CCGT 09T302 TH10 Wendeplatten - Tungaloy
The combination of a sharp TH10 uncoated carbide grade and the ISO rhombic 80° geometry ensures low cutting forces and consistent surface quality in turning operations; ideal for dependable non-ferrous machining. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CCGT 09T302 TH10 ISO turning insert (rhombic, 80°) – Tungaloy The CCGT 09T302 TH10 is an ISO-form indexable turning insert designed for general turning, offering a sharp universal grade for non-ferrous materials and applications where an uncoated cutting edge supports low cutting forces and clean surfaces. ISO 80° rhombic geometry Sharp TH10 uncoated carbide grade Single-sided chipbreaker design Compatible with standard ISO holders Consistent cutting performance for non-ferrous turning The rhombic 80° geometry delivers a reliable cutting angle that balances strength and access for a wide range of turning tasks. Combined with the uncoated carbide composition and the TH10 grade, this insert reduces cutting resistance and promotes steady chip formation when machining non-ferrous metals. The geometry supports stable tool forces, which translates into fewer vibrations and a more consistent surface finish, especially in less rigid setups. The single-sided chipbreaker helps control chip flow without the need for complex cooling strategies. Compatibility and installation that save setup time The insert follows ISO standards, so compatibility with many indexable toolholders is defined by shape, clearance angle, tolerance class, fastening and dimensions. The rhombic shape and the specified thickness of 3.97 mm mean the insert seats securely in typical ISO turning holders and drill bars. The insert’s cylindrical hole with one-sided countersink (40°–60°) enables secure fastening and straightforward replacement, reducing machine downtime and simplifying inventory management for shops that run multiple toolholder platforms. Low cutting forces and improved surface quality Because the cutting edge is uncoated and the grade is optimised as a sharp universal type, the insert generates low cutting forces and clean shearing in suitable materials. This characteristic makes it especially effective for turning operations on brass, aluminium alloys and other non-ferrous alloys where sticking or built-up edge can degrade finishes. The combination of edge geometry and chipbreaker promotes predictable chips and helps maintain a consistent contact zone on the workpiece, improving repeatability from one part to the next. Material specification and practical application guidance Made from solid carbide, the insert is intended for turning applications where an uncoated edge benefits process stability and surface integrity. The single-sided chipbreaker design and the TH10 grade are chosen to match common turning tasks in non-ferrous materials and situations that demand low cutting forces rather than extreme wear resistance. When selecting a holder, ensure matching of form, clearance angle (7°), size and thickness to maintain accuracy; appropriate holder selection secures the repeatable performance expected from ISO indexable systems. Contact Metav Werkzeuge for a tailored application check of the Tungaloy TH10 insert and to confirm stock availability via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6801337 SKU: 6801337-Tungaloy Designation: CCGT09T302 Series: ISO turning inserts Material: carbide Facts Corner radius: 0.2 mm Insert size: 09 Thickness: 3.97 mm Clearance angle: 7° Insert angle: 80° Special features Rhombic insert shape Single-sided chipbreaker Uncoated carbide, grade TH10 Cylindrical hole with one-sided countersink (40°–60°) Intended application: turning FAQ What materials is this insert suited for? The CCGT09T302 TH10 Tungaloy indexable turning insert (SKU 6801337-Tungaloy) is optimised for non-ferrous materials such as aluminium and brass, where a sharp, uncoated edge reduces cutting forces and improves surface quality. How does the chipbreaker affect machining? The single-sided chipbreaker on the CCGT09T302 TH10 insert promotes controlled chip formation and evacuation, which supports steady cutting conditions and consistent finishes during turning operations. Which toolholders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and size; this ISO-format insert is designed to fit standard ISO turning holders that accept an 09-size rhombic insert with the specified thickness. Is this insert suitable for finishing cuts? Yes, the sharp TH10 uncoated carbide grade supports finishing operations on appropriate materials by reducing cutting forces and helping to produce a clean surface finish. What is the purpose of the insert’s hole and countersink design? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and accurate repeatable positioning in indexable toolholders, simplifying replacement and reducing setup variation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated carbide grade and ISO compatibility to achieve low cutting forces and clean surface finishes in non-ferrous turning; order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. CCGT09T302 TH10 indexable turning insert — Tungaloy The CCGT09T302 TH10 is an ISO-standard rhombic insert designed for external and internal turning, offering a sharp uncoated carbide edge for low cutting forces and improved surface quality ISO-standard rhombic insert for turning Uncoated carbide grade TH10 for clean cuts 0.2 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink High-efficiency turning of non-ferrous materials The insert is built around the TH10 uncoated carbide grade, optimised for applications where a sharp edge reduces cutting forces and improves the workpiece finish. This grade is particularly effective for aluminium and other non-ferrous alloys, where low friction and minimal built-up edge are decisive. The result is a combination of reduced cutting forces and consistent surface quality, which contributes directly to shorter cycle times and lower tool-change frequency on production runs. Seamless integration into existing ISO tool systems Built to ISO geometry, the indexable insert offers predictable fitment: a rhombic 09 size, 80° included angle and a 7° clearance ensure compatibility with a wide range of holders. Thickness is 3.97 mm and the plate is supplied with a cylindrical hole plus one-sided countersink (40°–60°) for secure clamping. These measurable characteristics make retrofit and replacement straightforward, minimising downtime and simplifying tool inventory management on the shop floor. Precision finishing and chip control in turning operations A 0.2 mm corner radius combined with a single-sided chipbreaker supports fine finishing passes and controlled chip formation. For both external and internal turning tasks, this geometry helps maintain dimensional accuracy and surface integrity when machining less rigid setups or thin-walled components. The insert forms one part of a complete system — the ISO insert, a matching external holder or boring bar, the correct shim/clamp set and spare fastening screws — which together determine final process stability. Practical guidance for selection and use Select the TH10 grade where non-ferrous materials or machining conditions favour an uncoated edge; choose a compatible chipbreaker and insert size according to workpiece material, cutting parameters and machine stability. The insert’s uncoated carbide composition is straightforward to inspect and resharpening or replacement decisions can be based on visible flank wear and edge condition, helping to maintain process reliability without overcomplicating maintenance routines. For application-specific advice or to procure the Tungaloy CCGT09T302 TH10 insert, please contact Metav Werkzeuge — our specialists can recommend the optimal holder and parameters for the intended turning task; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer: Tungaloy Manufacturer article number: 6801327 Manufacturer SKU: TUN6801327 Label: CCGT09T302 TH10 Tungaloy-indexable insert Model series: ISO turning indexable inserts Core specifications Corner radius: 0.2 mm Thickness: 3.97 mm Clearance angle: 7° Included angle: 80° Size: 09 Materials & special features Material: carbide (uncoated) Grade: TH10 Chipbreaker: single-sided Hole: with hole; cylindrical + one-sided countersink (40°–60°) Plate shape: rhombic Typical application: turning; external and internal System components: matching holder or boring bar, shim/clamp set, spare screws FAQ What materials is this insert best suited for? The insert is optimised for non-ferrous alloys; the TH10 uncoated carbide grade supports low cutting forces and clean finishes when machining aluminium and similar materials. How does the 0.2 mm corner radius affect machining? A 0.2 mm corner radius provides a balance between edge strength and fine surface quality, making the insert suitable for finishing and semi-finishing passes where dimensional control is required. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO geometry (rhombic 09, 80° included angle, 7° clearance) and is intended for use with appropriate ISO external holders or boring bars and the correct clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of precise ISO compatibility, sharp TH10 uncoated carbide cutting edges and a compact rhombic geometry for consistent turning results. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific setup. CCGT 09T302 TH10 indexable turning insert — Tungaloy — uncoated carbide, R0.2 CCGT09T302 TH10 Tungaloy indexable insert for general turning, offering an ISO-standard form and a single-sided chipbreaker for clean cuts in non-ferrous materials ISO series CCGT 09T302 indexable insert TH10 uncoated carbide for non-ferrous materials Rhombic 80° form with 0.2 mm nose radius Consistent cutting with low forces and superior surface quality The TH10 grade is an uncoated carbide engineered as a sharp universal grade that reduces cutting forces and promotes a clean surface finish when machining non-ferrous materials and similar applications. This results in lower power demand and reduced vibration during machining, which helps to maintain dimensional stability in production runs. The sharp cutting edge supports delicate chip formation while the single-sided chipbreaker contributes to controllable swarf flow, translating technical properties into measurable productivity gains. ISO-standard geometry that simplifies tooling selection and set-up Designed as part of an ISO series, the rhombic geometry with an included angle of 80° and a 0.2 mm nose radius ensures predictable engagement with compatible holders. Compatibility is defined by the insert form, relief angle, tolerance class, fixing method, size and thickness; this allows straightforward interchangeability in standard external and internal turning toolholders. The insert is supplied with a hole featuring a cylindrical bore and a one-sided countersink (40°–60°), facilitating secure clamping and reproducible seating on the tool body. Application-focused design for productive turning Intended primarily for turning operations, the insert performs well in both external and internal turning when the correct chipbreaker and grade are selected for the workpiece and cutting conditions. The uncoated carbide edge offers advantages where low cutting forces and minimal built-up edge are priorities. The compact plate thickness of 3.97 mm and rhombic shape support stable cutting in interrupted cuts and allow for economical use in high-mix production environments. For machining strategies where tool change speed and repeatability matter, this design contributes directly to shorter cycle times and consistent part quality. Contact Metav Werkzeuge for tailored tooling recommendations or to request technical clarification on fitment and cutting data for the Tungaloy CCGT 09T302 TH10 indexable insert — Metav Werkzeuge will provide application-oriented advice and supply options. Technical data Article number: 6801334 Manufacturer SKU: TUN6801334 Model series: ISO-Drehwendeschneidplatten Application: Turning Material: Carbide Designation: CCGT09T302 TH10 Plate shape: rhombic Plate size: 09 Core data Nose radius: 0.2 mm Thickness: 3.97 mm Included angle: 80° Relief angle: 7° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Single-sided chipbreaker Uncoated cutting edge (TH10) ISO-standardised indexable insert Suitable for external and internal turning Compact geometry for stable cutting FAQ Which materials is the insert suitable for? The CCGT09T302 TH10 Tungaloy indexable insert is optimised for non-ferrous materials and similar applications where an uncoated, sharp cutting edge supports low cutting forces and a clean surface finish. Can this insert be used for both external and internal turning? Yes, the CCGT09T302 TH10 insert is designed for turning operations and can be applied to both external and internal turning when paired with a compatible ISO holder and appropriate cutting parameters. How is the insert secured in the toolholder? The insert features a cylindrical hole with a one-sided countersink (40°–60°) to enable secure clamping in holders designed for ISO rhombic CCGT shapes; compatibility depends on holder form, fixing method and tolerance. What are the key dimensions to consider? Key dimensions for the CCGT09T302 TH10 insert include a nose radius of 0.2 mm, plate thickness of 3.97 mm and an included angle of 80°, which should match the holder specifications. Is the insert coated or uncoated and what are the implications? The TH10 grade is an uncoated carbide; the lack of coating reduces cutting forces and can improve surface finish in non-ferrous materials, while offering a sharp cutting edge for precise, low-force machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of reliable process security, a universal PVD-coated grade and precise geometry to ensure consistent turning results across mixed steel batches; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. CCGT09T304 AH725 – ISO turning insert CCGT for turning, PVD-coated carbide, 0.4 mm radius by Tungaloy The CCGT09T304 AH725 is an ISO-standard rhombic turning insert designed for external and internal turning applications, offering universal, breakage-resistant performance for steel and stainless steels. ISO rhombic turning insert CCGT09T304 PVD-coated AH725 carbide grade 0.4 mm corner radius for consistent profiles Cylindrical hole with one-sided countersink Designed for external and internal turning Stable process security for mixed steel production The combination of a PVD-coated surface and the AH725 grade provides a balance between toughness and wear resistance that supports stable machining across varying steels, including stainless variants. The coating reduces adhesive wear and supports higher cutting temperatures, which results in fewer unexpected tool changes and a more predictable production rhythm. As a consequence, cycle times become more reliable and scrap rates are decreased, particularly where batch materials vary or component geometries demand consistent tool life. Geometry engineered for repeatable part quality A 0.4 mm corner radius and an 80° lead angle on the rhombic profile maintain form accuracy and enable controlled chip formation at the cutting edge. The one-sided chipbreaker is matched to the grade to assist chip control during both external and internal turning, reducing the risk of built-up edge on stainless steels and tough alloys. The geometry supports a repeatable surface finish and dimensional stability, so finishing passes are minimised while tolerances remain tight. Simple mechanical integration and robust clamping Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening, size and thickness; the insert’s with-hole design and the specified cylindrical hole with one-sided countersink (40°–60°) ensure secure seating and straightforward fixation in common ISO CCGT holders. The 3.97 mm plate thickness and size 09 fit many standard external holders and boring bars, facilitating fast changeover and reliable torque transfer. This predictable fit helps maintain consistent cutting conditions across shifts and operators. Reduced process risk through material choice and coating Manufactured from fine-grain carbide and finished with a PVD layer, the insert combines fracture resistance with edge stability, making it suitable for smaller tools and operations where process safety is critical. In short, the grade selection and coating strategy reduce the incidence of edge chipping and improve overall tool life when machining medium to high-strength steels and stainless steels, particularly under variable machining conditions. Application-focused guidance for planners and operators For external and internal turning tasks where material groups change or where high process reliability is required, this insert offers a pragmatic compromise between economy and performance. Selection of feed, depth of cut and holder rigidity should reflect the intended material and machining strategy; the insert’s universal character simplifies tooling inventories while preserving performance. Compatibility checks against holder geometry and clamping method are recommended prior to series use. For dependable, versatile turning performance from Tungaloy’s AH725 grade, contact Metav Werkzeuge for ordering and application guidance — Metav Werkzeuge can provide compatibility checks and tailored recommendations. Technical Data Article number: 6857019 Manufacturer SKU: TUN6857019 SKU: 6857019-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Material: Carbide Grade: AH725 Dimensions & Geometry Corner radius: 0.4 mm Insert size: 09 Thickness: 3.97 mm Insert shape: Rhombic Lead angle: 80° Clearance angle: 7° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Coating, Compatibility & Use Coating: PVD Compatible for: Steel and stainless steels Typical use: External and internal turning Chipbreaker: one-sided Cutting material: PVD-coated carbide FAQ What materials is the CCGT09T304 AH725 best suited for? The CCGT09T304 AH725 insert is engineered for machining steel and stainless steels, offering a universal, breakage-resistant performance suited to mixed-material production. How does the PVD coating affect tool life? The PVD-coated AH725 grade boosts wear resistance and reduces adhesive wear at elevated temperatures, which extends tool life under standard turning conditions. Which holders are compatible with this insert? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening, size and thickness; the CCGT09T304 is designed to seat in standard ISO CCGT holders with corresponding clamping systems. What chip control can be expected with the one-sided chipbreaker? The one-sided chipbreaker, matched to the AH725 grade, supports controlled chip formation for both external and internal turning, improving evacuation and reducing re-cutting. Are there any special considerations for stainless steels? When machining stainless steels, the PVD coating and robust carbide substrate of this insert help minimise built-up edge; however, cutting parameters should be adapted to material toughness and thermal conductivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 AT9530 Wendeplatten - Tungaloy
Take advantage of the AT9530 cermet grade and ISO geometry for improved surface finish and consistent wear; the precise 0.4 mm corner radius and single-sided chipbreaker ensure reliable chip control during finishing and light machining of steel. Order directly via Metav Werkzeuge or consult our specialists for application matching. CCGT 09T304 AT9530 — Turning insert (ISO CCGT09T304) by Tungaloy, cermet finishing grade, 0.4 mm radius, 7° relief A CCGT09T304 AT9530 indexable insert for turning, optimised for finishing and light machining of steel with ISO-compatible geometry and secure clamping. Cermet grade AT9530 for superior finish ISO CCGT09T304 geometry, rhombic 80° shape 0.4 mm corner radius for fine turning Single-sided chipbreaker for stable chips Cylindrical hole with 40°–60° countersink Outstanding surface quality and predictable tool life The insert combines a coated cermet substrate with the AT9530 grade to prioritise surface finish and even wear over extended cycles. Cermet materials reduce built-up edge and deliver a fine, consistent surface in finishing passes; this means fewer downstream operations and less rework. The 0.4 mm corner radius is selected to balance a fine cutting edge with strength, producing accurate profile control without sacrificing life span. Predictable flank wear reduces process variation and supports stable batch production. Consistent chip control and machining stability A single-sided chipbreaker paired with the rhombic, 80° geometry promotes controlled chip formation during external and internal turning, reducing the risk of snarled chips and machine interruptions. The insert’s 7° relief improves shear conditions on light cuts, lowering cutting forces and vibration. These features translate into fewer stops for cleaning or manual intervention and a smoother cycle time in high-mix or repetitive operations, enhancing overall shop-floor efficiency. ISO compatibility and secure clamping for safe operation Designed as an ISO-standard turning insert, the plate is defined by form, relief angle, tolerance class, fastening method, size and thickness to ensure compatibility with suitable toolholders and boring bars. The cylindrical hole with single-sided countersink (40°–60°) enables reliable centring and positive clamping, while the 3.97 mm thickness provides a stable support surface under clamping loads. This combination reduces micro-movement at the cutting edge and supports repeatable set-ups across multiple holders and machines. Practical application advice and material suitability Engineered specifically for finishing and light machining of steel, the AT9530 coating emphasises balanced wear and consistent performance across common steel grades. In practice, select cutting data that favour finishing feeds and moderate depths of cut to exploit the grade’s strengths: improved surface integrity and lower tendency for built-up edge. The insert is ideal where surface quality and repeatability are valued over heavy stock removal, helping to shorten inspection and finishing times while maintaining throughput. Contact Metav Werkzeuge for tailored machining recommendations on the Tungaloy AT9530 cermet insert and arrange technical matching via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6967289 SKU: 6967289-Tungaloy Manufacturer SKU: TUN6967289 Manufacturer: Tungaloy Numbers / Core technical data ISO designation: 09T304 Insert designation: CCGT09T304 Corner radius: 0.4 mm Relief angle: 7° Insert thickness: 3.97 mm Shape/approach angle: rhombic / 80° Designs / Special features Coating / grade: AT9530 Substrate: cemented carbide (coated cermet) Chipbreaker: one-sided Hole: with cylindrical hole + single-sided countersink (40°–60°) Typical application: turning — finishing and light machining of steel System composition: ISO insert, suitable external holder or boring bar, support/clamping set and replacement screws FAQ What materials is this insert suitable for? The insert is specified for finishing and light machining of steel; the AT9530 coated cermet offers improved surface finish and uniform wear when turning steel grades. Which insert geometry does the product use? This is an ISO-format rhombic insert in the CCGT series (CCGT09T304) with an 80° approach angle and a 0.4 mm corner radius for fine turning tasks. How does the chipbreaker affect machining? The single-sided chipbreaker on the Tungaloy insert promotes controlled chip formation and reliable evacuation, reducing interruptions and improving process stability. Will the insert fit my holder? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; the ISO CCGT geometry ensures broad compatibility with standard holders designed for CCGT inserts. What clamping features ensure secure mounting? The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to provide positive centring and stable clamping under normal turning loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 GH110 Wendeplatten - Tungaloy
Achieve productive, reliable turning with the combination of Tungaloy's GH110 wear resistance and the ISO CCGT09T304 geometry; precise clamping and a rhombic profile support consistent surface finish and long tool life. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. CCGT09T304 GH110 ISO indexable turning insert for turning by Tungaloy CCGT09T304 GH110 is an ISO‑standard rhombic indexable insert designed for external and internal turning, offering a balanced mix of wear resistance and edge stability for productive machining. ISO CCGT geometry for standard holders Tungaloy GH110 grade for wear resistance Rhombic insert with 80° included angle Single-sided chipbreaker for stable cutting Productive wear resistance for demanding turning operations The GH110 grade, developed by Tungaloy, combines hardness and toughness to extend edge life during continuous turning. This carbide‑based grade resists abrasive wear while maintaining sufficient fracture resistance, which results in fewer index changes and reduced tool cost per component. The included single-sided chipbreaker helps to control chip form and evacuation, reducing the risk of surface damage and machine downtime. For shops seeking reliable removal rates and predictable tool life, this geometry and grade pairing supports consistent production cycles. Precise geometry that eases setup and improves consistency The rhombic shape with an 80° included angle and a 0.4 mm corner radius provides a stable cutting footprint and consistent contact with the workpiece. A 7° clearance angle reduces rubbing and heat generation at the flank face, improving surface finish and dimensional stability. The standard ISO designation ensures compatibility with a wide range of external holders and boring bars when matched by form, tolerance class, fastening and thickness. The insert’s 3.97 mm thickness contributes to rigidity in the clamping system, which helps to maintain repeatable results across batches. Easy integration and application guidance for varied materials Configured with a cylindrical hole plus a one‑sided countersink (40°–60°), the insert fits common clamping systems while allowing secure and repeatable fixation. The single‑sided chipbreaker is suitable for many steels and alloyed materials where controlled chip flow and edge protection are priorities. As an ISO‑standard insert in a clear designation, it simplifies tool inventory and minimises set‑up time for turning tasks. For operators less familiar with inserts, the terms used here—such as chipbreaker (feature to shape chips), clearance angle (angle preventing flank rubbing) and corner radius (affects strength and finish)—explain how geometry influences machining results. Request cutting data or a quotation from Metav Werkzeuge for tailored machining parameters and procurement of the CCGT09T304 GH110 insert; Metav Werkzeuge’s technical advisors are available to advise on holder compatibility and optimal cutting conditions Technical Data Article number: 6801340 SKU: 6801340-Tungaloy Manufacturer SKU: TUN6801340 Model series: ISO turning inserts Name: CCGT09T304 GH110 Tungaloy insert Facts Size: 09 Plate thickness: 3.97 mm Included angle: 80° Corner radius: 0.4 mm Clearance angle: 7° Hole: with hole; cylindrical hole + one-sided countersink 40°–60° Special features Material: carbide Grade: GH110 (Tungaloy) Shape: rhombic Chipbreaker: single-sided Application: turning Compatibility: ISO holders determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CCGT09T304 GH110 insert is a carbide grade engineered for general turning tasks; the GH110 grade performs well on a broad range of steels and alloyed materials where wear resistance and edge stability are needed. How does the chipbreaker affect machining? The single‑sided chipbreaker on this insert assists in forming short, manageable chips and protecting the cutting edge, which enhances process reliability during continuous turning operations. Which holders are compatible with this insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; the ISO CCGT designation ensures wide support among standard external and internal turning holders. What does the designation CCGT09T304 mean? The designation indicates a rhombic ISO insert geometry with size 09 and the specific geometry and hole style encoded in 09T304; CCGT09T304 identifies the shape and mounting features for correct holder matching. Is the insert supplied with screws or clamps? The listing specifies the insert itself; corresponding holders, clamping sets and replacement screws are part of the standard system build and should be sourced to match the ISO holder and mounting requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 GH330 Wendeplatten - Tungaloy
Reliable performance and consistent tool life result from the combination of Tungaloy’s GH330 grade and ISO rhombic geometry; the 0.4 mm corner radius and 7° clearance support stable edge contact in external and internal turning. Order the insert directly via Metav Werkzeuge or consult our specialists for grade and holder compatibility. CCGT09T304 GH330 CCGT — Turning Insert (Tungaloy) Rhombic ISO plate, 0.4 mm corner radius The CCGT09T304 GH330 is an ISO rhombic indexable insert intended for turning applications, offering a single-sided chipbreaker and a cylindrical hole with a one-sided countersink for secure clamping. ISO rhombic insert, size 09 GH330 grade for wear resistance 0.4 mm corner radius 7° clearance angle Cylindrical hole with countersink High wear resistance and predictable tool life for turning Manufactured from cemented carbide and specified in the GH330 Tungaloy grade, this insert is engineered to balance hardness and toughness for repeated turning cycles. The substrate and grade selection improve resistance to flank and crater wear, helping to maintain cutting-edge geometry over longer runs. This results in fewer insert changes and a more predictable production rhythm, supporting continuous machining and reduced downtime. Secure mounting and ISO compatibility reduce setup risk The insert conforms to ISO plate geometry and uses a cylindrical hole with countersink (40°–60°) to ensure consistent seating in compatible holders. The rhombic shape and defined 7° clearance angle reduce interference with the workpiece during entry and exit, while the plate thickness of 3.97 mm and standard tolerances simplify the selection of mating external holders or boring bars. The result is reliable clamping, repeatable location and reduced rework due to mounting errors. Chip control and edge stability for efficient material removal Equipped with a single-sided chipbreaker, the geometry promotes controlled chip formation in common turning tasks; this supports uninterrupted swarf evacuation and reduces the risk of entanglement on the tool or workpiece. The 0.4 mm corner radius provides a reinforced cutting edge that tolerates moderate interrupted cuts and contributes to surface finish quality during external and internal turning. For different workpiece materials and process stabilities, selecting the appropriate chipbreaker and grade variant is recommended to match feed and depth of cut. Practical advantages that support productive machining As a member of the ISO turning insert family, the plate simplifies inventory management: standard form factors and sizes facilitate replacement across machines. Consistent edge condition from the GH330 grade promotes steady component quality, while the combination of geometry and material supports higher material removal rates where process stability allows. Using standardised inserts also streamlines operator training and inspection routines, contributing to overall shop-floor efficiency. Contact Metav Werkzeuge today for application advice and to order the Tungaloy CCGT09T304 GH330 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6801341 SKU: 6801341-Tungaloy Manufacturer SKU: TUN6801341 Model series: ISO turning indexable inserts Material: cemented carbide Facts Plate size: 09 Plate thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Special features Rhombic plate form Single-sided chipbreaker Cylindrical hole + one-sided countersink (40°–60°) GH330 Tungaloy grade Intended use: turning ISO-standard geometry; compatible with ISO holders FAQ What turning tasks is this insert best suited for? The CCGT09T304 GH330 insert is designed for external and internal turning; its geometry and chipbreaker make it suitable for general-purpose turning where a balance of wear resistance and edge stability is required. Which holders accept this insert? Holders and boring bars that match ISO rhombic plate form and accept size 09 plates with a cylindrical hole and countersink will be compatible; ensure the holder’s form, clearance angle and tolerance class match the insert. How does the GH330 grade affect performance? GH330 provides a balance of wear resistance and toughness, which helps the insert maintain cutting-edge stability over longer runs and supports reproducible component quality. Can the insert handle interrupted cuts? The 0.4 mm corner radius increases edge robustness and offers improved tolerance to moderate interruptions; however, process parameters should be adapted to the workpiece and stability conditions. Is there guidance for choosing the chipbreaker? Select the chipbreaker type according to material, feed and depth of cut; the single-sided chipbreaker on this insert supports controlled chip formation in many turning operations, but optimising the breaker to the specific workpiece enhances productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of precision geometry, coated cermet wear resistance and straightforward mounting for reliable turning productivity; order the CCGT09T304 GT9530 indexable turning insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT 09T304 GT9530 indexable turning insert for turning — Tungaloy The CCGT09T304 GT9530 is an ISO-format indexable turning insert designed for external and internal turning, offering an 80° rhombic geometry and a wear-resistant coated cermet grade for improved surface quality under stable conditions. ISO-indexable rhombic insert, 80° geometry Cermet grade GT9530 for enhanced wear resistance 0.4 mm nose radius for fine surface finish Compatible with standard ISO turning holders Consistent cutting performance for turning operations The CCGT09T304 GT9530 is engineered to deliver repeatable machining results in turning applications where surface quality and tool life matter. Its 80° rhombic geometry combines stiffness and accessibility, making it suitable for both external and light internal turning. The insert’s 0.4 mm nose radius ensures controlled contact with the workpiece, improving dimensional stability and reducing rework. Designed for use with a standard clamping arrangement and a cylindrical hole with a single-sided countersink, the insert facilitates secure seating and fast replacement, which supports continuous production with minimal downtime. Improved surface finish and longer edge life with coated cermet The core advantage of the GT9530 grade is its coated cermet composition, optimised for finishing to light universal cuts in steel. The coating enhances wear resistance at the cutting edge and helps maintain edge geometry over extended cycles, producing a fine surface finish without aggressive cutting parameters. In practical terms, the grade performs best under stable cutting conditions, where moderate feeds and controlled cutting speeds allow the cermet coating to resist abrasion and oxidation. Where a better surface and longer service intervals are required, this grade represents a cost-effective choice compared with standard uncoated inserts. Practical compatibility and efficient chip control Mounting and chip control are decisive for process reliability. The insert’s one-sided chipbreaker is tuned for turning tasks in steel, promoting predictable chip flow and reducing the risk of entanglement on the toolholder. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°), allowing fixation with common ISO clamping systems; this ensures broad toolholder compatibility in modern turning tool posts and boring bars. Selecting a matching holder, shim and replacement screw improves clamping stability and repeatability, supporting higher material removal rates while preserving insert life. Contact Metav Werkzeuge for tailored machining recommendations on the Tungaloy CCGT09T304 GT9530 indexable turning insert and to request compatible holder and clamping options Technical data Article number: 6997865 SKU: 6997865-Tungaloy Manufacturer SKU: TUN6997865 Model series: ISO indexable turning inserts Label: CCGT09T304 GT9530 Tungaloy insert Facts Geometry: 80° Nose radius: 0.4 mm Relief angle: 7° Plate thickness: 3.97 mm Insert size: 09 Design and special features Coating/grade: GT9530 (coated cermet) Substrate/material: carbide Plate form: rhombic Chipbreaker: one-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Suitable application: turning (external and internal) Compatibility: ISO-standard turning holders FAQ What materials is this insert best suited for? The Tungaloy CCGT09T304 GT9530 indexable turning insert is optimised for machining steel in finishing to light universal operations, with the GT9530 coated cermet delivering improved wear resistance and surface quality. Can this insert be used for internal turning? Yes, the rhombic 80° geometry of the CCGT09T304 allows use in both external and certain internal turning applications, provided the holder offers sufficient access and stability. How does the GT9530 grade compare to standard inserts for surface finish? The GT9530 coated cermet offers superior edge stability and reduced abrasion versus many standard grades, enabling a finer surface finish at comparable cutting parameters when machining steel under stable conditions. What clamping specifications are required for secure mounting? The insert uses a cylindrical hole with a one-sided countersink (40°–60°); compatible ISO turning holders with the corresponding clamp and shim deliver reliable clamping and repeatable positioning. Is the 0.4 mm nose radius suitable for finishing work? Yes, the 0.4 mm nose radius on this indexable insert is intended to produce fine surface quality while maintaining sufficient edge strength for finishing and light universal turning cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 KS05F Wendeplatten - Tungaloy
Combining the KS05F wear-resistant grade with the precise 0.4 mm corner radius and ISO‑standard rhombic geometry results in consistent chip control and dependable surface quality for turning operations; order the insert directly via Metav Werkzeuge or consult their specialists for machining guidance. CCGT 09T304 KS05F — Tungaloy turning insert (ISO rhombic, 80°) CCGT 09T304 KS05F is an ISO‑standard rhombic indexable insert for external and internal turning, designed to balance wear resistance and edge stability ISO‑standard rhombic insert CCGT KS05F grade for wear resistance 0.4 mm corner radius for fine finishing Cylindrical hole with single‑side countersink Consistent productivity through material and grade The combination of a Tungaloy carbide grade and the KS05F specification ensures reliable tool life under a broad range of turning conditions. The grade is formulated to balance wear resistance and toughness, which supports stable cutting over longer tool cycles and reduces unexpected downtime. By favouring a material mix that handles both interrupted and continuous cuts, the insert offers clear economic advantages: fewer indexings and more consistent component dimensions, translating into improved process efficiency and predictable output. Precision geometry for accurate surface results The rhombic shape with an included angle of 80° and a relief (free) angle of 7° gives predictable tool engagement and facilitates controlled chip flow. The 0.4 mm corner radius contributes to refined surface finishes without compromising edge strength, making the insert suitable for finishing passes as well as light roughing where a small radius is required. The plate thickness of 3.97 mm supports rigidity in the clamping zone, helping to maintain cut stability and repeatable part quality even under varying machining forces. Secure clamping and system compatibility This ISO indexable insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) for secure fastening to compatible external holders or boring bars. Compatibility is determined by form, relief angle, tolerance class, fastening style, size and thickness, so matching the correct holder ensures maximum stability and repeatable seating. The single‑sided chipbreaker provides consistent chip control for many common steel and alloy turning tasks, simplifying process setup and reducing the need for constant parameter adjustments. Contact Metav Werkzeuge for application advice and availability of the Tungaloy KS05F turning insert; specialists at Metav Werkzeuge can recommend the optimal holder combination and cutting data for each machining task Technical data Article number: 6822275-Tungaloy Manufacturer article number: 6822275 Manufacturer SKU: TUN6822275 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Facts Insert designation: CCGT09T304 Size: 09 Included angle: 80° Relief angle: 7° Corner radius: 0.4 mm Thickness: 3.97 mm Special features Grade: KS05F (Tungaloy carbide) Shape: rhombic Hole style: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Typical use: external and internal turning System components: ISO insert, matching external holder or boring bar, clamp/support and replacement screws FAQ What materials is this insert suitable for? The CCGT09T304 KS05F insert from Tungaloy is optimised for a wide range of turning tasks and is particularly suitable for common steels and alloyed materials due to the KS05F carbide balance of wear resistance and toughness. How does the 0.4 mm corner radius affect finishing? A 0.4 mm corner radius on the Tungaloy indexable insert reduces edge stress while producing improved surface finish on finishing passes; it also helps to extend edge life compared with extremely small radii. Is the insert compatible with standard holders? The insert follows ISO geometry; compatibility depends on matching form, relief angle, tolerance class, fastening style, size and thickness. Using a holder specified for CCGT 09 inserts ensures correct seating and clamping stability. What does the cylindrical hole with countersink provide? The cylindrical hole with a single‑side countersink (40°–60°) secures the insert reliably in the pocket and helps to maintain repeatable positioning under machining loads. Can this insert be used for both roughing and finishing? Yes — the KS05F grade and the insert’s geometry make it versatile for light roughing and finishing operations, with the small corner radius favouring accurate finishes and the grade supporting wear resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 NS9530 Wendeplatten - Tungaloy
Conflicting product information detected: the insert is described both as cemented carbide and as an uncoated cermet; please verify the technical specification before publication to ensure accuracy and consistency, as discrepancies in material descriptions can lead to misunderstandings or errors in usage, potentially affecting performance, customer satisfaction, and overall reliability of the product; it is essential to cross-check all details with the manufacturer or technical documentation to confirm whether the insert is indeed made of cemented carbide, which is known for its hardness and wear resistance, or if it is an uncoated cermet, which typically offers a balance of toughness and heat resistance, to avoid any confusion.
CCGT 09T304 NS9530 Wendeplatten - Tungaloy
Benefit from the NS9530 finishing grade and the precise rhombic geometry for low cutting forces and superior surface quality; order the CCGT09T304 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT09T304 NS9530 turning insert for finishing (Turning) by Tungaloy A CCGT09T304 NS9530 indexable turning insert engineered for finishing operations on steel, offering low cutting forces and excellent surface integrity Finishing cermet NS9530 grade Sharp cutting edge for low forces Rhombic ISO shape CCGT 09, 80° 0.4 mm corner radius, 7° relief angle Consistent finishing and improved surface integrity The uncoated NS9530 cermet is a finishing grade developed to deliver high surface quality with minimal cutting forces. Its composition and sharp edge geometry reduce built-up edge formation and produce smoother part surfaces during continuous cutting conditions. For operations with small depths of cut, the grade helps maintain dimensional stability and reduces the need for subsequent polishing or rework, supporting a more efficient production flow. Precise geometry for reliable mounting and predictable results The rhombic CCGT form with an 80° included angle, a 0.4 mm corner radius and a 7° relief angle ensures consistent cutting conditions and predictable contact with the workpiece. The insert thickness of 3.97 mm and the cylindrical hole with a single-sided countersink (40°–60°) are designed for secure clamping in ISO-compatible holders. Compatibility is determined by holder form, relief angle, tolerance class, fastening method, size and thickness; this ensures repeatable results when the correct carrier is selected. Operational advantages and measurable productivity gains Using a finishing-grade cermet like NS9530 reduces cutting forces and helps achieve target surface finishes in fewer passes, which shortens cycle times and lowers unit cost. The one-sided chipbreaker is tailored for continuous cutting modes, improving chip control and contributing to process stability. Where surface finish and component tolerance matter, the combination of sharp edge geometry and a fine-grain cermet substrate offers a quantifiable reduction in downstream finishing effort. Application guidance and selection criteria Designed primarily for external and internal turning, the insert performs best in steady, uninterrupted cuts and modest depths of cut. Select a chipbreaker and grade that match the workpiece material and the machine-tool setup; the NS9530 sort is best suited for steels where a sharp edge and low cutting forces are required. For interrupted cuts or highly abrasive materials, consider alternative grades or coated variants suited to those conditions. Contact Metav Werkzeuge for technical advice and fast availability of Tungaloy finishing inserts such as the CCGT09T304 NS9530 Technical Data Article number: 6714355 SKU: 6714355-Tungaloy Manufacturer SKU: TUN6714355 Manufacturer: Tungaloy Series: ISO turning indexable inserts Designation: CCGT09T304 NS9530 Core technical data Size: 09 Insert thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Hole: cylindrical hole + single-sided countersink (40°–60°) Special features Uncoated cermet grade NS9530 Finishing grade for steel; ideal for continuous cuts and small depths One-sided chipbreaker Rhombic insert form (CCGT) Compatibility: dependent on holder form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The CCGT09T304 NS9530 is a finishing-grade cermet engineered primarily for machining steel where a fine surface finish and low cutting forces are required. Is the NS9530 grade coated? No, the NS9530 grade is supplied uncoated; its fine-grain cermet substrate and sharp edge are optimised for finishing applications under continuous cutting. Which operations suit the rhombic geometry? The rhombic CCGT form is suitable for both external and internal turning, especially where an 80° included angle and a small corner radius support precise contouring and surface integrity. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius balances edge strength and surface finish: it helps avoid premature chipping while maintaining the fine finish expected from a finishing grade at small depths of cut. How is clamp and holder compatibility ensured? Compatibility depends on holder form, relief angle, tolerance class, fastening system, insert size and thickness; the CCGT09T304 designation follows ISO conventions to help match the correct holder and clamping kit. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, the NS9530 uncoated cermet grade and ISO compatibility for consistent finishing results; this insert reduces cutting forces while improving surface quality. Order original Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application advice. CCGT 09T304 NS9530 ISO turning insert — finishing grade (Tungaloy) CCGT 09T304 NS9530 is an ISO‑standard rhombic turning insert designed for finishing turning of steel with a sharp, uncoated cermet cutting edge and a 0.4 mm nose radius. NS9530 cermet, uncoated finishing grade Sharp edge for low cutting forces Rhombic ISO CCGT 09T304, 80° geometry Cylindrical hole with 40°–60° countersink High‑precision finishing performance for consistent surfaces The NS9530 uncoated cermet grade delivers a sharp cutting edge tailored for fine finishing operations. Its geometry and edge preparation lead to low cutting forces, which reduces chatter and tool deflection and therefore improves dimensional stability on external and internal turns. For shops prioritising surface integrity, the insert supports continuous cuts and small depths of cut, resulting in a reliably high surface finish without resorting to additional passes. Design and mounting features that simplify tool selection The insert follows the ISO CCGT form and is compatible with standard external holders or boring bars; compatibility is governed by form, relief angle, tolerance class, fastening, size and thickness. The insert has a rhombic shape with an 80° included angle, a 0.4 mm nose radius and a 7° relief angle, and is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) for secure clamping. These measurable characteristics make holder matching straightforward and reduce setup time in production environments. Production advantages and economical operation Using an uncoated cermet finishing grade offers low friction at the cutting edge and excellent edge retention on steels, which translates into fewer interruptions for tool changes and a more economical machining cycle. The combination of sharp geometry and the NS9530 substrate provides consistent chip formation for finishing feeds, supporting higher process reliability and predictable part outcomes. The insert’s construction enables efficient batch finishing where uniformity and repeatability are required. Application guidance and material suitability This insert is optimised for turning steel in finishing applications; choose the NS9530 grade and the matching single‑sided chipbreaker for workpieces where a fine surface and low cutting forces are priorities. The system typically consists of the ISO insert, a matching external holder or boring bar, a support or clamp set and suitable fixing screws. For less experienced users, matching the relief angle, tolerance class and clamping method to the holder specification is decisive for achieving the expected results. For professional finishing of steel, request original Tungaloy inserts from Metav Werkzeuge for immediate availability and tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997907 SKU: 6997907-Tungaloy Manufacturer SKU: TUN6997907 Model series: ISO‑turning inserts Manufacturer: Tungaloy Material: carbide Data Nose radius: 0.4 mm Relief angle: 7° Thickness: 3.97 mm Size designation: 09 Included angle: 80° Manufacturer article number: 6997907 Special features Uncoated cermet grade NS9530 Single‑sided chipbreaker Rhombic insert shape Cylindrical hole with one‑sided countersink (40°–60°) Designed for finishing turning of steel Compatibility determined by form, relief, tolerance, fastening, size and thickness Optimised for continuous cuts and small depths of cut System components: ISO insert, external holder or boring bar, clamp/underlay and spare screws FAQ What machining tasks is this insert designed for? This insert is intended for finishing turning of steel; the NS9530 uncoated cermet grade and rhombic geometry make it suitable for external and internal finishing operations. Which holder types are compatible with the CCGT 09T304 NS9530 insert? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the insert is designed for standard external holders and boring bars that accept ISO CCGT‑style inserts. How does the NS9530 grade affect cutting behaviour? The NS9530 uncoated cermet provides a sharp edge and reduced cutting forces, promoting stable chip formation and superior surface finish in finishing cuts. What clamping feature does the insert have? The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) to ensure reliable clamping in compatible holders. Is the insert suitable for interrupted cuts or heavy roughing? This grade and geometry are optimised for continuous finishing cuts and small depths of cut; for heavy roughing or highly interrupted cuts, a different grade or geometry should be selected. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 09T304 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing and consistent chip control thanks to the combination of a sharp uncoated cermet grade and an ISO rhombic geometry; the low cutting forces deliver excellent surface quality while the compact corner radius and single-sided chipbreaker ensure predictable results in continuous turning. Order the insert directly via Metav Werkzeuge or contact our consultants for selection support. CCGT 09T304 NS9530 – ISO rhombic turning insert, 7° clearance (Tungaloy) The CCGT 09T304 NS9530 is an ISO rhombic turning insert designed for finishing operations on steel, offering a sharp cutting edge and stable chip control for continuous turning with small depths of cut. Uncoated cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces ISO rhombic CCGT09 with 7° clearance Single-sided chipbreaker; hole with countersink Achieve high-precision finishing with low cutting forces and superior surface quality The uncoated NS9530 cermet is formulated for finishing steel components where surface integrity matters. Its sharp edge geometry produces low cutting forces, which reduces tool-induced vibration and helps maintain tight dimensional tolerances. In practice, this results in a smoother surface finish and less need for secondary operations when machining continuous cuts and shallow depths of cut. For shops focusing on consistent part quality, the combination of a fine cermet grade and a small corner radius delivers measurable gains in finish and repeatability. Ensure reliable seating and compatibility with ISO holders for consistent clamping Compatibility with a toolholder depends on form, relief angle, tolerance class, clamping method, size and thickness. The rhombic insert features a 7° clearance angle and is supplied with a cylindrical hole plus a single-sided countersink (40°–60°), so correct matching to the clamping seat is essential. The ISO designation guarantees interchangeability with standard holders; however, checking the holder’s seat geometry and screw style ensures the insert is clamped securely and performs as intended. Proper seating minimises micro-movement, improving tool life and part consistency. Boost productivity with predictable chip control and application-focused geometry The insert’s single-sided chipbreaker and compact 0.4 mm corner radius are optimised for finishing passes, promoting controlled chip formation and stable cutting even at modest feed rates. A plate thickness of 3.97 mm contributes to rigidity in the cutting zone, while the rhombic form and 80° included angle provide accessibility for external and internal turning. Together these features reduce process variation and the likelihood of rework, delivering a more economical production flow for short-cycle or high-mix environments where surface quality and repeatability are priorities. For precision finishing with Tungaloy’s NS9530 cermet, contact Metav Werkzeuge for technical selection and current availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997913 SKU: 6997913-Tungaloy Manufacturer SKU: TUN6997913 Model series: ISO-Drehwendeschneidplatten ISO designation: CCGT09T304 Facts Corner radius: 0.4 mm Relief angle: 7° Plate thickness: 3.97 mm Insert size: 09 Included angle: 80° Countersink range: 40°–60° Special features Uncoated cermet grade NS9530 Rhombic insert shape Single-sided chipbreaker Cylindrical hole with one-sided countersink Finishing grade for steel Designed for external and internal turning FAQ What materials is this insert suitable for? The CCGT 09T304 NS9530 insert is a finishing grade formulated primarily for steel; the NS9530 uncoated cermet provides low cutting forces and excellent surface finish when turning steel components. How does the insert achieve better surface quality? The sharp edge geometry of the NS9530 cermet, combined with the 0.4 mm corner radius and single-sided chipbreaker, reduces cutting forces and vibration, which improves surface finish during continuous finishing passes. Which holders are compatible with this ISO insert? Compatibility is determined by holder form, relief angle, tolerance class, clamping method, size and thickness; the ISO designation CCGT09T304 ensures interchangeability with standard rhombic holders designed for 09-sized inserts. Is the insert supplied with a hole and countersink? Yes, the CCGT 09T304 NS9530 features a cylindrical hole with a single-sided countersink (40°–60°), enabling secure clamping and easy replacement using the correct ISO screw and seat. What is the manufacturer article number and SKU for reordering? The manufacturer article number is 6997913 and the SKU is 6997913-Tungaloy; the manufacturer SKU is TUN6997913. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of edge stability, long tool life and ISO compatibility to maintain a smooth production flow; the tough, coated grade is designed to perform under varying engagement conditions. Order the insert directly via Metav Werkzeuge or contact our consultants for application support. CCGT 09T304 SH7025 ISO rhombic turning insert, 80° geometry — Tungaloy The CCGT 09T304 SH7025 is an ISO-standard rhombic indexable insert for external and internal turning, engineered for stable cutting edges and reliable chip control. ISO rhombic insert, 80° geometry Coated cemented carbide SH7025 grade 0.4 mm nose radius for fine turning Cylindrical hole with single-sided countersink Consistent performance where engagement varies The SH7025 grade is a coated cemented carbide developed for tough applications that demand edge stability even when cutting conditions change. As a rhombic ISO insert with a primary 80° main angle, this turning tip balances strength and accessibility for shoulder cuts and general turning. The coated substrate helps reduce flank wear, extending usable life and lowering total tooling costs per component, which supports efficient batch production and reduces unplanned downtime. Fast integration into ISO tool systems for predictable changeovers This insert conforms to ISO dimensions and interfaces, so compatibility with holders is determined by shape, clearance, tolerance class, clamping and thickness. The design is intended for straightforward assembly into a standard tool system—insert, compatible outside holder or boring bar, underlay/shim and clamp set with spare screws—allowing quick indexed changes and minimal setup time. The 7° clearance preserves cutting geometry while the 3.97 mm plate thickness provides the rigidity required for repeatable, vibration-resistant machining. Improved chip control and surface quality for finishing and semi-finishing The single-sided chipbreaker channels chips reliably and supports consistent surface finish on interrupted or varying cuts. The small 0.4 mm nose radius facilitates fine finishing passes and delicate profile work while the 80° rhombic shape gives improved approach angles for shoulder and groove features. Clear chip evacuation reduces heat buildup at the cutting edge, which in turn contributes to longer tool life and steadier dimensions across series parts. Practical selection and handling to boost productivity Choose a chipbreaker and grade that match material, cutting mode and machine stability; the SH7025 grade suits operations where edge resilience is prioritised, particularly with smaller toolholders or variable engagement. Keep spare screws and a matched shim set on hand to reduce machine downtime during insert changes. Regular inspection of the cutting edge and adherence to recommended feeds and speeds will maximise the economic benefit of the insert while ensuring consistent component quality. The insert is supplied with a cylindrical hole featuring a single-sided countersink (40°–60°) for secure clamping. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy CCGT 09T304 SH7025 insert into production, or request compatibility guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6967372 Manufacturer SKU: TUN6967372 SKU: 6967372-Tungaloy Part designation: CCGT09T304 SH7025 Brand: Tungaloy Numbers / Facts Nose radius: 0.4 mm Clearance angle: 7° Plate thickness: 3.97 mm Insert size: 09 Main angle: 80° Special features / Versions Coated cemented carbide SH7025 Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker Application: Turning (external & internal) ISO standard turning insert series FAQ Is this insert suitable for finishing and light profiling? The CCGT09T304 SH7025 insert is intended for turning tasks where a small nose radius is required; the 0.4 mm radius supports finishing and fine profiling while the grade’s toughness preserves the cutting edge. Which toolholders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, clamping and plate thickness; the insert follows ISO rhombic dimensions so matching an ISO 09 holder for rhombic geometry will ensure correct fit. What are the chip control characteristics of this insert? The one-sided chipbreaker aids consistent chip flow and reduces heat generation at the edge, improving surface finish and contributing to predictable tool life under varying engagement. How should the insert be mounted and secured? Fit the insert with a matching underlay or shim and clamp set; use the cylindrical hole with the single-sided countersink to seat the screw and clamp securely, and keep spare screws to minimise machine downtime. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 SH7025 Wendeplatten - Tungaloy
High edge stability and controlled chip formation make the CCGT09T304 SH7025 a reliable choice for productive turning operations. The coated carbide SH7025 grade and a 0.4 mm corner radius support consistent tool life and repeatable surface quality. Order the insert directly via Metav Werkzeuge or ask our consultants for application-specific recommendations. CCGT 09T304 SH7025 Turning indexable insert by Tungaloy CCGT09T304 SH7025 is an ISO-standard indexable insert for general turning applications, designed for use with compatible 80° rhombic holders. Coated SH7025 grade for edge toughness One-sided chipbreaker for controlled chips Rhombic CCGT insert, 80° cutting geometry Cylindrical hole with single-side countersink High stability for consistent turning results The coated carbide composition of this indexable insert provides a balance between toughness and wear resistance, making it particularly suited to variable engagement conditions. The SH7025 grade is formulated for edge stability, which reduces the risk of chipping during interrupted cuts and enhances process reliability. When mounted in a suitably rigid holder, the insert maintains cutting performance over longer tool life, supporting predictable cycle times and fewer tool changes. Seamless integration with ISO holders and predictable geometry Compatibility is governed by form, 7° clearance, tolerance class, fastening, size and thickness; the CCGT09T304 conforms to the ISO turning insert system to ensure straightforward replacement. The 80° cutting angle and rhombic geometry permit a versatile range of external and internal turning tasks, while the 3.97 mm thickness gives mechanical stability in the pocket. The insert's cylindrical hole with a single-side countersink (40°–60°) enables secure clamping and simple alignment in standard clamping systems. Effective chip control and economical machining Equipped with a one-sided chipbreaker, the insert supports controlled chip formation for common turning operations, aiding chip evacuation and reducing rework. The combination of the SH7025 coating and the 0.4 mm corner radius delivers a compromise between finish quality and robustness; small radii improve surface finish, while the coating maintains flank resistance. This results in fewer stoppages for insert changes and a measurable improvement in machining economy for small-tool setups or changing engagement depths. For tailored application advice or to request a quote for the Tungaloy CCGT09T304 SH7025 indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with grade and chipbreaker selection Technical data Manufacturer article number: 6967412 SKU: 6967412-Tungaloy Manufacturer SKU: TUN6967412 Brand: Tungaloy Model series: ISO turning indexable inserts Core specifications ISO designation: CCGT09T304 Insert size: 09 Cutting angle: 80° Clearance angle: 7° Corner radius: 0.4 mm Plate thickness: 3.97 mm Design and features Material: carbide (coated) Coating/grade: SH7025 Chipbreaker: one-sided Hole: cylindrical with single-side countersink 40°–60° Shape: rhombic Application: turning System: ISO indexable insert; compatible with matching holder, clamp and screw FAQ What turning tasks is this insert best suited for? The CCGT09T304 SH7025 Tungaloy indexable insert is intended for general external and internal turning, performing well under variable engagement conditions and in smaller-tool applications where edge stability is essential. How is holder compatibility determined for this insert? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; the CCGT09T304 follows ISO standards, so matching ISO rhombic holders with the corresponding pocket and clamping set are required. What are the key geometric specifications to consider? Key values are the 0.4 mm corner radius, 7° clearance, 80° cutting geometry, insert size 09 and 3.97 mm plate thickness, which together determine the insert’s cutting behaviour and fit in the toolholder. Does the insert provide good chip control? Yes. The integrated one-sided chipbreaker supports controlled chip formation, improving evacuation and reducing the likelihood of chip-related interruptions in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 SH725 Wendeplatten - Tungaloy
Take advantage of the SH725 coated carbide grade, the ISO‑standard compatibility and the 80° rhombic geometry to ensure stable cutting and consistent surface quality in both external and internal turning. Order the insert directly via Metav Werkzeuge or request specification support from our consultants. CCGT 09T304 SH725 80° rhombic indexable insert for turning — Tungaloy The CCGT09T304 SH725 is an ISO‑standard indexable insert designed for external and internal turning, providing a tough, edge‑stable grade for varying engagement conditions. SH725 coated carbide grade for tough cutting 80° rhombic geometry for versatile turning 0.4 mm corner radius for fine edge detail Cylindrical hole with 40°–60° countersink Consistent tool life and cutting stability with a tough coated grade The SH725 coated carbide formulation provides a balance between toughness and wear resistance, designed specifically for turning applications where engagement conditions change frequently. Using a coated cemented carbide grade reduces flank and crater wear under interrupted cuts and varying depths of cut, which translates into longer tool life and fewer indexings. The combination of coating and substrate hardness enables productive machining with a focus on repeatable results rather than frequent tool changes, so process windows remain stable even when component geometries vary. Geometry tailored for precision and secure clamping The insert’s 80° rhombic geometry and 0.4 mm corner radius allow precise control over cutting edge contact and surface finish, making the insert suitable for both finishing and light roughing tasks. The single‑sided chipbreaker helps to direct chips predictably in typical turning feeds, improving swarf control and reducing the risk of edge damage. Compatibility with the holder depends on form, clearance angle, tolerance class, fastening, size and thickness; the insert’s cylindrical hole with single‑side countersink (40°–60°) ensures secure mounting and correct seat alignment when used with the appropriate clamping set and replacement screws. ISO‑based system approach for reliable workshop integration As part of an ISO turning insert series, this component fits into a system comprising an ISO insert, a compatible external holder or boring bar, shims/clamp sets and standard fixing screws. Choosing the correct chipbreaker and grade for the workpiece material and machining stability is essential: this insert is intended for turning and performs best when the grade and breaker match the alloy and cutting conditions. Clear labelling and standardised geometry facilitate tool inventory management and repeatable set‑ups, helping to reduce downtime and maintain a steady production flow. For high‑stability turning with Tungaloy’s SH725 grade, contact Metav Werkzeuge for expert advice and secure supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737008 Manufacturer SKU: TUN6737008 SKU: 6737008-Tungaloy Model series: ISO turning indexable inserts Grade: SH725 Material: Carbide Core specifications Insert designation: CCGT09T304 Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Insert angle: 80° Special features Rhombic insert shape Cylindrical hole with single‑side countersink (40°–60°) Single‑sided chipbreaker Coated carbide for tough cutting ISO‑compatible for external and internal turning FAQ What materials is the CCGT09T304 SH725 insert best suited for? The CCGT09T304 SH725 insert from Tungaloy is formulated as a tough coated carbide grade for general turning and is particularly effective where variable engagement and interrupted cuts occur; selection of chipbreaker and cutting data should match the specific workpiece material. How is the insert secured in the holder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) for secure mounting; correct clamping depends on matching the ISO form, clearance angle, tolerance class, fastening and thickness to the holder. Can the insert be used for both external and internal turning? Yes, the ISO‑standard geometry and rhombic form allow the insert to be applied to both external and internal turning operations when paired with the appropriate external holder or boring bar. What advantage does the 0.4 mm corner radius provide? A 0.4 mm corner radius delivers finer edge engagement and improved surface finish control, making it suitable for finishing passes and light profiling where dimensional accuracy matters. Is the CCGT09T304 supplied as part of a system? The insert is intended for use within an ISO turning insert system, comprising the insert itself, a matching external holder or boring bar, shims/clamp sets and standard replacement screws for reliable assembly and repeatable setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 09T304 SH725 Wendeplatten - Tungaloy
Take advantage of a tough, edge‑stable coated carbide grade and precise ISO rhombic geometry to improve process reliability and surface quality in turning operations; the combination of a 0.4 mm corner radius and a 7° relief angle provides controlled cutting behaviour and flexible use with a wide range of holders — order directly via Metav Werkzeuge or ask our consultants for holder compatibility. CCGT 09T304 SH725 indexable insert for turning — Tungaloy CCGT 09T304 SH725 is an ISO‑standard rhombic indexable insert designed for external and internal turning, combining a 0.4 mm corner radius with a 7° relief angle for stable performance in variable engagement conditions. ISO rhombic insert geometry SH725 coated carbide for edge stability 0.4 mm corner radius for fine finishing Central hole with countersink for secure clamping Reliable performance from a tough coated grade The SH725 coating variant is a coated carbide grade optimised for toughness and cutting‑edge stability, making it suitable where tool engagement can vary or where smaller tooling is used. The grade's composition supports consistent chip formation and extended edge life in interrupted cuts, which in turn reduces unplanned tool changes and contributes to higher overall productivity. By selecting a robust grade such as this, process planners gain a measurable advantage in machining repeatability and component quality. Geometry and clamping features that aid precision The insert's rhombic form (size 09) and 80° included angle deliver predictable approach geometry for turning tasks, while the 0.4 mm corner radius balances edge strength with the ability to produce fine surface finishes. The 7° relief angle reduces rubbing and heat generation at the flank, improving tool life in many turning applications. The plate is 3.97 mm thick, and the centre is prepared with a cylindrical hole plus single‑side countersink (40°–60°) to ensure secure, repeatable clamping in compatible holders. These geometric details are decisive when matching inserts to clamping systems and fixture tolerances. Practical selection guidance for machinists and engineers Compatibility depends on insert form, relief angle, tolerance class, clamping method, size and thickness; therefore, choose the matching external holder or boring bar, underplate/shim and fastening screws that correspond to the insert geometry. The included single‑sided chipbreaker is aimed at predictable chip control for many turning tasks; selecting an alternative chipbreaker and the SH725 grade according to workpiece material and machining stability will help to optimise cycle time and surface integrity. The insert is intended primarily for turning and integrates into standard ISO indexable insert systems for straightforward tool‑room planning. For reliable turning performance with the SH725 grade from Tungaloy, contact Metav Werkzeuge for precise holder compatibility and availability via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6737133 SKU: 6737133-Tungaloy Manufacturer SKU: TUN6737133 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Included approach angle: 80° Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Material: carbide Coating/grade: SH725 (coated carbide) Shape: rhombic (CCGT) Chipbreaker: single‑sided Application: turning (external and internal) Mounting: with central hole for secure clamping FAQ What materials is this insert best suited for? The CCGT 09T304 SH725 insert is intended for turning a broad range of materials where a tough, edge‑stable grade is required; the SH725 coated carbide performs particularly well in applications with variable engagement and interrupted cuts. How does the 0.4 mm corner radius affect surface finish and tool life? A 0.4 mm corner radius offers a compromise between increased edge strength and the ability to produce a fine surface finish; the radius helps to distribute cutting forces and extend edge life under standard turning conditions. Which holder features are required for secure clamping? Holders compatible with the ISO CCGT form, accepting size 09 plates with a central cylindrical hole and single‑side countersink, are required to ensure repeatable, secure clamping for the Tungaloy indexable insert. Is the chip control suitable for finishing passes? The single‑sided chipbreaker on this insert supports controlled chip formation and can be used for finishing where stable cutting conditions are present; pairing the insert grade with the correct feed and speed settings improves surface integrity. What identifies the product and where is it from? This item is the CCGT 09T304 SH725 indexable insert (SKU 6737133‑Tungaloy) manufactured by Tungaloy and designed for ISO turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 SH725 Wendeplatten - Tungaloy
Benefit from the combination of a resilient SH725 coating, ISO‑standard CCGT geometry and a fine 0.4 mm nose radius for stable, repeatable turning results; order the insert via Metav Werkzeuge or consult the specialists for matching holder options. CCGT CCGT09T304 SH725 turning insert (ISO rhombic) — Tungaloy A CCGT09T304 SH725 ISO rhombic turning insert designed for external and internal turning applications, offering a tough coated carbide grade for changing engagement conditions. ISO rhombic CCGT09T304 geometry for wide compatibility Coated carbide grade SH725 for edge stability 0.4 mm nose radius for precise surface finish Cylindrical hole + single‑side countersink mounting Reliable performance for diverse turning tasks The insert is built on an ISO rhombic platform that ensures broad compatibility with standard toolholders; this geometry facilitates straightforward indexability and predictable cutting behaviour. The coated carbide substrate provides a balance between toughness and wear resistance, making the component suitable for both external and internal turning. By choosing a defined nose radius of 0.4 mm, machining yields consistent surface finish and dimensional control while keeping cutting forces moderate. The design emphasis is on repeatability and process stability, which is essential for series production and mixed-batch work. Edge stability and suitability for variable engagement The SH725 grade is a purpose‑developed coating and substrate combination that enhances edge robustness under varying depths of cut and interrupted cuts. This makes the insert particularly useful when tool size is small or when engagement conditions change frequently—common scenarios in subcontract and precision turning shops. The single‑sided chipbreaker contributes to controlled chip formation and evacuation, reducing the risk of recutting and thermal peaks. In practical terms, the result is fewer scrap parts and longer intervals between index changes, supporting efficient cycle times. Mounting accuracy and mechanical fit for consistent results Mechanical mounting features are decisive for insert behaviour; this item is supplied with a hole and a cylindrical hole with a single‑side countersink (40°–60°) to match standard clamping arrangements. The plate thickness of 3.97 mm and the ISO size designation ensure correct seating and clamping force distribution when paired with compatible holders. The 7° clearance angle reduces flank rubbing while maintaining adequate support for the cutting edge. Correct selection of holder geometry in line with these parameters ensures repeatable positioning and reduces vibration, which in turn improves surface integrity. Materials, applications and practical guidance Constructed from carbide with a protective SH725 coating, the insert is optimised for turning a broad range of materials when used with appropriate cutting data. Typical applications include finishing and medium‑duty roughing passes in steel and alloyed materials where edge security is a priority. For operators less familiar with grade selection: the coated carbide layer increases thermal resistance and wear life, while the substrate maintains toughness—together reducing the likelihood of chipping during variable cuts. Selection of feeds, speeds and coolant strategy should follow machining recommendations for the chosen workpiece material to exploit the insert’s advantages fully. For reliable turning performance with Tungaloy’s SH725 grade, contact Metav Werkzeuge for tailored holder compatibility and delivery assistance. Technical data Article number: 6784490 SKU: 6784490-Tungaloy Manufacturer SKU: TUN6784490 Model series: ISO‑turning indexable inserts Facts Angle: 80° Clearance angle: 7° Nose radius: 0.4 mm Plate thickness: 3.97 mm Size: 09 Special features Coating: SH725 Material: carbide Plate form: rhombic Mounting: with hole; cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Application: turning Compatibility note: compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suited for? The CCGT09T304 SH725 Tungaloy turning insert is designed for a wide range of metals; its coated carbide construction favours steel and alloyed materials where edge stability is essential. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius on the insert delivers improved surface quality and dimensional control during finishing cuts while keeping cutting forces at manageable levels. Is the insert compatible with standard ISO holders? Yes — the ISO rhombic geometry and the specified hole/countersink configuration make the insert compatible with holders that accept CCGT‑form plates, provided the clamping and tolerance class match. What advantages does the SH725 coating provide? The SH725 coating enhances edge toughness and wear resistance, offering greater stability in applications with variable engagement or smaller tool sizes. Can the insert be used for internal turning? The insert is suitable for both external and internal turning when mounted in an appropriately sized and supported toolholder. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 09T304 SH730 Wendeplatten - Tungaloy
Benefit from the combination of a tough SH730 coating, a precise 0.4 mm corner radius and ISO compatibility for stable, repeatable turning operations; order the CCGT09T304 insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT CCGT09T304 SH730 — ISO rhombic turning insert for external and internal turning (Tungaloy) CCGT09T304 SH730 is a precision rhombic indexable insert designed for general turning applications, offering robust edge stability for small tools and variable engagement conditions SH730 coated carbide for stable cutting 0.4 mm corner radius for consistent profiles ISO rhombic form CCGT09T304 with 7° clearance Countersunk locating hole, 3.97 mm thickness Enhanced edge stability for consistent productivity The coated carbide grade SH730 is formulated to deliver edge stability and reliable tool life, especially when using smaller toolholders or when cut engagement varies. The insert balances toughness and wear resistance, reducing the risk of chipping under interrupted cuts. By choosing a grade that emphasises durability, shops achieve fewer index changes and smoother production runs, supporting higher machine uptime and predictable cycle times. Geometry and clamping for repeatable accuracy The ISO rhombic geometry with an 80° cutting angle, 7° clearance and 0.4 mm corner radius provides a stable cutting edge and predictable profile control. The insert’s countersunk locating hole (cylindrical hole plus single-sided countersink at 40°–60°) ensures positive seating and repeatable positioning in standard ISO holders. With a plate thickness of 3.97 mm, the geometry supports secure clamping and consistent cutting plane alignment, which simplifies setup and reduces vibration-related quality issues. Practical use and process flexibility in turning Designed primarily for turning, the indexable insert is intended for both external and internal operations where selection of an appropriate chipbreaker and grade matters. The one-sided chipbreaker helps with chip control in a wide range of cutting conditions; pairing the insert with the correct holder and cutting data will aid surface finish and dimensional repeatability. For tailored cutting parameters or compatibility checks, Metav Werkzeuge provides application guidance and cutting data to match the workpiece and machining strategy. For Tungaloy-grade reliability and application advice, contact Metav Werkzeuge to source the CCGT09T304 SH730 insert and request compatibility or cutting-parameter support via info@metav-werkzeuge.com or phone +49 2822 7131930. Technical data Article number: 6854004 Manufacturer SKU: TUN6854004 SKU: 6854004-Tungaloy Model series: ISO turning indexable inserts Designation: CCGT09T304 Grade/coating: SH730 Material: carbide Core specifications Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Cutting angle: 80° Features and applications Rhombic insert geometry (CCGT) Countersunk locating hole (cylindrical hole + single-sided countersink 40°–60°) One-sided chipbreaker Compatible with ISO holders for external and internal turning Suitable for variable engagement and small tools Coated grade engineered for edge stability FAQ What work is this insert intended for? The CCGT09T304 SH730 is intended for general turning—external and internal—where a robust, coated carbide grade is required for stable cutting. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO rhombic form standards and the locating hole and dimensions allow compatibility with standard ISO turning holders when matched for size and clamping style. Which materials is the SH730 grade best for? SH730 is a tough, edge-stable coated carbide grade designed to perform well under variable engagement and in circumstances where edge robustness is critical; select the chipbreaker and cutting data according to the specific workpiece material. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius provides a balance between profile strength and finish; it improves edge life compared with sharper radii while maintaining good dimensional control for turned profiles. What does the countersunk locating hole provide? The countersunk locating hole (cylindrical hole plus single-sided countersink 40°–60°) ensures reliable seating and repeatable positioning within the clamping system, reducing index and setup variability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO compatibility, the sharp TH10 uncoated carbide grade and the stable single‑sided chipbreaker to achieve low cutting forces and consistent surface finishes in turning operations; order the insert directly via Metav Werkzeuge or contact the consultants for application support. CCGT 09T304 TH10 Drehen — Tungaloy ISO turning indexable insert, uncoated carbide CCGT09T304 TH10 is an ISO‑standard, rhombic turning insert designed for external and internal turning of non‑ferrous materials and other applications where a sharp, uncoated edge supports low cutting forces and clean surfaces ISO‑standard rhombic insert CCGT 09 TH10 uncoated carbide for clean surfaces 7° clearance and 80° included angle Single‑sided chipbreaker, 0.4 mm corner radius Consistent finishes and reduced cutting forces for non‑ferrous work The use of the TH10 uncoated carbide grade provides a sharp cutting edge that is optimised for materials such as aluminium and other non‑ferrous alloys; this results in reduced cutting forces and improved surface quality. Because the grade is uncoated, the cutting edge can deliver low friction and precise shearing, which is particularly beneficial where small contact forces and a tidy finish are priorities. In production, this characteristic can translate into fewer burrs and less downstream rework, improving overall process efficiency. Secure clamping and straightforward compatibility with ISO holders Designed to the ISO plate series, the insert’s fit is determined by form, 7° clearance, tolerance class, fixing, size and thickness. The rhombic shape and the cylindrical hole with single‑side countersink (40°–60°) ensure repeatable seating and stable clamping in compatible external holders or boring bars. The plate’s 3.97 mm thickness and standard 09 size simplify selection and replacement across common toolholders, reducing machine downtime and supporting consistent repeatability in batch production. Predictable chip control and efficient turning strategies The single‑sided chipbreaker combined with a 0.4 mm corner radius supports controlled chip formation when paired with the correct cutting parameters and workpiece stability. For external and internal turning, selecting the appropriate chipbreaker geometry and matching the uncoated grade to the workpiece material will result in stable machining, consistent surface integrity and economical tool use. This insert is suited to applications where process reliability and straightforward edge behaviour are required rather than extreme wear resistance. Contact Metav Werkzeuge for application guidance on the Tungaloy CCGT09T304 TH10 insert and request tailored cutting data via info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical Data Article number: 6801339 Manufacturer SKU: TUN6801339 SKU: 6801339-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Thickness: 3.97 mm Size designation: 09 Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Special features Material: cemented carbide Grade: TH10 (uncoated) Plate form: rhombic Hole: with hole; cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: single‑sided Typical application: turning (external and internal) FAQ What materials is this insert optimised for? The CCGT09T304 TH10 insert is optimised for non‑ferrous materials and applications where an uncoated, sharp edge supports low cutting forces and clean surface finishes. How is the insert fixed in the toolholder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) for secure mounting; compatibility with a holder depends on form, clearance angle, tolerance and plate thickness. Which features improve chip control? The single‑sided chipbreaker together with the 0.4 mm corner radius provides controlled chip formation suitable for stable turning operations. Can this insert be used for internal turning? Yes; the ISO rhombic geometry and the TH10 grade make the insert suitable for both external and internal turning where material and stability match the grade. What distinguishes the TH10 grade from coated grades? TH10 is an uncoated, sharp universal grade designed to reduce cutting forces and enhance surface quality rather than to provide additional wear resistance offered by coatings. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of standardised ISO compatibility, a sharp uncoated carbide grade for low cutting forces, and a compact 0.4 mm corner radius to maintain a steady production flow. Order the insert directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. CCGT09T304 TH10 CCGT — Turning indexable insert, uncoated carbide, 0.4 mm radius — Tungaloy The CCGT09T304 TH10 is an ISO rhombic indexable insert designed for precision external and internal turning, optimised for non‑ferrous materials and operations requiring low cutting forces and clean surface finishes ISO rhombic turning insert 09 size Uncoated carbide grade TH10 Sharp universal edge for low cutting forces Central hole with countersink for secure clamping Improved productivity through low cutting forces and consistent finishes The uncoated carbide composition and the TH10 grade deliver a deliberately sharp cutting edge that reduces cutting resistance, which in turn lowers power draw and heat generation during machining. This results in more stable cuts when machining aluminium alloys and other non‑ferrous materials, producing a clean surface with fewer secondary operations required. As an ISO‑conforming insert, it enables quick replacement and repeatability across toolholders, supporting predictable cycle times and reduced downtime. Secure clamping and compatibility with ISO toolholder systems Engineered as a standard ISO insert, the plate form and hole geometry guarantee positive seating in compatible holders. The central hole with a cylindrical bore and a single‑sided countersink (40°–60°) ensures reliable fixation with standard screws and clamps, reducing the risk of micro‑movement under load. The combination of the rhombic shape and a clearance angle of 7° supports flexible approach angles for both external and internal turning, allowing straightforward integration into existing fixtures and turning bars. Application range and edge behaviour for non‑ferrous machining With a corner radius of 0.4 mm, this insert balances edge strength and form accuracy, making it suitable for finishing and semi‑finishing passes where dimension and surface quality matter. The one‑sided chipbreaker and the uncoated edge promote predictable chip formation on soft alloys, limiting smearing and built‑up edge. For workshops seeking a universal solution for aluminium and similar materials, the insert provides a cost‑efficient option without an additional coating layer, facilitating lower cutting forces and improved tactile surface quality. For ordering or technical advice on Tungaloy TH10 turning inserts, contact Metav Werkzeuge for tailored recommendations and procurement: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 6801346 Manufacturer SKU: TUN6801346 SKU: 6801346-Tungaloy Model series: ISO turning indexable inserts Type designation: CCGT09T304 Facts Material: carbide Coating: uncoated Radius: 0.4 mm Thickness: 3.97 mm Clearance angle: 7° Included angle: 80° Size: 09 Special features Rhombic plate form Central hole with cylindrical bore and single‑sided countersink (40°–60°) One‑sided chipbreaker Sharp universal grade TH10 for non‑ferrous materials Application: external and internal turning FAQ What materials is this insert best suited for? The CCGT09T304 TH10 insert from Tungaloy is optimised for non‑ferrous materials such as aluminium alloys and other soft metals, where a sharp, uncoated edge supports low cutting forces and clean finishes. Is the insert compatible with standard ISO toolholders? Yes. The insert follows ISO dimensions and its rhombic form, hole position and tolerance class make it compatible with matching ISO‑type turning holders and boring bars. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius offers a balance between edge strength and fine surface generation; it is suitable for finishing and semi‑finishing passes where dimensional accuracy and surface quality are priorities. What type of chip control can be expected? The one‑sided chipbreaker is designed to promote predictable chip formation when turning non‑ferrous materials, helping to avoid smearing and maintaining a stable cutting process. Which grade and edge condition does the insert have? The insert is supplied in the uncoated TH10 grade, offering a sharp universal edge for operations that benefit from low cutting forces and minimal built‑up edge. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 09T304 TH10 Wendeplatten - Tungaloy
Benefit from the combination of ISO interchangeability, a sharp uncoated TH10 carbide cutting edge and precise geometry — the result is low cutting forces, clean surface finishes and repeatable clamping in turning operations. Order the CCGT09T304 TH10 insert through Metav Werkzeuge or consult their technical team for tailored application advice. CCGT09T304 TH10 Tungaloy indexable turning insert A CCGT09T304 TH10 indexable turning insert engineered for external and internal turning, offering a rhombic form with a small corner radius for fine finishing and stable chip control. ISO‑standard rhombic insert 09 size Uncoated TH10 carbide for clean surfaces 0.4 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Predictable fit and secure clamping for productive turning The ISO‑standard geometry guarantees interchangeability with compatible holders: form, 7° relief, tolerance class, fastening and thickness determine compatibility. This predictability reduces setup time and minimises indexing errors during tool changes. The rhombic shape ensures access to both external and internal contours while the central hole with a one‑sided countersink provides secure seating and repeatable axial positioning. As a result, machining cycles are more stable and tool changeovers faster. Low cutting forces and improved finishes on non‑ferrous work The uncoated carbide grade TH10 is a sharp universal grade optimised for non‑ferrous materials and light cutting conditions where a clean cutting edge is required. The uncoated cutting edge reduces adhesion and built‑up edge when machining softer alloys, which leads to clean surfaces and extended edge life in these applications. The single‑sided chipbreaker supports controlled chip formation under moderate feeds, translating into fewer interruptions and more consistent surface quality. Geometry that balances edge strength and precision A small 0.4 mm radius at the corner gives a fine finish while maintaining sufficient edge strength for light to medium cuts. The plate thickness of 3.97 mm and size 09 contribute to rigidity when clamped, reducing vibration and improving dimensional repeatability. The insert’s included angle of 80° and clearance geometry are chosen to balance cutting forces and tool accessibility, making the insert suitable for finishing and semi‑finishing tasks. The uncoated TH10 specification simplifies sharpening and inspection in-house if required. Contact Metav Werkzeuge for application consultation and to request availability of the Tungaloy CCGT09T304 TH10 indexable insert for turning operations Technical data Article number: 6801344 Manufacturer SKU: TUN6801344 SKU: 6801344-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: CCGT09T304 TH10 Facts Corner radius: 0.4 mm Included angle: 80° Relief angle: 7° Thickness: 3.97 mm Size: 09 Special features Material: carbide Grade: TH10 (uncoated) Plate form: rhombic Hole: cylindrical hole with one‑sided countersink (40°–60°) Chipbreaker: single‑sided Application: turning (external and internal) ISO‑standard insert for predictable interchangeability FAQ What materials is this insert best suited for? The CCGT09T304 TH10 insert is specified for non‑ferrous materials and applications where an uncoated TH10 edge supports low cutting forces and clean finishes. How does the 0.4 mm radius affect machining? A 0.4 mm corner radius provides a finer surface finish while keeping adequate edge strength for finishing and light semi‑finishing operations with the CCGT09T304 TH10 insert. Is the insert compatible with all ISO holders? Compatibility depends on holder form, 7° relief, tolerance class, fastening method, size and thickness; the ISO‑standard geometry simplifies matching but holder verification is recommended. What does the cylindrical hole with countersink provide? The cylindrical hole with a one‑sided countersink (40°–60°) ensures secure seating and repeatable axial positioning, improving clamping stability for consistent machining. Can the uncoated TH10 grade be resharpened? Yes, the uncoated carbide edge can be resharpened or reconditioned according to in‑house tool maintenance practices to extend usable life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 09T308 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet GT9530 performance, precise ISO compatibility and a 0.8 mm nose radius for consistent finishing results; order the inserts conveniently via Metav Werkzeuge or consult the team for application advice. CCGT 09T308 GT9530 CCGT — Turning insert (ISO), coated cermet, hole — Tungaloy CCGT09T308 GT9530 is an ISO rhombic turning insert designed for external and internal turning, delivering fine surface quality and extended life in stable steel machining conditions. Coated cermet GT9530 for finishing 0.8 mm nose radius for fine detail ISO rhombic form, 80° for versatility 7° clearance angle for secure cutting Cylindrical hole with countersink for clamping Higher productivity through a wear-resistant grade The combination of a coated cermet composition and the GT9530 grade targets finishing applications on steel, where surface quality and tool life matter. The coating increases resistance to abrasive wear while the substrate maintains edge strength, resulting in longer tool life and fewer interruptions for insert changes. This balance supports consistent cycle times and a reduced cost per part in production environments that favour stable set-ups. Secure clamping and straightforward holder compatibility Designed to the ISO turning insert standard, the rhombic, 80° geometry and the cylindrical hole with one-sided countersink (40°–60°) ensure repeatable seating and positive clamp engagement. The combination of 7° clearance and the insert’s thickness provides stable support in a matching holder. When the correct holder form, relief angle and tolerance class are used, the system delivers stable chip control and lower vibration for improved dimensional consistency. Practical application advice for reliable finishing This insert is intended primarily for external and internal turning where a smooth finish is required; choose the single-sided chipbreaker and grade combination that matches material and rigidity. In less rigid conditions or for roughing, select a more robust geometry; for finish passes, the 0.8 mm nose radius helps achieve finer edge detail and better surface integrity. The coated cermet excels in steady cutting situations and is particularly suitable when a premium surface and extended intervals between index changes are desired. Ordering, spare parts and integration into the tool system The insert forms part of a standard ISO insert system and requires a corresponding external holder, underlay/clamping set and replacement screws to complete the assembly. For procurement and stock keeping, note the manufacturer article details and SKU to ensure correct replacement items are selected. Technical data sheets and compatibility lists are available to confirm holder fitment, chipbreaker matching and recommended cutting strategies for specific steel grades. For finishing-focused turning tasks, request the GT9530 inserts from Metav Werkzeuge for tailored recommendations and local delivery — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997866 Manufacturer SKU: TUN6997866 Manufacturer article number: 6997866 Designation: CCGT09T308 Grade: GT9530 Cutting material: coated cermet Material: cemented carbide Core specifications Size: 09 Insert shape: rhombic, 80° Thickness: 3.97 mm Nose radius: 0.8 mm Clearance angle: 7° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Features and applications Application: turning (external and internal) Chipbreaker: single-sided Compatibility: ISO turning insert system System components: insert, holder, underlay/clamping set, replacement screws FAQ What materials is this insert best suited for? This insert, the CCGT09T308 GT9530 from Tungaloy, is optimised for steel machining where a wear-resistant coated cermet delivers superior surface finish and extended life. Which holder features are required for correct clamping? A holder matching the ISO rhombic form, appropriate relief angle and correct tolerance class is required; the cylindrical hole with countersink ensures stable seat and clamp engagement. Is the 0.8 mm radius suitable for finishing operations? Yes— the 0.8 mm nose radius provides finer edge detail for finishing passes while the GT9530 grade preserves edge integrity during steady cutting. How does the single-sided chipbreaker influence performance? The single-sided chipbreaker is tuned for chip control during finishing; when combined with the coated cermet, it supports consistent chips and improved surface quality. What components complete the turning system for this insert? The system comprises the ISO insert, a compatible external holder or boring bar, an underlay/clamping set and the required replacement screws to secure the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T308 KS05F Wendeplatten - Tungaloy
Take advantage of the wear resistance of the KS05F grade combined with the robust 0.8 mm corner radius and ISO 80° rhombic geometry for dependable turning performance; order the CCGT09T308 KS05F Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT09T308 KS05F CCGT ISO 09T308 turning insert, rhombic 80° by Tungaloy The CCGT09T308 KS05F is an ISO-standard rhombic turning insert intended for external and internal turning applications, featuring a single-sided chipbreaker and a cylindrical hole with one-sided countersink for secure clamping. ISO rhombic insert CCGT 80° geometry Tungaloy KS05F grade for wear resistance 0.8 mm corner radius for robust edge Cylindrical hole with single-sided countersink Consistent cutting performance for productive turning The insert delivers repeatable edge stability thanks to its KS05F carbide grade and geometry optimised for turning. The cemented carbide substrate provides a balance of wear resistance and toughness, which means fewer interruptions for insert changes and a more predictable tool life. For shops aiming for steady cycle times, this translates into measurable process reliability and reduced tooling overhead. Compatibility and simple integration with ISO holders Designed as an ISO-standard plate, the insert integrates into common turning systems where compatibility is defined by form, clearance angle, tolerance class, clamping method, size and thickness. The rhombic 80° form and the cylindrical hole with one-sided countersink (40°–60°) ensure secure seating in matching holders; correct seat selection and torque on the clamping screw complete the mechanical assembly. This clarity reduces setup time and lowers the risk of incorrect mounting. Edge geometry and chip control for better finishes The 0.8 mm corner radius and the single-sided chipbreaker combine to produce stable cutting edges that tolerate moderate interruptions and variations in cut depth. This geometry supports good surface quality in external and internal turning while the chipbreaker guides chip formation to avoid entanglement and improve evacuation. Where finish and process stability matter, choosing this insert and matching the grade to the workpiece material will yield consistent results. Practical handling, application guidance and material range The plate thickness of 3.97 mm and the size designation 09 make the insert suitable for a wide range of standard holder types; selection of the chipbreaker and grade should follow the workpiece material and the machining conditions. The carbide composition and the KS05F formulation are tailored for turning tasks requiring a compromise between wear resistance and edge robustness. Compatibility checks with holder geometry (seat and clearance) are recommended before first use to ensure optimal performance. For precision turning where edge stability and reliable wear behaviour are essential, request the Tungaloy CCGT09T308 KS05F insert from Metav Werkzeuge or consult our specialists at Metav Werkzeuge for application-specific recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6822276 SKU: 6822276-Tungaloy Manufacturer SKU: TUN6822276 Model series: ISO turning indexable plates Label: CCGT09T308 KS05F Tungaloy-wendeplatte Facts Geometry angle: 80° Corner radius: 0.8 mm Thickness: 3.97 mm Plate size: 09 Clearance angle: 7° Countersink angle range: 40°–60° Special features Material: cemented carbide Grade: KS05F (Tungaloy) Chipbreaker: single-sided Hole: cylindrical hole with one-sided countersink Form: rhombic Application: Turning Compatibility: determined by holder form, clearance angle, tolerance class, clamping, size and thickness FAQ Which holder types are compatible with this insert? Compatibility requires a matching seat for the rhombic form and the correct clamping arrangement; the CCGT09T308 KS05F insert fits holders designed for ISO CCGT plates with an 80° geometry and a cylindrical hole with countersink. What materials is the KS05F grade suitable for? The KS05F grade is a Tungaloy carbide formulation designed for turning applications where a balance of wear resistance and toughness is required; it is suitable for a broad range of steels and general turning tasks. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius provides increased edge strength for interrupted cuts and improves tool life, while still allowing acceptable surface finish for many finishing and semi-finishing operations. Is the insert reversible or indexable? This is an indexable insert intended for indexing once the cutting edge is worn; the rhombic shape supplies multiple cutting edges depending on the specific insert geometry and mounting. What should be checked before first use in a holder? Verify the holder seat form, clearance angle (7°), tolerance class, clamping components and the plate thickness (3.97 mm) to ensure secure seating and correct clamping of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com