TNMG 220416 T9215 Wendeplatten - Tungaloy
Take advantage of the T9215 CVD-coated carbide and the double-sided chipbreaker for reliable chip control and extended tool life; the ISO conformity and clear geometric data ensure predictable clamping and easy integration into existing tool systems. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 220416 T9215 turning insert — Tungaloy, CVD-coated carbide, 1.6 mm radius The TNMG 220416 T9215 is an ISO-standard triangular turning insert designed for external and internal turning of medium steels, combining high wear resistance with dependable fracture toughness. CVD-coated carbide grade T9215 Optimised for medium steel machining Triangular 22 mm insert, 60° included angle Double-sided chipbreaker, cylindrical hole Higher productivity through a balanced grade and coating The combination of CVD coating and a hard carbide substrate in grade T9215 delivers a balanced mix of wear resistance and edge toughness, which is particularly effective during continuous or slightly interrupted cuts. This mix reduces flank wear under typical feed and speed windows for medium-strength steels and supports higher average cutting speeds, resulting in a clear productivity gain per tool life. The coated surface also improves thermal stability at the cutting edge, which helps maintain dimensional consistency over longer production runs. Predictable fit and geometry for quick tool changes As an ISO-standard insert with a 22 mm edge length and 60° included angle, the geometry guarantees interchangeability with matching holders when form, clearance angle, tolerance class, fastening method, size and thickness correspond. The 1.6 mm radius provides a compromise between edge strength and surface finish capability; a larger radius increases stability and part finish, while the triangular form enables three indexed corners per side. Note the insert’s 0° relief angle, 4.76 mm thickness and cylindrical locating hole, which together ensure reliable clamping and repeatable positioning in the toolholder. Better process control with a dual-sided chipbreaker A double-sided chipbreaker allows orientation flexibility and consistent chip control across a range of feeds. For each workpiece and machining condition, select the chipbreaker variant and grade pairing appropriate to material, machining strategy and rigidity of the set-up. The insert is intended as part of a system comprising the insert, holder or boring bar, shim/seat and fastening screw; matching these components minimises vibration and protects the cutting edge, which in turn reduces scrap and tool-change frequency. The net effect is improved consistency in everyday production and fewer interruptions. For high-productivity turning on medium steels, request matching holders and application advice from Metav Werkzeuge — Metav Werkzeuge offers detailed compatibility checks and fast delivery; contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations Technical data Article number: 6773921 SKU: 6773921-Tungaloy Manufacturer article number: TUN6773921 Facts Designation: TNMG220416 Size: 22 mm Thickness: 4.76 mm Corner radius: 1.6 mm Included angle: 60° Relief angle (frewinkel): 0° Special features Material: carbide Grade/coating: T9215 (CVD-coated) Plate shape: triangular Hole: with hole (cylindrical hole) Chipbreaker: double-sided Series: ISO turning inserts Application: turning FAQ What materials is this insert best suited for? The TNMG 220416 T9215 turning insert is optimised for medium steel machining; grade T9215 balances wear resistance and toughness for productive performance. How does the CVD coating affect cutting performance? The CVD coating on the TNMG 220416 increases thermal stability and wear resistance, allowing stable performance at higher cutting speeds and extending usable tool life. Is this insert compatible with standard ISO TNMG holders? Yes — compatibility depends on matching the insert form, relief angle, tolerance class, fastening and thickness; TNMG 220416 follows the ISO designation for straightforward interchange. What advantage does the 1.6 mm corner radius provide? A 1.6 mm radius offers improved edge strength over small radii and contributes to a better surface finish under suitable feeds, making it a versatile choice for medium-duty turning. How should the double-sided chipbreaker be used? The double-sided chipbreaker provides two usable faces for chip control; choose the orientation and feed/speed combination that best suits the workpiece material and machining stability for consistent chip formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220416 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a 60° triangular geometry and a robust 1.6 mm corner radius to maintain high productivity in medium steel turning; order directly via Metav Werkzeuge or request application advice from our consultants. TNMG 220416 T9215 turning insert — CVD-coated carbide, 60° triangle, Tungaloy The TNMG 220416 T9215 is an ISO-standard triangular turning insert designed for medium steel machining, suitable for continuous to slightly interrupted external and internal turning operations. CVD-coated carbide T9215 for wear resistance 60° triangular shape for stable cutting 1.6 mm corner radius for durable edge Double-sided chipbreaker, with cylindrical hole Engineered for consistent productivity The combination of a CVD-coated carbide substrate and the T9215 grade delivers a balance of high wear resistance and breakage toughness, optimised for medium steel applications. This composition supports longer tool life under continuous cuts and helps sustain cycle times in repetitive production. The insert’s finishing characteristics reduce rework and keep machining stable across batches, making it a sound choice where uptime and repeatability matter. Geometry that stabilises cutting and surface quality A 60° triangular geometry with a 1.6 mm corner radius gives a robust cutting edge that withstands moderate feed and depth of cut while producing a consistent surface finish. The insert thickness of 4.76 mm and the inscribed circle size of 22 mm contribute to mechanical rigidity when mounted in a compatible clamping system. These geometric factors minimise chatter risk and help maintain dimensional control on turned components. ISO compatibility and system considerations As an ISO-standard turning insert, compatibility with toolholders depends on matching shape, clearance angle, tolerance class, clamping style, size and thickness. The indexable design includes a cylindrical hole for secure fastening and a double-sided chipbreaker, enabling multiple indexed edges and cost-efficient use. For optimal results, pair the insert with a matching external holder or boring bar plus the correct shim and clamp set; select the chipbreaker style and grade according to workpiece material and cut stability. Practical workshop advantages and handling The insert’s double-sided construction increases the number of usable cutting edges, reducing changeover time and per-edge cost. The T9215 grade is particularly well suited to operations that demand steady productivity without frequent tool changes. Stored and handled as standard ISO inserts, these components integrate easily into existing tool inventories and can be swapped quickly to restore machining capability, supporting lean production practices and predictable throughput. For application advice or to secure supply of the Tungaloy TNMG 220416 T9215 for medium-steel turning, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and prompt delivery. Technical data Article number: 6772334 Manufacturer SKU: TUN6772334 SKU: 6772334-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: T9215 Insert designation: TNMG220416 Facts Corner radius: 1.6 mm Thickness: 4.76 mm Inscribed circle (size): 22 mm Included angle: 60° Relief (free) angle: 0° Special features CVD-coated carbide Double-sided chipbreaker Triangular insert form Cylindrical hole for clamping Suited for external and internal turning Compatible with ISO toolholder systems FAQ Is this insert suitable for both external and internal turning? The TNMG 220416 T9215 is designed for both external and internal turning; its ISO triangular form and robust grade make it appropriate for typical turning operations in medium steel. How many usable cutting edges does a double-sided TNMG provide? A double-sided triangular insert such as this typically offers multiple indexed edges; the design extends cost-efficiency by allowing rotation to fresh cutting edges before replacement. Which workpiece materials match the T9215 grade best? The T9215 grade is the first choice for medium steel machining, combining wear resistance and fracture toughness for continuous to lightly interrupted cuts. Does the insert require a specific clamping style? The insert features a cylindrical hole and is clamped according to ISO holder interfaces; compatibility is determined by shape, size, thickness and tolerance class of the toolholder. Can the TNMG 220416 be used in interrupted cuts? Yes; the T9215 grade and the insert’s geometry support continuous to slightly interrupted cuts, though heavily interrupted conditions may require a dedicated geometry or grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220416 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide grade T9225 and the robust triangular geometry for stable medium‑to‑heavy steel turning; the combination of toughness, chip control and ISO compatibility supports consistent cycle times and predictable tool life. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored recommendations. TNMG220416 T9225 TNMG turning insert, CVD‑coated carbide, 60° triangle (Tungaloy) The TNMG220416 T9225 is an ISO‑standard triangular turning insert designed for external and internal turning of steel, offering a universal, robust grade for variable cutting conditions. TNMG220416 geometry for ISO turning CVD-coated carbide grade T9225 for robustness Double-sided chipbreaker for versatile cutting 1.6 mm corner radius for stable engagement Durable grade and coating for demanding steel work The insert combines a CVD‑coated surface with a carbide substrate and the T9225 specification to deliver enhanced wear resistance and greater toughness under variable engagement conditions. This engineered pairing reduces flank wear during prolonged runs and favours process stability when machining medium‑to‑heavy steel; the coating improves thermal stability and lowers adhesive wear in wet and dry turning alike. For production environments where cutting conditions change or where slight interruptions occur, the composition of the grade is intended to extend effective tool life while maintaining dimensional quality. Geometry and chip control that stabilise cutting performance The triangular plate with a 60° cutting angle and a 1.6 mm corner radius provides a balance between strength and accessibility, enabling secure entry and reduced vibration on heavier cuts. The double‑sided chipbreaker actively manages chip flow and cutting forces, which aids in maintaining consistent surface finish and reduces the risk of re‑cutting. A cylindrical hole ensures secure clamping in compatible holders, while the plate thickness (4.76 mm) and 22 mm size contribute to stable clamping and repeatable positioning. These geometric decisions translate into fewer interruptions for re‑indexing and improved uptime on the machining centre. Practical system guidance and application notes This insert is intended for use within an ISO turning system consisting of an appropriate external holder or boring bar, a shim or clamping set and replacement fastening screws. Holder compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; selecting the correct chipbreaker and matching the T9225 grade to workpiece stability is essential for optimised productivity. Typical use covers both external and internal turning operations on steel where a combination of strength and fracture resistance is required. For customers seeking process security and repeatable results, the insert’s design supports predictable tool change intervals and consistent part quality. For reliable medium‑to‑heavy steel turning with Tungaloy’s CVD‑coated T9225 inserts, contact Metav Werkzeuge for technical advice or to arrange supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6780740 SKU: 6780740-Tungaloy Manufacturer SKU: TUN6780740 Designation: TNMG220416 T9225 Model series: ISO turning inserts Numbers / Core technical data Corner radius: 1.6 mm Cutting edge angle: 60° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 22 mm Designs / Special features Material: carbide (CVD‑coated) Double‑sided chipbreaker Triangle plate with cylindrical hole Suitable for external and internal turning ISO compatibility; form, tolerance and fastening determine holder match FAQ Which holders are compatible with this TNMG variant? Compatibility depends on the holder form, clearance angle, tolerance class, fastening method, size and thickness; the TNMG220416 T9225 fits ISO‑standard holders designed for TNMG inserts when those parameters match. What materials can be machined with this insert? The T9225 grade is formulated for medium‑to‑heavy steel machining and performs well where toughness is required under varying engagement or slightly interrupted cuts. Is the insert suitable for interrupted cutting? Yes, the combination of the T9225 grade and the triangular geometry with a 1.6 mm corner radius improves resistance to impact and supports interrupted cutting scenarios. How does the chipbreaker affect cutting? The double‑sided chipbreaker directs chips and controls cutting forces, which helps maintain surface finish and reduces the likelihood of chip re‑entanglement on the workpiece. What components form the complete turning system for this insert? A complete system typically comprises the insert, a matching external holder or boring bar, a shim/clamping set and the appropriate replacement screws for secure fastening. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 220416 T9225 Wendeplatten - Tungaloy
Benefit from the CVD‑coated carbide T9225 and ISO‑standard TNMG geometry for robust medium‑to‑heavy steel turning, delivering reliable edge stability and straightforward holder compatibility; order directly via Metav Werkzeuge or consult our specialists for matching tooling recommendations. TNMG220416 T9225 — Turning insert by Tungaloy (ISO TNMG series) A TNMG220416 T9225 ISO‑standard triangular insert for medium to heavy steel turning, offering a CVD‑coated carbide grade and a double‑sided chipbreaker for secure machining under variable engagement conditions CVD-coated carbide grade T9225 ISO TNMG220416 triangular form Double-sided chipbreaker, with cylindrical hole Robust for medium to heavy steel turning Reliable chip control and edge life for demanding turning The insert uses a CVD‑coated carbide substrate in the T9225 grade, selected for toughness and resistance to flank wear in variable cutting conditions. The CVD coating provides a hard, wear‑resistant surface while preserving core toughness; this combination reduces flank wear and maintains cutting edge integrity during medium‑to‑heavy steel machining. The integrated chipbreaker promotes consistent chip formation and evacuation, which supports stable cutting forces and reduces the risk of built‑up edge during interrupted cuts. ISO geometry ensures predictable holder compatibility Manufactured to the ISO TNMG form, the insert’s compatibility with toolholders is defined by geometry, clearance, tolerance class, fastening and thickness. The standard triangular format and specified relief angle help to achieve predictable seating and repeatable positional accuracy in compatible external holders or boring bars. This consistency simplifies process planning and reduces set‑up variability in production environments that rely on indexed inserts for repeatable results. Practical benefits in production: fewer interruptions, steady productivity The double‑sided design and robust grade lower the frequency of index changes and spare‑part turnover, contributing to uninterrupted machining cycles. The insert is suitable where slightly interrupted cuts or fluctuating engagement demand additional toughness; as a result, tool life is enhanced and unplanned downtime is minimised. Selecting the appropriate chipbreaker and toughness grade for the workpiece material yields measurable gains in process reliability and surface finish quality. System considerations and inventory optimisation The insert forms part of a standard ISO turning system comprising the insert itself, a matching external holder or boring bar, a locating pad/clamping kit and replacement fastening screws. Using a double‑sided triangular insert reduces the number of distinct items kept in stock while ensuring several effective cutting edges per insert. When specifying replacements, check the inscribed circle size, plate thickness, hole style and relief angle to guarantee proper fit and clamp engagement in the chosen tooling system. For technical selection and to secure compatible holders or clamping kits, contact Metav Werkzeuge — technical advice, availability and ordering are provided directly by Metav Werkzeuge (info@metav-werkzeuge.com / +49 2822 7131930) Technical Data Article number: 6780830 SKU: 6780830-Tungaloy Manufacturer SKU: TUN6780830 Manufacturer: Tungaloy Facts Corner radius: 1.6 mm Insert included angle: 60° Relief angle: 0° Thickness: 4.76 mm Inscribed circle: 22 mm Hole: cylindrical hole Double‑sided chipbreaker Special features Material: carbide Coating / grade: T9225 (CVD‑coated) Application: Turning (external and internal) Plate form: triangular Designed for medium to heavy steel machining System components: insert, holder/boring bar, underlay/clamping kit, replacement screws FAQ What workpiece materials is this insert designed for? The TNMG220416 T9225 insert by Tungaloy is engineered primarily for medium‑to‑heavy steel turning, optimised for applications with variable engagement and light interruptions. How does the T9225 coating affect performance? The T9225 CVD coating creates a wear‑resistant surface while retaining core toughness; this combination improves flank life and supports reliable chip formation under fluctuating cutting conditions. Is the insert indexable and how does that influence inventory? The triangular insert is double‑sided and indexable, which extends usable cutting edges per item and reduces the variety of inserts required in stock for comparable part families. Which holder characteristics ensure proper fit for this insert? Compatibility depends on form, relief/clearance angle, tolerance class, fastening method, size and thickness; matching these parameters ensures correct seating and repeatable performance. What are the physical identifiers to check when ordering replacements? Check the inscribed circle (22 mm), corner radius (1.6 mm), thickness (4.76 mm), hole style (cylindrical) and included angle (60°) to guarantee proper replacement and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 220416 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a robust CVD‑coated carbide grade, precise ISO geometry and proven compatibility with standard turning holders for dependable mid- to heavy‑duty steel machining; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TNMG 220416 T9225 — Turning insert, CVD‑coated carbide, 60° (Tungaloy) The TNMG 220416 T9225 is an ISO‑standard triangular indexable insert designed for external and internal turning, delivering consistent performance in medium to heavy steel machining. ISO triangular insert TNMG 220416 CVD‑coated carbide grade T9225 60° geometry with 1.6 mm corner radius Double‑sided chipbreaker, cylindrical hole Reliable grade for demanding steel turning The CVD‑coated carbide T9225 is formulated as a robust universal grade for medium to heavy steel machining, offering a balance of hardness and toughness. Its composition supports stable chip formation under varying engagement conditions and provides enhanced resistance to flank wear during longer cuts. For operations with slight interruptions or variable cutting forces, the grade’s increased toughness reduces the risk of chipping and extends tool life, resulting in fewer indexings and improved production efficiency. The insert model TNMG220416 is therefore suited to workshops that require predictable performance across a range of steel materials. Precise geometry that simplifies setup and improves surface finish The triangular 60° geometry with a 1.6 mm corner radius and a plate thickness of 4.76 mm gives stable support in the holder while allowing controllable chip load and good surface integrity. The ISO standard form ensures compatibility with many external holders and boring bars; however, correct matching depends on form, clearance angle, tolerance class, fastening method, size and thickness. The insert’s cylindrical hole and double‑sided design enable straightforward clamping and economical indexability. For machinists, this means faster tool changes, consistent runout behaviour and reduced setup time when integrating into existing tool systems. Practical system benefits for workshop productivity In a typical system build the indexable plate pairs with a suitable external holder or boring bar, plus a shim/clamping set and spare screws, enabling a complete turning solution without complex adjustments. The double‑sided chipbreaker supports reliable chip control in external and internal turning and reduces the need for secondary operations caused by poor chip evacuation. Together, these characteristics enhance process stability and can lower total machining costs through longer tool life, fewer interruptions and improved component repeatability. Clear specification and consistent material compatibility make this insert a dependable choice for daily production work. Contact Metav Werkzeuge for tailored application recommendations and to source TNMG 220416 T9225 turning inserts promptly Technical data Article number: 6781338 Facts Geometry: 60° Corner radius: 1.6 mm Plate thickness: 4.76 mm Size: 22 Clearance angle: 0° Manufacturer SKU: TUN6781338 Special features Carbide grade: T9225 Coating: CVD Shape: triangular, double‑sided Hole: with cylindrical hole Typical application: external and internal turning Model series: ISO turning indexable inserts Material: carbide FAQ Which turning operations are suitable for this insert? The TNMG 220416 T9225 insert by Tungaloy is intended for external and internal turning, especially for medium to heavy machining of steel where intermittent cuts or changing engagement conditions occur. What are the key geometry and dimensions to check when fitting the insert? Relevant dimensions are the 60° triangle geometry, 1.6 mm corner radius and 4.76 mm plate thickness; these determine compatibility with the chosen holder and affect chip load and surface finish. Is this grade suitable for interrupted cuts or unstable conditions? Yes, the T9225 CVD‑coated carbide grade provides enhanced toughness and stable chip formation, making it appropriate for slightly interrupted cuts and variable machining conditions. What components make up the complete turning system for this indexable plate? A standard system comprises the ISO insert, a compatible external holder or boring bar, the correct shim/clamping set and appropriate screws for secure mounting of the plate Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 220416 TH10 Wendeplatten - Tungaloy
Benefit from a cost‑efficient combination of a sharp uncoated carbide grade and a secure, ISO‑compliant fixing; the result is low cutting forces and clean surface finish in non‑ferrous turning — order the TNMG220416 TH10 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG 220416 TH10 Turning insert (ISO, 60°) — Tungaloy The TNMG220416 TH10 is an ISO‑standard turning insert for external and internal turning, designed for low cutting forces and clean surface finishes in non‑ferrous materials. ISO triangular insert TNMG 60° geometry Uncoated carbide grade TH10 for low cutting forces Double-sided insert with cylindrical centre hole Corner radius 1.6 mm and thickness 4.76 mm Gain efficient turning with a low‑force uncoated grade The combination of a sharp edge geometry and uncoated carbide construction reduces cutting forces and helps to produce consistently clean surfaces on aluminium, brass and many plastics. This performance is particularly useful where material adhesion and built‑up edge must be avoided; the TH10 grade is specified for universal non‑ferrous applications and supports economical machining by prolonging tool life and improving cycle times. The result is fewer rework operations and a more predictable production flow. Secure clamping and ISO compatibility for reliable production The insert follows ISO standard dimensions and fits common external holders and boring bars when matched for form, relief angle, tolerance class, fixing method, size and thickness. The cylindrical centre hole allows stable clamping and quick indexation, while the double‑sided design permits two usable edges per insert, improving cost efficiency. With a 60° geometry, corner radius 1.6 mm and a plate thickness of 4.76 mm, this insert offers a balance of edge strength and accessibility for typical turning tasks. Practical selection and system guidance for confident use For best results in external and internal turning, select a chipbreaker and grade suited to the workpiece and machining stability; the double‑sided chipbreaker variant is tailored for controlled chip formation and consistent surface quality. The system comprises the insert, a compatible holder, shim/clamp set and replacement screws — ensuring every component contributes to machining reliability. When switching from coated grades, expect lower cutting forces and often improved surface finish on soft, ductile materials. For machining of non‑ferrous components, accept the recommendation of Tungaloy's TH10 grade — contact Metav Werkzeuge to confirm holder compatibility, request cutting parameters or discuss application specifics at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808688 Manufacturer SKU: TUN6808688 Model series: ISO-Drehwendeschneidplatten Material: Carbide Manufacturer: Tungaloy Facts Geometry angle: 60° Size (inscribed circle): 22 mm Thickness: 4.76 mm Corner radius: 1.6 mm Relief angle: 0° SKU: 6808688-Tungaloy Special features Uncoated carbide grade TH10 Double-sided chipbreaker Cylindrical centre hole Triangular plate shape Suitable for turning (external and internal) Compatible with ISO holders FAQ What materials is this insert best suited for? The TNMG220416 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass, and for applications where a low cutting force and clean surface finish are required. How many usable edges does the insert provide? This triangular insert is double‑sided, offering two usable cutting edges per face and enabling economical indexing and longer tool life for repetitive turning operations. What clamping features ensure reliable fixation? The cylindrical centre hole combined with the ISO‑compliant form and tolerance allows secure clamping in compatible holders and supports consistent machining results. Is the TNMG220416 TH10 suitable for internal boring as well as external turning? Yes, the geometry and dimensions make the insert appropriate for both external and internal turning, provided the holder geometry and overhang are suitable for the operation. Where can cutting data and holder recommendations be obtained? Cutting parameters and holder compatibility notes are available from Metav Werkzeuge; the TNMG220416 TH10 product sheet also lists system components and suggested settings. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 270608 AH120 Wendeplatten - Tungaloy
Take advantage of a wear-resistant, PVD-coated carbide grade together with a sharp cutting edge and robust 60° geometry to maintain stable production and predictable tool life; the TNMG270608 AH120 excels where process security and edge integrity are essential. Order genuine inserts directly via Metav Werkzeuge or consult the team for application-specific recommendations. TNMG270608 AH120 Tungaloy turning insert — PVD-coated carbide, 60° triangle A TNMG270608 AH120 indexable insert for ISO-standard turning, designed for stable, high-reliability external and internal turning operations ISO TNMG triangle insert, 60° geometry PVD-coated AH120 carbide for wear resistance Double-sided chipbreaker for consistent chips 0° clearance angle for sharp cutting edge Enhanced machining stability with a wear-resistant grade The combination of a PVD-coated surface and the AH120 carbide composition delivers a balance of wear resistance and fracture toughness that supports steady cutting conditions. Specified as an ISO-style indexable insert, this triangular tool provides a consistent contact geometry that helps to maintain a sharp cutting edge over extended runs. The result is measurable process stability: fewer unscheduled tool changes, more predictable component quality and improved overall efficiency in turning applications where repeatability matters. Versatile use and matching to holder systems Designed for both external and internal turning, the insert is part of a standardised ISO system and therefore integrates with a wide range of holders when form, clearance angle, tolerance class, fastening method, size and thickness align. The insert’s triangular shape and double-sided chipbreaker allow rotation for fresh cutting edges, optimising tool utilisation. Selection of the correct chipbreaker and grade should be based on the workpiece material and machining conditions to achieve the intended surface finish and chip control. Geometry and dimensions that support robust setups Key dimensional features contribute directly to handling and performance: the 60° geometry and R0.8 mm corner radius give a reliable compromise between edge strength and the potential for fine finishes. With a thickness of 6.35 mm and an inscribed circle of 27 mm, the insert offers mechanical stability in clamping and resistance to deflection under cutting forces. The design includes a cylindrical hole, enabling secure fastening to compatible holders and straightforward indexability for rapid insert changes during production. Practical system considerations and productivity gains As part of a complete turning system, the insert works together with an appropriate outer holder or boring bar, underlay/shim and fastening screws to ensure repeatable clamping and positional accuracy. The PVD surface treatment supports consistent tool life, which lowers tooling consumption and contributes to reduced downtime. For operations requiring a sharp edge and high process reliability, this indexable insert provides a pragmatic route to improved throughput while simplifying inventory: a small range of well-chosen grades and chipbreakers can cover many everyday turning tasks. Contact Metav Werkzeuge today for tailored application advice and to request genuine Tungaloy TNMG270608 AH120 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6808696 SKU: 6808696-Tungaloy Manufacturer SKU: TUN6808696 Model series: ISO-Drehwendeschneidplatten Designation: TNMG270608 AH120 Tungaloy-Wendeplatte Core data Geometry: 60° Inscribed circle: 27 mm Thickness: 6.35 mm Corner radius: R0.8 mm Clearance angle: 0° Hole: with cylindrical hole Materials & features Material: PVD-coated carbide (AH120) Insert form: triangular, double-sided chipbreaker Application: turning (external and internal) Compatibility: ISO holders (form, clearance angle, tolerance class, fastening, size, thickness) System components: insert, outer holder or boring bar, shim/clamp set, spare screws FAQ What machining tasks is this insert suited for? The AH120 grade is formulated for turning tasks that demand a wear- and fracture-resistant cutting edge; it is intended for stable external and internal turning where process security is required. Is the TNMG270608 compatible with my ISO holders? Compatibility depends on matching form, clearance angle, tolerance class, fastening method, size and thickness; the TNMG270608 fits standard ISO indexable holder concepts when those parameters correspond. How does the AH120 PVD coating affect performance? The PVD-coated AH120 surface reduces abrasive wear and improves edge integrity, extending effective cutting life and helping to maintain consistent component quality. What are the key dimensions to check before ordering? Important dimensions include the 27 mm inscribed circle, 6.35 mm thickness and R0.8 mm corner radius; verify the 60° geometry and the presence of the cylindrical hole for correct mounting. Can the insert be rotated for multiple cutting edges? Yes — the triangular format with a double-sided chipbreaker enables indexing to fresh edges, enhancing utilisation and reducing tooling change frequency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 270608 T9225 Wendeplatten - Tungaloy
Combining the CVD‑coated T9225 grade with a triangular 27 mm geometry and a 0.8 mm corner radius results in high process stability for medium‑to‑heavy turning. The double‑sided, indexable design and 6.35 mm plate thickness ensure robust clamping and extended edge life. Order directly via Metav Werkzeuge or consult our advisors for application‑specific selection. TNMG270608 T9225 ISO turning insert — Tungaloy TNMG270608 T9225 ISO turning insert for medium‑to‑heavy turning applications with robust universal grade performance CVD‑coated carbide grade T9225 Robust universal grade for medium–heavy Stahl Triangular 27 mm insert, 6.35 mm thick Double‑sided with 0.8 mm corner radius Consistent cutting performance under varying engagement The T9225 grade is a CVD‑coated carbide designed to combine toughness and wear resistance, making it suitable for medium‑to‑heavy Stahl turning where engagement depth and cut conditions vary. The coating improves thermal stability and reduces flank wear, while the substrate maintains edge strength during interrupted cuts. This balance delivers predictable tool life and fewer changeovers, supporting continuous production and higher machine utilisation. Secure seating and easy indexing for productive tool systems The insert features a triangular 27 mm form with a cylindrical hole and 6.35 mm plate thickness, offering stable clamping in compatible holders and boring bars. The double‑sided chipbreaker provides two usable cutting edges per index, effectively doubling effective edge life before disposal. The 60° included angle and 0° clearance specification define the geometry for matchable toolholders; compatibility depends on holder form, clearance, tolerance class, fixing method, size and thickness. Clear understanding of these parameters enables correct toolholder selection and safe assembly. Operational benefits and recommended applications With a 0.8 mm corner radius and robust chip control, the insert supports external and internal turning where edge stability and reliable chip formation are priorities. The universal nature of the grade simplifies inventory management across mixed Stahl parts and reduces set‑up variants. For workshops facing intermittent cuts or variable engagement, this indexable solution improves process reliability and minimises unplanned downtime while maintaining surface quality and repeatability. Contact Metav Werkzeuge for tailored application advice or to secure Tungaloy turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781263-Tungaloy Manufacturer SKU: TUN6781263 Manufacturer article number: 6781263 Model series: ISO turning inserts Core specifications Insert designation: TNMG270608 Grade/coating: T9225 (CVD‑coated carbide) Shape: triangular (27 mm) Thickness: 6.35 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Hole: cylindrical, with hole Chipbreaker: double‑sided Materials and applications Material: carbide Primary application: turning Typical workpiece: Stahl Suitable for interrupted cuts and varying engagement System components: insert, suitable external holder or boring bar, clamping set and replacement screws Two cutting edges per indexed side FAQ What materials is this insert suitable for? The TNMG270608 T9225 insert (Tungaloy, SKU 6781263-Tungaloy) is optimised for machining Stahl and performs well in medium‑to‑heavy applications where toughness is required. How many cutting edges are available per insert? Each double‑sided TNMG insert provides two indexed cutting edges per side, effectively increasing usable edges before replacement. What does the T9225 designation indicate? T9225 denotes a CVD‑coated carbide grade engineered for a balance of toughness and wear resistance, aimed at robust universal performance in turning. Which insert geometry must the holder support? The holder must accept a triangular 27 mm insert with a 6.35 mm plate thickness, cylindrical hole, and 60° included angle; clearance, tolerance class and fixing method also determine compatibility. Is this insert suitable for interrupted cuts? Yes, the grade and substrate design provide enhanced edge strength for light interruptions and variable engagement scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 270612 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability and precise 60° triangular geometry for consistent turning performance; order directly via Metav Werkzeuge or request consultancy for application-specific setup. TNMG 270612 AH120 — ISO turning insert (indexable) by Tungaloy, PVD-coated carbide, 60° The TNMG270612 AH120 is a 60° triangular ISO indexable insert for external and internal turning, engineered for applications that demand a sharp cutting edge and high process security. PVD-coated carbide AH120 60° ISO triangular insert Corner radius 1.2 mm Double-sided chipbreaker, cylindrical hole Longer tool life through a wear-resistant coating The insert's PVD-coated carbide grade AH120 delivers a wear- and fracture-resistant cutting edge, which extends service intervals and reduces machine downtime. As an ISO-standardised indexable insert, the design supports repeatable seating and secure clamping, contributing to stable cutting conditions and reproducible component quality. The combination of coating and substrate is aimed at conserving edge integrity where a sharp geometry and process reliability are required. Consistent chip control and reliable cutting performance A double-sided chipbreaker on the triangular plate improves chip formation under varied cutting conditions, helping to avoid built-up edge and uncontrolled chip flow. The insert's geometry — 60° main angle with a 1.2 mm corner radius — provides a balance between strength and fine surface finish, allowing effective material removal while maintaining the cutting-edge robustness needed for medium to demanding turning tasks. Selecting the appropriate chipbreaker style and grade helps match the insert to workpiece material and machining stability. Easy integration into ISO tool systems for faster setup Compatibility with standard indexable holders is determined by the insert form, clearance angle, tolerance class, attachment method, size and thickness. The TNMG form and the cylindrical hole ensure positive mechanical location and tightening in the seat, while the 6.35 mm plate thickness and 27 mm size offer stable support under cutting forces. This standardisation reduces set-up time and simplifies inventory management when multiple holders or backup inserts are required. Practical application guidance for turning tasks Designed for both external and internal turning, this insert is best used where a sharp cutting edge and secure process behaviour are priorities; the AH120 grade is specifically formulated to resist wear and chipping during turning. For best results, match the chipbreaker and grade selection to the workpiece material, machining parameters and setup rigidity. Technical queries or assistance in choosing the correct insert-to-holder combination can be provided by Metav Werkzeuge to help optimise cycle time and surface quality. For tailored technical advice and availability on Tungaloy turning inserts such as the TNMG 270612 AH120, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — application consultancy and order support are available. Technical data Article number: 6808698 Manufacturer SKU: TUN6808698 SKU: 6808698-Tungaloy Brand: Tungaloy Model series: ISO indexable turning inserts Designation: TNMG270612 AH120 Tungaloy insert Core data Insert size: 27 mm Plate thickness: 6.35 mm Main angle: 60° Corner radius: 1.2 mm Clearance angle: 0° Hole style: cylindrical Special features PVD-coated carbide (AH120) Double-sided chipbreaker ISO-standard triangular geometry Suitable for external and internal turning With central hole for secure clamping FAQ What is the primary use of this insert? The TNMG270612 AH120 insert is intended for external and internal turning operations where a sharp cutting edge and process security are required; it is an ISO-standard triangular indexable insert from Tungaloy (SKU 6808698-Tungaloy). Which cutting conditions suit the AH120 grade best? The AH120 PVD-coated grade is tailored for applications needing wear resistance and reduced edge chipping during turning; choose the chipbreaker and cutting data according to the workpiece material and the rigidity of the setup. How is the insert mounted in the tool holder? The insert locates on a matching seat and is clamped using the central cylindrical hole; compatibility depends on form, clearance angle, tolerance class, attachment method, size and thickness of the insert and holder. Can both sides of the insert be used? Yes, the insert is double-sided with a reversible cutting geometry, allowing indexing to a fresh cutting edge once one edge is worn, increasing usable edges per insert. What are the key dimensions to check for holder compatibility? Important dimensions are the 27 mm size, 6.35 mm thickness, 60° triangular form and 1.2 mm corner radius; verify these against holder specifications and tolerance classes for correct seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMG 270612 T9225 Wendeplatten - Tungaloy
The combination of a CVD‑coated cemented carbide grade and a triangular ISO geometry delivers robust performance for medium to heavy steel turning operations; the insert’s 1.2 mm corner radius and double‑sided chipbreaker support stable chip control and extended tool life. Order genuine Tungaloy inserts via Metav Werkzeuge or contact the consultants for technical guidance. TNMG270612 T9225 — ISO turning insert, CVD‑coated carbide, 60° (Tungaloy) TNMG270612 T9225 is an ISO‑standard triangular indexable insert engineered for external and internal turning of steel, offering a universal grade designed to cope with variable engagement and lightly interrupted cuts. CVD‑coated cemented carbide grade T9225 Triangular 60° geometry for versatile turning 1.2 mm corner radius for durable edges Double‑sided chipbreaker for consistent chips Durable grade and coating for reliable performance The T9225 grade, a CVD‑coated cemented carbide, provides a balance between toughness and wear resistance suited to medium to heavy steel turning. The coating improves abrasion resistance at elevated cutting temperatures, while the substrate gives necessary fracture toughness when cuts are intermittent. The triangular form with a 60° included angle and a 1.2 mm corner radius gives a reproducible cutting edge geometry, helping to maintain consistent part tolerances and surface finish over longer runs. Compatibility with tooling systems depends on insert form, clearance angle, tolerance class, fastening method, size and thickness — factors that determine secure seating in a holder and repeatable positioning. Practical system setup and selection advice Designed as part of an ISO insert system, the package concept includes the insert itself together with a matching external holder or boring bar, correct seat/locator components and clamp set plus replacement screws where required. The double‑sided chipbreaker permits economical use of both cutting edges and supports predictable chip formation across varying feeds. When selecting a chipbreaker and grade, match the insert’s characteristics to the workpiece material and machining stability: the T9225 grade is recommended where toughness is prioritised—such as slightly interrupted cuts or mixed engagement—making it suitable for mixed batch production and repairs as well as serial turning. Performance benefits that support productivity Using an ISO triangular insert with CVD coating and a robust chip control geometry reduces unplanned tool changes and improves process security, which in turn increases productive cutting time per shift. The design supports improved surface quality and dimensional repeatability, especially on steel components where stable chip formation is essential. Together, these factors contribute to lower unit machining costs through longer tool life and fewer rejects. For operations seeking a pragmatic balance of durability and versatility, this insert offers a dependable solution for a wide range of turning tasks. For technical consultation, order placement, or assistance in selecting the correct insert geometry for a specific holder, contact Metav Werkzeuge for expert support and rapid supply. Technical data Article number: 6781262 Manufacturer SKU: TUN6781262 Metav SKU: 6781262-Tungaloy Series: ISO turning indexable inserts Facts Size: 27 mm Thickness: 6.35 mm Corner radius: 1.2 mm Included angle: 60° Clearance angle: 0° Hole: with cylindrical hole Special features Material: cemented carbide Coating: CVD Grade: T9225 Shape: triangular Chipbreaker: double‑sided Application: turning System components: insert, appropriate holder or boring bar, seat/clamp set, replacement screws FAQ What workpiece materials is this insert suitable for? The Tungaloy TNMG270612 T9225 insert is tailored for steel machining and performs well in medium to heavy turning of steel, offering good chip control and toughness for slightly interrupted cuts. How many cutting edges are available per insert? As a double‑sided triangular insert, the TNMG270612 provides multiple usable cutting edges; both sides of the chipbreaker can be utilised before re‑indexing or replacement. Can this insert be used for internal and external turning? Yes, the ISO geometry and the insert’s dimensions allow use in both external holders and boring bars for internal turning, provided the holder matches the insert form and size. What are the dimensional key data to check for holder compatibility? Check insert size (27 mm), thickness (6.35 mm), included angle (60°), clearance angle (0°), corner radius (1.2 mm) and the presence of a cylindrical hole to ensure correct seating and fastening in the selected holder. Does the T9225 grade suit interrupted cuts? The T9225 grade is a robust universal grade designed to tolerate variable engagement and lightly interrupted cuts, delivering stable chip formation under changing conditions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMG 270616 AH120 Wendeplatten - Tungaloy
Benefit from a highly process‑secure, wear‑resistant turning solution that combines a PVD‑coated carbide grade (AH120) and a 60° triangle geometry for reliable chip control and repeatable edge life; order the TNMG270616 AH120 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMG270616 AH120 TNMG indexable turning insert for Turning by Tungaloy — PVD‑coated carbide, 60° triangle A TNMG270616 AH120 indexable insert designed for external and internal turning where a sharp cutting edge, process security and stable chip control are required PVD‑coated carbide for high wear resistance ISO triangle 27 mm with 60° cutting geometry Double‑sided chipbreaker for stable chip control Cylindrical hole, 6.35 mm thickness for secure clamping Engineered for consistent turning performance The insert is based on a PVD‑coated carbide grade intended to deliver wear‑ and chipping resistance during continuous turning operations. The AH120 grade was developed for applications where a sharp, durable edge and process security are priorities; this reduces edge damage and maintains surface finish over longer tool life. The coating enhances heat tolerance and adhesion, which permits sustained cutting speeds and improves repeatability in batch production. With a clear focus on measurable outcomes, the result is fewer tool changes and more predictable cycle times, benefitting production planning and cost control. Secure clamping and ISO compatibility that reduces setup risk Designed to the ISO indexable insert family, the triangular TNMG form with a 27 mm inscribed circle and 60° included angle provides a familiar geometry that fits common external holders and boring bars when the holder form, relief angle and tolerance class match. The insert’s cylindrical hole and a plate thickness of 6.35 mm ensure confident clamping and repeatable positioning, reducing vibrations and the risk of misalignment in the interface. The 1.6 mm corner radius provides a balance between edge strength and achievable surface finish, helping to avoid premature edge breakouts while maintaining dimensional control for turned components. Application range and reliable process results This grade and geometry suit a wide range of turning tasks: external and internal turning across diverse steels and allied materials where a stable cutting edge is required. The double‑sided chipbreaker supports consistent chip formation and evacuation, which is particularly advantageous in medium‑to‑stable setups and when reproducible chip control is essential for automated or multi‑part cycles. Selecting the correct chipbreaker and grade according to workpiece material and machining stability ensures the most economical operation with predictable tool life. Overall, the insert supports productivity gains through fewer interruptions, improved surface quality and dependable performance under typical shopfloor conditions. For process‑reliable turning with Tungaloy PVD‑coated carbide, contact Metav Werkzeuge for availability and application advice: info@metav-werkzeuge.com | +49 2822 7131930 — Metav Werkzeuge can support selection and delivery of the TNMG270616 AH120 insert Technical data Article number: 6852037 Facts Manufacturer SKU: TUN6852037 Merchant SKU: 6852037-Tungaloy Material: carbide Design and special features ISO indexable turning insert, triangular TNMG form Grade: AH120, PVD‑coated Double‑sided chipbreaker Cylindrical centre hole for clamping Plate size: 27 mm inscribed circle Plate thickness: 6.35 mm Corner radius: 1.6 mm Relief angle: 0° Included angle: 60° Application: Turning (external and internal) Model series: ISO turning indexable inserts FAQ What materials is this insert suited for? The TNMG270616 AH120 insert with its PVD‑coated carbide is suitable for a wide range of turning operations and performs well on steels and similar materials where wear resistance and a sharp edge are required. How does the chipbreaker affect machining stability? The double‑sided chipbreaker on this insert promotes controlled chip formation and evacuation, improving stability and surface finish in repetitive turning cycles. Will this insert fit my existing TNMG holder? Compatibility depends on holder form, relief angle, tolerance class, fastening and plate thickness; the TNMG270616 follows ISO dimensions, so it will fit holders that match those ISO specifications. Can the insert be used on internal turning applications? Yes, the triangular TNMG form and secure clamping via the cylindrical hole make it suitable for both external and internal turning when the chosen holder provides adequate support and stability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TNMM 160402 DX120 Wendeplatten - Tungaloy
Die Kombination aus sehr hoher Schnittgeschwindigkeit, langer Standzeit und ISO‑konformer Form sorgt für durchgehend produktive Zerspanungsprozesse. Entscheiden Sie sich für die PCD‑Sorte DX120 und sichern Sie sich robuste Performance bei der Bearbeitung von Aluminium und anderen Nichteisenmetallen. Bestellungen oder technische Rückfragen gerne direkt über Metav Werkzeuge oder an die Beratungsstelle richten. TNMM 160402 DX120 — ISO indexable turning insert, PCD grade for high‑speed aluminium turning (Tungaloy) A TNMM 160402 DX120 ISO indexable turning insert intended for high‑speed external and internal turning of aluminium and other non‑ferrous materials, featuring a triangular geometry and PCD cutting grade for extended tool life PCD grade DX120 for high cutting speeds Triangular ISO insert, 16 mm size Cylindrical‑hole clamping for secure fixing Very long tool life on aluminium alloys Achieve faster, more productive turning with PCD DX120 The PCD cutting material DX120 combines extreme hardness with thermal stability to enable high cutting speeds and consistent results when machining aluminium and abrasive non‑ferrous materials. As an ISO indexable insert in the TNMM format, the design focuses on maintaining cutting edge integrity under continuous loads; this reduces tool change frequency and increases overall throughput. The result is measurable productivity gains where cycle time and surface quality matter most. Reliable seating and repeatable set‑up reduce downtime Compatibility within the ISO insert system is governed by form, clearance angle (0°), tolerance class, fastening method, size and thickness. The triangular geometry with a 60° included angle and 16 mm inscribed circle offers a classic, stable fit for many external holders and boring bars. A cylindrical hole ensures reproducible clamping, while the standardised dimensions let spare parts and replacement inserts be stocked with confidence, shortening machine downtime and simplifying tool management. Improved surface finish and edge strength through controlled geometry A corner radius of 0.2 mm balances edge strength and achievable surface quality: the small radius supports fine finishing passes while still tolerating interrupted cuts typical in turning operations. The integrated DIA chipbreaker geometry works in concert with the PCD layer to control chip formation and evacuation, particularly on soft, gummy alloys and abrasive non‑metals. The outcome is a stable machining process with fewer edge‑related interruptions and a predictable component finish. Simple integration into existing tool systems and clear application guidance The insert is part of the ISO indexable turning system and is used together with a compatible external holder or boring bar, plus a shim/clamping set and replacement screws as required by the toolholder design. Material suitability is straightforward: designed primarily for aluminium, non‑ferrous metals and abrasive non‑metals, the grade offers very long tool life under appropriate cutting conditions. If uncertainty remains about holder compatibility or process parameters, Metav Werkzeuge provides technical advice and application support; general enquiries can be sent to info@metav-werkzeuge.com or by telephone on +49 2822 7131930. Contact Metav Werkzeuge for dedicated application advice on Tungaloy PCD inserts and secure TNMM 160402 DX120 replacements; reach our specialists at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6822169 SKU: 6822169-Tungaloy Manufacturer SKU: TUN6822169 Model series: ISO indexable turning inserts Core technical data Insert designation: TNMM160402-DIA Cutting material: PCD (polykristalliner Diamant), grade DX120 Inscribed circle / size: 16 mm Thickness: 4.76 mm Corner radius: 0.2 mm Clearance angle: 0° Included angle: 60° Hole: cylindrical hole Special features Triangular insert form Chipbreaker: DIA Application: Turning of aluminium, non‑ferrous and abrasive non‑metals Very long tool life under high cutting speeds Compatible with ISO holders, shims and clamping sets Material (substrate): cemented carbide FAQ Which materials is the insert suitable for? The TNMM 160402 DX120 insert is engineered for aluminium, non‑ferrous alloys and abrasive non‑metallic materials; the DX120 PCD grade provides the hardness and wear resistance needed for these applications. How does one ensure holder compatibility? Compatibility is determined by the insert form, clearance angle (0°), tolerance class, fastening type, size (16 mm) and thickness (4.76 mm); matching an ISO TNMM seat and a cylindrical‑hole clamping system guarantees proper fit for this Tungaloy insert. What are the main benefits of the PCD grade DX120? DX120 offers very long tool life and excellent performance at high cutting speeds, especially when machining abrasive or soft non‑ferrous materials where carbide tools wear rapidly. Can this insert be used for internal as well as external turning? Yes, the ISO TNMM format and the triangular geometry make the insert suitable for both external and internal turning operations when paired with the appropriate holder or boring bar. What role does the corner radius play in finish and strength? The 0.2 mm corner radius provides a compromise between edge robustness and achievable surface finish, helping to maintain edge life while enabling fine finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMM 160404 DX120 Wendeplatten - Tungaloy
Achieve high‑speed turning of aluminium and non‑ferrous materials with the PCD DX120 grade for extended cutting life and consistent surface quality; the triangular 60° geometry and 0.4 mm corner radius deliver stable engagement and precise profiles. Order the insert directly via Metav Werkzeuge or consult our technical advisors for holder compatibility and process optimisation. TNMM 160404 DX120 — Tungaloy indexable turning insert, PCD, 60° TNMM 160404 DX120 is an ISO‑standard triangular indexable insert designed for high‑speed external and internal turning of aluminium, non‑ferrous metals and abrasive non‑metallic materials. Polycrystalline diamond (PCD) cutting edge Triangular 60° geometry for versatile turning 0.4 mm corner radius for fine profile control High‑speed performance and long tool life The polycrystalline diamond grade DX120 offers exceptional wear resistance and thermal stability, enabling much higher cutting speeds than conventional carbide grades when machining non‑ferrous materials. Thanks to the PCD cutting layer, the insert sustains consistent edge geometry over long production runs, which reduces downtime for tool changes and maintains surface integrity on workpieces. This results in measurable productivity gains and less frequent re‑grinding in continuous turning operations. Precise geometry for reliable finishes The triangular 60° shape combined with a 0.4 mm corner radius provides stable cutting engagement and predictable chip formation for profile and detail work. The insert’s 0° relief angle and cylindrical hole fastening ensure secure mounting and repeatable positioning in compatible holders. Such geometry supports controlled cutting forces, leading to improved dimensional accuracy and surface finish in both external and internal turning tasks. Compatibility and process guidance Compatibility with a lathe holder depends on insert form, relief angle, tolerance class, fastening method, size and thickness. The TNMM designation and ISO code 160404 indicate the form and size, while the substrate material (carbide) and PCD top layer define the cutting behaviour. Select an appropriate chipbreaker and grade according to workpiece material and machine stability to exploit the DX120 advantages fully. For special applications or uncertain holder fits, a brief compatibility check with tooling data sheets is recommended. Practical benefits in production Using a PCD‑tipped indexable plate for aluminium and other non‑ferrous alloys increases process reliability and reduces overall tooling costs by extending tool life and lowering scrap rates. The DIA chipbreaker is tailored for non‑ferrous machining to improve chip control and reduce built‑up edge. These attributes make the insert particularly effective in high‑volume turning where repeatability and minimal intervention are priorities. For process optimisation with Tungaloy PCD technology and to confirm holder compatibility, contact Metav Werkzeuge for ordering and expert advice at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6822170 Manufacturer SKU: TUN6822170 Model series: ISO turning indexable inserts Facts Angle: 60° Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 0° Hole: with cylindrical hole Special features Grade: DX120 Cutting material: polycrystalline diamond (PCD) Substrate: carbide Chipbreaker: DIA Plate form: triangular Application: turning (external and internal) Compatible with ISO‑standard holders, check form and tolerance class FAQ What materials is this insert intended for? The TNMM 160404‑DIA DX120 Tungaloy indexable insert is intended primarily for aluminium, other non‑ferrous metals and abrasive non‑metallic materials, where PCD cutting edges give long tool life. Can this insert be used for steel machining? No, PCD grades such as DX120 are not suitable for steel; the TNMM insert is optimised for non‑ferrous materials and abrasive non‑metals and may wear rapidly on ferrous alloys. How is the insert secured in the holder? The insert features a cylindrical hole for fastening; correct holder selection must match the TNMM form, 0° relief, size and thickness for secure and repeatable mounting. What benefit does the 0.4 mm corner radius provide? A 0.4 mm corner radius balances profile definition and edge strength, improving finish quality while maintaining resistance to chipping in finishing operations. Is the DX120 grade better than carbide for aluminium? For many aluminium applications, DX120 PCD offers superior wear resistance and higher cutting speeds compared with carbide, resulting in longer tool life and improved surface consistency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMM 160408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade and a secure 60° triangular fit for consistent, productive turning results; order original Tungaloy inserts via Metav Werkzeuge or request cutting-data advice from our specialists. TNMM160408-57 T9225 TNMM 160408 turning insert, CVD-coated carbide, 60° (Tungaloy) TNMM160408-57 T9225 is an ISO-standard indexable insert designed for medium to heavy turning applications, offering robust edge strength and reliable chip control in variable cutting conditions. Robust CVD-coated carbide for medium to heavy turning 60° triangular geometry for versatile toolholder fit Cylindrical hole for secure clamp mounting 0.8 mm corner radius for improved edge strength Optimised cutting performance for demanding turning tasks The TNMM160408-57 T9225 insert combines a CVD-coated surface with a tough carbide substrate to deliver predictable performance when machining steel under mixed conditions. The T9225 grade is formulated for high stability and good wear resistance, which translates into fewer tool changes and steadier cycle times. Chip formation is controlled by the integrated chipbreaker, reducing the risk of re-cutting and facilitating automated swarf removal. This technical combination supports continuous production where interrupted cuts or variable engagement demand extra toughness. Secure seating and precise geometry for stable production A triangular insert with a 60° lead angle and a cylindrical hole offers a repeatable clamping interface that reduces vibration and runout in the toolholder. Compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness; selecting a matching 60° holder and appropriate clamping set ensures the intended performance. The insert's 0° relief and ISO conformity permit straightforward replacement in standard external and internal turning tool systems, fostering predictable tool life and part quality in serial production. Extended tool life and process economy through design choices The 0.8 mm corner radius increases edge robustness for heavier depths of cut while the CVD-coated surface improves resistance to abrasive wear and built-up edge when machining alloyed and plain steels. These attributes reduce downtime associated with frequent index changes and support a better cost-in-use ratio across medium-to-long production runs. The dedicated chipbreaker (designation 57) is tuned for steady chip flow in the intended material range, which helps to maintain consistent surface finish and minimise secondary operations. Practical guidance for application and handling As an ISO indexable insert intended for turning, the TNMM160408-57 performs best when matched to the correct holder geometry and clamping torque; a secure clamping set and correct screw specification are essential for repeatable results. Choose the T9225 grade and chipbreaker combination according to workpiece material, machine rigidity and feed rate to balance wear and cutting forces. For those working across component families, this insert offers a versatile solution that simplifies inventory while delivering dependable performance in both external and internal turning operations. Contact Metav Werkzeuge for tailored cutting parameters, availability of original Tungaloy inserts and hands-on advice by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6780773 Manufacturer SKU: TUN6780773 Seller SKU: 6780773-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TNMM160408-57 Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included hole: yes (cylindrical) Lead angle: 60° Relief angle: 0° Chipbreaker: 57 Special features Grade/coating: T9225 (CVD-coated) Material: carbide Shape: triangular Application: turning (external/internal) ISO-compliant insert Compatible with suitable 60° holders and clamping sets FAQ What materials is this insert suitable for? The TNMM160408-57 T9225 insert is optimised for steel machining and performs well in medium to heavy turning of alloyed and plain steels, thanks to its T9225 CVD-coated carbide grade. Which holders are compatible with this triangular insert? Compatibility depends on holder form, relief angle and tolerance class; the 60° geometry of this triangular insert is compatible with standard 60° turning holders that accept ISO TNMM-form inserts. How does the chipbreaker designation affect performance? The chipbreaker 57 is designed for controlled chip formation under the intended feed and depth-of-cut ranges, improving swarf evacuation and surface finish when using the T9225 grade in turning operations. Is the insert supplied with a through-hole for clamping? Yes — the insert is supplied with a cylindrical hole for secure clamping and repeatable seating in compatible clamping sets. Can this insert be used for interrupted cuts? The T9225 grade provides enhanced toughness, making the insert suitable for applications with light interruption or variable engagement where a more robust edge is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMM 220408 T9225 Wendeplatten - Tungaloy
Take advantage of robust CVD-coated carbide in a universally applicable grade and the rigid 60° triangular geometry for dependable medium-to-heavy turning; order directly via Metav Werkzeuge or ask the consultants for tailored cutting data. TNMM 220408 T9225 – ISO turning insert (CVD-coated carbide, 60°) by Tungaloy TNMM 220408 T9225 is an ISO-standard triangular turning insert developed for medium to heavy steel machining, combining a tough CVD-coated carbide grade with a chipbreaker suited to variable and lightly interrupted cuts. CVD-coated carbide grade T9225 Triangular insert with 60° cutting edge 0° clearance angle for enhanced rigidity Optimised for medium to heavy steel turning Durable grade for changing and demanding cuts The T9225 grade offers a CVD-coated, carbide substrate designed as a robust universal solution for turning tasks where cutting conditions vary or slight interruptions occur. The combination of coating and substrate delivers increased toughness compared with some purely wear-focused grades, which means fewer insert failures under fluctuating loads and a more reliable production rhythm. With the chipbreaker 57 matched to the grade, chip formation is stabilised for a broad range of steels, reducing rework and supporting consistent component quality. Rigid geometry for precision and repeatability A triangular outline with a 60° cutting geometry provides three usable cutting corners and good access for a variety of external and internal turning setups. The specified corner radius of 0.8 mm and a plate thickness of 4.76 mm contribute to cutting edge stability, while the 0° clearance angle supports high rigidity at the cutting zone. The insert’s cylindrical hole ensures positive clamping and repeatable seating in the cartridge or holder, which improves surface finish consistency and extends the usable life of both insert and tool body. System compatibility that reduces downtime Supplied as part of an ISO insert system, the plate is matched to external holders or boring bars together with the appropriate shim or clamp set and replacement screws. Compatibility is driven by the insert form, clearance angle, tolerance class, fastening type, size and thickness, so choosing the correct holder ensures secure clamping and minimal changeover times. The standardised format simplifies stock control and enables quick insert changes to maintain machine uptime and throughput. Application guidance for reliable productivity The insert is primarily intended for medium to heavy steel turning and is suitable for interrupted cuts thanks to its tougher substrate and chip control geometry. Selection of feed and speed should reflect component material, machine rigidity and coolant strategy; the grade’s balanced wear resistance and fracture strength promotes longer tool life and steady productivity in batch production and single-piece flows alike. For specialised alloys or non-steel materials, consult technical data to match chipbreaker and grade to the application. Specify the TNMM220408-57 T9225 for demanding turning tasks and contact Metav Werkzeuge for availability, cutting data and application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6780724 Manufacturer SKU: TUN6780724 SKU: 6780724-Tungaloy Name: TNMM220408-57 T9225 Tungaloy insert Model series: ISO turning inserts Application: Turning Manufacturer: Tungaloy Facts Insert size: 22 mm Thickness: 4.76 mm Corner radius: 0.8 mm Cutting angle: 60° Clearance angle: 0° Chipbreaker: 57 Special features Shape: triangular Hole: with cylindrical hole Substrate: carbide Coating/grade: CVD-coated, T9225 Suitable for: medium to heavy steel machining, interrupted cuts Compatibility: ISO form; holder/clamp dependent FAQ Which materials is this insert intended for? The TNMM220408-57 T9225 insert is formulated for medium to heavy steel machining, providing a balance of wear resistance and toughness that suits general steel turning applications. What are the key geometry specifications of the insert? The insert has a 60° cutting geometry, a corner radius of 0.8 mm, a thickness of 4.76 mm and a 0° clearance angle, all of which contribute to rigidity and repeatable seating. How is holder compatibility determined for this ISO insert? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; correct matching to the external holder or boring bar ensures secure clamping and consistent performance with the TNMM220408-57. Is this grade suitable for interrupted or variable cuts? Yes—the T9225 CVD-coated grade and chipbreaker 57 are selected to tolerate changing engagement conditions and light interruptions while maintaining chip control. What components are needed for a complete tool setup? A complete system comprises the ISO insert plus an appropriate external holder or boring bar, an underlay/shim or clamping set and replacement screws to secure the insert reliably. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMM 220412 T9225 Wendeplatten - Tungaloy
Take advantage of robust CVD-coated carbide, a 60° triangular geometry and a 1.2 mm corner radius for reliable performance in medium to heavy steel turning; order original Tungaloy inserts via Metav Werkzeuge or consult the technical sales team for application-specific advice. TNMM 220412 T9225 — Tungaloy turning insert (triangular, 60°) TNMM220412-57 T9225 is an ISO-standard triangular turning insert designed for external and internal turning in steel, delivering a balance of toughness and wear resistance for variable cutting conditions. CVD-coated carbide grade T9225 Robust for medium to heavy steel turning 60° triangular insert with 1.2 mm radius Compatible with ISO turning holders Long-life performance for variable steel turning The CVD-coated carbide composition of the insert provides a durable cutting edge suitable for medium to heavy steel operations where intermittent cuts or changing engagement demand increased toughness. The T9225 grade is formulated as a universal, robust option that maintains edge stability when chip loads vary, reducing the frequency of tool changes and supporting consistent cycle times. This results in improved uptime and a clearer return on machining productivity when processing demanding workpieces. Geometry and fit that reduce set-up complexity A 60° triangular shape with a 1.2 mm corner radius and a plate thickness of 4.76 mm offers straightforward accommodation in a wide range of ISO holders; the 0° relief angle supports predictable cutting forces and accessible toolpath clearance. The insert’s cylindrical hole fixing provides secure clamping and repeatable seating, which simplifies toolholder selection and reduces set-up variations. For shops seeking reliable interchangeability, the ISO designation ensures compatibility across standardized clamping systems. Predictable chip control and system integration The integrated chipbreaker designation 57 works in concert with the grade and the substrate to manage chip form during common turning operations. Combined with a matching external holder and correct clamping torque, the system helps to maintain stable chip flow and protect the cutting edge under fluctuating conditions. The complete system approach — insert, holder, shim and clamping screw — supports consistent component quality and reduces secondary operations associated with poor chip evacuation. Practical application guidance and economic benefit Designed for turning applications, the insert is recommended for both external and internal operations in steel where a balance of wear resistance and edge toughness is required. Selecting the appropriate chipbreaker and ensuring machine-tool rigidity will extend tool life and enhance surface finish. Over successive operations, the reduced downtime for insert changes and predictable tool life contribute to lower total machining costs and more reliable delivery of finished parts. Contact Metav Werkzeuge for tailored application advice on Tungaloy turning inserts; our technical team can recommend the optimal holder and chipbreaker combination — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780814 Manufacturer SKU: TUN6780814 Our SKU: 6780814-Tungaloy Model series: ISO turning inserts Material: carbide Facts Geometry angle: 60° Corner radius: 1.2 mm Plate thickness: 4.76 mm Insert size: 22 Relief angle: 0° Chipbreaker: 57 Design and special features Shape: triangular Hole: with hole Hole style: cylindrical hole Grade: T9225 Coating/type: CVD-coated carbide Typical application: external and internal turning FAQ Is this insert suitable for interrupted cuts in steel? The TNMM220412-57 T9225 insert from Tungaloy is designed as a robust universal grade and is suitable for interrupted or variable engagement cutting in medium to heavy steel. What holders are compatible with the insert? Compatibility is determined by ISO form, clearance angle, tolerance class, fixation and plate thickness; the TNMM 220412 designation matches standard ISO turning holders for triangular inserts. How does the chipbreaker 57 influence performance? Chipbreaker 57 is engineered to promote stable chip formation with this grade and geometry, supporting consistent evacuation and protecting the cutting edge during general turning operations. Can this insert be used for internal turning? Yes; the insert’s triangular 60° geometry and secure cylindrical-hole fixing make it suitable for both external and internal turning when paired with an appropriate boring bar or holder. What does the T9225 grade offer compared with standard grades? T9225 is a CVD-coated carbide grade optimised for a broad range of steels, emphasising toughness and wear resistance for reliable performance under changing cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 070304 AH120 Wendeplatten - Tungaloy
Benefit from a PVD-coated AH120 carbide grade, a secure 3.18 mm plate thickness and a 60° geometry that deliver process-stable milling performance; order matching inserts directly via Metav Werkzeuge or consult our technical advisers for compatibility and application guidance. TNMU 070304 AH120 triangular indexable insert for milling (Tungaloy) TNMU070304 AH120 is a triangular indexable insert for milling systems, intended for plan, shoulder, groove, high-feed and contour operations when used in a matching milling body. PVD-coated carbide grade AH120 Triangle indexable insert, size 07 Plate thickness 3.18 mm for secure clamping 60° cutting angle and 0.4 mm corner radius Consistent cutting-edge performance for stable production The triangular indexable insert is designed to support process reliability in milling applications where a sharp edge and consistent results are required. The PVD coating on the carbide substrate improves wear resistance while preserving a defined cutting geometry, which helps to maintain surface quality and dimensional stability over repeated indexings. For users integrating this insert into compatible milling bodies, the combination of coating and substrate reduces the frequency of index changes, supporting uninterrupted production cycles. Secure seating and adaptable clamping for safe operation A secure clamping interface is essential for safe, repeatable milling. This insert features a cylindrical hole with a double-sided countersink (40°–60°) and a 3.18 mm plate thickness, providing a rigid seat when used with the correct clamping screw and, where applicable, a locating shim. The triangle form offers multiple indexable edges, enabling economical use of each insert while the 0.4 mm corner radius balances edge strength with the ability to produce accurate contour and shoulder geometries. Optimised grade for demanding milling conditions The AH120 grade is a PVD-coated, wear- and breakage-resistant specification developed for milling tasks that demand a sharp cutting edge together with reliable tool life. In practice, this grade supports a wide range of operations—planing, shoulder, grooving, high-feed and contour milling—provided the insert seat, geometry and tool body are matched. The 60° geometry contributes to efficient chip control and engagement angles suitable for many common milling strategies, helping to reduce tool-related process variation. For genuine Tungaloy TNMU 070304 AH120 inserts and expert advice on compatibility with existing milling systems, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our team will assist with selection and logistics. Technical data Article number: 6776470 SKU: 6776470-Tungaloy Manufacturer SKU: TUN6776470 Manufacturer article number: 6776470 Facts Insert designation: TNMU070304 Size: 07 Plate thickness: 3.18 mm Corner radius: 0.4 mm Cutting angle: 60° Clearance angle: 0° Hole style: cylindrical hole + double-sided countersink (40°–60°) Special features PVD-coated carbide substrate (AH120) Triangle indexable insert Double-sided chipbreaker With hole for clamping screw Application: milling (plan, shoulder, groove, high-feed, contour depending on tool family) FAQ What milling applications is this insert suited for? The TNMU070304 AH120 Tungaloy indexable insert is intended for a range of milling tasks including plan, shoulder, groove, high-feed and contour milling when used in a compatible milling body. How is the insert secured in the tool body? The TNMU070304 AH120 insert is located and clamped via its cylindrical hole and double-sided countersink; the 3.18 mm plate thickness contributes to a stable clamping seat when used with the correct screw and support parts. What advantages does the AH120 grade offer? AH120 is a PVD-coated carbide grade that combines wear resistance with edge stability, making the insert suitable where a sharp cutting edge and high process reliability are required. Does the triangular shape provide multiple indexable edges? Yes, the triangular form of the insert provides multiple indexable cutting edges, allowing economical use of the insert across successive indexings. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 070304 AH3135 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide and a 60° triangular geometry for reliable, productive milling; order the TNMU070304 AH3135 directly via Metav Werkzeuge or consult our specialists for process integration. TNMU 070304 AH3135 TNMU070304 indexable insert for milling by Tungaloy — PVD-coated carbide, 60° The TNMU070304 AH3135 is a triangular indexable insert designed for face, shoulder and high-feed milling in Tungaloy milling systems, offering a secure clamping interface and predictable cutting behaviour. PVD-coated carbide for wear resistance Double-sided chipbreaker for stable chips 60° insert geometry for versatile milling Triangular shape with 0.4 mm corner radius Countersunk hole for secure clamping Consistent cutting performance and process reliability The insert combines a PVD-coated surface with a wear-resistant carbide substrate, giving a balance between edge strength and longevity that supports stable production cycles. The AH3135 grade is formulated to resist both wear and chipping, which reduces unplanned tool changes and contributes to a predictable tool-life. In practice, the double-sided chipbreaker controls chip formation across a range of feeds, so machining forces remain consistent and surface finish requirements are met without excessive manual adjustments. Secure clamping and system compatibility for efficient changeovers Designed with a centrally located hole and a cylindrical hole with double-sided countersink (40°–60°), the insert ensures a secure mechanical seat within compatible milling bodies. The 60° geometry and triangular insert form provide multiple indexed cutting edges per insert, enabling quick rotation and efficient use of each insert. The 3.18 mm thickness and corner radius 0.4 mm support robust clamping and predictable contact conditions, simplifying set-up and minimising downtime when integrating the part into existing Tungaloy milling systems. Application range and material adaptability Optimised for a variety of milling tasks, the insert is suitable for planing, shoulder, slot, high-feed and contour milling depending on the chosen cutter body. The AH3135 coating performs well across common engineering materials encountered in machining, delivering a compromise between edge sharpness and wear resistance that is particularly useful when process security is prioritised over maximum speed. Where consistent surface quality and repeatable performance are required, this grade offers a dependable solution that reduces scrap and rework. For tailored advice on integrating the TNMU070304 AH3135 into production or for availability inquiries, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with selection and supply. Technical data Article number: 6776469 Manufacturer SKU: TUN6776469 Product name: TNMU070304 AH3135 Model series: Fräswendeschneidplatten Application: Fräsen Facts ISO code: 070304 Insert size: 07 Thickness: 3.18 mm Cutting angle: 60° Corner radius: 0.4 mm Relief angle: 0° Countersink angle: 40°–60° Special features Material: carbide Coating / grade: AH3135 (PVD-coated) Shape: triangular Hole style: cylindrical hole with double-sided countersink Chipbreaker: double-sided Sidedness: indexable, multiple cutting edges Compatible with: Tungaloy milling systems FAQ What milling tasks is this insert best suited to? The TNMU070304 AH3135 insert is intended for face, shoulder, slot, high-feed and contour milling in compatible Tungaloy milling systems, offering a balance of edge life and chip control for these operations. How does the AH3135 grade improve process security? AH3135 is a PVD-coated carbide grade engineered to resist wear and chipping; when used in the TNMU070304 it delivers stable cutting edges and predictable tool life, which supports repeatable machining results. Can this insert be used in non-Tungaloy cutter bodies? Dimensional and seating compatibility must be confirmed; the insert’s seat, geometry and clamping must technically match the cutter body, otherwise use within Tungaloy systems is recommended. How many cutting edges are available per insert? The triangular form provides multiple indexable edges; the exact number of usable edges depends on the applied cutting parameters and wear monitoring of the TNMU070304 AH3135. What are the key features to check when replacing existing inserts? Verify ISO code 070304, thickness 3.18 mm, hole and countersink style, corner radius 0.4 mm and the AH3135 PVD-coated carbide specification to ensure compatibility and the expected cutting behaviour. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 070304 AH3225 Wendeplatten - Tungaloy
Combine the PVD-coated carbide durability with a stable 60° geometry for reliable milling performance; ideal for planing, shoulder and contour operations. Order the TNMU070304 AH3225 insert directly via Metav Werkzeuge or consult our advisors for application support. TNMU 070304 AH3225 TNMU070304 — Tungaloy indexable milling insert, PVD-coated carbide, 60° A TNMU070304 AH3225 indexable insert designed for milling operations in compatible Tungaloy milling systems, offering a sharp cutting edge and robust process security. PVD-coated carbide grade AH3225 Triangular form for three cutting edges Double-sided chipbreaker for stable chips Precision geometry for consistent cutting performance The insert delivers a defined 60° cutting geometry and a 0.4 mm corner radius, which together ensure predictable engagement with the workpiece and uniform tool life. The triangular shape provides multiple usable edges per insert, reducing tool changes and maintaining production continuity. The insert’s double-sided chipbreaker supports controlled chip formation across planing, shoulder and slot milling, translating into consistent surface finish and fewer interruptions during machining. Durable PVD-coated carbide for dependable edge retention Manufactured from carbide and finished with a PVD coating, the grade AH3225 is optimised for wear resistance and fracture toughness under typical milling loads. This combination preserves a sharp cutting edge and extends the interval between indexings, benefiting cycle-time efficiency and lowering tooling consumption in the long run. Where process security and a resilient cutting edge are required, this grade offers a balanced solution between longevity and cutting performance. System compatibility and practical mounting features The insert is intended for use in Tungaloy milling systems: correct match of insert seat, geometry and cutter body is essential for secure clamping and repeatable results. It is supplied with a hole, featuring a cylindrical bore plus a double-sided countersink (40°–60°), allowing reliable location and clamping in appropriately designed cutters. The 3.18 mm thickness and triangular form deliver mechanical stability that supports higher feed rates without compromising the insert’s integrity. Versatility across milling tasks and straightforward logistics Suitable for face, shoulder, slot, high-feed and contour milling, the insert adapts to a wide range of machining tasks depending on the assigned cutter family. The combination of a compact corner radius and robust grade makes it suitable for operations where a fine edge and process reliability are required. Supplied under SKU 6824035-Tungaloy, the component is straightforward to order and integrate into existing tool inventories, simplifying procurement and inventory control. For precise milling solutions using Tungaloy performance, contact Metav Werkzeuge for tailored advice and procurement — eMail: info@metav-werkzeuge.com or phone +49 2822 7131930. Technical Data Article number: 6824035 SKU: 6824035-Tungaloy Manufacturer SKU: TUN6824035 ISO designation: 070304 Name: TNMU070304 AH3225 Model series: Fräswendeschneidplatten Shape: triangular Grade/coating: AH3225, PVD-coated carbide Material: carbide Insert hole: with hole; cylindrical hole + double-sided countersink (40°–60°) Clearance angle: 0° Cutting edge angle: 60° Thickness: 3.18 mm Corner radius: 0.4 mm Chipbreaker: double-sided Core data Corner radius: 0.4 mm Thickness: 3.18 mm Cutting angle: 60° Countersink angle: 40°–60° Size designation: 07 Special features Triangular insert form Double-sided chipbreaker PVD-coated carbide grade AH3225 Compatible with Tungaloy milling bodies Designed for face, shoulder, slot, high-feed and contour milling Secure clamping via central hole and countersink FAQ What applications is this insert suited for? The TNMU070304 AH3225 Tungaloy indexable milling insert is suitable for face, shoulder, slot, high-feed and contour milling when used in matching Tungaloy cutter bodies. How many usable edges does the triangular insert provide? The triangular form supplies three cutting edges; the insert can be indexed to present a fresh edge as required, extending overall tool life. What does the AH3225 designation indicate? AH3225 denotes a PVD-coated carbide grade optimised for wear resistance and fracture strength, offering a sharp edge and process security in milling. Is the insert compatible with any milling body? The insert requires a milling cutter whose seat, geometry and clamping method are technically matched to the TNMU070304 specification for safe and repeatable performance. What clamping features are provided? The insert is fitted with a central hole plus a cylindrical bore and a double-sided countersink (40°–60°) to ensure correct seating and secure clamping in compatible cutter designs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 070308 AH120 Wendeplatten - Tungaloy
High wear resistance and process-stable cutting performance combine with precise 60° geometry and a 0.8 mm corner radius to deliver consistent milling results; the PVD-coated carbide grade AH120 offers reliable edge life and fracture resistance. Order the TNMU070308 AH120 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TNMU070308 AH120 Tungaloy indexable insert for milling — PVD-coated carbide, 60° A TNMU070308 AH120 indexable insert engineered for Tungaloy milling systems, optimised for face, shoulder, slot, high-feed and contour milling. PVD-coated carbide for high wear resistance 60° triangular geometry for versatile milling 0.8 mm corner radius for accurate edge control Cylindrical hole with double countersink 40°–60° Consistent cutting life through optimised coating and grade The PVD-coated carbide composition in this insert is developed for wear resistance and resistance to edge chipping, offering a stable machining window for interrupted and continuous cuts. The AH120 grade provides a balance between hardness and toughness, which reduces unplanned insert changes and keeps cycle times steady. For production environments where predictable tool life and repeatable results matter, the coated cemented carbide reduces downtime and supports higher process reliability. Geometry that improves versatility and surface quality With a 60° geometry and a triangular form, the insert enables multiple edge indexing options, extending usable life per insert. The 0.8 mm corner radius assists in achieving defined edge strength while maintaining good surface finish on shoulders and faces. The double-sided chipbreaker geometry helps control chip formation in a range of feed and depth settings, which simplifies parameter selection and reduces the risk of surface damage. These features together support both roughing and finishing passes with minimal compromise. Secure seating and easy clamping for system compatibility The insert is supplied with a cylindrical hole and a double-sided countersink (40°–60°), allowing straightforward mounting in compatible Tungaloy milling bodies. Correct match between insert seat, geometry and cutter body is essential; this specification ensures mechanical stability and repeatable clamping torque. The relatively slim 3.18 mm plate thickness reduces projection while maintaining sufficient rigidity for high-feed operations, provided the toolholder and assembly adhere to the system’s technical requirements. Application spectrum and recommended use Designed primarily for milling, the insert suits face, shoulder, slot, high-feed and contour milling operations when paired with the corresponding Tungaloy cutter family. The AH120 variety is particularly suited where a sharp cutting edge and process security are required; its resistance to wear and edge breakouts makes it appropriate for mixed batch production and medium-duty continuous machining. When optimising cycle time, consider the insert’s chip control features and geometry to select feeds and speeds that preserve the edge and the workpiece finish. Contact Metav Werkzeuge to confirm toolholder compatibility for the TNMU070308 AH120 and arrange delivery or technical advice tailored to specific milling applications Technical data Article number: 6776468 Manufacturer SKU: TUN6776468 SKU: 6776468-Tungaloy Model series: Fräswendeschneidplatten ISO designation: 070308 Facts Geometry angle: 60° Corner radius: 0.8 mm Plate thickness: 3.18 mm Plate size: 07 Relief angle: 0° Hole type: with hole (cylindrical hole + double-sided countersink 40°–60°) Special features Material: carbide (cemented carbide) Coating / grade: AH120, PVD-coated carbide Plate shape: triangular Chipformer: double-sided chipbreaker Typical applications: face, shoulder, slot, high-feed and contour milling System requirements: exact match of insert seat, geometry and cutter body for secure clamping FAQ What milling operations is this insert suitable for? The TNMU070308 AH120 insert is intended for face, shoulder, slot, high-feed and contour milling when used in the corresponding Tungaloy milling system. How does the AH120 grade affect tool life? The AH120 PVD-coated carbide grade provides enhanced wear resistance and improved fracture toughness, which increases predictable tool life under a range of cutting conditions. Is the insert compatible with non-Tungaloy cutter bodies? Compatibility depends on exact seat geometry and clamping design; the insert requires a matching seat and secure clamping like those specified for Tungaloy milling systems. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm corner radius balances edge strength and finishing capability, helping to produce smooth shoulder and face surfaces while reducing the risk of edge chipping. How is the insert secured in the cutter? The insert features a cylindrical hole with a double-sided countersink (40°–60°) and must be clamped in a correctly matched cutter body to ensure mechanical stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 070308 AH3135 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide durability, a precise 60° triangular geometry and a 0.8 mm corner radius for stable, repeatable milling performance; order the TNMU070308 AH3135 indexable insert via Metav Werkzeuge or consult our specialists for process matching. TNMU 070308 AH3135 indexable milling insert — Tungaloy, PVD-coated carbide, 60° The TNMU070308 AH3135 is an indexable insert for Tungaloy milling systems, designed for face, shoulder, groove, high-feed and contour milling where a sharp cutting edge and process security are required. TNMU070308: triangular 60° insert, 0.8 mm radius PVD-coated carbide AH3135 for wear resistance Cylindrical hole with double countersink 40°–60° Double-sided chipbreaker for consistent chip control Stable machining across diverse milling tasks The AH3135 grade is a PVD-coated carbide developed for wear and chipping resistance, which supports longer tool life and steady performance in mixed-production environments. In practical terms, the coating reduces flank wear rates and helps maintain a sharp edge under fluctuating cutting conditions; this leads to fewer tool changes and more predictable cycle times. The insert’s suitability for face, shoulder, groove, high-feed and contour milling means it can standardise tooling across several operations, reducing inventory complexity while maintaining process reliability. Geometry engineered for secure seating and repeatability A triangular plate with a nominal 60° included angle and 0.8 mm corner radius provides a balance between edge strength and cutting definition. The geometry, combined with a 3.18 mm plate thickness and a cylindrical hole with a double-sided countersink, ensures precise seating and uniform clamping force when the correct clamping screw and seat geometry are used. This mechanical stability reduces vibration, improves surface finish and supports consistent dimensional outcomes on successive parts, which is essential for high-accuracy or high-volume production runs. Predictable chips and simplified process setup Integrated double-sided chipbreakers promote controlled chip formation over a wide range of cutting parameters, easing swarf evacuation and lowering the risk of re-cutting. The AH3135 grade’s resistance to chipping supports a reliably sharp cutting edge, which is particularly advantageous when machining interrupted cuts or mixed-material batches. As part of the full tool system — milling body, insert, clamping screw and, where applicable, backing pad — the component must be matched to the toolholder family to achieve the stated benefits. If unsure whether this insert meets specific requirements or additional technical data is needed, Metav Werkzeuge’s advisors are available to provide further guidance. Contact Metav Werkzeuge for availability and application advice on Tungaloy TNMU070308 AH3135 indexable inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6774144 Manufacturer SKU: TUN6774144 Label: TNMU070308 AH3135 Tungaloy-indexable insert Model series: Fräswendeschneidplatten Dimensions & measurable data Plate size: 07 Plate thickness: 3.18 mm Corner radius: 0.8 mm Included angle: 60° Hole: with hole; cylindrical hole + double countersink 40°–60° Materials & special features Material: carbide Coating: PVD Grade: AH3135 — wear- and chipping-resistant for milling Plate form: triangular Chipbreaker: double-sided Typical applications: face milling, shoulder milling, grooving, high-feed and contour milling System composition: milling body, indexable insert, clamping screw, optional backing pad Note: insert seat, geometry and milling body must match technically FAQ What milling operations is this insert suitable for? The TNMU070308 AH3135 indexable insert is suitable for face, shoulder, groove, high-feed and contour milling when used in compatible Tungaloy milling systems. Which materials can be machined with this grade? The AH3135 PVD-coated carbide grade is designed for a broad range of materials where wear resistance and chipping resistance are required; final parameter selection depends on the machined material and cutting conditions. How does the insert ensure secure clamping? The insert features a cylindrical hole with a double-sided countersink that, when combined with the correct clamping screw and matched seat geometry, delivers consistent clamping force and repeatable seating. What benefit does the double-sided chipbreaker provide? The double-sided chipbreaker promotes controlled chip formation across varied cutting parameters, optimising evacuation and reducing the risk of swarf-related process interruptions. Is the insert supplied ready to fit into standard Tungaloy milling bodies? The TNMU070308 AH3135 is produced for use with Tungaloy milling systems; seating, geometry and clamping elements must be technically compatible for correct integration. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 070308 AH3225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH3225 carbide for extended wear resistance and a 60° triangular geometry that ensures stable, repeatable milling results; order directly via Metav Werkzeuge or consult the technical team for application advice. TNMU 070308 AH3225 indexable milling insert — 60° triangular, PVD-coated, Tungaloy The TNMU070308 AH3225 is an indexable triangular milling insert designed for general milling operations in Tungaloy-compatible milling systems and intended for face, shoulder, slot, high-feed and contour milling. Triangle insert TNMU 070308, 60° cutting angle PVD-coated carbide grade AH3225 for wear resistance Double-sided chipbreaker for reliable chip control Cylindrical hole with double-sided countersink 40°–60° Consistent cutting performance through a wear-resistant coating The insert’s PVD-coated AH3225 grade combines a hard coating with a tough carbide substrate to balance wear resistance and edge strength. This composition reduces flank wear and lowers the frequency of tool changes, which promotes a more predictable process and higher uptime in production runs. The coating supports a sharp cutting edge, making the component especially suitable where both edge integrity and process security are required; the result is stable metal removal and uniform tool life across batches. Improved chip control and surface quality for reliable milling A double-sided chipbreaker on the triangular insert provides controlled chip formation under varying cutting conditions, which helps to avoid long, stringy chips and reduces the risk of surface damage. With the insert’s 60° geometry and a corner radius of 0.8 mm, the cutting mechanics favour a good balance between robustness and finish quality — beneficial for shoulder and contour applications where consistent surface integrity is essential. The chipbreaker design also eases evacuation in both climb and conventional milling strategies. Secure mounting and compatibility with Tungaloy milling bodies The component is supplied with a cylindrical hole and a double-sided countersink (40°–60°) to guarantee secure clamping with the corresponding Tungaloy cutter bodies; correct seat geometry and fastening hardware must match to achieve rated performance. The insert thickness of 3.18 mm and triangular form ensure straightforward indexing, while the combination of hole and countersink contributes to repeatable seating and minimised runout. Note that insert, screw and shim dimensions must be verified against the host toolholder before assembly. Application range and practical advantages on the shop floor Engineered for a broad spectrum of milling tasks, the triangular indexable geometry suits planing, shoulder milling, slotting, high-feed and contour operations depending on the cutter family selected. The grade’s resistance to chipping supports interrupted cuts and variable engagement conditions, offering process reliability when a sharp edge and consistent results are required. For shop-floor teams, the insert reduces setup variability and contributes to stable cycle times when properly matched to cutter bodies. Contact Metav Werkzeuge for expert guidance on integrating Tungaloy inserts into existing milling toolsets, availability of item TNMU070308 AH3225 and recommendations for optimal cutting parameters; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6824037 Manufacturer SKU: TUN6824037 WPL designation: TNMU070308 Grade: AH3225 Material: Carbide Facts Corner radius: 0.8 mm Thickness: 3.18 mm Insert size: 07 Relief angle: 0° Cutting angle: 60° Countersink angle: 40°–60° Special features PVD-coated carbide grade AH3225 Double-sided chipbreaker Triangular insert with cylindrical hole Compatible with Tungaloy milling bodies Application: milling — face, shoulder, slot, high-feed, contour FAQ What materials is this insert suitable for? The TNMU070308 AH3225 insert is a PVD-coated carbide grade designed primarily for robust milling applications where a sharp edge and process security are required; it performs well across a wide material range typical for milling, subject to toolholder and parameter selection. How does the double-sided chipbreaker affect performance? A double-sided chipbreaker provides controlled chip formation in both cutting directions, improving chip evacuation and reducing the likelihood of surface damage when using the TNMU070308 in face, shoulder or contour milling operations. Is the insert compatible with all Tungaloy milling bodies? Compatibility depends on matching the insert seat, geometry and clamping system: the TNMU070308 requires a Tungaloy-compatible seat designed for triangular inserts with a central hole and countersink. Ensure the cutter body specification corresponds to the insert dimensions before assembly. What advantages does the AH3225 grade provide in interrupted cuts? The AH3225 grade is formulated to resist chipping and maintain a sharp edge under varying engagement conditions, offering improved process reliability for interrupted cuts and where consistent edge integrity is necessary. How is the insert indexed and secured? Indexing is performed via the central cylindrical hole and countersink; correct fasteners and, if required, shims must be used to achieve repeatable seating and minimal runout with the corresponding milling body. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 120708 AH120 Wendeplatten - Tungaloy
Benefit from the TungMeister modular concept combined with the wear-resistant, PVD-coated AH120 cemented carbide to achieve reliable, high-quality milling with reduced insert turnover. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. TNMU 120708 AH120 Tungaloy indexable insert for milling — triangular 12 mm, 60° The TNMU 120708 AH120 is a triangular indexable insert designed for the TungMeister modular milling system, intended for shoulder, slot, face and contour milling with interchangeable heads and reusable shanks. TungMeister modular system compatible PVD-coated AH120 cemented carbide Sharp cutting edge for secure milling Triangular 12 mm insert, 0.8 mm radius Engineered for consistent edge life and process stability The modular insert is manufactured from PVD-coated AH120 cemented carbide, a grade developed to combine wear resistance with robust edge behaviour. The coating reduces flank wear and improves adhesion of the cutting edge, providing longer tool life and consistent performance in interrupted or continuous milling. For manufacturing operations where repeatability and low scrap rates matter, this composition supports a controlled material removal rate and predictable regrind intervals. Built for fast tool changes and lower tooling costs Designed as part of the TungMeister modular milling family, the insert enables quick head swaps and re-usage of shafts, cutting machine setup time and overall tooling expenses. The insert’s mounting features — including a cylindrical hole with double-sided countersink (40°–60°) — ensure secure clamping in the cutter head and accurate seating during indexation. This leads to reduced downtime and easier inventory management for production shops that require flexible, application-led tooling. Precision geometry for predictable surfaces and chip control The triangular cutting geometry with a 0.8 mm corner radius and a 60° cutting wedge delivers a balance between strength and finish quality: the radius supports higher feed rates and edge stability, while the wedge angle helps maintain consistent cutting forces. The double-sided chipbreaker controls chip formation across a range of materials, improving evacuation and surface finish during operations such as shoulder and face milling. Plate dimensions and a thickness of 7.94 mm provide a stable seat in the cutter head, contributing to repeatable part tolerances. Contact Metav Werkzeuge to configure TungMeister milling heads with Tungaloy TNMU 120708 AH120 inserts and secure a tailored tooling solution for reliable production. Technical Data Article number: 6752717 Manufacturer SKU: TUN6752717 SKU: 6752717-Tungaloy Model series: TungMeister Insert designation: TNMU120708 AH120 Core dimensions & ratings Corner radius: 0.8 mm Insert size: 12 mm Plate thickness: 7.94 mm Relief angle: 0° Wedge angle: 60° Hole: with hole (cylindrical + double-sided countersink 40°–60°) Design & special features PVD-coated AH120 cemented carbide Double-sided chipbreaker Triangular insert form Cylindrical hole with double-sided countersink Modular system compatibility for interchangeable heads and reusable shanks Typical applications: shoulder, slot, face and contour milling FAQ What applications suit this triangular insert best? The TNMU 120708 AH120 insert is intended for shoulder, slot, face and contour milling in modular cutter systems, offering process-secure performance for a wide range of milling tasks. How does the AH120 grade affect tool life? The AH120 PVD coating on the cemented carbide substrate improves wear resistance and supports a sharp cutting edge, which extends effective insert life under standard milling conditions. Is the insert compatible with modular heads and reusable shafts? Yes — the insert is part of the TungMeister modular concept and is designed for use with interchangeable milling heads and reusable shanks for easier changeovers. What chip control can be expected from this geometry? The double-sided chipbreaker promotes consistent chip formation and evacuation, resulting in improved surface quality and reduced risk of chip-related damage during milling. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 120708 AH120 Wendeplatten - Tungaloy
Take advantage of a wear- and chipping-resistant PVD-coated carbide grade combined with a modular milling system for reliable, repeatable cutting performance; order via Metav Werkzeuge or consult the technical team if further application advice is required. TNMU 120708 AH120 indexable insert for milling (Tungaloy) A TNMU120708 AH120 Tungaloy insert designed for modular milling systems with interchangeable cutting heads and reusable shafts, suitable for shoulder, slot, face and contour milling applications. TNMU120708 AH120 for milling applications PVD-coated carbide for wear and chipping resistance Triangle form, 12 mm inscribed circle, r0.8 Double-sided chipbreaker, hole with 40°–60° countersink Reliable cutting performance for consistent production The PVD-coated carbide grade AH120 delivers a sharp cutting edge with high resistance to wear and chipping, making it well suited for demanding milling tasks. The PVD-coated finish increases surface hardness and temperature resistance at the cutting edge, which translates into longer tool life and fewer tool changes. In addition, the insert’s construction supports stable chip formation, reducing process variability and improving component quality in serial production. Modular design that boosts uptime and simplifies tooling The insert is part of the TungMeister modular milling system, which comprises a milling head, shaft/extension and mounting accessories. This architecture enables quick head changes and the reuse of shafts, lowering inventory of full tools and shortening setup and changeover times. The modular approach also helps maintain consistent runout and concentricity, supporting higher productivity and a more efficient shop-floor workflow without sacrificing precision. Precise geometry for controlled finishes and secure mounting The triangular insert with a 12 mm inscribed circle and 0.8 mm corner radius balances edge strength and the ability to machine fine features. The platelet thickness of 7.94 mm and the 60° included angle provide rigidity for heavier cuts, while the double-sided chipbreaker improves chip control across a range of cutting conditions. The insert is supplied with a central hole and a cylindrical hole plus double-sided countersink (40°–60°) to ensure secure clamping and repeatable seating in the cutter head. These design elements combine to deliver predictable cutting forces and consistent surface quality. For machining tasks that demand process security and a durable cutting edge, choose the Tungaloy TNMU120708 AH120 insert and contact Metav Werkzeuge for tailored application advice and rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6752715 SKU: 6752715-Tungaloy Manufacturer SKU: TUN6752715 Model series: TungMeister Label: TNMU120708 AH120 Tungaloy-Wendeplatte Key measurements Inscribed circle: 12 mm Plate thickness: 7.94 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 0° Design & features Material: carbide (Hartmetall) Cutting grade: AH120 (PVD-coated) Plate form: triangular Chipbreaker: double-sided Hole style: cylindrical hole with double-sided countersink (40°–60°) System concept: modular milling system with interchangeable heads and reusable shafts Typical applications: shoulder, slot, face and contour milling FAQ What milling operations is this insert suitable for? The TNMU120708 AH120 insert is designed for shoulder, slot, face and contour milling when mounted in the TungMeister modular milling system. How does the AH120 grade perform under challenging conditions? AH120 is a PVD-coated carbide grade formulated for wear and chipping resistance, offering a sharp cutting edge and dependable process security in milling applications. Which geometry details are most relevant for fixture and mounting? The triangular plate with a 12 mm inscribed circle, 0.8 mm corner radius, 7.94 mm thickness and the central hole with a 40°–60° countersink ensure secure clamping and repeatable seating. Is the insert compatible with reusable shafts and interchangeable heads? Yes, the insert is part of the TungMeister modular system, which uses interchangeable cutting heads and reusable shafts to reduce tooling inventory and speed changeovers. What is the manufacturer’s article number and SKU for ordering? The article number is 6752715 and the SKU is 6752715-Tungaloy; the manufacturer SKU is TUN6752715. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com