CCGT 09T302 GT9530 Wendeplatten - Tungaloy
The combination of a coated cermet grade (GT9530) and the CCGT09T302 rhombic geometry delivers a wear‑resistant finishing performance with reliable surface quality for stable turning operations; compatibility with ISO holders is ensured by the standardised form, clearance and thickness. Order the CCGT 09T302 GT9530 indexable insert via Metav Werkzeuge or contact our consultants for application advice CCGT 09T302 GT9530 — ISO rhombic turning insert by Tungaloy, coated cermet for finishing CCGT 09T302 GT9530 is an ISO‑standard rhombic indexable insert designed for external and internal turning, providing enhanced surface finish and extended tool life under stable cutting conditions ISO rhombic CCGT09T302, 7° clearance Coated cermet GT9530 for durable finishing Cylindrical hole with single‑side countersink High‑performance finishing grade that extends uptime The GT9530 coating combined with a coated cermet substrate targets finishing to light general‑purpose turning of steel, offering a balance between wear resistance and surface integrity. As a finishing grade, this insert reduces the need for secondary passes in stable setups, contributing to shorter cycle times and fewer tool changes. The alloyed coating resists abrasive wear while maintaining edge stability, which translates into consistent component finish and predictable service intervals, making production planning more reliable. Geometry and compatibility designed for dependable clamping The ISO rhombic shape with a 7° clearance and a 0.2 mm corner radius delivers the small but critical geometry for fine surface generation and controlled cutting edge engagement. Compatibility with toolholders depends on form, clearance angle, tolerance class, securing method, size and thickness; the standardised dimensions of this insert ensure straightforward interchangeability with most ISO‑specification external holders or boring bars. The cylindrical hole with a single‑side countersink (40°–60°) enables secure fastening and repeatable seating for accurate indexing. Practical benefits in workshop use and process reliability Selecting this indexable insert provides clear operational advantages: improved surface finish from the cermet grade and longer life under steady cutting conditions. The hardened coating stabilises the edge against abrasive wear, while the moderate corner radius helps to maintain part geometry and reduce vibration sensitivity in rigid setups. For jobs where surface quality and productivity are priorities, the insert supports cost‑effective machining by lowering scrap risk and reducing downtime for tool changeovers. Guidance on application and tool selection This insert is suitable where finishing or light‑duty general turning of steel is required under stable conditions. For best results, pair the insert with a matching ISO external holder or boring bar that accommodates the 09 size and 3.97 mm thickness; ensure the clamping system matches the insert’s seat and countersink. When machining less rigid setups or interrupted cuts, consider a more robust grade or a different geometry to avoid premature edge chipping. Regular inspection of the insert seat and screw torque helps maintain repeatable positioning and process stability. For machining tasks that demand consistent finish and predictable tool life, contact Metav Werkzeuge for ordering and technical consultation — Metav Werkzeuge can advise on holder compatibility and process parameters Technical Data Article number: 6997864 Manufacturer SKU: TUN6997864 Our SKU: 6997864-Tungaloy Model series: ISO‑Drehwendeschneidplatten Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° ISO designation: 09T302 Insert size: 09 Included angle: 80° Coating/grade: GT9530 Substrate: coated cermet Shape: rhombic Hole: cylindrical hole with single‑side countersink (40°–60°) Chipbreaker: single‑sided Application: turning (external and internal) Compatibility: ISO‑standard holders (form, clearance, tolerance, fastening, size, thickness) FAQ What materials is this insert intended for? This insert is specified for turning steel in finishing to light general‑purpose operations; the GT9530 grade is optimised for wear resistance and surface quality when machining steel. How does the GT9530 coating affect performance? The GT9530 coating on the cermet substrate increases wear resistance and stabilises the cutting edge, resulting in longer tool life and improved surface finish for stable turning operations. What seat and clamping features are required for the insert? The insert requires an ISO‑compatible seat and a fastening system that fits a cylindrical hole with a single‑side countersink (40°–60°) to ensure secure, repeatable clamping of the CCGT09T302 geometry. Can this insert be used for roughing operations? CCGT09T302 GT9530 is intended primarily for finishing and light general‑purpose turning; for heavy roughing or unstable setups a tougher grade or different geometry is recommended. Which holders are compatible with this 09‑size insert? Any ISO‑specified external holder or boring bar designed for 09 rhombic inserts with 3.97 mm thickness and 7° clearance will be compatible, provided the tolerance class and fastening match the insert’s hole and seat. How does the 0.2 mm corner radius influence the machining result? A 0.2 mm corner radius helps produce a fine surface finish while maintaining a defined edge; it is suited to finishing passes where precise geometry and low cutting forces are required. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 09T302 J740 Wendeplatten - Tungaloy
Benefit from the combination of wear resistance from the J740 grade and precise geometry for consistent turning results; order directly via Metav Werkzeuge or consult our advisers for application-specific selection. CCGT 09T302 J740 – ISO rhombic turning insert (80°) by Tungaloy CCGT 09T302 J740 is an indexable turning insert developed for general external and internal turning, offering stable chip control and dependable cutting-edge performance. Wear-resistant J740 grade Rhombic insert with 80° cutting angle Cylindrical hole with 40°–60° countersink 0.2 mm nose radius for fine turning Stable machining through a wear-resistant grade The combination of the J740 cutting grade and a carbide substrate delivers high wear resistance and good edge stability for turning tasks. This behaviour reduces unexpected tool changes and supports steady productivity in repetitive operations. The J740 formulation balances hardness and toughness to resist flank wear while maintaining reliable cutting-edge integrity, which is particularly valuable in medium-duty turning where consistent component tolerance is required. Geometry designed for consistent surface quality The ISO rhombic shape with an 80° main cutting angle and a 0.2 mm nose radius produces a precise contact geometry that minimises vibration and improves finish on the workpiece. A small radius is suited to fine turning and detail work, limiting deflection and enabling closer tolerances. The insert thickness of 3.97 mm and the specified clearance angle of 7° ensure a stable seat in compatible holders, helping to maintain the intended cutting geometry throughout the tool life. Secure clamping and clear mounting standards Compatibility with the toolholder is governed by defined ISO parameters: form, free angle, tolerance class, fastening, size and thickness. The insert features a cylindrical hole with a single-sided countersink (40°–60°) for positive location and reliable clamp engagement. These characteristics simplify mounting checks and reduce the risk of misalignment during index changes. Using holders and clamping kits that match these ISO criteria provides predictable repeatability and safer operation in production environments. Practical selection and process advice Select the matching chipbreaker and the J740 grade based on material, machining type and machine stability; the chipbreaker choice controls chip form and evacuation, directly affecting cycle times and surface finish. For general-purpose turning of steels and common alloys the J740 grade offers a pragmatic balance between tool life and edge robustness. For specialist materials or highly interrupted cuts, consider a dedicated grade or geometry and consult technical advisors to align coolant, speeds and feeds with the insert’s capabilities. For application advice or to source the Tungaloy turning insert, contact Metav Werkzeuge for tailored recommendations and fast supply. Technical data Manufacturer article number: 6801325 SKU: 6801325-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CCGT09T302 J740 Material: Carbide (Hartmetall) Facts Size: 09 Thickness: 3.97 mm Nose radius: 0.2 mm Cutting angle: 80° Clearance angle: 7° Special features Grade: J740 (Tungaloy) Chipbreaker: one-sided Hole: cylindrical hole + single-sided countersink (40°–60°) Shape: rhombic Application: Turning (external and internal) FAQ What materials is this insert suitable for? The CCGT 09T302 J740 insert is designed as a general-purpose turning grade; the J740 carbide mix performs well on a broad range of steels and typical alloys when combined with the appropriate chipbreaker and cutting data. How does the hole and countersink affect mounting? The cylindrical hole with a single-sided countersink (40°–60°) ensures positive seating and repeatable clamping in ISO-compatible holders, improving stability during index changes for the CCGT09T302 J740 insert. Which chipbreaker should be chosen for finishing cuts? For finishing operations, pair the J740 grade with a fine-profile chipbreaker to produce short, manageable chips and a refined surface finish while keeping cutting forces moderate. Can this insert be used for internal turning? Yes, the rhombic geometry and specified clearance angle make the insert suitable for both external and internal turning applications when mounted in a compatible holder. What effect does the 0.2 mm nose radius have on tolerances? A 0.2 mm nose radius supports tighter corner geometry and reduces form deviation in fine turning; it is recommended where close dimensional control and a smooth surface are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 J740 Wendeplatten - Tungaloy
The combination of consistent edge stability and wear-resistant carbide grade J740 ensures predictable cycle times and longer tool life in turning operations; choose matching holders and clamping kits for reliable performance. Order the insert via Metav Werkzeuge or consult our specialists for holder compatibility. CCGT 09T302 J740 CCGT 80° rhombic ISO turning insert by Tungaloy A CCGT09T302 J740 Tungaloy indexable insert intended for external and internal turning, offering a rhombic 80° geometry and a single-sided chipbreaker for controlled chip formation ISO rhombic insert, 80° cutting edge J740 Tungaloy carbide grade, high wear resistance Single-sided chipbreaker for stable cutting Cylindrical hole with 40°–60° countersink Consistent cutting performance for general turning The insert is engineered for stable machining cycles in a broad range of turning tasks. As an ISO-standard rhombic insert with an 80° cutting edge, it delivers a predictable approach angle that supports robust engagement during both external and internal turning. The J740 grade is a Tungaloy carbide formulation optimised for a balance of wear resistance and toughness, which translates into extended life under intermittent loading. The single-sided chipbreaker supports manageable chip flow, reducing downtime for manual chip clearing and helping to protect the toolholder and workpiece from erratic cutting forces. Mounting, geometry and compatibility explained for correct assembly Compatibility with the selected toolholder depends on several geometric parameters: insert form, 7° relief angle, tolerance class, attachment type, size and 3.97 mm thickness. The rhombic shape and the 0.2 mm corner radius favour fine finishing and close-tolerance turning where small radius details are required. The insert is supplied with a cylindrical hole with a single-sided countersink (40°–60°), enabling secure clamping in holders designed for ISO rhombic plates. When selecting an insert seat and clamp, ensure the holder matches the plate size 09 and thickness to maintain correct seat contact and repeatability. Material grade and machining advantages for reliable productivity The carbide base material combined with the Tungaloy J740 coating/grade provides improved resistance to flank and crater wear while maintaining edge stability under variable cutting conditions. For component production where repeatability and surface finish matter, this combination reduces the frequency of insert changes and supports longer uninterrupted cutting times. The single-sided chipbreaker design encourages a stable chip geometry suitable for a wide range of steels and alloyed materials, helping to maintain lower cutting forces and consistent surface quality; this simplifies process planning and supports higher overall productivity. For machining applications that demand reliable edge life and stable chip control, contact Metav Werkzeuge for matching holders and fast availability of the Tungaloy CCGT09T302 J740 insert — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations. Technical data Article number: 6801321 Manufacturer SKU: TUN6801321 SKU: 6801321-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Plate size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Cutting edge angle: 80° Special features Rhombic plate form Cylindrical hole + single-sided countersink (40°–60°) Single-sided chipbreaker Carbide material, Tungaloy J740 grade ISO designation: CCGT09T302 Application: turning FAQ What materials is this insert suitable for? The CCGT09T302 J740 insert is designed for general turning and, with the Tungaloy J740 carbide grade, offers a balance of wear resistance and toughness suitable for a broad range of steels and alloyed materials. How is the insert secured to the holder? This indexable insert features a cylindrical hole with a single-sided countersink (40°–60°) and must be used with a compatible holder that matches the ISO rhombic seat, the plate size 09 and the 3.97 mm thickness to ensure correct clamping and repeatability. What does the 0.2 mm corner radius mean for surface finish? A 0.2 mm corner radius provides finer edge geometry for closer tolerances and improved surface finish on turned components; it is suitable where precise radii or reduced tool marks are required. Can the insert be used for internal turning as well as external? Yes, the rhombic geometry and the 80° cutting edge make the plate suitable for both external and internal turning applications when mounted in the appropriate holder. How does the J740 grade affect tool life? The J740 Tungaloy carbide grade combines wear resistance with sufficient toughness to maintain edge stability, which generally extends tool life and helps sustain consistent performance over longer production runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 J740 Wendeplatten - Tungaloy
Take advantage of the combination of the J740 material grade, precise 0.2 mm nose radius and ISO‑compatible rhombic geometry for steady turning results and reduced tool changes; order the insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT09T302 J740 — CCGT ISO turning insert for turning by Tungaloy CCGT09T302 J740 is an ISO‑standard rhombic indexable insert engineered for turning operations, supplying a balance of wear resistance and edge stability for both light finishing and stable production cuts. ISO-standard rhombic insert, size 09 J740 grade for wear resistance and toughness 0.2 mm nose radius for fine finishing 7° relief angle, compatible with ISO holders Durable grade and substrate for consistent cutting performance The insert uses a Tungaloy J740 grade on a solid carbide substrate, selected to combine wear resistance with sufficient toughness for repeatable edge life under varied turning conditions. The J740 designation denotes a cutting material engineered to support stable chip formation and extended tool life where edge retention matters; this leads to fewer interruptions for insert changes and a more predictable machining process. As an ISO‑specified plate, the component integrates into established toolholders and clamping systems when the holder's form, relief angle and tolerance match the insert geometry. Geometry and mounting designed for secure clamping and fine surface finish A rhombic geometry with an effective cutting angle of 80°, a 0.2 mm nose radius and 3.97 mm thickness delivers both rigidity and the option for close finishing passes. The insert is supplied with a cylindrical hole and a single‑sided countersink (40°–60°), allowing stable fixation with common clamping screws and locating elements. These mechanical details reduce micro‑movement at the cutting edge, improving surface quality and repeatability. Compatibility with a holder is determined by the insert’s form, relief angle, tolerance class, fastening method, size and thickness — check these parameters when selecting the mating toolbody. Practical benefits in production: chip control and easier process planning The one‑sided chipbreaker design helps to direct swarf and manage cutting forces for predictable chip flow in turning tasks. The combination of the J740 grade and the chipbreaker supports steady metal removal rates and helps maintain edge stability over longer cycles, which in turn reduces downtime and scrap. For process planning, the insert’s ISO conformity and clearly defined geometrical data simplify inventory management and reordering. When selecting an insert for a particular job, choose the chipbreaker and grade to suit the workpiece material, type of cut and machine stability to obtain the best compromise between material removal rate and surface finish. For precision turning with the Tungaloy J740 grade, order the CCGT09T302 through Metav Werkzeuge or contact the Metav Werkzeuge technical team at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice and rapid supply Technical data Article number: 6801322 Manufacturer SKU: TUN6801322 Model series: ISO‑turning inserts Key measurements Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Insert angle: 80° Construction & special features Material: carbide Grade: J740 Shape: rhombic Hole: with hole Hole style: cylindrical hole + single‑sided countersink (40°–60°) Chipbreaker: one‑sided FAQ What materials is the insert suitable for? The CCGT09T302 J740 insert is a carbide indexable insert in the J740 grade; select the chipbreaker and cutting parameters to suit the specific workpiece material and machining conditions. How is the insert fixed in the holder? The insert uses a cylindrical hole with a single‑sided countersink (40°–60°) for screw clamping; ensure the holder matches the insert form, size and tolerance class for secure fixation. What surface finish can be expected with the 0.2 mm radius? A 0.2 mm nose radius on the CCGT09T302 supports fine finishing passes and improved surface quality when combined with appropriate feeds and speeds. Is this insert compliant with ISO standards? Yes, the plate follows ISO specifications for turning inserts; compatibility depends on matching the holder’s geometry and tolerance class. Which chipbreaker does the plate use and what is its benefit? The insert features a one‑sided chipbreaker designed to control swarf and stabilise cutting forces during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 KS05F Wendeplatten - Tungaloy
Take advantage of the combination of KS05F wear resistance, 0.2 mm corner radius and ISO compatibility for consistent machining results; ideal where repeatable edge stability and straightforward insert replacement keep cycle times low. Order the CCGT09T302 KS05F insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT09T302 KS05F CCGT — ISO indexable insert for turning, 80° rhombic, 0.2 mm (Tungaloy) A CCGT09T302 KS05F indexable insert engineered for ISO-conforming external and internal turning applications, combining a robust carbide grade with a single-sided chipbreaker. *ISO-compatible 80° rhombic insert *KS05F Tungaloy carbide grade *0.2 mm corner radius for fine profiling *Cylindrical hole with single-sided countersink Higher productivity through predictable edge life The CCGT insert is based on a carbide substrate and the KS05F grade, selected to balance wear resistance and edge stability for turning operations. This combination reduces unplanned rework by extending the period between index changes, which translates directly into higher machine uptime. ISO-conforming geometry ensures predictable positioning and repeatable performance when paired with matched holders and clamping kits. Secure seating and reliable clamping for consistent cuts Designed with an 80° rhombic form and a cylindrical hole with a single-sided countersink (40°–60°), the insert delivers stable clamping in standard ISO holders. The 7° relief helps control cutting forces and reduces rubbing at the clearance face, while the 0.2 mm corner radius supports fine profiling and controlled chip formation. Clear mechanical features allow a quick assessment of suitability for a given toolholder and setup, simplifying tooling decisions on the shop floor. Application focus and adaptability to workpiece demands Intended primarily for turning, this insert suits both external and internal operations when the single-sided chipbreaker matches the chosen cutting parameters. The KS05F composition complements the insert geometry by providing a compromise between toughness and wear resistance, making it suitable for a range of steels and general turning tasks. For specialised materials or finishing tolerances, selecting the appropriate chipbreaker and adjusting feeds will deliver the desired surface quality and tool life; consult tooling guides to match process parameters precisely. Contact Metav Werkzeuge today to request a tailored recommendation for holders and process settings for this Tungaloy KS05F insert and ensure optimal setup for the intended turning task Technical data Article number: 6822274 Manufacturer SKU: TUN6822274 Brand: Tungaloy Model series: ISO turning indexable inserts Designation: CCGT09T302 KS05F Facts Shape angle: 80° Corner radius: 0.2 mm Relief angle: 7° Insert size: 09 Thickness: 3.97 mm Special features Material: carbide Grade: KS05F (Tungaloy) Plate form: rhombic Chipbreaker: single-sided Hole style: cylindrical hole + single-sided countersink (40°–60°) ISO-conforming insert FAQ What turning tasks is this insert best suited to? The CCGT09T302 KS05F insert is designed for general external and internal turning where a balance of wear resistance and edge stability is required; it performs well in routine steel turning operations and where predictable edge life is valued. How does the KS05F grade affect tool life? The KS05F Tungaloy grade provides a compromise between toughness and hardness, improving wear resistance and maintaining a stable cutting edge under typical turning loads, which enhances the repeatability of tool life. Which holders are compatible with this ISO insert? Compatibility depends on insert form, size and tolerance; the CCGT09T302 KS05F fits ISO holders matching a 09-size rhombic insert with 80° geometry and the corresponding clamping arrangement and screw pattern. What advantages does the 0.2 mm corner radius provide? A 0.2 mm corner radius offers finer profiling capability and a controlled transition between edge and flank, helping to reduce stress concentrations and producing consistent surface finishes on turned components. Is the insert suitable for finishing and roughing operations? The CCGT09T302 KS05F can serve both finishing and light roughing, provided the chipbreaker and cutting parameters are selected to match the material and desired surface quality; heavier roughing may require different grades or larger radii. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, ISO compatibility and economical tool life for consistent serial production; order the inserts directly via Metav Werkzeuge or consult the specialists for application matching and fast delivery. CCGT09T302 NS9530 — CCGT ISO turning insert for finishing by Tungaloy CCGT09T302 NS9530 is an ISO rhombic turning insert designed for precision finishing in steel-turning applications. ISO rhombic insert, 80° cutting angle Uncoated cermet grade NS9530 0.2 mm corner radius for fine finish Cylindrical hole with 40°–60° countersink Consistent fine finishing with low cutting forces The insert offers a sharp uncoated cermet edge formulated as NS9530, optimised for finishing operations on steel. As a finishing grade, it delivers low cutting forces and a reliably high surface finish, which reduces downstream grinding and rework. The combination of a razor-sharp edge and 0.2 mm corner radius supports stable, continuous cuts and consistent dimensional results in repetitive production runs. This focus on process stability translates into predictable cycle times and fewer rejected parts. ISO compatibility and secure clamping for predictable performance Designed to the ISO plate family, the component ensures fitment where form, relief angle, tolerance class, fastening, size and thickness match the toolholder. The 80° cutting angle and 7° relief produce a robust contact geometry suited to many standard holders, while the cylindrical hole with single-side countersink (40°–60°) simplifies positive locating and fastening. With a plate thickness of 3.97 mm and rhombic profile, the insert integrates into conventional systems, allowing straightforward holder selection and minimal set-up time for shop-floor technicians. Productivity gains and economical operation in finishing Choosing a finishing cermet such as NS9530 contributes to reduced micro-chipping and consistent edge condition, which in turn improves batch yield and lowers total machining cost per part. The grade supports reliable chip formation under continuous cuts and small depths of cut, promoting stable tool life and constant surface quality across long production runs. The result is measurable efficiency: fewer interruptions for tool change, less scrap and a tighter adherence to surface-tolerance specifications that benefit overall throughput. Application notes and selection guidance for optimal results For turning applications where fine surface integrity is the priority, the CCGT09T302 NS9530 insert excels in light finishing passes on steel. Match the single-sided chipbreaker to material stability and choose modest feeds and small depths of cut for best outcomes. Lubrication or a light cutting fluid often improves surface finish with uncoated cermet grades; toolholders with good rigidity and accurate clamping will maximise the insert’s repeatable performance. Where interrupted cuts or heavy depths are required, select a more robust geometry or coated grade tailored to the higher mechanical demands. Request tailored application advice from Metav Werkzeuge for Tungaloy NS9530 finishing inserts and arrange rapid supply or technical matching by email at info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 6997904 SKU: 6997904-Tungaloy Manufacturer SKU: TUN6997904 Designation: CCGT09T302 NS9530 Tungaloy insert Core specifications Cutting angle: 80° Relief angle: 7° Thickness: 3.97 mm Corner radius: 0.2 mm Design and features Material: carbide Grade: uncoated cermet NS9530 Chipbreaker: single-sided Hole style: cylindrical hole + single-side countersink (40°–60°) Plate form: rhombic Intended use: turning / finishing of steel FAQ What materials is this insert intended for? The CCGT09T302 NS9530 Tungaloy insert is a finishing grade developed primarily for steel, providing an uncoated cermet chemistry that enhances surface quality in continuous finishing operations (SKU 6997904-Tungaloy). Is the insert compatible with standard ISO holders? Yes; the insert conforms to ISO turning plate dimensions and its fit depends on form, relief angle, tolerance class, fastening, size and thickness; the 80° geometry and cylindrical hole with countersink support common clamping systems. Which machining conditions suit this grade best? The uncoated cermet NS9530 performs best with light finishing feeds and small depths of cut under continuous cutting. Use a rigid holder and consider a light cutting fluid to improve surface finish when required. Can the insert be used for interrupted or heavy roughing cuts? This finishing grade is optimised for continuous finishing; for interrupted cuts or heavy roughing, a tougher geometry or a coated, wear-resistant grade is recommended to withstand shock and higher loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 finishing grade and the fine 0.2 mm nose radius to achieve superior surface quality in light finishing cuts; ordered as a ready-to-fit ISO insert it reduces setup time and supports stable, continuous turning operations. Order the insert directly via Metav Werkzeuge or ask our consultants if assistance is required. CCGT 09T302 NS9530 turning insert — uncoated cermet, 0.2 mm nose radius (Tungaloy) A CCGT 09T302 NS9530 insert engineered for precision external and internal turning on steel, offering a sharp cutting edge and low cutting forces for high-quality finishing. Uncoated cermet NS9530 for superior finish 0.2 mm nose radius for precise profile control ISO CCGT rhombic insert, 80° included angle Cylindrical hole with single-sided 40°–60° countersink Exceptional finish on steel with a finishing cermet The uncoated NS9530 grade is designed as a dedicated finishing solution for steel machining. As a cermet cutting material it offers a very sharp cutting edge, enabling lower cutting forces and excellent surface quality in continuous cuts and small depths of cut. The result is fewer secondary operations and more predictable part quality. For users seeking a premium surface without extensive grinding or polishing, this grade is an efficient choice that supports stable production cycles. Reliable ISO fit and straightforward tool changeovers Compatibility is governed by the ISO form and key dimensions; this insert follows the ISO CCGT format (designation CCGT09T302) and presents a rhombic profile with an 80° included angle and a 7° clearance. The mount uses a cylindrical hole with a single-sided countersink (40°–60°), which simplifies clamping on standard holders. Knowing these parameters allows rapid verification of holder suitability and reduces downtime during tool changes, providing a consistent, repeatable setup in mixed-machine environments. Practical machining guidance for consistent results The small 0.2 mm corner radius is ideal for fine profiles and shallow passes; it supports precise contouring while limiting cutting forces. Given the insert’s one-sided chipbreaker, select a matching chip control geometry and ensure a rigid clamping arrangement to exploit the NS9530 benefits fully. For interrupted cuts or heavy roughing, consider a more robust grade; for light finishing passes and continuous operations, this insert will deliver cleaner surfaces and reduced tendency to build up on the edge, helping to maintain dimensional accuracy and visual quality. Contact Metav Werkzeuge for tailored advice on Tungaloy finishing inserts and to secure the CCGT 09T302 NS9530 for your turning applications — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997912 Manufacturer article number: 6997912 SKU: 6997912-Tungaloy Manufacturer SKU: TUN6997912 Model series: ISO-Drehwendeschneidplatten Material: Cemented carbide Application: Turning Key measurements ISO designation: CCGT09T302 Size: 09 Corner radius: 0.2 mm Thickness: 3.97 mm Included angle: 80° Clearance angle: 7° Design and features Uncoated cermet grade NS9530 Rhombic plate form With hole Cylindrical hole with single-sided countersink (40°–60°) Single-sided chipbreaker Fine finishing grade for steel Sharp cutting edge for low cutting forces FAQ What materials is this insert intended for? The NS9530 finishing grade is intended primarily for steel machining; the CCGT 09T302 NS9530 insert is optimised for continuous finishing passes on steel workpieces. Can this insert be used for internal and external turning? Yes, the ISO CCGT format and rhombic form suit both external and internal turning operations when mounted in a compatible holder. Is the CCGT09T302 suitable for interrupted cuts? This finishing grade is best for continuous cuts and small depths of cut; for frequent interrupted cutting, a tougher grade is recommended. How is the insert secured to the holder? The insert uses a cylindrical hole with a single-sided countersink (40°–60°); compatibility depends on holder form, tolerance class, size and thickness. What does the 0.2 mm radius mean for part finish? A 0.2 mm corner radius produces fine profiles and helps achieve a high surface finish while controlling cutting forces during light passes. Which chipbreaker does this insert have? The product is supplied with a single-sided chipbreaker suited to finishing operations and optimised for stable chip formation on steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the uncoated cermet NS9530 and the 80° rhombic geometry with a 0.2 mm nose radius for consistent finishing performance and low cutting forces; order the insert directly via Metav Werkzeuge or consult their application specialists for machining parameters. CCGT09T302 NS9530 CCGT — ISO turning insert for finishing, Tungaloy A CCGT09T302 NS9530 rhombic ISO turning insert designed as a finishing grade for steel, combining a sharp cutting edge with stable chip control. Uncoated cermet grade NS9530 For finishing turning on steel 80° rhombic geometry, 0.2 mm nose radius Cylindrical hole with 40°–60° countersink Exceptional surface quality with low cutting forces The insert is designed as a finishing grade using the NS9530 uncoated cermet, which provides a sharp cutting edge and reduced cutting resistance. For finishing passes on steel, this results in improved surface finish and minimal tool-induced vibration. The composition of the cermet offers a balance between edge strength and wear resistance, making the cutting edge particularly effective for continuous cuts and small depths of cut while keeping the energy input per pass low. Geometry tuned for stability and predictable chip behaviour The 80° rhombic outline and the 0.2 mm nose radius deliver a predictable contact geometry that reduces radial cutting forces and supports consistent dimensional control. The integrated single-sided chipbreaker is optimised for continuous cutting, breaking chips reliably at small feeds and helping to avoid built-up edge. A small nose radius is advantageous for tight tolerances and fine surface finishes, as it concentrates the cutting action while lowering the tendency for chatter on less rigid set-ups. ISO conformity and secure mounting for reliable setup Marked as an ISO-type CCGT insert, compatibility with a holder is determined by form, relief angle, tolerance class, fastening, size and thickness. The insert features a cylindrical hole with a one-sided countersink (40°–60°) and a plate thickness of 3.97 mm, which supports standard clamping systems and predictable seating. This ISO conformity simplifies tool selection and reduces setup time, ensuring repeatable clamping and consistent tool life across batches and machines. Practical machining guidance for finishing on steel As an uncoated finishing grade, the insert performs best in continuous cuts and modest feed rates where the excellent cutting edge yields superior topography. Matching the NS9530 grade with appropriate cutting data—reduced feed and moderate cutting speeds for final passes—will retain edge integrity and surface integrity. For interrupted cuts or unstable workholding, consider a different chipbreaker or a more robust grade; for stable finishing operations, the insert delivers controlled material removal and superior surface quality. The insert CCGT09T302 is particularly suited to external and internal turning where fine finishes and tight tolerances are required. For finishing-focused turning applications, request availability and application advice for the Tungaloy CCGT09T302 NS9530 insert from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6714354 SKU: 6714354-Tungaloy Manufacturer SKU: TUN6714354 Model series: ISO-Drehwendeschneidplatten ISO designation: CCGT09T302 Manufacturer: Tungaloy Facts Angle: 80° Relief angle: 7° Nose radius: 0.2 mm Thickness: 3.97 mm Insert size: 09 Special features Grade: NS9530 Cutting material type: uncoated cermet Plate form: rhombic Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Application: Drehen (turning) Typical use: External and internal finishing FAQ What turning operations is this insert suited for? The CCGT09T302 NS9530 insert is intended for external and internal turning operations, especially finishing passes on steel where a sharp edge and fine surface finish are required. Is the CCGT09T302 coated or uncoated? The CCGT09T302 is an uncoated cermet (NS9530) grade, optimised for low cutting forces and high surface quality in finishing applications. What does the 0.2 mm nose radius mean for machining? A 0.2 mm nose radius concentrates the cutting action to enable tighter tolerances and smoother finishes; it is ideal for small depths of cut and applications where dimensional accuracy and surface integrity are priorities. Which clamping criteria determine holder compatibility? Compatibility depends on form, relief angle (7°), tolerance class, fastening, size (09) and plate thickness (3.97 mm); the ISO CCGT designation simplifies matching to standard holders. What is the hole and countersink specification? The insert features a cylindrical hole with a one-sided countersink in the 40°–60° range, providing secure seating and standardised clamping for ISO-style toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 NS9530 Wendeplatten - Tungaloy
Product data inconsistent: the cutting material is listed as "uncoated cermet" while the material field specifies "Hartmetall" (cemented carbide). This discrepancy creates confusion and makes it challenging to determine the correct material type, which is crucial for accurately describing the product's properties, potential applications, and suitability for specific machining tasks. Without clear and consistent information, it is impossible to generate a reliable product description that meets the necessary standards for clarity and accuracy. Resolving this issue requires verifying the correct material designation and ensuring alignment between all data fields to avoid misunderstandings or misrepresentation of the product's characteristics.
CCGT 09T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge and a 0.2 mm corner radius for superior finishing, together with ISO compatibility for easy integration into existing toolholder systems. Order the CCGT09T302 NS9530 insert directly via Metav Werkzeuge or consult our specialists for application advice. CCGT09T302 NS9530 CCGT — Tungaloy indexable turning insert, 0.2 mm radius, 7° clearance CCGT09T302 NS9530 — a rhombic indexable insert for precision finishing in turning applications Sharp cutting edge for fine finishing 0.2 mm nose radius for precise contours 7° clearance angle for low cutting forces Compatible with ISO turning toolholders Improved surface quality with a finishing-grade cermet The insert is made from an uncoated cermet finishing grade NS9530, designed specifically for low cutting forces and a very fine surface finish when turning steel. The composition and sharp geometry produce clean shearing at small depths of cut, which reduces the need for secondary polishing. As a result, cycle times for finishing operations can be shortened while maintaining consistent dimensional accuracy and improved part aesthetics. Secure mounting and predictable tool behaviour Designed to the ISO standard, the rhombic form with an 80° approach angle delivers a balance of accessibility and edge strength. The insert features a cylindrical hole with a single-sided countersink (40°–60°) to ensure stable clamping and repeatable seating in the pocket. The moderate 3.97 mm thickness and defined tolerance class contribute to consistent tool alignment, which reduces vibration and provides reliable cutting performance across series production. Practical application advice for productive turning Select this finishing insert for continuous cuts and small feeds where surface quality is the priority. The 0.2 mm corner radius supports precise profiling and fine contouring, while the 7° clearance contributes to reduced cutting forces and lower heat generation. The indexable insert is intended to be used as part of a system — insert plus compatible holder, shim and clamp — which simplifies inventory management and quick index changes. Regular inspection of the cutting edge and adherence to recommended feeds and depths of cut will extend service life and maintain repeatable results. For finishing tasks that demand consistent surface quality from a trusted brand, contact Metav Werkzeuge to order the Tungaloy CCGT09T302 NS9530 insert or request application guidance from our technical team. Technical Data Article number: 6997905 SKU: 6997905-Tungaloy Manufacturer SKU: TUN6997905 Model series: ISO turning indexable inserts Designation: CCGT09T302 NS9530 Tungaloy insert Facts Corner radius: 0.2 mm Clearance angle: 7° Thickness: 3.97 mm Insert size: 09 Approach angle: 80° Special features Grade: NS9530 (uncoated cermet finishing grade) Shape: rhombic (80°) Hole style: with cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (finishing), suited to steel Material: carbide substrate FAQ What materials is this insert best suited for? The CCGT09T302 NS9530 insert is formulated as a finishing grade for steel; the NS9530 uncoated cermet provides low cutting forces and excellent surface finish when turning steel. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius offers precise contouring and improved finish on small depths of cut while reducing the risk of edge chipping during continuous finishing operations with the CCGT09T302. Is the insert compatible with standard ISO toolholders? Yes, the insert conforms to ISO turning insert standards; compatibility depends on holder form, clearance, tolerance, fastening method, size and thickness, but the ISO designation ensures broad interchangeability. What does the hole and countersink design provide? The cylindrical hole with a single-sided countersink (40°–60°) ensures stable seating and repeatable clamping, minimising movement under cutting loads and improving dimensional consistency. Which components are required to assemble a working insert system? A complete system comprises the indexable insert, a matching external holder or boring bar, a shim/seat, a clamp set and the appropriate replacement screw; correct assembly ensures the expected performance of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 SH7025 Wendeplatten - Tungaloy
Benefit from a combination of reliable edge stability, ISO compatibility and straightforward handling to maintain productive turning operations with minimal setup time; the coated grade ensures consistent tool life under variable engagement conditions. Order the CCGT09T302 SH7025 turning insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT09T302 SH7025 turning insert by Tungaloy — coated carbide, 80° rhombic geometry The CCGT09T302 SH7025 is an ISO‑standard rhombic indexable insert designed for turning applications, offering a balance of toughness and edge stability for external and internal machining in variable engagement scenarios. ISO rhombic insert, 80° geometry Coated carbide SH7025 for edge stability Single-sided chipbreaker for controlled chips 0.2 mm corner radius for fine finishing Consistent process stability through SH7025 coating and substrate The graded SH7025 composition is a coated carbide designed for high stability at the cutting edge, which reduces premature wear when conditions change or when using smaller toolholders. The combination of a tough substrate and modern coating technology enables more predictable flank wear and longer intervals between index changes. In practical terms this means fewer unscheduled interruptions to production and a more constant surface quality on turned components, supporting efficient batch processes and mixed‑material workflows. Reliable geometry for repeatable surface quality and finishing The rhombic 80° geometry together with a 0.2 mm corner radius produces a balance between strength and fine finishing capability. The insert’s single‑sided chipbreaker controls chip formation to favour stable cutting forces and easier chip evacuation, which is particularly beneficial in confined tool setups. The plate thickness 3.97 mm and the standardised hole pattern (cylindrical hole with one‑sided countersink 40°–60°) ensure secure clamping and repeatable seating in ISO holders, translating into reliable tolerances and reduced rework for precision turning tasks. System compatibility and practical selection guidance for workshops As an ISO‑specified indexable insert, the component integrates into standard systems consisting of an insert, appropriate external holder or boring bar, shim/underlay and clamping set with replacement screws. Selection of the correct chipbreaker and grade should follow the workpiece material and machining strategy: choose a more aggressive chip control for unstable cut conditions or the SH7025 grade for operations where edge stability under variable engagement is prioritised. The insert supports both external and internal turning operations, making it suitable for small to medium workshop batches and for production environments seeking dependable, easy‑to‑standardise tooling solutions. For application advice or to reserve stock of the Tungaloy CCGT09T302 SH7025 insert contact Metav Werkzeuge for technical consultation and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6967371 Manufacturer SKU: TUN6967371 SKU: 6967371-Tungaloy Model series: ISO turning indexable inserts ISO designation: CCGT09T302 Core specifications Geometry angle: 80° Relief angle: 7° Corner radius: 0.2 mm Plate thickness: 3.97 mm Size designation: 09 Features and materials Grade/coating: SH7025 Substrate: coated carbide Plate shape: rhombic Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: turning (external and internal) Compatible system components: ISO insert, matching holder, shim/underlay, clamp set, replacement screws FAQ What materials is this insert designed to machine? The Tungaloy CCGT09T302 SH7025 insert is formulated as a versatile coated carbide grade suitable for a wide range of turning tasks; matching the chipbreaker and cutting data to the specific material ensures optimal performance. How does the 0.2 mm corner radius affect part finish? A 0.2 mm corner radius provides improved edge strength while enabling fine finishing; the geometry helps maintain consistent surface quality on turned components when using appropriate feeds and speeds with the insert. Is the insert suitable for both external and internal turning? Yes, the ISO rhombic format and the CCGT09T302 designation permit use in both external and internal turning applications provided a compatible holder and correct clamping are used. What mounting features ensure secure clamping? The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°), which together with the plate thickness of 3.97 mm ensures a solid seating and repeatable clamping in ISO‑compatible toolholders. Which chipbreaker should be selected for unstable engagement conditions? For variable cutting engagements, a conservative chip control profile is recommended; the single‑sided chipbreaker on this insert supports controlled chip formation, while the SH7025 grade helps maintain edge stability under shifting loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 SH7025 Wendeplatten - Tungaloy
Take advantage of the reliable combination of SH7025 coated carbide and precise geometry for consistent cutting performance and predictable tool life; order through Metav Werkzeuge or request tailored advice if assistance is required. CCGT09T302 SH7025 ISO rhombic turning insert for turning — Tungaloy CCGT09T302 SH7025 is a rhombic ISO turning insert designed for external and internal turning, featuring a 7° clearance angle and an 80° included angle for stable engagement and predictable cutting behaviour ISO rhombic insert, 80° included angle Coated carbide grade SH7025 for toughness 0.2 mm corner radius for precise profiling Cylindrical hole with single-side countersink Consistent cutting performance under variable conditions The combination of SH7025 and coated carbide construction delivers a balance of toughness and wear resistance that promotes edge stability during intermittent cuts and mixed engagement situations. The grade is formulated for turning tasks where small toolholders or changing cutting depths are used, reducing the frequency of unexpected edge failures. As a result, process reliability increases and cycle-time variation is minimised, supporting a more predictable production flow. Clear mounting geometry and what it means for setup Compatibility follows ISO norms and is governed by form, 7° clearance, tolerance class, mounting, size and thickness. The rhombic plate form with an 80° included angle and a cylindrical hole with a single-side countersink (40°–60°) simplifies secure clamping and repeatable positioning. With a plate thickness of 3.97 mm and a 0.2 mm corner radius, the geometry supports accurate profiling and robust seat contact; the single-sided chipbreaker concentrates chip control on the active face, which aids evacuation and stability in both external and internal turning applications. Operational advantages and application guidance Designed for turning operations, this insert provides a practical route to consistent surface finish and extended service intervals when matched to the correct chipbreaker and cutting parameters. The single-sided chipbreaker assists with controlled chip formation in a range of chip loads, while the coated carbide body withstands common turning stresses. For best results, select a chipbreaker and the correct cutting data to match workpiece material and machine rigidity — this approach transforms the insert’s technical properties into measurable shop-floor gains, such as reduced setup time and fewer tool changes, yielding better throughput and increased confidence in daily production. For machining advice and availability of the Tungaloy CCGT09T302 SH7025 insert, contact Metav Werkzeuge for personalised recommendations at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6967448 SKU: 6967448-Tungaloy Manufacturer SKU: TUN6967448 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Designation: CCGT09T302 SH7025 Facts Size designation: 09 Included angle: 80° Clearance angle: 7° Corner radius: 0.2 mm Plate thickness: 3.97 mm Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Special features ISO-standard rhombic insert Coated carbide grade SH7025 Single-sided chipbreaker Suitable for external and internal turning Compatibility determined by form, clearance, tolerance, mounting, size and thickness Recommended for small-tool applications and varying engagement conditions FAQ Is the insert suitable for internal turning operations? The rhombic geometry and the cylindrical hole with countersink make the insert suitable for both external and internal turning when used with the correct holder and mounting hardware; the CCGT09T302 SH7025 insert is designed for such versatile use. What advantages does the SH7025 grade offer compared with uncoated carbide? SH7025 is a coated carbide grade that provides improved toughness and edge stability over uncoated grades, making the insert more resilient in variable engagement and when small tools are employed. How does the 0.2 mm corner radius affect component finish? A 0.2 mm corner radius delivers precise profiling capability and helps achieve consistent surface finish on small feature radii while balancing strength at the cutting edge. Which holder characteristics must match the insert? Compatibility requires matching the insert form, 7° clearance, tolerance class, mounting arrangement, size and thickness to the holder or boring bar to ensure correct seating and secure clamping. Can the insert’s chip control be adapted for different materials? Yes, chip control depends on selecting the appropriate chipbreaker and cutting data for the workpiece material and machining stability; the single-sided chipbreaker on this insert assists in predictable chip formation across a range of conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 SH7025 Wendeplatten - Tungaloy
Achieve consistent chip control and longer tool life through the combination of a tough coated grade (SH7025) and a stable 80° rhombic geometry; the result is efficient turning performance with predictable edge behaviour. Order the insert directly via Metav Werkzeuge or contact the team for tailored application advice. CCGT 09T302 SH7025 — Indexable turning insert for turning, Tungaloy CCGT 09T302 SH7025 is an ISO-form rhombic indexable insert engineered for general turning applications, offering a robust cutting edge for changing engagement conditions and smaller tooling assemblies. ISO rhombic insert, 80° shape SH7025 coated carbide grade 0.2 mm nose radius for fine finishes Compatible with ISO turning holders Consistent cutting performance under variable conditions The combination of the SH7025 coating and a durable coated carbide substrate delivers a reliable cutting edge that resists chipping during intermittent contact or varying depths of cut. This behaviour supports a reduction in unplanned tool changes and contributes to more predictable cycle times. The grade is designed to perform particularly well in smaller tooling arrangements where thermal and mechanical loads fluctuate; selecting an appropriate chipbreaker and matching the grade to the workpiece material will further extend service life. The construction aims to balance toughness and wear resistance to keep machining stable across common turning challenges. Geometry engineered for precision and surface quality The 80° rhombic shape provides a favourable compromise between strength and accessibility, allowing for robust roughing as well as controlled finishing passes. With a 0.2 mm nose radius, the insert is suited to fine finishing tasks where surface integrity and dimensional conformity matter. The insert presents a 7° relief angle and a plate thickness of 3.97 mm, which together support stiffness when mounted in standard ISO holders. The central hole with a cylindrical bore plus a single-side countersink (40°–60°) ensures secure clamping and repeatable seat seating, reducing variability at re-indexing and improving repeatable concentricity. Simple integration into ISO-based tooling systems Compatibility is determined by insert form, relief angle, tolerance class, fixing type, size and thickness; the ISO conformity of this series eases selection of matching external holders, shims and clamps. A standard system setup comprises the ISO indexable insert, a suitable turn holder or boring bar, and the required shim/klemmsatz and replacement screws. This modular approach reduces setup times and simplifies inventory management, which is particularly advantageous for production environments seeking predictable tool-change workflows and reduced downtime. Applications and practical recommendations Designed primarily for turning operations, the insert excels where cutting conditions vary or where the tooling package is compact. The single-sided chipbreaker concept helps to control swarf when paired with the correct grade and machining parameters. For best results, choose a chipbreaker and cutting data aligned with the workpiece material and machining strategy; when in doubt, match the insert to an ISO holder that corresponds to the 09 size and 80° geometry. The designation CCGT09T302 indicates the ISO form and corner geometry; this designation appears on the item data and should be used to confirm compatibility when ordering replacement inserts. Contact Metav Werkzeuge today for application guidance, availability and matching holder recommendations for the Tungaloy CCGT 09T302 SH7025 indexable turning insert; Metav Werkzeuge can advise on optimal chipbreakers and mounting options Technical data Article number: 6967378 Manufacturer SKU: TUN6967378 SKU: 6967378-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts Corner radius: 0.2 mm Shape angle: 80° Relief (clearance) angle: 7° Plate thickness: 3.97 mm Size: 09 Special features ISO rhombic form Coated grade SH7025 Single-sided chipbreaker Central hole: cylindrical bore + single-side countersink (40°–60°) Designed for turning; compatible with ISO holders Suitable for small tools and varying engagement conditions FAQ What machining tasks suit this coated grade best? The SH7025 grade is a tough, wear-resistant coating suited to general turning tasks; the CCGT 09T302 SH7025 insert performs well where engagement can vary or interruptions occur. Which holders are compatible with this insert? Compatibility follows the ISO form and size; the 80° rhombic form and 09 size require holders designed for ISO rhombic inserts and matching thickness and clamping arrangements. What surface finish can be expected with a 0.2 mm nose radius? A 0.2 mm nose radius typically supports fine finishes and tight dimensional control when used with appropriate feeds and speeds; the small radius reduces tool pressure for delicate finishing. Is the insert suitable for internal as well as external turning? Yes, the insert’s geometry and chip control concept permit both external and internal turning applications when installed in the correct holder and with proper cutting data. How is chip control achieved with this insert? Chip control relies on selecting the correct chipbreaker and cutting parameters for the workpiece; the single-sided chipbreaker on this insert supports consistent swarf formation in many turning scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide SH7025 grade and precise rhombic 80° geometry for consistent turning results; its 0.2 mm nose radius and secure mounting make it a reliable choice for finishing operations — order the insert directly via Metav Werkzeuge or consult the technical team for application advice. CCGT 09T302 SH7025 Turning Insert — ISO indexable turning insert by Tungaloy The CCGT09T302 SH7025 is an ISO indexable turning insert for external and internal turning, featuring a rhombic form with an 80° cutting angle and a 0.2 mm nose radius for fine finish work Coated carbide grade SH7025 Rhombic geometry, 80° cutting angle 0.2 mm nose radius for fine finishing Cylindrical hole with single-sided countersink Increased process reliability through material and grade selection The combination of a coated carbide substrate and the SH7025 grade provides a robust cutting edge that maintains stability under variable engagement conditions. This makes it particularly suited to operations where tool life and consistent surface quality are priorities. The coated structure reduces flank wear and helps control built-up edge formation, resulting in fewer interruptions and predictable reconditioning cycles. When used with an appropriately specified holder, the insert contributes to steady cutting forces and reduced vibration, supporting higher machine utilisation and lower rework rates. Geometry engineered for surface quality and secure clamping A rhombic insert with an 80° principal cutting angle and a 0.2 mm nose radius is optimised for finishing passes where surface integrity and dimensional control are required. The single-sided chipbreaker aids chip control for lighter cuts, while the cylindrical hole with a single-sided countersink (40°–60°) ensures positive, repeatable clamping in compatible toolholders. Tight tolerances in plate thickness and relief geometry contribute to stable contact between insert and seat, which in turn supports consistent part-to-part repeatability and improved surface finish. Practical application notes and holder compatibility Designed for turning operations, including both external and internal machining, the insert requires selection of a matching holder based on form, relief angle, tolerance class, fixation method, size and thickness. The insert is supplied as an ISO-series plate and integrates into standard tool systems when these parameters are matched. For variable cutting conditions or smaller tooling assemblies, the SH7025 grade offers a balance of edge toughness and wear resistance, reducing the need for frequent index changes. For specific material applications and tool holder pairing, technical consultation via Metav Werkzeuge is recommended to ensure optimal tooling configuration. For reliable finishing with Tungaloy's SH7025 grade and secure clamping, contact Metav Werkzeuge for availability and tailored recommendations on the CCGT09T302 insert. Technical data Article number: 6967407 Manufacturer SKU: TUN6967407 SKU: 6967407-Tungaloy Model series: ISO indexable turning inserts Name / designation: CCGT09T302 SH7025 Material: coated carbide Grade: SH7025 Application: turning (external & internal) Core specifications Thickness: 3.97 mm Nose radius: 0.2 mm Relief angle: 7° Cutting angle: 80° Size code: 09 Plate form: rhombic Special features Single-sided chipbreaker Cylindrical hole + one-sided countersink (40°–60°) ISO-compatible Suitable for variable engagement conditions FAQ What materials is this insert suitable for? The insert in SH7025 grade is designed for a broad range of turning tasks; matching the chipbreaker and grade to the workpiece material is advised when using the CCGT09T302 SH7025 Tungaloy insert. How does the hole and countersink affect clamping? The cylindrical hole combined with a one-sided countersink (40°–60°) ensures positive seating and repeatable clamping when used with compatible ISO toolholders. Can the insert be used for both roughing and finishing? The geometry and 0.2 mm nose radius of this insert favour finishing operations; for heavy roughing, selection of a different chipbreaker or a more robust grade may be preferable. What should be considered when replacing an insert? When installing the CCGT09T302 SH7025 insert, verify holder compatibility by form, relief angle and thickness to maintain seat accuracy and cutting stability. Is the insert compatible with standard ISO turning systems? Yes, the insert is part of the ISO-series indexable plates and fits standard ISO holders when sizes and fixation methods correspond. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 SH7025 Wendeplatten - Tungaloy
Benefit from the SH7025 coated carbide grade and the 80° rhombic geometry for stable chip control and consistent tool life; the 0.2 mm nose radius provides accurate dimensional control and improved surface finish. Order genuine inserts via Metav Werkzeuge or consult our specialists for tailored recommendations. CCGT09T302 SH7025 indexable turning insert — ISO turning application, 80° geometry, Tungaloy CCGT09T302 SH7025 is an ISO-compliant rhombic insert designed for general turning applications, offering a balance of edge stability and adaptability for varying engagement conditions ISO rhombic insert with 80° geometry Coated carbide grade SH7025 for edge stability 0.2 mm nose radius for accurate finishes Cylindrical hole with 40°–60° countersink Consistent cutting performance for varied turning tasks The SH7025 coated carbide grade is formulated for edge stability under changing cutting conditions, making it suitable for a wide range of turning operations. The rhombic 80° geometry ensures favourable cutting forces for both roughing and finishing, while the single-sided chipbreaker promotes predictable chip formation. These characteristics reduce vibration and support reliable cycle times, which directly contributes to improved productivity and fewer unplanned tool changes. Precision results from a compact, stable design A 0.2 mm nose radius delivers fine surface quality and tight dimensional repeatability when machining shafts, shoulders or form details. The moderate 7° clearance angle supports secure cutting without excessive flank contact, lowering the risk of premature wear. For smaller tool assemblies or variable engagement depths, the combination of 3.97 mm plate thickness and rhombic form provides a stable cutting edge that helps maintain tolerances and reduces secondary finishing. Easy integration and secure clamping in ISO systems Compatibility with toolholders depends on form, clearance, tolerance class, fixing method, size and thickness. The insert comes with a cylindrical hole and a one-sided countersink (40°–60°), enabling positive and repeatable clamping in standard external holders or boring bars. Using ISO-indexable inserts in a modular holder system simplifies inventory management and replacement; the standardised format also supports fast set-ups and consistent orientation across multiple machines. For demanding turning operations, contact Metav Werkzeuge for application advice and to procure the genuine Tungaloy insert (SKU TUN6967449); email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support Technical data Article number: 6967449 Manufacturer SKU: TUN6967449 Label: CCGT09T302 SH7025 Tungaloy-Wendeplatte Dimensions & core data Size: 09 Geometry angle: 80° Nose radius: 0.2 mm Plate thickness: 3.97 mm Features & compatibility Material: carbide Coating / grade: SH7025 Clearance angle: 7° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning Model series: ISO indexable turning inserts FAQ What materials is this insert suitable for? The CCGT09T302 insert in grade SH7025 is intended for a broad range of turning tasks; its formulation supports stable cutting where edge retention under varying engagement is required. How is the insert secured in the holder? Clamping uses the cylindrical hole with a one-sided countersink (40°–60°) to achieve secure, repeatable fixation in compatible ISO external holders or boring bars. Can this insert be used for finishing operations? Yes — the 0.2 mm nose radius and the rhombic 80° geometry deliver the precision and surface quality expected for finishing, while maintaining robust edge life. Which tolerance and holder criteria determine compatibility? Compatibility is governed by the insert form, clearance angle, tolerance class, fixing method, size and thickness; these parameters must match the chosen holder to ensure correct seating and reliable performance. Is this an original Tungaloy product and how to order? This is an original Tungaloy indexable insert (SKU TUN6967449). For procurement and technical consultation contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 SH725 Wendeplatten - Tungaloy
Benefit from the combination of a 0.2 mm corner radius, SH725 coated carbide and a secure cylindrical-hole clamping design for reliable edge stability and consistent chip control; order the CCGT09T302 SH725 turning insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CCGT09T302 SH725 — ISO turning insert, coated carbide, 0.2 mm radius (Tungaloy) The CCGT09T302 SH725 is a rhombic, ISO-standard turning insert optimised for external and internal turning with a single-sided chipbreaker. Coated carbide grade SH725 Rhombic insert, 80° cutting angle 0.2 mm corner radius Cylindrical hole with single-sided countersink Consistent performance for mixed turning conditions The SH725 grade as a coated carbide combines toughness with edge stability, making it suitable for applications where cutting conditions vary or where smaller tool sizes are used. The result is consistent tool life and reliable chip control under intermittent or unstable engagement. By favouring a robust grade and a dedicated chip control geometry, the insert supports higher process reproducibility and contributes to improved overall productivity on turning centres and lathes. Geometry that balances strength and surface quality A rhombic form with an 80° cutting angle and a 0.2 mm corner radius provides a balance between strength at the cutting edge and the ability to achieve good surface finish. The insert's 7° clearance angle and a plate thickness of 3.97 mm ensure mechanical rigidity and secure seating in the holder, while the single-sided chipbreaker promotes predictable chip formation for typical turning operations. The cylindrical hole with one-sided countersink (40°–60°) allows stable clamping and repeatable positional accuracy, reducing vibration and extending life of the tool system. Clear compatibility and selection guidance for tool systems As an ISO-standard turning insert, compatibility depends on matching the insert form, clearance angle, tolerance class, fixation type, size and thickness with the chosen holder or boring bar. Typical system components include the insert itself, the appropriate external holder or boring bar, a shim or clamp and replacement screws. Selection of the single-sided chipbreaker and the SH725 grade should be guided by workpiece material, desired surface finish and machining stability. For complex assemblies or variable materials, tailored advice helps to choose the optimal chipbreaker and clamping arrangement. For high-reliability turning with Tungaloy SH725 grade, contact Metav Werkzeuge for application-specific recommendations and availability; Metav Werkzeuge’s technical team will advise on the ideal insert, holder and clamping solution. Technical data Article number: 6932699 Manufacturer SKU: TUN6932699 SKU: 6932699-Tungaloy Name: CCGT09T302 SH725 Tungaloy insert Brand: Tungaloy Dimensions & core data Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Cutting angle: 80° Grade: SH725 Features & materials Coated carbide material Rhombic shape Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker ISO-standard turning insert Suitable for external and internal turning FAQ Which materials is the CCGT09T302 SH725 insert suitable for? The CCGT09T302 SH725 insert is designed as a tough, edge-stable coated carbide grade for a broad range of turning tasks; choose the chipbreaker and machining parameters according to the workpiece material and process stability. What effect does the 0.2 mm corner radius have on machining? A 0.2 mm corner radius increases edge strength and reduces notch sensitivity, improving tool life while still allowing satisfactory surface finish in many turning operations. How is the insert clamped in the holder? Clamping is achieved via the cylindrical hole with one-sided countersink (40°–60°); this geometry enables secure seating with a shim or clamp and replacement screws to ensure repeatable positioning. Which holder characteristics must match the insert? Holder compatibility is determined by insert form, clearance angle, tolerance class, fixation method, size and thickness; matching these parameters ensures correct seating and accurate cutting geometry. What identifiers and SKUs belong to this product? Article number 6932699, manufacturer SKU TUN6932699 and SKU 6932699-Tungaloy identify the CCGT09T302 SH725 turning insert by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 SH725 Wendeplatten - Tungaloy
A compact indexable solution that combines SH725 coated cemented carbide for edge stability with a 0.2 mm corner radius and an ISO rhombic form for reliable turning performance. Order the inserts directly via Metav Werkzeuge or consult the Metav team for grade and holder matching. CCGT 09T302 SH725 turning insert (rhombic, 80°) — Tungaloy A CCGT09T302 SH725 ISO-compliant rhombic turning insert for external and internal turning, designed for variable engagement and smaller tooling. ISO-compliant rhombic 80° geometry SH725 coated cemented carbide grade 0.2 mm corner radius for versatile finishes Cylindrical hole with 40°–60° countersink Engineered for consistent turning performance The indexable insert presents an ISO geometry that ensures repeatable seating in compatible holders and predictable cutting behaviour. With an 80° rhombic form and a 0.2 mm corner radius, the component provides a balance between strength and finish quality, making it suitable for medium to light turning operations. The 3.97 mm thickness contributes to stability in the clamping zone, reducing vibration and supporting steady chip formation. These attributes result in improved process efficiency and fewer unexpected interruptions in production. Grade selection that suits changing conditions The SH725 grade is a coated cemented carbide designed for toughness and cutting-edge stability, especially where engagement varies or tool sizes are small. The coating enhances wear resistance while the substrate maintains fracture toughness; this combination extends tool life under fluctuating loads. For manufacturers seeking consistent results across mixed batches of workpieces, this grade reduces the frequency of insert changes and supports a higher overall throughput with stable surface quality. Secure mounting and straightforward system integration Compatibility with the selected holder depends on geometry, relief angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole with a single-side countersink (40°–60°) to ensure reliable screw clamping and correct seat positioning. As part of a standard ISO insert system, it integrates with corresponding external holders, shims and clamping kits, allowing rapid replacement and minimal set-up time. The single-sided chipbreaker is optimised for common turning tasks and aids predictable swarf control. Contact Metav Werkzeuge for tailored advice on holder compatibility, batch supply and application-specific recommendations; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss Tungaloy SH725 inserts and availability Technical data Article number: 6737005 SKU: 6737005-Tungaloy Manufacturer SKU: TUN6737005 Facts Thickness: 3.97 mm Corner radius: 0.2 mm Included angle: 80° Relief angle: 7° Size designation: 09 Special features Rhombic plate form Coated cemented carbide grade SH725 Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO-compliant turning insert Intended application: turning FAQ What machining operations is this insert suitable for? This insert is intended for external and internal turning; the SH725 grade and rhombic geometry suit a range of medium to light turning tasks. How does the SH725 grade affect tool life? The SH725 coated cemented carbide combines toughness and wear resistance; the grade enhances cutting-edge stability and typically yields longer life under variable engagement. Which holders are compatible with this insert? Holder compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; the insert’s ISO geometry and cylindrical hole with countersink support standard clamping systems. Can the insert be used for finishing operations? With a 0.2 mm corner radius and a stable cutting edge, the insert is suitable for achieving good surface finishes in turning where moderate material removal rates are required. What is the manufacturer article number and SKU? The manufacturer article number is 6737005 and the SKU is 6737005-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 SH725 Wendeplatten - Tungaloy
Take advantage of a tough, coated carbide grade and precise geometry to secure consistent chip control and long service life in general turning operations; order genuine inserts through Metav Werkzeuge or request tailored application advice from our sales engineers. CCGT 09T302 SH725 indexable turning insert by Tungaloy — rhombic profile, coated carbide for turning CCGT09T302 SH725 Tungaloy‑Wendeplatte — an ISO‑format rhombic insert optimised for external and internal turning, offering a 0.2 mm corner radius and a robust SH725 coating grade for variable engagement conditions ISO‑standard rhombic insert CCGT09 size Coated carbide grade SH725 Suitable for external and internal turning Cylindrical hole plus 40°–60° countersink Reliable cutting performance through proven coating and substrate The combination of a coated carbide substrate and the SH725 grade delivers a balance of toughness and edge stability that suits mixed turning tasks and interrupted cuts. The hard coating increases wear resistance while the tough substrate reduces chipping risk, which results in longer effective tool life and fewer insert changes. For production environments where machine uptime matters, this geometry supports steady output and predictable tool‑change intervals. Geometry that controls chips and surface finish A 0.2 mm corner radius and a 7° relief angle provide a controlled contact zone between tool and workpiece, improving surface finish without sacrificing edge strength. The rhombic profile and single‑sided chipbreaker promote reliable chip formation; when combined with appropriate feeds and speeds, the arrangement reduces built‑up edge and improves consistency on a range of steels and non‑ferrous materials. The result is fewer reworks and better first‑pass quality in component turning. Practical compatibility and selection guidance for efficient machining Designed as an ISO‑standard insert, the part fits holders matched by form, clearance angle, tolerance class, fixings, size and thickness; selection of the matching external holder or boring bar and clamping kit is decisive for stability. The insert’s 3.97 mm thickness, 09 size and the cylindrical hole with a 40°–60° countersink ensure secure fastening and repeatable seating. For smaller tool bodies or changing engagement conditions, choose this grade for its predictable edge behaviour and straightforward integration into established tool systems. Contact Metav Werkzeuge for specific machining recommendations or to source genuine Tungaloy inserts and compatible holders for reliable turning results. Technical data Article number: 6737006 Manufacturer SKU: TUN6737006 Dealer SKU: 6737006-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: carbide Grade/coating: SH725 Facts Insert designation: CCGT09T302 Size: 09 Corner radius: 0.2 mm Relief angle: 7° Thickness: 3.97 mm Included angle: 80° Countersink angle: 40°–60° Special features Rhombic plate form Single‑sided chipbreaker Cylindrical hole with one‑sided countersink ISO‑standard compatibility with holders Suited to variable engagement and small tool assemblies Intended application: turning FAQ What materials can this insert machine effectively? The CCGT09T302 SH725 insert is a coated carbide design that performs well on a broad range of materials; the SH725 grade is formulated for toughness and edge stability, making it suitable for many steels and mixed‑condition turning. How does the 0.2 mm corner radius affect cutting results? A 0.2 mm radius balances edge strength and finish: it helps achieve a finer surface without overly concentrating cutting forces, which assists in maintaining tool life for the Tungaloy indexable turning insert. Is the insert compatible with standard ISO holders? Yes — the CCGT09T302 conforms to ISO plate dimensions; compatibility depends on matching form, clearance angle, tolerance class, fastening and thickness with the external holder or boring bar. What does the hole style mean for clamping security? The cylindrical hole with a single‑sided 40°–60° countersink provides reliable seating and repeatable clamping, improving stability and concentricity when used with the correct screw and clamp set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 SH725 Wendeplatten - Tungaloy
Combining a coated cemented carbide SH725 grade with a precise 0.2 mm corner radius and ISO‑standard form, this insert delivers consistent chip control and long tool life for turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CCGT 09T302 SH725 indexable turning insert by Tungaloy — for precision turning CCGT 09T302 SH725 is an ISO‑standardised rhombic indexable insert designed for external and internal turning where stable cutting edges and reliable chip formation are required ISO‑standardised rhombic insert Coated cemented carbide SH725 One‑sided chipbreaker for controlled chips 0.2 mm corner radius, 7° relief Consistent machining performance with SH725 grade The SH725 coating is a coated cemented carbide grade developed for toughness and edge stability, making it suitable where cutting conditions change or where smaller‑sized inserts are used. The composition provides a balance between wear resistance and fracture toughness, which results in reduced flank wear and fewer unexpected edge failures. In practical terms, this means longer in‑machine life and fewer insert changes, supporting productive turning operations and predictable process windows. Geometry that simplifies setup and improves surface finish The rhombic geometry combined with a 0.2 mm corner radius and a 7° relief angle offers a compromise between robust edge strength and the ability to produce fine surface finishes. The rhombic form is compatible with many standard holders; compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness. A small corner radius reduces cutting forces for finishing passes, while the clearance angle prevents rubbing and helps maintain dimensional accuracy. Secure clamping and easy replacement reduce downtime The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) to fit common clamping systems and replacement screws. The 3.97 mm thickness and the ISO designation ensure repeatable seating and orientation in the pocket, which aids in achieving consistent cutting geometry after each change. Clear mechanical interface design lowers setup time and reduces the risk of clamping‑related runout, supporting stable turning sequences and higher overall equipment effectiveness. Application range and chip control explained Designed specifically for turning, the insert performs well in both external and internal operations when paired with a matching chipbreaker and insert grade suited to the workpiece material. The product features a one‑sided chipbreaker that promotes controlled chip segmentation, improving evacuation and reducing the chance of workpiece or tool damage. Select the chipbreaker and the SH725 grade according to the substrate and process stability to obtain the best combination of tool life and surface quality. For reliable, productive turning with Tungaloy’s SH725 technology, contact Metav Werkzeuge for immediate availability and application recommendations — Metav Werkzeuge can advise on holder selection and process setup to match the CCGT 09T302 SH725 insert to specific machining needs. Technical data Article number: 6737243 Manufacturer SKU: TUN6737243 Our SKU: 6737243-Tungaloy Model series: ISO turning indexable inserts Designation: CCGT09T302 Full name: CCGT09T302 SH725 Tungaloy indexable insert Facts Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Relief/clearance angle: 7° Included angle: 80° Special features Material/coating: coated cemented carbide SH725 Shape: rhombic Chipbreaker: one‑sided Hole style: cylindrical hole + single‑side countersink (40°–60°) Application: turning (external and internal) ISO‑standardised insert CCGT09T302 FAQ Is this insert suitable for both external and internal turning? The CCGT 09T302 SH725 Tungaloy indexable insert is designed for both external and internal turning when used with a compatible holder and the correct chipbreaker for the workpiece material. What materials can be machined with this SH725 grade? The SH725 coated cemented carbide grade is intended for a broad material range and offers toughness for variable cutting conditions; selection should be matched to the substrate and process stability. How does the 0.2 mm corner radius affect machining? A 0.2 mm corner radius provides improved edge strength compared with a sharp corner while still allowing fine surface finishes during finishing and semi‑finishing passes. What clamping features must the holder provide for correct seating? The holder must match the insert form, clearance angle, tolerance class, fastening method, size and thickness; the insert’s cylindrical hole with single‑side countersink (40°–60°) requires corresponding screw and seating provisions. Can the insert be used in automated tool change systems? Yes, the ISO‑standardised dimensions and the repeatable seating offered by the 3.97 mm thickness and ISO designation support use in systems with standard indexable insert change procedures. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 09T302 SH725 Wendeplatten - Tungaloy
High toughness and a stable cutting edge from the SH725 coated carbide grade combine with ISO‑standard dimensions to deliver consistent turning performance and straightforward toolholder compatibility; order the CCGT09T302 SH725 Tungaloy insert directly via Metav Werkzeuge or ask our consultants for application guidance. CCGT09T302 SH725 Tungaloy turning insert — coated carbide, 0.2 mm corner radius A CCGT09T302 SH725 ISO‑standard rhombic insert for external and internal turning, designed for reliable chip control and repeatable performance in variable engagement conditions. ISO‑standard rhombic insert CCGT09T302 SH725 coated carbide for tough cutting edges 0.2 mm corner radius for precise finishing Cylindrical hole with single‑side countersink Productive turning with a stable cutting edge The SH725 grade is a coated carbide formulation aimed at delivering a tough, edge‑stable performance in turning operations, particularly where tool sizes are small or engagement conditions vary. The single‑sided chipbreaker promotes controlled chip formation which reduces the risk of irregular chips and improves process reliability. With a 0.2 mm corner radius the insert supports fine finishing passes while the rhombic form and robust geometry maintain strength during heavier cuts, resulting in predictable surface quality and longer intervals between index changes. Reduced set‑up time thanks to ISO compatibility This item follows ISO dimensions for turning inserts, so compatibility is determined by form, 7° clearance, tolerance class, fastening method, size and thickness. The standardised format simplifies holder selection and reduces setup errors, helping to shorten machine downtime. The insert's 3.97 mm thickness and the cylindrical hole with a single‑side countersink (40°–60°) ensure secure clamping and repeatable seating in the pocket, which supports process stability across batch runs and tool changes. Versatile grade for a range of turning tasks Designed for both external and internal turning, the insert’s combination of coated carbide and a dedicated chipbreaker makes it suitable for mixed‑material production environments where stable chip formation and consistent tool life are priorities. The insert performs well when matched with a holder appropriate for the 80° cutting geometry and the 09 size, enabling productive machining of components that require a balance of durability and fine edge control. Selecting the correct chipbreaker and grade for the workpiece material and machining stability will maximise cost‑effectiveness and surface finish. Contact Metav Werkzeuge today for tailored application advice and to order the Tungaloy CCGT09T302 SH725 indexable insert — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737132 Manufacturer SKU: TUN6737132 SKU: 6737132-Tungaloy Model series: ISO turning indexable inserts Material: carbide Grade: SH725 Insert designation: CCGT09T302 Facts Corner radius: 0.2 mm Thickness: 3.97 mm Clearance angle: 7° Cutting angle: 80° Size: 09 Special features Rhombic plate form Cylindrical hole + single‑side countersink (40°–60°) One‑sided chipbreaker Intended application: turning FAQ What materials is this insert suitable for? The CCGT09T302 SH725 Tungaloy insert is a coated carbide grade formulated for broad applicability; choose the appropriate chipbreaker and cutting data according to the workpiece material and stability of the setup. Is the insert compatible with standard ISO toolholders? Yes, the insert follows ISO dimensions and its compatibility depends on holder form, clearance angle, tolerance class, fastening and size — the ISO‑standard format simplifies holder selection. What is the corner radius and what does it influence? The corner radius is 0.2 mm; a smaller radius like this improves finishing capability and reduces cutting forces for fine surface requirements. How is the insert secured in the holder? This insert features a cylindrical hole with a single‑side countersink (40°–60°); that geometry enables positive seating and secure clamping when used with the correct screw and clamping parts. Can the same grade be used for internal and external turning? Yes, the SH725 grade and the rhombic geometry allow use in both external and internal turning; toolpath planning and holder choice should reflect access and engagement conditions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 09T302 SH730 Wendeplatten - Tungaloy
Benefit from the combination of a tough, SH730 coated carbide grade and a compact rhombic geometry that ensures stable cutting edges under variable engagement; this supports consistent cycle times and predictable insert life. Order the insert directly via Metav Werkzeuge or request individual application advice from our consultants. CCGT09T302 SH730 Tungaloy indexable insert for Turning, rhombic 80°, 0.2 mm radius CCGT09T302 SH730 is an ISO-standard indexable turning insert designed for general turning where edge stability and compatibility with ISO toolholders are essential. ISO rhombic insert, 80° cutting face SH730 coated carbide, edge-stable grade Cylindrical hole with 40°–60° countersink Consistent cutting performance with a tough coated grade The combination of a coated carbide substrate and the SH730 grade provides a balance between toughness and wear resistance, developed for turning tasks where engagement can vary. The corner radius 0.2 mm helps to reduce tool pressure peaks while maintaining a reproducible cutting edge, and the rhombic geometry with an 80° cutting face gives favourable chip flow and accessibility for external and internal turning operations. Compatibility is assured by the ISO standard, which simplifies holder selection and reduces setup time. Geometry and chip control that reduce downtime A one-sided chipbreaker and the insert’s hole design — a cylindrical hole with a one-sided countersink (40°–60°) — support secure clamping and controlled chip formation. The relief angle 7° and plate thickness 3.97 mm ensure mechanical stability on small toolholders and during interrupted cuts. Together, these features lower the risk of unexpected edge failure and contribute to more predictable tool-change intervals, making the toolholder system easier to manage in series production. System guidance for rapid selection and safe integration As part of an ISO insert system, selection depends on form, relief angle, tolerance class, fastening method, size and thickness of the insert; matching the SH730 grade and the one-sided chipbreaker to the workpiece material and machining parameters optimises productivity. The insert is suited to setups requiring reliable edge integrity on compact applications and where varying depths of cut can occur. For multi-shift operations, the predictable wear behaviour supports process stability and reduces scrap rates. Contact Metav Werkzeuge for tailored cutting data, availability and application-specific recommendations on the Tungaloy CCGT09T302 SH730 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical data Article number: 6854007 SKU: 6854007-Tungaloy Manufacturer SKU: TUN6854007 Model series: ISO turning indexable inserts Material: Carbide Facts Corner radius: 0.2 mm Clearance angle (relief): 7° Cutting face angle: 80° Thickness: 3.97 mm Insert size: 09 Special features Rhombic plate geometry Cylindrical hole + one-sided countersink (40°–60°) One-sided chipbreaker Coated carbide, grade SH730 ISO-standardised turning insert Compatibility depends on form, relief, tolerance, fastening, size, thickness FAQ Which turning tasks are best suited to this insert? The CCGT09T302 SH730 insert is designed for external and internal turning where a compact rhombic shape and stable cutting edge are required; it performs well in operations with variable engagement. How does the SH730 grade affect performance? SH730 is a coated carbide grade offering enhanced toughness and edge stability, making the insert suitable for smaller tools and changing engagement conditions without excessive chipping. What does the insert designation mean (CCGT09T302)? The designation identifies a rhombic ISO insert with size 09, specific geometry and a 0.2 mm corner radius; the full code corresponds to the standard ISO form and dimensions for easy holder matching. Are there special clamping or holder requirements? Secure clamping is recommended due to the insert’s compact thickness; the cylindrical hole with a 40°–60° countersink ensures reliable seating in compatible ISO holders and reduces rotation risk Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 TH10 Wendeplatten - Tungaloy
Take advantage of the insert’s combination of ISO compatibility, a sharp TH10 uncoated carbide grade and a low 0.2 mm corner radius to secure consistent surface quality and low cutting forces in turning operations; order directly via Metav Werkzeuge or request application advice from our consultants. CCGT 09T302 TH10 indexable turning insert for ISO turning — Tungaloy CCGT09T302 TH10 is an ISO‑standard indexable insert designed for general external and internal turning applications where low cutting forces and clean surface finish are required ISO rhombic insert size 09 with 80° approach TH10 uncoated carbide for low cutting forces Single‑side chipbreaker for improved surface finish 7° relief angle and cylindrical hole with countersink Consistent clamping and straightforward holder compatibility The insert is manufactured to ISO tolerances so compatibility with a matching holder is assured by geometry, relief angle, tolerance class, fastening and thickness. This standardisation reduces fixture uncertainty and enables reliable indexability across toolposts and boring bars. The rhombic form and the 80° approach angle give predictable tool overhang and contact conditions, which supports steady cutting and repeatable part quality. For shop-floor planning the insert forms part of a system consisting of an ISO insert, a suitable external holder or boring bar, a support shim or clamping set and replacement screws; this system approach simplifies procurement and setup. Low cutting forces and clean finishes with TH10 uncoated carbide The sharp TH10 grade is an uncoated carbide designed as a universal, highly economical option for non‑ferrous materials and operations benefiting from a bare cutting edge. The uncoated edge reduces thermal build‑up at low to moderate cutting speeds, delivering a combination of reduced cutting forces and a cleaner surface finish. The single‑sided chipbreaker is optimised to control swarf and produce a consistent chip form in turning, which eases chip evacuation and reduces finish corrections. Explained plainly: the grade and chipbreaker together help maintain lower spindle loads and a finer surface without resorting to coated grades for every job. Dimensioned for precise results and practical use Key geometrical data such as the 0.2 mm corner radius, 3.97 mm thickness and 7° relief angle define the cutting edge behaviour and allowed cutting parameters. The insert’s cylindrical hole with a single‑side countersink (40°–60°) secures firm clamping and repeatable seating; that stability translates into improved tool life and steady edge performance. The carbide substrate offers the hardness needed for fine finishes while the rhombic form allows multiple indexing positions, supporting economical use of each insert. For determination of process parameters and holder selection, Metav Werkzeuge can provide technical advice and checks against machine capability and workpiece material. Contact Metav Werkzeuge for selection assistance on the CCGT09T302 TH10 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and stock availability Technical Data Article number: 6801324 Manufacturer SKU: TUN6801324 SKU: 6801324-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Insert size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Approach angle: 80° Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Material: cemented carbide Grade/coating: TH10 (uncoated carbide) Chipbreaker: single‑sided Shape: rhombic Application: turning System components: insert, holder or boring bar, support shim/clamping set, replacement screws FAQ What materials is the insert suitable for? The CCGT09T302 TH10 insert is specified for non‑ferrous materials and applications where an uncoated carbide edge supports low cutting forces and clean surface finishes. How does the TH10 grade affect cutting performance? TH10 is an uncoated carbide grade that promotes lower cutting forces and reduced thermal loading at the edge, which helps achieve better surface quality in suitable turning operations. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening, size and thickness; the ISO‑standard geometry of the CCGT09T302 facilitates use with matching rhombic ISO turning holders and compatible boring bars. What is the function of the single‑sided chipbreaker? The single‑sided chipbreaker on this insert controls chip formation to produce consistent chip shapes and cleaner surfaces, aiding chip evacuation and stabilising the cutting process. How does the 0.2 mm corner radius influence results? A 0.2 mm corner radius reduces cutting edge stress while delivering a fine surface finish and good edge strength for finishing passes in turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 TH10 Wendeplatten - Tungaloy
Take advantage of the balance of low cutting forces, predictable chip control and ISO-compatible fit to keep turning operations efficient and repeatable — order directly via Metav Werkzeuge or consult our specialists for holder matching and application advice. CCGT 09T302 TH10 Tungaloy indexable turning insert for turning applications The CCGT 09T302 TH10 is an ISO-format, rhombic indexable turning insert designed for external and internal turning where an uncoated cutting edge supports low cutting forces and clean surface finishes. Rhombic ISO insert 09 format Uncoated cemented carbide TH10 grade Single-sided chipbreaker for controlled chips 0.2 mm corner radius for fine finishes Consistent surface quality with reduced cutting forces The combination of an uncoated cemented carbide edge and the TH10 grade produces a sharp cutting geometry that reduces cutting forces and helps maintain tool stability. This characteristic is particularly valuable when machining non‑ferrous materials or light alloys where minimising force prevents workpiece distortion. The modest 0.2 mm corner radius contributes to a smoother finish without compromising edge strength, so cycle times can be optimised while surface integrity is preserved. Predictable chip control and simple clamping benefits Equipped with a single‑sided chipbreaker and a cylindrical hole with a single‑side countersink, the insert provides reliable chip formation that suits interrupted cuts and varying feed rates. Compatibility with standard ISO holders is determined by form, relief angle, tolerance class, clamping and thickness, which simplifies tool changeover and reduces setup time. The 7° relief angle and rhombic profile ensure secure seating in common turning toolholders, promoting repeatability across batches. Robust geometry for productive turning The plain, uncoated cutting edge of this insert supports operations where clean contact and low build‑up are priorities. The rhombic shape and 3.97 mm plate thickness give mechanical stability during higher feed scenarios, while the 80° included angle balances cutting strength with access to features. For shops seeking a practical, economical insert that performs reliably on non‑ferrous components, this solution combines predictable wear behaviour with easy indexation to extend usable life. Application guidance and material suitability This grade is specified for applications that benefit from an uncoated, sharp edge — typically non‑ferrous materials and situations demanding low cut forces and high surface quality. Selection of chipbreaker and grade should match the workpiece material and machining stability; for harder or coated‑demanding tasks, alternative grades or coatings are recommended. The modular nature of ISO inserts allows adaptation to both external and internal turning by selecting the appropriate holder and clamping set. Contact Metav Werkzeuge today for availability and expert guidance on Tungaloy turning solutions — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the CCGT 09T302 TH10 insert and compatible holders Technical data Article number: 6801328 SKU: 6801328-Tungaloy Manufacturer SKU: TUN6801328 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Material: cemented carbide Facts Corner radius: 0.2 mm Included angle: 80° Relief angle: 7° Plate thickness: 3.97 mm Insert size: 09 Countersink angle: 40°–60° Special features Rhombic plate form Single‑sided chipbreaker Uncoated grade TH10 Cylindrical hole with single‑side countersink ISO‑standard insert for external and internal turning Compatibility determined by form, relief angle, tolerance, clamping, size and thickness FAQ Is this insert suitable for stainless steel? The TH10 uncoated grade is optimised for non‑ferrous materials and applications requiring low cutting forces; for stainless steel, a dedicated coated grade is generally recommended over the TH10 insert. What size and geometry does the insert have? The insert is an ISO 09 format, rhombic plate with an 80° included angle, 0.2 mm corner radius and 3.97 mm thickness, supplied as the CCGT 09T302 TH10 turning insert. How does chip control perform with this insert? The single‑sided chipbreaker provides controlled chip formation for stable turning operations, particularly effective when machining non‑ferrous alloys and when clean evacuation of chips is required. How is the insert fixed in the holder? The insert features a cylindrical hole with a single‑side countersink (40°–60°) and is compatible with ISO holders that match its form, relief angle, tolerance class, clamping and thickness specifications. Can the CCGT 09T302 TH10 be used for both external and internal turning? Yes, the insert is designed for external and internal turning; appropriate holder selection and stable setup are essential to achieve the stated performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, low cutting forces and a fine 0.2 mm corner radius for reliable turning performance; order the insert via Metav Werkzeuge or consult the team for application-specific advice. CCGT 09T302 TH10 Turning Insert by Tungaloy — uncoated carbide, 0.2 mm radius The CCGT09T302 TH10 Tungaloy insert is an ISO‑standard rhombic turning insert designed for low cutting forces and improved surface finish in non‑ferrous and similar applications. ISO‑standard rhombic insert Uncoated carbide grade TH10 0.2 mm corner radius for fine detail Single‑sided chipbreaker, with hole Precise cutting with low forces for better surface finish The insert is manufactured from carbide in an uncoated TH10 grade, engineered to keep cutting forces low and to produce clean surfaces when machining non‑ferrous materials and delicate workpieces. The combination of the sharp, uncoated cutting edge and the 0.2 mm corner radius reduces vibration and leaves a finer finish, which is especially beneficial for parts requiring tight tolerances or cosmetic surfaces. This translates into fewer rework cycles and a more predictable machining process, improving throughput and part quality. Reliable ISO compatibility simplifies tooling selection Built to the ISO turning insert form, compatibility with toolholders is determined by insert form, clearance angle, tolerance class, clamping style, size and thickness. The rhombic shape and the with‑hole fixing (cylindrical hole with a single‑side countersink 40°–60°) allow secure mounting in a wide range of standard holders. Clear specification of geometry—including the 7° clearance angle and overall rhomboid form—means straightforward replacement and consistent seating, which reduces setup time and the risk of incorrect clamping. Practical advantages for productive turning operations The single‑sided chipbreaker geometry is tuned to aid chip control while keeping cutting forces low; this supports stable chip evacuation and safer, more efficient turning cycles. Using the TH10 uncoated grade helps to maintain a sharp edge where low cutting resistance is required, making the insert suitable for medium‑feed finishing or light roughing in materials where a coated grade is unnecessary. A well‑matched holder, shim and replacement screws complete the system and ensure repeatable results in batch production. Geometry and handling that support fine features and versatility Key dimensions—size 09, a thickness of 3.97 mm and the compact 0.2 mm corner radius—make the insert suitable for fine profiling and detail work as well as general external and internal turning. The insert’s 80° principal cutting angle and the rhomboid shape provide versatility for a range of tool orientations while maintaining accessibility in constrained setups. Choosing the appropriate chipbreaker and grade for the workpiece material yields the best balance between surface quality and tool life. Contact Metav Werkzeuge for availability of the Tungaloy CCGT09T302 TH10 turning inserts and for tailored application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 for specific recommendations Technical Data Article number: 6801332 Manufacturer SKU: TUN6801332 Item SKU: 6801332-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core specifications Size: 09 ISO designation: 09T302 Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Principal angle: 80° Features & compatibility Rhomboid insert form (CCGT) Uncoated carbide, grade TH10 Single-sided chipbreaker With hole: cylindrical hole + one‑side countersink (40°–60°) Application: Turning (external and internal) Compatibility depends on holder form, clearance angle, tolerance, clamping, size and thickness FAQ What materials is this insert suited for? The Tungaloy CCGT09T302 TH10 insert is designed primarily for non‑ferrous materials and applications where an uncoated carbide edge supports low cutting forces and clean surface finishes. How does the TH10 grade affect performance? The TH10 uncoated grade offers a sharp, low‑friction cutting edge that reduces cutting forces and helps achieve finer surface quality when compared with heavier, coated grades in similar applications. What mounting features does the insert have? The insert features a cylindrical hole with a one‑side countersink (40°–60°) for secure clamping and is compatible with ISO‑standard holders that match the form, tolerance class and thickness. Can this insert be used for internal turning? Yes; the rhomboid form and compact 0.2 mm corner radius make the insert suitable for both external and internal turning tasks when combined with a suitable holder and setup. Which parameters should be checked when selecting a holder? Verify holder compatibility for form, clearance angle, tolerance class, clamping method, insert size and thickness to ensure correct seating and secure fixation for the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com