TPMT 110304 AH6235 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade AH6235 and a triangular ISO geometry with a 0.4 mm corner radius delivers stable chip formation and improved resistance to edge breakage in interrupted turning operations; ideal where machining of stainless steel requires robust performance. Order the insert directly via Metav Werkzeuge or consult the technical team for application support. TPMT110304-PSS AH6235 — Indexable turning insert, PVD-coated carbide, 0.4 mm radius (Tungaloy) A TPMT110304-PSS AH6235 indexable insert intended for external and internal turning, optimised for stainless steel and interrupted cuts with an 11° clearance angle PVD-coated carbide grade AH6235 0.4 mm corner radius for delicate profiles 11° clearance angle for controlled cutting Triangular insert with cylindrical hole and countersink Consistent chip control for stainless steel turning The PVD coating combined with a carbide substrate and the tougher AH6235 grade provides controlled wear and stable cutting when machining stainless steel and mixed batches. The chipbreaker PSS is engineered to manage short, fragmented chips typical of interrupted cuts, which reduces the risk of built-up edge and unexpected tool failures. Specified geometry and a 0.4 mm corner radius maintain surface integrity when producing fine profiles, so cycle times remain predictable and rework is minimised. Precision geometry and secure clamping for repeatable results A triangular ISO insert form with a central hole and a one-sided countersink (40°–60°) ensures reliable seating and clamping in compatible toolholders. The 11° clearance reduces rubbing on the flank face, lowering heat generation and improving edge life during continuous and stop-start operations. With a thickness of 3.18 mm and the ISO designation, compatibility is straightforward: holders are selected by form, clearance, tolerance class, fastening and insert size, enabling reproducible set-ups and minimised downtime. Process reliability and selection guidance for production environments The combination of grade AH6235 and the PSS chipbreaker balances toughness and wear resistance, making the insert suitable for applications with elevated breakout risk and varying material batches. For economical productivity, the grade supports stable chip formation across typical stainless alloys, while the triangular shape offers three usable cutting edges per indexable insert, contributing to overall cost-efficiency. Selection of holder stiffness and cutting parameters should match the insert’s properties to exploit its full potential in series production. For applications requiring consistent performance in stainless steel turning, contact Metav Werkzeuge for tailored advice on TPMT110304-PSS AH6235 inserts and suitable holders; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss supply and technical compatibility. Technical data Article number: 6890194-Tungaloy Manufacturer SKU: TUN6890194 Manufacturer article number: 6890194 Brand: Tungaloy Model series: ISO turning indexable inserts Core specifications Insert designation: TPMT110304-PSS Grade: AH6235 Chipbreaker: PSS Thickness: 3.18 mm Insert size: 11 Corner radius: 0.4 mm Clearance angle: 11° Included hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Angle: 60° Design & features Triangular insert shape Coating: PVD Material: carbide Application: turning (external and internal) Suited for: stainless steel, interrupted cuts, high chip-out risk System components: insert, compatible outer holder or boring bar, shim/clamping set, replacement screws FAQ What materials is this insert suitable for? The TPMT110304-PSS AH6235 is optimised for stainless steel and performs well in interrupted turning where the tougher AH6235 grade resists edge breakage. How does the chipbreaker PSS affect machining? The PSS chipbreaker on the TPMT110304-PSS AH6235 promotes short, controlled chips in stop‑start cuts, improving process security and reducing the chance of chip jams. What are the key dimensions and mounting details? The insert has a thickness of 3.18 mm, an insert size of 11 and a corner radius of 0.4 mm; it features a central cylindrical hole with a single-sided countersink for secure clamping. Can this insert be used for both external and internal turning? Yes, the indexable design and ISO geometry make the TPMT110304-PSS AH6235 suitable for both external and internal turning when paired with the correct holder. How many cutting edges are available per insert? The triangular format provides three cutting edges per insert, offering efficient use of the indexable stock. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 AH725 PSF Wendeplatten - Tungaloy
Combining a universal AH725 PVD-coated carbide grade with a 0.4 mm corner radius delivers dependable chip control and increased process reliability for mixed-steel turning operations; order the insert through Metav Werkzeuge or consult the advisers for application support. TPMT 110304 AH725 – TPMT110304-PSF triangular turning indexable insert for Turning by Tungaloy The TPMT110304-PSF AH725 is an ISO-standard triangular indexable insert designed for external and internal turning, offering a universal, break-resistant grade for steel and rostfreier Stahl. Universal PVD-coated carbide grade AH725 0.4 mm corner radius for fine contouring ISO TPMT 110304 compatibility with holders Cylindrical hole with 40°–60° countersink Consistent cutting results for mixed materials The PVD-coated AH725 grade combines wear resistance with stable chip formation, making it suitable where material types change frequently. The insert’s carbide substrate and surface coating reduce flank wear and support longer tool life, which in turn improves batch-to-batch consistency. For operations involving mild, alloyed or rostfreier Stahl, the geometry and coating aim to lower the risk of built-up edge and maintain dimensional accuracy on the workpiece. This results in fewer interruptions for tool changes and a more predictable production rhythm. Geometry engineered for process security A 0.4 mm corner radius and an 11° relief angle provide a balance between edge strength and finish capability: the radius supports robust edge life while enabling fine contouring where required. The insert’s triangular form distributes cutting forces and offers three usable cutting corners, improving cost efficiency per index. The incorporated PSF chipbreaker is matched to the grade to promote controlled chip formation at typical turning feeds, aiding machine uptime and reducing manual chip handling. Practical compatibility and handling benefits Designed to ISO dimensions, the plate is specified as TPMT110304-PSF with a 3.18 mm thickness and 11 mm inscribed circle, ensuring compatibility with standard TPMT holders provided form, relief and tolerance class align. The insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping and repeatable seating; this reduces setup variance and simplifies clamping checks. Replacement inserts are straightforward to stock and exchange, supporting quick changeovers in short-cycle production. Select applications and maintenance guidance This grade and geometry suit general external turning, light finishing passes and intermittent internal turning where process reliability matters more than aggressive metal removal. The combination of PVD coating and the insert profile lowers the tendency for edge chipping on smaller tools and where varying alloy content is encountered. For best results, match cutting parameters and coolant strategy to workpiece material and machining stability; the insert performs especially well under moderate speeds with steady feed for predictable chip control. For application-specific advice or to request availability of the Tungaloy TPMT110304-PSF AH725 insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for a tailored recommendation and supply options Technical data Article number: 6864922 Manufacturer SKU: TUN6864922 Model series: ISO-Drehwendeschneidplatten Name: TPMT110304-PSF AH725 Material: Hartmetall (carbide) Facts Inscribed circle: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Insert angle: 60° Manufacturer article number: 6864922 Special features Triangular insert form Cylindrical hole with single-sided countersink (40°–60°) Chipbreaker type: PSF Grade/coating: AH725 (PVD-coated) Intended application: Turning (external and internal) Suited for: Stahl and rostfreier Stahl FAQ What materials is this insert suitable for? The TPMT110304-PSF AH725 insert is formulated for machining Stahl and rostfreier Stahl, offering stable chip formation and good wear resistance across mixed-steel applications. How many cutting edges are available per insert? Each triangular TPMT-style insert provides three usable cutting corners, which increases economy per index for turning tasks. What clamping interface does the insert use? The plate is supplied with a cylindrical hole and a single-sided countersink (40°–60°) to match ISO-style TPMT holders and ensure repeatable seating. Is the grade AH725 coated, and what benefit does that provide? Yes — AH725 is a PVD-coated carbide grade; the coating enhances edge strength and reduces adhesive wear, improving process reliability for turning. Where can the Tungaloy TPMT110304-PSF AH725 be sourced? Availability and ordering can be obtained through Metav Werkzeuge; for technical matching and supply, refer to the article number 6864922 or SKU TUN6864922. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 AH725 Wendeplatten - Tungaloy
Take advantage of a universal, PVD-coated carbide grade that combines stable chip formation and wide material capability with simple ISO integration; the compact 60° triangular geometry and 0.4 mm corner radius deliver reliable finishing and process security. Order the insert directly via Metav Werkzeuge or request consultancy for holder compatibility and application advice. TPMT 110304 AH725 ISO turning insert, PVD-coated carbide, 60° triangle — Tungaloy TPMT 110304 AH725 is a triangular, ISO‑standard indexable insert designed for general turning operations where process security and material versatility are required PVD-coated carbide AH725 for process security Universal grade for steel and stainless steel 60° triangular geometry for versatile turning 0.4 mm corner radius for fine finishing Centre hole with countersink (40°–60°) for fixation Consistent chip control and reliable cutting performance The PVD‑coated carbide grade AH725 is formulated for stable chip formation across a broad range of steels, including stainless steel, making it a safe choice for mixed‑material batches and reduced tool inventory. The PVD coating increases wear resistance and helps preserve the cutting edge under interrupted cuts; the combined effect is fewer tool changes and more predictable cycle times. For customers seeking repeatable results, the insert’s chipbreaker PS is matched to the grade to support controlled chip curl and evacuation, contributing directly to higher productivity and lower scrap rates. Smooth integration into ISO tooling systems for quick changeovers Being ISO‑standardised, the insert fits established ISO turning systems when the holder’s shape, clearance, tolerance class, fastening, size and thickness match the insert’s specifications. The geometry features a 60° triangle and an 11° clearance angle, while the plate thickness of 3.18 mm ensures robust seating in modern external holders and boring bars. The central hole combined with a cylindrical bore and single‑side countersink (40°–60°) provides secure clamping and repeatable positioning during high‑speed index changes. This compatibility reduces setup time and simplifies inventory management in mixed‑tool shops. Geometry tuned for surface quality and small‑tool applications A 0.4 mm corner radius enables a balance between strength and surface finish: small radii reduce cutting forces for fine finishing, while still offering sufficient edge support for light interruption and profiling. The 60° triangular form gives three indexed corners per insert, optimising cost per cutting edge for external turning and internal operations where smaller diameters or compact tooling is required. Specifying the correct chipbreaker and the AH725 grade helps prevent edge chipping on small tools, maintaining part tolerances and reducing rework. Application guidance and selection advice for stable machining Intended primarily for turning, the insert is suitable for both external and internal operations where a universal, fracture‑resistant grade is advantageous. The combination of AH725 and the PS chipbreaker is particularly recommended when material batches change or when process reliability is paramount. When integrating the insert into an existing toolchain, confirm holder compatibility by matching the ISO designation, thickness and seat geometry; if uncertainty remains, consult technical data or Metav Werkzeuge’s application experts for cutting data and holder recommendations. The model TPMT110304‑PS AH725 offers a pragmatic mix of durability and versatility for production and jobbing environments. Contact Metav Werkzeuge for availability, holder compatibility checks and application recommendations for Tungaloy AH725 inserts at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6856678 SKU: 6856678-Tungaloy Manufacturer item number: TUN6856678 Model series: ISO-Drehwendeschneidplatten ISO designation: TPMT110304-PS Grade: AH725 Facts Geometry angle: 60° Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 mm Clearance angle: 11° Special features Material: carbide (hardmetal) Coating: PVD Chipbreaker: PS Plate form: triangular Hole: with cylindrical hole + single‑side countersink (40°–60°) Application: turning (external and internal) Intended use: universal, fracture‑resistant for steel and stainless steels Manufacturer: Tungaloy FAQ What materials is this insert suitable for? The AH725 PVD‑coated grade is intended for a wide material spectrum and is particularly suited to steel and stainless steel applications; its universal character supports changing workpiece materials without frequent insert exchanges. How does the chipbreaker PS affect machining? The PS chipbreaker promotes controlled chip formation and evacuation, reducing the risk of entanglement and improving surface finish during turning operations with the AH725 grade. Which holders are compatible with this insert? Compatibility depends on matching the ISO plate form, 3.18 mm thickness, seat geometry and fastening type; confirm the holder accepts TPMT‑style triangular inserts with a 11° clearance angle and central hole with countersink. What benefits does the 0.4 mm corner radius offer? A 0.4 mm radius provides a compromise between edge strength and surface quality, helping to achieve fine finishes while maintaining resistance to edge chipping in light interrupted cuts. Is this an original Tungaloy product and which SKU should be ordered? The product is an original Tungaloy indexable insert listed under SKU 6856678-Tungaloy and manufacturer item number TUN6856678; specify the ISO designation TPMT110304‑PS AH725 when ordering to ensure the correct grade and chipbreaker. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide AH725, a 0.4 mm corner radius and ISO compatibility for consistent, secure turning operations; order the TPMT110304‑PSS AH725 directly via Metav Werkzeuge or ask their consultants for application advice. TPMT110304 AH725 TPMT – ISO turning insert for external and internal turning (Tungaloy) The TPMT110304‑PSS AH725 is an ISO‑standard turning insert designed for external and internal turning of steel and stainless steels, offering a universal, breakout‑resistant grade for stable process performance. ISO turning insert TPMT110304‑PSS PVD‑coated AH725 carbide grade 0.4 mm corner radius for precision 11° relief angle for dependable cutting Reliable cutting with a universal PVD‑coated grade The PVD‑coated AH725 grade provides a balance of wear resistance and toughness that supports a wide range of steels and stainless steels; this makes the insert particularly suitable where material mixes or smaller tool sizes demand stable chip control. The PVD coating reduces friction at the cutting edge and extends tool life under variable cutting conditions, while the breakout‑resistant substrate maintains edge integrity during interrupted cuts. These combined characteristics translate into fewer tool changes and improved machining uptime. Secure clamping and precise geometry for repeatable results Compatibility with the clamping system depends on form, relief angle, tolerance class, fastening method, size and thickness. The triangular plate form and 60° included angle provide a stable seating in compatible holders, and the plate’s cylindrical hole with single‑sided countersink (40°–60°) ensures repeatable positioning and secure fixation. With a plate thickness of 3.18 mm and a controlled tolerance class, the insert delivers the rigidity required for predictable cutting forces and consistent surface finish across series production. Selectable chip control and geometry for process security The supplied PSS chipbreaker should be matched to the workpiece material and machining strategy: choose the chipformer and grade pairing that best fits roughing or finishing operations to exploit the insert’s strengths. The 0.4 mm corner radius offers a compromise between strength and surface finish, suitable for medium‑to‑fine turning tasks, while the 11° relief angle helps to reduce rubbing and minimise heat build‑up. Together, these features support higher process security and contribute to more reliable cycle times and reduced rework. Contact Metav Werkzeuge for tailored advice on applying the Tungaloy TPMT110304‑PSS AH725 and to discuss immediate availability via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6864871 SKU: 6864871‑Tungaloy Manufacturer SKU: TUN6864871 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Application: Turning Designation: TPMT110304‑PSS AH725 Core specifications Corner radius: 0.4 mm Included angle: 60° Relief angle: 11° Plate thickness: 3.18 mm Plate size: 11 Special features Grade: AH725 Coating: PVD‑coated Material: Carbide Chipbreaker: PSS Plate form: Triangular Hole: Cylindrical hole + single‑sided countersink (40°–60°) ISO designation: TPMT110304‑PSS FAQ What materials is this insert suitable for? The TPMT110304‑PSS AH725 is designed primarily for machining steel and stainless steels, with the AH725 grade providing universal, breakout‑resistant performance across variable workpiece materials. Which chipbreaker should be chosen for roughing operations? For roughing, select a more aggressive chipformer matched to the PSS geometry and the AH725 grade to ensure effective chip segmentation and evacuation during heavier cuts. How does the PVD coating affect performance? The PVD coating on the AH725 grade lowers friction at the cutting edge and increases wear resistance, which contributes to longer tool life and improved surface quality under typical turning conditions. Is the insert compatible with standard ISO holders? The insert follows ISO plate dimensions; compatibility depends on holder form, relief angle, tolerance class, fastening and plate thickness, so confirm holder specifications against the insert geometry. What benefits does the 0.4 mm corner radius deliver? A 0.4 mm corner radius balances edge strength and surface finish, offering improved edge robustness compared with smaller radii while still enabling fine surface quality for medium‑duty turning. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 110304 AH725 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated carbide AH725 grade and the PM chipbreaker for consistent chip control and high process security in turning operations; order the insert directly via Metav Werkzeuge or ask our consultants if further technical advice is required. TPMT 110304 AH725 – Turning indexable insert, PM chipbreaker, Tungaloy The TPMT 110304 AH725 is an ISO‑standard triangular indexable insert for turning, optimised for steel and stainless steels with a PM chipbreaker and an 11° relief angle TPMT 110304 triangular insert PM chipbreaker for reliable chip control PVD‑coated carbide grade AH725 11° rake, 0.4 mm corner radius Secure chip control for uninterrupted production The insert combines a PM chipbreaker with a PVD‑coated carbide grade to deliver predictable chip formation under varied cutting conditions. The chipbreaker geometry reduces the risk of long, stringy chips and enables higher feed rates without compromising component quality. For workshop managers and process engineers this translates into fewer interruptions, reduced scrap rates and better machine utilisation. The design supports both external and internal turning where consistent chip evacuation is critical. Compatibility and repeatable mounting for process safety Specified as an ISO‑standard turning insert, this geometry ensures straightforward replacement within matching holders; compatibility depends on form, relief angle, tolerance class, fixation, size and thickness. The insert’s 11° relief and standard triangular form simplify toolholder selection and spare‑part management across production lines. The central hole with a cylindrical bore and single‑sided countersink (40°–60°) secures repeatable clamping and reduces positional variation, aiding reproducible results in serial production. Broad material coverage and efficient tool life The AH725 grade delivers a universal, break‑resistant performance particularly suited to steel and stainless steels, making it a practical choice for mixed‑material shops and smaller tools that demand high process reliability. The 0.4 mm corner radius balances strength and edge life with dimensional accuracy on turned components. PVD coating enhances wear resistance at elevated temperatures, improving stand life and lowering total tooling costs per part. For operations aiming to increase throughput without sacrificing surface finish, this insert offers a well‑balanced solution. For robust, repeatable turning performance choose the Tungaloy TPMT 110304 AH725—contact Metav Werkzeuge for ordering and tailored technical guidance. Technical Data Article number: 6856726 Manufacturer SKU: TUN6856726 SKU: 6856726-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: TPMT110304-PM AH725 Data Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Size: 11 mm Special features Material: Carbide (Hartmetall) Coating: PVD‑coated Grade: AH725 Chipbreaker: PM Shape: Triangular Hole style: With hole — cylindrical hole + one‑sided countersink (40°–60°) Application: Turning (external and internal) Compatibility: ISO‑standard insert for matching holders, base and clamp sets FAQ What materials is this insert suitable for? The TPMT 110304 AH725 insert is designed for use with steel and stainless steels; the AH725 grade offers a universal, break‑resistant performance across these materials. Which chipbreaker is fitted and what is its benefit? This grade features a PM chipbreaker that promotes controlled chip formation, improving evacuation and reducing machine stoppages during turning. How is the insert secured in the holder? The insert uses a central cylindrical hole with a one‑sided countersink (40°–60°) to allow secure, repeatable clamping in compatible ISO holders. What are the key dimensional data to check for holder compatibility? Check thickness (3.18 mm), size (11 mm), included angle (60°), corner radius (0.4 mm) and relief angle (11°) when matching the insert to a toolholder. Is the coating suitable for higher cutting temperatures? Yes; the PVD coating improves wear resistance at elevated temperatures and contributes to longer tool life in demanding turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 110304 AH8015 TSF Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated AH8015 cemented carbide grade, an ISO‑compliant triangular form and a compact 0.4 mm corner radius for reliable turning of heat‑resistant alloys; order directly via Metav Werkzeuge or consult the technical team for holder compatibility and system setup. TPMT110304 AH8015 indexable turning insert — PVD‑coated carbide, 0.4 mm radius (Tungaloy) The TPMT110304-TSF AH8015 is an ISO‑standard indexable insert engineered for general turning of heat‑resistant alloys, combining wear resistance and edge stability for consistent production. PVD-coated AH8015 carbide grade ISO-standard triangular insert, 11° clearance 0.4 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink High productivity through balanced grade and coating The combination of a PVD‑coated surface and the AH8015 grade offers a balance between wear resistance and edge stability, making the insert particularly suited to machining heat‑resistant alloys. The coating reduces adhesive wear at elevated temperatures while the cemented carbide substrate maintains cutting edge integrity; together this extends tool life and reduces tool changes, supporting a more efficient machining process and lower overall cycle times. Consistent clamping and ISO compatibility for repeatable results Compatibility with toolholders is defined by form, clearance angle, tolerance class, fastening, size and thickness. The insert’s ISO designation (110304) and 11° clearance ensure secure seating in standard triangular holders and boring bars. The 60° included angle provides a familiar geometry for external and internal turning, simplifying tool selection and replacement in mixed‑machine environments and supporting predictable part quality across production batches. Geometry and chip control engineered for surface quality The 0.4 mm corner radius is optimised to deliver a fine surface finish without sacrificing edge life in finishing passes. The TSF chipbreaker is designed to control chip formation for the targeted material class, reducing risk of long swarf and improving chip evacuation. A cylindrical hole with a one‑sided countersink (40°–60°) ensures positive clamping and repeatability, while the 3.18 mm thickness contributes to rigidity and vibration resistance for stable cutting conditions. Practical system approach and application guidance This insert is part of a system comprising an ISO indexable plate, a compatible external holder or boring bar, a shim/clamp set and replacement screws. Selection of the correct chipbreaker and grade should match the workpiece material, machining strategy and machine stability. For general turning tasks in heat‑resistant alloys, the combination of PVD coating, AH8015 grade and TSF chip control provides a pragmatic and productive solution for series production as well as small batches. For reliable performance with Tungaloy AH8015 turning inserts, contact Metav Werkzeuge to confirm holder compatibility and current availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6825773 Manufacturer SKU: TUN6825773 SKU: 6825773-Tungaloy Model series: ISO turning indexable inserts Material: cemented carbide Grade: AH8015 Facts Insert designation: TPMT110304-TSF ISO code: 110304 Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Special features PVD-coated cemented carbide TSF chipbreaker Triangular plate form Cylindrical hole with one-sided countersink Compatibility by form, clearance, tolerance, fastening, size and thickness Intended for turning: external and internal System components: insert + external holder/boring bar + shim/clamp set + replacement screws FAQ Which materials is this insert best suited for? The TPMT110304-TSF AH8015 insert is optimised for machining heat‑resistant alloys, offering a balance between wear resistance and edge stability appropriate for those materials. How is holder compatibility determined for this insert? Compatibility is determined by insert form, clearance angle (11°), tolerance class, fastening method, size and thickness; matching these parameters with a suitable triangular holder ensures secure seating and repeatable results. What advantage does the PVD coating bring? A PVD‑coated surface on the AH8015 grade reduces adhesive wear at elevated temperatures and improves resistance to abrasion, extending service life in demanding turning applications. What is the function of the TSF chipbreaker on these plates? The TSF chipbreaker promotes controlled chip formation for the intended material group, improving chip evacuation and reducing the likelihood of long swarf that can interfere with workpiece quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 AH8015 Wendeplatten - Tungaloy
Combine the PVD‑coated AH8015 grade with a compact 0.4 mm corner radius and 11° relief for a reliable balance of wear resistance and cutting‑edge stability in the machining of heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult the technical team for holder compatibility. TPMT110304-TM AH8015 – ISO triangular turning insert, 0.4 mm radius, 11° relief (Tungaloy) The TPMT110304-TM AH8015 is an ISO‑standard triangular turning insert designed for external and internal turning of heat‑resistant alloys with a focus on stable edge performance and broad machining versatility. PVD-coated carbide AH8015 for heat-resistant alloys 0.4 mm corner radius for consistent edge strength 11° relief angle for stable cutting geometry ISO triangular shape with central hole and countersink High productivity through balanced wear resistance The AH8015 grade is a PVD‑coated carbide formulated as a first choice for general machining of heat‑resistant alloys, offering a considered compromise between wear resistance and cutting‑edge stability. In practice, this balance reduces unplanned tool changes and supports longer tool runs, which contributes to improved machine utilisation and a more consistent surface finish. The applied coating increases thermal resistance at the cutting edge, which is particularly relevant when turning alloys that tend to work‑harden or generate elevated temperatures. Stable cutting geometry for repeatable results A combination of a 0.4 mm corner radius, 11° relief and a triangular 60° insert angle creates a robust cutting edge that copes well with variable feed and depth‑of‑cut conditions. The moderate corner radius enhances edge strength and helps avoid premature chipping during interrupted cuts, while the relief angle minimises rubbing and supports efficient chip formation. The insert’s 3.18 mm thickness and central hole with a cylindrical bore and single‑side countersink (40°–60°) ensure secure clamping in standard ISO holders, maintaining positional repeatability and dimensional stability in serial production. Easy integration into ISO turning systems As part of an ISO series, the plate integrates into standard turning tool systems where compatibility is defined by form, relief angle, tolerance class, fastening, size and thickness. The system build typically comprises the ISO insert, a matching external holder or boring bar, a seating pad or clamp set and replacement screws. Selecting the correct chipbreaker (TM) and insert grade for the workpiece material and machining strategy enables a predictable machining window and reliable surface quality, simplifying process planning and reducing setup iterations. For consistent, productive turning of heat‑resistant alloys, request technical advice from Metav Werkzeuge or order the TPMT110304-TM AH8015 insert via Metav Werkzeuge for availability and guidance on holder matching; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6825797 SKU: 6825797-Tungaloy Manufacturer SKU: TUN6825797 Manufacturer: Tungaloy Facts Insert angle: 60° Relief angle: 11° Corner radius: 0.4 mm Thickness: 3.18 mm Size: 11 Special features Material: carbide Grade/coating: AH8015 (PVD) Insert shape: triangular Hole: with hole; cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: TM Application: turning Model series: ISO turning inserts FAQ Which materials are best suited for this insert? The TPMT110304-TM AH8015 insert is primarily intended for heat‑resistant alloys; the AH8015 grade provides a balance of wear resistance and edge stability suited to such materials. Is the insert compatible with standard ISO triangular holders? Yes. The plate follows ISO dimensions and requires a holder matching the insert form, relief angle, tolerance class, fastening type, size and thickness. What does the TM chipbreaker offer in practice? The TM chipbreaker supports controlled chip formation in a range of turning conditions, improving surface finish and helping to avoid problematic long chips during both external and internal turning. How does the 0.4 mm corner radius affect cutting performance? A 0.4 mm radius strengthens the cutting edge against chipping and is advantageous for stable finishing passes or when occasional interruptions occur, while still allowing good surface integrity. Which reference is useful when ordering replacements? Use the manufacturer article number 6825797 or the SKU 6825797-Tungaloy when reordering to ensure the correct insert and grade are supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8015 and a PS chipbreaker in a 60° triangular geometry for efficient turning of heat‑resistant alloys; order directly via Metav Werkzeuge or ask our consultants for tailored recommendations. TPMT 110304 AH8015 – ISO turning insert, 60° triangle, Tungaloy The TPMT 110304 AH8015 is an ISO‑compliant triangular turning insert with a PS chipbreaker, intended for external and internal turning of heat‑resistant alloys and general turning applications. PVD-coated carbide AH8015 for heat-resistant alloys PS chipbreaker for controlled chip formation 60° triangular insert with 0.4 mm corner radius Central hole; cylindrical bore + 40°–60° countersink High productivity for heat‑resistant alloy turning The combination of a PVD coating and a wear‑resistant carbide substrate gives a well balanced performance between abrasion resistance and cutting‑edge stability. This composition was selected as a first choice for the general machining of heat‑resistant alloys, where temperature resistance and consistent tool life are decisive. With the PS chipbreaker, chips are shaped and evacuated predictably, which reduces interruptions and supports continuous production. The result is fewer tool changes and more stable cycle times in batch and single‑part turning. Precise mounting and ISO compatibility for safe clamping Designed as an ISO turning insert, compatibility with the toolholder depends on the insert form, 11° relief angle, tolerance class, fastening method, size and thickness. The insert is delivered with a central hole featuring a cylindrical bore and a single‑side countersink (40°–60°), ensuring secure positioning and repeatable clamping in standard external holders or boring bars. This precise interface reduces mounting variability and helps maintain concentricity and surface finish across multiple replacements. Predictable tool life to reduce process costs The AH8015 grade is engineered to offer a balanced mix of edge stability and wear resistance for general use on high‑temperature alloys. That balance leads to predictable wear behaviour, which in turn allows process planners to set reliable tool change intervals and to optimise inventory levels. By choosing a grade that harmonises durability with edge integrity, machining processes benefit from reduced scrap risk and consistent dimensional results, contributing to lowered overall manufacturing costs. Practical selection guidance for everyday turning For best results, match the PS chipbreaker and grade to the workpiece material and to the rigidity of the setup. The triangular geometry offers multiple indexing positions, increasing the number of available cutting edges per insert and improving cost‑efficiency. The 0.4 mm corner radius supports mixed finishing and light roughing operations; larger radii are better for heavier engagement. For bespoke recommendations on insert selection and cutting parameters, process data and stability considerations can be reviewed with technical advisors. For reliable machining of heat‑resistant alloys with the Tungaloy turning insert AH8015, request application advice from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss optimal chipbreaker and holder combinations. Technical data Article number: 6947710 Manufacturer SKU: TUN6947710 SKU: 6947710-Tungaloy Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: TPMT110304-PS AH8015 Material: carbide Coating: PVD Grade: AH8015 Application: Turning Core data Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Hole: with hole Special features PS chipbreaker for controlled chip formation Central hole; cylindrical bore + single‑side countersink (40°–60°) ISO‑standard insert geometry Suitable for external and internal turning Balanced wear resistance and edge stability for heat‑resistant alloys FAQ What materials is this insert intended for? This insert is designed for the machining of heat‑resistant alloys; the AH8015 grade and PVD coating provide a balance of wear resistance and edge stability for such materials. How is the insert mounted in a holder? Mounting is achieved via the central hole with a cylindrical bore and a single‑side countersink (40°–60°); this ensures secure positioning and compatible clamping in ISO‑compliant external holders or boring bars. What is the corner radius and how does it affect cutting? The corner radius is 0.4 mm; this radius is suitable for mixed finishing and light roughing, offering a compromise between edge strength and surface finish capability for turning operations. Can the chip formation be controlled with this insert? Yes — the PS chipbreaker is engineered to produce controlled chip shapes, improving chip flow and reducing the likelihood of entanglement in turning operations. Which product identifiers should be used when ordering? Use the designation TPMT110304‑PS AH8015 and the article number 6947710 or SKU 6947710‑Tungaloy to ensure the correct Tungaloy turning insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 AT9530 PS Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, a coated cermet grade optimised for surface quality, and compatibility with ISO holders to maintain smooth production. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. TPMT 110304 AT9530 — TPMT indexable turning insert for finishing (Tungaloy) The TPMT110304-PS AT9530 is an ISO-standard indexable turning insert designed for finishing and light turning of steel, offering a balance between surface quality and predictable wear. Coated cermet grade AT9530 for finishing Triangular ISO insert, 11° clearance Corner radius 0.4 mm for fine finish Cylindrical hole with 40°–60° countersink Compatible with standard TPMT holders Improved surface finish with a finishing-grade chipformer The coated cermet AT9530 grade focuses on surface finish and even wear, making it suitable for precision external and internal turning where appearance and dimensional consistency matter. The PS chipbreaker is engineered to support low to moderate depths of cut while promoting short, controllable chips that do not compromise the machined surface. For shops aiming to reduce rework and achieve consistent Ra values, this insert delivers measurable benefits through reduced built-up edge and predictable tool behaviour. Predictable cutting behaviour and longer productive runs A combination of the 0.4 mm corner radius and 11° clearance produces a gentle entry condition that helps avoid scalloping and micro-burrs on finished components. The plate thickness of 3.18 mm and the robust triangular form ensure stable mounting in a TPMT-compatible holder, contributing to vibration resistance and repeatable results across multiple indexings. These design choices translate into fewer insert changes and steadier cycle times on routine finishing passes. Simple selection and secure clamping for shop workflows The insert’s ISO designation and standardised geometry—triangular shape, size 11, and the specified cylindrical hole with single-sided countersink (40°–60°)—make it straightforward to match with existing toolholders. Choosing the correct chipbreaker and grade for the workpiece material and machine stability remains essential: select the PS chipbreaker and AT9530 grade for steels where surface integrity and uniform wear are priorities. The system setup typically includes the ISO insert, a matching outside holder, and the required clamp set and replacement screws for quick serviceability. Application efficiency and material guidance This insert is intended for finishing and light machining of steel, emphasising consistent surface quality and even wear rather than heavy stock removal. The ISO standard format enables predictable integration into established turning tool systems and simplifies inventory management. For applications requiring higher metal removal, consider a heavier-duty chipbreaker or a different grade optimised for roughing to preserve the finishing insert’s life and maintain overall process economy. Contact Metav Werkzeuge for tailored application advice on Tungaloy finishing inserts and request availability details by email or phone Technical Data Manufacturer article number: 6751401 SKU: 6751401-Tungaloy Manufacturer SKU: TUN6751401 Product label: TPMT110304-PS AT9530 Core data ISO designation: 110304 Insert shape: triangular Corner radius: 0.4 mm Clearance angle: 11° Thickness: 3.18 mm Size: 11 Hole: cylindrical hole + single-sided countersink 40°–60° Insert angle: 60° Features Coated cermet grade AT9530 Chipbreaker: PS Application: finishing and light turning of steel System: ISO insert compatible with TPMT holders Model series: ISO turning indexable inserts FAQ What materials is this insert suitable for? The coated cermet grade AT9530 is recommended for finishing and light machining of steel; the TPMT110304-PS insert excels where surface quality and uniform wear are required. How does the PS chipbreaker affect machining? The PS chipbreaker promotes short, controlled chips during finishing passes, improving surface integrity and making chip control more reliable with the AT9530 grade. Can this insert be used in standard TPMT holders? Yes, the insert follows ISO geometry (TPMT form) and is compatible with matching TPMT outside holders when clamped with the specified clamp set and screws. What is the recommended corner radius for fine finishing? The insert’s 0.4 mm corner radius is selected to deliver a fine surface finish while maintaining edge strength for normal finishing conditions. Which factors determine compatibility with a holder? Compatibility depends on form, clearance angle, tolerance class, fastening method, size, and thickness; the ISO specification and the listed dimensions allow straightforward matching. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 GH730 PF Wendeplatten - Tungaloy
Take advantage of a precisely balanced combination of carbide construction, an optimised GH730 grade and a reliable PF chipbreaker for stable, cost‑effective turning operations; order the insert directly via Metav Werkzeuge or contact the consultants for tailored application advice. TPMT 110304 GH730 — TPMT ISO turning insert for Turning by Tungaloy TPMT110304-PF GH730 is an ISO‑compliant triangular insert designed for external and internal turning, providing consistent chip control and edge stability in a variety of production environments. ISO‑compliant triangle insert PF chipbreaker GH730 grade for wear and toughness 11° clearance for reliable cutting geometry 0.4 mm corner radius for versatile finishing Consistent removal rates for productive turning The combination of carbide body and the GH730 cutting grade delivers a balance between wear resistance and toughness that supports predictable tool life and fewer interruptions to production. The PF chipbreaker is engineered for controlled chip formation, which reduces the likelihood of chip entanglement and helps maintain cutting forces within target ranges. For process planners this means more uniform cycle times and improved overall equipment effectiveness. Edge stability and surface quality for repeatable parts A 0.4 mm corner radius together with the 11° clearance creates a cutting geometry that reduces edge chipping and supports steady contact with the workpiece. The triangular form gives three usable cutting edges per index, improving cost efficiency per edge change. These geometric choices translate into finer surface finishes and fewer rework operations when compared with blunt or ungeometrised inserts. Simple integration into ISO tool systems The insert follows the ISO designation and features a cylindrical hole with a one‑side countersink (40°–60°) that suits standard clamping screws and ISO toolholders. Compatibility with a holder is determined by shape, relief angle, tolerance class, clamping method, size and thickness; the 3.18 mm thickness and 11 mm size align with many common external and internal turning assemblies. This makes retrofitting into existing tool systems straightforward and reduces inventory complexity. Selective grade and chip control for varying materials The GH730 grade extends the insert’s application range by combining wear resistance with sufficient toughness for interrupted cuts and medium to heavy machining in diverse materials. Selecting the PF chipbreaker and matching the insert to the correct holder ensures controlled chips and stable cutting for finishing and semi‑finishing passes. Where roughing or very hard materials are involved, adjust the machining parameters and toolholder rigidity to maintain optimal performance. For application support, sample recommendations or to order the TPMT110304-PF GH730 insert from Tungaloy, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for dedicated technical advice and supply. Technical data Article number: 6821017 Manufacturer SKU: TUN6821017 SKU: 6821017-Tungaloy Name: TPMT110304-PF GH730 Manufacturer: Tungaloy Facts ISO code: 110304 Included angle: 60° Corner radius: 0.4 mm Relief angle: 11° Plate thickness: 3.18 mm Size: 11 Hole: with hole Design and features Material: carbide Chipbreaker: PF Grade: GH730 (Tungaloy) Plate form: triangular Hole style: cylindrical hole + one‑side countersink (40°–60°) Model series: ISO turning inserts Intended use: Turning (external and internal) FAQ What materials is this insert intended for? The TPMT110304-PF GH730 insert from Tungaloy is designed for turning operations; the GH730 grade offers a balanced combination of wear resistance and toughness suitable for a wide range of workpiece materials when paired with the appropriate chipbreaker and holder. What is the corner radius and how does it affect surface finish? The insert has a 0.4 mm corner radius, which supports versatile finishing and semi‑finishing passes and helps achieve a finer surface quality while still offering edge strength for interrupted cuts. How is compatibility with a toolholder determined? Compatibility depends on the insert’s form, relief angle, tolerance class, clamping style, size and thickness; the ISO designation and the TPMT geometry make it compatible with matching ISO toolholders and clamping systems. What chip control does the PF chipbreaker provide? The PF chipbreaker is optimised for stable chip formation and controlled evacuation, reducing the risk of long stringy chips and improving process reliability during turning. Does the insert require a special screw or clamping method? The insert uses a cylindrical hole with a one‑side countersink (40°–60°) and is compatible with standard ISO clamping screws and conventional clamping methods for TPMT‑type inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 GH730 Wendeplatten - Tungaloy
Taking advantage of an ISO-indexed triangular geometry, a wear-resistant GH730 carbide grade and a PM chipbreaker, this insert delivers stable chip control and predictable tool life for turning operations; order directly via Metav Werkzeuge or consult the technical advisers for matching holders and process parameters. TPMT 110304 GH730 — TPMT110304-PM GH730 triangular ISO turning insert by Tungaloy TPMT110304-PM GH730 is an ISO-indexed triangular turning insert designed for general turning applications where reliable chip control and stable edge life are required ISO-indexed triangular insert TPMT format GH730 grade: wear-resistant carbide PM chipbreaker for stable chip control 0.4 mm corner radius, 11° relief angle Consistent productivity through optimised grade and geometry The combination of an ISO-indexed triangular format and the GH730 cutting grade provides a balance between wear resistance and edge stability that supports continuous production runs. The PM chipbreaker is engineered to promote reliable chip formation under varying cutting conditions, which reduces the risk of process interruptions. Compatibility with the toolholder is defined by form, relief angle, tolerance class, fastening method, size and thickness, so the insert’s dimensions and central hole ensure repeatable clamping and positional accuracy. These design choices translate into fewer unplanned stops and a steadier part output. Precision cutting edge for reproducible surface quality A small 0.4 mm corner radius and an 11° relief angle contribute to a stable cutting edge and predictable cutting forces, helping to maintain surface finish consistency across components. The triangular shape with a nominal 11 mm size and a 3.18 mm plate thickness creates a rigid seating area that supports moderate depths of cut while limiting insert deformation. The central hole with a cylindrical bore plus single-sided countersink (40°–60°) ensures secure fastening and concentric seating in compatible holders. Overall, the geometry supports reproducible results and simplifies process documentation for batch production. Process guidance and material-adaptable performance Intended for turning operations, the indexable plate is supplied in a carbide substrate tailored by Tungaloy to achieve a good compromise between hardness and toughness. The PM chipbreaker and the GH730 composition allow selection of feed and speed combinations according to workpiece stability and machining strategy; choose the chipbreaker and grade to match the specific material and operational rigidity. For internal and external turning tasks the system approach—insert combined with a matching outer holder or boring bar, clamp kit and replacement screws—ensures that the insert functions as part of a robust cutting assembly that is easy to document and repeat across setups. For advice on selecting the correct holder, chipbreaker or for immediate availability of Tungaloy inserts, contact Metav Werkzeuge to place an order or request an application recommendation — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6821018 Manufacturer SKU: TUN6821018 SKU: 6821018-Tungaloy Name: TPMT110304-PM GH730 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 0.4 mm Included angle: 60° Relief angle: 11° Plate thickness: 3.18 mm Plate size: 11 mm Special features Material: carbide Grade: GH730 Chipbreaker: PM Plate form: triangular Hole: cylindrical hole + single-sided countersink (40°–60°) FAQ What applications suit this insert best? This insert is designed for turning operations; the TPMT110304-PM GH730 plate is suitable for both external and internal turning when matched with an appropriate holder and operating parameters. How does the PM chipbreaker affect machining? The PM chipbreaker promotes controlled chip formation and evacuation under a range of cutting conditions, improving process stability and reducing the likelihood of built-up edge. What determines compatibility with a toolholder? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the TPMT110304-PM format and central hole specification are key for correct clamping. How does the corner radius influence results? A 0.4 mm corner radius provides a compromise between edge strength and surface finish, supporting consistent part quality while maintaining acceptable cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 GH730 Wendeplatten - Tungaloy
Take advantage of the combination of GH730 wear resistance, carbide base material and a proven PS chipbreaker for consistent turning performance; order directly via Metav Werkzeuge or consult our specialists for selection and application advice. TPMT 110304 GH730 ISO turning insert for turning – Tungaloy TPMT110304-PS GH730 is an ISO-format triangular turning insert designed for external and internal turning operations, offering a balance of wear resistance and edge stability for varied machining tasks. ISO triangular insert for turning applications GH730 grade for wear resistance and toughness PS chipbreaker for controlled chip formation Carbide body with 0.4 mm corner radius Reliable productivity and compatibility for series production The insert is manufactured from carbide and specified as grade GH730, which combines wear resistance, sufficient toughness and stable cutting-edge performance to support productive machining cycles. Compatibility with toolholders is dictated by the insert’s form, clearance angle, tolerance class, mounting style, size and thickness; these parameters ensure repeatable seating and clamping. The presence of a cylindrical hole with a single-side countersink (40°–60°) allows secure fastening in standard ISO clamping systems, reducing runout and promoting process stability. Geometry and cutting behaviour optimised for surface quality With a triangular plate form and a 60° included angle, the insert provides three usable cutting edges and enables access to diverse profiles. The 0.4 mm corner radius and 3.18 mm plate thickness are balanced to support both finishing and light-medium roughing operations: the small radius helps attain improved surface finishes on interrupted cuts while preserving edge strength where needed. The PS chipbreaker is configured to promote controlled chip segmentation during turning, which reduces re-cutting and improves heat evacuation—this yields more consistent part quality and longer edge life. Application guidance, tool system and economic benefits Designed for general turning, the insert suits a broad material range when the correct chipbreaker and grade are chosen for the workpiece and cutting conditions. Typical system assembly comprises the ISO turning insert, a matched external holder or boring bar, a shim/clamping kit and replacement screws; correct pairing minimises vibration and optimises tool life. By combining a robust carbide substrate with the GH730 specification and a proven chip control geometry, the insert supports steady process outputs and reduced tool-change frequency, which improves shop-floor throughput and lowers total cost per part. For specification clarifications or assistance with holder selection, technical queries may be directed to Metav Werkzeuge by email or phone. Contact Metav Werkzeuge for tailored advice on the Tungaloy GH730 grade and selection guidance to match specific turning tasks, or ask for application recommendations from our consultants at Metav Werkzeuge. Technical data Article number: 6821019 SKU: 6821019-Tungaloy Manufacturer SKU: TUN6821019 Facts Plate form: triangular Size: 11 Plate thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Application: turning Special features Material: carbide Grade: GH730 Chipbreaker: PS Mounting: cylindrical hole + single-side countersink (40°–60°) ISO-series: ISO turning insert Compatible with ISO clamping systems Designed for external and internal turning operations FAQ What materials is this insert suited for? The TPMT110304-PS GH730 insert is engineered as a general-purpose turning insert; the GH730 grade and carbide substrate provide broad material coverage, with the chipbreaker suited to many steels and mixed applications. How does the PS chipbreaker affect machining? The PS chipbreaker promotes controlled chip formation during turning, improving chip evacuation and reducing re-cutting, which contributes to a more stable machining process with consistent surface finish when using the TPMT110304-PS GH730. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s pocket geometry, clearance angle, tolerance class, fastening method, size and thickness; the insert’s cylindrical hole with countersink and ISO form allow use with standard ISO clamping holders designed for triangular plates. What are the key dimensions to check when replacing an insert? Verify size (11), plate thickness (3.18 mm), corner radius (0.4 mm) and clearance angle (11°) as these determine fit and cutting behaviour for the TPMT110304-PS GH730. Is this an original Tungaloy item and where is it made? This listing refers to the original Tungaloy turning insert TPMT110304-PS GH730 (Article number 6821019), produced to the manufacturer’s specifications for ISO-format turning plates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 GT9530 PSF Wendeplatten - Tungaloy
Benefit from the wear‑resistant coated cermet GT9530 and precise ISO geometry for consistent surface finish and extended tool life. Order the inserts directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. TPMT 110304 GT9530 — ISO turning insert, coated cermet, 11° clearance by Tungaloy TPMT110304-PSF GT9530 is an ISO‑standard triangular turning insert designed for finishing to light universal turning on steel under stable conditions ISO‑standard triangular insert Coated cermet GT9530 grade 0.4 mm corner radius 11° clearance angle and 60° included angle Precise finishing and reliable tool life for turning operations The triangular indexable insert delivers consistent surface quality thanks to the coated cermet composition and a geometry optimised for finishing and light universal turning. The cermet matrix of GT9530 combines wear resistance with good edge stability, which reduces micro‑chipping at the cutting edge and improves repeatability in production runs. Where a fine workpiece surface and extended tool life are required under stable machine and setup conditions, this geometry offers a controlled cutting action and predictable tool change intervals. Geometry that supports surface quality and stable cutting Key geometry elements support performance: the 0.4 mm corner radius provides a balance between robustness and fine finish, while the 11° clearance helps prevent rubbing and reduces built‑up edge in interrupted or unstable feeds. The 60° included angle of the triangular form reduces radial cutting forces and facilitates effective chip formation in most external and internal turning tasks. Together these features improve machined surface consistency and allow for slightly higher feed rates without compromising finish. Mechanical design and mounting details for secure clamping The insert has a 3.18 mm thickness and an inscribed size of 11 mm, dimensions that align with common ISO holder families; ensure holder compatibility by matching form, tolerance class and attachment method. The mounting hole is a cylindrical hole with a one‑sided countersink (40°–60°), enabling positive seating and secure clamping with the appropriate screw and clamp set. The PSF chipbreaker is tuned for steel machining, promoting controlled chip segmentation and evacuation, which reduces the risk of recutting and helps maintain a predictable wear pattern on the cutting edge. Application scope, benefits and operational efficiency Designed for turning of steel, this insert is particularly suitable when a combination of improved surface finish and longer tool life is the priority. The coated cermet composition supports finishing passes where minimal plastic deformation of the workpiece surface is desired. With consistent edge stability and predictable wear behaviour, workshops can plan maintenance and tool changes more effectively, contributing to process reliability and reduced unplanned downtime. For mixed production environments, the insert’s balance of performance and wear resistance enhances productivity over multiple batches. For technical matching, stock availability and tailored application support for Tungaloy GT9530 inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance and recommendations. Technical data Article number: 6998358-Tungaloy Manufacturer article number: 6998358 Manufacturer SKU: TUN6998358 Series: ISO turning indexable inserts Grade: GT9530 Cutting material: coated cermet Numbers / Core technical data Corner radius: 0.4 mm Thickness: 3.18 mm Inscribed size: 11 mm Clearance angle: 11° Included angle: 60° Hole: cylindrical hole + one‑sided countersink (40°–60°) Special features / Versions Triangular insert, ISO geometry PSF chipbreaker for steel turning Designed for finishing to light universal turning Compatibility determined by form, clearance angle, tolerance class, attachment, size and thickness FAQ What materials is this insert suitable for? The TPMT110304-PSF GT9530 insert is optimised for machining steel; the GT9530 coated cermet grade is formulated to deliver wear resistance and a fine surface finish in stable turning conditions. How does the PSF chipbreaker affect machining? The PSF chipbreaker promotes controlled chip segmentation when turning steel, improving chip evacuation and reducing the chance of recutting, which helps the insert maintain a consistent cutting edge over time. Which holders fit this ISO insert? Compatibility depends on matching the ISO geometry, 11° clearance, form, tolerance class and the insert thickness of 3.18 mm; select an external holder or boring bar designed for ISO 110304 triangular inserts. What does the hole and countersink specification mean for clamping? The cylindrical hole with a one‑sided countersink (40°–60°) enables positive seating and secure clamping with the correct screw and clamp set, ensuring stable mounting under turning loads. How does the 0.4 mm corner radius influence the finish and robustness? A 0.4 mm corner radius provides a compromise between a fine surface finish and edge strength; it reduces the risk of edge chipping during light finishing while allowing good surface results at typical finishing feeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade (GT9530), a 0.4 mm corner radius and a stable 11° clearance for consistent finishing and extended tool life; order the insert via Metav Werkzeuge or consult our specialists for application-specific selection and inventory availability. TPMT 110304 GT9530 — Turning ISO insert, coated cermet, 11° clearance | Tungaloy The TPMT110304-PS GT9530 is an ISO triangular turning insert engineered for finishing and light universal turning of steel under stable machining conditions. Wear-resistant GT9530 cermet coating 11° clearance for stable cutting geometry 0.4 mm corner radius for precise radiusing Cylindrical hole with 40°–60° countersink Consistent finishing and extended tool life through GT9530 The core advantage of the grade is the coated cermet composition, which combines the hardness and thermal stability of cermet substrates with a tailored coating for improved wear resistance. This results in a reliable surface finish during light finishing operations and longer intervals between indexings when the machining setup is rigid. For operations where a higher-quality surface is required rather than aggressive metal removal, the GT9530 grade provides a predictable balance between tool life and finish. The chip control element of the insert supports smooth chips under recommended feeds and stable clamping. Secure clamping and ISO compatibility for straightforward integration As an ISO turning indexable insert, compatibility with a tool holder is determined by form, clearance angle, tolerance class, fixation method, overall size and thickness. The triangular geometry with a 60° included angle and a 0.4 mm corner radius suits fine radiusing and edge stability. The insert incorporates a central hole with a cylindrical bore and a single-sided countersink (40°–60°) that facilitates positive location and repeatable clamping. The 11° clearance reduces rubbing on the flank face, decreasing heat build-up when finishing, and the 3.18 mm plate thickness contributes to bending resistance at the tool tip. Practical productivity gains in turning applications For external and internal turning where dimensional accuracy and surface quality are prioritised, this insert performs as a wear-resistant finishing to light general-purpose solution. The PS chipbreaker is designed to support consistent chip formation for steels in steady conditions, which can reduce cycle times caused by poor chip evacuation. Operators benefit from fewer interruptions for indexings and more repeatable part quality, leading to improved process efficiency and lower per-part tooling costs over production runs. Choosing the right setup and maintaining process reliability Selection of holder geometry, cutting data and coolant strategy influences the performance of the insert. In practice, pairing the insert with a suitably rigid holder and optimised feeds will exploit the GT9530 grade's strengths — stable edge, good surface integrity and reliable wear behaviour. Where uncertainty exists about holder compatibility or cutting parameters, technical consultation helps to match the insert to the turning task, ensuring the expected combination of finish and productivity is achieved. For application-oriented advice or immediate supply of Tungaloy TPMT110304-PS GT9530 inserts, contact Metav Werkzeuge – email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability. Technical data Article number: 6998372 SKU: 6998372-Tungaloy Manufacturer SKU: TUN6998372 Model series: ISO-Drehwendeschneidplatten WPL designation: TPMT110304-PS GT9530 Facts Included angle: 60° Clearance angle: 11° Thickness: 3.18 mm Corner radius: 0.4 mm Plate size: 11 Special features Coating / grade: GT9530 Cutting material type: coated cermet Chipbreaker: PS Central hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Plate form: triangular Application: Turning FAQ What materials is this insert best suited for? The TPMT110304-PS GT9530 insert is formulated as a wear-resistant finishing to light universal grade for steel, giving good surface quality and extended life in stable conditions. Can this insert be used for both external and internal turning? Yes. The triangular geometry and the specified dimensions make the insert suitable for both external and internal turning operations when paired with an appropriate holder and setup. What does the PS chipbreaker indicate for chip control? The PS chipbreaker is designed to promote consistent chip formation during finishing and light cutting of steel, aiding reliable chip evacuation under steady cutting conditions. How does the 11° clearance angle affect performance? An 11° clearance reduces flank rubbing and heat generation during finishing cuts, supporting better surface integrity and extended edge life compared with lower clearance values. Are there specific mounting requirements for this insert? The insert uses a central cylindrical hole with a single-sided countersink (40°–60°) for positive location; compatibility depends on holder form, fixation method, tolerance class and the insert thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 GT9530 Wendeplatten - Tungaloy
The combination of a coated cermet grade and precise geometry delivers consistent surface quality and extended tool life, while the standardized ISO form ensures straightforward holder compatibility. Benefit from improved process stability and predictable change intervals — order the insert directly via Metav Werkzeuge or consult our specialists for matching holders and screws. TPMT110304-PM GT9530 — TPMT 110304 GT9530 turning insert (ISO triangular), coated cermet, 11° relief — Tungaloy A TPMT110304-PM GT9530 ISO triangular turning insert designed for finishing to light general turning of steel, offering a coated cermet grade that prioritises surface finish and wear resistance in stable machining conditions. Coated cermet grade GT9530 for long life ISO triangular insert, 11 mm size 11° relief angle for stable finishing Cylindrical hole with single-sided countersink Consistent finishing performance with economical wear behaviour The insert's coated cermet composition (grade GT9530) combines a wear-resistant surface with a fine cutting edge that supports superior surface finish in steel turning applications. The relatively small 0.4 mm corner radius reduces edge contact area, enabling low cutting forces and fine finishing passes. In practice, this means fewer reworks and steadier surface quality during serial production, while the cermet coating extends life compared with uncoated grades under stable cutting conditions. Geometry and chip control tuned for finishing applications Built as a triangular ISO insert with an 11° relief angle, the geometry is optimised for external and internal turning where a smooth finish is required. The PM chipbreaker encourages predictable chip formation at low to moderate depths of cut, reducing the risk of built-up edge and improving repeatability. Compatibility to the holder is determined by form, relief angle, tolerance class, fastening, size and thickness, so selecting the correct seat and screw ensures secure seating and consistent cutting behaviour. Installation dimensions and process integration for reliable production Key dimensions such as the 3.18 mm thickness, 11 mm inscribed size and the cylindrical hole with single-sided countersink (40°–60°) simplify integration into common clamping systems and allow the use of standard screws and seats. The insert's 60° included angle provides three usable edges per insert, supporting efficiency in tool change intervals. For established production setups that favour stable cutting parameters, this insert achieves a balance of tool life and surface quality, contributing to predictable maintenance cycles and lower overall machining costs. Contact Metav Werkzeuge today for tailored selection of Tungaloy coated cermet inserts like the TPMT110304-PM GT9530 and assistance with holder compatibility and fast supply Technical data Article number: 6998380 Manufacturer SKU: TUN6998380 Item SKU: 6998380-Tungaloy Designation: TPMT110304-PM GT9530 Dimensions & measurable data Corner radius: 0.4 mm Thickness: 3.18 mm Inscribed circle / size: 11 mm Relief angle: 11° Included angle: 60° Materials & features Coated cermet GT9530 Carbide substrate PM chipbreaker Triangular ISO insert Cylindrical hole with single-sided countersink (40°–60°) Application: turning Model series: ISO turning inserts Holder compatibility defined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The TPMT110304-PM GT9530 is optimised for steel machining; the GT9530 coated cermet offers wear resistance and a fine cutting edge suited to finishing and light general turning of steel. How does the PM chipbreaker affect performance? The PM chipbreaker promotes controlled, short chip formation during finishing passes, improving surface finish and reducing the chance of built-up edge when the TPMT110304-PM GT9530 is used under stable cutting conditions. Which dimensional features determine holder compatibility? Compatibility depends on the insert form (triangular), 11° relief angle, thickness (3.18 mm), inscribed size (11 mm) and the hole/countersink style; matching these with the correct holder seat and fastening ensures secure clamping of the TPMT110304-PM GT9530. How many cutting edges are available per insert? With a 60° included angle, the triangular insert provides three usable cutting edges; the design supports economical index changes to keep production running. Is this insert suitable for roughing operations? The GT9530 grade is intended as a wear-resistant finishing to light universal grade; heavy roughing is not the primary application and may reduce tool life compared with grades engineered for roughing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 GT9530 Wendeplatten - Tungaloy
Take advantage of a coated cermet grade tuned for finishing and longer tool life, combined with a PF chipbreaker that supports consistent surface quality; order directly via Metav Werkzeuge or consult our application specialists for tailored advice. TPMT 110304 GT9530 – ISO turning insert (PF chipbreaker) by Tungaloy The TPMT110304-PF GT9530 is an ISO-standard triangular insert for external and internal turning, designed for finishing operations where surface quality and extended tool life are required Coated cermet grade GT9530 for long tool life PF chipbreaker for reliable finishing Triangular ISO insert, 3.18 mm thickness 0.4 mm corner radius for fine surface finish High-performance finishing with a coated cermet grade The combination of a coated cermet substrate and the GT9530 grade delivers a balance between hardness and toughness that is optimised for finishing cuts on steel. This composition reduces abrasion and thermal wear in stable conditions, which translates into longer tool life and fewer interruptions for index changes. The result is a predictable machining process with reproducible surface quality, making the insert particularly suitable where consistent part finish is a priority. Secure compatibility and straightforward tool system integration Compatibility with a clamping system is governed by the insert’s form, clearance angle, tolerance class, fastening style, size and thickness. The ISO designation ensures straightforward selection of the matching holder or boring bar. Where a reliable clamping interface is required, the system comprises the ISO insert together with an appropriate external holder or boring bar, a support shim or clamping set and replacement screws; this arrangement reduces the risk of misfit and minimises setup time while maintaining cutting stability. Controlled chip formation and application advice for turning The PF chipbreaker is tuned for finishing and light universal cuts, guiding small, manageable chips that help preserve the workpiece surface. With a 0.4 mm corner radius and an 11° clearance, the insert supports low cutting forces and fine surface results in external and internal turning. Select the PF breaker and GT9530 grade when machining steel under stable conditions and when the machining strategy prioritises surface quality over aggressive metal removal. Practical benefits for process efficiency and cost control Using an insert that combines a coated cermet grade with the PF breaker reduces the frequency of rework caused by poor surface finish and can lower tooling consumption over a production run. The ISO-standard form simplifies inventory management and replacement, while the robust coating supports repeatable performance. For operations focused on finishing passes, this configuration contributes to a more efficient workflow and predictable part quality. Contact Metav Werkzeuge for application guidance and to request availability of the Tungaloy TPMT110304-PF GT9530; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998353 Manufacturer SKU: TUN6998353 Model series: ISO turning inserts ISO designation: TPMT110304-PF Facts Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 Clearance angle: 11° Included angle: 60° ISO code: 110304 Special features Coated cermet grade GT9530 PF chipbreaker for finishing Triangular plate form With hole: cylindrical hole + one-sided countersink (40°–60°) Intended application: turning (external and internal) System components: ISO insert, matching external holder or boring bar, support shim/clamping set, replacement screws Suitable for steel machining FAQ What materials is this insert intended for? The TPMT110304-PF GT9530 is a coated cermet grade designed primarily for finishing and light universal operations in steel, offering improved surface quality and wear resistance. Which chipbreaker does the insert use and what is it best for? This insert features a PF chipbreaker, optimised for finishing cuts where controlled, short chips and a consistent surface finish are required. How is compatibility with the toolholder determined? Compatibility depends on the insert form, clearance angle, tolerance class, fastening, overall size and thickness; the ISO designation simplifies matching the correct holder or boring bar. What are the key dimensional details to note for setup? Important dimensions include the 0.4 mm corner radius, 3.18 mm thickness, 11° clearance angle and the triangular plate form with the specified hole style. Is this insert suitable for internal turning as well as external? Yes, the insert is specified for both external and internal turning; select the appropriate holder geometry and clamping to maintain stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 NS9530 PM Wendeplatten - Tungaloy
Take advantage of the combination of uncoated cermet NS9530, a PM chipbreaker and a precise 0.4 mm corner radius to achieve consistent finishing results with low cutting forces; order directly via Metav Werkzeuge or contact the consultants for holder compatibility and tooling advice. TPMT 110304 NS9530 ISO turning insert — uncoated cermet, 0.4 mm radius (Tungaloy) TPMT 110304-PM NS9530 is an ISO triangular turning insert designed for precision finishing of steel, offering low cutting forces and a sharp cutting edge for continuous cuts Uncoated cermet grade NS9530 PM chipbreaker for finishing 0.4 mm corner radius for fine finish ISO triangular 11 mm size, 3.18 mm thick Consistent finishing with low cutting forces The insert is an uncoated cermet (NS9530) designed as a finishing grade for steel. Cermet combines ceramic and metallic phases to produce a sharp, wear-resistant cutting edge that reduces friction and cutting forces; this makes the geometry particularly suited to continuous cuts and small depths of cut, where surface quality is critical. The result is improved first-pass accuracy and a reduced need for downstream grinding or polishing. The presence of a PM chipbreaker further refines chip formation, promoting stable machining and helping maintain the sharp edge over longer tool life. Reliable ISO compatibility and easy integration As an ISO‑standard triangular insert, the plate integrates into established tooling systems when matched by form, clearance angle, tolerance class, fastening method, size and thickness. The plate features a cylindrical hole with a one-sided countersink (40°–60°), enabling secure clamping with standard screw systems and underlay elements. Compatibility is determined by these mechanical interfaces rather than brand alone, which simplifies changeovers and inventory management in production environments. The ISO designation also aids specification in procurement and CAM programming, easing logistical workflows. Practical guidance for application and performance With a 0.4 mm corner radius and a 3.18 mm plate thickness, the insert is optimised for producing fine surface finishes at modest feed rates; the rounded corner reduces edge chipping risk while delivering consistent part geometries. The sharp cutting edge characteristic of the NS9530 grade lowers cutting forces, which helps when machining thin-walled components or features prone to vibration. Although tailored for steel finishing, the grade and chipbreaker selection should be matched to workpiece material and stability: choose the PM chipbreaker and finishing parameters for constant, stable cuts where surface integrity is a priority. This approach maximises productivity and reduces scrap, supporting efficient, repeatable machining operations. Contact Metav Werkzeuge for tailored tooling advice and to secure Tungaloy TPMT110304-PM NS9530 inserts; Metav Werkzeuge can confirm holder compatibility and supply matching underlays and fastening sets via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998555 SKU: 6998555-Tungaloy Manufacturer SKU: TUN6998555 Model series: ISO-Drehwendeschneidplatten ISO designation: 110304 Facts Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 mm Clearance/freedom angle: 11° Insert angle: 60° Countersink angle: 40°–60° Features PM chipbreaker Uncoated cermet, grade NS9530 Material listed: Hartmetall Triangular plate form With cylindrical hole and one-sided countersink Suitable for external and internal turning Designed for finishing of steel ISO-standard insert for compatible holders FAQ What materials is this insert best suited for? The Tungaloy TPMT110304-PM NS9530 is formulated as a finishing grade for steel, where its uncoated cermet composition and PM chipbreaker deliver low cutting forces and excellent surface finish. What does the PM chipbreaker do? The PM chipbreaker on the insert controls chip formation and evacuation during finishing cuts; it supports stable machining and consistent edge conditions for the NS9530 cermet grade. How to verify holder compatibility for this insert? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; confirm the ISO specification 110304 and the 11 mm plate size against the intended holder before assembly. Can this insert be used for internal turning? Yes — the ISO triangular plate and hole/countersink arrangement permit secure clamping for both external and internal turning operations when matched with a suitable holder. What effect does the 0.4 mm corner radius have on machining? A 0.4 mm corner radius reduces the risk of edge chipping while improving surface finish compared with smaller radii; it is particularly effective for fine finishing and features requiring tight surface tolerances. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 NS9530 PS Wendeplatten - Tungaloy
Take advantage of the combination of a fine cermet cutting grade, precise 60° triangular geometry and a PS chipbreaker for consistently high surface quality and reliable chip control. Order the inserts directly via Metav Werkzeuge or contact the consultants for application advice and holder compatibility. TPMT 110304 NS9530 turning insert — triangle 60°, PS chipbreaker (Tungaloy) The TPMT110304-PS NS9530 is an ISO triangular turning insert designed for finishing operations on steel, offering a sharp cutting edge, low cutting forces and a focus on excellent surface finish. ISO triangular insert, 60° geometry Cermet grade NS9530 for fine finishing PS chipbreaker optimised for continuous cuts Clamped mounting with countersunk centre hole Higher-quality finishes with lower cutting forces The uncoated cermet grade NS9530 delivers a consistently sharp edge suited to finishing passes on steel. Its microstructure reduces built-up edge formation and yields a higher surface finish with lower cutting forces, which decreases the need for downstream rework and shortens cycle times. For workshops prioritising part quality and repeatability, the insert’s geometry promotes stable engagement and predictable results during continuous turning operations. Predictable chip control for continuous turning Equipped with the PS chipbreaker, this insert is optimised for uninterrupted cuts and steady feeds. The chipform design steers swarf away from the cutting zone to reduce tool interference and machine stoppages, improving process reliability. Combined with a 60° triangular shape and an 11° relief angle, the insert supports a sharp cutting edge for small depths of cut and fine finishing, making it a suitable choice where consistent material removal and minimal vibration are required. Seamless integration with ISO clamping systems and practical handling The insert fits standard ISO clamping systems; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. The triangular plate with a countersunk centre hole enables secure clamping and straightforward replacement, reducing downtime during tool changes. For economical machining, the grade’s stable edge life promotes long runtimes between indexings, supporting a productive and cost-conscious workflow. The Tungaloy production standard ensures consistent geometry and repeatability. For tailored recommendations or toolholder matching, contact Metav Werkzeuge for application guidance and ordering assistance; technical experts are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997726 SKU: 6997726-Tungaloy Manufacturer SKU: TUN6997726 Designation: TPMT110304-PS NS9530 Facts Geometry: 60° Corner radius: 0.4 mm Relief angle: 11° Plate thickness: 3.18 mm Plate size: 11 mm Special features Uncoated cermet grade NS9530 PS chipbreaker for continuous cuts Triangular plate form Centre hole with cylindrical hole and single-sided countersink 40°–60° ISO-standard turning insert Application: turning (finishing on steel) FAQ Which materials is this insert suitable for? The NS9530 grade of the TPMT110304-PS insert is intended primarily for finishing operations on steel; the uncoated cermet composition is optimised for continuous cuts and high surface quality on standard steels. What benefit does the PS chipbreaker provide? The PS chipbreaker on the TPMT110304-PS produces controlled chip formation for continuous turning, reducing re-cutting and helping to maintain tool stability and surface integrity. How is holder compatibility ensured? Compatibility with a holder is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; the ISO triangular format and the countersunk centre hole facilitate use in standard clamping systems. Can the insert be used for internal turning? Yes, the ISO triangular geometry and the PS chipbreaker allow use in both external and internal turning applications, provided the holder and cutting parameters match the operation. What part numbers identify this product? This insert is listed as TPMT110304-PS NS9530, article number 6997726 and SKU 6997726-Tungaloy for ordering and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 NS9530 PSF Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and ISO compatibility for reliable turning operations; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. TPMT 110304 NS9530 — ISO triangular finishing insert for turning by Tungaloy A TPMT 110304 NS9530 is an ISO‑standard triangular turning insert designed for finishing passes on steel, offering a sharp cermet cutting edge and a small corner radius for superior surface quality. ISO triangular TPMT geometry Uncoated cermet NS9530 finishing grade 0.4 mm corner radius for fine finish Cylindrical hole with countersink for secure clamping Precise finishing where it matters The TPMT110304-PSF NS9530 combines a sharp cermet cutting edge with a small 0.4 mm corner radius to reduce cutting forces and consistently deliver a fine surface texture on steel components. As a finishing grade, the insert is optimised for continuous cuts and small depth‑of‑cut operations; this reduces vibration and helps maintain dimensional accuracy while producing the desired surface appearance. The material choice and geometry are specifically tuned to lower burr formation and to assist in achieving tighter tolerances during final passes. Compatibility and system requirements for smooth integration Compatibility with toolholders is governed by standard ISO characteristics: insert form, relief angle, tolerance class, fastening method, size and thickness. The insert fits into an ISO turning system comprising an outer holder or boring bar, a support shim or clamp set, and replacement screws. The 11° relief angle and triangular shape ensure predictable seating and repeatable positioning, while the cylindrical hole with a single‑sided countersink (40°–60°) improves clamp stability and repeatability during index changes. Selection guidance and application advantages Choose the PSF chipbreaker and the NS9530 grade when the priority is a low cutting force and high surface finish on steel. The uncoated cermet construction delivers a sharp edge that reduces built‑up edge tendency in continuous finishing cuts, making it particularly suitable where optical surface quality and minimal post‑processing are required. Operators benefit from extended uninterrupted cycle times and fewer rework operations when the grade and chipformer are matched to the workpiece material and machine stability. Practical notes on geometry and secure clamping The triangular form with an included angle of 60° and a thickness of 3.18 mm offers a stable seat in standard ISO TPMT pockets, while the nominal size of 11 mm balances edge life and accessibility in confined geometries. The cylindrical hole plus single‑sided countersink provides a positive mechanical register and reduces the likelihood of insert movement under cutting loads. These design choices combine to support predictable tool behaviour and simple indexation during multi‑edge use. For finishing‑critical turning tasks, specify the Tungaloy TPMT 110304 NS9530 via Metav Werkzeuge for reliable performance; for tailored advice on holder compatibility or machining strategy contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998534 SKU: 6998534-Tungaloy Manufacturer SKU: TUN6998534 Core data ISO designation: 110304 Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Countersink angle: 40°–60° Special features Shape: triangular Grade: uncoated cermet NS9530 Chipbreaker: PSF Hole: cylindrical hole with single‑sided countersink Material base: cemented carbide Application: turning, finishing System components: ISO turning insert, compatible outer holder or boring bar, support shim/clamp set, spare screws FAQ Is this insert compatible with standard ISO TPMT holders? Yes. The insert follows ISO TPMT geometry and will be compatible with holders that accept the 110304 form, taking into account form, relief, tolerance, fastening and thickness. For which materials is the NS9530 grade recommended? The NS9530 uncoated cermet is specified for finishing operations on steel and is optimised for continuous cuts and small depths of cut to achieve superior surface quality. Can the insert be used for internal and external turning? The insert is suitable for both external and internal turning applications when mounted in the correct outer holder or boring bar and when the machining strategy matches the insert’s finishing design. What benefit does the 0.4 mm corner radius provide? A 0.4 mm corner radius balances edge strength with the ability to produce a fine surface finish, reducing vibration and improving dimensional control during finishing passes. What is the purpose of the PSF chipbreaker and the countersunk hole? The PSF chipbreaker is designed for finishing chip control under stable cutting conditions, while the cylindrical hole with a single‑sided countersink ensures secure clamping and repeatable positioning in ISO toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, low cutting forces and secure ISO compatibility for a reliable turning process; the combination of an uncoated cermet grade and a PF chipbreaker supports excellent surface quality and productive, continuous cutting. Order via Metav Werkzeuge or consult the advisors for application-specific selection. TPMT 110304 NS9530 — ISO turning insert for turning, Tungaloy, PF chipbreaker, 0.4 mm radius A TPMT110304-PF NS9530 ISO turning insert designed for finishing operations on steel, offering a sharp cutting edge, low cutting forces and consistent surface quality in continuous cuts. Triangle insert, 60° cutting angle Uncoated cermet NS9530 for finishing PF chipbreaker for continuous cutting 0.4 mm corner radius, 11° clearance Precision finishing for steel components The uncoated cermet grade NS9530 is optimised for finishing applications on steel, delivering a high surface finish with reduced tendency to build up a flank edge. Its sharp cutting edge and inherently low cutting forces make it particularly suitable for continuous cuts and small depth-of-cut operations; this reduces the need for subsequent finishing and helps maintain dimensional accuracy. As a result, machining cycles can be streamlined and rework reduced, supporting a more efficient production flow. Secure mounting and ISO compatibility Compatibility with toolholders is determined by form, clearance, tolerance class, clamping method, size and thickness. The indexable plate follows the ISO standard form and is supplied with a central hole and single-sided countersink for reliable clamping. The combination of a 60° geometry, 11° clearance and a triangle outline ensures stable seating in appropriate external or internal turning holders. When choosing a holder, match the insert's thickness and size to the toolbody and verify the tolerance class to ensure repeatable positioning and optimum cutting engagement. Process guidance and economic benefits The PF chipbreaker is intended for continuous machining where controlled chip formation and smooth evacuation are priorities. The small 0.4 mm corner radius assists in achieving fine surface finishes while limiting cutting forces at light cuts. With a plate thickness of 3.18 mm, the design balances rigidity and accessibility, allowing precise finishing without unnecessary bulk. Selecting this insert for finishing tasks helps reduce cycle time and tool changes, offering an economical solution for shops focused on consistent results and predictable tool performance. Contact Metav Werkzeuge for tailored advice on Tungaloy finishing inserts and to arrange supply — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6998525 Manufacturer SKU: TUN6998525 Model series: ISO turning inserts Designation: TPMT110304-PF NS9530 Facts Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Cutting angle: 60° Special features Uncoated cermet grade NS9530 PF chipbreaker for continuous cutting Triangle shape with central hole Cylindrical hole + single-sided countersink 40°–60° FAQ Which materials are best for this insert? The TPMT110304-PF NS9530 is formulated as a finishing grade for steel; the NS9530 uncoated cermet offers low cutting forces and high surface quality when machining steel. What machining modes suit the PF chipbreaker? The PF chipbreaker is optimised for continuous cutting; it delivers controlled chip formation and smooth evacuation, making it suitable for finishing passes and stable cutting conditions with the TPMT110304-PF. How can compatibility with a holder be checked? Compatibility depends on form, clearance angle, tolerance class, clamping and plate size/thickness; confirm the ISO form and match the insert's 11° clearance, 3.18 mm thickness and 11 mm size to the chosen holder before use. Is the insert suitable for internal turning? Yes, the insert supports both external and internal turning when mounted in a compatible holder; geometry and chipbreaker selection should match the workpiece and rigid setup to achieve the intended finish. What are the key identification details for ordering? Order using the designation TPMT110304-PF NS9530 or manufacturer article number 6998525; the item is an ISO turning insert supplied by Tungaloy, SKU 6998525-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 110304 NS9530 Wendeplatten - Tungaloy
Inconsistent product data detected: the dataset lists the cutting material as both "carbide" and "uncoated cermet". Please verify and correct the source information before a full product description can be generated, as accurate and consistent data is essential for ensuring the reliability of the product details, avoiding potential confusion for customers, and maintaining the integrity of the information provided. Discrepancies like this can lead to errors in manufacturing, inventory management, and customer satisfaction, so it is crucial to address and resolve such issues promptly by cross-referencing the original data sources and confirming the correct material specifications.
TPMT 110304 NS9530 Wendeplatten - Tungaloy
The combination of ISO‑standard triangular geometry, a sharp uncoated cermet cutting edge and a dedicated TSF chipbreaker ensures superior surface finish and consistent performance in finishing turns; order the TPMT110304‑TSF NS9530 directly via Metav Werkzeuge or ask our consultants if needed. TPMT110304‑TSF NS9530 – Triangular turning insert for precision finishing, Tungaloy The TPMT110304‑TSF NS9530 is a triangular ISO turning insert designed for fine finishing of steel components with continuous cuts and small depths of cut, delivering low cutting forces and excellent surface quality. ISO triangular insert TPMT 110304 for turning Uncoated cermet grade NS9530 for fine finishing TSF chipbreaker for continuous cuts 60° geometry with 0.4 mm corner radius Precision finishing where surface quality matters The insert is an indexable finishing solution optimised for turning operations on steel. Its uncoated cermet composition, identified as NS9530, provides a sharp cutting edge that reduces cutting forces and improves surface integrity in single‑pass finishing. This combination is particularly effective where dimensional accuracy and low roughness are priorities, as the material and edge form minimise built‑up edge and promote a stable cut. By choosing this finishing grade, shops gain repeatable part quality without resorting to excessive cutting parameters. Reliable chip control for continuous cutting strategies A core strength lies in the TSF chipbreaker geometry that supports continuous cutting and small feed rates. The triangular shape with 60° included angle and a 0.4 mm corner radius gives predictable contact conditions and consistent edge strength, helping to avoid chatter in stable setups. Compatibility with ISO holders depends on matching insert form, clearance angle, tolerance class, fastening and thickness; the insert’s 3.18 mm thickness and central hole with a cylindrical bore plus single‑side countersink (40°–60°) ensure secure clamping for most standard external holders. These design choices translate into fewer interruptions, higher productivity and reliable surface results during finishing passes. Application guidance and benefits for production environments This uncoated cermet grade is intended as a finishing choice for steel workpieces under continuous cutting conditions and small depths of cut. The combination of low cutting forces and a stable cutting edge reduces thermal and mechanical loading, often extending effective edge life and maintaining part tolerances over longer production runs. For shops seeking to standardise on inserts for high‑quality finishes, this solution supports predictable process windows, simplifies grade selection and complements carbide roughing grades in a balanced machining strategy. For Tungaloy finishing inserts such as the NS9530 grade, contact Metav Werkzeuge for current availability and holder compatibility — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and order handling. Technical data Article number: 6945277 Manufacturer SKU: TUN6945277 Manufacturer item number: 6945277 Facts Shape: triangular (60°) Corner radius: 0.4 mm Plate size: 11 Plate thickness: 3.18 mm Clearance angle: 11° Special features Material: cemented carbide Grade: NS9530 (uncoated cermet) Chipbreaker: TSF Hole style: cylindrical hole + single‑side countersink (40°–60°) Typical application: turning, finishing of steel FAQ What materials is this insert suitable for? The TPMT110304‑TSF NS9530 is specified for finishing operations on steel and is optimised for continuous cuts with small depths of cut. How does the TSF chipbreaker affect performance? The TSF chipbreaker on the insert improves chip control during continuous cutting, supporting stable cutting conditions and consistent surface quality. Which holder characteristics are required for correct mounting? Compatibility depends on matching the insert form, clearance angle, tolerance class, fastening method, size and thickness; the insert’s central hole and countersink are designed for standard ISO external holders. What finish can be expected using this cermet grade? The uncoated NS9530 grade delivers a sharp cutting edge and low cutting forces, resulting in improved surface finish compared with many roughing grades when used in finishing passes. Is the corner radius suitable for fine detail work? The 0.4 mm corner radius provides a balance of edge strength and small‑feature capability, making it appropriate for fine finishing without sacrificing robustness. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 110304 T5115 CM Wendeplatten - Tungaloy
The combination of CVD-coated cemented carbide T5115 and the ISO‑compliant TPMT110304‑CM geometry delivers consistent edge stability and reliable wear resistance for cast iron turning, while the 0.4 mm corner radius maintains dimensional accuracy. Order the insert directly via Metav Werkzeuge or contact our advisers for support in selecting the optimal grade and chipbreaker for the application. TPMT110304-CM T5115 – ISO triangular turning insert for turning, CVD‑coated carbide, 0.4 mm corner radius | Tungaloy The TPMT110304‑CM T5115 is an ISO‑standard triangular indexable insert designed for general turning applications, offering a universal grade optimised for cast iron machining. CVD‑coated cemented carbide T5115 ISO‑compliant triangular insert 0.4 mm corner radius for precision 11° relief angle with cylindrical hole Consistent machining performance for cast iron The CVD‑coated T5115 grade provides a balanced combination of wear resistance and cutting edge stability, specifically formulated for machining cast iron. The coating reduces flank wear at elevated temperatures and extends tool life under interrupted cuts. Together with the triangular plate geometry and chipbreaker CM, the insert supports stable chip control and reliable surface finish during both external and internal turning, enabling more predictable cycle times and lower machining costs. Precise form and secure clamping for repeatable results The ISO‑conformant insert geometry, including a 0.4 mm corner radius and a 11° relief angle, ensures repeatable dimensional accuracy across tool changes. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) that match standard clamping systems; compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness. This design reduces set‑up variation and simplifies insert indexing, supporting a more efficient production flow. Practical system integration and material matching Supplied as part of the ISO turning insert family, the component works within a system comprising the indexable insert, a suitable external holder or boring bar, locating base/clamp set and replacement screws. The chipbreaker CM is chosen to complement the T5115 grade and is appropriate where stable chip formation is required; selecting the correct chipbreaker and grade for the workpiece material and process stability improves process reliability. Clear specification of holder geometry and cutting parameters allows rapid integration into existing turning operations. Contact Metav Werkzeuge today to specify the TPMT110304‑CM T5115 for current projects or request assistance from our technical advisors to determine the best chipbreaker and holder combination for the application Technical data Article number: 6864554 SKU: 6864554-Tungaloy Manufacturer SKU: TUN6864554 Model series: ISO turning indexable inserts ISO designation: TPMT110304-CM Facts Corner radius: 0.4 mm Thickness: 3.18 mm Size: 11 mm Relief angle: 11° Insert angle: 60° Special features CVD‑coated cemented carbide (T5115) Chipbreaker: CM Triangular plate form Cylindrical hole with one‑side countersink (40°–60°) Designed for external and internal turning Universal grade optimised for cast iron Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The TPMT110304‑CM T5115 is a universal grade optimised for machining cast iron; the T5115 CVD coating and cemented carbide substrate provide wear resistance and edge stability suited to this material. Which chipbreaker is fitted and what does it do? This insert features the CM chipbreaker, which promotes controlled chip formation and reliable evacuation during turning, reducing the risk of chip entanglement and improving surface quality. How is the insert mounted in a holder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°); secure clamping requires a compatible holder matched by form, clearance angle, tolerance class, fastening method, size and thickness. Can the insert be used for internal turning as well as external turning? Yes, the triangular geometry and standardised ISO dimensions allow the insert to be used for both external and internal turning when paired with suitable holders and cutting parameters. What benefits does the T5115 grade offer compared with uncoated grades? The CVD‑coated T5115 grade increases thermal and abrasive wear resistance compared with uncoated carbide, providing longer tool life and more consistent edge condition, which supports stable process windows and improved productivity. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 110304 T6215 PS Wendeplatten - Tungaloy
Take advantage of the combination of a CVD‑coated carbide grade specially formulated for stainless steels, a compact 0.4 mm corner radius for consistent edge strength, and ISO compatibility for quick insert changes — order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TPMT110304-PS T6215 ISO triangular turning insert by Tungaloy — CVD‑coated carbide for stainless steel TPMT110304-PS T6215 is an ISO‑standard triangular turning insert designed for external and internal turning of stainless steels under stable to lightly interrupted cutting conditions. CVD‑coated carbide for stainless steel ISO triangular insert, 11 mm size 11° clearance angle for reliable chip control With cylindrical hole and countersink 40°–60° Consistent performance when turning stainless steel The TPMT110304-PS T6215 insert delivers reliable results when machining stainless steel thanks to its CVD‑coated carbide substrate and the PS chipbreaker geometry. The coating reduces abrasive wear and improves heat resistance, which extends edge life in continuous cuts. With a 0.4 mm corner radius, the insert balances edge strength and finish, reducing the risk of premature chipping while maintaining acceptable surface quality. The result is a predictable cutting process that supports productivity in medium‑duty turning tasks. Fast indexability and simple holder compatibility Because the insert conforms to ISO form and dimensions, index changes and replacement are straightforward, lowering downtime in production environments. The triangular shape and 11 mm size make it suitable for a wide range of standard holders; compatibility is governed by form, clearance angle, tolerance class, fastening, size and thickness. The 3.18 mm plate thickness and the cylindrical hole with a one‑sided countersink (40°–60°) ensure secure clamping and repeatable seating, which simplifies setup and maintains stable cutting over multiple indices. Less downtime and lower tooling costs through extended life The combination of the T6215 grade and CVD coating promotes improved wear resistance and consistent edge retention on stainless materials, which reduces the frequency of index changes and tool consumption. Optimised chip formation from the PS chipbreaker assists chip evacuation and helps avoid built‑up edge in less stable feeds. Choosing this insert supports a more economical machining cycle by stretching tool life and increasing the effective cutting time per index, while maintaining process stability and surface consistency. For application advice or to secure stock, contact Metav Werkzeuge — our consultants will recommend the correct holder and cutting data for Tungaloy inserts and support implementation in production. Technical Data Article number: 6877036-Tungaloy Manufacturer article number: 6877036 Manufacturer SKU: TUN6877036 Model series: ISO‑Drehwendeschneidplatten Item designation: TPMT110304-PS T6215 Specifications Corner radius: 0.4 mm Relief (clearance) angle: 11° Included angle: 60° Thickness: 3.18 mm Plate size: 11 mm Hole countersink angle: 40°–60° Features / Applications Material: carbide Coating: CVD Grade: T6215 Chipbreaker: PS Shape: triangular Hole style: cylindrical hole with one‑sided countersink Application: turning (external and internal) Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The insert is optimised for machining stainless steel; the T6215 grade and CVD coating provide wear resistance for those alloys under stable to lightly interrupted conditions. How does the PS chipbreaker affect machining? The PS chipbreaker promotes controlled chip formation and evacuation on stainless steels, which helps maintain a consistent cutting edge and reduces the risk of built‑up edge. Will this insert fit my existing ISO holder? Compatibility depends on holder form, clearance angle, tolerance class, fastening type, size and thickness; the ISO conformity of the insert simplifies matching to standard triangular holders. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius offers a compromise between robust edge strength and the ability to achieve a good surface finish, reducing chatter risk while maintaining acceptable part quality. Is the insert supplied with screws or fixings? The insert is specified as an ISO turning plate; mounting typically requires the appropriate outer holder, support pad and clamp set. Confirm the required hardware based on the chosen holder and clamping system. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com