VBGT 110301 NS9530 Wendeplatten - Tungaloy
Combining the sharp-edge finishing of the NS9530 cermet grade, the precise 0.1 mm corner radius and ISO-compliant geometry delivers consistently fine surface quality and low cutting forces for continuous turning operations; order directly via Metav Werkzeuge or consult our specialists for application advice. VBGT 110301 NS9530 VBGT110301FN-JP — Turning insert by Tungaloy The VBGT110301FN-JP NS9530 is an ISO-standard rhombic turning insert engineered for finishing operations on steel components. Uncoated cermet NS9530 for fine finishing Sharp edge reduces cutting forces and improves finish ISO rhombic insert, 11 mm size, 3.18 mm thickness Cylindrical hole with 40°–60° countersink for secure clamping Precision finishing with low cutting forces The NS9530 grade is an uncoated cermet specifically developed as a finishing grade for steel, offering a sharp cutting edge and low cutting forces. This composition produces a finely burnished surface and reduces the tendency to form built-up edge during continuous cuts. For users seeking improved component appearance and reduced secondary processing, the combination of a fine-grain cermet substrate and a small 0.1 mm corner radius supports consistent finishes on turned parts. The lower cutting resistance also contributes to steadier machining conditions and can reduce tool-induced vibration. Predictable clamping and interchangeability for production lines The insert’s ISO conformity and defined geometry make it straightforward to fit into standard toolholders. The rhombic form, 11 mm size and 3.18 mm thickness ensure repeatable seating and alignment, while the cylindrical hole with a one-sided countersink (40°–60°) allows secure fastening with compatible screws and underplates. Specified values such as a 5° clearance angle and 35° approach angle support predictable engagement with the workpiece. These mechanical consistencies reduce set-up time and promote process stability across serial production. Application guidance and machining advantages Designed for external and internal turning, this insert performs best in continuous cutting cycles and with small depths of cut, where its finishing qualities are most effective. The JP chipbreaker is tailored for ordered chip formation during finishing, improving chip control without compromising surface quality. Although it is an uncoated grade, the cermet substrate maintains a sharp edge for extended periods under the right cutting conditions, making it suitable where high surface integrity is the main priority. Select feed and speed settings aligned with finishing operations to exploit the insert’s strengths while minimising rework. Operational efficiency and recommended system setup The insert integrates into the established ISO turning system: an ISO insert, a matching external holder or boring bar, and the necessary underplate or clamping set with replacement screws. Correct selection of holder form, tolerance class and fixing hardware is essential to fully leverage the insert’s benefits. Using the specified VBGT110301FN-JP geometry with the proper clamping parts reduces micro-movement at the cutting edge and enhances repeatable part quality. For manufacturers aiming to streamline finishing steps, the insert delivers a balance of surface quality and predictable life that supports efficient throughput. For precise finishing with Tungaloy cermet technology, contact Metav Werkzeuge for availability and application advice: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6967200 Manufacturer SKU: TUN6967200 Model series: ISO turning inserts SKU: 6967200-Tungaloy Manufacturer: Tungaloy Facts Corner radius: 0.1 mm Clearance angle: 5° Approach angle: 35° Thickness: 3.18 mm Size: 11 mm Countersink range: 40°–60° Special features Shape: rhombic Grade: NS9530 Substrate: carbide (cermet, uncoated) Chipbreaker: JP Hole: cylindrical hole with one-sided countersink Application: turning (external and internal) ISO designation: VBGT110301FN-JP FAQ What workpiece materials is this insert intended for? The VBGT110301FN-JP NS9530 is formulated as a finishing grade for steel, providing low cutting forces and a high surface finish for turned components. Is the insert coated and what is the cutting material? This article is an uncoated cermet insert; the cermet substrate offers a sharp cutting edge suited to finishing applications. Which chipbreaker does the insert use and what is its benefit? The JP chipbreaker is integrated for improved chip control during finishing, producing short, manageable chips without compromising surface quality. How is compatibility with toolholders ensured? Compatibility depends on the insert’s rhombic ISO geometry, the 5° clearance angle, and the 3.18 mm thickness; holders matching these dimensions and the VBGT form will secure proper seating. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6967200 and the SKU is 6967200-Tungaloy; reference these when enquiring about availability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110301 NS9530 Wendeplatten - Tungaloy
VBGT110301 NS9530 ISO-Drehwendeschneidplatte zum Drehen – Tungaloy Die VBGT110301 NS9530 ist eine ISO-genormte, rhombische Wendeschneidplatte aus Hartmetall für präzise Schlichtbearbeitung beim Drehen. ISO-genormte rhombische Ausführung 11 mm Schlichtsorte NS9530 für feine Oberflächen Unbeschichtetes Cermet mit scharfer Schneidkante 0,1 mm Eckenradius für feine Konturen Mit Loch und zylindrischer Senkung 40°–60° Höchste Oberflächengüte dank Cermet-Qualität Das unbeschichtete Cermet NS9530 kombiniert eine scharfe Schneidkante mit geringen Schnittkräften, wodurch besonders bei kontinuierlichem Schnitt und kleinen Zustellungen hervorragende Oberflächen entstehen. Für Fertigungen, die Wiederholgenauigkeit und reduzierte Nacharbeit verlangen, sorgt die schlichte Plattensorte für konstante Ergebnisse und geringere Schleifaufwände. Sicherer Einsatz im ISO-System reduziert Stillstand Weil die Platte ISO-genormt ist, wird die Kompatibilität über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke definiert. Durch die klare Systembeschreibung lässt sich schnell der passende Außenhalter oder die Bohrstange auswählen; Unterlagen, Klemmsatz und Ersatzschrauben erleichtern die Einbindung in vorhandene Werkzeugaufnahmen und reduzieren Rüstzeiten. Effizienzsteigerung bei Schlichtoperationen in Stahl Anwender in der Serienfertigung profitieren von der Kombination aus stabiler Spanbildung und geringer Schnittkraft. Die VBGT110301 NS9530 wurde speziell als Schlichtsorte für Stahl ausgelegt und ermöglicht dadurch kürzere Taktzeiten bei gleichbleibender Oberflächenqualität, was die Wirtschaftlichkeit in der Produktion messbar verbessert. Einfache Montage und präzise Geometrie für sichere Prozesse Mit einem Eckenradius von 0,1 mm, einem Freiwinkel von 5° und einer Plattendicke von 3,18 mm bietet die Platte eine präzise Geometrie für feine Passungen und Konturen. Die Befestigung über das zylindrische Loch mit einseitiger Senkung (40°–60°) garantiert eine formschlüssige Fixierung und stabile Klemmeigenschaften selbst bei feinen Einstellparametern. Für Schlichtaufgaben in Stahl empfiehlt sich die VBGT110301 NS9530 von Tungaloy – kontaktieren Sie Metav Werkzeuge für individuelle Beratung und schnelle Lieferfähigkeit per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Bezeichnung: VBGT110301FR-J10 NS9530 Artikelnummer: 6998054 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6998054 Fakten Eckenradius: 0,1 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Plattenform: Rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Schneidstoff: Unbeschichtetes Cermet (NS9530) Spanbrecher: J10 Material: Hartmetall Einsatz: Schlichtsorte für Stahl Anwendung: Drehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Welche Vorteile bietet die NS9530-Sorte bei Schlichtbearbeitung? Die NS9530-Sorte zeichnet sich durch eine scharfe Schneidkante und niedrige Schnittkräfte aus; die VBGT110301 NS9530 von Tungaloy liefert dadurch hohe Oberflächengüte und reduziert Nachbearbeitung. Ist die Platte mit gängigen ISO-Außenhaltern kompatibel? Ja, die VBGT110301 NS9530 ist ISO-genormt; Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Für welche Schnittbedingungen ist der Spanbrecher J10 geeignet? Der Spanbrecher J10 ist auf kontinuierlichen Schnitt und feine Zustellungen abgestimmt und unterstützt stabile Spanbildung sowie gleichmäßige Oberfläche bei Schlichtaufgaben. Welche Montageeigenschaften bietet das Loch und die Senkung? Das zylindrische Loch mit einseitiger Senkung (40°–60°) ermöglicht formschlüssige Befestigung und sichert die Platte gegen Lageveränderung bei standardisierten Schraubverbindungen. Welche Abmessungen sind für Planungen wichtig? Wesentliche Maße sind Plattengröße 11 mm, Plattendicke 3,18 mm, Eckenradius 0,1 mm und Freiwinkel 5°, die bei Holderauswahl und Einstellparametern berücksichtigt werden sollten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110301 SH7025 J10 Wendeplatten - Tungaloy
Take advantage of the combination of tough, edge‑stable SH7025 coating, a precise 0.1 mm corner radius, and ISO compatibility for a reliable turning process; order the insert directly via Metav Werkzeuge or consult our tooling specialists for application-specific advice. VBGT 110301 SH7025 ISO turning insert for turning — Tungaloy VBGT110301FR-J10 SH7025 is an ISO‑standard indexable insert for external and internal turning, engineered for stable cutting performance with a rhombic geometry and a robust coated carbide grade. ISO rhombic insert VBGT 110301 Coated carbide grade SH7025 0.1 mm corner radius for fine finish Cylindrical hole with single-sided countersink Consistent edge life for variable engagement The coated carbide grade SH7025 is formulated for toughness and edge stability, making this insert suitable where cutting conditions change or where smaller tooling is required. The combination of a robust coating and carbide substrate reduces the risk of premature flank wear and chipping, which translates into longer tool life and fewer indexings. For practical use, select the chipbreaker and grade to match the workpiece material and the machining stability; the right pairing delivers improved surface quality and repeatable results. Precision fit reduces set‑up time and improves repeatability Designed to the ISO model series, the insert’s compatibility with holders is governed by form, clearance angle, tolerance class, fastening, size and thickness. The insert features a 5° free angle and a 35° included angle with an insert thickness of 3.18 mm, dimensions that support accurate seating in standard holders and boring bars. The presence of a cylindrical hole with a single‑sided countersink (40°–60°) ensures reliable clamping and minimal movement under cutting forces. Using a matched external holder, shim/clamp set and correct screws completes the system for consistent, repeatable machining. Practical guidance for turning operations and benefits The rhombic geometry with a 0.1 mm corner radius offers a compromise between cutting edge strength and surface finish, making the insert well suited to finishing and light roughing operations. The J10 chipbreaker provides controlled chip formation when matched to the machining parameters and workpiece material. In practice, this means fewer interruptions for chip control, reduced rework and better overall productivity. For complex or changing machining scenarios, this insert’s combination of geometry and SH7025 grade contributes to process reliability and predictable performance. Contact Metav Werkzeuge for tailored recommendations on Tungaloy SH7025 inserts or to discuss availability—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6967573 Manufacturer SKU: TUN6967573 Brand: Tungaloy Label: VBGT110301FR-J10 SH7025 SKU: 6967573-Tungaloy Facts Corner radius: 0.1 mm Included angle: 35° Free clearance angle: 5° Thickness: 3.18 mm Size: 11 mm Hole style: cylindrical hole + single-sided countersink (40°–60°) Plate form: rhombic Special features Material: carbide Coating/grade: SH7025 Chipbreaker: J10 Model series: ISO turning indexable inserts Typical application: turning (external and internal) System components: insert, external holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The insert with SH7025 grade is designed for broad applicability; material‑specific performance depends on selecting the appropriate chipbreaker and machining parameters for the workpiece. How does the 0.1 mm corner radius affect surface finish? A 0.1 mm radius balances edge strength and finish quality, enabling finer surface results in finishing passes while maintaining acceptable edge life. Which holders are compatible with this insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; use an ISO‑compatible external holder or boring bar sized for the VBGT geometry. Is the insert supplied with mounting screws or clamping sets? The system typically comprises the insert plus a matching holder, shim/clamp set and replacement screws; confirm scope of delivery when ordering. What does the hole style mean for clamping reliability? The cylindrical hole with a single‑sided countersink (40°–60°) ensures secure seating and stable clamping under cutting forces, improving repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VBGT 110301 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of SH7025 coated carbide for consistent edge stability, a precise 0.1 mm corner radius and full ISO compatibility to keep turning operations predictable; order the VBGT110301FN-JS SH7025 directly via Metav Werkzeuge or consult our specialists for tailored advice. VBGT110301FN-JS SH7025 — ISO turning insert, coated carbide, 0.1 mm radius (Tungaloy) A VBGT110301FN-JS SH7025 indexable turning insert designed for external and internal turning, delivering stable cutting edges and adaptable performance for variable engagement conditions. Coated carbide SH7025 for edge stability 0.1 mm corner radius for fine profiles ISO format for broad holder compatibility Cylindrical hole with single‑side countersink Reliable, repeatable cutting from a tough coated grade The coated carbide SH7025 is formulated for edge stability and resilience under fluctuating cutting conditions, which helps reduce unexpected tool changes and downtime. Coatings enhance resistance to abrasion and built‑up edge, so productive turning cycles are maintained even when engagement varies. For workshops and production lines seeking predictable tool life, this combination of substrate and coating translates into fewer interventions and steadier batch quality. Broad ISO compatibility reduces inventory complexity Supplied in the ISO form factor, the insert matches common holder geometries where shape, relief angle and thickness determine fit. The VBGT series designation aligns with standard clamping systems; the insert’s rhombic geometry, 11 mm size and 3.18 mm thickness enable use with many external holders and boring bars. The central cylindrical hole with a single‑side countersink (40°–60°) secures consistent seating and repeatable location, simplifying changeovers and lowering the number of spare parts required on the tool trolley. Precision profiles and adaptable chip control for finishing and roughing A 0.1 mm corner radius is suited to fine profiles and finishing passes where small radii produce accurate contours and improved surface quality. The 5° relief angle combined with a 35° principal angle supports versatile cutting geometries, allowing the insert to perform in both light finishing and more aggressive engagements when paired with the appropriate JS chipbreaker. Selecting a chipbreaker and grade that match the workpiece material and stability yields cleaner chip formation and reduces the risk of edge damage, helping to secure consistent dimensional results. Choose Tungaloy’s SH7025 grade for dependable turning performance and contact Metav Werkzeuge for expert application advice and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 7743509 SKU: 7743509-Tungaloy Manufacturer SKU: TUN7743509 ISO designation: VBGT110301FN-JS Label: VBGT110301FN-JS SH7025 Data Insert size: 11 mm Thickness: 3.18 mm Corner radius: 0.1 mm Relief angle: 5° Principal/lead angle: 35° Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Coating: SH7025 Material: carbide Chipbreaker: JS Insert form: rhombic Application: external and internal turning System: ISO turning indexable insert FAQ What materials is this insert suited for? The VBGT110301FN-JS SH7025 insert is a coated carbide grade intended for a wide range of turning applications; the JS chipbreaker and SH7025 coating support stable performance across varied materials when matched to the correct cut parameters. Is this insert compatible with common ISO holders? Yes, the VBGT110301FN-JS is produced to ISO dimensions, and compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness. What benefits does the SH7025 coating provide? SH7025 enhances flank and crater resistance for prolonged edge stability, particularly useful with smaller tools or where engagement conditions change frequently. How does the 0.1 mm corner radius affect the finish? A 0.1 mm radius delivers finer profile definition and improved surface finish on finishing passes while still allowing controlled, light roughing when conditions permit. What does the hole and countersink specification mean for clamping? The cylindrical hole with a single‑side countersink (40°–60°) ensures secure seating and repeatable positioning when clamped in compliant ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110301 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of SH7025 coated carbide, a precise 0.1 mm corner radius and ISO conformity for consistent turning performance; secure inventory and tool change simplicity via standardised geometry. Order the Tungaloy VBGT110301FN-JP insert directly through Metav Werkzeuge or consult the team on holder compatibility and selection. VBGT 110301 SH7025 — ISO turning indexable insert, rhombic 11 mm, 0.1 mm radius by Tungaloy A VBGT110301FN-JP SH7025 indexable insert designed for external and internal turning, offering a tough coated carbide grade for reliable edge stability in variable engagement conditions ISO‑compliant turning insert SH7025 Coated carbide for stable cutting edge Rhombic 11 mm form, 0.1 mm radius Cylindrical hole with 40°–60° countersink Consistent geometry and material deliver predictable production results The ISO series construction guarantees a repeatable work routine: defined seat geometry and standard tolerances reduce set‑up variation and simplify tool inventory. The coated carbide grade SH7025 is formulated for edge stability under changing engagement and smaller tool sizes, which helps avoid premature chipping. The tight 0.1 mm radius concentrates mechanical strength at the corner, improving corner life while maintaining cutting performance. These technical choices create a stable process window that supports higher first‑pass quality and reduces rework. Efficient chip control and extended tool life reduce unit costs The integrated chipbreaker JP promotes controlled chip flow in both steady and interrupted cuts, lowering the risk of entanglement and machine downtime. Combined with the insert’s surface treatment, this yields efficient cutting and longer tool life, which improves economics in serial turning operations. The result is fewer tool changes and more consistent cycle times, making the solution particularly effective where machining conditions vary or where smaller tooling geometries are required. Clear mounting parameters for secure fixation and repeatable seating Performance depends on correct holder matching: the rhombic form, plate size 11 mm and thickness 3.18 mm must align with the toolholder’s form, clamping system and tolerance class. The 5° relief and the cylindrical hole + countersink (40°–60°) ensure secure mechanical fixation and repeatable seating in ISO‑configured holders. Understanding these mounting parameters reduces setup time and eliminates ambiguity during insert replacement in mixed‑operation shops. Practical application guidance for turning operations Intended for turning, both external and internal turning, the tougher SH7025 grade copes well with variable depths of cut and feed rates typical of general workshop and production environments. The insert suits applications where a stable cutting edge is more important than ultra‑high speed finishing; select the appropriate chipbreaker and cutting parameters based on the workpiece material and machine–tool stability to achieve consistent results with minimal burr and good surface integrity. For application recommendations and availability of the Tungaloy VBGT110301FN-JP SH7025 insert, please contact Metav Werkzeuge for technical advice and stock information Technical Data Article number: 7743506 SKU: 7743506-Tungaloy Manufacturer SKU: TUN7743506 Designation: VBGT110301FN-JP SH7025 Material: cemented carbide Model series: ISO turning indexable inserts Core data Corner radius: 0.1 mm Plate size: 11 mm Plate thickness: 3.18 mm Relief angle: 5° Lead angle: 35° Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Coating: SH7025 Chipbreaker: JP Plate form: rhombic With hole Typical application: external and internal turning Compatibility determined by form, relief, tolerance, clamping, size and thickness FAQ What materials is this insert intended for? The VBGT110301FN-JP SH7025 is specified for turning applications; select the chipbreaker and grade according to the workpiece material and machining stability for best results. How does the SH7025 grade affect tool life? The SH7025 coating and substrate combination enhances edge stability and resistance to chipping, improving tool life under variable engagement compared with uncoated grades. Which holders are compatible with this insert? Compatibility depends on holder geometry, clamping and tolerance class; the insert’s rhombic form, size (11 mm) and thickness (3.18 mm) require ISO‑compatible seats and a secure fixation matching the cylindrical hole and countersink. What is the benefit of the JP chipbreaker? The chipbreaker JP promotes controlled chip formation in light and interrupted cuts, reducing the chance of recutting chips and improving surface quality. Is the insert suitable for small tool applications? Yes, the tougher, edge‑stable composition of the insert is particularly suited to smaller tools and situations with changing engagement conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110301 SH725 J10 Wendeplatten - Tungaloy
Take advantage of the combination of a tough SH725 cutting grade, reliable chip control and standard ISO compatibility for steady production results; order directly via Metav Werkzeuge or consult the team for application-specific advice. VBGT 110301 SH725 VBGT — ISO rhombic turning insert for precision turning by Tungaloy The VBGT110301FL-J10 SH725 is an ISO-format, rhombic turning insert designed for external and internal turning; its geometry and chipbreaker are aimed at stable cutting under varying engagement conditions. ISO rhombic insert, 11 mm size Coated cemented carbide grade SH725 0.1 mm corner radius for fine finishing 35° approach angle for controlled cutting Consistent cutting performance from a tough grade The SH725 coating is a tough, edge-stable grade developed for turning, especially where small tools or fluctuating engagement occur. This results in reliable edge life and fewer machining interruptions, which supports higher uptime and lower rework rates. The coated cemented carbide substrate helps maintain dimension and surface quality over longer tool cycles, translating into measurable process stability for series and single-part production alike. Precision geometry reduces setup and improves surface finish With an ISO rhombic form and an approach angle of 35°, the insert lowers cutting forces in many turning operations while maintaining effective chip flow. The 0.1 mm corner radius provides a balance between edge strength and a fine finish, making the insert suitable for finishing passes and detail work. Compatibility with holders is governed by form, relief angle, tolerance class, fixing method, size and thickness, so matching the insert to a correctly specified holder ensures repeatable clamping and quick tool changes. Controlled chips and flexible system assembly for varied applications The integrated J10 chipbreaker promotes predictable chip formation across a range of turning tasks, reducing the risk of entanglement and improving operator safety. The system approach — insert plus matching outer holder, shim or clamp set and replacement screws — simplifies spares management and inventory. Intended for turning operations, the design supports both internal and external cuts and is suitable where stable chip control and consistent cutting behaviour are required. For application guidance tailored to Tungaloy’s SH725 inserts and a quick check of holder compatibility, contact Metav Werkzeuge for expert advice and rapid supply via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6737043 Manufacturer SKU: TUN6737043 SKU: 6737043-Tungaloy Designation: VBGT110301FL-J10 SH725 Facts Size: 11 mm Thickness: 3.18 mm Corner radius: 0.1 mm Relief angle: 5° Approach angle: 35° Special features Coated cemented carbide grade SH725 Chipbreaker J10 ISO rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) With hole for secure mounting Intended application: turning (external and internal) FAQ What materials is this insert intended for? The VBGT110301FL-J10 SH725 insert from Tungaloy is designed as a general-purpose turning grade; SH725 is particularly suited to applications requiring a tough, edge-stable coated carbide for variable engagement conditions. How does the J10 chipbreaker affect machining? The integrated J10 chipbreaker on the insert promotes controlled chip formation, aiding evacuation and reducing the risk of chip interference during turning operations. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; the VBGT110301FL-J10 is an ISO-format insert intended for standard ISO external and internal turning holders. What finishing quality can be expected with the 0.1 mm corner radius? A 0.1 mm corner radius offers a compromise between edge strength and surface quality, enabling finer finishing passes while maintaining sufficient edge robustness for stable turning. Is the product available with replacement screws and shims? The insert is supplied as part of a system comprising the insert, suitable outer holder or boring bar, shims/clamp set and replacement screws — check availability for the specific holder combination required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110301 SH725 Wendeplatten - Tungaloy
VBGT 110301 SH725 Drehwendeschneidplatte für Drehen von Tungaloy Die VBGT 110301 SH725 ist eine ISO-genormte Drehwendeschneidplatte, entwickelt für präzises Außen- und Innendrehen unter wechselnden Eingriffsbedingungen ISO-genormte Drehwendeschneidplatte Zähe Sorte SH725 für wechselnde Eingriffsbedingungen Rhombische Plattenform, Freiwinkel 5° Mit zylindrischem Loch und einseitiger Senkung 40°–60° Eckenradius 0,1 mm für feine Konturen Langlebigkeit durch Materialwahl und Beschichtung Wendeschneidplatten aus Hartmetall bieten eine solide Basis für anspruchsvolle Zerspanungsaufgaben. Die SH725 Sorte ist beschichtet und zeichnet sich durch zähe, schneidkantenstabile Eigenschaften aus, was insbesondere bei kleineren Werkzeugen oder wechselnden Eingriffsbedingungen die Standzeit erhöht. Vorteil ist die reduzierte Nacharbeit durch gleichbleibende Schnittqualität und weniger Werkzeugwechsel während der Fertigung. Vielseitiger Einsatz beim Außen- und Innendrehen Applikationen wie Außen- und Innendrehen profitieren von der Kombination aus Form und Spanformer. Der JP Spanbrecher sorgt für kontrollierte Spanbildung und eignet sich besonders bei variierenden Spanvolumen. Ergebnis ist eine verbesserte Oberflächengüte und stabilere Prozessverhältnisse, was die Produktivität bei Kleinserien und Einzelteilfertigung steigert. Passgenauigkeit und Systemkompatibilität Systemkomponenten bestimmen die Funktionalität: ISO-Norm, Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke müssen mit dem Halter übereinstimmen. Eine passende Auswahl des Außenhalters oder der Bohrstange sowie Unterlage/Klemmsatz und Ersatzschrauben garantiert präzise Fixierung und Wiederholgenauigkeit. Bereits die richtige Plattendicke und Plattengröße reduzieren Vibrationen und verbessern die Einspanndynamik. Wirtschaftlichkeit für Werkstatt und Fertigung Betriebswirtschaftlich punkten solche Wendeschneidplatten durch geringeren Rüstaufwand und längere Standzeiten. Eckenradius 0,1 mm ermöglicht filigrane Konturen ohne mehrfaches Nachschlichten. Für Lohnfertiger und Serienhersteller bedeutet das weniger Stillstand und planbare Produktionskosten. Die Kombination aus Stabilität und einfacher Sortenauswahl führt zu verlässlicher Prozesskalkulation. Empfehlung: Für produktive Drehprozesse die SH725-Sorte einsetzen und bei Bedarf technische Beratung bei Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfragen Produktmerkmale Artikelnummer: 6922851 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Ausführung: VBGT110301FN-JP Fakten Eckenradius: 0,1 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 mm Herstellerartikelnummer: 6922851 SKU Hersteller: TUN6922851 Besonderheiten Material: Hartmetall Sorte/Beschichtung: SH725 (zähe, schneidkantenstabil) Spanbrecher: JP (optimierte Spanformer, stabile Spanbildung) Plattenform: Rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen Modellserie: ISO-Drehwendeschneidplatten Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Welche Werkstoffe eignen sich für diese Wendeschneidplatte? Die Wendeschneidplatte VBGT110301FN-JP SH725 von Tungaloy (SKU 6922851-Tungaloy) ist ausgelegt für eine breite Werkstoffpalette; die zähe SH725-Sorte wurde speziell für wechselnde Eingriffsbedingungen entwickelt und überzeugt bei Stahl- und legierten Werkstoffen sowie Mischbearbeitungen. Wie wähle ich den richtigen Halter für die Platte aus? Beim Einsatz der VBGT110301FN-JP SH725 ist die Kompatibilität mit dem Halter entscheidend: Form, Freiwinkel 5°, Toleranzklasse, Befestigung, Größe 11 mm und Plattendicke 3,18 mm müssen passen, damit die Tungaloy-Platte (Artikelnummer 6922851) stabil und wiederholgenau arbeitet. Für welche Bearbeitungsarten ist der JP-Spanbrecher geeignet? Der JP-Spanbrecher auf der VBGT110301FN-JP SH725 von Tungaloy unterstützt stabile Spanbildung und ist besonders sinnvoll bei wechselnden Spanvolumen und beim Schruppen bis zum leichtem Schlichten, wodurch die Prozesssicherheit im Betrieb steigt. Welche Vorteile bietet die SH725-Sorte konkret? Die SH725-Sorte der VBGT110301FN-JP SH725 (Tungaloy, SKU 6922851-Tungaloy) liefert eine gute Standzeit und schneidkantenstabilität, was zu weniger Werkzeugwechseln und konstanter Oberflächenqualität führt, insbesondere bei kleinen Werkzeugen oder variablen Eingriffsbedingungen. Ist die Platte für Innen- und Außendrehen geeignet? Ja, die VBGT110301FN-JP SH725 von Tungaloy ist für Außen- und Innendrehen ausgelegt; die rhombische Form und der Freiwinkel 5° ermöglichen vielseitigen Einsatz bei unterschiedlichen Schnittbedingungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110301 TH10 Wendeplatten - Tungaloy
VBGT 110301 TH10 ISO-Drehwendeschneidplatte zum Drehen – Tungaloy Die VBGT 110301 TH10 ist eine ISO-genormte Drehwendeschneidplatte für präzise Außen- und Innendreharbeiten an Nichteisenwerkstoffen und anspruchsvollen Oberflächenanforderungen. Unbeschichtetes Hartmetall TH10 für niedrige Schnittkräfte Rhombische Form, 11 mm Plattengröße, 0,1 mm Eckradius Freiwinkel 5° für universelle Schnittbedingungen Mit zylindrischem Loch und einseitiger Senkung Spanbrecher J10 für saubere Spanbildung Präzise Schneidkante für saubere Oberflächen Die VBGT110301FL-J10 TH10 nutzt unbeschichtetes Hartmetall, das eine scharfe Schnittkante liefert und dadurch niedrige Schnittkräfte ermöglicht. Das führt zu saubereren Oberflächen und reduziert die Belastung von Halter und Maschine. Für Anwender bedeutet das weniger Nacharbeit und längere Standzeiten bei Bearbeitung von Nichteisenwerkstoffen. Kompakter Aufbau, einfache Kompatibilität Die rhombische Form mit 11 mm Plattengröße und der Eckradius von 0,1 mm macht die Platte besonders vielseitig. Durch den Freiwinkel 5° und die ISO-konforme Geometrie ist die Platte mit gängigen Außenhaltern und Bohrstangen kompatibel. Die Konstruktion mit zylindrischem Loch und einseitiger Senkung vereinfacht die präzise Befestigung und minimiert Spiel im Werkzeughalter. Zielgruppe und typische Einsatzfälle Entwickelt für Zerspaner, Einrichter und Fertigungsbetriebe, eignet sich die Platte besonders für Außen- und Innendrehen an Messing, Aluminium und anderen Nichteisenwerkstoffen. Die Sorte TH10 ist eine vielseitige Universalsorte, die in Anwendungen mit Anforderung an saubere Spanabfuhr und niedrige Schnittkräfte überzeugt. Spanverhalten und wirtschaftlicher Nutzen Der integrierte Spanbrecher J10 fördert eine stabile Spanbildung und erleichtert die Spanabfuhr bei längeren Schnitten. In der Praxis führt das zu konstanteren Bearbeitungsergebnissen und reduziert Rüst- sowie Nacharbeitszeiten, was die Wirtschaftlichkeit in der Serienfertigung verbessert. Für produktive und wirtschaftliche Zerspanung empfehlen wir die VBGT 110301 TH10 von Tungaloy; bei Fragen steht Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 gern zur Verfügung. Produkteigenschaften Artikelnummer: 6811497 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBGT110301FL-J10 TH10 Hersteller-SKU: TUN6811497 Fakten Plattengröße: 11 mm Plattendicke: 3,18 mm Eckenradius: 0,1 mm Freiwinkel: 5° Winkel: 35° Besonderheiten Material: Hartmetall Sorte: TH10 Schneidstofftyp: unbeschichtetes Hartmetall Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: J10 (für saubere Spanbildung) Anwendung: Drehen FAQ Welche Werkstoffe lassen sich mit der Platte bearbeiten? Die VBGT110301FL-J10 TH10 von Tungaloy ist besonders geeignet für Nichteisenwerkstoffe wie Messing und Aluminium sowie für allgemeine Anwendungen, bei denen eine scharfe unbeschichtete Schneidkante Vorteile bringt. Wie beeinflusst die Sorte TH10 die Bearbeitung? Die Sorte TH10 bietet niedrige Schnittkräfte und eine saubere Schnittkante; das Ergebnis ist eine verbesserte Oberflächenqualität und reduzierte Nacharbeit im Vergleich zu ungeeigneten Sorten. Welche Rolle spielt der Spanbrecher J10? Der Spanbrecher J10 sorgt für stabile Spanbildung und erleichtert die Spanabfuhr, was besonders bei längeren Schnitten und Serienfertigung konstante Ergebnisse unterstützt. Ist die Platte mit Standard-ISO-Haltern kompatibel? Ja, die Platte entspricht ISO-Geometrien; Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Welche Plattendicke und Größe hat die Platte? Die Plattendicke beträgt 3,18 mm, die Plattengröße 11 mm und der Eckradius 0,1 mm, Angaben aus der Produktdatenblatt-Ausstattung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110301 TH10 Wendeplatten - Tungaloy
Benefit from a sharp, uncoated carbide grade for low cutting forces, ISO compatibility for straightforward tool selection and a secure cylindrical hole with one-sided countersink for reliable clamping; order the VBGT110301FR-J10 TH10 directly via Metav Werkzeuge or consult the technical advisers for optimal application matching. VBGT 110301 TH10 — ISO turning insert for precision external and internal turning (Tungaloy) VBGT110301FR-J10 TH10 is a rhombic ISO turning insert designed for external and internal turning tasks, offering a sharp uncoated cutting edge for low cutting forces and clean surface finish. ISO rhombic insert, size 11 and 3.18 mm thick Uncoated carbide grade TH10 for clean surface finish Cylindrical hole with one-sided countersink 40°–60° 0.1 mm corner radius and 5° relief angle Precision and cutting performance for low-force turning The uncoated cemented carbide grade TH10 is engineered to deliver a sharp cutting edge that reduces cutting forces and promotes a clean surface on non-ferrous components. Combined with the chipbreaker J10, this geometry supports reliable chip control in many light to medium-duty turning operations. As an ISO-specified insert, the component integrates into established toolholder systems; compatibility depends on insert form, relief angle, tolerance class, fastening arrangement, size and thickness, ensuring predictable results when the correct holder and clamping set are used. Secure clamping and geometry that stabilise results The rhombic insert shape with an effective 0.1 mm corner radius and a 5° relief angle provides a balance of edge strength and accessibility for finishing passes. The cylindrical hole with a one-sided countersink (40°–60°) ensures positive location and repeatable clamping when paired with the appropriate screw and shim set, while the 3.18 mm plate thickness contributes to stability under cut. These geometric choices translate into repeatable tool life and consistent surface quality, with reduced risk of edge chipping during feed and direction changes. Application range and system considerations for efficient setup Designed primarily for external and internal turning, this insert is particularly suited to non-ferrous materials and situations where an uncoated cutting edge supports low cutting forces and a tidy finish. Selection of the correct chipformer and grade should follow the workpiece material, machining strategy and machine stability. The typical system comprises the ISO insert, a matching external holder or boring bar, an underlay or clamping set and replacement screws. For complex setups or material mixes, consult the technical advisers to match holder geometry and tolerance class to the insert for optimal process security. Choose Tungaloy TH10 inserts for sharp, low-force performance and contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for technical selection and supply Technical data Article number: 6811500 SKU: 6811500-Tungaloy Manufacturer SKU: TUN6811500 Label: VBGT110301FR-J10 TH10 Model series: ISO turning inserts Core specifications Size: 11 Thickness: 3.18 mm Corner radius: 0.1 mm Relief angle: 5° Included angle: 35° Countersink angle: 40°–60° Versions / Special features Material: cemented carbide Coating: uncoated Grade: TH10 Chipbreaker: J10 Plate form: rhombic Hole: cylindrical hole with one-sided countersink Application: turning (external and internal) System components: insert, holder or boring bar, underlay/clamping set, replacement screws FAQ What materials is this insert best suited for? The VBGT110301FR-J10 TH10 grade is formulated for non-ferrous materials and for operations where an uncoated cutting edge supports low cutting forces and a clean surface finish. How is compatibility with toolholders ensured? Compatibility is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; the VBGT-series follows ISO dimensions for straightforward holder matching. What chip control can be expected with this geometry? The combination of the J10 chipbreaker and the sharp TH10 edge gives good chip formation and evacuation for light to medium turning tasks, improving surface consistency. Can the insert be used for both external and internal turning? Yes; the rhombic shape and geometry make the insert suitable for both external and internal turning when the correct holder or boring bar is selected. What does the cylindrical hole with one-sided countersink provide? The cylindrical hole with a one-sided countersink (40°–60°) provides positive location and repeatable clamping when used with the corresponding screw and shim, enhancing stability and repeatability in the tool system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110302 AH725 Wendeplatten - Tungaloy
Benefit from the combination of a universal AH725 cutting grade, ISO VBGT form compatibility and a fine 0.2 mm corner radius for reliable, repeatable turning results; order the insert directly via Metav Werkzeuge or consult our specialists for tailored advice. VBGT 110302 AH725 — ISO turning insert VBGT110302N-JS for turning applications by Tungaloy The VBGT110302N-JS AH725 is an ISO‑standard rhombic turning insert engineered for external and internal turning, combining a robust PVD‑coated carbide grade with a 0.2 mm corner radius and a cylindrical mounting hole with countersink. PVD-coated AH725 carbide Universal for steel and rostfreier Stahl ISO VBGT 110302 rhombic form 0.2 mm corner radius, 3.18 mm thickness Cylindrical hole with 40°–60° countersink Consistent cutting performance with a universal grade The AH725 grade is a PVD‑coated carbide designed for stable, low‑risk machining across a broad range of steels and rostfreier Stahl. Its formulation supports predictable tool life and controlled chip formation even when workpiece materials vary during production. For organisations aiming to increase uptime, this grade reduces the need for frequent tool changes and simplifies grade selection for mixed batches. The PVD layer improves wear resistance and contributes to surface finish stability without sacrificing toughness. Geometry engineered for precision and repeatability ISO VBGT 110302 geometry provides a rhombic profile with a 35° main cutting angle and a 5° clearance, producing consistent engagement and dimensional control in turning operations. The 0.2 mm corner radius balances edge strength with the ability to produce fine radii on components, while the 3.18 mm plate thickness ensures rigidity in smaller‑format tooling. Compatibility with holders depends on form, clearance angle, tolerance class, fastening and size — this standardisation allows straightforward replacement in ISO holders and repeatable mounting accuracy across machines. Secure clamping and system‑level reliability The insert features a cylindrical hole with single‑side countersink (40°–60°) for secure screw clamping, reducing micro‑movement under load and supporting steady cutting forces. Typical system composition comprises the insert, a matching external holder or boring bar, a shim/clamp set and spare screws. Choosing the correct JS chipbreaker and matching the grade to the workpiece stability will further improve process security, minimise insert chipping and make tool changes faster and safer in a production environment. Targeted applications and workshop benefits Designed primarily for turning, this insert is suited to both external and internal operations where flexibility and process confidence are priorities. It is particularly effective for smaller tools and applications requiring high process reliability rather than extreme metal removal rates. Machine shops, subcontract manufacturers and production lines will value the combination of universal application, stable cutting behaviour and ISO compatibility, which together reduce tooling complexity and support consistent part quality. For dependable turning performance with Tungaloy’s AH725 grade and expert guidance on holder compatibility, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss availability and application support Technical data Article number: 6857015 Manufacturer SKU: TUN6857015 Model series: ISO turning insert series Material: Carbide Grade: AH725 (PVD‑coated) Core specifications Corner radius: 0.2 mm Plate thickness: 3.18 mm Plate size: 11 mm Main cutting angle: 35° Clearance angle: 5° Design & special features Rhombic plate shape (VBGT) Cylindrical hole with single‑side countersink (40°–60°) Chipbreaker: JS Compatible with ISO holders for external and internal turning System components: insert, external holder or boring bar, shim/clamp set, spare screws FAQ What materials is this insert suitable for? The AH725 grade insert is designed for machining steel and rostfreier Stahl and performs well where workpiece materials vary, offering stable chip control and wear resistance. How does the VBGT 110302 geometry affect cutting? The rhombic VBGT 110302 geometry with a 35° approach angle and 5° clearance gives a balance of strength and accessibility for internal and external turning, promoting dimensional consistency. Which chipbreaker should be chosen for roughing or finishing? The JS chipbreaker fitted to this insert is a versatile option; for heavy roughing a more open chip control might be preferred, while the JS configuration supports a mix of finishing and moderate material removal. How is the insert secured in the holder? Clamping is achieved via the cylindrical hole with a single‑side countersink (40°–60°), which ensures reliable screw fastening and reduces micro‑movement during cutting. Is this insert compatible with standard ISO holders? Yes, compatibility is based on the plate form, clearance angle, tolerance class, fastening and plate dimensions; the VBGT form and ISO designation enable easy replacement in suitably specified holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VBGT 110302 AT9530 Wendeplatten - Tungaloy
Benefit from precise finishing, consistent wear resistance and ISO compatibility for dependable turning operations; order directly via Metav Werkzeuge or consult our specialists for tailored application advice. VBGT 110302 AT9530 — VBGT110302N-JS indexable insert for Turning by Tungaloy VBGT110302N-JS AT9530 is an ISO‑standard indexable turning insert designed for finishing and light turning of steel, optimised for high surface quality and uniform wear. ISO rhombic insert, 11 mm size Coated cermet grade AT9530 for fine finish JS chipbreaker designed for light finishing cuts Cylindrical hole with single countersink (40°–60°) Exceptional surface finish from a coated cermet grade The coated cermet substrate AT9530 combines a hard, wear‑resistant matrix with an engineered coating to prioritise surface finish and even tool wear in finishing passes. Cermet differs from conventional cemented carbide by delivering superior edge stability and a fine cutting edge, which reduces built‑up edge and supports predictable dimensional results. For applications where part appearance and tight tolerances matter, this grade offers a clear advantage in achieving a consistent, high‑quality finish with fewer rework cycles. Secure seating and ISO compatibility for reliable set‑ups Designed as part of the ISO turning insert family, the insert’s rhombic geometry, 11 mm nominal size and 3.18 mm thickness ensure straightforward matching to many standard external holders and boring bars. The 5° relief angle and 35° principal angle give a defined cutting attitude for light finishing, while the 0.2 mm radius supports fine edge formation. The insert is supplied with a cylindrical hole plus a one‑sided countersink (40°–60°) to ensure proper clamp engagement and repeatable seating. When assembling the system, include a compatible holder, the correct shim or clamp set and the specified screws to maintain repeatability and process security. Efficiency through controlled wear and predictable results Selecting a grade focused on finishing means fewer corrective operations and more stable production throughput. The AT9530 composition promotes uniform wear, which extends the period of consistent cutting behaviour and reduces the variability between parts. In routine production this translates into less in‑process inspection, fewer scrapped components and a more consistent surface quality across batches. The economic benefit is directly measurable through reduced downtime and lower downstream finishing costs while maintaining the necessary part accuracy. Match chipbreaker and cutting strategy to the task The JS chipbreaker is optimised for light turning and finishing strategies on steel; it forms short, controlled chips at moderate feeds and supports a calm cutting zone that enhances surface integrity. For roughing operations, choose an insert with a more robust chipbreaker; for the finest finishes, maintain stable tool overhang and minimise vibration to exploit the full potential of the coated cermet edge. When in doubt, evaluate a short trial cut with the chosen holder and clamping arrangement to confirm the best feed and depth settings for the component geometry. Contact Metav Werkzeuge for application support or to request the Tungaloy VBGT110302N-JS AT9530 insert for precision turning; consultants are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6921226-Tungaloy Manufacturer SKU: TUN6921226 Manufacturer article number: 6921226 Model series: ISO turning indexable inserts Material: cemented carbide Facts Insert designation: VBGT110302N-JS Size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 5° Principal angle: 35° Hole: with hole Hole style: cylindrical hole + single countersink (40°–60°) Special features Coating/grade: AT9530 Substrate: coated cermet Chipbreaker: JS Shape: rhombic Application: turning System requirements: ISO insert, compatible external holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert intended for? The VBGT110302N-JS AT9530 insert is designed primarily for the finishing and light turning of steel, with the AT9530 grade focused on optimising surface finish and uniform wear. How does the JS chipbreaker influence cutting? The JS chipbreaker on this insert promotes short, controllable chips during finishing cuts; when used with appropriate feeds it helps maintain surface integrity and reduces thermal and mechanical disturbance. Which holder type is required for the insert? As an ISO‑standard insert, the VBGT110302N-JS requires a compatible external holder or boring bar that matches the rhombic shape, 11 mm seat and the 3.18 mm plate thickness; secure clamping with the correct shim and screws is essential for repeatability. Is the insert suitable for heavy roughing? This grade and chipbreaker combination is optimised for finishing and light cuts; for heavy roughing, select a different chipbreaker and a more robust grade suited to higher metal removal rates. How does the AT9530 grade affect tool life? AT9530’s coated cermet composition promotes even wear and a stable cutting edge during finishing, which supports predictable performance and can reduce the need for frequent index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110302 J740 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant Tungaloy grade J740, precise ISO‑standard geometry and a secure clamping provision for consistent turning performance; order directly via Metav Werkzeuge or consult the team for application-specific advice. VBGT 110302 J740 – VBGT110302FL-J10 ISO rhombic turning insert by Tungaloy, 35° cutting angle A VBGT110302FL-J10 J740 rhombic indexable insert for external and internal turning, designed to balance wear resistance and edge stability in a wide range of turning tasks. ISO‑standard geometry for holder compatibility Tungaloy J740 grade for high wear resistance Rhombic 11 mm size with 35° cutting angle Cylindrical hole with countersink 40°–60° for secure clamping Consistent cutting performance for routine and demanding turning The rhombic indexable insert has been engineered to provide stable cutting behaviour across a variety of steels and common engineering materials. The combination of the Tungaloy J740 carbide grade and the J10 chipbreaker yields a compromise between abrasion resistance and toughness, which helps maintain a stable cutting edge and predictable tool life. As an ISO‑standard insert, its geometry and tolerance classes are matched to common holders, reducing setup uncertainty and supporting efficient process planning. Clear clamping and geometry that reduce set‑up time With an 11 mm plate size, 3.18 mm plate thickness and a cylindrical hole plus one‑sided countersink (40°–60°), the insert ensures secure seating and reproducible positioning in compatible clamping systems. The 35° cutting angle and 5° relief are specified to provide a reliable cutting orientation for both external and internal turning operations. These dimensional standards support quick tool changes and reduce the risk of misalignment, contributing to shorter machine idle times and steadier part quality. Material choice and edge integrity for longer productive runs Made from cemented carbide, the grade focuses on balanced performance: the J740 composition increases resistance to flank and crater wear while retaining sufficient toughness to resist chipping under moderate interrupted cuts. The small 0.2 mm corner radius is suitable for general turning and finishing passes where edge definition and surface finish must be preserved. Selecting the appropriate chipbreaker and feed parameters further extends usable life and reduces tool wastage in batch production. Application scope and machining recommendations Designed primarily for turning, the insert supports both roughing and finishing when matched with an appropriate holder and cutting data. The ISO designation simplifies matching to holders by form, free angle, tolerance class, fastening and size. For best results, pair the insert with a suitable external holder or boring bar, establish stable workholding and choose feeds that suit the chosen chipbreaker; this approach improves swarf control and surface quality. If process conditions are uncertain, the technical team at Metav Werkzeuge can advise on optimal holder and parameter selection. Contact Metav Werkzeuge for tailored selection guidance and to order the Tungaloy VBGT110302FL-J10 J740 insert directly, or request further machining data via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6811503 Manufacturer SKU: TUN6811503 Label / Description: VBGT110302FL-J10 J740 Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade: J740 Chipbreaker: J10 Plate form: Rhombic Hole style: Cylindrical hole + one-sided countersink (40°–60°) Numbers / Core technical data Size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Cutting angle / Included angle: 35° Relief angle: 5° ISO code: 110302 Designs / Special features ISO‑standard geometry for holder compatibility Tungaloy carbide grade J740 for wear resistance and edge stability Cylindrical central hole with countersink for reliable clamping J10 chipformer for controlled swarf and stable cutting Suitable for external and internal turning applications FAQ What materials can be machined with this insert? The VBGT110302FL-J10 J740 insert is designed for general turning tasks and the J740 grade provides a balance of wear resistance and toughness suitable for a broad range of steels and common engineering materials. Which holder types are compatible with this ISO insert? Compatibility is determined by the insert form, free angle, tolerance class, fastening method, size and thickness; the ISO designation makes it compatible with standard rhombic turning holders and matched boring bars. How does the J10 chipbreaker affect machining? The J10 chipbreaker stabilises chip formation, aiding swarf evacuation and supporting consistent surface finish when combined with appropriate feeds and speeds for the chosen material. Is the insert suitable for finishing operations? Yes; with its 0.2 mm corner radius and the balanced properties of the J740 grade, the insert can be used for finishing passes when cutting data are adjusted to achieve the required surface quality. What documentation is provided with the insert? Technical data such as ISO code, dimensions and grade are supplied; for application sheets or recommended cutting data, consult Metav Werkzeuge or request specific machining tables. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110302 J740 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑compliant geometry, a J740 Tungaloy grade for reliable wear resistance and a fine 0.2 mm corner radius to achieve consistent surface quality and process stability in turning operations — order directly via Metav Werkzeuge or consult our specialists for selection advice. VBGT 110302 J740 ISO turning insert for turning — Tungaloy A VBGT110302FR-J10 J740 indexable insert designed for ISO‑standard external and internal turning with a rhombic geometry and integrated chipbreaker. ISO‑compliant rhombic geometry 11 mm J740 grade for high wear resistance 0.2 mm corner radius for fine finishes Cylindrical hole with 40°–60° countersink Consistent precision and holder compatibility for reliable production The insert is engineered as an ISO‑compliant indexable insert, which simplifies tool selection and ensures repeatable positioning in standard holders. The rhombic form and the specified dimensions mean compatibility with holders is determined by shape, relief angle, tolerance class, fastening method, size and thickness. This predictability reduces setup time and supports a steady production flow. Where holders differ, selecting the matching shim, clamp set and replacement screw maintains clamping integrity and repeatable machining results. J740 grade: longer tool life and stable cutting edges The Tungaloy J740 carbide grade extends tool life through a balanced combination of wear resistance and toughness, supporting longer uninterrupted cycles on both external and internal turning. In practice, this means fewer indexings and reduced downtime for insert changes. The included J10 chipbreaker is matched to the grade and promotes controlled chip formation, which helps preserve the cutting edge and supports consistent part quality across small to medium batch sizes. Geometry and hole design that improve clamping and chip flow A 0.2 mm corner radius gives a good compromise between edge strength and the ability to produce fine surface finishes; it is particularly suited to finishing passes where dimensional control is important. The insert’s cylindrical hole with a single‑side countersink (40°–60°) secures the plate evenly in the pocket and simplifies seating in a variety of clamping systems. The specified relief angle of 5° and the stated 35° lead/approach angle contribute to predictable cutting forces and help maintain stability during interrupted cuts. Materials and applications: what this insert machines well Made from cemented carbide, the insert is intended for conventional turning operations on a wide range of materials when combined with the right chipbreaker and cutting parameters. The ISO‑standard series supports both external and internal turning tasks; choosing the proper chipbreaker and insert grade tailors performance to the workpiece material and machining stability. For users seeking higher process security and consistent surface finish, this combination offers a dependable solution for general turning applications. Contact Metav Werkzeuge for tailored advice on selecting Tungaloy J740 inserts for specific turning tasks; technical guidance is available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6811506 SKU: 6811506-Tungaloy Manufacturer SKU: TUN6811506 Facts Size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Relief (free) angle: 5° Angle: 35° Countersink angle: 40°–60° Special features Shape: rhombic Hole: cylindrical hole with single‑side countersink Chipbreaker: J10 Grade: J740 (Tungaloy carbide) Material: cemented carbide Intended use: turning System: ISO turning insert compatible with external holders or boring bars; requires shim/clamp set and replacement screws FAQ What materials is the VBGT110302FR-J10 J740 suited for? The VBGT110302FR-J10 J740 insert, made of Tungaloy cemented carbide, is designed for a broad range of turning tasks; material-specific performance depends on the selected chipbreaker and cutting parameters. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm radius provides improved edge strength while allowing fine surface finishes for finishing passes when the VBGT110302FR-J10 J740 insert is used with appropriate feeds and speeds. Is this insert compatible with standard ISO holders? Yes — the insert follows ISO dimensions; compatibility is ensured by matching the holder by form, relief angle, tolerance class, fastening method, size and thickness. What advantage does the J740 grade offer in production? The Tungaloy J740 grade balances wear resistance and toughness, resulting in extended tool life and stable cutting-edge behaviour during sustained turning operations. What is the function of the cylindrical hole and countersink? The cylindrical hole with a single‑side countersink (40°–60°) secures the insert reliably in the pocket, improving clamp seating and contributing to consistent clamping force and repeatable machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110302 J9530 Wendeplatten - Tungaloy
High-performance ISO turning insert combining the wear-resistant Tungaloy J9530 grade with a fine 0.2 mm corner radius and secure countersunk‑hole clamping for stable, repeatable turning results; order via Metav Werkzeuge or request application advice from the consultants. VBGT110302R-J10 J9530 — VBGT 110302 turning insert (Tungaloy) with 0.2 mm radius The VBGT110302R-J10 J9530 is an ISO‑standard rhombic turning insert engineered for external and internal turning, delivering consistent edge stability and controlled chip formation. ISO‑standard rhombic insert VBGT shape Tungaloy grade J9530 for wear resistance 0.2 mm corner radius for fine finishing Countersunk hole for secure clamping Consistent cutting performance for productive turning The insert’s ISO conformity and the Tungaloy J9530 grade deliver a reliable balance of wear resistance and toughness, supporting stable cutting on a range of steels and alloyed materials. The specified 0.2 mm corner radius promotes improved surface finish while limiting cutting forces, which is advantageous in both finishing passes and light roughing. In practical terms, this means fewer insert changes and steadier cycle times, contributing directly to higher process efficiency and lower overall machining costs. Geometry and clamping that reduce vibration and repeatability issues With a rhombic form and a countersunk cylindrical hole (40°–60°) the insert ensures accurate seating and repeatable positioning in compatible holders. The 5° free rake and the 35° approach angle combine to favour controlled chip flow and predictable tool engagement, which reduces the risk of chatter. These design elements deliver tangible benefits: improved dimensional consistency and extended tool life under comparable cutting conditions. Carbide grade and application guidance for reliable results Made from high‑quality carbide, the insert’s grading targets turning operations where a compromise of edge stability and wear resistance is required. The J9530 composition is suited to a wide range of turning tasks; selecting the appropriate chip‑breaker (J10) together with a holder matched for form, clearance angle, tolerance class, size and thickness will ensure optimal performance. For customers less familiar with insert grades, the combination of carbide substrate and J9530 coating characteristics supports robust performance across typical steel machining tasks. System compatibility and straightforward integration into production The insert belongs to the ISO turning inserts family and integrates into standard systems consisting of an insert, a compatible external holder or boring bar, clamping shim/kits and replacement screws. The 11 mm size and 3.18 mm thickness are industry‑standard dimensions that simplify sourcing of matching clamping components. Specifying the correct holder geometry and tightening torque ensures the insert’s advantages — edge stability, chip control and repeatable seating — translate directly into measurable process improvements. Contact Metav Werkzeuge for tailored machining advice on the Tungaloy VBGT110302R-J10 J9530 insert, including stock availability and recommended holder combinations; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6723937 SKU (manufacturer): TUN6723937 SKU (Metav): 6723937-Tungaloy Key figures Insert designation: VBGT110302R-J10 Carbide grade: J9530 Corner radius: 0.2 mm Size: 11 mm Thickness: 3.18 mm Features and compatibility Insert form: rhombic Free rake angle: 5° Approach/wedge angle: 35° Hole style: cylindrical hole + one‑sided countersink (40°–60°) Chip‑breaker: J10 Material: carbide Model series: ISO turning inserts Application: turning (external and internal) FAQ What materials is this insert suitable for? The VBGT110302R-J10 J9530 insert is designed as a versatile carbide grade for common turning applications, offering strong wear resistance and edge stability for a broad range of steels and alloyed materials. How does the 0.2 mm corner radius affect the finish? A 0.2 mm corner radius on the VBGT110302R-J10 J9530 provides a fine surface finish while moderating cutting forces, making it well suited to finishing cuts and light semi‑finishing. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; selecting a holder made for VBGT‑type inserts with the correct clamp and shim will ensure secure seating and repeatable results. Is the J10 chip‑breaker suitable for heavy cuts? The J10 chip‑breaker is optimised for the intended range of turning operations; for heavy roughing, a different chip‑breaker or geometry may be preferable depending on workpiece material and stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VBGT 110302 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing, low cutting forces and reliable ISO compatibility — the sharp-edged cermet grade offers improved surface quality and predictable holder integration; order the VBGT110302FL-J10 NS9530 directly via Metav Werkzeuge or ask our consultants if needed. VBGT 110302 NS9530 — ISO turning insert VBGT110302FL-J10 (Tungaloy) The VBGT110302FL-J10 NS9530 is an ISO‑standard rhombic turning insert designed for fine finishing of steel with a sharp cutting edge and consistent chip control. ISO‑standard rhombic insert for turning Uncoated cermet NS9530 for fine finishing 0.2 mm corner radius for precise profiles Compatible with holders requiring 5° clearance Improved surface quality with minimal cutting force The uncoated cermet NS9530 is engineered as a finishing grade, providing a sharp cutting edge and reduced cutting forces for continuous cuts and small depths of cut. This results in superior surface finish and reduced tool-induced stress on the workpiece, which is especially valuable in precision turning operations where consistent part quality matters. The combination of a fine edge geometry and the 0.2 mm corner radius ensures delicate profile definition while maintaining dimensional stability during the pass. Predictable integration with ISO tooling systems Belonging to the ISO turning insert series, compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness. This standardisation simplifies selection of a suitable holder or boring bar and supports modular system assembly — insert, clamping set and replacement screws — for quick changeover. The clear numeric specifications such as 5° clearance and 35° approach angle help ensure reliable seating and repeatable positioning in compatible toolholders, reducing setup time and variability in production. Controlled chip formation and repeatable finishing results The J10 chipbreaker works with the rhombic geometry and sharp cermet cutting edge to produce short, manageable chips even in continuous finishing cuts; this improves surface consistency and machine uptime. Key dimensional features — 0.2 mm corner radius, 3.18 mm thickness, size 11 and a cylindrical hole with one‑sided countersink (40°–60°) — contribute to precise clamping and alignment. The 35° approach angle supports stable cutting forces and reduces vibration, while the uncoated cermet substrate preserves edge sharpness for repeatable fine turning of steel components. For application advice on the Tungaloy VBGT110302FL-J10 NS9530 and guidance on selecting the correct holder or machining parameters, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998055 Manufacturer article number: 6998055 Manufacturer SKU: TUN6998055 Dealer SKU: 6998055-Tungaloy Label: VBGT110302FL-J10 NS9530 Numbers Corner radius: 0.2 mm Approach angle: 35° Clearance angle: 5° Thickness: 3.18 mm Size: 11 Design & Features Material: Hartmetall Cutting material: uncoated cermet NS9530 Chipbreaker: J10 Plate shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Series: ISO-Drehwendeschneidplatten Application: Turning FAQ What materials is this insert designed for? The VBGT110302FL-J10 NS9530 is a finishing grade optimised for steel; the uncoated cermet substrate delivers a sharp edge and consistent surface quality in continuous finishing cuts. How is compatibility with toolholders ensured? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO designation and measured values such as 5° clearance and 3.18 mm thickness facilitate correct holder selection. What advantages does the J10 chipbreaker provide? The J10 chipbreaker produces controlled, short chips during finishing operations, aiding surface consistency and reducing the risk of chip interference on turned parts. Which identifiers are useful when ordering? Use the article number 6998055, manufacturer SKU TUN6998055 or the dealer SKU 6998055-Tungaloy to ensure the correct VBGT110302FL-J10 NS9530 insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110302 NS9530 Wendeplatten - Tungaloy
VBGT 110302 NS9530 ISO-Drehwendeschneidplatte zum Drehen – Tungaloy Die VBGT110302 NS9530 ist eine ISO-genormte Drehwendeschneidplatte für präzise Schlichtbearbeitung beim Drehen von Stahl VBGT110302FN-JS von Tungaloy Unbeschichtetes Cermet für hohe Oberflächengüte Schlichtsorte NS9530: niedrige Schnittkräfte Rhombische Form 11 mm, Eckenradius 0,2 Zylindrisches Loch mit einseitiger Senkung 40°–60° Effizienz und Präzision in der Schlichtbearbeitung Die Schneidstoffsorte NS9530 wurde speziell für Schlichtanwendungen entwickelt und liefert eine herausragende Oberflächengüte bei niedrigen Schnittkräften. Anwender profitieren von konstanten Ergebnissen bei kontinuierlichem Schnitt und kleinen Zustellungen, was die Nachbearbeitung minimiert und Maschinenauslastung sowie Prozesssicherheit verbessert. Die Kombination aus scharfer Schneidkante und optimierter Spanbildung macht die Platte zur wirtschaftlichen Wahl für Feinbearbeitung an Stahl. Kompakte Geometrie und einfache Werkzeugintegration Mit rhombischer Plattenform in 11 mm Größe, einer Plattendicke von 3,18 mm und einem Eckenradius von 0,2 mm ist die Platte für präzise Außen- und Innendrehprozesse ausgelegt. Der Freiwinkel 5° und der Winkel von 35° sorgen für stabile Kontaktverhältnisse zur Werkstückoberfläche. Das zylindrische Loch mit einseitiger Senkung (40°–60°) erleichtert die sichere Befestigung und sorgt für wiederholgenaue Positionierung im ISO-Halter. Materialaufbau und Vorteile des Schneidstoffs Der Schneidstoff ist ein unbeschichtetes Cermet, auf einem Hartmetall-Träger ausgeführt, was die Vorteile beider Werkstoffklassen vereint: die Wärmebeständigkeit und Verschleißfestigkeit von Hartmetall mit der feinkörnigen, scharfen Schneidkante des Cermet. Das Ergebnis ist geringerer Verschleiß bei ruhigen Schnittbedingungen und eine ausgezeichnete Wiederholgenauigkeit der Kantengeometrie, ideal für Serien mit hohem Anspruch an Maßhaltigkeit und Oberfläche. Zielgruppe und typische Einsatzfälle Die Platte richtet sich an Zerspanungsbetriebe, Lohnfertiger und Maschinenbauer, die hochwertige Schlichtoperationen an Stahl durchführen. Besonders geeignet ist sie für Anwender, die stabile Spanbildung, geringe Schnittkräfte und hervorragende Oberflächen ohne zusätzlichen Lapschritt benötigen. Die Kombination aus Sorte NS9530 und Spanformer JS ist auf ruhige, kontinuierliche Schnitte ausgelegt und eignet sich für feine Innen- und Außenbearbeitung. Empfehlung: Für hochpräzise Schlichtbearbeitung von Stahl die VBGT110302FN-JS NS9530 von Tungaloy wählen und bei technischen Fragen direkt kontaktieren: info@metav-werkzeuge.com / +49 2822 7131930 Leistungsmerkmale Artikelnummer: 6967234 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBGT110302FN-JS (VBGT) Fakten Eckenradius: 0,2 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 mm Radius: 0,2 mm Besonderheiten Material: Hartmetall Schneidstoff: unbeschichtetes Cermet Sorte: NS9530 – Schlichtsorte für Stahl Spanbrecher: JS – Spanformer für Schlichtbearbeitung Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Form: rhombisch Anwendung: Drehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz, Ersatzschrauben FAQ Welche Hauptvorteile bietet die VBGT110302FN-JS NS9530 bei Schlichtprozessen? Die VBGT110302FN-JS NS9530 von Tungaloy reduziert Schnittkräfte und verbessert die Oberflächengüte, was Nachbearbeitung minimiert und konstante Teilequalität gewährleistet. Für welche Werkstoffe ist diese Wendeschneidplatte geeignet? Die Sorte NS9530 ist speziell für Stahl ausgelegt; unbeschichtetes Cermet sorgt bei ruhigen Schnittbedingungen für besondere Feinheit der Oberfläche. Welchen Spanformer hat die Platte und wofür ist er geeignet? Die Platte ist mit dem Spanbrecher JS ausgestattet, der für Schlichtbearbeitung optimiert ist und eine stabile Spanbildung bei kleinen Zustellungen ermöglicht. Wie wird die Kompatibilität zum Halter sichergestellt? Die Kompatibilität ergibt sich aus Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; die VBGT110302FN-JS entspricht ISO-Normen und passt in entsprechend genormte Außenhalter. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110302 NS9530 Wendeplatten - Tungaloy
VBGT 110302 NS9530 für Drehen von Tungaloy Die VBGT 110302 NS9530 ist eine ISO-genormte Drehwendeschneidplatte für präzises Außen- und Innendrehen, entwickelt für Schlichtanwendungen in Stahl. VBGT 110302 NS9530 von Tungaloy Unbeschichtetes Cermet für präzises Schlichten Rhombische Form, Größe 11, Eckenradius 0,2 mm Mit zylindrischem Loch und Senkung 40°–60° Optimiert für Stahl: scharfe Kante, hohe Oberflächengüte Hohe Präzision bei der Schlichtbearbeitung Die VBGT 110302 NS9530 vereint das feine Schneidverhalten von unbeschichtetem Cermet mit einer scharfen Schneidkante, wodurch niedrige Schnittkräfte und eine hervorragende Oberflächengüte erzielt werden. Durch den kleinen Eckenradius 0,2 mm eignen sich die Platten insbesondere für kleine Zustellungen und kontinuierliche Schnitte. Anwender profitieren von gleichbleibender Bauteilqualität und reduzierter Nacharbeit bei anspruchsvollen Drehaufgaben. Robuster Aufbau und einfache Spanntechnik Die rhombische Plattenform mit Plattengröße 11 und Plattendicke 3,18 mm sorgt für stabile Einspannung und gute Wärmeableitung. Das zylindrische Loch mit einseitiger Senkung (40°–60°) ermöglicht eine sichere Befestigung im Halter. Kompatibilität ergibt sich über Form, Freiwinkel, Toleranzklasse sowie Größe und Dicke der Platte; dadurch ist die Integration in bestehende Haltersysteme einfach und praxisorientiert. Geeignetes Einsatzspektrum und Auswahlhinweise Die Sorte NS9530 ist explizit als Schlichtsorte für Stahl ausgelegt und liefert bei kontinuierlichem Schnitt ausgezeichnete Ergebnisse. Für Außen- und Innendrehen ist der Spanbrecher JP empfehlenswert, da er die Spanform für stabile Spanabfuhr optimiert. Bei variierenden Werkstoffen oder instabilen Aufnahmen sollte die Sorte und der Spanformer entsprechend angepasst werden, um Standzeit und Oberflächengüte zu maximieren. Für wen diese Wendeschneidplatte entwickelt wurde Die Platte richtet sich an Präzisionsdrehereien, Werkzeugbau und Serienfertiger, die bei Schlichtvorgängen höchste Ansprüche an Maßhaltigkeit und Oberfläche stellen. Anwender, die kurze Rüstzeiten und reproduzierbare Qualität suchen, profitieren von der Kombination aus ISO-Normgeometrie, robustem Aufbau und der spezialisierten NS9530-Sorte. Empfohlen wird der Einsatz der VBGT 110302 NS9530 von Tungaloy für präzise Schlichtaufgaben in Stahl; bei technischen Fragen erreichen Sie uns unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 6967202 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBGT110302FN-JP NS9530 Hersteller-SKU: TUN6967202 Daten ISO-Code: 110302 Plattengröße: 11 mm Plattendicke: 3,18 mm Eckenradius: 0,2 mm Freiwinkel: 5° Winkel: 35° Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet Sorte: NS9530 Spanbrecher: JP — spanformer für Schlichten, geeignet für kontinuierlichen Schnitt Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Einsatz: Drehen Anwendung: Schlichten Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Was unterscheidet die NS9530-Sorte von anderen Sorten? Die NS9530-Sorte ist ein unbeschichtetes Cermet, das für Schlichtanwendungen in Stahl optimiert wurde; die Platte VBGT 110302 NS9530 bietet eine scharfe Kante und niedrige Schnittkräfte für hohe Oberflächengüte. Ist die Platte mit gängigen ISO-Haltern kompatibel? Ja, die VBGT110302FN-JP NS9530 entspricht ISO-Standards; Kompatibilität wird über Form, Freiwinkel, Größe und Dicke sowie Befestigung und Toleranzklasse sichergestellt. Für welche Zustellungen eignet sich diese Wendeschneidplatte besonders? Die Platte ist ideal für kleine Zustellungen und kontinuierliche Schnitte; der Spanbrecher JP unterstützt stabile Spanführung beim Schlichten. Welche Rolle spielt das zylindrische Loch mit Senkung? Das zylindrische Loch mit einseitiger Senkung (40°–60°) ermöglicht eine sichere und präzise Befestigung in Haltern, reduziert Spiel und sorgt für konstante Schnitthaltigkeit; relevant für die Produkt-SKU TUN6967202. Kann die Platte auch für Innenbohrungen verwendet werden? Ja, die VBGT 110302 NS9530 eignet sich für Außen- und Innendrehen, sofern Halter und Einbaulage die geforderte Stabilität gewährleisten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110302 SH7025 Wendeplatten - Tungaloy
Take advantage of a combination of consistent edge stability, adaptable chip control and simple integration into standard ISO toolholders for dependable turning performance; order directly via Metav Werkzeuge or contact our advisers for application support. VBGT 110302 SH7025 – Rhombic ISO turning insert, 0.2 mm radius by Tungaloy The VBGT110302FL-J10 SH7025 is an ISO‑standard rhombic turning insert engineered for external and internal turning, offering robust edge stability and reliable chip control in varying engagement conditions. ISO rhombic insert, inscribed size 11 Coated carbide grade SH7025 for edge stability 0.2 mm corner radius for fine turning Cylindrical hole with single countersink 40°–60° Higher productivity through consistent cutting performance The rhombic ISO geometry and the SH7025 coated carbide grade combine to provide consistent edge stability and predictable wear behaviour, which directly supports higher process reliability. In practice, this means fewer unplanned indexings and a steadier surface finish when performing both external and internal turning operations. The moderate 0.2 mm radius reduces cutting forces on fine contours while maintaining sufficient strength at the cutting edge, enabling a balance between precision and tool life. Material suitability and what the coating delivers The coated carbide substrate is optimised for applications where toughness and stable cutting edges are required, particularly where engagement conditions fluctuate. The coating improves resistance to abrasive wear and helps maintain a sharp edge under interrupted cuts. For users unfamiliar with the term: a coated carbide insert carries a thin engineered layer that protects the carbide core and extends tool life, resulting in longer uninterrupted machining cycles and reduced tool consumption. Secure mounting and ISO compatibility for easy integration Designed as an ISO‑standard indexable insert, the component fits established external holders and boring bars when the form, clearance angle, tolerance class, fastening, size and thickness match. The insert’s cylindrical hole with a single countersink (40°–60°) ensures reproducible seating and clamping force, while the 3.18 mm thickness delivers the required support under normal turning loads. Selecting the correct holder tolerance and clamping plate is essential to exploit the insert’s full potential and maintain repeatable results. Practical guidance for application and chip control The included J10 chipbreaker is tailored for chip segmentation in common turning operations; when paired with reduced feed rates and correct nose radius selection, it improves chip evacuation and reduces the risk of re-cutting. For finishing passes where minimal material removal is required, the small 0.2 mm corner radius supports accurate profile replication. For heavier roughing, consider a larger radius or a different grade, but where a compromise between edge strength and fine detail is needed, this insert performs reliably. For application advice or to order Tungaloy SH7025 inserts for turning, contact Metav Werkzeuge — Metav Werkzeuge GmbH is ready to advise on holder compatibility and cutting data for specific materials Technical data Article number: 6967578 Manufacturer SKU: TUN6967578 SKU: 6967578-Tungaloy Label: VBGT110302FL-J10 SH7025 Numbers / Core technical data ISO code: 110302 Inscribed size: 11 Thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 5° Included angle: 35° Manufacturer article number: 6967578 Designs / Special features Rhombic plate form Coated carbide grade SH7025 Chipbreaker J10 Cylindrical hole with single countersink (40°–60°) ISO turning insert series Application: turning (external and internal) FAQ What material applications suit this insert best? This turning insert in SH7025 coating is intended for general turning where toughness and edge stability are needed; it is suitable for a broad range of steels and mixed-material batches under varying engagement conditions. How does the J10 chipbreaker affect machining? The J10 chipbreaker promotes segmentation for reliable chip control during turning; when combined with the specified feeds and speeds it reduces the chance of long, tangled chips. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; the insert fits standard ISO holders designed for rhombic 11‑size plates. Is the corner radius suitable for finishing operations? The 0.2 mm corner radius offers a good compromise for fine turning and finishing where accurate profile reproduction is required while retaining edge strength. What is the significance of the countersunk hole design? The cylindrical hole with a single countersink (40°–60°) ensures consistent seating and clamping, improving repeatability and reducing the risk of insert movement during machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110302 SH7025 Wendeplatten - Tungaloy
VBGT 110302 SH7025 Drehwendeschneidplatte für Drehen von Tungaloy Die VBGT110302FN-JS SH7025 ist eine ISO-genormte, rhombische Wendeschneidplatte für Außen- und Innendrehen mit beschichtetem Hartmetall für stabile Schneidkanten und konstante Prozesssicherheit ISO-genormt für breite Halterkompatibilität Beschichtetes Hartmetall SH7025 für lange Standzeit JS Spanbrecher für kontrollierte Spanformung Rhombische Form 11 mm mit Radius 0,2 mm Mit Loch und zylindrischer Senkung 40°–60° Überlegene Schneidkantenstabilität für produktive Zerspanung Die VBGT110302FN-JS SH7025 bietet durch den beschichteten Hartmetall-Schneidstoff SH7025 eine erhöhte Zähigkeit und Schneidkanten-Stabilität. Dadurch lässt sich die Standzeit bei wechselnden Eingriffsbedingungen verbessern, was die Stillstandszeiten reduziert. Die Folge sind höhere Fertigungsraten und weniger Werkzeugwechsel, ein klarer Vorteil für robuste Serienprozesse. Einfache Integration und sichere Befestigung für den Fertigungsalltag Bei der Montage entscheidet die ISO-Genormung über Form, Freiwinkel und Toleranzklasse, so dass die Platte in zahlreiche Halter passt. Der Freiwinkel 5° sorgt für ausgewogenes Schneidverhalten, die Befestigung über das Loch mit zylindrischer Senkung (40°–60°) gewährleistet sichere Halterung. Diese Kombination vereinfacht den Werkzeugwechsel und minimiert Einrichtzeiten. Zielgerichteter Einsatzbereich und Praxisnutzen Für Außen- und Innendrehen empfiehlt sich die Platte besonders bei Anwendungen mit wechselnden Schnittverhältnissen oder bei kleineren Werkzeugen. Der JS-Spanbrecher erzeugt kurze, kontrollierte Späne, wodurch Maschinenlauf und Spanabfuhr entlastet werden. Anwender profitieren von gleichbleibender Oberflächengüte und reduzierten Nachbearbeitungsaufwand. Technische Eigenschaften kurz erklärt und Praxishinweis Die rhombische Plattenform mit Eckenradius 0,2 mm erlaubt präzise Konturarbeiten und feine Radien. Die Plattendicke 3,18 mm und die Plattengröße 11 sorgen für ausreichende Stabilität, ohne unnötig Masse zuzuführen. Für Einsteiger: Ein Spanbrecher ist eine Geometrie zur Spanformung; er beeinflusst Spanlänge und Wärmeeintrag und sollte nach Werkstoff und Bearbeitungsart gewählt werden. Wir empfehlen die SH7025-beschichtete Wendeschneidplatte für zuverlässige Serienproduktion; Bestellungen und technische Anfragen über Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930 Leistungsmerkmale Artikelnummer: 7743510 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBGT110302FN-JS SKU: 7743510-Tungaloy Daten Eckenradius: 0,2 mm Plattendicke: 3,18 mm Plattengröße: 11 mm Winkel: 35° Freiwinkel: 5° Besonderheiten Material: Hartmetall Beschichtung: SH7025 (zäh, schneidkantenstabil) Spanbrecher: JS (kontrollierte Spanformung) Plattenform: rhombisch Loch: mit Loch — zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen Modellserie: ISO-Drehwendeschneidplatten Herstellerartikelnummer: 7743510 SKU Hersteller: TUN7743510 FAQ Welche Halter passen zur VBGT110302FN-JS SH7025? Kompatible Halter müssen ISO-genormte Aufnahmeform, passende Toleranzklasse und Befestigungsart haben; die VBGT110302FN-JS SH7025 passt in gängige rhombische Außen- und Innenhalter mit Lochbefestigung. Wie beeinflusst der JS Spanbrecher die Bearbeitung? Der JS-Spanbrecher formt kurze, gebrochene Späne, reduziert Spanverschlingung und verbessert die Spanabfuhr, wodurch die VBGT110302FN-JS SH7025 bei wechselnden Eingriffsbedingungen zuverlässiger arbeitet. Für welche Einsatzzwecke ist die SH7025-Sorte besonders geeignet? Die SH7025-Beschichtung bietet erhöhte Zähigkeit und Schneidkantenstabilität, ideal für Anwendungen mit variierenden Schnittdaten und für kleinere Werkzeugausführungen, wenn konstante Standzeiten gefordert werden. Welche Schneidbedingungen sind für optimale Standzeit empfehlenswert? Empfohlen sind abgestimmte Schnittgeschwindigkeiten und Vorschubwerte entsprechend Werkstoff und Werkzeugaufbau; die Kombination aus SH7025 und passendem Halter reduziert Vibrationen und verbessert die Werkzeugstandzeit. Wie wird die Wendeschneidplatte sicher befestigt? Die Platte wird über das zentrale Loch mit zylindrischer Senkung befestigt; die Senkung von 40°–60° sorgt für präzise Lage und sicheren Sitz im Halter. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110302 SH7025 Wendeplatten - Tungaloy
VBGT 110302 SH7025 – Drehwendeschneidplatte für Drehen von Tungaloy VBGT 110302 SH7025 bietet eine zähe, schneidkantenstabile Hartmetall-Beschichtung für variable Eingriffsbedingungen beim Außen- und Innendrehen Zähe, schneidkantenstabile Hartmetall-Sorte SH7025 ISO-genormte Form VBGT 110302 für breite Halterkompatibilität Zylindrisches Loch mit einseitiger Senkung für sichere Befestigung Eckenradius 0,2 mm für feine Kontur- und Schlichtbearbeitung Hohe Standzeit durch zähe Beschichtung und Werkstoffauswahl Die Wendeplatte besteht aus Hartmetall und ist mit der Sorte SH7025 beschichtet, die speziell für zähe, schneidkantenstabile Einsätze entwickelt wurde. Durch die Kombination aus robuster Schneidkante und optimiertem Beschichtungsaufbau reduziert sich der Werkzeugverschleiß bei wechselnden Eingriffsbedingungen. Das Ergebnis ist eine geringere Stillstandszeit in der Fertigung und eine höhere Wirtschaftlichkeit bei Serien- und Einzelfertigung. Präzise Kontur- und Oberflächenqualität dank kleiner Radien Mit einem Eckenradius 0,2 mm und einem Freiwinkel 5° eignet sich die Platte besonders für feine Schlicht- und Konturoperationen. Der geringe Radius ermöglicht enge Kanten und saubere Formkonturen, während der definierte Freiwinkel die Spanabfuhr sowie die Schnittkräfte positiv beeinflusst. Kurz: bessere Oberflächen und reproduzierbare Geometrien selbst bei anspruchsvollen Werkstücken. ISO-Konformität, Befestigung und einfache Integration Die Platte entspricht der ISO-Norm für VBGT-Formen und ist rhombisch ausgeführt; die Plattendicke beträgt 3,18 mm. Das zylindrische Loch mit einseitiger Senkung (40°–60°) sorgt für sichere und einfach montierbare Befestigung in gängigen Außenhaltern oder Bohrstangen. Anwender profitieren von schneller Einrüstzeit, klarer Halterkompatibilität und einfacher Lagerhaltung durch standardisierte Abmessungen. Empfehlen: Tungaloy VBGT 110302 SH7025 als wirtschaftliche Lösung für produktive Drehprozesse direkt bei Metav Werkzeuge anfragen — eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6967577 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten SKU Hersteller: TUN6967577 Daten Radius: 0,2 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 Besonderheiten Material: Hartmetall Sorte: SH7025 Spanbrecher: J10 Form: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Wendeplattenbezeichnung: VBGT110302FR-J10 SH7025 FAQ Was unterscheidet die SH7025-Sorte von anderen Beschichtungen? Die Sorte SH7025 kombiniert zähe Schneidkanten mit guter Standzeit; die VBGT 110302 SH7025 von Tungaloy ist deshalb besonders geeignet für variable Eingriffsbedingungen und kleine Werkzeuge, wo Schneidkantenstabilität entscheidend ist. Für welche Anwendungen ist die VBGT 110302 SH7025 ideal? Die Platte eignet sich für Außen- und Innendrehen sowie für Schlicht- und Konturoperationen; Anwender in Serienfertigung und Einzelteile-Produktion profitieren von der hohen Prozesssicherheit der VBGT 110302 SH7025. Wie beeinflusst der Eckenradius die Bearbeitung? Ein kleiner Eckenradius wie 0,2 mm erhöht die Detailgenauigkeit bei Konturen und reduziert gleichzeitig die Schnittkräfte in feinen Schlichtgängen; die Tungaloy Wendeplatte mit Eckenradius 0,2 mm ist dafür ausgelegt. Welche Halter sind kompatibel mit dieser Wendeplatte? Kompatibilität wird durch Form, Freiwinkel, Toleranz und Befestigungsart bestimmt; die ISO-konforme VBGT 110302 SH7025 passt in gängige VBGT-Außenhalter und Bohrstangen mit passender Unterlage und Schraube. Welche Kennnummern helfen bei der Bestellung? Für die Bestellung oder Anfrage nutzen Sie die Artikelnummer 6967577 oder die SKU TUN6967577; beide beziehen sich auf die VBGT110302FR-J10 SH7025 von Tungaloy. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110302 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH7025, reliable edge stability and precise rhombic 35° geometry for consistent turning results; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. VBGT110302FN-JP SH7025 (110302) VBGT — ISO turning insert for Drehen, Tungaloy A VBGT110302FN-JP SH7025 is an ISO-standard rhombic turning insert engineered for external and internal turning operations with a focus on edge stability in variable engagement conditions. Coated carbide grade SH7025 Rhombic geometry, 35° lead angle 0.2 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Reliable edge stability for fluctuating cutting conditions The SH7025 grade is a coated carbide developed for turning, providing a balance of toughness and cutting-edge stability that reduces the frequency of tool changes. In applications where engagement depth and cutting forces vary, the material formulation maintains a stable cutting edge, which helps to lower scrap rates and improves process uptime. The result is a more predictable production rhythm and an improved cost-per-part metric when used in appropriately matched toolholders. Precision geometry that supports consistent surface quality The rhombic geometry with a 35° lead angle and 0.2 mm corner radius delivers controlled chip formation and a predictable contact zone, supporting uniform surface finishes on workpieces. Coupled with the chipbreaker JP and a plate thickness of 3.18 mm, the insert enables reliable chip control in both light finishing cuts and more interrupted engagements. Being an ISO-standard insert, fitment depends on matching form, relief angle, tolerance class, fastening style, size and thickness to the selected holder — this ensures repeatable seating and concentricity for stable machining. Practical integration into the tooling system for economical production Designed as part of an ISO series, the insert integrates into a system consisting of a correct external holder or boring bar, a suitable backing/clamp set and replacement screws. For shorter tools or operations with changing engagement, the SH7025 formulation provides enhanced resistance to edge chipping, which contributes to longer effective tool life and fewer unplanned tool changes. Selection of the most suitable chipbreaker and grade should be aligned with the workpiece material and process stability to maximise productivity and minimise total machining costs. For reliable machining results with the Tungaloy SH7025 ISO insert, contact Metav Werkzeuge for tailored recommendations and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 7743507 SKU: 7743507-Tungaloy Manufacturer SKU: TUN7743507 Label: VBGT110302FN-JP SH7025 Manufacturer: Tungaloy Core measurements Corner radius: 0.2 mm Lead angle: 35° Free angle: 5° Thickness: 3.18 mm Size: 11 ISO designation: 110302 Design & special features Coating / grade: SH7025 Material: carbide Geometry: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: JP Application: external and internal turning Model series: ISO turning inserts (ISO-Drehwendeschneidplatten) FAQ What operations is this insert intended for? The VBGT110302FN-JP SH7025 ISO turning insert (SKU 7743507-Tungaloy) is intended for external and internal turning, offering stable performance where engagement conditions may change. Which cutting conditions benefit most from the SH7025 grade? SH7025 is a tough, edge-stable coated carbide grade suited to turning applications with variable engagement or shorter-tool setups; it helps maintain the cutting edge under fluctuating loads. How does the insert manage chip formation? Chip control is achieved through the JP chipbreaker combined with the rhombic geometry and the 35° lead angle, delivering predictable chips and consistent surface quality. How can compatibility with a holder be verified? Compatibility is determined by matching the insert form, relief (free) angle, tolerance class, fastening style, size and thickness to the holder specification to ensure secure seating and correct orientation. Which dimensions are most important when replacing inserts? Key dimensions to check are thickness (3.18 mm), size (11), corner radius (0.2 mm), hole style and the ISO designation (110302) to ensure correct interchangeability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110302 SH725 Wendeplatten - Tungaloy
VBGT 110302 SH725 – Drehwendeschneidplatte für Drehen von Tungaloy VBGT 110302 SH725 ist eine ISO-genormte, beschichtete Hartmetall-Wendeplatte für Außen- und Innendrehen mit stabilem Spanverhalten ISO-genormte rhombische Platte 11 mm beschichtetes Hartmetall für stabile Schneidkante Eckenradius 0,2 mm für feine Konturen mit zylindrischem Loch und einseitiger Senkung 40°–60° Freiwinkel 5° für wechselnde Eingriffsbedingungen Hohe Standzeit durch beschichtetes Hartmetall Die beschichtete Hartmetall-Sorte SH725 wurde entwickelt für zähe, schneidkantenstabile Leistung bei wechselnden Eingriffsbedingungen. Durch die Kombination aus Substrat und Schicht entsteht eine robuste Schneidkante, die die Werkzeugstandzeit erhöht und Stillstandszeiten reduziert. Anwender profitieren von konstanter Oberflächen-Qualität und weniger Nacharbeit bei Serien- wie Einzelteilen. Präzision und Schneidkontrolle bei variablen Bedingungen Mit einem Eckenradius von 0,2 mm erlaubt die Platte präzise Konturen und feinfühlige Eingriffe bei Drehoperationen. Die niedrige Eckenradius-Ausführung eignet sich besonders für Anwendungen mit kleinen Schnitttiefen und hoher Oberflächenanforderung, wo Maßhaltigkeit und Rauheitswerte entscheidend sind. Für Einsteiger: Eckenradius bezeichnet den abgerundeten Übergang an der Schneide, der Einfluss auf Schnittkraft und Oberflächenbild hat. Kompatibilität und Einsatzhinweise für Haltersysteme Die ISO-Genorm sorgt für einfache Integration in gängige Halter; entscheidend sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die rhombische Form mit 11 mm Kantenlänge ermöglicht vielseitige Einsatzwinkel, das Loch mit einseitiger Senkung gewährleistet sichere Befestigung. Bei Auswahl des Halters auf Freiwinkel 5° und passende Toleranzklasse achten, um Vibrationen zu vermeiden und Prozesssicherheit zu erhöhen. Spanformerwahl und Anwendungsempfehlung Der verbaute Spanbrecher J10 ist ausgelegt für allgemeine Drehaufgaben und bietet zuverlässige Spanteilung bei wechselnden Werkstoffen. Für schwer zerspanbare Werkstoffe kann eine andere Sorte oder ein anderer Spanbrecher vorteilhaft sein; bei Unsicherheit empfiehlt sich eine kurze Prozessfreigabe mit Probebearbeitung. Generell führt die richtige Kombination aus Sorte SH725, Spanbrecher und Schnittparametern zu höherer Produktivität und reproduzierbaren Ergebnissen. Empfehlung: Die VBGT 110302 SH725 von Tungaloy wählen für produktive, wiederholgenaue Drehbearbeitung; bei Fragen zur Auswahl oder zur Prozessoptimierung technische Beratung anfragen unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6737045 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBGT110302FL-J10 SH725 Typ: VBGT Fakten Eckenradius: 0,2 mm Plattendicke: 3,18 mm Plattengröße: 11 mm Winkel: 35° Freiwinkel: 5° Besonderheiten Material: Hartmetall Schneidstofftyp: beschichtetes Hartmetall Sorte: SH725 — zäh, schneidkantenstabil Spanbrecher: J10 — universeller Spanbrecher Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch ISO-genormt — Kompatibilität mit ISO-Haltersystemen FAQ Für welche Anwendungen eignet sich die VBGT110302FL-J10 SH725 am besten? Die VBGT110302FL-J10 SH725 von Tungaloy ist ausgelegt für Außen- und Innendrehen, besonders dort, wo zähe Sorten und stabile Schneidkanten gefragt sind; ideal für wechselnde Eingriffsbedingungen und anspruchsvolle Serienbearbeitung. Welche Werkstoffe lassen sich mit dieser Wendeplatte bearbeiten? Die beschichtete Hartmetall-Sorte SH725 bietet breite Werkstoffabdeckung; sie liefert gute Ergebnisse bei verschiedenen Stahlgüten und ist geeignet für allgemeine Drehaufgaben mit der VBGT-Platte (SKU TUN6737045). Wie finde ich den passenden Halter für diese Platte? Auf Form, Freiwinkel 5°, Toleranzklasse, Befestigungsart, Größe 11 mm und Plattendicke 3,18 mm achten; nur so ist die volle Kompatibilität zur ISO-genormten VBGT110302FL-J10 SH725 gewährleistet. Was bedeutet der Spanbrecher J10 in der Praxis? Der Spanbrecher J10 sorgt für zuverlässige Spanteilung bei vielseitigen Bearbeitungen; er ist ausgelegt als universelle Lösung für saubere Spanabfuhr und stabile Bearbeitungsbedingungen. Gibt es Empfehlungen für Schneidparameter oder Prüfzyklen? Für die SH725-Sorte mit Eckenradius 0,2 mm werden moderate Schnittkräfte und angepasste Vorschübe empfohlen; vor Serienstart eine Probebearbeitung durchführen, um Schnittwerte auf Maschine und Werkstoff abzustimmen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110302 SH725 Wendeplatten - Tungaloy
Benefit from economical operation, a stable cutting edge and precise chip control delivered by the SH725 grade and the J10 chipbreaker; these features support consistent productivity and reduced downtime. Order the VBGT110302FR-J10 SH725 directly via Metav Werkzeuge or ask our consultants if needed. VBGT110302FR-J10 SH725 — VBGT 110302 SH725 ISO turning insert for turning, 0.2 mm radius (Tungaloy) The VBGT110302FR-J10 SH725 is an ISO-format indexable turning insert intended for external and internal turning, offering a compact 0.2 mm corner radius and a chipbreaker optimised for variable engagement conditions. ISO-format rhombic insert, VBGT series Coated cemented carbide grade SH725 0.2 mm corner radius for fine finishing 5° clearance angle for reliable seating Consistent machining performance through a wear-resistant grade The insert’s SH725 designation identifies a coated cemented carbide grade formulated for toughness and cutting-edge stability. In practice this means a longer effective life under fluctuating engagement and intermittent cuts, helping to reduce tool-change frequency and maintain cycle-time targets. The combination of a robust substrate and modern coating provides a balance between flank wear resistance and edge strength, which translates into stable, repeatable component quality and fewer unscheduled interruptions. Precise fit and simple integration into ISO tooling systems The indexable plate follows the ISO-standard geometry and the VBGT family dimensions, so compatibility with the correct holder depends on form, clearance, tolerance class, fastening method, size and thickness. The rhombic shape and the 3.18 mm plate thickness, together with the cylindrical hole and one-sided countersink (40°–60°), ensure secure clamping in appropriate external holders or boring bars. The specified 5° clearance and 35° approach/wedge angle support predictable chip flow and reduce the risk of unexpected interference with toolholder geometry. Controlled chip formation and surface finish with the J10 breaker The dedicated chipbreaker J10 optimises chip control for a wide range of turning tasks; it promotes short, manageable chips in many semi-finish and finish operations. The small 0.2 mm corner radius favours fine surface finish and dimensional control on small-diameter work, while the breaker form and grade combination support productive cutting when tool engagement varies. Selecting the correct chipbreaker and grade for the workpiece material and machine stability will deliver the best compromise between surface quality and tool life. System approach and practical benefits for workshop use The component works as part of a system: an ISO indexable insert paired with a matching external holder or boring bar, a shim/clamping set and replacement screws. This system view simplifies inventory and replacement planning. Because the insert is intended for both external and internal turning, operators benefit from flexible tooling layouts and fewer distinct tool types. The stable edge and coating properties make this insert especially suitable for small tools or applications with changing engagement conditions, supporting process reliability across batches. For genuine Tungaloy performance and availability, contact Metav Werkzeuge to request technical details and to arrange supply of VBGT110302FR-J10 SH725 inserts Technical data Article number: 6737046-Tungaloy Manufacturer article number: 6737046 Manufacturer SKU: TUN6737046 Manufacturer: Tungaloy Material: Coated cemented carbide Numbers / Core technical data ISO code: 110302 Corner radius: 0.2 mm Clearance angle: 5° Wedge/approach angle: 35° Inscribed circle / size: 11 mm Plate thickness: 3.18 mm Designs / Special features Rhombic plate form (VBGT) Chipbreaker: J10 Grade: SH725 With hole; cylindrical hole + one-sided countersink (40°–60°) ISO turning indexable insert, suitable for external and internal turning Compatibility determined by form, clearance, tolerance, fastening, size and thickness System components: insert, suitable external holder or boring bar, shim/clamping set, spare screws FAQ What machining tasks suit this insert best? The VBGT110302FR-J10 SH725 is designed for external and internal turning operations where a small corner radius and stable cutting edge aid finishing and dimensional control. Which grade and substrate does the insert use? This insert is manufactured in the SH725 coated cemented carbide grade, chosen for toughness and edge stability in variable engagement conditions. How does the J10 chipbreaker influence performance? The J10 chipbreaker on the VBGT110302FR-J10 SH725 promotes controlled chip formation for many finishing and semi-finishing turning tasks, improving handling and surface consistency. Can this insert be used in standard ISO holders? Yes—the insert follows ISO geometry. Compatibility requires matching form, clearance angle, tolerance class, fastening, size (11 mm) and thickness (3.18 mm) to the chosen holder or boring bar. What features ensure secure clamping in the holder? The plate’s cylindrical hole with a single-sided countersink (40°–60°) and standard VBGT form ensure a reliable clamp seat when paired with the correct clamping set and screws. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110302 SH725 Wendeplatten - Tungaloy
Benefit from a combination of stable edge life, reproducible chip control and ISO compatibility to keep turning operations consistent and productive. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. VBGT 110302 SH725 — ISO turning insert (rhombic 11), Tungaloy VBGT110302FN-JP SH725 is an ISO-standard rhombic indexable insert for turning, engineered for stable cutting performance and reliable chip control in variable engagement conditions. ISO-standard rhombic insert Tough SH725 coated carbide grade 0.2 mm corner radius for fine finishing Cylindrical hole + single-sided countersink Consistent process performance for productive turning The SH725 grade is a coated carbide designed for toughness and edge stability, which delivers longer effective tool life under changing cut conditions. When used in turning operations, the combination of the JP chipbreaker and the rhombic geometry maintains predictable chip formation, reducing interruptions for chip clearing and part rework. The ISO compatibility of the insert simplifies holder selection and replacement, helping to maintain a steady production flow while lowering tooling-related downtime. Precision geometry that supports surface finish and repeatability The insert’s geometry — an effective cutting angle of 35°, a 5° relief angle and a 0.2 mm corner radius — is tuned for controlled cutting forces and improved surface quality on external and internal turning. The 3.18 mm plate thickness and rhombic 11 size ensure sufficient rigidity in typical external turning setups, while the cylindrical hole with single-sided countersink (40°–60°) enables secure clamping and repeatable positioning. These features result in reliable part-to-part consistency without complex fixture changes. Application flexibility and practical benefits for workshop use Designed for general turning tasks, this indexable insert suits operations where small tools or varying engagement depths are common. The coated, wear-resistant composition supports machining of a wide range of materials when matched with appropriate cutting parameters; selection of the JP chipbreaker and the SH725 grade is particularly effective where stable chip control and resistance to edge wear are priorities. For further guidance on feeds and speeds or holder compatibility, consult Metav Werkzeuge’s technical advisers — they can help align insert choice with the component material and machine capability. For assured, long-lasting performance with the SH725 grade, contact Metav Werkzeuge for tailored application advice and procurement support. Technical data Article number: 6932710 Manufacturer item no.: 6932710 SKU manufacturer: TUN6932710 SKU: 6932710-Tungaloy Facts Plate size: 11 mm Plate thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 5° Cutting angle: 35° Countersink: 40°–60° Special features Grade: SH725 (coated carbide) Chipbreaker: JP Shape: rhombic Hole: cylindrical hole + single-sided countersink Model series: ISO turning indexable inserts Typical application: turning Compatibility determined by form, relief, tolerance class, fastening, size and thickness FAQ What materials can be machined with this insert? The VBGT110302FN-JP SH725 insert is a coated carbide grade optimised for general turning; matching the SH725 grade and the JP chipbreaker to the workpiece material yields best results. How is chip control achieved with this insert? Chip control is provided by the JP chipbreaker geometry combined with the SH725 coated carbide; the design promotes consistent chip formation under varying engagement. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the insert follows ISO specifications for straightforward holder matching. What does the hole and countersink specification mean for clamping? The cylindrical hole with a single-sided countersink (40°–60°) allows secure clamping and precise seating on a compatible seat, improving repeatability during index changes. Is the corner radius suitable for finishing operations? The 0.2 mm corner radius offers a balance between strength and a fine surface finish, making it well suited to light finishing passes in standard turning cycles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com