SNMG 120408 AT9530 Wendeplatten - Tungaloy
Data inconsistency detected: the field "material" indicates "Hartmetall" (cemented carbide) while the cutting-grade field specifies a coated cermet AT9530. This discrepancy could lead to potential issues in manufacturing or application, as the material properties and performance characteristics of cemented carbide and coated cermet differ significantly. Please verify the product specifications for SKU 6773699 before further processing to ensure accuracy and avoid potential operational errors or mismatches in the production workflow. Confirming the correct material and cutting grade is essential to maintain product quality, meet customer requirements, and prevent any delays or complications in the supply chain or end-use application.
SNMG 120408 GH330 Wendeplatten - Tungaloy
Benefit from a combination of wear-resistant GH330 grade, robust carbide construction and a precise 0.8 mm corner radius to improve process stability and surface finish in turning operations; order the original insert through Metav Werkzeuge or request application advice from our consultants. SNMG120408 GH330 Tungaloy turning insert — square 12 mm, 0.8 mm radius SNMG120408 GH330 is a square ISO-rated turning insert for external and internal turning, designed for reliable chip control and repeatable edge stability in a wide range of machining tasks Tungaloy GH330 grade for wear resistance Square 12 mm insert, 0.8 mm corner radius Double-sided chipbreaker for reliable chips Carbide substrate with cylindrical hole Improved tool life and cutting-edge stability with GH330 The GH330 carbides are formulated to combine wear resistance and toughness, enabling consistent performance in interrupted and continuous cuts. Built on a solid carbide substrate, the geometry balances edge stability and fracture resistance so that high metal removal rates can be sustained without premature edge breakdown. This results in a measurable reduction in tool changes and predictable tool lifetime, supporting efficient production scheduling and reduced machine downtime. The material and grade selection are engineered to complement the insert geometry, providing a pragmatic trade-off between abrasion resistance and chipping tolerance. Fast, error-free tool changes thanks to ISO conformity As an ISO turning indexable insert, the SNMG120408 is intended for systems composed of an insert, a matched external holder or boring bar, and the appropriate shim/clamp and screws. Compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness; these parameters are standardised to simplify toolholder selection and to enable quick, repeatable insert exchanges. The 0° relief angle and square form ensure predictable seating and orientation in holders that accept SNMG geometry, making setup times shorter and reducing the risk of misalignment-related defects. Geometry and chip control that support surface quality The combination of a double-sided chipbreaker and a 0.8 mm corner radius delivers controlled chip formation and improved surface finish on turned parts. The insert’s square 12 mm outline provides four usable cutting edges, enhancing economy per indexation, while the cylindrical hole secures reliable clamping in compatible holders. For external and internal turning tasks, selecting the correct chipbreaker and grade tailored to the workpiece material and machining stability will result in consistent surface quality and efficient swarf evacuation, particularly in medium- to heavy-duty turning operations. For technical consultation or to secure original Tungaloy SNMG120408 GH330 inserts, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6806755 Manufacturer SKU: TUN6806755 SKU: 6806755-Tungaloy Core dimensions ISO designation: 120408 Insert form: square Plate size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 90° Design & special features Material: carbide Grade/coating: GH330 Chipbreaker: double-sided Hole style: cylindrical hole Application: turning Model series: ISO turning indexable inserts FAQ What materials is this insert suitable for? The SNMG120408 GH330 insert is a general-purpose carbide grade designed for a broad material range; selection of the chipbreaker and machining parameters should be matched to the specific workpiece material to optimise performance. How is the insert secured in the toolholder? The insert uses a cylindrical hole and is clamped into compatible holders or boring bars in accordance with the SNMG form and ISO tolerances to ensure stable seating and repeatable orientation. How many usable edges does the insert provide? As a square ISO insert, it offers four cutting edges per indexable piece; the double-sided chipbreaker allows reuse of both sides where the holder permits. Is the SNMG120408 GH330 suitable for internal turning? Yes, the insert’s geometry and chip control make it suitable for both external and internal turning tasks when installed in an appropriate boring bar or holder and combined with suitable process parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 GH330 Wendeplatten - Tungaloy
Benefit from the combination of the GH330 carbide grade, a 0.8 mm corner radius and a secure cylindrical‑hole clamping for consistent external and internal turning operations; these attributes support stable chip control and long tool life. Order the SNMG120408 GH330 Tungaloy indexable insert directly via Metav Werkzeuge or consult our specialists for selection support. SNMG120408 GH330 indexable insert for turning — Tungaloy, 0.8 mm radius, double-sided chipbreaker The SNMG120408 GH330 indexable insert is an ISO‑standard square insert designed for external and internal turning, combining a wear‑resistant carbide grade with a double‑sided chipbreaker and cylindrical hole for secure clamping. ISO form SNMG120408 GH330 carbide grade Double-sided chipbreaker Cylindrical hole for secure clamping Greater process reliability through matched geometry and grade The insert is manufactured to ISO dimensions and a defined geometry that ensures repeatable seating in modern holders. The ISO‑standard form and a square plate outline with a 90° included angle provide predictable cutting conditions for many turning operations. Because compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness, the insert integrates into a system consisting of a matching outside holder or boring bar, a shim/clamping kit and replacement screws. This system approach reduces setup variance and increases process stability. Long tool life from a carbide grade balanced for wear and toughness Tungaloy’s GH330 grade combines wear resistance with edge stability to extend service intervals in continuous turning. The substrate is cemented carbide, engineered to withstand abrasive and adhesive wear while maintaining a robust cutting edge. The result is fewer indexings per component batch and reduced downtime for insert changes, which improves overall productivity in workshop and production settings. Controlled chip formation and surface quality with a double-sided breaker The double‑sided chipbreaker design supports consistent chip control on both cutting edges, which is especially beneficial for changing cutting directions or when indexable inserts are rotated to new edges. The built‑in chip control contributes to safer swarf management, more uniform cutting forces and an improved surface finish, enabling efficient machining of internal and external profiles using the same insert geometry. Precise dimensions and reliable clamping for repeatable performance Key dimensions such as the 0.8 mm corner radius and 4.76 mm plate thickness are important for edge strength and seat fit. The cylindrical hole provides a positive location for clamping force in compatible toolholders, reducing the risk of movement under load. Together, these features support reproducible results when paired with correctly rated holders and clamping sets, helping to maintain tolerances and extend toolholder life. Contact Metav Werkzeuge today for tailored tool recommendations or to request compatibility guidance for the SNMG120408 GH330 Tungaloy insert; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6806746 SKU: 6806746-Tungaloy Manufacturer SKU: TUN6806746 Model series: ISO indexable turning insert series Facts Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Included angle: 90° Relief angle: 0° Hole: with cylindrical hole Special features Grade: GH330 Material: cemented carbide Form: square Chipbreaker: double-sided Application: turning (external and internal) ISO designation: SNMG120408 With cylindrical hole for secure clamping FAQ Is this insert compatible with standard SNMG holders? Compatibility is determined by the holder form, relief angle, tolerance class, clamping and plate thickness; the SNMG120408 GH330 Tungaloy insert fits ISO‑standard SNMG holders when those parameters match. What benefits does the GH330 grade provide? The GH330 grade used in the SNMG120408 insert offers a balance of wear resistance and edge stability, extending edge life and supporting consistent surface quality in turning operations. Can the insert be used for both external and internal turning? Yes, the SNMG120408 GH330 indexable insert is suitable for external and internal turning when mounted in the appropriate outside holder or boring bar and clamped correctly. How does the double-sided chipbreaker affect productivity? The double-sided chipbreaker on the SNMG120408 insert provides reliable chip control on both cutting edges, reducing swarf issues and enabling longer runs with fewer indexings. What should be checked when fitting this insert to a toolholder? Check form fit, relief angle, tolerance class, clamping method, plate size (12 mm) and thickness (4.76 mm) to ensure safe seating and repeatable performance with the SNMG120408 GH330 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 GH330 Wendeplatten - Tungaloy
Benefit from the combination of GH330 wear resistance, precise ISO geometry and a stable cutting edge for dependable turning performance; order the SNMG120408 GH330 insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMG120408 GH330 SNMG Turning insert — double-sided chipbreaker, 0.8 mm radius (Tungaloy) SNMG120408 GH330 indexable turning insert for external and internal turning with ISO‑standard form and secure clamping ISO‑standard square geometry GH330 wear‑resistant grade Double‑sided chipbreaker Cylindrical hole for secure clamping Engineered for stable, repeatable turning results The insert is manufactured from carbide and specified as grade GH330, combining wear resistance and edge stability for demanding turning operations. The ISO-conforming geometry ensures repeatable seat and clamping in compatible tool holders; this reduces set‑up variation and supports consistent component quality. The square plate form and 90° included angle deliver versatile orientation for both external and internal passes while the 0.8 mm corner radius enables reliable edge strength for semi‑finishing and finishing cuts. Productivity and cost‑efficiency in everyday machining A double‑sided chipbreaker design extends usable edges, lowering tool cost per cutting edge and reducing changeovers. The 4.76 mm plate thickness and robust construction contribute to vibration dampening and longer in‑process life, which in turn decreases downtime and scrap rates. Cylindrical hole mounting provides secure clamping, maintaining concentricity and minimising run‑out. These practical advantages translate into faster cycle times and more predictable machining results on the shop floor. Choosing the right setup for optimal performance Select the chipbreaker and grade according to workpiece material, machining stability and intended operation; the cutting geometry must match the holder by form, clearance angle, tolerance class, clamping method, size and thickness. The insert forms part of a system comprising the indexable insert, a matching external holder or boring bar, the proper clamp/seat and replacement screws. For unfamiliar materials or mixed production runs, appraising clamping rigidity and feed rates will safeguard the edge life and surface finish. For order placement or application support regarding the Tungaloy GH330 grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and availability Technical data Article number: 6806760 SKU: 6806760-Tungaloy Manufacturer SKU: TUN6806760 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Dimensions & geometry Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 90° Rake angle: 0° Hole: with cylindrical hole Plate form: square Materials & features Material: carbide Grade: GH330 Chipbreaker: double‑sided Application: Turning Compatibility criteria: form, clearance angle, tolerance class, clamping, size, thickness System components: indexable insert, compatible holder/boring bar, clamp/seat and screws FAQ What turning tasks is this insert designed for? This SNMG120408 GH330 indexable insert is intended for external and internal turning; selection of chipbreaker and grade depends on workpiece material and stability. How does the chipbreaker design affect tool life? The double‑sided chipbreaker increases the number of usable edges and supports controlled chip formation, which helps extend service life under appropriate cutting conditions with the GH330 grade. Which holder features are required for correct compatibility? Compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness; ensure the toolholder matches the ISO geometry of the insert. Does the insert require a special clamping arrangement? The cylindrical hole and square plate form allow secure clamping in standard square pockets with the correct clamp/seat and fastening screws for repeatable clamping forces. What performance benefits does the GH330 grade provide? The GH330 grade balances wear resistance and edge stability to offer reliable cutting behaviour, especially where consistent surface quality and economical edge life are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 GH330 Wendeplatten - Tungaloy
Benefit from the GH330 carbide grade and the economical double-sided chipbreaker for consistent, long-running turning operations; the square 12 mm format with a 0.8 mm corner radius ensures stable edge engagement and simple indexing. Order the insert directly via Metav Werkzeuge or consult our advisors for application matching. SNMG 120408 GH330 — Tungaloy SNMG indexable insert for turning, 12 mm, 0° relief SNMG120408 GH330 is an ISO-standard square indexable insert designed for external and internal turning where wear resistance and cutting-edge stability are essential ISO-standard square insert SNMG 12 mm GH330 grade for wear resistance and toughness Double-sided chipbreaker for longer use 0° relief angle, 0.8 mm corner radius Consistent component life through tailored grade and geometry The SNMG120408 GH330 indexable insert pairs a purpose-designed geometry with the GH330 carbide formulation to deliver a balance of wear resistance and toughness. The square format with a measured 12 mm side and 0.8 mm corner radius provides predictable contact conditions and supports consistent surface quality during turning. The ISO standardisation guarantees repeatable fitment in compatible holders and reduces uncertainty when specifying inserts for production runs, supporting stable cycle times and fewer unscheduled tool changes. Higher productivity via double-sided indexing and robust carbide A double-sided chipbreaker extends usable cutting edges and reduces tooling costs per component by allowing multiple reindexes. The carbide substrate maintains edge integrity under intermittent heavy cuts, while the 0° relief reduces flank contact where geometry and machine setup permit. These characteristics translate into measurable efficiency: longer intervals between insert changes and reliable edge behaviour under varying feed and depth conditions — advantages that improve throughput without sacrificing part tolerances. Clear system compatibility for reliable clamping and set-up Compatibility with a clamping system is determined by insert shape, relief angle, tolerance class, fastening method, size and thickness. The insert is supplied with a cylindrical hole for positive locating and secure fastening in a range of standard external holders or boring bars. Typical system components include the matching external holder or boring bar, the seat or clamp set and replacement screws. Specifying the ISO designation and geometric data when ordering ensures correct seating and repeatable cutting geometry, which in turn supports predictable tool life and process reliability. Practical guidance for selection and application Designed for general turning tasks, the insert performs best when the chipbreaker and GH330 grade are chosen to match the workpiece material, cutting parameters and machine stability. The double-sided chip control helps manage chip flow and cutting forces, while the square outline provides four usable cutting corners per side where applicable. For detailed matching of grade, chipbreaker and cutting data to a particular component or machine, Metav Werkzeuge can provide specification support and further technical details. Contact Metav Werkzeuge to discuss application requirements or to place an order for the Tungaloy GH330 SNMG120408 indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice Technical data Article number: 6806769 SKU: 6806769-Tungaloy Manufacturer SKU: TUN6806769 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 90° Hole style: cylindrical With hole: yes Chipbreaker: double-sided Special features Material: carbide Grade: GH330 Geometry: square insert Application: turning (external and internal) System components: holder, clamp set, replacement screws ISO designation: SNMG120408 FAQ What machining tasks is this insert designed for? The SNMG120408 GH330 indexable insert from Tungaloy is designed for external and internal turning applications where a balance of wear resistance and edge stability is required. How is the insert secured in a holder? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the SNMG120408 uses a cylindrical hole for location and secure clamping in standard turning holders or boring bars. What advantages does the GH330 grade provide? The Tungaloy GH330 grade offers an engineered balance of wear resistance, toughness and cutting-edge stability, resulting in predictable tool life and robust performance under varied turning conditions. Is the insert indexable and does it reduce tooling costs? Yes; the double-sided chipbreaker and square geometry permit multiple reindexes, extending usable cutting edges and lowering tooling cost per part. Which key dimensions should be specified when ordering? Provide the ISO designation SNMG120408, size (12 mm), thickness (4.76 mm), corner radius (0.8 mm), relief angle (0°) and manufacturer article number 6806769 to ensure correct match and fitment. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 GT720 Wendeplatten - Tungaloy
Take advantage of the GT720 cermet grade for superior surface finish and consistent wear resistance, combined with the ISO SNMG120408 geometry for reliable compatibility with standard turning holders; order directly via Metav Werkzeuge or consult our technical team for application support. SNMG120408 GT720 Tungaloy insert — ISO turning insert for finishing steel The SNMG120408 GT720 Tungaloy insert is an ISO-format, square, indexable turning insert designed for finishing to light machining of steel, delivering consistent surface quality and dimensional control. Cermet grade GT720 for fine finishing ISO SNMG geometry, 90° cutting angle 0.8 mm corner radius for consistent profile Double-sided insert with cylindrical hole Optimised finishing performance for consistent surface quality The cermet-based GT720 grade is tuned for finishing and light machining of steel, emphasising surface quality and dimensional stability. Cermet combines high hot hardness and favourable wear behaviour to reduce built-up edge and promote uniform flank wear, which helps maintain tolerances over extended runs. This results in fewer rework cycles and steadier component quality when precise profiles and fine surfaces are required. Stable geometry that simplifies holder compatibility and set-up The ISO SNMG120408 geometry with a 90° cutting face and a 0° clearance angle provides predictable engagement and a neutral cutting direction, suitable for many external and internal turning tasks. The 0.8 mm corner radius supports consistent contouring without excessive cutting forces, while the square form and cylindrical centre hole ensure firm clamping in standard ISO external holders and boring bars. Compatibility is governed by insert form, clearance angle, tolerance, fastening, size and thickness, enabling straightforward integration into existing tool systems. System-level advantages that support productivity and repeatable results As part of a complete turning system — insert, matching external holder or boring bar, support pad/clamping set and replacement screws — this grade and geometry help standardise process parameters across batches. The 4.76 mm plate thickness and 12 mm inscribed circle yield rigid seating and repeatable tool offsets, and the double-sided chipbreaker extends usable life per index. Selecting the chipbreaker and grade to suit workpiece stability and machining strategy reduces cycle time variability and contributes to predictable tool-change intervals. For reliable finishing results with the SNMG120408 GT720 Tungaloy insert, contact Metav Werkzeuge for tailored application advice or availability — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6851513 Manufacturer SKU: TUN6851513 SKU: 6851513-Tungaloy Facts Inscribed circle: 12 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Cutting angle: 90° Special features Carbide substrate Cermet / coated cermet grade GT720 ISO SNMG120408 geometry Square plate form Double-sided chipbreaker Cylindrical centre hole Recommended for turning (finishing to light machining of steel) Compatibility with standard ISO external holders and boring bars FAQ Is this insert suitable for finishing steel? Yes. The SNMG120408 GT720 Tungaloy insert is specifically designed for finishing and light machining of steel, prioritising surface finish and dimensional accuracy. Which holders fit this ISO insert? Compatibility is achieved with ISO-format external holders or boring bars that match the insert form, clearance angle, tolerance class, fastening method, size and thickness specified for SNMG120408. What are the key geometry and size data to note? Key data include a 12 mm inscribed circle, 4.76 mm thickness, 0.8 mm corner radius and a 90° cutting angle; these dimensions determine seating rigidity and cutting behaviour. What material and grade does the insert use? The insert is manufactured on a carbide substrate and supplied in the GT720 cermet grade, suitable for fine finishing applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 GT9530 Wendeplatten - Tungaloy
Combining the wear-resistant GT9530 cermet grade with a 0.8 mm corner radius and a 0° relief angle yields finer surface finishes and longer tool life in stable turning operations; order the SNMG120408 GT9530 directly via Metav Werkzeuge or ask our consultants if needed. SNMG 120408 GT9530 – Coated cermet indexable insert for turning (Tungaloy) The SNMG120408 GT9530 is an ISO-format, square indexable insert designed for turning where surface finish and extended edge life are required. Coated cermet grade GT9530 for fine finishes 0.8 mm corner radius for reliable edge strength Square 12 mm size with 4.76 mm thickness Double-sided chipbreaker for flexible indexing Higher-quality surfaces with longer edge life The combination of a coated cermet substrate and the GT9530 grade delivers a noticeable improvement in finished surface quality while extending tool life under consistent cutting conditions. Cermet contains finely dispersed ceramic phases within a metal binder, which reduces built-up edge and gives a cleaner cut on steels. The result is fewer reworks and a steadier production rhythm when facing and light turning tasks, with predictable wear behaviour that supports planning and throughput. Consistent performance and process reliability Engineered for stable setups, the insert’s 0° relief angle and square geometry provide robust seating in compatible holders and even load distribution across the cutting edge. The double-sided chipbreaker enables two usable edges per index, supporting cost-effective part runs. In applications where rigidity and repeatability matter, the grade’s wear resistance and the insert’s dimensional tolerances help maintain part quality over longer tool cycles, improving overall process efficiency. Mounting, compatibility and handling guidance Compatibility with a toolholder is governed by form, relief angle, tolerance class, fixation, size and thickness. The ISO designation 120408 simplifies holder selection: a matching SNMG pocket, correct clamp or screw and the specified insert thickness (4.76 mm) guarantee correct fit. The cylindrical hole variant requires the appropriate clamp or screw set; ensure the retention parts and seating are free of debris to avoid premature edge chipping. Indexing is straightforward thanks to the square plate form, offering predictable repositioning for a fresh cutting edge. Material suitability and application advice This grade is optimised as a wear-resistant finishing to light general-purpose option for steel where a superior surface and longer life are desired under stable cutting conditions. The coated cermet chemistry favours fine feeds and moderate cutting speeds, producing low built-up edge and good surface integrity. For heavier roughing or unstable setups, a more robust geometry or different grade should be considered to preserve edge integrity and machine uptime. For tailored advice on integrating the SNMG120408 GT9530 into production, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss toolholder compatibility and optimal cutting parameters. Technical Data Article number: 6998095 Manufacturer SKU: 6998095-Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: 120408 Grade: GT9530 Material: cemented carbide Coating: coated cermet Size: 12 mm Thickness: 4.76 mm Plate form: square Corner radius: 0.8 mm Relief angle: 0° Hole: with hole Hole style: cylindrical hole Chipbreaker: double-sided Application: turning Facts Angle: 90° SKU (manufacturer): TUN6998095 Special features Double-sided chipbreaker for two usable edges Coated cermet grade optimised for finishing ISO-standard geometry for broad holder compatibility Robust seating dimensions for repeatable clamping FAQ What materials is this insert suited for? The SNMG120408 GT9530 insert is optimised for steel applications; the coated cermet composition favours finishing and light universal turning tasks. How is the insert mounted in a holder? The SNMG120408 format requires a matching SNMG pocket with the correct clamp or screw; the cylindrical hole design demands compatible retention hardware and correct seating to ensure stability. What does the GT9530 grade offer compared with standard grades? GT9530 is a wear-resistant cermet grade designed to deliver improved surface finish and extended edge life under stable cutting conditions compared with conventional carbide finishing grades. How many cutting edges are available per insert? Due to the square form and double-sided chipbreaker, the insert provides multiple indexing options; each side offers usable edges until the grade's wear limit is reached. Is the SNMG120408 GT9530 suitable for roughing operations? The insert is primarily a finishing to light universal grade; for heavy roughing or unstable setups, a more robust geometry or different grade is recommended to avoid premature wear. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 GT9530 Wendeplatten - Tungaloy
High wear resistance and a fine surface finish make the SNMG120408 GT9530 ideal for stable turning operations; benefit from longer tool life and reproducible component quality — order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. SNMG120408 GT9530 indexable turning insert for ISO-standard finishing – Tungaloy A SNMG120408 GT9530 indexable insert for ISO-standard turning, engineered for finishing and light universal machining of steel components. SNMG120408 format for ISO-standard holders Coated cermet grade GT9530 for longer life Double-sided chipbreaker for consistent chips Square insert with 0.8 mm nose radius Consistent finishing and extended tool life The coated cermet grade GT9530 provides a balance between wear resistance and surface integrity, making it suitable for finishing cuts under stable conditions. The coating reduces flank wear and enables longer intervals between indexings, which supports production continuity and lowers lifecycle costs. For operations demanding good surface quality on steel, the insert’s material and coating combination delivers measurable improvements in repeatability and component appearance. Accurate fit and practical fixture guidance Designed as an ISO-standard insert, the SNMG120408 ensures compatibility with ISO holders when form, clearance angle, tolerance class, fastening, size and thickness are matched. The square plate geometry and the 90° main cutting angle enable predictable engagement in outside and inside turning. The specified 0° clearance and the 0.8 mm nose radius are factors to consider when selecting depth of cut and feed for finishing passes to maintain dimensional accuracy and edge stability. Effective chip control and application range The double-sided chipbreaker balances chip formation for finishing and light universal turning, promoting stable evacuation and reduced vibration. Manufactured from cemented carbide, the insert resists abrasive wear and maintains cutting-edge integrity under consistent cutting conditions. Typical applications include external and internal turning of steel components where a fine surface finish and longer tool life are priorities; choose the chipbreaker and grade to match the workpiece material and machine stability. Practical notes on setup and substitution Compatibility depends on insert form, thickness (4.76 mm), size (12 mm), hole style and mounting; the SNMG120408 comes with a cylindrical centre hole for secure fastening. When replacing tools, ensure the holder tolerances and clamping parts are suitable to preserve cutting geometry and to avoid chattering. For cutting-data or application-specific recommendations, technical enquiries can be directed to Metav Werkzeuge by email or phone. For robust finishing in steel applications, contact Metav Werkzeuge to discuss using the Tungaloy SNMG120408 GT9530 for improved surface quality and longer machining intervals — Metav Werkzeuge can advise on holder compatibility and cutting parameters. Technical data Article number: 6998093 Manufacturer SKU: TUN6998093 SKU: 6998093-Tungaloy Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Key figures Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Main cutting angle: 90° Clearance angle: 0° Special features Coating/grade: GT9530 (coated cermet) Material: cemented carbide Shape: square indexable insert Chipbreaker: double-sided Hole: cylindrical hole Application: turning, finishing and light universal operations FAQ What materials is this insert intended for? The SNMG120408 GT9530 is specified as a wear-resistant finishing to light universal grade for steel machining, offering good surface quality under stable cutting conditions. Which holders are compatible with the SNMG120408? Compatibility depends on holder form, free/clearance angle, tolerance class, fastening method, size and thickness; the SNMG120408 fits ISO-standard holders designed for square inserts with a cylindrical centre hole. How many cutting edges are available per insert? With a double-sided, square design, the insert provides multiple usable edges; the number of effective edges depends on indexing strategy and the chosen clamping arrangement. What advantage does the GT9530 coating offer in everyday production? The GT9530 coated cermet combines improved wear resistance with fine surface results, extending intervals between interventions and supporting consistent production quality. Is this insert suitable for internal and external turning? Yes, the insert is intended for both outside and inside turning; select the appropriate chipbreaker and mounting setup to match the application and machine stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 KS20 Wendeplatten - Tungaloy
Benefit from a combination of wear-resistant KS20 grade, carbide construction and ISO-form compatibility to secure consistent cutting performance and predictable tool life. Order the SNMG120408 KS20 insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. SNMG120408 KS20 — SNMG indexable turning insert for turning (Tungaloy) A SNMG120408 KS20 insert designed for general turning tasks, offering ISO-standard form, a double-sided chipbreaker and a cylindrical locating hole for repeatable clamping. ISO-standard SNMG120408 form KS20 wear-resistant carbide grade Double-sided chipbreaker for stable chips Cylindrical locating hole for secure clamping Reliable ISO form for consistent production results The SNMG geometry follows the ISO-standard SNMG120408 form, which simplifies tool selection and changeover across compatible holders. The carbide substrate combined with the KS20 grade provides a controlled balance of wear resistance and toughness, resulting in longer tool life and reduced downtime. Because the insert is produced to standard tolerances, mounting accuracy and repeatability are improved, supporting predictable cutting forces and stable part tolerances in series production. Stable chip control and robust edge for productive turning Equipped with a double-sided chipbreaker and a cylindrical locating hole, the insert delivers dependable chip formation and secure clamping under varying cutting conditions. The 0° clearance geometry creates a neutral cutting action that supports heavy roughing as well as general finishing passes, while the 0.8 mm corner radius increases edge strength to withstand interrupted cuts. These features together help to maintain a consistent surface finish and lower the risk of premature edge failure, especially when machining steels and cast materials. Practical choice for workshop flexibility and service support Designed for turning applications, the insert integrates into a simple system: an ISO insert, a compatible external holder or boring bar, a clamp plate and the correct fastening screw. Selection of the right chipbreaker and grade should be matched to the workpiece material and machining strategy to achieve best results. For further assistance on matching holders, selecting cutting data or optimising tool life, Metav Werkzeuge provides technical guidance and specification support to keep production running efficiently. For application advice or to order the SNMG120408 KS20 from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and fast supply. Technical Data Article number: 6806767 SKU: 6806767-Tungaloy Manufacturer SKU: TUN6806767 Manufacturer article number: 6806767 Material: Carbide Facts Corner radius: 0.8 mm Thickness: 4.76 mm Size: 12 mm Free angle: 0° Included hole: cylindrical locating hole Shape: square Geometry ISO code: 120408 Angle: 90° Special features ISO SNMG120408 form KS20 grade Double-sided chipbreaker For turning applications Compatible with ISO external holders and boring bars System components: insert, clamping plate, screw and support FAQ What materials is this insert suitable for? The SNMG120408 KS20 insert is intended for turning and the KS20 grade provides a balance of wear resistance and toughness, making it suitable for a broad range of steels and general turning applications. How does the cylindrical hole benefit clamping? The cylindrical locating hole ensures repeatable seating and secure clamping in compatible holders, improving positional accuracy and reducing the likelihood of movement under load when using the SNMG120408 KS20. What does the 0° clearance mean in practice? A 0° clearance produces a neutral cutting action that enhances edge stability for heavier cuts; combined with the 0.8 mm corner radius, this supports robust performance during roughing and general turning tasks. Is the insert reversible or single-use? The insert is double-sided with a chipbreaker on each usable edge, allowing rotation to a fresh cutting corner; correct handling and mounting extend usable life for the SNMG120408 KS20. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 NS520 Wendeplatten - Tungaloy
Benefit from a finishing-focused cermet grade combined with ISO‑standard SNMG geometry for consistent surface quality and predictable wear behaviour; obtain the SNMG inserts directly via Metav Werkzeuge or consult our specialists for application matching. SNMG 120408 NS520 indexable turning insert – for turning, Tungaloy A SNMG120408 NS520 cermet indexable insert designed for finishing and light cutting operations in turning, offering stable wear and improved surface integrity. Cermet grade NS520 for finishing ISO SNMG geometry for broad compatibility Double-sided insert with cylindrical hole 0° clearance angle for precise contact Achieve reliable finishing and repeatable dimensions The insert is engineered around the NS520 cermet composition to deliver a balance between surface quality and tool life. In finishing passes, the fine-grained cermet helps maintain a consistent edge, reducing the need for rework and supporting tighter tolerances. The SNMG form follows ISO standards, so compatibility with a wide range of external holders and boring bars is predictable; selection is based on holder shape, clearance, tolerance class, attachment method, size and thickness. This makes the insert a pragmatic choice for job shops and production lines that prioritise dimensional control and consistent component finish. Secure clamping and operational stability for turning Designed as a double-sided plate with a cylindrical hole, the insert provides secure seating and the opportunity to index the second cutting edge when required. The square plate form and 90° included angle allow stable engagement in both external and internal turning operations, while the small 0.8 mm corner radius supports fine contour work and controlled cutting edge contact. Together, these attributes reduce vibration and support predictable chip formation, which is particularly useful when optimising cycle times without compromising surface integrity. Material behaviour and process advantages of NS520 cermet The NS520 grade suits finishing to light machining of steels, focusing on smooth wear patterns and excellent surface finish. Compared with coarse grades, this cermet promotes uniform abrasion rather than chipping, which helps preserve nominal dimensions over multiple indexings. The insert is available in uncoated or coated cermet variants depending on the chosen specification, allowing process engineers to select the best option for cutting speed and workpiece material. Where improved edge life and consistent results are required, the NS520 grade reduces unexpected downtime and contributes to predictable tool-change intervals. Practical selection and process integration When integrating the insert into an existing tool set, check holder compatibility for form, free angle, tolerance class, fastening method, size and thickness. The ISO designation simplifies filter and search operations when specifying tooling kits for a given machine station. For finishing cycles, pair this insert with a rigid holder and stable workholding to exploit the cermet’s tendency for even wear; when light machining is needed, the same geometry allows flexibility in feed and speed adjustments without sacrificing surface quality. Contact Metav Werkzeuge to discuss application matching for the Tungaloy NS520 SNMG inserts; our consultants will recommend the correct holder interface and grade choice — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 Technical data Article number: 6806718 Manufacturer SKU: TUN6806718 SKU: 6806718-Tungaloy Brand: Tungaloy Facts ISO designation: 120408 Geometry: SNMG (square plate) Inscribed circle: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 90° Clearance angle: 0° Hole: with hole Hole style: cylindrical Special features Grade: NS520 (cermet / coated cermet) Double-sided indexable plate Designed for external and internal turning ISO‑standardised turning insert Focus on finishing and light machining of steel FAQ How does this insert differ from standard carbide finishing inserts? The NS520 cermet insert combines cermet edge properties with the SNMG ISO geometry; unlike many standard carbide grades, NS520 focuses on even wear and superior surface finish during finishing passes. Is the SNMG120408 NS520 compatible with existing SNMG holders? Yes, the SNMG120408 NS520 follows ISO SNMG geometry; compatibility depends on holder form, clearance, tolerance class, fastening and thickness, all of which should be checked against the holder specification. Can the insert be used for both external and internal turning? The SNMG120408 with its square form and 90° included angle is suitable for external and internal turning applications where finishing or light machining is required. What is the corner radius and why does it matter? The insert has a corner radius of 0.8 mm which supports fine contouring and helps manage cutting forces during finishing, improving part surface quality and dimensional stability. Is the NS520 available coated? The NS520 is offered as a cermet grade and can be supplied as a coated cermet variant depending on the selected specification and application needs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp uncoated cermet grade (NS9530) and ISO conformity for efficient finishing on steel; the insert’s low cutting forces and double-sided chipbreaker support stable, high-quality turning operations. Order directly via Metav Werkzeuge or ask our consultants for holder compatibility. SNMG120408 NS9530 Tungaloy turning insert (ISO 120408) — finishing for turning The SNMG120408 NS9530 is a Tungaloy finishing insert designed for precision turning of steel components, optimised for continuous cuts and small depths of cut. Sharp cermet grade NS9530 for finishing Low cutting forces for stable turning Double-sided chipbreaker for consistent chips ISO SNMG120408 format with cylindrical hole Achieve consistent high-quality surfaces with a finishing cermet The uncoated NS9530 cermet is engineered for a sharp cutting edge and low cutting forces, which together yield improved surface quality and reduced risk of built-up edge when turning steel. As a finishing grade, it is particularly suited to continuous cuts and small depths of cut where surface integrity and dimensional accuracy matter. The material behaviour of cermet provides a stable cutting edge that supports repeatable results, making it a reliable choice for shops focused on component finish and reduced secondary operations. Proven ISO format and secure clamping for fast tool changes Packaged in the ISO SNMG format, the insert matches widely used external holders and boring bars when the holder’s form, relief angle, tolerance class, fixing method, size and thickness correspond. The insert’s square shape, cylindrical hole and double-sided design allow two usable cutting edges per index, improving stock efficiency. The system comprises the insert, a compatible external holder or boring bar, a support shim or clamp set and replacement screws; selecting the correct combination reduces downtime and simplifies inventory management while ensuring secure clamping and concentricity. Practical process gains and setup guidance for manufacturers By using the SNMG120408 NS9530 in appropriate finishing conditions, operations typically see lower vibration, steadier chip formation and reduced rework rates. The double-sided chipbreaker promotes predictable chip control, and the 0° relief specification suits specific holder geometries where minimal clearance is required. For best results, match the chipbreaker and grade to the workpiece and machining stability; when in doubt about holder compatibility or recommended cutting data, Metav Werkzeuge provides technical advice and supplementary specifications via email or phone to support process planning and tool selection. Contact Metav Werkzeuge to secure SNMG120408 NS9530 inserts for precision finishing on steel or to request holder compatibility advice Technical Data Article number: 6998183 SKU: 6998183-Tungaloy Model series: ISO turning inserts Item name: SNMG120408 NS9530 Tungaloy insert Facts Corner radius: 0.8 mm Insert size: 12 mm Plate thickness: 4.76 mm Included hole: with cylindrical hole Included angle: 90° Relief (clearance) angle: 0° Special features Grade: NS9530 (uncoated cermet) Schneidstofftyp: uncoated cermet Shape: square Chipbreaker: double-sided Application: turning Suitable for continuous cuts and small depths of cut ISO designation: SNMG120408 Hole style: cylindrical FAQ What material is this insert best suited for? The SNMG120408 NS9530 insert is a finishing grade optimised for steel; its uncoated NS9530 cermet provides a sharp edge and low cutting forces suitable for precision turning of steel components. How does the chipbreaker affect machining? The double-sided chipbreaker on this SNMG insert promotes consistent chip formation and controlled evacuation, improving surface finish and reducing the likelihood of entanglement during continuous cuts. Is this insert compatible with existing SNMG holders? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; the ISO SNMG120408 format allows use in standard SNMG holders when specifications match. How many edges are usable per insert and what is the benefit? The square, indexable design provides two usable cutting edges per side (depending on orientation), enabling cost-effective indexing and reduced tooling costs compared with single-edged options. What technical support is available for cutting data and holder selection? Metav Werkzeuge can advise on cutting parameters and holder compatibility for the SNMG120408 NS9530 insert; contact details are provided for further technical assistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 NS9530 Wendeplatten - Tungaloy
Take advantage of NS9530 cermet performance and the ISO‑standard SNMG geometry for reliable finishing in turning operations; the combination of a 0.8 mm corner radius and a double‑sided chipbreaker supports stable cuts and consistent surface quality. Order directly via Metav Werkzeuge or contact our consultants for application advice. SNMG120408 NS9530 indexable turning insert — uncoated cermet, 0.8 mm radius — Tungaloy The SNMG120408 NS9530 is an ISO‑standard indexable insert designed for fine finishing in external and internal turning, offering a sharp cutting edge and predictable chip control for steel machining SNMG 120408 geometry for standard ISO holders NS9530 cermet for superior surface finish Double‑sided chipbreaker for extended life Achieve superior surface finish with low cutting forces The uncoated cermet grade NS9530 is formulated for finishing applications where a sharp cutting edge and minimal cutting forces produce smoother component surfaces. Cermet combines ceramic hardness with metallic toughness, which reduces built‑up edge and improves consistency on continuous cuts and small depths of cut. For machining steel, this results in reduced vibration and improved dimensional control, so machined parts meet tight surface‑quality demands without excessive tool pressure. Secure fit and ISO compatibility for predictable performance The ISO SNMG120408 geometry and square plate form deliver broad compatibility with standard indexable turning holders. Key mechanical dimensions such as the 12 mm plate size, 4.76 mm thickness and a 90° included angle ensure predictable seating and clamping. Compatibility is determined by form, relief angle, tolerance class, fastening and plate thickness; selecting a matching holder and correct clamping torque reduces runout and preserves the insert’s sharp cutting edge, supporting repeatable production cycles. Stable chip control and process reliability A double‑sided chipbreaker provides effective chip formation for finishing cuts, creating short, controllable chips that improve machine safety and surface quality. The uncoated nature of the grade makes it especially suited to continuous cutting at light depths of cut, where thermal stability and a sharp edge matter most. Choosing the appropriate chipbreaker and grade according to workpiece stability and machining strategy enhances tool life and lowers the risk of interrupted cuts, contributing to steady production throughput. Contact Metav Werkzeuge for tailored application support, technical data or a recommendation for the Tungaloy SNMG120408 (SKU TUN6944759) to ensure optimal cutting results Technical Data Article number: 6944759 SKU: 6944759-Tungaloy Manufacturer SKU: TUN6944759 Model series: ISO‑Drehwendeschneidplatten WPL designation: SNMG120408 Facts Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Relief angle: 0° Included angle: 90° Hole style: cylindrical hole Special features Cutting material: uncoated cermet (NS9530) Chipbreaker: double‑sided Plate form: square Application: turning (external and internal) Compatibility: ISO SNMG dimensions and clamping systems FAQ Which materials is this insert best suited for? The SNMG120408 NS9530 insert is optimised for steel finishing operations; the NS9530 cermet grade offers a sharp edge and low cutting forces suited to continuous cuts and small depths of cut. Can the insert be used for both external and internal turning? Yes, the geometry and square form of the SNMG120408 make it suitable for both external and internal turning when paired with an appropriate ISO holder. How does the double‑sided chipbreaker influence performance? The double‑sided chipbreaker on this Tungaloy insert promotes controlled, short chips in finishing passes, improving surface quality and reducing the likelihood of chip entanglement. What should be considered when selecting a holder for this insert? Choose a holder that matches the SNMG120408 geometry, relief angle and plate thickness; correct clamping and tolerance class ensure stable seating and repeatable cutting performance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120408 NS9530 Wendeplatten - Tungaloy
Take advantage of the sharp cutting edge and low cutting forces of this uncoated cermet finishing insert together with its ISO‑standard SNMG geometry for consistent surface quality and predictable tool life. Order directly via Metav Werkzeuge or consult our technical advisors for application matching. SNMG120408 NS9530 Tungaloy indexable insert — ISO turning insert for finishing steel, uncoated cermet The SNMG120408 NS9530 is an ISO‑standard turning insert designed for finishing steel, offering a sharp cutting edge, low cutting forces and a 0.8 mm corner radius for improved surface quality. ISO‑standard SNMG120408 form Uncoated cermet grade NS9530 Sharp edge for superior surface finish Double‑sided chipbreaker, cylindrical hole Consistent finishing with a low‑force cermet grade The uncoated cermet grade NS9530 is formulated for finishing operations on steel, delivering a sharp cutting edge and reduced cutting forces. These properties result in a finer contact between tool and workpiece, which lowers vibration and improves repeatable surface finish in continuous cuts and shallow depths of cut. Cermet, a composite of ceramic and metallic binders, combines the wear resistance of ceramics with improved edge toughness, making it particularly suitable for high‑quality facing and light turning. ISO compatibility and geometry for stable set‑ups The SNMG120408 form is an ISO‑standard square insert with a 12 mm inscribed circle dimension, a 0.8 mm corner radius and a plate thickness of 4.76 mm; the included angle is 90° and the clearance angle is 0°. The insert features a cylindrical centre hole and a double‑sided chipbreaker, enabling two indexed cutting edges per insert. These standardised dimensions ensure straightforward compatibility with appropriately specified holders and boring bars; correct matching of holder form, clearance and tolerance class ensures secure clamping and minimises runout during turning. Operational benefits for productive finishing Using this indexable insert in finishing applications reduces the need for secondary passes by delivering a high‑quality first‑pass finish and consistent edge behaviour. The combination of the cermet grade and the geometry supports predictable tool wear and repeatable results across batches, which benefits cycle‑time planning and quality control. Selecting the correct chipbreaker and ensuring machine‑workpiece rigidity will extend insert life and maintain surface integrity; for unstable set‑ups, a different chipbreaker or increased support may be advised. For application advice or to procure genuine Tungaloy SNMG120408 NS9530 inserts, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com; our technical advisors will assist with grade and chipbreaker selection. Technical Data Article number: 6998187 Manufacturer SKU: TUN6998187 Manufacturer: Tungaloy Dimensions & measurable data Corner radius: 0.8 mm Inscribed circle / size: 12 mm Plate thickness: 4.76 mm Included angle: 90° Clearance angle: 0° Hole style: cylindrical Materials & special features Material: cemented carbide Grade: NS9530 (uncoated cermet) Application: turning (finishing steel) Chipbreaker: double‑sided Plate shape: square Mounting: with cylindrical hole FAQ What machining tasks suit this insert best? The SNMG120408 NS9530 is optimised for finishing operations on steel, delivering a sharp cutting edge and low cutting forces for high surface quality in continuous, light cuts. How many cutting edges are available per insert? Due to the double‑sided chipbreaker and square plate form, the insert provides two indexable cutting edges, allowing rotation to a fresh edge when required. Is the insert coated? The NS9530 grade is an uncoated cermet; it is formulated to provide a fine cutting edge and superior surface finish without a coating layer. Which holder characteristics must be checked for compatibility? Compatibility is determined by holder form, clearance angle, tolerance class, clamping method, insert size and thickness; ensure the holder matches the SNMG120408 ISO form. What are the key geometry values to consider during set‑up? Important measurable values are the 12 mm inscribed circle, 4.76 mm plate thickness, 0.8 mm corner radius and the 90° included angle; these affect reach, depth of cut and insert clearance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMG 120408 NS9530 Wendeplatten - Tungaloy
Product data conflict detected: the material field lists "Hartmetall" while the grade is specified as an uncoated cermet (NS9530); unable to generate a reliable product description due to the inconsistency between the specified material type and the grade classification, which creates ambiguity in determining the correct attributes, properties, and potential applications of the product, making it challenging to provide accurate information for users or customers who rely on precise and consistent data for decision-making, product selection, or usage scenarios, as the conflicting details could lead to misunderstandings or errors in interpretation, ultimately impacting the reliability and usability of the product information provided.
SNMG 120408 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing with the uncoated NS9530 cermet grade and the robust SNMG geometry for consistent surface quality and reduced cutting forces; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. SNMG 120408 NS9530 turning insert (ISO) by Tungaloy — finishing cermet, 0° relief SNMG120408 NS9530 is an ISO-design turning insert intended for precision external and internal turning, optimised for finishing steel with continuous cuts SNMG120408 geometry for ISO turning Uncoated cermet NS9530 for fine finishing 0.8 mm corner radius for smooth surface Achieve high-quality finishes with a dedicated cermet grade The uncoated cermet grade NS9530 is designed specifically for finishing steel, offering a sharp cutting edge that reduces cutting forces and improves surface integrity. As a finishing grade, the material composition favours low built-up edge formation and consistent micro-geometry retention, which leads to fewer passes and less rework. The combination of the SNMG insert shape and the sharp edge makes this solution particularly suitable for continuous cuts and small depths of cut, delivering reliably high surface quality in production and toolroom environments. Consistent compatibility and reliable clamping for stable turning Compatibility with toolholders is determined by the insert’s form, relief angle, tolerance class, clamping method, size and thickness. This ISO-format square insert features a 0° relief angle, a nominal approach angle of 90°, and a 4.76 mm plate thickness, ensuring predictable seating in standard external holders and boring bars. The insert’s cylindrical hole and tolerance-compliant dimensions support secure clamping and repeatable positioning, which contributes to reduced vibration and improved process stability. Selecting holders and clamping kits that match these specifications ensures safe, repeatable operation on CNC lathes and manual turning centres. Practical shopfloor advantages and recommended applications Designed for external and internal turning, the SNMG geometry with a double-sided chipbreaker provides two usable cutting edges per index, increasing economy and uptime. For finishing operations on steel, the uncoated cermet reduces the need for frequent edge preparation and helps maintain a fine surface finish across series production. Given its characteristics, the insert is best applied where continuous cutting and small feed or depth parameters are required; choosing the correct chipbreaker and grade in line with workpiece rigidity and cutting parameters will deliver the intended productivity and surface quality benefits. For unusual materials or intermittent cuts, assessment of suitability is recommended to ensure optimal tool life. For technical selection and orders of Tungaloy SNMG120408 NS9530 finishing inserts contact Metav Werkzeuge for tailored advice and prompt availability — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6998194 Manufacturer SKU: TUN6998194 Manufacturer: Tungaloy Numbers / Core technical data Geometry designation: 120408 Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 12 mm Relief/frees angle: 0° Approach angle: 90° Special features / Versions Material: cemented carbide Grade/coating: NS9530 (uncoated cermet) Plate form: square Hole: with cylindrical hole Chipbreaker: double-sided Typical application: turning (external and internal) Model series: ISO turning inserts FAQ Is this insert suitable for finishing steel? Yes. The SNMG120408 in NS9530 is a finishing cermet grade specifically developed for finishing steel with low cutting forces and a sharp edge. How many cutting edges are available per insert? The insert is double-sided with a double-sided chipbreaker, allowing two indexed cutting edges to be used for economical turning. What holder compatibility should be observed? Compatibility depends on the insert form, relief angle, tolerance class, clamping and thickness; matching these parameters to the toolholder ensures correct seating and stable operation with the SNMG120408 NS9530 insert. Can this insert be used for internal boring as well as external turning? Yes. The geometry and 90° approach angle permit both external and internal turning applications when combined with a suitable boring bar or holder. What distinguishes the NS9530 grade from coated alternatives? NS9530 is an uncoated cermet finishing grade that maintains a sharp edge and reduces built-up edge during continuous cuts, offering superior surface finish for small depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 NS9530 Wendeplatten - Tungaloy
Combining a sharp, uncoated cermet cutting edge with a compact r0.8 corner radius delivers high-quality finishing on Stahl; the ISO-compliant geometry ensures straightforward integration into standard turning tool systems. Order the SNMG120408 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNMG 120408 NS9530 Tungaloy turning insert — finishing grade for turning A SNMG120408 NS9530 Tungaloy turning insert engineered for precision finishing of Stahl components in continuous cut conditions SNMG 120408 geometry for precision finishing Uncoated Cermet NS9530 with sharp cutting edge Double-sided chipbreaker for continuous cuts Square insert with r0.8 corner radius High-precision finishing thanks to a cermet finish grade The SNMG120408 is an ISO-standard turning insert designed as a finish grade for machining Stahl. Its uncoated cermet composition (NS9530) provides a consistently sharp cutting edge and low cutting forces, which together reduce vibration and promote excellent surface integrity. For operations with small depths of cut and continuous feeds, this combination translates into fewer secondary operations and reliable part tolerances. The form-fit and tolerance class align with conventional ISO holders, so integration into existing turning setups is straightforward. Predictable chip control and edge behaviour for productive cycles Equipped with a double-sided chipbreaker, the insert supports stable chip formation in steady cutting conditions, improving process repeatability and reducing risk of built-up edge. The uncoated cermet substrate retains a keen geometry that is particularly effective in producing mirror-like finishes on turned parts. This yields practical advantages in production: shorter cycle times due to less finishing, lower scrap rates, and a more consistent surface quality across batches. Where finishing standards are critical, the material combination and geometry work together to deliver measurable process reliability. Compatibility and handling for workshop use The insert is a square format with a corner radius of r0.8, a plate thickness of 4.76 mm and an included angle of 90°, paired with a cylindrical hole for secure clamping. The specified 0° relief ensures the intended cutting geometry when matched with the correct holder; compatibility depends on the holder’s form, relief angle, tolerance class, fastening method, size and thickness. The double-sided design allows a second indexing position, extending usable life per insert and simplifying inventory management. For best results, select the chipbreaker and grade according to the machine rigidity and workpiece stability. Contact Metav Werkzeuge for tailored application advice on Tungaloy finishing inserts or request a recommendation for specific turning setups via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer item number: 6998195 SKU: 6998195-Tungaloy Manufacturer SKU: TUN6998195 Manufacturer: Tungaloy Facts Size designation: 12 Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 90° Relief angle: 0° Hole: cylindrical Special features ISO turning insert designation SNMG120408 Grade: NS9530 Cutting material: uncoated cermet Material backing: cemented carbide Chipbreaker: double-sided Plate form: square Application: turning (finishing) FAQ What applications suit this insert best? The SNMG120408 NS9530 Tungaloy turning insert (SKU 6998195-Tungaloy) is intended for finishing operations in turning, especially continuous cuts and small depths of cut on Stahl where a sharp edge and low cutting forces are required. Is the insert indexable and how many cutting edges are available? Yes, the square geometry with a double-sided chipbreaker provides multiple usable edges; the design allows a second indexing position to extend service life before disposal. Which holder features must be checked for compatibility? Ensure the holder matches the ISO form, relief angle (0° specified), tolerance class, fastening method, plate size and thickness; these factors determine correct seating and cutting geometry. Can the insert be used for interrupted cuts or roughing? The NS9530 uncoated cermet is a finishing grade optimised for continuous cuts; for interrupted cuts or heavy roughing, choose a grade and chipbreaker tailored to higher impact and stability demands. How does the uncoated cermet affect surface finish compared with coated grades? Uncoated cermet grades like NS9530 preserve an exceptionally sharp cutting edge, which improves surface integrity during finish turning; coatings can benefit wear resistance but may blunt the initial edge for certain finish applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the specification lists the component material as “Hartmetall” (cemented carbide) while the cutting-grade information identifies an uncoated cermet (NS9530). Because these two entries contradict each other on the core material, a reliable, production-ready product description cannot be generated. Please confirm whether the insert is cemented carbide or cermet and provide the corrected material and grade details to enable a precise technical description, as this clarification is essential for ensuring accurate documentation, avoiding potential errors in production, and maintaining consistency in the technical specifications provided to all relevant stakeholders involved in the manufacturing and quality assurance processes.
SNMG 120408 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, low cutting forces and ISO compatibility to keep turning operations productive and consistent; the combination of the NS9530 finishing grade, sharp cutting geometry and robust carbide substrate ensures high surface quality in continuous cuts. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. SNMG 120408 NS9530 — ISO turning insert (finishing) by Tungaloy A SNMG120408 NS9530 turning insert designed for finishing steel with a sharp cutting edge, low cutting forces and excellent surface quality. SNMG120408 ISO turning insert for finishing Uncoated cermet grade NS9530 for steel Sharp cutting edge for low cutting forces Double-sided chipbreaker, 0.8 mm corner radius Reliable finishing performance for steel turning The insert is an ISO‑standard square turning plate manufactured from cemented carbide and specified as an uncoated cermet grade NS9530. This combination is tailored to finishing operations on steel, delivering a sharp cutting edge and reduced cutting forces that translate directly into improved surface quality and stable machining at small depths of cut. As a finishing grade, the material is optimised for continuous cuts; the double-sided chipbreaker supports controlled chip formation, which lowers the risk of re-cutting and maintains consistent part appearance. Precise geometry and secure clamping for repeatable results Compatibility with toolholders follows the ISO system: fit is determined by insert form, relief angle, tolerance class, fastening method, size and thickness. Important dimensions are 12 mm insert size, 4.76 mm thickness, 0.8 mm corner radius and a 0° clearance angle with an included angle of 90°; the insert features a cylindrical centre hole for positive seating. These geometric details support stable clamping and repeatable indexing, reducing set‑up time and variation between cycles. Clear dimensional data simplifies holder selection and ensures the insert mounts correctly in a wide range of ISO-compatible carriers. Productivity advantages and application guidance In practice, the uncoated cermet NS9530 excels where a fine surface finish and low cutting force are priorities. The sharp edge reduces cutting energy and can help extend tool life when feeds and speeds are adjusted for finishing cuts. Manufacturers aiming for consistent part appearance in serial production will value the insert’s ability to produce smooth surfaces on continuous cuts. For users requiring adaptation to specific turning strategies or unusual steel grades, technical guidance is available to match cutting data and chipbreaker variants to machining stability and stock removal requirements. Contact Metav Werkzeuge today to discuss application-specific cutting data for Tungaloy finishing inserts and to identify the ideal insert and holder combination for the intended turning task. Technical data Article number: 6998181 Manufacturer SKU: TUN6998181 Model series: ISO turning inserts Designation: SNMG120408 Brand: Tungaloy Material: carbide Facts Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 90° Hole: cylindrical Special features Grade: NS9530 Cutting material: uncoated cermet Chipbreaker: double-sided Shape: square Application: turning — finishing steel ISO-compliant insert system FAQ Which materials is this insert suitable for? The SNMG120408 NS9530 Tungaloy turning insert is specified as a finishing grade for steel, providing the sharp edge and chip control required for high-quality surface finishes. Can the insert be used for continuous cuts and small depths of cut? Yes; the NS9530 grade is optimised for continuous cutting and small depths of cut, making the SNMG120408 suitable for finishing passes where stability and surface quality are critical. What is the corner radius and how does it affect the finish? The insert features a 0.8 mm corner radius, which balances edge strength and the ability to produce a fine surface finish; a larger radius would increase edge robustness but can alter profile definition. Is the insert coated? No; this SNMG120408 is an uncoated cermet grade (NS9530), selected to provide a sharp cutting edge and low cutting forces in finishing applications on steel. What determines whether the insert fits a particular holder? Compatibility is governed by the ISO form, clearance angle, tolerance class, fastening method, insert size and thickness; ensure the holder matches these dimensions to guarantee correct seating and clamping of the SNMG120408 NS9530 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precision finishing, low cutting forces and standard ISO compatibility for consistent, high-quality turning results; order directly via Metav Werkzeuge or request application advice from our consultants. SNMG 120408 NS9530 — uncoated cermet turning insert for finishing (Tungaloy) The SNMG120408 NS9530 is an ISO-format square turning insert engineered for fine finishing of steel, optimised for continuous cuts and small depths of cut. ISO SNMG 120408 geometry for standard holders Uncoated cermet grade NS9530 for fine finishing 0.8 mm nose radius for superior surface quality Double-sided chipbreaker with cylindrical hole Delivering consistent finishing and reduced cutting forces The insert is designed as a precision finishing solution that combines a sharp cutting edge with a low-friction uncoated cermet grade. This results in reduced cutting forces and stable chip formation during continuous turning operations, which in turn supports improved surface integrity and repeatable part quality. The material choice and geometry are geared towards steady-state cutting rather than heavy roughing, making the component especially suitable where surface finish and dimensional consistency are priorities. Clear guidance on compatibility and system setup Compatibility with toolholders is determined by standard ISO parameters: form, clearance angle, tolerance class, fastening, size and thickness. The insert is supplied in the ISO SNMG 120408 format and therefore fits holders specified for that geometry when the holder’s seating and clamping match the insert’s dimensions. The 0° clearance angle and the 90° included angle should be confirmed against the holder specification to ensure correct seating and effective chip evacuation. Practical handling and indexability benefits Featuring a square form and a double-sided chipbreaker, the insert offers economical indexing: rotating or flipping the insert provides access to fresh cutting edges and extends tool life per insert. The cylindrical hole supports secure clamping and repeatable positioning. Key dimensions are size 12 mm, thickness 4.76 mm and nose radius 0.8 mm, which together influence rigidity, allowable feed per revolution and achievable surface finish; the larger nose radius helps blend tool marks, while the modest radius value keeps cutting forces moderate for fine finishing. Application scope and recommended use The uncoated NS9530 grade is optimised for machining steel in finishing conditions with small depths of cut and continuous chip flow. Its sharp edge geometry reduces built-up edge and is particularly effective where light cutting forces and excellent surface aesthetics are required. For different workpiece materials or interrupted cuts, a different chipbreaker or grade should be selected to match thermal and mechanical demands. If further clarification on suitability for a specific application is required, technical consultation is recommended to align grade and geometry with the intended cutting conditions. For precise finishing with a trusted Tungaloy solution, contact Metav Werkzeuge for application advice or to place an order — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss delivery and compatibility. Technical data Article number: 6998279 Vendor SKU: 6998279-Tungaloy Manufacturer SKU: TUN6998279 Manufacturer: Tungaloy Core data Size: 12 mm Thickness: 4.76 mm Nose radius: 0.8 mm Clearance angle: 0° Insert angle: 90° Hole style: Cylindrical hole Special features Material: cemented carbide Grade: uncoated cermet NS9530 Geometry: SNMG 120408, square form Chipbreaker: double-sided Application: turning, finishing in steel ISO-format insert FAQ What applications is this insert suited for? The SNMG120408 NS9530 turning insert from Tungaloy is intended for external and internal turning where fine finishing and continuous cuts in steel are required; its design favours small depths of cut and stable surface quality. Is the insert coated or uncoated? This product uses an uncoated cermet grade, NS9530, optimised for a sharp cutting edge and low cutting forces in finishing operations. How should toolholder compatibility be checked? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; holders specified for the ISO SNMG 120408 geometry and a 4.76 mm insert thickness are appropriate when seating and clamping match. How does the nose radius affect the finish? The 0.8 mm nose radius reduces tool mark amplitude and helps achieve a smoother surface while maintaining manageable cutting forces for finishing conditions. How is the insert indexed and clamped? The square, double-sided design with a cylindrical hole enables secure clamping and indexing to access fresh cutting edges, extending the effective life per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of high-precision finishing, ISO compatibility and secure clamping for reliable turning performance; order the insert directly via Metav Werkzeuge or request application advice from our consultants. SNMG120408 NS9530 SNMG turning indexable insert for finishing — Tungaloy The SNMG120408 NS9530 indexable insert is designed for precision finishing of steel in external and internal turning, offering a sharp uncoated cermet grade for continuous cuts and fine surface results. SNMG form ISO 120408 Uncoated cermet NS9530 for finishing 0.8 mm corner radius for fine surface Double-sided chipbreaker and cylindrical hole High-precision finishing for steel with low cutting forces The uncoated cermet grade NS9530 is engineered for finishing applications on steel, delivering a sharp cutting edge and reduced cutting forces that translate into consistent surface quality. Due to its composition, this grade is particularly suitable for continuous turning and small depths of cut where a superior finish and dimensional accuracy are required. The combination of a finely honed edge and cermet wear behaviour reduces the tendency for built-up edge, so machining cycles generate fewer rework operations and more predictable part quality. ISO conformity and secure clamping to ensure process stability As an ISO SNMG insert in the 120408 designation, compatibility with external holders and boring bars depends on form, clearance angle, tolerance class, fastening method, size and thickness. The square 12 mm form and the cylindrical hole provide reliable seat and positive clamping with common SNMG-capable holders. The 90° main geometry and a 0° clearance angle suit a wide range of turning set-ups; selecting a holder with appropriate rigidity and the specified clamping parts (shim and screw) minimises vibration and improves repeatability in batch production. Optimised cycle times and consistent surface results through appropriate selection The modest 0.8 mm corner radius balances edge strength and surface finish, making the insert well suited to fine finishing passes where tolerance and appearance matter. The double-sided chipbreaker allows economical indexing of two effective cutting edges, supporting higher productivity and lower tooling costs per part. For best results, match the chipbreaker and grade to the workpiece material, machining type and machine stability: this approach preserves edge life while maintaining the desired surface integrity and dimensional control. For application-specific advice or to secure a supply of the Tungaloy NS9530 SNMG120408 insert, please contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will advise on holder compatibility and optimal cutting data. Technical Data Article number: 6998179 Manufacturer SKU: TUN6998179 Distributor SKU: 6998179-Tungaloy Facts Geometry angle: 90° Clearance angle: 0° Thickness: 4.76 mm Size: 12 mm Corner radius: 0.8 mm Special features Square plate form Cylindrical hole for clamping Double-sided chipbreaker Uncoated cermet grade NS9530 Application: turning Model series: ISO turning indexable inserts Material: carbide FAQ What materials is this insert intended for? The SNMG120408 NS9530 insert is specified as a finishing grade for steel, offering an edge geometry and cermet behaviour optimised for continuous turning and fine surface finish. How many cutting edges are available per insert? With a double-sided chipbreaker and the square form, the insert allows indexing of multiple cutting edges to extend usable life before replacement. Which holders are compatible with this ISO designation? Holders and boring bars that accept ISO SNMG 120408 geometry and accommodate a 12 mm square plate, 4.76 mm thickness and cylindrical hole will be compatible; ensure holder rigidity and correct clamping components for stability. Is the insert coated? This grade is an uncoated cermet (NS9530), chosen for its sharp edge and finishing performance on steel in continuous-cut conditions. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius offers a balance between edge strength and the ability to produce fine surface finishes with controlled cutting forces in finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 NS9530 Wendeplatten - Tungaloy
Take advantage of a dedicated finishing grade that combines the precision of an uncoated cermet cutting edge with a compact ISO geometry for stable, high-quality turning results; order genuine Tungaloy inserts via Metav Werkzeuge or speak to our advisers for application-specific guidance. SNMG 120408 NS9530 Turning Insert by Tungaloy — uncoated cermet finishing grade, 90° geometry The SNMG120408 NS9530 Tungaloy turning insert is an ISO-standard indexable insert designed for precise external and internal turning, optimised for finishing cuts on steel with low cutting forces SNMG 120408 NS9530 - uncoated cermet finishing grade Sharp cutting edge for low cutting forces Double-sided chipbreaker, cylindrical hole 0.8 mm corner radius, 90° insert geometry Consistent finishing quality with low cutting forces The NS9530 grade is an uncoated cermet developed as a finishing grade for steel, providing a sharp cutting edge that reduces cutting forces and promotes excellent surface finish on continuous cuts and small depths of cut. This results in more consistent part geometry and reduced need for secondary finishing, supporting efficient production cycles. The modest 0.8 mm corner radius balances edge strength with the ability to achieve fine surface textures, while the neutral clearance geometry aids stable contact during finishing passes. ISO compatibility and reliable clamping for safe operation Manufactured to ISO dimensions, the SNMG120408 form ensures predictable fitment in ISO holders; compatibility depends on insert form, clearance angle, tolerance class, fixing method, size and thickness. The insert features a cylindrical hole for secure screw mounting and a double-sided chipbreaker, enabling indexed use and economical cutting-edge utilisation. System components typically comprise the insert, a matching external holder or boring bar, a shim/clamp set and replacement screws — selected in accordance with the holder design to preserve the intended cutting geometry and tool life. Application guidance to enhance productivity This indexable insert is primarily intended for external and internal turning where finishing quality is the priority. The double-sided chipbreaker supports controlled chip formation on light to moderate feeds; choose the chipbreaker and grade to match workpiece material, machining strategy and machine-tool stability. For continuous cuts and small depths of cut the uncoated cermet excels at delivering consistent dimensional accuracy. For interrupted or heavy-duty conditions, select a more robust geometry or grade to maintain tool life and process reliability. For expert selection or to secure original Tungaloy SNMG120408 NS9530 finishing inserts, contact Metav Werkzeuge for application recommendations and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998191 SKU: 6998191-Tungaloy Manufacturer SKU: TUN6998191 Designation: SNMG120408 NS9530 Tungaloy indexable insert Application: Turning Grade: NS9530 Cutting material type: uncoated cermet Core technical data Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Insert geometry angle: 90° Clearance angle: 0° Special features ISO turning insert, SNMG form Double-sided chipbreaker Cylindrical hole for screw mounting Square insert shape Intended for finishing on steel Compatible with ISO-standard holders; system includes holder, shim/clamp set and screws FAQ What materials is this insert best suited for? The SNMG120408 NS9530 Tungaloy indexable insert is optimised as a finishing grade for steel, delivering a sharp edge and low cutting forces for superior surface finish. Can the insert be used on internal and external turning applications? Yes, the insert form and ISO geometry are suitable for both external and internal turning when mounted in an appropriate holder and matched to the machining conditions. How is the insert mounted and secured in the holder? The SNMG120408 features a cylindrical hole for screw mounting; secure clamping with the correct shim or clamp set preserves the intended cutting geometry and stability. What advantage does the NS9530 uncoated cermet offer over coated grades? The NS9530 uncoated cermet provides a very sharp cutting edge and excellent surface quality in finishing cuts; it is particularly effective in continuous cutting and small depths of cut. Is the insert double-sided and indexable? Yes, the insert has a double-sided chipbreaker, allowing indexing to a fresh edge and economical utilisation of both cutting edges. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the product lists "material" as Hartmetall (cemented carbide) while the cutting grade is specified as uncoated cermet (NS9530). Please verify the material specification before a product description can be generated, as it is essential to ensure that the information provided is accurate and consistent to avoid any potential confusion or errors in the final product details, which could lead to issues in manufacturing, customer satisfaction, or product performance. Clarifying whether the material is indeed Hartmetall or uncoated cermet is crucial for maintaining the integrity of the product's technical specifications and ensuring that all details align correctly.
SNMG 120408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet cutting edge, ISO compatibility and low cutting forces for consistent finishing operations; order the insert directly via Metav Werkzeuge or consult the technical team for process integration. SNMG120408 NS9530 Turning Insert by Tungaloy — finishing for steel components A SNMG120408 NS9530 indexable turning insert designed for precision finishing of steel parts, ISO‑standard square form with cylindrical hole for secure clamping Finishing cermet grade NS9530 Sharp cutting edge for low cutting forces ISO‑standard SNMG120408 geometry Corner radius 0.8 mm for improved surface quality Optimised finishing performance for general turning The insert delivers consistent, high‑quality finishes on steel thanks to the uncoated cermet composition and the finishing‑grade geometry. The NS9530 grade is formulated to produce a sharp, robust cutting edge that reduces built‑up edge and lowers cutting forces; this yields improved surface integrity and more predictable dimensional results during continuous, light cuts. As a result, productivity rises where fine finishing and small depths of cut are required, while tool change frequency is reduced through stable wear behaviour. Reliable fit and simple integration into ISO holder systems Compatibility with common toolholders is ensured by the ISO designation and standard dimensions. The SNMG120408 form, square plate with a cylindrical hole, is compatible with a wide range of external holders and boring bars when matched for seat geometry, clearance angle and thickness. The insert’s 0° clearance specification and 4.76 mm plate thickness support precise axial positioning and repeatable seating, which simplifies setup and shortens machine downtime during indexation. This makes integration straightforward in both manual and CNC turning operations. Material choice and geometry that support surface finish and economy A cermet cutting material provides a balance between hardness and wear resistance, producing finer finishes than many cemented carbides under suitable cutting conditions. The supplied corner radius 0.8 mm helps to distribute cutting loads and to produce consistent surface texture with minimal chatter. The indexable plate is double‑sided with a chipbreaker adapted for light finishing, so each insert can be rotated to use multiple edges, improving cost‑efficiency per edge while maintaining precision finishing throughout the tool life. For purchasing advice or to integrate the Tungaloy SNMG120408 NS9530 insert into production, contact Metav Werkzeuge for tailored recommendations and order support — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 — Metav Werkzeuge can advise on holder compatibility and process parameters Technical data Article number: 6998185 Numbers / Core technical data SKU: 6998185-Tungaloy Manufacturer SKU: TUN6998185 ISO designation: SNMG120408 Grade: NS9530 Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Clearance angle: 0° Included hole: with hole (cylindrical) Insert angle: 90° Designs / Special features Material: Cemented carbide (cermet grade) Geometry: square, double‑sided indexable insert Chipbreaker: double‑sided, finishing style Typical use: turning, external and internal finishing Suitability: continuous cuts and small depths of cut FAQ What applications is this insert intended for? The SNMG120408 NS9530 insert is intended for turning operations, primarily finishing of steel components where low cutting forces and high surface quality are required. How does the NS9530 grade improve surface finish? The uncoated NS9530 cermet composition produces a sharp cutting edge and reduced built‑up edge, which together help to achieve finer surface finishes and consistent dimensional outcomes during continuous cutting. Can the insert be indexed to use multiple edges? Yes, the insert is double‑sided and indexable; rotating the plate provides additional usable edges to improve cost efficiency per cutting edge. Which holders are compatible with this ISO insert? ISO‑standard SNMG geometry allows compatibility with a wide range of external holders and boring bars when matched for form, clearance angle, tolerance class, fastening and thickness. Is this insert suitable for interrupted cuts or heavy roughing? This finishing grade is optimised for continuous cuts and small depths of cut; for interrupted or heavy roughing, a tougher grade or different geometry would be recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMG 120408 T505 Wendeplatten - Tungaloy
SNMG120408 T505 ISO-Drehwendeschneidplatte zum Drehen | Tungaloy Die SNMG120408 T505 verbindet CVD-beschichtetes Hartmetall mit verlängerter Standzeit für wirtschaftliche Gusseisenbearbeitung beim Außen- und Innendrehen CVD-beschichtetes Hartmetall für hohe Standzeit Optimiert für wirtschaftliche Gusseisenbearbeitung Quadratische Platte mit zylindrischem Loch Eckenradius 0,8 mm für präzise Konturen Doppelseitiger Spanbrecher für wirtschaftliche Schnitte Robuste Beschichtung und Materialvorteile für längere Werkzeugläufe Die Kombination aus CVD-beschichtetem Hartmetall und einer speziell abgestimmten Sorte sorgt für beständige Schnittkanten und reduzierte Verschleißrate. Durch die Beschichtung wird die Wärmeaufnahme an der Schneidkante verringert, was zu einer gleichmäßigeren Standzeit führt und Rüstintervalle verlängert. Anwender profitieren von konstanter Werkstückqualität und geringerer Ausschussrate bei der Bearbeitung von Gusseisen. Präzise Geometrie für zuverlässige Prozessstabilität Die quadratische Plattenform mit zylindrischem Loch und der Eckenradius von 0,8 mm ermöglichen reproduzierbare Spannbedingungen und einfache Indexierung. Die ISO-genormte Ausführung gewährleistet Kompatibilität zu gängigen Außenhaltern und Bohrstangen, wobei Form, Freiwinkel und Dicke die Passgenauigkeit bestimmen. So werden Vibrationen minimiert und Oberflächengüte sowie Maßhaltigkeit verbessert. Wirtschaftliche Anwendung und Prozessnutzen beim Drehen Die Sorte T505 wurde speziell für die wirtschaftliche Bearbeitung von Gusseisen entwickelt und bietet ausbalancierte Leistungen bei unterschiedlichen Schnittbedingungen. Der doppelseitige Spanbrecher erlaubt längere Standzeiten pro Platte und senkt die Werkzeugkosten pro Werkstück. Für Betriebe bedeutet das geringere Stillstandszeiten, planbare Werkzeugeinsätze und eine bessere Kostenstruktur in der Serienfertigung. Zielgruppe und Einsatzszenarien Konzipiert für Anwender in der Serienfertigung und im Kleinserienbereich, liefert diese Platte Vorteile für Werkzeugmacher, Produktionsleiter und Zerspanungsfachleute, die Prozessstabilität und Wirtschaftlichkeit erwarten. Insbesondere beim Drehen von Gusskomponenten, die wechselnde Schnittbedingungen und gelegentliche Schnittunterbrechungen aufweisen, erweist sich die Platte als belastbare Lösung. Nutzen Sie die wirtschaftliche Performance der T505-Sorte von Tungaloy und fordern Sie Ihr individuelles Angebot bei Metav Werkzeuge an oder kontaktieren Sie unsere Anwendungstechnik per eMail: info@metav-werkzeuge.com ! Produktmerkmale Artikelnummer: 6831341 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: SNMG120408 T505 Hersteller SKU: TUN6831341 Fakten Plattendicke: 4,76 mm Plattengröße: 12 mm Eckenradius: 0,8 mm Winkel: 90° Freiwinkel: 0° Besonderheiten CVD-beschichtetes Hartmetall (chemische Gasphasenabscheidung) doppelseitiger Spanbrecher zylindrisches Loch quadratische Platte ISO-genormt (Kompatibilität zu standardisierten Haltern) Anwendung: Drehen Geeignet für Gusseisenbearbeitung FAQ Was unterscheidet diese Platte von anderen SNMG-Typen? Die SNMG120408 T505 von Tungaloy zeichnet sich durch ihre CVD-Beschichtung und die Sorte T505 aus, die speziell auf wirtschaftliche Gusseisenbearbeitung ausgelegt ist. Im Vergleich zu unbeschichteten Varianten bietet diese Platte verlängerte Standzeit und stabilere Schneidkanten. Für welche Werkstoffklassen ist die SNMG120408 T505 geeignet? Primär ist die SNMG120408 T505 für Gusseisen entwickelt. Die Geometrie und der Spanbrecher sind auf Spanformung und Prozessstabilität bei typischen Gusswerkstoffen optimiert. Wie beeinflusst der Eckenradius die Bearbeitungsergebnisse? Der Eckenradius 0,8 mm der SNMG120408 T505 ermöglicht präzisere Konturen und sorgt für ein ausgewogenes Verhältnis zwischen Schnittstabilität und Oberflächengüte. Kleinere Radien reduzieren den Kraftbedarf bei feinen Konturen. Welche Vorteile bietet das zylindrische Loch bei der Platte? Das zylindrische Loch vereinfacht die Zentrierung auf dem Halter und garantiert reproduzierbare Spannverhältnisse, was zu konstanteren Ergebnissen und weniger Ausschuss bei Serienläufen führt. Ist die SNMG120408 T505 für unterbrochene Schnitte geeignet? Ja, die Sorte T505 und die robuste Beschichtung sind für wechselnde Schnittbedingungen ausgelegt. Für stark unterbrochene Schnitte sollte die Halterstabilität geprüft werden, um optimale Standzeiten zu erreichen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com