TPMT 110302 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of consistent edge stability, reliable chip control and simple holder compatibility for uninterrupted turning operations; order directly via Metav Werkzeuge or consult our specialists for process integration. TPMT 110302 AH8015 — ISO triangular indexable insert for turning, 0.2 mm radius, PVD-coated carbide by Tungaloy The TPMT110302-TSF AH8015 is an ISO‑standard triangular indexable insert engineered for external and internal turning of heat‑resistant alloys and general turning operations PVD-coated carbide grade AH8015 0.2 mm corner radius for precise finishes TSF chipbreaker for reliable chip control 60° triangular insert with cylindrical hole Consistent machining of heat‑resistant alloys with balanced wear and edge strength The PVD‑coated AH8015 grade combines wear resistance and edge stability to suit the general machining of heat‑resistant alloys. With a balanced coating‑substrate pairing, the insert offers predictable flank and crater wear behaviour that supports longer tool life without compromising surface integrity. This translates into fewer insert changes and steadier cycle times in batch and single‑piece production, improving throughput and reducing unscheduled downtime. Geometry and dimensions designed for precision and holder compatibility The insert’s 0.2 mm corner radius and 3.18 mm thickness deliver a compact cutting geometry that promotes repeatable part contours and fine surface finishes. The 60° triangle form and standard ISO designation ensure compatibility with a wide range of external holders and boring bars; retention depends on form, clearance angle, tolerance class, fixing method, size and thickness. Clear specification of these dimensions supports correct holder selection and secure clamping, avoiding seating errors that would otherwise affect tool life and component quality. Reliable chip control and surface quality from the TSF breaker Equipped with the TSF chipbreaker, the insert channels chips predictably during turning of ductile and heat‑resistant materials, reducing chip entanglement and improving coolant access at the cutting zone. The chip control feature directly benefits surface finish and process reliability: consistent chips lower the risk of rework, while stable cutting conditions help maintain dimensional accuracy over longer runs. For many workshops, this means fewer cycle interruptions and more consistent output. Seamless integration into productive turning systems As an ISO‑standard triangular indexable insert, this grade fits established system assemblies comprising insert, appropriate external holder or boring bar, support shim/clamp set and replacement screws. The standardised interface simplifies stocking and rapid replacement, supporting lean inventory practices. For facilities aiming for process security and predictable performance, the combination of PVD coating, carbide substrate and standard geometry reduces qualification effort and enables faster tool trials. Contact Metav Werkzeuge for tailored recommendations on integrating Tungaloy inserts into production and to discuss the TPMT 110302 AH8015’s suitability for specific materials and holders — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6951475 SKU: 6951475-Tungaloy Manufacturer article number: 6951475 Manufacturer SKU: TUN6951475 Model series: ISO-Drehwendeschneidplatten Item name: TPMT110302-TSF AH8015 Core dimensions Size (inscribed circle): 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 11° Insert angle: 60° Features & applications Shape: triangular Hole: cylindrical hole + single‑sided countersink (40°–60°) Chipbreaker: TSF Grade/coating: AH8015, PVD‑coated carbide Application: Turning Material: Carbide (Hartmetall) FAQ What materials is this insert best suited for? The TPMT110302-TSF AH8015 is specified for the general machining of heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for such materials. Is the insert compatible with standard ISO triangular holders? Yes. The ISO designation and the 60° triangular form make the insert compatible with standard external holders and boring bars that match size, thickness and fixing method. How does the TSF chipbreaker affect machining? The TSF chipbreaker promotes predictable chip formation and evacuation during turning, which improves surface finish and reduces chip‑related interruptions in the turning process. Can this insert be used for internal turning as well as external turning? Yes. The ISO design and geometry are suitable for both external and internal turning operations, provided a compatible boring bar or internal holder is used. What inspection points ensure correct clamping of the insert? Check holder form, clearance angle, tolerance class, fixing method, size and thickness; correct mating of these parameters ensures secure seating and repeatable performance with the TPMT110302-TSF AH8015. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8015 for temperature resistance, a 0.2 mm corner radius for precise finishes and ISO compatibility for seamless holder integration to keep production stable and efficient. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. TPMT 110302 AH8015 ISO turning insert for turning — Tungaloy TPMT 110302 AH8015 is a PVD-coated carbide ISO insert engineered for ISO-compliant external and internal turning of heat-resistant alloys, offering a balance between wear resistance and cutting-edge stability. ISO triangle insert for turning, 60° included angle PVD-coated carbide grade AH8015 for heat-resistant alloys 0.2 mm corner radius for precise finish Cylindrical hole with single-sided countersink 40°–60° Consistent tool life and efficient machining of high-temperature alloys The PVD-coated carbide AH8015 grade delivers a measured balance between wear resistance and edge stability, making it well suited to continuous machining of heat-resistant alloys. The coating reduces adhesion and thermal degradation at elevated cutting temperatures, which translates into longer tool life and fewer indexings. For production runs where predictable tool performance and repeatable surface quality are required, this insert helps to lower downtime and boost overall process efficiency. The combination of coating and substrate ensures consistent removal rates and a reliable compromise between economy and performance. Secure clamping and ISO compatibility to reduce setup time Designed to ISO geometry, the insert fits into standard clamping systems when matched by form, clearance, tolerance, mounting and thickness. The cylindrical hole with single-sided countersink (40°–60°) enables secure fastening and repeatable seating in compatible holders, contributing to positional accuracy and reduced chatter. Because compatibility depends on matched holder parameters, selecting the correct seat and replacement screws within the system avoids rework and accelerates changeover—an advantage in mixed-batch environments where rapid, repeatable setup is essential. Precision finishes and stable chip control for reliable surfaces A 0.2 mm radius at the cutting edge combined with an included angle of 60° gives a controllable contact geometry that supports finer surface finishes on external and internal contours. The TM chipformer is optimised for chip control on ductile and temperature-resistant materials, minimising entanglement and enabling consistent evacuation. Together, these features reduce the need for secondary finishing and support higher first-pass yield rates, which is particularly valuable where component tolerances and surface integrity are critical. System approach for practical shop-floor integration The insert is intended to operate as part of a system comprising the ISO insert, a suitable external holder or boring bar, a seating/clamp set and replacement screws. Its 3.18 mm thickness and 11° clearance help maintain cutting stability in moderate to heavy cuts while the triangular form provides three usable edges per indexation. For workshops seeking adaptability, this geometry supports a range of turning tasks with simplified inventory management, because one insert type covers multiple turning operations when combined with the correct holder and cutting data. Contact Metav Werkzeuge for expert advice on integrating Tungaloy turning inserts such as the TPMT 110302 AH8015 into existing tool systems and to secure reliable supply and technical support Technical data Article number: 6951488 Manufacturer SKU: TUN6951488 SKU: 6951488-Tungaloy Model series: ISO turning indexable inserts Name: TPMT110302-TM AH8015 Facts Grade: AH8015 Material: Carbide Coating: PVD Corner radius: 0.2 mm Included angle: 60° Clearance angle: 11° Thickness: 3.18 mm Size: 11 mm Hole: cylindrical hole with single-sided countersink (40°–60°) Special features Chipbreaker: TM Shape: triangular Application: external and internal turning Compatible with ISO holders (form, clearance, tolerance, mounting) System components: insert, holder/boring bar, seat/clamp set, replacement screws FAQ What materials is this insert best suited for? The TPMT110302-TM AH8015 is optimised for the general machining of heat-resistant alloys; its PVD-coated carbide composition provides improved thermal resistance and controlled wear when cutting demanding materials. Which holder characteristics are required for correct fitment? Correct fitment requires an ISO-compliant holder that matches the insert form, clearance angle, tolerance class, mounting method, size and thickness; the TPMT110302-TM must be used with the appropriate seat and fastening hardware to ensure repeatable clamping. What surface finish can be expected with this geometry? With a 0.2 mm corner radius and 60° included angle, the insert supports good surface finishes on external and internal features when combined with suitable feeds and cutting parameters; chip control from the TM chipformer further stabilises the process. How does the TM chipbreaker affect machining? The TM chipbreaker is designed to manage chips on ductile and temperature-resistant materials, promoting short, controllable chips and reducing risk of entanglement, which contributes to safer, more productive turning cycles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of proven Tungaloy carbide technology and an ISO-standard geometry for predictable tool life and consistent chip control; order the insert directly via Metav Werkzeuge or contact our consultants for application support. TPMT 110302 GH730 TPMT — ISO triangular turning insert for turning, 11° clearance by Tungaloy A TPMT110302-PF GH730 triangular indexable insert designed for external and internal turning applications, combining a wear-resistant cemented carbide grade with a PF chipbreaker for controlled swarf and stable cutting conditions ISO-standard triangular insert, chipbreaker PF Tungaloy grade GH730 for wear resistance 11° clearance angle, 0.2 mm corner radius 11 mm inscribed circle, thickness 3.18 mm Consistent cutting performance through an optimised carbide grade The insert uses a cemented carbide substrate in the Tungaloy GH730 grade, which combines wear resistance with sufficient toughness to maintain cutting-edge stability under interrupted or continuous cuts. As an indexable turning insert, the result is predictable flank wear and longer intervals between index and replacement, reducing unplanned downtime. The GH730 chemistry and heat treatment are tuned to sustain productive metal removal rates while preserving edge integrity on a wide range of turning tasks. Geometry and clamping features that support repeatable accuracy The triangular TPMT shape with a 11 mm inscribed circle and a 3.18 mm plate thickness provides a robust contact area for common external holders and boring bars. The 11° clearance angle and 0.2 mm corner radius aid in controlling cutting forces and surface finish, while the central hole with a cylindrical bore and a single-sided countersink (40°–60°) enables secure clamping and straightforward replacement. Compatibility with a toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness — choose the matching holder and clamping set for best results. Versatile application and improved chip control for reliable process results Equipped with a PF chipbreaker, the insert excels in producing short, manageable chips in many turning scenarios, which simplifies chip evacuation in both external and internal turning. The geometry and grade pairing allows selection of the appropriate chipbreaker and cutting parameters according to material, machining type and stability of the set-up. This leads to higher process reliability, better surface quality and efficient machining cycles in batch production or single-part manufacture. For applications requiring robust performance and predictable tool life, specify the Tungaloy TPMT110302-PF GH730 through Metav Werkzeuge and request tailored cutting recommendations or delivery details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6821016 SKU: 6821016-Tungaloy Manufacturer SKU: TUN6821016 ISO designation: TPMT110302-PF Model series: ISO turning indexable inserts Material: Cemented carbide Data Inscribed circle: 11 mm Corner radius: 0.2 mm Plate thickness: 3.18 mm Clearance angle: 11° Included angle: 60° Manufacturer article number: 6821016 Special features Triangular insert geometry Chipbreaker: PF Hole: cylindrical bore + single-sided countersink (40°–60°) Grade: GH730 (Tungaloy carbide grade) Application: External and internal turning Compatibility factors: form, clearance angle, tolerance class, fastening, size, thickness FAQ What materials is this insert intended for? The TPMT110302-PF GH730 insert is designed for turning operations where the Tungaloy GH730 grade provides a balance of wear resistance and toughness; selection of chipbreaker and cutting data should match the workpiece material and machining conditions. How does the PF chipbreaker affect machining? The PF chipbreaker on the TPMT110302-PF promotes controlled chip formation and easier evacuation, which supports stable cutting and improved surface quality in many turning tasks. Which holder features are required for correct fitment? Proper fitment requires a holder matching the insert form, clearance angle (11°), tolerance class, fastening type and the insert’s size and thickness; the central hole with countersink secures the insert in standard clamping systems. Can this insert be used for internal turning (boring)? Yes, the insert’s geometry and chip control are suitable for internal turning when used in a compatible boring bar and set-up that provides adequate rigidity. What is the benefit of the 0.2 mm corner radius? A 0.2 mm corner radius balances edge strength with the ability to achieve fine surface finishes; it reduces the risk of edge chipping compared with a sharper radius while maintaining reasonable cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 NS9530 PSF Wendeplatten - Tungaloy
Take advantage of the combination of a finishing-grade cermet, a sharp cutting edge and precise ISO geometry for consistent surface quality and low cutting forces; order directly via Metav Werkzeuge or consult our technical team for application advice. TPMT110302-PSF NS9530 — TPMT 110302 finishing ISO turning insert for Turning, Tungaloy The TPMT110302-PSF NS9530 is an ISO triangular turning insert engineered for finishing operations on steel, offering a sharp cutting edge and a chipbreaker suited to continuous cuts and small depths of cut. Finishing-grade uncoated cermet NS9530 Sharp cutting edge for fine surfaces Suitable for continuous cuts and small depths ISO triangular form with 60° cutting angle Consistent finishing with a low cutting-force profile The insert is produced in an uncoated cermet grade (NS9530) developed for finishing steel; cermet combines ceramic hardness with metallic toughness, so the edge remains sharp while thermal resistance reduces built-up edge. The result is low cutting forces and a high surface finish, which decreases downstream polishing or rework. For customers less familiar with cutting materials: cermet is ideal where a fine surface and consistent dimensional control are priorities because it keeps a defined edge profile across multiple indexing cycles. Geometry and mounting ensure predictable compatibility Designed as an ISO triangular insert with a 60° cutting angle and an 11° clearance angle, the geometry supports stable external and internal turning. Compatibility with a toolholder depends on form, clearance angle, tolerance class, fastening and thickness; the insert includes a centre cylindrical hole with a single-side countersink (40°–60°) to match standard clamping systems. The 3.18 mm thickness and 11 mm size provide a compact footprint while the 0.2 mm corner radius helps preserve edge strength during light finishing passes. Process benefits for efficient finishing applications The PSF chipbreaker is tailored to continuous cuts and small depths of cut, promoting smooth chip flow and reducing vibration in stable setups. Using this grade in finishing cycles improves cycle-to-cycle reproducibility and surface integrity, which supports higher productivity in serial production. The insert fits into a system comprising an indexable insert, a matching external holder or boring bar, a shim/clamp set and replacement screws; this modular approach simplifies tool changes and reduces machine downtime while maintaining process reliability. For reliable finishing of steel components, request the Tungaloy TPMT110302-PSF NS9530 through Metav Werkzeuge or contact Metav Werkzeuge’s technical advisers at info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations. Technical Data Article number: 6998533 SKU: 6998533-Tungaloy Manufacturer SKU: TUN6998533 Designation: TPMT110302-PSF NS9530 Grade: NS9530 Cutting material: uncoated cermet Chipbreaker: PSF Manufacturer: Tungaloy Numbers / Core technical data Cutting angle: 60° Clearance angle: 11° Thickness: 3.18 mm Insert size: 11 mm Corner radius: 0.2 mm Hole style: cylindrical hole + single-side countersink (40°–60°) Designs / Special features ISO triangular insert For turning (external and internal) Suitable for continuous cuts and small depths of cut Sharp cutting edge for finishing steel Integrated centre hole for standard clamping Part of ISO turning indexable insert system FAQ What materials is this insert intended for? The Tungaloy TPMT110302-PSF NS9530 is a finishing-grade insert optimised for steel; the uncoated cermet composition provides low cutting forces and an excellent surface finish on continuous finishing passes. Can the insert be used for internal as well as external turning? Yes; the ISO triangular geometry and the specified hole and clearance details make the insert suitable for both external and internal turning when paired with an appropriate holder. How does the PSF chipbreaker affect chip control? The PSF chipbreaker promotes controlled chip formation during continuous cuts and smaller depths of cut, supporting stable machining and consistent surface quality with reduced risk of vibration. Which dimensions are critical when selecting a compatible holder? Holder compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; for this insert key dimensions are 11 mm size, 3.18 mm thickness and the central hole with countersink. Is the cutting material coated? No; this grade is an uncoated cermet, chosen to preserve a sharp cutting edge and deliver superior surface finish in finishing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 NS9530 Wendeplatten - Tungaloy
The provided product data contains inconsistent information that prevents a reliable product description. In one place the tool substrate is indicated as cemented carbide, while elsewhere it is described as an uncoated cermet; these are distinct cutting-material classes with different cutting behaviour, coatings and recommended applications. Because the substrate directly affects recommended feeds, speeds, chip control and suitable workpiece materials, a definitive technical and commercial text cannot be generated from the current dataset. Please supply a corrected, consistent specification indicating the precise substrate and grade (for example whether the item is a cermet finishing grade NS9530 or a carbide grade), or confirm which entry is authoritative. Once the material designation is clarified, a full product description, technical data and application guidance can be produced immediately. For assistance or to submit corrected data, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930.
TPMT 110302 NS9530 Wendeplatten - Tungaloy
Efficient finishing with a sharp, uncoated cermet NS9530 and a small corner radius delivers low cutting forces and consistently excellent surface quality; the ISO triangular geometry and standard mounting hole ensure reliable clamping and simple integration into existing turning systems. Order the TPMT110302 insert directly via Metav Werkzeuge or ask our consultants if needed. TPMT110302 NS9530 Tungaloy insert — ISO triangular insert for turning, 60° TPMT110302 NS9530 is an ISO triangular, uncoated cermet insert designed for fine finishing in turning applications on steel. Sharp cermet grade NS9530 for fine finishing Low cutting forces for continuous turning ISO triangular insert, 3.18 mm thick Cylindrical hole with single-sided countersink Superior finishing performance for steel turning The uncoated cermet grade NS9530 is formulated for finishing cuts where a sharp edge and low deformation are paramount. With a fine, sharp cutting edge and a small 0.2 mm corner radius, the insert reduces cutting forces and heat generation, which in turn improves surface quality and reduces rework. For production environments that require consistent part finish on turning operations, this insert offers a measurable improvement in cycle stability and reduced micro-chatter during continuous cutting. Straightforward integration into ISO holder systems The insert is supplied in the ISO triangular format and is secured via a cylindrical hole with a single-sided countersink (40°–60°), enabling compatibility with a wide range of ISO triangular holders and boring bars. Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the 11° clearance angle and 3.18 mm plate thickness are industry-standard values that simplify holder selection. For complete system assembly, include a matching outer holder or boring bar, the correct shim or clamping set, and replacement screws to maintain repeatable clamping accuracy. Operational advantages and recommended applications This finishing grade is optimised for continuous cutting and small depths of cut, making it particularly suitable for external and internal turning where a premium surface finish is required. The single-sided chipbreaker helps to form and control chips for stable evacuation in uninterrupted cuts. The insert supports efficient productivity by lowering cutting forces and extending time between index changes. For predictable performance, choose holders and cutting parameters that match the insert’s geometry and the workpiece material; the NS9530 grade excels on common steel grades and is intended for applications prioritising surface integrity over aggressive metal removal. For precision finishing with Tungaloy’s NS9530 cermet insert, contact Metav Werkzeuge for tailored application advice and rapid supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6998524 Manufacturer SKU: TUN6998524 Seller SKU: 6998524-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Application: Turning Grade: NS9530 Facts ISO designation: TPMT110302 Insert thickness: 3.18 mm Inscribed circle: 11 mm Corner radius: 0.2 mm Clearance angle: 11° Included hole style: cylindrical hole + single-sided countersink (40°–60°) Geometry angle: 60° Special features Uncoated cermet cutting material Single-sided chipbreaker Triangular insert form Compatibility requires matching holder form, fastening and tolerance class FAQ What materials is this insert suitable for? The TPMT110302 NS9530 insert is optimised for turning steel in finishing operations and performs best in continuous cuts with small depths of cut. What are the key geometry and size specifications? The insert is a triangular ISO type with a 60° geometry, 11 mm inscribed circle, 3.18 mm thickness and a 0.2 mm corner radius; it features a cylindrical hole with a single-sided countersink. SKU: 6998524-Tungaloy. Which holders are compatible with this insert? Compatibility follows ISO triangular standards; selection depends on the holder’s form, 11° clearance, tolerance class, fastening method, size and thickness to match the TPMT110302 mounting features. Is the insert coated? No, the TPMT110302 uses an uncoated cermet grade (NS9530), providing a sharp edge for superior surface finish in finishing applications. For which turning operations is this insert recommended? The insert is recommended for external and internal finishing turns, especially in continuous cutting where low cutting forces and improved surface integrity are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 NS9530 Wendeplatten - Tungaloy
A high-performance finishing insert combining the NS9530 uncoated cermet grade with a precise 0.2 mm corner radius for outstanding surface quality and low cutting forces. ISO compatibility and a secured mounting via the cylindrical hole with countersink support predictable indexable insert changes. Order original Tungaloy inserts through Metav Werkzeuge or consult the specialists for application support. TPMT110302-TM NS9530 ISO triangle indexable turning insert — cermet finishing grade, 0.2 mm radius (Turning) by Tungaloy The TPMT110302-TM NS9530 is an ISO-standard triangle indexable insert engineered for precision external and internal turning, delivering a sharp cutting edge and excellent surface finish in steel finishing applications. ISO-standard triangle insert for turning Cermet grade NS9530 for superior surface finish Sharp cutting edge for low cutting forces 0.2 mm corner radius for fine detail Precision finishing with cermet for superior surface quality The uncoated cermet grade NS9530 is formulated as a finishing grade for machining steel, offering a consistently sharp cutting edge that reduces friction and burr formation. In continuous cutting conditions and small depth-of-cut operations this composition supports lower vibration and improved surface integrity, which translates into fewer finishing steps and less rework. The combination of a finely honed edge and the insert geometry produces a reliably high surface finish, making the insert particularly suitable where component tolerances and appearance matter. ISO compatibility and secure clamping for predictable indexing Designed to the ISO indexable insert system, the triangular form and the central hole with a one-sided countersink ensure repeatable positioning in suitable holders. The insert features a defined 11° clearance and a 3.18 mm plate thickness, matched to standard clamping systems; compatibility depends on holder form, free angle, tolerance class, fastening method, size and thickness. The moderate 0.2 mm corner radius balances edge strength with the ability to produce fine detail, while the cylindrical hole and countersink (40°–60°) provide solid seating and controlled torque transfer during clamping for predictable changeovers. Process efficiency and longer stable tool life in finishing tasks A finishing-specific uncoated grade promotes low cutting forces, which reduces tool–workpiece interaction and helps maintain a stable cutting edge under continuous feed. That stability supports higher effective productivity through consistent part quality and reduced scrap rates. The sharp cutting edge characteristic of NS9530 lowers the energy required per cut, yielding economical machining for serial finishing operations and reducing cycle-time variability in production environments. Practical machining notes for reliable results For best results in finishing steel components, employ modest depths of cut and steady feed rates to preserve the cutting edge and maintain surface quality. The chipbreaker TM geometry is optimised for continuous chips and small material removal, improving chip control without compromising finish. Ensure correct seating in an ISO-compatible triangular holder and apply manufacturer-recommended clamping torque to avoid insert movement. Regular indexing of the insert when wear appears will maintain part quality and extend overall tool life. For original Tungaloy TPMT110302-TM NS9530 inserts and tailored application advice, order via Metav Werkzeuge or contact the technical team at info@metav-werkzeuge.com / +49 2822 7131930 for support Technical data Article number: 6951489 Manufacturer SKU: TUN6951489 SKU: 6951489-Tungaloy Designation: TPMT110302-TM NS9530 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Facts Angle: 60° Corner radius: 0.2 mm Clearance (free) angle: 11° Plate thickness: 3.18 mm Plate size: 11 ISO code: 110302 Hole: with hole Special features Material: cemented carbide Grade: uncoated cermet NS9530 Chipbreaker: TM Application: Turning — external and internal Optimised for continuous cuts and small depths Hole style: cylindrical hole + one-side countersink (40°–60°) FAQ What materials is this insert suitable for? The TPMT110302-TM NS9530 insert is a finishing-grade uncoated cermet optimised for steel machining and is particularly effective in continuous cutting and small-depth finishing operations. How does the chipbreaker TM influence performance? The chipbreaker TM promotes controlled chip formation in finishing cuts, improving chip evacuation and maintaining surface integrity when machining steel with the NS9530 grade. Is the insert compatible with standard ISO triangular holders? Yes, the insert conforms to ISO indexable insert standards; compatibility requires a matching holder geometry, correct clearance angle, tolerance class and clamping arrangement. What benefits does the 0.2 mm corner radius provide? A 0.2 mm radius delivers a balance between a sharp cutting edge for fine surface finish and sufficient edge strength to resist minor edge wear during finishing passes. How should the insert be clamped for best repeatability? Secure seating using the cylindrical hole and countersunk fixing, combined with the correct clamping torque, ensures repeatable positioning and predictable changeovers for the TPMT110302-TM NS9530 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 NS9530 Wendeplatten - Tungaloy
Take advantage of the sharp cutting geometry and low cutting forces of the NS9530 finishing grade for consistent high-quality turning results; the triangular ISO insert delivers stable surface finishes in continuous cuts. Order the TPMT110302 NS9530 directly via Metav Werkzeuge or consult our advisers for application-specific selection. TPMT 110302 NS9530 Tungaloy indexable insert – finishing insert for turning, uncoated cermet, 60° A TPMT 110302 NS9530 is an ISO-compliant triangular indexable insert designed for precision finishing in turning applications, offering a sharp cutting edge and low cutting forces for superior surface quality on steel components. Uncoated cermet grade NS9530 Sharp cutting edge for high surface finish 60° triangular insert, 0.2 mm corner radius Cylindrical hole with 40°–60° countersink Consistent finishing with low cutting forces for improved surface quality The insert’s uncoated cermet composition and finely honed geometry provide a sharp cutting edge that reduces ploughing and heat build-up during finishing operations. As a result, machining of steels under continuous cutting conditions benefits from reduced cutting forces and a markedly higher surface finish, which in turn minimises subsequent polishing or rework. The combination of material and geometry is particularly effective where small depths of cut and fine feeds are employed to achieve tight surface roughness values. Designed for reliable assembly and ISO-based compatibility to reduce setup time Constructed to the ISO triangle specification, this plate features a 60° included angle and a standard mounting hole with a cylindrical bore plus one-sided countersink (40°–60°), ensuring compatibility with a wide range of external holders and boring bars. The standardised form, clearance angle and tolerance classification simplify toolholder selection and replacement, facilitating predictable clamping and repeatable positioning. The result is reduced setup time and greater process stability in batch production. Optimised chip control and performance in continuous turning Equipped with a single-sided chipbreaker, the insert channels chips predictably during continuous cuts and small depth passes, improving evacuation and reducing risk of built-up edge formation. The small 0.2 mm corner radius supports gentle engagement with the workpiece, preserving the sharp cutting edge while enabling fine edge definition, which is essential for demanding finishing passes where dimensional and visual quality are critical. Material guidance and recommended process windows for finishing steel The grade NS9530 is specified as a finishing sort for steel, offering balanced wear resistance and edge strength for sustained finishing performance. Use in continuous cutting with light to moderate feeds and shallow depths is recommended for best surface integrity. Selection of a matching chipbreaker and appropriate holder rigidity will further extend tool life and ensure consistent results when machining a range of steels under stable conditions. For expert application advice or to order the TPMT110302 NS9530 finishing insert from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support and delivery coordination Technical data Article number: 6951470 SKU: 6951470-Tungaloy Manufacturer SKU: TUN6951470 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten ISO designation: TPMT110302 Facts Angle: 60° Free angle: 11° Corner radius: 0.2 mm Thickness: 3.18 mm Size: 11 Design & special features Uncoated cermet (NS9530) Cemented carbide substrate Triangular plate, 3 cutting edges per corner depending on indexing Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Intended use: turning (finishing) on steel Sharp cutting edge, low cutting forces FAQ Which materials is this insert intended for? The TPMT110302 NS9530 is specified as a finishing grade for steel; the uncoated cermet composition is optimised for continuous turning operations on various steel grades. What is the corner radius and how does it affect finishing? The insert has a 0.2 mm corner radius, which supports fine edge definition and reduced cutting forces for high-quality surface finishes during light finishing cuts. Is the insert coated? No, the NS9530 grade is an uncoated cermet finishing sort; this promotes a very sharp edge for superior surface quality in the recommended application range. How does the hole geometry support secure clamping? The plate features a cylindrical hole with a one-sided countersink (40°–60°), providing standardised seating and reliable clamping when paired with compatible ISO holders and clamping kits. Which chipbreaker should be chosen for continuous cuts? A single-sided chipbreaker is integrated for improved chip control in continuous turning; selection should be matched to material and feed to maintain stability and chip evacuation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 T6215 PS Wendeplatten - Tungaloy
High wear resistance from the T6215 grade plus a 0.2 mm nose radius deliver consistent surface quality and extended tool life; compatibility with ISO turning systems ensures reliable clamping and quick changeover. Order the TPMT110302-PS T6215 directly via Metav Werkzeuge or consult our specialists for application-specific advice. TPMT110302-PS T6215 ISO turning insert — triangular insert for turning of rostfreier Stahl (Tungaloy) The TPMT110302-PS T6215 is an ISO-standard triangular turning insert engineered for external and internal turning of rostfreier Stahl under stable to mildly interrupted cutting conditions. CVD-coated carbide T6215 for wear resistance Optimised for rostfreier Stahl turning 0.2 mm nose radius for precision finishes Compatible with ISO turning holders Deliver consistent performance with a wear-resistant grade The CVD-coated carbide grade T6215 provides high wear resistance, which reduces edge deterioration during continuous turning of rostfreier Stahl and supports predictable tool life. The chemical vapour deposition (CVD) layer increases hardness at elevated temperatures and improves abrasive wear resistance; this means fewer index changes and more uptime on production batches. For operations prioritising cycle-time stability and reproducible surface finish, the combination of a robust substrate and CVD surface treatment offers a clear efficiency advantage. Precise geometry for surface finish and cutting stability The insert’s 0.2 mm nose radius and 11° relief create a balance between fine surface finish and cutting-edge strength. A small nose radius improves finish quality while keeping cutting forces moderate, which is beneficial when machining rostfreier Stahl that tends to work-harden. The triangular 60° geometry provides three usable cutting edges per index and good rigidity in the holder; the insert’s cylindrical hole with single-sided countersink (40°–60°) ensures secure clamping and correct seating, reducing vibration and edge movement during the cut. These geometry choices translate into predictable part tolerances and fewer reworks. System compatibility and practical application guidance This item is part of the ISO-series of turning inserts and is intended to be used together with a matching external holder or boring bar, an underlay/shim and appropriate clamping hardware. The PS chipbreaker is tailored for chip control when turning rostfreier Stahl under stable to lightly interrupted conditions; selecting the correct chipbreaker and grade according to workpiece material and setup stability is essential for consistent chip formation. Typical applications include external turning and internal boring; when machine dynamics are less stable, consider an alternative chipbreaker or a more robust clamping arrangement to maintain process reliability. For production-focused turning using the Tungaloy T6215 grade, contact Metav Werkzeuge for stock confirmation or tailored recommendations — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951467 SKU: 6951467-Tungaloy Manufacturer SKU: TUN6951467 Label: TPMT110302-PS T6215 Manufacturer: Tungaloy Numbers / Core technical data Thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 11° Insert size: 11 Included angle: 60° ISO code: 110302 Designs / Special features CVD-coated carbide, grade T6215 PS chipbreaker Triangular insert form Cylindrical hole + single-sided countersink (40°–60°) With hole for secure clamping ISO-standard turning insert Application: turning of rostfreier Stahl FAQ What materials is this insert suitable for? The TPMT110302-PS T6215 is formulated for machining of rostfreier Stahl; the CVD-coated T6215 grade is optimised for wear resistance when turning these materials. Which operations are recommended for this insert? This triangular insert from Tungaloy is recommended for external and internal turning; the PS chipbreaker supports controlled chip formation under stable conditions. How is the insert clamped in the holder? The TPMT110302-PS has a cylindrical hole with a single-sided countersink (40°–60°) and is designed for ISO-standard holders with matching form, clearance and tolerance class to ensure secure seating. What surface finish can be expected with a 0.2 mm radius? A 0.2 mm nose radius on the TPMT110302-PS gives a fine surface finish while maintaining adequate edge strength; for heavier cuts or interrupted cuts a larger radius may be preferable. When should an alternative chipbreaker be chosen? If machine stability is limited or interruptions are frequent, change from the PS chipbreaker to a pattern intended for unstable conditions; the Tungaloy grade remains effective, but chip control must match the system dynamics. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 T6215 TSF Wendeplatten - Tungaloy
Taking advantage of the T6215 CVD-coated carbide and the TSF chipbreaker, this insert delivers consistent cutting performance and controlled chip formation for stainless-steel turning; the compact 0.2 mm corner radius supports fine surface finish. Order the TPMT110302-TSF T6215 insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. TPMT 110302 T6215 — ISO triangular turning insert by Tungaloy, CVD-coated carbide A TPMT 110302 T6215 triangular indexable insert designed for turning applications, optimised for stainless-steel machining under stable to slightly interrupted cutting conditions. CVD-coated carbide grade T6215 TSF chipbreaker for controlled chips ISO triangular insert, 0.2 mm corner radius 3.18 mm thickness for high rigidity Consistent cutting for stainless-steel turning with reduced wear The insert combines a CVD-coated surface with a wear-resistant T6215 grade to extend edge life when machining stainless steel. The TSF chipbreaker promotes short, segmented chips that reduce entanglement and improve process reliability, especially in steady feed conditions. With a fine 0.2 mm corner radius, the geometry supports improved surface finish on external and internal profiles while maintaining stable cutting forces. These technical choices translate into predictable tool behaviour and fewer interruptions to production, aiding throughput and component conformity. Secure mounting and system compatibility for predictable results Compatibility within the ISO insert system is determined by shape, relief angle, tolerance class, fastening and thickness; this indexable triangle conforms to ISO geometry 110302, with a 60° included angle and 3.18 mm thickness to ensure robust clamping in a matched holder. The insert’s cylindrical hole with one-sided countersink (40°–60°) secures repeatable seating and torque distribution, lowering the risk of movement during interrupted cuts. Clear specification of these parameters simplifies holder selection and reduces set-up time, enabling stable machining and consistent component quality. Improved productivity through controlled chip formation and stable edge life By combining a modern coating with a carbide substrate optimised for stainless steels, the insert reduces flank wear and maintains edge integrity over longer tool paths; this supports longer tool cycles and fewer index changes. The triangular shape with a small corner radius allows multiple index positions, enhancing cost-effectiveness per insert. Selecting the appropriate chipbreaker and grade for the workpiece and cutting conditions permits higher process stability and a better surface finish, which in turn reduces downstream grinding or polishing steps and contributes to overall manufacturing efficiency. Contact Metav Werkzeuge for tailored machining advice or to specify the TPMT110302-TSF T6215 insert for stainless-steel turning: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6951473 Manufacturer SKU: TUN6951473 Brand SKU: 6951473-Tungaloy Label: TPMT110302-TSF T6215 Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Corner radius: 0.2 mm Thickness: 3.18 mm Size: 11 mm Relief angle: 11° Included angle: 60° ISO code: 110302 Special features Coating: T6215 (CVD-coated) Chipbreaker: TSF Plate shape: triangular Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: Turning FAQ What materials is this insert intended for? The TPMT110302-TSF T6215 insert is designed primarily for machining stainless steel; the T6215 CVD-coated grade gives wear resistance under stable and slightly interrupted cutting conditions. Which chipshape can be expected with the TSF chipbreaker? The TSF chipbreaker produces controlled, short chips suited to reliable evacuation in turning operations, reducing the risk of chip entanglement and improving surface consistency when the insert is used in appropriate feeds and depths. How is compatibility with the toolholder ensured? Compatibility depends on form, relief angle, tolerance class, fastening and thickness; the ISO 110302 geometry, 60° included angle and the cylindrical hole with countersink ensure predictable seating in matched holders. How many index positions are available on this triangular insert? As a triangular indexable insert, multiple index positions are available; the compact 0.2 mm corner radius and robust 3.18 mm thickness support several reindexes before replacement. What is the manufacturer SKU for ordering and reference? The insert is listed under the manufacturer SKU TUN6951473 and the brand SKU 6951473-Tungaloy for purchasing and traceability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 T6215 Wendeplatten - Tungaloy
Combining CVD-coated wear resistance with ISO compatibility and a compact 0.2 mm corner radius ensures stable, repeatable turning of rostfreier Stahl; order the TPMT110302-TM T6215 via Metav Werkzeuge or consult our specialists for application advice. TPMT110302-TM T6215 — ISO turning insert, CVD-coated carbide, triangle, Tungaloy A TPMT110302-TM T6215 is an ISO-format turning insert optimised for external and internal turning of rostfreier Stahl under stable to slightly interrupted cutting conditions CVD-coated carbide grade T6215 ISO triangle shape, 60° cutting angle Designed for turning rostfreier Stahl Cylindrical hole with 40°–60° countersink Consistent wear performance for longer tool life The CVD-coated carbide of grade T6215 provides a high level of wear resistance, which translates into longer tool life and fewer insert changes on demanding turning operations. CVD (chemical vapour deposition) creates a hard, uniform coating that reduces flank wear and protects the substrate during continuous cuts. For shops machining rostfreier Stahl, this means steadier machining parameters and reduced scrap rates. The combination of coating and base grade supports productive chip control while maintaining dimensional stability over extended runs. ISO compatibility reduces setup complexity and downtime As an ISO-standard insert with a 60° included angle and a 11° clearance, the triangular design simplifies selection and replacement across common toolholders. The insert’s form, size and thickness determine holder compatibility; the TPMT family fits standard external holders or boring bars when the inscribed circle and clamping geometry match. The 0.2 mm corner radius delivers a balance between edge strength and surface finish, while the 3.18 mm plate thickness offers stability. Clear labelling and ISO conformity help reduce setup errors and shorten machine downtime. Application guidance for reliable results Designed primarily for turning, the TM chipbreaker and the T6215 grade are matched to stable to slightly interrupted cuts on rostfreier Stahl. Choose a chipbreaker and grade aligned with the workpiece material and rigidity of the setup: the TM chipformer aids chip control in continuous turning, and the compact corner radius supports fine surface finishes and dimensional precision. The insert’s cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and repeatable seating in compatible holders, supporting consistent machining performance and operator confidence. For application-specific recommendations or to secure genuine Tungaloy TPMT110302-TM T6215 inserts with prompt availability, contact Metav Werkzeuge for expert advice and ordering support. Technical data Article number: 6951480 SKU: 6951480-Tungaloy Manufacturer SKU: TUN6951480 Designation: TPMT110302-TM T6215 Material: Hartmetall Core data Inscribed circle: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Clearance (frewinkel): 11° Included angle: 60° Hole: cylindrical with 40°–60° countersink Special features CVD-coated carbide, grade T6215 TM chipbreaker for chip control ISO-format triangular insert Suitable for external and internal turning Intended for rostfreier Stahl under stable to slightly interrupted cuts System components: matching external holder or boring bar, clamp set and spare screws FAQ What materials is this insert suitable for? The TPMT110302-TM T6215 is specified for machining rostfreier Stahl and is supplied in a CVD-coated T6215 grade optimised for wear resistance in those applications. Which toolholders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, clamping method, inscribed circle and thickness; the insert is ISO-formatted for standard triangular external holders and boring bars. What does the TM chipbreaker provide? The TM chipbreaker promotes reliable chip control in continuous turning, improving surface finish and reducing the risk of chip entanglement in stable setups. How does the corner radius affect machining? A 0.2 mm corner radius offers a compromise between edge strength and surface finish, aiding dimensional accuracy on finishing passes while maintaining acceptable edge robustness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T9215 carbide, a TSF chipbreaker and an 11° clearance angle to achieve high productivity and consistent tool life in medium steel turning; order the insert directly via Metav Werkzeuge or request expert advice from the consultants. TPMT110302-TSF T9215 ISO turning insert — CVD-coated carbide, 11° clearance — Tungaloy The TPMT110302-TSF T9215 is an ISO triangular turning insert designed for medium steel turning, offering reliable chip formation and stable cutting performance in continuous to lightly interrupted cuts CVD-coated carbide grade T9215 11° clearance angle for stable cutting 0.2 mm corner radius for versatility Triangular 11 mm insert with central hole Productivity and wear resistance for medium steel turning The combination of a CVD-coated carbide substrate and the T9215 grade delivers a balance of wear resistance and fracture toughness, making the insert particularly suited to productive turning of medium-strength steels. The integrated TSF chipbreaker promotes controlled chip formation, reducing downtime for chip handling and enabling higher cutting speeds under steady cutting conditions. For production environments seeking repeatable cycle times, this specification supports improved throughput while maintaining component quality. Seamless integration into ISO tooling systems As an ISO-series insert, compatibility with holders is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The triangular form with a central cylindrical hole and single-sided countersink (40°–60°) allows secure clamping in a range of external holders and boring bars. The system approach — insert, matching external holder or boring bar, backing pad/clamp set and spare screws — simplifies replacements and reduces setup time, facilitating consistent tool positioning and repeatable results on the shop floor. Practical geometry for versatile machining The insert’s 0.2 mm corner radius and 3.18 mm thickness provide a compromise between edge strength and surface finish capability. The 11 mm inscribed circle size and 11° relief give flexibility for both external and internal turning operations, while the 60° nominal geometry supports stable contact conditions. These geometric choices help deliver a reliable surface finish on turned parts and extend edge life where cuts are continuous or subject to light interruptions. Selecting the right grade and application advice Grade T9215 is recommended as a first choice for mid-range steel machining, combining long tool life with good resistance to edge chipping. For operations with frequent interruptions, heavy interrupted cuts or atypical alloys, consult the technical data on chipbreaker style and holder compatibility to ensure optimal match. Clear documentation of workpiece material, machining strategy and holder type will reduce trial cycles and increase process stability. For application-specific recommendations and to request the Tungaloy TPMT110302-TSF T9215 insert (SKU 6951471-Tungaloy), contact Metav Werkzeuge for tailored advice on holder compatibility and grade selection. Technical data Article number: 6951471 Manufacturer SKU: TUN6951471 SKU: 6951471-Tungaloy Model series: ISO-Drehwendeschneidplatten Name: TPMT110302-TSF T9215 Facts Thickness: 3.18 mm Inscribed circle: 11 mm Corner radius: 0.2 mm Clearance angle: 11° Insert geometry angle: 60° Special features Schneidstofftyp: CVD-coated carbide (T9215) Chipbreaker: TSF Shape: triangular Central hole: cylindrical hole with one-sided countersink (40°–60°) Typical application: external and internal turning System components: ISO insert, compatible external holder or boring bar, backing/clamp set, replacement screws FAQ What materials is this insert best suited for? The Tungaloy TPMT110302-TSF T9215 insert is optimised for medium-strength steel machining; the CVD-coated carbide grade T9215 balances wear resistance and toughness for productive turning. Which chipbreaker is fitted to this insert and what benefit does it provide? The item features the TSF chipbreaker, which promotes stable chip control and reduces interruptions for chip evacuation during continuous to lightly interrupted cuts. How is holder compatibility determined for this ISO insert? Compatibility depends on form, clearance angle (11°), tolerance class, fastening, size and thickness; matching the triangular TPMT geometry and central hole to the correct external holder ensures secure clamping and repeatable positioning. Can this insert be used for internal boring as well as external turning? Yes, the triangular form, 0.2 mm corner radius and 11 mm inscribed circle make it suitable for both external and internal turning applications when paired with an appropriate holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD-coated carbide grade T9215 and a precise 0.2 mm corner radius to combine wear resistance with fracture toughness for reliable mid‑Stahl turning; order genuine inserts directly via Metav Werkzeuge or consult the technical team for application support. TPMT 110302 T9215 – ISO turning insert, CVD‑coated carbide, 0.2 mm radius (Tungaloy) The TPMT110302-TM T9215 is an ISO‑format indexable turning insert engineered for external and internal turning operations, offering high wear resistance and stable cutting performance in medium Stahl machining. ISO triangular insert, 11° clearance CVD‑coated carbide grade T9215 0.2 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Consistent productivity for medium Stahl turning The combination of a CVD coating and a tough carbide substrate in this grade delivers prolonged tool life under continuous to gently interrupted cuts. The T9215 grade is designed as a first choice for mid‑Stahl applications, where steady material removal and reliable edge stability are required; this reduces downtime for insert changes and supports predictable component quality. The integrated chipbreaker TM promotes consistent chip control, so operators achieve repeatable surface finishes while maintaining throughput and reducing rework. Quick integration into ISO tool systems for fast changeovers As an ISO‑standard turning insert with a triangular shape, 11° clearance and a 60° included angle, the insert fits common external holders and boring bars when the holder matches form, clearance and tolerance class. The cylindrical hole with a single‑side countersink (40°–60°) simplifies secure seating and repeatable clamping; the 3.18 mm thickness and size 11 profile provide mechanical stability during heavier cuts. These dimensional and interface features allow seamless retrofit into existing tool systems, shortening setup time and improving overall equipment effectiveness. Practical handling and application guidance For best results in external and internal turning, pair the insert with a suitable ISO‑type holder and select the TM chipbreaker variant that matches the required surface finish and chip shape. The 0.2 mm corner radius favours fine finishing passes and moderate feed rates, while the robust carbide body tolerates steady cutting conditions. Where process certainty is essential, the carbide and coating combination helps maintain edge integrity, enabling predictable tool life and consistent part quality. If further machining parameters or holder compatibility checks are required, Metav Werkzeuge’s advisors are available to guide selection and application. For grade‑specific recommendations and to secure genuine Tungaloy TPMT110302‑TM T9215 inserts, contact Metav Werkzeuge for expert advice and prompt supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951477 SKU: 6951477-Tungaloy Manufacturer SKU: TUN6951477 Manufacturer: Tungaloy Designation: TPMT110302-TM T9215 Numbers Corner radius: 0.2 mm Included angle: 60° Clearance angle: 11° Thickness: 3.18 mm Size: 11 Special features Material: carbide Coating/grade: T9215, CVD‑coated Chipbreaker: TM Shape: triangular Mounting: cylindrical hole with one‑side countersink (40°–60°) Application: turning (external and internal) Model series: ISO turning indexable inserts FAQ What materials is this insert suitable for? The TPMT110302‑TM T9215 is optimised for medium Stahl machining; its CVD coating and carbide substrate balance wear resistance and toughness for consistent performance. How can I ensure the insert fits my holder? Compatibility depends on insert form, free clearance angle, tolerance class, fixation method, size and thickness; check that the ISO form and the TPMT geometry of the TPMT110302‑TM match the holder specifications. What advantages does the T9215 grade provide? T9215 offers a combination of high wear resistance and fracture toughness, making it suitable for productive turning where continuous or lightly interrupted cuts are common. Which chipbreaker is included and what does it do? The insert features the TM chipbreaker, which supports controlled chip formation and evacuation to improve surface finish and reduce the risk of chip‑related interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 110302 T9215 Wendeplatten - Tungaloy
High wear resistance and stable edge strength paired with ISO compatibility and a compact 0.2 mm corner radius support consistent, productive turning operations; order the TPMT 110302 T9215 insert via Metav Werkzeuge or consult the technical team for an application match. TPMT 110302 T9215 TPMT turning insert for Turning — CVD-coated carbide, 11° relief (Tungaloy) The TPMT 110302 T9215 is an ISO triangular turning insert engineered for medium steel machining, delivering a balance of wear resistance and fracture toughness for continuous to lightly interrupted cuts. ISO triangular insert TPMT 110302 T9215 CVD-coated carbide for medium steel 11° relief angle, 0.2 mm corner radius Cylindrical hole with 40°–60° countersink Reliable productivity for medium-steel turning The combination of a CVD coating and a CVD-coated carbide substrate makes this insert particularly suited to the demands of medium steel machining. The chosen grade provides elevated wear resistance while maintaining sufficient fracture toughness, which translates directly into longer tool life and fewer indexings. As the component is manufactured to ISO form, it simplifies tool inventory and shortens changeover times, supporting a steady production flow and consistent part quality. Secure clamping and accurate seating for steady results The insert's geometry includes a cylindrical hole with a single-sided countersink (40°–60°), ensuring confident seating in compatible holders and reducing micro-movements during cuts. With a plate thickness of 3.18 mm and standardised form, the system tolerance and fastening interface deliver reproducible positioning and repeatable runout characteristics. This secure clamping contributes to predictable tool behaviour and fewer scrap parts, improving process reliability in batch and serial production. Geometry tuned for chip control and surface finish The PS chipbreaker and a small 0.2 mm corner radius provide controlled chip formation and reduced cutting forces in finishing and light roughing passes. The 11° relief supports favourable shear conditions at the cutting edge and helps maintain surface integrity, particularly on turned external and internal profiles. Properly matched to cutting conditions, this geometry enables improved surface finishes with reduced risk of built-up edge, especially in continuous to lightly interrupted cutting scenarios. Application guidance for efficient implementation Designed for turning applications, the insert performs best when matched to a holder that respects form, relief angle and tolerance class. Select the PS chipbreaker and grade T9215 for medium steel where a balance between life and productivity is required; the grade is optimised for continuous to light interrupted cuts and supports stable chip formation. For first-time setup, verify holder compatibility and clamping torque, then monitor initial runs to refine speeds and feeds for the specific machine–workpiece combination. For tailored application advice and prompt supply of genuine Tungaloy TPMT 110302 T9215 inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — the team can recommend the best chipbreaker and holder match for the required operation Technical Data Article number: 6951465 Manufacturer SKU: TUN6951465 SKU: 6951465-Tungaloy Label: TPMT110302-PS T9215 Model series: ISO turning inserts Facts Relief angle: 11° Corner radius: 0.2 mm Thickness: 3.18 mm Size (inscribed circle): 11 mm Included angle: 60° Manufacturer article number: 6951465 Special features Grade: T9215 Cutting material: CVD-coated carbide Plate shape: triangular Chipbreaker: PS Hole: cylindrical hole + single-sided countersink (40°–60°) Application: Turning Compatibility: ISO-standard insert form for matching holders and clamping sets FAQ Which materials is this insert best suited for? The Tungaloy TPMT 110302 T9215 insert is optimised for medium steel machining; the T9215 grade balances wear resistance and toughness for productive operation. What does the PS chipbreaker provide? The PS chipbreaker promotes controlled chip formation and lower cutting forces, aiding in achieving consistent surface finish and reduced tendency for built-up edge in continuous to light interrupted cuts. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius gives improved edge stability for finishing passes while limiting cutting forces; it supports a fine surface quality without excessive loading on the insert edge. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO specifications; compatibility depends on form, relief angle, tolerance class, fastening and plate thickness—verify holder matching before use. What benefits does the T9215 grade deliver compared with general-purpose grades? T9215 offers higher wear resistance and good fracture toughness designed specifically for medium steel, enabling longer tool life and steady productivity under continuous machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 T9225 TM Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide and the T9225 universal grade that delivers stable chip formation and extended edge life in medium to heavy steel turning; the ISO conformity and TM chipbreaker enable predictable tool changes and fewer production interruptions. Order the insert via Metav Werkzeuge or consult our specialists for application matching. TPMT 110302 T9225 triangular turning insert by Tungaloy — CVD-coated carbide, TM chipbreaker TPMT110302-TM T9225 is an ISO-standard triangular indexable insert for external and internal turning, designed for robust medium to heavy steel machining and applications with intermittent cuts. CVD-coated carbide for longer edge life Robust universal grade T9225 for steel machining Triangle 60° form for versatile setups 11° relief and 0.2 mm corner radius Consistent, productive cutting with CVD-coated carbide The CVD coating on this carbide grade improves wear resistance while retaining a degree of toughness that is required for variable engagement conditions. The T9225 grade is tuned for medium to heavy steel machining; combined with the TM chipbreaker, it ensures stable chip formation and reliable performance under slightly interrupted cuts. The result is reduced tool change frequency and a more consistent surface finish, which supports steady production throughput and lowers total machining costs. Simple integration into standard toolholders and quick indexability Thanks to the ISO designation 110302 and the triangular 60° geometry, this insert fits a wide range of holders when form, relief angle, tolerance class, clamping and thickness match. The 11° relief and 3.18 mm thickness deliver mechanical stability during heavy passes, while the cylindrical hole with single-side countersink (40°–60°) ensures secure clamping and repeatable seating. This standardisation reduces inventory complexity and enables swift exchange without special adaptors, helping workshops maintain uptime and simplify tool management. Practical selection advice for reliable results For external and internal turning operations where interrupted cuts or varying engagement occur, choose the TM chipbreaker together with the T9225 grade for a balance of toughness and wear resistance. The carbide construction provides thermal and mechanical stability during heavy cuts, while the modest 0.2 mm corner radius supports fine control over edge strength and final geometry. For machining strategies, select feeds and depths that match the insert geometry and the machine's rigidity; Metav Werkzeuge can advise on optimised parameters and compatible holders to achieve consistent outcomes. For material-specific recommendations and availability of the Tungaloy TPMT110302-TM T9225 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide application-focused advice and supply options. Technical data Article number: 6951479 Manufacturer SKU: TUN6951479 SKU: 6951479-Tungaloy Model series: ISO turning indexable inserts Core specifications Shape: triangle 60° Size: 11 Thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 11° ISO designation: 110302 Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Material: carbide Coating / grade: T9225 (CVD-coated) Chipbreaker: TM Application: turning (external and internal) Suitable for medium to heavy steel machining and interrupted cuts Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert designed for? The TPMT110302-TM T9225 insert is specified for medium to heavy steel machining and performs well where slightly interrupted cuts require additional toughness. Which chipbreaker is fitted and what is its purpose? This indexable insert uses the TM chipbreaker, which promotes stable chip control and reduces the risk of built-up edge during demanding turning operations. Is the insert ISO-compatible with common holders? Yes; the ISO designation 110302, triangular 60° form and standard thickness allow compatibility with holders that match form, relief angle, tolerance and clamping specifications. What edge geometry does the insert offer? The insert has a 0.2 mm corner radius and an 11° relief angle, providing a balance between edge strength and achievable surface finish. Can this insert be used for internal as well as external turning? The design and geometry of the insert make it suitable for both external and internal turning, subject to correct holder selection and machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade and precise ISO geometry for consistent medium-to-heavy steel turning. The combination of a PS chipbreaker, 0.2 mm corner radius and an 11° clearance angle provides reliable chip control and process stability. Order the insert via Metav Werkzeuge or consult our technical advisers for application support. TPMT110302 T9225 — TPMT 110302 turning insert by Tungaloy, CVD-coated carbide, 11° clearance TPMT110302-PS T9225 is an ISO triangular turning insert designed for external and internal turning in steel; the universal, CVD-coated carbide grade gives increased toughness for interrupted cuts ISO triangular insert, 11° clearance CVD-coated cemented carbide grade T9225 PS chipbreaker for controlled chips Supplied with cylindrical hole and countersink Stable machining under changing conditions The insert combines a CVD-coated cemented carbide substrate with the T9225 grade to deliver a balance of wear resistance and toughness for medium-to-heavy steel turning. The coating increases heat resistance and reduces flank wear, while the robust substrate tolerates slightly interrupted cuts. This balance means longer tool life and fewer index changes, contributing directly to steady productivity and lower per-part tooling costs. Explanations: CVD-coated refers to a chemical vapour deposition layer that improves hardness and thermal stability without compromising core toughness. Clear compatibility and secure clamping for fast setup ISO conformity of the triangular shape and the detailed hole geometry—cylindrical hole with single-side countersink (40°–60°)—ensures straightforward pairing with standard external holders and boring bars. Compatibility depends on form, relief angle, tolerance class, fixation, size and thickness; the 3.18 mm plate thickness and 11 mm nominal size match common holder specifications. This standardised fit reduces setup time and simplifies inventory management across machine centres. Precision chip control and surface quality The integrated PS chipbreaker is tuned for steel applications and helps form short, controllable chips even under variable engagement. The 0.2 mm corner radius and 60° approach angle combine to reduce cutting forces and promote consistent surface finish, particularly on through-feed and profile turning. For operators, this means fewer interruptions to clear chips and more predictable part quality; for process planners, it supports repeatable cycle times. Recommended uses and selection guidance Ideal for external and internal turning of steel where interrupted cuts or variable engagement occur, the insert is suited to a wide range of turning tasks in production and job-shop environments. Select cutting parameters and a holder rated for the chosen depth of cut and machine rigidity; match the T9225 grade with steels requiring a good mix of toughness and wear resistance. If unsure about feeds, speeds or holder pairing, technical advice is available to align the insert to the specific application. Contact Metav Werkzeuge for tailored application advice and to order TPMT110302-PS T9225 inserts directly, or request assistance from our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951466 SKU (manufacturer): TUN6951466 SKU: 6951466-Tungaloy Model series: ISO turning inserts Key figures ISO designation: 110302 Plate size: 11 Plate thickness: 3.18 mm Corner radius: 0.2 mm Relief/clearance angle: 11° Approach angle: 60° Special features Grade: T9225 Coating: CVD-coated cemented carbide Chipbreaker: PS Shape: triangular Hole: cylindrical hole + single-side countersink (40°–60°) Application: turning (external and internal) Compatibility: ISO holders, clamping sets and replacement screws FAQ What materials is this insert suitable for? The TPMT110302-PS T9225 is designed primarily for steel machining; the T9225 grade offers robustness for medium-to-heavy steel turning and tolerates slightly interrupted cuts. How does the PS chipbreaker affect machining? The PS chipbreaker on this CVD-coated carbide insert promotes short, controlled chips in steel turning, which improves chip evacuation and reduces the risk of re-cutting long swarf. Which holders are compatible with the insert? Compatibility is determined by the insert form, relief angle, tolerance class, fixation, size and thickness; the TPMT110302-PS fits standard ISO triangular external holders and suitable boring bars when matched to the 11 mm size and 3.18 mm thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 T9225 Wendeplatten - Tungaloy
Combining CVD-coated carbide resilience, a TSF chipbreaker and ISO compatibility delivers consistent, productive turning performance; order the insert directly via Metav Werkzeuge or consult the specialists for application recommendations. TPMT 110302 T9225 — ISO turning insert for medium to heavy steel, TSF chipbreaker, Tungaloy TPMT 110302 T9225 is an ISO-format triangular turning insert designed for external and internal turning operations, offering robust performance for variable engagement conditions. TPMT 110302 geometry, 60° triangular form CVD-coated carbide T9225 for steel machining TSF chipbreaker for consistent chip control 0.2 mm nose radius and 11° relief angle High-performance grade for dependable steel turning The TPMT110302-TSF T9225 insert pairs a CVD-coated surface with a tough cemented carbide substrate to balance wear resistance and fracture toughness. This combination is particularly advantageous when machining steels under medium to heavy cutting conditions or when cuts are slightly interrupted; the coating improves resistance to abrasive wear while the base material sustains cutting-edge integrity. The TSF chipbreaker stabilises chip formation, reducing tool vibrations and promoting repeatable surface finish, which supports higher process reliability and reduced rework rates. Designed for secure fitment and predictable results Sold in the ISO format, the triangular insert features a 60° included angle and a cylindrical hole with a single-sided countersink (40°–60°) for positive clamping in standard holders. Compatibility with a given toolholder depends on shape, 11° relief, tolerance class, fastening method, size and thickness; attention to these parameters ensures correct seating and consistent cutting geometry. The 0.2 mm nose radius delivers a balance between edge strength and surface quality; choosing the radius in line with feed rates aids in avoiding premature edge chipping and optimises tool life. Practical benefits: productivity, chip control and material coverage Using a universal grade such as T9225 reduces the need for frequent insert changes across a range of steel alloys, supporting stable chip control and long cutting intervals. The TSF chipbreaker is engineered to produce short, controllable chips in turning operations, which simplifies chip evacuation and reduces cycle interruptions. For operations seeking improved process security and surface consistency, the combination of grade, chipbreaker and ISO-standard geometry translates directly into higher throughput and predictable tool replacement intervals. For application-specific advice or availability of original Tungaloy inserts like TPMT 110302 T9225, contact Metav Werkzeuge for fast stock information and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951472 SKU: 6951472-Tungaloy Manufacturer SKU: TUN6951472 Model series: ISO-Drehwendeschneidplatten Label: TPMT110302-TSF T9225 Data Insert shape: triangular, 60° Nose radius: 0.2 mm Relief/clearance angle: 11° Plate thickness: 3.18 mm Plate size: 11 mm Special features Material: cemented carbide Grade/coating: T9225 (CVD-coated) Chipbreaker: TSF Hole: with cylindrical hole and one-sided countersink (40°–60°) Application: turning; external and internal operations FAQ What applications suit this insert best? The TPMT110302-TSF T9225 insert is intended for turning operations on medium to heavy steel where intermittent cuts or varying engagement demand a tougher grade and reliable chip control. Which material groups can be machined with this grade? The T9225 CVD-coated carbide grade is aimed primarily at steel machining; its combination of wear resistance and toughness provides broad coverage for many steel alloys in production turning. How does the TSF chipbreaker affect machining? The TSF chipbreaker produces short, controllable chips that enhance chip evacuation and reduce the risk of entanglement, contributing to steadier turning cycles and improved surface finishes. What should be checked for correct toolholder compatibility? Ensure matching insert geometry, correct 11° relief, tolerance class, fastening method and the intended insert thickness of 3.18 mm to achieve secure clamping and maintain cutting geometry. Is this an original Tungaloy product and how is it identified? Yes, the item is an original Tungaloy insert identified as TPMT110302-TSF T9225 with manufacturer article number 6951472 and manufacturer SKU TUN6951472 Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 AH6225 TSF Wendeplatten - Tungaloy
Benefit from a sharp, stable cutting edge and universal compatibility for stainless-steel turning; the PVD-coated carbide grade AH6225 provides consistent performance in changing conditions while the TSF chipbreaker improves chip control. Order the TPMT110304-TSF AH6225 directly via Metav Werkzeuge or consult our specialists for application advice. TPMT 110304 AH6225 turning insert (ISO) – triangular 60°, TSF chipbreaker by Tungaloy The TPMT110304-TSF AH6225 is an ISO-standard triangular turning insert designed for external and internal turning, optimised for stainless-steel machining with a TSF chipbreaker. ISO triangular insert, 60° cutting geometry PVD-coated carbide AH6225 for stainless steels TSF chipbreaker for controlled chip formation Central hole with 40°–60° one-sided countersink Reliable cutting performance for stainless-steel turning The PVD-coated carbide grade AH6225 delivers a sharp cutting edge combined with sufficient edge stability to handle typical stainless-steel turning tasks. This balance reduces edge chipping and preserves dimensional accuracy over longer tool life, which translates into fewer interruptions and more predictable batch throughput. The TSF chipbreaker promotes short, segmented chips during turning operations, improving machine safety and ease of handling during unattended cycles. Geometry that speeds setup and improves consistency The triangular 60° ISO standard form and a 0.4 mm corner radius ensure simple orientation in compatible holders and predictable cutting geometry for common turning operations. The central hole with a cylindrical feature and a one-sided countersink (40°–60°) provides secure clamping and repeatable seating, reducing index-change variance. These attributes reduce setup time and scrap rates, supporting efficient production workflows. Measurable technical advantages in everyday machining Key numeric details such as plate thickness 3.18 mm, inscribed size 11 mm and 11° clearance angle contribute to robust cutting mechanics and stable contact with the workpiece. The combination of these dimensions with the PVD-coated carbide substrate supports medium-duty feeds and speeds while retaining surface finish quality. For process planning, these measurable parameters enable reproducible cycle times and help calculate tool-life economics. Compatibility and system considerations for reliable integration Compatibility with a chosen holder is governed by form, clearance angle, tolerance class, fastening style, size and thickness. The insert is intended for an ISO turning system comprising a matching outside holder or boring bar, a support pad or clamping kit and replacement screws. Selecting the correct holder and clamping parts ensures the TPMT110304-TSF AH6225 functions within its designed stability window and realises its full potential in production settings. Practical selection tips for stable machining Choose the TSF chipbreaker and AH6225 grade for operations on stainless steels where a fine balance between sharpness and durability is required. For heavier interrupted cuts, favour a more robust clamping and conservative cutting data; for finishing passes, exploit the insert’s sharp edge to achieve consistent surface quality. When in doubt, match chipbreaker, grade and stability to the workpiece material and machining strategy to reduce rework and extend tool life. For long-term, predictable stainless-steel turning with Tungaloy AH6225 inserts, contact Metav Werkzeuge for availability and tailored application guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6947716 Manufacturer SKU: TUN6947716 Retail SKU: 6947716-Tungaloy Model series: ISO turning indexable inserts WPL designation: TPMT110304-TSF Grade: AH6225 Material: carbide (PVD-coated) Numbers / Core technical data Insert thickness: 3.18 mm Inscribed size: 11 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Special features / Versions PVD-coated carbide grade AH6225 TSF chipbreaker Triangular plate form Central cylindrical hole + one-sided countersink (40°–60°) Designed for turning; suited to stainless steels FAQ What materials is this insert suitable for? The TPMT110304-TSF AH6225 grade is formulated for machining stainless steels, offering a balance of edge sharpness and wear resistance suitable for common austenitic and ferritic stainless grades. Which chip shape does the TSF breaker produce? The TSF chipbreaker on this insert promotes short, segmented chips, improving chip evacuation and safe handling during continuous turning operations. How does the insert secure to the holder? The TPMT110304-TSF features a central cylindrical hole with a one-sided countersink (40°–60°) to provide stable seating and reliable clamping in compatible ISO holders. What are the key dimensional values to check before setup? Check the insert thickness 3.18 mm, inscribed size 11 mm, corner radius 0.4 mm and clearance angle 11° to ensure compatibility with the selected holder and clamping system. Is this an ISO-standard insert and how does that affect replacement choices? Yes, the insert follows ISO geometry conventions, which simplifies replacement and interchangeability within ISO-compatible turning systems from various manufacturers. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 AH6225 Wendeplatten - Tungaloy
TPMT 110304 AH6225 — ISO-Drehwendeschneidplatten für Drehen · Tungaloy TPMT110304-TM AH6225 eignet sich für produktives Außen- und Innendrehen an rostfreien Stählen und verbindet scharfe Schneidkante mit stabiler Performance TPMT 110304 AH6225 von Tungaloy PVD-beschichtetes Hartmetall für rostfreie Stähle 0,4 mm Eckenradius für präzise Konturen 11° Freiwinkel für hohe Stabilität Dreieckige Platte mit zylindrischem Loch + Senkung Lange Standzeit und Materialvorteile für rostfreie Stähle Die PVD-Beschichtung und der ausgewählte Hartmetall-Schneidstoff AH6225 sind speziell für die Bearbeitung von rostfreien Stählen optimiert. Dadurch entsteht eine scharfe, zugleich stabile Schneidkante, die bei mittleren Bearbeitungsbedingungen überzeugt. Anwender profitieren von verbessertem Verschleißverhalten und konstanter Oberflächengüte, was Rüstzyklen reduziert und die Prozesssicherheit erhöht. Erklärend sei angemerkt: PVD steht für Physical Vapor Deposition und sorgt für dünne, haftfeste Schichten, die Wärmeaufnahme und Reibung reduzieren. Effiziente Zerspanung und typische Einsatzfelder Für das Außen- und Innendrehen bietet die dreieckige Plattenform mit 60° Winkel eine gute Balance zwischen Spanvolumen und Stabilität. Der integrierte Spanformer TM ist auf wechselnde Schnittbedingungen ausgerichtet; die Sorte AH6225 liefert dabei konstante Schneidkanten mit guter Spanbildung. Typische Einsatzfelder sind Serienfertigung und Werkstätten, in denen rostfreie Werkstoffe bearbeitet werden müssen und eine zuverlässige Kombination aus Standzeit und Schnittqualität gefragt ist. Einbau, Kompatibilität und praktische Hinweise Die Kompatibilität zur Aufnahme richtet sich nach Form, Freiwinkel (11°), Toleranzklasse, Befestigung, Größe und Dicke. Die Plattendicke 3,18 mm sowie das 0,4 mm Eckenradius sind wichtige Kenngrößen bei der Auswahl des passenden Außenhalters oder der Bohrstange. Die Platte verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°); beim Einbau sind Unterlage/Klemmsatz und passende Ersatzschrauben zu verwenden. Richtig montiert reduziert die Wendeplatte Vibrationen und trägt so zur besseren Oberflächenqualität bei. Für wen sich die Platte lohnt und wie man sie einsetzt Die TPMT110304-TM AH6225 ist ideal für Anwender, die eine universelle Wendeschneidplatte für rostfreie Stähle suchen: Job Shops, Serienfertiger und Instandhaltungswerkstätten profitieren von der Kombination aus Prozesssicherheit und Wirtschaftlichkeit. Bei wechselnden Schnittbedingungen bietet die Sorte AH6225 eine verlässliche Performance. Bei Unsicherheiten zur Passform oder zur optimalen Spanformerwahl hilft die technische Beratung von Metav Werkzeuge gern weiter; technische Daten und praktische Empfehlungen erleichtern die Auswahl. Empfehlung: Für produktive Bearbeitung rostfreier Stähle die TPMT110304-TM AH6225 von Tungaloy wählen; technische Beratung und Bestellung über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 6947719 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: TPMT110304-TM AH6225 SKU: 6947719-Tungaloy Daten Eckenradius: 0,4 mm Winkel: 60° Freiwinkel: 11° Plattendicke: 3,18 mm Plattengröße: 11 mm Hersteller SKU: TUN6947719 Besonderheiten Material: Hartmetall Beschichtung: PVD Sorte: AH6225 Spanformer: TM Plattenform: dreieckig Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen Einsatzgebiet: rostfreie Stähle Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Für welche Werkstoffe ist die TPMT110304-TM AH6225 geeignet? Die TPMT110304-TM AH6225 von Tungaloy ist primär für rostfreie Stähle ausgelegt; die Sorte AH6225 liefert dabei stabile Spanbildung und konstante Schneidkanten bei mittleren Bearbeitungsbedingungen. Welcher Spanformer ist sinnvoll für diese Wendeplatte? Die Platte ist mit dem Spanformer TM kombiniert; dieser Spanformer ist auf vielseitige Einsatzbedingungen abgestimmt und unterstützt eine zuverlässige Spanabfuhr bei rostfreien Stählen. Welche Maße sind für die Halterauswahl entscheidend? Wesentliche Maße sind Plattengröße 11 mm, Plattendicke 3,18 mm, Freiwinkel 11° und der Eckenradius 0,4 mm; diese Werte bestimmen die passende Haltergeometrie und Toleranzklasse. Was bedeutet die Kennzeichnung AH6225? AH6225 bezeichnet die Hartmetallsorte und Beschichtungscharakteristik; bei dieser Sorte liegt der Fokus auf einer ausgewogenen Kombination aus scharfer Schneidkante und guter Verschleißfestigkeit für rostfreie Stähle. Ist die TPMT110304-TM AH6225 für Innen- und Außenbearbeitung verwendbar? Ja, die ISO-Genorm und die dreieckige Form machen die TPMT110304-TM AH6225 sowohl für Außen- als auch für Innendrehoperationen geeignet, vorausgesetzt, Halterform und Radiusanforderungen werden eingehalten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPMT 110304 AH6225 Wendeplatten - Tungaloy
Benefit from a high-performance combination of a PVD-coated cemented carbide grade AH6225 and a compact 0.4 mm corner radius that delivers a sharp yet stable cutting edge for variable turning tasks; the ISO-compatible triangle form allows straightforward integration with standard holders for efficient production. Order the insert directly via Metav Werkzeuge or ask the technical consultants for application-specific recommendations. TPMT110304-PS AH6225 — ISO triangle turning insert, PVD cemented carbide (Tungaloy) A versatile ISO triangle turning insert, the TPMT110304-PS AH6225 is designed for external and internal turning operations, optimised for stainless steels and variable machining conditions PVD-coated cemented carbide grade AH6225 Triangle ISO insert, 60° included angle 0.4 mm corner radius for versatile finishing Countersunk hole for secure clamping Consistent edge performance for mixed machining conditions The combination of a PVD-coated surface and cemented carbide substrate in grade AH6225 provides a balance between a sharp cutting edge and edge stability under changing cutting forces. This universal grade is engineered for machining stainless steels, where work-hardening and adhesive tendencies demand a resilient edge. The coating enhances wear resistance and reduces built-up edge, which in turn leads to longer tool life and a more predictable process window; tool changes and downtime are therefore reduced, supporting higher overall productivity. Geometry engineered for surface quality and strength The triangle ISO form with a 60° included angle offers three effective cutting corners per insert, while the 0.4 mm corner radius delivers a compromise between strength and surface finish — suitable for medium cutting depths and finishing passes. The 11° relief angle reduces rubbing and improves entry behaviour; this geometry supports consistent chip formation and contributes to improved part tolerances. Compatibility with holder geometry is determined by form, relief, tolerance class, clamp arrangement, size and thickness, so selection of the correct ISO holder ensures repeatable results. Secure clamping and straightforward integration A countersunk hole (cylindrical hole with single-sided countersink 40°–60°) provides reliable seating and easy clamping with standard screws and clamp sets. The insert fits into the typical ISO indexable turning system, comprising the insert, the appropriate external holder or boring bar, a seat/locking kit and replacement screws. Correct clamping prevents micro-movements at the cutting edge, which improves surface finish and extends usable life of the corner — an advantage in series production where repeatability matters. Practical gains: process reliability and application guidance Selecting the PS chipbreaker together with grade AH6225 is oriented towards controlled chips and adaptable performance across different stainless steels and machining stability levels. The engineering rationale is simple: stable chip control lowers the risk of workpiece damage and tool interruptions, while the PVD layer maintains a consistent cutting edge under intermittent conditions. If there is uncertainty about optimal feeds and speeds, technical advisors are available to provide cutting data and help match the insert to machine setup and material. Contact details: info@metav-werkzeuge.com | +49 2822 7131930 Contact Metav Werkzeuge for tailored cutting data and to arrange supply of the Tungaloy TPMT110304-PS AH6225 insert directly through our sales team Technical data Article number: 6831294 SKU: 6831294-Tungaloy Manufacturer SKU: TUN6831294 Grade: AH6225 Material: cemented carbide Facts Insert size: 11 Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Hole: with hole — cylindrical + single-sided countersink (40°–60°) Special features PVD coating PS chipbreaker Triangle form (ISO TPMT) ISO-compatible for turning holders Application: Turning; universal grade for stainless steels FAQ Is this insert suitable for machining stainless steels? Yes. The TPMT110304-PS AH6225 is a universal grade formulated for stainless steels, combining a PVD coating with a cemented carbide substrate to resist adhesion and maintain edge stability. What is the function of the PS chipbreaker? The PS chipbreaker promotes controlled chip formation and evacuation under variable cutting conditions, improving process reliability when using the AH6225 grade in turning applications. Which holder features are required for correct compatibility? Compatibility is determined by form, relief angle, tolerance class, attachment method, insert size and thickness; the TPMT110304-PS is intended for standard ISO turning holders designed for triangle inserts. What cutting tasks suit the 0.4 mm corner radius? A 0.4 mm corner radius is appropriate for medium finishing and light roughing, offering a balance between improved surface finish and edge strength. Can the insert be used for internal turning or only external? The insert is suitable for both external and internal turning when mounted in the appropriate external holder or boring bar within an ISO-compatible system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH6225 grade and a 0.4 mm corner radius for stable, sharp cutting in stainless steels; order the TPMT110304-PM AH6225 via Metav Werkzeuge or consult the technical team for holder compatibility and application advice. TPMT110304-PM AH6225 — ISO turning insert for stainless steel, 11° clearance, 0.4 mm radius (Tungaloy) The TPMT110304-PM AH6225 is an ISO-standard triangular turning insert optimised for turning applications on stainless steels, offering a PVD-coated carbide body and a universal grade designed for consistently stable cutting performance. PVD-coated AH6225 for stainless steel Triangular ISO shape with 60° included angle 0.4 mm corner radius for precise turning Cylindrical hole with 40°–60° countersink Consistent cutting performance for stainless steels The insert delivers reliable machining in mixed and changing conditions thanks to the AH6225 universal grade and the PVD coating, which together provide enhanced heat resistance and improved wear behaviour. This combination supports a sharp yet robust cutting edge, reducing the risk of built-up edge and enabling stable chip formation when turning rostfreie Stähle. For production-oriented workshops, this means fewer interruptions for insert changes and more consistent component quality over extended runs. Secure seating and predictable geometry for accurate results A predictable interface matters for repeatable results: the triangular design with a 60° included angle, 11° clearance angle, and a 0.4 mm corner radius establishes defined engagement with the workpiece, while the cylindrical hole with single-side countersink (40°–60°) ensures secure clamping in compatible holders. The insert thickness of 3.18 mm and insert size 11 mm contribute to the overall stiffness of the tool assembly. Compatibility to the holder depends on shape, clearance angle, tolerance class, fastening method, size and thickness — the system typically comprises the ISO insert, a matching external holder or boring bar, a shim/clamping set and spare screws for the complete assembly. Practical advantages and machining guidance Applied with a matching PM chipbreaker, this insert is intended for mid-range turning where balance between edge life and surface finish is required. The PVD-coated carbide substrate improves resistance to thermal softening and abrasive wear, allowing machining strategies that favour uninterrupted production: moderate cutting depths and controlled speeds deliver the best combination of tool life and surface quality. Selecting the correct chipbreaker and process parameters for the component material and machine rigidity will maximise the insert’s productivity and process stability, particularly when machining rostfreie Stähle. For machining tasks that demand a versatile, process-stable turning insert from Tungaloy, contact Metav Werkzeuge for ordering or consultation on holder compatibility and optimal chipbreaker selection — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6831438 SKU: 6831438-Tungaloy Manufacturer SKU: TUN6831438 Article name: TPMT110304-PM AH6225 Model series: ISO-Drehwendeschneidplatten Material: Carbide Core measurements Insert size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Hole style: cylindrical hole + single-side countersink (40°–60°) Design and features Triangular insert geometry PVD-coated carbide Chipbreaker: PM With hole (for positive clamping) Intended application: turning (external and internal) System: ISO insert, matching holder or boring bar, shim/clamping set, spare screws Compatibility determined by shape, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert best suited for? The TPMT110304-PM AH6225 insert is formulated as a universal grade for stainless steels, offering robust cutting behaviour in variable conditions. What chipbreaker is supplied and what is it for? This insert carries a PM chipbreaker, designed to control chip formation and evacuation during typical turning operations on rostfreie Stähle. What are the key dimensions to check for holder compatibility? Key dimensions include insert size 11 mm, thickness 3.18 mm, corner radius 0.4 mm, and clearance angle 11°; the hole style and countersink angle should match the clamping system. How should the insert be integrated into a tooling system? Integration requires a matching external holder or boring bar, a suitable shim/clamping set and the correct screw; the insert seats into the holder according to shape, tolerance and fastening specifications. Is this insert suitable for internal as well as external turning? Yes, the ISO-standard insert geometry and the PM chipbreaker make it suitable for both external and internal turning when combined with the appropriate holder and operating parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of reliable edge stability, universal stainless steel performance and ISO compatibility to keep turning operations consistent and productive; order directly via Metav Werkzeuge or consult our specialists for holder matching and process optimisation. TPMT 110304 AH6225 – Tungaloy triangular turning insert, PVD-coated carbide, 0.4 mm radius The TPMT110304-PSS AH6225 is a triangular ISO turning insert designed for external and internal turning, optimised for medium machining of stainless steel and variable cutting conditions PVD-coated carbide grade AH6225 Universal for stainless steel machining 11° clearance, 60° included angle Cylindrical hole with 40°–60° countersink Consistent cutting performance for stainless steel turning The insert combines a PVD-coated surface with the AH6225 carbide grade to deliver a sharp cutting edge alongside stable cutting edge behaviour under fluctuating conditions. This pairing reduces the tendency for built-up edge on stainless workpieces and supports consistent chip formation during medium cutting tasks. The result is a more predictable process, improved surface integrity and fewer unexpected tool changes—benefits that directly support productivity and repeatable part quality. ISO compatibility and secure clamping for straightforward integration Built to ISO dimensions, the insert's ISO 110304 designation, triangular form and specific thickness make it compatible with a wide range of triangular external holders and boring bars; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. The 0.4 mm radius and the cylindrical hole with single-side countersink (40°–60°) provide secure seating and repeatable location in the clamping pocket. These features simplify tool selection and reduce setup uncertainty when replacing inserts in an established holder system. Better chip control and reduced downtime through chipbreaker design Equipped with the PSS chipbreaker, the insert is developed for controlled chip segmentation during both external and internal turning operations. Controlled chips reduce the risk of entanglement and facilitate automated chip evacuation, which cuts handling time and lessens the likelihood of process interruptions. The balanced combination of chip control and a resilient carbide substrate supports longer uninterrupted runs and more consistent cycle times on serial production tasks. Practical system advice and recommended workflow A reliable system comprises the insert plus a matching external holder or boring bar, a suitable shim/clamping set and replacement screws. The insert's triangle geometry and 60° included angle allow flexibility in approach angles for many common turning applications. Select the chipbreaker and grade according to workpiece stability and the desired surface finish; lighter clamping or long overhangs call for more conservative cutting parameters. For questions about holder matching or best practice setups, Metav Werkzeuge can advise on compatible clamping components and process parameters to suit specific turning tasks. For procurement or technical advice on Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for recommended holders, compatibility checks and grade selection assistance Technical data Article number: 6829890 Manufacturer SKU: TUN6829890 SKU: 6829890-Tungaloy Label: TPMT110304-PSS AH6225 Facts Insert size: 11 Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Special features Material: carbide Coating: PVD Grade: AH6225 Chipbreaker: PSS Shape: triangular Mounting hole: cylindrical hole with single-side countersink (40°–60°) Application: turning FAQ What materials is this insert intended for? The TPMT110304-PSS AH6225 insert is specified for stainless steel machining; the AH6225 grade and PVD coating support medium turning on a broad range of stainless workpieces. Is the insert compatible with standard triangular holders? Yes, the insert follows ISO 110304 dimensions; compatibility with a triangular holder is determined by form, clearance, tolerance class, fastening and thickness—confirm fit with the holder manufacturer or Metav Werkzeuge. What is the purpose of the PSS chipbreaker? The PSS chipbreaker on this turning insert improves chip control and segmentation, which helps maintain process stability and reduces downtime during continuous turning operations. How does the 0.4 mm corner radius affect the cut? A 0.4 mm radius provides a balance between strength and surface quality, offering improved edge robustness compared with sharper radii while still achieving acceptable surface finishes in medium turning. Which SKU should be ordered for this Tungaloy insert? Order using SKU 6829890-Tungaloy or Manufacturer SKU TUN6829890 to ensure the correct TPMT110304-PSS AH6225 grade and geometry are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated carbide grade (AH6235) and a PM chipbreaker to achieve dependable performance on stainless steels and interrupted cuts; the ISO‑compliant triangular geometry with a 0.4 mm corner radius ensures straightforward compatibility with standard holders. Order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. TPMT 110304 AH6235 TPMT110304-PM – Tungaloy indexable turning insert, PVD‑coated carbide, 60° triangle, 0.4 mm radius The TPMT110304‑PM AH6235 is an ISO‑standard triangular indexable insert for turning applications, designed primarily for stainless steels and operations with interrupted cuts; the PM chipbreaker and robust PVD coating support stable cutting under challenging conditions. PVD-coated carbide grade AH6235 Optimised for stainless steels and interrupted cuts Triangular 60° geometry, 0.4 mm corner radius Cylindrical hole with 40°–60° single-side countersink Consistent cutting performance for challenging materials The combination of a PVD‑coated carbide substrate and the AH6235 grade delivers a balance of toughness and wear resistance that favours operations on stainless steels and other materials prone to work hardening. The PM chipbreaker is designed to promote controlled chip formation during interrupted cuts, reducing the risk of edge chipping and lengthening tool life. In practical terms, this means fewer unplanned indexings and a steadier process, which supports improved productivity and predictable cycle times. Precision geometry for reliable holder compatibility The insert’s triangular 60° geometry and 0.4 mm corner radius offer a versatile profile for external and internal turning where average to light finish is required. The ISO designation and standard dimensions make the component compatible with a wide range of ISO‑compliant holders; the 11° clearance angle and 3.18 mm plate thickness ensure the cutting edge sits at the correct approach, enabling stable cutting forces and consistent surface quality. This predictable geometry simplifies tool selection and reduces setup time in mixed‑production environments. Coating and chip control that support process security A PVD coating on a cemented carbide body provides enhanced resistance to abrasive wear while retaining edge toughness, an essential combination when machining stainless steels or when facing intermittent cutting conditions that can produce thermal spikes. The PM chipbreaker helps break and evacuate chips efficiently, lowering the likelihood of chip entanglement and improving operator safety. These attributes together help maintain higher cutting parameters for longer periods, translating into greater throughput and lower tooling costs per part. Application guidance for stable results and longer runtimes Suitable for general turning, facing and light profiling, this insert excels in situations where material variability and interrupted cuts are common. Selecting the PM chipbreaker and the AH6235 grade is recommended when the workpiece material is rostfreier Stahl (stainless steel) or when machining conditions increase the risk of edge breakdown. For best results, pair the insert with a compatible ISO‑design holder, verify clamping rigidity, and adjust feeds and speeds based on machine power and part rigidity to exploit the insert’s chip control and toughness without overloading the cutting edge. For reliable indexable inserts from Tungaloy and tailored machining advice, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and optimisation for specific turning operations Technical data Article number: 6890211 Facts Manufacturer SKU: 6890211-Tungaloy Material: cemented carbide Coating: PVD Grade: AH6235 Chipbreaker: PM ISO designation: TPMT110304-PM Plate thickness: 3.18 mm Size: 11 Corner radius: 0.4 mm Clearance angle: 11° Geometry: triangular, 60° included angle Special features Cylindrical hole with single-side countersink (40°–60°) ISO‑standard insert compatible with ISO turning holders Optimised for stainless steels and interrupted cuts Intended for external and internal turning FAQ What materials is this insert best suited for? The TPMT110304‑PM AH6235 insert is formulated for machining stainless steels and other materials where toughness and chip control are important; the AH6235 grade and PM chipbreaker support interrupted cuts. How does the PM chipbreaker improve process stability? The PM chipbreaker on this indexable turning insert controls chip shape and evacuation, reducing the risk of edge breakouts and supporting more consistent cutting conditions. Is the insert compatible with standard ISO turning holders? Yes, the ISO designation and standard triangular geometry ensure compatibility with ISO‑compliant holders when form, thickness and tolerance class match. What is the corner radius and why does it matter? The insert has a 0.4 mm corner radius; smaller radii help achieve finer detail and reduce cutting forces in light finishing passes, while larger radii would be used for strength in roughing—0.4 mm represents a versatile compromise. Does the PVD coating affect recommended cutting speeds? The PVD coating on the cemented carbide body of this insert improves wear resistance and allows stable operation at higher cutting speeds compared with uncoated grades, but final parameters should be set according to machine rigidity and workpiece properties. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 110304 AH6235 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide AH6235 toughness and a 0.4 mm corner radius for reliable machining in challenging conditions; order directly via Metav Werkzeuge or contact the consultants for application advice. TPMT110304-PS AH6235 — TPMT 110304 turning insert for Drehen by Tungaloy TPMT110304-PS AH6235 is a triangular ISO turning insert engineered for external and internal turning, optimised for rostfreier Stahl and interrupted cuts. Triangular ISO insert, TPMT 110304 format PVD-coated carbide AH6235 for rostfreier Stahl 0.4 mm corner radius for robust chip control 11° clearance and 3.18 mm plate thickness Increased process reliability with wear-resistant coating The PVD-coated carbide grade AH6235 provides a tougher substrate that reduces the risk of edge chipping in unstable cuts, making it particularly suitable for machining rostfreier Stahl and interrupted cutting conditions. This harder, coated surface prolongs tool life and maintains cutting-edge integrity, which translates into fewer tool changes and steadier cycle times. As a result, production runs benefit from improved uptime and predictable component quality. Secure fit and standardised compatibility for quick changeovers The ISO format and clear designation ensure compatibility with standard holders; the insert’s TPMT110304-PS geometry, 11° clearance and 3.18 mm thickness are decisive for correct seating and clamping. The design includes a cylindrical hole with a single-sided countersink (40°–60°), which simplifies mounting and ensures repeatable positioning. Using standardised inserts streamlines tool inventory and reduces setup errors, enabling rapid changeovers on turning centres and lathes. Stable cutting behaviour and improved surface finish With a 0.4 mm corner radius and the PS chipbreaker, this insert balances edge strength and surface quality: the radius increases edge robustness under shock loads while the chipbreaker controls fragment size in variable depths of cut. For external and internal turning operations this results in consistent chip evacuation and reduced risk of built-up edge. The combination supports operators aiming for reliable cycle times and homogenous part finishes with minimal secondary operations. Contact Metav Werkzeuge for a tailored recommendation based on machining parameters or to request further technical data; Metav Werkzeuge can advise on holder compatibility and cutting parameters. Technical Data Article number: 6890204 SKU: 6890204-Tungaloy Manufacturer SKU: TUN6890204 Model series: ISO turning indexable inserts Designation: TPMT110304-PS AH6235 Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Plate thickness: 3.18 mm Clearance angle: 11° Included hole: with hole Hole style: cylindrical hole + one-side countersink (40°–60°) Plate shape: triangular ISO code: 110304 Included chipbreaker: PS Included material type: PVD-coated carbide Special features Grade AH6235, tougher PVD-coated carbide Intended for rostfreier Stahl and interrupted cuts Suitable for external and internal turning Compatibility determined by form, clearance, tolerance class and size System comprises ISO insert, suitable outer holder or boring bar, shim/clamping set and replacement screw FAQ What materials is this insert suitable for? The TPMT110304-PS AH6235 is specified for machining rostfreier Stahl and performs well in interrupted cutting where increased edge resistance is required. Which chipbreaker is fitted and what is its benefit? The insert includes the PS chipbreaker, designed to control chip form and reduce the likelihood of edge breakage in unstable cuts. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius increases edge strength and improves surface finish stability, particularly under shock or interrupted cutting conditions. Is this insert compatible with standard ISO holders? Yes; the ISO format, 110304 designation and the insert’s hole and countersink geometry permit use with compatible TPMT holders and clamping systems when the holder matches form, clearance and tolerance class. What is the manufacturer article number and SKU for ordering? Manufacturer article number 6890204; SKU 6890204-Tungaloy; the insert is supplied by Tungaloy under the designation TPMT110304-PS AH6235. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com