TNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness and the universal T9225 grade for reliable medium-to-heavy turning, plus easy indexability for fast tool changes. Order genuine Tungaloy parts or consult Metav Werkzeuge for application guidance and immediate availability. TNMG 160408 T9225 indexable turning insert (ISO TNMG160408) by Tungaloy — CVD-coated carbide, 0.8 mm radius The TNMG160408 T9225 is an ISO-standard triangular indexable insert designed for external and internal turning in medium-to-heavy steel applications, offering robust performance under varying engagement conditions. CVD-coated carbide grade T9225 ISO TNMG 160408 triangular insert 0.8 mm corner radius for robust cutting Double-sided chipbreaker and central hole Consistent cutting performance for medium-to-heavy steel turning The CVD-coated carbide composition of this insert is formulated to balance wear resistance and toughness. The T9225 grade excels in situations with variable engagements or slightly interrupted cuts, delivering stable cutting performance and extended tool life compared with uncoated grades. The combination of coating and substrate reduces flank wear and supports predictable tool change intervals, which helps to keep machining cycles efficient and repeatable. Faster indexability and lower downtime A triangular, double-sided insert design provides multiple cutting edges per part, enabling rapid indexing and reduced tooling costs over time. The central cylindrical hole and standardised form make clamping secure and repeatable in ISO holders, so changeovers are straightforward and tactile. Reduced downtime during insert changes directly improves productivity and supports tighter production schedules on turning centres and lathes. Geometry engineered for stability and surface quality With a 0.8 mm corner radius and a 60° seat angle, the insert offers a compromise between edge strength and the ability to achieve fine surface finishes. The modest radius absorbs cutting shocks and improves edge life during heavier depths of cut, while the seating angle and triangular shape contribute to consistent chip formation. The double-sided chipbreaker aids efficient chip control for typical steel machining operations, assisting in maintaining surface integrity and process stability. Compatibility, selection and application advice Compatibility with toolholders depends on form, clearance angle, tolerance class, fastening method, size and thickness; the ISO designation ensures broad compatibility with standard TNMG turning holders. The insert is best used for steel turning where robustness is required—select the T9225 grade when encountering mixed engagement conditions or mildly interrupted cuts. For tailored cutting data and optimal holder pairing, Metav Werkzeuge can provide application-specific recommendations based on machine rigidity and part geometry. For reliable medium-to-heavy steel turning with genuine Tungaloy performance, contact Metav Werkzeuge for technical advice or to secure stock of TNMG160408 T9225 inserts — Email: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6780777 Manufacturer SKU: TUN6780777 Manufacturer article no.: 6780777 ISO designation: TNMG160408 Brand: Tungaloy Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Seat/approach angle: 60° Clearance angle: 0° Hole: with cylindrical hole Special features Material: carbide Coating: CVD Grade: T9225 Shape: triangular Chipbreaker: double-sided Application: external and internal turning Compatibility: ISO-standard TNMG holders FAQ What materials is this insert suitable for? The TNMG160408 T9225 insert is optimised for steel machining, particularly medium-to-heavy turning where a balance of wear resistance and toughness is required. Is this insert indexable and reversible? Yes, the triangular indexable insert is double-sided, offering multiple usable cutting edges for economical use and straightforward indexing. How does the T9225 grade cope with interrupted cuts? The T9225 grade is formulated to provide additional toughness for slightly interrupted cuts and variable engagement conditions, improving edge security under shock loads. Which holder characteristics determine compatibility? Compatibility requires matching the insert form, clearance angle, tolerance class, fastening method, size and thickness to the holder; the ISO designation simplifies this process for standard TNMG holders. What are the key dimensions to check before ordering? Confirm the ISO designation TNMG160408, insert size 16 mm, thickness 4.76 mm, corner radius 0.8 mm and the 60° seating angle to ensure the insert fits the intended holder and application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and a robust universal grade T9225 to secure consistent performance in medium to heavy steel turning; the ISO compatibility simplifies tool selection and replacement. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. TNMG 160408 T9225 TNMG turning insert — CVD-coated carbide, 0.8 mm radius — Tungaloy TNMG160408 T9225 is an ISO-standard indexable insert for external and internal turning, engineered for medium to heavy steel machining with good toughness for slightly interrupted cuts. ISO-standard triangular insert TNMG 160408 CVD-coated carbide grade T9225 0.8 mm corner radius for versatile turning Double-sided chipbreaker with cylindrical hole Consistent cutting performance for demanding steel turning The combination of a CVD-coated surface and carbide substrate provides a balanced mix of wear resistance and toughness, which supports stable production in harsher cutting conditions. The T9225 grade is formulated as a robust universal option for medium to heavy steel machining, offering predictable edge life where chip formation and occasional interruptions occur. This leads to fewer unexpected tool changes and steadier cycle times on the shop floor, improving throughput without compromising component quality. Designed for reliable fit and straightforward interchangeability Manufactured to ISO dimensions, the insert’s triangular form and defined geometry ensure compatibility with standard ISO holders when the form, clearance angle, tolerance class, fastening method, size and thickness match the tooling system. The insert features a 0° clearance angle, a cylindrical hole and a 4.76 mm thickness, which together influence seating accuracy and clamping stability. Clear specification of these parameters permits confident selection of clamping sets and replacement hardware, reducing downtime during indexation or tool changeovers. Practical advantages and suggested applications The 0.8 mm corner radius balances strength and finish, allowing controlled engagement in external and internal turning operations while maintaining acceptable surface quality. The double-sided chipbreaker supports consistent chip control across a range of cutting conditions, making the geometry suitable for general-purpose turning as well as slightly interrupted cuts. The system approach — insert plus matching outer holder or boring bar, shim/clamp set and replacement screws — simplifies inventory and promotes efficient tool management in production environments. For further technical clarifications, Metav Werkzeuge can supply supplementary data sheets and compatibility guidance. Discuss application requirements with Metav Werkzeuge to match the TNMG160408 T9225 precisely to the machining setup and to receive tailored recommendations for holder and clamping components. Technical Data Article number: 6781246 Manufacturer SKU: TUN6781246 SKU: 6781246-Tungaloy Model series: ISO turning indexable inserts Insert designation: TNMG160408 Material: carbide Coating/type: T9225 (CVD-coated carbide) Application: Turning Facts Thickness: 4.76 mm Size: 16 mm Corner radius: 0.8 mm Angle: 60° Clearance angle: 0° Hole: with cylindrical hole Special features Triangular form Double-sided chipbreaker ISO-standard geometry Robust universal grade for medium to heavy steel Compatible system: insert, outer holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert suitable for? The TNMG160408 T9225 insert is intended primarily for medium to heavy steel machining; the T9225 grade offers the toughness needed for variable engagement and slightly interrupted cuts. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO-standard dimensions, but compatibility depends on matching the form, clearance angle, tolerance class, fastening method, size and thickness of the holder. What is the purpose of the double-sided chipbreaker and cylindrical hole? The double-sided chipbreaker supports reliable chip control across a range of cutting conditions, while the cylindrical hole enables secure clamping and accurate seating in the chosen holder. How does the 0.8 mm corner radius affect machining results? A 0.8 mm corner radius provides a compromise between edge strength and surface finish, making the geometry versatile for a variety of turning tasks, including medium-depth cuts and semi-finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a robust T9225 grade, CVD-coated cemented carbide, and full ISO compatibility for reliable medium-to-heavy steel turning; the result is consistent chip control and longer tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG 160408 T9225 – Indexable Turning Insert for Turning, Tungaloy TNMG160408 T9225 Tungaloy insert designed for ISO-standard external and internal turning where medium to heavy steel machining requires toughness and stable chip control ISO‑compatible triangular insert 16 mm CVD‑coated cemented carbide grade T9225 Double‑sided chipbreaker for consistent chips 0° relief angle and cylindrical hole for secure clamping Consistent performance under changing machining conditions The CVD‑coated cemented carbide construction and the T9225 grade deliver a dependable balance between hardness and toughness, which is particularly valuable when cuts are intermittently interrupted or engagement conditions vary. This translates into stable cutting edges, reduced breakages and fewer unplanned tool changes. The triangular geometry with a 0° relief angle and a cylindrical hole ensures secure seating in compatible holders, helping to maintain repeatable machining results in both roughing and finishing passes. Predictable chip control and productivity gains Equipped with a double-sided chipbreaker, the insert promotes reliable chip formation across a range of cutting parameters, reducing the risk of recutting and machine downtime. For production environments this means higher process stability and improved cycle times: better chip evacuation supports uninterrupted feeds and contributes to surface quality. When combined with a suitable external holder and correct feed settings, the insert helps to improve overall productivity without sacrificing part accuracy. Easy integration into ISO‑based tool systems The item follows established ISO dimensions and tolerances, making compatibility with standard holders straightforward when matching form, clearance angle, tolerance class, clamping type, size and thickness. Users benefit from simplified tool management and inventory planning, since the insert fits common carriers used for external and internal turning. Clear ISO designation and standard sizing are advantages for mixed-machine shops seeking interchangeability and reduced setup complexity. Durable choice for medium to heavy steel applications Selected for its robustness, the grade is targeted at a wide range of steels where a tougher microstructure is needed to withstand variable cutting forces. The T9225 grade is suitable for operations that require repeatable performance and good edge stability. That durability supports longer tool life and fewer index changes, which can lower per-part tooling costs and improve overall manufacturing efficiency. For technical matching advice or to secure a supply of Tungaloy inserts from Metav Werkzeuge, contact Metav Werkzeuge via eMail: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants are available to recommend the optimal chipbreaker and holder pairing for specific steel grades and cutting conditions. Technical data Article number: 6780936 Manufacturer SKU: TUN6780936 SKU: 6780936-Tungaloy Model series: ISO‑Drehwendeschneidplatten ISO designation: TNMG160408 Grade: T9225 Facts Material: cemented carbide Coating / type: CVD‑coated Corner radius: 0.8 mm Relief angle: 0° Plate thickness: 4.76 mm Special features Plate shape: triangular Plate size: 16 Chipbreaker: double‑sided Hole: with cylindrical hole Typical application: external and internal turning FAQ What materials is this insert suitable for? This insert, featuring a CVD‑coated cemented carbide grade T9225, is engineered for medium to heavy steel machining and performs well where increased toughness is required. How is compatibility with tool holders ensured? Compatibility depends on form, relief angle, tolerance class, clamping type, size and thickness; the ISO designation TNMG160408 allows easy matching with standard holders for turning operations. Can the insert be used for interrupted cuts? Yes; the T9225 grade offers enhanced toughness for applications with variable engagement or light interruptions, supporting edge stability under such conditions. Does the chipbreaker work for both roughing and finishing? The double‑sided chipbreaker provides consistent chip control across a range of feeds, making it suitable for both heavier roughing passes and more controlled finishing operations when set appropriately. What distinguishes the T9225 grade from other grades? T9225 is a robust, universal grade delivering a balance between wear resistance and toughness, intended for versatile steel machining where variable cutting conditions demand dependable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide composition and the ISO TNMG160408 geometry for robust performance in medium to heavy steel turning; order the insert via Metav Werkzeuge or consult our technical advisors for compatibility and availability. TNMG 160408 T9225 Turning insert (ISO TNMG160408) by Tungaloy — CVD-coated carbide, 60° triangle The TNMG 160408 T9225 is an ISO-standard turning insert designed for external and internal turning, offering a universal, robust grade suitable for interrupted cuts and varying engagement conditions. *ISO TNMG 160408 geometry, 60° triangle *CVD-coated carbide grade T9225 *Double-sided insert with 0.8 mm corner radius *Compatible with standard external/internal holders Consistent chip control for variable cutting conditions The CVD-coated composition and T9225 grade deliver a balance of hardness and toughness that stabilises chip formation under changing loads. The triangular 60° geometry provides multiple cutting edges and a versatile cutting direction, while the double-sided design maximises usable edges for efficient turnarounds. This configuration is especially suited to operations where intermittent cuts or varying depths require a material that resists chipping without compromising cutting capacity. Extended tool life through a robust grade and geometry A thicker plate and a compact corner radius combine to reduce local stress at the cutting edge, which translates into longer in-service life and fewer indexings. The insert’s 0.8 mm corner radius promotes edge strength for heavier cuts, and the substantial plate thickness of 4.76 mm supports stable clamping and heat distribution. Together, these features reduce flank wear and enable predictable intervals between tool changes, supporting improved uptime and lower tool consumption per component. Predictable fit and fast changeover in ISO systems Compatibility with toolholders is defined by geometry, clearance angle, tolerance class, fastening method, size and thickness; the ISO TNMG160408 form ensures straightforward interchangeability in standard holders when those criteria are matched. The insert features a cylindrical hole for secure mounting and a 0° clearance angle that suits many conventional external and internal turning set-ups. Clear identification of form and size simplifies tool management and reduces the risk of mismatched assemblies during production planning. Practical guidance for steel turning applications Designed as a universal, robust cutting grade for medium to heavy steel machining, this insert performs well where occasional interruptions or fluctuating cutting conditions demand extra toughness. Select a chipbreaker and holder arrangement appropriate to the operation’s stability and feed rate to get the best surface finish with a low risk of edge failure. For complex materials or critical surface requirements, pairing the insert with a suitable holder and clamping kit will enhance process reliability and repeatability. For process reliability with Tungaloy’s T9225 grade and ISO TNMG160408 geometry, contact Metav Werkzeuge for application advice and availability: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6780807 SKU: 6780807-Tungaloy Manufacturer SKU: TUN6780807 Facts Geometry: TNMG160408 Size: 16 mm Thickness: 4.76 mm Angle: 60° Corner radius: 0.8 mm Special features Material: Carbide Coating: CVD Grade: T9225, universal for medium–heavy steel Double-sided, cylindrical hole, triangle shape Clearance angle: 0° Application: Turning, external and internal turning FAQ What materials is this insert best suited for? The insert is specified as grade T9225, a CVD-coated carbide designed for robust, universal use in medium to heavy steel turning applications and is manufactured by Tungaloy. Is the insert indexable on both sides? Yes, the indexable cutting insert is double-sided, providing multiple edges to extend usable life and reduce changeover frequency. What is the corner radius and how does it affect performance? The insert has a 0.8 mm corner radius, which increases edge strength for heavier cuts and helps prevent chipping during intermittent or unstable cutting conditions. Which holders are compatible with the TNMG160408 form? Compatibility is achieved with holders that accept the ISO TNMG160408 geometry, matching size, thickness and fastening type; the insert’s cylindrical hole and ISO form ensure reliable mounting in standard external and internal turning holders. Does the coating improve wear resistance? The CVD coating on this carbide insert enhances wear resistance at elevated temperatures and supports stable cutting performance, contributing to predictable tool life in demanding steel turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Benefit from a robust, CVD-coated T9225 carbide grade and a 60° triangular geometry with a 0.8 mm corner radius for reliable performance in medium to heavy steel turning; order via Metav Werkzeuge or consult our technical team for application support. TNMG 160408 T9225 indexable turning insert — Tungaloy, CVD-coated carbide, 60° geometry The TNMG160408 T9225 is an ISO-standard triangular indexable insert designed for medium to heavy turning applications where interrupted cuts or varying engagement demand added toughness. CVD-coated carbide for high wear resistance For medium to heavy steel turning Double-sided chipbreaker for reliable chip control 60° triangular geometry, 0.8 mm corner radius Built for dependable steel machining and consistent tool life The insert combines a CVD coating with carbide substrate in the T9225 grade to balance wear resistance and toughness. This configuration is suited for medium to heavy steel turning where cutting conditions can vary or be slightly interrupted; the tougher microstructure reduces the risk of chipping and extends edge life. The result is fewer unplanned tool changes and a more continuous production flow, which supports higher overall machining efficiency and predictable maintenance intervals. Simple integration with ISO holders and clear compatibility criteria Compatibility is determined by insert form, clearance angle, tolerance class, fastening type, size and thickness. The ISO-series design allows straightforward replacement into standard external holders and boring bars when the correct form and clamping arrangement are selected. Selecting the matching chipbreaker and grade according to workpiece stability and cutting strategy ensures optimal cutting forces and surface quality, making integration into existing setups efficient and low risk. Geometry that balances edge strength and surface finish The 60° geometry and 0.8 mm corner radius provide a robust cutting edge that tolerates heavier feed and interrupted cuts while still enabling acceptable surface finishes. The triangular indexable shape offers economical indexing; the double-sided chipbreaker helps produce consistent, manageable chips under a range of cutting parameters. The central cylindrical hole secures positive clamping, which reduces micro-vibration and helps maintain repeatable cutting performance through the insert life. Productivity gains through grade choice and application focus Choosing the T9225 grade delivers a universal, robust option for mixed steel workloads — it is designed to perform reliably when cutting conditions change and when slightly interrupted cuts occur. The combination of CVD-coated carbide and thoughtful geometry focuses on process stability and cost-effective production: longer tool life per edge, reduced downtime for regrinds or replacements, and consistent workpiece quality. For operations seeking steady throughput in general steel turning tasks, this insert supports a pragmatic balance of performance and economy. For reliable, CVD-coated carbide performance from Tungaloy, contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780915 SKU: 6780915-Tungaloy Manufacturer SKU: TUN6780915 Manufacturer: Tungaloy Facts ISO designation: 160408 Insert designation: TNMG160408 Size: 16 mm Thickness: 4.76 mm Clearance angle: 0° Geometry angle: 60° Corner radius: 0.8 mm Special features Material: Carbide Grade/coating: T9225, CVD-coated carbide Plate shape: Triangular Hole: with hole (cylindrical hole) Chipbreaker: Double-sided Model series: ISO indexable turning inserts Typical application: Turning FAQ What materials is this insert intended for? The TNMG160408 T9225 insert (Tungaloy indexable turning insert, SKU TUN6780915) is optimised for medium to heavy steel turning; the T9225 grade balances toughness and wear resistance for variable engagement conditions. How is compatibility with a holder determined? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these specifications to the holder ensures the TNMG160408 seats and clamps correctly. What are the key dimensions and geometry to note? Key data: 60° triangular geometry, size 16 mm, thickness 4.76 mm, corner radius 0.8 mm and a cylindrical central hole for positive clamping. What benefits does the T9225 grade and CVD coating provide? The T9225 grade with CVD coating offers a mix of wear resistance and toughness, making the insert resilient in interrupted cuts and variable steel turning tasks while prolonging edge life. Is this insert suitable for interrupted cuts and varying engagement? Yes — the robust grade and geometry are selected for performance under changing engagement and light interruptions, supporting consistent machining and fewer edge failures. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of CVD-coated T9225 and a robust 0.8 mm corner radius to achieve stable cutting in medium to heavy steel turning; the ISO geometry and double-sided chipbreaker reduce downtime and lower cost per edge. Order the TNMG160408 T9225 directly via Metav Werkzeuge or ask our consultants if needed. TNMG160408 T9225 TNMG turning insert, CVD-coated carbide by Tungaloy The TNMG160408 T9225 is an ISO-standard triangular insert designed for external and internal turning, offering a robust universal grade for variable engagement and interrupted cuts. ISO TNMG160408 geometry for standard holders CVD-coated T9225 for medium to heavy steel Double-sided chipbreaker for reliable chip control 0.8 mm corner radius for robust cutting edge Reliable cutting in medium to heavy steel The CVD-coated T9225 grade is engineered as a robust universal solution for turning steel, delivering a balance of toughness and wear resistance that accommodates changing engagement conditions. The chemical vapour deposition layer improves flank wear behaviour and protects the substrate during higher thermal loads, while the carbide substrate ensures edge stability under interrupted cuts. This combination supports consistent component quality and extended edge life, reducing the frequency of insert changes and contributing to predictable production output. Predictable fit and secure clamping for process stability As an ISO-standard insert, compatibility with a clamping system depends on geometry factors such as form, relief angle, tolerance class, attachment type, size and thickness. The triangular shape with a 0° relief angle and a cylindrical central hole allows secure locating in many common TNMG-capable holders and boring bars. The double-sided design offers two usable cutting edges per side, improving economy, while the 60° principal angle and standard dimensions ease replacement and setup, helping to maintain reproducible cutting conditions across batches. Practical benefits: fewer tool changes, higher uptime With a 0.8 mm corner radius and a double-sided chipbreaker, the insert provides a reliable cutting edge and controlled chip formation that supports higher material removal rates without sacrificing surface finish. Typical applications include external profiling and internal turning where variable chip loads occur; the grade’s toughness is suited to slightly interrupted cuts and situations requiring stable chip control. The result is a cost-effective tool solution that delivers process stability and helps maintain throughput in workshop environments. For tailored advice on using the CVD-coated T9225 grade and local availability, contact Metav Werkzeuge for product recommendations and immediate assistance: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 6796049 Manufacturer SKU: TUN6796049 SKU: 6796049-Tungaloy Model series: ISO turning inserts Designation: TNMG160408 T9225 Tungaloy insert Grade: T9225 Material: carbide Facts Insert designation: TNMG160408 Corner radius: 0.8 mm Insert size: 16 mm Thickness: 4.76 mm Relief angle: 0° Central hole: with cylindrical hole Principal angle: 60° Special features CVD-coated hard metal grade T9225 Double-sided chipbreaker Triangular insert form ISO-standard geometry for turning Suitable for external and internal turning Compatibility determined by form, relief angle, tolerance class, attachment, size and thickness FAQ What materials is this insert suitable for? The T9225 grade is intended primarily for steel machining; the CVD coating and carbide substrate make the TNMG160408 suitable for medium to heavy steel turning. Will this insert fit existing TNMG holders? Compatibility depends on holder specifications; the TNMG160408 follows ISO geometry, so fit requires matching form, relief angle, tolerance class, attachment and thickness. How does the double-sided chipbreaker help production? The double-sided chipbreaker provides controlled chip formation and two usable cutting edges per side, improving economy and supporting continuous machining with fewer insert changes. Can this insert handle interrupted cuts? Yes. The robust universal grade and carbide substrate of the TNMG160408 T9225 are designed to tolerate variable engagement and light interruptions while maintaining edge stability. Is the corner radius suitable for finishing? The 0.8 mm corner radius offers a balance between edge strength and surface finish; it is well suited to general turning operations where robustness is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated, wear-resistant carbide grade and a robust universal geometry for stable chip formation and reliable performance in medium to heavy steel turning. Order the TNMG160408 insert through Metav Werkzeuge or ask the consultants for advice on holder compatibility and application setup. TNMG160408 T9225 TNMG turning insert for turning by Tungaloy TNMG160408 is a triangular ISO turning insert designed for medium to heavy steel turning, offering a CVD-coated carbide grade for increased toughness and consistent chip control. CVD-coated carbide T9225 for toughness Triangular 60° geometry for versatile turning Double-sided chipbreaker for consistent chips Cylindrical hole for secure mounting Consistent cutting performance for demanding steel turning The TNMG160408 insert, produced in the T9225 grade, combines a CVD-coated surface with a tough carbide substrate to deliver a balance of wear resistance and fracture toughness. This combination is particularly effective when machining stainless and alloyed steel under varying engagement conditions or when cuts are slightly interrupted. The coated surface reduces flank wear and the substrate resists chipping, which contributes to longer tool life and more stable dimension control in production runs. Emphasis is placed on reliable, repeatable results rather than speculative claims. Clear guidance on compatibility and clamping benefits ISO conformity ensures predictable fit and replacement behaviour: compatibility with a toolholder is defined by form, clearance angle, tolerance class, fastening design, size and thickness. The insert features a 60° triangular shape and a cylindrical hole, enabling secure clamping in standard ISO-compatible holders and bar tooling. The double-sided chipbreaker design assists chip control on both positive and neutral seating angles, and the specified 0° clearance suits particular holder geometries where neutral relief supports stable cutting forces. These characteristics reduce setup uncertainty and simplify integration into existing turning tool systems. Practical application advantages and handling notes Designed as a robust universal grade, this insert is intended for external and internal turning operations where a compromise between durability and toughness is required. The 0.8 mm corner radius provides a balance between edge strength and surface finish, while the 4.76 mm thickness and 16 mm size support rigidity in moderate depth-of-cut scenarios. For optimal results, choose the chipbreaker and grade matching the workpiece material and feed conditions; the T9225 grade is especially suitable when a slightly tougher edge is needed to handle unstable cuts. Regular inspection of the cutting edge and correct clamping torque will preserve the expected performance and consistency. Contact Metav Werkzeuge for tailored application advice, genuine Tungaloy inserts and guidance on holder compatibility — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6780982 SKU: 6780982-Tungaloy Manufacturer SKU: TUN6780982 Manufacturer article number: 6780982 Manufacturer: Tungaloy Facts Shape: triangular Size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included hole: with hole (cylindrical) Included angle: 60° Special features Material: carbide Grade/coating: T9225, CVD-coated Chipbreaker: double-sided Model series: ISO turning inserts Application: turning (external and internal) FAQ Is this insert suitable for interrupted cuts and variable engagement? The Tungaloy TNMG160408 in grade T9225 is specified as a robust universal grade suitable for medium to heavy steel turning and for conditions with changing engagement where higher toughness is required. Which holder types fit the TNMG160408? ISO-compatible triangular holders and bar tooling designed for TNMG inserts with a cylindrical hole accommodate the TNMG160408 when form, clearance, tolerance class, fastening and thickness match the holder specifications. What advantages does the CVD coating provide on this insert? The CVD-coated layer on the carbide substrate reduces flank and crater wear, contributing to longer life and more consistent surface finish during prolonged steel turning operations. How does the double-sided chipbreaker affect performance? The double-sided chipbreaker supports reliable chip formation on both seating faces, improving chip control and repeatability in a range of turning conditions. What dimensions are critical when checking compatibility? Key dimensions include the 16 mm size, 4.76 mm plate thickness, 0.8 mm corner radius and the 60° shape angle; these determine fit and suitability for specific holders and cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a 0.8 mm nose radius and ISO compatibility to maintain productive, repeatable turning operations; order the insert directly via Metav Werkzeuge or contact our consultants for application support. TNMG160408 T9225 TNMG Turning Insert by Tungaloy — CVD-coated carbide, 60° triangular TNMG160408 T9225 is an ISO-format triangular indexable insert for turning, designed for medium to heavy steel machining where toughness and wear resistance are required TNMG160408 T9225 for medium–heavy steel turning CVD-coated carbide for extended edge life 60° triangular geometry with 0.8 mm radius Double-sided chipbreaker, cylindrical hole, 4.76 mm thick High-performance cutting edge for longer tool life The CVD-coated carbide grade T9225 offers a balance of hardness and toughness that supports stable machining under variable cutting conditions. The coating improves wear resistance and reduces flank wear, while the substrate provides the necessary impact strength for slightly interrupted cuts. With a 0.8 mm nose radius and a 60° triangular shape, the insert delivers reliable corner strength for turning operations, helping to extend service intervals and reduce tool changes — a direct contributor to improved process uptime and repeatable part quality. ISO compatibility simplifies tool selection and system integration As an ISO-format insert, this triangular plate fits into a wide range of holders when matched by form, clearance angle, tolerance class, fixing method, size and thickness. The cylindrical hole and standard dimensions (size 16, thickness 4.76 mm) allow straightforward replacement in existing tool systems. The double-sided design means two usable cutting edges per side, improving cost-efficiency per edge. Compatibility notes in the product series emphasise choosing the correct holder geometry and clamp parts to ensure secure seating and consistent cutting performance. Practical advantages for everyday turning tasks Intended primarily for turning, this grade is particularly suitable where changing engagement conditions demand extra toughness. The double-sided chipbreaker supports manageable chip formation across varying feeds and depths, which reduces manual intervention and helps maintain surface finish. For internal and external turning operations on steel, selecting this type of insert with an appropriate chipbreaker and machining parameters will support stable cutting and predictable tool life. For detailed matching to parts, holders or process optimisation, Metav Werkzeuge provides technical advice and data on request; technical enquiries can be sent via email or phone for fast guidance. Contact Metav Werkzeuge today for tailored advice on using the Tungaloy TNMG160408 T9225 insert in specific turning applications — call +49 2822 7131930 or email info@metav-werkzeuge.com for availability and compatibility checks Technical Data Article number: 6944817 Manufacturer SKU: TUN6944817 Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade/coating: T9225 (CVD-coated) Facts Size: 16 Thickness: 4.76 mm Nose radius: 0.8 mm Geometry: 60° Hole: with cylindrical hole Edge form: double-sided chipbreaker Special features ISO-format triangular indexable insert Robust universal grade for medium–heavy steel turning Suitable for external and internal turning Designed for slightly interrupted cuts and variable engagement FAQ What materials is this insert suited for? The TNMG160408 T9225 insert from Tungaloy is designed as a robust universal grade for the medium to heavy machining of steel and performs well where increased toughness is needed. Can this insert be used in existing ISO holders? Yes, the TNMG160408 conforms to ISO dimensions; compatibility depends on matching form, clearance angle, tolerance class, fixing method, size and thickness to the holder. How many cutting edges are available per insert? This triangular insert has a double-sided chipbreaker and offers multiple usable edges; turning centres can benefit from the reversible design to extend edge life. Is the insert suitable for interrupted cuts? The T9225 grade provides additional toughness and is appropriate for slightly interrupted cuts and changing engagement conditions during turning. What is the manufacturer article number and SKU for ordering? Article number 6944817 and manufacturer SKU TUN6944817 identify this Tungaloy TNMG160408 T9225 insert for procurement and stock control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
The CVD‑coated T9225 grade combined with the ISO TNMG160408 geometry delivers robust, repeatable performance for medium to heavy steel turning, while the 0.8 mm corner radius and double‑sided chipbreaker ensure reliable chip control under varying engagement. Order via Metav Werkzeuge or contact the consultants for application guidance. TNMG160408 T9225 – Indexable turning insert, 60° triangle (Tungaloy) The TNMG160408 T9225 is an ISO‑standard indexable turning insert designed for external and internal turning, offering a CVD‑coated carbide grade for robust performance in medium to heavy steel machining. CVD‑coated T9225 universal grade ISO TNMG160408 triangular insert 0.8 mm corner radius for robust edge Double‑sided chipbreaker, with cylindrical hole Consistent performance for medium to heavy steel turning The insert is based on a CVD‑coated carbide grade that balances wear resistance and toughness. As a robust universal grade, it is formulated for medium to heavy steel machining where engagement conditions change or slightly interrupted cuts occur. The coated surface reduces flank wear and extends tool life under thermal stress, while the carbide core preserves edge stability for repeatable component accuracy. Improved chip control and tooling reliability A double‑sided chipbreaker combined with the triangular geometry and a 0.8 mm corner radius promotes predictable chip formation and evacuation during turning operations. This design reduces the risk of built‑up edge and minimises machining interruptions. The 60° insert angle provides a versatile cutting geometry for both profile and finishing passes, contributing to steady cycle times and consistent surface quality. System compatibility and mounting guidance Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The ISO designation connects to a broad range of external holders and boring bars; the insert’s cylindrical hole enables secure clamping and fast, repeatable indexing. Workshops benefit from the standardised format that simplifies spare‑part management within indexable tooling systems. Choosing grade and chipbreaker for the application Select the T9225 grade and corresponding chipbreaker according to workpiece material, depth of cut and machine rigidity. The universal nature of the grade suits a wide material mix, but pairing the insert with an appropriate holder and stable setup will maximise productivity and tool life. When conditions demand higher wear resistance, consider alternative grades or adjusted parameters while retaining the ISO TNMG geometry for compatibility. Contact Metav Werkzeuge for tailored recommendations on Tungaloy TNMG160408 T9225 indexable turning inserts and application support; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6780944 Manufacturer SKU: TUN6780944 SKU: 6780944-Tungaloy Model series: ISO‑Drehwendeschneidplatten Dimensions & core data Insert designation: TNMG160408 Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Insert angle: 60° Clearance angle: 0° Hole: with cylindrical hole Materials & features Material: carbide Coating: CVD‑coated Grade: T9225 (robust universal grade) Geometry: triangular, double‑sided Typical application: external and internal turning Chip control: double‑sided chipbreaker Compatibility: ISO turning insert system, requires matching holder, shim and clamping set FAQ Which materials are suitable for this insert? The TNMG160408 T9225 insert is specified for medium to heavy steel machining; the T9225 grade provides toughness for varying engagement conditions. Is the insert reversible and indexable? Yes, the triangular, double‑sided design allows indexing to fresh cutting edges; the TNMG geometry supports multiple edge positions. What does the CVD coating change in performance? A CVD‑coated surface increases wear resistance and thermal stability on the cutting edge, extending effective tool life under typical turning conditions. How is the insert secured in the toolholder? The insert is supplied with a cylindrical hole for clamping; compatibility requires matching holder form, fastening method and tolerance class. Can this insert be used for internal turning? Yes, the ISO TNMG form and size make the insert suitable for both external and internal turning when paired with an appropriate boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 T9225 Wendeplatten - Tungaloy
TNMG160408 T9225 Drehen – Tungaloy Die TNMG160408 T9225 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für robustes Außen- und Innendrehen in der Stahlbearbeitung CVD-beschichtetes Hartmetall für hohe Standzeit Universalsorte T9225 für mittlere bis schwere Stahl Doppelseitiger Spanbrecher, zylindrisches Loch Eckenradius 0,8 mm für vielseitige Anwendung ISO-Form TNMG kompatibel mit Standardhaltern Robuste Beschichtung für wechselnde Schnittbedingungen Die Platte besteht aus Hartmetall mit CVD-Beschichtung (chemische Gasphasenabscheidung) und der Sorte T9225, wodurch sie speziell für die mittlere bis schwere Stahlbearbeitung ausgelegt ist. Die Kombination aus zäher Schneidstoffmischung und verschleißschützender Beschichtung sorgt für stabile Spanbildung und verbesserte Standzeit beim unterbrochenen Schnitt. Die Konstruktion reduziert Ausfallzeiten und ermöglicht konstante Produktivität bei variierenden Eingriffsbedingungen. Prozesssicherheit und Effizienz beim Drehen Für Außen- und Innendrehen liefert die Platte zuverlässige Ergebnisse: Der doppelseitige Spanbrecher unterstützt kontrollierte Spanabführung, während der Eckenradius 0,8 mm universelle Einsatzmöglichkeiten bietet. Durch die ISO-Normierung sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke klar definiert, was die Werkzeugauswahl und den Einbau in vorhandene Halter vereinfacht. Anwender profitieren von höherer Maschineffizienz und reproduzierbarer Bearbeitungsqualität. Einfache Handhabung, schneller Werkzeugwechsel Die TNMG160408 ist dreieckig und doppelseitig nutzbar, was die Wirtschaftlichkeit erhöht, weil vier Schneiden verfügbar sind. Die Plattendicke von 4,76 mm, die Plattengröße 16 mm und das zylindrische Loch erleichtern das sichere Klemmen im Außenhalter oder in der Bohrstange. Die ISO-Kompatibilität reduziert Rüstzeiten; der Anwender erzielt weniger Maschinenstillstand und niedrigere Stückkosten durch schnellen Tausch und einfache Ersatzteillogistik. Setzen Sie auf die bewährte T9225-Performance von Tungaloy und fordern Sie Ihr Angebot bei Metav Werkzeuge an – per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6781360 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Fakten Eckenradius: 0,8 mm Plattengröße: 16 mm Plattendicke: 4,76 mm Winkel: 60° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: CVD-Beschichtung (chemische Gasphasenabscheidung) Sorte: T9225 Schneidstofftyp: CVD-beschichtetes Hartmetall Spanbrecher: doppelseitig Plattenform: dreieckig Loch: mit Loch Lochstil: zylindrisches Loch FAQ Welche Werkstoffe bearbeitet die TNMG160408 am besten? Die TNMG160408 Tungaloy-Wendeplatte in Sorte T9225 ist für mittlere bis schwere Stahlbearbeitung optimiert und bietet stabile Spanbildung bei wechselnden Schnittbedingungen. Ist die Platte mit gängigen Haltern kompatibel? Ja, die ISO-Form TNMG sowie die Maße (Plattengröße 16 mm, Plattendicke 4,76 mm) gewährleisten Kompatibilität zu Standard-Außenhaltern und Bohrstangen; die Befestigung erfolgt über das zylindrische Loch. Wie wirkt sich die CVD-Beschichtung auf die Standzeit aus? Die CVD-Beschichtung reduziert Verschleiß und verbessert die Standzeit erheblich, besonders bei anspruchsvollen Schnitten und leicht unterbrochenen Bearbeitungen, wie sie mit der T9225-Sorte vorkommen. Kann die TNMG160408 für Innen- und Außendrehen verwendet werden? Ja, die TNMG160408 Tungaloy-Wendeplatte eignet sich sowohl für Außen- als auch für Innendrehen; der doppelseitige Spanbrecher unterstützt kontrollierte Spanabfuhr in beiden Anwendungen. Welche Vorteile bietet der Eckenradius 0,8 mm? Der Eckenradius 0,8 mm bietet eine gute Balance zwischen Schneidstabilität und Schnittkraft, eignet sich für vielseitige Anwendungen und trägt zu einer gleichmäßigen Oberflächengüte bei. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TNMG 160408 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9235 grade and the 60° triangular geometry with a 0.8 mm nose radius to secure consistent machining results in steel, even under unstable or interrupted cutting conditions. Order directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. TNMG 160408 T9235 – Tungaloy turning insert for ISO-standard turning TNMG160408 T9235 is an ISO-standard triangular turning insert designed for external and internal turning in steel, optimised for interrupted cuts and less stable setups CVD-coated carbide grade T9235 60° triangular shape, 16 mm size 0.8 mm nose radius for finish Double-sided chipbreaker, with cylindrical hole Reliable performance for steel turning with controlled wear The insert uses a CVD-coated carbide substrate in grade T9235, selected for its toughness at lower cutting speeds and for operation in unstable setups. This combination yields a stable cutting edge and predictable wear behaviour, which translates into fewer tool changes and better process uptime. The coating improves abrasion resistance while the carbide core absorbs shock loads during interrupted cuts; as a result, the component life is extended and cycle times remain consistent. For users seeking measurable process stability, the insert provides a good balance between wear resistance and edge robustness. Clear compatibility and secure clamping for straightforward mounting As an ISO turning insert, compatibility with holders is governed by form, clearance angle, tolerance class, fixation method, size and thickness. The triangular 60° geometry and the cylindrical hole ensure secure clamping in standard TNMG-compatible holders, while the 4.76 mm plate thickness delivers sufficient rigidity for medium-duty turning. The double-sided chipbreaker allows reversal of the insert, reducing inventory and providing economical reuse of cutting edges. Specifying the correct holder and torque for the clamp secures repeatable positioning and concentricity in the tool system. Practical productivity gains in everyday workshop use The grade and chipbreaker pairing are intended to improve chip control and to perform reliably in interrupted or unstable cuts, making the insert a practical choice for mixed-batch production and repair jobs. The 0.8 mm nose radius supports a good surface finish without sacrificing edge strength, which helps reduce downstream finishing operations. Selecting this insert supports a rational, cost-focused machining strategy: fewer tool changes, predictable edge life and steady component quality. For material-specific optimisation, choose the appropriate chipbreaker and cutting parameters based on workpiece stability and machine rigidity. For reliable steel turning with a robust carbide grade, request the Tungaloy TNMG 160408 T9235 turning insert via Metav Werkzeuge or contact our technical advisors at info@metav-werkezeuge.com / +49 2822 7131930 for tailored process guidance Technical Data Article number: 6785953 SKU: 6785953-Tungaloy Manufacturer article number: TUN6785953 Model series: ISO turning inserts Designation: TNMG160408 T9235 Tungaloy insert Facts Insert size: 16 mm Plate thickness: 4.76 mm Triangle angle: 60° Nose radius: 0.8 mm Clearance angle: 0° Special features Material: carbide Coating: CVD-coated Grade: T9235 Chipbreaker: double-sided Hole: cylindrical through-hole Application: turning (external and internal); suited to steel, interrupted cuts and unstable conditions FAQ What is the primary material recommendation for this insert? The Tungaloy TNMG 160408 T9235 insert is optimised for machining steel; the CVD-coated carbide composition supports toughness in interrupted cuts. Can the insert be used on both external and internal turning operations? Yes, the ISO TNMG geometry and the 60° triangle make the insert suitable for both external and internal turning tasks with appropriate holders. How does the double-sided chipbreaker benefit workshop operations? A double-sided chipbreaker permits indexing of the insert, effectively doubling usable cutting edges and reducing stocking requirements for the turning insert. What clamping features should be checked before mounting? Ensure holder compatibility with TNMG form, the 0° clearance specification, correct clamp torque and that the cylindrical hole aligns with the mating fastener for secure seating. What is the manufacturer SKU for ordering reference? Order reference: Manufacturer article number TUN6785953 or SKU 6785953-Tungaloy for the TNMG160408 T9235 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9235 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade designed for stable cutting under unstable conditions and interrupted cuts; the TNMG160408 delivers reliable edge life and predictable chip control, plus straightforward compatibility checks for ISO holders—order directly via Metav Werkzeuge or consult the technical team for application support. TNMG160408 T9235 indexable turning insert — Tungaloy for turning, CVD-coated carbide, triangular 16 mm TNMG160408 T9235 is a triangular ISO indexable turning insert developed for general external and internal turning where robustness under interrupted cuts and unstable setups is required. CVD-coated carbide T9235 Triangular 16 mm ISO insert Double-sided chipbreaker 0.8 mm corner radius With cylindrical hole for secure clamping Reliable performance for unstable conditions and interrupted cuts The insert is supplied in a triangular ISO format with a 60° included angle and a 0.8 mm corner radius, making it particularly suited to operations where interrupted cuts or machine instability are present. The T9235 grade is a CVD-coated carbide designed to sustain a tougher cutting edge at lower cutting speeds; this means improved resistance to chipping and stable chip formation, which reduces rework and tool changes. The coated substrate also helps maintain a consistent surface finish when machining steel, translating into fewer machine stoppages and more predictable production cycles. Simple holder compatibility and secure clamping reduce setup time Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening, size and thickness; the TNMG160408 uses a cylindrical hole for positive locating and secure clamping in standard ISO holders. The insert’s double-sided chipbreaker provides two usable cutting edges per side, extending indexable life and lowering tooling costs per part. Because the geometry and thickness conform to ISO norms, integration into existing tool systems is straightforward—holders, shim and screw sets common to ISO inserts can be used without special adaptations, reducing changeover time and simplifying inventory. Grade and chipbreaker selection for productivity and surface quality Selecting T9235 with its CVD layer is an intentional choice for tougher cutting tasks on steel where lower cutting speeds and intermittent cuts are expected; the result is improved edge robustness and repeatable performance. The double-sided chipbreaker supports chip control across a range of depths of cut, helping to avoid built-up edge and improving surface finish consistency. For operators seeking enhanced process reliability, the combination of geometry, grade and chipbreaker offers a balance of tool life and workpiece quality—optimised for productive turning rather than maximum speed. Contact Metav Werkzeuge for customised application advice or to request original Tungaloy TNMG160408 T9235 indexable inserts; technical consultants are available by email or phone to verify holder compatibility and recommended cutting parameters Technical data Article number: 6785894 SKU: 6785894-Tungaloy Manufacturer SKU: TUN6785894 Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Special features ISO designation TNMG160408 CVD-coated carbide grade T9235 Triangular plate, double-sided chipbreaker Cylindrical hole for clamping Intended application: turning on steel and unstable conditions FAQ What materials is this insert suitable for? The TNMG160408 T9235 insert is designed primarily for machining steel and performs well under interrupted cutting conditions thanks to its tough CVD-coated carbide grade. How does the chipbreaker affect productivity? The double-sided chipbreaker on the TNMG160408 improves chip control and repeatability, which helps maintain surface quality and reduces tool-change frequency. Is this insert compatible with standard ISO holders? Compatibility is ensured by matching form, clearance angle, tolerance class, fastening, size and thickness; the TNMG160408’s ISO geometry and cylindrical hole allow secure clamping in standard ISO toolholders. How many cutting edges are available per insert? The triangular TNMG insert offers multiple usable edges due to its double-sided design; flipping and indexing extend the effective life before disposal. Can this grade handle interrupted cuts or unstable setups? Yes — the T9235 grade is specifically formulated for tougher conditions, delivering stable edge life in interrupted cuts and less stable setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9235 Wendeplatten - Tungaloy
The combination of CVD-coated carbide and a 0.8 mm corner radius delivers dependable edge strength and consistent performance in interrupted or unstable turning operations; compatibility with ISO TNMG holders ensures straightforward integration into existing tool systems. Order the TNMG160408 T9235 insert via Metav Werkzeuge or contact the sales team for application advice. TNMG 160408 T9235 ISO turning insert — CVD-coated carbide, 0.8 mm corner radius (Tungaloy) A TNMG160408 T9235 triangular indexable insert engineered for external and internal turning of steel, offering a tough CVD-coated carbide grade for interrupted cuts and less stable machining conditions. CVD-coated carbide for tough steel applications 0.8 mm corner radius for reliable edge strength ISO TNMG 160408 format with cylindrical hole Consistent performance where interrupted cuts occur The CVD-coated carbide grade T9235 is formulated for steel machining at moderate cutting speeds and where stability is limited. Its combination of substrate and coating enhances resistance to chipping during impact events, so the insert maintains a usable cutting edge longer under interrupted or unstable conditions. The 0.8 mm corner radius increases edge robustness and contributes to predictable tool life, while the double-sided design extends usage by allowing indexation of both cutting edges. These characteristics make the insert particularly suitable for workshop and production environments where part interruptions or variable clamping stability are common. Seamless integration into ISO turning systems Compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; the ISO designation and format facilitate selection of a matching holder or boring bar. The triangular TNMG160408 geometry with a 60° included angle and a cylindrical hole is widely supported across external holders and boring systems, simplifying tool assembly. The plate thickness of 4.76 mm and the 16 mm inscribed circle size align with standard TNMG tool families, enabling fast replacement and minimal setup time. Where process reliability is vital, matching the insert to an appropriate holder and clamp ensures repeatable seat and consistent cutting positions. Practical benefits for productivity and process stability Using a grade targeted at tougher steels and intermittent cuts reduces unscheduled downtime from edge failure and lowers the frequency of tool changes. The double-sided chipbreaker geometry offers two usable cutting edges per side, improving cost efficiency per insert. Additionally, the CVD coating supports thermal resistance and maintains a stable cutting edge under fluctuating temperatures, contributing to surface finish consistency and predictable component tolerances. For production managers and process engineers, these attributes translate into measurable throughput and fewer scrap parts when machining challenging steel batches. Selection guidance and application notes When selecting an insert for a turning operation, priority should be given to matching the grade and chipbreaker to the material and cutting conditions. The T9235 grade is recommended where lower cutting speeds and interrupted cuts are expected; for steady high-speed finishing a different grade would be more appropriate. Attention to clamping and holder rigidity remains critical: the insert delivers best results when mounted in a correctly specified TNMG-compatible holder and when machine-tool rigidity supports the intended cut. The system concept—insert, holder, shim and clamping set—should be considered holistically to exploit the insert’s full potential. For application recommendations or to source the Tungaloy TNMG160408 T9235 insert, contact Metav Werkzeuge for detailed guidance and availability; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and ordering assistance. Technical data Article number: 6785997 SKU: 6785997-Tungaloy Manufacturer SKU: TUN6785997 Model series: ISO turning indexable inserts Material: Carbide Grade/coating: T9235 (CVD-coated carbide) Facts Inscribed circle / size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Special features Triangular insert geometry Cylindrical hole Double-sided chipbreaker ISO TNMG160408 format Intended application: external and internal turning Suitable for machining steel Two usable cutting edges per side FAQ What materials is this insert best suited for? The T9235 grade is optimised for machining steel, especially where interrupted cuts or lower cutting speeds are expected; the insert is specified as a turning insert for steel applications. How does the TNMG160408 format affect holder selection? Holder compatibility depends on the TNMG form, clearance angle, tolerance and clamping; select a TNMG-compatible external holder or boring bar matching the TNMG160408 geometry and the 4.76 mm thickness. Is the insert indexable on both sides? Yes, the triangular TNMG design is double-sided, providing multiple usable edges and enabling indexation to extend service life. What role does the 0.8 mm corner radius play? The 0.8 mm corner radius increases edge strength and reduces susceptibility to chipping during interrupted cuts, improving process reliability in roughing or unstable clamping situations. Does the T9235 grade require special cutting speeds? T9235 is intended for lower to moderate cutting speeds in steel; choose speeds and feeds consistent with the grade recommendation and the rigidity of the machine-holding system to balance tool life and productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9235 Wendeplatten - Tungaloy
Take advantage of robust chip formation and the CVD-coated T9235 grade for consistent performance in unstable setups and interrupted cuts; the combination of reliable material compatibility and ISO conformity supports efficient turning operations. Order the insert directly via Metav Werkzeuge or consult the advisors for application-specific guidance. TNMG 160408 T9235 indexable turning insert for turning — Tungaloy A TNMG160408 T9235 triangular indexable insert designed for external and internal turning on steel, optimised for interrupted cuts and less rigid machining conditions CVD-coated carbide grade T9235 Triangular ISO TNMG form Double-sided chipbreaker Compatible with standard ISO holders High-performance cutting grade for stable metal removal The combination of a CVD-coated surface and the T9235 designation delivers a wear-resistant cutting edge formulated for steel applications where cutting speeds are moderate and conditions fluctuate. As an indexable insert the component provides predictable tool life and consistent geometry over multiple indexings, while the turning-focused design helps maintain surface quality when machining under interrupted or unstable conditions. The carbide substrate supports thermal stability and contributes to secure chip control, reducing secondary finishing and downtime. ISO conformity and mechanical compatibility for easy integration Designed as an ISO TNMG form with a 60° included angle and a 0° clearance, the insert fits widely used external holders when the correct form, tolerance class and fastening arrangements are observed. The plate size is 16 mm with a thickness of 4.76 mm and a nose radius of 0.8 mm, supplied with a cylindrical hole for secure clamping. Selection of the matching holder, shim or clamp and replacement screws completes the system; the geometry and double-sided chipbreaker require a holder that supports the specified orientation to ensure repeatable performance. Productivity gains through consistent chip behaviour and adaptability A well-matched chipbreaker and robust grade reduce vibration transfer and maintain cutting edge integrity in less rigid set-ups, resulting in fewer rejects and longer periods between indexings. For workshops facing interrupted cuts or variable clamping stiffness, the insert offers an economical route to stable machining without high-speed parameters. The triangular layout provides two usable cutting edges per side, enhancing overall productivity while simplifying inventory management for turning operations. Contact Metav Werkzeuge for tailored application advice or to request the TNMG160408 T9235 turning insert; Metav Werkzeuge can provide specification support and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6785839-Tungaloy Manufacturer article number: 6785839 Manufacturer SKU: TUN6785839 Model series: ISO-Drehwendeschneidplatten Facts Size: 16 mm Thickness: 4.76 mm Nose radius: 0.8 mm Included angle: 60° Clearance angle: 0° Special features CVD-coated carbide grade T9235 Triangular plate form Double-sided chipbreaker Cylindrical hole For turning Suitable for steel Compatible with ISO holders, shims and screws FAQ What materials is this insert best suited for? The TNMG160408 T9235 insert is optimised for machining steel; the CVD-coated grade T9235 is formulated for robust performance at moderate cutting speeds and unstable conditions. Can the insert be used for interrupted cuts? Yes. The Tungaloy T9235 grade and the double-sided chipbreaker make the insert suitable for interrupted cutting where edge stability and chip control are required. Which holders are compatible with this triangular insert? Compatibility depends on holder form, clearance, tolerance class, fastening and size; the ISO TNMG geometry of this insert matches standard TNMG external holders when those parameters align. How many cutting edges are available per insert? The triangular shape provides multiple indexable edges; the TNMG160408 design allows rotation to fresh edges to extend usable service life. Is a specific clamping arrangement required because of the hole style? The insert features a cylindrical hole for secure clamping; use the appropriate shim or clamp and replacement screws specified for the selected ISO holder to ensure repeatable seating and stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9235 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide toughness, a triangle 16 mm form and a double-sided chipbreaker for reliable turning performance; order directly via Metav Werkzeuge or ask our consultants if needed. TNMG160408 T9235 TNMG indexable insert for turning — CVD-coated carbide, 0.8 mm radius (Tungaloy) The TNMG160408 T9235 is an ISO-standard triangular indexable insert engineered for turning operations, designed to handle steel machining where toughness and interrupted cuts are common. CVD-coated carbide for enhanced toughness Triangle 16 mm plate with 60° included angle 0.8 mm corner radius, 4.76 mm thickness Double-sided chipbreaker with cylindrical hole Durability and cutting reliability for unstable conditions The T9235 grade is a CVD-coated carbide developed to deliver toughness during lower cutting speeds and in less stable setups. The coating enhances resistance to flank wear while the substrate provides a robust fracture-resistant cutting edge, which reduces unscheduled tool changes. For shops facing interrupted cuts or variable clamping stiffness, this combination gives a predictable tool life and helps maintain part quality even when the process cannot be fully stabilised. The 0.8 mm corner radius supports edge strength for heavier engagement, balancing edge life and finish. Predictable fitment and simple toolholder integration Supplied in the ISO TNMG160408 format, the insert matches existing ISO-compatibility criteria — form, clearance, tolerance class, fastening and thickness all determine correct seating in the holder. The cylindrical hole and standard 60° triangle form ensure secure clamping and repeatable positioning across compatible external holders or boring bars. Clear mechanical compatibility reduces setup time and minimises indexing errors, which in turn improves process uptime and reproducibility on the shop floor. Cost-effective productivity through indexable design A triangular insert offers three usable cutting edges, and the double-sided chipbreaker extends effective edge life by providing two functional faces per index. Re-indexing rather than regrinding saves both time and expense, improving the cost-per-part metric. With a 4.76 mm plate thickness and a 16 mm inscribed circle, the insert provides structural rigidity that supports stable chip formation and surface finish under the recommended cutting regimes. For manufacturing teams seeking a balance of life, reliability and easy edge restoration, this indexable solution is optimised for productive turning of steel. For specific application advice or to reserve stock of the TNMG160408 T9235 from Tungaloy, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785842 Manufacturer SKU: TUN6785842 Model series: ISO turning indexable inserts Label: TNMG160408 T9235 Tungaloy-indexable insert Facts Inscribed circle / size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Special features Material: carbide Coating: CVD Grade: T9235 (tough grade for steel) Chipbreaker: double-sided Hole style: with cylindrical hole Plate form: triangular Typical application: external and internal turning FAQ What materials is this insert suitable for? The TNMG160408 T9235 insert is specified for machining steel, with the T9235 grade optimised for tougher, interrupted cuts at moderate cutting speeds. How does the CVD coating benefit machining performance? The CVD-coated carbide layer increases resistance to abrasive wear and helps maintain flank integrity, which results in longer effective cutting life and more consistent surface finish with the TNMG160408 T9235 insert. Can this insert be used in existing ISO TNMG holders? Yes, the insert follows ISO TNMG dimensions and secures via a cylindrical hole; compatibility depends on holder form, clearance, tolerance and fastening, so confirm those parameters before fitment. How many cutting edges are available per insert? Thanks to the triangular shape and double-sided chipbreaker, the insert offers multiple usable edges through indexing, improving cost efficiency per edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade for robust cutting, a 0.8 mm corner radius and a stable triangular geometry for consistent performance in interrupted and unstable turning operations; order the insert directly via Metav Werkzeuge or consult the team for application advice. TNMG160408 T9235 Turning insert by Tungaloy — CVD-coated carbide, 60° triangular form The TNMG160408 T9235 is an ISO-format triangular insert for external and internal turning, designed to deliver reliable performance on steel where interrupted cuts or unstable setups occur. CVD-coated carbide grade T9235 Suited to steel and interrupted cuts ISO TNMG 160408 triangular insert 0.8 mm corner radius, 60° insert angle Reliable cutting under unstable conditions The insert provides robust performance where fixture rigidity or interrupted cuts challenge process stability. The CVD-coated surface on the carbide substrate improves wear resistance and helps maintain a stable cutting edge during variable engagement. With a 60° triangular geometry and 0.8 mm corner radius, the component balances edge strength and versatility: it resists chipping better than finer radii while preserving access to smaller profiles. This makes the part well suited for workshops needing dependable results when clamping or workpiece support cannot be fully optimised. Longer effective tool life and consistent surface quality Choosing the T9235 grade brings a combination of toughness and thermal resistance tailored for steel machining at moderate speeds. The grade is formulated to withstand shock and generate predictable wear behaviour, which can reduce tool change frequency and improve process economics. The double-sided chipbreaker design allows reversing the insert to use the second cutting edge, effectively doubling usable life per index. As a result, operational interruptions are reduced and finish consistency on turned components is improved, especially where surface integrity is critical. Compatibility, mounting and application guidance Compatibility with holders depends on form, relief angle, tolerance class, clamping and plate thickness; the insert has a 4.76 mm plate thickness and is supplied with a cylindrical hole for secure mounting. The ISO classification clarifies fitment: ISO TNMG 160408 indicates the size and shape standard, which helps shops select the correct external holder or boring bar. The relief angle is 0°, suitable for many conventional turning holders. When selecting a holder, ensure matching pocket geometry and clamping hardware to keep the insert stable during cuts. How to select the right chipbreaker and cutting strategy The double-sided chipbreaker supplied on this triangular insert offers a balance between chip control and cutting forces. For heavily interrupted or unstable conditions, a tougher grade like T9235 combined with conservative cutting data reduces the risk of edge failure. For finishing passes, consider a reduced depth of cut and slightly higher spindle speed while maintaining consistent feed to enhance surface finish. The insert’s triangular shape provides three indexing positions per side, offering good cost-efficiency for batch work and general-purpose turning tasks. For application-specific recommendations on using the Tungaloy TNMG160408 T9235 insert and to arrange prompt supply via Metav Werkzeuge, contact Metav Werkzeuge for expert assistance and rapid delivery. Technical data Article number: 6785798 SKU: 6785798-Tungaloy Manufacturer SKU: TUN6785798 Model series: ISO-Drehwendeschneidplatten Designation: TNMG160408 T9235 Tungaloy-Wendeplatte Facts Corner radius: 0.8 mm Insert angle: 60° Plate thickness: 4.76 mm Plate size: 16 mm Special features Material: carbide Coating: CVD-coated Grade: T9235 Plate form: triangular Hole: with cylindrical hole Chipbreaker: double-sided Relief angle: 0° Typical application: external and internal turning FAQ What materials is this insert designed to machine? The TNMG160408 T9235 insert is designed primarily for steel machining; the T9235 grade is a tough CVD-coated carbide optimised for interrupted cuts and unstable conditions when turning steel. How is holder compatibility determined for this insert? Compatibility depends on form, relief angle, tolerance class, clamping method, plate size and thickness; the ISO TNMG 160408 designation and the 4.76 mm plate thickness guide the selection of a matching external holder or boring bar. Can the insert be indexed to extend usable life? Yes — the triangular geometry and double-sided chipbreaker permit multiple indexing positions, allowing reversal and rotation to access fresh cutting edges. What does the 0.8 mm corner radius mean for machining? A 0.8 mm corner radius offers increased edge strength versus finer radii, improving resistance to chipping in interrupted operations while still allowing acceptable detail in turned profiles. Is the insert suitable for finishing passes? The insert can be used for finishing with appropriate cutting data adjustments; a stable setup, reduced depth of cut and consistent feed will enhance surface finish when using this CVD-coated carbide grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9235 Wendeplatten - Tungaloy
High-quality CVD-coated carbide in grade T9235 paired with the ISO TNMG 160408 geometry delivers robust performance for steel turning under interrupted or unstable conditions; the triangular 16 mm form with a 0.8 mm corner radius and cylindrical hole gives secure clamping and repeatable positioning. Order the insert directly via Metav Werkzeuge or consult Metav's specialists for application-specific selection. TNMG 160408 T9235 – ISO TNMG turning insert for steel by Tungaloy The TNMG 160408 T9235 is an ISO triangular indexable turning insert designed for external and internal turning of steel, engineered for interrupted cuts and unstable machining conditions. CVD-coated carbide grade T9235 Triangular 16 mm ISO TNMG form 0.8 mm corner radius for robust edge Cylindrical hole for secure clamping Precision and wear resistance for demanding steel turning The insert combines a CVD-coated surface with a tough carbide substrate, delivering a balance between wear resistance and edge stability. The T9235 grade is formulated for lower cutting speeds and situations where cuts are interrupted or the setup lacks rigidity; this increases tool life in unstable conditions while maintaining consistent cutting behaviour. Such a coating reduces flank wear and supports extended tool life, which in turn contributes to fewer tool changes and more predictable production cycles. This paragraph focuses on measurable performance improvements rather than vague claims. Secure mounting and ISO compatibility for repeatable setups Designed to the ISO TNMG 160408 specification, the triangular insert features a 16 mm major size and a plate thickness of 4.76 mm, with a 0° relief angle and a 60° included angle, ensuring compatibility with standard TNMG holders. The cylindrical hole enables positive clamping and accurate repeatability in indexable toolholders; compatibility is determined by holder form, relief angle, tolerance class, fastening method, size and thickness. Clear matching of insert geometry to holder design reduces vibration and improves surface finish, making setup and interchange straightforward in controlled workshop environments. Practical benefits: chip control, edge life and production stability A double-sided chipbreaker provides controllable chip flow for many turning tasks, helping to avoid chip entanglement and supporting safer, more efficient machining. The triangular form offers multiple usable edges per insert, improving cost-effectiveness through edge indexing and reducing downtime for tool changes. In the context of process planning, the combination of T9235 grade and chipbreaker selection allows processors to prioritise either edge robustness or surface finish depending on the operation, enabling a targeted approach to cycle-time optimisation and predictable output quality. For assured machining performance with Tungaloy’s CVD-coated grade T9235, contact Metav Werkzeuge for tailored application advice and to secure the TNMG 160408 insert through Metav’s sales team at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6785895 Manufacturer SKU: TUN6785895 SKU: 6785895-Tungaloy Facts ISO designation: 160408 Plate size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Included angle: 60° Special features Material: CVD-coated carbide Grade: T9235 Plate form: triangular Chipbreaker: double-sided Hole: with cylindrical hole Application: turning (external and internal) Compatibility: ISO holders by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The TNMG 160408 T9235 insert is intended primarily for steel machining; the T9235 grade is formulated to perform well at lower cutting speeds and under interrupted cutting conditions. Which ISO form and size does the insert follow? The insert follows the ISO TNMG 160408 form with a 16 mm plate size and 4.76 mm thickness, providing a standardised geometry for compatible TNMG holders. How is the insert clamped in the holder? Clamping is accomplished via the cylindrical hole and standard TNMG clamping systems; secure clamping and repeatable seating are achieved when holder form, relief angle and tolerance match the insert. What advantages does the T9235 grade offer? Grade T9235 offers a tough substrate with a CVD coating that enhances edge stability and wear resistance, particularly beneficial for interrupted cuts and less stable machining set-ups. How many cutting edges are available per insert? The triangular TNMG geometry provides multiple indexable edges per insert; the double-sided design increases usable edges and supports cost-effective edge indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9235 Wendeplatten - Tungaloy
Benefit from robust CVD-coated carbide performance and ISO compatibility for uninterrupted production. The combination of the T9235 grade, reliable chip control in interrupted turning and standardised geometry ensures predictable tool life and simplified inventory management. Order the TNMG160408 T9235 turning insert directly via Metav Werkzeuge or consult our specialists for application advice. TNMG160408 T9235 — Tungaloy TNMG turning insert, CVD-coated carbide, 60° triangle TNMG160408 T9235 is an ISO-designated turning insert engineered for external and internal turning in steel, optimised for unstable cutting conditions CVD-coated carbide grade T9235 For steel and interrupted cuts ISO TNMG 160408 triangular form Double-sided chipbreaker with hole Consistent chip control for interrupted turning The TNMG160408 T9235 insert is designed to deliver stable chip formation under interrupted or unstable cutting conditions. The CVD coating increases wear resistance at the cutting edge while the underlying carbide substrate provides toughness, so the insert resists chipping during heavier interruptions. This combination translates into fewer unexpected tool changes and more consistent part quality, which supports higher process reliability and less rework. ISO compatibility simplifies tooling logistics and set-up Standardised designation and geometry reduce uncertainty in toolholder selection. The ISO TNMG160408 form with a 60° cutting edge, 0° clearance and 4.76 mm thickness fits a wide range of standard external holders; the presence of a cylindrical mounting hole aids secure clamping. The corner radius 0.8 mm offers a balance between edge strength and surface finish. As a result, workshop organisation is streamlined, setup times are shorter and spare-part management becomes more efficient. Match grade and chipbreaker to secure process stability The T9235 grade is a tougher, CVD-coated option intended for steel machining at lower cutting speeds where intermittent cuts or vibration are present. The double-sided chipbreaker gives flexibility for turning strategies and can help control chip form in medium to roughing operations. Choosing the correct chipbreaker and grade reduces the risk of built-up edge and premature wear, leading to longer in-service life and predictable component tolerances — qualities that contribute to both operational confidence and cost-efficient production. For demanding steel turning applications select the Tungaloy T9235 grade and contact Metav Werkzeuge for tailored recommendations and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6785843 Manufacturer SKU: TUN6785843 Product label: TNMG160408 T9235 Tungaloy insert Manufacturer: Tungaloy Core specifications ISO designation: 160408 Insert designation: TNMG160408 Cutting angle: 60° Thickness: 4.76 mm Insert size: 16 mm Corner radius: 0.8 mm Clearance angle: 0° Hole: cylindrical hole Materials & features Material: carbide Coating: CVD Grade: T9235 Shape: triangular Chipbreaker: double-sided Application: turning Mounting compatibility: determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? This insert with T9235 grade and CVD coating is optimised for machining steel and performs well under interrupted cutting typical in steel turning. Is the TNMG160408 compatible with standard ISO holders? Yes, the TNMG160408 designation indicates ISO compatibility; compatibility depends on holder form, tolerance class, fastening and size. What benefit does the double-sided chipbreaker provide? The double-sided chipbreaker on this Tungaloy insert allows switching between cutting edges and helps control chip form in medium to roughing turning operations. How does the CVD coating affect tool life? The CVD coating on the T9235 grade increases wear resistance and supports edge integrity during lower-speed, interrupted cuts, extending in-service life for the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9235 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade optimised for steel, a 0.8 mm corner radius for reliable feed stability and a triangular, double-sided geometry that supports flexible indexing and productive turning operations. Order directly via Metav Werkzeuge or consult our specialists for application-specific setup. TNMG 160408 T9235 – ISO turning insert by Tungaloy for general turning The TNMG160408 T9235 is an ISO triangular turning insert intended for external and internal turning in steel; designed to perform under interrupted cuts and less stable machining conditions. *TNMG 160408 geometry for ISO turning *CVD-coated carbide grade T9235 *0.8 mm corner radius for stable feeds *Double-sided chipbreaker, triangular form Stable cutting performance for challenging steel work The CVD-coated carbide grade T9235 provides a balance between toughness and wear resistance that is especially suited to machining steel at moderate cutting speeds or where conditions are unstable. This grade is formulated to withstand intermittent cuts and variable chip loads, so the operator can expect reduced edge chipping and steadier tool life. The triangular plate geometry contributes to consistent cutting behaviour and predictable tool-change intervals, supporting a smooth production flow without frequent interruptions. Coating and substrate: what the combination means in practice A CVD-coated hardmetal substrate gives the insert enhanced resistance to abrasive wear while retaining core toughness. In practice, this means longer edge life when compared with uncoated grades in equivalent conditions and improved reliability where small changes in cutting engagement occur. The coating system reduces flank wear and helps maintain surface finish across batches, so operators can depend on repeatable results rather than frequent process adjustments. Designed for straightforward integration into ISO tool systems Compatibility with toolholders depends on parameters such as form, clearance, tolerance class, fastening method, size and thickness. The TNMG 160408 T9235 sits within the ISO-standard family and is compatible with matching triangular holders, backing pads and standard clamping sets; replacement screws and shims are part of the typical system build. Confirming seat geometry and tolerance class on the holder ensures correct fitment and clamping force, which in turn preserves cutting-edge stability and repeatability in production. Practical benefits: productivity, handling and application focus The insert’s 0.8 mm corner radius supports stable feed rates and contributes to improved surface integrity on turned parts. The double-sided chipbreaker provides flexibility in indexing and helps control chip form in common turning tasks. Together, these features help reduce downtime and simplify tool management in busy workshops, delivering both economic and operational advantages. For steel turning where interrupted cuts occur, choosing the appropriate chipbreaker and the T9235 grade will pay off in fewer edge failures and more consistent cycle times. For application advice on the T9235 grade or to check availability of this Tungaloy ISO turning insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 – our specialists will recommend the optimal holder and clamping setup for the intended job. Technical data Article number: 6785952 SKU: 6785952-Tungaloy Manufacturer SKU: TUN6785952 Model series: ISO turning indexable inserts Core specifications Designation: TNMG160408 Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Wedge angle: 60° Hole style: cylindrical hole Materials & features Substrate material: carbide Coating: CVD-coated Grade: T9235 Plate form: triangular Chipbreaker: double-sided Application: turning FAQ What is the primary application for this insert? The TNMG160408 T9235 insert (SKU 6785952-Tungaloy) is intended for external and internal turning, particularly in steel applications with interrupted cuts or unstable conditions. Which materials is the T9235 grade best suited to? The T9235 grade is a tough CVD-coated carbide developed for machining steel at lower cutting speeds and in circumstances where cut stability is limited. How is compatibility with a holder checked? Compatibility depends on the insert’s form, clearance, tolerance class, fastening, size and thickness; ensure the holder matches the TNMG160408 seat geometry and clamping style. Does the insert offer good chip control? Yes, the double-sided chipbreaker on this triangular insert aids chip formation and evacuation in typical turning operations, improving process stability. Can this insert be used for heavy interrupted cuts? The T9235 grade is formulated for tougher conditions and interrupted cuts; for very aggressive heavy interrupted workpieces, refer to specific cutting parameters and holder rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9235 for reliable chip control and the double-sided chipbreaker for improved performance in unstable or interrupted turning operations; compatibility with ISO tooling ensures fast replacement and predictable process results. Order directly via Metav Werkzeuge or consult our specialists for the optimal holder and cutting data. TNMG 160408 T9235 turning insert — Tungaloy indexable insert for turning The TNMG160408 T9235 is an ISO‑standard indexable insert designed for general turning, offering a robust carbide grade for steel under unstable conditions and interrupted cuts. CVD-coated carbide grade T9235 Robust in interrupted and unstable cuts ISO‑standard TNMG 160408 form Double-sided chipbreaker and cylindrical hole Stable cutting in challenging turning operations The CVD-coated carbide grade T9235 delivers a balance of toughness and wear resistance, making this insert especially suited to turning operations in steel where speeds are moderate and conditions may be unstable. The coating enhances edge security and reduces crater wear, which preserves dimensional accuracy and extends tool life. Choosing a tougher grade reduces the risk of premature chipping during interrupted cuts, so machining continuity and productivity are maintained even when the cut is not constant. Fast fit and predictable tool changeover in ISO systems Designed as an ISO-standard insert, the geometry and dimensions follow established norms so compatibility with a matching holder depends on form, clearance angle, tolerance class, mounting and thickness. The triangular plate form with a cylindrical hole and defined clearance angle of 0° simplifies mechanical seating and repeatable positioning. This standardisation reduces setup time, lowers inventory complexity and helps maintain stable process parameters across production batches. Geometry tuned for surface quality and process stability A 0.8 mm corner radius and included angle of 60° give a compromise between strength and cutting edge sharpness: larger radii improve edge robustness and contribute to tool life, while controlled geometry supports consistent surface finish. The double-sided chipbreaker helps segment and curl chips, improving evacuation and reducing the likelihood of entanglement in unstable conditions. With a plate thickness of 4.76 mm, the insert provides the stiffness required for medium‑duty turning while remaining easy to index and replace. Application guidance and material suitability Optimised for turning, this insert performs best in steel applications at reduced cutting speeds or where interrupted cuts occur. Select the chipbreaker style and holder rigidity to match the workpiece material and machine stability: the right combination yields improved cycle times and lower overall tooling costs. If uncertainty remains about suitability or cutting data, technical advice is available — Metav Werkzeuge can provide tailored recommendations and supplementary machining parameters to align the insert’s strengths with the application. Contact Metav Werkzeuge to discuss the TNMG 160408 T9235 grade and arrange supply or tailored cutting-data recommendations for your turning process Technical Data Manufacturer article number: 6785998 SKU: 6785998-Tungaloy Manufacturer SKU: TUN6785998 Name: TNMG160408 T9235 Tungaloy indexable insert Material: carbide Series: ISO turning indexable inserts Manufacturer: Tungaloy Data Inscribed circle: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 60° Hole: with cylindrical hole Special features CVD-coated carbide grade T9235 Double-sided chipbreaker Triangle plate form ISO-standard TNMG 160408 designation Suited for turning in steel under unstable or interrupted cutting Compatibility depends on holder form, mounting and tolerance class FAQ What materials is this insert suitable for? The TNMG160408 T9235 insert is formulated for machining steel, especially where a tough grade is required for interrupted or unstable cuts. How does the chipbreaker help in turning operations? The double-sided chipbreaker on this insert controls chip form and evacuation, which improves surface finish and reduces the risk of chip-related interruptions during turning. Which dimensions define fitment to a holder? Fitment depends on the insert’s form, inscribed circle (16 mm), thickness (4.76 mm), hole style (cylindrical hole) and clearance angle (0°); these parameters determine compatibility with ISO holders. Is this an indexable insert suitable for ISO tooling systems? Yes, the TNMG160408 follows ISO norms for turning inserts, enabling predictable indexing and straightforward replacement in compliant holders. Where can cutting-data advice and supply be obtained? Technical recommendations and supply can be arranged through Metav Werkzeuge; contact their consultants for cutting parameters matched to the Tungaloy TNMG160408 T9235. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 160408 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of low cutting forces from the TH10 grade, the 60° TNMG geometry and the 0.8 mm corner radius for consistent surface quality and economical turning. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. TNMG160408 TH10 – TNMG 160408 TH10 indexable insert for turning, Tungaloy TNMG160408 TH10 is an ISO-standard indexable insert designed for turning applications, especially where low cutting forces and clean surface finish are required. 60° TNMG trigon geometry Uncoated carbide grade TH10 Double-sided chipbreaker design 0.8 mm corner radius for fine finishes Consistent surface quality with reduced cutting forces The combination of the uncoated carbide cutting edge and the TH10 grade delivers noticeably lower cutting forces for non-ferrous materials, which helps to achieve a smoother finish and reduced tool load. The insert’s 0.8 mm corner radius supports fine finishing passes without excessive cutting pressure. For users unfamiliar with grade nomenclature: TH10 denotes a sharp, universal carbide grade optimised for materials where an uncoated edge promotes cleaner shearing and improved surface appearance. This results in stable machining and fewer rework cycles. Secure fit and fast indexability for productive workshops Designed to the ISO-standard, the trigon geometry with a 60° angle ensures compatibility with a wide range of ISO turning toolholders when the holder matches the shape, relief angle (0°), tolerance class, fastening method, size and thickness. The triangular plate form and the presence of a cylindrical hole facilitate quick and repeatable indexing, enabling rapid corner changes and minimal downtime. For production environments that value predictable cycle times, the predictable locating of the insert supports consistent results across shifts. Material choice that prioritises clean chips and reliability The uncoated carbide composition of this insert is intended for applications on non-ferrous workpieces where low friction and chip control are key. The double-sided chipbreaker geometry helps to segment chips reliably, reducing the risk of long, entangling swarf and improving process security. As a result, operators can expect a balance between productive material removal and manageable chip shapes, which is particularly advantageous in mixed-production shops processing aluminium, brass and similar alloys. System readiness and economical replacement strategy With a nominal thickness of 4.76 mm and an inscribed circle size of 16 mm, the insert integrates into standard ISO turning systems together with a matching holder, shim/clip and replacement screws. The double-sided design effectively doubles the number of usable edges compared with single-sided alternatives, supporting an economical approach to tool life management. Spare-part planning is simplified by the standardised geometry, and the clear ISO designation accelerates procurement and inventory control. For application-specific guidance on Tungaloy inserts or to arrange supply through Metav Werkzeuge, please contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808429 Manufacturer SKU: TUN6808429 Item name: TNMG160408 TH10 Tungaloy indexable insert Material: Carbide Grade/coating: TH10 (uncoated) Facts Inscribed circle / size: 16 mm Corner radius: 0.8 mm Thickness: 4.76 mm Angle: 60° Hole: cylindrical hole Special features Triangular insert, double-sided chipbreaker Uncoated carbide cutting edge ISO turning insert series compatibility Suitable for external and internal turning FAQ What materials is this insert best suited for? The TNMG160408 TH10 Tungaloy indexable insert (SKU: 6808429-Tungaloy) is optimised for non-ferrous materials and applications where an uncoated edge supports low cutting forces and clean surface finishes. How many usable cutting edges does the insert provide? A triangular, double-sided configuration provides six usable cutting edges on the TNMG160408 TH10 Tungaloy indexable insert, allowing for economical edge rotation and extended service life. Will this insert fit existing ISO holders? Compatibility depends on holder form, relief angle (0°), tolerance class, fastening, size and thickness; when all match the ISO specification, the TNMG160408 TH10 fits ISO-standard turning holders designed for TNMG geometry. What surface finish can be expected with this grade? The TH10 grade and the 0.8 mm corner radius promote lower cutting forces and a cleaner shearing action, which typically results in improved surface finish compared with harsher or coated grades in similar conditions. Is the insert suitable for internal turning operations? Yes, the TNMG160408 TH10 Tungaloy indexable insert is suitable for both external and internal turning when used with an appropriate internal holder and stable setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160408 TH10 Wendeplatten - Tungaloy
The combination of a sharp TH10 uncoated carbide edge, a 60° triangular geometry and a 0.8 mm corner radius delivers low cutting forces and consistent surface quality for non‑ferrous turning tasks; benefit from predictable chip control and easy indexing for efficient production. Order the TNMG160408 TH10 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 160408 TH10 – Tungaloy turning insert (ISO triangular, 60°) The TNMG160408 TH10 is an ISO‑standard triangular indexable insert for turning, designed as a sharp universal grade for non‑ferrous materials and applications requiring low cutting forces and clean surface finishes TNMG triangular form with 60° included angle Sharp TH10 grade for non‑ferrous materials 0.8 mm corner radius for fine contouring Double‑sided insert with cylindrical centre hole Precise turning with a sharp, uncoated cutting edge The uncoated carbide grade TH10 is engineered to provide a sharp cutting edge that reduces cutting forces and improves surface quality when machining non‑ferrous materials. In practice, this means less burr formation and easier finishing, especially in delicate or thin‑walled components. An uncoated edge also enables more predictable shear behaviour in alloys where coatings can seize or raise cutting temperatures; the result is a reliable performance profile for jobs where a clean surface and low machining load are priorities. Stable geometry and secure location for reproducible results The triangular TNMG form with a 60° included angle offers a robust profile that resists deflection under cutting loads, and the insert is supplied with a cylindrical centre hole to ensure positive location and clamping. Compatibility with a toolholder is determined by form, clearance angle, tolerance class, fastening, size and thickness, so the insert is best used in ISO‑compatible external or internal turning holders. This architecture delivers reproducible cutting geometry and predictable tool life, which supports process stability and repeatable part quality. Efficient use and handling through double‑sided indexing The double‑sided design extends the usable life of each insert by allowing rotation to a fresh cutting edge, reducing tooling costs per part and minimising set‑up frequency in production. With a plate thickness of 4.76 mm and 0.8 mm corner radius, the insert balances edge strength and contour fidelity: the radius supports smoother transitions and better finishes, while the plate thickness ensures secure clamping and resistance to edge chipping during interrupted cuts. These attributes make the insert a practical choice for shop environments focused on productivity and consistent output. Application guidance and system considerations Use the insert for both external and internal turning operations where non‑ferrous materials are predominant; choose a matching double‑sided chipbreaker and the appropriate grade for the workpiece and machining stability. The system comprises the ISO insert, a suitable external holder or boring bar, and the required shim/clamp set plus replacement screws. For best results, pair the insert with a holder that matches the insert form, clearance angle 0°, tolerance class and thickness to maintain correct tool geometry and secure fixation during high‑feed or interrupted cuts. For selection advice or to request the Tungaloy TNMG160408 TH10 insert, contact Metav Werkzeuge for expert application support and immediate availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808451 Manufacturer article number: 6808451 SKU: 6808451-Tungaloy Manufacturer SKU: TUN6808451 Numbers / Core technical data Size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° ISO designation: 160408 Designs / Special features Uncoated carbide, grade TH10 Double‑sided chipbreaker Triangular plate form Cylindrical centre hole Intended application: turning ISO turning indexable insert series FAQ Which materials are best suited to this insert? The TNMG160408 TH10 insert from Tungaloy is optimised for non‑ferrous materials, providing low cutting forces and clean surface finishes when machining alloys such as aluminium and copper‑based materials. How is holder compatibility determined? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO designation and the cylindrical centre hole facilitate correct location and clamping in ISO‑compatible holders. Is the insert reversible or indexable? Yes, the double‑sided design allows indexing to additional cutting edges, extending the usable life of each insert and reducing tooling changeover frequency. What effect does the 0.8 mm corner radius have? A 0.8 mm corner radius supports a finer surface finish and smoother contour transitions while still providing adequate edge strength for general turning operations. Can this insert be used for internal turning? The insert is suitable for both external and internal turning when matched to an appropriate boring bar or internal holder that accepts ISO‑standard triangular inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 AH110 Wendeplatten - Tungaloy
High wear resistance from the PVD-coated carbide AH110 and a sharp cutting edge ensure stable turning processes and low tool-change frequency; combine these with the double-sided chipbreaker for versatile machining. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. TNMG160412 AH110 Tungaloy indexable turning insert — PVD-coated carbide, 60° triangle The TNMG160412 AH110 is a PVD-coated carbide indexable insert designed for external and internal turning, offering a sharp cutting edge and process-stable performance in a compact 16 mm inscribed circle geometry PVD-coated carbide grade AH110 Sharp cutting edge for process security Double-sided chipbreaker for flexibility 60° triangle shape, 16 mm inscribed circle Increased throughput through stable, wear-resistant cutting The combination of PVD-coated carbide and the AH110 grade offers a significant improvement in wear resistance and edge stability compared with uncoated grades. The PVD layer provides a hard, thermally stable surface that reduces flank wear and keeps the sharp cutting edge longer under intermittent and continuous cutting conditions. For production environments this translates into fewer insert changes, more consistent part geometry and a measurable increase in net productivity. The coating also helps to reduce built-up edge formation when machining demanding materials, which supports repeatable results and predictable tool life. Versatile geometry for external and internal turning applications The insert’s 60° triangle geometry with a 16 mm inscribed circle and a cutting-edge radius of 1.2 mm suits a broad range of turning tasks where access and form accuracy matter. The plate is double-sided and features a cylindrical hole, enabling reliable clamping and straightforward indexing. The nominal thickness 4.76 mm and specified clearance angle 0° are compatible with ISO-standard holders when form, clearance, tolerance class, fastening, size and thickness are matched. Selecting the correct double-sided chipbreaker and grade for the part material and machining stability allows the same insert to be used across roughing and finishing steps, reducing tool inventory complexity. Easy system integration and predictable economics The insert integrates into a standard ISO turning system comprising an indexable insert, an appropriate external holder or boring bar, and the clamping set. Because compatibility depends on measurable parameters rather than ambiguous labels, toolroom staff can match the insert reliably to existing holders and spare screws. Choosing the AH110 grade with its emphasis on process security and fracture resistance lowers the risk of premature edge failure in interrupted cuts, contributing to longer effective tool life and lower production costs per component. For job shops and series manufacturers alike, the result is a balance of reliability and economical performance with a straightforward path to reproducible surface finish and dimensional stability. For precision turning with extended tool life, specify the Tungaloy AH110 grade and contact Metav Werkzeuge for tailored application advice and prompt supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6808506 Manufacturer SKU: TUN6808506 SKU: 6808506-Tungaloy Model series: ISO indexable turning inserts Material: carbide Coating: PVD Core specifications Inscribed circle: 16 mm Thickness: 4.76 mm Cutting edge radius: 1.2 mm Clearance angle: 0° Included angle: 60° Design and special features Triangle shape (three-sided) Cylindrical hole for dowel/fastening Double-sided chipbreaker PVD-coated carbide grade AH110 Application: turning; compatibility by form, clearance, tolerance, fastening, size and thickness FAQ What holder features determine compatibility with this insert? Compatibility is determined by holder form, freestanding clearance angle, tolerance class, fastening method, size and thickness; the TNMG160412 AH110 Tungaloy indexable insert requires a matching holder geometry and clamping set. Which materials suit the AH110 grade best? The AH110 grade is engineered for wear- and fracture-resistant turning; the TNMG160412 AH110 insert performs well across common steels and mixed material batches where a sharp cutting edge and process security are required. What benefit does the PVD coating bring for this insert? The PVD coating on the TNMG160412 AH110 reduces flank wear, improves thermal resistance and helps prevent built-up edge, which supports consistent surface finish and extended tool life. Is the insert reversible or single-sided? The TNMG160412 AH110 insert is double-sided; each side can be indexed to present a fresh cutting edge, enabling efficient use of the plate and reducing tool consumption. Can this insert be used for both roughing and finishing? With the appropriate chipbreaker and machine stability, the TNMG160412 AH110 indexable plate can be applied to roughing and finishing operations; selection should be based on workpiece material and required surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 160412 AH120 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that combines a sharp cutting edge with high resistance to wear and chipping, and benefit from the predictable performance of an ISO-standard triangular insert with a 1.2 mm nose radius for general turning tasks. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. TNMG160412 AH120 triangular indexable insert — PVD-coated carbide, 1.2 mm radius (Tungaloy) The TNMG160412 AH120 is an ISO-standard triangular indexable insert for turning, engineered for process-secure, wear- and chipping-resistant machining in external and internal turning applications. ISO TNMG triangular insert, 60° geometry PVD-coated carbide, AH120 grade 1.2 mm nose radius for versatile turning Double-sided chipbreaker, cylindrical hole Reliable cutting performance for routine turning operations The AH120 grade is a PVD-coated carbide designed to offer a balance between a sharp cutting edge and increased resistance to flank wear and chipping. For operations where process stability matters, this insert provides a consistent cutting behaviour that reduces unexpected tool changes and supports stable cycle times. Selection of the matching chipbreaker and insert grade should be based on workpiece material, machining type and machine stability to secure reproducible results. Precise geometry and mounting that support repeatability The insert’s 60° geometry and 1.2 mm nose radius allow predictable tool engagement and are suitable for a wide range of turning tasks. The insert is double-sided, enabling indexing for further economy, and features a cylindrical hole for positive locating with compatible holders. Compatibility with toolholders is governed by form, relief angle, tolerance class, fastening method, size and thickness; matching these parameters ensures secure clamping and consistent part quality. Coating and substrate properties that extend tool life A PVD coating on a carbide substrate gives the grade enhanced resistance to abrasive wear while maintaining a sharp edge for finishing and medium-cutting conditions. The AH120 formulation is targeted at applications demanding a durable edge and reliable chip control, contributing to improved surface finish and fewer interrupted cuts. Technical clarification and application data are available from Metav Werkzeuge to determine optimal cutting parameters for specific materials and setups. For process-stable turning with Tungaloy AH120 inserts, contact Metav Werkzeuge for ordering and tailored machining advice Technical Data Article number: 6808536 Manufacturer SKU: TUN6808536 Manufacturer item number: 6808536 Label: TNMG160412 AH120 Tungaloy-Wendeplatte Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Size: 16 mm Thickness: 4.76 mm Nose radius: 1.2 mm Insert angle: 60° Rake angle: 0° Special features PVD-coated carbide (AH120) Triangular insert, double-sided Cylindrical locating hole Double-sided chipbreaker ISO-standard insert for turning Compatibility determined by form, relief, tolerance, fastening, size, thickness FAQ What applications suit this insert best? The TNMG160412 AH120 insert is intended for general turning operations, offering process security and a resistant cutting edge for external and internal turning tasks. How is the insert located and clamped in the holder? The insert features a cylindrical hole and fits ISO-compatible holders; compatibility is determined by the holder’s form, relief angle, tolerance class, fastening method, size and thickness. What nose radius and geometry are available on this SKU? This SKU is supplied with a 1.2 mm nose radius and a 60° triangular geometry suited to a range of finishing and medium-turning applications. Is the insert indexable and how many cutting edges are usable? The triangular, double-sided design provides multiple usable edges; the insert can be indexed to access fresh edges as required. What coating and grade does the insert use and what are the benefits? The insert is PVD-coated in the AH120 grade on a carbide substrate, combining wear resistance and a sharp edge to improve surface quality and reduce chipping risk. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com