Drehwendeschneidplatten Material: carbide Facts ISO designation: 040104 Thickness: 1.59 mm Corner radius: 0.4 mm Included angle: 75° Relief angle: 11° Plate size: 04 Hole: with hole Special features Grade/coating: SH7025 Coated carbide cutting material Single-sided chipbreaker Rhombic plate form Cylindrical hole + single-side countersink (40°–60°) Intended application: turning Designed for small tools and varying engagement conditions FAQ What are the primary applications for this insert? The EPGT 040104 SH7025 Tungaloy turning insert is intended for external and internal turning where a rhombic 75° geometry and a single‑sided chipbreaker provide stable chip control. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fixation, size and thickness; the insert adheres to ISO 040104 dimensions for use in corresponding holders and boring bars. How does the SH7025 grade affect performance? The SH7025 grade offers tough, edge‑stable performance, reducing chipping risk under variable engagement and improving reliability for small‑tool applications. What is the significance of the cylindrical hole and countersink? The cylindrical hole with a single‑side countersink (40°–60°) ensures secure seating and repeatable orientation in the clamping system, aiding quick changeover and consistent cutting geometry. Can this insert be used for interrupted cuts? Yes, the coated carbide construction and SH7025 grade are suitable for operations with varying engagement, offering resistance to edge chipping during interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040104 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide SH7025 grade, a compact rhombic 04 form with 11° clearance and a 0.4 mm corner radius for reliable edge stability and predictable chip control; order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific advice. EPGT040104 SH7025 indexable turning insert — rhombic 04, 11° clearance (Tungaloy) The EPGT040104 SH7025 is an ISO‑format indexable turning insert designed for external and internal turning operations, offering a tough, edge‑stable coated carbide grade for variable engagement conditions. ISO rhombic 04 form, 11° clearance SH7025 coated carbide, edge‑stable grade Single‑sided chipbreaker, hole with countersink Compatible with standard ISO turning holders Stable cutting edges for mixed and intermittent turning The coated carbide SH7025 grade delivers a balance between toughness and wear resistance, making it suitable where engagement conditions change or where smaller tools are used. The combination of a 0.4 mm corner radius and a robust coating supports consistent edge life and reduces the risk of chipping during interrupted cuts. This results in fewer insert changes and steadier process outputs, which is particularly relevant for batch production and jobs with variable cut depths. Predictable fit and simple retrofitting to existing holders Made to the ISO series specification, the insert’s rhombic 04 form and defined geometry ensure reproducible seating in compatible toolholders. Holder compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so selecting a holder that matches these parameters guarantees correct clamping and stable cutting. The central cylindrical hole with a one‑sided countersink (40°–60°) simplifies secure fastening and repeatable indexing of the cutting edge. Controlled chip formation for cleaner surfaces The one‑sided chipbreaker design encourages orderly chip control in typical turning applications, improving evacuation and reducing the chance of built‑up edge. Combined with the insert’s 1.59 mm thickness, the geometry supports adequate rigidity for finish and semi‑finish turning, delivering improved surface integrity and dimensional consistency with fewer reworks. Practical geometry for versatile turning tasks The 11° clearance angle and the insert’s overall geometry permit flexible use on both external and internal turning operations. The compact 04 size is advantageous where access is limited or where multiple indexed corners are required from a single insert. As a purpose‑designed ISO insert, it integrates into standard tooling systems and supports efficient tool management through straightforward rotation and replacement. Contact Metav Werkzeuge for tailored application recommendations on Tungaloy SH7025 inserts and to check compatibility with existing toolholders; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 7743504 Manufacturer SKU: TUN7743504 SKU: 7743504-Tungaloy Model series: ISO turning inserts Material: coated carbide Designation: EPGT040104 Label: EPGT040104 SH7025 Tungaloy indexable insert Manufacturer: Tungaloy Facts Thickness: 1.59 mm Corner radius: 0.4 mm Clearance angle: 11° Size: 04 Wedge/approach angle: 75° Special features Coated carbide grade SH7025 Rhombic insert form (04) Single‑sided chipbreaker Cylindrical hole with one‑sided countersink (40°–60°) ISO‑normed turning insert suitable for external and internal turning operations FAQ What turning tasks is this insert designed for? The EPGT040104 SH7025 insert is designed for both external and internal turning, offering versatility for finish and semi‑finish operations where stable edges and good chip control are required. Which materials suit the SH7025 grade? The SH7025 coated carbide is a tough, edge‑stable grade intended for a wide material range; the actual choice of chipbreaker and cutting parameters should match the workpiece material and machining conditions when using this insert. How can compatibility with existing holders be ensured? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; verifying these parameters against the holder specification ensures correct seating of the insert. Why is the 0.4 mm corner radius important? A 0.4 mm corner radius increases edge strength and contributes to improved surface finish, helping the insert withstand light shock and maintain dimensional stability during turning. Is the insert indexed and easy to replace? Yes, the ISO‑formatted geometry, central hole and countersink facilitate secure clamping and straightforward indexing, enabling efficient replacement during production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
EPGT 040104 SH7025 Wendeplatten - Tungaloy
Reliable machining performance is delivered through the combination of a coated carbide SH7025 grade, a 75° rhombic ISO form and a precise 0.4 mm corner radius; the result is stable cutting edges and consistent chip control. Order the insert directly via Metav Werkzeuge or consult the technical advisors for application recommendations. EPGT 040104 SH7025 turning insert (EPGT040104) by Tungaloy – coated carbide, ISO 040104, 75° rhombic The EPGT040104 SH7025 is an ISO-standard turning insert engineered for external and internal turning where edge stability and repeatable results are required in variable engagement conditions. Coated carbide grade SH7025 for edge stability 75° rhombic insert, ISO 040104 form 0.4 mm corner radius for precise profiles Single-sided chipbreaker, with central hole Boosted productivity through stable edge life and predictable chip control The primary benefit of the SH7025 grade is its focus on edge stability under changing cutting conditions. As a coated carbide insert, it is designed to maintain a durable cutting edge even when smaller tools or varying engagement depths are used. The single-sided chipbreaker is tailored to promote consistent chip formation, reducing interruptions and enabling more continuous cycles in turning operations. Compatibility with standard clamping systems is determined by form, relief angle, tolerance class, fixing method, size and thickness; these factors ensure the insert can be integrated into existing toolholders without compromising process reliability. Consistent component quality thanks to precise geometry and ISO standardisation The 75° rhombic geometry combined with the ISO 040104 designation provides a familiar form factor for many turning applications, supporting accurate profile generation and angular approaches. The 0.4 mm corner radius gives controlled cutting edge engagement for profile accuracy while limiting stress concentrations at the cutting tip. With a plate thickness of 1.59 mm, the insert offers a balance between rigidity and favourable cutting access in confined or fine-detail turning tasks. In practice, this geometry supports repeatable surface finishes and dimensional stability when matched to appropriate machining parameters. Practical integration and handling for workshop efficiency Integration into a turning system is straightforward: the insert sits in a matching outer holder or boring bar and is secured with the required clamp and screw set; a small central hole with a cylindrical bore plus a single-sided countersink (40°–60°) facilitates accurate seating and positive clamping. The insert series is used together with a suitable holder, underlay/clamping kit and replacement screws to form a complete cutting unit. Selection of the correct chipbreaker and grade should be based on workpiece material and process stability; where material varieties or entry conditions change frequently, the SH7025 grade is advantageous for its toughness and resistance to chipping, supporting fewer tool changes and higher uptime. For dependable turning performance with the Tungaloy SH7025 grade, contact Metav Werkzeuge for tailored application advice or to place an order via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6967506 Manufacturer SKU: TUN6967506 Model series: ISO turning inserts Designation: EPGT040104 SH7025 Tungaloy insert Facts ISO form: 040104 Insert form: rhombic, 75° Corner radius: 0.4 mm Relief (clearance) angle: 11° Plate thickness: 1.59 mm Design & special features Material: carbide Coating / grade: SH7025 (coated carbide) Chipbreaker: single-sided Hole: cylindrical bore with one-sided countersink (40°–60°) Insert size: 04 Typical application: external and internal turning FAQ What materials is this insert suitable for? The EPGT040104 SH7025 insert is a coated carbide grade engineered for a broad range of turning tasks; selection of the chipbreaker and operating parameters should be matched to the specific workpiece material for optimal results. How is the insert clamped and located in the holder? The insert features a central hole with a cylindrical bore and a single-sided countersink (40°–60°) for positive seating; it is used with a matching outer holder or boring bar together with an underlay/clamping kit and replacement screws. Can the SH7025 grade be used for interrupted cuts? The SH7025 grade offers increased toughness and edge stability, making it suitable for applications with variable engagement or moderate interruptions, particularly when smaller tools are involved. What benefits does the 0.4 mm corner radius provide? A 0.4 mm corner radius balances profile accuracy and tool strength, enabling precise profiles while reducing the likelihood of edge chipping during typical turning operations. Which ISO form does this insert conform to and why is that important? The insert is listed as ISO 040104 (EPGT040104), which ensures compatibility with holders designed for that form and simplifies tool selection and replacement across standardised tool systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040104 SH7025 Wendeplatten - Tungaloy
High edge stability from the SH7025 grade combined with a precise 0.4 mm corner radius and ISO-compliant rhombic form delivers consistent part quality and reliable tool life; compatibility with standard ISO holders simplifies integration. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored recommendations. EPGT 040104 SH7025 — ISO turning insert (rhombic, with hole) by Tungaloy The EPGT040104 SH7025 is an ISO-standard rhombic turning insert for external and internal turning, featuring a one-sided chipbreaker and a cylindrical hole with single-side countersink for secure clamping. Tough SH7025 coated carbide grade for stable edges Rhombic insert form with 11° clearance angle Central hole with cylindrical seat and 40°–60° countersink 0.4 mm corner radius for versatile engagement Longer service life through a tough, edge-stable grade The coated carbide SH7025 is engineered for edge stability and consistent wear behaviour, which is particularly beneficial in small tools or when engagement conditions vary. The composition and coating promote predictable abrasion, reducing the frequency of index changes and supporting uninterrupted production cycles. This stability translates into fewer interruptions and improved component consistency when machining both external and internal features. Geometry that improves accuracy and repeatability A rhombic plate form with a defined 11° clearance angle and a 0.4 mm corner radius delivers a balance between strength and cutting precision. The small corner radius reduces cutting forces on interrupted cuts while still providing sufficient edge support for smoother surfaces. The specified geometry helps maintain dimensional accuracy across a series of parts, making the insert suitable for repeatable turning tasks where surface finish and tolerance adherence matter. Secure mounting and straightforward system compatibility The insert incorporates a cylindrical central hole with a single-sided countersink (40°–60°) to ensure firm seating and positive clamping in ISO-compatible holders. Compatibility with toolholders depends on form, clearance angle, tolerance class, fastening, size and thickness; the 1.59 mm plate thickness and ISO designation align with common external holders and boring bars. Clear mechanical seating reduces micro-movement at the cutting edge and supports process stability. Practical advantage for workshop workflows Specified as an ISO-series turning insert, this plate integrates into established tool systems with minimal adjustment. The one-sided chipbreaker aids chip control for many turning operations, and the compact design suits small-diameter tools or constrained setups. For shops seeking dependable inserts for a variety of steels and mixed production runs, the combination of grade, geometry and mounting features yields a simple route to dependable, productive machining. For reliable turning performance with the SH7025 grade, contact Metav Werkzeuge for availability and application support; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific holders and workpiece materials Technical data Article number: 6967508 Manufacturer SKU: TUN6967508 Dealer SKU: 6967508-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Coated carbide Facts Plate thickness: 1.59 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 75° Plate size: 04 Special features Rhombic plate form One-sided chipbreaker Central hole: cylindrical seat + one-sided countersink (40°–60°) Grade: SH7025 (tough, edge-stable) Typical application: External and internal turning FAQ What holders are compatible with this insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; the EPGT 040104 SH7025 fits standard ISO rhombic holders and matching boring bars when those specifications match. Which materials can be machined with this grade? The SH7025 coated carbide grade is a tough, edge-stable choice suited to a broad range of steels and mixed-material batches; select the chipbreaker and cutting parameters according to workpiece behaviour. How does the central hole influence clamping? The cylindrical hole with a single-side countersink (40°–60°) provides positive seating and reliable clamping in ISO-compatible toolholders, reducing micro-movement at the cutting edge. Is the insert suitable for small-diameter tools and interrupted cuts? Yes; the relatively small 0.4 mm corner radius and the SH7025 grade are targeted at applications with changing engagement conditions and smaller tools, offering robustness for interrupted cuts. How is the chip control achieved? Chip control is supported by the one-sided chipbreaker; matching the breaker geometry and feed rates to the material and operation improves chip evacuation and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040104 SH725 Wendeplatten - Tungaloy
Benefit from the combination of SH725 coated carbide toughness, a precise 0.4 mm corner radius and reliable ISO compatibility for consistent turning performance. Order genuine inserts or consult Metav Werkzeuge's specialists for application matching and fast supply. EPGT 040104 SH725 — Indexable turning insert, rhombic, 75° geometry, Tungaloy The EPGT040104 SH725 is an ISO‑standard rhombic indexable insert for external and internal turning, engineered for stable cutting under variable engagement conditions and designed for use with compatible ISO holders. Coated carbide grade SH725 for durable cutting edges Rhombic 75° form for versatile external and internal turning 0.4 mm corner radius for controlled chip formation Cylindrical hole with countersink for reliable clamping High‑performance grade for variable cutting conditions The insert is manufactured from coated carbide in the SH725 grade, a formulation focused on toughness and edge stability. This makes the component particularly suitable for small tools and operations where engagement conditions change frequently. The 0.4 mm corner radius moderates cutting forces and helps to avoid premature edge chipping, while the applied coating extends tool life by improving wear resistance. For production environments seeking a balance of life and reliability, this grade supports steady cycle times and reduced tool change frequency. ISO compatibility and secure mounting for repeatable results Designed as an ISO indexable insert, the component fits typical ISO‑compliant holders when the holder’s form, clearance angle (11°), tolerance class, fixing and size match the insert specification. The rhombic plate form and 75° approach angle give flexibility for both external and internal turning tasks. The cylindrical hole with one‑sided countersink (40°–60°) ensures secure clamping and consistent seat location, which reduces assembly variability and supports repeatable geometry in serial production. Mismatched holder geometry or incorrect tolerance classes can lead to instability; therefore, correct pairing of insert and holder is essential for safe, efficient machining. Application guidance and productivity benefits This insert features a single‑sided chipbreaker and a plate thickness of 1.59 mm, enabling controlled chip formation in many cutting scenarios. Typical use cases include finishing and medium‑duty roughing in turning operations; selection of the most suitable chipbreaker and the SH725 grade should follow the workpiece material and machining strategy. The robust cutting edge behaviour contributes to fewer unscheduled stops and consistent surface quality. For complex production needs, technical drawings and compatibility checks can be provided to ensure the insert integrates cleanly into existing tool systems. For precision matching of tooling and to source original Tungaloy EPGT 040104 SH725 indexable inserts, contact Metav Werkzeuge’s technical team via info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and reliable supply Technical data Article number: 6737293 SKU: 6737293-Tungaloy Manufacturer SKU: TUN6737293 Model series: ISO turning indexable insert series Designation: EPGT040104 Material: carbide (cemented carbide) Grade: SH725 Facts Corner radius: 0.4 mm Clearance angle: 11° Insert angle: 75° Thickness: 1.59 mm Size: 04 Plate form: rhombic Hole: with cylindrical hole and one‑sided countersink (40°–60°) Special features Coated carbide grade SH725 Single‑sided chipbreaker Intended use: external and internal turning Compatibility determined by holder form, relief angle, tolerance class, fixing, size and thickness System build: ISO insert, matching external holder or boring bar, support/clamping set and replacement screws FAQ What is the primary application for this insert? The EPGT 040104 SH725 insert is intended for turning operations, suitable for both external and internal turning where a rhombic, 75° geometry is beneficial. Which workpiece materials are appropriate for this grade? The SH725 grade provides tough, edge‑stable performance; the insert can be used across a broad range of materials but the chipbreaker and specific cutting data should be selected according to the workpiece material and machining type. How is the insert clamped in the toolholder? Clamping is achieved via the cylindrical hole with a one‑sided countersink (40°–60°); secure and repeatable seating requires a matching ISO‑compliant holder and correct tolerance class. What effect does the 0.4 mm corner radius have? A 0.4 mm corner radius reduces local stress on the cutting edge, improves edge strength and contributes to controlled chip formation and surface finish in finishing and medium‑cutting operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
EPGT 040104 SH725 Wendeplatten - Tungaloy
Take advantage of a coated carbide grade that combines tough cutting edges with ISO interchangeability for consistent turning performance; the 75° geometry and 0.4 mm corner radius deliver reliable edge strength and surface finish. Order the insert via Metav Werkzeuge or consult our specialists for selection advice. EPGT 040104 SH725 Tungaloy turning insert – rhombic 75° geometry, coated carbide EPGT040104 SH725 Tungaloy is an ISO‑normed indexable insert designed for turning operations, offering a tough, edge‑stable grade suitable for variable engagement and smaller tooling systems ISO‑normed turning insert SH725 Coated carbide for stable cutting edge Rhombic 04 format, 75° approach angle Single‑sided chipbreaker, secure hole style 0.4 mm corner radius for durability Increased productivity through a tough, coated carbide grade The coated carbide SH725 offers a balance between toughness and wear resistance that supports longer tool life and fewer interruptions in machining cycles. As an ISO‑normed turning insert, its design is optimised for external and internal turning where changing engagement conditions occur. The rhombic 04 outline combined with a 75° geometry helps to distribute cutting forces evenly, reducing risk of chipping on small tools while maintaining a consistent surface finish. This makes the insert particularly apt for applications requiring repeatable dimensional accuracy and economical tool usage. Predictable compatibility and straightforward holder selection The insert follows ISO conventions, so compatibility with a suitable holder depends on form, relief angle, tolerance class, fastening, size and thickness rather than brand name alone. Key dimensions such as 1.59 mm thickness, 11° relief angle and 0.4 mm corner radius define how the part seats and performs; these measurable values help to select matching carriers and clamping systems reliably. The presence of a cylindrical hole with a one‑side countersink (40°–60°) provides secure seating and repeatable positional accuracy, reducing setup variance and streamlining tool changeovers. Controlled chip formation and robust mounting for stable turning A single‑sided chipbreaker in combination with the SH725 cutting grade delivers consistent chip control when the chipbreaker, grade and insert geometry are matched to workpiece material and process stability. The insert’s coated carbide substrate is intended to resist edge deformation under variable conditions, making it suitable for a broad range of turning tasks. Together, the secure hole style and ISO geometry reduce the likelihood of loosening or misalignment, supporting uninterrupted production runs and reproducible part quality. For expert advice on selecting the right Tungaloy SH725 insert for specific turning tasks or to order original EPGT 040104 SH725 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application‑oriented support. Technical data Article number: 6737212 Manufacturer SKU: TUN6737212 SKU: 6737212-Tungaloy Model series: ISO‑Drehwendeschneidplatten Core data Insert designation: EPGT040104 Size: 04 Thickness: 1.59 mm Relief angle: 11° Approach angle: 75° Corner radius: 0.4 mm Special features Coated carbide grade SH725 Rhombic insert shape (04) Single‑sided chipbreaker Cylindrical hole with one‑side countersink (40°–60°) ISO‑normed turning insert Suitable for external and internal turning Compatibility determined by form, relief, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? The SH725 grade is a coated carbide designed for a broad range of turning tasks; material suitability should be selected by matching the grade and chipbreaker to the workpiece and machining strategy. Is the insert compatible with standard ISO holders? Yes, the insert is ISO‑normed; compatibility with a holder depends on matching form, relief angle, tolerance class, fastening, size and thickness rather than brand alone. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius offers a compromise between edge strength and surface finish, improving resistance to chipping while maintaining acceptable machining accuracy for many turning operations. Can this insert be used for internal turning as well as external turning? The geometry and chipbreaker permit use in both external and internal turning; selection of an appropriate holder and stable setup is essential for optimal results. What does the hole style mean for clamping reliability? The cylindrical hole with a single‑side countersink (40°–60°) provides secure seating and repeatable positional accuracy, reducing the risk of movement during machining. Which specific product identifiers should be used when ordering? Order using the designation EPGT040104 SH725 and manufacturer article number 6737212 or manufacturer SKU TUN6737212 for clarity. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
EPGT 040104 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide reliability, a precise 0.4 mm corner radius, and ISO compatibility for efficient turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. EPGT040104 SH725 ISO turning insert by Tungaloy — rhombic 04, 11° relief EPGT040104 SH725 is an ISO‑standard turning insert engineered for external and internal turning with a single‑sided chipbreaker and a cylindrical locating hole ISO rhombic insert EPGT040104 in grade SH725 Coated carbide for stable cutting edge Single-sided chipbreaker for controlled chips 11° relief angle, 0.4 mm corner radius Increased process stability for routine turning The coated‑carbide composition and the SH725 grade deliver a balance between toughness and wear resistance that benefits repeatable turning tasks. With a rhombic 04 footprint and 0.4 mm corner radius, the insert offers predictable engagement and a consistent cutting line, reducing vibration and minimising unexpected tool changes. The result is a more dependable cycle time and reduced scrap rate when machining components where dimensional consistency matters. Clear mounting and compatibility reduce setup time Compatibility with a toolholder is defined by form, relief angle, tolerance class, fastening, size and thickness, so the insert integrates into standard ISO turn‑tool systems with no surprises. The cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping and accurate seating in compatible holders. This predictable interface shortens setup, improves repeatability and simplifies inventory management for workshop toolrooms. Controlled chip formation for safer turning The single‑sided chipbreaker is designed to direct and fragment chips for stable evacuation during both external and internal turning. Combined with the coated substrate, this geometry supports continuous cutting under varying engagement conditions, particularly useful on smaller tools or when cutting parameters fluctuate. The engineered chip control assists coolant flow and contributes to safer machining cycles and cleaner lathe environments. Practical advice on materials and applications Intended primarily for turning, the insert is suited where a tough, edge‑stable grade is needed — especially when smaller inserts or variable cut depths are used. The combination of coating and grade makes this insert appropriate for a wide range of steels and alloyed materials; selection of the chipbreaker and grade should match the workpiece material and machining stability. Where roughing and finishing alternate on short runs, this insert offers the resilience and edge security to maintain surface quality. For reliable turning performance with Tungaloy's SH725 grade, contact Metav Werkzeuge for ordering and tailored technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737283 Manufacturer SKU: TUN6737283 Series: ISO‑Drehwendeschneidplatten ISO designation: EPGT040104 Facts Shape size: 04 Plate thickness: 1.59 mm Relief angle: 11° Included corner radius: 0.4 mm Included angle: 75° Special features Material: coated carbide Grade: SH725 Plate form: rhombic Chipbreaker: single‑sided Hole: with hole — cylindrical hole + one‑side countersink (40°–60°) FAQ What materials is this insert suitable for? The EPGT040104 SH725 insert is designed for turning and performs well on a wide range of steels and alloyed materials due to its coated carbide composition and the SH725 grade. How is the insert mounted in a holder? Mounting relies on the insert form, relief angle and the cylindrical locating hole with a one‑side countersink; the EPGT040104 seats accurately in compatible ISO toolholders to ensure secure clamping. What advantages does the single-sided chipbreaker provide? The single‑sided chipbreaker promotes controlled chip formation and evacuation, improving machining safety and surface finish in both external and internal turning operations. Can this insert be used for finishing passes? Yes; the combination of a stable cutting edge and the 0.4 mm corner radius supports finishing where good surface quality and dimensional control are required. Which product code should be quoted when ordering? Please reference SKU 6737283‑Tungaloy or article number 6737283 when ordering the EPGT040104 SH725 Tungaloy turning insert. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
EPGT 040104 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of an ISO-standard rhombic geometry, a coated carbide grade SH725 and a compact 0.4 mm corner radius for consistent results in general turning applications; order the insert directly via Metav Werkzeuge or ask the consultants for assistance. EPGT 040104 SH725 turning insert — Tungaloy, coated carbide, rhombic 04, with hole EPGT 040104 SH725 is a compact ISO-standard turning insert designed for external and internal turning, offering a tough, edge-stable grade for varied engagement conditions ISO‑compliant rhombic insert 04 size Coated carbide grade SH725 One-sided chipbreaker for stable chips Cylindrical hole with countersink 40°–60° Consistent cutting performance for mixed turning tasks The EPGT040104 insert combines a coated carbide substrate with the SH725 grade to deliver a stable cutting edge under intermittent or varying cutting conditions. Its design supports both external and internal turning operations and is particularly suited to smaller tool assemblies where engagement depth changes. The coated surface improves wear resistance, while the robust grade reduces chipping risk during interrupted cuts, helping maintain dimensional accuracy and predictable process windows. Simple integration into ISO tool systems Compatibility is determined by form, relief, tolerance class, fastening, size and thickness; the rhombic 04 size and 75° included angle ensure compatibility with common ISO holders. The insert features a cylindrical hole with a single‑sided countersink (40°–60°) for secure clamping and repeatable seating. The 11° relief and 1.59 mm plate thickness make the insert suitable for compact toolholders, while the 0.4 mm corner radius balances strength and finishing capability. These attributes simplify holder selection and reduce set-up time. Better chip control and longer productive runs A one‑sided chipbreaker gives controlled chip formation for a range of materials and cutting modes; this chip control reduces the need for frequent interventions and supports steady cycle times. The combination of geometry and the SH725 cutting grade contributes to extended tool life, particularly when machining with small‑scale tooling or when stability varies. Selecting the appropriate chipbreaker and matching the insert grade to the workpiece material supports efficient material removal and a reliable surface finish. Contact Metav Werkzeuge for tailored recommendations on Tungaloy turning inserts and compatibility checks with existing holders — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6737284 Manufacturer SKU: TUN6737284 SKU: 6737284-Tungaloy Facts Corner radius: 0.4 mm Relief angle: 11° Included angle: 75° Plate thickness: 1.59 mm Plate size: 04 Special features Coated carbide (hardmetal) material Cutting grade: SH725 Rhombic plate geometry Cylindrical hole + one-sided countersink (40°–60°) One-sided chipbreaker ISO‑standard turning insert series Application: external and internal turning FAQ What holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening and size; the rhombic 04 format and the 75° included angle of the insert align with common ISO turning holders designed for EPGT‑style plates. Which materials suit the SH725 grade? The SH725 coated grade is formulated for tough, edge‑stable performance and is suitable where varying engagement or smaller tools are used; it performs well across a broad range of engineering materials when the chipbreaker and cutting data are matched. How does the chipbreaker affect machining? The one‑sided chipbreaker provides predictable chip formation and evacuation, improving machining stability and reducing the risk of chip entanglement in both external and internal turning operations. Is the insert repeatable after re‑clamping? The cylindrical hole and single‑side countersink ensure consistent seating and repeatability when re‑clamped in an appropriate ISO‑compatible holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040104 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of robust coated carbide, precise geometry and ISO interchangeability for reliable turning performance; order the insert via Metav Werkzeuge or consult our technical team for application-specific advice. EPGT 040104 SH730 rhombic ISO turning insert, 11° clearance – Tungaloy A EPGT040104 SH730 turning insert designed for external and internal turning, offering a tough coated carbide grade for stable cutting under variable engagement conditions. Coated carbide SH730 for stable cutting Rhombic 04 insert for versatile turning 0.4 mm corner radius for fine profiling Cylindrical hole with single-sided countersink High efficiency and stable edge life for turning operations The combination of the SH730 grade and a protective coating delivers a balance of toughness and edge stability that supports productive turning cycles. Designed for scenarios with varying immersion and intermittent cuts, this coated carbide insert reduces the risk of premature chipping and enables longer runs between index changes. The result is improved machine uptime and consistent component quality, which supports lean production goals and predictable process outputs. Geometry engineered for repeatable dimensional accuracy The rhombic plate form in size 04, paired with a 0.4 mm corner radius and an 11° clearance angle, provides controlled cutting engagement and fine-profile capability. The modest radius helps to achieve precise corner definitions without increasing cutting forces excessively. Plate thickness 1.59 mm and the secure central fixation ensure rigid clamping, reducing vibration and enhancing repeatability. Where tight tolerances are required, the geometry supports stable tool paths and consistent surface finishes. System compatibility and secure clamping for hassle-free integration As an ISO-standard turning insert, compatibility with holders is determined by form, clearance, tolerance class, fastening method, size and thickness. The design includes a cylindrical hole with a single-sided countersink (40°–60°) for reliable seating and clamping torque distribution. Integration into an established tool system requires matching the holder to the insert form and clamping style; this enables straightforward replacement and minimal setup time in production environments. Practical use and application guidance The insert is tailored for general turning duties, suitable for both external and internal operations where a durable, edge-stable grade is required. Selection of the correct chipbreaker and grade should follow the workpiece material and machining strategy: the SH730 grade is particularly effective when cutting conditions vary or when smaller tooling dimensions demand resilient edge behaviour. For complex applications, pairing the insert with an appropriate holder and clamp set ensures optimal chip formation and surface quality. Discuss application requirements for Tungaloy EPGT040104 SH730 inserts with Metav Werkzeuge; technical advisors are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6862172 Manufacturer SKU: TUN6862172 Product name: EPGT040104 SH730 Tungaloy turning insert Material: Hartmetall Facts Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 1.59 mm Plate size: 04 Geometry angle: 75° Hole: with hole Special features Coating / grade: SH730 Plate form: rhombic Chipbreaker: one-sided ISO-standard turning insert Hole style: cylindrical hole + single-sided countersink (40°–60°) FAQ What applications suit this turning insert best? This insert is intended for external and internal turning; the SH730 grade is chosen for stable cutting under varying engagement conditions. How is the EPGT040104 compatible with existing holders? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; matching those parameters ensures correct seating and clamping. What does the SH730 grade offer compared with standard grades? The SH730 grade provides enhanced toughness and edge stability, which helps maintain performance in smaller tools or when cutting conditions change frequently. Can the insert achieve fine corner radii and good surface finish? Yes, the 0.4 mm corner radius and precise geometry support fine profiling and consistent surface quality when paired with suitable holders. What clamping arrangement is required for secure mounting? The insert uses a cylindrical hole with a single-sided countersink (40°–60°); a compatible clamp set and correct fastening torque ensure secure mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040104 SH730 Wendeplatten - Tungaloy
Combining the SH730 coated carbide grade with the ISO-compliant EPGT040104 geometry delivers stable cutting-edge performance and wide material coverage for turning applications; order the insert directly via Metav Werkzeuge or consult our specialists for application matching. EPGT 040104 SH730 EPGT ISO turning insert, rhombic 04 — Tungaloy The EPGT040104 SH730 indexable insert is a rhombic 04 turning grade designed for external and internal turning with an 11° clearance and a 0.4 mm corner radius. Coated carbide grade SH730 Rhombic 04 geometry for versatile turning 11° clearance for stable cutting action Central hole with cylindrical countersink Consistent cutting performance under variable conditions The combination of the SH730 coating and a coated carbide substrate is engineered for reliable, edge-stable performance in turning operations. The grade provides improved toughness for fluctuating engagement and smaller tooling setups, reducing the risk of edge chipping. With a 0.4 mm corner radius the insert balances strength and surface finish, enabling predictable tool life and fewer interruptions in production. This leads to more economical machining and a lower overall cost per component. Fast, standardised mounting for process reliability Compatibility with holder systems is defined by geometry, 11° clearance, tolerance class, fastening and plate thickness, which simplifies tool selection and reduces setup time. The rhombic 04 format and central hole with a cylindrical countersink (40°–60°) ensure secure clamping and repeatable positioning in standard ISO holders. As a result, cycle-to-cycle variation is minimised and setup becomes a measurable contributor to process stability rather than a source of scrap. Broad material coverage and grade advantages The SH730 grade is intended for tough conditions where cutting-edge stability is required; it is particularly suitable when workpiece materials and cutting forces vary. The coated compound helps manage heat and wear, extending the effective tool life compared with uncoated grades. Selecting this insert supports consistent surface quality during both roughing and finishing passes while offering flexibility across a wide range of steels and alloyed materials. Practical details that aid inspection and tool management Key dimensions and form factors make the insert straightforward to inventory and inspect: ISO designation, 1.59 mm thickness, rhombic plate form and clear marking of the 040104 geometry speed up identification on the shop floor. The single-sided chipbreaker assists in predictable chip formation and evacuation in typical turning operations. Clear, verifiable specifications facilitate tool management, help planners compare alternatives quantitatively and support maintenance of machining standards. For reliable, high-productivity turning with Tungaloy SH730 inserts, contact Metav Werkzeuge to discuss application matching and availability at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6837556 SKU: 6837556-Tungaloy Manufacturer SKU: TUN6837556 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Data Corner radius: 0.4 mm Clearance angle: 11° Cutting edge angle: 75° Thickness: 1.59 mm Size: 04 Plate form: rhombic Special features Grade: SH730 Coated carbide Single-sided chipbreaker Central hole with cylindrical countersink (40°–60°) Application: Turning (external and internal) Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What is the primary application for this insert? The insert is intended for turning (external and internal); the EPGT040104 SH730 insert from Tungaloy is optimised for situations requiring edge stability under variable engagement. Which holders are compatible with this geometry? Compatibility depends on ISO holder form, clearance angle, tolerance class, fastening and thickness; the rhombic 04 shape and the central hole with countersink make the insert compatible with standard ISO turning holders. How does the SH730 grade affect machining performance? SH730 offers a tough, edge-stable coated carbide solution that improves resistance to chipping and supports predictable tool life across a range of steels and alloyed materials. What chip control does the insert provide? The insert features a single-sided chipbreaker that promotes controlled chip formation and efficient evacuation in typical turning operations. How is the insert identified for stock and reorder? Identification is by ISO designation and article numbers: look for EPGT040104 SH730, article number 6837556 and manufacturer SKU TUN6837556 for precise reordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com