TNMG 160412 T515 Wendeplatten - Tungaloy
TNMG160412 T515 Wendeplatte zum Drehen von Tungaloy Die TNMG160412 T515 Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für wirtschaftliche Außen- und Innendrehprozesse an Gusseisen. ISO-genormt für einfache Halterkompatibilität CVD-beschichtetes Hartmetall für lange Standzeit Speziell ausgelegt für wirtschaftliche Gusseisenbearbeitung Dreieckige Platte mit Eckenradius 1,2 mm Zylindrisches Loch und doppelseitiger Spanbrecher Effizienzsteigerung bei der Gusseisenbearbeitung Die Kombination aus CVD-Beschichtung und hochwertigem Hartmetall sorgt für eine hohe Wirtschaftlichkeit bei Serien- und Einzelfertigung. Durch die optimierte Sortenwahl T515 lässt sich die Standzeit gegenüber unbeschichteten Lösungen deutlich verlängern, was Ausfallzeiten reduziert und die Produktivität erhöht. Die gezielte Abstimmung auf Gusseisen bedeutet, dass weniger Werkzeugwechsel nötig sind und die Bearbeitungszeit pro Bauteil sinkt. Materialaufbau und Technische Vorteile Der Schneidstoff ist CVD-beschichtetes Hartmetall; CVD steht für chemische Dampfabscheidung und bietet eine verschleißfeste, haftfeste Beschichtungsschicht, die Schnittkanten stützt und thermische Belastungen abmildert. Der Eckenradius von 1,2 mm ermöglicht stabile Spanbildung bei Außen- und Innendrehen. Die Plattendicke von 4,76 mm und die dreieckige Form tragen zur Wiederverwendbarkeit der Schneidkanten bei und steigern die Wirtschaftlichkeit durch multiple Schneidkanten. Geometrie, Kompatibilität und Einsatzszenarien Dank ISO-Norm ist die TNMG160412 in vielen Haltern sofort einsetzbar; die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Der Freiwinkel von 0° und der Keilwinkel von 60° sind typisch für robuste Drehanwendungen. Das zylindrische Loch vereinfacht die Fixierung mit Standard-Klemmsätzen. Für optimale Resultate sollte der Spanbrecher passend zur Stabilität und Schnittunterbrechung gewählt werden. Auswahlhilfe, Anwendernutzen und Service Die Wendeplatte richtet sich an Zerspaner in der Serienfertigung und Werkstätten, die auf zuverlässige Ergebnisse und niedrige Stückkosten achten. Wenn Unsicherheit bei der Halterwahl oder bei Schnittdaten besteht, hilft die technische Beratung gern weiter; passende Halter, Unterlagen und Befestigungsmaterial sind Teil des Systemaufbaus. Die klare Sortenbezeichnung T515 erleichtert die Zuordnung für Einkäufer und Fertigungsplaner. Setzen Sie auf die Tungaloy TNMG160412 T515 Wendeplatte für wirtschaftliche Gusseisenbearbeitung — Bei Fragen stehen wir Ihnen unter 📧 info@metav-werkzeuge.com oder ☎️ +49 2822 7131930 zur Verfügung Produktmerkmale Artikelnummer: 6747820 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: TNMG160412 T515 Hersteller SKU: TUN6747820 Fakten Eckenradius: 1,2 mm Plattendicke: 4,76 mm Plattengröße: 16 mm Winkel: 60° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet (Chemische Dampfabscheidung) Sorte: T515 Spanbrecher: doppelseitig Plattenform: dreieckig Lochstil: zylindrisches Loch Einsatz: Drehen Anwendung: wirtschaftliche Bearbeitung von Gusseisen Norm: ISO-genormt FAQ Für welche Werkstoffe ist die Wendeplatte geeignet? Die TNMG160412 T515 Wendeplatte von Tungaloy ist speziell für die wirtschaftliche Bearbeitung von Gusseisen ausgelegt und liefert dabei stabile Spanbildung und gute Oberflächengüte. Welche Halter passen zur TNMG160412 T515? ISO-genormte Außenhalter und Bohrstangen, die Form, Freiwinkel, Größe und Dicke der TNMG160412 unterstützen, sind kompatibel; bei Unsicherheit empfiehlt sich die Abfrage der Toleranzklasse beim Fertigungsplaner oder beim Lieferanten. Was bedeutet CVD-beschichtet und welchen Vorteil bietet das? CVD steht für chemische Dampfabscheidung; die CVD-Beschichtung der TNMG160412 T515 erhöht die Verschleißfestigkeit und schützt die Schneidkante gegen thermische Belastung, was zu längeren Standzeiten führt. Wie beeinflusst der Eckenradius die Bearbeitung? Ein Eckenradius von 1,2 mm sorgt für stabile Spanbildung und reduziert Vibrationen bei dynamischen Schnitten; er ist eine sinnvolle Balance zwischen Schneidkante und Zähigkeit. Welche Rolle spielt der doppelseitige Spanbrecher? Der doppelseitige Spanbrecher der TNMG160412 sorgt für kontrollierten Spanfluss bei unterschiedlichen Schnittbedingungen und erhöht die Prozesssicherheit bei wechselnden Schnittbedingungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG 160412 T515 Wendeplatten - Tungaloy
Take advantage of a combination of economical wear resistance and proven chip control: the CVD-coated carbide grade T515 ensures productive machining of cast iron while the 1.2 mm corner radius delivers stable surface quality and reproducible tool life. Order the insert directly via Metav Werkzeuge or ask the consultants for selection and stock information. TNMG 160412 T515 Turning insert (ISO TNMG160412) by Tungaloy The TNMG 160412 T515 is an ISO-standard triangular indexable insert designed for external and internal turning of cast iron, offering a CVD-coated carbide grade optimised for economical, high-productivity cuts. CVD-coated carbide for economical cast-iron machining ISO TNMG160412 triangular insert, 60° geometry Double-sided chipbreaker for stable chip control 1.2 mm corner radius with cylindrical hole mounting Consistent, economical machining for cast iron components The CVD-coated carbide grade T515 is formulated to balance tool life and cost-efficiency when machining cast iron, making it suitable where stable cutting and predictable performance are required. The coating reduces adhesive wear and improves thermal resistance, so the insert sustains higher cutting speeds without premature degradation. The net effect is fewer index changes, less downtime and a noticeable reduction in per-part tooling cost while maintaining the required surface quality. Straightforward fitment and reliable clamping for quick tool changes Designed to the ISO TNMG160412 specification, this triangular insert features a 60° geometry, a cylindrical hole and a nominal thickness of 4.76 mm, ensuring compatibility with a wide range of standard external holders and boring bars. Because compatibility depends on form, clearance angle, tolerance class, fastening and size, the ISO conformity simplifies inventory management and reduces setup errors. The double-sided design doubles available cutting edges per insert, which improves economy and reduces handling time. Geometry and chip control deliver predictable results and surface finish With a 1.2 mm corner radius and a double-sided chipbreaker, the cutting edge offers a compromise between strength and finishing capability: the radius stabilises the cutting edge under intermittent cuts, while the chipbreaker manages swarf formation for safer chip evacuation. For workshops less familiar with technical terms, a chipbreaker is a groove or form on the rake face that forces chips to curl and break, preventing long, hazardous swarf and improving surface consistency. The result is a dependable, repeatable process suited to batch production and single-piece machining alike. For specialist advice on toolholder compatibility and to check current availability of the Tungaloy TNMG160412 T515 insert, contact Metav Werkzeuge by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — technical consultancy and order assistance are available promptly Technical data Article number: 6733839 Manufacturer SKU: TUN6733839 SKU: 6733839-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Geometry angle: 60° Clearance (relief) angle: 0° Mounting: cylindrical hole Double-sided cutting edges Special features Coating: CVD-coated Material: carbide Grade: T515 (for cast iron) Plate form: triangular Chipbreaker: double-sided Typical application: external and internal turning of cast iron System: ISO insert, compatible with standard holders, clamping kits and replacement screws FAQ What materials is this insert suited for? The insert is specified for economical machining of cast iron; the T515 CVD-coated grade in the TNMG160412 form is optimised for that application. How does the chipbreaker affect performance? The double-sided chipbreaker on the insert controls chip shape and length, improving evacuation and reducing surface defects during turning operations. Is the insert compatible with standard ISO TNMG holders? Yes, the insert conforms to ISO TNMG160412 dimensions and mounts via a cylindrical hole; compatibility is determined by holder form, clearance angle and tolerance class. How many cutting edges are available per insert? The insert is double-sided, providing multiple indexable cutting edges to extend effective tool life and reduce replacement frequency. What are the key geometry values to consider during setup? Relevant values are the 60° main geometry, 1.2 mm corner radius and 0° clearance angle; these affect cutting forces, finish and tool strength. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a double-sided chipbreaker for economical indexing, and ISO compatibility for predictable clamping. Order the insert via Metav Werkzeuge or contact the technical team for advice to ensure the best chipformer and grade for each turning task. TNMG160412 T6215 turning insert — Tungaloy triangular ISO turning insert for stainless steel TNMG160412 T6215 is an ISO-standard triangular turning insert designed for precision external and internal turning of stainless steels, offering a wear-resistant CVD-coated carbide grade for stable to lightly interrupted cuts. CVD-coated carbide T6215 grade Double-sided chipbreaker for efficient chip control ISO-standard triangular insert with cylindrical hole Corner radius 1.2 mm for reliable edge strength Precise fit and consistent performance for ISO tool systems The insert is designed to the ISO standard, which ensures reproducible seating and clamping when used with compatible external holders and boring bars. That predictable fit reduces setup variation and contributes to consistent part quality. The triangle form and cylindrical hole guarantee secure fixation, while the specified clearance angle of 0° and included angle of 60° support stable cutting geometries. For production environments, these characteristics translate into less rework and a smoother process flow. Material-specific wear resistance and what CVD coating delivers The T6215 grade is a CVD-coated carbide developed for machining stainless steel under stable or slightly interrupted conditions. The CVD layer increases surface hardness and oxidation resistance, improving flank wear behaviour during prolonged runs. For users with moderate feed rates and varying depths of cut, this coating promotes longer edge life compared with uncoated grades. Selecting the correct chipbreaker together with the grade helps to avoid built-up edge and secures surface finish, particularly important when producing components that require tight tolerances. Operational efficiency through multi-edged design and simple handling The double-sided chipbreaker and triangular geometry provide multiple serviceable edges, which reduces tooling cost per cutting edge and minimises downtime for insert changes. With a corner radius of 1.2 mm and a plate thickness of 4.76 mm, the insert offers a balance between edge strength and versatility for general turning operations. The cylindrical hole supports reliable clamping and rapid indexing. For workshops aiming to improve throughput, this combination offers a pragmatic route to repeatable results and lower unit tooling costs. For reliable, economical turning of stainless steel components, order the TNMG160412 T6215 insert through Metav Werkzeuge or request tailored advice from our consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge supports the choice of chipbreaker and holder compatibility to match each application. Technical data Article number: 6944842 Manufacturer SKU: TUN6944842 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core specifications Size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Included angle: 60° Design & features CVD-coated carbide (T6215) Double-sided chipbreaker Triangle shape, with cylindrical hole ISO-standard turning insert Suitable for turning stainless steel FAQ What materials is this insert suitable for? The TNMG160412 T6215 insert is specified for turning stainless steel and is intended for stable to slightly interrupted cutting conditions. How does the T6215 coating benefit production runs? The CVD-coated surface of the T6215 grade increases wear resistance and thermal stability, helping to extend edge life during longer production cycles. Is the insert compatible with standard ISO holders? Yes, the insert is ISO-standard; compatibility depends on matching form, clearance angle, tolerance class, fixation, size and thickness with the selected holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T6215 and a 1.2 mm corner radius for reliable machining of rostfreier Stahl; the ISO TNMG160412 geometry with a double-sided chipbreaker supports extended tool life and predictable chip control. Order the insert via Metav Werkzeuge or contact our consultants for application-specific advice. TNMG160412 T6215 turning insert — Tungaloy, CVD-coated carbide for rostfreier Stahl The TNMG160412 T6215 is an ISO triangular turning insert designed for external and internal turning operations, offering wear-resistant performance for rostfreier Stahl under stable to mildly interrupted cutting conditions. CVD-coated carbide T6215 for wear resistance Triangular 60° insert with 1.2 mm corner radius Double-sided chipbreaker for controlled chips With cylindrical hole, compatible with ISO holders Durable coating and grade for extended service life The combination of a CVD-coated surface and a robust carbide substrate ensures consistent resistance to flank and crater wear in demanding turning tasks. The specified grade, T6215, is engineered for machining rostfreier Stahl where thermal and mechanical load demands are high; the coating reduces built-up edge formation and maintains a stable cutting edge, which translates into fewer indexings and lower tool-change frequency. This yields a direct improvement in machine uptime and predictable process output. Geometry engineered for steady chip control and dimensional accuracy The triangular geometry with a 60° included angle and a corner radius 1.2 mm provides a balance between strength and finishing capability. The double-sided chipbreaker is designed to generate short, controllable chips across a range of feeds, improving swarf evacuation and reducing surface irregularities. The insert’s cylindrical hole and standard ISO dimensions simplify clamping and ensure repeatable seating in compatible holders; attention to form, clearance angle, tolerance class, fastening, size and thickness is essential for optimal assembly and repeatable results. System integration and practical recommendations for production As part of a complete turning system the insert performs best when paired with a matching external holder, support shim and correct clamping set; spare screws should be kept available to reduce downtime. For stable cutting conditions select conservative speeds and feeds for initial trials, then optimise for cycle time once stability is confirmed. The carbide construction and CVD-coated surface support productive machining with reduced regrind intervals, delivering a favourable cost-per-part balance. For technical matching and application-specific cutting data, Metav Werkzeuge can provide tailored guidance and supply options. For tailored application advice and ordering of this Tungaloy TNMG160412 T6215 insert contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt assistance Technical data Article number: 6876033 SKU: 6876033-Tungaloy Manufacturer SKU: TUN6876033 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Corner radius: 1.2 mm Included angle: 60° Plate thickness: 4.76 mm Plate size: 16 mm Special features ISO designation TNMG160412 Grade T6215 (CVD-coated) Double-sided chipbreaker Triangular plate form With cylindrical hole Free clearance angle: 0° Suitable for rostfreier Stahl under stable to slightly interrupted conditions Compatible with ISO turning holders and standard clamping systems FAQ What materials is this insert designed for? The TNMG160412 T6215 insert from Tungaloy is designed primarily for rostfreier Stahl applications and performs well under stable to slightly interrupted turning conditions. How does the T6215 coating affect tool life? The CVD-coated T6215 grade on this Tungaloy TNMG160412 insert improves wear resistance and reduces built-up edge, which extends tool life and stabilises part quality. Can the insert be used on both external and internal turning operations? Yes, the ISO triangular design and the TNMG geometry make the insert suitable for both external and internal turning when used with a compatible holder. What is the corner radius and why does it matter? The corner radius is 1.2 mm; this radius enhances edge strength for heavier cuts while still allowing good surface finish where appropriate. Is the insert indexable on both sides? The double-sided design of the TNMG160412 allows indexing to a fresh cutting edge, improving cost efficiency and reducing tooling changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, precise ISO TNMG160412 geometry and a secure, double-sided design for steady, productive turning of stainless steels; order directly via Metav Werkzeuge or consult our technical advisors for application-specific selection. TNMG160412 T6215 TNMG turning insert by Tungaloy — CVD-coated carbide, 60° triangular The TNMG160412 T6215 is a CVD-coated carbide turning insert intended for external and internal turning of stainless steels under stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 ISO TNMG160412 triangular 60° form Suited for stainless steel turning Double-sided insert with central hole Improved cutting stability and consistent tool life The CVD-coated composition and wear-resistant carbide substrate are engineered to deliver stable cutting performance when machining corrosion-resistant and heat-resistant steels. The insert’s triangular 60° geometry provides a reliable cutting edge for general turning operations, while the 1.2 mm corner radius helps balance edge strength and profile accuracy. These characteristics translate into predictable tool life and reduced unplanned cycle interruptions, supporting higher process uptime and repeatable surface finish quality. Secure clamping and fast indexability for reduced downtime A centrally located cylindrical hole and the double-sided format ensure firm, repeatable clamping in compatible holders and allow two fresh cutting edges per index. The moderate plate thickness (4.76 mm) and ISO form factor mean replacement and indexing are quick and straightforward, reducing tool change time. Together, these design elements contribute to efficient shop-floor routines and faster return-to-cut after interruptions, which is especially valuable in batch production or mixed-lot environments. Practical guidance for grade and chipbreaker selection The T6215 grade is tailored as a wear-resistant option for turning stainless steels under stable to lightly interrupted conditions. For optimum results, pair this insert with a chipbreaker chosen for the specific material and machining stability: a more aggressive breaker for unstable setups, a finer breaker for finishing cuts. Consider holder rigidity, spindle power and feed rates when selecting cutting parameters; compatibility depends on form, relief angle, tolerance class, fastening method, size and plate thickness, so verify holder specifications before assembly. Material range and process benefits explained Although designed primarily for stainless steels, the insert’s robust edge and coating behaviour provide broader utility in many stainless applications requiring good wear resistance and thermal stability. The symmetry of the triangular ISO TNMG160412 format allows flexible seat orientation, improving tool inventory efficiency. Operators benefit from consistent chip control and lower rework rates when the correct breaker and stable cutting conditions are applied, resulting in measurable productivity gains and predictable part tolerances. Speak with Metav Werkzeuge’s technical team to confirm compatibility with existing holders and to specify the ideal chipbreaker and cutting parameters for this Tungaloy turning insert; contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance. Technical data Article number: 6944851 Facts Manufacturer SKU: TUN6944851 Size: 16 mm Thickness: 4.76 mm Nose radius: 1.2 mm Relief angle: 0° Insert angle: 60° Special features ISO form: TNMG160412 Grade: T6215 (CVD-coated carbide) Plate shape: triangular Hole: with cylindrical hole Double-sided insert Application: turning Material: carbide FAQ What materials is this insert suitable for? The TNMG160412 T6215 insert is specified for machining stainless steels and performs well where wear-resistant, CVD-coated carbide is required. How many usable edges does the insert offer? The double-sided TNMG format provides two cutting edges per side, allowing multiple re-indexes before replacement of the insert. Is this insert compatible with all TNMG holders? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and plate thickness; check holder specifications against the ISO TNMG160412 dimensions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T6215 Wendeplatten - Tungaloy
Choose the TNMG160412 T6215 for a durable, CVD‑coated carbide solution with stable chip control and a precise 1.2 mm nose radius; compatible with ISO turning systems for reliable performance in stainless‑steel turning. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160412 T6215 TNMG turning insert – CVD‑coated carbide, 1.2 mm nose radius (Tungaloy) TNMG160412 T6215 is an ISO indexable turning insert intended for stable and repeatable machining of stainless steels under steady to lightly interrupted cutting conditions. CVD‑coated carbide grade T6215 Triangular TNMG 16 insert, ISO 160412 1.2 mm nose radius for robust cuts Double‑sided chipbreaker, re‑indexable Consistent performance through advanced coating and grade The combination of a CVD‑coated carbide matrix and the T6215 grade delivers enhanced wear resistance and consistent edge life when machining stainless steels. The chemical vapour deposition layer improves substrate protection at elevated temperatures and reduces flank wear during prolonged turning cycles. For shops focused on reproducible component quality, the coated grade offers a favourable balance between durability and surface finish, particularly where stable clamping and cutting conditions are present. The insert belongs to the ISO turning family and is dimensioned for straightforward integration into standard indexable‑insert toolholders. Geometry that secures accuracy and process stability The triangular plate form with a 60° included angle and a 1.2 mm nose radius supports sturdy cutting action while preserving edge strength for medium‑to‑heavy feeds. The double‑sided chipbreaker provides two usable edges per indexation, effectively extending productive life before regrinding or replacement. A cylindrical hole enables positive clamping in compatible holders, and the 4.76 mm plate thickness increases resistance to chatter in less rigid set‑ups. This geometry combination enhances dimensional repeatability and surface integrity on turned parts, helping to reduce rework and downtime. System compatibility and recommended use Integration requires matching the insert form, clearance, tolerance class, fastening and size with a suitable holder or boring bar; the compatibility is defined by those parameters rather than the insert alone. The product is designed primarily for turning (external and internal) of stainless steels under stable to lightly interrupted conditions; select the chipbreaker and grade according to workpiece alloy, section rigidity and machining strategy. Indexing is simple: rotate to the next cutting edge to restore geometry. For multi‑operation workflows, maintaining consistent holder setup and coolant strategy preserves the coating benefits and maximises the insert’s service life. Contact Metav Werkzeuge for tailored technical advice and to secure TNMG160412 T6215 inserts from Tungaloy — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6944884 Manufacturer SKU: TUN6944884 SKU: 6944884-Tungaloy Product designation: TNMG160412 T6215 Tungaloy insert Facts Insert size: 16 mm Plate thickness: 4.76 mm Nose radius: 1.2 mm Included angle: 60° Clearance angle: 0° Hole: with cylindrical hole Special features CVD‑coated carbide (T6215) For turning of stainless steels Triangular indexable insert (TNMG) Double‑sided chipbreaker, re‑indexable ISO‑standard turning insert series Cylindrical hole for secure clamping Suitable for external and internal turning FAQ Which materials are best machined with this insert? The TNMG160412 T6215 insert from Tungaloy is formulated for machining stainless steels, offering enhanced wear resistance under stable cutting conditions. How many cutting edges are available per insert? Thanks to its double‑sided chipbreaker design, the insert provides multiple indexable cutting edges to extend productive life before replacement. What profile and holder compatibility are required? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; use a matching TNMG‑capable holder or boring bar for correct clamping and performance. Can the insert handle interrupted cuts? The T6215 grade is intended for stable to lightly interrupted conditions; it performs best where cutting forces remain relatively consistent and clamping is rigid. What are the main benefits of the CVD coating? The CVD coating on the TNMG160412 reduces flank wear at elevated temperatures and helps maintain cutting edge integrity, improving tool life and part consistency. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160412 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a wear-resistant CVD-coated carbide grade, a 60° ISO triangular geometry and a double-sided chipbreaker to secure consistent turning performance and reduced tool changes; order the insert directly via Metav Werkzeuge or request advice from our consultants. TNMG 160412 T6215 – Tungaloy turning insert for stainless steel machining The TNMG160412 T6215 is an ISO-standard triangular indexable insert for external and internal turning, designed for stable to lightly interrupted stainless steel applications. CVD-coated carbide grade T6215 ISO triangular insert, 60° geometry Double-sided insert with cylindrical hole Optimised for stainless steel turning Improve machining stability and extend cutting life The combination of a CVD-coated surface and a hard carbide substrate provides elevated wear resistance and thermal stability, resulting in extended tool life under repetitive turning cycles. The T6215 grade is formulated for machining stainless steel where work-hardening and heat generation demand reliable wear control. The double-sided chipbreaker improves chip formation and evacuation, which reduces the risk of built-up edge and contributes to steady cutting forces and fewer unplanned tool changes. Reliable fit, simple indexing and secure clamping Designed to the ISO specification, the insert offers predictable seating and repeatable geometry when paired with a matching external holder or boring bar. The cylindrical hole aids accurate locating and clamping, while the insert dimensions — 16 mm size and 4.76 mm thickness — ensure compatibility with standard ISO triangular pockets. The neutral 0° relief angle and the defined tolerance class mean straightforward indexing and minimal set-up time, supporting faster tool changes and consistent part quality. Achieve consistent surface finish in stainless steel turning The 60° triangle geometry and a 1.2 mm corner radius deliver a balance between strength and edge radii for improved surface quality on shafts and bores. The engineered chip control fosters uniform chips, which reduces scratching and rework on the workpiece. For turning operations where process stability matters, the correct pairing of chipbreaker and grade produces reliable chip control and predictable surface results, even when cutting parameters vary slightly. Economical productivity with predictable results Using a wear-resistant insert like the one from Tungaloy helps lower overall machining costs through extended edge life and fewer changeovers. The indexable format and standardised form reduce inventory complexity, while the T6215 coating concept supports high process reliability in demanding stainless steel environments. The result is improved uptime and more consistent cycle times — attributes that translate directly into higher productivity on the shop floor. Get expert guidance from Metav Werkzeuge on selecting and setting up the Tungaloy T6215 CVD-coated turning insert to optimise machining performance; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944860 SKU: 6944860-Tungaloy Manufacturer item number: TUN6944860 Model series: ISO-Drehwendeschneidplatten Core data Insert designation: TNMG160412 Grade/sort: T6215 Corner radius: 1.2 mm Geometry angle: 60° Relief angle: 0° Size: 16 mm Thickness: 4.76 mm Special features Material: carbide Coating: CVD Chipbreaker: double-sided Hole: with cylindrical hole Plate form: triangular Application: turning Typical use: stable to lightly interrupted stainless steel machining System components: ISO insert, compatible external holder or boring bar, clamping set and replacement screws FAQ Which materials is this insert intended for? The TNMG160412 T6215 insert from Tungaloy is optimised for machining stainless steel under stable to lightly interrupted conditions and can be selected where good wear resistance is required. Is the insert indexable and reversible? Yes, the insert is double-sided and indexable; both cutting edges can be rotated into position to extend usable life before replacement. How is compatibility with toolholders ensured? Compatibility is governed by the ISO form, the relief angle (0°), tolerance class, fastening method, size and thickness; the TNMG160412 designation confirms conformance to ISO triangular insert standards. What benefits does the CVD coating provide? The CVD coating on the T6215 grade increases surface hardness and thermal resilience, improving wear resistance and supporting consistent chip formation during stainless steel turning. Is this insert suitable for heavily interrupted cuts? The TNMG160412 T6215 is designed for stable to lightly interrupted applications; heavily interrupted cutting may require a geometry and grade specifically designed for shock resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T6215, a 1.2 mm corner radius and ISO-compliant geometry for reliable stainless steel turning under stable to lightly interrupted conditions; order the TNMG160412 T6215 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160412 T6215 – ISO triangular turning insert for stainless steel, Tungaloy The TNMG160412 T6215 is an ISO-format triangular turning insert engineered for productive external and internal turning of stainless steels in stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 Optimised for stainless steel turning Triangle ISO form with 60° cutting angle 1.2 mm corner radius for robust cutting edges Double-sided chipbreaker, cylindrical hole Consistent cutting performance for stainless steel The insert’s CVD-coated carbide construction provides a balanced combination of wear resistance and toughness, making it suitable for rostfreier Stahl / stainless steel machining where built-up edge and thermal softening are concerns. The applied coating reduces flank wear and helps maintain a stable cutting edge over extended cycles, which translates to fewer indexings and improved process economy. As a result, parts tolerances remain consistent and tool-change frequency is minimised, supporting continuous production runs. Secure clamping and stable tool engagement With an ISO triangular form and a 60° cutting angle, the geometry offers repeatable seating in compatible holders; the cylindrical hole and 4.76 mm plate thickness contribute to reliable clamping and reduced vibration. The 1.2 mm corner radius gives a sturdy edge for moderate depths of cut while the double-sided arrangement delivers multiple effective cutting edges per insert, improving usable life and lowering tooling costs per component. Practical advantages of the T6215 grade and chip control The T6215 grade was selected for its balance between wear resistance and edge stability in stainless steel applications. The double-sided chipbreaker supports predictable chip formation and evacuation during turning, reducing the risk of chip entanglement and surface damage. For production settings where reproducible surface finish and process stability matter most, this combination helps to sustain cycle times and contributes to consistent part quality. Application guidance and system compatibility Designed as part of an ISO turning insert system, the insert is intended to be used with matching external holders or boring bars; compatibility is determined by insert shape, clearance angle, tolerance class, mounting method, size and thickness. Typical uses include external and internal turning; selecting the appropriate chipbreaker and grade according to workpiece material and machining stability will ensure optimal results. For less experienced teams, specifying the holder geometry and clamping accessories together simplifies setup and reduces trial-and-error. For process reliability with the Tungaloy T6215 grade and ISO TNMG geometry, contact Metav Werkzeuge for availability and tailored advice; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6877438 Manufacturer SKU: TUN6877438 Label: TNMG160412 T6215 Tungaloy-Wendeplatte Numbers / Core technical data Plate size: 16 mm Plate thickness: 4.76 mm Cutting angle: 60° Corner radius: 1.2 mm Designs / Special features Material: carbide Coating: T6215 (CVD-coated) Geometry: triangular, ISO format Hole: cylindrical Chipbreaker: double-sided Application: turning FAQ What materials is this insert suited for? The TNMG160412 T6215 insert is formulated primarily for stainless steel turning; the T6215 grade supports wear resistance and edge stability in that material group. How many cutting edges are available per insert? As a double-sided triangular insert, the TNMG160412 offers multiple indexable cutting edges, which improves overall edge economy and reduces tooling costs per part. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, mounting method, size and thickness; use ISO-compatible holders designed for 60° triangular inserts for reliable clamping of the TNMG160412. Can the TNMG160412 T6215 handle interrupted cuts? The T6215 grade is intended for stable to lightly interrupted cutting conditions; for heavy interruptions, a different grade or edge preparation may be recommended. What benefits does the CVD coating provide? The CVD-coated carbide offers enhanced wear resistance and thermal stability during stainless steel turning, helping to reduce flank wear and maintain surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a wear-resistant T6215 CVD-coated carbide grade and a double-sided chipbreaker for steady, productive turning of stainless steels; the 60° triangular geometry with a 1.2 mm corner radius ensures robust edge life and predictable indexing. Order the TNMG160412 T6215 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160412 T6215 — Tungaloy turning insert for stainless steel turning The TNMG160412 T6215 is a 60° triangular indexable insert designed for turning applications, optimised for rostfreiem stainless steels under stable to lightly interrupted cutting conditions. CVD-coated carbide T6215 grade Optimised for stainless steel turning Double-sided chipbreaker design 1.2 mm corner radius, 60° triangular Consistent edge life for demanding turning tasks The solid base of this insert is carbide with a CVD-coated surface in grade T6215, developed for wear resistance when machining stainless steels. The coating reduces abrasive wear and improves thermal stability, which translates into longer in‑service intervals and fewer indexings. As a result, cycle times remain consistent and tool-change frequency is reduced, supporting steady shop-floor throughput and measurable cost efficiency. ISO compatibility and secure clamping for predictable fit Produced to the ISO-standard TNMG geometry, the insert’s compatibility with a holder is determined by form, relief angle, tolerance class, fastening method, size and thickness. The insert has a 0° relief angle, a cylindrical hole and nominal plate dimensions of 16 mm with a thickness of 4.76 mm, fitting conventional external holders when the correct clamping set and screw are used. This standardisation simplifies inventory management and ensures straightforward replacement in established turning systems. Process stability and economical performance The double-sided chipbreaker provides consistent chip control on both indexable faces, improving surface finish and reducing the risk of built-up edge when cutting stainless steels. The 1.2 mm corner radius contributes to edge strength, enabling more robust machining passes without sacrificing dimensional control. Together, these characteristics reduce unexpected downtime and contribute to a favourable cost-per-part calculation, particularly in medium-volume production runs. Practical selection and integration guidance Selection of chipbreaker and grade should match the workpiece material, machining strategy and machine rigidity; the supplied T6215 grade is tailored to rostfreiem stainless steels under stable to slightly interrupted conditions. The insert forms part of a system: indexable insert, appropriate external holder or boring bar, underlay/clamping set and replacement screws. Correct matching of geometry and clamping delivers repeatable results and allows operators to exploit the insert’s full potential without complex setup changes. Contact Metav Werkzeuge for tailored recommendations on Tungaloy turning inserts and to secure the appropriate TNMG160412 T6215 for your production; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6944897 Manufacturer SKU: TUN6944897 SKU: 6944897-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Core data Geometry: TNMG160412 Corner radius: 1.2 mm Included angle: 60° Relief angle: 0° Thickness: 4.76 mm Plate size: 16 mm Materials & features Grade/coating: T6215 (CVD-coated carbide) Chipbreaker: double-sided Hole: with cylindrical hole Plate form: triangular Typical application: turning stainless steels System components: insert, holder/boring bar, underlay/clamping set, spare screws FAQ Which materials is this insert best suited for? The TNMG160412 T6215 insert is optimised for stainless steels; the T6215 CVD-coated carbide grade provides improved wear resistance and edge stability for these alloys. Is the insert compatible with standard ISO holders? Yes; the TNMG160412 follows ISO geometry standards, but compatibility depends on matching form, relief angle, tolerance class, fastening, size and thickness with the chosen holder. What effect does the 1.2 mm corner radius have on machining? A 1.2 mm radius increases edge strength and vibration tolerance, making it suitable for more stable turning operations where a balance of finish and robustness is required. How is the insert mounted in the holder? The insert uses a cylindrical hole and is secured with the appropriate screw and clamping set; a correct underlay and tolerance‑matched holder ensure secure seating and repeatable positioning. What advantages does the T6215 coating provide? The T6215 CVD-coated carbide offers enhanced wear resistance and thermal stability when machining stainless steels, contributing to prolonged tool life and consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T6215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated, wear-resistant grade combined with ISO compatibility for reliable, cost-effective turning of stainless steel; order directly via Metav Werkzeuge or consult our specialists for integration advice. TNMG160412 T6215 Tungaloy turning insert — CVD-coated carbide, 60° triangular A TNMG160412 T6215 indexable turning insert designed for ISO-compliant external and internal turning, suited to stable or slightly interrupted cutting of stainless steel. CVD-coated wear-resistant grade T6215 ISO TNMG 160412 triangular form 60° cutting angle, 0° clearance angle Double-sided chipbreaker, with cylindrical hole Efficient wear resistance for consistent production The insert delivers durable performance thanks to the CVD coating and the T6215 grade, which provide improved wear resistance during extended cycles. This characteristic reduces the frequency of regrinding or replacement, lowering total tooling cost and contributing to a smoother production flow. Because the insert is manufactured to ISO dimensions, it ensures interchangeability with standard holders when form, clearance angle, tolerance class, fastening and thickness are matched, simplifying logistics and stock management. Geometry that balances strength and surface quality Engineered geometry combines a 60° triangle with a 1.2 mm radius and a 0° clearance angle, offering a robust cutting edge for medium feeds while keeping cutting forces manageable. The 4.76 mm thickness increases rigidity in overhung setups, helping to limit chatter and secure repeatable surface finishes. The double-sided chipbreaker supports controlled chip formation for turning operations, making the insert suitable for both stable and lightly interrupted cuts and enhancing process stability. Practical integration and material guidance Optimised for turning, the insert is a pragmatic choice for applications on stainless steel where tool life, reproducibility and surface quality matter. Compatibility with a matching external holder or boring bar, plus appropriate shim/clamping sets and replacement screws, completes the system for reliable operation. For uncertain applications or to select the best chipbreaker and holder pairings, technical consultation is available to align cutting data, machine rigidity and workpiece material with the insert’s capabilities. For tailored application advice or to order the TNMG160412 T6215 from Metav Werkzeuge, please contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930; specialists are available to support integration into existing turning processes. Technical data Article number: 6903047 SKU: 6903047-Tungaloy Manufacturer SKU: TUN6903047 Model series: ISO turning indexable inserts Material: carbide Core technical data Insert designation: TNMG160412 Size: 16 mm Corner radius: 1.2 mm Thickness: 4.76 mm Cutting angle: 60° Clearance angle: 0° Hole: with cylindrical hole Special features Grade/coating: T6215, CVD-coated carbide Chipbreaker: double-sided Shape: triangular insert Application: turning (external and internal) Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert suitable for? The TNMG160412 T6215 insert is specified for turning stainless steel, with the T6215 grade optimised for wear resistance under stable to lightly interrupted conditions. What are the key geometric values of the insert? The insert is a TNMG160412 type with a 16 mm size, 1.2 mm radius, 4.76 mm thickness, and a 60° triangular form; clearance angle is 0°. Is the insert compatible with standard holders? Being ISO-compliant, the TNMG160412 T6215 is compatible with holders that match form, clearance angle, tolerance class, fastening, size and thickness; proper holder selection ensures secure clamping and repeatable results. What does the T6215 marking mean for performance? T6215 denotes a CVD-coated carbide grade designed for improved wear resistance on stainless steel, offering longer tool life and stable cutting behaviour in production. How does the double-sided chipbreaker affect productivity? The double-sided chipbreaker provides consistent chip control and allows indexable use of both sides, enhancing uptime and cost-efficiency in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T6215 Wendeplatten - Tungaloy
Take advantage of wear-resistant CVD-coated carbide combined with precise ISO geometry and an efficient double-sided chipbreaker for dependable stainless steel turning; order directly via Metav Werkzeuge or request advice from our consultants. TNMG160412 T6215 triangular indexable insert for turning by Tungaloy — CVD-coated cemented carbide, 60° geometry A TNMG160412 insert designed for ISO-compatible external and internal turning, optimised for machining stainless steels under stable to slightly interrupted cutting conditions CVD-coated carbide grade T6215 Optimised for turning stainless steels 60° triangle form with 1.2 mm radius Double-sided chipbreaker with cylindrical hole Consistent wear resistance for stainless steel applications The combination of a CVD-coated surface layer on a high-quality cemented carbide substrate provides improved resistance to abrasive and adhesive wear often encountered when machining stainless steels. This results in extended edge life and more predictable tool-change intervals, which in turn contributes to lower overall machining costs. The coating supports stable thermal behaviour at typical turning speeds, helping to maintain a consistent surface finish over longer production runs. ISO geometry and secure seating reduce setup time Configured to ISO standards, the triangular form with a 60° cutting angle and zero clearance wedge offers repeatable seating in standard external holders. Compatibility with the holder is determined by form, clearance angle, tolerance class, fixation method, size and thickness; correct matching ensures reliable clamp engagement and repeatable geometry. This standardisation simplifies tool management across multiple machines and reduces the risk of incorrect insert selection during changeovers. Improved chip control and adaptability in mixed production The double-sided chipbreaker design supports controlled chip formation across a range of stainless-steel alloys and cutting parameters. The insert’s cylindrical hole allows secure fastening and straightforward rotation or indexing, enabling two usable cutting edges per side and effective use of the insert’s life. As part of a system comprising a matching outside holder or boring bar, the arrangement enables fast replacement and minimises machine downtime while preserving process stability. Choosing the right grade and handling recommendations The T6215 grade is a wear-resistant, CVD-coated option intended specifically for turning rostfreier Stähle under stable to lightly interrupted conditions; it favours good edge life and surface integrity. Select a chipbreaker and insert size that suit the component material, depth of cut and machine rigidity. The 1.2 mm corner radius offers a balance between strength and finishing capability; larger radii improve edge robustness, while smaller radii help achieve finer detail. For inventory planning, consider spare screws and clamping sets as part of the insert system to maintain continuous production. Discuss application details with Metav Werkzeuge to specify the optimal Tungaloy turning insert for individual jobs or to request technical recommendations; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6944864 Manufacturer SKU: TUN6944864 SKU: 6944864-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Cutting angle: 60° Clearance angle: 0° Special features Material: cemented carbide Coating: CVD-coated Grade: T6215 Shape: triangular Hole: cylindrical hole Chipbreaker: double-sided Application: turning (external and internal) ISO designation: 160412 FAQ What materials is this insert intended for? The TNMG160412 T6215 insert from Tungaloy is intended primarily for machining stainless steels under stable to slightly interrupted conditions. How does the T6215 grade affect tool life? Tungaloy’s T6215 grade delivers wear resistance through a CVD coating and carbide substrate, which typically results in longer tool life and consistent performance in turning operations. Can the insert be used on standard ISO holders? Yes, the TNMG160412 follows ISO geometry and will be compatible with holders that match its form, size and clamping specifications. What are the key dimensions to check when selecting this insert? Confirm the size (16 mm), thickness (4.76 mm), corner radius (1.2 mm) and the 60° triangle form to ensure correct fit and desired cutting characteristics. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T6215 Wendeplatten - Tungaloy
Combining CVD-coated carbide durability with a precise 60° geometry and a 1.2 mm corner radius, this indexable insert is tailored for stable to lightly interrupted stainless steel turning and offers predictable tool life and surface quality. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. TNMG 160412 T6215 triangular turning insert by Tungaloy — CVD-coated carbide for stainless steel turning TNMG160412 T6215 is a triangular ISO turning insert designed for external and internal turning of stainless steels under stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 Optimised for stainless steel turning Double-sided chipbreaker, robust cutting 16 mm triangular insert, 1.2 mm radius Durable cutting performance for demanding stainless steel applications The CVD-coated carbide construction provides high wear resistance and thermal stability, which extends service intervals and maintains cutting-edge integrity in continuous operation. The T6215 grade is formulated for machining stainless steel, offering a balance between hardness and toughness that reduces flank wear and minimises edge chipping. Thanks to the combination of coating and substrate, the insert supports consistent dimensional accuracy and improved component surface quality, helping to maintain production throughput without frequent insert changes. Simple integration with ISO tooling for predictable setups As an ISO-standard indexable component, the triangular insert fits a broad range of external holders and boring bars when matched by form, relief angle, tolerance class, fastening method, size and thickness. The insert features a 16 mm inscribed circle, 4.76 mm plate thickness and a 1.2 mm corner radius, with a cylindrical hole for secure fastening. The 60° geometry and 0° clearance contribute to stable seating and repeatable cutting conditions, reducing setup time and easing inventory management across toolrooms that follow ISO standards. Enhanced chip control and cost-effective productivity Equipped with a double-sided chipbreaker, the insert offers controlled chip formation for a wide variety of feed and depth settings, supporting safer swarf evacuation and consistent surface finishes. Being double-sided increases the number of available cutting edges per insert, which lowers per-edge cost and improves overall process economics. The design supports efficient material removal while maintaining edge stability, making the insert a reliable choice for manufacturers seeking steady productivity gains and repeatable results on corrosion-resistant alloys. Contact Metav Werkzeuge for tailored application advice and to request the TNMG160412 T6215 insert from Tungaloy; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6944834 Manufacturer SKU: TUN6944834 SKU: 6944834-Tungaloy Manufacturer article number: 6944834 Facts Model series: ISO-Drehwendeschneidplatten ISO designation: 160412 Inscribed circle: 16 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Geometry angle: 60° Hole: with hole Hole style: cylindrical hole Special features Material: carbide Coating / grade: CVD-coated carbide, T6215 Insert form: triangular Chipbreaker: double-sided Typical application: external and internal turning of stainless steel FAQ What materials is this insert suited for? The TNMG160412 T6215 insert is optimised for machining stainless steel grades under stable to slightly interrupted cutting conditions, using its CVD-coated carbide substrate for enhanced wear resistance. How does the double-sided chipbreaker benefit production? The double-sided chipbreaker offers controlled chip formation and additional usable cutting edges, which improves chip control and reduces the cost per active edge for longer production runs. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the insert fits standard ISO triangular holders and boring bars designed for a 16 mm inscribed circle. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T6215 Wendeplatten - Tungaloy
The TNMG160412 T6215 offers a robust, CVD‑coated carbide grade optimised for turning rostfreien Stahl, combining wear resistance with reliable chip control. Its 60° triangular geometry and 1.2 mm corner radius provide consistent surface quality and long tool life in stable to lightly interrupted cuts. Order the TNMG160412 T6215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160412 T6215 TNMG turning insert for Turning by Tungaloy — CVD‑coated carbide, 1.2 mm corner radius The TNMG160412 T6215 is an ISO‑standard triangular turning insert intended for external and internal turning; it is designed to perform under stable to lightly interrupted conditions and to deliver consistent finishes on rostfreien Stahl. CVD‑coated carbide grade T6215 Optimised for rostfreien Stahl turning 60° triangular geometry, 1.2 mm radius Double‑sided chipbreaker, with cylindrical hole Improve process stability with wear‑resistant coating The CVD‑coated carbide formulation in grade T6215 combines a hard, wear‑resistant surface with a tough substrate to resist abrasive and adhesive wear during turning. This coating improves tool life and maintains cutting edge integrity over longer cycles, which reduces machine downtime and frequency of insert changes. For operations on rostfreien Stahl, the coating helps control built‑up edge and retains edge geometry, supporting predictable machining outcomes and higher productivity. Reliable geometry for consistent surface quality The 60° triangular geometry and 1.2 mm corner radius offer a balance between strength and versatility: the apex supports robust engagement in interrupted cuts, while the radius aids in achieving a steady surface finish. The double‑sided chipbreaker is engineered to produce short, controllable chips in a range of cutting conditions, simplifying chip evacuation and lowering the risk of surface damage. Combined with the insert’s central cylindrical hole, the system ensures secure clamping and repeatable positioning in ISO‑compliant holders. Versatile use for external and internal turning Designed for both external and internal turning tasks, the insert supports a variety of machining strategies when matched with an appropriate holder and clamping set. The stable cutting performance on rostfreien Stahl leads to fewer interruptions for tool changes and rework, improving throughput. When the insert is paired with a correctly specified holder, operators benefit from improved cycle times and consistent dimensional accuracy, which is particularly valuable in serial production and finish operations. ISO compatibility and straightforward inventory management As an ISO‑designated turning insert, compatibility with holders is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The TNMG160412 format simplifies procurement and inventory control across tooling systems that adhere to ISO norms. For ordering and traceability, the insert is available under the manufacturer item number and SKU listed below, ensuring clear identification for replenishment and toolroom documentation. For application advice or to confirm holder compatibility for the Tungaloy TNMG160412 T6215 insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss machining parameters and optimisation options Technical data Article number: 6944880 Manufacturer SKU: TUN6944880 SKU: 6944880-Tungaloy Designation: TNMG160412 T6215 Tungaloy‑Wendeplatte Core specifications Corner radius: 1.2 mm Included angle: 60° Plate thickness: 4.76 mm Inscribed circle / size: 16 mm Plate shape: triangular Special features CVD‑coated carbide Grade T6215 for wear resistance Double‑sided chipbreaker With cylindrical hole for secure clamping Intended application: Turning (external and internal) ISO‑standard insert format FAQ Which materials is this insert suitable for? The TNMG160412 T6215 is specified for machining rostfreien Stahl and performs best in stable to lightly interrupted turning operations on these materials. What does the T6215 designation mean for performance? Grade T6215 denotes a CVD‑coated carbide composition optimised for wear resistance during turning of rostfreien Stahl, offering a balance between edge life and surface finish. Is the insert reversible or single‑edged? This triangular insert is double‑sided, providing multiple indexable cutting edges and economical use of the insert geometry for extended service life. How does the chipbreaker affect machining? The double‑sided chipbreaker produces short, controlled chips under a range of cutting conditions, supporting safer chip evacuation and improved surface quality in turning operations. How to ensure holder compatibility for the ISO insert? Compatibility depends on insert form, clearance angle, tolerance class, fixation, size and thickness; referencing the TNMG160412 ISO designation and the manufacturer SKU ensures correct selection of a matching holder. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160412 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, ISO-standard compatibility and a compact triangular geometry for reliable stainless-steel turning operations; order the insert directly via Metav Werkzeuge or consult the specialists for tool system selection. TNMG 160412 T6215 — TNMG160412 T6215 Tungaloy turning insert (CVD-coated carbide, 60° triangle) TNMG160412 T6215 is a triangular, ISO-standard indexable insert designed for external and internal turning of stainless steels under stable to lightly interrupted cutting conditions CVD-coated carbide grade T6215 ISO TNMG triangular 60° insert Double-sided with cylindrical hole Optimised for stainless steel turning Reliable wear resistance for consistent production The CVD-coated carbide grade T6215 delivers high wear resistance during continuous and lightly interrupted turning of stainless steels, extending in-process life and reducing frequent index changes. The coating creates a hard, thermally stable layer that limits flank wear and built-up edge formation; this makes the insert particularly suited for applications where predictable tool life is essential. The ISO construction also supports a standardised toolholding approach that improves machine uptime and process reproducibility. Precision geometry for predictable surface quality A 60° triangular shape with a 1.2 mm corner radius and a 0° relief angle produces a stable cutting edge geometry that balances strength and finish. The double-sided chipbreaker promotes controlled chip formation, improving evacuation and reducing chatter risk on long overhangs. The cylindrical centre hole enables secure clamping in compatible external holders or boring bars; compatibility depends on form, clearance angle, tolerance class, clamp type, size and thickness. This geometry yields consistent surface finish and dimensional repeatability in turning operations. System-level efficiency that lowers cost per component The insert’s indexable design enables multiple edges per insert, lowering tooling cost per component and speeding changeovers. The carbide substrate and CVD protection support sustained cutting at production feeds and speeds, while the ISO standardisation simplifies stocking and tool selection across machine parks. Choosing the appropriate chipbreaker and grade for the workpiece and stability reduces scrap and cycle time, translating into measurable process economy and more predictable batch throughput. Contact Metav Werkzeuge for application advice or to order the TNMG160412 T6215 Tungaloy insert for turning tasks; the Metav Werkzeuge team can recommend holders and clamping components to match the ISO insert system Technical data Article number: 6876076 Manufacturer SKU: TUN6876076 SKU: 6876076-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide (Hartmetall) Grade / coating: T6215 (CVD-coated) Facts Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Insert angle: 60° Relief (clearance) angle: 0° Hole: with hole (cylindrical) Special features ISO-standard TNMG160412 geometry Double-sided chipbreaker Suitable for turning rostfreie Stähle (stainless steels) CVD-coated carbide substrate for wear resistance Triangular plate for multiple indexing positions Compatible with external holders and boring bars FAQ What holder types are compatible with this triangular ISO insert? Compatibility depends on holder form, relief angle, tolerance class, clamp type, size and thickness; the TNMG160412 T6215 insert is intended for standard external holders or boring bars designed for TNMG inserts and uses the cylindrical centre hole for secure clamping. How does the chipbreaker affect machining stainless steel? The double-sided chipbreaker on this grade controls chip shape and evacuation, reducing the risk of built-up edge and improving surface finish when turning stainless steels with the TNMG160412 Tungaloy insert. Can this insert be used for interrupted cuts? Yes, the CVD-coated carbide and robust triangular geometry provide stability for stable to lightly interrupted cutting conditions typical in many stainless-steel turning operations. How many cutting edges are available per insert and how does that impact cost? The triangular, double-sided design offers multiple index positions, which lowers cost per cutting edge and reduces downtime for insert changes, contributing to improved process economy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, ISO‑standard TNMG geometry and compatibility with common holders for consistent turning productivity — order the insert via Metav Werkzeuge or consult their specialists for application advice. TNMG160412 T6215 – Indexable turning insert for turning by Tungaloy TNMG160412 T6215 is an ISO‑standard triangular indexable insert designed for external and internal turning, offering a wear‑resistant grade optimised for rostfreier Stahl under stable to slightly interrupted cutting conditions CVD-coated carbide for high wear resistance Double-sided chipbreaker for flexible indexing ISO TNMG form for broad holder compatibility 1.2 mm corner radius for robust finishing High‑performance grade for longer tool life The combination of a CVD coating and carbide substrate in this grade delivers measurable improvements in tool life and process stability. The CVD layer acts as a hard, wear‑resistant barrier that reduces flank wear and built‑up edge formation, which in turn supports consistent results across batches. For production environments seeking fewer insert changes and reduced downtime, the optimised grade T6215 provides a reliable balance between productivity and predictable tool life. Geometry engineered for stable, accurate turning The insert’s ISO TNMG form and triangular outline enable secure clamping and straightforward indexing in standard toolholders. Key geometric details — 1.2 mm corner radius, 0° clearance, 4.76 mm plate thickness and a cylindrical locating hole — work together to provide rigid support at the cutting zone. The double‑sided chipbreaker design allows use of multiple cutting edges before replacement, while the triangular shape maximises edge availability. These characteristics contribute to improved surface finish and repeatable dimensional accuracy when the system is correctly assembled. Practical application and process recommendations Designed primarily for turning, the grade is especially suited to machining rostfreier Stahl under stable to lightly interrupted conditions. Selection of an appropriate chipbreaker and feed‑speed pairing is critical: choose a chipbreaker and cutting data that match material condition and machine stability to avoid edge overload. System setup normally comprises the ISO insert, a compatible external holder or boring bar, a support shim/clamping set and spare screws — ensuring rapid replacement and minimal fixture adjustment during production changeovers. For reliable rostfreier Stahl turning with Tungaloy quality, contact Metav Werkzeuge to request the TNMG160412 T6215 insert (SKU 6876164-Tungaloy) or discuss the optimal chipbreaker and holder combination with a technical consultant. Technical Data Article number: 6876164 SKU: 6876164-Tungaloy Manufacturer SKU: TUN6876164 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten WPL designation: TNMG160412 T6215 Tungaloy‑Wendeplatte Facts Corner radius: 1.2 mm Angle: 60° Plate thickness: 4.76 mm Plate size: 16 mm Special features Material: carbide Coating: CVD Grade: T6215 Application: Turning Hole: with cylinder hole Clearance: 0° Chipbreaker: double‑sided Plate form: triangular System: ISO insert, holder, shim/clamping set and spare screws Compatibility determined by form, clearance, tolerance class, fixing, size and thickness FAQ What holder types are compatible with this insert? Compatibility depends on the holder matching the ISO TNMG form, the plate size and thickness; the TNMG160412 insert fits holders and boring bars designed for ISO TNMG‑160412 geometry. Which materials is this grade intended for? The T6215 grade is specified for machining rostfreier Stahl under stable to slightly interrupted conditions, providing improved wear resistance compared with uncoated grades. What are the benefits of the CVD coating on this insert? The CVD coating on the T6215 insert increases surface hardness and thermal stability, which reduces flank wear and helps maintain cutting edge integrity over longer runs. How does the double‑sided chipbreaker affect tool life? The double‑sided chipbreaker allows multiple indexings of the insert before disposal, offering better edge economy and reduced tool change frequency. What is included in a typical system setup for this insert? A typical system comprises the ISO insert itself, a compatible external holder or boring bar, a shim or clamping set and replacement screws for rapid, repeatable assembly. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160412 T9205 Wendeplatten - Tungaloy
Benefit from the CVD-coated T9205 grade and a robust 1.2 mm corner radius for stable, high-speed steel turning; the ISO TNMG form ensures broad holder compatibility and efficient chip control. Order original inserts through Metav Werkzeuge or consult our specialists for process-matched selection and cutting-parameter recommendations. TNMG 160412 T9205 turning insert by Tungaloy — ISO TNMG triangle, CVD-coated carbide TNMG 160412 T9205 is an ISO-format indexable insert designed for productive turning of steel under stable conditions and elevated cutting speeds CVD-coated carbide grade T9205 for wear resistance Double-sided chipbreaker for reliable chip control ISO TNMG form, compatible with standard holders 60° triangular shape with cylindrical hole Productive turning performance for demanding steel applications The insert combines a CVD-coated carbide substrate with the T9205 grade to deliver high wear resistance and consistent edge life during medium to high cutting-speed turning. The geometry and double-sided chipbreaker are optimised for uninterrupted chip evacuation, which reduces the risk of built-up edge and improves surface finish. For workshop planners and production engineers, this means more reliable cycle times and fewer insert changes under steady clamping conditions. Precise geometry that supports toolholder compatibility and stability The triangular ISO shape with a 60° included angle and a corner radius of 1.2 mm provides a balance between edge strength and dimensional control. The insert is 0° clearance (relief) and features a cylindrical hole for secure fastening in conventional TNMG-capable holders. These measurable specifications aid in straightforward tool setup and repeatable positioning, so existing tool assemblies can be utilised without redesign, maintaining process stability on lathes and turning centres. Practical benefits and application guidance for process optimisation Selecting the TNMG 160412 T9205 for turning applications yields tangible production advantages: improved tool life under stable cutting conditions and predictable performance at higher speeds. The carbide construction and CVD coating reduce flank and crater wear, which supports longer intervals between inspections and lowers tooling-related downtime. For mixed-production environments where steels of varying alloy content are machined, this insert offers a robust baseline performance that simplifies inventory and tooling decisions. Contact Metav Werkzeuge for tailored application advice and to order original Tungaloy TNMG 160412 T9205 turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for rapid support and delivery options Technical Data Article number: 6785712 Manufacturer SKU: TUN6785712 Model series: ISO turning inserts Material: Carbide Coating/grade: T9205 (CVD-coated) Brand: Tungaloy Facts Shape: triangular, 60° included angle Size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief/clearance angle: 0° Hole: with cylindrical hole Special features Double-sided chipbreaker ISO designation: TNMG 160412 Typical application: turning of steel Compatible with ISO TNMG holders Wear-resistant grade for higher cutting speeds FAQ What materials is this insert designed for? The TNMG 160412 T9205 insert is specified for the productive turning of steel using its CVD-coated carbide grade T9205 to resist wear under higher cutting speeds. How does the chipbreaker design affect machining? The double-sided chipbreaker on the TNMG 160412 promotes consistent chip control, reducing interruptions and contributing to improved surface finish and process reliability during turning operations. Is the insert compatible with standard TNMG holders? Yes, the ISO TNMG geometry, cylindrical hole and standard thickness make the Tungaloy TNMG 160412 compatible with conventional TNMG-capable toolholders for straightforward clamping and repeatable positioning. What are the key geometry values to consider when setting up the tool? Important values include the 60° triangular form, corner radius 1.2 mm, thickness 4.76 mm and 0° relief angle, which together determine clearance, edge strength and engagement with the workpiece. Can this insert be used for high-speed finishing cuts? The T9205 grade is optimised for productive turning at elevated cutting speeds under stable conditions; it performs well in many finishing and semi-finishing operations on steel when cutting parameters are matched accordingly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T9205 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade engineered for wear resistance, an ISO-standard TNMG160412 geometry for broad holder compatibility and a 60° cutting angle that supports productive turning at higher cutting speeds — order the insert directly via Metav Werkzeuge or ask our consultants for application advice. TNMG 160412 T9205 TNMG160412 T9205 — Tungaloy indexable insert for turning The TNMG160412 T9205 is an ISO-standard triangular indexable insert designed for productive external and internal turning with a 60° cutting angle and a double-sided chipbreaker. TNMG 160412 form for ISO compatibility CVD-coated carbide T9205 for wear resistance 60° triangular geometry for versatile turning Cylindrical hole, double-sided chipbreaker High productivity from a wear-resistant CVD coating The insert’s CVD-coated carbide grade T9205 delivers consistent edge life under stable cutting conditions, enabling machining at elevated spindle speeds without sacrificing surface finish. By converting the coating and substrate properties into measurable benefits, manufacturers achieve fewer tool changes and longer uninterrupted production runs. The coating’s thin, uniform layers reduce abrasive wear, while the carbide substrate maintains edge stability; together they enable productive turning of Stahl components with reliable repeatability. ISO conformity for quick toolholder compatibility Designed to the ISO TNMG160412 form, the geometry and mounting features ensure straightforward compatibility with a wide range of external holders and boring bars. The combination of standardised form, defined clearance angle and precise tolerances simplifies tool selection and stock management in mixed fleets. For workshops seeking process reliability, this ISO-standard insert reduces setup time and minimises the need for bespoke fixtures, streamlining changeover and operator training. Controlled chip formation for safer, cleaner machining The double-sided chipbreaker and triangular shape support predictable chip control across varying depths of cut, helping to avoid entanglement and to maintain machine uptime. The insert’s cylindrical hole and robust clamping interface contribute to positional stability, which in turn improves surface finish and dimensional accuracy. Where consistent chip shapes are essential — for example in automated turning cells — the insert offers process security and easier parts handling. Clear specification for purchasing and inventory The insert is available as a single-sided indexable part with a 1.2 mm corner radius and a plate thickness of 4.76 mm, making it suitable for medium to heavy-duty turning tasks where a balance of strength and precision is required. The triangular form provides three cutting edges per position when indexed, improving cost-efficiency per edge compared with single-edge solutions. For production planning, compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. Contact Metav Werkzeuge today to source genuine Tungaloy TNMG160412 T9205 inserts and to discuss optimal grade and chipbreaker selection for specific turning tasks — Metav Werkzeuge can advise on compatibility and delivery, email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785775 SKU manufacturer: TUN6785775 Manufacturer SKU: 6785775-Tungaloy Facts ISO designation: TNMG160412 Size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 60° Clearance angle: 0° Mounting: with cylindrical hole Special features Grade: T9205 CVD-coated carbide Double-sided chipbreaker Triangular plate form Application: Drehen (turning) Compatibility: ISO turning holders and boring bars System components: insert, suitable holder, clamping set and replacement screws FAQ What materials is this insert suited for? The Tungaloy TNMG160412 T9205 insert is formulated as a wear-resistant grade for productive turning of Stahl under stable cutting conditions. How is the insert mounted and referenced? The insert features a cylindrical hole for positive clamping; compatibility with holders is ensured by the ISO TNMG form, clearance angle and plate thickness. How many useful edges does the triangular insert provide? The triangular plate offers multiple indexable edges per insert, allowing economical use of each insert before replacement. Is the chip control suitable for automated turning centres? Yes, the double-sided chipbreaker produces predictable chipforms that aid safe evacuation and consistent cycle times in automated cells. What are the key dimensions to check for holder compatibility? Verify the ISO designation (TNMG160412), plate size (16 mm), thickness (4.76 mm), corner radius (1.2 mm) and clearance angle (0°) against the holder specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T9205 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade and the 1.2 mm nose radius for consistently productive turning of Stahl under stable conditions; order directly via Metav Werkzeuge or contact our consultants for tailored advice. TNMG160412 T9205 ISO Turning Insert for Turning – Tungaloy The TNMG160412 T9205 is an ISO-standard triangular indexable insert designed for productive external and internal turning in industrial machining. CVD-coated carbide for high cutting speeds Double-sided triangular insert, 60° cutting edge 1.2 mm nose radius for stable chip control Cylindrical hole, compatible with ISO holders Optimised performance for productive turning The insert combines a CVD-coated wear-resistant grade, T9205, with a robust carbide substrate to enable higher cutting speeds in stable set-ups. This makes it particularly suited to productive turning of Stahl, where the coating reduces flank wear and extends tool life. The result is improved process stability and more predictable tool-change intervals, helping to sustain throughput on batch and continuous production lines. Geometry and surface quality that support consistency The triangular ISO geometry with a 60° cutting edge angle and 1.2 mm nose radius offers a reliable balance between strength and form accuracy. The double-sided configuration provides two usable cutting edges per side, optimising cost per edge. A cylindrical hole and standard thickness ensure secure clamping in compatible holders; the 0° clearance angle contributes to consistent surface finish on turned components made from Stahl. Compatibility, mounting and system requirements Compatibility with a holder depends on shape, clearance angle, tolerance class, fastening arrangement, size and thickness. The insert fits ISO-standard external holders and boring bars when the matching seat and screw arrangement are specified. In practice, choosing the correct chipbreaker and grade—here T9205—for the material and machining conditions ensures reliable chip formation and reduces rework, particularly in turning applications where tool deflection must be minimised. Practical selection and machining advice For external heavy and general finishing turning in stable setups, select this grade for productive machining at increased cutting speeds. Where component tolerances are critical, the combination of the insert’s geometry and CVD coating supports improved surface quality and repeatability. If high-vibration conditions occur, consider toolholder stiffness and machining parameters rather than a change of insert to maintain process security. For specific application guidance or to order the Tungaloy TNMG160412 T9205 turning insert, contact Metav Werkzeuge – phone +49 2822 7131930 or eMail info@metav-werkzeuge.com – our team will advise on holder compatibility and recommended cutting data Technical Data Article number: 6785774 Manufacturer article number: 6785774 Manufacturer SKU: TUN6785774 SKU: 6785774-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Inscribed circle: 16 mm Thickness: 4.76 mm Nose radius: 1.2 mm Cutting angle: 60° Clearance angle: 0° Hole: with cylindrical hole Special features Grade: T9205 (wear-resistant, CVD-coated carbide) Material: carbide Shape: triangular, double-sided chipbreaker ISO designation: TNMG160412 Application: Drehen (external and internal turning) Compatibility: determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The Tungaloy TNMG160412 T9205 insert is optimised for productive turning of Stahl under stable cutting conditions and higher cutting speeds. How many usable edges does the insert provide? The triangular, double-sided design provides multiple cutting edges, allowing economical use of each insert before replacement. Which holders are compatible with this ISO insert? Compatibility requires an ISO-standard seat matching the TNMG160412 form, correct clearance angle and fastening; confirm holder tolerance class and screw arrangement before assembly. What is the advantage of the T9205 grade? The T9205 grade combines a wear-resistant CVD coating with a carbide substrate to extend edge life and support higher cutting speeds in turning operations on Stahl. Is there a recommended application for the 1.2 mm nose radius? The 1.2 mm nose radius is suited to general turning where a balance between edge strength and surface finish is required; it improves chip control and dimensional stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T9205 Wendeplatten - Tungaloy
High wear resistance and stable chip control are delivered by the CVD-coated T9205 grade on a carbide substrate and the 1.2 mm corner radius, enabling productive steel turning with predictable tool life. Order the TNMG160412 directly via Metav Werkzeuge or consult the technical team for application-specific advice. TNMG160412 T9205 Tungaloy indexable insert for turning A TNMG160412 T9205 indexable insert engineered for productive external and internal turning of steel, featuring a CVD-coated carbide grade and a triangular 60° geometry. CVD-coated carbide T9205 for hard-wearing performance Optimised for productive steel turning Triangular 60° insert with 1.2 mm corner radius Increased throughput thanks to a wear-resistant grade The combination of a CVD-coated surface and a carbide substrate in the T9205 grade supports extended tool life under stable machining conditions. The coating enhances abrasion resistance and reduces flank wear at elevated cutting speeds, which translates directly into longer tool cycles and fewer insert changes. For production environments where cycle time and repeatability matter, this wear-resistant configuration contributes to consistent part batches and lower tooling-related interruptions. Consistent chip control and improved surface quality A double-sided chipbreaker in concert with the triangular geometry provides controlled chip formation across a range of turning operations. The 60° geometry and the 1.2 mm corner radius balance cutting-edge strength with surface finish requirements: the radius increases edge robustness for interrupted cuts and roughing, while the chipbreaker geometry helps evacuate swarf reliably to protect the workpiece finish. The result is a stable cutting process and reduced rework on turned components. Predictable fit and secure clamping for reliable machining Compatibility with holders depends on form, tolerance class, fastening, size and thickness; the insert’s ISO-standard specification simplifies selection of the correct external holder or boring bar. With a plate thickness of 4.76 mm and a cylindrical hole for secure fastening, the insert integrates into standard tool systems without modification. This predictable fit reduces setup time, minimises the risk of improper clamping and supports repeatable positioning in multi-insert tools. Application-focused system benefits for workshop efficiency The insert is designed as part of a complete system: ISO turning insert, matching external holder or boring bar, shim/clamp set and spare screws. The T9205 grade is tailored to steel machining under stable conditions and at higher cutting speeds, offering a productive solution for workshops that prioritise throughput and repeatability. Selecting the appropriate chipbreaker and grade according to workpiece material and machine stability ensures the best compromise between tool life and surface quality. Contact Metav Werkzeuge for tailored advice on Tungaloy’s T9205 grade and assistance in matching the TNMG160412 insert to the correct holder and machining parameters. Metav Werkzeuge can be reached at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6785672 Manufacturer SKU: TUN6785672 SKU: 6785672-Tungaloy Model series: ISO turning indexable inserts Facts Insert size (IC): 16 Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Geometry angle: 60° Special features Material: carbide Coating: CVD-coated Grade: T9205 Chipbreaker: double-sided Plate form: triangular Hole: with cylindrical hole Application: turning FAQ What materials is this insert suited for? The TNMG160412 T9205 insert is optimised for productive machining of steel; the T9205 CVD-coated carbide grade provides wear resistance suited to higher cutting speeds under stable conditions. How does the corner radius affect performance? A 1.2 mm corner radius increases edge strength for interrupted cuts and roughing, improving tool life and contributing to a consistent surface finish when using the TNMG160412 insert in turning operations. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions and mounting features; compatibility is governed by form, relief angle, tolerance class, fastening type, size and thickness, enabling secure clamping in standard external holders and boring bars. Can the TNMG160412 be used for internal turning? The triangular geometry and secure cylindrical-hole fastening allow use in suitable boring bars as well as external holders, making the insert appropriate for both external and internal turning when installed in the correct tool assembly. What key system components are required for assembly? A complete system comprises the ISO indexable insert, a matching external holder or boring bar, a shim/clamp set and spare screws; this system approach ensures safe clamping and repeatable positioning of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T9215 Wendeplatten - Tungaloy
Take advantage of a proven balance between wear resistance and breakage safety for steady productivity in turning operations; the combination of a CVD-coated carbide grade (T9215) and a robust triangular geometry ensures reliable performance in continuous to lightly interrupted cuts — order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. TNMG160412 T9215 — Turning indexable insert, CVD-coated carbide, 60°, Tungaloy TNMG160412 T9215 is an ISO-standard triangular turning insert for medium steel machining, designed to combine high wear resistance with reliable chip control in continuous and light intermittent cuts CVD-coated grade T9215 for medium steel Triangle insert with 60° cutting angle Corner radius 1.2 mm for robust form Double-sided chipbreaker for consistent chips High-performance grade that raises productivity The CVD-coated carbide grade T9215 is engineered for the demands of medium steel turning, offering a controlled balance between abrasion resistance and edge toughness. This balance reduces flank wear while limiting chipping under stable cutting conditions, so the tool life becomes more predictable. For production environments where cycle time and tool-change frequency affect throughput, the improved wear resistance translates into measurable gains in process efficiency and lower downtime for edge changes. Geometry and tolerance for secure clamping and accuracy The triangular geometry with a 60° included angle and a corner radius 1.2 mm delivers a universal profile suited to a range of turning tasks, from light profiling to robust roughing. With a relief angle of 0° and a plate thickness of 4.76 mm, the design matches common ISO holders; the insert features a cylindrical hole for standard clamping systems. The geometry helps maintain cutting-edge stability under moderate forces and supports repeatable positioning — an asset when consistent surface quality and dimensional control are required in series production. Controlled chip formation and recommended cutting conditions Equipped with a double-sided chipbreaker, the insert facilitates reliable chip formation across a variety of feeds and depths of cut. The chipbreaker geometry is optimised for continuous and light interrupted cuts, reducing the risk of long, stringy chips and improving evacuation in confined tool zones. For best results, select the chipbreaker and a holder with adequate rigidity, and favour coolant strategies that assist chip removal; these measures enhance surface finish and extend the interval between indexings. Practical advantages for workshop integration As an ISO-standard component, the insert simplifies inventory management and compatibility checks: form, clearance angle, tolerance class, fixing type, size and thickness determine holder fit. The combination of CVD-coated carbide, robust geometry and standardised mounting supports fast replacement and predictable tool life, helping to reduce machining variance. For technical queries or to confirm suitability for a specific material or operation, Metav Werkzeuge provides application advice and detailed specifications. Contact Metav Werkzeuge for application support and stock information regarding the Tungaloy TNMG160412 T9215 insert: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 6772315 SKU: 6772315-Tungaloy Manufacturer SKU: TUN6772315 Model series: ISO turning indexable inserts Core dimensions Plate designation: 160412 (ISO) Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Included angle: 60° Relief angle: 0° Hole: cylindrical Features CVD-coated carbide Grade: T9215 Triangular plate form (TNMG) Double-sided chipbreaker Suitable for turning Compatible with ISO-standard holders Designed for continuous to light interrupted cuts FAQ What materials is this insert suited for? The TNMG160412 T9215 insert is specified primarily for medium steel machining and performs best where a balance of wear resistance and toughness is required. Which holder types are compatible with this insert? Compatibility is determined by form, relief angle, tolerance class, fixing method, size and thickness; the TNMG geometry fits standard ISO turning holders designed for 16 mm triangular inserts. What cutting conditions does the chipbreaker support? The double-sided chipbreaker on this insert is optimised for continuous and light interrupted cuts, promoting consistent chip control and improved evacuation. How does the T9215 grade affect tool life? T9215’s CVD-coated carbide composition increases wear resistance while maintaining edge integrity, which yields more predictable and often longer tool life under appropriate machining parameters. How is the insert identified for reordering? Reorder using the article number 6772315 or SKU 6772315-Tungaloy; the designation TNMG160412 and grade T9215 ensure precise replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T9215 Wendeplatten - Tungaloy
Combine high productivity and robust wear resistance: the CVD-coated carbide T9215 and a 1.2 mm corner radius deliver stable cutting performance for medium-steel turning, while the ISO triangular form ensures simple indexability and cost-effective tool use. Order directly via Metav Werkzeuge or consult our technical advisers for selection support. TNMG160412 T9215 indexable turning insert (ISO triangle) for turning — Tungaloy TNMG160412 T9215 is a triangular ISO indexable insert developed for productive turning of medium-strength steels, offering a balance of wear resistance and fracture toughness. CVD-coated carbide T9215 for wear resistance 1.2 mm corner radius for edge strength ISO triangular form, 60° included angle Double-sided insert with cylindrical hole Boosted productivity through a wear-resistant grade The CVD-coated carbide specification T9215 combines high abrasion resistance with controlled fracture behaviour, making the insert particularly suitable for continuous-to-slightly-interrupted turning operations. The protective CVD layer reduces flank wear and extends tool life under stable cutting parameters, which directly supports higher cutting speeds and longer tool cycles. This results in shorter machining times and lower tooling cost per component when processing medium steel. Stable cutting geometry for repeatable results Designed as an ISO triangle with a 60° included angle and a 1.2 mm corner radius, the insert offers a conservative edge geometry that improves stability at the tool tip. The 0° clearance permits predictable engagement in light to medium feed ranges and simplifies seat alignment in compatible holders. Because compatibility depends on form, clearance, tolerance class, fastening, size and thickness, the insert’s standard ISO family ensures interchangeability across a wide range of external holders and boring bars, supporting consistent clamping and repeatable component accuracy. Practical design and secure clamping for everyday turning The double-sided construction with a cylindrical hole allows economical use of both cutting edges and reliable fastening with common screw systems; swapping indexed edges is straightforward during routine tool maintenance. The 4.76 mm plate thickness and 16 mm inscribed size provide a robust body that resists bending and vibration in medium-duty machining. For workshops aiming to keep setup times low, the insert’s standardised geometry reduces inventory complexity while enabling predictable surface finish and dimensional control. Simple selection advice and machining behaviour For turning applications select a chipbreaker and grade that match the workpiece material and cutting conditions; the present grade is optimised for medium steel and performs best under steady cuts with occasional interruptions. When in doubt about holder compatibility, verify seat form, clearance angle and thickness against the toolholder specification—this prevents mis-seating and ensures intended cutting behaviour. The combination of T9215 wear properties and the insert’s geometry delivers balanced performance: reliable edge life and good surface quality without excessive operational risk. Contact Metav Werkzeuge for tailored cutting data and availability of the Tungaloy TNMG160412 T9215 insert; call +49 2822 7131930 or email info@metav-werkzeuge.com for practical application advice and order support Technical data Article number: 6772319 Manufacturer SKU: TUN6772319 SKU: 6772319-Tungaloy Designation: TNMG160412 Core specifications Corner radius: 1.2 mm Included angle: 60° Clearance angle: 0° Thickness: 4.76 mm Size (inscribed circle): 16 mm Special features CVD-coated carbide (T9215) Triangular, double-sided insert Cylindrical hole for secure fastening For turning; medium steel applications Model series: ISO turning indexable inserts FAQ What materials is this insert recommended for? The TNMG160412 T9215 insert is optimised for medium steel; the T9215 CVD-coated carbide provides wear resistance suited to continuous-to-slightly-interrupted cuts in steel. Is the insert compatible with standard ISO triangular holders? Yes, the TNMG160412 follows ISO triangular geometry; compatibility is determined by holder seat form, clearance angle, tolerance class, fastening and thickness. How many cutting edges are available per insert? This triangular insert is double-sided, offering two usable cutting edges per side and enabling multiple indexing events before replacement. What are the key dimensions to check for holder matching? Verify the inscribed size (16 mm), thickness (4.76 mm), corner radius (1.2 mm) and the presence of a cylindrical hole to ensure correct seating and clamping. Can the insert handle interrupted cuts? The T9215 grade balances fracture toughness and wear resistance and is suitable for continuous machining and light interruptions; heavy interruptions may require a different geometry or tougher grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade that combines high wear resistance with fracture safety for productive medium-steel turning. The ISO‑compliant triangular geometry and a 1.2 mm corner radius deliver stable chip control and repeatable results — order directly via Metav Werkzeuge or consult the team for process-specific advice. TNMG160412 T9215 turning insert (ISO) by Tungaloy – CVD-coated carbide, 60° A TNMG160412 T9215 ISO‑standard turning insert engineered for external and internal turning of medium steels, offering a robust balance of wear resistance and edge stability. ISO triangular insert TNMG160412, 60° geometry CVD-coated carbide grade T9215 for medium steel 1.2 mm corner radius for stable chip control Double-sided chipbreaker, cylindrical hole design Maximise throughput with a wear‑resistant grade The T9215 grade is a CVD‑coated carbide developed as a first choice for medium steel machining. Its composition pairs elevated wear resistance with reliable fracture resistance, which supports higher productivity in continuous to lightly interrupted cuts. In practice, this means fewer unscheduled indexings and more consistent component output — a direct contribution to process efficiency and lower unit costs per part. Simple integration into ISO tooling systems for consistent accuracy As an ISO indexable insert, compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness. The triangular 60° geometry and a thickness of 4.76 mm make the insert straightforward to match with standard external holders and boring bars. The presence of a cylindrical hole and defined tolerance classes ensures repeatable seating and clamping, which translates into consistent dimensional accuracy across production batches. Better chip control and surface quality from geometry and chipbreaker The combination of a 1.2 mm corner radius and a double‑sided chipbreaker stabilises cutting forces and promotes controlled chip formation. For turning operations this reduces vibration and improves surface finish without sacrificing cutting edge life. The corner radius acts as a mechanical support for the cutting edge, lowering the risk of edge chipping during intermittent engagements and increasing process reliability. Practical guidance for setup and application flexibility Designed for external and internal turning, the insert is best employed where medium steels are predominant and where steady, productive cycles are required. Selection of an appropriate chipbreaker and the correct holder geometry is essential to exploit the T9215 advantages; holders should match the insert's 60° form and 4.76 mm thickness. System components typically comprise the insert, a matching external holder or boring bar, a support shim or clamp set, and replacement fastening screws to maintain operational readiness. If application parameters or material variations require clarification, technical advisory is available to ensure optimal insert choice and process settings. Discuss specific application requirements with Metav Werkzeuge to confirm suitability and availability; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and supply options. Technical Data Article number: 6772339 Manufacturer SKU: TUN6772339 Our SKU: 6772339-Tungaloy Article name: TNMG160412 T9215 Tungaloy insert Facts Insert designation: TNMG160412 ISO code: 160412 Corner radius: 1.2 mm Clearance angle: 0° Included angle: 60° Thickness: 4.76 mm Size: 16 mm Hole: cylindrical hole Special features Material: carbide (Hartmetall) Coating / grade: T9215 (CVD‑coated) Double‑sided chipbreaker Triangular plate form Application: external and internal turning Suitable for continuous to lightly interrupted cuts FAQ What materials is the TNMG160412 T9215 insert best suited for? The Tungaloy TNMG160412 T9215 insert is specified primarily for medium steel machining; the CVD coating and carbide substrate combine to resist wear while maintaining fracture safety under typical turning conditions. Can this insert be used for both external and internal turning? Yes, the insert is intended for external and internal turning operations; selection of the matching holder and chipbreaker is important to achieve the desired stability and surface finish. How is compatibility with a toolholder ensured? Compatibility depends on the insert form, clearance angle (0°), tolerance class, fastening type, size (16 mm), and thickness (4.76 mm); these dimensions determine correct seating and clamping with standard ISO holders for the TNMG160412. Which geometric features affect surface finish and edge life? Key geometry elements include the 1.2 mm corner radius, the 60° triangular profile and the double‑sided chipbreaker; together they influence cutting forces, chip shape and consequently surface quality and tool longevity. What advantages does the T9215 grade provide? The T9215 grade (CVD‑coated carbide) offers a balance of wear resistance and fracture resistance, making it suitable for productive machining of medium steels where a consistent cutting edge and high throughput are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, a 1.2 mm corner radius and a double-sided triangular design for reliable, productive turning of medium steel; order or request application advice via Metav Werkzeuge. TNMG 160412 T9215 – TNMG turning insert by Tungaloy, CVD-coated carbide TNMG160412 is an ISO‑standard indexable turning insert designed for medium‑steel machining with a robust CVD coating for extended tool life. CVD-coated carbide grade T9215 Optimised for medium steel machining Double-sided triangular insert Cylindrical-hole, ISO-compatible design High wear resistance for productive medium-steel turning The combination of CVD-coated carbide and the T9215 grade provides a measured balance between wear resistance and fracture toughness, making the insert especially suitable for continuous to lightly interrupted turning of medium steel. The CVD layer increases surface hardness and heat resistance, which reduces flank wear and helps maintain consistent cutting geometry over longer tool life. As a result, cycle times can be shortened and tool-change frequency reduced, supporting higher throughput on repetitive turning operations. Geometry and compatibility for predictable tool life A double-sided, triangular geometry delivers two usable cutting edges per side, improving insert utilisation and lowering tooling cost per part. The 1.2 mm corner radius offers enhanced edge strength for general turning tasks while balancing surface finish—larger radii increase edge life, smaller radii improve detail and finish. The insert features a cylindrical hole and ISO‑conforming form, with compatibility to holders determined by form, relief angle, tolerance class, fastening, size and thickness. The 0° relief angle and 60° geometry ensure predictable contact and force distribution for stable machining. Application guidance for consistent, process-safe results Designed for external and internal turning, the insert performs best when matched with a suitable chipbreaker and the correct cutting data for the chosen workpiece and machine stability. For medium‑steel components produced under stable cutting conditions, the grade’s blend of wear and fracture resistance supports higher material removal rates and consistent surface quality. Where interrupted cuts or unstable setups occur, selecting an appropriate chip control variant and moderating feed rates preserves edge integrity and avoids premature edge chipping, thereby safeguarding process reliability and repeatability. Contact Metav Werkzeuge for application-specific recommendations and to request the Tungaloy TNMG160412 T9215 insert; Metav Werkzeuge can provide cutting data sheets and supply guidance to integrate the insert into existing ISO holders – eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical Data Article number: 6772337 SKU: 6772337-Tungaloy Manufacturer SKU: TUN6772337 Manufacturer: Tungaloy Facts Model series: ISO-Drehwendeschneidplatten Plate size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Angle: 60° Relief angle: 0° Special features Material: carbide Coating / grade: T9215 (CVD-coated carbide) Plate shape: triangular Hole: with cylindrical hole Chipbreaker: double-sided Intended application: turning (external and internal) Compatible with ISO holders; compatibility depends on form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The TNMG160412 T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade offers a balance of wear resistance and toughness for productive turning. How does the insert’s geometry affect performance? A triangular, double-sided form offers multiple cutting edges and economical use, while a 1.2 mm corner radius increases edge strength and helps prevent premature chipping under moderate cutting loads. What determines compatibility with an indexable holder? Compatibility is defined by form, relief angle, tolerance class, fastening type, plate size and thickness; holders must match the ISO geometry and fastening method for secure clamping. Is the T9215 grade suitable for interrupted cuts? T9215 combines wear resistance with fracture safety and is suitable for continuous to lightly interrupted cuts; for severe interruptions, select a chipbreaker and cutting data adjusted to the application. What is the article and manufacturer identification for ordering? The insert is listed as article number 6772337 (SKU 6772337-Tungaloy), manufacturer SKU TUN6772337, supplied by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide, a robust corner radius 1.2 mm and ISO compatibility for reliable, productive medium‑steel turning; order the TNMG160412 T9215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG160412 T9215 TNMG Turning Insert for Turning – Tungaloy TNMG160412 T9215 is an ISO‑format triangular indexable insert for external and internal turning, optimised for medium steel machining and continuous to light interrupted cuts. CVD-coated cemented carbide for high wear resistance Designed for productive medium steel turning Triangular 16 mm insert, 60° cutting angle Double-sided chipbreaker, cylindrical-hole design Reliable productivity through material and grade The combination of a CVD coating and cemented carbide base in this grade delivers consistent wear resistance and edge security during extended runs. The T9215 specification has been selected for medium steel applications to balance tool life and strength; this supports higher cutting speeds and longer intervals between index changes. For operations where throughput matters, the insert’s material composition reduces downtime and keeps production stable. Precise geometry for predictable machining results A triangular insert with a 60° cutting angle and corner radius 1.2 mm provides a predictable cutting geometry that simplifies tool setup and repeatability. The ISO dimensions ensure compatibility with a wide range of standard holders, while the 4.76 mm thickness and 16 mm size contribute to bending stiffness and edge support. These geometrical details translate into steadier surface finishes and fewer unexpected tool failures during routine turning tasks. Versatile chip control and application range Equipped with a double-sided chipbreaker and a cylindrical hole, the insert offers effective chip control for the specified application window of continuous to light interrupted cuts. The chipbreaker design helps evacuate swarf reliably and supports stable cutting forces, improving dimensional consistency on both external and internal turning. As a result, the insert is suited to a wide range of part geometries where consistent chip flow and repeatable quality are required. Practical integration and handling benefits As an ISO‑standard turning insert, TNMG160412 fits into an established system comprising the insert, a matched holder or boring bar, a clamp or shim set, and replacement screws. Compatibility is determined by shape, relief angle (0°), tolerance class, attachment method, size and thickness; this makes selection straightforward for maintenance teams and reduces the need for bespoke tooling. The grade’s balance of toughness and wear resistance supports reliable performance even under light interruptions, lowering the risk of unexpected edge chipping. For dependable medium‑steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for supply and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6772342 Manufacturer SKU: TUN6772342 SKU: 6772342-Tungaloy Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TNMG160412 Facts Corner radius: 1.2 mm Plate size: 16 mm Plate thickness: 4.76 mm Cutting angle: 60° Relief angle: 0° Special features CVD-coated cemented carbide (T9215) Triangular plate, double-sided chipbreaker Cylindrical hole Intended use: external and internal turning Best for medium steel, continuous to light interrupted cuts FAQ What materials is this insert intended for? The TNMG160412 T9215 insert is specified for medium steel machining; the T9215 grade combines wear resistance and toughness for productive turning. How does the chipbreaker affect machining? The double-sided chipbreaker on this ISO‑format insert improves chip control and contributes to stable cutting forces, which helps achieve consistent surface quality during turning operations. Is the insert compatible with standard holders? Yes — the insert conforms to ISO dimensions; compatibility depends on holder form, relief angle, tolerance class, attachment method, size and thickness, enabling use with common external and internal turning holders. What cutting conditions suit this grade best? T9215 is designed for continuous to light interrupted cuts in medium steel where a balance of wear resistance and fracture strength is required to maintain productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com