TPMT 110208 GT9530 Wendeplatten - Tungaloy
Benefit from a combination of enhanced surface finish and extended tool life thanks to the GT9530 coated cermet grade and the precise 0.8 mm corner radius; ISO conformity ensures fast changeovers and simple holder compatibility. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TPMT110208-PF GT9530 – ISO triangular indexable insert for turning, coated cermet, 0.8 mm radius (Tungaloy) TPMT110208-PF GT9530 is a triangular ISO indexable insert for external and internal turning, designed for finishing to light general-purpose cuts where surface quality and longer tool life are required ISO triangular geometry for stable turning Coated cermet GT9530 for extended tool life 0.8 mm corner radius for fine surface finish Cylindrical hole with 40°–60° countersink Consistent finish and wear resistance for finishing cuts The GT9530 grade is a coated cermet designed to balance wear resistance and surface quality in finishing operations. Thanks to the fine-grained cermet matrix and protective coating, the insert maintains a sharp cutting edge under stable clamping and cutting conditions, which leads to more consistent part geometry and fewer reworks. The 0.8 mm corner radius reduces the risk of edge chipping while producing a smooth surface texture, making this indexable insert particularly suitable where dimensional accuracy and appearance matter. ISO compatibility for quick tool changes and system reliability As an ISO-standard insert, the TPMT110208-PF fits established triangular holders when the form, clearance angle, tolerance class, fastening method, size and thickness match. The standardisation shortens setup times and simplifies inventory: users can stock a single insert family and pair it with compatible holders, clamping sets and replacement screws. The insert’s cylindrical hole with single-side countersink (40°–60°) ensures secure seating and repeatable orientation during changeovers. Chip control and application guidance for steel machining The PF chipbreaker geometry is optimised for finishing to light universal cuts in steel, delivering controlled chip formation under steady cutting conditions. For stable setups and moderate feeds the chipformer helps prevent built-up edge and supports consistent surface finish. Select cutting parameters that favour finishing—lower feed rates and appropriate cutting speeds—to exploit the coated cermet’s advantages: improved surface quality and extended tool life. Practical handling, traceability and procurement The insert is supplied under the manufacturer article number and SKU shown below, allowing easy reordering and traceability within production systems. The moderate thickness and triangular form make storage and handling straightforward. If uncertain whether this insert matches specific machine or workpiece requirements, Metav Werkzeuge offers application advice and additional technical information by email or phone to support the selection process. For finishing-critical turning applications, choose the Tungaloy TPMT110208-PF GT9530 and contact Metav Werkzeuge for tailored recommendations and fast supply. Technical data Article number: 6998352 Manufacturer SKU: TUN6998352 Name: TPMT110208-PF GT9530 Label / SKU: 6998352-Tungaloy Core data Insert size: 11 Thickness: 2.38 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° Special features Coated cermet grade GT9530 PF chipbreaker ISO triangular indexable insert series Cylindrical hole with single-side countersink (40°–60°) Triangular shape Application: turning Material (field): Hartmetall FAQ What materials is this insert best suited for? The TPMT110208-PF GT9530 is intended primarily for machining steel in finishing to light universal operations; its coated cermet composition supports good surface quality and longer tool life in stable cutting conditions. How does the PF chipbreaker affect machining? The PF chipbreaker on the GT9530 grade promotes controlled chip formation during finishing cuts, reducing built-up edge and contributing to consistent surface finish when the machining setup is stable. Which holders are compatible with this insert? Compatibility depends on ISO form, relief angle, tolerance class, fastening method, insert size and thickness; the TPMT110208-PF fits ISO triangular holders that match these parameters. What does the 40°–60° countersink specification mean for clamping? A countersink within 40°–60° ensures a secure, repeatable seating of the insert in the holder, improving index repeatability and clamping stability during turning cycles. Is technical support available for selecting cutting data? Metav Werkzeuge can provide recommendations for cutting speeds and feeds tailored to the TPMT110208-PF GT9530 and the specific machine, workpiece and clamping conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 NS9530 PF Wendeplatten - Tungaloy
Benefit from precise finishing and consistently low cutting forces thanks to the uncoated cermet NS9530 and a 0.8 mm corner radius; optimised for continuous turning operations and stable chip formation. Order the TPMT110208-PF NS9530 directly via Metav Werkzeuge or ask our consultants if needed. TPMT110208-PF NS9530 ISO turning insert — uncoated cermet finishing grade by Tungaloy TPMT110208-PF NS9530 is an ISO-format triangular indexable insert designed for finishing turns on steels, providing sharp cutting geometry and consistent surface quality ISO-standard triangular turning insert Cermet finishing grade NS9530 Sharp edge for high surface finish Cylindrical hole with 40°–60° countersink Consistent finishing performance for steel turning The insert combines an uncoated cermet substrate with a finishing geometry intended to reduce cutting forces and enhance surface quality. The NS9530 grade delivers a sharp cutting edge and good wear resistance in continuous cutting conditions, which supports predictable component tolerances and repeatable results. By selecting a finishing cermet, the machining process benefits from reduced built-up edge and improved dimensional stability during small depths of cut, making it particularly suitable for final passes where surface integrity is critical. Precise geometry and secure clamping for repeatability Dimensional and geometric details determine compatibility with holders and influence process stability. The triangular profile with a 60° included angle, 0.8 mm corner radius and 11° relief angle provides a defined contact geometry that eases toolpath planning and reduces vibration risk during stable turning. The insert features a cylindrical centre hole with a one-sided 40°–60° countersink, ensuring reliable clamping in standard ISO turning holders. The 2.38 mm thickness contributes to bending resistance while allowing the insert to sit securely in the pocket for repeatable indexation. Material behaviour and application recommendations As a dedicated finishing grade for steel, this insert excels in continuous cuts and is optimised for small feed and depth settings. The PF chipbreaker geometry promotes predictable chip evacuation for finishing operations and pairs well with the sharp cermet edge to maintain low cutting forces and high surface finish. Use the insert in stable setups with appropriate holder rigidity and moderate cutting speeds tailored to cermet behaviour; this reduces thermal shock and preserves edge sharpness for longer productive life. For mixed or interrupted cuts, assess stability before proceeding to preserve the finishing edge. Integration into the machining system and replacement logic The insert is part of a system comprising the ISO insert, a matching external holder or boring bar, a seat/support and fastening hardware. Compatibility hinges on insert form, relief angle, tolerance class, attachment method and size; confirm holder seat geometry matches the TPMT110208-PF profile to ensure correct seating. When replacing inserts, follow the holder torque recommendations and inspect the seat for debris to maintain alignment. Using the correct chipbreaker and grade helps to avoid unnecessary overcutting and supports consistent cycle times across batches. Contact Metav Werkzeuge for application advice, stock availability and recommendation of the optimal holder combination for this Tungaloy finishing insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6998523 SKU: 6998523-Tungaloy Manufacturer SKU: TUN6998523 Name: TPMT110208-PF NS9530 Series: ISO turning inserts Material: cemented carbide Facts Insert size: 11 Thickness: 2.38 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° Hole: cylindrical hole + one-sided countersink (40°–60°) Special features Grade: NS9530 Chipbreaker: PF Substrate: uncoated cermet Typical application: external and internal turning (finishing) System: ISO-format insert compatible with corresponding holders and clamping sets Designed for continuous cuts and small depths of cut FAQ What materials is this insert intended for? The TPMT110208-PF NS9530 is a finishing-grade uncoated cermet insert intended primarily for machining steel, offering low cutting forces and improved surface finish. How does the PF chipbreaker influence machining? The PF chipbreaker on the insert promotes controlled chip formation during finishing operations, which supports consistent surface quality when using the TPMT110208-PF NS9530 in continuous cuts. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle and size; the insert follows ISO norms for triangular turning inserts, so it requires an ISO-compatible external holder or boring bar that accommodates the 11° relief and the central hole with a countersink. What are the key dimensions to check when replacing an insert? Check the insert thickness (2.38 mm), corner radius (0.8 mm), and the included angle (60°) to ensure correct seating and toolpath fidelity with the intended holder when using the TPMT110208-PF NS9530. Can this insert be used for interrupted cuts? The grade is optimised for finishing and continuous cuts; for interrupted cutting conditions, evaluate workpiece stability and cycle parameters as the sharp cermet edge is more sensitive to shock. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 NS9530 Wendeplatten - Tungaloy
Take advantage of a dedicated finishing grade that combines a sharp uncoated cermet edge, a small corner radius and ISO compatibility to improve surface quality and process stability in turning operations. Order the TPMT110208-PS NS9530 directly via Metav Werkzeuge or ask the consultants for cutting data and holder compatibility. TPMT 110208 NS9530 — Turning insert (ISO, PS chipbreaker) by Tungaloy The TPMT110208-PS NS9530 is a triangular ISO turning insert engineered for finishing cuts in steel, offering a sharp cutting edge, low cutting forces and compatibility with standard ISO holders. Triangular ISO insert for turning Uncoated cermet grade NS9530 0.8 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Achieve stable, high-quality surface finishes with an uncoated cermet edge The finishing grade is based on NS9530, an uncoated cermet that provides a consistently sharp edge and reduced built-up edge risk when machining steels under continuous cutting conditions. The combination of the 0.8 mm corner radius and low cutting forces delivers improved surface quality for small depths of cut and light feed conditions, making the insert particularly suitable where fine tolerance and minimal post-processing are required. The material behaviour of the grade supports stable chip formation and helps maintain repeatable results across short production runs. Reliable fit and secure clamping reduce setup uncertainty Compatibility with the chosen toolholder is determined by the insert’s form, 11° clearance angle, tolerance class, fastening style, size and thickness, which together ensure repeatable positioning and rigidity. The insert’s cylindrical hole with single-sided countersink (40°–60°) and a 2.38 mm thickness permit secure clamping in many ISO-compliant external holders or boring bars. Clear specification of these parameters simplifies holder selection and reduces downtime for setup adjustments, contributing to a smoother production flow and predictable component quality. Practical benefits for workshop throughput and process economy Using a finishing cermet like NS9530 brings measurable benefits: lower cutting forces, less tendency for edge deformation and consistent finishes that reduce rework. The triangular geometry allows three indexed cutting edges per insert, supporting cost-efficiency in repetitive turning tasks. In addition, the PS chipbreaker is matched to the grade for controlled chip formation during continuous cuts. Together these attributes enhance productivity in finishing operations while maintaining the reliability expected in industrial machining environments. For tailored recommendations on holder compatibility, cutting parameters or batch supply of Tungaloy TPMT110208-PS NS9530 inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical assistance and availability information. Technical data Article number: 6998547 Manufacturer SKU: TUN6998547 SKU: 6998547-Tungaloy Facts Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Plate thickness: 2.38 mm Plate size: 11 Special features Model series: ISO turning inserts Cutting grade: NS9530 (uncoated cermet) Chipbreaker: PS Plate form: triangular Hole style: cylindrical hole + single-sided countersink (40°–60°) Typical application: external and internal turning; finishing of steel FAQ Is this insert suitable for finishing steel? The TPMT110208-PS NS9530 is specified as a finishing grade for steel, offering a sharp edge and low cutting forces tailored to continuous cuts and small depths of cut. What holder features must be checked for compatibility? Compatibility depends on form, 11° clearance, tolerance class, fastening, size and 2.38 mm thickness; the insert is ISO‑standardised and requires a holder matching these parameters. How many cutting edges does the triangular geometry provide? The triangular shape provides three indexed cutting edges per insert, enabling economical edge changes and extended tool life in finishing cycles. What is the purpose of the PS chipbreaker with this grade? The PS chipbreaker is matched to NS9530 to ensure controlled chip formation during continuous turning, supporting stable machining and reliable surface finish. Can the insert be used for internal turning? Yes, the insert is intended for both external and internal turning applications; suitability depends on the holder and machining conditions chosen for the operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 NS9530 Wendeplatten - Tungaloy
The provided product data contains contradictory material specifications: one entry indicates "Hartmetall" (cemented carbide) while another specifies an uncoated cermet grade (NS9530). These are distinct substrate types with different machining behaviour, cutting parameters and application suitability, so a reliable, industry-accurate product description cannot be created from the current data. Please clarify which substrate is correct — cemented carbide or the uncoated cermet NS9530 — and confirm the coating status. Also verify any related numerical values if applicable (for example insert radius, clearance angle or thickness) to ensure consistency. Once the material designation is confirmed and all technical fields align, a full British English product description, including precise benefits, application guidance and technical data, can be produced.
TPMT 110208 NS9530 Wendeplatten - Tungaloy
High-precision finishing with low cutting forces and a fine 0.8 mm corner radius make this insert ideal for continuous turning of steel; compatibility with ISO holders ensures straightforward integration. Order the TPMT110208-24 NS9530 directly via Metav Werkzeuge or ask our consultants if needed. TPMT 110208 NS9530 — ISO triangular turning insert by Tungaloy, uncoated cermet, 0.8 mm radius TPMT110208-24 NS9530 is an ISO-standard triangular turning insert designed for finishing operations on steel, offering an uncoated cermet grade for sharp edges and low cutting forces Uncoated cermet grade NS9530 Sharp edge for excellent surface finish ISO triangular insert, 11 mm size Compatible with ISO holders and shims High-precision finishing with reduced cutting forces The uncoated cermet NS9530 is formulated for finishing steel, delivering a sharp cutting edge that reduces cutting forces and produces a consistently fine surface. This results in less heat generation and improved dimensional control during continuous cuts. For operations where small depths of cut and high surface quality are required, the 0.8 mm corner radius contributes to stable chip flow and predictable tool contact, which in turn helps to extend the life of the holder and reduce rework on precision components. Seamless integration into ISO turning systems As an ISO-standard triangular insert, the component is compatible with a wide range of external holders and tool posts; compatibility is governed by insert form, relief angle, tolerance class, fastening method, size and thickness. The cylindrical hole with one-sided countersink (40°–60°) ensures secure clamping and accurate seating on the shim and clamp set. The standardised geometry allows for straightforward replacement and reduces setup time, supporting higher machine uptime and simplified stock management. Grade selection and application benefits for steel finishing Designed specifically as a finishing grade, the NS9530 sort offers low cutting forces and a clean-cutting action that is particularly effective in continuous turning and small feed scenarios. The 2.38 mm thickness and 11° relief angle maintain the insert’s rigidity while the triangular form provides three usable cutting edges per insert, improving economic efficiency. When matched to an appropriate chipbreaker and the correct holder stability, this insert supports repeatable, high-quality results in production environments. For tailored recommendations on integrating Tungaloy NS9530 inserts into existing turning processes, or for current availability from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998561 Manufacturer SKU: TUN6998561 SKU: 6998561-Tungaloy Item label: TPMT110208-24 NS9530 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 0.8 mm Included angle: 60° Relief angle: 11° Plate thickness: 2.38 mm Plate size: 11 mm Chipbreaker: 24 ISO code: 110208 Special features Grade: uncoated cermet NS9530 Shape: triangular Hole: with cylindrical hole and one-sided countersink (40°–60°) Application: turning; finishing on steel System components: compatible holder, shim/clamp set and spare screws Typical setup: ISO insert, external holder or boring bar, underlay and clamping set FAQ What applications suit this triangular insert best? The TPMT110208-24 NS9530 is best suited to finishing operations in turning, especially continuous cuts on steel where a sharp edge and low cutting forces are required. Is the NS9530 grade suitable for interrupted cuts or heavy roughing? NS9530 is a finishing cermet designed for continuous cutting and small depths of cut; it is not optimised for heavy roughing or highly interrupted machining. How many cutting edges are available per insert? The triangular form provides three usable cutting edges per insert, allowing cost-effective use before indexation is required. What clamping features ensure secure seating of the insert? The insert’s cylindrical hole with a one-sided countersink (40°–60°) secures positive seating in standard ISO holders and works with compatible shims and clamp sets. Can this insert be used with different chipbreakers? Yes; selecting a chipbreaker that matches the material, cutting parameters and machine stability will optimise chip control and surface finish when using this insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 T5115 Wendeplatten - Tungaloy
Benefit from robust chip control, consistent edge life and precise fit for ISO‑standard turning operations; the combination of CVD‑coated carbide and the universal T5115 grade delivers productive machining of cast iron with predictable wear behaviour. Order directly via Metav Werkzeuge or consult our team for application guidance. TPMT110208-CM T5115 (TPMT 110208 T5115) — ISO triangular turning insert, 0.8 mm corner radius, Tungaloy A TPMT110208-CM T5115 insert designed for ISO‑standard turning, optimised for external and internal turning of cast iron with reliable chip control. CVD-coated carbide grade T5115 Universal cast-iron performance 0.8 mm corner radius for balanced strength Cylindrical hole with countersink 40°–60° Consistent performance and wear resistance for cast iron turning The CVD‑coated carbide substrate provides a stable cutting edge and enhanced wear resistance, making the insert suited to repetitive turning tasks. The T5115 grade balances abrasion resistance and edge stability, which reduces the frequency of insert changes and supports steady cycle times. For machining operations where consistent flank wear and predictable tool life are priorities, this geometry supports longer uninterrupted runs while maintaining acceptable surface finish levels. Reliable mounting and repeatability across ISO systems Designed to ISO dimensions, the insert assures compatibility when matched to a suitable holder and clamping system; compatibility is governed by form, 11° relief angle, tolerance class, fastening method, size and thickness. The cylindrical hole with single‑side countersink (40°–60°) enables secure clamping and repeatable seating, which reduces set‑up variation and improves process stability. Where quick indexability and minimal re‑fixture time are needed, the standardised fit supports reproducible repositioning and straightforward spares management. Geometry engineered for practical machining advantages The triangular plate form with a 60° included angle and a 0.8 mm corner radius offers a compromise between cutting‑edge strength and surface finish. The moderate corner radius resists chipping in interrupted cuts while still permitting acceptable roughness on turned components. The CM chipbreaker geometry assists in controllable chip formation for cast iron, lowering the risk of long stringy chips and simplifying chip evacuation. Together with the 2.38 mm thickness, this geometry is intended to deliver stable cutting in both external and internal turning applications when used with the correct holder and clamping set. Choose Tungaloy inserts with the T5115 grade for dependable cast‑iron turning and contact Metav Werkzeuge for tailored application advice or to confirm holder compatibility: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6864718-Tungaloy Manufacturer article number: 6864718 Manufacturer SKU: TUN6864718 Wording: TPMT110208-CM T5115 Facts Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° Plate thickness: 2.38 mm Plate size: 11 mm Special features Material: carbide Coating: CVD Grade: T5115 Chipbreaker: CM Hole style: cylindrical hole + single‑side countersink (40°–60°) Plate form: triangular Application: turning System composition: ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert intended for? The T5115 grade is a universal grade optimised for cast iron, offering a balanced combination of wear resistance and edge stability for turning applications. Which size and geometry details apply to the insert? The insert is triangular with an 11 mm size, 0.8 mm corner radius, 2.38 mm thickness, 11° relief angle and a 60° included angle; it features a cylindrical hole with a single‑side countersink (40°–60°). How is compatibility with toolholders ensured? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; using an ISO‑compatible holder and the correct shim/clamp set ensures secure clamping and repeatable seating. What are the identifying codes and manufacturer details for this item? This item is sold as TPMT110208-CM T5115 by Tungaloy, SKU 6864718-Tungaloy, manufacturer article number 6864718 Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 T6215 PS Wendeplatten - Tungaloy
Take advantage of the proven combination of a CVD-coated carbide grade and a dedicated PS chipbreaker to ensure stable machining of stainless steels with reliable edge life and controlled chip formation; order directly via Metav Werkzeuge or consult our specialists for holder compatibility. TPMT 110208 T6215 ISO turning indexable insert — CVD-coated carbide, PS chipbreaker (Tungaloy) TPMT110208-PS T6215 is an ISO-standard triangular indexable insert engineered for external and internal turning, optimised for stainless steels under stable to slightly interrupted cutting conditions. CVD-coated carbide for stainless steel machining PS chipbreaker for controlled chips 60° triangular geometry for versatile turning 0.8 mm corner radius for improved edge strength Consistent edge life for uninterrupted production The combination of a CVD-coated carbide substrate and the T6215 grade delivers a wear-resistant cutting edge that reduces regrinding frequency and contributes to predictable tool life. In practice, the CVD coating forms a durable barrier against abrasive and adhesive wear while maintaining toughness at the cutting edge. This results in reduced downtime and a more stable process window when machining stainless steels, where built-up edge and work hardening commonly challenge productivity. The PS chipbreaker further supports continuous cutting by producing short, manageable chips under the recommended conditions, improving operator safety and cycle repeatability. Precision geometry for repeatable surface quality Engineered with a 60° geometry and an 11° relief, this triangular insert maintains a strong edge for general turning tasks and provides reliable contact conditions at the tool tip. The 0.8 mm radius increases edge strength for interrupted cuts and enhances surface finish when feed and speed are balanced. As an ISO-standard insert, its dimensions — 11 mm inscribed circle and 2.38 mm thickness — allow for straightforward indexing and replacement in matching toolholders. The combination of geometry and grade helps achieve consistent results across batches, which is particularly valuable in production environments that prioritise tolerances and surface integrity. System compatibility that simplifies tooling decisions The insert is supplied in the TPMT110208-PS format with a central hole and a cylindrical hole plus single-sided countersink (40°–60°), enabling secure mounting in a wide range of external holders and boring bars. Because compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness, using ISO-standard components reduces the need for bespoke fixtures and shortens set-up time. The product integrates into the typical ISO turning system — insert, matching external holder or boring bar, shim/clamp set and replacement screws — allowing for efficient inventory management and quicker tool changes on the shop floor. For operations seeking to balance productivity and process stability, this insert offers a pragmatic route to repeatable performance. For robust stainless steel turning, choose Tungaloy's TPMT110208-PS T6215; contact Metav Werkzeuge for holder compatibility, order support and delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6903139 Manufacturer SKU: TUN6903139 SKU: 6903139-Tungaloy Model series: ISO turning indexable inserts Label: TPMT110208-PS T6215 Dimensions & key figures Size (inscribed circle): 11 mm Thickness: 2.38 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° Materials & features Material: carbide (Hartmetall) Coating / grade: T6215 (CVD-coated) Chipbreaker: PS Shape: triangular Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Application: turning of stainless steels under stable to slightly interrupted conditions Compatibility: ISO-standard insert for use with matching external holders or boring bars FAQ What workpieces is this insert best suited to? The TPMT110208-PS T6215 is designed primarily for turning stainless steels under stable to lightly interrupted conditions, where the CVD-coated carbide grade helps resist abrasive wear and maintain edge life. How does the PS chipbreaker affect machining? The PS chipbreaker promotes short, controllable chips during turning operations; with the TPMT110208-PS configuration this improves chip evacuation and reduces the risk of entanglement in standard turning setups. Which toolholders are compatible with this ISO insert? Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; the TPMT110208-PS conforms to ISO dimensions and fits holders and boring bars designed for 11 mm triangular inserts. Can this insert handle interrupted cuts? Yes — the 0.8 mm corner radius and robust carbide substrate make the insert suitable for stable to slightly interrupted cutting conditions, providing improved resistance to edge chipping. What is the recommended approach for selecting feeds and speeds? Select cutting data based on the substrate grade, component material and rigidity of the machine-fixture-tool assembly; the T6215 grade emphasises wear resistance, so moderate speeds with appropriate coolant and chip control typically yield the best balance of life and finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 T6215 Wendeplatten - Tungaloy
Combination of CVD-coated carbide (T6215), a 0.8 mm corner radius and ISO‑compliant triangular form delivers reliable, wear‑resistant performance for productive turning of rostfreier Stahl; order the TPMT110208‑PSS T6215 via Metav Werkzeuge or request specialist advice from our consultants. TPMT 110208 T6215 — ISO turning insert (Drehen) by Tungaloy, CVD‑coated carbide, 60° The TPMT110208‑PSS T6215 is an ISO‑standard triangular turning insert designed for wear‑resistant machining of rostfreier Stahl under stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 ISO triangular 60° form for stable clamping 0.8 mm corner radius for precise profiling Consistent productivity and superior wear resistance for rostfreier Stahl machining The CVD‑coated carbide grade T6215 combines a wear‑resistant coating with a tough substrate to extend tool life in demanding turning tasks. The coating reduces flank wear and improves thermal stability, which helps maintain a consistent cutting edge under sustained loads; this leads to predictable tool change intervals and fewer interruptions in the production flow. For contractors and subcontractors machining rostfreier Stahl, this indexable insert provides a balance of durability and surface quality, while the PSS chipbreaker supports stable chip control in medium‑to‑heavy feeds. ISO compatibility and mounting details to ensure safe clamping and repeatability The triangular ISO form with a 60° included angle and a 0.8 mm corner radius is suitable for a wide range of ISO‑compliant holders; compatibility depends on holder form, clearance angle, tolerance class, fastening method and plate thickness. This insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure seating, a plate thickness of 2.38 mm and a free clearance angle of 11°, which together ensure correct positioning and stable clamping. When selecting a seat and clamp, match the tolerance class and fastening geometry to the insert to avoid runout and to maintain repeatable part accuracy. Practical machining guidance and recommended applications Engineered for external and internal turning, the insert suits stable to lightly interrupted operations where surface finish and tool life matter. Use the PSS chipbreaker variant when moderate chip control and consistent surface integrity are priorities; for unstable setups, consider a smaller depth of cut or reduce feed to avoid edge overload. The combination of CVD coating and carbide substrate reduces built‑up edge on rostfreier Stahl, improving surface finish and reducing the need for rework. For best results, pair the insert with a compatible outer holder or boring bar and observe recommended cutting speeds for the workpiece material and machine rigidity. For availability and tailored advice on Tungaloy turning solutions, contact Metav Werkzeuge — Metav Werkzeuge can confirm stock levels and recommend the optimal insert grade or chipbreaker for the application; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903134 Manufacturer SKU: TUN6903134 Label: TPMT110208-PSS T6215 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Dimensions & core data Corner radius: 0.8 mm Plate thickness: 2.38 mm Plate size: 11 Included angle: 60° Free clearance angle: 11° Materials & special features Grade: T6215 Coating: CVD Chipbreaker: PSS Plate form: triangular Hole: with cylindrical hole + single‑side countersink (40°–60°) Typical application: turning (external and internal) FAQ Which materials is this insert best suited for? The TPMT110208‑PSS T6215 is optimised for machining rostfreier Stahl and performs well in stable to lightly interrupted turning operations thanks to its CVD coating and carbide substrate. How does the PSS chipbreaker influence performance? The PSS chipbreaker promotes controlled chip formation and evacuation, improving surface quality and protecting the cutting edge during continuous turning with the T6215 grade. What must be checked for holder compatibility? Ensure the holder matches the insert's triangular ISO form, 60° included angle, plate thickness (2.38 mm), hole style and tolerance class to guarantee correct seating and repeatable clamping. Is this insert suitable for internal turning as well as external? Yes; the insert is specified for both external and internal turning, provided the holder and machining parameters are appropriately matched to the operation. Can the corner radius be changed for profile work? The delivered insert has a 0.8 mm corner radius; for different profiling needs, select inserts with the required radius and ensure holder clearance and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a wear‑resistant CVD‑coated carbide T6215, a precise 11° relief geometry and an optimised one‑sided chipbreaker for reliable stainless‑steel turning; order the insert directly via Metav Werkzeuge or consult the technical team for compatibility and application advice. TPMT 110208 T6215 indexable turning insert (TPMT) — Tungaloy The TPMT110208 T6215 is an ISO‑standard indexable insert engineered for external and internal turning of stainless steels, offering a durable CVD‑coated carbide grade for stable and repeatable machining. CVD‑coated carbide grade T6215 Optimised for stainless steel turning Triangular insert, 11° relief angle One‑sided chipbreaker with centre hole Consistent wear resistance for demanding stainless‑steel applications The insert uses a CVD‑coated carbide substrate in grade T6215, selected for its wear resistance during the machining of stainless steels under stable to mildly interrupted conditions. This coating improves abrasion resistance and reduces adhesive built‑up, which in turn prolongs cutting edge life and maintains surface finish quality over longer tool cycles. As a result, process stability is enhanced and tool change intervals become more predictable, supporting uninterrupted production runs. ISO geometry that simplifies toolholder compatibility and changeover Designed to the ISO turning insert series, the triangular form and standardised dimensions ensure interchangeability in holders built for this format. The 11° relief angle and a thickness of 2.38 mm deliver defined seating and clamping behaviour; tolerance and fastening are decisive for compatibility and are determined by holder form, clearance angle and fixation style. This standardisation reduces setup time, supports rapid insert replacement and simplifies inventory management across toolrooms. Improved chip control and surface quality through edge design A one‑sided chipbreaker combined with a 0.8 mm nose radius provides controlled chip formation and consistent cutting forces during turning. The geometry is optimised to avoid long, stringy chips and to promote chip evacuation in stainless steels, which are prone to work‑hardening. The outcome is a more stable cut, fewer interruptions and an improved finished surface, especially when cutting parameters are matched to the insert’s capabilities. Productivity and economic efficiency in series production The balance between durable grade and engineered geometry translates into measurable process benefits: reduced downtime, fewer insert changes and more predictable batch throughput. The insert supports efficient material removal rates when used with appropriate feeds and speeds, delivering a favourable cost‑per‑component ratio in serial turning operations. The manufacturer reputation adds confidence in repeatability and consistent tool life across production lots. For supply and specialist advice on application and holder compatibility for Tungaloy’s T6215 grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange delivery and technical consultation Technical data Article number: 6903143 Manufacturer SKU: TUN6903143 SKU: 6903143-Tungaloy ISO designation: TPMT110208 Application: Turning Facts Radius: 0.8 mm Thickness: 2.38 mm Insert size: 11 Relief angle: 11° Included angle: 60° Special features Material: Carbide Coating: CVD Grade: T6215 Insert shape: Triangular Hole: cylindrical hole with one‑sided countersink (40°–60°) Chipbreaker: one‑sided Suitable for: stainless steel machining under stable to slightly interrupted conditions FAQ What materials is this insert optimised for? The TPMT110208 T6215 insert is optimised for machining stainless steel, offering a wear‑resistant CVD‑coated carbide grade that handles stable to lightly interrupted cuts. Which toolholders are compatible with this ISO insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening and thickness; the TPMT110208 follows ISO standards and is compatible with holders specified for triangular TPMT inserts. How does the chipbreaker influence process stability? The one‑sided chipbreaker promotes controlled chip formation and evacuation, which reduces cutting interruptions and supports a more stable machining process when turning stainless steel. Is the insert suitable for interrupted cuts? The T6215 grade and geometry are intended for stable to slightly interrupted cutting conditions; heavily interrupted cuts may require a different grade or reinforced geometry. What is the significance of the 0.8 mm nose radius? A 0.8 mm radius balances edge strength and surface finish, providing robust performance while maintaining acceptable dimensional tolerance and surface quality in turning operations. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 110208 T9215 TSF Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 grade and the TSF chipbreaker for consistent productivity in medium-steel turning; the triangular ISO format with a 0.8 mm corner radius and 11° relief angle delivers a reliable balance of wear resistance and fracture safety. Order the insert via Metav Werkzeuge or consult the advisors for application-specific recommendations. TPMT 110208 T9215 — TPMT110208-TSF ISO triangular turning insert for turning (Tungaloy) TPMT 110208 T9215 is a triangular ISO-format indexable insert designed for external and internal turning, combining a CVD-coated cemented carbide grade with a TSF chipbreaker for productive steel machining. CVD-coated carbide grade T9215 0.8 mm corner radius for versatile finishes 11° relief angle for stable cutting geometry Triangular plate with cylindrical hole and countersink Reliable performance for medium-steel turning The insert is engineered to offer consistent wear resistance and high breakage safety for general turning operations on medium-grade steels. The T9215 CVD-coated cemented carbide provides a hard, wear‑resistant surface while maintaining toughness, which helps to prolong tool life during continuous and lightly interrupted cuts. For machining tasks that demand steady removal rates, the combination of grade and chipbreaker supports sustained productivity. Compatibility and mounting considerations for secure clamping Compatibility with a toolholder depends on plate form, relief angle, tolerance class, fixing method, size and thickness. The triangular plate format and the specified 11° relief angle mean the insert is suitable for a wide range of ISO-compatible turning holders; the plate is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) to match common clamping systems. Confirm holder geometry and screw/counterbore match to ensure correct seating and repeatable location during index changes. Practical machining guidance to increase throughput The integrated TSF chipbreaker assists in controlled chip formation when turning steels, reducing the likelihood of long, continuous swarf and improving surface finish consistency. Selecting appropriate cutting parameters—moderate feeds with speeds aligned to the carbide grade and the rigidity of the setup—maximises tool life and productivity. The insert’s 0.8 mm corner radius enables a compromise between robustness and surface quality, allowing both light finishing passes and heavier finishing where component geometry permits. Material and coating benefits explained A CVD (chemical vapour deposition) coating creates a thin, wear‑resistant layer bonded to the cemented carbide substrate, improving thermal and abrasive wear resistance without unduly sacrificing toughness. The T9215 designation denotes a balance optimised for medium‑steel machining: it combines a protective coating with a carbide body formulated to resist flank and crater wear, offering reliable performance across batch production and single‑piece runs. For less experienced users, consider slightly reduced cutting speeds at first and increase as process stability is confirmed. For application advice or immediate supply of Tungaloy TPMT110208-TSF T9215 inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or phone +49 2822 7131930 — Metav Werkzeuge can advise on holder compatibility and recommend optimal cutting parameters Technical data Article number: 6777783 Manufacturer SKU: TUN6777783 SKU: 6777783-Tungaloy Model series: ISO-Drehwendeschneidplatten Core data Plate designation: TPMT110208-TSF Grade / coating: T9215 (CVD-coated) Corner radius: 0.8 mm Relief angle: 11° Plate thickness: 2.38 mm Plate size: 11 (ISO designation) Included angle: 60° Design & special features Triangular plate form With cylindrical hole and one-sided countersink (40°–60°) TSF chipbreaker Cemented carbide substrate Intended application: turning (external and internal) Recommended for medium steel, continuous to slightly interrupted cuts FAQ What steels is this insert optimised for? The TPMT110208-TSF in T9215 is optimised for medium‑grade steels, offering a balance of wear resistance and toughness suited to steady machining conditions. Which toolholders are compatible with this insert? Compatibility is determined by form, relief angle, tolerance class, fixing method, size and thickness; use ISO-compatible triangular holders that accept a TPMT110208‑format plate with cylindrical hole and countersink. How does the TSF chipbreaker affect machining? The TSF chipbreaker promotes controlled chip formation on steel, improving surface finish and reducing entanglement, which enhances process reliability when using the TPMT110208-TSF insert. Is the coating suitable for interrupted cuts? Yes — the CVD-coated T9215 grade combines wear resistance with fracture safety, making the insert suitable for continuous to lightly interrupted cutting conditions. What are the key dimensions to check before ordering? Verify the plate size (ISO 110208 format), corner radius (0.8 mm), plate thickness (2.38 mm), and the presence of the cylindrical hole with counterbore to ensure correct clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 T9215 Wendeplatten - Tungaloy
Benefit from the CVD-coated T9215 grade and a 0.8 mm corner radius for improved wear resistance and predictable chip formation; these characteristics support high productivity in medium‑steel turning. Order or request advice directly via Metav Werkzeuge if further process optimisation is required. TPMT110208 T9215 triangular turning insert, CVD‑coated carbide, for turning — Tungaloy The TPMT110208 T9215 is an ISO‑indexable triangular insert intended for external and internal turning, optimised for medium steel machining. CVD‑coated carbide for high wear resistance Optimised for medium steel machining 11° clearance angle for stable cutting Triangular ISO shape with 0.8 mm corner radius Maximised productivity through a wear‑resistant grade The insert is built on a carbide substrate and finished with a CVD coating, forming the T9215 grade that balances wear resistance with fracture toughness. This combination is particularly effective for continuous to slightly interrupted cuts in medium‑hard steels, allowing longer tool life and fewer interruptions for index changes. The CVD layer reduces abrasive wear while the substrate maintains edge integrity, which together help to reduce overall machining costs through increased uptime and consistent component quality. Geometry and clamping that ensure process reliability The triangular ISO form with an 0.8 mm corner radius and a 11° clearance angle provides a predictable cutting geometry that supports dimensional control and surface finish. The insert’s 2.38 mm thickness and the cylindrical hole with a single‑sided countersink (40°–60°) ensure secure seating and repeatable clamping in ISO‑compatible holders. The clearance angle prevents rubbing on the flank face, reducing heat generation and helping to maintain tool life; the corner radius balances strength and edge formation to achieve reliable cutting performance. Ease of integration and economical operation Designed as part of an ISO system comprising the insert, a matching external holder or boring bar, a shim/clamping set and replacement screws, the geometry and tolerance range allow straightforward replacement and inventory management. The single‑sided chipbreaker and the material pairing are tuned for efficient chip control in steel, supporting stable cutting and predictable machining cycles. As a result, the insert contributes to shorter cycle times and repeatable results, making it a practical choice for production environments seeking consistent productivity and process stability. For tailored advice on integrating the CVD‑coated T9215 grade into existing turning processes or for availability information, contact Metav Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6774004 SKU: 6774004-Tungaloy Manufacturer SKU: TUN6774004 Model series: ISO indexable turning inserts Material: carbide Grade/coating: T9215 (CVD‑coated) Application: turning ISO designation: 110208 Facts Insert size: 11 mm Thickness: 2.38 mm Clearance angle: 11° Included angle: 60° Corner radius: 0.8 mm Hole: with hole Hole style: cylindrical hole + single‑sided countersink (40°–60°) Special features Triangular insert form Single‑sided chipbreaker Optimised for medium steel machining Suitable for continuous to slightly interrupted cuts Compatibility determined by form, clearance, tolerance class, fastening, size and thickness System components: ISO insert, outer holder or boring bar, shim/clamping set and replacement screws FAQ Is this insert suitable for machining steel? The TPMT110208 T9215 turning insert by Tungaloy is specifically optimised for medium‑steel machining; the CVD‑coated carbide grade offers a balance of wear resistance and toughness suitable for continuous to slightly interrupted cuts. Which holders are compatible with this insert? Compatibility depends on the ISO form, clearance angle (11°), thickness (2.38 mm), tolerance class, fastening and size (11 mm). The TPMT110208 form is intended for ISO‑compatible external holders and boring bars. What are the key geometric specifications? The insert has a corner radius of 0.8 mm, an included angle of 60°, a thickness of 2.38 mm and a clearance angle of 11°; the ISO designation is 110208 and the SKU is 6774004-Tungaloy. What chip control can be expected? The single‑sided chipbreaker on the TPMT110208 T9215 promotes controlled chip formation in medium steels, aiding stable cutting and consistent surface quality under appropriate cutting conditions. Can this insert be used for internal turning as well as external? Yes, the ISO triangular form and the specified geometry make the insert suitable for both external and internal turning operations within the stated material and cutting‑condition limits. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, a 0.8 mm corner radius and a triangular 60° geometry to maintain stable cutting at high throughput in medium-steel turning; order the insert via Metav Werkzeuge or consult the technical team for application-specific recommendations. TPMT 110208 T9215 ISO turning insert — triangular 60° for turning by Tungaloy TPMT 110208 T9215 is an ISO-format indexable turning insert designed for external and internal turning in medium-steel applications, offering a balance of wear resistance and fracture toughness. CVD-coated carbide T9215 for medium steel Triangular 60° insert with 0.8 mm radius 11° clearance angle for stable cutting Cylindrical hole with countersink for secure clamping High productivity through a wear-resistant CVD-coated grade The CVD-coated T9215 grade combines a carbide substrate with a robust coating that improves wear resistance under continuous and slightly interrupted cutting conditions. This results in longer tool life and more predictable machining cycles, which reduces tool changes and increases spindle uptime. For medium-steel turning, the grade’s balanced hardness and toughness aid chip formation while resisting crater and flank wear, supporting a steady production rhythm and consistent surface finish. Geometry engineered for repeatability and surface quality The triangular 60° basic shape gives defined cutting mechanics and multiple indexing options, while the 0.8 mm corner radius softens the cutting edge to improve surface integrity without sacrificing strength. The 11° clearance angle reduces rubbing on the flank and helps maintain a constant cutting force, which improves dimensional repeatability on turned parts. These design choices translate into fewer quality rejects and more reliable process windows on batch production. System compatibility for fast tool changes and secure clamping Compatibility with toolholders depends on the insert’s form, clearance angle, tolerance class, fixing method, size and thickness. The insert is supplied with a cylindrical hole plus a one-sided countersink (40°–60°) for positive and repeatable clamping in ISO-style external holders or boring bars. Integrating this indexable insert into an ISO tool system simplifies reloading and replacement, shortens set-up times and reduces non-productive time on the machine. Chip control and application guidance for best results The PS chipbreaker geometry is suited to medium-steel cutting where consistent chip control and reliable evacuation are required. Selecting the right combination of grade and chipbreaker — as with T9215 and PS — helps prevent stringing or clogging and supports stable cutting at higher feed and speed settings. For interrupted cuts, assess stability and choose a chipbreaker and machining parameters that prioritise edge security to avoid premature chipping. Contact Metav Werkzeuge today for tailored application advice and to secure TPMT110208-PS T9215 from Tungaloy; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Manufacturer article number: 6774043 SKU: 6774043-Tungaloy Manufacturer SKU: TUN6774043 Model series: ISO turning indexable inserts Designation: TPMT110208-PS T9215 Facts Insert size: 11 Insert shape: triangular, 60° Corner radius: 0.8 mm Plate thickness: 2.38 mm Clearance angle: 11° Hole: cylindrical hole with one-sided countersink 40°–60° Chipbreaker: PS Grade/coating: T9215, CVD-coated carbide Materials and special features Material: carbide Application: turning (external and internal) Suitable for: medium steel machining Cutting conditions: continuous to slightly interrupted cuts System components: insert, external holder or boring bar, clamping plate and screws FAQ What materials is this insert best suited for? The TPMT110208-PS T9215 insert from Tungaloy is optimised for medium steel machining and provides a balance of wear resistance and toughness for general turning tasks. Is the PS chipbreaker suitable for interrupted cuts? The PS chipbreaker on the TPMT110208-PS is designed for good chip control in continuous to slightly interrupted cuts; for heavy interruptions, evaluate stability and consider a more robust cutting strategy. How does the 0.8 mm corner radius affect the finished part? A 0.8 mm corner radius on this insert improves surface finish and reduces the risk of stress concentrations while maintaining sufficient edge strength for typical medium-steel turning. Which holders are compatible with this ISO-format insert? Compatibility requires a holder matching the insert form, 11° clearance, size, thickness and clamping style; the TPMT110208-PS fits ISO-compliant external holders or boring bars with the appropriate clamping plate and screws. How many usable edges does the triangular insert provide? The triangular geometry provides three primary cutting corners; the total number of usable edges depends on whether the specific insert design is single- or double-sided and on the indexing method described by the manufacturer Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 T9215 Wendeplatten - Tungaloy
Combines CVD‑coated carbide grade T9215 with a 0.8 mm corner radius to deliver productive and reliable medium‑steel turning; order the TPMT110208‑TM T9215 directly via Metav Werkzeuge or consult the technical team for application advice. TPMT 110208 T9215 – ISO turning insert, CVD‑coated carbide (Tungaloy) A TPMT110208‑TM T9215 insert for ISO‑standard external and internal turning, optimised for medium steel machining. CVD‑coated carbide grade T9215 Triangular ISO insert, 11 mm size 0.8 mm corner radius for versatile use Compatible with ISO turning holders Increased productivity from a wear‑resistant grade The combination of a CVD‑coated surface and a tough carbide substrate makes this insert particularly suitable for continuous and lightly interrupted cuts in medium steel. The T9215 grade balances wear resistance with fracture toughness, which reduces tool change frequency and supports higher spindle time. For operations where consistent part quality and long tool life matter, this geometry and substrate lead to measurable process stability and lower unit costs over production runs. Reliable geometry for consistent surface quality A 0.8 mm corner radius and a standard 60° triangle form contribute to predictable cutting forces and good component finish when turning shoulders and profiles. The 11° clearance angle minimises rubbing while maintaining tool strength at the edge; this geometry helps achieve repeatable surface results even under varying feed conditions. For users unfamiliar with cutting geometry, the radius influences strength and finish: larger radii give smoother surfaces and greater edge support, while smaller radii allow finer detail. Simple integration with ISO holder systems Designed as an ISO‑normed indexable insert, the TPMT110208‑TM fits into conventional triangular external and internal turning holders that accept the 11 mm size and the specified thickness. The insert’s mounting features — cylindrical hole plus one‑sided countersink (40°–60°) — ensure secure clamping and correct seating, which is essential for repeatable machining accuracy. This compatibility reduces set‑up time and simplifies tool inventory management in mixed‑brand toolrooms. Chip control and recommended applications The TM chipbreaker is tailored to medium steel operations and supports stable chip formation across a range of feeds and depths of cut. For optimal results, select a chipbreaker and grade combination based on material, cut stability and surface finish requirements; the T9215 grade is the first choice for many medium‑steel turning tasks due to its balanced properties. When machining interrupted cuts or tougher workpiece conditions, pairing the insert with a rigid holder and appropriate cutting parameters preserves edge life and part quality. For reliable medium‑steel turning with Tungaloy quality, contact Metav Werkzeuge for tailored advice and order support at info@metav-werkzeuge.com or by phone at +49 2822 7131930, quoting the TPMT110208‑TM T9215 SKU Technical data Article number: 6777824 Manufacturer SKU: TUN6777824 SKU: 6777824‑Tungaloy Model series: ISO turning indexable inserts Material: Carbide Facts Corner radius: 0.8 mm Insert size: 11 mm Thickness: 2.38 mm Clearance angle: 11° Triangle included angle: 60° Special features Grade: T9215 (CVD‑coated carbide) Chipbreaker: TM Insert form: triangular Mounting: with hole — cylindrical hole + one‑sided countersink (40°–60°) Typical application: external and internal turning of medium steel FAQ Which materials is this insert best suited for? The TPMT110208‑TM T9215 is specified for medium steel machining; the T9215 grade combines wear resistance and toughness for productive turning. What does the TM chipbreaker deliver in practice? The TM chipbreaker promotes stable chip formation in continuous to lightly interrupted cuts, improving swarf control and surface consistency for medium‑steel turning with this insert. Is the insert compatible with standard ISO turning holders? Yes, the insert follows ISO dimensions for triangular inserts and is designed to seat securely in holders that accept 11 mm triangular inserts with the described hole and countersink. How does the 0.8 mm corner radius affect performance? A 0.8 mm radius gives a balance between edge strength and surface finish; it supports robust machining while permitting reasonably fine surface profiles during turning. What cutting conditions suit the T9215 grade best? T9215 performs well in continuous and lightly interrupted cuts on medium steel where a compromise of tool life and fracture resistance is required; pairing with a rigid setup and correct feeds enhances performance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 110208 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215 for extended wear resistance, a PSS chipbreaker for stable chip control, and a compact 0.8 mm corner radius for precise contouring; order the inserts directly via Metav Werkzeuge or ask the Metav Werkzeuge consultants for application advice. TPMT 110208 T9215 — ISO turning insert, CVD-coated carbide, Tungaloy The TPMT110208-PSS T9215 is an ISO-standard triangular indexable insert for turning, optimised for medium-steel machining with a PSS chipbreaker for consistent chip control. CVD-coated carbide grade T9215 for medium steel PSS chipbreaker for stable chip control Triangular insert, 11 mm inscribed circle, 11° clearance angle Cylindrical hole with single-side countersink 40°–60° Higher throughput through wear-resistant coating The insert uses a CVD-coated carbide substrate in grade T9215, combining enhanced wear resistance with breakage tolerance. This coating method produces a dense, adherent layer that slows flank and crater wear, enabling longer tool life under continuous to slightly interrupted cuts. The result is measurable improvement in cycle time and part consistency, making the insert a cost-effective option for medium-steel production runs where sustained productivity and predictable tool changes are essential. Predictable clamping and repeatable geometry for accurate turning Built to the ISO-standard geometry, the triangular form with an 11° clearance angle and 60° included angle ensures compatibility with standard external holders and boring bars when the holder matches form, tolerance class, fastening and size. The standardised dimensions and a thickness of 2.38 mm provide secure seating and repeatable clamping; this reduces set-up variability and minimises dimensional scatter on turned components, which supports tighter process control in batch production. Stable machining and effective chip control for safer operations The PSS chipbreaker is designed for controlled chip formation in medium steels, improving evacuation and reducing re-cutting risks. The insert features a cylindrical hole with a single-side countersink (40°–60°) for positive and centred mounting, and a 0.8 mm corner radius that balances edge strength with the capacity to generate defined radii on workpieces. In practice, the insert is part of a system comprising an ISO indexable insert, a matching holder or boring bar, a shim/locking set and replacement screws, which together provide reliable mechanical stability during turning. For high-productivity medium-steel turning, request Tungaloy TPMT110208-PSS T9215 inserts from Metav Werkzeuge or consult the Metav Werkzeuge technical team at info@metav-werkzeuge.com or +49 2822 7131930 to confirm optimal chipbreaker and holder pairing Technical Data Article number: 6773994 Manufacturer SKU: TUN6773994 SKU: 6773994-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Coating / grade: T9215 (CVD-coated) Core dimensions Corner radius: 0.8 mm Thickness: 2.38 mm Inscribed circle: 11 mm Clearance angle: 11° Included angle: 60° Design & features Triangular plate form With hole: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: PSS Typical application: external and internal turning System composition: ISO insert, matching external holder/boring bar, shim/locking set, replacement screws FAQ What materials is this insert best suited for? The Tungaloy TPMT110208-PSS T9215 insert is specified for medium-steel machining; the T9215 CVD-coated carbide offers wear resistance and toughness suited to continuous and slightly interrupted cuts in steel. Which chip control solution does the insert provide? The insert uses the PSS chipbreaker, which promotes short, controllable chips in medium steels and assists in stable chip evacuation during turning. How is the insert mounted and secured? Mounting relies on the ISO-standard geometry: the cylindrical hole with a single-side countersink (40°–60°) provides centred, positive clamping when paired with the correct holder, shim and fastening screws. What is the effect of the 0.8 mm corner radius? A 0.8 mm corner radius improves edge strength and enables defined radii on turned features while maintaining a balance between surface finish and cutting forces for medium-steel turning. Is the insert suitable for interrupted cuts? The T9215 grade is designed for high productivity in continuous to slightly interrupted cuts; for heavy interruptions, tool selection and cutting parameters should be reviewed by the technical team. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 T9225 TSF Wendeplatten - Tungaloy
Take advantage of the CVD-coated T9225 grade and the TSF chipbreaker for dependable chip control and extended tool life; the triangular ISO format with a 0.8 mm nose radius and 11° relief allows robust performance in medium-to-heavy steel turning. Order the TPMT110208-TSF T9225 directly via Metav Werkzeuge or ask our consultants if needed. TPMT110208-TSF T9225 ISO turning insert — triangular, TSF chipbreaker, Tungaloy The TPMT110208-TSF T9225 is an ISO-format triangular turning insert designed for external and internal turning in steel, offering a balance of wear resistance and toughness for medium-to-heavy machining. CVD-coated carbide grade T9225 For medium-to-heavy steel turning TSF chipbreaker for reliable chip control 11° relief angle and 0.8 mm nose radius More durable cutting thanks to CVD-coated T9225 The insert uses a CVD-coated carbide grade T9225, formulated for stable productivity in variable cutting conditions. The coating increases flank and crater wear resistance while the substrate maintains toughness, so the tool copes better with interrupted cuts and fluctuating engagement. This results in longer service life and fewer changeovers, supporting consistent cycle times and predictable tool-cost calculations. Precise fit and system compatibility for reliable set-up Delivered as an ISO-format triangular plate, the insert’s fit depends on the holder’s form, relief angle, tolerance class, fastening method, size and thickness. The plate features a central hole with a cylindrical bore and single-sided countersink (40°–60°) for secure clamping. When pairing with a matching external holder or boring bar, ensure the holder geometry matches the insert’s 11° clearance to maintain seating accuracy and repeatable cutting results. Consistent chip control and improved surface quality The TSF chipbreaker controls chip formation for stable evacuation during both roughing and semi-finishing, reducing re-cutting and tool pressure spikes. The 0.8 mm nose radius provides a compromise between edge strength and achievable surface finish: larger radii increase edge life, while this radius still allows respectable profile definition. Together with the grade’s wear resistance, this delivers more consistent part quality across production batches. Practical recommendations for application and productivity Ideal for turning applications in steel where variable engagement or light interruptions occur, the insert performs well in medium-to-heavy feeds and depths of cut. Select the TSF breaker and T9225 grade when stability is moderate and toughness is required. The machining system typically comprises the ISO insert, a matching holder or boring bar, shim/clamp set and replacement screws — these elements ensure correct seat pressure and repeatable tool location for efficient tool management. Contact Metav Werkzeuge for application advice and to secure original Tungaloy TPMT110208-TSF T9225 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781465 SKU: 6781465-Tungaloy Manufacturer SKU: TUN6781465 Designation: TPMT110208-TSF T9225 Application: Turning Model series: ISO turning inserts Material: carbide Grade/coating: T9225 (CVD-coated) Manufacturer: Tungaloy Facts ISO code: 110208 Shape: triangular (60°) Nose radius: 0.8 mm Relief angle: 11° Insert size: 11 mm Thickness: 2.38 mm Hole: with hole; cylindrical hole + single-side countersink (40°–60°) Special features TSF chipbreaker for controlled chip formation Robust universal grade for medium-to-heavy steel turning Suited to interrupted cuts and variable engagement Compatibility depends on holder form, relief, tolerance, fastening, size and thickness System build: insert, matching external holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert suitable for? The TPMT110208-TSF T9225 is optimised for steel machining, particularly medium-to-heavy turning operations where toughness and wear resistance are needed. How does the TSF chipbreaker affect machining? The TSF chipbreaker promotes short, controllable chips and reliable evacuation, improving process stability and reducing the likelihood of chip entanglement in turning operations. Which holder features are required for correct compatibility? Compatibility requires a holder matching the insert’s form, 11° relief angle, tolerance class, fastening method, size and thickness to ensure secure seating and repeatable cutting geometry. Is this insert suitable for interrupted cuts? Yes, the T9225 grade’s combination of coating and substrate toughness is intended to handle interrupted cuts and fluctuating engagements without premature chipping. What benefit does the 0.8 mm nose radius provide? A 0.8 mm nose radius balances edge strength and achievable surface finish, offering improved edge life compared with a very small radius while still maintaining profile accuracy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9225 and the 0.8 mm corner radius for improved chip control and longer edge life in medium to heavy steel turning; order the TPMT110208 T9225 insert directly via Metav Werkzeuge or ask our consultants for tailored application advice. TPMT 110208 T9225 indexable turning insert for turning — Tungaloy TPMT 110208 T9225 is an ISO-standard triangular indexable insert designed for external and internal turning operations, offering a robust universal grade suited to variable cutting conditions. CVD-coated carbide grade T9225 Robust universal grade for steel machining 11° clearance angle for reliable cutting Triangular 11 mm insert with 0.8 mm radius Consistent performance from a CVD-coated carbide grade The insert is manufactured in a CVD-coated carbide grade optimised as a robust universal grade for medium to heavy steel machining. The coating and substrate combination provides a balance between wear resistance and toughness, which means fewer tool changes under varying engagement conditions. With the corner radius 0.8 mm and a well-defined chip geometry, the component supports steady material removal and helps maintain dimensional accuracy on turned parts. Reliable chip control and edge stability A single-sided chipbreaker together with the sharp geometry of the triangle ensures predictable chip formation and evacuation during both continuous and slightly interrupted cuts. The built-in 11° clearance angle reduces flank contact and heat generation, extending edge life and improving surface finish. These characteristics translate into higher process stability and potential reductions in cycle time for small- to medium-batch production. System compatibility and handling advantages Designed to the ISO series, the insert integrates smoothly into common external holders and boring bars; compatibility is governed by form, clearance, tolerance class, attachment, size and thickness. The triangular 11 mm form and cylindrical hole with one-sided countersink (40°–60°) allow secure clamping and simple indexation, while the thickness 2.38 mm offers sufficient support under heavier cuts. This system approach simplifies inventory and reduces setup complexity in mixed-production environments. Practical application guidance for turning workflows For turning tasks on steel where cutting conditions change or interruptions occur, the T9225 grade offers a practical compromise between wear resistance and impact toughness. The combination of CVD-coated carbide and the insert’s geometry promotes consistent surface quality and repeatable results, making it suitable for workshops aiming to standardise tooling across a range of turning operations. For assistance selecting the correct chipbreaker and holder combination, technical advice is available to match cutting data to machine rigidity. For precise medium-to-heavy steel turning, request the TPMT 110208 T9225 insert from Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com for application-specific recommendations. Technical data Article number: 6781081 Manufacturer SKU: TUN6781081 Model series: ISO turning indexable inserts ISO designation: TPMT110208 Shape: triangular Size: 11 mm Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Hole style: cylindrical hole + one-sided countersink (40°–60°) Grade: T9225 Material: carbide Coating: CVD-coated Chipbreaker: single-sided Application: turning Facts Size: 11 mm Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Article number: 6781081 Special features CVD-coated carbide substrate Robust universal grade for medium to heavy steel machining ISO-standard insert for easy holder compatibility Triangular form for three cutting edges per indexation Cylindrical hole with one-sided countersink (40°–60°) for secure clamping Single-sided chipbreaker for controlled chip formation Designed for external and internal turning operations FAQ What materials is this insert suited for? The TPMT 110208 T9225 insert is intended primarily for steel machining and is formulated as a universal grade for medium to heavy steel turning operations. How does the chipbreaker affect performance? The single-sided chipbreaker on this insert improves chip control and evacuation during both continuous and lightly interrupted cuts, helping to maintain surface quality and process stability. Is the insert compatible with standard ISO holders? Yes, the ISO designation and geometry ensure compatibility with matching ISO external holders and boring bars when the holder’s form, clearance and clamping match the insert’s specifications. What benefits does the CVD coating deliver? The CVD coating increases wear resistance at the cutting edge while the substrate retains toughness, which together reduce edge breakdown and extend useful tool life under varying cutting conditions. How many usable edges are available per insert? The triangular form provides three indexable cutting edges, allowing economical use and quick indexation when an edge is worn. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 T9225 Wendeplatten - Tungaloy
The combination of CVD-coated carbide grade T9225, a 0.8 mm corner radius and a triangular 60° geometry ensures robust performance for medium to heavy steel turning; reliable chip control and secure clamping reduce downtime. Order the TPMT110208-PS T9225 directly via Metav Werkzeuge or ask the consultants for compatibility guidance. TPMT110208-PS T9225 – ISO turning insert (triangular, 60°, Tungaloy) TPMT110208-PS T9225 is an ISO‑standard indexable insert optimised for external and internal turning in steel, offering a balance of toughness and wear resistance ISO‑standard triangular insert for turning CVD‑coated carbide grade T9225 0.8 mm corner radius for versatile cutting 11° clearance angle, 2.38 mm thickness Cylindrical hole with countersink for secure clamping Reliable performance for medium to heavy steel turning The CVD‑coated carbide composition and T9225 grade deliver increased toughness and wear resistance, making the insert suitable for fluctuating engagement conditions and slightly interrupted cuts. The combination of coating and substrate improves thermal stability and abrasion resistance; this leads to longer tool life and consistent component quality in batch production. The included chipbreaker PS supports stable chip formation in typical steel applications, reducing cycle interruption and rework. Secure geometry and holder compatibility for predictable results Designed to ISO conventions, the triangular 60° shape and 0.8 mm corner radius provide a universal geometry that suits both light finishing and heavier passes when selected appropriately. The 11° clearance and 2.38 mm thickness contribute to mechanical stability under load. The insert’s cylindrical hole with one‑sided countersink (40°–60°) enables reliable clamping with the correct seat and screw; compatibility with a holder is governed by form, clearance, tolerance class, clamping method, size and thickness. Using the ISO designation simplifies matching to existing toolholders and clamping sets. Practical benefits at the machine and in production planning Indexable inserts such as the TPMT110208‑PS reduce setup time because only the insert needs replacement rather than regrinding a solid tool. The robust T9225 grade and the chipbreaker PS help maintain surface finish and dimensional consistency, which supports process stability and cost efficiency over longer runs. For technical clarification or to confirm suitability for specific steel grades or holder types, the technical team at Metav Werkzeuge can supply cutting data and compatibility advice; standard system composition includes the insert, matching external holder or boring bar, support/clamp set and replacement screws. Contact Metav Werkzeuge for a compatibility check and specification support to secure the Tungaloy TPMT110208‑PS T9225 for reliable steel turning applications Technical details Article number: 6781211 SKU: 6781211-Tungaloy Manufacturer SKU: TUN6781211 Model series: ISO‑turning inserts ISO designation: TPMT110208-PS Label: TPMT110208-PS T9225 Core specifications Corner radius: 0.8 mm Thickness: 2.38 mm Size: 11 Clearance angle: 11° Included angle: 60° Hole: with hole Features & applications Material: carbide (CVD‑coated) Grade/sorte: T9225 Chipbreaker: PS Typical application: external and internal turning Compatible when matched by form, clearance, tolerance class, clamping, size and thickness Hole style: cylindrical hole + one‑sided countersink (40°–60°) Manufacturer: Tungaloy FAQ What materials is this insert best suited for? The TPMT110208‑PS T9225 is formulated for medium to heavy machining of steel; the T9225 grade and chipbreaker PS enable stable cutting under changing engagement and slightly interrupted cuts. How does the chipbreaker PS affect machining? The PS chipbreaker promotes controlled chip formation and evacuation in steel turning, improving surface finish and reducing the risk of built‑up edge during the machining process. Which holder features are required for proper clamping? Proper clamping requires a holder that matches the ISO triangular seat, accepts the insert thickness of 2.38 mm, and secures the insert via the cylindrical hole with the specified countersink; compatibility depends on form, clearance and tolerance class. Is the TPMT110208‑PS suitable for internal turning? Yes, the ISO format and 60° geometry allow the insert to be used for both external and internal turning when the correct boring bar or internal holder is selected. How can machining data and compatibility be confirmed? Refer to Metav Werkzeuge for cutting parameters and holder compatibility; the TPMT110208‑PS T9225 (SKU 6781211‑Tungaloy) can be specified with recommended speeds and feeds for targeted steel grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated cemented carbide, proven chip control and a compact 60° triangular geometry for reliable medium to heavy steel turning; order directly via Metav Werkzeuge or consult their specialists for application guidance. TPMT 110208 T9225 – ISO triangular turning insert for turning, 60° geometry (Tungaloy) TPMT110208-PSS T9225 is an ISO‑standard triangular indexable insert for turning applications, designed for medium to heavy steel machining with a CVD‑coated cemented carbide grade and a 0.8 mm corner radius. CVD-coated carbide grade T9225 Triangle 60° geometry for external/internal turning 0.8 mm corner radius for durable cutting edge Cylindrical hole with 40°–60° single-side countersink Geometry engineered for stable, predictable turning performance The 60° triangle geometry provides a compact cutting face that is well suited to both external and internal turning operations, while the ISO conformity ensures compatibility with standard toolholder systems. Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; matching these elements delivers secure clamping and consistent engagement. The insert’s profile supports repeatable indexation and makes tool changes rapid, contributing to shorter setup times and improved process reliability on the shop floor. Coating and grade tuned for mixed and interrupted cuts The T9225 grade combines a wear‑resistant substrate with a CVD‑coated surface to balance hardness and toughness for medium to heavy steel machining. This composition increases resistance to abrasive wear while maintaining enough edge strength for slightly interrupted cuts or variable engagement conditions. The supplied PSS chipbreaker promotes controlled chip formation, reducing the likelihood of long, stringy chips and improving evacuation; the result is fewer stoppages and a better surface finish, which together enhance overall productivity and lower cost per component. Practical dimensions and system integration for workshop use Key dimensions such as the 0.8 mm corner radius, 2.38 mm thickness and the triangular shape are selected to deliver a stable cutting edge and predictable wear progression under typical turning loads. The insert incorporates a cylindrical hole with a single‑side countersink (40°–60°), allowing use with standard clamping screws and shims; the ISO designation and size (110208 / 11 mm) simplify selection of matching holders and accessories. When combined with an appropriate external holder, shim set and replacement screws, the system enables fast insert indexing and consistent component tolerance achievement. Contact Metav Werkzeuge for tailored advice on Tungaloy turning inserts and secure the correct grade and chipbreaker for the intended steel application – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781121 Manufacturer SKU: TUN6781121 Label: TPMT110208-PSS T9225 Manufacturer article number: 6781121 Facts Geometry: 60° Corner radius: 0.8 mm Thickness: 2.38 mm Size: 11 mm Clearance angle: 11° Special features Coating: CVD Grade: T9225 Chipbreaker: PSS Hole style: Cylindrical hole + single-side countersink (40°–60°) Shape: Triangular Material: Cemented carbide FAQ What materials is this insert suited for? The TPMT110208‑PSS T9225 insert is specified for medium to heavy steel turning thanks to its CVD‑coated cemented carbide composition and the T9225 grade tailored to such workpieces. How does the PSS chipbreaker affect machining? The PSS chipbreaker on the insert promotes short, controllable chips and improved evacuation; this reduces interruptions and supports a steadier surface finish during turning operations. How to ensure holder compatibility with the ISO insert? Compatibility is achieved by matching the holder to the insert’s form, clearance angle (11°), tolerance class, fastening method, size and thickness (2.38 mm) so the insert seats and clamps correctly in the toolholder. Is the TPMT110208‑PSS suitable for interrupted cuts? Yes. The T9225 grade provides extra toughness for variable engagement conditions and light interruptions, offering a compromise between wear resistance and edge strength. Which dimensions should be considered when planning a tool setup? Key values are the 11 mm size, 2.38 mm thickness, 0.8 mm corner radius and the 60° triangular geometry; these determine clamping, edge engagement and achievable depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110208 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of high toughness, consistent wear resistance and precise geometry for reliable medium to heavy steel turning. The CVD-coated carbide grade T9225 delivers stable chip control and extended tool life, while the ISO‑compliant form ensures straightforward holder compatibility. Order the insert directly via Metav Werkzeuge or consult our advisors for application support. TPMT110208-TM T9225 – ISO triangular turning insert, CVD-coated carbide (Tungaloy) The TPMT110208-TM T9225 is an ISO-standard triangular turning insert designed for robust external and internal turning applications, optimised for medium to heavy steel machining. ISO triangular insert TPMT110208-TM CVD-coated carbide grade T9225 0.8 mm corner radius for robust cuts 11° clearance angle and central hole Reliable performance for medium to heavy steel turning The combination of a CVD-coated carbide substrate with the T9225 grade offers a balance of hardness and toughness tailored to medium to heavy steel operations. This makes the insert particularly suitable where engagement conditions vary or slight interruptions occur, as the grade provides the fracture resistance required for stable cutting. The durable coating improves wear resistance under typical turning speeds, which contributes to longer tool life and reduced tool-change frequency — a clear gain in process efficiency. Precision geometry that simplifies holder compatibility Manufactured to ISO‑standard dimensions, the triangular form with a 60° included angle and a 0.8 mm corner radius delivers predictable cutting behaviour and repeatable part quality. Important geometric data such as the 11° clearance angle, plate thickness 2.38 mm and plate size 11 mm determine fitment; the central feature is a cylindrical hole with a one‑sided countersink (40°–60°) for secure fastening. Compatibility with an external holder is governed by form, clearance, tolerance class, fastening type, size and thickness, allowing straightforward selection of suitable toolholders and clamping sets. Stable chip control and economical machining The integrated chipbreaker TM and the robust carbide matrix enable controlled chip formation and evacuation, reducing the risk of edge damage and workpiece surface defects. The CVD coating supports a stable cutting edge at elevated temperatures, extending performance under continuous operation. When matched correctly to the workpiece material and machining parameters, this insert can lower overall machining costs through improved productivity and fewer interruptions. Technical consultation is available from Metav Werkzeuge for optimal grade and chipbreaker selection according to the specific application. Contact Metav Werkzeuge for tailored recommendations on Tungaloy inserts and order the TPMT110208-TM T9225 through Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781493 Manufacturer SKU: TUN6781493 SKU: 6781493-Tungaloy Designation: TPMT110208-TM T9225 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Included angle: 60° Clearance angle: 11° Thickness: 2.38 mm Plate size: 11 mm Special features CVD-coated carbide grade T9225 Chipbreaker TM Triangular plate form Central cylindrical hole with one-sided countersink (40°–60°) ISO code 110208 Application: Turning Suitable for medium to heavy steel machining FAQ What materials is this insert suitable for? The TPMT110208-TM T9225 insert from Tungaloy is designed primarily for medium to heavy steel machining and performs well under slightly interrupted cuts thanks to the tougher T9225 grade. Which chipbreaker is fitted and what is its purpose? This insert features the chipbreaker TM, which promotes controlled chip formation and safer evacuation during turning operations to protect the cutting edge and the workpiece. How is compatibility with tool holders determined? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO‑standard TPMT110208-TM geometry ensures matching holders can be selected accordingly. What are the key geometric specifications of the insert? Key values include a 0.8 mm corner radius, 60° included angle, 11° clearance and a plate thickness of 2.38 mm; the insert has a central hole with a cylindrical bore and a one‑sided countersink (40°–60°). Is the cutting material coated and how does that affect performance? Yes — the insert is a CVD-coated carbide in grade T9225, providing enhanced wear resistance and a stable cutting edge for prolonged performance in steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 AH6225 TM Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade optimised for stainless steels, a reliable TM chipbreaker and precise ISO geometry for consistent medium-duty turning performance — order directly via Metav Werkzeuge or request advice from our consultants. TPMT 110302 AH6225 TPMT turning insert — PVD-coated carbide, 60° triangle, Tungaloy A TPMT 110302 AH6225 turning insert designed for external and internal turning, delivering a sharp yet stable cutting edge for medium machining of stainless steels and similar alloys PVD-coated carbide AH6225 Optimised for stainless steels 60° triangular form, 0.2 mm radius Central hole with 40°–60° countersink Precision geometry for predictable turning results The triangular 60° form and 0.2 mm corner radius provide a balance between strength and accessibility, making the insert suitable for a wide range of external and internal turning tasks. The PVD-coated carbide composition of the AH6225 grade is engineered to maintain a sharp cutting edge under varying conditions, which supports steady chip formation and reliable surface finish. Because the insert conforms to ISO standards, toolholders and clamping systems that match the listed form, relief angle and size ensure repeatable positioning and process stability. Reduced setup time through compatible design and chip control Compatibility with the toolholder is determined by shape, relief angle, tolerance class, clamping method, size and thickness; the central hole with a cylindrical bore and one-sided countersink (40°–60°) simplifies secure fastening. The integrated TM chipbreaker is tuned for medium cutting depths, improving chip evacuation and reducing vibration. With a plate thickness of 3.18 mm and the ISO designation embedded in the geometry, the insert supports fast changeovers and predictable tool life, which reduces downtime and increases productive cutting time. Better productivity and longer service life in mixed production The AH6225 grade combines a wear-resistant PVD surface with a substrate designed for a stable cutting edge, delivering economic performance across batches with varying workpiece materials and conditions. For shops processing a variety of stainless steels, this universality cuts inventory complexity while maintaining surface quality and repeatable component tolerances. Where material adhesion and heat build-up are concerns, the coating improves thermal resistance and wear behaviour, often extending the effective lifetime compared with uncoated grades. For reliable medium-duty turning operations, request the Tungaloy TPMT 110302 AH6225 inserts from Metav Werkzeuge for fast supply and expert consultation — contact Metav Werkzeuge via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss application details and compatibility Technical Data Article number: 6951487 SKU: 6951487-Tungaloy Manufacturer SKU: TUN6951487 Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Insert size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 60° Special features Grade/coating: AH6225, PVD-coated carbide Chipbreaker: TM Plate form: triangular Hole: cylindrical hole with one-sided countersink (40°–60°) Typical application: external and internal turning of stainless steels FAQ Which toolholders are compatible with this insert? Compatibility depends on the holder matching the insert form, relief angle, tolerance class, clamping method, size and thickness; the TPMT 110302 AH6225 insert uses standard ISO geometry and requires a holder that accepts 60° triangular inserts with a central hole and 3.18 mm thickness. Is this grade suitable for stainless steels? Yes — the AH6225 grade and its PVD-coated carbide surface are formulated as a universal choice for stainless steels, offering a sharp, stable cutting edge for medium machining and varying conditions. What does the TM chipbreaker do for the machining process? The TM chipbreaker improves chip control during medium-depth cuts, aiding evacuation and reducing vibration, which supports consistent surface finish and longer tool life when using the TPMT 110302 AH6225 insert. How important is the central hole and countersink specification? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure and repeatable clamping; this is critical for positional accuracy and repeatable cutting performance with ISO-standard toolholders. Can this insert be used for internal turning as well as external? Yes — the triangular form, corner radius and chipbreaker design make the insert suitable for both external and internal turning operations when paired with the appropriate holder and machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 AH6225 Wendeplatten - Tungaloy
Take advantage of the proven combination of a PVD-coated AH6225 carbide grade and a 0.2 mm corner radius for stable machining of stainless steels and predictable tool life; order the insert directly via Metav Werkzeuge or consult our specialists for selection and optimisation. TPMT 110302 AH6225 triangular turning insert by Tungaloy — PVD-coated carbide, ISO standard The TPMT 110302 AH6225 is a triangular ISO turning insert designed for medium-duty external and internal turning operations on stainless steels. TPMT110302 triangular insert, 11 mm size PVD-coated carbide AH6225 for stainless steel 0.2 mm corner radius for precise turning Cylindrical hole with single-side countersink Stable chip control for reliable stainless steel turning The combination of a PVD-coated surface and the AH6225 carbide grade delivers stable cutting-edge behaviour when machining stainless steel, reducing the risk of built-up edge and rework. The single-side chipbreaker is matched to medium cutting conditions and promotes consistent chip formation, which translates into fewer interruptions and improved process efficiency. This focused performance reduces scrap and helps maintain cycle-time reliability on serial production. Geometry that preserves accuracy and extends tool life A 0.2 mm corner radius and the triangular form provide a balanced contact area for turning tasks where dimensional accuracy matters. The insert’s 11° clearance angle and a robust 3.18 mm plate thickness ensure low vibration and reduced flank wear under varying cutting conditions. These geometric attributes support repeatable part quality and make tool life more predictable, enabling planners to set dependable tool-change intervals and maintain output consistency. ISO compatibility for quick integration and safe clamping The ISO conformity of the insert simplifies selection and replacement across established tool holders and boring bars, shortening set-up time on the shop floor. The insert is supplied with a hole featuring a cylindrical bore and a one-sided countersink (40°–60°), which aids secure clamping and consistent seat positioning. As part of an ISO insert system, the component fits into a tooling assembly comprising an appropriate holder, shim and clamp, allowing straightforward inventory management and rapid re-indexing during maintenance. For tailored application advice or to source the Tungaloy TPMT110302 AH6225 insert through Metav Werkzeuge, contact our technical team for availability and compatibility checks: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6951468 Manufacturer SKU: TUN6951468 Stock SKU: 6951468-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Core data Corner radius: 0.2 mm Clearance angle: 11° Included angle: 60° Plate thickness: 3.18 mm Plate size: 11 mm Manufacturer article number: 6951468 Special features Designation: TPMT110302 Grade: AH6225 Coating/type: PVD-coated carbide Plate form: triangular Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Typical application: turning FAQ What materials is this insert best suited for? The insert is optimised for stainless steel applications; the AH6225 grade and PVD coating provide reliable performance on a wide range of austenitic and ferritic stainless steels. Which toolholders are compatible with this ISO insert? Compatibility is determined by ISO form, clearance angle, tolerance class, fastening and thickness; the TPMT110302 fits standard ISO triangular turning holders when matched by those parameters. How does the chipbreaker influence machining? The single-sided chipbreaker on this insert promotes controlled chip formation under medium cutting conditions, improving surface finish and reducing interruptive chip behaviour. Can the insert geometry help with dimensional control? Yes, the 0.2 mm corner radius and 11° clearance angle reduce deflection and flank wear, supporting consistent part dimensions and repeatable quality. What does the supply include for mounting and replacement? The insert is an ISO-format triangular plate; a matching holder, shim and clamping set are required for assembly and are typically stocked separately as part of a tooling system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that combines a sharp, stable cutting edge with a universal suitability for stainless steels, and benefit from an ISO‑compliant triangular insert that integrates easily into standard holders; order directly via Metav Werkzeuge or ask their consultants for application advice. TPMT 110302 AH6225 — Triangular turning insert with TSF chipbreaker (Tungaloy) TPMT110302-TSF AH6225 is a triangular ISO‑standard insert designed for external and internal turning where a durable, sharp edge and reliable chip control are required PVD-coated carbide grade AH6225 Universal for stainless steels Triangular insert with central hole 0.2 mm nose radius, 11° relief angle Consistent cutting performance for medium turning The PVD‑coated carbide AH6225 provides a balance between edge sharpness and wear resistance, allowing stable performance during medium machining of stainless steels. The PVD layer enhances surface hardness and reduces built‑up edge, which means the insert retains a sharp edge for longer intervals and contributes to predictable tool life. For production environments where repeatable part quality is critical, this grade reduces the need for frequent index changes and helps maintain cycle‑time consistency. Easy integration into ISO tool systems As an ISO‑standard triangular insert, the module is straightforward to fit into compatible holders: compatibility depends on geometry, relief angle, tolerance class, fastening method, size and thickness. The TPMT110302-TSF form features a central cylindrical hole with a one‑sided countersink (40°–60°) for secure clamping, and a 3.18 mm plate thickness that matches common clamping sets. The 11° relief angle ensures sufficient clearance for turning operations while the 0.2 mm nose radius delivers a fine profile that supports good surface finish. Defined chip control and application guidance The TSF chipbreaker is configured to support a wide range of cutting conditions and to encourage stable chip formation when machining stainless steels under variable feeds and depths of cut. Use of the appropriate chipbreaker and the AH6225 grade helps mitigate problems typical of stainless materials, such as built‑up edge and long, stringy chips. Typical applications include external and internal turning operations where a compromise between economy and surface quality is required; select cutting data according to workpiece rigidity and machining strategy. Practical advantages for workshop productivity A small 0.2 mm nose radius is suitable where dimensional control and a smooth finish are priorities, while the triangular shape offers three indexable cutting corners for economical tool use. The PVD coating supports repeatable cutting results and contributes to extended insert life under intermittent cutting conditions. For mixed production runs or setups where tool change frequency impacts throughput, this insert provides a measurable improvement in operating stability. Choose Tungaloy quality for reliable turning of stainless steels and contact Metav Werkzeuge for tailored advice or fast supply at info@metav-werkzeuge.com or on +49 2822 7131930 Technical data Article number: 6951474-Tungaloy Manufacturer SKU: TUN6951474 Model series: ISO turning inserts Insert designation: TPMT110302-TSF Grade: AH6225 Material: carbide Core specifications Size: 11 mm Thickness: 3.18 mm Nose radius: 0.2 mm Relief angle: 11° Included angle: 60° ISO code: 110302 Features PVD-coated carbide TSF chipbreaker Triangular insert with central hole Cylindrical hole with one‑sided countersink (40°–60°) Suitable for turning (external and internal) Universal grade for stainless steels FAQ What material is this insert optimised for? The TPMT110302-TSF AH6225 insert is a universal grade optimised for stainless steels, offering a balanced edge for medium turning tasks. Which toolholders are compatible with this insert? Compatibility depends on holder form, clearance, tolerance class, fastening and insert thickness; the TPMT110302-TSF designation and its central hole with countersink allow fitting to standard ISO triangular external holders. What surface finish can be expected with a 0.2 mm nose radius? A 0.2 mm nose radius typically yields a fine profile and good surface finish while retaining acceptable edge strength for finishing and light to medium finishing passes. How does the TSF chipbreaker benefit machining? The TSF chipbreaker promotes controlled chip formation under varied cutting conditions, reducing problematic long chips and improving process stability when machining stainless steels. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 AH725 Wendeplatten - Tungaloy
Take advantage of proven process reliability and the universal cutting behaviour of the AH725 grade combined with the compact indexable design for uninterrupted turning operations. The combination of a PVD-coated carbide grade, ISO triangular geometry and a secure cylindrical hole with countersink ensures stable clamping and consistent performance — order directly via Metav Werkzeuge or contact our consultants for application details. TPMT110302 AH725 Tungaloy – ISO triangular turning insert, PVD-coated carbide, 60° geometry The TPMT110302 AH725 is a triangular ISO turning insert for external and internal turning, engineered as a universal, fracture-resistant grade for Stahl and rostfreier Stahl and compatible with standard 60° holders. PVD-coated AH725 for high wear resistance Universal grade for Stahl and rostfreier Stahl ISO triangular insert, 60° geometry Cylindrical hole with countersink 40°–60° Stable machining even with mixed materials The PVD-coated AH725 grade delivers a balance between toughness and wear resistance that suits variable workshop demands. As a carbide insert with a fracture-resistant formulation, it is particularly effective where material batches include both Stahl and rostfreier Stahl. The practical benefit is fewer insert changes and a steadier cycle time; for operations with smaller tool overhangs or higher demands on process security, this results in more predictable throughput and less scrap. The coating also helps reduce adhesive build-up at elevated cutting temperatures, improving surface finish and tool life. Secure clamping and precise geometry for consistent cuts The triangular shape with a nominal cutting angle of 60° and a relief angle of 11° provides a robust support surface in standard toolholders. The insert’s cylindrical hole with one-sided countersink (40°–60°) ensures accurate seating and repeatable clamping by the screw, reducing micro-movements that can degrade dimensions. A corner radius of 0.2 mm supports finishing passes without compromising strength. Together these features improve dimensional stability and make holder compatibility straightforward when the correct form, clearance, tolerance class, fastening and thickness are observed. Coating and grade explained for better decision-making The PVD-coated layer on this insert increases resistance to abrasive wear while preserving edge toughness. For customers less familiar with coating technology: PVD (physical vapour deposition) forms a thin, hard film that reduces flank and crater wear without significantly softening the cutting edge. The result is a longer interval between indexings and consistent surface quality. Selecting the AH725 sort offers a universal compromise: better fracture resistance than some harder grades, and improved wear control compared with uncoated grades—ideal for workshops machining mixed steels and rostfreier Stahl. Practical workshop advantages and setup notes This ISO insert is supplied in the standard TPMT110302 format and matches common ISO toolholders when the holder’s specifications—form, clearance angle, tolerance class, fastening, size and thickness—are observed. The plate thickness of 3.18 mm and compact 11 mm size make it suitable for light to medium-duty turning where secure seating and small radii are required. The single-sided chipbreaker design promotes predictable chip flow for many turning tasks, reducing the risk of tangling and supporting stable, repeatable cycles on both external and internal operations. Contact Metav Werkzeuge for tailored advice on Tungaloy AH725 inserts and secure, prompt supply through Metav Werkzeuge; further technical details are available from our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6865361 Manufacturer SKU: TUN6865361 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/coating: AH725, PVD-coated Numbers / Core data Thickness: 3.18 mm Size: 11 mm Cutting angle: 60° Relief angle: 11° Corner radius: 0.2 mm Designs / Special features Shape: triangular Hole: with cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Application: Drehen (external and internal turning) Compatibility: ISO standard insert, secure clamping via screw FAQ What materials is this insert suitable for? The answer: The TPMT110302 AH725 insert is intended primarily for Stahl and rostfreier Stahl, offering a universal balance between toughness and wear resistance for mixed batches. How does the PVD coating affect performance? The PVD-coated AH725 grade reduces abrasive wear and helps maintain a sharper edge at higher temperatures, so the insert sustains longer cutting intervals in turning applications. Which holder features are required for correct fitment? Correct fitment depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the TPMT110302 format matches standard 60° triangular holders when these parameters are observed. Is this insert suitable for finishing passes with small radii? Yes, the 0.2 mm corner radius and the 3.18 mm plate thickness support fine finishing cuts while maintaining edge robustness for light to medium-duty operations. Does the insert include a chipbreaker? Yes, the insert features a one-sided chipbreaker designed to promote controlled chip evacuation during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110302 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH8015 grade, ISO compatibility and a stable cutting geometry to achieve dependable turning of heat‑resistant alloys; order directly via Metav Werkzeuge or consult the specialists for matching holders and clamping sets. TPMT110302 AH8015 — ISO triangular turning insert (11 mm, 60°) by Tungaloy The TPMT110302 AH8015 is an ISO‑standard triangular turning insert designed for external and internal turning, offering balanced wear resistance and edge stability for heat‑resistant alloys. PVD-coated AH8015 grade for heat-resistant alloys ISO 110302 triangular form, 60° cutting angle 11 mm size, 3.18 mm thickness for stable clamping Cylindrical hole with one-sided countersink 40°–60° Dependable wear resistance for heat‑resistant alloys The PVD-coated AH8015 grade combines a wear‑resistant coating with a robust carbide substrate to extend edge life when machining elevated‑temperature materials. This composition offers a measured compromise between flank wear resistance and cutting‑edge stability, which translates to fewer insert changes and more consistent component quality. In practical terms, a PVD coating reduces chemical wear and adhesion on hot workpieces, so production runs remain predictable and tool interventions are reduced. Accurate fit and secure clamping for consistent results The ISO designation and triangular 60° geometry ensure compatibility with standard holders when matched for form, relief angle and tolerance. The insert’s 11 mm size and 3.18 mm plate thickness give a secure seating in the pocket, while the 0.2 mm corner radius supports fine finishing without sacrificing edge strength. The cylindrical central hole with a one‑sided countersink (40°–60°) provides reliable fixation and repeatable positioning, which helps maintain concentricity and reduces vibration during turning. Controlled chip formation and higher process reliability Equipped with a one‑sided chipbreaker and optimised geometry, this grade improves chip control when turning less stable workpieces and heat‑resistant alloys. Better chip evacuation reduces rework risk and minimises cycle interruptions, contributing to higher throughput and lower per‑part manufacturing costs. The balanced design supports both roughing and finishing passes when combined with appropriate cutting parameters and a holder matched to the insert’s tolerance class. Practical selection guidance for workshop integration Choose the insert geometry and chipbreaker that correspond to the workpiece material, machining strategy and machine stability: lighter cuts with the small corner radius for tight tolerances, or more robust setups when removing larger volumes. The ISO system simplifies replacement and inventory management, while the AH8015 composition is recommended as a first choice for general turning of heat‑resistant alloys. For a complete system, order a compatible external holder or boring bar plus the necessary support shim and replacement screws to guarantee repeatable performance. For tailored recommendations on holder compatibility or to purchase matching components, contact Metav Werkzeuge — our technical advisors will assist with selection and supply. Technical Data Article number: 6951469 SKU: 6951469-Tungaloy Manufacturer SKU: TUN6951469 Model series: ISO turning indexable inserts Designation: TPMT110302 AH8015 Core technical data Insert size: 11 mm Plate thickness: 3.18 mm Corner radius: 0.2 mm Relief (clearance) angle: 11° Included angle: 60° Materials & special features Material: PVD‑coated carbide (AH8015) Shape: triangular Hole: cylindrical hole with one‑sided countersink (40°–60°) Chipbreaker: one‑sided Typical application: turning System components: insert, holder/boring bar, support shim/clamping set, replacement screws Compatibility determined by form, relief, tolerance class, fixing, size and thickness FAQ What materials is this insert best suited for? The AH8015 grade and PVD‑coated carbide substrate are optimised for machining heat‑resistant alloys; the insert is a first choice for general turning tasks on such materials. How does the 0.2 mm corner radius affect the machining result? A 0.2 mm corner radius provides a fine cutting edge for improved surface finish while retaining sufficient edge strength for lighter finishing cuts with reduced burr formation. Is the TPMT110302 compatible with standard ISO holders? Yes, the ISO designation and triangular form ensure compatibility with ISO‑standard holders when the holder matches form, relief, tolerance class, fixing method, size and thickness. What benefit does the PVD coating provide? The PVD coating increases chemical resistance and reduces built‑up edge on hot materials, extending tool life and stabilising cutting forces during extended runs. Can the insert be used for both external and internal turning? The triangular geometry and chipbreaker design support both external and internal turning operations, provided an appropriate external holder or boring bar is selected. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com