TNMU 120708 AH3135 Wendeplatten - Tungaloy
High wear resistance from a PVD-coated AH3135 grade combined with a sharp cutting edge and a compact 0.8 mm corner radius supports consistent component quality; the TungMeister modular design enables quick head changes and reusable shanks to reduce tool life-cycle cost. Order the TNMU120708 AH3135 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TNMU120708 AH3135 indexable milling insert by Tungaloy — PVD-coated carbide, 0.8 mm radius A TNMU120708 AH3135 indexable insert engineered for shoulder, slot, face and contour milling within the TungMeister modular milling system. PVD-coated carbide AH3135 0.8 mm corner radius Double-sided chipbreaker Cylindrical hole with countersink Consistent cutting performance through a wear-resistant grade The combination of a PVD-coated surface and a robust carbide substrate delivers extended tool life and repeatable results in high-volume milling operations. The AH3135 grade was selected for its resistance to flank wear and reduced tendency for edge chipping, which together increase process security and reduce rework. As an indexable cutting solution, the insert’s geometry maintains a sharp cutting edge for longer, helping to keep cycle times stable and part tolerances within specification. Precise chip control and predictable edge behaviour A double-sided chipbreaker and the insert’s chip-forming geometry provide reliable swarf control and smoother surface finish in pocket and contour milling. The triangular form with a 0.8 mm corner radius permits accurate shoulder work and fine contouring where small radii are required. The central cylindrical hole with double-sided countersink (40°–60°) ensures secure seating and consistent clamping in the TungMeister heads, which minimises runout and promotes stable cutting forces for predictable tool life. Modular system benefits for lower operating costs Integrated into the TungMeister modular system, the insert fits replaceable cutting heads while the shank components remain reusable, reducing the total cost of ownership. The modular concept simplifies tooling inventory and shortens downtime when re-indexing or replacing heads, contributing to higher machine uptime and faster job turnaround. Practical handling of standardised inserts and a clear grade designation support straightforward process planning and tool requalification. If additional application details are required, Metav Werkzeuge offers technical advice and can provide cutting data recommendations for specific materials and cutting conditions; email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support. Contact Metav Werkzeuge for availability and application advice on the TNMU120708 AH3135 indexable milling insert (SKU TUN6752716) and request cutting parameters tailored to the planned operation Technical data Article number: 6752716 Manufacturer SKU: TUN6752716 Model series: TungMeister WPL designation: TNMU120708 Shape: triangular Key measurements Size: 12 mm Thickness: 7.94 mm Corner radius: 0.8 mm Relief angle: 0° Angle: 60° ISO code: 120708 Materials & features Material: carbide Coating/grade: PVD-coated AH3135 Chipbreaker: double-sided Hole: cylindrical hole + double-sided countersink (40°–60°) Application: milling System: TungMeister modular system Insert geometry: triangular with hole FAQ What types of milling are suitable for this insert? The TNMU120708 AH3135 indexable insert is intended for shoulder, slot, face and contour milling within the TungMeister modular milling system and performs well where a sharp cutting edge and process security are required. Which materials can be machined with this grade? The PVD-coated AH3135 carbide insert was developed for a broad range of materials and is particularly effective where wear resistance and chipping resistance are priorities; consult Metav Werkzeuge for material-specific recommendations. How does the hole and countersink design affect clamping? The cylindrical hole with double-sided countersink (40°–60°) ensures central seating and consistent clamping in the TungMeister heads, reducing runout and enabling stable cutting forces for predictable tool life. What is the correct designation to order this insert? Order using the designation TNMU120708 AH3135 (SKU TUN6752716, article number 6752716) to ensure the correct PVD-coated carbide grade and geometry are supplied. Can the insert be reused or re-indexed? The insert is double-sided and intended for indexable use; heads in the TungMeister system accept replaceable inserts while shanks are reusable, supporting economical re-indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 120708 AH3135 Wendeplatten - Tungaloy
Benefit from the combination of the TungMeister modular system, the wear-resistant AH3135 PVD-coated carbide grade and the precise 60° geometry with a 0.8 mm corner radius for reliable shoulder, slot and contour milling; order the insert directly via Metav Werkzeuge or consult their specialists for integration advice. TNMU 120708 AH3135 — triangular indexable insert for milling, PVD-coated carbide, Tungaloy The TNMU120708 AH3135 is a triangular indexable insert intended for modular TungMeister milling heads and applicable to shoulder, slot, face and contour milling in versatile production environments. PVD-coated carbide AH3135 for wear resistance Triangular 12 mm insert with 60° cutting angle Central hole with cylindrical bore and countersink 0.8 mm corner radius for fine contouring Consistent milling performance with a wear-resistant cutting grade The insert is produced in the AH3135 grade, a PVD-coated carbide designed to combine edge sharpness with process security. The coating enhances resistance to abrasive wear and reduces edge chipping during interrupted cuts, which leads to longer tool life and fewer index cycles. For operations where predictable performance matters, this geometry and substrate lower the risk of unexpected breakouts and support higher average material removal rates without compromising surface finish. Geometry tuned for accuracy and chip control A 60° included angle on a triangular platform provides a stable cutting engagement and an efficient approach for slotting and shoulder operations. The 0.8 mm corner radius helps to balance edge strength with profile accuracy, allowing fine contouring where small radii are required. The insert features a double-sided chipbreaker to improve chip formation and evacuation; coupled with the central hole and the cylindrical bore with a double-sided countersink, the result is repeatable clamping and consistent positional accuracy across index changes. Modular design that simplifies tool management Designed for the TungMeister modular milling system, the insert integrates with interchangeable heads and reusable shanks to reduce inventory complexity and set-up times. Replacing only the worn cutting head instead of complete tools lowers tooling costs and shortens downtime. Modular toolsets also permit quick adaptation to varying part geometries and batch sizes, supporting both small-lot flexibility and larger production runs without extensive tooling requalification. Operational benefits and recommended applications Intended primarily for milling, the insert suits shoulder, slot, face and contour milling where a sharp cutting edge and stable process are necessary. The 0° free rake and the central mounting design contribute to robust engagement in interrupted cuts and predictable wear patterns, which supports controlled tool life planning. Use this insert where repeatability, chip control and ease of replacement are priorities, particularly in demanding production environments that benefit from modular tool concepts. Contact Metav Werkzeuge for technical integration of the Tungaloy TungMeister system or to request application advice and ordering details for the TNMU120708 insert via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6752714 SKU (manufacturer): TUN6752714 SKU: 6752714-Tungaloy Core specifications ISO designation: 120708 Insert size: 12 mm Thickness: 7.94 mm Corner radius: 0.8 mm Included angle: 60° Free rake angle: 0° Hole: with cylindrical bore and double-sided countersink (40°–60°) Features & materials Material: carbide Coating/grade: AH3135, PVD-coated carbide Shape: triangular Chipbreaker: double-sided Mounting: central hole, cylindrical bore + double-sided countersink System compatibility: TungMeister modular milling system Application: milling (shoulder, slot, face, contour) FAQ What machining tasks is this insert suitable for? The TNMU120708 AH3135 indexable insert is designed for shoulder, slot, face and contour milling and integrates with the TungMeister modular milling heads for flexible production use. What advantages does the AH3135 grade provide? The AH3135 grade is a PVD-coated carbide that delivers improved wear resistance and fracture toughness, combining a sharp cutting edge with process security for stable milling performance. How is the insert secured in the milling head? The insert uses a central hole with a cylindrical bore and a double-sided countersink, enabling secure clamping and repeatable positioning in compatible modular heads. How does the geometry affect machining results? The 60° platform and the 0.8 mm corner radius balance cutting stability with profile accuracy, while the double-sided chipbreaker aids chip control for cleaner surface finishes. Is the insert suitable for interrupted cuts or roughing operations? Yes. The robust carbide substrate and PVD coating, together with the insert geometry, support interrupted cuts and operations where process reliability is crucial. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 120708 AH3225 Wendeplatten - Tungaloy
Take advantage of the combination of proven PVD-coated carbide performance, precise geometry and the flexibility of a modular milling system for stable, productive milling cycles; order the insert directly via Metav Werkzeuge or consult our team for application advice. TNMU 120708 AH3225 – TNMU milling insert for milling, Tungaloy The TNMU120708 AH3225 indexable insert is a triangular milling grade designed for shoulder, slot, face and contour milling within a modular cutter system. Modular milling system with reusable shafts PVD-coated carbide grade AH3225 for process security Triangular insert with 0.8 mm corner radius Double-sided chipbreaker, cylindrical hole + countersink Reliable geometry for consistent production results The triangular insert delivers a defined cutting edge geometry with a 60° wedge angle and a 0.8 mm corner radius, ensuring repeatable engagement across interrupted and continuous cuts. The combination of the AH3225 carbide grade and the PVD surface treatment provides enhanced edge stability and wear resistance, which reduces the risk of chipping during shoulder and contour operations. This geometry supports controlled chip formation and contributes to longer tool life, translating into fewer interruptions in the production flow and higher cumulative productivity. Flexible integration in modular milling setups As part of the TungMeister modular milling family, the indexable element fits into a system that separates cutting heads from reusable shanks and extensions. This modular approach simplifies tool assembly and inventory: heads can be swapped to match specific operations while shanks remain in service, lowering total tooling cost per part. The insert’s central cylindrical hole with a double‑sided countersink (40°–60°) allows secure and repeatable clamping, enabling straightforward interchangeability of heads and stable fixation under milling forces. Material and process suitability for demanding tasks Manufactured from cemented carbide and finished with a PVD coating, this grade is intended for applications that require a sharp cutting edge and reliable performance. The double‑sided chipbreaker design supports efficient chip evacuation across a wide range of feeds and depths of cut, improving surface quality and process stability when machining steels and other common workpiece materials. The robust substrate and coating combination makes the insert suitable for high‑productivity milling where consistent dimensional results and long edge life are priorities. Practical advantages for machining operations The triangular format provides three usable cutting edges per face and several indexing positions, reducing downtime for edge changes. The plate thickness of 7.94 mm and the insert size of 12 mm contribute to a solid seat in the milling head, while the 0° clearance angle design offers versatility across different cutter geometries. By choosing an insert that balances sharpness with toughness, operators benefit from a reduction in unexpected edge failure and an improvement in overall machining economy. For precise advice on integrating the TNMU 120708 AH3225 into an existing toolholder system or to place an order via Metav Werkzeuge, contact Metav Werkzeuge for application support and fast availability. Technical Data Article number: 6824042 SKU: 6824042-Tungaloy Model series: TungMeister Grade/coating: AH3225, PVD-coated carbide Intended use: Milling Facts Corner radius: 0.8 mm Insert size: 12 mm Plate thickness: 7.94 mm Wedge/angle: 60° ISO code: 120708 Hole/countersink: cylindrical hole + double-sided countersink 40°–60° Special features Triangular insert form Double-sided chipbreaker Modular system compatibility with interchangeable heads and reusable shanks 0° clearance angle design Suitable for shoulder, slot, face and contour milling FAQ What materials can this insert machine effectively? The TNMU 120708 AH3225 insert, produced in PVD‑coated cemented carbide, is designed for general milling tasks and delivers reliable performance on a broad range of materials commonly encountered in milling operations. How is the insert fixed in the milling head? The insert is secured via a central cylindrical hole with a double‑sided countersink (40°–60°), enabling stable clamping within compatible TungMeister cutter heads and consistent repeatability after indexing. How many usable cutting edges does the triangular format provide? The triangular geometry offers multiple indexing positions and several usable edges per side, allowing efficient re‑use of the insert before replacement is necessary. Which benefits does the AH3225 grade deliver during milling? The AH3225 grade combines a wear‑resistant substrate with a PVD coating to provide a sharp cutting edge and improved resistance to chipping, supporting process security in demanding milling operations. Is this insert suitable for modular tool systems? Yes; the insert is part of the TungMeister modular milling system and is intended for use with interchangeable heads and reusable shanks designed for that platform. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 120708 AH3225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade AH3225, a modular milling concept, and a compact 0.8 mm corner radius for reliable, repeatable milling results; order directly via Metav Werkzeuge or consult their technical team for application support. TNMU 120708 AH3225 indexable insert for milling by Tungaloy — PVD-coated carbide, 60° cutting angle TNMU120708 AH3225 is an indexable insert designed for milling operations within a modular head system; it delivers process-stable cutting performance for shoulder, slot, face and contour milling depending on head geometry. Modular milling system compatibility PVD-coated carbide grade AH3225 Triangular insert with 0.8 mm corner radius Countersunk hole and 60° relief angle Process security from the PVD-coated carbide grade The modular insert is furnished in PVD-coated carbide of grade AH3225, selected for a balance of wear resistance and edge strength. This combination promotes process security during interrupted cuts and mixed machining tasks: the coating reduces friction and heat build-up, while the substrate maintains dimensional stability. For production contexts where consistent cycle times and predictable tool life matter, the coated substrate reduces unplanned tool changes and supports steady throughput. Geometry and chip control for predictable surface quality A triangular insert form with a 0.8 mm corner radius and a 60° relief angle provides a defined engagement condition for milling edges and shoulders. The small corner radius allows controlled entry and exit of the cutting edge, reducing vibration and enhancing surface finish when finishing passes are required. The double-sided chipbreaker design manages chip formation on both usable faces, improving evacuation and reducing the risk of built-up edge; this translates into fewer reworks and more consistent component quality. Modular system benefits and economical handling Designed for the TungMeister modular concept, the insert suits heads with replaceable cutting modules and reusable shafts, so only the worn insert is replaced rather than the entire toolbody. This modularity lowers tooling investment per cutting length and simplifies inventory management. For job shops and production lines that switch frequently between part families, the quick-change characteristic shortens machine downtime and increases effective spindle utilisation, supporting a leaner production flow. Application scope and operational advice Optimised for conventional milling tasks, the insert is recommended where a sharp cutting edge and process reliability are priorities. Typical uses include shoulder milling, slotting, face milling and contouring depending on the chosen cutter head. The cylindrical hole with double-sided countersink (40°–60°) ensures secure, repeatable clamping in indexed holders. For best results, select cutting data that matches material hardness and toolpath strategy; the coated grade performs well under moderate to demanding cutting speeds while maintaining a stable edge. Contact Metav Werkzeuge today for a tailored recommendation and quotation for the Tungaloy TNMU120708 AH3225 indexable insert; telephone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6824039 Manufacturer SKU: TUN6824039 Vendor SKU: 6824039-Tungaloy Brand: Tungaloy Model series: TungMeister Core data Corner radius: 0.8 mm Insert size: 12 mm Plate thickness: 7.94 mm Relief angle: 0° Cutting angle: 60° Special features Triangular insert, double-sided PVD-coated carbide grade AH3225 Double-sided chipbreaker Cylindrical hole with double-sided countersink (40°–60°) Compatible with modular milling heads and reusable shafts Suitable for shoulder, slot, face and contour milling FAQ What milling tasks suit this insert best? This insert is optimised for shoulder, slot, face and contour milling; the modular head selection determines the final application profile. Which materials does the AH3225 grade handle reliably? The AH3225 PVD-coated carbide is designed for applications that demand a sharp cutting edge and good wear resistance, delivering reliable performance across a wide range of common milling tasks. Is the insert reversible and how many cutting edges are available? The triangular, double-sided design provides multiple indexed cutting edges; the insert can be rotated to present a fresh edge, extending usable life per insert. How is the insert secured in the cutter head? The insert features a cylindrical hole with double-sided countersink (40°–60°) to ensure stable clamping and precise seating in compatible modular milling heads. What effect does the 0.8 mm corner radius have on machining? A 0.8 mm corner radius balances strength and edge sharpness: it reduces notch sensitivity when plunging and improves surface finish on finishing passes compared with larger radii. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 120708 T1215 Wendeplatten - Tungaloy
Benefit from the TungMeister modular concept together with the T1215 carbide grade to achieve stable cutting performance and predictable tool life; precise geometry and a reinforced cutting edge support productive shoulder, slot and face milling. Order directly via Metav Werkzeuge or ask our consultants for project-specific recommendations. TNMU120708 T1215 – Tungaloy triangular insert for milling (60°; 0.8 mm radius) TNMU120708 T1215 is an indexable insert developed for modular milling applications, suitable for shoulder, slot, face and contour operations within the TungMeister system. TungMeister modular system compatibility T1215 Tungaloy carbide grade for wear resistance Triangular 60° insert with 0.8 mm radius Double-sided chipbreaker and central hole Productivity gains from a modular milling concept The TungMeister family places process efficiency at the centre: the combination of a modular head and reusable shanks reduces tooling inventory and simplifies changeovers, while the insert's design allows swift index changes. The T1215 grade, developed by Tungaloy for milling, balances wear resistance and toughness so that the cutter maintains a predictable edge during extended runs. For production environments seeking consistent cycle times, this approach reduces downtime and supports higher machine utilisation without complex tooling logistics. Geometry that stabilises cutting and improves surface finish The triangular plate form with a nominal 60° cutting angle provides a robust cutting edge for shoulder and face milling. The 0.8 mm corner radius contributes to a smoother profile transition and helps absorb intermittent loads when machining short steps or interrupted cuts. The double-sided chipbreaker on the insert promotes reliable chip control in a range of feed conditions, while the central hole with a cylindrical bore and double countersink (40°–60°) ensures secure and repeatable clamping in the milling head. Together, these features enhance dimensional stability and support consistent surface quality on the workpiece. Material balance and cutting-edge stability Manufactured from high-grade carbide, the insert's composition has been selected to deliver a balanced combination of hardness and toughness. This results in a stable cutting edge that resists chipping under mixed cutting conditions and exhibits steady wear characteristics during continuous milling. The plate thickness and geometry allow the cutting edge to withstand moderate interruptions and maintain form accuracy, which is especially valuable in medium- to high-volume machining where predictable tool life reduces setup frequency and total cost per component. Practical versatility and setup advantages Designed as part of a modular system, the insert integrates into a range of TungMeister milling heads and extensions, allowing a single shank to be paired with different cutting heads as process needs change. The plate dimensions (size 12, thickness 7.94 mm) and triangular form provide multiple indexing positions, extending usable life per insert. This practical flexibility supports mixed-series production, where the same tooling platform must accommodate shoulder milling, slotting and contouring without lengthy retooling. For specialist advice on integrating the insert into an existing toolholder or for geometry recommendations, technical support is available to assist with parameter selection and process tuning. Choose Tungaloy inserts for dependable milling results and contact Metav Werkzeuge for tailored selection and rapid delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications Technical Data Article number: 6753458 Manufacturer SKU: TUN6753458 Label / SKU: 6753458-Tungaloy Facts Shape: triangular Size: 12 Thickness: 7.94 mm Corner radius: 0.8 mm Clearance angle: 0° Cutting angle: 60° Hole: with cylindrical bore + double countersink (40°–60°) Special features Material: carbide Grade: T1215 Chipbreaker: double-sided System: TungMeister modular milling system Typical use: shoulder, slot, face and contour milling Plate designation: TNMU120708 FAQ What milling operations is this insert suited for? The TNMU120708 T1215 Tungaloy insert (indexable milling insert, SKU TUN6753458) is intended for shoulder, slot, face and contour milling depending on the head geometry used. How does the T1215 grade influence tool life? The T1215 carbide grade provides a compromise between wear resistance and toughness; in practice, the T1215 grade for Tungaloy inserts delivers a predictable wear pattern and sustained cutting-edge stability during continuous milling. What advantages does the triangular form offer in production? The triangular shape offers multiple indexing positions and a robust 60° cutting angle, which together extend usable life per insert and provide strong edge support for heavier cuts. Is the insert compatible with modular TungMeister holders? Yes, the TNMU120708 insert is designed for the TungMeister modular milling concept and fits the corresponding interchangeable milling heads and reusable shanks. What features support secure clamping and chip control? The insert incorporates a central hole with a cylindrical bore and double countersink (40°–60°) for repeatable clamping, plus a double-sided chipbreaker to manage chip formation across varied feed rates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 120708 T3225 Wendeplatten - Tungaloy
Take advantage of the TungMeister modular concept together with the Tungaloy T3225 grade to increase process reliability and reduce tooling downtime; the triangular TNMU120708 insert combines a 60° geometry and a 0.8 mm corner radius for stable cutting performance in a wide range of milling operations. Order directly via Metav Werkzeuge or contact the consultants for application-specific advice. TNMU 120708 T3225 TNMU for milling by Tungaloy — 60° triangular insert, 0.8 mm radius TNMU120708 T3225 Tungaloy indexable insert for modular milling systems, designed for shoulder, slot, face and contour milling depending on head geometry Triangular insert, 60° geometry for robust milling Tungaloy grade T3225 for wear resistance and toughness Double-sided chipbreaker with cylindrical hole and countersink Compatible with TungMeister modular milling heads Modular system design that raises productivity The TungMeister modular concept pairs interchangeable heads with reusable shafts, allowing shops to adapt tooling to diverse tasks while reducing component waste and inventory complexity. A modular approach shortens set-up times and lowers lifetime costs by limiting full-head replacements; instead, only the cutting head or insert needs renewing. This results in more predictable machine uptime and a straightforward route to higher throughput when shifting between shoulder, slot or contour milling jobs. Proven cutting performance from Tungaloy grade T3225 The insert is manufactured in Tungaloy carbide grade T3225, which balances wear resistance and toughness to maintain edge stability under mixed cutting conditions. That combination reduces flank wear and supports consistent surface finish over longer tool life, especially on interrupted cuts typical of slotting. In industrial production environments the material choice translates directly into fewer indexings and lower per-part tooling expenditure while keeping process windows stable. Geometry and chip control for reliable results A 60° triangular form with a 0.8 mm corner radius delivers a compromise between strength and profile fidelity: the larger included angle enhances edge support for heavier cuts, while the radius reduces stress concentration at the corner. The insert is double-sided with a dedicated chipbreaker and a cylindrical centre hole with double-sided countersink (40°–60°) to ensure secure clamping and controlled chip formation. These features make the insert suitable for a broad set of milling strategies and simplify fixture requirements. Practical compatibility and application range The indexable insert is specified for milling and is supplied to suit the TungMeister modular heads, offering flexible deployment across shoulder, groove, face and contour tasks depending on head geometry. The part is made of carbide and is intended to be used in systems where head interchangeability and quick insert changes are priorities. For shops uncertain about optimal head geometry or cutting data, Metav Werkzeuge provides application guidance and can supply matching shafts and mounting accessories. Contact Metav Werkzeuge today for tailored advice on deploying the TNMU120708 T3225 insert in existing setups, or request recommended cutting data via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6753456 Manufacturer SKU: TUN6753456 SKU: 6753456-Tungaloy Model series: TungMeister Designation: TNMU120708 Facts Corner radius: 0.8 mm Thickness: 7.94 mm Size: 12 mm Included angle: 60° Relief angle: 0° Special features Carbide material Grade: Tungaloy T3225 Triangular insert form Double-sided chipbreaker Cylindrical hole with double-sided countersink (40°–60°) Compatible with TungMeister modular milling system Suitable for shoulder, slot, face and contour milling depending on head geometry FAQ What materials is this insert suitable for? The TNMU120708 T3225 insert is a carbide milling insert designed for general milling tasks; the T3225 grade provides a balance of wear resistance and toughness suitable for a wide range of workpiece materials encountered in production milling. How does the 60° geometry affect milling performance? A 60° triangular geometry increases edge support and rigidity, helping the insert withstand heavier cuts and providing stable performance in face and contour milling operations with improved tool life. Is the insert reversible or single-use per edge? This is a double-sided indexable insert, permitting multiple edge uses. The double-sided chipbreaker and robust geometry support repeated indexings while maintaining cutting stability. Can the insert be clamped in existing TungMeister heads? The TNMU120708 is intended for the TungMeister modular milling system and is compatible with the series’ interchangeable heads and reusable shafts; verify head compatibility with the system drawing or consult Metav Werkzeuge for confirmation. What does the hole and countersink specification mean for clamping? The central cylindrical hole with a double-sided countersink (40°–60°) ensures reliable seating and positive clamping in the insert pocket, which contributes to consistent cutting performance and secure assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 1207R1 AH120 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide AH120 grade and a double-sided chipbreaker for sharp-edge durability and consistent milling performance; order the insert directly via Metav Werkzeuge or consult their specialists for application advice. TNMU 1207R1 AH120 — Milling insert (milling) by Tungaloy, PVD-coated carbide, 60° The TNMU1207R1 AH120 is an indexable, PVD-coated carbide insert engineered for use in Tungaloy milling systems; it is intended for face, shoulder, slot, high-feed and contour milling where a sharp cutting edge and process security are required. PVD-coated wear- and chip-resistant AH120 Triangular 60° form for versatile milling Double-sided chipbreaker for process security Cylindrical hole with double countersink 40°–60° Consistent cutting performance through advanced coating and grade The PVD-coated AH120 carbide composition provides a balance of wear resistance and edge toughness that suits a wide range of milling tasks. The physical vapour deposition layer reduces flank and crater wear while the substrate retains fracture resistance under interrupted cuts. This combination supports longer tool life and more consistent cycle times, which translates into improved operational efficiency and predictable part quality in production environments where stability and sharp edges matter. Geometry designed for adaptable process control and chip management A triangular 60° plate form with a double-sided chipbreaker offers two effective cutting edges per face and reliable chip control during varying depths of cut. The insert’s 0 mm corner radius and 7.94 mm plate thickness give a robust edge for shoulder and slot milling, while the double-sided chipbreaker helps maintain surface finish and evacuation of swarf. The design therefore reduces the risk of edge chipping and supports stable machining across materials typically processed in milling operations. Practical system integration for reliable clamping and quick changeover The insert features a cylindrical hole with double countersink (40°–60°) to suit secure clamping with standard Tungaloy cutter bodies; correct seat geometry and clamping screw selection ensure repeatable positioning and torque transmission. As part of a matched milling system, this indexable solution lowers setup time and simplifies inventory management, delivering reproducible results across batches. The documented specification allows straightforward selection for shops aiming to increase uptime and maintain consistent surface quality. For application-specific recommendations or to order TNMU1207R1 AH120 inserts from Tungaloy, contact Metav Werkzeuge for expert advice and prompt processing — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6735207 SKU: 6735207-Tungaloy Manufacturer SKU: TUN6735207 Model series: Milling indexable inserts Material: carbide Coating: PVD Designation: TNMU1207R1 AH120 Facts Plate thickness: 7.94 mm Plate size: 12 mm Cutting angle: 60° Corner radius: 0 mm Free angle: 0° ISO designation: 1207R1 Hole style: cylindrical hole + double countersink (40°–60°) Special features PVD-coated carbide grade AH120 Double-sided chipbreaker Triangular plate form Typical applications: face, shoulder, slot, high-feed and contour milling System requirement: matching seat geometry and cutter body Insert with centre hole for secure clamping FAQ What materials is this insert suited to machine? The TNMU1207R1 AH120 insert is formulated for a broad range of machining tasks and performs well where a durable, fracture-resistant edge is required; the PVD-coated carbide grade supports process security across many steels and common alloys. Is the insert reversible or single-sided? This is a double-sided, triangular indexable insert; the double-sided chipbreaker and triangular form enable multiple effective cutting edges before replacement. What does the AH120 grade provide compared with other grades? AH120 delivers a wear- and chip-resistant performance profile, combining a hard PVD coating with a tough carbide substrate for improved edge life and reduced risk of breakouts during milling. How is the insert clamped in the cutter body? The TNMU1207R1 uses a cylindrical centre hole with a double countersink (40°–60°) to secure it with a clamping screw in compatible Tungaloy milling bodies; correct seat geometry is essential for reliable clamping. Can this insert be used for high-feed milling? Yes, the insert’s geometry and AH120 grade make it suitable for high-feed applications within the limits defined by the associated cutter family and machine capability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 1207R1 AH3135 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH3135 carbide for wear and fracture resistance, a sharp cutting edge for consistent process security, and a standardised 60° triangular form that simplifies tool inventory; order the insert directly via Metav Werkzeuge or ask the consultants for application matching. TNMU 1207R1 AH3135 – Triangular milling insert for Tungaloy milling systems, PVD-coated carbide, 60° The TNMU 1207R1 AH3135 is a PVD-coated carbide triangular insert designed for a wide range of milling operations in Tungaloy milling systems, requiring matching insert seats, geometry and cutter bodies. PVD-coated carbide AH3135 for wear resistance Triangular 12 mm insert with 60° geometry Double-sided chipbreaker for controlled chips With hole and countersink for secure clamping Extended tool life through wear-resistant coating and sharp edge The PVD-coated AH3135 grade is engineered for wear resistance and resistance to edge chipping, which leads to more predictable performance in interrupted and continuous cuts. By combining a fine-grain carbide substrate with a modern PVD layer, the insert maintains a sharp cutting edge for longer periods, reducing unexpected tool changes and supporting steady production flow. This results in improved machine uptime and fewer process interruptions when the insert is used within the specified Tungaloy tool families. Reliable chip control and secure clamping for stable results The insert’s double-sided chipbreaker and triangular geometry at 60° provide consistent chip formation across a variety of depths of cut. The central cylindrical hole with a double-sided countersink (40°–60°) ensures precise alignment and secure clamping in compatible cutter bodies, while the 12 mm seat and 7.94 mm thickness contribute to mechanical stability during high-load milling. These design features combine to deliver reproducible surface finish and reduced vibration in demanding milling tasks. Flexible application range across standard milling tasks Designed for face, shoulder, slot, high-feed and contour milling (dependent on the assigned tool family), the insert supports diverse production requirements with a single geometry. The triangular form allows three effective cutting edges per index, improving tool utilisation and reducing inventory complexity. When paired with appropriately matched cutter bodies, the insert enables consistent cycle times and high process reliability across multiple component families. Practical handling and system compatibility The insert belongs to the milling indexable insert system and must be used with Tungaloy-compatible cutter bodies where the seat, geometry and clamping method are technically identical. The design includes a corner radius of 0 and a clearance angle of 0°, so selection of feed rates and depths of cut should follow the cutter body and machine capability. For customers requiring guidance on selecting the correct insert–body combination, technical consultation is available to ensure the insert’s AH3135 properties are fully exploited in the intended application. For tailored advice on matching the TNMU 1207R1 AH3135 insert to specific milling bodies and production goals, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for application support and availability Technical data Manufacturer article number: 6735208 Manufacturer SKU: TUN6735208 Item SKU: 6735208-Tungaloy Designation: TNMU1207R1 Facts Cutting angle: 60° Plate size: 12 mm Plate thickness: 7.94 mm Corner radius: 0 Clearance angle: 0° Special features PVD-coated carbide (AH3135) Double-sided chipbreaker With hole; cylindrical hole + double-sided countersink (40°–60°) Triangular plate form Typical applications: face, shoulder, slot, high-feed and contour milling Model series: milling indexable inserts FAQ Is the insert suitable for high-feed milling? The TNMU 1207R1 AH3135 Tungaloy milling insert is listed for high-feed applications among its typical uses; final parameters depend on the chosen cutter body and machine capability. Which cutter bodies fit this insert? The insert requires Tungaloy-compatible cutter bodies where the insert seat, geometry and clamping method match the TNMU1207R1 specification; the manufacturer article number 6735208 can be referenced for correct matching. How does the chipbreaker influence machining? The double-sided chipbreaker on this insert promotes consistent chip formation and evacuation, which enhances process stability and surface quality during milling operations. What benefits does the AH3135 coating provide? The PVD-coated AH3135 grade offers improved wear resistance and edge stability, reducing the risk of chipping and supporting longer tool life under typical milling conditions. What is the purpose of the countersunk hole? The cylindrical hole with a double-sided countersink (40°–60°) ensures accurate seating and secure clamping, which contributes to repeatable positioning and reliable cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 1207R1 AH3225 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide substrate and a double-sided chipbreaker yields consistent cutting performance and extended edge life for versatile milling tasks; the precise triangular 12 mm form factor with a centred hole ensures reliable seating and fast indexing. Order the TNMU1207R1 AH3225 insert directly via Metav Werkzeuge or ask our consultants if needed. TNMU 1207R1 AH3225 Triangular indexable milling insert, 12 mm — Tungaloy The TNMU1207R1 AH3225 is a triangular indexable insert engineered for general milling applications, offering wear-resistant PVD-coated carbide for face, shoulder, slot and contour milling. PVD-coated carbide grade AH3225 Triangular insert, 12 mm size Cylindrical hole with 40°–60° countersink Double-sided chipbreaker for process stability Consistent cutting performance through coated carbide technology The TNMU1207R1 insert combines a PVD-coated surface with a carbide substrate to deliver a balance between wear resistance and fracture toughness. This material pairing reduces flank wear and preserves a sharp cutting edge for longer tool life, which translates into fewer interruptions for indexing and tool changes. For mills handling a mix of steels and cast iron, the coated grade AH3225 is optimised to maintain edge form under varying cutting conditions, helping to sustain dimensional accuracy and surface finish across interrupted and continuous cuts. Reliable seating and fast tool changeover for productivity gains Designed in a triangular 12 mm format with a centred cylindrical hole and a dual-angle countersink (40°–60°), the insert enables precise seating in compatible cutter bodies. The standardised ISO designation assists in matching the insert to the correct milling body and clamping screw, ensuring repeatable positioning and minimizing setup time. The 7.94 mm thickness and defined seating geometry contribute to stable clamping, reducing micro-movements that can impact tolerances during high-feed or shoulder milling operations. Process security and chip control for fewer rejects The insert’s double-sided chipbreaker geometry promotes controlled chip formation and evacuation, supporting consistent cutting forces and lowering the risk of edge chipping under heavy engagement. With a clearance angle of 0° and a corner radius of 0 mm, the design favours sharp-entry cuts where a defined cutting edge is required. These characteristics make the insert particularly suitable for applications where process reliability and repeatable component quality take priority over aggressive corner radii. Practical integration and application guidance The insert is supplied for use within the matching Tungaloy milling system: seating, plate geometry and cutter body must be technically compatible to achieve the described performance. As part of a system build—cutter body, indexable insert, clamping screw and any backing or shim—the insert offers flexibility for planing, slotting, contouring and high-feed strategies depending on the selected tool family. Where mixed-material batches are processed, the AH3225 grade supports a broad material range while keeping a predictable tool life profile. Contact Metav Werkzeuge for advice on integrating the Tungaloy TNMU1207R1 AH3225 insert into production and to request availability or delivery details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6824043 Manufacturer SKU: TUN6824043 SKU: 6824043-Tungaloy Model series: Fräswendeschneidplatten Full name: TNMU1207R1 AH3225 Tungaloy-Wendeplatte Facts Thickness: 7.94 mm Size: 12 mm Angle: 60° Clearance angle: 0° Corner radius: 0 mm Countersink: 40°–60° Features Material: carbide (cemented carbide) Coating: PVD Grade: AH3225 Shape: triangular Hole style: cylindrical hole with double-sided countersink Chipbreaker: double-sided Application: milling (face, shoulder, slot, contour) FAQ Which materials is this insert suitable for? The TNMU1207R1 AH3225 insert is suitable for a broad range of materials commonly encountered in milling, including steels and cast iron, thanks to its PVD-coated carbide grade AH3225 designed for wear resistance and edge stability. How is the TNMU1207R1 mounted in the cutter body? Mounting requires a compatible Tungaloy milling body with the correct seating geometry; the insert’s centred cylindrical hole and 40°–60° countersink provide secure clamping and repeatable positioning when used with the matching clamping screw and backing plate. What are the main benefits of the AH3225 grade? Grade AH3225 offers a balance of wear resistance and chipping resistance, providing reliable edge life and process security for general-purpose milling operations. Is this insert reversible or indexable on both sides? The insert features a double-sided chipbreaker design, allowing indexing to multiple usable edges in line with the triangular geometry; this supports efficient edge utilisation and reduced tooling costs per edge. What is the ISO designation for ordering the insert? The ISO designation is TNMU1207R1, which should be referenced together with the grade AH3225 and the manufacturer Tungaloy when specifying the insert for procurement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 1207R2 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide and a triangular, 60° geometry for stable, sharp cutting performance — order the insert directly via Metav Werkzeuge or ask our consultants if additional technical advice is required. TNMU1207R2 AH120 indexable milling insert — triangular form, PVD‑coated carbide by Tungaloy The TNMU1207R2 AH120 is a triangular indexable insert designed for milling operations in compatible Tungaloy milling systems, offering high process security for a range of face, shoulder, slot and contour milling tasks. PVD-coated carbide for wear resistance Triangular form with 60° cutting angle Cylindrical hole with double-sided countersink Reliable cutting performance for diverse milling tasks The insert delivers consistently sharp cutting action thanks to its PVD-coated carbide grade AH120, which combines a wear-resistant coating with a robust substrate. This composition supports long edge life and predictable tool behaviour during operations such as face milling and shoulder milling. The insert’s geometry provides a distinct 60° cutting angle, enabling effective engagement in both conventional and high-feed strategies while maintaining surface quality and dimensional control. Durability and edge stability that reduce interruptions Designed as a wear- and chipping-resistant grade, the insert features a double-sided chipbreaker which moderates chip formation and evacuation. This reduces the risk of edge chipping under variable cutting loads and helps maintain a steady process window. The resulting reduction in unexpected tool changes improves uptime and contributes to a more economical machining cycle when repeated production runs are required. System compatibility and clear assembly requirements Indexable inserts perform reliably only when matched to the correct tool body; therefore, insert seat, geometry and cutter body must be technically compatible. The insert is supplied with a hole and a cylindrical hole plus double-sided countersink (40°–60°) to match secure clamping in Tungaloy milling bodies. Clear notation of seat compatibility prevents mounting errors and ensures the clamping screw and backing components provide uniform support under cutting loads. Practical machining advantages and recommended conditions With an inscribed circle of 12 mm and a thickness of 7.94 mm, this insert is suited for medium-duty milling where a sharp edge and process security are priorities. The listed 0° relief angle supports stable cutting engagement and precise profile control, making the insert appropriate for finishing and semi-finishing passes where surface integrity matters. Process planners benefit from the predictable behaviour of the grade, which assists in optimising feeds and speeds for consistent component quality. Choose the Tungaloy AH120 grade for improved process security and shorter machine downtime — contact Metav Werkzeuge for tailored advice and prompt supply. Technical data Article number: 6787290 Manufacturer SKU: TUN6787290 SKU: 6787290-Tungaloy Series: Milling indexable inserts Label: TNMU1207R2 AH120 Tungaloy-Wendeplatte Core specifications Shape: triangular Inscribed circle: 12 mm Thickness: 7.94 mm Cutting angle: 60° Relief angle: 0° Hole: with hole Hole style: cylindrical hole + double-sided countersink (40°–60°) Special features Material: carbide (Hartmetall) Coating / grade: PVD‑coated, AH120 Chipbreaker: double-sided Typical application: face, shoulder, slot, high-feed and contour milling Suitability: designed for Tungaloy milling systems, requires matching insert seat and cutter body FAQ What types of milling are suitable for this insert? The TNMU1207R2 AH120 insert is suitable for face, shoulder, slot, high‑feed and contour milling operations when used in compatible Tungaloy milling systems. How does the AH120 grade affect tool life? The AH120 PVD coating enhances wear resistance and edge stability, which helps to extend tool life and maintain consistent cutting performance across repetitive production runs. Is the insert reversible or single‑sided? This is a double‑sided triangular insert with a double‑sided chipbreaker, allowing multiple usable edges per index to reduce tool costs and changeover frequency. What clamping requirements apply to this insert? The insert requires a mating cutter body and clamping screw that match the insert seat geometry; the product features a cylindrical hole with a double‑sided countersink to ensure secure, concentric clamping. Can this insert be used for high‑speed milling? The PVD‑coated carbide composition and robust geometry are suitable for higher cutting speeds within the tool and machine limits; machining parameters should be validated on the specific workpiece material and setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 1207R2 AH3135 Wendeplatten - Tungaloy
Take advantage of the combination of long tool life, sharp cutting performance and consistent chip control for uninterrupted milling operations; order the insert directly via Metav Werkzeuge or ask the consultants for application guidance. TNMU 1207R2 AH3135 indexable insert for milling — Tungaloy The TNMU 1207R2 AH3135 is a triangular indexable insert designed for face, shoulder, slot, high-feed and contour milling in compatible Tungaloy cutter bodies. PVD-coated carbide AH3135 for longevity Wear- and fracture-resistant cutting grade Triangular 12 mm insert, 60° geometry Cylindrical hole with double countersink Consistent production performance with a focus on cutting efficiency The TNMU1207R2 insert delivers predictable results through a combination of a wear-resistant PVD-coated carbide grade and a geometry optimised for secure seating. The AH3135 grade is tuned to maintain a sharp cutting edge under mixed milling conditions, which reduces unplanned tool changes and supports a stable process. This leads to improved chip evacuation and steady component quality, helping to keep cycle times low and productivity high. Secure clamping and geometry that reduce breakouts A triangular form with a 60° geometry provides three usable cutting edges per indexable insert and a compact contact zone that enhances clamping stability. The insert’s cylindrical hole with double-sided countersink (40°–60°) ensures repeatable seating and torque distribution when paired with the matching clamping screw and cutter body. The double-sided chipbreaker aids chip control on both orientations, while the 7.94 mm thickness contributes to rigidity during higher feed operations, lowering the risk of edge breakout. AH3135 grade and PVD coating explained for process reliability The AH3135 designation denotes a PVD-coated cemented carbide designed for fracture and wear resistance in milling. The PVD coating forms a thin, hard layer that improves flank wear resistance and reduces adhesion at the cutting face; in practice this means longer cutting edge life and more consistent surface finish across a production run. For operators unfamiliar with coatings, PVD stands for physical vapour deposition — a production-grade technique that adheres a durable layer without compromising substrate toughness. System compatibility and recommended applications These inserts are part of a system comprising cutter body, indexable insert, clamping screw and, where required, a locating pad; correct matching of seat and geometry is essential for full performance. Typical applications include planing, shoulder milling, slotting, contouring and high-feed operations depending on the chosen milling family. For new tool setups, select the cutter body that matches the insert seat and ensure the clamping torque and runout are within machine manufacturer recommendations to preserve process security and maximise tool life. For reliable high-performance milling with Tungaloy AH3135 inserts, contact Metav Werkzeuge for tailored advice or to secure supply of the TNMU 1207R2 — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6787291-Tungaloy Manufacturer SKU: TUN6787291 Manufacturer article number: 6787291 Model series: Fräswendeschneidplatten Core dimensions Shape: triangular Size: 12 mm Thickness: 7.94 mm Geometry: 60° Relief angle: 0° Hole: with hole Hole style: cylindrical hole + double-sided countersink (40°–60°) Chipbreaker: double-sided Special features Material: cemented carbide Coating: PVD Grade: AH3135 Typical application: milling (face, shoulder, slot, high-feed, contour) System: for Tungaloy milling systems; insert and cutter body must match FAQ What milling tasks is this insert intended for? The insert is intended for a range of milling operations including face, shoulder, slot, high-feed and contour milling when used in compatible Tungaloy cutter systems. How does the AH3135 grade improve tool life? The AH3135 grade combines a tough cemented carbide substrate with a PVD coating, enhancing wear resistance and reducing the risk of edge chipping during interrupted or heavy milling. Why is the cylindrical hole with double countersink important? The cylindrical hole with double countersink provides reliable seating and even clamping force distribution, which supports repeatable positioning and reduces the likelihood of insert movement under load. Is the insert reversible and how many cutting edges are available? The triangular form offers three indexable cutting edges per insert; the double-sided chipbreaker allows productive use on both orientations. How should the insert be integrated into an existing milling system? Ensure the insert seat, geometry and clamping method of the cutter body match the insert specifications; correct torque and runout control are essential for achieving the advertised process security. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 1207R2 AH3225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH3225, a sharp cutting edge and a stable triangular geometry for consistent, process-secure milling; order directly via Metav Werkzeuge or consult the technical team for application advice. TNMU 1207R2 AH3225 Tungaloy indexable insert for milling — triangular 12 mm, PVD-coated carbide TNMU1207R2 AH3225 Tungaloy indexable insert designed for versatile milling applications, offering wear- and chipping-resistant performance in face, shoulder, slot, high-feed and contour milling when matched to the correct cutter body and clamping system PVD-coated carbide AH3225 grade Triangular 12 mm insert, 60° cutting angle Double-sided chipbreaker for reliable chips Countersunk hole (40°–60°) for secure clamping High-efficiency machining through wear-resistant coating and grade The combination of a PVD-coated surface and a carbide substrate in grade AH3225 provides a notable improvement in abrasive and chipping resistance compared with uncoated grades. This composition enables longer intervals between indexings and tool changes, which translates into higher machine uptime and reduced handling costs. The proven coating also helps maintain a sharp cutting edge, resulting in consistent surface finish quality and predictable tool life in a wide range of milling operations. Geometry engineered for process security and stable chip control A triangular insert form and a defined 60° cutting geometry deliver a balance between strength and versatility; the shape supports higher feed rates while the core thickness preserves edge stability. The double-sided chipbreaker optimises chip formation for varying depths of cut, reducing vibration and supporting continuous metal removal. The insert’s with hole design and countersink (40°–60°) ensure reproducible clamping and correct seat alignment within compatible cutter bodies, enhancing overall process security. Practical compatibility and system-level benefits Designed as part of a complete milling system — cutter body, insert, clamp screw and shim where applicable — the insert requires that insert seat, geometry and cutter body are technically matched for safe operation. The medium-thickness profile (approx. 7.94 mm) and 12 mm size suit a broad range of holders intended for face, shoulder, groove, high-feed and contour milling. Clear specification of these parameters makes selection straightforward for process planners and purchasing departments seeking predictable performance across batches. Material applications and recommended use cases The indexable grade AH3225 is tailored for demanding milling tasks where a combination of a sharp edge and reliable wear behaviour is required. Typical applications include finishing and medium-duty roughing in steels and mixed alloy stocks when paired with appropriate cutting data. When combined with a compatible cutter family and correct clamping, the insert contributes to repeatable dimensional accuracy and consistent surface quality in production environments. For machining setups that prioritise process security and long tool life, request availability of the Tungaloy TNMU1207R2 AH3225 insert from Metav Werkzeuge and arrange a technical consultation to confirm holder compatibility and cutting data. Technical Data Article number: 6900926 Manufacturer SKU: TUN6900926 SKU: 6900926-Tungaloy Model series: Milling indexable inserts Material: Carbide Coating / Grade: AH3225 (PVD-coated) Facts Insert designation: TNMU1207R2 Insert size: 12 mm Thickness: 7.94 mm Cutting angle: 60° Clearance angle: 0° Hole style: with hole; cylindrical hole + double-sided countersink (40°–60°) Special features Double-sided chipbreaker Triangular insert form Designed for face, shoulder, slot, high-feed and contour milling System components: cutter body, insert, clamp screw, possible shim Wear- and chipping-resistant grade for process security FAQ What materials is this insert suitable for? The TNMU1207R2 AH3225 insert is specified for a broad range of milling tasks and performs well on common steels and alloyed materials when appropriate cutting data is used. How does the AH3225 grade improve tool life compared with standard carbide? AH3225 combines a PVD coating with a robust carbide substrate to reduce abrasive wear and minimise chipping, providing longer intervals between indexings for the TNMU1207R2. Is the insert compatible with any cutter body? Compatibility requires that the insert seat, geometry and cutter body are technically matched; the TNMU1207R2 must be used in holders designed for its triangular form and 12 mm size. What is the purpose of the countersunk hole on the insert? The cylindrical hole with a double-sided countersink (40°–60°) ensures precise seating and secure clamping, which supports repeatable positioning and process stability for the TNMU1207R2. Can this insert be used for high-feed milling? When installed in a suitable holder and used with recommended feeds and speeds, the insert’s geometry and chip control make it applicable for high-feed and contour milling operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TNMU 1207R2 T1215 Wendeplatten - Tungaloy
Take advantage of a wear-resistant T1215 carbide grade combined with a double-sided chipbreaker and secure seating for consistent milling performance; order the insert directly via Metav Werkzeuge or consult the team for technical matching and availability. TNMU 1207R2 T1215 — TNMU indexable milling insert for milling, 60° included angle (Tungaloy) The TNMU 1207R2 T1215 is a triangular, indexable insert designed for Tungaloy milling systems, offering robust edge stability and a balance of wear resistance and toughness for a wide range of milling operations. TNMU1207R2 T1215 carbide grade Triangle 12 mm insert, 60° included angle Double-sided chipbreaker for controlled chips Cylindrical hole with double countersink 40°–60° Consistent cutting performance through material and geometry The grade T1215, applied to a cemented carbide substrate, provides a defined compromise between hardness and toughness that supports longer tool life and predictable wear behaviour. Combined with the triangular shape and 60° included angle, the insert supplies stable cutting conditions for operations where edge security is essential. The 7.94 mm plate thickness contributes to rigidity, reducing vibration in heavy cuts and helping to maintain surface finish and dimensional accuracy over extended cycles. Secure seating and system compatibility to reduce setup errors Designed specifically for matching Tungaloy milling systems, the insert requires a compatible insert seat, clamp screw and milling body; correct combination ensures repeatable clamping and safe operation. The cylindrical hole with a double-sided countersink (40°–60°) centres the insert and increases clamping reliability, while the 0° relief angle supports full-face contact in the pocket. Technical matching of seat geometry avoids micro-movement and minimises the risk of edge chipping during interrupted cuts. Productivity benefits in typical milling applications With a double-sided chipbreaker, the insert controls chip formation for improved evacuation and stable cutting forces, which supports higher material removal rates and smoother finishing in face, shoulder, slot, high-feed and contour milling depending on the chosen tool family. The triangular form delivers three indexable cutting edges per insert, making the solution economical for batch production and maintenance of throughput. The grade complements the insert geometry by enhancing wear resistance, toughness and cutting-edge stability, resulting in reliable performance across demanding production cycles. For reliable milling with extended tool life, request availability and tailored technical advice for the Tungaloy TNMU1207R2 T1215 indexable insert from Metav Werkzeuge. Technical Data Article number: 6787292 SKU: 6787292-Tungaloy Manufacturer SKU: TUN6787292 Model series: Fräswendeschneidplatten Material: Cemented carbide Application: Milling Facts Insert size: 12 mm Plate thickness: 7.94 mm Included angle: 60° Relief angle: 0° Hole: with hole Countersink: 40°–60° Special features Grade: T1215 Chipbreaker: double-sided Plate shape: triangular Hole style: cylindrical hole + double-sided countersink (40°–60°) Designed for Tungaloy milling systems System components: milling body, indexable insert, clamp screw, optional shim FAQ What is the main advantage of the T1215 grade? The T1215 grade on the TNMU 1207R2 provides a balance of wear resistance and toughness, supporting stable cutting-edge life for milling applications. How many usable cutting edges does this insert provide? As a triangular indexable insert, the TNMU 1207R2 offers three usable cutting edges per insert, enabling rapid indexing and economical edge replacement. How does the hole and countersink design improve performance? The cylindrical hole with a double-sided countersink (40°–60°) on the TNMU 1207R2 ensures central seating and improved clamping stability within compatible Tungaloy milling bodies. Which milling operations suit this insert? The insert is suited to face, shoulder, slot, high-feed and contour milling when paired with the correct tool family and body; selection depends on the specific toolholder and cutting parameters. Is the insert compatible with other manufacturers’ milling bodies? Compatibility requires identical seat geometry and clamping method; the TNMU 1207R2 is intended for use in Tungaloy milling systems and must be checked against any alternative body design. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGA 090202 BX360 Wendeplatten - Tungaloy
Achieve consistent finishing on hardened components with the BX360 CBN grade and a precise 0.2 mm corner radius; compatibility with ISO holders ensures quick tool changes and predictable results. Order the TPGA090202 BX360 insert directly via Metav Werkzeuge or consult our specialists for grade selection and process advice. TPGA TPGA090202 BX360 indexable turning insert by Tungaloy — for turning TPGA090202 BX360 is an ISO‑compliant indexable insert conceived for turning applications, optimised for wear‑intensive finishing on hardened steels and, depending on grade, cast iron. CBN grade BX360 for hardened steels and cast iron ISO triangle insert TPGA090202, 60° cutting angle 0.2 mm corner radius for fine finishing Cylindrical-hole insert, 2.38 mm thickness Precision finishing for hardened components The BX360 grade employs CBN as the cutting material, delivering superior wear resistance and consistent edge integrity in high‑hardness applications. As an ISO‑standard triangular insert, the TPGA090202 combines the geometric stability of a 60° cutting angle with a substrate of cemented carbide, enabling fine finishing passes where surface quality and repeatability matter. For shops aiming to reduce rework and maintain cycle‑time stability, the CBN composition reduces flank wear and preserves cutting geometry over longer tool life, supporting a reliable production flow while keeping setup changes minimal. Stable machining and straightforward holder compatibility Designed for secure clamping, the insert features a cylindrical hole and defined tolerance dimensions so that fitment to matched holders is determined by form, clearance angle 11°, tolerance class, fastening and plate thickness. The moderate corner radius of 0.2 mm and 2.38 mm plate thickness provide a balance between edge strength and accurate finish capability, especially on small‑to‑medium workpieces. Where operators require predictable chip control, note that this version is supplied without a chipbreaker, making it suitable for stable setups and light finishing cuts where controlled, continuous chips and surface integrity take priority. Selection guidance and application benefits For turning hardened components, selecting the right grade is crucial: the BX360 CBN option is intended for hard and wear‑prone materials, offering pronounced benefits in end‑of‑line finishing and dimensional accuracy. The triangular plate form gives three usable edges per index, improving economy in high‑mix production, while the cylindrical hole and standard ISO sizing mean rapid replacement and minimal downtime. If a different chip geometry is required, alternative grades and chipbreaker styles should be considered to match material, cut depth and machine stability; Metav Werkzeuge can assist with grade matching and process parameters to achieve the required surface finish and component tolerances. Contact Metav Werkzeuge for tailored grade recommendation, availability of the TPGA090202 BX360 insert and practical application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808760 Manufacturer SKU: TUN6808760 Brand SKU: 6808760-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TPGA090202 BX360 Key dimensions Cutting angle: 60° Clearance angle: 11° Thickness: 2.38 mm Corner radius: 0.2 mm Plate size: 09 Features and suitability Grade: BX360 Cutting material: CBN Substrate: cemented carbide Plate shape: triangular Hole: with hole (cylindrical) Chipbreaker: none Application: Turning; finishing of hardened steels and cast iron (depending on grade) FAQ What materials is this insert designed to machine? The TPGA090202 BX360 insert is formulated with CBN and is intended primarily for hardened steels and, in some executions, for cast iron according to the grade specification. How does the insert secure to a holder? Compatibility is achieved by matching the TPGA geometry, clearance angle 11°, tolerance class, fastening method, plate size and thickness to the corresponding ISO‑compliant holder. Is there a chipbreaker included with this grade? This TPGA090202 BX360 variant is supplied without a chipbreaker, making it suitable for stable finishing passes and setups where chip control is managed by cutting conditions. How many edges are available per insert and what is the intended use? The triangular plate form provides three usable edges; the design is optimised for wear‑intensive finishing and precise dimensional control on hardened components. Can the TPGA090202 BX360 handle roughing operations? The BX360 CBN grade is optimised for finishing and hard materials; roughing strategies typically require different grades or geometries better suited to heavy stock removal. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGA 090202 DX140 Wendeplatten - Tungaloy
High-speed aluminium turning and long tool life are achieved through the combination of PCD cutting material DX140 and the ISO TPGA geometry, delivering reliable productivity and reduced tool changes. Order the TPGA090202 DX140 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TPGA 090202 DX140 Turning insert by Tungaloy — PCD, ISO triangular The TPGA090202 DX140 is an ISO‑standard triangular indexable insert designed for external and internal turning of aluminium, non‑ferrous metals and abrasive non‑metallic materials. ISO triangular insert TPGA 090202 PCD grade DX140 for aluminium & non‑ferrous 60° insert angle with 0.2 mm corner radius 2.38 mm thickness, cylindrical hole for clamping Increase throughput with PCD performance The combination of polished PCD cutting edges and the DX140 grade enables significantly higher cutting speeds when machining aluminium and other non‑ferrous materials. Polycrystalline diamond offers exceptional wear resistance and low adhesion, which translates into fewer tool changes and longer uninterrupted cycles. For applications where abrasive inclusions or abrasive non‑metals are present, the PCD edge keeps the cutting geometry intact for extended runtimes, helping to increase overall productivity while maintaining consistent surface quality. Secure seating and ISO conformity for repeatable results Built to the ISO TPGA standard, the insert’s geometry, 11° relief angle and tolerance class ensure compatibility with matching holders and bores. The cylindrical hole and standard clamping interface provide a stable seat that reduces vibration and improves surface finish stability. When combined with the correct holder, underlay and clamping screws, the system supports repeatable positioning and simple replacement, which lowers setup time and improves process reliability. Precision geometry for fine finishes and form control The triangular form with a 60° included angle and 0.2 mm corner radius produces a small nose radius suitable for fine profiling and finishing passes. The absence of an integrated chipbreaker means chip control must be matched to the workpiece and machining conditions; selecting the appropriate chip former and cutting parameters helps to avoid built‑up edge and to control chip flow. This geometry is particularly effective where profile accuracy and close tolerance surfaces are required. Substrate and grade engineered for longevity The insert combines a tungsten carbide substrate with a PCD cutting layer to balance toughness and edge hardness. That construction supports high productivity in light‑to‑medium interrupted cuts and continuous finishing operations on aluminium and abrasive non‑metals. The DX140 grade is tuned to deliver long tool life under elevated cutting speeds, which reduces tooling consumption and contributes to a lower cost per part in high‑volume turning operations. For reliable high‑speed aluminium turning with the Tungaloy TPGA090202 DX140, contact Metav Werkzeuge for availability and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808759 SKU: 6808759-Tungaloy Manufacturer SKU: TUN6808759 Manufacturer article number: 6808759 Measurements Thickness: 2.38 mm Insert size: 09 Corner radius: 0.2 mm Relief angle: 11° Insert angle: 60° Design & special features Shape: triangular Hole: with cylindrical hole Cutting material: PCD (polycrystalline diamond) Substrate material: tungsten carbide Grade: DX140 Chipbreaker: none FAQ Which materials is this insert intended for? The TPGA090202 DX140 insert from Tungaloy is intended for aluminium, other non‑ferrous metals and abrasive non‑metallic materials, utilising the PCD cutting edge for extended wear resistance. Is the insert compatible with standard TPGA holders? Yes. The insert conforms to the ISO TPGA designation and its compatibility depends on matching holder form, relief angle of 11°, tolerance class, size and thickness. Can this insert be used for finishing operations? With its 0.2 mm corner radius and sharp PCD edge, the TPGA090202 DX140 is suitable for fine finishing and profiling where high surface quality is required. How is the insert clamped in the toolholder? Clamping is achieved via the cylindrical centre hole together with the appropriate underlay/shim, clamp set and screws to ensure a secure, repeatable fit. Does this insert include a chipbreaker? This version is supplied without a chipbreaker; chip control should be managed by selecting a suitable chipformer and optimising cutting parameters for the workpiece and stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGA 090204 BX360 Wendeplatten - Tungaloy
Take advantage of the wear‑resistant CBN grade and ISO‑standard geometry for consistent finishing of hardened components; the combination of a small 0.4 mm nose radius and stable triangular form ensures repeatable surface quality and long tool life. Order original Tungaloy inserts via Metav Werkzeuge or consult our advisers for application support. TPGA090204 BX360 ISO triangular turning insert, CBN for hardened steel (Tungaloy) A TPGA090204 BX360 insert for ISO‑compliant external and internal turning, designed for high‑hardness finishing and stable chip control in demanding production environments. CBN grade BX360 for hardened steels ISO triangular form, 60° cutting angle Cylindrical hole for secure clamping 0.4 mm nose radius, 2.38 mm thickness Precise finishing for hardened components with measurable benefits The triangular indexable insert offers a defined 60° orientation and a small 0.4 mm nose radius, delivering controlled engagement and consistent profile accuracy in finishing passes. The use of cubic boron nitride (CBN) in the BX360 grade provides superior abrasion resistance compared with conventional carbide grades, which translates into fewer tool changes and reduced downtime. Where repeated dimensional accuracy and surface integrity matter, the hardened‑material capability of this insert supports high‑quality end results with predictable tool life. Secure seating and compatibility to reduce set‑up variability Engineered to ISO dimensions, the insert fits standard external holders and boring bars when form, clearance angle and thickness are matched. The cylindrical hole in the centre allows positive clamping and repeatable positioning, limiting micro‑movement during interrupted cuts. Presented as a component of a system — insert, seat/adapter and fastening hardware — the standardised geometry simplifies inventory management and reduces set‑up effort across multiple machines. Productivity through a wear‑resistant CBN grade The BX360 cutting material is optimised for high‑hardness applications and abrasive finishing. CBN provides stable edge retention at elevated temperatures and maintains surface finish over extended cycles, which improves process economics by extending service intervals. For shops turning hardened steels or certain cast irons, the CBN grade enables higher cutting speeds in finishing operations while preserving dimensional stability and surface quality. Selection guidance and practical application notes For external and internal turning applications, select the grade and chipbreaker suited to the workpiece material and the intended operation; this insert is supplied without a chipbreaker, making it suitable for stable finishing cuts where chip form is controlled by cutting parameters and holder geometry. The plate thickness of 2.38 mm and ISO size 09 suit light to moderate radial engagements in finishing programmes. When machining hardened components, pair the insert with rigid clamping, minimal tool overhang and stable feed to fully exploit the grade’s wear resistance. Contact Metav Werkzeuge for application advice or to source original Tungaloy TPGA090204 BX360 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical support and ordering. Technical data Article number: 6808763 Manufacturer article number: 6808763 SKU: 6808763-Tungaloy Manufacturer SKU: TUN6808763 Model series: ISO indexable turning inserts Material: carbide Numbers / Core technical data Insert designation: TPGA090204 Grade: BX360 (CBN) Cutting angle: 60° Clearance angle: 11° Nose radius: 0.4 mm Thickness: 2.38 mm Size: 09 Designs / Special features Triangular insert form Cylindrical hole for clamping No chipbreaker supplied Intended for turning (external and internal) Suited for hardened steels and, depending on version, cast iron ISO‑standard geometry for holder compatibility FAQ What materials is this insert designed for? The TPGA090204 BX360 insert uses a CBN cutting material and is designed primarily for hardened steels and, depending on the specific version, certain cast irons; it is optimised for wear‑intensive finishing. How does the BX360 grade affect tool life? The BX360 CBN grade offers superior abrasion resistance compared with conventional carbide, resulting in longer edge retention and extended service intervals in high‑hardness finishing operations. Is the insert compatible with standard ISO holders? Yes. The TPGA090204 follows ISO geometry; compatibility depends on matching form, clearance angle, thickness and fastening method to the holder or boring bar. Can this insert be used for roughing operations? This insert is primarily intended for finishing on hardened materials; for heavy roughing, a different geometry and possibly a different grade would be recommended to handle larger depths of cut. What does the absence of a chipbreaker mean in practice? Supplied without a chipbreaker, the insert requires chip control to be managed via cutting parameters and holder geometry, which is common for precise finishing operations where a clean surface and minimal distortion are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGA 090204 DX140 Wendeplatten - Tungaloy
Benefit from the combination of PCD cutting material and ISO compatibility to achieve high cutting speeds and markedly extended tool life in aluminium and non‑ferrous machining; order the insert via Metav Werkzeuge or consult our specialists for application guidance. TPGA 090204 DX140 Tungaloy ISO turning insert for turning A TPGA090204 DX140 Tungaloy indexable insert engineered for high‑speed external and internal turning of aluminium and other non‑ferrous materials. PCD grade DX140 for aluminium and non‑ferrous metals ISO triangular insert TPGA090204 Very long tool life at high cutting speeds 0.4 mm corner radius, 11° relief angle High‑speed machining with PCD for consistent results The insert uses polycrystalline diamond (PCD) in the DX140 grade, optimised for machining aluminium and abrasive non‑ferrous materials. The diamond cutting layer delivers superior wear resistance, which translates into longer tool life and fewer interruptions for index changes. For production environments where cycle time and surface integrity matter, the PCD edge enables higher cutting speeds and a lower cost per component when compared with conventional coatings. Stable geometry and ISO conformity for reliable clamping The TPGA090204 format follows ISO conventions for triangular turning inserts, ensuring compatibility with a wide range of holders when form, clearance, tolerance class, fastening method, size and thickness match. The triangular shape combined with a 0.4 mm corner radius and 11° relief angle offers good edge strength and predictable chip formation. The insert’s cylindrical hole and standard dimensions simplify fixture selection and reduce setup time on production lines. Productivity gains through reduced tool changes Selecting a DX140 PCD grade minimises downtime caused by frequent insert replacements. The combination of long stand life and thermal stability supports uninterrupted runs and fewer tool inventories. In practical terms this means lower handling effort, improved machine uptime and a better output per shift — particularly important in batch production and automated turning centres where consistent tool performance is essential. Practical application notes and handling Designed for turning operations, the insert is suitable for both external and internal applications when matched with an appropriate carbide or steel holder. As the insert lacks an integrated chipbreaker, choose a holder and cutting parameters that support controlled chip evacuation for the specific non‑ferrous alloy. For material‑specific recommendations and parameter windows, contact the technical advisors at Metav Werkzeuge or consult the Tungaloy product literature for best‑practice cutting data. Discuss suitability and order the DX140 PCD insert from Metav Werkzeuge today — our consultants advise on holder compatibility and machining parameters to optimise performance. Technical Data Article number: 6808762 Manufacturer SKU: TUN6808762 SKU: 6808762-Tungaloy Model series: ISO‑turning inserts Description: TPGA090204 DX140 Tungaloy insert Facts Angle: 60° Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Plate size: 09 Special features Cutting material: polycrystalline diamond (PCD) Grade: DX140 Shape: triangular Hole: with hole (cylindrical) Substrate: carbide Application: turning (external and internal) FAQ What materials is this insert best suited for? The TPGA090204 DX140 is designed primarily for aluminium and other non‑ferrous metals; the PCD cutting layer ensures long life when machining abrasive non‑metallic materials too. Is the insert compatible with standard ISO TPGA toolholders? Yes — the TPGA090204 follows ISO dimensions; compatibility is determined by the holder’s form, clearance, tolerance class, fastening method, size and thickness. Does this grade include a chipbreaker? No, this insert is supplied without a chipbreaker; chip control depends on holder geometry and cutting parameters. What benefits does the DX140 grade provide over coated carbide inserts? DX140’s PCD edge offers markedly better wear resistance and allows higher cutting speeds, resulting in fewer tool changes and improved productivity in non‑ferrous turning. Can this insert be used for internal boring operations? Yes — when installed in a suitable boring bar or internal holder that matches the ISO dimensions, the insert performs well in internal turning of aluminium and similar materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGA 090204 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp uncoated carbide grade and a compact 0.4 mm corner radius for reliable, low-force turning and fine surface finishes; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. TPGA 090204 TH10 turning insert by Tungaloy — ISO triangular indexable insert for turning The TPGA 090204 TH10 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised for non-ferrous materials and applications that benefit from a sharp, uncoated cutting edge TPGA 090204 insert, ISO triangular form Uncoated carbide grade TH10 for non-ferrous 0.4 mm corner radius for fine finishing 11° clearance angle, cylindrical centre hole Precise, low-force cutting for clean surface results The triangular indexable insert is manufactured from uncoated carbide in the TH10 grade, a sharp universal composition that helps to reduce cutting forces and supports cleaner surface finishes when machining non-ferrous materials. The absence of a coating means the cutting edge runs cooler under low-to-moderate cutting speeds and produces less built-up edge on softer alloys; this can translate into fewer machine stops for rework and consistent part quality. Compatibility with toolholders is determined by the insert’s form, 11° clearance, tolerance class, clamping method, size and thickness, so correct holder selection ensures repeatable performance and process stability. Small corner radius and secure clamping improve finish and tool life With a 0.4 mm corner radius and a plate thickness of 2.38 mm, the insert supports delicate finishing passes and dimensional control in tight-tolerance turning. The cylindrical centre hole provides secure clamping in standard ISO triangular pockets, reducing micro-movements that can degrade surface quality. Supplied without a chipbreaker, the insert allows flexibility: select a chip control geometry and cutting parameters matched to the workpiece material and machining conditions to balance chip evacuation and edge life. These design choices contribute to efficient, low-vibration cutting and predictable tool-change intervals. System approach and practical workshop advantages This insert is part of an ISO system comprising the insert itself, a suitable external holder or boring bar, an underlay/clamp set and spare screws; this modular approach simplifies inventory and replacement. The TPGA 090204 format supports both external and internal turning operations across a broad range of non-ferrous alloys, enabling fast index changes and minimal set-up time. For workshop planning, the clear dimensional data and ISO conformity support straightforward toolholder matching and process documentation, helping to keep machining schedules tight and scrap rates low. For dependable turning with Tungaloy’s TH10 uncoated carbide performance, contact Metav Werkzeuge for ordering and technical guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808761-Tungaloy Manufacturer SKU: TUN6808761 Manufacturer article number: 6808761 Manufacturer: Tungaloy Facts ISO designation: 090204 Plate size: 09 Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Insert angle: 60° Special features Material: carbide Grade: TH10 (uncoated) Plate form: triangular Hole: with cylindrical centre hole Chipbreaker: without Typical application: turning, external and internal Compatibility determined by form, clearance, tolerance, clamping, size and thickness Model series: ISO turning indexable inserts FAQ What materials is this insert best suited for? The TPGA 090204 TH10 insert is optimised for non-ferrous materials; the TH10 uncoated carbide grade supports low cutting forces and clean surfaces when machining aluminium, brass and similar alloys. Is the insert supplied with a chipbreaker? No, the insert is supplied without a chipbreaker; select an appropriate chip control geometry and holder to suit the workpiece material and machining stability. How is compatibility with toolholders ensured? Compatibility depends on the insert’s form, 11° clearance, tolerance class, clamping arrangement, size and thickness; matching these parameters with a standard ISO triangular holder ensures secure clamping and correct seating. Can this insert be used for internal turning? Yes, the insert’s triangular shape and ISO conformity make it suitable for both external and internal turning when paired with the correct boring bar or toolholder. What advantages does the uncoated TH10 grade provide? The TH10 uncoated grade offers a sharp cutting edge that reduces cutting forces and minimises built-up edge on softer alloys, supporting improved surface finish and predictable tool behaviour. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGA 110202 BX360 Wendeplatten - Tungaloy
High-hardness finishing and consistent process security are delivered by the combination of CBN cutting grade and precise geometry: BX360 grade, 0.2 mm corner radius and 11° clearance angle ensure repeatable surface quality and extended tool life. Order the insert directly via Metav Werkzeuge or consult their technical team for holder compatibility and application advice. TPGA 110202 BX360 TPGA indexable insert for turning — Tungaloy A TPGA110202 BX360 ISO-standard indexable insert engineered for precision turning of hardened steels and fine finishing operations ISO-standard triangular insert size 11 CBN grade BX360 for hardened steels 11° clearance angle for stable cutting 0.2 mm corner radius for fine finishing Precision finishing for hardened components The use of CBN (cubic boron nitride) in the BX360 grade delivers high wear resistance specifically for machining hardened steels; this means improved dimensional stability and a consistent surface finish during end‑passes. The insert’s geometry—a 0.2 mm corner radius and defined 11° clearance angle—reduces the risk of edge overload while supporting light finishing cuts. For shops moving from conventional carbide inserts to superabrasive grades, the result is lower rework rates and a more predictable machining window when producing shafts, bearings or hardened bores. ISO compatibility and simple system integration Built to the ISO turning‑insert system, the triangular form and cylindrical hole enable straightforward matching to standard external holders and boring bars. Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; matching those parameters ensures secure clamping and repeatable seating. The insert thickness of 2.38 mm and size designation 11 fit common ISO‑spec holders, reducing time lost to custom adaptations and simplifying tool management across multiple machines. Stable processes and economical finishing Without a chipbreaker and with a superabrasive cutting material, the design favours steady, low‑vibration cutting in hardened material finishing. This yields longer intervals between indexings, lower scrap rates and an overall improvement in process reliability. The cemented carbide substrate supports stable edge geometry under pressure while the BX360 CBN layer sustains the cutting edge at high temperatures typical of hard turning. The combined effect is improved productivity and predictable tool life in demanding applications. For high‑precision finishing of hardened components, contact Metav Werkzeuge to check availability of the Tungaloy TPGA110202 BX360 insert and to receive guidance on selecting the matching holder and cutting data; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808767 SKU: 6808767-Tungaloy Manufacturer SKU: TUN6808767 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Size: 11 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 11° Angle: 60° Hole: with cylindrical hole Special features Material: cemented carbide substrate Cutting material: CBN (cubic boron nitride), BX360 grade Shape: triangular Chipbreaker: none Application: turning (external and internal) Typical use: finishing of hardened steels FAQ Is this insert suitable for turning hardened steels? Yes. The TPGA110202 BX360 insert from Tungaloy uses a CBN cutting material formulated for high‑hardness finishing and is specifically intended for hardened steels. Which holders are compatible with this ISO insert? Compatibility follows ISO standards: holders matching the triangular form, size 11, thickness 2.38 mm, 11° clearance angle and cylindrical‑hole fastening will accept the insert; ensure the holder’s tolerance class and clamping method correspond to the insert geometry. Can the insert be used for internal as well as external turning? Yes. Designed for both external and internal turning, the insert provides stable finishing performance where a fine corner radius and a CBN grade are required. What process benefits does BX360 provide compared with conventional grades? BX360’s CBN composition improves wear resistance and thermal stability during hard turning, offering longer cutting edge life, consistent surface quality and reduced rework for finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGA 110202 DX140 Wendeplatten - Tungaloy
Taking advantage of the DX140 polycrystalline diamond grade and the 11° relief, this TPGA110202 insert delivers notably extended tool life and higher productivity in aluminium and non‑ferrous turning; order the insert directly via Metav Werkzeuge or contact their consultants for process advice. TPGA110202 DX140 — Tungaloy turning insert, PCD, 11° relief TPGA110202 DX140 is an ISO‑standard indexable turning insert optimised for high‑speed aluminium and non‑ferrous machining. TPGA110202 DX140 PCD grade Designed for high cutting speeds Triangular insert with 0.2 mm nose radius Cylindrical hole for secure clamping Higher metal‑removal rates and prolonged tool life with PCD technology The polycrystalline diamond (PCD) cutting layer of the DX140 grade provides outstanding hardness and wear resistance, which directly translates into high cutting speeds and consistently long tool life when machining aluminium and other non‑ferrous materials. PCD consists of bonded diamond particles on a substrate, offering superior abrasion resistance versus conventional grades; this results in fewer tool changes and improved component surface finish. The combination of the diamond cutting edge and a stable substrate ensures predictable performance in continuous production runs. ISO compatibility and secure mounting for reliable operation Built to ISO dimensions, the insert’s form and tolerance class ensure straightforward integration into standard external holders or boring bars. The triangular geometry with a cylindrical hole and 2.38 mm plate thickness provides stable seating and accurate indexability; the 0.2 mm nose radius supports fine contouring and close tolerances. Compatibility is determined by insert form, relief angle, tolerance class, fastening and thickness, so matching the insert to an appropriate holder, shim and clamping set guarantees repeatable clamping and process stability. Productivity gains and process economy for machining non‑ferrous alloys As a cutting solution without an integrated chipbreaker, this insert suits continuous cuts and applications where chip form can be controlled by toolpath or holder configuration. The DX140 grade’s wear resistance reduces changeover frequency and tool inventory costs, improving uptime and machining throughput. For operations requiring careful chip control, pairing the insert with a holder designed for chip evacuation or selecting a dedicated chipbreaker variant elsewhere in the system can deliver the required balance between surface quality and cycle time. The result is a productive, economical machining setup for demanding non‑ferrous applications. For reliable high‑speed aluminium turning with proven longevity, choose the Tungaloy TPGA110202 DX140 insert and order via Metav Werkzeuge; technical consultation and holder recommendations are available from Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6808766 Manufacturer SKU: TUN6808766 Model designation: TPGA110202 Grade: DX140 Cutting material: polycrystalline diamond (PCD) Substrate material: Hartmetall Shape: triangular Hole style: cylindrical hole Thickness: 2.38 mm Nose radius: 0.2 mm Relief angle: 11° Size: 11 With chipbreaker: no Application: Turning Facts Thickness: 2.38 mm Radius: 0.2 mm Relief angle: 11° Size: 11 Included hole: cylindrical Manufacturer article number: 6808766 Special features DX140 polycrystalline diamond grade ISO‑standard turning insert Triangular plate for multiple indexing positions Suitable for aluminium, non‑ferrous metals and abrasive non‑metals High cutting speed capability Long tool life for continuous production FAQ Which materials is this insert suitable for? The TPGA110202 DX140 insert is formulated with a PCD cutting layer and is intended for aluminium, other non‑ferrous metals and abrasive non‑metallic materials. Is the insert compatible with ISO holders? Yes, the insert follows ISO dimensions; compatibility depends on form, relief angle, tolerance class, fastening, size and thickness to match the appropriate holder and clamping set. Does this variant include a chipbreaker? This TPGA110202 DX140 version is supplied without a chipbreaker, allowing selection of holder or process strategies for chip control. How does the 0.2 mm nose radius affect finish and tolerance? A 0.2 mm nose radius offers a balance between fine surface finish and tool strength, supporting accurate contouring while maintaining edge stability during turning operations. What advantages does the DX140 PCD grade deliver in production? The DX140 grade provides enhanced abrasion resistance and extended tool life at elevated cutting speeds, reducing downtime and improving overall process economy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGA 110202 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and ISO compatibility for efficient turning cycles; order application advice or the insert directly via Metav Werkzeuge for tailored process support. TPGA 110202 NS9530 Tungaloy turning insert — uncoated cermet, 60° triangular geometry The TPGA 110202 NS9530 is an ISO triangular turning insert engineered for fine finishing of steel in continuous cuts and light depths of cut ISO triangular insert, 60° geometry Uncoated cermet grade NS9530 for fine finishing Sharp cutting edge for low cutting forces Cylindrical through‑hole, 0.2 mm radius Consistent fine finishing with low cutting forces The insert’s main advantage is its uncoated cermet composition, NS9530, which combines the hardness of ceramic phases with the toughness of metallic binders to provide a sharp cutting edge and excellent wear resistance. That material pairing is particularly effective for continuous cutting where surface quality matters; the result is a reliable high surface finish and reduced tendency for built‑up edge. Lower cutting forces decrease energy consumption and lessen vibration, which supports stable process windows and repeatable component quality. Stable geometry and straightforward holder compatibility A triangular 60° form with a 0.2 mm corner radius and 11° relief angle ensures predictable chip flow and precise tool positioning. The insert is ISO‑standardised, so compatibility with a suitable external holder or boring bar depends on matching form, relief angle, tolerance class, clamping style, size and thickness — the typical system comprises the ISO insert, a matching holder, a shim/clamp set and spare screws. The cylindrical through‑hole supports secure fixation and repeatable indexation, helping to reduce setup time and maintain concentricity in turning operations. Practical process guidance for turning operations Designed primarily as a finishing grade for steel, the cutting material excels at small depths of cut and continuous feeds where a clean, sharp edge is required. Since the insert is supplied without a chipbreaker, selecting an appropriate chip control geometry in the holder or choosing a different grade is advisable when broken or segmented chips are expected. For internal or external turning, the combination of NS9530 cermet and the 60° geometry delivers low cutting resistance and consistent dimensional accuracy, making it suitable for precision turned parts where surface integrity is critical. For precision finishing with Tungaloy’s NS9530 technology, consult Metav Werkzeuge for application advice or to order the insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations. Technical Data Manufacturer article number: 6998022 SKU: 6998022-Tungaloy Manufacturer: Tungaloy Facts Size: 11 mm Thickness: 2.38 mm Relief angle: 11° Included angle: 60° Corner radius: 0.2 mm ISO designation: 110202 Special features Uncoated cermet grade NS9530 Intended application: turning (external and internal) Triangular insert, ISO standard Cylindrical through‑hole No chipbreaker System components: insert, holder, shim/clamp set, screws FAQ Is this insert suitable for finishing steel components? The TPGA 110202 NS9530 turning insert from Tungaloy is a finishing grade optimised for steel, offering a sharp cutting edge and low cutting forces for superior surface finish. Which holder features are needed for correct compatibility? Compatibility requires a matching holder with the correct form, relief angle, tolerance class, clamping method, size and thickness to suit the TPGA 110202 geometry and ensure secure fixation. Can the insert be used for internal turning as well as external turning? Yes, the NS9530 grade and triangular form are appropriate for both internal and external turning when the holder and process parameters are matched to the component and machine stability. Why does this insert have no chipbreaker, and when is that acceptable? The absence of a chipbreaker on the TPGA 110202 indicates its optimisation for continuous cuts and small depths of cut; a separate chip control solution or a different grade is recommended for interrupted cuts or heavy chip formation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGA 110202 TH10 Wendeplatten - Tungaloy
Benefit from the combination of TH10 uncoated carbide, a fine 0.2 mm corner radius and ISO‑standard geometry for consistent turning performance; these features support low cutting forces and clean surfaces while reducing insert changes. Order directly via Metav Werkzeuge or consult their specialists for application advice. TPGA 110202 TH10 ISO turning indexable insert — triangular, 11 mm, 11° relief (Tungaloy) A TPGA110202 TH10 indexable turning insert designed for external and internal turning applications, offering a sharp universal grade optimised for non‑ferrous materials and operations requiring low cutting forces and refined surface finish. ISO triangular insert, 11 mm size TH10 uncoated carbide grade Corner radius 0.2 mm for fine finish Cylindrical hole, 11° relief, 2.38 mm thick Predictable geometry for reliable turning results The triangular ISO geometry ensures repeatable seat location and simple indexing for multiple cutting edges; the triangular shape and standardised form make the insert compatible with a wide range of holders when the form, relief angle, tolerance class, fastening and thickness match. This standardisation reduces machine downtime and simplifies stock management by enabling the use of common clamping parts and spare screws within an ISO system. The insert’s dimensional data — 11 mm inscribed circle, 2.38 mm thickness and 11° relief — provide the mechanical stability required for consistent machining of shafts and bores while maintaining process reliability. Low cutting force and clean surfaces from the TH10 grade The TH10 grade is an uncoated carbide designed as a sharp universal variety that performs especially well on non‑ferrous materials. Its cutting geometry and edge preparation reduce the cutting forces, which helps to prevent workpiece deflection and to achieve better surface finish on softer alloys. In applications where minimised burr and fine surface integrity are priorities, this grade supports stable chip formation and predictable tool life. The absence of a chipbreaker keeps the edge sharp for light‑duty finishing and reduces the propensity for material smearing on aluminium or brass components. Economical integration and straightforward system setup As part of the ISO turning insert family, the component integrates into a complete system consisting of the insert, a matching external holder or boring bar, a seating pad or clamp set and replacement screws. The TPGA110202 insert’s central cylindrical hole simplifies secure fastening and repeatable clamping forces, supporting safe corner load transmission and predictable edge strength. This arrangement lowers the total cost of ownership through efficient edge indexing and reduced changeover time, making the insert suitable for production runs where tool‑change rhythm and consistent part quality are essential. For reliable low‑force turning with Tungaloy’s TH10 grade, contact Metav Werkzeuge for tailored application advice and ordering — Metav Werkzeuge is available to support selection and supply. Technical data Article number: 6808765 Manufacturer SKU: TUN6808765 Manufacturer item no: 6808765 Model series: ISO turning indexable inserts Designation: TPGA110202 Manufacturer: Tungaloy Facts Size: 11 mm Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Hole style: cylindrical Shape: triangular Special features Grade: TH10 Material: cemented carbide (uncoated) No chipbreaker For external and internal turning Suitable for non‑ferrous materials ISO standard geometry; compatible with appropriate holders FAQ Which materials suit this insert best? The TPGA110202 TH10 insert from Tungaloy is optimised for non‑ferrous materials such as aluminium, brass and copper alloys, where its sharp uncoated edge supports low cutting forces and a clean surface finish. What is the corner radius and why does it matter? The insert has a 0.2 mm corner radius; this small radius produces a finer surface finish and reduces cutting forces, which is beneficial for finishing passes and delicate components. How is compatibility with holders determined? Compatibility depends on match of form, relief angle (11°), tolerance class, fastening method, size (11 mm) and thickness (2.38 mm); the ISO geometry ensures straightforward selection when those parameters are aligned. Is the insert coated and what advantage does the grade provide? This product is uncoated and uses the TH10 sharp universal carbide grade, offering reduced cutting forces and improved results on softer, non‑ferrous materials where coating adhesion and built‑up edge are less favourable. What typical turning tasks is this insert used for? Common uses include external and internal turning operations that require fine surface finish and low cutting forces, such as finishing aluminium shafts, brass fittings or light‑duty precision components. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGA 110204 BX360 Wendeplatten - Tungaloy
Benefit from the BX360 CBN grade and a precise 0.4 mm corner radius for consistent, wear‑resistant finishing in hardened-steel turning. Order the inserts directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. TPGA 110204 BX360 – Turning indexable insert (TPGA110204) by Tungaloy TPGA 110204 BX360 is an ISO‑standard triangular turning insert engineered for high‑hardness finishing and reliable wear resistance in turning applications. CBN grade BX360 for hardened steels Triangular ISO form, 11 mm inscribed circle 0.4 mm corner radius for fine finishing Cylindrical hole for secure clamping High‑precision finishing on hardened materials The combination of cubic boron nitride (CBN) in the BX360 grade and the triangular geometry delivers consistently high surface quality when turning hardened steels. CBN is a superhard abrasive material optimised for machining steels at elevated hardness; it maintains edge stability under thermal and mechanical stress, which reduces rework and increases first‑pass yield. This makes the insert particularly suited to final‑pass operations where dimensional accuracy and surface finish are decisive. Predictable fit and clamping in ISO systems Manufactured to ISO dimensions, the insert fits standard triangular holders when the form, clearance angle and tolerance class match. The cylindrical hole ensures secure seating and repeatable indexation, while the 11° relief angle supports favourable cutting geometry for many holder designs. Clear specification of the insert geometry simplifies changeovers and reduces setup time, supporting stable production workflows. Durable edge life for consistent throughput The specification highlights durability: a carbide substrate with a CBN cutting phase in the BX360 grade provides resistance to abrasive wear typical of hard turning. The 0.4 mm corner radius balances edge strength with the ability to achieve fine surface finishes; this radius reduces the risk of edge chipping during interrupted cuts and contributes to longer tool life, lowering tool consumption and machine downtime. Practical application and selection guidance For optimal results, pair the insert with a holder matched to the TPGA form and ensure correct clamping torque. Select the BX360 variant when the workpiece material is hardened steel or when demanding finish quality is required; if machining cast iron is indicated by the process, verify the specific BX360 variant suitability. When in doubt about feed, speed or insert orientation for a particular setup, Metav Werkzeuge’s technical team can provide application guidance tailored to the machining task. For robust finishing of hardened steels, order TPGA110204 BX360 inserts from Metav Werkzeuge or contact our advisors at info@metav-werkzeuge.com / +49 2822 7131930 for application advice Technical Data Article number: 6808770-Tungaloy Manufacturer article number: 6808770 SKU: TUN6808770 Model series: ISO‑Drehwendeschneidplatten Application: Turning Facts Inscribed circle: 11 mm Plate thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Hole: with cylindrical hole Special features Material: carbide Cutting material: CBN (cubic boron nitride), grade BX360 Plate form: triangular Chipbreaker: none Compatibility: ISO‑standard insert for matched holders FAQ What materials is this insert intended for? The TPGA 110204 BX360 insert is designed primarily for hardened steels; the BX360 CBN grade also offers variants suitable for certain cast‑iron applications depending on the execution. How is the insert secured in the holder? The insert features a cylindrical hole for mechanical clamping; correct seating in a matching triangular ISO holder and proper clamping torque ensure stable indexing and repeatable performance. What surface finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius provides a balance between edge strength and finishing capability, enabling fine surface finishes in final passes while maintaining robust edge life. Is the insert suitable for interrupted cuts or grooving operations? The carbide substrate with a CBN cutting phase and the 0.4 mm corner radius offer improved resistance to chipping, making the insert more tolerant in interrupted cutting; suitability should be confirmed against the specific cutting conditions. Which holders are compatible with this ISO insert? Compatibility depends on matching the ISO TPGA form, 11° relief angle, tolerance class and size; use holders specified for triangular TPGA inserts and ensure the clamping system accepts a cylindrical‑hole style insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGA 110204 DX140 Wendeplatten - Tungaloy
High cutting speeds and extended tool life from the PCD DX140 grade combine with a precise 0.4 mm corner radius to deliver consistent, high‑quality results in non‑ferrous turning; order directly via Metav Werkzeuge or request application support from our consultants for an optimised production setup. TPGA110204 DX140 — ISO Turning Insert (PCD, 0.4 mm) by Tungaloy The TPGA110204 DX140 is an ISO‑standard triangular turning insert optimised for external and internal turning of aluminium, other non‑ferrous metals and abrasive non‑metals. PCD grade DX140 for high cutting speeds Triangle ISO insert with 60° geometry 0.4 mm corner radius for precise profiling Cylindrical-hole design; 2.38 mm thickness Maximised productivity for aluminium and non‑ferrous turning The PCD cutting layer in this insert enables high cutting speeds and excellent wear resistance when machining aluminium and similar materials. The polycrystalline diamond grade DX140 is engineered for sustained performance on abrasive non‑metals and non‑ferrous alloys, reducing downtime caused by frequent tool changes. By using a wear‑resistant cutting surface, the insert maintains consistent cutting conditions over long runs, which supports predictable cycle times and improves overall process efficiency. This makes the insert particularly suitable for high‑volume production where stable performance and reduced tool handling are decisive. Consistent geometry and secure clamping for repeatable results An ISO‑compliant triangular geometry with a 60° cutting angle ensures interchangeability with standard holders and repeatable tool orientation. The cylindrical hole and a plate thickness of 2.38 mm provide secure clamping and stable seat contact, reducing vibration and improving surface finish. Compatibility with the toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness, so the standardised shape supports quick insert swaps and predictable tool set‑up. Stable clamping directly contributes to dimensional accuracy and consistent part quality across batches. Accurate profiling and controlled chip formation A 0.4 mm corner radius gives fine control over profile definition and enables accurate finishing passes without excessive tool pressure. The insert is supplied without a chipbreaker, allowing users to select chip control solutions that match the workpiece material and machining conditions. In practice, this means the insert suits both roughing and finishing workflows provided the correct holder and operational parameters are chosen. Where chip control or surface requirements demand it, selecting an appropriate chipbreaker or adapting feed and speed will deliver the intended balance between material removal rate and surface integrity. Order original Tungaloy TPGA110204 DX140 inserts from Metav Werkzeuge for prompt delivery and tailored application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 for specific machining recommendations. Technical Data Article number: 6808769 SKU: 6808769-Tungaloy Manufacturer SKU: TUN6808769 Model series: ISO turning indexable inserts Core data Insert designation: TPGA110204 Grade: DX140 Corner radius: 0.4 mm Plate thickness: 2.38 mm Plate size: 11 mm Clearance angle: 11° Cutting angle: 60° Plate shape: triangular Special features Substrate material: carbide Cutting material: PCD (polycrystalline diamond) Hole style: cylindrical hole Chipbreaker: none Typical application: turning (external and internal) Recommended for: aluminium, non‑ferrous metals, abrasive non‑metals ISO‑standard insert for compatibility with corresponding holders FAQ Which materials is this insert best suited for? The TPGA110204 DX140 insert is intended for aluminium, other non‑ferrous metals and abrasive non‑metal materials; the PCD DX140 cutting layer provides the wear resistance required for these applications. Can this insert be used in standard ISO turning holders? Yes. The insert follows ISO geometry, but compatibility with a given holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. Does the insert include a chipbreaker? No, the insert is supplied without a chipbreaker; chip control should be selected according to the workpiece material and machining strategy. What are the key geometrical specifications for tool setting? The insert features a 60° cutting angle and a 0.4 mm corner radius, with a plate thickness of 2.38 mm and a triangular 11 mm size, enabling precise registration in the toolholder. What substrate and cutting materials are used in this article (SKU 6808769-Tungaloy)? The indexable plate uses a carbide substrate with a PCD cutting layer in grade DX140, combining substrate robustness with a wear‑resistant cutting surface for long tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com