TNMG 160412 AH8015 Wendeplatten - Tungaloy
Benefit from a balanced combination of wear resistance and edge stability thanks to the AH8015 PVD coating and robust carbide substrate, together with a 1.2 mm corner radius and 0° clearance for versatile turning tasks; order or request application advice via Metav Werkzeuge. TNMG 160412 AH8015 Tungaloy turning insert — PVD-coated carbide, 60° geometry A TNMG160412 AH8015 indexable insert engineered for external and internal turning, optimised for heat‑resistant alloys and general turning operations PVD-coated carbide AH8015 for heat-resistant alloys 60° cutting geometry for stable chip control 1.2 mm corner radius for robust edge strength Triangular, double-sided insert with cylindrical hole Consistent machining performance for heat‑resistant alloys The PVD-coated AH8015 grade delivers a measured balance between wear resistance and edge stability, making this insert well suited to machining heat‑resistant alloys where thermal and abrasive loads vary. As an ISO-compatible indexable component, the insert supports predictable tool life and repeatability in batch production, reducing the frequency of insert changes and stabilising process costs. Geometry that supports versatile turning strategies The 60° cutting geometry combined with a 0° clearance angle provides a flexible solution for a broad range of turning tasks. The triangular form offers multiple cutting edges per insert position, while the central cylindrical hole ensures secure clamping in standard carriers. The result is a geometry that supports consistent cutting forces and straightforward indexability in both light‑duty finishing and heavier roughing passes. Improved edge strength and chip behaviour The 1.2 mm corner radius increases edge robustness and helps dampen vibration at the cutting point, extending service intervals where interrupted cuts occur. The integrated double-sided chipbreaker promotes controlled chip formation, improving evacuation and reducing the risk of re-cutting. Combined with the PVD layer, these features maintain a stable cutting edge and contribute to consistent surface quality. Easy integration into established tool systems Compatibility with toolholders is determined by form, clearance, tolerance class, clamping method, size and thickness; this insert follows the established ISO conventions for triangular indexable inserts. The complete system typically comprises a matching holder, shim/clamping set and securing screws, enabling quick replacement and minimising set‑up time on the machine. Such system‑level clarity supports lean tooling management in production environments. Practical benefits for production throughput and reliability The TNMG160412 AH8015 insert is intended to provide a pragmatic mix of performance and longevity: fewer edge failures, predictable tool changes and improved process stability. For manufacturing operations seeking dependable repeatability on heat‑resistant alloys, the indexable insert format reduces inventory complexity while maintaining the flexibility to adapt to different holder types and turning strategies. Contact Metav Werkzeuge for Tungaloy product availability, cutting data recommendations and fast supply of original TNMG 160412 AH8015 turning inserts; technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947408 Manufacturer SKU: TUN6947408 SKU: 6947408-Tungaloy Manufacturer: Tungaloy Model series: ISO indexable turning inserts Material: carbide Numbers / Core technical data Corner radius: 1.2 mm Insert thickness: 4.76 mm Inscribed circle / size: 16 mm Cutting angle: 60° Clearance angle: 0° Special features / Applications PVD-coated carbide AH8015 Double-sided chipbreaker Triangular shape, with cylindrical hole Designed for turning (external and internal) Suited to heat‑resistant alloys System components: holder, shim/clamping set, spare screws FAQ Which materials is this insert intended for? The TNMG160412 AH8015 insert is specified for general turning and is especially recommended for heat‑resistant alloys, offering a balance of wear resistance and edge stability in demanding materials. How does the AH8015 grade influence tool life? The AH8015 PVD-coated carbide provides improved wear resistance and edge strength compared with uncoated grades, helping the TNMG160412 AH8015 to deliver consistent cutting performance and extended intervals between indexings. What holder features are required for correct use? Correct compatibility is determined by form, clearance, tolerance class, clamping and size; the insert requires a matched triangular holder with a compatible central clamp and the appropriate shim/clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide for heat-resistant alloys, a 60° triangular geometry and secure clamping design to keep machining reliable and productive. Order the TNMG160412 AH8015 indexable turning insert directly via Metav Werkzeuge or ask our consultants for application advice. TNMG160412 AH8015 indexable turning insert for turning – Tungaloy The TNMG160412 AH8015 is an ISO-standard indexable turning insert designed for versatile external and internal turning of heat-resistant alloys, offering a balance of wear resistance and edge stability. PVD-coated carbide grade AH8015 for heat-resistant alloys 60° triangular geometry for versatile turning 1.2 mm corner radius for consistent edge strength Double-sided with cylindrical hole for secure clamping Precision and predictable performance for demanding turning tasks The ISO-standard triangular insert provides a consistent cutting geometry that simplifies tool selection and reduces setup time. Manufactured from carbide with a PVD coating, this grade is optimised for the machining of heat-resistant alloys, combining wear resistance with edge stability to sustain cutting forces over longer tool life. Compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness; selecting the correct holder ensures reliable seating and repeatable results. Clear advantages in chip control and clamping security A double-sided chipbreaker design and a cylindrical hole enable predictable chip formation and firm, concentric clamping in appropriate toolholders. The 1.2 mm corner radius supports robust edge strength during interrupted cuts and contributes to a steady surface finish. For process planners, these characteristics translate into fewer tool changes, reduced cycle-time variability and improved component consistency when turning challenging alloys. easy specification and integration into existing tool systems Use of an ISO designation streamlines procurement and inventory: the insert matches ISO-based holders when the size and fastening match. The measured values—16 mm inscribed circle, 4.76 mm thickness, and a 60° insert angle—facilitate rapid verification against holder drawings. The balanced combination of coating and substrate makes the insert suitable as a first choice for general machining of heat‑resistant alloys, offering a pragmatic mix of durability and cutting-edge stability. Practical guidance for selection and use For external and internal turning, choose the chipbreaker and grade suited to the workpiece material, machining method and machine-tool rigidity. The AH8015 grade is tuned for heat-resistant alloys and gives a reliable compromise between flank wear resistance and toughness on the cutting edge. When retrofitting or replacing inserts, verify holder compatibility by checking form, relief angle and tolerance class; correct seating eliminates chatter and maximises the insert’s service life. For reliable turning of heat‑resistant alloys, specify the Tungaloy AH8015 insert and contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6947421-Tungaloy Manufacturer SKU: TUN6947421 Manufacturer article number: 6947421 Model series: ISO-Drehwendeschneidplatten Core data Inscribed circle / size: 16 mm Thickness: 4.76 mm Insert angle: 60° Corner radius: 1.2 mm Special features Coating / grade: AH8015 (PVD-coated carbide) Material: Carbide Chipbreaker: Double-sided Hole: With cylindrical hole Typical application: Turning (external and internal, heat-resistant alloys) FAQ What materials is this insert suitable for? The TNMG160412 AH8015 insert is intended primarily for heat-resistant alloys; the AH8015 grade balances wear resistance and edge stability for such materials. Is the insert compatible with ISO holders? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the ISO designation of the TNMG160412 AH8015 ensures straightforward matching when those parameters align. Can the TNMG160412 AH8015 be used for internal turning? Yes, the insert is suitable for both external and internal turning operations when the correct holder and setup are used. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius provides enhanced edge strength for interrupted cuts and contributes to a consistent surface finish under moderate cutting conditions. What does the PVD coating deliver in daily use? The PVD coating on the AH8015 grade improves wear resistance and helps maintain edge integrity during machining of heat‑resistant alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 AH8015 Wendeplatten - Tungaloy
Take advantage of a balanced combination of PVD-coated carbide grade AH8015 and the ISO TNMG160412 form for consistently productive turning of heat‑resistant alloys; the 1.2 mm corner radius and 60° geometry provide robust edge strength and predictable chip formation. Order the insert directly via Metav Werkzeuge or consult the team for matching holders and clamping components. TNMG160412 AH8015 turning indexable insert (Tungaloy) — PVD-coated carbide, 1.2 mm corner radius TNMG160412 AH8015 is an ISO‑standard turning indexable insert designed for external and internal turning of heat‑resistant and difficult‑to‑machine alloys, combining stable edge behaviour with economical tool life ISO TNMG160412 form for broad holder compatibility PVD-coated carbide AH8015 for heat-resistant alloys 1.2 mm corner radius for robust cutting edges Double-sided chipbreaker with cylindrical hole for secure clamping High‑performance grade and geometry for consistent metal removal The insert is produced in PVD‑coated carbide (AH8015), a grade developed for the general machining of heat‑resistant alloys where a compromise between wear resistance and edge stability is essential. The 1.2 mm corner radius increases edge strength and dampens chatter during interrupted cuts, while the 60° included angle provides a versatile geometry for a wide range of turning tasks. These design choices reduce the frequency of edge changes and help maintain consistent component tolerances in series production. System compatibility and efficient clamping for operational reliability Built to the ISO‑TNMG160412 standard, the insert fits a wide selection of external holders and boring bars when the form, free angle, tolerance class, fastening method, size and thickness match. The double‑sided chipbreaker enables two cutting edges per index, improving cost efficiency, and the cylindrical hole secures the insert against rotation in the pocket. Specifying the correct holder geometry and clamping set ensures repeatable positioning and minimises setup time, contributing to smoother process flows on the shop floor. Practical advantages in machining and tool selection guidance For turning operations the balanced properties of this grade enhance tool life without sacrificing surface finish quality; predictable chip control and stable cutting behaviour reduce machine downtime and rework. When selecting tooling, pair the insert with a holder that matches the stated free angle and tolerance class and choose a chipbreaker and grade tailored to the specific workpiece material and machining stability. Spare screws, backing pads and clamping kits compatible with ISO TNMG inserts secure long‑term productivity and simplify inventory management. Contact Metav Werkzeuge for product availability and tailored recommendations on the Tungaloy TNMG160412 AH8015 indexable insert and matching holders Technical Data Article number: 6947378 SKU: 6947378-Tungaloy Manufacturer SKU: TUN6947378 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Shape: triangular Size: 16 Plate thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 60° Free angle: 0° Hole: with cylindrical hole Special features Grade: AH8015 Cutting material: PVD-coated carbide Application: turning (external and internal) Chipbreaker: double-sided System: ISO TNMG160412 compatible FAQ What materials is this insert suitable for? The TNMG160412 AH8015 Tungaloy indexable insert is optimised for heat‑resistant alloys and similar difficult‑to‑machine materials thanks to its PVD‑coated carbide composition and balanced wear/edge stability. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge robustness and vibration damping, resulting in longer edge life and more consistent surface finishes when using the TNMG160412 AH8015 grade. Is this insert reversible and how many usable edges does it have? The insert is double‑sided with a chipbreaker on each face, offering two usable cutting edges per side depending on indexing practice and holder compatibility. Which holder characteristics must be matched for reliable use? Compatibility depends on holder form, free angle, tolerance class, fastening method, size and thickness; selecting a holder specified for ISO TNMG160412 ensures secure clamping and correct seating. Does the insert require a specific clamping screw or backing pad? Use the correct clamping set and spare screws recommended for ISO TNMG inserts; Metav Werkzeuge can advise on the suitable components to ensure proper fixation and repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160412 AH8015 Wendeplatten - Tungaloy
Benefit from a combination of PVD-coated carbide for extended wear resistance, a double-sided chipbreaker for flexible cutting strategies, and ISO TNMG geometry for reliable compatibility — order the insert directly via Metav Werkzeuge or consult our specialists for process advice. TNMG160412 AH8015 turning insert by Tungaloy — PVD-coated carbide, 60° triangular The TNMG160412 AH8015 is an ISO triangular turning insert designed for general external and internal turning of heat-resistant alloys, offering robust edge stability and predictable chip formation. ISO TNMG 160412 geometry, 60° triangular PVD-coated carbide for wear resistance Double-sided chipbreaker for flexible cutting Cylindrical hole for secure clamping Consistent machining performance for general turning The insert delivers steady cutting behaviour in a wide range of turning operations. The combination of a PVD-coated carbide substrate and the AH8015 grade provides a balanced mix of edge robustness and wear resistance, reducing tool changes and improving process reliability. For operations in moderate-to-high temperatures, this composition helps maintain cut quality and extends productive runtime. Improved chip control and secure clamping for safer cycles Equipped with a double-sided chipbreaker, the component permits adaptable chip formation depending on material and cutting parameters. The central cylindrical hole ensures stable seating and repeatable clamping in compatible holders, which minimises vibration and supports consistent surface finish. These features together lower the risk of unplanned downtime and simplify tool management in batch production. Material and coating advantages explained The AH8015 grade denotes a PVD-coated carbide formulation optimised for heat-resistant alloys and general-purpose applications. PVD coating forms a thin, wear-resistant layer that reduces adhesion and edge wear, while the carbide core supplies the necessary toughness. In practical terms, this means more consistent part tolerances and fewer interrupted cycles when machining demanding alloys. System compatibility and application guidance As an ISO-series insert, compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness. The 60° triangular shape with a 1.2 mm corner radius is suitable for a mix of profile and finishing cuts; the 4.76 mm thickness contributes to stiffness under load. Select the chipbreaker and grade to match the workpiece, machining type and machine stability for optimal results. For technical advice on machining strategies or to order Tungaloy TNMG160412 AH8015 inserts for your production line, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with selection and availability. Technical Data Article number: 6741696 SKU: 6741696-Tungaloy Manufacturer SKU: TUN6741696 Model series: ISO-Drehwendeschneidplatten Core data Insert designation: TNMG160412 Grade: AH8015 Corner radius: 1.2 mm Insert size: 16 Thickness: 4.76 mm Shape: triangular, 60° Clearance angle: 0° Hole: cylindrical Materials & features Material: carbide Coating: PVD (AH8015) Chipbreaker: double-sided Application: turning (external and internal) Compatibility: ISO turning insert system, fits holders matching form and dimensions FAQ What materials is this insert suited for? The TNMG160412 AH8015 insert is formulated for the general machining of heat-resistant alloys and offers balanced wear resistance and edge stability for such materials. Can the insert be used for both external and internal turning? Yes, the ISO TNMG geometry and the double-sided chipbreaker allow the insert to be applied to both external and internal turning when the holder provides the correct clearance and support. How does the PVD coating benefit machining performance? The PVD coating on the AH8015 grade reduces adhesive wear and improves edge life, resulting in more consistent surface finish and fewer tool changes for the TNMG160412 insert. What should be considered when selecting a holder? Holder compatibility depends on form, free angle, tolerance class, fastening and size; ensure the holder matches the TNMG160412 geometry and the insert thickness for secure clamping. Is the 1.2 mm corner radius suitable for finishing? A 1.2 mm corner radius provides a balance between strength and finish; for fine finishing a smaller radius may be chosen, while 1.2 mm offers increased edge robustness for mixed operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 AH905 Wendeplatten - Tungaloy
TNMG TNMG160412 AH905 Wendeplatte für Drehen von Tungaloy TNMG TNMG160412 AH905 liefert verschleiß- und ausbruchfeste Schneidkanten für prozesssichere Drehbearbeitung TNMG-Form ISO-konform für Außen- und Innendrehen PVD-beschichtetes Hartmetall AH905 für Standzeit Doppelseitiger Spanbrecher für stabile Spanbildung Eckenradius 1,2 mm für präzise Schneidkante Zylindrisches Loch, Plattendicke 4,76 mm zur Befestigung Hohe Standzeit durch PVD-beschichtetes Hartmetall Die AH905-Sorte basiert auf Hartmetall mit PVD-Beschichtung und bietet dadurch eine hohe Beständigkeit gegen Verschleiß und ausbruch. Das Ergebnis ist eine stabilere Schnittkante und weniger Nacharbeit bei Serienläufen. Für Anwender bedeutet das längere Standzeiten, geringere Werkzeugwechsel und eine verbesserte Wiederholgenauigkeit in der Produktion. Präzise Spanformung und zuverlässige Prozessführung Der doppelseitige Spanbrecher unterstützt eine konstante Spanbildung, was insbesondere bei variierenden Schnittbedingungen die Prozesssicherheit erhöht. Die Kompatibilität zum Halter richtet sich nach Form, Freiwinkel 0°, Toleranzklasse, Befestigung, Größe und Plattendicke 4,76 mm. So lassen sich Halterauswahl und Schnittparameter gezielt auf das Werkstück abstimmen. Wirtschaftliche Geometrie für produktive Fertigung Die TNMG-Plattenform mit 60° Winkel und einem Eckenradius von 1,2 mm kombiniert stabile Zerspanung mit wirtschaftlicher Nutzungsdauer. Die dreieckige, doppelseitige Bauform ermöglicht mehrere nutzbare Schneidkanten und reduziert die Kosten pro Schneideinsatz. Das macht die Platte attraktiv für Fertigungsprozesse mit hohen Stückzahlen. Zielgruppenorientierte Empfehlung und Einsatzempfehlung Entwickelt für CNC-Drehzentren, Lohnfertiger und industrielle Produktionslinien, die Wert auf Prozesssicherheit legen. Wendeplatte und Spanbrecher sollten immer passend zum Werkstoff und zur Bearbeitungsart gewählt werden; die AH905-Sorte empfiehlt sich, wenn scharfe Schneidkanten und stabile Bearbeitungsbedingungen gefragt sind. Bei Unsicherheit hilft technische Beratung bei der Auswahl der passenden Geometrie. Empfehlen Sie die AH905-beschichtete Wendeplatte von Tungaloy für prozesssichere Drehaufgaben und kontaktieren Sie Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 für individuelle Beratung und schnelle Lieferung Produktmerkmale Artikelnummer: 6859303 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: TNMG160412 AH905 Tungaloy-Wendeplatte Hersteller SKU: TUN6859303 Fakten Plattengröße: 16 mm Plattendicke: 4,76 mm Eckenradius: 1,2 mm Winkel: 60° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: PVD (physikalische Gasphasenabscheidung) Sorte: AH905 – verschleiß- und ausbruchfest Plattenform: Dreieckig Spanbrecher: Doppelseitig Loch: Mit Loch (zylindrisches Loch) FAQ Für welche Anwendungen eignet sich die TNMG160412 AH905? Die TNMG160412 AH905 von Tungaloy ist für das Außen- und Innendrehen ausgelegt und bietet sich besonders in Prozessen an, die stabile Schneidkanten und hohe Prozesssicherheit verlangen. Die Platte eignet sich für Serienfertigung und Varianten mit wechselnden Schnittbedingungen. Welche Vorteile bringt die AH905-Beschichtung? Die AH905-Sorte kombiniert Hartmetall mit einer PVD-Beschichtung, was zu verbesserter Verschleißfestigkeit und erhöhter Ausbruchresistenz führt. Dadurch sinkt der Werkzeugwechselaufwand und die Produktionsstabilität steigt. Wie wähle ich den passenden Halter für die Wendeplatte aus? Die Kompatibilität bestimmt sich über Form, Freiwinkel, Toleranzklasse, Befestigungsart, Plattengröße und -dicke. Prüfen Sie diese Parameter am Halter und stimmen Sie die Geometrie auf das Werkstück ab. Wie viele Schneidkanten bietet die dreieckige, doppelseitige Platte? Die dreieckige, doppelseitige Konstruktion ermöglicht mehrere nutzbare Schneidkanten. Die genaue Anzahl hängt von der Plattenauslegung und der Wendetechnik ab. Wie wird die Platte befestigt und was ist zu beachten? Die Platte hat ein zylindrisches Loch und wird mit Unterlage, Klemmsatz und passender Schraube fixiert. Achten Sie auf richtige Toleranzklasse, Anzugsmoment und korrekte Unterlegscheibe für eine sichere Spannverbindung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG 160412 GH330 Wendeplatten - Tungaloy
Take advantage of the combination of GH330 wear resistance, a 1.2 mm corner radius and ISO compatibility for dependable turning performance; order the TNMG160412 GH330 insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TNMG160412 GH330 turning insert — Tungaloy, carbide, 60° A TNMG160412 GH330 indexable turning insert engineered for ISO-standard external and internal turning, offering balanced wear resistance and edge stability in production environments. TNMG160412 ISO triangular insert GH330 wear-resistant Tungaloy grade 1.2 mm corner radius for robust entry Double-sided chipbreaker, cylindrical hole Precision and process reliability for turning operations The TNMG160412 insert is an ISO-format, triangular carbide cutting solution designed for repeatable external and internal turning. Its GH330 grade combines wear resistance and useful toughness, so the insert sustains stable cutting edges under typical production loads. Compatibility with standard ISO holders is governed by form, relief angle, tolerance class, clamping method, size and thickness; this ensures secure seating and consistent cutting geometry, which in turn supports predictable dimensional results and lower scrap rates. Geometry tailored to shape cutting behaviour and tool life Key geometric values such as the 16 mm size, 4.76 mm thickness and 1.2 mm corner radius influence cutting entry, strength and surface finish. The 60° included angle and 0° relief angle provide a neutral profile suitable for a wide range of turning tasks, while the triangular form allows two usable edges per side. The integrated double-sided chipbreaker and cylindrical locating hole support effective chip control and straightforward clamping, reducing vibration and promoting longer edge life when matched with an appropriate holder and cutting parameters. System approach and economical indexing Used as part of an ISO insert system—comprising the indexable insert, a suitable external holder or boring bar, a shim/clamping set and spare screws—the insert enables rapid index changes and minimal setup times. Indexability and double-sided design make the solution cost-effective in batch production: service intervals are extended and machine downtime is reduced. Selection of the correct chipbreaker and grade should be guided by the workpiece material, machining stability and required surface quality to achieve the best balance between productivity and tool life. Application guidance and quality assurance For robust roughing where edge strength is paramount, the 1.2 mm corner radius helps absorb intermittent loads; for fine finishing, consider smaller radii or adjusted cutting parameters to meet surface tolerance demands. The GH330 grade from Tungaloy is optimised to provide a dependable mix of hardness and resistance to wear, supporting consistent results across many turning scenarios. If there is any uncertainty about holder compatibility or best-practice cutting data, practical guidance can be provided to align the insert choice with the machining context. Contact Metav Werkzeuge for tailored application advice or to secure supply of the TNMG160412 GH330 Tungaloy indexable turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808539 Manufacturer SKU: TUN6808539 SKU: 6808539-Tungaloy Name: TNMG160412 GH330 Tungaloy turning insert Dimensions & geometry Size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 60° Relief angle: 0° Hole: cylindrical Materials & features Material: carbide Grade: GH330 (Tungaloy) Chipbreaker: double-sided Shape: triangular, TNMG form Series: ISO indexable turning inserts Compatibility: for ISO holders and boring bars FAQ What materials is this insert intended to machine? The TNMG160412 GH330 insert is intended for general turning applications; the GH330 grade is formulated to balance wear resistance and toughness, and the chipbreaker choice should be matched to the specific workpiece material. How many cutting edges are available per insert? With the triangular TNMG form and double-sided layout, multiple usable cutting edges are available; indexing the insert on the holder restores cutting geometry quickly and economically. Which holders are compatible with this insert? Compatibility depends on insert form, clearance angle, tolerance class, clamping style, size and thickness; the TNMG160412 fits ISO-standard holders and appropriate boring bars when these parameters match. Does the insert require a special clamping set? Standard clamping shims and screws designed for ISO inserts are suitable; the system typically comprises the insert, holder or bar, shim/clamping set and replacement screws. What are the benefits of the GH330 grade from Tungaloy? The GH330 grade offers a practical balance of wear resistance and edge stability, supporting longer tool life and consistent machining results under varied turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 GT9530 Wendeplatten - Tungaloy
Take advantage of the GT9530 cermet grade and ISO TNMG geometry for reliable finishing and extended tool life; compatibility with standard ISO holders ensures straightforward integration into existing turning setups. Order the TNMG160412 GT9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160412 GT9530 Tungaloy turning insert — coated cermet, ISO TNMG geometry The TNMG160412 GT9530 is an ISO-standard triangular turning insert designed for finishing to light universal turning of steel, offering a coated cermet grade for improved surface quality and extended tool life. Coated cermet GT9530 for high wear resistance ISO TNMG 60° triangular insert with hole 1.2 mm corner radius for superior surface finish Double-sided chipbreaker for consistent chip control Exceptional surface quality from a coated cermet grade The coated cermet grade GT9530 combines wear-resistant chemistry with a surface layer engineered for finishing operations. In practice this means improved surface finish and longer intervals between tool changes when machining steel under stable clamping and cutting conditions. Cermet materials differ from conventional cemented carbide by emphasising edge stability and heat resistance at the cutting zone, which reduces built-up edge and enables finer finishes on turned components. ISO geometry and mounting that simplify tool management Built to the ISO TNMG form, the insert features a 60° triangular shape with a cylindrical hole and 4.76 mm thickness, ensuring compatibility with a wide range of indexable turning holders. Compatibility depends on matching the insert form, relief angle, tolerance class, fastening method, size and thickness; keeping this correspondence simplifies inventory and reduces setup time. The 1.2 mm corner radius supports fine edge strength for finishing passes while the double-sided chipbreaker provides consistent chip formation and repeatable performance across indexings. Productivity advantages for stable turning processes When used in stable fixture and machine conditions, the GT9530 grade promotes consistent tool life and reproducible surface quality, which translates to lower process variability and fewer interruptions for insert changes. The insert’s geometry and chip control characteristics contribute to efficient swarf evacuation and steady cutting forces, supporting higher productivity in batch production or precision single-part runs. For tailored application advice, Metav Werkzeuge can provide guidance on selecting the matching holder, insert clamping and cutting parameters to maximise process security. For reliable finishing performance and extended tool life with the Tungaloy TNMG160412 GT9530 insert, contact Metav Werkzeuge to place an order or request application advice from our consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6724074 Manufacturer SKU: TUN6724074 SKU: 6724074-Tungaloy Model series: ISO turning inserts Insert designation: TNMG160412 Grade: GT9530 Material/type: coated cermet Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Main angle: 60° Hole: with cylindrical hole Special features Triangular insert form Double-sided chipbreaker Compatible with ISO TNMG holders Application: turning Material (base): carbide FAQ What materials is this insert suitable for? The TNMG160412 GT9530 insert from Tungaloy is optimised for turning steel, offering a finishing-to-light-universal performance profile with improved surface quality. Is the insert indexable and reversible? Yes, the TNMG160412 is double-sided with a chipbreaker, enabling re-indexing to a fresh cutting edge and extending usable life of each insert. How is compatibility with toolholders determined? Compatibility is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; the ISO TNMG geometry of this insert fits holders specified for TNMG inserts. What surface finish can be expected with a 1.2 mm corner radius? A 1.2 mm corner radius offers a balance between edge strength and fine surface finish, suitable for finishing passes or light general turning where a smooth surface is required. How does the GT9530 grade differ from standard carbide grades? The GT9530 coated cermet grade emphasises wear resistance and edge stability for finishing operations; compared with some regular carbide grades it provides better surface quality and longer life in stable turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 KS20 Wendeplatten - Tungaloy
Benefit from the combination of KS20 carbide grade, a 60° triangular geometry and reliable indexation that supports a smooth turning process; order original inserts directly via Metav Werkzeuge or consult our specialists for application advice. TNMG 160412 KS20 indexable turning insert — ISO turning insert for Drehen, Tungaloy A TNMG160412 KS20 indexable insert designed for external and internal turning in ISO holders, providing a balance of wear resistance and edge stability for a wide range of turning tasks ISO TNMG form compatible with standard holders KS20 Tungaloy carbide grade with balanced properties 60° triangular form with 1.2 mm nose radius Double-sided chipbreaker and cylindrical-hole fixing Engineered for consistent process performance The insert is manufactured from cemented carbide in the KS20 Tungaloy grade, which combines wear resistance and toughness to maintain cutting-edge stability during both steady and interrupted cuts. That balanced material behaviour reduces downtime for insert changes and supports higher process reliability in series production. The ISO design ensures ISO compatibility with standard TNMG toolholders; compatibility is determined by form, relief angle, tolerance class, fixing and size, allowing a straightforward integration into existing tool systems without altering set-up strategies. Geometry that enhances surface finish and tool life A 60° triangular form with a 1.2 mm nose radius and a plate thickness of 4.76 mm provides versatility between light finishing and medium turning operations. The chosen nose radius helps to improve surface quality while distributing cutting forces to protect the edge under variable cutting conditions. The double-sided chipbreaker and the cylindrical-hole fixing support quick indexation and secure clamping, making the insert economical through doubled life per index and reduced handling time in the production cycle. Application focus and handling recommendations Intended specifically for turning, the insert complements its geometry with the KS20 grade to offer a well‑rounded solution where both edge stability and wear resistance are necessary. Selection of the chipbreaker and the grade should match the workpiece material, machining strategy and machine stability to gain the greatest benefit from the insert’s properties. The triangular profile enables three usable edges per index, improving cost-efficiency, while the ISO form and mounting style fit established clamping systems and replacement procedures in modern turning centres. For tailored machining advice or to secure original Tungaloy inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, application-specific guidance and supply. Technical data Article number: 6808537 Manufacturer SKU: TUN6808537 SKU: 6808537-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TNMG160412 KS20 Tungaloy-Wendeplatte Facts Size: 16 mm Thickness: 4.76 mm Nose radius: 1.2 mm Included angle: 60° Relief angle: 0° Manufacturer article number: 6808537 Special features Cemented carbide material KS20 Tungaloy grade Double-sided chipbreaker Cylindrical-hole fixing Triangular plate form ISO TNMG profile For external and internal turning FAQ What holder compatibility is required for correct fitment? Compatibility depends on the holder’s TNMG form, relief angle, tolerance class, fixing and size; the TNMG160412 KS20 insert is made for ISO TNMG toolholders. How many usable cutting edges are available per insert? The triangular insert provides three usable edges per index, and the double-sided chipbreaker doubles the available edges for cost-effective indexation. Which properties does the KS20 grade provide? The KS20 Tungaloy grade offers a balance of wear resistance and toughness, giving stable cutting-edge behaviour for general turning applications. Is the insert suitable for interrupted cuts? Yes; the combination of the KS20 grade and robust geometry supports intermittent cutting where edge stability is required. What fixes the insert to the holder? The insert uses a cylindrical-hole fixing and standard clamping components, matching ISO TNMG mounting practice. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp NS9530 cermet grade, precise ISO compatibility and low cutting forces for consistent finishing results; order the insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160412 NS9530 TNMG turning insert for finishing — Tungaloy A TNMG 160412 NS9530 indexable turning insert engineered for finishing steel, offering a sharp cutting edge and optimised chip control in continuous cutting operations NS9530 uncoated cermet for high surface finish 60° triangular insert with 1.2 mm corner radius Double-sided with cylindrical hole for secure clamping Designed for finishing steel with low cutting forces Precision finishing with a low-force cutting edge The NS9530 grade is an uncoated cermet optimised for finish turning of steel, delivering a consistently high surface finish and reduced cutting forces compared with conventional grades. As a finishing grade, it is intended for continuous cuts and small depths of cut, where the combination of a sharp cutting edge and the material properties of cermet produce fine surface quality and low built-up edge. For production environments that require repeatable part quality, this geometry helps to maintain tight tolerances with predictable performance. ISO compatibility and secure clamping for reliable integration The insert follows the ISO TNMG160412 designation, which defines the triangular 60° geometry and size class; compatibility with a holder is determined by form, relief angle, tolerance class, fastening, size and thickness. The insert’s 0° relief angle, 4.76 mm plate thickness and cylindrical hole require a matching clamping system—either an indexed pocket or a screw-down set-up with the appropriate shim and screw. Choosing the correct external holder or boring bar ensures stable seating, repeatable positioning and safe torque transmission during turning operations. Predictable chip control and economical indexing Equipped with a double-sided chipbreaker, the insert provides improved chip control during finishing passes and extends usable life through indexing. The 1.2 mm corner radius supports edge strength without compromising the fine surface quality expected from a finishing insert. Because the grade is uncoated, it offers a consistent cutting geometry and can be preferable where coating-related adhesion or thermal effects are a concern. Fewer unexpected variances in edge geometry mean less downtime and more predictable tool-change intervals. Simple selection and system overview for workshop use The machining system for this insert typically comprises the ISO indexable turning insert, a compatible external holder or boring bar, a supporting shim/clamping kit and replacement screws. For practical selection: match the insert’s TNMG shape, size 16, thickness 4.76 mm and hole style to the holder’s pocket; select the NS9530 grade specifically for finish-turning of steel with small feeds and depths. If uncertainty remains about holder compatibility or the right cutting parameters, refer to the holder manufacturer’s pocket specifications or consult a tooling specialist to avoid mismatched geometry. For tailored advice on Tungaloy finishing inserts and to confirm suitability for specific steel grades or holder systems, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical details and availability. Technical Data Article number: 6784723 Manufacturer SKU: TUN6784723 Label: TNMG160412 NS9530 Tungaloy insert Core dimensions Corner radius: 1.2 mm Relief angle: 0° Included angle: 60° Size (inscribed circle): 16 mm Plate thickness: 4.76 mm Special features Grade: NS9530 (uncoated cermet) Chipbreaker: double-sided Hole style: cylindrical hole Geometry: triangular insert Application: turning; finishing steel Material: carbide FAQ Is this insert suitable for roughing operations? The NS9530 grade and the TNMG160412 geometry are designed as a finishing grade for steel; it is not optimised for heavy roughing where larger depths of cut and interrupted cuts are required. How does the TNMG 160412 secure to the holder? The insert features a cylindrical hole and requires a matching clamping system—shim and screw or an ISO-compatible pocket—so that the seating, tolerance class and fastening method correspond to the holder design. What benefits does the uncoated cermet grade provide? The NS9530 uncoated cermet offers a sharp cutting edge and stable performance in continuous finish cutting, giving consistent surface finish and lower cutting forces compared with some coated grades. Can the insert be indexed to use the second side? Yes; the double-sided design allows indexing to the opposite cutting edge, effectively doubling the number of available edges and improving overall tool economy. Which holder characteristics must be checked for compatibility? Verify holder pocket form, relief angle match (0° relief), tolerance class, fastening method, size (16) and plate thickness (4.76 mm) to ensure correct fit and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a precise uncoated cermet cutting grade and ISO compatibility for consistent finishing results; the sharp cutting edge and low cutting forces support high surface quality and efficient process stability. Order the TNMG160412 NS9530 insert directly via Metav Werkzeuge or consult our specialists for tailored application advice. TNMG160412 NS9530 — TNMG indexable turning insert for turning, Tungaloy TNMG160412 NS9530 is an ISO-indexable turning insert designed for finishing operations on steel, offering a sharp cutting edge and low cutting forces for continuous cuts and small depths of cut Uncoated cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces Double-sided chipbreaker for efficient chip control ISO TNMG triangular insert, 1.2 mm corner radius Precise finishing performance for steel components The uncoated cermet NS9530 is formulated as a finishing grade for machining steel, delivering a sharp cutting edge that reduces cutting forces and improves surface integrity. This combination is particularly effective for continuous cuts and small depths of cut where a fine finish is required. The cutting material’s low adhesion tendency helps maintain stable machining over repeated indexing cycles, which translates into predictable part quality and reduced rework in batch production. ISO compatibility and simple system integration As an ISO-format indexable insert, the component fits established toolholder systems when the holder’s shape, 0° relief angle, tolerance class, fixing method, size and thickness match the insert specifications. The triangular geometry with a cylindrical hole and a 60° included angle ensures mechanical repeatability and straightforward replacement during tool changes. Clearly defined dimensions — including a 16 mm major size and 4.76 mm thickness — enable fast verification of compatibility with existing turning assemblies and quick integration into standard production setups. Controlled chips and robust edge stability for reliable runs The insert features a double-sided chipbreaker, which aids consistent chip formation and evacuation during finishing operations, reducing the risk of surface damage or tool interference. A 1.2 mm corner radius balances edge strength with the ability to produce fine surface finishes, extending in-process tool life under appropriate cutting parameters. Taken together, these attributes support uninterrupted production runs and make the insert a reliable choice for workshops aiming to combine efficiency with high-quality visual and dimensional results. Contact Metav Werkzeuge for technical recommendations on Tungaloy TNMG turning inserts or to discuss the best grade for specific steel applications — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6745775 SKU: 6745775-Tungaloy Manufacturer SKU: TUN6745775 Manufacturer article number: 6745775 Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 60° Relief angle: 0° Special features Shape: triangular, with cylindrical hole Grade: NS9530, uncoated cermet Chipbreaker: double-sided Application: turning, finishing steel System: ISO-indexable insert; compatibility via holder form, relief angle, tolerance, fixing, size and thickness FAQ What is this insert primarily used for? The TNMG160412 NS9530 insert is intended for turning with a focus on finishing steel components, delivering low cutting forces and a high surface finish for continuous cuts and small depths of cut. Which materials are suitable for this grade? This uncoated cermet grade NS9530 is optimised for steel finishing; it is specified for operations where a sharp edge and low cutting forces are required. How can compatibility with existing holders be checked? Compatibility depends on the holder’s form, relief angle, tolerance class, fixing method, size and thickness; verify these parameters against the TNMG160412 dimensions and 0° relief specification before installation. Does the insert provide good chip control and edge life? Yes — the TNMG160412 features a double-sided chipbreaker and a 1.2 mm corner radius, supporting consistent chip formation and stable cutting-edge performance during finishing runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 NS9530 Wendeplatten - Tungaloy
Benefit from sharp-edge finishing and low cutting forces for consistent surface quality; the insert’s ISO compatibility enables straightforward integration into existing turning setups. Order the original insert directly via Metav Werkzeuge or consult the specialists if application advice is required. TNMG 160412 NS9530 Tungaloy turning insert — uncoated cermet finishing grade TNMG160412 NS9530 is a triangular ISO insert designed for external and internal turning, optimised for finishing passes on steel with a sharp cutting edge and precise chip control Uncoated cermet grade NS9530 Sharp cutting edge for fine finishing Double-sided chipbreaker design ISO triangular insert with 60° included angle Superior surface finish with reduced cutting forces The NS9530 grade is an uncoated cermet developed for finishing applications on steel, delivering a consistently fine surface quality and reduced tendency to built-up edge. The composite nature of cermet provides a hard, wear-resistant cutting face while maintaining lower friction than conventional grades; this combination results in lower cutting forces and stable finishing passes. For manufacturers aiming to improve part finish without complex process changes, the geometry and grade support predictable results on continuous cuts and small depths of cut. Easy integration into ISO turning systems Designed as an ISO-standard insert, the geometry corresponds to the ISO 160412 family and a 60° included angle, ensuring compatibility with a wide range of external holders and boring bars. The insert includes a cylindrical centre hole for secure screw clamping and a robust seating with standard tolerances, simplifying tool changeover and stock management. Compatibility depends on holder form, clearance, tolerance class, fastening and insert thickness; the standardised format facilitates swift retrofit into existing tooling systems and supports efficient production workflows. Chip control and dimensional features explained The double-sided chipbreaker profile promotes controlled chip formation during finishing operations, reducing interruptions and improving process reliability. Key dimensions such as the 4.76 mm plate thickness and 16 mm inscribed circle size offer rigidity for light to moderate finishing cuts, while the 1.2 mm corner radius balances edge strength with the need for fine surface integrity. These measurable attributes allow planners to calculate approach parameters and predict tool behaviour under specified cutting conditions, helping to reduce trial-and-error at setup. When this finishing grade is the right choice Select this insert for continuous turning of steel components where a high-quality finish and repeatable results are required. The combination of a sharp cutting edge and the NS9530 composition is particularly suitable for operations with small feeds and shallow depths of cut, where aesthetic finish and dimensional fidelity are priorities. Process engineers seeking to shorten secondary finishing or polishing operations will find the grade advantageous, as it can lower rework rates and contribute to a more economical production flow. Contact Metav Werkzeuge for application guidance and to order original Tungaloy finishing inserts with NS9530 grade; technical advice is available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6729084 Manufacturer SKU: TUN6729084 Model series: ISO-Drehwendeschneidplatten Facts Insert designation: TNMG160412 Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 60° Relief/clearance angle: 0° Special features Uncoated cermet cutting grade NS9530 Triangular insert, double-sided chipbreaker Cylindrical centre hole for screw clamping Intended application: turning (external and internal) Suitable for finishing cuts on steel FAQ What materials is this insert suited for? The TNMG160412 NS9530 insert is formulated as a finishing grade for steel; the uncoated cermet composition is optimised for low cutting forces and superior surface finish on ferrous materials. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method and insert thickness; the ISO 160412 designation ensures fitment with standard triangular turning holders designed for TNMG inserts. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius provides a balance between edge strength and the ability to produce fine surface finishes; it is recommended for small to moderate finishing cuts where dimensional accuracy and surface integrity are important. Is the insert suitable for both external and internal turning? Yes. The insert’s geometry and double-sided chipbreaker make it suitable for both external and internal turning applications when matched with an appropriate external holder or boring bar. What clamping method does the insert require? The insert features a cylindrical centre hole and is intended for screw clamping with the standard mounting hardware used for ISO turning inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 cermet finishing grade, the 60° triangular geometry and the 1.2 mm corner radius for consistently high surface quality and low cutting forces; order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. TNMG 160412 NS9530 Tungaloy indexable insert for turning (60°, 1.2 mm radius) TNMG160412 NS9530 Tungaloy is an ISO indexable turning insert engineered for finishing operations on steel and similar materials ISO triangular insert TNMG 160412 for turning NS9530 cermet grade for fine finishing 1.2 mm corner radius for superior surface finish Double-sided chipbreaker, cylindrical hole design Precision finishing with a cermet grade built for low cutting forces The NS9530 grade is an uncoated cermet formulated as a finishing grade for steel, delivering a sharp cutting edge and low cutting forces that translate into improved surface quality and reduced rework. In continuous cutting and small-depth finishing passes the combination of the cermet edge geometry and the fine grade chemistry reduces built-up edge and supports stable machining conditions. As a result, cycle-time consistency and part quality improve, particularly where tolerance and surface finish are decisive. Geometry and system compatibility that ensure predictable clamping and stability This triangular insert features a nominal size of 16 mm, a plate thickness of 4.76 mm and an included angle of 60°, with a 1.2 mm corner radius and a 0° clearance angle. The insert is supplied with a cylindrical hole for secure fastening and a double-sided chipbreaker, enabling indexable use on both faces. Compatibility with the toolholder depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; the machining system typically comprises the ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws. These geometric parameters yield a repeatable seating position and predictable cutting behaviour during finishing passes. Practical applications and selection guidance for efficient turning Designed primarily for turning, the indexable insert is well suited to both external and internal finishing operations on steel where surface integrity matters. The double-sided chipbreaker supports chip control in continuous chip flows while the fine cermet grade keeps cutting forces low at small depths of cut. For best results choose a compatible holder that secures the insert without micro-movement and match the chipbreaker and grade to the feed and depth of cut. When switching from roughing to finishing, the sharp edge and cermet wear characteristics of this insert reduce the need for secondary finishing, improving throughput and part consistency. For application-specific recommendations and stock availability of the Tungaloy TNMG160412 NS9530 insert, contact Metav Werkzeuge for tailored machining support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6944861 SKU: 6944861-Tungaloy Manufacturer SKU: TUN6944861 Model series: ISO indexable turning inserts Label: TNMG160412 NS9530 Tungaloy-Wendeplatte Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 60° Clearance angle: 0° Hole style: cylindrical hole Insert shape: triangular Sidedness: double-sided Special features Grade: NS9530 Cutting material type: uncoated cermet Application: turning (external and internal) Typical use: finishing, continuous cut, small depths of cut Chip control: double-sided chipbreaker Compatibility criteria: form, clearance angle, tolerance class, fastening, size, thickness System components: ISO insert, matching external holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert intended for? The TNMG160412 NS9530 insert is formulated as a finishing grade for steel and similar ferrous materials; the NS9530 cermet provides low cutting forces and a sharp edge suited to fine turning. Can this insert be indexed and reused? Yes, the TNMG160412 NS9530 is double-sided and designed for indexing; the double-sided chipbreaker and cylindrical hole enable controlled reseating and extended usage. Which geometry features influence holder selection? Holder selection should consider the 60° included angle, 0° clearance angle, insert thickness 4.76 mm and size 16 mm to ensure correct seating and clamping for stable finishing cuts. Is the TNMG160412 NS9530 suitable for internal turning? Yes, this ISO triangular insert is suitable for both external and internal turning where finishing quality and low cutting forces are required. How does the 1.2 mm corner radius affect surface finish? The 1.2 mm corner radius balances edge strength and surface definition; it helps achieve a high surface finish while maintaining edge robustness in finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T505 Wendeplatten - Tungaloy
Take advantage of the combination of an ISO 160412 geometry, a CVD-coated cemented carbide grade and a robust 1.2 mm nose radius for consistent, economical machining of cast iron; order directly via Metav Werkzeuge or contact our consultants for application advice. TNMG160412 T505 indexable turning insert by Tungaloy — for turning cast iron TNMG160412 T505 is a triangular, ISO-standard indexable insert designed for external and internal turning in cast iron and similar materials CVD-coated cemented carbide grade T505 Optimised for cast iron machining 60° triangular insert, 1.2 mm nose radius Double-sided chipbreaker, cylindrical hole Dependable ISO compatibility for predictable tool changeovers The insert follows the ISO 160412 designation and is manufactured to match common holder interfaces; compatibility is defined by insert form, clearance angle, tolerance class, fastening method, size and thickness. This ensures straightforward replacement and interchangeability in production lines where downtimes are costly. The CVD coating on the cemented carbide substrate increases wear resistance and thermal stability, extending edge life under typical turning speeds for cast iron and improving process reliability. Stable chip control and surface finish for efficient turning Equipped with a double-sided chipbreaker and a 1.2 mm nose radius, the insert supports controlled chip formation and a consistent cutting edge geometry. The chipbreaker design reduces irregular chips and helps maintain a predictable cutting force, which is particularly advantageous when encountering interrupted cuts or variable workpiece rigidity. The combination of the 60° triangular shape and the nominal 0° clearance angle provides a balance between strength and accessibility to the cutting zone, delivering improved surface quality and reduced need for rework. System-oriented design for flexible workshop integration The insert is part of an indexable system composed of the insert, a matched external holder or shank, a support shim or clamp set and replacement screws. Selection of the appropriate chipbreaker and grade should be guided by workpiece stability, desired cutting speed and the specific cast iron grade. For typical turning operations the TNMG160412 T505 insert fits standard holders and offers a practical solution where a cost-effective, long-running tool is required. Reference: SKU 6831365-Tungaloy and manufacturer article number TUN6831365 for ordering and inventory control. Contact Metav Werkzeuge today for tailored application support and immediate availability through Metav Werkzeuge — technical consultants are available to advise on holder compatibility and optimal cutting parameters Technical data Article number: 6831365 SKU: 6831365-Tungaloy Manufacturer SKU: TUN6831365 Manufacturer: Tungaloy Model series: ISO indexable turning inserts Name: TNMG160412 T505 indexable insert Core dimensions ISO designation: 160412 Insert size: 16 Thickness: 4.76 mm Geometry angle: 60° Nose radius: 1.2 mm Clearance angle: 0° Design & special features Material: cemented carbide Coating: CVD coating Grade: T505 Shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is this insert intended for? This TNMG160412 T505 indexable insert is designed primarily for machining cast iron; the CVD coating and the T505 grade suit a broad range of grey and nodular cast irons. How does the chipbreaker affect performance? The double-sided chipbreaker on the TNMG160412 T505 improves chip control and cutting stability, which helps maintain consistent surface finish and reduces the risk of built-up edge during turning. Is this insert compatible with standard ISO holders? Yes, the insert follows the ISO 160412 specification and is compatible with holders that accept TNMG inserts, provided the holder matches the form, fastening and tolerance requirements. What advantages does the 1.2 mm nose radius provide? A 1.2 mm nose radius increases edge strength and smooths the cut, offering improved tool life and better surface finish in typical turning operations. Can this insert be used for interrupted cuts? The T505 grade combined with the robust geometry and chipbreaker makes the insert suitable for many interrupted cutting scenarios, though selection should consider workpiece rigidity and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T505 Wendeplatten - Tungaloy
Benefit from efficient, repeatable results in cast-iron turning thanks to the combination of a CVD-coated carbide grade T505 and a double-sided chipbreaker that stabilises cutting conditions and reduces downtime; order the insert directly via Metav Werkzeuge or ask the consultants for compatibility advice. TNMG 160412 T505 triangular turning insert — CVD-coated carbide for cast-iron turning by Tungaloy The TNMG160412 T505 is an ISO-standard triangular indexable insert for external and internal turning, designed for economical machining of cast iron and compatible with ISO holders when matched by form and tolerance CVD-coated carbide grade T505 for cast iron Triangular ISO form TNMG with 60° included angle Cylindrical hole and double-sided chipbreaker 4.76 mm thickness for stable clamping Faster, more economical machining of cast iron with controlled chip formation The combination of a CVD-coated carbide substrate and the T505 grade prioritises economic performance when machining cast iron. The coating increases abrasive resistance while the carbide core maintains edge stability, which together extend tool life and reduce changeover frequency. Built-in chip control on both faces helps maintain consistent cutting forces; this reduces vibration and allows higher effective feed rates without sacrificing surface finish. For operations where cycle time and predictable tool life are decisive, this insert supports a measurable productivity advantage. Reliable fit and handling that simplify setup and reduce errors Produced to ISO dimensions, the insert has a triangular shape with a 60° included angle and a 0° clearance angle, ensuring compatibility with standard TNMG holders when matched for size and thickness. The cylindrical hole and 4.76 mm plate thickness ensure secure clamping and repeatable seating, which cuts setup time and minimises misalignment risks. Clear design features make it straightforward to select a matching seat and screw; the standard form also eases stock management in mixed-holder environments. Practical cutting data and consequence for the process A corner radius of 1.2 mm gives a balance between edge strength and surface finish, permitting moderate to heavy cutting without premature chipping. The double-sided chipbreaker supports intermittent cuts and varying stability conditions, while the carbide construction copes with typical cast-iron abrasiveness. When combined with an appropriately rated holder and stable workholding, the insert contributes to a shortened total processing time and a lower cost per component, making it a good choice for batch and serial turning where repeatable results matter. Contact Metav Werkzeuge for tailored holder compatibility checks and grade recommendations: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6831352 SKU: 6831352-Tungaloy Manufacturer SKU: TUN6831352 Model series: ISO-Drehwendeschneidplatten Designation: TNMG160412 Grade: T505 Material: carbide Facts Corner radius: 1.2 mm Insert size: 16 mm Thickness: 4.76 mm Included angle: 60° Clearance angle: 0° Hole: with cylindrical hole Special features CVD-coated carbide grade Double-sided chipbreaker Triangular TNMG form Cylindrical hole Compatible with ISO holders (selection by form, tolerance and thickness) Application: Turning (external and internal) Recommended use: economical machining of cast iron FAQ What materials is this insert suitable for? The TNMG160412 T505 insert is formulated for cast iron machining and performs best when the material and cutting data match the grade’s intended use. How does the T505 grade affect tool life? Tungaloy’s T505 grade combines a wear-resistant coating with a stable carbide body to improve edge life under abrasive cast-iron conditions, which often leads to fewer insert changes. Is the insert reversible and what does double-sided chipbreaker mean? Yes — the TNMG geometry is double-sided, so both faces can be used; the chipbreaker on each face is shaped to control chips in varying cutting scenarios. Which holder details must be checked for compatibility? Compatibility depends on insert form, free/clearance angle, tolerance class, mounting method, size and thickness; verify the seat matches the TNMG160412 dimensions before use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T5105 Wendeplatten - Tungaloy
Take advantage of a wear-resistant T5105 CVD-coated carbide grade combined with ISO conformity and a secure clamping form to ensure consistent surface finish and extended tool life in high-speed turning. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for tailored machining recommendations. TNMG 160412 T5105 TNMG160412 turning insert — Tungaloy for turning A TNMG 160412 T5105 triangular ISO turning insert designed for external and internal turning, optimised for high-speed machining of cast iron under stable conditions CVD-coated carbide for high-speed turning ISO triangular 60° form for standard holders 1.2 mm corner radius for robust edge strength Double-sided chipbreaker with cylindrical hole Maximum productivity through optimised grade and coating The combination of a CVD-coated carbide substrate and the T5105 grade provides markedly improved wear resistance during sustained, high-speed operations. This formulation reduces flank wear and maintains cutting-edge geometry for longer, minimising tool changes and downtime. In practice, this means fewer interruptions in the production cycle and a more predictable maintenance schedule — a decisive benefit for precision turning processes requiring consistent dimensional accuracy and repeatable surface quality. Secure compatibility and predictable clamping for repeatable results The insert conforms to ISO geometry and a 60° triangular shape, which ensures compatibility with a wide range of standard external holders and boring bars. Important mounting parameters such as form, clearance angle, tolerance class, fastening method, size and thickness determine holder fit; the presence of a cylindrical hole supports reliable screw clamping. Clear, standardised geometry simplifies tool setup and reduces the risk of incorrect assembly, delivering stable cutting conditions and reproducible component tolerances. Improved component finish and efficient chip control A double-sided chipbreaker designed for the T5105 grade provides stable chip formation when machining cast iron, promoting controlled evacuation and reduced risk of built-up edge. The 1.2 mm corner radius delivers a balance between edge strength and fine surface finish, helping to achieve the required Ra values with fewer passes. By combining optimised chip control with a robust cutting edge, the insert supports shorter cycle times and consistent part quality — advantages that translate directly into lower per-part machining costs. Practical system considerations for workshop integration This insert is part of a system comprising the ISO indexable insert, a matching external holder or boring bar, and the necessary clamping pad and screws. Selecting the correct chipbreaker and grade for the workpiece material and machining stability is essential: the T5105 grade is recommended for high-speed cast iron operations under stable setups. For shops standardising tooling, this insert simplifies inventory by fitting common holder designs while delivering the benefits of a wear-resistant carbide and proven coating technology. For original Tungaloy TNMG 160412 T5105 inserts and application support, contact Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the optimal grade and holder combination for specific turning tasks Technical data Article number: 6850300 Manufacturer SKU: TUN6850300 Item label: TNMG160412 T5105 Tungaloy-Wendeplatte Intended application: Drehen (turning) Core data Insert designation: TNMG160412 Grade: T5105 Material: Hartmetall (carbide) Coating: CVD-coated Insert size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Insert angle: 60° Special features Triangular insert form Double-sided chipbreaker With cylindrical hole for screw clamping ISO-standardised geometry for holder compatibility Optimised for high-speed machining of cast iron System components: matching holder, clamping pad and screws FAQ Which materials is this insert suitable for? The TNMG 160412 T5105 insert is designed primarily for high-speed machining of cast iron and performs best under stable cutting conditions. How does the T5105 grade affect tool life? The T5105 CVD-coated carbide offers enhanced wear resistance, which extends cutting life and improves consistency of the cutting edge over longer production runs. Is the insert compatible with standard ISO external holders? Yes, the ISO geometry and 60° triangular form ensure compatibility with common external holders and boring bars when matching form, tolerance and fastening are observed. What does the cylindrical hole mean for clamping? The cylindrical hole allows screw-based clamping with a standard mounting screw, providing secure and repeatable clamping when used with the correct pad and tolerance class. Can this insert be rotated or indexed to use both sides? The insert is double-sided; both cutting edges can be indexed to extend productive life before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T5105 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T5105 for extended wear resistance and the 60° geometry with a 1.2 mm corner radius for consistent surface finish in high-speed cast iron turning; order the inserts directly via Metav Werkzeuge or consult their specialists for application support. TNMG160412 T5105 – ISO turning insert, CVD-coated carbide, for cast iron machining (Tungaloy) The TNMG160412 T5105 is an ISO triangular turning insert designed for high-speed external and internal turning of cast iron under stable cutting conditions. CVD-coated carbide grade T5105 Optimised for high-speed cast iron machining Double-sided chipbreaker for reliable chip control ISO TNMG 160412 triangular form High-speed performance with controlled wear The insert combines a CVD-coated carbide substrate with a wear-focused grade to deliver consistent cutting life during elevated cutting speeds. The CVD coating increases surface hardness and thermal stability, helping to reduce flank and crater wear in demanding cast iron operations. This results in longer intervals between indexings and predictable toolchange cycles, which supports efficient shop-floor planning and reduces unplanned downtime. Geometric consistency for predictable surface quality A 60° seating geometry coupled with a corner radius of 1.2 mm provides a reliable contact pattern that improves stability and part finish. The triangular form and standard ISO dimensions mean that toolholder compatibility is determined by seat form, clearance angle and thickness; the insert is supplied with a central cylindrical hole for secure clamping. The design supports repeatable part quality and reduced vibration when mounted correctly in matching TNMG holders. Chip control and practical handling benefits The double-sided chipbreaker and two usable cutting edges per side offer efficient chip formation and extended tool life per index. The insert thickness of 4.76 mm and the triangular 16 mm size ensure sufficient edge strength for interrupted cuts and moderate depths of cut. Replacement and indexing are straightforward in standard ISO toolholders, which simplifies inventory management and keeps changeover times short. For tailored recommendations on integrating the TNMG160412 T5105 into current toolpackages, contact Metav Werkzeuge for application advice and stock availability Technical Data Article number: 6853019 SKU: 6853019-Tungaloy Manufacturer SKU: TUN6853019 Material: Carbide Model series: ISO turning inserts Label: TNMG160412 T5105 Tungaloy insert Facts Corner radius: 1.2 mm Seat angle: 60° Clearance (relief) angle: 0° Thickness: 4.76 mm Size: 16 mm Special features CVD-coated carbide, grade T5105 Double-sided chipbreaker Triangular plate form (TNMG) Central cylindrical hole for clamping ISO-compatible turning insert Intended for high-speed cast iron machining Application: turning (external and internal) FAQ What materials is this insert optimised for? The TNMG160412 T5105 insert is optimised for high-speed machining of cast iron; the CVD-coated carbide composition supports wear resistance under those conditions. Can the insert be used in standard TNMG holders? Yes, the insert is ISO TNMG 160412 form and is compatible with holders that match the 60° seat, 16 mm size and 4.76 mm thickness specification. How does the double-sided chipbreaker benefit production? The double-sided chipbreaker on the TNMG160412 T5105 improves chip control and allows use of multiple cutting edges, increasing usable tool life per insert and reducing index changes. Is this grade suitable for interrupted cuts or heavier feeds? The combination of a robust 4.76 mm thickness and a 1.2 mm corner radius gives the insert adequate edge strength for interrupted cuts and moderate depths of cut in cast iron applications. How should compatibility with a toolholder be verified? Compatibility should be checked against holder seat form, clearance angle, tolerance class, fixing method and plate thickness; the insert’s ISO designation and central cylindrical hole facilitate secure clamping in matching holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T5105 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, a double-sided chipbreaker and precise 60° geometry for reliable, high-speed turning of cast iron; order supply through Metav Werkzeuge or consult our specialists for application support. TNMG 160412 T5105 indexable turning insert by Tungaloy — CVD-coated carbide, 60° geometry for turning TNMG160412 T5105 is an indexable turning insert crafted for high-speed machining of cast iron in stable setups, designed to fit ISO-compatible holders and bores. CVD-coated carbide for wear resistance Double-sided chipbreaker for controlled chips 60° triangular form for versatile turning Cylindrical hole for secure clamping Durable, high-performance cutting for efficient turning The insert is manufactured from CVD-coated carbide, giving a hard, wear-resistant surface that extends tool life under elevated cutting speeds. This indexable turning insert is optimised for machining cast iron at high speeds when machine and workpiece stability are assured. The result is a consistent cutting edge behaviour and improved process reliability, which reduces unplanned downtime and supports predictable cycle times. Secure mounting and geometry that improve productivity A 60° geometry in a triangular format provides good versatility for external and internal turning; the cylindrical hole ensures firm fixing in ISO-compatible holders. The combination of a stable insert body and a double-sided chipbreaker helps to direct chips away from the cutting zone and maintain surface quality. For shops evaluating holder compatibility, attention to form, clearance angle, tolerance class, attachment method, size and thickness is essential to ensure correct fit and repeatable performance. Explainable benefits for production planners and operators The CVD coating is a chemical vapour deposition layer that binds a wear-resistant ceramic to the carbide substrate, improving heat resistance and edge life without compromising toughness. The moderate corner radius of 1.2 mm helps to balance edge strength and surface finish, making the insert suitable for finishing passes as well as more aggressive cuts when conditions allow. For applications prioritising process security and productivity, this solution delivers stable cutting behaviour and lengthened service intervals. For tailored advice on how this Tungaloy insert fits your turning process, or to arrange immediate supply via Metav Werkzeuge, please contact our technical team at Metav Werkzeuge for application-focused consultation and stock availability. Technical Data Article number: 6850297 SKU: 6850297-Tungaloy Manufacturer SKU: TUN6850297 Manufacturer: Tungaloy Facts Geometry angle: 60° Corner radius: 1.2 mm Thickness: 4.76 mm Inscribed circle / size: 16 mm Special features Material: carbide Coating: CVD-coated Chipbreaker: double-sided Plate shape: triangular Hole style: cylindrical hole Model series: ISO turning indexable inserts Typical use: turning of cast iron at high speed in stable conditions FAQ What materials is this insert suitable for? The TNMG160412 T5105 insert by Tungaloy is intended primarily for high-speed machining of cast iron under stable conditions; the CVD-coated carbide substrate provides wear resistance appropriate for such materials. How does the double-sided chipbreaker affect machining? The double-sided chipbreaker on this indexable turning insert improves chip control and evacuation, supporting consistent surface finishes and reducing chip-related interruptions during turning operations. Which holder types are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, attachment method, size and thickness; the TNMG160412 fits ISO-compatible external holders and boring bars designed for triangular 60° inserts. What are the key dimensions to verify before ordering? Confirm the inscribed circle/size (16 mm), thickness (4.76 mm), corner radius (1.2 mm), hole style (cylindrical) and the ISO designation TNMG160412 to ensure correct fit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T5115 Wendeplatten - Tungaloy
The combination of a CVD-coated cemented carbide grade and a 60° triangular geometry ensures stable cutting edges and consistent performance in cast-iron turning, while the ISO conformity simplifies tool selection and holder matching. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TNMG 160412 T5115 — TNMG160412 T5115 indexable insert for Turning by Tungaloy The TNMG160412 T5115 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised for cast-iron machining with a balanced mix of wear resistance and edge stability. Triangle insert with 60° geometry CVD-coated cemented carbide grade T5115 Double-sided chipbreaker, with cylindrical hole Optimised for cast-iron turning Increased process efficiency through edge stability and coating The combination of a CVD-coated cemented carbide and the T5115 grade delivers a durable cutting edge that withstands fluctuating loads during roughing and finishing passes. This results in lower tool consumption and longer edge life, translating into fewer interruptions for tool changes and a higher overall spindle utilisation. The coating improves thermal stability and reduces adhesive wear when machining abrasive cast-iron alloys, enabling consistent dimensional accuracy over extended cycles. The design supports predictable tool life, which helps to plan batch runs and reduce unexpected downtime. More consistent chip control for cleaner surfaces and fewer reworks A double-sided chipbreaker combined with the insert's triangular form and a cylindrical hole improves chip formation and evacuation, particularly in interrupted cuts common with cast-iron components. Better chip control reduces the risk of re-cutting, protects the cutting edge and contributes to superior surface quality without aggressive feeds. Stable chip flow also lowers the risk of built-up edge and avoids unplanned machine stops, supporting shorter cycle times and fewer manual interventions for chip clearing. Straightforward integration into ISO tool systems for flexible setups The ISO designation and standard dimensions make mounting and replacing the insert in compatible holders simple: compatibility is determined by shape, clearance angle, tolerance class, fixing method, size and thickness. The 60° geometry and 1.2 mm corner radius suit a range of turning tasks from light finishing to robust roughing when paired with the appropriate holder and machining parameters. Using ISO-standard inserts helps maintain stock rationalisation and speeds up tooling changes on multiple machines, supporting a lean shopfloor strategy and predictable process planning. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy TNMG160412 T5115 into production setups or to request a technical specification for specific cast-iron applications via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6850298 SKU (manufacturer): TUN6850298 Brand: Tungaloy Material: Cemented carbide Core dimensions ISO designation: TNMG160412 Insert size: 16 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Geometry angle: 60° Hole: with cylindrical hole Features & applications Grade/coating: T5115, CVD-coated Typical application: Turning (external and internal) Optimised for: Cast iron machining Chipbreaker: Double-sided Insert form: Triangular (three cutting edges) FAQ What materials is this insert intended for? The TNMG160412 T5115 insert is optimised for machining cast iron; the CVD-coated cemented carbide and T5115 grade balance wear resistance and edge stability for this material group. Which toolholders fit this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness; the ISO TNMG160412 designation allows selection of matching external holders or boring bars complying with the standard. How does the chipbreaker design affect performance? The double-sided chipbreaker ensures controlled chip formation and evacuation, improving surface finish and minimising the risk of re-cutting in interrupted cuts typical of cast-iron turning. Is the insert indexable and reversible? Yes, the triangular shape provides multiple cutting edges per insert; the double-sided design supports reuse after indexing, improving economy in series production. What information is needed to replace an existing insert? Provide the ISO designation (TNMG160412), grade (T5115), corner radius and plate thickness to ensure the replacement insert matches the holder and machining task. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T5115 Wendeplatten - Tungaloy
Take advantage of the balanced CVD-coated carbide grade and robust triangular geometry for consistent turning of cast-iron components; order genuine parts through Metav Werkzeuge or consult our technical team for holder compatibility. TNMG 160412 T5115 turning insert (ISO) – CVD-coated carbide, 60° triangle (Tungaloy) TNMG160412 T5115 is an ISO-standard turning insert designed for external and internal turning of cast iron, offering a universal CVD-coated carbide grade for a reliable balance of wear resistance and edge stability TNMG 60° triangular form for robust indexing CVD-coated carbide grade T5115 for cast iron Double-sided chipbreaker for versatile turning 1.2 mm corner radius for consistent edge strength High-performance coating and material for longer tool life The combination of a CVD-coated surface and a carbide substrate provides the primary advantage in prolonged production runs. The T5115 grade is formulated as a universal option for cast iron, delivering a favourable balance between wear resistance and edge stability. The protective coating reduces abrasive wear and helps maintain a consistent cutting edge, which in turn supports predictable component tolerances and extended service intervals in serial manufacturing. This leads to fewer interruptions for insert changes and improved process efficiency. Precise geometry and secure clamping for repeatable results The triangular TNMG geometry with a 60° angle and a 1.2 mm corner radius yields a reliable compromise between strength and accessibility to turned contours. The insert is double-sided, enabling economical indexing, and features a cylindrical hole for positive location in compatible holders. As ISO-standardised turning inserts depend on form, relief angle, tolerance class, fastening method, size and thickness for compatibility, the specified 4.76 mm plate thickness and ISO designation ensure correct selection of mating external holders or boring bars. This precision in geometry translates into repeatable surface finishes and machining stability. System approach for efficient workshop integration Integration into an existing turning system is straightforward: match the insert with a suitable external holder or boring bar, add the correct clamping set and replacement screws, and select the double-sided chipbreaker style and grade matched to workpiece stability. The insert’s universality for cast iron reduces inventory complexity while maintaining flexibility for different turning tasks. For complex setups or when adapting to varied workpiece conditions, technical consultants at Metav Werkzeuge provide assistance on holder choice and process optimisation, helping to secure a cost-efficient and productive turning operation. Contact Metav Werkzeuge to confirm holder compatibility and to procure genuine Tungaloy TNMG 160412 T5115 inserts; technical support and ordering via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 6853020 Manufacturer SKU: TUN6853020 SKU: 6853020-Tungaloy ISO designation: 160412 Numbers / Core technical data Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 16 mm Insert angle: 60° Relief angle: 0° Designs / Special features Material: carbide Coating/grade: T5115 (CVD-coated) Plate shape: triangular Chipbreaker: double-sided Mounting: with cylindrical hole Intended application: turning Series: ISO turning inserts FAQ What materials is this insert best suited for? The Tungaloy TNMG 160412 T5115 insert is optimised as a universal grade for cast iron, providing a balanced combination of wear resistance and edge stability for turning applications. How many usable edges does the insert provide? With its double-sided configuration and triangular form, the insert offers multiple usable edges, enabling economical indexing and prolonged life before replacement. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the TNMG 160412 designation fits holders designed for ISO TNMG inserts when dimensions and mounting match. Does the coating improve performance in high-wear applications? The CVD-coated carbide T5115 enhances abrasive wear resistance and helps maintain cutting-edge stability, which benefits high-wear turning of cast-iron components. Is the insert suitable for internal turning as well as external turning? Yes, the insert’s geometry and chipbreaker variants make it suitable for both external and internal turning when paired with an appropriate boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T5115 Wendeplatten - Tungaloy
Take advantage of the ISO conformity, CVD-coated cemented carbide grade T5115 and the robust 1.2 mm corner radius for consistent performance when turning cast iron; order original parts via Metav Werkzeuge or consult the product specialists for application guidance. TNMG160412 T5115 — ISO turning indexable insert, CVD-coated carbide (Tungaloy) The TNMG160412 T5115 is an ISO-standard triangular indexable insert engineered for external and internal turning of cast iron, combining a balanced wear resistance and edge stability for productive machining. TNMG 160412 profile, 60° cutting geometry CVD-coated carbide T5115 for cast iron 1.2 mm corner radius for stable cutting Double-sided chipbreaker, cylindrical hole Durable grade for dependable cast-iron turning The CVD-coated cemented carbide grade T5115 offers a balanced mix of wear resistance and edge stability, which translates into longer tool life and fewer interruptions to the machining cycle. As a ISO-compliant insert, the component supports standardised toolholders and simplifies tool inventory. The coating reduces abrasive wear on grey and nodular cast iron, while the substrate preserves edge geometry under interrupted cuts, delivering consistent surface quality and predictable regrinding intervals. Geometry and clamping that ensure process reliability Featuring a triangular insert shape with a 60° approach angle and a 1.2 mm corner radius, this insert provides a compromise between edge strength and dimensional control. The 4.76 mm plate thickness and the cylindrical hole permit secure clamping in compatible holders, while the 0° relief angle supports neutral cutting conditions for many turning operations. These dimensional and geometric parameters are decisive for achieving stable cutting forces and reliable chip formation when paired with an appropriate holder and clamping set. Practical advantages in workshop use and selection The double-sided chipbreaker construction enables indexation to fresh cutting edges, improving uptime and reducing tooling cost per part. As part of a system comprising the ISO insert, matching external holder or boring bar, and standard clamping components, the insert should be selected together with the chipbreaker and grade according to workpiece material and machine stability. Compatibility depends on form, relief angle, tolerance class, fastening type, size and thickness, so a coordinated selection ensures efficient chip control and predictable tool life. For professional turning of cast iron, choose original Tungaloy TNMG160412 T5115 inserts and contact Metav Werkzeuge for stock availability or application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6850301 SKU: 6850301-Tungaloy Manufacturer SKU: TUN6850301 Brand: Tungaloy Dimensions & measurable data Corner radius: 1.2 mm Insert size: 16 mm Plate thickness: 4.76 mm Cutting geometry/angle: 60° Relief angle: 0° Features & materials Material: cemented carbide Grade/coating: T5115, CVD-coated Shape: triangular (TNMG) Hole: with cylindrical hole Chipbreaker: double-sided Intended application: turning (external and internal) Model series: ISO turning indexable inserts FAQ What materials is this insert designed for? The TNMG160412 T5115 by Tungaloy is a universal grade optimised for machining cast iron, offering a balanced combination of wear resistance and edge stability for those materials. How does the insert secure to the holder? The insert features a cylindrical hole for positive clamping; secure fixing requires a compatible holder and correct fastening that match the TNMG160412 form, size and thickness. What benefit does the 1.2 mm corner radius provide? A 1.2 mm corner radius increases edge robustness under intermittent cuts and improves dimensional stability compared with finer radii, helping to extend the effective life of the turning edge. Is the chip control suitable for interrupted cuts? The double-sided chipbreaker on this indexable insert aids chip formation and evacuation; combined with the T5115 grade, it supports stable performance even in semi-stable cutting conditions typical for cast iron turning. How should the insert be matched to a toolholder? Compatibility requires matching form, relief angle, tolerance class, fastening method, size and thickness; the TNMG160412 designation and the ISO model series simplify selection for standardised holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade for improved wear resistance, a double‑sided chipbreaker for reduced inventory needs, and ISO conformity for straightforward holder compatibility; order the TNMG160412 T5125 insert directly via Metav Werkzeuge or consult the technical advisors for application support. TNMG160412 T5125 — Indexable turning insert for cast iron, CVD‑coated, Tungaloy A TNMG160412 T5125 indexable insert engineered for external and internal turning applications, optimised for interrupted cuts and less stable machining conditions. CVD‑coated carbide grade T5125 Suitable for interrupted cuts in cast iron Double‑sided chipbreaker, triangular format 0° relief angle and 60° geometry Consistent chip control for interrupted turning The insert delivers improved process reliability by combining a double‑sided chipbreaker with a tougher CVD coating. This arrangement promotes stable chip formation during interrupted cuts and variable clamping conditions, so the cutting edge retains its geometry for longer. For production environments where cuts are frequently interrupted or setup rigidity is limited, the result is fewer tool changes and steadier component quality. The chipforming design also helps to reduce rework and secondary operations. Seamless integration with ISO tooling systems Manufactured to established ISO dimensions, the triangular insert fits standard external holders and boring bars when matched by form, rake and tolerance class. The presence of a central, cylindrical hole ensures secure fastening and repeatable seating in the clamping set, while the double‑usable faces lower stocking needs. Because compatibility depends on holder form, size and thickness, confirmation of the corresponding external holder and clamping set ensures correct fitment and consistent cutting performance. Material and coating engineered for cast iron performance The cutting grade is a CVD‑coated carbide specifically selected for enhanced resistance against edge chipping under interrupted loads. The tougher composition suits the machining of cast iron, where hard inclusions and fluctuating cutting forces are common. CVD (chemical vapour deposition) provides a dense coating layer that resists abrasive wear and helps maintain a stable cutting edge, translating into extended life and reliable surface finish on workpieces that would otherwise accelerate wear on more delicate grades. Geometry and practical benefits for workshop efficiency With a 60° triangle geometry, a 1.2 mm nose radius and a 0° relief angle, the insert balances strength and profile accuracy for a range of turning tasks. The triangular form offers three usable cutting edges per side and simplifies inventory management, while the moderate nose radius supports dimensional control without compromising edge robustness. In short runs or mixed‑batch production the combination of durable grade and multi‑edge utilisation contributes to lower tooling cost per part and faster changeovers. For application advice or to source original Tungaloy indexable inserts such as the TNMG160412 T5125, contact Metav Werkzeuge for precise recommendations and ordering: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: 6850302 SKU: 6850302-Tungaloy Manufacturer SKU: TUN6850302 Manufacturer: Tungaloy Core data Radius: 1.2 mm Inscribed circle (size): 16 mm Thickness: 4.76 mm Cutting angle: 60° Relief angle: 0° Special features ISO indexable turning insert series Grade: T5125 Coating: CVD‑coated carbide Shape: triangular Chipbreaker: double‑sided Hole: with cylindrical hole Application: turning (external and internal) Optimised for cast iron and interrupted cuts FAQ What materials is this insert designed to machine most effectively? The TNMG160412 T5125 insert is formulated for machining cast iron; the T5125 CVD‑coated carbide provides toughness and wear resistance suited to interrupted cuts in cast iron workpieces. Can the insert be used on both external and internal turning operations? Yes, the indexable insert is intended for both external and internal turning when paired with the appropriate external holder or boring bar that matches the ISO dimensions and clamping requirements. How does the double‑sided chipbreaker affect tool life and inventory? A double‑sided chipbreaker allows multiple cutting edges to be used before disposal, extending effective tool life per insert and reducing the number of different items to keep in stock. What should be checked to ensure correct holder compatibility? Compatibility requires matching the insert form, free angle, tolerance class, fastening method, size and thickness to the chosen holder and clamping set; verify these parameters against the TNMG160412 specification. Is the TNMG160412 T5125 suitable for unstable clamping conditions? The tougher CVD‑coated carbide grade and chip control features make the TNMG160412 T5125 more forgiving in less stable setups compared with more wear‑focused grades Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T5125 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide performance and robust chip control for reliable turning under interrupted cutting conditions; order the insert via Metav Werkzeuge or contact our consultants for application advice. TNMG 160412 T5125 turning insert by Tungaloy — CVD-coated carbide for interrupted cuts, ISO TNMG triangular form TNMG160412 T5125 is a precision turning insert designed for external and internal turning where interrupted cuts or less stable setups demand a tougher grade and consistent chip control CVD-coated carbide grade T5125 Designed for interrupted cuts ISO TNMG triangular form 0° relief angle, 60° insert angle Stable performance when machining under unstable conditions The CVD-coated, carbide construction with grade T5125 offers a balance of toughness and wear resistance that suits less rigid setups and interrupted cuts. The composition of the cutting material favours stable chip formation and reduces flank wear in stop‑start machining cycles, which translates into fewer tool changes and a more consistent cycle time. Specified geometry such as the 1.2 mm corner radius helps to distribute cutting forces while maintaining component integrity, making this insert effective for cast iron turning where impacts or vibrations can occur. Quick integration with ISO tooling systems for efficient setup Compatibility is ensured by the ISO TNMG designation and the triangular ISO TNMG form, so the insert fits standard external holders or boring bars that accept TNMG plates. The central cylindrical hole and standard thickness simplify fixture and clamping arrangements, reducing setup time. With a 0° relief angle and a 60° insert approach, the geometry supports predictable cutting loads and straightforward positioning in most turning toolholders, improving throughput without custom tooling modifications. Chip control and edge life explained for process reliability The double‑sided chipbreaker provides repeatable chip formation and helps evacuate swarf even in interrupted or discontinuous cuts, lowering the risk of built-up edge and surface damage. The CVD-coated surface adds thermal and abrasive resistance, which protects the cutting edge under variable cutting speeds. For production runs where process security is a priority, the combination of coating, grade and chipbreaker design contributes to longer effective edge life and more predictable maintenance intervals. Where this insert brings the most value This insert is particularly suited to turning operations on cast parts and similar materials where occasional interruptions occur and robust performance is required. The plate’s 4.76 mm thickness and standard 16 mm size support stable seating in toolholders, while the specified corner radius and double-sided use maximise economy per indexable edge. In short runs and mixed‑batch production the insert reduces downtime and supports consistent surface quality, helping to keep machining processes both efficient and repeatable. For reliable machining with Tungaloy’s T5125 grade, contact Metav Werkzeuge to discuss the TNMG 160412 application and order assistance — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and purchasing. Technical Data Article number: 6850299 SKU (manufacturer): TUN6850299 Model series: ISO-Drehwendeschneidplatten Product name: TNMG160412 T5125 Tungaloy insert Facts Insert size: 16 Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Insert angle: 60° Special features Material: carbide Coating/type: CVD-coated Grade: T5125 Shape: triangular Hole: with hole (cylindrical hole) Chipbreaker: double-sided Application: turning (external and internal) FAQ What materials is this insert suited for and why? The TNMG160412 T5125 insert is designed for cast materials and similar workpieces; the CVD-coated carbide grade T5125 provides toughness that helps withstand interrupted cuts and variable cutting conditions. How is chip control achieved with this insert? Chip control is handled by the double-sided chipbreaker integrated into the plate geometry, which promotes consistent swarf formation and evacuation during turning operations. Can this insert be used in standard TNMG holders? Yes, the triangular ISO TNMG form and central cylindrical hole allow mounting in compatible TNMG external holders and boring bars meeting ISO specifications. How many usable edges does the insert offer? The plate is double-sided, providing multiple indexable cutting edges to extend service life before replacement. Is this insert suitable for finishing or roughing operations? The combination of 1.2 mm corner radius and robust grade makes the insert versatile; it can be used for semi-finishing and roughing where interrupted cuts are present, while offering reasonable surface results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T5125 Wendeplatten - Tungaloy
Combine the CVD-coated carbide grade T5125 with a 60° triangular geometry and a 1.2 mm corner radius for dependable performance in interrupted turning; order the inserts directly via Metav Werkzeuge or consult our advisers for application-specific selection. TNMG160412 T5125 Turning insert (ISO triangle) — Tungaloy The TNMG160412 T5125 is an ISO-standard triangular turning insert designed for external and internal turning, offering a robust solution for interrupted cuts and less stable machining conditions. CVD-coated carbide for high wear resistance 60° triangular geometry for stable cutting Double-sided chipbreaker for flexible use Suitable for interrupted turning in cast iron Consistent performance in interrupted turning The combination of a CVD-coated substrate and the T5125 grade provides a tougher carbide matrix that resists edge chipping during interrupted cuts. This makes the insert particularly suitable for machining cast iron where cut engagement can vary. The geometry reduces the likelihood of premature edge failure, improving process reliability and reducing unexpected downtime. Selecting this insert helps maintain consistent material removal rates and surface quality even under less stable clamping or interrupted machining cycles. ISO compatibility for straightforward tool selection Being an ISO-standard indexable insert, the triangular shape with a 60° included angle simplifies holder selection and inventory management. Compatibility is determined by form, relief angle, tolerance class, fastening and the insert’s size and thickness; this insert features a triangle form, a cylindrical hole for secure clamping, and a plate thickness of 4.76 mm, ensuring stable seating in appropriately matched external holders or boring bars. Clear ISO designation streamlines procurement and guarantees interchangeability across standard tool systems. Durability and process stability for productive turning A double-sided chipbreaker and the 1.2 mm corner radius balance cutting strength and edge life: the breaker supports chip control across a range of feed rates while the modest corner radius offers strength against impact without sacrificing achievable surface finish. The carbide base with its CVD layer delivers consistent wear resistance, contributing to longer tool life and predictable tool-change intervals. When combined with suitable cutting data and a matched holder, the insert supports higher productivity and repeatable results in series production. Choosing the right setup for best results Select the chipbreaker and insert grade according to workpiece material and stability of the setup; the tougher T5125 grade is intended for less stable conditions and interrupted cuts in cast iron. Where higher stability and continuous cuts are present, other grades or finer chipformers may improve surface finish and cycle times. Ensure the clamping set, backing pads and fixing screws conform to the holder’s tolerance class to maintain repeatable seating and minimise vibration. For reliable interrupted turning with Tungaloy’s T5125 grade, contact Metav Werkzeuge for tailored advice and to secure the TNMG160412 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6853021 Manufacturer SKU: TUN6853021 ISO designation: TNMG160412 Model series: ISO turning inserts Application: Turning Material: Carbide (Hartmetall) Grade/coating: T5125 (CVD-coated) Facts Corner radius: 1.2 mm Plate thickness: 4.76 mm Inscribed circle: 16 mm Relief angle: 0° Included angle: 60° Special features Triangle plate form Cylindrical hole for clamping Double-sided chipbreaker ISO-standard indexable insert Suited to interrupted turning in cast iron System: insert plus matching external holder, backing pad and clamping set FAQ What materials is this insert suitable for? The TNMG160412 T5125 insert is designed primarily for cast iron applications and excels in interrupted machining or less stable conditions due to its tougher CVD-coated carbide grade. How is the insert clamped in the holder? Clamping is achieved via the cylindrical hole and the matching holder’s fastening system; correct backing pad and screw torque are essential for secure seating and repeatable positioning. Can this insert be used on internal turning jobs? Yes — the ISO triangular form and the double-sided chipbreaker make the insert suitable for both external and internal turning operations, provided the holder geometry permits safe clearance. What advantage does the 1.2 mm corner radius offer? A 1.2 mm corner radius enhances edge strength for interrupted cuts while still enabling acceptable surface finish; it is a compromise between robustness and finish quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T515 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade T515, a 60° triangular geometry and a 1.2 mm corner radius makes this insert a cost-effective choice for stable cast-iron turning operations; order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. TNMG 160412 T515 TNMG – ISO turning insert for Drehen by Tungaloy, CVD-coated carbide, 60° The TNMG160412 T515 is a triangular ISO turning insert designed for economical external and internal turning of cast iron, offering a robust, double-sided chipbreaker and a 1.2 mm corner radius for repeatable edge life. CVD-coated carbide grade T515 Triangular 16 mm insert geometry Double-sided chipbreaker design 1.2 mm corner radius for robustness Reliable material removal for cast iron with predictable tool life The CVD-coated carbide grade T515 provides a balance between wear resistance and economical cutting performance when machining cast iron. The coating enhances thermal stability and reduces flank wear, which in practice means longer periods between indexings and less machine downtime. For operations with moderate to high cutting speeds, the combination of a coated cemented carbide substrate and a dedicated chipbreaker yields consistent chip control and surface finish, reducing rework and assembly delays. Stable geometry that supports process security and quick indexability A 60° triangular cutting shape with a corner radius of 1.2 mm and a 4.76 mm plate thickness delivers mechanical stability in interrupted and continuous cuts. The insert is double-sided, offering two usable cutting edges per side and permitting faster tool changes through simple indexing. The presence of a cylindrical central hole secures positive clamping and ensures positional repeatability in compatible ISO holders; matching of form, clearance angle, tolerance class, fastening and thickness determines holder compatibility. Practical benefits and selection guidance for workshop use When selecting the grade and chipbreaker, prioritise workpiece stability and the nature of the cut: the presented chipbreaker suits general cast-iron turning where reliable chip evacuation is essential. A 0° clearance angle supports close control of the tool–workpiece engagement and can help maintain dimensional accuracy under load. For less experienced operators, the insert’s geometry simplifies set-up and helps achieve repeatable part quality with minimal trial runs. Contact Metav Werkzeuge for a tailored recommendation on fixtures and cutting data or to obtain the TNMG 160412 T515 insert and compatible holders Technical data Article number: 6733836 SKU: 6733836-Tungaloy Manufacturer SKU: TUN6733836 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 60° Clearance angle: 0° Hole: with hole (cylindrical) Special features CVD-coated carbide grade T515 Double-sided chipbreaker Triangular plate shape Designed for cast iron machining ISO-standardised turning insert Compatibility depends on holder form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert optimised for? The TNMG160412 T515 insert is optimised for machining cast iron, with a CVD-coated carbide composition that supports thermal stability and wear resistance in these applications. How does the chipbreaker affect performance? The double-sided chipbreaker on this insert improves chip control during turning operations, reducing the risk of entanglement and helping to maintain surface quality on interrupted and continuous cuts. Which holder features are required for correct fitment? Compatibility requires a matching holder that corresponds to the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; the central cylindrical hole ensures positive clamping when the correct ISO holder is used. How many usable edges does the insert provide? As a double-sided triangular insert, the TNMG160412 T515 offers multiple indexable edges, enabling several repositions before replacement and supporting cost-effective tool usage. Is this grade suitable for interrupted cuts? Yes, the combination of a robust 1.2 mm corner radius and CVD-coated carbide makes this insert suitable for many interrupted cutting scenarios typical in cast-iron turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com