EPGT 040104 SH730 Wendeplatten - Tungaloy
Benefit from the combination of SH730 coated carbide, a 0.4 mm corner radius and proven ISO compatibility for steady turning performance; order the insert directly via Metav Werkzeuge or ask the consultants for application guidance. EPGT 040104 SH730 — Turning indexable insert by Tungaloy EPGT040104 SH730 is an ISO rhombic turning insert designed for reliable external and internal turning where edge stability and repeatable clamping are required. *SH730 coated carbide for tough cutting conditions *Rhombic ISO insert, 75° cutting edge angle *0.4 mm corner radius for versatile finishing *Cylindrical hole with single-sided countersink Consistent edge stability for variable engagement The SH730 grade is a coated carbide developed for stable cutting-edge performance, particularly suited to smaller tooling and changing engagement conditions. This provides a clear production advantage: consistent chip formation under varying depths of cut leads to fewer interruptions and longer effective tool life. Specified as an ISO rhombic insert, the geometry supports predictable cutting behaviour and aids toolpath planning in turning operations. Secure clamping and process repeatability The insert’s ISO conformity and precise geometry ensure compatibility with matched holders when form, clearance, tolerance class, clamping method, size and thickness are observed. The cylindrical hole with one-sided countersink (40°–60°) and a plate thickness of 1.59 mm contribute to a tight mechanical fit, reducing vibration and improving repeatability. As a result, set-up times are reduced and process stability is increased in batch production. Geometry tuned for finishing and general turning A 75° cutting edge angle combined with a 0.4 mm corner radius makes this insert well suited to both light finishing passes and general turning tasks where surface quality matters. The 11° clearance helps prevent rubbing while preserving edge strength. The one-sided chipbreaker assists chip control in many operations, improving swarf evacuation and reducing the risk of built-up edge during continuous cuts. Practical system integration and selection advice The component is part of an ISO insert system including the matching external holder or boring bar, suitable shim or clamping kit and replacement screws. Selecting the correct chipbreaker and the SH730 grade for the workpiece and machining strategy will maximise productivity and consistency. For applications with changing engagement or smaller tools, the insert’s combination of grade and geometry delivers reliable performance with straightforward tool management. For detailed application advice on Tungaloy turning inserts, matching holders or to request suitable alternatives, contact Metav Werkzeuge for technical consultation by email or phone. Technical data Manufacturer article number: 6862158 SKU: 6862158-Tungaloy Manufacturer SKU: TUN6862158 Model series: ISO-Drehwendeschneidplatten Core data Cutting edge angle: 75° Corner radius: 0.4 mm Clearance angle: 11° Thickness: 1.59 mm Size: 04 Special features Grade/coating: SH730 Material: carbide Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Rhombic insert geometry ISO designation: EPGT040104 FAQ What applications suit this insert best? The EPGT040104 SH730 Tungaloy turning insert is intended for external and internal turning where stable cutting edges and predictable chip control are required, particularly with smaller tools or variable engagement. How does the SH730 grade affect tool life? The SH730 coated carbide grade offers enhanced edge stability under changing cutting conditions; this typically results in more consistent wear behaviour for the EPGT040104 SH730 insert and longer productive intervals between indexings. Which holder characteristics are important for compatibility? Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; the ISO rhombic form and 1.59 mm plate thickness of the EPGT040104 SH730 insert should be matched to the holder specifications. Does the insert provide good chip control? Yes. The one-sided chipbreaker combined with the insert geometry supports controlled chip formation for many turning operations when using the EPGT040104 SH730 insert. What does the hole style mean for mounting? The cylindrical hole with a single-sided countersink (40°–60°) on the EPGT040104 SH730 insert ensures reliable clamping and alignment in compatible toolholders, improving mechanical stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040104 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH730, a rhombic geometry and a secure cylindrical hole with countersink to ensure stable cutting edges and reliable mounting; order the EPGT040104 SH730 turning insert directly via Metav Werkzeuge or ask our consultants if needed. EPGT040104 SH730 ISO turning insert by Tungaloy — rhombic, 11° clearance, with hole The EPGT040104 SH730 is an ISO-compliant rhombic indexable turning insert designed for external and internal turning applications, optimised for small tools and varying engagement conditions. ISO-compliant rhombic insert, size 04 Coated carbide grade SH730 for stable edges 11° clearance angle for versatile turning Cylindrical hole with 40°–60° countersink Consistent cutting performance for mixed cutting conditions The coated carbide SH730 grade delivers a tough, edge-stable substrate that maintains cutting integrity even under fluctuating engagement and smaller tool geometries. The coating and substrate combination reduces premature edge breakdown and supports stable chip formation, which in turn extends effective tool life and reduces unscheduled insert changes. For machining operations where repeatable surface quality and predictable tool behaviour are required, this insert provides a measurable improvement in process stability. Faster set-up and secure clamping for productive turning As an ISO-compliant insert, compatibility with a wide range of holders is determined by geometry, clearance angle, tolerance class, fastening and thickness — factors that simplify tool selection and reduce set-up time on the shop floor. The cylindrical hole with single-sided countersink (40°–60°) enables secure, repeatable clamping and straightforward replacement, while the rhombic shape gives access to multiple effective cutting edges. The resulting reduction in machine downtime supports higher throughput and improved process reliability. Clear specifications that support precise application planning Key dimensions and geometry are designed to support predictable performance: a 0.4 mm nose radius, a plate thickness of 1.59 mm, and a 11° clearance angle together define the cutting footprint and rigidity. The single-sided chipbreaker aids evacuation and is most effective when selected to match workpiece material and cutting parameters. The ISO designation and standardised size facilitate stock management and interchangeability across tool systems, allowing production planners to rely on consistent insert data when programming and setting up turning operations. For reliable turning performance with Tungaloy quality, contact Metav Werkzeuge for ordering and technical advice — info@metav-werkzeuge.com, +49 2822 7131930. Technical data Article number: 6862197 Seller SKU: 6862197-Tungaloy Manufacturer SKU: TUN6862197 Facts Radius: 0.4 mm Clearance angle: 11° Lead/approach angle: 75° Thickness: 1.59 mm Size: 04 Special features Coated carbide grade SH730 Rhombic plate shape One-sided chipbreaker With cylindrical hole + single-sided countersink (40°–60°) ISO turning insert series Application: Turning (external & internal) FAQ What cutting tasks is this insert intended for? The EPGT040104 SH730 indexable insert by Tungaloy is intended for external and internal turning, especially where small-tool geometries or changing engagement conditions demand a tough, edge-stable coated carbide. How is the insert mounted in a holder? Mounting uses the cylindrical hole with a single-sided countersink (40°–60°); compatibility with the holder depends on form, clearance angle, tolerance class, fastening, size and thickness — details reflected in the EPGT040104 SH730 data sheet (SKU 6862197-Tungaloy). Which geometric values should be considered when planning a cut? Important values include the 0.4 mm nose radius, 1.59 mm plate thickness, 11° clearance angle and the rhombic plate shape; these determine cutting footprint, stiffness and recommended cutting parameters for the EPGT insert. Is this an ISO-standardised insert? Yes — the insert is part of the ISO turning insert series and follows standardised dimensions and designations to ensure interchangeability across compliant holders. What are the main advantages of the SH730 grade? The SH730 coated carbide grade is formulated for stable cutting edges and reliable chip control under variable engagement; it is particularly suitable for smaller tools and situations where consistent edge life is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040104 TH10 Wendeplatten - Tungaloy
The combination of ISO‑standard geometry, a sharp TH10 uncoated carbide grade and a 0.4 mm corner radius delivers low cutting forces and consistent surface quality in turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for compatibility and supply. EPGT 040104 TH10 – ISO turning indexable insert, uncoated carbide by Tungaloy EPGT 040104 TH10 is an ISO‑compatible indexable insert for turning, designed for external and internal operations where low cutting forces and clean surfaces are required ISO‑standard rhombic 04 geometry Uncoated carbide grade TH10 0.4 mm corner radius for fine finishes Cylindrical hole with single‑side countersink High process reliability through standardised geometry The insert is manufactured to ISO‑standard dimensions with a rhombic 04 form, ensuring predictable seating and repeatable clamping. This standardisation reduces set‑up time and minimises the risk of misalignment when changing inserts, so a stable process can be maintained across different holders. The result is a measurable improvement in cycle reliability and less downtime for re‑fixturing. Optimised cutting behaviour for non‑ferrous materials With an uncoated carbide composition and the TH10 sharp universal grade, the design promotes low cutting forces and a clean surface finish on non‑ferrous workpieces. The reduced tendency for built‑up edge and the inherently sharp cutting edge are particularly beneficial for machining softer alloys and mixed‑material batches, where minimal burr formation and consistent part quality are priorities. Secure clamping and versatile seat features The insert features a cylindrical hole with a single‑side countersink (40°–60°) combined with an 11° clearance angle and 1.59 mm thickness, giving a secure and repeatable seat in compatible holders. The geometry supports stable contact under varying cutting forces and simplifies replacement, thereby lowering tool change time and supporting higher machine utilisation. Practical handling and application advice A 0.4 mm corner radius balances edge strength with the capability to produce fine surface finishes; it is well suited to finishing and light to medium turning tasks. The component is intended for use in ISO‑standard turning assemblies, comprising a matching external holder or boring bar, appropriate shim/clamp set and fastening screws. If additional specification details are required, Metav Werkzeuge’s technical staff can provide compatibility checks and machining recommendations by email or phone. Contact Metav Werkzeuge for tailored advice on Tungaloy turning inserts, availability and holder compatibility — info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 6850608 Manufacturer SKU: TUN6850608 SKU (retailer): 6850608-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: carbide Designation: EPGT040104 TH10 Application: turning Shape: rhombic Thickness: 1.59 mm Clearance angle: 11° Corner radius: 0.4 mm Size: 04 Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Insert angle: 75° Facts Thickness: 1.59 mm Corner radius: 0.4 mm Clearance angle: 11° Insert size: 04 Countersink range: 40°–60° Insert angle: 75° Special features Uncoated carbide grade TH10 Sharp universal grade for non‑ferrous materials Single‑side chipbreaker ISO‑compatible seating for secure clamping Rhombic 04 form for external and internal turning Cylindrical hole with single‑side countersink for positive locating FAQ Which materials are best machined with the EPGT 040104 TH10 insert? The EPGT 040104 TH10 insert is optimised for non‑ferrous materials and applications that benefit from a sharp, uncoated cutting edge; the TH10 grade supports low cutting forces and clean surfaces. Is the insert compatible with standard ISO turning holders? Yes, the insert follows ISO dimensions for the rhombic 04 form and is compatible with holders that match the form, clearance angle, thickness and fastening style specified for the insert. What is the purpose of the single‑side countersink on the hole? The cylindrical hole with a single‑side countersink (40°–60°) provides a defined seating face for positive locating and repeatable clamping, improving stability during turning cuts. Can the EPGT 040104 TH10 be used for roughing operations? The insert’s sharp uncoated edge and 0.4 mm radius are primarily intended for finishing and light to medium turns; for heavy roughing, a larger radius or a coated grade might be preferable. How does the uncoated carbide behave regarding built‑up edge? The uncoated carbide TH10 reduces cutting forces and tends to produce less built‑up edge on non‑ferrous alloys, supporting better surface quality in finish operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGT 040104 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO compatibility, sharp TH10 uncoated carbide grade and compact rhombic geometry to achieve low cutting forces and consistent surface quality in turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for grade and chipbreaker selection. EPGT 040104 TH10 – Tungaloy indexable insert for turning (rhombic, 75°) The EPGT040104 TH10 is an ISO‑format indexable insert for external and internal turning, designed to deliver low cutting forces and clean surfaces on non‑ferrous materials. ISO rhombic insert EPGT 040104, 75° cutting angle Uncoated carbide TH10 for low cutting forces Single-sided chipbreaker for clean surface finish Cylindrical hole + 40°–60° countersink for secure clamping Consistent turning with a sharp uncoated grade The TH10 uncoated carbide grade is specified for applications where a sharp cutting edge reduces cutting forces and promotes clean surface finish when machining non‑ferrous workpieces. The uncoated edge lowers friction at the cutting zone, which can translate into reduced power demand and more stable process behaviour when cutting softer alloys. As an ISO‑standard insert, the component supports predictable interchangeability across compatible holders, simplifying tool inventory and replacement procedures while maintaining process repeatability. Geometry that balances finish and stability The rhombic form with a 75° included angle and a 0.4 mm nose radius is engineered to offer a compromise between edge strength and surface quality: the modest nose radius helps achieve fine finishes while preserving adequate edge resilience for routine turning tasks. The insert features an 11° relief (clearance) angle and a plate thickness of 1.59 mm, which together contribute to stable seating in the toolholder and consistent cutting engagement. The presence of a cylindrical hole with a one‑sided countersink (40°–60°) ensures reliable clamping and precise location when mounted in the correct ISO‑format holder. System approach and practical application guidance This insert is intended for turning — both external and internal operations — and should be used as part of a matched system comprising an appropriate external holder or boring bar, shim/clamp set and replacement screws. Selection of the single‑sided chipbreaker should be matched to the workpiece material and the required machining stability: choose a chipbreaker that promotes chip control for the given cut depth and feed rate. Where quieter cutting and a cleaner surface are priorities, the TH10 uncoated grade is a practical choice for many non‑ferrous applications; for different materials or higher thermal loads, a coated grade may be considered instead. For detailed application advice or to order genuine Tungaloy EPGT040104 TH10 indexable inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6804321 Manufacturer SKU: TUN6804321 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Name: EPGT040104 TH10 Facts Included angle: 75° Nose radius: 0.4 mm Relief (clearance) angle: 11° Plate thickness: 1.59 mm Plate size: 04 Design / Special features Carbide material, uncoated (TH10) Rhombic plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO‑format insert for external and internal turning Compatible with matching external holder or boring bar, shim/clamp set and replacement screws FAQ Which materials is this insert best suited for? The EPGT040104 TH10 is tuned for non‑ferrous materials; the TH10 uncoated carbide grade supports lower cutting forces and yields cleaner surface finishes when machining such alloys. How is compatibility with toolholders ensured? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; the EPGT040104 format requires a holder designed for ISO rhombic 04 inserts with a 75° included angle. What does the 0.4 mm nose radius mean for part finish and edge life? A 0.4 mm nose radius offers a balance between surface finish and edge strength: it helps produce finer surface quality than a larger radius while still providing reasonable resistance to breakage under normal turning conditions. Can the insert be used for internal turning operations? Yes; the insert is specified for both external and internal turning, provided an appropriate boring bar or internal holder with sufficient clearance and correct seating is used. Is the insert coated? No — the EPGT040104 TH10 is an uncoated carbide insert (TH10 grade), chosen for applications where a sharp, uncoated edge is advantageous. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
EPGT 040104 UX30 Wendeplatten - Tungaloy
Take advantage of the combination of an ISO‑compliant rhombic form, the UX30 uncoated carbide grade and a 0.4 mm corner radius for stable chip control and low cutting forces; order the insert directly via Metav Werkzeuge or consult the advisers for holder compatibility and immediate availability. EPGT040104 EPGT 040104 UX30 turning insert, 0.4 mm radius, 11° clearance — Tungaloy The EPGT040104 is an ISO‑conforming rhombic turning insert designed for external and internal turning applications where low cutting forces and reliable chip formation are priorities. ISO-conforming rhombic insert 04 UX30 uncoated carbide, sharp cutting edge 0.4 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Controlled chip formation for consistent cycle times The UX30 grade of uncoated carbide is specified for operations that demand low cutting forces and good chip formation. In practice, this means fewer interrupted cuts, reduced tendency to chatter and a more predictable material flow at the cut face, which supports repeatable component quality. The ISO designation ensures interchangeability with holders matching the pin and clamp geometry, allowing shops to standardise tooling and reduce set‑up variance. Geometry and hole design that assist surface finish and clamping The rhombic plate form, combined with a 0.4 mm corner radius and 11° clearance, is aimed at light finishing and precise turning passes. The modest corner radius reduces tool deflection and helps to produce a finer surface finish on turned parts, while the clearance angle limits rubbing at the flank. The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) to match common clamping systems; the 1.59 mm thickness supports reliable clamping without excessive overhang. A one‑sided chipbreaker further aids controlled chip breakage during interrupted or steady cuts. Production integration, holder compatibility and application advice Compatibility with a chosen holder is determined by insert form, clearance angle, tolerance class, fastening type, size and thickness. The insert fits into standard ISO turning systems and can be combined with suitable external holders or boring bars for internal machining. For shops seeking predictable productivity, the grade and single‑sided chipbreaker recommend this insert for operations where chip control and low force cutting reduce rework and extend downstream process stability. Technical enquiries and holder fitment checks can be handled by Metav Werkzeuge; specifications and drawings are available on request at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Choose the Tungaloy UX30 grade for controlled chip formation and contact Metav Werkzeuge for tailored holder compatibility and prompt supply of the EPGT040104 insert Technical Data Article number: 6804322 SKU: 6804322-Tungaloy Manufacturer SKU: TUN6804322 ISO designation: EPGT040104 Model series: ISO turning inserts Material: carbide Grade: UX30 Facts Corner radius: 0.4 mm Clearance angle: 11° Included angle: 75° Thickness: 1.59 mm Size: 04 Special features Rhombic insert form One‑sided chipbreaker Cylindrical hole with one‑sided countersink (40°–60°) Sharp cutting edge for low cutting forces Suitable for external and internal turning Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ Which turning tasks suit this insert best? The EPGT040104 UX30 turning insert is best for external and internal turning operations that prioritise low cutting forces and controlled chip formation. What materials work well with the UX30 grade? The UX30 uncoated carbide grade performs well where low cutting forces and reliable chip control are required; it is a versatile choice for a broad range of turning tasks where those characteristics are key. How does the 0.4 mm corner radius influence the surface finish? A 0.4 mm radius offers a balance between edge strength and finish quality, providing fine finishing capability while limiting deflection during light cuts with the EPGT040104 insert. What should be checked for holder compatibility? Check the holder for matching insert form, clearance angle, tolerance class, fastening method, size and thickness to ensure correct fit and clamping for this insert. What is the product code or SKU for ordering? The insert is listed as EPGT040104 UX30 (SKU 6804322-Tungaloy; manufacturer SKU TUN6804322). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGW 040102 DX140 Wendeplatten - Tungaloy
Take advantage of the combination of polycrystalline diamond (PCD) cutting edge, ISO compatibility and a slim, 1.59 mm plate thickness for high-speed, low-wear turning of aluminium and non-ferrous materials; order directly via Metav Werkzeuge or ask their consultants for application support. EPGW040102-DIA DX140 ISO turning insert (PCD) by Tungaloy — rhombic 04, 11° clearance EPGW040102-DIA DX140 is an ISO‑standard rhombic turning insert tailored for high‑speed machining of aluminium, non‑ferrous metals and abrasive non‑metal materials. Polycrystalline diamond cutting edge for long life ISO rhombic 04 format for wide holder compatibility 11° clearance angle for positive cutting action Cylindrical hole with one-side countersink (40°–60°) High-speed performance with long tool life The insert is equipped with a polycrystalline diamond (PCD) cutting edge that delivers exceptional wear resistance in abrasive and non-ferrous workpieces. PCD is a sintered, diamond-based cutting material that maintains a sharp geometry far longer than conventional coatings, which translates into fewer indexings and longer uninterrupted production runs. For operations where surface finish and repeatability matter, the combination of DX140 grade and a carbide substrate ensures consistent results at elevated cutting speeds while reducing downtime for tool changes. ISO conformity and straightforward clamping for reliable cycles Manufactured to ISO dimensions and tolerances, the plate is designed to fit standard rhombic holders where compatibility is determined by shape, clearance angle, tolerance class, fastening method, size and thickness. The insert’s cylindrical hole with a one‑side countersink (40°–60°) enables secure mounting and precise seat location, minimising vibration and improving process stability. The ISO standardisation simplifies tool selection and replacement across multiple machines and fixtures, ensuring quick setup and reproducible part quality. Geometry that improves chip control and surface integrity The rhombic geometry and DIA chipbreaker promote controlled chip formation when machining ductile non-ferrous alloys and abrasive composites. A 0.2 mm corner radius helps to balance edge strength with a fine surface finish, while the 11° clearance reduces rubbing at the flank and lowers cutting forces. The slim 1.59 mm plate thickness together with the insert’s 75° cutting angle supports accurate dimensional control on fine external and internal turning operations, improving first-pass yield and part conformity. Substrate and application guidance for process optimisation Beneath the PCD layer the insert uses a carbide substrate, providing the toughness required for intermittent cuts and slight deflections while the diamond cutting edge resists abrasive wear. The grade is targeted at aluminium, other non‑ferrous metals and abrasive non‑metallic materials, permitting elevated speeds and long tool life where traditional carbide or coated inserts would wear rapidly. For best results, pair the insert with a rigid holder and appropriate coolant strategy, and choose the chipbreaker and grade based on workpiece stability and surface finish requirements. Contact Metav Werkzeuge for availability and tailored machining advice on the Tungaloy DX140 PCD insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6821478 SKU: 6821478-Tungaloy Manufacturer SKU: TUN6821478 Designation: EPGW040102-DIA DX140 Series: ISO turning inserts Facts Radius: 0.2 mm Clearance angle: 11° Thickness: 1.59 mm Insert size: 04 Cutting edge angle: 75° Manufacturer article number: 6821478 Special features Cutting material: polycrystalline diamond (PCD) Substrate: Hartmetall (carbide) Shape: rhombic Chipbreaker: DIA Hole: cylindrical hole with one-side countersink 40°–60° Application: Turning; suitable for aluminium, non‑ferrous metals and abrasive non‑metals ISO designation: EPGW040102-DIA FAQ Which materials is this insert best suited for? The EPGW040102-DIA DX140 insert by Tungaloy is optimised for aluminium, other non‑ferrous metals and abrasive non‑metallic materials, where the PCD cutting edge provides long life. What are the benefits of PCD for turning? Polycrystalline diamond offers superior wear resistance and sharpness retention compared with conventional carbide or coated tools, so the Tungaloy DX140 insert maintains surface finish and tool life at high cutting speeds. How is the insert secured in the holder? The insert features a cylindrical hole with a one‑side countersink (40°–60°); compatibility with the holder depends on shape, free angle, tolerance class, fastening and size to ensure a stable seat. Can this insert be used for internal as well as external turning? Yes, the ISO rhombic format and geometry are suitable for both external and internal turning operations when paired with the correct holder and tool overhang conditions. What setup considerations improve performance with this insert? Use a rigid holder, minimise tool overhang and select chipformer and grade according to workpiece stability; the carbide substrate beneath the PCD edge tolerates slight interruptions while the diamond layer resists abrasive wear. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
EPGW 040104 DX140 Wendeplatten - Tungaloy
Combining the PCD DX140 cutting material with an ISO rhombic 04 format and a 75° geometry gives high cutting speeds and extended tool life; order the insert directly via Metav Werkzeuge or ask our consultants for tailored advice and availability. EPGW 040104 DX140 turning insert (PCD) for turning – Tungaloy The EPGW 040104 DX140 is an ISO‑format rhombic turning insert with a polycrystalline diamond cutting edge, engineered for high‑speed machining of aluminium, non‑ferrous metals and abrasive non‑metallic materials. PCD grade DX140 for long tool life ISO rhombic 04 profile, 75° cutting angle Optimised for aluminium and non‑ferrous work Cylindrical hole with single‑side countersink Exceptional productivity from polycrystalline diamond technology The insert combines a polycrystalline diamond (PCD) cutting edge with a robust carbide body, enabling substantially higher cutting speeds and markedly longer tool life compared with conventional carbide inserts when machining non‑ferrous materials. DX140 is formulated to maintain edge stability under continuous high‑speed conditions, reducing regrind frequency and lowering cost per part. For components where surface finish and cycle time are critical, this insert supports sustained productivity and predictable tool change intervals. Stable set‑up and interchangeability with ISO rhombic geometry The ISO rhombic 04 format and a 75° approach angle provide predictable cutting forces and easy access for a wide range of turning tasks. Compatibility with holders is determined by form, 11° relief angle, tolerance class, fastening method, size and thickness; the insert has a thickness of 1.59 mm and a corner radius of 0.4 mm, with a cylindrical hole plus single‑side countersink (40°–60°) for secure clamping and accurate indexing. These dimensional details help engineers select the correct tooling combination to achieve repeatable results and reduce set‑up time. Application benefits, system composition and recommended use Designed primarily for turning, the insert performs best on aluminium, other non‑ferrous alloys and certain abrasive non‑metallic materials where PCD excels. The DIA chipbreaker geometry assists controlled chip formation; selection of chipbreaker and grade should match the workpiece material, machining method and machine stability to maximise life and surface quality. A complete tooling system comprises the ISO insert, a matching external holder or boring bar, a shim/clamp set and replacement screws, all contributing to a secure assembly that minimises vibration and improves dimensional accuracy. For technical selection and fast procurement of Tungaloy turning inserts such as the EPGW 040104 DX140, contact Metav Werkzeuge for expert advice and stock information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6821479 SKU: 6821479-Tungaloy Manufacturer SKU: TUN6821479 Model series: ISO‑turning inserts Designation: EPGW040104‑DIA Core data Size: 04 Cutting angle: 75° Relief angle: 11° Thickness: 1.59 mm Corner radius: 0.4 mm Countersink: 40°–60° Materials & features Cutting material: Polycrystalline diamond (PCD) Substrate: Carbide Chipbreaker: DIA Insert shape: ISO rhombic Hole style: Cylindrical hole with single‑side countersink Application: Turning FAQ Which materials are best machined with this insert? The EPGW 040104 DX140 turning insert is intended for aluminium, other non‑ferrous alloys and certain abrasive non‑metallic materials, where the PCD DX140 grade offers long life and excellent surface finish. Can the insert be used at high cutting speeds? Yes — the polycrystalline diamond cutting edge in the DX140 grade is optimised for high cutting speeds, delivering extended tool life and stable performance during sustained machining. How is holder compatibility determined? Compatibility depends on the insert form, relief angle, tolerance class, fastening, size and thickness; the rhombic 04 format, 11° relief and 1.59 mm thickness must match the chosen holder or boring bar to ensure secure clamping and accurate positioning. What chipbreaker should be selected for this insert? This insert features a DIA chipbreaker; the final choice of chipbreaker geometry and grade should correspond to the workpiece material, operation (roughing or finishing) and machine stability to ensure optimal chip control. What components make up the complete tooling system? A typical system includes the ISO insert, a compatible external holder or boring bar, a shim/clamp set and replacement screws; these elements together ensure correct seat, clamping and repeatable indexing for turning operations. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
FNMG 110402 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated carbide grade (AH6225), a stable TSF chipbreaker, and ISO compatibility to keep turning operations consistent and productive; order directly via Metav Werkzeuge or consult our specialists for application advice. FNMG 110402 AH6225 rhombic indexable turning insert, PVD‑coated carbide, for turning — Tungaloy The FNMG110402E-TSF AH6225 is an ISO‑standard rhombic insert designed for external and internal turning, engineered to deliver a sharp yet robust cutting edge for medium machining of stainless steels. PVD-coated carbide grade AH6225 TSF chipbreaker for controlled chip formation ISO FNMG 110402 rhombic insert, cylindrical hole 0° clearance and 50° cutting approach angle Consistent edge life with PVD-coated carbide for stainless steels The combination of a PVD‑coated carbide substrate and the AH6225 grade provides a reliable balance between edge sharpness and toughness, which is particularly beneficial when machining stainless steels under variable cutting conditions. The coating reduces adhesion and thermal wear, so the insert maintains a consistent edge for longer tool cycles. This technical composition reduces unplanned interruptions and supports predictable batch processing, improving overall machining throughput. Predictable chip control for improved surface finish Equipped with the TSF chipbreaker, the insert promotes short, controllable chips that evacuate cleanly from the cut, reducing the risk of surface damage and tool interference. Controlled chip formation leads directly to a superior surface finish and stabilised cutting forces, which in turn lowers the risk of chatter and rework. For operations where part integrity and repeatability matter, the chip control mechanism contributes to fewer rejects and steadier cycle times. ISO FNMG form for straightforward holder compatibility The insert follows the ISO FNMG 110402 form and fits holders specified for this geometry; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. With a rhombic profile, cylindrical hole and a corner radius of 0.2 mm, installation is clear-cut in standard external holders and boring bars. The 0° clearance and the 50° cutting approach angle support reliable geometry transfer between insert and holder, simplifying tool setup and replacement in production contexts. Application focus and operational benefits for turning Designed primarily for turning operations in medium cutting regimes, the insert excels in external and internal profiling where a sharp cutting edge and stable wear behaviour are required. The engineered balance of hardness and edge stability offered by this insert reduces dressing frequency and extends change intervals, contributing to lower unit cost per part in continuous production runs. For manufacturers seeking a practical, application‑oriented insert, the product supports consistent throughput and reproducible component quality. Contact Metav Werkzeuge to source the Tungaloy FNMG110402E-TSF AH6225 insert for enhanced chip control and longer cutting performance in stainless steel turning applications Technical Data Manufacturer item no.: 6947647 SKU (manufacturer): TUN6947647 SKU: 6947647-Tungaloy Manufacturer: Tungaloy Key dimensions Insert size: 11 mm Insert thickness: 4.76 mm Corner radius: 0.2 mm Cutting approach angle: 50° Clearance angle: 0° Features and materials Grade / coating: AH6225, PVD‑coated carbide Chipbreaker: TSF Shape: rhombic (FNMG) Hole: with hole, cylindrical hole ISO designation: FNMG110402E-TSF Application: Turning (external & internal); optimised for stainless steels Material: Carbide FAQ What materials is this insert best suited for? The FNMG110402E-TSF AH6225 insert is optimised for stainless steels and is designed to perform reliably in medium turning operations on such materials. How does the TSF chipbreaker improve machining? The TSF chipbreaker on the FNMG110402E-TSF promotes short, controlled chips and consistent chip evacuation, which improves surface finish and reduces the risk of tool interference during turning. Which holder types are compatible with this FNMG insert? Compatibility depends on holder form and specifications; the FNMG110402E-TSF fits ISO FNMG holders and standard external and boring holders designed for FNMG inserts when form, size and fastening match. What are the key dimensions to check when replacing the insert? Check the insert size (11 mm), thickness (4.76 mm), corner radius (0.2 mm), and the FNMG form to ensure proper fit and performance with the chosen holder. Is the coating suitable for interrupted cuts or variable conditions? The PVD‑coating on grade AH6225 is engineered to provide adhesion resistance and improved wear behaviour, making the insert suitable for variable conditions typical in production turning of stainless steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110402 AH8015 TSF Wendeplatten - Tungaloy
High productivity and predictable tool life are achieved through the combination of the PVD-coated AH8015 grade and the TSF chipbreaker, while the ISO FNMG geometry guarantees wide compatibility with standard holders; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. FNMG 110402 AH8015 — Indexable turning insert (TSF chipbreaker) by Tungaloy The FNMG 110402 AH8015 is an ISO-standard rhombic indexable insert designed for precision external and internal turning of heat-resistant alloys and general engineering steels ISO FNMG 110402 geometry PVD-coated carbide AH8015 TSF precision chipbreaker 0.2 mm corner radius Enhanced productivity through balanced grade and coating The FNMG110402E-TSF AH8015 insert pairs a PVD-coated carbide AH8015 substrate with a geometry optimised for demanding operations, delivering a balance between wear resistance and cutting-edge stability. The PVD layer reduces flank wear and increases resistance to built-up edge under elevated temperatures; as a result, tool life is extended and the cost per component is lowered. This combination is particularly effective when machining heat-resistant alloys, where thermal loads and abrasive wear are common. Selecting a grade that balances toughness and hardness ensures consistent results across medium to heavy cutting conditions. Secure clamping and versatile ISO compatibility The rhombic shape with an inscribed circle of 11 mm, 4.76 mm thickness and a 50° cutting angle provides a stable cutting edge and straightforward insert orientation. Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the ISO FNMG standard guarantees interchangeability with a wide range of standard holders. The insert features a cylindrical hole for positive seating and a 0° clearance angle, which supports rigid clamping and repeatable positioning. The TSF chipbreaker is tuned for controlled chip formation, improving surface finish and reducing the risk of chip entanglement in long-turning cycles. Application guidance and operational advantages Designed primarily for turning operations, the insert is suitable for both external and internal machining when the correct chipbreaker and cut parameters are chosen. Use the TSF chipbreaker and select cutting data appropriate to the workpiece material and machine rigidity to achieve optimal surface integrity and process stability. The modest 0.2 mm corner radius helps to extend edge life while still permitting fine-detail passes. Indexable inserts like this one enable rapid replacement, minimising downtime and simplifying inventory management. For processes requiring consistent performance across batches, the insert’s predictable wear characteristics support higher uptime and reproducible component quality. Contact Metav Werkzeuge for tailored advice on matching the FNMG 110402 AH8015 insert to specific turning tasks; reach our technical team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for immediate assistance. Technical data Article number: 6799668 SKU: 6799668-Tungaloy Manufacturer SKU: TUN6799668 Designation: FNMG110402E-TSF Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.2 mm Thickness: 4.76 mm Inscribed circle: 11 mm Cutting angle: 50° Clearance angle: 0° Hole: with cylindrical hole Special features PVD-coated carbide AH8015 TSF chipbreaker Rhombic plate form ISO-standard FNMG geometry Intended application: turning Compatible with standard external holders and boring bars FAQ What materials is this insert best suited for? The FNMG110402E-TSF AH8015 insert is formulated for machining heat-resistant alloys and general engineering steels; the AH8015 grade offers a balanced combination of wear resistance and edge stability suitable for those materials. How does the TSF chipbreaker affect performance? The TSF chipbreaker promotes controlled chip formation and evacuation, which improves surface finish and reduces the likelihood of chip-related interruptions when using the FNMG 110402 AH8015 insert. Is this insert compatible with standard FNMG holders? Yes, the ISO FNMG 110402 geometry ensures interchangeability with standard FNMG holders; compatibility is ensured when form, clearance angle, tolerance class, fastening method, size and thickness match the holder specifications. What does the 0.2 mm corner radius mean for turning quality? A 0.2 mm corner radius provides a compromise between edge strength and the ability to produce fine surface finishes; it helps to extend edge life while maintaining dimensional accuracy in finishing passes. Can the insert be used for both external and internal turning? The insert is suitable for both external and internal turning operations when mounted in a compatible external holder or boring bar and when the correct cutting parameters and chipbreaker are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110402 T6215 TSF Wendeplatten - Tungaloy
High wear resistance from a CVD‑coated carbide grade, a precise 0.2 mm corner radius and the TSF chipbreaker deliver consistent surface quality and extended tool life for stainless‑steel turning. Combined with ISO compatibility and a rhombic 50° geometry, this insert supports efficient, repeatable turning operations. Order the insert directly via Metav Werkzeuge or request specialist advice from the technical team. FNMG 110402 T6215 Tungaloy indexable insert for turning — CVD‑coated carbide, 50° rhombic The FNMG110402E-TSF T6215 is an ISO‑standard indexable insert for external and internal turning, engineered for machining stainless steels under stable to slightly interrupted conditions. CVD‑coated carbide for long life 50° rhombic geometry for versatile turning 0.2 mm corner radius for precise finishes TSF chipbreaker with cylindrical locating hole Improved process reliability and productive turning The combination of a CVD‑coated wear‑resistant grade and a robust geometry provides measurable advantages in turning applications. The coating enhances abrasion resistance, so the insert sustains cutting edges longer under continuous operation, which reduces changeovers and downtime. The TSF chipbreaker stabilises chip formation during medium‑duty cuts, leading to consistent surface quality and fewer interruptions. These technical benefits translate into higher throughput and predictable tool life, supporting process planning and cost‑effective production. Straightforward integration with ISO tool systems Compatibility with common toolholders is governed by form, clearance, tolerance class, fastening, size and thickness; this insert follows the ISO FNMG standard for simple interchangeability. The 0° clearance angle and the rhombic 50° seating ensure predictable cutting forces and favourable chip flow in many holder types. The insert’s cylindrical locating hole streamlines clamping accuracy and facilitates correct orientation during index changes. Clear specification of these parameters helps engineers match the insert to existing tool assemblies, reducing setup time and effort. Practical guidance for stainless‑steel turning For stainless‑steel workpieces, the T6215 grade is designed to handle adhesion and built‑up edge tendencies common to the material family. The 0.2 mm corner radius supports a balance between strength for roughing and the ability to produce a fine finish when light passes are used. The 4.76 mm thickness and rhombic form contribute to stiffness at the cutting edge, improving dimensional stability in external and internal turning operations. Select feed and speed according to material condition and rigidity; the chipbreaker and grade perform best under stable to lightly interrupted cuts, where they offer improved control over chip shape and tool wear. For reliable stainless‑steel turning with Tungaloy’s T6215 grade, contact Metav Werkzeuge for availability and application advice — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6945198 Manufacturer SKU: TUN6945198 SKU: 6945198-Tungaloy Model series: ISO‑Drehwendeschneidplatten Label: FNMG110402E-TSF T6215 Tungaloy‑insert Facts Corner radius: 0.2 mm Clearance angle: 0° Plate thickness: 4.76 mm Insert size: 11 Geometry angle: 50° Special features Material: carbide Coating / grade: T6215 (CVD‑coated carbide) Chipbreaker: TSF Plate shape: rhombic Hole: with cylindrical locating hole Application: turning of stainless steels ISO designation: FNMG110402E‑TSF FAQ What materials is this insert suitable for? The FNMG110402E‑TSF in T6215 grade is intended primarily for stainless steel machining; the CVD‑coated carbide resists abrasion and adhesion typical of such alloys. Which chipbreaker and geometry are provided? This insert features the TSF chipbreaker and a 50° rhombic geometry, optimised for controlled chip formation and versatile turning tasks. How does the corner radius affect performance? A 0.2 mm corner radius offers a compromise between edge strength and surface finish, making the insert suitable for both finishing passes and light roughing when machine rigidity is adequate. Is the insert compatible with standard ISO FNMG holders? Yes — the insert follows the ISO FNMG form; compatibility depends on holder form, tolerance class, fastening and thickness, so matching these parameters ensures correct fit and clamping. What is the manufacturer article number and SKU? Manufacturer article number is 6945198 and the manufacturer SKU is TUN6945198, listed as SKU 6945198‑Tungaloy in the catalogue. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
FNMG 110402 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance and fracture toughness provided by the T9215 grade, together with ISO conformity and straightforward holder compatibility for efficient turning operations. Order the FNMG110402 T9215 Tungaloy indexable insert via Metav Werkzeuge or request selection advice from our consultants. FNMG 110402 T9215 indexable insert for turning — Tungaloy The FNMG 110402 T9215 is an ISO‑standard rhombic indexable insert designed for external and internal turning, optimised for medium steel machining with a TSF chipbreaker for continuous to light interrupted cuts. ISO rhombic insert FNMG 110402 standard CVD-coated carbide T9215 for medium steel TSF chipbreaker for continuous cuts Compatible with standard external holders Productive machining for medium steel with proven carbide grade The FNMG110402E‑TSF combines a CVD‑coated carbide substrate and the proven T9215 grade to deliver a balance of wear resistance and fracture toughness that supports high productivity in turning operations. This composition is particularly effective in continuous and slightly interrupted cuts, where tool life and edge stability determine cycle times. The TSF chipbreaker stabilises chip flow and reduces cutting forces, which translates into steadier feeds and improved component consistency on batch production runs. Easy integration through ISO conformity and clear holder matching Designed to the ISO geometry, the insert guarantees predictable fitment across compatible external and internal holders; compatibility is defined by form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic form with a 50° cutting edge angle and a 0° relief angle allows straightforward matching to standard FNMG‑type toolholders. Specifying ISO‑conforming components reduces setup time and simplifies inventory management, making process planning more efficient for engineering and production teams. Stability, edge security and application benefits explained A 0.2 mm corner radius and a plate thickness of 4.76 mm provide a robust cutting edge that resists chipping under typical steel turning loads. The TSF chipbreaker is engineered to manage short chips in medium steel, improving surface finish while protecting the cutting edge from brittle fracture. For users with varying workpiece geometries, the insert’s cylindrical hole and standard fixing pattern permit secure clamping and repeatable index changes, helping to maintain part tolerances and reduce rework rates. Practical selection guidance and material fit Choose the T9215 grade when the primary workpiece material is medium‑hard steel and the process requires a combination of durability and edge reliability. The combination of CVD coating and tungsten carbide substrate is geared to broad material coverage and consistent tool life, making it suitable for production environments where predictable performance and low variation are priorities. When preparing toolsets, select a matching external holder and ensure the tolerance class and clearance angle correspond to the ISO geometry to achieve the advertised performance. Contact Metav Werkzeuge for tailored advice on selecting the appropriate Tungaloy insert and matching holder for precise turning applications Technical data Article number: 6799568 Manufacturer SKU: TUN6799568 SKU: 6799568-Tungaloy Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Facts Radius: 0.2 mm Size: 11 mm Thickness: 4.76 mm Cutting edge angle: 50° Relief angle: 0° Included hole style: cylindrical Special features CVD-coated carbide Grade: T9215 Chipbreaker: TSF Rhombic insert shape (FNMG) ISO-standard indexable insert Suitable for external and internal turning Optimised for medium steel, continuous to light interrupted cuts FAQ What materials is this insert suitable for? The FNMG 110402 T9215 insert is optimised for medium steel machining; the T9215 grade and CVD coating combine to support good wear resistance and edge security in steel turning applications. Which chipbreaker is fitted and what is its benefit? This insert is supplied with the TSF chipbreaker, which controls chip formation during continuous and light interrupted cuts and contributes to improved surface finish and reduced cutting forces. How does ISO conformity aid tool selection? ISO conformity ensures predictable geometry and reliable fitment with compatible holders; the FNMG form, size and thickness follow ISO dimensions to simplify holder matching and repeatability. What holder features must be matched for correct compatibility? Compatibility is determined by the insert form, clearance (relief) angle, tolerance class, fastening method, size and thickness; matching these parameters to the holder ensures secure clamping and repeatable indexing. Is this insert suitable for interrupted cuts? Yes; the T9215 grade offers a balance of wear resistance and fracture toughness that performs well in continuous to slightly interrupted turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110402 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide and a proven TSF chipbreaker to ensure stable chip control and consistent performance during medium to heavy turning operations; order the insert directly via Metav Werkzeuge or consult the team for application advice. FNMG 110402 T9225 — FNMG Turning Insert by Tungaloy (CVD-coated, TSF chipbreaker) A FNMG110402E-TSF T9225 indexable turning insert designed for reliable external and internal turning of steels under variable engagement conditions. CVD-coated carbide grade T9225 for steel machining TSF chipbreaker for medium to heavy cuts Rhombic FNMG form with 0.2 mm corner radius Improved stability and productivity for steel turning The rhombic FNMG geometry combined with the T9225 grade provides a balance of toughness and wear resistance that benefits interrupted and continuous turning alike. The CVD-coated carbide composition enhances edge stability at elevated cutting temperatures, which translates into more consistent machining cycles and fewer insert changes. With a 0.2 mm corner radius and a 50° included angle, the geometry reduces cutting forces in typical external operations while maintaining a robust cutting edge for tougher passes. Clear compatibility and mounting for secure clamping Designed as an ISO indexable insert, the part adheres to established holder and clamping standards: compatibility is defined by form, relief angle, tolerance class, attachment style, size and thickness. The insert features a cylindrical hole for positive location and secure fastening in suitable FNMG holders. The 4.76 mm thickness and 11 mm inscribed circle ensure mechanical stability in a wide range of standard external holders, simplifying tool selection in mixed-production environments. Chip control and process reliability under varying conditions The integrated TSF chipbreaker is tuned for medium to heavy steel cutting, promoting predictable chip formation and evacuation even with fluctuating depths of cut. Such controlled chip behaviour reduces rework and downtime while improving surface integrity. The robust universal grade is particularly suited to shops facing variable workpiece materials or intermittent cuts, where a tougher grade reduces the risk of premature edge failure. Practical selection guidance for productive use When selecting a turning system, match the insert geometry and T9225 grade to the required feed and depth of cut and verify holder compatibility for the rhombic FNMG form. The insert’s specifications favour turning of steels and similar ferrous materials; users benefit from its forgiving performance under less-than-ideal conditions, meaning fewer tool changes and steadier cycle times. For specific machining parameters, consult Metav Werkzeuge for configurable recommendations based on workpiece material and machine capability. Contact Metav Werkzeuge for tailored application advice and availability of the Tungaloy FNMG110402E-TSF T9225 turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6799581 SKU: 6799581-Tungaloy Manufacturer SKU: TUN6799581 Model series: ISO indexable turning inserts Manufacturer article number: 6799581 Dimensions & measurable data Inscribed circle: 11 mm Thickness: 4.76 mm Corner radius: 0.2 mm Included angle: 50° Relief angle: 0° Designs / Special features Rhombic insert form (FNMG) CVD-coated carbide, grade T9225 TSF chipbreaker Cylindrical hole for secure clamping Application: turning (external and internal) FAQ Is this insert suitable for interrupted cuts in steel? The Tungaloy FNMG110402E-TSF T9225 insert is designed as a robust universal grade for medium to heavy steel machining and performs well under lightly interrupted cutting conditions. Which holder type fits the FNMG110402E-TSF insert? Compatibility depends on holder form and dimensions; the rhombic FNMG shape, 11 mm inscribed circle and cylindrical hole match standard FNMG external holders when the holder accepts the specified thickness and tolerance class. Can the insert be used for internal turning? Yes, the geometry and grade allow for both external and internal turning where the holder design permits secure mounting of a rhombic FNMG insert. What advantages does the T9225 grade offer in production? T9225 provides enhanced toughness and stable chip formation for a broad range of steels, offering longer edge life under variable engagement and improved process stability. Is the coating suitable for higher cutting temperatures? The CVD-coated carbide construction improves thermal resistance at elevated cutting temperatures, supporting consistent machining performance in demanding cycles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110404 AH6225 Wendeplatten - Tungaloy
Combining a universal PVD-coated carbide grade with the ISO FNMG110404 geometry and a 0.4 mm corner radius, this insert offers a balance of sharp cutting action and edge stability for medium turning operations, particularly on stainless steel. Order directly via Metav Werkzeuge or contact our consultants for holder compatibility and application advice. FNMG 110404 AH6225 Tungaloy — ISO FNMG110404 indexable turning insert, PVD carbide, 50° The FNMG110404 AH6225 is an ISO-standard indexable turning insert intended for external and internal turning, engineered for consistent performance in varying conditions and optimised for stainless steel applications PVD-coated universal grade AH6225 50° lead angle for versatile turning 0.4 mm corner radius for stable edge Double-sided chipbreaker with cylindrical hole Proven cutting performance for stainless steel and mixed jobs The PVD-coated carbide grade AH6225 delivers a combination of cutting-edge sharpness and durability, designed for medium machining and changing operational conditions. Its coating reduces built-up edge and improves wear resistance, which helps maintain a stable cutting edge over longer tool life. Specified as an ISO FNMG110404 geometry, the insert provides predictable chip formation and consistent engagement with the workpiece, which supports reproducible productivity in batch and single-part production environments. Geometry that balances finish and strength The rhombic FNMG shape with a 50° lead angle reduces radial cutting forces and improves access in external and internal turning, aiding both profile and shoulder work. The 0.4 mm corner radius increases edge strength and contributes to a superior surface finish when feeds and depths are matched to the geometry. A double-sided chipbreaker offers two usable cutting edges per index, while the cylindrical hole enables secure clamping in compatible holders; these design choices combine to lower tooling cost per component and simplify inventory management. System compatibility and practical benefits at the machine An indexable workflow requires the insert, a matching external holder or boring bar, and the correct backing and fixing hardware. Compatibility is governed by insert form, clearance (frewinkel), tolerance class, mounting method, size and thickness; the FNMG110404 format ensures wide availability of suitable holders. Where stainless steel is the primary material, the universal AH6225 grade supports reliable chip control and consistent surface quality under medium cutting conditions, reducing rework and improving throughput for production shops. Contact Metav Werkzeuge for tailored guidance on holder compatibility and cutting data for Tungaloy FNMG110404 AH6225 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947648 Numerical data ISO code: 110404 Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Lead angle: 50° Relief angle: 0° Manufacturer SKU: TUN6947648 Design and special features Material: carbide Coating / grade: AH6225 (PVD-coated) Shape: rhombic (FNMG) Hole: with cylindrical hole Chipbreaker: double-sided Application: turning Model series: ISO turning indexable inserts Label: FNMG110404 AH6225 Tungaloy-Wendeplatte Manufacturer: Tungaloy FAQ What materials is this insert suited for? The FNMG110404 AH6225 insert is optimised as a universal grade for stainless steel and is suitable for medium turning tasks where a sharp yet stable cutting edge is required. How does the 50° lead angle affect machining? A 50° lead angle reduces radial forces and improves access for shoulder and profile turning; the geometry of the FNMG110404 insert helps achieve stable cutting behaviour and consistent surface finish. What is the benefit of the 0.4 mm corner radius? A 0.4 mm corner radius increases edge strength and supports better surface quality at appropriate feed rates, offering a compromise between finish and durability for typical turning operations. How is the insert clamped and indexed? The insert features a cylindrical hole for secure clamping and a double-sided chipbreaker allowing two indexing positions; compatibility depends on holder form, tolerance class and thickness matching Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110404 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, stable cutting edge and broad material compatibility to maintain productive turning operations; the insert’s PVD-coated AH6225 grade and 0.4 mm corner radius deliver consistent performance under changing conditions. Order the FNMG110404 AH6225 Tungaloy insert directly via Metav Werkzeuge or request advice from their consultants for application-specific selection. FNMG 110404 AH6225 Turning Insert (ISO) by Tungaloy — PVD-coated carbide, 50° rhombic FNMG110404 AH6225 is an ISO-standard rhombic turning insert intended for external and internal turning of rostfreiem Stahl and similar materials Rhombic 50° geometry for versatile turning PVD-coated carbide AH6225 for rostfreiem Stahl 0.4 mm corner radius for stable cutting edge Cylindrical hole for secure, ISO-compatible clamping Fast integration with ISO tooling for predictable set-up The insert is manufactured to ISO dimensions, so compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening method, size and thickness, which are specified for the series. This standardisation enables straightforward replacement and accurate register in existing holders, reducing set-up time and minimising the risk of misalignment. Clear labelling of geometry and size supports correct selection during procurement and machine changeovers. Consistent cutting performance on rostfreiem Stahl The AH6225 grade is a PVD-coated carbide mix optimised for rostfreiem Stahl machining, designed to combine a sharp yet stable cutting edge for medium cutting conditions and varying workpiece states. The double-sided chipbreaker assists in producing short, controllable chips under interrupted or continuous cuts. The insert’s 0.4 mm corner radius and 50° rhombic geometry balance edge strength with surface finish, making it suitable for finishing and medium-turning operations. System approach for productivity and repeatable tool life The ISO insert is intended to be used as part of a system: insert, a matching external holder or boring bar, a backing plate or clamp set and replacement screws. This modular approach enables consistent clamping and repeatable performance, supporting stable chip formation and longer effective life of the cutting edge. The PVD surface layer reduces built-up edge tendencies, aiding process stability and predictable maintenance intervals, which supports efficient shop-floor planning and cost control. Practical selection advice for reliable results Choose the chipbreaker and grade in line with workpiece material, machining type and machine stability: the AH6225 grade is a universal choice for rostfreiem Stahl when a robust edge and consistent performance are required. For deep interrupted cuts or heavy roughing, consider larger corner radii or more robust geometries; for fine finishing, the 0.4 mm radius and the rhombic 50° shape provide a reliable compromise between finish and edge strength. Ensure the chosen holder matches the insert form, clearance angle and size to preserve the specified tolerances. For purchases or technical guidance on the FNMG110404 AH6225 Tungaloy turning insert, contact Metav Werkzeuge GmbH — enquiries by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for precise grade and holder matching advice Technical Data Article number: 6947652 SKU: 6947652-Tungaloy Manufacturer item number: 6947652 Manufacturer SKU: TUN6947652 Facts Corner radius: 0.4 mm Inscribed circle: 11 mm Thickness: 4.76 mm Clearance angle: 0° Insert angle: 50° Bore: with cylindrical hole Special features ISO turning insert series Rhombic plate form PVD-coated carbide, grade AH6225 Double-sided chipbreaker Suitable for external and internal turning Designed for rostfreiem Stahl machining FAQ What materials is this insert suitable for? The FNMG110404 AH6225 Tungaloy insert is specified for rostfreiem Stahl and similar alloys; the AH6225 PVD-coated carbide provides a compromise of sharpness and edge stability for medium machining. How does the PVD coating benefit machining? The PVD coating on the AH6225 grade reduces friction and minimises built-up edge formation, which helps maintain the cutting geometry and improves consistent surface finish when using the FNMG110404 insert. Which holders are compatible with this insert? Compatibility depends on matching the insert form, clearance angle, tolerance class, fastening method, size and thickness; the FNMG110404 geometry and cylindrical bore are compatible with ISO holders designed for rhombic FNMG inserts. Is the chipbreaker suitable for interrupted cuts? The double-sided chipbreaker on this insert supports controllable chip formation and can be used in interrupted and continuous turning, with the caveat that holder rigidity and cutting parameters must be adapted accordingly. How many cutting edges are available per insert? The FNMG110404 is double-sided; rotating to the next index provides additional usable cutting edges, extending the effective life per insert and improving cost-efficiency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8015 and an ISO FNMG110404 rhombic form to secure consistent edge stability and extended tool life in demanding turning operations; the double-sided geometry and cylindrical hole provide straightforward re-indexing and reliable clamping in ISO-compatible holders. Order directly via Metav Werkzeuge or consult the team for application support. FNMG110404 AH8015 Tungaloy insert – PVD-coated carbide, rhombic ISO turning insert The FNMG110404 AH8015 Tungaloy insert is an ISO-standard, rhombic, double-sided turning insert designed for general machining of heat-resistant alloys and for use in compatible external and internal turning holders. ISO FNMG110404 rhombic insert, 11 mm PVD-coated carbide AH8015 for heat-resistant alloys 0.4 mm corner radius for versatile finishing Double-sided geometry with cylindrical hole Consistent performance for demanding turning operations The PVD-coated carbide grade AH8015 offers an optimised balance between wear resistance and cutting-edge stability, making it well suited to the general machining of heat-resistant alloys. That balance translates into longer tool life and a more consistent surface finish on workpieces, reducing the need for frequent insert changes and lowering process interruptions. The coating also enhances heat tolerance during sustained cuts, which supports higher productivity in series production environments. Secure fit and simple integration into ISO tool systems Supplied in the ISO FNMG format, the rhombic form and the presence of a cylindrical hole ensure compatibility with standard FNMG toolholders where fit is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The double-sided design allows for economical re-indexing: once one edge is worn, a simple rotation provides a fresh cutting edge without unnecessary downtime. The standardised geometry supports predictable clamping behaviour and repeatable positioning in compatible holders. Fine finishing and flexible application range With a 0.4 mm corner radius, this insert is optimised for versatile finishing and light to medium machining operations; it delivers a balance between edge strength and the ability to produce a fine surface finish. The doppelseitig chipbreaker configuration (double-sided chipbreaking) accommodates a range of chip control requirements and can be matched to the workpiece material and machining stability. Assembly into the cutting system requires the insert, a compatible external holder or boring bar, a suitable clamp or shim set and the correct screw — a simple system that reduces sourcing complexity and aids process planning. Discuss specific applications and availability with Metav Werkzeuge — product and process consultants can advise on holder compatibility, recommended cutting data and sample availability; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6799669-Tungaloy Manufacturer SKU: TUN6799669 Manufacturer item number: 6799669 Model series: ISO turning indexable inserts Label: FNMG110404 AH8015 Tungaloy-Wendeplatte Core data Insert size: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Included hole: with cylindrical hole Lead/angle: 50° Features and compatibility Material: carbide Coating / grade: PVD-coated AH8015 Form: rhombic Chipbreaker: double-sided Typical application: external and internal turning System components: ISO insert, matching external holder or boring bar, shim/clamp set, replacement screw FAQ What materials is this insert suitable for? The FNMG110404 AH8015 Tungaloy insert is specified for the general machining of heat-resistant alloys; the PVD-coated AH8015 grade is balanced for wear resistance and edge stability in such materials. How does the double-sided design affect tool economy? Double-sided geometry enables re-indexing to a fresh edge, reducing the number of inserts required per part and improving overall tooling economy for repetitive turning tasks. Which holder features ensure compatibility with this insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; holders designed for FNMG inserts with a cylindrical hole will provide secure clamping for this product. What finish can be expected with a 0.4 mm corner radius? A 0.4 mm radius typically provides a good compromise between edge strength and surface quality, supporting fine finishing passes while maintaining acceptable edge robustness for light to medium cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110404 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated carbide grade tuned for heat‑resistant alloys, a compact 0.4 mm corner radius for controlled cutting, and ISO compatibility that simplifies holder selection; order directly via Metav Werkzeuge or contact the consultants for application advice. FNMG 110404 AH8015 Turning indexable insert — Tungaloy The FNMG 110404 AH8015 is an ISO‑format turning indexable insert designed for external and internal turning of heat‑resistant alloys and general turning tasks, offering a balanced mix of wear resistance and edge stability ISO FNMG 110404 indexable insert PVD‑coated carbide grade AH8015 Double‑sided chipbreaker, cylindrical hole 0.4 mm corner radius for stable cuts Consistent cutting performance for heat‑resistant alloys The PVD‑coated carbide grade AH8015 is formulated for the reliable machining of heat‑resistant alloys, providing a compromise between wear resistance and cutting edge stability. This coating reduces adhesion and thermal wear, which in practice means fewer unexpected edge failures and more predictable tool life. The combination of substrate and coating suits continuous and interrupted turning where temperature resistance and a stable cutting edge are required. Precise chip control and secure clamping for reproducible results A double‑sided chipbreaker and a cylindrical centre hole ensure effective chip formation and repeatable seating in compatible holders. The insert’s geometry, clearance angle and fastening interface are ISO standardised, so the compatibility with turning holders depends on form, free angle, tolerance class, fastening method, size and thickness. The dedicated chipbreaker lowers the risk of long, stringy chips and improves surface consistency during medium to heavy cuts. Geometry optimised for surface finish and tool life The rhombic insert form with a 0.4 mm corner radius and a 50° main cutting angle produces a favourable contact geometry for fine surface finishes while maintaining edge strength. The 0° rake angle and a plate thickness of 4.76 mm contribute to rigidity under load, reducing vibration and enabling steady feed rates. These geometric choices support repeatable dimensional accuracy and extend usable life between indexings. System approach and recommended applications As part of an ISO insert system, the component functions together with a suitable external holder or boring bar, a shim/clamping set and replacement fastening screws. Typical use is in turning operations — both external and internal — where the operator chooses the chipbreaker and grade according to workpiece material and machining stability. The insert is especially suitable for workshop and production environments aiming for consistent productivity on heat‑resistant alloys. For reliable turning of heat‑resistant alloys and practical advice on machine compatibility, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 — to discuss Tungaloy FNMG 110404 AH8015 inserts and system setup. Technical data Article number: 6799672 Manufacturer item number / SKU: TUN6799672 SKU: 6799672-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Facts ISO designation: FNMG110404 Size: 11 Plate thickness: 4.76 mm Corner radius: 0.4 mm Main angle: 50° Rake angle: 0° Hole: with hole (cylindrical) Special features Grade/coating: AH8015, PVD‑coated carbide Plate shape: rhombic Chipbreaker: double‑sided Typical application: Turning (external and internal) System components: ISO insert, appropriate external holder or boring bar, shim/clamping set, spare screws FAQ What materials is this insert intended for? The FNMG 110404 AH8015 insert is intended primarily for heat‑resistant alloys and general turning applications; the AH8015 grade balances wear resistance and edge stability for these materials. How does the chipbreaker affect machining? The double‑sided chipbreaker on this indexable insert improves chip control and reduces the likelihood of long, entangling chips, which helps maintain surface quality during turning operations. Is the insert compatible with my holder? Compatibility depends on holder form, clearance angle, tolerance class, fastening type, size and thickness; the FNMG110404 format follows ISO standards, so matching an ISO‑compliant external holder or boring bar ensures correct fit. How does the 0.4 mm corner radius influence results? A 0.4 mm corner radius provides a balance between a fine surface finish and edge strength, reducing the risk of chipping while supporting consistent dimensional accuracy. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning when paired with the correct holder geometry and stability conditions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
FNMG 110404 T6215 Wendeplatten - Tungaloy
Take advantage of a high-wear CVD-coated carbide grade and a precise 0.4 mm corner radius for stable, repeatable turning of stainless steels; the combination ensures long tool life and consistent chip control in both external and internal operations. Order directly via Metav Werkzeuge or ask our consultants for application advice. FNMG110404 T6215 turning insert for turning (Tungaloy, ISO 110404, 50°) A FNMG110404 T6215 ISO turning insert engineered for external and internal turning, offering a CVD-coated carbide grade for machining stainless steels under stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 Designed for turning stainless steels 0.4 mm corner radius for precision Double-sided chipbreaker, with cylindrical hole Longer life and reliable chip control for stainless steels The CVD-coated carbide composition of this indexable insert provides elevated wear resistance and consistent cutting-edge performance, which translates into longer tool life and fewer changeovers on the shop floor. The T6215 grade is optimised for machining stainless steels, offering improved adhesion resistance and thermal stability compared with uncoated substrates. The integrated double-sided chipbreaker promotes predictable chip formation and evacuation, reducing the risk of build-up and minimising downtime. Together, these features support more stable cutting conditions and a better cost-per-component in series production. ISO compatibility and simple integration into existing tool systems Built to the FNMG110404 ISO geometry, the insert matches standard holders when form, relief angle, tolerance class, clamping and thickness are compatible. The rhombic plate form and 50° geometry suit a wide range of external and internal turning applications; the insert comes with a cylindrical hole for positive clamping and replacement. Key dimensions such as the 4.76 mm plate thickness and the 0° relief angle ensure mechanical rigidity in the tool assembly, while the modest inscribed circle size keeps the setup compact. This design focus eases retrofitting into existing toolholders and supports repeatable positioning for accurate batch work. Practical benefits: precision, surface finish and productivity A 0.4 mm corner radius offers a balanced mix of edge strength and finishing capability, enabling fine surface results without sacrificing robustness in interrupted cuts. The geometry and coating combination deliver consistent cutting forces, which helps maintain tool life and reduces the need for frequent machine adjustments. For manufacturers prioritising productive machining and process stability, the insert supports higher uptime and more predictable output quality. In short, the engineering of the cutting grade and the chip management system together increase process reliability and enhance overall machining efficiency. Contact Metav Werkzeuge for a tailored recommendation on integrating Tungaloy FNMG110404 T6215 inserts into production lines or to request detailed cutting-data sheets and availability Technical data Article number: 6945202 Manufacturer SKU: TUN6945202 Brand: Tungaloy Designation: FNMG110404 T6215 Tungaloy insert Facts Corner radius: 0.4 mm Relief angle: 0° Plate thickness: 4.76 mm Size (inscribed circle): 11 mm Geometry angle: 50° Special features CVD-coated carbide grade T6215 Double-sided chipbreaker Rhombic plate form (FNMG) With cylindrical hole for clamping Suited for external and internal turning Recommended for stainless steels under stable to slightly interrupted conditions FAQ Is this insert suitable for finishing stainless steel components? The FNMG110404 T6215 insert is designed to deliver good surface finish on stainless steels, with its 0.4 mm corner radius and CVD coating helping to maintain edge integrity during finishing passes. Can the FNMG110404 T6215 be used in existing FNMG holders? Yes; the insert conforms to ISO FNMG110404 geometry, so compatibility depends on holder form, clamping style, tolerance class and plate thickness—ensure the holder accepts a 4.76 mm thick, rhombic insert with a cylindrical hole. What cutting conditions are recommended for this grade? Tungaloy’s T6215 grade is intended for stable to slightly interrupted cuts in stainless steels; select cutting speeds and feeds according to material, stability and machine capability to exploit the coating and substrate performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110404 T6215 Wendeplatten - Tungaloy
Benefit from a combination of wear-resistant CVD coating, precise ISO conformity and a geometry engineered for stable turning of rostfreier Stahl; order directly via Metav Werkzeuge or ask the technical team for application advice. FNMG 110404 T6215 Turning indexable insert for turning by Tungaloy A FNMG 110404 T6215 indexable insert designed for external and internal turning, offering a wear-resistant CVD grade for stable to slightly interrupted machining. CVD-coated carbide T6215 for wear resistance ISO-standard FNMG110404 for consistent fit Double-sided chipbreaker for versatile turning 0.4 mm corner radius for improved finish Durable wear resistance for stainless-steel turning The CVD-coated T6215 grade combines a wear-resistant finish with a tough carbide substrate to extend tool life during extended runs on rostfreier Stahl. The chemical vapour deposition layer reduces flank and crater wear under stable cutting conditions, which translates into fewer insert changes and increased machine uptime. The coating also helps to maintain edge integrity when light interruptions occur, so consistent surface quality is achievable without frequent tool intervention. Predictable fit and compatibility with ISO holders Manufactured to ISO specification, the FNMG form ensures reliable clamping and repeatable position tolerance when used with suitable external holders or boring bars. Compatibility is determined by geometry, relief angle 0°, tolerance class, clamping method, size and thickness, so the system—insert, holder, shim and screw—functions as a cohesive unit. This standardisation simplifies tool inventory and reduces set-up variability, supporting reproducible component quality across production batches. Geometry tuned for surface quality and stability The rhombic plate with an approach angle 50° and 0.4 mm corner radius delivers a balance between edge strength and fine surface finish. The double-sided chipbreaker provides consistent chip control for a range of feeds and depths, while the cylindrical hole enables secure clamping. These features reduce vibration and promote repeatable part finishes, making the insert suited to external profiling and light internal turning where dimensional consistency is required. System advantages that improve productivity Used as part of an ISO turning system, the indexable component supports efficient changeover and predictable economics. Because the grade is optimised for stable to lightly interrupted turning, machining costs are lowered through extended tool life and fewer tool changes. The insert’s construction and chip control contribute to process stability, which in turn supports higher throughput and reduced rework rates. For production environments seeking steady, measurable gains, this solution helps to maintain cycle-time targets and surface specifications. For machining rostfreier Stahl with high process reliability, choose the Tungaloy FNMG 110404 T6215 grade and contact Metav Werkzeuge for ordering or technical application support – info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6945199 Manufacturer SKU: TUN6945199 SKU: 6945199-Tungaloy Model series: ISO-Drehwendeschneidplatten Type designation: FNMG110404 Material: Hartmetall Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 11 mm Approach angle: 50° Relief angle: 0° Clamping: with hole Special features Coating: T6215 (CVD) Chipbreaker: double-sided Plate shape: rhombic Hole style: cylindrical Application: Drehen FAQ What materials is this insert intended for? The FNMG 110404 T6215 insert is specified for machining rostfreier Stahl and is formulated to deliver wear resistance during stable to lightly interrupted turning. How does the T6215 coating affect tool life? The CVD-based T6215 coating on the insert improves wear resistance on the cutting edge, which generally increases insert life and reduces changeover frequency in production. Is this insert compatible with standard FNMG holders? Yes, the FNMG110404 geometry conforms to ISO standards and will fit compatible FNMG holders when matched for form, relief angle, tolerance and thickness. What surface finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius offers a compromise between edge strength and finish; it supports improved surface quality for general turning while maintaining adequate edge robustness. Which SKU should be referenced when ordering or enquiring? Please reference SKU 6945199-Tungaloy or manufacturer SKU TUN6945199 when placing orders or requesting technical support. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110404 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide durability, 0.4 mm nose radius accuracy and ISO compatibility for efficient, repeatable turning operations. Order the FNMG110404 T9215 insert directly via Metav Werkzeuge or ask our consultants if needed. FNMG110404 T9215 turning insert by Tungaloy — CVD‑coated carbide, 0.4 mm radius The FNMG110404 T9215 is an ISO‑standard rhombic turning insert designed for medium steel machining; it delivers a balance of wear resistance and fracture toughness for continuous to lightly interrupted cuts. ISO rhombic insert FNMG110404 T9215 CVD‑coated carbide for wear resistance 0.4 mm nose radius for precise profiles Double‑sided chipbreaker with cylindrical hole Productivity and wear performance for medium‑steel turning The CVD‑coated carbide grade T9215 combines high wear resistance with reliable fracture toughness, which translates into stable tool life and consistent part quality in medium‑steel applications. As a result, throughput can be increased under continuous or lightly interrupted cutting conditions, while downtimes for tool changes are reduced. The coating enhances resistance to abrasive wear and maintains cutting‑edge integrity, supporting sustained high productivity on shopfloor turning operations. Easy integration with ISO toolholding systems The insert follows ISO dimensions and a rhombic form, which simplifies stocking and matching with standard holders. Compatibility with a given toolholder is determined by form, clearance angle, tolerance class, fastening, size and thickness; the FNMG shape and the 0° clearance specification ensure predictable seating and orientation in appropriate external or internal turning holders. The central cylindrical hole supports secure clamping, while the double‑sided chipbreaker provides two usable edges per face, improving cost efficiency per indexable edge. Geometry and chip control for better surface quality A 0.4 mm nose radius offers a compromise between profile accuracy and edge strength: it enables fine surface finish on external profiles while preserving sufficient edge robustness for intermittent engagement. The rhombic plate form and double‑sided breaker contribute to reliable chip control, reducing the risk of surface marking and easing chip evacuation. Combined with a plate thickness of 4.76 mm and standard 11 mm plate size, the insert provides mechanical stability that benefits repeatability and dimensional consistency in serial turning tasks. For precise, productive medium‑steel turning choose the Tungaloy FNMG110404 T9215 insert and contact Metav Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6799572 Manufacturer SKU: TUN6799572 Label / SKU: 6799572-Tungaloy Series: ISO‑Drehwendeschneidplatten Material: Carbide Facts Plate designation: 110404 Plate size: 11 mm Plate thickness: 4.76 mm Nose radius: 0.4 mm Clearance angle: 0° Included hole: cylindrical Wedge/angle: 50° Special features Grade: T9215 (CVD‑coated carbide) Plate form: rhombic (FNMG) Chipbreaker: double‑sided Application: external and internal turning Holder compatibility: determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert suitable for? The FNMG110404 T9215 insert is optimised for medium‑grade steels; the T9215 CVD coating offers wear resistance and fracture toughness appropriate for continuous to lightly interrupted cuts in steel. Can the insert be used for both external and internal turning? Yes, the rhombic FNMG geometry and secure clamping via the cylindrical hole make the insert suitable for both external and internal turning applications when paired with the correct ISO toolholder. How does the 0.4 mm nose radius affect component finish? A 0.4 mm nose radius provides a good balance between surface finish and edge strength, improving profile accuracy while maintaining robustness against slight interruptions in the cut. What advantages does the double‑sided chipbreaker offer? The double‑sided chipbreaker doubles the available cutting edges per index, improving cost efficiency and enabling consistent chip formation for better process stability. Is the insert compatible with standard ISO holders? The FNMG110404 follows ISO dimensions; compatibility depends on matching form, clearance angle, tolerance class, fastening method, size and thickness to the holder specification. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
FNMG 110404 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated cemented carbide in grade T9215 and a double-sided chipbreaker assures high productivity and consistent edge life in medium steel turning; order the insert directly via Metav Werkzeuge or consult the in-house experts for application advice. FNMG 110404 T9215 rhombic turning insert by Tungaloy — CVD-coated cemented carbide, 50° geometry The FNMG110404 T9215 is an ISO rhombic turning insert designed for general external and internal turning of medium steels, providing a balance of wear resistance and fracture toughness for productive, continuous to light interrupted cuts. CVD-coated cemented carbide grade T9215 Optimised for medium steel turning Double-sided chipbreaker, rhombic shape 50° cutting geometry with cylindrical hole Increased throughput for medium steel turning The CVD-coated cemented carbide substrate in grade T9215 delivers a targeted combination of wear resistance and toughness that supports higher cutting speeds and longer tool life in medium steel machining. The insert’s double-sided chipbreaker is engineered to control chip formation, which reduces interruptions and helps maintain consistent surface quality. Together with the 50° cutting geometry, this makes the component particularly suitable for production environments where steady productivity and low variance between parts are priorities. Durable edge stability for predictable tool life The design emphasises edge strength and predictable performance under steady loads. A moderate corner radius 0.4 mm contributes to improved edge stability and reduced risk of fracture under intermittent light interruptions, while the 0° free angle supports robust engagement in external and internal turning. The CVD-coated surface reduces adhesion and flank wear, extending useful life of the insert and lowering frequency of index changes in batch production. Reliable fitting and secure clamping in ISO systems Conformance to ISO form and sizing ensures interchangeability with standard toolholders; compatibility depends on form, free angle, tolerance class, fastening method, size and thickness. The insert is rhombic with an 11 mm inscribed circle and a 4.76 mm plate thickness, and it is supplied with a cylindrical hole for secure fixing. These mechanical details facilitate rapid, repeatable seat and clamp processes on compatible holders, reducing set-up time and enhancing process stability. Practical machining guidance for consistent results Select the chipbreaker and grade according to workpiece material, machining type and machine/tool stability; the grade is ideal for continuous and light interrupted cuts in medium steel. Where higher stability and finish are required, favour conservative feed rates and ensure correct seat and screw torque on the holder to exploit the insert’s productivity advantages. For internal turning, choose appropriate overhang and support to maintain cutting stability and take full advantage of the insert’s wear properties. For reliable, high-productivity turning with T9215-grade inserts, contact Metav Werkzeuge for availability and tailored application advice — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: 6799569 Manufacturer SKU: TUN6799569 Model series: ISO turning inserts Grade: T9215 Material: Cemented carbide Core specifications Inscribed circle: 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Free angle: 0° Cutting angle: 50° Hole style: Cylindrical hole (with hole) Design and special features ISO-indexable rhombic insert CVD-coated cemented carbide Double-sided chipbreaker Suitable for external and internal turning Optimised for medium steel, continuous to light interrupted cuts Compatibility determined by holder form, tolerance and fastening FAQ What materials is this insert intended for? The FNMG110404 T9215 insert is intended primarily for medium steel machining and is optimised for continuous and light interrupted cutting conditions. Is the insert reversible or single-use per edge? The insert is double-sided with a chipbreaker on both faces, allowing indexable use of multiple cutting edges before replacement. What are the key dimensions to check for holder compatibility? Check the inscribed circle (11 mm), plate thickness (4.76 mm), corner radius (0.4 mm), and the 50° geometry when matching the insert to a compatible ISO holder. How does the CVD coating affect performance? The CVD coating on the cemented carbide grade reduces adhesion and flank wear, improving edge stability and extending tool life under typical steel turning conditions. Can this insert be used for interrupted cuts? Yes; the grade and geometry are suited to continuous and light interrupted cuts, though heavy interruptions require assessment of workpiece and setup stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110404 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a robust CVD-coated carbide grade and the proven FNMG geometry for dependable medium to heavy steel turning; the insert’s double-sided design and ISO compatibility reduce tooling costs and downtime. Order the FNMG110404 T9225 insert via Metav Werkzeuge or request advice from the consultants for optimal toolholder pairing. FNMG 110404 T9225 – Turning insert FNMG for medium to heavy steel by Tungaloy A FNMG110404 T9225 turning insert designed for ISO-compliant external and internal turning applications, offering a tough CVD-coated carbide grade for changing cutting conditions and light interruption. CVD-coated cemented carbide grade T9225 Suitable for medium to heavy steel turning Rhombic FNMG form with 0.4 mm corner radius Double-sided chipbreaker with cylindrical hole Robust cutting performance for demanding steel turning The CVD-coated cemented carbide grade T9225 combines toughness and wear resistance to handle variable engagement and slightly interrupted cuts common in workshop and production environments. The coating improves abrasion resistance while the substrate maintains edge integrity under load; this balance enables consistent metal removal rates and contributes to longer edge life. As a result, the insert supports higher productivity and predictable tool-change intervals, which are advantageous in batch and continuous turning operations. Geometry and dimensions that ensure stable, repeatable results The FNMG geometry provides a 50° approach angle that reduces cutting forces and improves surface finish in many turning tasks. With an 11 mm inscribed circle and a thickness of 4.76 mm, the insert fits standard FNMG holders; the 0.4 mm corner radius supports robust edge strength without compromising form accuracy. The cylindrical bore and the specified clearance of 0° are compatible with common clamping systems, so accurate seat and clamping deliver repeatable positioning and concentricity during external and internal turning. Economical operation through double-sided design and chip control A double-sided insert with a dedicated chipbreaker offers two indexed cutting edges per side, extending service life and reducing cost per edge. The integrated chipbreaker promotes stable chip formation and evacuation in steel turning, which lowers the risk of built-up edge and improves surface consistency. Selecting the appropriate chipbreaker and the T9225 grade according to workpiece material and cut conditions maximises economy and reduces unscheduled stoppages for regrinding or replacement. Practical system setup and application guidance This ISO-series insert is intended for use in a complete system comprising an ISO insert seat, a matching external holder or boring bar, plus a shim/clamp set and replacement screws as required. Typical tasks include external and internal turning; the robust universal grade performs well where varying depth of cut or intermittent engagement occurs. For best results, pair the insert with a toolholder that matches the FNMG form and tolerance class and verify clamping torque and seat cleanliness before machining. Contact Metav Werkzeuge for technical recommendations on holder selection, cutting data and availability of the Tungaloy FNMG110404 T9225 insert Technical data Article number: 6799582 SKU: 6799582-Tungaloy Manufacturer SKU: TUN6799582 Series: ISO-Drehwendeschneidplatten Designation: FNMG110404 Label: FNMG110404 T9225 Tungaloy-Wendeplatte Facts Size (inscribed circle): 11 mm Thickness: 4.76 mm Corner radius: 0.4 mm Approach angle: 50° Clearance angle: 0° Hole: with cylindrical hole Special features Material: cemented carbide Grade/coating: T9225, CVD-coated carbide Plate form: rhombic (FNMG) Chipbreaker: double-sided Intended application: turning (external and internal) System components: ISO insert, compatible external holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert designed for? This Tungaloy FNMG110404 T9225 insert is optimised for medium to heavy steel turning where toughness and wear resistance are required. Can the insert be used for interrupted cuts? Yes. The T9225 grade is formulated to cope with slightly interrupted cuts and changing engagement conditions, offering improved edge stability. How does the double-sided design affect cost-efficiency? A double-sided FNMG insert provides multiple indexed edges, reducing cost per cutting edge and extending the service interval before replacement. Which toolholder is required for correct compatibility? Compatibility depends on FNMG form, relief angle, tolerance class, fastening method, size and thickness; use an ISO FNMG external holder or boring bar that matches these parameters for proper seating. Is the coating type suitable for high-speed cutting? The CVD-coated carbide construction of this insert improves wear resistance at elevated cutting speeds typical for steel turning, while retaining toughness for variable conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110404 T9225 Wendeplatten - Tungaloy
Taking advantage of the CVD-coated carbide grade T9225 and the ISO FNMG geometry ensures robust performance for medium to heavy steel turning; the 0.4 mm corner radius and double-sided chipbreaker support secure edge strength and reliable chip control. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific cutting data. FNMG 110404 T9225 – ISO FNMG turning insert for medium to heavy steel (Tungaloy) A FNMG 110404 T9225 indexable insert designed for ISO-compliant external and internal turning operations, offering a universal CVD-coated carbide grade for variable engagement and interrupted cuts. CVD-coated carbide for enhanced tool life Universal grade T9225 for mid-to-heavy steel ISO FNMG geometry; fits standard holders 0.4 mm corner radius for robust edge strength Consistent performance under variable cutting conditions The CVD-coated T9225 grade combines a wear-resistant surface with sufficient toughness for changing entry conditions and lightly interrupted cuts. As a cemented carbide insert intended for turning, it provides a balance between wear resistance and fracture toughness, which translates into longer tool life and fewer unexpected tool changes. For production runs that include mixed batches or varying material batches, this universal grade reduces process variance and supports predictable cycle times. Secure fit and predictable replacement in ISO systems Compatibility is defined by form, clearance angle, tolerance class, fastening, size and thickness; the rhombic ISO FNMG format ensures straightforward interchangeability with standard external holders and boring bars. The insert features a cylindrical hole and a plate thickness of 4.76 mm, with a nominal size designation of 11 and an included angle of 50°, enabling stable clamping and reproducible seating. The overall system comprises the insert, a matching outer holder or boring bar, a shim/clamp set and fastening screws, which together deliver consistent clamping force and repeatable cutting geometry. Effective chip control and edge stability for efficient turning Equipped with a double-sided chipbreaker, the insert promotes controlled chip segmentation and evacuation in continuous and interrupted turning tasks, which helps maintain surface quality and protect the cutting edge. The 0.4 mm corner radius increases edge strength and reduces the risk of chipping during heavy engagement, while the insert’s geometry supports a good surface finish when machining steel. In practice, using this grade with appropriate cutting parameters and a matching holder results in improved process reliability and reduced secondary operations. Contact Metav Werkzeuge for tailored cutting data, availability of genuine Tungaloy FNMG 110404 T9225 inserts and expert guidance on holder selection; eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number: 6799585 Manufacturer SKU: TUN6799585 Brand: Tungaloy Facts Corner radius: 0.4 mm Plate thickness: 4.76 mm Size: 11 Included angle: 50° Free clearance angle: 0° Special features ISO FNMG110404 geometry CVD-coated cemented carbide (T9225) Rhombic plate form Cylindrical hole Double-sided chipbreaker Suitable for external and internal turning Universal grade for mid-to-heavy steel; suited to variable engagement and lightly interrupted cuts FAQ What materials is this insert suitable for? This insert, the FNMG 110404 T9225 from Tungaloy, is specified as a universal grade for mid-to-heavy steel machining and performs well under varying engagement and lightly interrupted cuts. How does the chipbreaker affect the machining result? The double-sided chipbreaker on the FNMG 110404 T9225 promotes controlled chip segmentation and evacuation, improving surface finish and reducing the risk of chip-related interruptions. Which holder types are compatible with this insert? Compatibility depends on the holder form, clearance angle, tolerance class, fastening method, size and thickness; the ISO FNMG geometry is designed to fit standard external holders and boring bars that accept FNMG inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
FNMG 110408 AH6225 Wendeplatten - Tungaloy
FNMG 110408 AH6225 – ISO-Drehwendeschneidplatte zum Drehen | Tungaloy FNMG 110408 AH6225 Tungaloy-Wendeplatte für universellen Einsatz beim Außen- und Innendrehen, ausgelegt auf rostfreien Stahl und mittlere Bearbeitungsbedingungen Universelle Sorte für rostfreien Stahl PVD-beschichtetes Hartmetall für stabile Schneidkante Rhombische Platte, 11 mm, mit zylindrischem Loch Freiwinkel 0° und 50° Hauptwinkel für stabile Schnitte Doppelseitiger Spanbrecher für wirtschaftliche Nutzung Präzise Schneidewerkstoffwahl für rostfreie Anwendungen Die Sorte AH6225 ist ein PVD-beschichtetes Hartmetall, das speziell für die Bearbeitung von rostfreiem Stahl entwickelt wurde. Die Beschichtung sorgt für eine scharfe und zugleich stabile Schneidkante, die bei mittleren Schnitttiefen und wechselnden Bedingungen die Standzeit verbessert. Anwender profitieren von konstanter Bearbeitungsqualität und reduzierten Ausfallzeiten, weil der Schneidstoff auf Prozesssicherheit und zuverlässige Spanbildung ausgelegt ist. Kompatibilität und einfache Integration in bestehende Systeme Als ISO-genormte Drehwendeschneidplatte ist die FNMG110408 einfach in vorhandene Halter integrierbar; die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Durch die standardisierte Ausführung reduziert sich die Rüstzeit, und das Umrüsten auf passende Außenhalter oder Bohrstangen gelingt schnell. Für eine optimale Leistung sollte Spanbrecher und Sorte passend zum Werkstoff und zur Bearbeitungsart gewählt werden. Konstruktionsmerkmale für produktive Zerspanung Die Platte hat eine rhombische Form mit 11 mm Plattengröße und 4,76 mm Plattendicke, einen Eckenradius 0,8, einen Freiwinkel von 0° sowie einen Hauptwinkel von 50°. Die Ausführung mit Loch und zylindrischem Lochstil sowie der doppelseitige Spanbrecher ermöglichen flexiblen Einsatz und wirtschaftliche Nutzung durch beidseitige Verwendbarkeit. Diese Geometrie unterstützt eine stabile Schnittführung und gleichbleibende Oberflächengüte bei Serien und Einzelfertigung. Für produktive und zuverlässige Bearbeitungsprozesse empfiehlt sich der Einsatz der FNMG 110408 AH6225 von Tungaloy; bei technischen Fragen oder Prüfanforderungen steht die Beratung unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 gern zur Verfügung. Technische Daten Artikelnummer: 6947649 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: FNMG110408 AH6225 Herstellerartikelnummer: 6947649 Hersteller SKU: TUN6947649 Daten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 11 mm Hauptwinkel: 50° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: PVD (Dünnschichtbeschichtung) Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch Spanbrecher: doppelseitig Schneidstofftyp: PVD-beschichtetes Hartmetall FAQ Für welche Werkstoffe ist die Platte geeignet? Die FNMG 110408 AH6225 ist speziell für rostfreien Stahl ausgelegt; die Kombination aus Hartmetall und PVD-Beschichtung verbessert Spanbildung und Standzeit bei solchen Werkstoffen. Ist die Platte in handelsübliche Halter einsetzbar? Ja, die ISO-genormte FNMG110408 passt in Halter, deren Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke mit der Platte kompatibel sind. Wie wird der Spanbruch gesteuert? Die Wendeplatte verfügt über einen doppelseitigen Spanbrecher, der je nach Wahl der Bearbeitungsparameter für kontrollierte Spanform und verbesserte Prozessstabilität sorgt. Wie viele Schneidkanten stehen zur Verfügung? Die Ausführung ist doppelseitig nutzbar, sodass beide Seiten der Platte zur Verfügung stehen und die Wirtschaftlichkeit dadurch steigt. Welche Rolle spielt der Freiwinkel 0° bei der Anwendung? Ein Freiwinkel von 0° unterstützt die Stabilität der Schneidkante bei bestimmten Einspann- und Schnittbedingungen und trägt zu konstanter Bearbeitungsqualität bei. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
FNMG 110408 AH6225 Wendeplatten - Tungaloy
Take advantage of a sharp, stable cutting edge combined with the wear resistance of a PVD-coated carbide AH6225 grade for reliable mid-range turning of stainless steels; the ISO-format rhombic geometry and 0.8 mm corner radius ensure consistent profiling and easy indexability. Order the FNMG110408 AH6225 insert directly via Metav Werkzeuge or ask our consultants if needed. FNMG110408 AH6225 — Indexable turning insert, PVD-coated carbide, 50° geometry by Tungaloy The FNMG110408 AH6225 is an ISO-format indexable insert for external and internal turning, offering a universal PVD-coated carbide grade tailored for stainless steels and variable machining conditions *PVD-coated carbide grade AH6225 *ISO rhombic FNMG 50° geometry *0.8 mm corner radius for precise profiling *Double-sided insert with cylindrical hole Consistent edge stability for mid-range stainless-steel turning The PVD-coated carbide grade AH6225 provides a balance between cutting-edge sharpness and robustness, which is especially valuable when machining stainless steels under varying conditions. The coating enhances wear resistance and reduces built-up edge, so the cutting edge stays effective over longer cycles. This translates into steadier surface quality and fewer index changes, supporting continuous production and predictable tool life. Geometry designed for precise contours and reliable seating The rhombic FNMG shape with a 50° included angle and a 0.8 mm corner radius delivers accurate profile definition while the double-sided design reduces tooling costs per cutting edge. The insert’s cylindrical hole and standard thickness ensure secure clamping and repeatable positioning in compatible holders. As a result, the system provides controlled chip formation and stable cutting conditions, reducing vibration and supporting measurable improvements in process stability. ISO format for straightforward system integration and logistics Being an ISO-format indexable insert, the component fits into standard ISO holders when form, clearance angle, tolerance class, fastening, size and thickness match. The ISO format offers clear interchangeability advantages: simplified inventory management, easier tool changes and reduced machine downtime. In practice, this makes the insert suitable for shops that value consistent tooling interfaces and efficient set-up procedures. Practical application advice for turning operations Intended for both external and internal turning, the insert performs best with a chipbreaker and cutting data selected for workpiece stability and the chosen machining strategy. The universal nature of the AH6225 grade means it suits medium cutting conditions and fluctuating requirements; pairing the insert with an appropriate holder and clamping set achieves the best balance between productivity and surface finish. Consider the chipbreaker style and the machine-rigidity when defining feeds and speeds to ensure controlled chip control and reliable tool life. For availability and application advice on Tungaloy’s AH6225 grade, contact Metav Werkzeuge for stock information and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6947653 SKU: 6947653-Tungaloy Manufacturer SKU: TUN6947653 Model series: ISO turning indexable inserts Designation: FNMG110408 AH6225 Tungaloy insert Facts Geometry angle: 50° Corner radius: 0.8 mm Insert thickness: 4.76 mm Size (inscribed circle): 11 mm Clearance angle: 0° Hole: with cylindrical hole Special features Grade: AH6225 Material: carbide Coating: PVD Shape: rhombic (FNMG) Chipbreaker: double-sided Application: external and internal turning Compatibility: ISO-format insert for standard holders and clamping sets FAQ Which materials is this insert best suited for? The AH6225 grade is formulated as a universal solution for stainless steels and performs reliably in medium cutting conditions; the FNMG110408 AH6225 insert is optimised for such applications. Can this insert be used for both external and internal operations? Yes. The insert is designed for external and internal turning, provided the holder and set-up match the insert’s ISO geometry and thickness. What does the designation FNMG110408 indicate? The FNMG code denotes a rhombic ISO shape with a 50° included angle; the numeric portion 110408 relates to size and thickness parameters such as the 11 mm inscribed circle and 4.76 mm thickness, together with the 0.8 mm corner radius. How is compatibility with a tool holder determined? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; matching these parameters ensures correct seating and repeatable performance with the FNMG110408 AH6225 insert. Which chipbreaker and cutting strategy should be selected? Select a chipbreaker and cutting data based on workpiece material, machining type and machine stability; the AH6225 grade offers broad applicability, so a chipbreaker matched to stainless-steel turning and stable clamping typically delivers the best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com