CCGT 09T308 NS9530 Wendeplatten - Tungaloy
Precision finishing and low cutting forces from the NS9530 cermet grade deliver superior surface integrity and consistent component tolerances; combined with ISO‑standard geometry and a 0.8 mm corner radius this ensures stable, repeatable clamping for turning operations. Order the CCGT09T308 directly via Metav Werkzeuge or ask our consultants for application-specific guidance. CCGT09T308 NS9530 Tungaloy indexable insert for turning — uncoated cermet, 0.8 mm radius CCGT09T308 is an ISO‑standard rhombic indexable insert engineered for finishing operations in turning, offering a sharp cutting edge and a geometry optimised for continuous cuts and fine surface finishes ISO‑normed rhombic turning insert 09T308 Uncoated cermet grade NS9530 for finishing 0.8 mm corner radius for fine surface finish Cylindrical hole with single‑side countersink High‑precision finishing with lower cutting forces The combination of the NS9530 cermet grade and the rhombic geometry provides a sharp cutting edge that reduces cutting forces and improves surface quality during finishing passes. The small 0.8 mm corner radius permits fine detail and tight tolerance control while the 7° clearance contributes to a stable shear zone and reduced rubbing. For manufacturers seeking consistent, high‑quality turned surfaces, this insert reduces the need for subsequent finishing operations and supports efficient cycle times. Reliable fitment and repeatable clamping for productivity As an ISO‑standard indexable insert, compatibility with holders is determined by shape, clearance angle, tolerance class, fastening, size and thickness; this ensures predictable positioning and straightforward integration into existing tooling systems. The cylindrical hole with single‑side countersink (40°–60°) provides secure location and positive clamping, which translates to repeatable component accuracy and fewer scrap parts. Choosing the correct holder and torque for the clamping screw completes a system that is reliable under continuous turning. Application guidance and process benefits for steel finishing This grade is a dedicated finishing sort for steel: it is designed for continuous cuts and small depths of cut where a superior surface finish is the priority. The single‑sided chipbreaker supports controlled chip flow for stable machining of steels under typical finishing feeds. In practice, that means fewer passes to achieve the required Ra value, predictable tool life for planning, and improved process economy. For engineers evaluating tooling options, this insert is a measured choice where surface integrity and dimensional consistency matter. For precision finishing with Tungaloy’s NS9530 grade, contact Metav Werkzeuge for tailored advice and rapid supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997914 Manufacturer SKU: TUN6997914 SKU: 6997914-Tungaloy Model series: ISO‑Drehwendeschneidplatten ISO designation: CCGT09T308 Facts Corner radius: 0.8 mm Plate thickness: 3.97 mm Plate size: 09 Clearance angle: 7° Included angle: 80° Hole style: Cylindrical hole + single‑side countersink (40°–60°) Special features Grade: NS9530 (uncoated cermet) Plate form: Rhombic Chipbreaker: Single‑sided Application: Turning (finishing steel) Compatibility: ISO‑standard insert geometry FAQ What steels is this insert suitable for? The CCGT09T308 NS9530 Tungaloy insert is optimised as a finishing grade for steels, offering a sharp edge and low cutting forces suited to continuous finishing cuts. How does the NS9530 cermet grade affect surface finish? NS9530 is designed for high surface quality: the cermet composition and sharp cutting edge of the insert produce finer finishes and reduced need for secondary operations. Which holders fit this insert? Fitment depends on ISO‑standard geometry: holders matching the rhombic form, size 09, thickness 3.97 mm, and the 7° clearance will be compatible; ensure correct tolerance class and clamping method. What is the purpose of the countersunk hole? The cylindrical hole with a single‑side countersink provides secure location and positive clamp engagement, improving repeatability and reducing assembly variability during tool changes. Is this insert suitable for interrupted cuts? The CCGT09T308 is primarily a finishing grade optimised for continuous cuts; for heavy interrupted cutting, a more robust grade or chipbreaker may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T308 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, low cutting forces and secure clamping: the insert delivers an excellent surface quality on steels, stable performance in continuous cuts and reliable seat retention via its cylindrical hole and countersink; order the CCGT09T308 NS9530 indexable insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT09T308 NS9530 Tungaloy indexable turning insert — rhombic geometry, uncoated cermet for finishing CCGT09T308 NS9530 is an ISO-format rhombic turning insert designed for finishing operations on steel, offering a fine edge for continuous cuts and small depth-of-cut applications ISO rhombic geometry for versatile turning Uncoated cermet grade NS9530 for fine finishes 0.8 mm corner radius for smooth profiles Cylindrical hole with countersink for secure clamping Achieve consistent finishes with low cutting effort The combination of the NS9530 grade and the uncoated cermet construction ensures low cutting forces and a high surface finish when turning steel. As a finishing-grade insert, it is optimised for continuous cuts and small depths of cut, which reduces the risk of built-up edge and minimises secondary operations. The relatively sharp cutting edge of this grade promotes fine surface texture, while the 0.8 mm corner radius provides a balance between edge strength and profile accuracy for demanding production runs. Secure mounting and ISO compatibility for predictable results Manufactured as an ISO turning insert, compatibility with toolholders is governed by the insert’s shape, clearance angle, tolerance class, fastening method, size and thickness. The cylindrical hole with one-sided countersink (40°–60°) gives a reproducible seating and reliable clamping torque, reducing vibration and improving part-to-part consistency. The insert’s rhombic form and standardised dimensions allow straightforward integration into existing holder systems, supporting predictable tool life and repeatable process windows. Practical application and material suitability Intended for turning applications, this insert performs best in finishing steel components where surface quality is decisive. The single-sided chipbreaker assists chip control during light cuts, and the moderate 7° clearance angle helps maintain a sharp geometry while protecting the cutting edge during interrupted or marginally stable cuts. With a plate thickness of 3.97 mm and the standard ISO size designation, the insert is easy to specify for production setups that require consistent interchangeability and efficient tool management. Contact Metav Werkzeuge today to discuss suitability for specific turning tasks or to request machining recommendations for the CCGT09T308 NS9530 insert Technical Data Article number: 6997909 SKU: 6997909-Tungaloy Manufacturer SKU: TUN6997909 Model series: ISO indexable turning inserts Core specifications Corner radius: 0.8 mm Clearance angle: 7° Thickness: 3.97 mm Insert size: 09 Insert angle: 80° Design and features Shape: rhombic Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Grade: NS9530 uncoated cermet Material: carbide Application: turning (external and internal), finishing, continuous cuts FAQ What materials is this insert suitable for? The CCGT09T308 NS9530 insert is formulated as a finishing grade for steel; the NS9530 uncoated cermet provides low cutting forces and a fine surface on steel components. How is compatibility with toolholders ensured? Compatibility depends on geometry factors — form, clearance angle, tolerance class, fastening, size and thickness — and the insert’s ISO format makes matching to standard holders straightforward. Does the insert provide reliable clamping? Yes; the cylindrical hole with a one-sided countersink (40°–60°) on the CCGT09T308 ensures consistent seating and secure clamping for stable machining. Which cutting conditions suit this grade best? The NS9530 uncoated cermet grade excels in finishing conditions with continuous cuts and small depths of cut where surface quality and low cutting forces are priorities. Can this insert be used for internal turning as well as external turning? The insert is suitable for both external and internal turning applications when used with the appropriate holder geometry and stability for the specific setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T308 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade insert that delivers low cutting forces and an excellent surface finish in continuous turning operations; the ISO compatibility and defined geometry ensure secure clamping and reliable repeatability — order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CCGT 09T308 NS9530 – ISO turning insert for finishing by Tungaloy The CCGT09T308 NS9530 is an ISO-standard rhombic indexable insert for turning, optimised for finishing cuts on steel with a sharp cutting edge and low cutting forces Finishing-grade uncoated cermet Sharp cutting edge for fine surface finish 7° clearance angle for low cutting forces ISO rhombic form 09 with 0.8 mm corner radius Achieve finer surface quality with reduced cutting forces The NS9530 grade is an uncoated cermet developed for finishing operations on steel, offering a consistently sharp edge and low cutting forces. These characteristics make the insert particularly effective for continuous cuts and small depths of cut, where chatter and built-up edge must be avoided. The reduced cutting forces translate directly into improved workpiece geometry and an easier path to target tolerances, while the material formulation supports a superior surface finish on turned components. Secure mounting and predictable compatibility for production Compatibility with toolholders is defined by form, clearance angle, tolerance class, mounting method, size and thickness; this ISO-design insert ensures predictable integration into standard turning systems. The rhombic form and central hole with a cylindrical profile plus a single-sided countersink (40°–60°) permit secure clamping and straightforward replacement during production. The defined 80° insert geometry and the 7° clearance angle help maintain consistent chip flow and stable cutting conditions across repeated index changes. Handling, geometry and recommended use for optimised throughput With a corner radius of 0.8 mm and a plate thickness of 3.97 mm, the insert balances edge strength and the ability to produce fine finishes at small feeds. The insert’s robust grade supports continuous finishing passes in steel where low cutting forces and high-quality surfaces are priorities. Its ISO designation and rhombic shape simplify tooling decisions: select a matching external holder or boring bar that adheres to the ISO outline and tolerance class to achieve repeatable results and minimise setup time. For precision finishing with the Tungaloy CCGT 09T308 NS9530, request specific application guidance from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997908 SKU: 6997908-Tungaloy Manufacturer SKU: TUN6997908 Model series: ISO-Drehwendeschneidplatten Label: CCGT09T308 NS9530 Tungaloy-Wendeplatte Dimensions & core data Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Insert angle: 80° Size: 09 Materials & features Grade: NS9530 Cutting material: uncoated cermet Substrate material: Hartmetall Shape: rhombic Hole: cylindrical hole with single-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning FAQ Is this insert suitable for finishing steel? The insert is a finishing-grade NS9530 uncoated cermet designed for finishing on steel; it performs best in continuous cuts and small depth-of-cut scenarios. How is compatibility with a toolholder determined? Compatibility depends on form, clearance angle, tolerance class, mounting, size and thickness; the ISO designation simplifies selection of a matching holder. What are the key geometry values to consider for stable cutting? Important values include the 0.8 mm corner radius, 3.97 mm thickness and 7° clearance angle — these influence edge strength, rigidity and chip control. Can this insert be used for heavy roughing? This grade and geometry are optimised for finishing rather than heavy roughing; for heavy material removal a different grade and geometry are recommended. Which product identifiers should be quoted when ordering? Quote the designation CCGT09T308 NS9530, manufacturer article number 6997908 and SKU 6997908-Tungaloy for accurate processing Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 120402 KS05F Wendeplatten - Tungaloy
Benefit from the combination of durable KS05F carbide, precise 0.2 mm nose radius and effective AL chip control for reliable turning performance; order genuine Tungaloy inserts through Metav Werkzeuge or consult our specialists for application support. CCGT 120402 KS05F indexable insert for turning (CCGT120402-AL) by Tungaloy A CCGT120402-AL KS05F indexable insert engineered for external and internal turning, offering a balance of wear resistance and cutting-edge stability for consistent machining results ISO rhombic insert, CCGT geometry Grade KS05F for wear resistance AL chipbreaker for effective chip control 7° clearance and 80° approach angle Cylindrical hole with single-side countersink Longer tool life through a wear-resistant carbide grade The carbide grade KS05F from Tungaloy combines enhanced wear resistance with controlled toughness so that the cutting edge remains stable over extended cycles. This results in fewer indexings and replacement events, which directly reduces downtime and tooling costs in series production. The hardened carbide substrate also supports repeatable cutting behaviour across batches, delivering consistent part quality even under varying operating conditions. Secure seating and standardised fit for quick set-up Because these inserts conform to ISO standards, compatibility with a suitable holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic plate form and cylindrical hole with single-side countersink ensure positive seating and simple clamping in standard CCGT toolholders. The 4.76 mm plate thickness and 12 mm inscribed size provide mechanical stability during turning, while the modest 0.2 mm nose radius supports fine surface finishes without excessive cutting forces. Controlled chips and stable cutting for predictable results The dedicated AL chipbreaker promotes effective chip formation and evacuation in many turning tasks, which helps to maintain a steady material flow and reduce the risk of built-up edge. Combined with the 7° clearance and 80° approach angle, the geometry supports smooth engagement and lowers vibration potential, improving surface quality on workpieces. For shops requiring dependable, repeatable performance in both external and internal turning, this solution delivers process reliability and lower rework rates. For application advice, availability or to order genuine Tungaloy indexable inserts such as the CCGT120402-AL KS05F, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss the optimal grade and holder combination for the task Technical data Article number: 6843407 SKU: 6843407-Tungaloy Manufacturer SKU: TUN6843407 Facts Thickness: 4.76 mm Inscribed circle / size: 12 mm Tip radius: 0.2 mm Clearance angle: 7° Approach angle: 80° Special features Carbide grade KS05F (Tungaloy) Chipbreaker: AL Rhombic plate form (CCGT geometry) Cylindrical hole with single-side countersink (40°–60°) ISO turning indexable insert series Intended for external and internal turning FAQ What materials is this insert suited for? The CCGT120402-AL KS05F insert is a carbide grade optimised for a broad range of turning applications; select the chipbreaker and grade according to the workpiece material and machining strategy. How does the AL chipbreaker affect machining? The AL chipbreaker on the CCGT120402-AL promotes controlled chip formation and evacuation, supporting stable cutting conditions and consistent surface quality during turning operations. Which holders are compatible with this insert? Compatibility depends on insert form, clearance, tolerance class, fastening method, size and thickness; the ISO rhombic CCGT geometry is compatible with standard CCGT toolholders that accept the specified dimensions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 120404 KS05F Wendeplatten - Tungaloy
Take advantage of the combination of consistent cutting performance, KS05F carbide toughness and a secure mounting design for reliable turning results; order directly via Metav Werkzeuge or consult the specialists for application advice. CCGT 120404 KS05F indexable turning insert — 0.4 mm radius, AL chipbreaker — Tungaloy CCGT 120404 KS05F is an ISO indexable turning insert designed for general turning applications, providing a balance of wear resistance and edge stability for external and internal turning tasks. ISO‑standard rhombic insert KS05F Tungaloy carbide grade 0.4 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Predictable productivity from grade and geometry The combination of the KS05F carbide grade and the AL chipbreaker produces a durable cutting edge that balances wear resistance with enough toughness to avoid premature chipping. The insert’s rhombic geometry and ISO compliance ensure compatibility with a wide range of standard toolholders; compatibility depends on form, 7° clearance, tolerance class, fastening and plate thickness. These engineered traits reduce downtime by extending tool life and delivering consistent surface quality, which improves throughput and lowers overall component cost per part. Accurate finishing and secure clamping for repeatable results A 0.4 mm corner radius provides controlled engagement for fine finishing passes, while the 4.76 mm plate thickness and the central cylindrical hole with one-sided countersink (40°–60°) ensure axial and rotational stability when mounted. The lead angle of 80° suits a broad range of turning orientations and, together with the 7° relief, minimises rubbing and heat build-up. For shops requiring repeatable tolerances and dependable surface integrity, these geometrical features translate directly into fewer rework cycles and improved process reliability. Practical application guidance for machining operations Intended for turning, this insert performs in both external and internal turning operations when combined with a suitable holder, clamping set and fixing screw. Select the AL chipbreaker and the KS05F grade according to workpiece material, cutting parameters and machine rigidity to achieve the best balance of chip control and edge life. The modular system concept — an ISO insert seated in a matched external holder or boring bar with the correct backing and clamp — simplifies tool management and replacement, enabling quick index changes and predictable production planning. Contact Metav Werkzeuge for tailored recommendations and to request the CCGT 120404 KS05F Tungaloy indexable insert: info@metav-werkzeuge.com or +49 2822 7131930 for prompt, application‑specific advice Technical data Article number: 6843408 SKU: 6843408-Tungaloy Manufacturer SKU: TUN6843408 Name: CCGT120404-AL KS05F Tungaloy indexable insert Material: carbide Facts Corner radius: 0.4 mm Clearance (relief) angle: 7° Lead/approach angle: 80° Plate thickness: 4.76 mm Plate size: 12 mm Special features Rhombic plate form AL chipbreaker Cylindrical hole + one-sided countersink (40°–60°) ISO turning insert series compatibility Carbide grade KS05F by Tungaloy FAQ What turning operations is this insert intended for? The CCGT 120404 KS05F insert is designed for external and internal turning operations; chipbreaker and grade selection should be matched to the workpiece and operation to achieve optimal performance. How is the insert secured in the toolholder? Retention is via the central cylindrical hole with a one‑sided countersink (40°–60°); the secure clamping combined with the 4.76 mm thickness gives reliable seating and repeatable concentricity for turning. Which features of the KS05F grade improve tool life? KS05F combines wear resistance and edge stability, providing a balance that helps maintain cutting edge integrity under mixed machining loads; the AL chipbreaker assists with consistent chip control. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO indexable plate conventions; compatibility depends on matching form, free angle, tolerance class, fastening method, size and thickness to the holder specification. What information should be provided when requesting technical advice? When contacting Metav Werkzeuge, provide workpiece material, machining operation (external/internal), holder type and preferred cutting conditions; referencing SKU 6843408-Tungaloy speeds up the recommendation process. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 120408 KS05F Wendeplatten - Tungaloy
Take advantage of a proven combination of ISO compatibility, a wear-resistant KS05F grade and a secure clamping design for reliable turning cycles; order the Tungaloy insert directly via Metav Werkzeuge or request application advice from our consultants. CCGT120408 KS05F — Indexable Turning Insert for Turning (Tungaloy) CCGT120408-AL KS05F indexable insert engineered for external and internal turning with rhombic geometry and a 0.8 mm corner radius ISO CCGT geometry, rhombic form, with 7° clearance KS05F Tungaloy grade for wear and edge stability AL chipbreaker optimised for general turning 0.8 mm corner radius for robust edge strength Accurate fit for standard toolholders and predictable mounting The ISO CCGT geometry ensures straightforward interchangeability with ISO‑compliant toolholders. Compatibility is defined by the insert form, 7° clearance, tolerance class, fastening method, plate size and thickness; this predictability reduces set‑up time and avoids trial‑and‑error adjustments. For production environments where quick insert changes and repeatable clamping are essential, the standardised shape guarantees that component tolerances and holder specifications match reliably, maintaining process stability across shifts and machines. Balanced substrate for extended life and consistent surface quality The KS05F grade from Tungaloy is formulated to combine wear resistance with sufficient toughness, providing a balanced performance for a variety of turning tasks. Manufactured on a cemented carbide substrate, the grade supports stable cutting edges and prolonged tool life, which translates into longer uninterrupted runtimes and fewer changeovers. That balance helps to conserve tooling costs while delivering consistent surface finish and dimensional accuracy during series production. Optimised chip control and secure clamping for stable machining Equipped with an AL chipbreaker, this insert promotes controlled chip formation in typical turning operations and helps to maintain low cutting forces where stability is limited. The 0.8 mm corner radius increases edge strength for interrupted cuts and roughing passes without sacrificing finish capability in finishing cuts. A cylindrical hole with a one‑sided countersink (40°–60°) provides dependable seating and repeatable clamping; the plate thickness of 4.76 mm contributes to rigidity and vibration resistance during heavier cuts. System composition and recommended selection approach The product functions as part of an assembly comprising the ISO insert, a compatible external holder or boring bar, a shim/clamping set and replacement screws. For different workpiece materials and machining strategies, pairing the AL chipbreaker and KS05F grade with the appropriate holder geometry and machine stability is advisable. Selection should consider workpiece material, tool overhang and cutting parameters to achieve the best trade‑off between tool life and productivity. Application advice and technical data are available through Metav Werkzeuge for specification alignment. For availability checks or application guidance on the Tungaloy CCGT120408 KS05F indexable insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6843409 Manufacturer SKU: TUN6843409 SKU: 6843409-Tungaloy Model designation: CCGT120408-AL Product name: CCGT120408-AL KS05F Tungaloy insert Facts ISO designation: 120408 Corner radius: 0.8 mm Clearance angle: 7° Plate size: 12 mm Plate thickness: 4.76 mm Approach/lead angle: 80° Special features Cemented carbide substrate KS05F Tungaloy grade AL chipbreaker Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) ISO-series indexable turning plates FAQ What does the KS05F designation signify? KS05F denotes a Tungaloy carbide grade developed for turning that balances wear resistance, edge stability and toughness to provide reliable performance across typical turning tasks. Which turning operations suit this insert? The CCGT120408 KS05F insert is intended for both external and internal turning; its geometry and AL chipbreaker support a range of finishing and light to medium roughing operations depending on setup stability. How is the insert secured in the holder? The insert features a cylindrical hole with a one‑sided countersink (40°–60°) to enable secure, repeatable clamping in compatible holders and boring bars. What are the key dimensions to check for holder compatibility? Check the ISO designation (120408), plate size (12 mm), plate thickness (4.76 mm), corner radius (0.8 mm) and clearance angle (7°) to ensure proper fit and seating with the chosen toolholder. Can the CCGT120408 KS05F handle interrupted cuts? The 0.8 mm corner radius improves edge strength, making the insert suitable for operations that include occasional interruptions, while the KS05F grade supports edge stability during variable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGW 060200 DX140 Wendeplatten - Tungaloy
Take advantage of the combination of high cutting speeds, exceptional wear resistance and ISO compatibility for efficient aluminium and non-ferrous machining; order directly via Metav Werkzeuge or consult our specialists for configuration and tooling support. CCGW060200-DIA DX140 ISO turning insert — Tungaloy, PCD grade for turning CCGW060200-DIA DX140 is an ISO-standard rhombic turning insert designed for high-speed machining of aluminium, non-ferrous metals and abrasive non-metals; suited for external and internal turning applications PCD grade DX140 for aluminium machining High cutting speeds and long tool life Rhombic 80° geometry, 7° clearance Cylindrical hole with single-side countersink Faster aluminium turning through PCD technology The use of polycrystalline diamond (PCD) in the DX140 grade enables substantially higher cutting speeds compared with conventional carbide inserts while maintaining superior edge stability. For aluminium and most non-ferrous alloys, the PCD cutting material reduces adhesion and built-up edge, which improves surface finish and extends tool life. As a result, cycle times are reduced and predictable tool-change intervals support a smoother production flow. Secure clamping and system compatibility for predictable results This insert is manufactured to ISO dimensions and its fit is determined by form, relief angle, tolerance class, fixing, size and thickness. The rhombic shape with an 80° included angle and a 7° clearance ensures stable contact in the seat and reliable chip evacuation when paired with the correct holder. The insert requires a compatible external holder or boring bar, with the full system comprising an insert, holder, shim/clamping set and replacement screws for repeatable mounting and consistent process security. Geometry and measurable data explained for straightforward selection Key geometry values are provided to aid selection: the insert is size 06 with a thickness of 2.38 mm, ISO designation 060200, and a central cylindrical hole plus a single-side countersink (40°–60°) for positive clamping. These measurable parameters determine suitability for existing toolholders and define the mechanical stability during heavy or interrupted cuts. Understanding these figures simplifies tooling choices and reduces the risk of incorrect combinations that could shorten component or tool life. Productivity benefits and economic rationale for workshops Choosing a PCD insert in DX140 offers a clear cost-benefit for series production of aluminium components: higher cutting speeds, improved surface quality and extended wear life lower the cost per part. For manufacturers seeking higher throughput and lower rework rates, the investment in a specialised PCD grade often pays off through reduced machine hours and fewer tool changes. For mixed production, selecting the correct chipbreaker and grade for the material and process stability remains essential to achieve these economic gains. Contact Metav Werkzeuge today to discuss the Tungaloy PCD DX140 insert (SKU TUN6801356) and arrange the best holder and clamping set for high-speed aluminium turning. Technical data Article number: 6801356 Manufacturer SKU: TUN6801356 Internal SKU: 6801356-Tungaloy Manufacturer: Tungaloy Designation: CCGW060200-DIA DX140 Tungaloy insert Facts ISO code: 060200 Insert size: 06 Thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Countersink: 40°–60° Special features Cutting material: polycrystalline diamond (PCD) Grade: DX140 Suitable for aluminium, non-ferrous metals and abrasive non-metals Rhombic insert form with cylindrical hole and single-side countersink ISO-standardised turning insert; system requires matching holder, shim/clamping set and screws FAQ What materials is this insert optimised for? The DX140 PCD grade is optimised for aluminium, non-ferrous metals and abrasive non-metals; the Tungaloy CCGW060200-DIA insert provides high-speed performance and long wear life on these materials. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fixing and size; the insert fits holders designed for ISO 060200 rhombic inserts and requires a matching clamping set and screws for secure mounting. How does the DX140 grade affect productivity? DX140’s PCD cutting edge enables higher cutting speeds and longer tool life, reducing cycle times and the frequency of tool changes, which improves overall productivity in series production. What are the key geometric values to check before purchase? Important values are insert size (06), thickness (2.38 mm), clearance angle (7°), ISO code (060200) and the hole/countersink specification (cylindrical hole with single-side countersink 40°–60°). Can this insert be used for internal turning as well as external turning? Yes — the insert is suitable for both external and internal turning when matched with the appropriate external or boring bar holders and ensuring sufficient stability for the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGW 060202 DX140 Wendeplatten - Tungaloy
Take advantage of high cutting speed and exceptional wear resistance for efficient machining of aluminium and non-ferrous materials, combined with precise ISO compatibility for straightforward tool system integration. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored recommendations. CCGW 060202 DX140 ISO turning insert — Tungaloy, PCD grade for aluminium machining A CCGW060202 DX140 indexable insert engineered for high-speed turning of aluminium and other non-ferrous and abrasive non-metallic materials. PCD cutting material for long tool life Rhombic shape, size 06 0.2 mm corner radius for fine finishes 7° relief angle for positive cutting Hole with cylindrical bore and one-sided countersink (40°–60°) Faster cycles and predictable tool life for aluminium components The polycrystalline diamond (PCD) cutting layer delivers high cutting speed capability and long tool life when machining aluminium and similar non-ferrous materials. The combination of a carbide substrate and a PCD cutting edge reduces flank wear and abrasion, which in turn lowers tool-change frequency and increases uptime. For production environments where cycle time and repeatability matter, this geometry supports consistent component quality and predictable tool costs over long runs. Geometry engineered for surface quality and chip control The rhombic plate form with an included angle of 80° and a 0.2 mm corner radius produces fine surface finishes while preserving edge strength. The 7° relief angle provides a positive engagement that reduces cutting forces and heat generation, helping to maintain dimensional accuracy. Although the insert is supplied without a dedicated chipbreaker, the PCD grade exhibits smooth shearing on soft, gummy alloys; selecting a matching toolholder and cutting parameters optimises chip evacuation and workpiece integrity. Substrate and grade benefits for abrasive applications The substrate material is carbide, supporting the deposition and bonding of the DX140 PCD cutting material. This arrangement gives the insert excellent resistance to abrasive inclusions often present in non-metallic workpieces and certain aluminium alloys. The DX140 grade is tailored for productive machining: it enables higher surface footage and extended edge life compared with conventional carbide grades, which translates into fewer interruptions and lower overall tooling consumption. Straightforward integration into ISO tool systems As an ISO-format turning insert, compatibility with holders depends on form, relief angle, tolerance class, fastening method, size and thickness. The insert’s size 06, thickness 2.38 mm, and the centre hole with cylindrical bore plus one-sided countersink (40°–60°) match common clamping systems, allowing easy retrofitting into existing assemblies comprising an outer holder or a boring bar plus the correct seat and clamp set. Ensure the chosen holder supports PCD tooling for optimal rigidity and cooling strategies. Practical recommendations for process setup When switching to PCD inserts like this grade, increase cutting speeds compared with carbide tooling while maintaining moderate feed to protect the edge form. Coolant strategies and toolpath planning should focus on stable clamping and efficient chip removal. The ISO designation and standardised geometry simplify spare management in production, allowing quick swaps without extensive setup changes and supporting lean inventory practices. For high-speed, long-life machining of aluminium and non-ferrous components, specify the DX140 PCD insert from Tungaloy and consult Metav Werkzeuge for availability and application guidance. Technical data Article number: 6801358 Manufacturer SKU: TUN6801358 Stock SKU: 6801358-Tungaloy Model series: ISO turning inserts Facts Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 80° Size: 06 Design and features Shape: rhombic Hole: with cylindrical bore and one-sided countersink (40°–60°) Grade: DX140 Cutting material: PCD (polycrystalline diamond) Substrate: carbide Application: turning ISO designation: CCGW060202 FAQ What materials is this insert suitable for? The DX140 grade with PCD cutting material is designed primarily for aluminium, other non-ferrous metals and abrasive non-metallic materials; it provides high cutting speed capability and extended wear resistance for these substrates. How does the 0.2 mm corner radius affect the finish? A 0.2 mm corner radius balances edge strength and surface quality, enabling finer finishes on thin-walled and delicate workpieces while maintaining sufficient robustness for continuous production. Is the insert compatible with standard ISO holders? The CCGW060202 insert follows ISO geometry; compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness. The 2.38 mm thickness and size 06 align with common clamping systems. Why choose a PCD grade like DX140 over carbide? DX140 provides superior abrasion resistance and edge life on non-ferrous and abrasive materials, allowing higher cutting speeds and reduced tool-change frequency compared with conventional carbide inserts. What is the significance of the hole with countersink? The central hole with cylindrical bore and one-sided countersink (40°–60°) ensures secure clamping and precise axial positioning in many indexable holder designs, improving repeatability during tool indexing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGW 060202 TH10 Wendeplatten - Tungaloy
Benefit from precise ISO compatibility, the sharp TH10 uncoated carbide grade and the rhombic 80° geometry for efficient turning operations. Order the CCGW060202 TH10 insert directly via Metav Werkzeuge or ask our consultants if needed. CCGW060202 TH10 ISO turning insert by Tungaloy — rhombic 80°, 0.2 mm nose A CCGW060202 TH10 indexable insert designed for ISO-compliant external and internal turning, offering low cutting forces and fine surface results. *ISO-standard rhombic insert, 80° geometry *Uncoated carbide grade TH10 for low cutting forces *0.2 mm nose radius for fine surface finishes *Cylindrical hole with single-sided countersink Reliable ISO performance for precise turning The insert is manufactured to an ISO-standard geometry, ensuring predictable seating and repeatable results in any ISO-compatible holder. The rhombic shape with an effective 80° cutting angle provides a stable cutting edge for both facing and profiling tasks. Built for routine production, this geometry supports consistent tool life and reduces the need for frequent re‑alignment, which helps maintain production flow and reduces downtime. Lower cutting forces and improved surface finish The TH10 grade is an uncoated carbide developed for applications where a sharp, clean cutting edge is preferable. Its design reduces cutting forces, particularly when machining non-ferrous materials and softer alloys, and supports smoother surface finishes at moderate feeds. The small 0.2 mm nose radius assists in producing fine surface quality while retaining dimensional control, making the insert well suited to finishing passes and delicate turning operations. System compatibility and practical setup benefits Compatibility with the toolholder is determined by form, clearance angle, tolerance class, clamping method, size and thickness; this insert integrates into the typical ISO turning system comprising the indexable plate, a compatible external holder or boring bar, and the required shim and clamp set. The insert features a cylindrical hole with a single-sided countersink (40°–60°) to match standard clamping screws and ensure secure fixation. Note that the design is supplied without a chipbreaker, so machining parameters should be chosen to match chip control requirements. Material characteristics and recommended applications Made from a solid carbide substrate and specified under the TH10 variety, the insert is particularly effective for turning tasks where a clean edge and low cutting resistance are priorities. It is intended for general turning use, both external and internal, and performs reliably when paired with appropriate feeds and speeds for the material in hand. For operations requiring aggressive chip control or heavy roughing, select cutters or grades with integrated chipbreakers and different coatings. For application advice, sample recommendations or to request a tailored quotation for the Tungaloy CCGW060202 TH10 turning insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants are available to assist. Technical data Article number: 6801357 Manufacturer SKU: TUN6801357 Metav SKU: 6801357-Tungaloy Name: CCGW060202 TH10 Tungaloy insert ISO designation: CCGW060202 Facts Angle: 80° Clearance angle: 7° Nose radius: 0.2 mm Thickness: 2.38 mm Size: 06 Special features Carbide substrate Uncoated grade TH10 Rhombic plate form With hole; cylindrical hole + single-sided countersink (40°–60°) No chipbreaker Intended application: turning ISO turning indexable insert series FAQ What holders are compatible with this insert? Compatibility is determined by the ISO form, clearance angle, tolerance class, clamping and size; the CCGW060202 TH10 insert fits ISO-standard holders sized for a 06 rhombic plate. Which materials is the TH10 grade best for? The TH10 uncoated carbide grade suits non-ferrous materials and applications where a sharp, clean cutting edge and reduced cutting forces are required. Does this insert include a chipbreaker? No, the plate is supplied without a chipbreaker; machining parameters should be adapted or an alternative grade with chip control chosen for heavy chip-forming operations. For which operations is this insert recommended? The insert is intended for both external and internal turning, especially finishing and light to medium cutting where surface quality and low forces are important. How does the 0.2 mm nose radius affect surface finish? A 0.2 mm nose radius helps achieve finer surface finishes and better dimensional accuracy during finishing passes, while requiring appropriate feed rates to avoid premature edge loading. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGW 060204 DX140 Wendeplatten - Tungaloy
Take advantage of the combination of very high cutting speeds, long tool life and ISO conformity for reliable turning processes; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. CCGW 060204 DX140 ISO turning insert — Tungaloy PCD grade for high-speed turning CCGW 060204 DX140 is an ISO-format turning insert designed for high-speed machining of aluminium, non-ferrous metals and abrasive non-metallic materials; rhombic shape with 80° cutting angle and a 0.4 mm nose radius. PCD cutting edge for high cutting speeds ISO CCGW 060204 form with 7° clearance Rhombic 80° geometry, 0.4 mm nose radius Cylindrical hole with single-side countersink 40°–60° High-speed performance with very long tool life The insert is equipped with a polycrystalline diamond (PCD) cutting layer bonded to a carbide substrate, enabling very high cutting speeds and exceptional wear resistance when turning aluminium and other non-ferrous materials. The PCD concept combines the hardness and abrasion resistance of diamond with a tough support body; this reduces flank wear and dramatically extends in-process life compared with conventional uncoated carbide grades. For production environments where cycle time and tool-change frequency directly affect output, this solution supports sustained productivity and predictable tool-cost planning. Reliable geometry and ISO compatibility for process stability Manufactured to the ISO insert form, the component offers a rhombic 80° geometry with a 0.4 mm nose radius and 7° clearance, which together deliver a balance between chip control and surface finish. The standardised outline ensures compatibility with holders that match form, clearance angle and clamping features; the insert’s cylindrical central hole with a single‑side countersink (40°–60°) supports secure fastening and repeatable seating in indexed tool bodies. This configuration reduces vibration and contributes to consistent dimensional results across batches. Application guidance and substrate considerations The DX140 grade is optimised for aluminium, Messing (brass) and abrasive non-metals, providing excellent edge stability and chip behaviour in continuous and semi‑continuous cuts. As a diamond-based grade, the cutting edge excels at producing superior surface finishes at elevated speeds but is not intended for ferrous workpieces due to rapid chemical wear; selection of the appropriate substrate and cutting parameters is essential. Where fine surface integrity and minimal burr formation are priorities, the PCD solution offers clear advantages over conventional coatings. Economic and operational benefits for production shops Using a high-performance PCD insert in suitable applications reduces tool-change frequency and downstream rework, improving overall equipment effectiveness. The standard ISO form simplifies inventory and holder selection, while the robust clamping interface minimises indexing errors. These aspects together result in lower unit costs per part and smoother production flow, particularly in high-volume turning of non-ferrous components. Contact Metav Werkzeuge for tailored application advice and ordering of the Tungaloy CCGW 060204 DX140 insert; technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6801360 SKU: 6801360-Tungaloy Manufacturer SKU: TUN6801360 Model series: ISO turning inserts Designation: CCGW060204 DX140 Facts Nose radius: 0.4 mm Cutting edge angle: 80° Clearance (relief) angle: 7° Plate thickness: 2.38 mm Plate size: 06 Special features Cutting material: polycrystalline diamond (PCD) Substrate: carbide Plate shape: rhombic Hole: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: none Typical application: turning of aluminium, non-ferrous metals and abrasive non-metals High cutting speeds and long tool life FAQ What materials is this insert suitable for? The CCGW 060204 DX140 insert is intended for aluminium, Messing and abrasive non-metallic materials; the PCD cutting edge provides excellent wear resistance on these workpiece types. Can this insert be used on steel or stainless steel? No; diamond-based edges such as DX140 are not suitable for ferrous or rostfreier Stahl workpieces due to accelerated chemical wear. How does the insert fix to a holder? The insert features a cylindrical central hole with a single-side countersink (40°–60°) to enable secure clamping in compatible ISO holders and ensure repeatable seating. Is there a chipbreaker on this grade? This variant is specified without a chipbreaker; chip control must therefore be managed via cutting parameters and holder geometry appropriate for the workpiece material. What benefits does the PCD cutting edge offer in production? The PCD edge delivers superior abrasion resistance, improved surface finish at high speeds and significantly extended tool life in non-ferrous machining applications, reducing downtime and tool costs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGW 060204 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of TH10 uncoated carbide for low cutting forces and a 0.4 mm corner radius for fine surface finish to maintain steady production quality. Order the insert directly via Metav Werkzeuge or consult the technical team for holder compatibility. CCGW 060204 TH10 indexable turning insert — rhombic 80° for turning, Tungaloy CCGW 060204 TH10 is an ISO‑standard rhombic insert designed for external and internal turning, optimised for non‑ferrous materials and applications requiring low cutting forces and clean surface finish. ISO rhombic insert, 80° included angle Uncoated cemented carbide TH10 for non‑ferrous materials 0.4 mm corner radius for improved surface finish Cylindrical hole with single‑side countersink (40°–60°) Productivity through optimised cutting geometry The combination of an 80° rhombic shape and a 7° relief angle gives a robust edge geometry that balances strength and accessibility, making this insert well suited to turning tasks where stability and form control matter. As an uncoated cemented carbide grade, TH10 provides consistently low cutting forces, which reduces tool‑holder load and helps to preserve part geometry during machining. The result is a measurable improvement in cycle stability and repeatability when machining brass, aluminium alloys and other non‑ferrous materials. Reliable mounting and system compatibility Compatibility with toolholders is determined by insert form, relief angle, tolerance class, fixation and thickness; the ISO designation ensures straightforward selection of matching external holders or boring bars. The CCGW 060204 format is supplied with a cylindrical hole plus a single‑sided countersink (40°–60°), allowing secure clamping and straightforward replacement. Using the appropriate holder and clamping set reduces runout and vibration, which directly improves edge life and surface quality in serial production. Design details that improve finish and reduce forces A 0.4 mm corner radius supports a fine surface finish without compromising edge strength, and the plate thickness of 2.38 mm contributes to stable performance under typical turning feeds. The absence of an integral chipbreaker (no chipbreaker fitted) makes the geometry particularly suitable for continuous chips encountered with softer, ductile materials; operators gain cleaner surfaces and lower cutting resistance as a consequence. These design choices translate into fewer secondary operations and a leaner production workflow. Application benefits and operational rationale Specified for turning operations, the insert supports both external and internal turning when paired with a compatible ISO holder and correct clamping. The uncoated grade encourages sharp cutting edges that reduce built‑up edge formation on non‑ferrous workpieces, improving surface finish and dimensional accuracy. For production environments requiring consistent component quality and easy tool changeover, this approach delivers predictable, efficient machining with a straightforward tool inventory. Contact Metav Werkzeuge for matching holders, technical pairing advice and ordering information for Tungaloy turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for consultancy and rapid delivery options Technical Data Article number: 6801359 Manufacturer SKU: TUN6801359 SKU: 6801359-Tungaloy Designation: CCGW060204 Name: CCGW060204 TH10 Tungaloy insert Facts Corner radius: 0.4 mm Included angle: 80° Relief (free) angle: 7° Plate thickness: 2.38 mm Size: 06 Special features Material: cemented carbide Coating: uncoated Insert form: rhombic Hole: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: none Typical application: external and internal turning Series: ISO turning inserts Grade: TH10 — sharp universal grade for non‑ferrous materials FAQ What materials is this insert suitable for? The CCGW060204 TH10 insert is designed primarily for non‑ferrous materials such as aluminium and brass; the uncoated TH10 grade supports low cutting forces and clean surface finish on these workpieces. How is the insert secured in the holder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping; system compatibility depends on matching holder geometry to the ISO form and relief angle. Is there a chipbreaker on this insert? This variant is supplied without a chipbreaker, which suits applications where continuous, ductile chips are formed and a sharp, uncoated cutting edge is preferred. What are the key geometric dimensions to check when selecting a holder? Check the rhombic form, 80° included angle, 7° relief angle, size 06 and plate thickness 2.38 mm to ensure the holder accepts the CCGW060204 geometry. Can this insert be used for finishing passes? The 0.4 mm corner radius and sharp TH10 grade make the insert appropriate for fine finishing on softer workpiece materials, yielding improved surface quality with stable cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGW 09T302 DX140 Wendeplatten - Tungaloy
The combination of the PCD DX140 grade and precise rhombic geometry provides extended tool life and the capacity for elevated cutting speeds in aluminium and other non‑ferrous materials. Available to order from Metav Werkzeuge; consultants can be contacted for application advice and availability. CCGW 09T302 DX140 Turning Insert — Turning — Tungaloy The CCGW09T302 DX140 is an ISO turning insert engineered for high‑speed external and internal turning of aluminium and other non‑ferrous and abrasive non‑metal materials. *ISO turning insert CCGW 09T302 DX140 PCD *Optimised for aluminium and non‑ferrous metals *Rhombic form 09 with 80° included angle *0.2 mm corner radius, 7° clearance, 3.97 mm thick Higher output through PCD performance The DX140 grade, based on polycrystalline diamond (PCD), is designed to deliver high cutting speeds and very long tool life when machining aluminium and similar materials. This hard cutting layer minimises flank wear and maintains edge integrity over extended cycles, which reduces the frequency of index changes and supports continuous production. For pragmatic production planning, the result is fewer interruptions and a demonstrable improvement in process yield when compared with conventional grades. Secure, standardised clamping for consistent results Produced to ISO dimensions, the insert’s compatibility with holders is determined by shape, clearance angle, tolerance class, fixing, size and thickness. The rhombic plate with an 80° included angle and a cylindrical hole with single‑side countersink (40°–60°) ensures reproducible seating and stable clamping, which in turn improves repeatability and dimensional accuracy in serial turning operations. The standardised interface simplifies inventory management across tool systems and reduces the risk of improper assembly. Geometry tailored for surface quality and edge strength A 0.2 mm corner radius combined with a 7° clearance and 3.97 mm thickness balances edge strength and surface finish. The small corner radius helps achieve fine surface quality on external and internal profiles while the plate thickness contributes to bending resistance under higher cutting forces. The absence of an integrated chipbreaker indicates application with optimised cutting parameters and attention to evacuation through suitable tooling and coolant strategies. Application guidance and system composition The cutting component is mounted on a carbide substrate and is supplied in the ISO CCGW format; the system typically comprises a matching external holder or boring bar, a shim/clamp set and replacement screws for secure attachment. The DX140 grade is particularly suitable for machining aluminium, non‑ferrous metals and abrasive non‑metallic materials where high metal removal rates and long index life are priorities. For stable results, select the chip control geometry and holder rigidity in line with workpiece stability and the chosen machining strategy. Contact Metav Werkzeuge for tailored cutting data, stock checks and advisory support on Tungaloy DX140 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6801362 SKU: 6801362-Tungaloy Manufacturer SKU: TUN6801362 Model series: ISO turning inserts Manufacturer: Tungaloy Application: Turning Core data Plate designation: CCGW09T302 Plate size: 09 Included angle: 80° Corner radius: 0.2 mm Clearance angle: 7° Plate thickness: 3.97 mm Special features Grade/coating: DX140 Cutting material: polycrystalline diamond (PCD) Substrate material: cemented carbide Plate form: rhombic Hole: with hole; cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: none (without chipbreaker) Typical use: external and internal turning; choose chipbreaker and grade according to material and stability FAQ Is this insert suitable for finishing aluminium components? The DX140 PCD grade in the CCGW09T302 format is well suited to high‑speed finishing of aluminium and other non‑ferrous materials, offering superior edge life and fine surface results when matched with the correct holder and cutting parameters. Can the insert be used for cast or abrasive non‑metal workpieces? This PCD grade is applicable to abrasive non‑metal materials as stated; however, matching the insert to the workpiece abrasiveness and machining conditions is important to maintain the longevity of the CCGW09T302 DX140 insert. What holder characteristics are recommended for stable machining with this insert? A rigid holder or boring bar with correct seat geometry and secure clamping is recommended to exploit the DX140’s performance; the ISO plate dimensions ensure compatibility provided form, clearance angle and thickness match the holder design. Does the lack of a chipbreaker limit application options? The absence of an integrated chipbreaker requires attention to cutting parameters and coolant or chip control measures; for many aluminium applications, smooth chip flow can be achieved with appropriate feed and toolpath strategies when using the Tungaloy DX140 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGW 09T304 DX140 Wendeplatten - Tungaloy
Take advantage of the combination of a DX140 PCD cutting material for high cutting speeds, a 0.4 mm corner radius for robust edge strength, and ISO compatibility for rapid tool changeovers; order the CCGW09T304 DX140 insert directly via Metav Werkzeuge or consult our technical advisors for holder matching. CCGW09T304 DX140 CCGW — Indexable Turning Insert, PCD for Turning | Tungaloy A CCGW09T304 DX140 indexable insert engineered for high-speed turning of aluminium and other non-ferrous and abrasive non-metal workpieces. PCD grade DX140 for high cutting speeds Very long tool life in abrasive materials ISO rhombic CCGW 09 form, 80° included angle 7° clearance and 0.4 mm corner radius Faster cycles with a PCD grade designed for non-ferrous alloys The insert is built around polycrystalline diamond (PCD) technology, represented here by the DX140 grade. That construction enables high cutting speeds and exceptional wear resistance when machining aluminium and other non-ferrous materials, which translates into shorter cycle times and fewer tool changes. The diamond cutting layer on a carbide substrate provides a very hard cutting edge that resists abrasive wear, resulting in a long tool life and predictable performance in production runs. ISO conformity for reliable fit and straightforward system integration Being an ISO-designated rhombic insert in the CCGW family ensures dimensional and positional conformity with standard external holders and boring bars. Compatibility is determined by shape, clearance angle, tolerance class, fastening method, size and thickness; this insert’s standardised geometry simplifies selection and reduces setup time. A complete system typically comprises the insert, a matched outer holder or boring bar, support shim/clamping kit and replacement screws, ensuring secure fastening and repeatable positioning during turning operations. Edge geometry tuned for strength and surface quality The insert features an 80° included angle, a 0.4 mm corner radius and a 7° clearance angle, which together affect cut stability and finish. The modest corner radius increases edge robustness for interrupted cuts while still supporting fine surface results on continuous passes. The 7° clearance reduces flank rubbing and heat generation. Note that this grade is supplied without a chipbreaker, so chip control must be planned via cutting parameters or external chip-control measures; selecting an appropriate chipformer and machining strategy is recommended based on workpiece material and machine stability. Robust backing and application scope for productive turning The substrate material is Hartmetall, giving the insert a stable base that supports the PCD cutting layer; the plate thickness of 3.97 mm and the size designation 09 provide rigidity for stable cutting. The insert is intended for turning applications—both external and internal—and is especially suited to abrasive non-metals in addition to aluminium and other non-ferrous metals. The cylindrical hole with single-sided countersink (40°–60°) ensures secure clamping in compatible holders, contributing to consistent finish quality and reduced rework rates. For expert advice on integrating the Tungaloy CCGW09T304 DX140 insert into existing tool systems and to confirm holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with technical matching and ordering. Technical Data Article number: 6801365 Manufacturer SKU: TUN6801365 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Name: CCGW09T304 DX140 Tungaloy-Wendeplatte Core specifications Size: 09 Plate form: rhombic Included angle: 80° Clearance (relief) angle: 7° Corner radius: 0.4 mm Plate thickness: 3.97 mm Materials & features Substrate: Hartmetall Cutting material: Polycrystalline diamond (PCD) Grade: DX140 Chipbreaker: without Hole: cylindrical hole + single-sided countersink (40°–60°) Application: Turning (external and internal) FAQ Is this insert suitable for aluminium machining? Yes. The CCGW09T304 DX140 insert uses a PCD cutting material specifically intended for aluminium and other non-ferrous materials, offering high cutting speeds and extended tool life. Can the insert be used for internal turning as well as external turning? Yes. The design and ISO form factor make the insert suitable for both external and internal turning operations when paired with the appropriate holder or boring bar. How does the absence of a chipbreaker affect machining? The DX140 insert is supplied without a chipbreaker, so chip control should be achieved through cutting parameters, tool path strategy or external chip-control devices, especially in unstable set-ups or with long continuous cuts. What does the 0.4 mm corner radius mean for finish and strength? A 0.4 mm corner radius increases edge strength for interrupted cuts and helps maintain a consistent surface finish on continuous cuts; it is a compromise between robustness and fine surface quality. Which holders are compatible with this insert? Compatibility follows ISO form and is determined by shape, relief angle, tolerance class, fastening method, size and thickness; matching holders designed for CCGW 09 inserts with a cylindrical hole and countersink are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGW 09T304 DX160 Wendeplatten - Tungaloy
Take advantage of PCD cutting performance and the DX160 grade for sustained high-speed machining and extended tool life; the rhombic ISO geometry ensures reliable compatibility with standard turning holders. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific setup and holder selection. CCGW 09T304 DX160 Tungaloy indexable turning insert — PCD grade for high-speed aluminium turning CCGW 09T304 DX160 Tungaloy indexable turning insert designed for high-speed external and internal turning of aluminium and non-ferrous materials. PCD grade DX160 for long tool life Optimised for aluminium and non-ferrous alloys ISO rhombic form 09 for versatile turning Central hole and countersink for secure clamping Precision for fast, repeatable aluminium machining The PCD cutting layer in the DX160 grade delivers consistently low wear when machining non-ferrous materials, translating into long tool life and fewer insert changes during batch production. On a carbide substrate, the diamond cutting edge maintains a sharp profile across long runs, which reduces downtime and improves process stability. For shops aiming to increase throughput on aluminium parts, this insert provides the high cutting speeds and abrasion resistance that support predictable cycle times without compromising surface finish. Compatibility and secure clamping for industrial setups As an ISO-series, rhombic insert in size 09, the geometry is compatible with standard turning holders when matching form, relief angle, tolerance class, fixing and thickness are observed. The central hole with a cylindrical bore and a one-sided countersink (40°–60°) ensures secure clamping and repeatable positioning in compatible toolholders. Attention to the specified 7° relief angle and the 3.97 mm thickness helps avoid improper seating; correct holder choice preserves edge life and machining accuracy, especially in interrupted cuts or less rigid setups. Practical benefits for production and tool selection Using a PCD grade tailored for aluminium and abrasive non-metals minimises built-up edge and improves surface integrity on cast and wrought non-ferrous components. The insert’s lack of a chipbreaker suits stable, continuous feeds where chip control is managed by tool geometry and process parameters. The 0.4 mm corner radius delivers a balance between edge strength and surface finish; selecting a larger radius increases robustness, whereas a smaller radius favours finer finishes. For general turning needs, this grade reduces overall tooling costs by extending service intervals and lowering scrap rates. Setup guidance and process reliability To achieve the advertised benefits, configure the turning system with a holder that matches the ISO rhombic form and the insert thickness; set cutting speeds appropriate for PCD on aluminium and ensure rigid workholding. The combination of a carbide substrate and the PCD cutting layer makes the insert particularly suitable for high-speed, high-volume applications where consistency is critical. For ambiguous cases—such as machining abrasive composites or mixed-material batches—consult machining data sheets or Metav Werkzeuge’s technical advisors to adapt feeds and speeds for optimal edge life. Contact Metav Werkzeuge for tailored recommendations on the Tungaloy CCGW 09T304 DX160 insert and holder compatibility; technical advisors are available to assist with process parameter selection and application validation. Technical Data Article number: 6801366 Manufacturer SKU: TUN6801366 SKU: 6801366-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: CCGW09T304 DX160 Tungaloy-Wendeplatte Key measurements Included angle: 80° Relief angle: 7° Plate thickness: 3.97 mm Corner radius: 0.4 mm Plate size: 09 Materials & special features Substrate material: Hartmetall (carbide substrate) Cutting material: Polycrystalline diamond (PCD), grade DX160 Shape: rhombic (CCGW) Hole: with hole (central bore) Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: without Typical application: external and internal turning Suitable for: aluminium, non-ferrous metals and abrasive non-metals System requirements: ISO insert, matching holder and clamping set required FAQ What materials is this insert intended for? The CCGW 09T304 DX160 insert from Tungaloy is designed primarily for aluminium, other non-ferrous metals and abrasive non-metals, leveraging the PCD cutting edge for long life. How does the DX160 grade improve production? DX160 provides a hard, wear-resistant PCD edge that sustains high cutting speeds and extends in-service time, reducing insert changes and improving throughput for turning operations. Which holder features are required for safe use? A holder matching the rhombic ISO form, correct tolerance class, fixing method and the 3.97 mm thickness is required; the central hole and countersink ensure secure clamping when the holder is compatible. Is there a chipbreaker on this insert? This variant is supplied without a chipbreaker, making it suitable for continuous-feed turning where chip control is managed by geometry and process parameters. Can the insert be used for internal turning? Yes, the insert is suitable for both external and internal turning, provided the holder and rigidity of the setup match the application demands. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGW 09T304 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of long tool life, ISO compatibility and stable cutting-edge performance for efficient turning operations; order or request application advice via Metav Werkzeuge. CCGW 09T304 GH110 twist insert for turning — Tungaloy The CCGW09T304 GH110 is an ISO-format indexable turning insert designed for external and internal turning, offering a balance of wear resistance and edge stability for productive metalcutting. ISO rhombic insert CCGW 09T304 GH110 0.4 mm corner radius for precise contouring 7° relief angle with 80° cutting geometry Carbide grade GH110 for wear resistance Robust carbide grade for sustained productivity The insert is manufactured from carbide and specified in the GH110 grade, which combines wear resistance with adequate toughness to maintain a stable cutting edge under continuous operation. This composition reduces edge degradation and extends service intervals, contributing to predictable cycle times and less downtime. The result is improved productivity for machining tasks where consistent surface quality and tool life are priorities. ISO-format design for straightforward tool-system integration As an ISO-format component, the insert is compatible with holders that match its form, relief angle, tolerance class, fastening method, size and thickness. This standardisation simplifies inventory management and enables rapid changeovers on the shop floor. Where exact fit is essential, matching the insert to the correct holder geometry avoids positioning errors and supports repeatable set-ups in production environments. Geometry engineered for versatile turning performance The rhombic insert form with an 80° cutting angle and 0.4 mm corner radius offers a good compromise between strength and contour fidelity, suitable for a range of finishing and semi-finishing tasks. A 7° relief helps to reduce rubbing at the flank and improves chip flow. The article is supplied without a chipbreaker, permitting selection of cutting parameters and downstream chip-control measures to suit the specific material and process stability requirements. Practical selection and application guidance Intended for turning operations, the insert supports external and internal machining when paired with the appropriate holder and clamping set. Toolset planners should consider cutting speed, feed and depth of cut together with the GH110 characteristics to exploit the grade’s balance of wear resistance and edge stability. For specific machining recommendations or to confirm compatibility with an existing holder arrangement, the Metav Werkzeuge team can provide tailored advice and technical data. For application-oriented ordering and further technical consultation on the Tungaloy GH110 insert, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — to ensure the component fits the intended turning system and process conditions Technical data Article number: 6801363 Manufacturer SKU: TUN6801363 SKU: 6801363-Tungaloy Designation: CCGW09T304 GH110 Tungaloy insert Key dimensions Size: 09 Thickness: 3.97 mm Corner radius: 0.4 mm Relief angle: 7° Cutting geometry: 80° Materials / Special features Material: carbide Grade: GH110 (Tungaloy) Shape: rhombic Chipbreaker: without chipbreaker Hole style: cylindrical hole + single-sided countersink (40°–60°) Series: ISO indexable turning inserts Application: turning FAQ What is the insert made from and which grade is used? The insert is made from carbide and specified in the GH110 grade; the GH110 formulation provides a compromise of wear resistance and edge stability suitable for productive turning. Which toolholders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the ISO-format CCGW09T304 GH110 is intended for holders designed for CCGW 09 inserts. Does the insert include a chipbreaker? The supplied insert is without a chipbreaker, allowing process engineers to select chip-control strategies and cutting parameters that match the workpiece and machining conditions. For which turning tasks is this insert suitable? The insert is intended for external and internal turning operations where a balance of contour accuracy and tool life is required; pairing with an appropriate holder and cutting data is critical for best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGW 09T304 TH10 Wendeplatten - Tungaloy
Combining the sharp TH10 grade, ISO compatibility and robust carbide construction ensures low cutting forces and clean surface finishes in turning operations; order the CCGW09T304 TH10 directly via Metav Werkzeuge or consult our advisors for application support. CCGW 09T304 TH10 — ISO rhombic turning indexable insert by Tungaloy A CCGW09T304 TH10 indexable turning insert designed for external and internal turning, offering a sharp universal grade optimised for non‑ferrous materials and low‑force machining. ISO‑standard rhombic insert, 80° included angle Sharp TH10 grade for low cutting forces Uncoated carbide for clean surface finish 0.4 mm corner radius, with cylindrical hole High‑efficiency turning with a low‑force edge The CCGW09T304 TH10 is engineered as a high‑efficiency indexable insert for turning applications where reduced cutting forces and superior finish matter. Its uncoated carbide composition and the sharp TH10 grade combine to lower power draw and produce clean surface finishes on non‑ferrous and soft alloys. This configuration reduces the risk of built‑up edge, which in turn lowers rework and enhances throughput—an economic advantage in both small‑batch and serial production. Predictable fit and straightforward holder compatibility Supplied to ISO geometry, the insert offers predictable interchangeability across standard holders; compatibility depends on form, relief angle (7°), tolerance class, mounting method, size and thickness. Clear specification of these parameters simplifies tool selection and reduces downtime when replacing inserts. The 80° included angle and rhombic form allow stable engagement in shoulder and profiling operations, contributing to reproducible process results and easier set‑up in mixed‑machine environments. Application guidance and material suitability The sharp universal grade is particularly suited to non‑ferrous materials and operations that benefit from a clean, uncoated cutting edge. As the insert is without a chipbreaker, chip formation must be managed through appropriate feeds, speeds and coolant strategy; this provides flexibility to tune chip form for specific alloys and toolpaths. Where controlled chipbreaking is required, pairing with a suitable geometry or alternate grade is recommended to maintain productivity without sacrificing surface quality. Secure clamping and stable cutting performance Mechanical design features such as the cylindrical hole with single‑side countersink (40°–60°) deliver reliable clamping in compatible holders, while the 0.4 mm corner radius reduces edge stress and improves resistance to chipping during interrupted cuts. With a plate thickness of 3.97 mm and the ISO rhombic format, the insert provides a balance between rigidity and accessibility for close‑tolerance turning. The system concept typically includes a matching outer holder or boring bar, a seating pad/clamping set and replacement screws to ensure consistent seating and repeatable results. For reliable, low‑force turning with Tungaloy quality, contact Metav Werkzeuge for availability and tailored machining advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6801364-Tungaloy Manufacturer SKU: TUN6801364 Manufacturer article number: 6801364 Model series: ISO turning inserts Material: carbide Brand: Tungaloy Facts Corner radius: 0.4 mm Included angle: 80° Relief angle: 7° Plate thickness: 3.97 mm Size designation: 09 SKU: 6801364-Tungaloy Special features Uncoated carbide grade TH10 Rhombic plate form (CCGW) With hole; cylindrical + single‑side countersink (40°–60°) No chipbreaker For external and internal turning Compatible with ISO holders; check form and tolerance FAQ Which materials are best suited to this insert? The CCGW09T304 TH10 insert is optimised for non‑ferrous materials and soft alloys; the uncoated carbide and sharp TH10 grade support low cutting forces and clean surfaces in these applications. How does the TH10 grade affect machining compared with coated grades? TH10 is an uncoated, sharp universal grade that reduces cutting forces and helps prevent built‑up edge; compared with coated grades it often gives better surface finish on non‑ferrous materials but may require careful parameter selection for high‑speed or abrasive applications. What must be checked for holder compatibility? Compatibility requires matching the insert form, relief angle (7°), tolerance class, mounting method, size (09) and thickness (3.97 mm); confirm these dimensions against the chosen ISO holder or boring bar before assembly. Does the insert include a chipbreaker? This variant is supplied without a chipbreaker, so chip control should be managed via cutting parameters, coolant and toolpath strategy to achieve the desired chip form and surface quality. How does the clamping design contribute to performance? The cylindrical hole with single‑side countersink (40°–60°) provides secure seating and repeatable clamping force, while the 0.4 mm corner radius helps reduce edge chipping during interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGW 09T308 DX140 Wendeplatten - Tungaloy
Take advantage of the combination of high cutting speeds, exceptional wear resistance and ISO compatibility for streamlined aluminium turning. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. CCGW 09T308 DX140 indexable turning insert by Tungaloy — polycrystalline diamond for high-speed aluminium machining CCGW09T308 DX140 is a precision ISO indexable insert designed for turning aluminium and other non-ferrous materials, offering superior durability and suitability for both external and internal turning operations DX140 PCD grade for aluminium and non-ferrous Enables high cutting speeds and long life ISO rhombic shape, 80° cutting edge angle Cylindrical hole with single-sided countersink Faster machining with prolonged tool life The DX140 polycrystalline diamond (PCD) grade provides very high cutting speeds and a long tool life, reducing idle time caused by insert changes and improving overall spindle uptime. For workshops processing large volumes of non-ferrous components, the PCD cutting edge significantly minimises abrasive wear, which translates into fewer interruptions and lower running costs per part. The rhombic geometry and robust substrate ensure consistent contact with the workpiece and predictable wear behaviour. Secure fitting and ISO-based system compatibility Compatibility with clamping systems is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so an ISO-standard holder must be matched accordingly. The insert conforms to ISO sizing and is supplied in the common rhombic format with an 80° main cutting angle and 7° clearance angle, which facilitates straightforward replacement and repeatable seating. The system typically comprises the indexable insert, a matched external holder or boring bar, an underlay/clamp set and replacement screws for reliable assembly. Application guidance and safe material pairing This PCD grade is optimised for aluminium and non-ferrous metals as well as abrasive non-metal materials; it is not intended for general steel machining. The insert has no integrated chipbreaker, so matching the chip control geometry to the material and process stability is essential for reliable chip evacuation. For internal turning and boring applications, ensure adequate rigidity of the setup and select a holder with the correct overhang to avoid vibration. Where applicable, use appropriate cooling strategies and ramp up cutting parameters gradually to exploit the insert’s durability. Contact Metav Werkzeuge for tailored recommendations on using this Tungaloy DX140 PCD insert and to check holder compatibility Technical Data Article number: 6801368 Manufacturer SKU: TUN6801368 SKU: 6801368-Tungaloy Brand: Tungaloy Model series: ISO indexable turning inserts Facts Designation: CCGW09T308 ISO code: 09T308 Size: 09 Radius: 0.8 mm Thickness: 3.97 mm Clearance angle: 7° Cutting edge angle: 80° Special features Polycrystalline diamond (PCD) DX140 Substrate material: carbide Suitable for aluminium, non-ferrous metals and abrasive non-metals Rhombic insert shape No chipbreaker Cylindrical hole with single-sided countersink (40°–60°) FAQ What materials is this insert best suited for? The CCGW09T308 DX140 insert is optimised for aluminium, other non-ferrous metals and abrasive non-metallic materials, delivering long life and high cutting speeds in these applications. Can the insert be used in standard ISO holders? Yes. The insert follows ISO dimensions and fits standard indexable turning holders when the form, clearance angle, tolerance class, fastening and thickness are matched. Does the insert include a chipbreaker? No, this grade is supplied without a chipbreaker; chip control must be achieved by selecting a suitable holder geometry and machining parameters for the workpiece and stability. How does the DX140 grade affect productivity? DX140 PCD provides high wear resistance and extended tool life, which reduces tool change frequency and supports higher cutting speeds, improving throughput in repetitive non-ferrous machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060202 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of AH120 PVD-coated carbide and a fine 0.2 mm corner radius for consistent surface quality and extended tool life; order through Metav Werkzeuge or consult our technical team for application support and availability. CCMT060202 AH120 — Turning Indexable Insert (ISO CCMT 060202) by Tungaloy CCMT060202 AH120 is an ISO-standard indexable insert for turning, developed for wear resistance and stable cutting performance in general turning operations ISO CCMT 060202 format PVD-coated carbide for wear resistance Sharp cutting edge for process stability Rhombic 80° shape with 7° clearance angle Longer tool life through proven wear protection The AH120 grade combines a PVD coating with a tough cemented carbide substrate to deliver improved wear resistance and reduced chipping during turning operations. This construction reduces flank and crater wear, resulting in more consistent cutting forces and longer edge life compared with uncoated grades. The combination of coating and substrate in this grade is especially suited for applications where a sharp cutting edge and reliable tool life are required, helping to maintain machine uptime and reduce intervention frequency on the shop floor. Predictable chip control and improved surface finish The rhombic geometry with an included angle of 80°, a 0.2 mm corner radius and the single-sided chipbreaker support controlled chip formation and stable cutting at moderate depths of cut. The small corner radius favours fine surface finishes and accurate profile reproduction, while the chipbreaker design assists evacuation of swarf and reduces the risk of built-up edge. The insert’s 7° clearance angle preserves cutting-edge integrity and helps to avoid rubbing, which together contribute to repeatable part quality and fewer reworks. ISO compatibility and practical system integration As an ISO-indexed plate, the insert fits holders that match form, clearance, tolerance class, fastening, size and thickness — enabling straightforward replacement within standard turning tool systems. The plate thickness of 2.38 mm and the mounting feature (a cylindrical hole with a single-sided countersink, 40°–60°) provide secure seating and repeatable clamping. The system setup normally comprises the indexable insert, a suitable external holder or boring bar, a support shim and clamp plus replacement screws, which simplifies inventory and reduces setup complexity in mixed-production environments. Contact Metav Werkzeuge today to discuss suitability for specific turning tasks, check stock of Tungaloy AH120 inserts, or request tailored advice from our technical consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6852434 SKU: 6852434-Tungaloy Manufacturer SKU: TUN6852434 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CCMT060202 AH120 Facts Corner radius: 0.2 mm Thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Plate size: 06 Special features Material: Hartmetall (cemented carbide) Grade/coating: AH120, PVD-coated Shape: Rhombic (CCMT) Chipbreaker: Single-sided Hole: cylindrical with single-sided countersink (40°–60°) Application: Drehen (turning) System assembly: insert + holder or boring bar + shim/clamp + replacement screws FAQ What materials is this insert intended for? The CCMT060202 AH120 indexable insert by Tungaloy is designed for turning applications where a wear- and breakage-resistant grade is required; selection of chipbreaker and cutting parameters should be matched to the specific workpiece material and machining stability. How does the AH120 grade affect tool life? The AH120 PVD-coated carbide in this CCMT insert improves resistance to abrasion and chipping, which extends edge life and contributes to consistent performance over longer production runs. What are the mounting requirements for the insert? The insert uses a cylindrical hole with a single-sided countersink (40°–60°), requiring a compatible CCMT holder, appropriate shim and clamp, and the correct replacement screws to ensure secure, repeatable seating. Can this insert produce fine surface finishes? Yes — the small 0.2 mm corner radius combined with the rhombic geometry and 7° clearance angle supports fine surface quality and accurate profile replication during finishing and light turning passes. What are the identification numbers for ordering or inventory? Refer to article number 6852434 and SKU 6852434-Tungaloy when specifying the CCMT060202 AH120 turning insert for procurement or stock control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060202 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH6225 carbide grade for stainless steels, a 0.2 mm corner radius and an 80° rhombic geometry that delivers a sharp, stable cutting edge and consistent chip control; order the insert directly via Metav Werkzeuge or contact our consultants for holder compatibility and batch availability. CCMT060202 AH6225 Tungaloy turning insert — PVD-coated carbide, 80° rhombic The CCMT060202 AH6225 is an ISO rhombic indexable insert engineered for medium-duty turning of stainless steels, combining a sharp, stable cutting edge with a single-sided chipbreaker for predictable chip formation. PVD-coated carbide for stainless steel Rhombic plate, 80° geometry 0.2 mm corner radius for precision Central hole with cylindrical countersink Reliable chip control for stainless-steel turning The combination of a PVD-coated surface and the AH6225 grade provides balanced wear resistance and toughness, tailored for the machining behaviour of stainless steel. The single-sided chipbreaker promotes controlled chip segmentation under varying cut depths and feeds, which reduces the risk of built-up edge and improves surface finish. By stabilising chip flow, the insert reduces the frequency of interrupted cuts and contributes to more predictable cycle times; in production environments this translates into improved process efficiency and fewer operator interventions. Precision geometry for consistent toolpaths and clamping A rhombic 80° shape with a 0.2 mm corner radius and a plate thickness of 2.38 mm ensures a stable cutting line and repeatable radial engagement. The central cylindrical hole with a single-sided countersink (40°–60°) secures the insert in standard ISO-compatible holders, maintaining positional accuracy across indexing cycles. These geometric attributes minimise vibration and deflection during turning, which supports tighter dimensional control and reduced rework. The ISO designation guarantees interchangeability and simplifies tool inventory management across multiple machines. Versatile performance and predictable tool life Designed as a universal grade for rostfreier Stahl (stainless steel) machining, this insert suits a variety of medium cutting conditions and mixed production batches. The PVD-coated carbide substrate balances edge strength and wear resistance, delivering steady tool life even when conditions change between soft and work-hardened zones. The constructive combination of chipbreaker, coating and geometry supports a cost-effective production flow by lowering tool-change frequency and contributing to consistent surface quality. For operations seeking process stability, the design reduces the likelihood of unexpected stoppages and helps sustain production targets. Contact Metav Werkzeuge for application advice and immediate availability of the Tungaloy CCMT060202 AH6225 turning insert; our consultants will assist with holder selection, cutting-parameter recommendations and order processing Technical data Article number: 6829047 Manufacturer SKU: TUN6829047 Stock SKU: 6829047-Tungaloy Material: Carbide Model series: ISO turning indexable inserts Dimensional data Plate size: 06 Plate thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Lead/approach angle: 80° Special features ISO designation: CCMT060202 Grade/coating: AH6225, PVD-coated carbide Plate shape: Rhombic Chipbreaker: Single-sided Hole style: With central hole; cylindrical hole + single-sided countersink (40°–60°) Typical application: Turning (external and internal) Compatibility: ISO-standard holders; clamping depends on shape, relief angle, tolerance class and thickness FAQ What materials is this insert suitable for? The CCMT060202 AH6225 Tungaloy turning insert is optimised for stainless steels and performs well under medium-duty turning conditions that demand a sharp, stable cutting edge. How does the AH6225 coating affect performance? The PVD-coated AH6225 grade enhances wear resistance while retaining edge toughness, helping the insert deliver predictable tool life and stable machining behaviour on stainless-steel components. Can this insert be used in any ISO holder? The insert follows the ISO CCMT form and is compatible with holders designed for CCMT inserts; secure clamping requires matching the holder to the insert’s shape, relief angle, thickness and clamping style. What advantages does the 0.2 mm corner radius provide? A 0.2 mm corner radius balances surface finish and edge strength, allowing precise turning with reduced risk of chipping at moderate depths of cut and helping to maintain dimensional accuracy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060202 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, a sharp yet stable cutting edge, and ISO compatibility for reliable stainless steel turning — order via Metav Werkzeuge or consult our specialists for process-adapted recommendations. CCMT 060202 AH6225 turning insert (ISO) by Tungaloy — PVD-coated carbide, optimised for stainless steels CCMT 060202 AH6225 is a rhombic ISO-format indexable insert designed for external and internal turning, delivering a stable cutting edge and consistent results in medium machining and variable conditions. ISO rhombic format CCMT 06 PVD-coated carbide grade AH6225 Optimised for stainless steels Sharp, stable cutting edge Consistent performance for stainless steel turning with fewer tool changes The CCMT 060202 AH6225 indexable insert focuses on repeatable process stability when machining stainless steels. Its PVD-coated carbide grade AH6225 is engineered to maintain a sharp and stable cutting edge at medium cutting depths and under changing conditions, which reduces unplanned tool changes and minimises machine downtime. The combination of coating and substrate improves wear resistance and chip control, so shops achieve predictable life per edge and steadier component tolerances. The single-sided chipbreaker supports controlled chip formation during continuous turning operations. Geometry that promotes dimensional accuracy and surface quality Precisely defined geometry increases productivity: the rhombic plate form with an 80° lead angle and relief angle 7° provides favourable cutting forces and access to external and internal contours. The corner radius 0.2 mm offers a balance between edge strength and fine surface finish, suitable for finishing and medium turning passes. Because the insert follows ISO format, it enables straightforward tool-change planning and interchangeability across compatible holders, supporting lean production and predictable machining cycles. The insert’s with hole design and the cylindrical hole with one-sided countersink (40°–60°) ensure secure clamping and repeatable seating in the appropriate external holders or boring bars. Practical system integration and process benefits for workshops This ISO-format insert is part of a system comprising the insert, a matching external holder or boring bar, a support/locking set and replacement screws. Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; using the correct combination ensures correct seating and reliable performance. The plate thickness 2.38 mm and size 06 scale make it well suited to common toolholders, while the PVD coating aids in thermal stability and wear protection. For production environments seeking steady cycle times and consistent surface quality, the insert’s engineering supports both batch production and job-shop flexibility without sacrificing repeatability. Discuss machining requirements with Metav Werkzeuge for tailored advice on Tungaloy CCMT 060202 AH6225 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951121-Tungaloy Manufacturer SKU: TUN6951121 Manufacturer article number: 6951121 Model series: ISO-Drehwendeschneidplatten Designation: CCMT060202 AH6225 Tungaloy turning insert Facts Size: 06 Plate thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Lead angle: 80° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Material: carbide (hartmetall) Coating: PVD-coated carbide (grade AH6225) Plate form: rhombic (CCMT) Chipbreaker: single-sided Application: turning (external and internal) System: ISO-format insert for compatible holders, support/locking set and screws Typical use: medium machining and variable cutting conditions, optimised for stainless steels FAQ What materials is this insert best suited for? The CCMT 060202 AH6225 insert is optimised for stainless steels and performs well in medium turning operations where a stable, sharp edge is required. How does the PVD coating benefit machining performance? The PVD-coated carbide substrate on the Tungaloy indexable insert improves wear resistance and thermal stability, leading to more consistent edge life and better surface quality in varying conditions. Which holders are compatible with this ISO-format insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; choose holders specified for CCMT 06 ISO inserts to ensure correct seating and clamping. What is the advantage of the 0.2 mm corner radius? A corner radius of 0.2 mm balances edge strength and surface finish, making it suitable for finishing passes and controlled roughing where precise dimensions are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060202 AH6225 Wendeplatten - Tungaloy
Take advantage of the cost-effective PVD-coated carbide, the sharp stable cutting edge, and the precise 80° rhombic geometry for consistent turning performance; order the inserts directly via Metav Werkzeuge or consult our specialists for application advice. CCMT 060202 AH6225 Tungaloy turning insert — PVD-coated carbide, 80° rhombic geometry CCMT 060202 AH6225 Tungaloy turning insert for general turning applications, optimised for rostfreier Stahl and medium cutting conditions. PVD-coated carbide AH6225 Designed for rostfreier Stahl machining 80° rhombic geometry for versatile turning 0.2 mm nose radius for fine profile control Consistent cutting performance for rostfreier Stahl The CCMT060202 AH6225 insert combines a PVD-coated carbide substrate with a geometry tailored to turning operations, delivering a sharp yet stable cutting edge suitable for changing conditions. The combination of the single-sided chipbreaker and the 0.2 mm nose radius supports controlled chip formation and improved surface finish when machining rostfreier Stahl, reducing rework and downtime. The design is especially helpful where process reliability and repeatable tool life are required in medium-duty production. Compatibility and handling to simplify setup As an ISO indexable insert, the item is compatible with standard holders provided the holder matches the insert’s 80° form, 7° relief angle and tolerance class. The insert features a cylindrical hole with a one-sided countersink (40°–60°) and a plate thickness of 2.38 mm, enabling secure clamping and straightforward replacement in both external and internal turning applications. Clear geometry and standardised dimensions support quick tool changes and consistent positioning, improving machine uptime and operator efficiency. Durable edge life and economical machining The AH6225 grade is a universal coating/carÂbide combination engineered for a balance between edge sharpness and robustness, resulting in longer effective life under varied cutting conditions. The insert’s PVD coating enhances wear resistance and helps maintain a stable cutting edge, which pays off through fewer indexings and lower tooling costs per part. Optimised chip control reduces heat build-up and surface damage, supporting higher quality results with lower scrap rates. Contact Metav Werkzeuge for tailored application advice and fast supply of Tungaloy CCMT 060202 AH6225 inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951102 Manufacturer SKU: TUN6951102 SKU: 6951102-Tungaloy Name: CCMT060202 AH6225 Tungaloy turning insert Material: carbide Facts Nose radius: 0.2 mm Insert angle: 80° Relief angle: 7° Thickness: 2.38 mm Size designation: 06 Special features PVD-coated carbide grade AH6225 Rhombic insert shape (80°) Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO indexable turning insert series Suitable for turning (external and internal) Compatible with standard holders, underlay and clamping sets Application focus: rostfreier Stahl FAQ What materials is this insert suited for? The CCMT 060202 AH6225 Tungaloy turning insert (SKU 6951102-Tungaloy) is primarily intended for machining rostfreier Stahl and other similar steels under medium cutting conditions. How does the AH6225 grade affect tool life? The AH6225 PVD-coated carbide provides a balance of sharpness and wear resistance, which extends effective edge life and reduces the frequency of indexings for this Tungaloy indexable insert. Which holders are compatible with this ISO insert designation? Compatibility depends on matching the ISO form, 7° relief angle, tolerance class, size 06 and the 2.38 mm plate thickness; standard external and boring holders designed for CCMT inserts will accept this item. What chip control can be expected from the single-sided chipbreaker? The single-sided chipbreaker supports predictable chip formation and evacuation, improving surface finish and thermal behaviour when turning with this insert. Is the insert supplied with screws or clamping elements? The insert is an ISO indexable cutting plate; holders, underlays, clamping sets and replacement screws form the system and should be selected separately to match the insert’s dimensions and hole style. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060202 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a tougher AH6235 grade and precise geometry for reliable turning performance; order the CCMT060202 AH6235 Tungaloy insert directly via Metav Werkzeuge or ask the consultants if needed. CCMT 060202 AH6235 Tungaloy turning insert — ISO rhombic 06, PVD-coated carbide CCMT060202 AH6235 Tungaloy turning insert for external and internal turning applications, designed for stainless steels and interrupted cuts with an ISO-compliant rhombic form and one-sided chipbreaker PVD-coated AH6235 grade carbide 0.2 mm corner radius for fine finishes 7° clearance angle to reduce rubbing ISO rhombic 06 with cylindrical hole and countersink Consistent performance for demanding turning tasks The CCMT060202 AH6235 Tungaloy insert is engineered to deliver stable cutting and predictable tool life in challenging turning operations. The PVD-coated carbide grade AH6235 provides a tougher substrate that resists chipping during interrupted cuts and where breakout risk is elevated. This results in fewer indexings and more consistent cycle times, supporting production efficiency and lower overall tool consumption. The combination of coating and substrate enables a balance between wear resistance and edge toughness, particularly suited to machining stainless steels and other difficult-to-machine alloys. Precision geometry that improves surface quality and process stability A rhombic 06 format with an 80° approach angle, 0.2 mm corner radius and 7° clearance angle reduces radial forces and vibration, which directly benefits surface finish and dimensional repeatability. The small corner radius offers controlled cutting engagement for fine detail and finishing passes, while the clearance angle minimises flank contact and heat build-up. These geometric choices make the insert a reliable option for both roughing with interrupted cuts and finishing operations, ensuring predictable tool behaviour and fewer rejects in series production. Practical system integration and machining guidance This ISO-design insert requires a matching holder, clamping set and replacement screws; compatibility is determined by form, clearance, tolerance class, fixing method, size and thickness. The one-sided chipbreaker assists chip control in common turning scenarios, aiding swarf evacuation and reducing re-cutting. For machining strategy, select a holder and cutting parameters aligned to the insert's tougher AH6235 grade to exploit its resistance to chipping—this reduces downtime for insert changes and supports a steadier machining process. If the application includes frequent interruptions or difficult-to-machine stainless grades, this insert delivers a pragmatic balance of robustness and finish quality. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy CCMT060202 AH6235 insert into production; email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and availability Technical data Article number: 6890156 Manufacturer SKU: TUN6890156 SKU: 6890156-Tungaloy Model series: ISO indexable turning inserts Material: carbide Facts ISO designation: 060202 Size: 06 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Insert angle: 80° Special features Coating / grade: AH6235 (PVD-coated carbide) Chipformer: one-sided chipbreaker Shape: rhombic Hole: cylindrical hole + single-side countersink (40°–60°) Application: turning (external and internal) Recommended for: stainless steels, interrupted cuts and high breakout risk System components: ISO insert, matching holder, clamping set and replacement screws FAQ What types of machining suit this insert? The CCMT060202 AH6235 Tungaloy turning insert is intended for external and internal turning, with particular strength in interrupted cuts and machining of stainless steels where edge toughness is essential. Which materials is the AH6235 grade best for? AH6235 is a PVD-coated carbide grade tuned for tougher materials; it performs well on stainless steels and in conditions prone to chipping or breakout. How does the 0.2 mm corner radius affect finishes? A 0.2 mm corner radius offers controlled engagement for improved surface finish on finishing passes while still tolerating some roughing, helping to achieve repeatable part quality with the CCMT060202 insert. Is special holder geometry required for this insert? The insert is ISO-compliant; compatibility depends on holder form, clearance, tolerance class, fixing and size. Use a holder rated for rhombic 06 inserts and appropriate clamping hardware. What chip control can be expected from the insert? The one-sided chipbreaker assists chip formation and evacuation in typical turning operations, reducing swarf-related issues and promoting a steadier cutting process with fewer interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060202 AH725 Wendeplatten - Tungaloy
A robust combination of PVD‑coated carbide in the AH725 grade and ISO‑standard CCMT geometry delivers fracture‑resistant performance for demanding turning tasks; the rhombic 80° form and secure centre hole ensure repeatable clamping and stable machining. Order the CCMT060202 insert directly via Metav Werkzeuge or contact our consultants for matching holder and process advice. CCMT060202 AH725 Tungaloy turning insert — PVD‑coated carbide, rhombic 80° CCMT060202 AH725 Tungaloy insert for ISO‑standard turning, suited to external and internal operations with high process security and mixed‑material use ISO indexable insert CCMT 060202 PVD‑coated carbide AH725 One-sided chipbreaker, rhombic 80° form Compatible with ISO standard holders Reliable cutting performance across steels and stainless steels The PVD‑coated carbide specification paired with the AH725 grade offers a balanced combination of toughness and wear resistance, designed to reduce edge chipping under interrupted cuts and variable workpiece materials. This universal, fracture‑resistant grade is particularly suitable where process security is critical and tool sizes are compact. The result is more consistent metal removal and fewer insert changes, which supports steady production throughput. Secure clamping and geometry that enhances surface quality The rhombic plate form with an 80° included angle and a 0.2 mm corner radius promotes stable engagement and controlled chip flow when used with matching holders. The insert is supplied with a centre hole and a cylindrical hole plus single‑side countersink (40°–60°), ensuring positive fixation and repeatable seating; clamping stability is decisive for achieving consistent surface finish and dimensional accuracy. Compatibility to a holder depends on form, relief angle, tolerance class, fastening method, size and thickness — all parameters to be checked when integrating the insert into an existing tool system. Practical system design for efficient workshop use The CCMT insert belongs to an ISO series system that comprises the insert, a suitable external holder or boring bar, shims/clamping sets and replacement screws. With a plate thickness of 2.38 mm and standard ISO size designation 06, the component is designed for straightforward replacement and inventory management. Selecting the correct one‑sided chipbreaker and grade for the target material optimises chip control and minimises rework, delivering measurable productivity gains and lower overall machining costs. Application guidance and suitability Designed for general‑purpose turning, the insert is effective on a wide range of steels and stainless steels; the universal nature of the AH725 grade also accommodates workflow variability where multiple materials are machined on the same line. For best results, pair the insert with a holder that matches the plate geometry and tolerance class, and verify recommended cutting data for feed and speed according to tool‑maker guidelines. The compact geometry supports internal and external operations where accessibility and rigidity must be balanced. Contact Metav Werkzeuge for tailored application support on the Tungaloy CCMT060202 AH725 insert — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss holder compatibility and cutting parameters Technical data Article number: 6856760 SKU: 6856760-Tungaloy Manufacturer SKU: TUN6856760 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Label: CCMT060202 AH725 Tungaloy‑Wendeplatte Facts Corner radius: 0.2 mm Relief angle: 7° Included angle: 80° Thickness: 2.38 mm Size: 06 ISO code: 060202 Special features PVD‑coated carbide Grade: AH725, universal fracture‑resistant One‑sided chipbreaker Rhombic plate form With hole: cylindrical hole + single‑side countersink (40°–60°) Intended use: turning (external and internal) System components: insert, holder/boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suited for? The CCMT060202 AH725 Tungaloy insert is formulated for general use on steel and stainless steels and is appropriate where a fracture‑resistant universal grade is required. How is the insert mounted and secured? The insert is supplied with a cylindrical centre hole and a single‑side countersink (40°–60°) to enable secure clamping in ISO‑compatible holders and repeatable seating. Which chipbreaker should be selected for interrupted cuts? Choose a matching one‑sided chipbreaker and, if necessary, a tougher grade; the AH725 insert with the specified chipbreaker improves chip control under interrupted cutting and mixed‑material conditions. Does the CCMT060202 fit standard ISO turning holders? Compatibility is determined by plate form, relief angle, tolerance class, fastening method, size and thickness; the CCMT060202 follows ISO dimensions but holders should be checked for the listed parameters. What are the key geometry values to note for programming and setup? Key values include the 0.2 mm corner radius, 7° relief angle, 80° included angle and 2.38 mm thickness, which affect cutting engagement and tool offset settings. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 060202 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH725 grade for broad material coverage, precise ISO CCMT geometry and a 0.2 mm corner radius to maintain process stability and consistent surface quality; order the insert directly via Metav Werkzeuge or consult our specialists for matching chipbreaker and holder selection. CCMT060202 AH725 Tungaloy turning insert — ISO turning insert for Drehen A CCMT060202 AH725 turning insert designed for external and internal turning, offering a PVD-coated carbide grade for universal, break-resistant performance across steels and stainless steels. PVD-coated AH725 carbide grade ISO rhombic CCMT form, 80° cutting angle 0.2 mm corner radius for fine finishing Cylindrical hole with single countersink 40°–60° Consistent machining and extended tool life through a universal grade The PVD-coated AH725 carbide composition delivers a balance of toughness and wear resistance that suits mixed production runs. As a universal, break-resistant grade, it reduces interruptions caused by insert chipping and supports steady cutting conditions when working with both standard steels and stainless steels. The result is improved process security and fewer tool changes, which contributes directly to higher machine uptime and predictable part quality. Precision geometry that improves surface finish and repeatability The ISO rhombic CCMT form with an 80° cutting angle and a 0.2 mm corner radius offers a blend of strength and fine finishing capability. A small radius like 0.2 mm reduces cutting forces for delicate finishing passes while still permitting acceptable edge strength for light to medium cuts. The plate thickness of 2.38 mm and the integrated chipbreaker on the one-sided face stabilise chip formation, while the cylindrical hole with a single countersink (40°–60°) ensures secure, repeatable clamping and positional accuracy in standard ISO-compatible holders. Simple integration into ISO tool systems and application guidance Compatibility with holders is determined by form, free angle (7°), tolerance class, fastening, size and thickness; this insert fits standard ISO setups when those parameters match. Typical uses include both external and internal turning, where selection of the correct chipbreaker and the AH725 grade should be aligned with material mix and cutting conditions. For precision production, pairing this insert with a matched outside holder, support pad and correct torque on the clamping screw will yield the most consistent outcomes and prolong edge life. For authentic Tungaloy performance and optimised process security, order CCMT060202 AH725 turning inserts through Metav Werkzeuge; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored cutting recommendations and holder compatibility checks. Technical data Article number: 6865191 SKU: 6865191-Tungaloy Manufacturer SKU: TUN6865191 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.2 mm Thickness: 2.38 mm Cutting angle: 80° Clearance angle: 7° Plate size: 06 Special features Material: carbide Grade/coating: AH725 (PVD-coated) Plate form: rhombic Hole: with cylindrical hole + single countersink (40°–60°) Chipbreaker: one-sided Application: turning (external & internal) FAQ Which materials is this insert suitable for? The CCMT060202 AH725 Tungaloy turning insert is formulated for machining steels and stainless steels, offering a universal balance of toughness and wear resistance for mixed-material production. How does the insert locate and clamp in a holder? Compatibility is governed by form, free angle, tolerance class, fastening, size and thickness; the CCMT060202 uses a cylindrical hole with a single countersink to provide secure, repeatable clamping when matched to ISO-compatible holders. What are the advantages of the AH725 grade? AH725 is a PVD-coated, break-resistant carbide grade that provides broad material coverage and reliable edge behaviour, improving process security in varied turning applications with reduced risk of unexpected edge failure. What surface finish can be expected with a 0.2 mm radius? A 0.2 mm corner radius is suited to achieving finer surface finishes during finishing passes while maintaining sufficient edge strength for light to moderate cutting depths. Is this insert suitable for internal turning operations? Yes, the geometry and chip control of the CCMT060202 make it appropriate for both external and internal turning, provided the holder and tool overhang are selected to maintain rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com