FNMG 110408 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide performance, a 0.8 mm corner radius for reliable surface finish, and an ISO‑standard form that simplifies holder compatibility; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. FNMG110408 AH8015 indexable turning insert by Tungaloy — PVD‑coated carbide, 0.8 mm radius The FNMG110408 AH8015 is an ISO‑standard indexable insert designed for external and internal turning, optimised for heat‑resistant alloys and general purpose machining where a balance of wear resistance and cutting edge stability is required. ISO FNMG 110408 form, rhombic 50° angle PVD-coated carbide grade AH8015 0.8 mm corner radius for consistent finish Double-sided chipbreaker with cylindrical hole Higher productivity through balanced grade and coating The AH8015 grade is a PVD‑coated carbide developed as a first choice for the general machining of heat‑resistant alloys, offering an even compromise between wear resistance and edge stability. This balance reduces unscheduled tool changes and contributes to steadier cycle times on both CNC lathes and turn‑mill centres. The coating increases resistance to high cutting temperatures, which is particularly beneficial when processing alloys that tend to work‑harden; as a result, the insert supports higher productivity without sacrificing surface quality. Secure clamping and ISO compatibility for reliable set‑ups Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening method, size and thickness — all of which are standardised in this ISO series. The rhombic 50° geometry and a cylindrical hole provide repeatable seating in matched holders and allow straightforward replacement during production. Together with the appropriate pad or clamping set and replacement screws, the system structure ensures consistent positioning and stiffness, reducing vibration and improving repeatability in serial production runs. Practical benefits of the geometry and chip control A 0.8 mm corner radius provides a practical compromise between edge strength and achievable surface finish: it withstands interrupted cuts better than a finer radius while still allowing good part finish at normal feeds. The double‑sided chipbreaker facilitates controlled chip formation across a range of cutting conditions, helping to avoid long, entangling chips and to maintain steady evacuation in both through‑spindle and external setups. Choose the chipbreaker and grade according to workpiece material, machining operation and component rigidity for optimal results. Guidance for application and process optimisation This indexable insert is primarily intended for turning operations, including both external and internal work. For best results, match the insert’s grade and chipbreaker to the machining task: AH8015 is suitable for heat‑resistant alloys and general steels when moderate to high thermal loads are expected. Check holder compatibility by verifying the insert form, 0° clearance, tolerance class, fastening style, size (11) and thickness (4.76 mm). For specific feed and speed recommendations or when machining exotic materials, consult product documentation or Metav Werkzeuge’s technical advisors. Contact Metav Werkzeuge to confirm holder compatibility, check stock availability or request tailored cutting data for the FNMG110408 AH8015 indexable insert — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6799673 Manufacturer SKU: TUN6799673 SKU: 6799673-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: FNMG110408 AH8015 Material: carbide Numbers / core technical data Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 11 Diamond angle: 50° Clearance angle: 0° Designs / special features Grade/coating: AH8015, PVD-coated carbide Plate form: rhombic Chipbreaker: double-sided Hole style: cylindrical hole / with hole Application: turning (external and internal) FAQ What materials is this insert suited for? The FNMG110408 AH8015 indexable insert is specified as a first‑choice grade for machining heat‑resistant alloys and is also suitable for general‑purpose turning where a balanced wear resistance and edge stability are required. Is the insert reversible and how is chip control achieved? The plate features a double‑sided chipbreaker, allowing use of both sides after indexing; chip control is achieved by the matched chipbreaker geometry and the rhombic 50° form. How can compatibility with holders be verified? Compatibility is ensured when holder form, clearance angle, tolerance class, fastening type, size and thickness match the ISO specification; Metav Werkzeuge can confirm compatibility based on the FNMG110408 designation and holder data. What surface finish and strength can be expected from the 0.8 mm radius? A 0.8 mm corner radius provides a compromise between surface finish and edge robustness — delivering improved finish over larger radii while maintaining superior resistance to edge chipping during interrupted cuts. Where can cutting data and application advice be obtained? Technical recommendations and cutting parameters for the FNMG110408 AH8015 can be requested from Metav Werkzeuge’s advisors; provide the article number or SKU for a tailored response. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110408 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T6215 and the ISO FNMG format for consistent performance in turning; the double-sided chipbreaker and rhombic form ensure secure clamping and efficient chip control. Order the FNMG110408 T6215 insert directly via Metav Werkzeuge or consult the Metav team for holder compatibility and application advice. FNMG 110408 T6215 Turning insert (CVD-coated carbide) by Tungaloy The FNMG110408 T6215 is an ISO indexable turning insert designed for external and internal turning, optimised for machining rostfreier Stahl under stable to slightly interrupted cutting conditions. ISO FNMG format for global holders CVD-coated carbide T6215 Optimised for rostfreier Stahl turning Double-sided chipbreaker, rhombic shape Reliable fit and predictable changeover for production lines The FNMG-format indexable insert follows ISO geometry so compatibility with a wide range of standard holders is achieved by matching form, clearance and fastening. The rhombic outline and central bore support secure clamping, reducing the risk of micro-movements that cause poor surface finish. For production environments this translates into predictable tool changes, lowered machine downtime and less rework, which supports steady cycle times and reproducible part quality. Extended edge life through CVD coating and carbide substrate The CVD-coated carbide composition of the grade T6215 provides enhanced wear resistance and a stable cutting edge under the thermal and adhesive challenges of rostfreier Stahl. Chemical vapour deposition produces a hard outer layer that improves abrasion resistance while the carbide substrate maintains toughness. The result is longer in-process life and consistent tool performance, which reduces insert consumption and contributes to overall cost efficiency. Controlled chip formation and process stability The double-sided chipbreaker has been designed to produce short, manageable chips in both external and internal turning. On rostfreier Stahl, where workhardening and built-up edge can occur, the chip control geometry helps to maintain stable cutting forces and a uniform surface finish. With the insert’s geometry and the 0° clearance specification, the cutting action is suitable for steady cuts and light interruptions, giving reliable results with fewer process adjustments. Practical inventory benefits and easy integration As a double-sided, indexable solution the insert offers two usable edges per side, effectively extending service life before disposal. The combination of ISO standard format, cylindrical bore and rhombic profile simplifies holder selection and inventory management, enabling versatile use across multiple turning tasks. For workshop procurement this lowers complexity and increases adaptability without sacrificing cutting performance. Contact Metav Werkzeuge for holder matching, order genuine Tungaloy FNMG110408 T6215 inserts and secure fast delivery with expert application support. Technical data Article number: 6945203 Manufacturer SKU: TUN6945203 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Product name: FNMG110408 T6215 Tungaloy insert Facts Corner radius: 0.8 mm Size: 11 mm Thickness: 4.76 mm Included angle: 50° Clearance angle: 0° Special features Shape: rhombic Coating: CVD-coated carbide (T6215) Chipbreaker: double-sided Hole style: cylindrical hole Application: turning; suitable for rostfreier Stahl; ISO compatibility FAQ What applications are suitable for this insert? The FNMG110408 T6215 insert is suitable for external and internal turning and is optimised for rostfreier Stahl under stable to slightly interrupted conditions. How does the T6215 coating affect performance? The CVD-coated carbide of grade T6215 improves abrasion resistance and edge stability, extending tool life during rostfreier Stahl machining. Is this insert compatible with standard FNMG holders? Yes, the ISO FNMG format and cylindrical bore ensure compatibility with holders that accept FNMG inserts when form, clearance and fastening match. How many cutting edges are available per insert? This double-sided indexable insert provides multiple usable edges; each side can be indexed to present a fresh cutting corner. What is the manufacturer part number and SKU for ordering? Manufacturer article number: 6945203; Manufacturer SKU: TUN6945203; available as FNMG110408 T6215 Tungaloy insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110408 T6215 Wendeplatten - Tungaloy
High wear resistance and consistent edge life combine with a stable chipformer and ISO compatibility to deliver productive turning of stainless steels; order the insert directly via Metav Werkzeuge or consult our technical team for selection and supply. FNMG 110408 T6215 — FNMG turning insert for stable to slightly interrupted turning, Tungaloy The FNMG110408 T6215 is an ISO-indexable turning insert engineered for reliable performance in the machining of stainless steels, suitable for both external and internal turning operations. CVD-coated carbide grade T6215 Designed for machining stainless steels Rhombic insert, 50° cutting angle, 0° rake Double-sided chipbreaker, cylindrical hole, R0.8 Durable grade for demanding stainless-steel turning The CVD-coated T6215 grade provides wear-resistant performance for stainless-steel machining under stable to mildly interrupted conditions. With a focus on long tool life and consistent cutting behaviour, this grade reduces the frequency of tool changes and supports continuous production runs. The coating improves resistance to abrasive and adhesive wear, which helps maintain a steady surface finish and predictable tool-life behaviour in stainless alloys. Geometry and compatibility that simplify tooling choices The rhombic FNMG geometry offers a compact cutting angle of 50° and an 0.8 mm corner radius, delivering a balance between strength and edge definition. The 0° rake angle and double-sided chipbreaker are chosen to stabilise chip flow and reduce built-up edge when turning difficult-to-machine stainless grades. Compatibility with the toolholder is determined by insert form, clearance angle, tolerance class, fixing method and thickness; the insert requires a matched toolholder, shim and clamp set compatible with the ISO FNMG110408 form. Productivity and process reliability for workshop use Integrating this indexable plate into an optimised tool system cuts setup time and increases productivity through repeatable seating and clamping. The cylindrical hole allows positive locating and secure fastening, while the double-edged format permits cost-effective index changes. For shops aiming to reduce downtime, choosing the appropriate chipbreaker and the T6215 grade for stainless steels minimises edge degradation and supports consistent dimensional accuracy. The insert’s design therefore contributes to efficient material removal rates and predictable surface quality in daily turning tasks. Contact Metav Werkzeuge for application advice on the FNMG 110408 T6215 insert and rapid supply via our technical sales team at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6945200 Manufacturer SKU: TUN6945200 SKU: 6945200-Tungaloy Series: ISO turning indexable inserts Manufacturer: Tungaloy Core data Grade: T6215 Corner radius: 0.8 mm Plate thickness: 4.76 mm Inscribed circle / size: 11 mm Cutting angle: 50° Rake angle: 0° Design & features Rhombic insert form (FNMG110408) Cylindrical hole for positive locating Double-sided chipbreaker CVD-coated carbide material Suitable for turning of stainless steels Compatible with matching toolholder, shim, clamp and screws FAQ What material is this insert best suited for? The FNMG110408 T6215 insert is optimised for machining stainless steels, with the T6215 grade offering enhanced wear resistance for stable to slightly interrupted turning. How does the chipformer affect performance? The double-sided chipbreaker on this FNMG insert promotes controlled chip formation and evacuation, improving surface finish and reducing tendency for built-up edge when turning stainless steels. What are the key dimensional features to check for compatibility? Verify the 11 mm inscribed circle, 4.76 mm thickness, 0.8 mm corner radius and the cylindrical hole to ensure the insert matches the intended holder and clamping set. Is the grade suitable for interrupted cuts? The CVD-coated T6215 grade is designed for stable to slightly interrupted cutting conditions; for heavier interruptions, a tougher geometry or different grade may be preferable. Which tools are required to build the complete system? A compatible toolholder for the FNMG form, plus a matching shim/underlay, clamp and replacement screws are required to assemble the complete turning system for the FNMG110408 T6215 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110408 T9215 Wendeplatten - Tungaloy
Combining high wear resistance, stable chip formation and ISO compatibility, this insert delivers reliable productivity for medium steel turning; order the article directly via Metav Werkzeuge or consult our specialist team for application-specific advice. FNMG 110408 T9215 indexable insert for turning — Tungaloy The FNMG110408 T9215 Tungaloy indexable insert is an ISO‑standard rhombic insert for external and internal turning, optimised for productive machining of medium steels. CVD‑coated carbide for high wear resistance Suitable for medium steel machining Rhombic FNMG geometry, 11 mm size Double‑sided chipbreaker for consistent chips High productivity through wear‑resistant grade and stable edge The T9215 grade is a CVD‑coated carbide developed to combine wear resistance with edge robustness, enabling higher cutting parameters in continuous to lightly interrupted cuts. This results in improved cycle times and lower index‑change frequency, which directly supports higher overall productivity on repetitive turning operations. The coating technology and substrate balance thermal resilience and fracture toughness, reducing unexpected tool failure and stabilising component quality. Secure fit and ISO compatibility for straightforward integration Thanks to the ISO FNMG geometry and standard dimensions, the insert integrates easily into existing turning tool holders when form, tolerance, size and clamping match. The rhombic design and 0° relief angle contribute to predictable cutting engagement and simple seat alignment, while the central cylindrical hole ensures secure fastening in the clamp. If holder selection or clamping arrangements are uncertain, Metav Werkzeuge provides specification support to confirm compatibility and prevent setup errors — contact via info@metav-werkzeuge.com or +49 2822 7131930. Reliable chip control and surface quality with a double‑sided chipbreaker The double‑sided chipbreaker is engineered to produce repeatable chip forms during typical medium‑steel turning tasks, aiding uninterrupted production and cleaner machine bays. Controlled chip flow reduces rework and machine downtime while often improving the initial surface finish, particularly when combined with appropriate cutting data. Stable chipbreaking also lessens operator intervention in lights‑out or long‑run operations, contributing to a safer and more efficient process environment. Practical dimensions that support long tool life and process stability With a corner radius of 0.8 mm, an insert size of 11 mm and a thickness of 4.76 mm, this rhombic FNMG insert offers a good compromise between edge strength and form accuracy for turned parts. The cylindrical hole and standard seating enable precise clamping, which minimises vibration and enhances tool life. Choosing the correct radius and feed pairing reduces edge loading and wear, delivering consistent component tolerances and lower consumable costs over large batch runs. For high‑productivity turning with Tungaloy's T9215 grade, contact Metav Werkzeuge for tailored cutting data recommendations and fast supply via info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Manufacturer article number: 6799573 SKU: 6799573-Tungaloy Manufacturer SKU: TUN6799573 Model series: ISO indexable turning inserts Name: FNMG110408 T9215 Tungaloy indexable insert Dimensions & core data Corner radius: 0.8 mm Insert size: 11 mm Thickness: 4.76 mm Relief angle: 0° Approach angle: 50° Hole: with cylindrical hole Features & applications Grade/coating: T9215 (CVD‑coated carbide) Geometry: rhombic, FNMG Chipbreaker: double‑sided Application: external and internal turning Typical use: medium steel machining FAQ What materials is this insert best suited to? The FNMG110408 T9215 Tungaloy indexable insert is optimised for medium steel machining; the T9215 grade provides a balance of wear resistance and toughness for continuous to lightly interrupted cuts. Will the insert fit common FNMG toolholders? ISO‑standard FNMG geometry ensures compatibility with holders designed for FNMG110408 inserts, provided relief angle, size, thickness and clamping arrangement match the holder specifications. How does the T9215 grade affect cutting performance? T9215's CVD coating improves thermal and abrasive wear resistance while the carbide substrate maintains edge strength, enabling higher cutting parameters and longer intervals between index changes. Is the chip control suitable for unattended shifts? Yes, the double‑sided chipbreaker is designed for consistent chip formation, reducing the need for frequent operator intervention during extended production runs. Which dimensions should be checked before ordering? Confirm corner radius (0.8 mm), insert size (11 mm), thickness (4.76 mm), relief angle (0°) and hole style (cylindrical) to ensure correct seating and clamping for the intended toolholder Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110408 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide T9215 grade and ISO FNMG geometry for reliable, high-productivity turning of medium steels; order directly via Metav Werkzeuge or consult the technical advisers for compatibility and cut-zone recommendations. FNMG 110408 T9215 FNMG 110408 T9215 Turning insert — ISO rhombic insert for medium-steel turning by Tungaloy FNMG110408 T9215 is an ISO-compatible rhombic indexable insert designed for external and internal turning applications in medium steels, featuring a 0.8 mm corner radius and CVD-coated carbide for balanced wear resistance and fracture toughness CVD-coated carbide grade T9215 ISO FNMG rhombic insert, 0.8 mm corner radius Double-sided chipbreaker for continuous cuts Cylindrical hole for secure clamping Deliver consistent productivity in medium-steel turning with a robust grade This insert combines the T9215 CVD-coated carbide grade with an ISO FNMG geometry to deliver a balance of wear resistance and fracture toughness, making it particularly suited to continuous and lightly interrupted turning operations. The coating reduces flank wear and extends tool life under standard cutting conditions, which translates into fewer tool changes and a higher effective spindle uptime — a clear rational advantage for production environments seeking throughput improvements. Secure seating and predictable geometry for reliable process control The rhombic shape and cylindrical hole enable stable clamping in standard FNMG holders; compatibility depends on form, free clearance angle, tolerance class, attachment, size and thickness. The insert’s 0.8 mm corner radius helps produce good surface finish while offering resistance to edge chipping at moderate depths of cut. Clear, standardised geometry simplifies process planning and repeatability, supporting predictable cycle times and consistent part quality on batch and single-piece production runs. Built-in chip control and simple selection for varied turning tasks A double-sided chipbreaker provides effective chip formation for continuous cuts, reducing the need for complex coolant strategies and easing chip evacuation in many turning set-ups. Selecting the right chipbreaker and holder combination based on workpiece material and stability ensures the productive use of the grade; the composition and coating make this insert a first-choice option for a wide range of steel alloys where both economy and stability are required. Technical advisers can recommend the optimum holder and cutting parameters for specific machines and part geometries. For reliable medium-steel turning with Tungaloy’s T9215 CVD-coated carbide insert, contact Metav Werkzeuge for specification guidance, compatibility checks and ordering — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6799570 Manufacturer SKU: TUN6799570 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Thickness: 4.76 mm Size (inscribed circle): 11 mm Principal angle: 50° Free clearance angle: 0° Special features Material: carbide Coating: CVD-coated Grade: T9215 Plate shape: rhombic (FNMG) Insert designation: FNMG110408 Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (external and internal) FAQ Is this insert suitable for continuous turning of medium steel? The FNMG110408 T9215 indexable insert by Tungaloy is designed for medium-steel turning and performs well in continuous and lightly interrupted cuts due to its CVD-coated carbide grade and double-sided chipbreaker. Which holder characteristics determine compatibility with this FNMG insert? Compatibility is governed by the holder’s form, free clearance angle, tolerance class, attachment method, size and thickness; confirm the holder matches the ISO FNMG form and the insert’s cylindrical hole. How does the T9215 grade affect tool life and productivity? T9215 offers a combination of wear resistance and fracture toughness that extends service life under standard turning conditions, supporting sustained productivity and reduced tool-change frequency. Can the insert be used for internal turning as well as external turning? Yes — the rhombic FNMG geometry and the specified dimensions make it suitable for both external and internal turning operations when matched with the correct holder and process parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110408 T9225 Wendeplatten - Tungaloy
For dependable medium-to-heavy steel turning, the combination of the CVD-coated carbide in grade T9225 and the FNMG110408 geometry provides robust chip control and extended edge life; order the FNMG110408 T9225 directly via Metav Werkzeuge or contact our consultants for holder compatibility and process advice. FNMG110408 T9225 Tungaloy — ISO turning insert, CVD-coated carbide, 0.8 mm radius The FNMG110408 T9225 is an ISO-standard rhombic turning insert designed for external and internal turning applications, offering a robust universal grade for medium-to-heavy steel machining CVD-coated carbide grade T9225 Designed for medium-to-heavy steel turning Rhombic FNMG geometry, 0.8 mm radius Double-sided chipbreaker with cylindrical hole Stable performance for medium-to-heavy steel turning The FNMG geometry combined with the CVD-coated carbide of grade T9225 is optimised for stable cutting when conditions vary or intermittent cuts occur. The CVD layer provides a wear-resistant outer surface while the substrate delivers fracture resistance, so the insert balances tool life and toughness in demanding operations. For shops seeking predictable cycle times, this specification reduces unscheduled tool changes and supports steady production. The design is suitable for both external profiles and internal bore finishes, ensuring consistent results across typical turning tasks. Geometry and mounting that support process reliability The rhombic FNMG shape with a 0.8 mm corner radius and a 50° approach angle offers a compromise between strength and versatility; smaller radii aid fine finishing, while the geometry maintains edge support during heavier cuts. The insert is supplied with a cylindrical hole and a plate thickness of 4.76 mm, so compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening and size. The clearance angle of 0° here refers to the nominal relief geometry of the insert; correct holder selection and clamping ensure repeatable contact, optimal chip flow and reduced vibration for improved surface quality. Effective chip control and economical indexing Equipped with a double-sided chipbreaker, the insert permits both indexing options and economical use of cutting edges, lowering the cost per effective cutting edge. The chipbreaker pattern is chosen to match the material and stability of the setup: it promotes short, manageable chips in steel machining and supports thermal stability at common cutting speeds. As an indexable solution, the insert allows rapid edge change without regrinding, which streamlines tool management and contributes to overall process efficiency in production environments. Selection guidance and practical integration into the tool system Compatibility within the ISO turning system requires attention to holder geometry and fastening; the insert’s dimensions — FNMG110408 format, plate size 11 mm and the specified thickness — must match the seat and clamping method of the external holder or boring bar. Choose the chipbreaker and grade that correspond to workpiece material, machining strategy and machine-tool rigidity. If a combination of interrupted cuts and varying engagement is expected, the T9225 grade offers enhanced toughness suited to such mixed conditions while maintaining good wear resistance for longer tool life. For workshop-ready reliability choose the Tungaloy T9225 inserts supplied by Metav Werkzeuge — contact Metav Werkzeuge for availability, holder compatibility advice and tailored recommendations via info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: 6799583-Tungaloy Manufacturer SKU: TUN6799583 Manufacturer article number: 6799583 Brand: Tungaloy Model series: ISO turning inserts ISO designation: FNMG110408 Facts Corner radius: 0.8 mm Plate size: 11 mm Plate thickness: 4.76 mm Approach angle: 50° Clearance angle: 0° SKU: 6799583-Tungaloy Special features Schneidstoff: CVD-coated carbide Grade: T9225 – universal, robust for medium-to-heavy steel Geometry: rhombic FNMG Chipbreaker: double-sided Hole: cylindrical hole, with hole Typical application: external and internal turning System components: ISO insert, suitable external holder or boring bar, support shim/ clamp set and replacement screws FAQ What materials is this insert recommended for? The FNMG110408 in grade T9225 is recommended primarily for medium-to-heavy steel turning, offering a balance of toughness and wear resistance suited to variable engagement and mildly interrupted cuts. How does the CVD coating affect performance? A CVD coating on the carbide substrate increases surface wear resistance while retaining core toughness; in the FNMG110408 it helps extend edge life under typical turning speeds for steel. Is the insert compatible with standard FNMG toolholders? Compatibility depends on holder seat form, tolerance class, clamping and plate thickness; the FNMG110408 follows ISO dimensions, so it fits standard FNMG holders when the seat and fastening match the listed measurements. How many usable edges does the insert offer? The double-sided design provides multiple indexable cutting edges per insert, reducing cost per edge compared with single-sided inserts and enabling fast edge changes in production workflows. What should be considered when choosing the chipbreaker? Select a chipbreaker that matches the workpiece material, machining type and machine stability; the double-sided breaker on this insert is intended to promote short, controllable chips for steel applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110408 T9225 Wendeplatten - Tungaloy
Take advantage of the robust combination of productivity and process stability offered by the CVD-coated T9225 grade; its ISO-compliant geometry and secure clamping compatibility help maintain steady production and reduced downtime. Order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. FNMG 110408 T9225 — FNMG turning insert (50°) by Tungaloy FNMG110408 T9225 is an ISO‑format indexable turning insert designed for medium-to-heavy steel turning, featuring a 50° rhombic geometry and CVD‑coated carbide for reliable material removal. ISO FNMG 110408 profile CVD-coated carbide grade T9225 0.8 mm nose radius for robustness Double-sided chipbreaker, with hole Increased productivity through a robust carbide grade The CVD‑coated T9225 is engineered as a robust universal grade for medium-to-heavy steel turning, delivering improved wear resistance under varying engagement conditions. With a CVD-coated carbide substrate, the insert offers enhanced tool life and consistent cutting performance when the machining process demands increased toughness, for example during interrupted cuts or unstable clamping. This results in fewer index changes and less unplanned downtime, supporting higher overall throughput on the machine. Precise geometry and secure holder compatibility for stable cuts The rhombic FNMG geometry with a 50° approach angle provides good access for external machining while maintaining cutting stability. Key dimensions such as the 0.8 mm radius, 4.76 mm thickness and the ISO designation ensure that the insert seats correctly in compatible holders; compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness. The with hole design and cylindrical hole style contribute to repeatable clamping, reducing runout and improving surface finish in demanding turning operations. Shop-floor advantages that translate to lower operating cost A double-sided chipbreaker offers two usable cutting edges per side, maximising the number of indexed edges and improving cost efficiency per part produced. The chipbreaker is designed for stable chip control, which reduces manual intervention and risk of workpiece damage. Thanks to the insert’s robust construction and CVD coating, coolant strategies and cutting parameters can be optimised to raise cutting speeds where machine and workholding allow, delivering measurable time savings without compromising part quality. Versatile application range and recommended handling This indexable insert is primarily intended for turning of steel in medium-to-heavy operations, and the choice of chipbreaker and T9225 grade should be matched to material, engagement and machine stability. The carbide body resists thermal and mechanical wear, making it suitable for operations that feature slight interruptions or variable cutting depths. When installing the insert, ensure the holder matches the FNMG form and tolerance to maintain clamping security; correct seating and torque on replacement screws preserve repeatability and minimise the chance of vibration-related wear. For machining projects requiring reliable medium-to-heavy steel performance, contact Metav Werkzeuge for tailored recommendations on Tungaloy FNMG inserts and application support Technical data Article number: 6799586 Manufacturer SKU: TUN6799586 SKU: 6799586-Tungaloy Designation: FNMG110408 T9225 Tungaloy insert ISO designation: FNMG110408 Core technical data Insert form: rhombic (FNMG) Cutting radius: 0.8 mm Relief angle: 0° Approach angle: 50° Thickness: 4.76 mm Size: 11 Hole: with cylindrical hole Special features Grade: T9225 (CVD-coated carbide) Material: carbide Chipbreaker: double-sided Application: turning (external and internal) Compatibility: ISO indexable system; holder-dependent clamping FAQ What materials is this insert best suited for? This FNMG110408 T9225 insert is designed primarily for steel turning; the T9225 grade is a robust choice for medium-to-heavy steel operations. How many cutting edges are available per insert? The insert features a double-sided chipbreaker, providing multiple indexable edges to extend usable life before replacement. Does the insert require a specific holder type? Compatibility depends on holder form, relief angle, tolerance class and clamping method; the rhombic FNMG form requires a matching FNMG holder for secure clamping. Can this insert handle interrupted cuts? Yes, the T9225 grade and the insert’s toughness make it suitable for slightly interrupted cuts and variable engagement conditions. What are the key dimensions to verify when choosing a holder? Check the approach angle (50°), thickness (4.76 mm), size (11) and the 0.8 mm nose radius to ensure proper seating and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110412 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of an AH6225 PVD-coated carbide grade and a stable, sharp cutting edge for reliable stainless steel turning; the ISO‑conforming geometry and secure clamping features ensure predictable machining performance. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. FNMG 110412 AH6225 Tungaloy turning insert — PVD-coated carbide, 50° cutting angle A FNMG110412 AH6225 Tungaloy insert for ISO‑standard turning, optimised for stainless steels and neutral to medium cutting conditions. PVD-coated carbide grade AH6225 Designed for stainless steel machining Rhombic FNMG geometry with 50° cutting angle Double-sided chipbreaker, cylindrical hole for clamping Optimised cutting performance for stainless steels The FNMG geometry combined with the AH6225 PVD‑coated carbide provides a balance between edge sharpness and wear resistance, which is particularly beneficial when machining stainless steels. The grade is tuned for variable conditions and intermittent cuts, so the insert sustains a sharp cutting edge while reducing the risk of built‑up edge. The PVD coating improves thermal resistance and lowers friction at the tool–workpiece interface; this translates into more consistent surface finish and extended edge life under medium cutting parameters. For shops seeking reliable outcomes in turning operations, the combination of substrate and coating reduces downtime and supports predictable cycle times. Precise geometry to simplify set‑up and increase stability The rhombic plate form and the specified 50° main cutting angle deliver good accessibility for external and internal turning; combined with a corner radius of 1.2 mm, the insert produces robust profiles and improved tool life in interrupted cuts. The zero relief angle (0°) and a plate thickness of 4.76 mm contribute to mechanical stability under radial loads, while the cylindrical hole enables secure clamping in standard ISO holders. Because compatibility depends on form, free angle, tolerance class, clamping and size, the ISO designation helps to match the insert to suitable holders and adaptors quickly, shortening set‑up time and reducing trial adjustments. Chip control and operational reliability for production environments This indexable plate is equipped with a double‑sided chipbreaker, which aids controlled chip formation across a range of feeds and depths of cut. The feature improves swarf evacuation and reduces rework risk on longer parts. The plate’s universal focus on stainless steel turning makes it a practical choice where material grades and component geometries vary: a single insert grade can often cover multiple jobs, improving inventory turnover. The ISO conformity and clearly defined dimensions support predictable exchangeability between machines and tool columns, fostering reproducible results and smoother process planning. For application guidance on Tungaloy’s AH6225 grade and availability of FNMG110412 inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored recommendations and stock information Technical data Article number: 6947654 Manufacturer SKU: TUN6947654 SKU: 6947654-Tungaloy Facts Geometry: FNMG110412 Size: 11 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Main cutting angle: 50° Special features Material: Carbide Coating: PVD Grade: AH6225 Plate form: Rhombic Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided FAQ How is compatibility with toolholders ensured? Compatibility is determined by form, free angle, tolerance class, clamping method, size and thickness; the ISO designation for this FNMG110412 AH6225 Tungaloy insert assists in matching the plate to standard external holders and boring bars. Which materials is this grade suitable for? The AH6225 grade is a universal choice for stainless steels, engineered to provide a sharp, stable cutting edge for medium turning conditions. What does PVD‑coated carbide mean for tool life? A PVD coating on a carbide substrate increases thermal and abrasive resistance, reducing adhesion and wear at the cutting edge; this leads to more consistent tool life and improved surface quality when using the FNMG110412 insert. What are the key geometry values to note? Relevant dimensions include a corner radius of 1.2 mm, a plate thickness of 4.76 mm, a relief angle of 0° and a main cutting angle of 50°, all of which influence stability and profile integrity. Why is the chipbreaker and hole important? The double‑sided chipbreaker controls chip formation across varying feeds, while the cylindrical hole ensures secure clamping, contributing to stable machining and reliable repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110412 AH6225 Wendeplatten - Tungaloy
Benefit from a robust combination of PVD-coated AH6225 carbide and a rhombic 50° geometry that delivers stable cutting performance in stainless steel turning; the 1.2 mm nose radius and double-sided chipbreaker extend edge life and reduce tooling costs. Order directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. FNMG110412 AH6225 ISO turning insert for external and internal turning – Tungaloy, 50° rhombic (0° relief) The FNMG110412 AH6225 is a rhombic ISO turning insert designed for versatile external and internal turning operations, optimised for machining stainless steels under changing conditions. *PVD-coated carbide AH6225 grade *Optimised for stainless steel turning *Rhombic 50° insert, 1.2 mm nose radius *Double-sided insert with cylindrical hole Consistent cutting performance for stainless steel components The combination of a PVD-coated surface and AH6225 grade carbide provides a balance between a sharp cutting edge and structural stability, which is particularly beneficial when machining stainless steel with variable workpiece conditions. The coating reduces adhesive wear and thermal impact at the cutting edge, meaning fewer unexpected interruptions and more consistent cycle times. Compatibility with ISO tooling systems ensures straightforward integration into existing setups where form, clearance, tolerance class, mounting and thickness determine fit. Reliable chip control and edge strength for dependable finishes The double-sided chipbreaker geometry promotes predictable chip control, helping to avoid entanglement and supporting stable machining at medium cutting depths. The 1.2 mm nose radius increases edge strength for interrupted cuts while still contributing to a good surface finish on finished parts. The rhombic 50° approach angle and 0° relief influence cutting forces and should be matched to an appropriate holder and cutting parameters for optimum life and surface quality. Where moderate feeds and mixed machining conditions occur, this insert reduces the need for frequent indexing. Practical integration into ISO turning systems Installed as part of a standard ISO insert system — comprising the insert, a compatible external holder or boring bar, an underlay/clamping kit and replacement screws — the insert simplifies inventory and maintenance planning. The cylindrical hole provides secure clamping and repeatable positioning. For process planning, consider the insert’s PVD coating and grade when selecting speeds and feeds to exploit wear resistance and maintain dimensional accuracy. The modest plate thickness and rhombic form make the insert a flexible choice across a range of medium-turning tasks. Contact Metav Werkzeuge for tailored advice on using the Tungaloy FNMG110412 AH6225 turning insert and for assistance selecting the correct holder or machining parameters; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947650 Manufacturer SKU: TUN6947650 SKU: 6947650-Tungaloy Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Facts Nose radius: 1.2 mm Relief angle: 0° Approach angle: 50° Plate thickness: 4.76 mm Plate size: 11 Special features Material: carbide Coating: PVD Grade: AH6225 ISO designation: FNMG110412 Shape: rhombic Chipbreaker: double-sided Mounting: with cylindrical hole Typical application: external and internal turning Compatibility criteria: form, clearance, tolerance class, mounting, size, thickness FAQ What materials is this insert best suited for? The FNMG110412 AH6225 insert is optimised for stainless steel machining and performs well in medium turning operations where a stable cutting edge is required. How does the PVD coating affect performance? The PVD-coated surface on the AH6225 grade minimises adhesive wear and thermal softening, extending tool life and helping to maintain consistent cutting conditions with the FNMG110412 insert. What does the double-sided chipbreaker deliver in practice? A double-sided chipbreaker provides repeatable chip control and multiple indexed cutting edges, improving productivity by reducing the frequency of insert changes. How should the insert be matched to a holder? Insert compatibility is determined by ISO form, clearance angle, tolerance class, mounting style, size and thickness; select a holder that matches the FNMG110412 geometry and the intended cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110412 AH8015 Wendeplatten - Tungaloy
Take advantage of the ISO conformity, the PVD‑coated AH8015 grade and the 1.2 mm corner radius to achieve stable cutting performance and consistent tool life in turning operations; order the inserts directly via Metav Werkzeuge or consult the technical team for grade and holder compatibility. FNMG 110412 AH8015 indexable insert for turning (Tungaloy) The FNMG110412 AH8015 is an ISO‑standard rhombic indexable insert designed for external and internal turning of heat‑resistant alloys and general turning applications. ISO rhombic insert FNMG 110412 PVD-coated AH8015 carbide grade 50° approach angle for versatile turning Double-sided insert with cylindrical hole High‑performance grade for heat‑resistant alloys The insert is made from cemented carbide and finished with a PVD‑coating specified as the AH8015 grade, delivering a balanced mix of wear resistance and cutting‑edge stability. This composition makes the component particularly suited for machining heat‑resistant alloys, where temperature and abrasive wear demand a resilient cutting edge. The result is a longer productive life and fewer tool changes, contributing directly to reduced cycle times and improved process consistency. Consistent geometry for predictable machining results Built to the ISO‑standard FNMG geometry with a 50° cutting angle and a 1.2 mm corner radius, the insert provides stable engagement with the workpiece and a predictable chip formation. The double‑sided design doubles the available cutting edges per insert, improving cost efficiency, while the cylindrical hole ensures secure clamping in compatible toolholders. These geometric elements combine to reduce vibration and support repeatable surface finishes in both roughing and finishing passes. Practical system integration and holder compatibility The insert is intended for use within a standard ISO turning system—paired with an external holder or a boring bar, plus the appropriate shim/clamp set and fastening screws. Compatibility depends on form, relief angle, tolerance class, fixing method, size and thickness; the ISO‑standard format simplifies selection and interchangeability, enabling straightforward replacement without re‑qualifying the tool path in most setups. This reduces downtime during tool changes and maintains production flow. Selection guidance and application benefits With a 0° relief angle and medium plate thickness (4.76 mm), the insert is optimised for general turning applications where a balance between edge strength and cutting forces is required. The AH8015 grade is described as a first choice for general machining of heat‑resistant alloys—offering good wear resistance without sacrificing edge robustness. Choosing this insert supports a pragmatic approach to tooling: fewer interruptions, consistent part quality and scalable performance across different turning tasks. For tailored advice on using the Tungaloy AH8015 grade in specific turning operations, contact Metav Werkzeuge for application guidance and ordering: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 6799674 SKU: 6799674-Tungaloy Manufacturer SKU: TUN6799674 Model series: ISO turning indexable inserts Material: cemented carbide Core specifications Insert designation: FNMG110412 Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 11 mm Cutting angle: 50° Relief angle: 0° Hole: with cylindrical hole Design and special features Grade/coating: AH8015 (PVD-coated) Chipbreaker: double-sided Plate shape: rhombic Sidedness: double-sided indexable insert Typical application: turning System components: insert, holder/boring bar, shim/clamp set, spare screws FAQ What materials is this insert suited for? The FNMG110412 AH8015 insert from Tungaloy is optimised for heat‑resistant alloys and general turning tasks thanks to the AH8015 PVD grade and cemented carbide substrate. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength and delivers improved surface finish stability during turning with the FNMG110412 insert, reducing the likelihood of chipping under interrupted cuts. Is the insert compatible with standard FNMG holders? Yes, the FNMG110412 follows ISO dimensions and secures via a cylindrical hole, ensuring compatibility with corresponding FNMG external holders and boring bars when form, thickness and tolerance class match. How many cutting edges are available per insert? This is a double‑sided indexable insert; the construction provides multiple usable edges before disposal, improving edge economy for the FNMG110412 AH8015. What is the main advantage of the AH8015 grade? The AH8015 PVD‑coated grade offers a balance between wear resistance and edge stability, making it a practical first choice for machining heat‑resistant alloys with predictable tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110412 AH8015 Wendeplatten - Tungaloy
The combination of PVD-coated carbide grade AH8015, ISO-standard geometry and a double-sided chipbreaker delivers predictable tool life and stable chip control, improving throughput and surface quality. Order the FNMG 110412 AH8015 turning insert directly via Metav Werkzeuge or ask the consultants if needed. FNMG 110412 AH8015 – turning insert by Tungaloy (PVD-coated carbide, 50°) FNMG 110412 AH8015 is an ISO-format turning insert designed for external and internal turning tasks in industrial machining, offering a balance of wear resistance and edge stability for heat-resistant alloys ISO-standard geometry for secure fitting PVD-coated carbide for balanced wear life Double-sided chipbreaker for reliable chip control Rhombic 11 mm insert with cylindrical hole Consistent productivity through balanced tool design The FNMG geometry with a 50° lead angle and PVD coating provides a measured trade-off between cutting-edge stability and wear resistance. The AH8015 grade is engineered as a reliable choice for machining heat-resistant alloys, giving a consistent surface finish while extending time between indexings. Because the insert is double-sided, stocking requirements are reduced and effective cutting length per insert is increased, which contributes directly to higher throughput and lower machine downtime. The ISO-standard form ensures interchangeability across established holder systems and supports process planning in production environments. Precise fit reduces set-up time and enhances process security Compatibility with a toolholder is governed by form, clearance angle, tolerance class, fastening method, size and thickness; the ISO-format FNMG design simplifies selection and replacement. The rhombic shape with a cylindrical hole and a corner radius of 1.2 mm offers predictable seating and clamping behaviour, which helps maintain repeatable cutting geometries. For workshop managers and operators focused on process security, the standardised geometry reduces setup errors and supports stable machining parameters. Information on holder type and clamping accessories should be confirmed against the holder specifications to ensure optimal performance and secure clamping. Application guidance for material and chip control This insert is most effective for turning operations where moderate to high thermal loads arise, notably when machining heat-resistant alloys. The double-sided chipbreaker is designed for controlled fragmentation under varying depths of cut; selection of cutting data and the correct chipbreaker variant should be matched to workpiece material and machine rigidity. The modest corner radius supports a mix of robust edge strength and acceptable surface quality for finishing passes. For situations requiring specific edge preparation or alternative grades, the AH8015’s balanced properties make it a good starting point and allow straightforward adaptation to adjacent carbide grades where higher wear resistance or greater toughness is required. For application advice or to secure stock of the Tungaloy FNMG 110412 AH8015 turning insert (SKU TUN6799671), contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6799671 Manufacturer SKU: TUN6799671 Seller SKU: 6799671-Tungaloy Dimensions & measurable data Insert size: 11 mm Lead angle: 50° Corner radius: 1.2 mm Clearance angle: 0° Hole: with cylindrical hole Insert form: rhombic Materials & special features Material: carbide Coating: PVD-coated Grade: AH8015 Chipbreaker: double-sided Application: turning (external and internal) ISO-standard insert compatible with ISO holders FAQ Which materials is this insert best suited for? The FNMG 110412 AH8015 insert is primarily intended for machining heat-resistant alloys and performs well where a balance of wear resistance and edge stability is required; it is suitable for both external and internal turning operations. What does the AH8015 grade offer in practice? AH8015 is a PVD-coated carbide grade that provides balanced wear behaviour and cutting-edge stability, making it a first-choice option for general machining of temperature-resistant materials with predictable tool life. How can compatibility with existing toolholders be verified? Compatibility depends on geometry, clearance angle, tolerance class, fastening and size; the ISO-format FNMG geometry and the rhombic shape with a cylindrical hole facilitate a secure fit in ISO-compatible holders when the holder matches the FNMG 110412 dimensions. What measures improve chip control with this insert? Selecting the correct double-sided chipbreaker variant, matching cutting data to material and ensuring machine-tool rigidity are key to optimising chip control and surface finish with the FNMG 110412 AH8015 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110412 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a wear‑resistant CVD-coated carbide grade, a secure rhombic geometry and precise dimensional data to keep turning operations consistent and productive; order directly via Metav Werkzeuge or consult the technical team for application support. FNMG 110412 T6215 turning insert (CVD-coated carbide) by Tungaloy The FNMG110412 T6215 is a CVD‑coated cemented carbide insert for precision turning, optimised for stainless steel under stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 Suitable for stainless steel turning Rhombic insert with 50° lead angle Double-sided insert with cylindrical hole Increased productivity through wear-resistant grade and coating The combination of a CVD coating and a robust cemented carbide substrate provides prolonged edge life and consistent cutting performance when machining stainless steels. The T6215 grade is formulated for stable to slightly interrupted turning, reducing flank wear and helping to maintain target surface finish over longer tool cycles. This reduces unplanned changeovers and contributes to more predictable production planning. Reliable clamping and geometry for repeatable results The rhombic FNMG geometry, with a 50° lead angle and a 0° clearance angle, delivers a balance between cutting stability and accessibility for external and internal operations. The 1.2 mm corner radius and a plate thickness of 4.76 mm offer reliable edge strength for a range of feeds, while the cylindrical hole ensures secure mounting and consistent position in compatible holders. Compatibility is determined by holder form, tolerance class, attachment and size, enabling accurate replacement in established tool systems. Practical system use and application guidance As a double‑sided, indexable insert with a double-sided chipbreaker, the part supports economical use of both cutting edges and straightforward inventory management. The insert is intended for integration into a system comprising an insert, matching external holder or boring bar, a shim or clamp set and replacement screws. Selecting the appropriate chipbreaker and machining parameters according to workpiece condition and rigidity will promote stable chip control and process reliability. For application advice or to order Tungaloy FNMG110412 T6215 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for targeted recommendations and availability. Technical data Article number: 6945201 Manufacturer SKU: TUN6945201 SKU: 6945201-Tungaloy Model series: ISO turning inserts Designation: FNMG110412 T6215 Tungaloy insert Numerical data Corner radius: 1.2 mm Thickness: 4.76 mm Size: 11 Lead angle: 50° Clearance angle: 0° Design & features Shape: rhombic (FNMG) Hole: cylindrical hole Sidedness: double-sided, indexable Chipbreaker: double-sided chipbreaker Coating: CVD coating (T6215) Material: cemented carbide Intended application: turning of stainless steel under stable to slightly interrupted conditions System notes: compatibility depends on holder form, clearance angle, tolerance class, attachment, size and thickness FAQ Which materials is this insert best suited for? The FNMG110412 T6215 insert is optimised for machining stainless steel, with the CVD coating and grade tailored for stable to slightly interrupted turning. How does the insert mount in a holder? The insert uses a cylindrical hole and is designed for secure clamping; compatibility with a specific holder depends on form, tolerance class, attachment method, size and thickness. Is the insert indexable and economical to use? Yes, the double‑sided design provides multiple usable edges, making the insert indexable and cost‑effective for repetitive turning operations. What are the key dimensions to consider when replacing an insert? Key dimensions are the 1.2 mm corner radius, 4.76 mm thickness, size 11, 50° lead angle and 0° clearance angle; these determine fit and cutting behaviour for the intended holder and application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110412 T6215 Wendeplatten - Tungaloy
Take advantage of the proven combination of a CVD‑coated carbide grade and ISO compatibility to increase process reliability and tool life in stainless steel turning; the double‑sided chipbreaker and 1.2 mm corner radius support stable chip formation and consistent surface finish. For application advice or to check stock and delivery, contact Metav Werkzeuge. FNMG110412 T6215 FNMG indexable insert for turning — Tungaloy The FNMG110412 T6215 is an ISO‑standard indexable insert for external and internal turning, optimised for machining stainless steels under stable to slightly interrupted cutting conditions. CVD‑coated carbide grade T6215 for wear resistance ISO‑standard FNMG110412 with 50° cutting angle Double‑sided chipbreaker and 1.2 mm corner radius Rhombic shape with cylindrical mounting hole for secure clamping Proven wear resistance for predictable cycle times The insert’s CVD‑coated carbide composition (grade T6215) delivers a hard, wear‑resistant surface that reduces flank and crater wear during continuous turning of stainless steel. This results in longer tool life and fewer indexings, which in turn lowers downtime and tool‑change frequency. The double‑sided chipbreaker contributes to controlled chip formation, improving process stability and making the cutting behaviour more repeatable across batches. Such technical characteristics translate directly into measurable production benefits: fewer interruptions, steadier part quality and a more predictable tool cost per component. ISO conformity and mechanical compatibility for quick integration Designed to the ISO‑standard FNMG110412, this insert features a rhombic profile and a 50° cutting angle, allowing straightforward replacement in conventional FNMG holders. The insert includes a cylindrical mounting hole for positive clamping and a plate thickness of 4.76 mm, ensuring dimensional stability when subjected to clamping forces. These mechanical details enable reliable seating and repeatable positioning in existing tool systems, reducing setup time and minimising rework due to misalignment. The result is an insert that integrates easily into established turning cells while maintaining tight tolerances. Application focus: stainless steel turning with reduced process risk With a corner radius of 1.2 mm and a clearance angle of 0°, the insert is tailored for general external and internal turning where smooth surface finish and consistent edge strength are required. The grade is developed for stable to lightly interrupted cuts, providing robust performance on parts where chip control and edge life are critical. The combination of geometric parameters and the T6215 coating supports good surface integrity and helps avoid premature edge failure, which is especially important when machining austenitic stainless steels that tend to work‑harden. For shops seeking dependable performance with a low risk of unexpected tool‑related scrap, this insert is a practical choice. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy turning inserts and to confirm availability for immediate production use Technical data Article number: 6945204 Manufacturer SKU: TUN6945204 SKU: 6945204-Tungaloy Series: ISO‑turning indexable inserts Facts Size: 11 mm Thickness: 4.76 mm Corner radius: 1.2 mm Cutting angle: 50° Clearance angle: 0° Special features Grade: T6215 (CVD‑coated carbide) Plate form: rhombic Mounting: cylindrical hole Chipbreaker: double‑sided Application: turning (external and internal) Compatibility: ISO‑standard FNMG110412 holders FAQ What materials is this insert suitable for? This Tungaloy indexable insert (FNMG110412 T6215) is optimised for stainless steel machining and performs well under stable to slightly interrupted turning conditions. Is the insert single‑ or double‑sided? The insert is double‑sided, which allows both edges to be used for extended tool life before replacement. What is the corner radius and how does it affect finish? The corner radius is 1.2 mm; this radius provides a balance between edge strength and surface finish, supporting consistent part quality on turned components. How is the insert secured in the holder? The insert uses a cylindrical mounting hole for positive clamping in compatible ISO FNMG holders, ensuring repeatable seating and stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110412 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide in grade T9215 and a 1.2 mm corner radius for robust edge life and consistent chip control; this delivers productive turning with reliable surface quality. Order the FNMG110412 T9215 turning insert directly via Metav Werkzeuge or consult our specialists for precise holder compatibility. FNMG 110412 T9215 rhombic turning insert (ISO) by Tungaloy — CVD-coated carbide, 1.2 mm radius A FNMG 110412 T9215 ISO-standard indexable insert for external and internal turning, designed for medium steel machining with an emphasis on productive, continuous to lightly interrupted cuts CVD-coated carbide grade T9215 Rhombic 11 mm size, 50° geometry 1.2 mm corner radius for robust edges Double-sided chipbreaker, cylindrical hole High productivity thanks to wear-resistant coating and material The combination of a CVD-coated surface and a carbide substrate in grade T9215 offers a clear productivity advantage for serial and batch turning. The coating increases wear resistance, reducing flank wear and prolonging useful edge life, while the carbide core maintains fracture toughness under continuous loads. This results in steadier material removal rates, fewer insert changes and improved machine utilisation when machining medium steel. Geometry designed for reliable edge strength and chip control The rhombic insert format with a nominal size of 11 mm and the 50° included angle provides a compact cutting edge suited to versatile turning tasks. The 1.2 mm corner radius enhances edge robustness, helping to absorb impact at moderate depths of cut, while the double-sided chipbreaker promotes predictable chip formation and evacuation. The insert’s cylindrical hole and ISO-standard dimensions ensure mechanical compatibility; holder selection must match form, clearance angle, tolerance class, fastening and thickness for correct clamping. Application advantages in medium steel and versatile turning operations Designed as a first choice for mid-range steel machining, this insert performs well in continuous and light interrupted cuts, delivering consistent surface finish and repeatable tool life. The controlled chip formation provided by the chipbreaker reduces built-up edge and helps maintain dimensional stability across workpieces. The grade’s balance between wear resistance and toughness is particularly suitable where productivity and predictable tool change intervals are priorities. Practical considerations for integration and process planning Compatibility with toolholders depends on standardised ISO parameters—form, free angle, tolerance class, fixing method, size and thickness—so matching the insert to the correct clamping system avoids runout and ensures repeatable results. For optimal performance, pair the insert with holders designed for 50° geometry and ensure cutter seats and screws meet the relevant tolerance classes. Where cutting stability is limited, select a more positive holder or reduce overhang to protect the cutting edge and maintain surface quality. Contact Metav Werkzeuge for precise holder matching and genuine Tungaloy FNMG 110412 T9215 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast delivery Technical Data Article number: 6799571 Manufacturer SKU: TUN6799571 SKU: 6799571-Tungaloy Model series: ISO indexable turning inserts Designation: FNMG110412 Brand: Tungaloy Key Measurements Size: 11 mm Thickness: 4.76 mm Corner radius: 1.2 mm Insert angle: 50° Clearance angle: 0° Hole: cylindrical Material & Features Material: carbide Coating: CVD-coated (T9215) Shape: rhombic, double-sided Chipbreaker: double-sided chipbreaker Application: turning (external and internal) Suitability: medium steel machining, continuous to light interrupted cuts FAQ Is this insert compatible with common ISO holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; the FNMG110412 format follows ISO standards, so matching those parameters ensures correct fit and clamping. Which materials is the grade T9215 best suited for? The T9215 CVD-coated grade is optimised for medium steel machining, offering a balance of wear resistance and toughness for productive cutting in continuous and lightly interrupted conditions. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases the edge strength and resistance to chipping, improving tool life and allowing slightly higher depths of cut compared with finer radii, especially under steady cutting conditions. Can the insert be rotated or reversed to extend life? The double-sided design permits indexation to a fresh edge when wear appears; ensuring correct clamping and minimal runout will maximise the number of effective edge changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110412 T9215 Wendeplatten - Tungaloy
Combining CVD-coated carbide T9215, a 1.2 mm corner radius and double-sided indexing, this insert offers durable edge life and stable machining performance for medium steel. Order directly via Metav Werkzeuge or consult our team for tailored cutting-data recommendations. FNMG 110412 T9215 Tungaloy turning insert — CVD-coated carbide, 50° rhombic FNMG110412 T9215 is an ISO‑standard indexable turning insert for external and internal turning in medium steels FNMG110412 geometry, 50° rhombic CVD-coated carbide grade T9215 1.2 mm corner radius for edge strength Double-sided insert with cylindrical hole High productivity through wear-resistant grade and controlled chip formation The combination of T9215 grade and CVD-coated carbide delivers pronounced wear resistance while maintaining fracture resistance, making it well suited to continuous and lightly interrupted cuts in medium steel. The coating improves surface hardness and thermal stability, so cutting parameters can be pushed for higher material removal rates without disproportionate tool wear. Selecting the correct chipbreaker and cutting parameters helps to convert the material and coating properties into consistent, predictable productivity and extended tool life. Secure mounting and geometry that balances strength and finish The 50° rhombic shape with a 1.2 mm corner radius provides a robust cutting edge that still supports acceptable surface finish. The insert’s cylindrical hole and standard ISO form ensure reliable clamping in compatible holders; compatibility depends on form, relief angle, tolerance class, mounting type, size and thickness. Being double-sided doubles the number of usable edges per insert, reducing tooling cost per machined part and simplifying index changes during production. Practical system integration and setup guidance for turning operations Designed as part of an ISO turning system, the insert integrates with a matching external holder or boring bar plus a shim/clamp set and replacement screws. The 4.76 mm thickness contributes to rigidity in less rigid set-ups, and the 0° relief angle indicates the geometry’s suitability for stable, supported cutting conditions rather than aggressive, unsupported profiling. Specifying the right chipbreaker and matching the grade to the workpiece stability converts the insert’s technical characteristics into reliable cycle times and repeatable component quality. Contact Metav Werkzeuge for cutting‑data recommendations and procurement assistance for Tungaloy turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6799574 Manufacturer SKU: TUN6799574 Our SKU: 6799574-Tungaloy Designation: FNMG110412 Facts Corner radius: 1.2 mm Included angle: 50° Relief angle: 0° Thickness: 4.76 mm Size: 11 Special features Material: carbide Coating / grade: T9215 (CVD-coated) Geometry: rhombic, 50° Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is this insert recommended for? The Tungaloy FNMG110412 T9215 insert is optimised for medium steel machining; the T9215 grade balances wear resistance and fracture toughness for productive turning. How many cutting edges are available per insert? This indexable insert is double‑sided, providing two usable cutting edges per face and allowing multiple indexings before disposal. Which holder features must match the insert? Compatibility requires matching the insert form, relief (clearance) angle, tolerance class, mounting type, size and thickness to the holder; the cylindrical hole secures the insert in standard ISO clamping systems. Can this insert be used in interrupted cuts? The T9215 grade and robust geometry perform well in continuous and slightly interrupted cuts; heavier interruptions require evaluation of holder rigidity and cutting conditions. What system components are required to use the insert? A suitable external holder or boring bar, a shim/clamp set and the recommended replacement screws form the complete turning assembly for safe and repeatable operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110412 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of high process reliability, a CVD-coated cemented carbide grade and proven chip control for uninterrupted turning operations; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. FNMG 110412 T9225 indexable turning insert – Tungaloy, CVD-coated carbide, rhombic FNMG geometry FNMG110412 T9225 is an ISO-format, rhombic turning insert designed for robust external and internal turning in steels; the insert offers a 50° cutting angle and is intended for medium to heavy-duty operations. CVD-coated cemented carbide for durability Robust grade for medium to heavy steel Rhombic FNMG shape, 50° cutting angle Double-sided chipbreaker, cylindrical hole Precision and productivity for continuous turning The FNMG insert delivers a balance between edge strength and wear resistance by using a CVD-coated cemented carbide grade. This construction supports stable chip formation and consistent cutting forces during varying engagement conditions, which reduces unexpected tool changes and downtime. For production environments where cycle times and reproducibility matter, the combination of geometry and coating translates into fewer interventions at the machine and more predictable component tolerances. Compatibility and mounting for reliable clamping ISO-standard geometry guarantees interchangeability with FNMG holders, but compatibility depends on form, clearance, tolerance class, fastening and thickness. The insert features ISO FNMG geometry, a rhombic plate form and a cylindrical hole for positive clamping; its 50° cutting angle and 0° clearance ensure predictable approach angles for many external and internal turning set-ups. Understanding these interface criteria simplifies integration into existing toolholders and helps maintain secure seating under interrupted cuts. Grade selection and chip control for fewer rejects The T9225 grade is a robust universal mix that combines edge toughness with abrasion resistance, particularly suited to medium to heavy steel machining where changing engagement or slight interruptions demand higher resilience. The insert is double-sided with an integrated chipbreaker, enabling two cutting edges per index and efficient chip control when turning steels. For operators new to insert selection: tougher grades reduce edge chipping risk in unstable cuts, while the CVD coating improves resistance to flank wear, extending usable life in serial production. For machining enquiries or application advice on the FNMG 110412 T9225 insert, contact Metav Werkzeuge for tailored recommendations and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6799587 SKU: 6799587-Tungaloy Manufacturer SKU: TUN6799587 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Facts Plate size: 11 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Cutting angle: 50° Clearance angle: 0° Special features ISO FNMG geometry Rhombic plate form Cylindrical hole for clamping Double-sided chipbreaker CVD-coated grade T9225 Suitable for turning, external and internal FAQ What materials is this insert suited for? The FNMG 110412 T9225 insert is intended primarily for medium to heavy steel machining, offering toughness and wear resistance for variable engagement conditions. How is the insert mounted and how many edges are available? The rhombic FNMG geometry with a cylindrical hole enables secure clamping in compatible holders; the insert is double-sided, providing two usable cutting edges before indexing. Which coating and grade does this insert use? This turning insert is supplied in the T9225 grade with a CVD-coated cemented carbide substrate, optimised for robust performance in demanding steel operations. Can this insert handle interrupted cuts? Yes, the T9225 grade emphasises toughness and is designed to resist chipping under slightly interrupted cuts, improving process reliability. Is the FNMG 110412 compatible with standard FNMG holders? Compatibility follows ISO FNMG standards, but correct selection requires matching form, tolerance and thickness to the holder specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110412 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard geometry, CVD-coated carbide T9225 and a 1.2 mm corner radius to ensure stable chip formation and dependable performance in medium-to-heavy steel turning; order genuine parts or consult Metav Werkzeuge for application advice. FNMG110412 T9225 ISO turning insert — Tungaloy, robust CVD-coated carbide for turning FNMG110412 T9225 is an ISO-standard rhombic turning insert designed for external and internal turning, offering reliable cutting under variable engagement conditions. ISO-standard rhombic insert, 50° geometry CVD-coated carbide grade T9225, robust performance 1.2 mm corner radius for stable cutting Double-sided chipbreaker, suitable for turning Reliable cutting performance under variable conditions The CVD-coated carbide grade T9225 is engineered for medium-to-heavy steel turning, providing an optimal balance of toughness and wear resistance when cutting is intermittent or engagement varies. The coating enhances surface hardness and heat resistance, while the substrate maintains edge support; together they reduce flank wear and prolong tool life. For process planners this means fewer tool changes and more predictable cycle times, particularly in demanding batch production or mixed-geometry components where stability matters. Secure fit and fast integration with existing holders ISO standardisation and the rhombic form make the insert straightforward to match with compatible holders: compatibility depends on insert form, relief angle, tolerance class, fixing method, size and thickness. The 50° geometry and 0° relief angle deliver a versatile cutting orientation for a wide range of external and internal turning operations. The insert’s cylindrical hole and mounting style ensure repeatable clamping, while the double-sided chipbreaker provides two usable edges per index, reducing tooling costs and simplifying inventory management. Predictable surface quality and efficient chip control With a 1.2 mm corner radius and a dedicated chipbreaking design, this insert promotes stable cutting forces and consistent surface finish in steel applications. The grade is described as a robust universal choice for tougher cuts, so it is suitable where slight interruptions or variable feeds require added toughness rather than purely hard grades. For production engineers seeking reproducible results, the combination of geometry, chip control and coating yields efficient metal removal with fewer process deviations. Contact Metav Werkzeuge for tailored application support and immediate availability of genuine Tungaloy FNMG110412 T9225 inserts; technical consultation and delivery coordination are provided by Metav Werkzeuge. Technical data Article number: 6799584 Manufacturer SKU: TUN6799584 Metav SKU: 6799584-Tungaloy Designation: FNMG110412 T9225 Tungaloy insert Facts Corner radius: 1.2 mm Inscribed circle / plate size: 11 mm Wedge angle: 50° Relief angle: 0° Geometry: rhombic Hole: cylindrical hole Special features Material: CVD-coated carbide (robust universal grade T9225) Model series: ISO turning inserts Chipbreaker: double-sided Typical application: external and internal turning Compatibility: determined by form, relief angle, tolerance class, fixing, size and thickness FAQ What materials is this insert intended for? The FNMG110412 T9225 insert is optimised for steel machining and is a robust universal grade suitable for medium-to-heavy turning operations. Can the insert be used for both external and internal turning? Yes, the ISO-standard shape and cylindrical hole allow the FNMG110412 T9225 insert to be used in both external and internal turning applications when paired with the correct holder. How does the T9225 grade affect tool life? The CVD-coated T9225 grade offers a balance of wear resistance and toughness; this supports stable chip formation and consistent tool life under variable engagement conditions. How many cutting edges are available per insert? The double-sided chipbreaker design provides multiple usable edges per index, enabling economical edge changes and reducing overall tooling costs for the FNMG110412 T9225 insert. Which holder characteristics must be checked for compatibility? Ensure the holder matches the insert form, relief angle (0°), tolerance class, fixing method, size (11 mm inscribed circle) and thickness to guarantee proper clamping and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
KNMX 160405 GH330 Wendeplatten - Tungaloy
Benefit from the combination of GH330 wear resistance, a robust carbide substrate and a compact parallelogram geometry for consistent, productive turning results; order the KNMX160405 insert directly via Metav Werkzeuge or ask our consultants if needed. KNMX160405 GH330 Tungaloy indexable turning insert — 55° parallelogram, 0.5 mm radius The KNMX160405 GH330 is an ISO-standard indexable turning insert engineered for external and internal turning, offering a balanced combination of wear resistance and edge stability for general turning tasks. KNMX160405 ISO insert, parallelogram shape GH330 grade for wear resistance and toughness 55° cutting edge angle for versatile turning 0.5 mm corner radius for reliable edge strength Engineered for reliable, continuous turning performance The insert’s GH330 cutting grade, developed by Tungaloy, combines wear resistance with sufficient toughness to maintain a stable cutting edge under varied cutting conditions. The use of a carbide substrate ensures consistent hardness and thermal stability during sustained operations, which contributes to longer tool life and fewer indexings. For production-oriented turning, this results in improved process stability and reduced downtime due to insert changes. The GH330 grade suits a broad range of steels and offers a compromise between abrasive wear protection and resistance to edge chipping. Geometry and compatibility that simplify setup The parallelogram shape with a 55° cutting edge angle and a 0.5 mm corner radius delivers versatile engagement for both finishing and light roughing passes. The insert conforms to ISO dimensions, so compatibility with carriage-mounted holders and boring bars depends on the holder’s form, relief angle (the insert has a 0° relief), tolerance class, clamping method, size and thickness. The insert features a special hole and hole style for dedicated clamping systems, so checking holder and screw compatibility before mounting is recommended. This geometry supports predictable cutting behaviour and straightforward toolpath planning. Chip control and grade selection explained Chip evacuation and surface finish are influenced by the chipbreaker design and how the insert grade interacts with the workpiece material. The KNMX160405 is supplied with a special chipbreaker tailored to targeted chip shapes and controlled evacuation under typical turning conditions. For machinists less familiar with chipbreaker function: the chipbreaker locally alters shear conditions to break and curl chips, reducing entanglement and easing coolant access. Selecting GH330 together with the appropriate chipbreaker balances edge stability and wear performance, improving process reliability when machining a variety of steels. Practical application notes and system components This insert is intended for external and internal turning as part of a system that includes a matching outer holder or boring bar, a shim/clamping set and spare screws. The system approach ensures repeatable clamping and positional accuracy. For initial setup, verify the insert’s orientation and clamping torque specified by the holder manufacturer; incorrect seating can compromise tool life and surface quality. Where high material removal rates or interrupted cuts occur, opt for more robust geometries or adjust feeds and depths to preserve edge integrity. For high-productivity turning with Tungaloy’s GH330 grade, contact Metav Werkzeuge for tailored advice and ordering support by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6805035 Manufacturer SKU: TUN6805035 SKU: 6805035-Tungaloy Model series: ISO turning indexable inserts Designation: KNMX160405 GH330 Material: carbide Brand: Tungaloy Numbers / Core technical data Insert size: 16 mm Cutting angle: 55° Corner radius: 0.5 mm Relief angle: 0° ISO code: 160405 Special features / Versions Parallelogram insert shape Special chipbreaker Special hole style For external and internal turning GH330 Tungaloy grade FAQ What materials can be machined with this insert? The KNMX160405 GH330 insert is designed primarily for turning steels; the GH330 grade provides a balance of wear resistance and toughness suitable for a wide range of steel alloys. How does the parallelogram shape affect cutting? A parallelogram geometry with a 55° edge angle offers versatile engagement, enabling controlled chip flow and suitability for both finishing and light roughing operations on shafts and bores. Is the insert compatible with standard ISO holders? The insert follows ISO dimensions, but compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; check the holder’s specifications and the insert’s special hole style before mounting. What is the purpose of the special chipbreaker? The special chipbreaker design promotes predictable chip formation and evacuation, improving surface finish and reducing the risk of chip entanglement in typical turning operations. Which spare parts are recommended for a complete system? A complete system normally includes a suitable external holder or boring bar, a shim/clamping set and spare screws to ensure repeatable and secure clamping of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
KNMX 160405 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compliance, a robust GH330 grade and precise geometry for consistent turning performance; order through Metav Werkzeuge for reliable supply or consult their specialists for application-specific setup. KNMX160405 GH330 – ISO indexable turning insert for precision turning by Tungaloy A KNMX160405 GH330 indexable insert engineered for external and internal turning, offering a parallelogram form and a 55° cutting angle for versatile machining tasks ISO-standard indexable turning insert GH330 grade for wear and edge stability Parallelogram form with 55° cutting angle Consistent productivity through standardised geometry and compatibility The insert is part of an ISO-standard series designed to simplify tool planning and reduce setup time. Compatibility with a toolholder depends on form, clearance angle, tolerance class, clamping method, size and thickness, which ensures predictable assembly in production tooling systems. The standardised geometry supports fast index changes and consistent repeatability, which helps to maintain cycle times and reduce unplanned downtime. The balanced design of the insert delivers steady chip flow and reliable cutting performance under serial production conditions, promoting process stability. Balanced grade for wear resistance and cutting-edge stability The GH330 cutting grade from Tungaloy combines wear resistance and edge stability, making the insert suitable for a wide range of turning operations. The grade complements the insert geometry to withstand abrasive wear while retaining sufficient toughness for interrupted cuts. A correctly chosen chipbreaker and grade will control chip formation and improve surface finish; the chipbreaker type should be matched to the workpiece material and the machining strategy. This approach reduces rework and increases tool life, delivering economic benefits across batch sizes. Easy integration and clear specification for toolroom use With a parallelogram shape and a nominal cutting angle of 55°, this insert fits common turning applications and toolholder designs. The 0.5 mm corner radius (0.5 mm) allows a compromise between robustness and surface quality, suitable where a defined edge strength is required without sacrificing finish. The system typically comprises the indexable insert, a matching external holder or boring bar, and the necessary shim/clamp set and fixation screws, allowing straightforward retrofitting into existing tool systems and minimising inventory complexity. Application guidance for procurement and process planning Designed for turning operations, the insert supports both external and internal machining and is a practical choice for CNC workshops and precision turning shops seeking a stable cutting edge. Selection should consider the combination of GH330, the intended chipbreaker and the chosen holder to match process stability and workpiece demands. For mixed production environments, the ISO conformity and grade balance make the insert a pragmatic option to harmonise tooling across machines while preserving quality and repeatability. Contact Metav Werkzeuge for application advice and to secure the KNMX160405 GH330 Tungaloy insert for your production setup; technical consultants are available to recommend the correct chipbreaker and holder combination Technical data Article number: 6805033 Manufacturer SKU: TUN6805033 Designation: KNMX160405 GH330 Facts Cutting angle: 55° Corner radius: 0.5 mm Size: 16 mm Clearance angle: 0° Special features Material: cemented carbide Grade: GH330 (Tungaloy) Shape: parallelogram Hole style: special Application: external and internal turning FAQ Which holders are compatible with this insert? Compatibility is determined by the insert form, clearance angle, tolerance class, clamping method and size; the KNMX160405 GH330 indexable turning insert (Tungaloy, SKU 6805033-Tungaloy) requires a holder designed for its parallelogram geometry and 55° cutting angle For which turning tasks is this grade intended? The GH330 grade is formulated to balance wear resistance and edge stability for general turning operations; use the KNMX160405 GH330 insert with a chipbreaker selected for the specific workpiece material and type of cut How does the 0.5 mm corner radius affect the machining result? A 0.5 mm corner radius offers increased edge strength for heavier cuts while still allowing good surface finish; on the KNMX160405 GH330 insert this radius helps to extend tool life in mixed production tasks Can indexable inserts of this type be reground? Indexable carbide inserts such as the KNMX160405 GH330 are designed for indexing and replacement rather than regrinding; replacement provides consistent geometry and cutting-edge integrity What is included when ordering the insert? The KNMX160405 GH330 is supplied as the indexable insert only; matching holders, shims/clamps and fixation screws are purchased separately to complete the tool system Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
KNMX 160405 T9315 Wendeplatten - Tungaloy
Take advantage of the ISO-standard compatibility and the Tungaloy T9315 grade for a resilient cutting edge and predictable wear behaviour; combine a 0.5 mm corner radius and a 55° approach angle for reliable surface finish and process stability. Order through Metav Werkzeuge or consult the team for holder matching and application advice. KNMX 160405 T9315 Parallelogram turning insert, Tungaloy The KNMX 160405 T9315 is an ISO-standard turning insert intended for external and internal turning, engineered to combine a robust Tungaloy grade with a compact parallelogram geometry for stable cutting performance. ISO-standard parallelogram insert Tungaloy T9315 grade for wear resistance 0.5 mm corner radius for controlled finish Suited to external and internal turning Consistent ISO compatibility reduces setup uncertainty The ISO-standard design ensures that the insert fits into established holder systems when form, relief angle, tolerance class, fastening method, size and thickness are matched. This indexed geometry simplifies inventory management and reduces machine downtime because inserts are interchangeable within the ISO family. For production environments seeking predictable tool changes, the standardised form contributes directly to shorter tool-change cycles and improved process reliability. Grade and geometry tailored for balanced edge life and toughness The integrated Tungaloy T9315 grade supplements the insert geometry with a balance of wear resistance, toughness and cutting-edge stability. This composition is intended for general turning tasks where a combination of abrasive wear protection and edge robustness is required. The 0.5 mm corner radius helps to distribute cutting forces, improving surface finish and reducing the risk of edge chipping under moderate interruptions, while the 55° approach angle supports controlled chip flow and accessibility in shoulder or profiling operations. System approach for simple integration and secure fastening The insert functions as part of a system comprising the indexable insert, a compatible external holder or boring bar, a support pad or clamping kit and replacement screws. A special hole style is specified, so compatibility depends on matching clamp hardware or a dedicated screw set; verify holder interface dimensions when planning a tool assembly. This system perspective ensures secure clamping, consistent seat repeatability and easier maintenance of the cutting edge over multiple indexings. Practical selection guidance to improve productivity When selecting an insert of this type, choose a chipbreaker and grade that match the workpiece material, the machining strategy and the setup stiffness; the right chip control reduces heat and improves surface integrity. The parallelogram shape offers flexible orientation for various turning tasks, while the carbide substrate provides the hardness necessary for sustained cutting. For shops aiming to raise throughput with stable results, this insert supports repeatable machining cycles with predictable tool life. Contact Metav Werkzeuge for holder matching and application advice on the Tungaloy KNMX 160405 T9315 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable clamping kits and procurement. Technical Data Manufacturer article number: 6792995 SKU: 6792995-Tungaloy Manufacturer SKU: TUN6792995 Model series: ISO-Drehwendeschneidplatten Core Data Insert size: 16 mm Corner radius: 0.5 mm Approach angle: 55° Rake (relief) angle: 0° Materials and Special Features Grade: T9315 (Tungaloy) Material: Carbide Insert shape: Parallelogram Hole style: Special Application: Turning System components: insert, holder/boring bar, support pad/clamp set, spare screws FAQ What turning operations is this insert intended for? The KNMX 160405 T9315 insert is designed for both external and internal turning operations where a balance of wear resistance and edge stability is required. How does the 0.5 mm corner radius affect the machining result? A 0.5 mm corner radius on this Tungaloy insert helps to distribute cutting forces, supporting a finer surface finish and reducing the likelihood of edge chipping under common turning conditions. Is the insert compatible with standard holders? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; ensure the holder matches the KNMX 160405 geometry and the special hole style before assembly. What benefits does the T9315 grade provide? The T9315 grade complements the insert geometry by offering a combination of wear resistance, toughness and cutting-edge stability suitable for general turning applications. Does the insert come with clamping hardware? The KNMX 160405 T9315 is supplied as the indexable insert; matching clamping kits, pads and screws are part of the complete tool assembly and should be procured to suit the holder interface. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
KNMX 160405 T9315 Wendeplatten - Tungaloy
Take advantage of the combination of Tungaloy T9315 grade, ISO‑standard geometry and a stable 0.5 mm corner radius for consistent turning performance; order the KNMX160405 insert directly via Metav Werkzeuge or consult our advisors for application support. KNMX 160405 T9315 ISO turning insert for turning — Tungaloy A KNMX160405 T9315 indexable insert designed for ISO‑standard turning applications, engineered for reliable edge stability in external and internal turning. Tungaloy T9315 grade for wear resistance ISO‑standard KNMX 160405 geometry Parallelogram shape for stable cutting 0.5 mm corner radius and 55° cutting angle Stable clamping and predictable chip control for efficient machining The parallelogram plate form and 55° main cutting angle combine to provide stable seating in compatible holders, which reduces vibration and improves surface consistency during turning operations. The insert’s 0.5 mm corner radius supports robust engagement at the tool tip, helping to distribute cutting forces and extend edge life. The presence of a special chipbreaker and a special hole style influences chip formation; therefore, selecting the correct holder and tightening method will maintain repeatable clamping and chip evacuation. This results in higher process reliability and fewer unscheduled tool changes. Durable grade balancing wear resistance and edge toughness The Tungaloy T9315 grade enhances the geometry by delivering a balanced mix of wear resistance, toughness and edge stability, which is particularly useful where mixed cutting conditions occur. Manufactured in carbide, the insert is tailored to retain a sharp cutting edge while resisting thermal and mechanical wear during continuous turning. For shops seeking consistent tool life and predictable surface finish, the combination of grade and geometry reduces the necessity for frequent regrinding, thereby supporting productive batch work and tighter process windows. System compatibility and straightforward process planning Compatibility with turning holders follows ISO conventions: the holder must match the insert’s form, clearance angle (0°), tolerance class, fastening method, size and thickness. The ISO code 160405 and the plate size 16 simplify procurement and tooling planning across standard toolholders. Given the insert’s design for both external and internal turning, planning setups becomes more efficient when the correct clamp and screw are used. The insert’s specifications enable shops to standardise inventory and streamline tool changes, contributing to reduced setup times and improved shopfloor throughput. For reliable machining with Tungaloy quality, contact Metav Werkzeuge for tailored advice and order processing at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6792996 Manufacturer SKU: 6792996-Tungaloy Model series: ISO‑Drehwendeschneidplatten Manufacturer: Tungaloy Numbers / Facts ISO code: 160405 Size: 16 Corner radius: 0.5 mm Cutting angle: 55° Clearance angle: 0° Special features Parallelogram plate form Special chipbreaker Special hole and hole style Material: carbide Designed for external and internal turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What turning operations is this insert intended for? This insert is intended for ISO‑standard external and internal turning; the geometry and chipbreaker accommodate common turning tasks when paired with the appropriate holder. How does the T9315 grade affect tool life? The Tungaloy T9315 grade provides a balance of wear resistance and toughness, which improves edge stability and yields more consistent tool life under variable cutting conditions. Which dimensions are important when selecting a holder? Key dimensions are the ISO code 160405, plate size 16, clearance angle 0° and the parallelogram form; matching these with the holder’s form, tolerance class and fastening method ensures correct seating. What is the corner radius and why does it matter? The corner radius is 0.5 mm; this radius helps distribute cutting forces at the tip, improving edge strength and contributing to a better surface finish in many turning applications. Is the chipbreaker standard or customised? This insert features a special chipbreaker and a special hole style, so chip control characteristics differ from standard types and should be matched to the application and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
KNMX 160410 T9315 Wendeplatten - Tungaloy
Delivers stable cutting performance and extended tool life thanks to the T9315 carbide grade and a 1.0 mm corner radius; ISO compatibility simplifies tool changes and reduces setup time. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific guidance. KNMX160410 T9315 KNMX 160410 turning insert, 1.0 mm radius, 55°, Tungaloy The KNMX160410 T9315 is an ISO-standard turning insert developed for external and internal turning applications, combining wear resistance and edge stability for consistent metalcutting performance. Tungaloy T9315 for wear resistance and toughness ISO 160410 form for broad holder compatibility 1.0 mm corner radius for robust edge life Parallelogram shape for versatile chip control Consistent edge stability for reliable production The combination of the T9315 carbide grade and the 1.0 mm corner radius provides wear resistance and increased edge stability, which helps maintain dimensional accuracy over longer tool life. This results in fewer insert changes during production runs and steadier part quality. The insert geometry is optimised for repeatable cutting conditions, so the cutting edge resists chipping under interrupted cuts and moderate vibration, supporting uninterrupted cycle times and predictable maintenance intervals. Designed for straightforward holder compatibility and quick changeovers Compatibility with toolholders is determined by plate form, clearance angle, tolerance class, fastening and thickness; the parallelogram ISO-standard design ensures a secure fit in appropriate holders. The 55° lead angle and 0° clearance (rake) angle behaviour make the insert suitable for a variety of external and internal turning setups. Clear geometry and defined tolerances reduce setup time and make inventory management simpler for production shops using ISO plates across different machines. Process flexibility and informed application choices The insert is intended for turning operations where a balance of toughness and wear performance is required. Selection of the chipbreaker and grade should be matched to the workpiece material and machining parameters to achieve optimal results. The plate’s special bore and chipbreaker variants allow adaptation to different cutting strategies, enabling shops to tune cutting forces and chip flow to improve surface finish or increase metal removal rates where appropriate. System integration and practical handling on the shop floor As part of an ISO plate system, the insert is used together with a matching outer holder, backing plate and clamping set plus replacement screws. The standardised geometry facilitates catalogue-based replacement and easy cross-referencing when planning tool assemblies. Clear labelling and SKU management support traceability and streamline procurement for production environments seeking predictable tool performance and reduced administrative effort. For reliable turning with Tungaloy grade T9315 and proven ISO compatibility, contact Metav Werkzeuge for tailored application advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6792994 SKU (merchant): 6792994-Tungaloy Manufacturer SKU: TUN6792994 Model series: ISO turning indexable inserts Label: KNMX160410 T9315 Tungaloy-Wendeplatte Core data Size: 16 mm Thickness: 4.76 mm Corner radius: 1.0 mm Clearance angle: 0° Lead angle: 55° ISO code: 160410 Special features Parallelogram plate form Special bore Special bore style Special chipbreaker Tungaloy grade T9315 Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness Intended application: turning Material: carbide FAQ Which turning operations suit this insert best? The insert is designed for external and internal turning; choose the chipbreaker and cutting parameters appropriate for the workpiece to exploit the KNMX160410 T9315’s wear resistance and edge stability. How is compatibility with a toolholder verified? Compatibility is checked by plate form, clearance angle, tolerance class, fastening, size and thickness; ensure the holder accepts the KNMX 160410 form and the plate thickness of 4.76 mm. What performance characteristics does the T9315 grade deliver? Tungaloy’s T9315 grade combines wear resistance and toughness to provide stable cutting edges and reliable performance under typical turning conditions for indexable inserts. What are the SKU and manufacturer article number for ordering? Use SKU 6792994-Tungaloy or manufacturer article number 6792994 when ordering the KNMX160410 T9315 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
KNMX 160410 T9315 Wendeplatten - Tungaloy
High wear resistance and a stable cutting edge position the KNMX160410 T9315 as a reliable choice for productive turning operations. The ISO-standard geometry combined with a 1.0 mm corner radius and parallelogram form delivers repeatable chip control and secure clamping. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. KNMX 160410 T9315 – Tungaloy indexable turning insert (ISO 160410), 1.0 mm radius The KNMX160410 T9315 is an ISO-standard indexable turning insert intended for external and internal turning, offering robust edge stability and adaptable chip control in standard holder systems ISO-standard indexable insert, parallelogram shape Tungaloy T9315 grade for wear resistance 1.0 mm corner radius for robust edge strength Suitable for external and internal turning Deliverable performance through a wear‑resistant grade The KNMX160410 T9315 pairs a Tungaloy carbide grade with an ISO-conform geometry to provide consistent tool life and predictable performance. The applied grade focuses on a balance of wear resistance and edge toughness, which reduces downtime from frequent insert changes and supports higher productivity on stable setups. For customers seeking measurable returns, the combination of material and geometry contributes to longer operating periods between indexings and more uniform part quality. Seamless integration with ISO holders for reliable clamping Compatibility with standard toolholders is determined by form, clearance angle, tolerance class, clamping method, size and thickness; the insert’s parallelogram form and 55° approach angle enable secure mounting and accessible indexing. The 0° clearance angle and defined 1.0 mm corner radius improve bulk‑material contact distribution, helping to maintain surface finish while protecting the cutting edge under moderate interruptions. Clear geometric standards make tool replacement straightforward and reduce setup variability in batch production. Choice guidance and application relevance for turning tasks Selection of chipbreaker and grade should follow the workpiece material, machining parameters and machine stability; the T9315 grade is intended to complement the insert geometry by offering a compromise between toughness and abrasion resistance. Where interrupted cuts or mixed materials are frequent, the emphasis on edge stability helps avoid catastrophic edge failure. For fine finishing passes, the stable geometry supports consistent surface quality, while coarser passes benefit from the robust edge strength; match the chipbreaker type to the material and desired chip form for best results. For machining enquiries or availability of Tungaloy inserts, contact Metav Werkzeuge for tailored application advice or to request stock information at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6792997 Manufacturer SKU: TUN6792997 SKU: 6792997-Tungaloy Series: ISO indexable turning inserts Designation: KNMX160410 Facts Shape: Parallelogram ISO code: 160410 Grade: T9315 Corner radius: 1.0 mm Approach angle: 55° Clearance angle: 0° Hole type: special Hole style: special Size: 16 Special features Material: cemented carbide Application: turning (external and internal) Chipbreaker: special Compatibility: ISO holders by form, clearance, tolerance, clamping, size, thickness System assembly: ISO insert with matching outer holder, shim/clamp set and replacement screws FAQ What materials is this insert suitable for? The KNMX160410 T9315 insert is designed for general turning tasks; the Tungaloy T9315 grade provides a balance of wear resistance and toughness suitable across a broad range of typical turning materials when the correct chipbreaker is selected. How does the 1.0 mm corner radius affect machining results? A 1.0 mm corner radius on the KNMX160410 improves edge strength and helps maintain surface finish under moderate load, reducing the risk of edge chipping compared with very small radii. Is the insert compatible with standard ISO holders? Yes, compatibility depends on matching the insert form, clearance angle, tolerance class, clamping method, size and thickness; the KNMX160410 is manufactured to ISO specification for integration into compatible holders. What is the meaning of the T9315 grade? T9315 denotes a Tungaloy carbide composition optimised to combine wear resistance and edge stability, chosen to complement the insert geometry for productive turning. Which chipbreaker should be used with this insert? The chipbreaker must be chosen according to the workpiece material and machining conditions; the KNMX160410 is supplied with a special chipbreaker designation—select the variant that matches material and desired chip form. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
LNGU 0303ZE AH8005 Wendeplatten - Tungaloy
Benefit from a productive combination of high-feed milling capability, a wear-resistant AH8005 PVD-coated carbide grade and a stable chip control geometry for reliable, long-running machining. Order the insert directly via Metav Werkzeuge or consult the company's advisors for application-specific recommendations. LNGU 0303ZE AH8005 indexable insert for milling — Tungaloy LNGU0303ZER-MH AH8005 indexable insert engineered for high-feed milling, pocketing and face milling with small axial depths and large material removal rates High-feed milling family PVD-coated carbide AH8005 Suitable for heat-resistant alloys Rectangular 03 form, 3.18 mm thick Productivity gains from the DoFeed concept The DoFeed series is designed to maximise material removal per unit time with small axial engagements. This insert, belonging to that family, uses a geometry optimised for high-feed milling which translates into higher throughput while keeping axial forces low. The combination of the series concept and the PVD-coated carbide grade AH8005 permits stable cutting when machining demanding materials, meaning fewer interruptions for tool changes and a smoother production flow. The design focuses on measurable productivity rather than vague promises, offering a clear path to reduced cycle times. Secure seating and consistent chip control for stable results The insert features a cylindrical hole with double-sided countersink (40°–60°) and a chipbreaker MH geometry that together ensure secure clamping and improved chip evacuation. The rectangular 03 format, with a plate thickness of 3.18 mm, gives predictable rigidity in the tool pocket and reduces the risk of micro-movements that can degrade surface finish. The low relief angle (0°) and the 90° seating angle support repeatable positioning in compatible cutter bodies, resulting in consistent component accuracy across batches. Material scope and economic edge of AH8005 grade The AH8005 cutting grade has been specified as a wear-resistant, PVD-coated carbide suitable for heat-resistant alloys and other hard-to-machine materials. This makes the insert particularly effective for pocketing and face operations in aerospace alloys and high-temperature steels where flank wear and edge stability are critical. By reducing flank wear and maintaining a reliable cutting edge, the insert contributes to longer tool life and fewer indexing operations, which lowers per-part tooling costs and improves overall process economy. For productivity-driven milling applications, trust the Tungaloy AH8005 indexable insert and contact Metav Werkzeuge for tailored application advice and prompt supply of compatible DoFeed bodies and fixing screws. Technical data Article number: 6756098 SKU: 6756098-Tungaloy Manufacturer SKU: TUN6756098 Brand: Tungaloy Facts Plate thickness: 3.18 mm Seating angle: 90° Free angle (relief): 0° Size: 03 Special features PVD-coated carbide grade AH8005 Chipbreaker type MH Rectangular plate shape Cylindrical hole with double-sided countersink (40°–60°) Part of DoFeed high-feed milling family Intended for milling, pocketing and face milling Suitable for heat-resistant alloys and hard materials FAQ What is the primary application of this insert? The LNGU0303ZER-MH AH8005 indexable insert is intended for high-feed milling operations, including pocketing and face milling where large time‑material removal volumes are required with small axial depths. Which materials can be machined with this grade? The AH8005 PVD‑coated carbide grade is specified for wear resistance and is suitable for heat‑resistant alloys and hard materials encountered in demanding milling tasks. How does the chipbreaker MH improve performance? The MH chipbreaker promotes controlled chip formation and evacuation, reducing chatter and improving surface finish during high‑feed milling passes. Why is the hole style important for mounting? The cylindrical hole with a double‑sided countersink (40°–60°) provides a stable seating and positive clamping interface, ensuring repeatable positioning and secure retention under high radial loads. Is this insert compatible with DoFeed milling bodies? Yes, the insert is part of the DoFeed model series and is supplied as a system component alongside matching indexable plates and fixing screws for dedicated DoFeed cutter bodies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com