VBGT 110302 SH725 Wendeplatten - Tungaloy
Benefit from the combination of coated cemented carbide SH725, a precise 0.2 mm corner radius and full ISO compatibility to ensure reliable performance in demanding turning operations; order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. VBGT 110302 SH725 VBGT110302FN-JS – ISO turning insert, 0.2 mm radius (Tungaloy) The VBGT110302FN-JS SH725 is an ISO-format rhombic insert for external and internal turning, engineered as a tough, edge-stable coated carbide grade for variable engagement and smaller-tool applications ISO-format rhombic insert, 11 mm SH725 coated carbide for tough conditions JS chipbreaker for controlled chip formation Cylindrical hole with 40°–60° countersink Consistent compatibility and predictable performance for production turning This ISO-format insert is manufactured to fit standard external-holder and boring-bar systems, so compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness. The rhombic geometry with a 35° lead angle and a 0.2 mm corner radius reduces vibration and helps maintain cutting-edge stability, which supports repeatable part quality in short-run and batch production. The standardised dimensions and tolerances permit straightforward replacement and help to reduce setup time in a typical turning cell. Robust cutting behaviour from the SH725 coated carbide and smart chip control The SH725 grade is a coated cemented carbide designed for edge stability and toughness, especially suited to smaller tools or varying engagement conditions. Combined with the JS chipbreaker, the insert promotes controlled chip formation and safe evacuation, improving surface finish and tool life in interrupted cuts or changing feed depths. In practice, a stable cutting edge and tailored chip control translate into fewer tool changes and more consistent cycle times for milling-adjacent turning operations. System-level practicality and guidance for selection The insert is part of an ISO insert system comprising the insert itself, a suitable outer holder or boring bar, shims/clamp sets and replacement screws. For best results, select chipbreaker and grade in relation to the workpiece material and machine-tool stability: the VBGT110302FN-JS performs well where a tough grade and reliable edge are required. The insert’s 3.18 mm thickness and 11 mm size provide a compact footprint for small-tool setups, while the cylindrical hole with one-sided countersink (40°–60°) secures positive clamping and repeatable seating in the toolholder. For tailored application advice on the Tungaloy VBGT110302FN-JS SH725 insert and assistance selecting matching holders or grades, contact Metav Werkzeuge by e-mail or phone for prompt, experienced consultation. Technical Data Article number: 6737147 Manufacturer SKU: TUN6737147 SKU: 6737147-Tungaloy Model series: ISO turning inserts Material: Cemented carbide Grade: SH725 Shape: rhombic Chipbreaker: JS Hole style: cylindrical hole + one-sided countersink (40°–60°) Facts Corner radius: 0.2 mm Insert size: 11 mm Thickness: 3.18 mm Clearance angle: 5° Lead/angle: 35° ISO code: 110302 Special features Coated cemented carbide construction Grade SH725: tough, edge-stable for variable engagement JS chipbreaker for controlled chip formation ISO-format for compatibility with standard holders Suitable for external and internal turning System components: insert + holder/boring bar + shim/clamp set + replacement screws Designed for smaller tools and changing engagement conditions Cylindrical hole with single-sided countersink for secure clamping FAQ What materials is this insert intended for? The VBGT110302FN-JS SH725 is a tough, edge-stable grade intended for turning applications where variable engagement or smaller-tool setups occur; chipbreaker and grade selection should be matched to the specific workpiece material and machining conditions. How does the JS chipbreaker benefit production? The JS chipbreaker on the VBGT110302FN-JS insert encourages controlled chip formation and evacuation, which improves surface finish and reduces the risk of entangling chips during interrupted cuts. What are the key dimensions to check for holder compatibility? Check the insert form, 11 mm size, 3.18 mm thickness, relief/clearance angle (5°) and hole/countersink style; these determine whether the insert seats and clamps correctly in the chosen holder. Can this insert be used for internal turning as well as external turning? Yes, the ISO rhombic format and secure clamping design make the VBGT110302FN-JS suitable for both external and internal turning when installed in an appropriate boring bar or holder. How does the 0.2 mm corner radius affect machining? A 0.2 mm corner radius reduces peak cutting forces and can improve edge strength and part finish in finishing and semi-finishing passes, particularly when machine stability is limited. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110302 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of stable edge performance and reliable chip control for consistent turning results; the coated carbide grade and JS chipbreaker minimise interruptions and support productive machining. Order the VBGT110302FN-JS SH730 directly via Metav Werkzeuge or request advice from our consultants for tool holder compatibility. VBGT 110302 SH730 – ISO turning insert for robust, edge-stable performance (Tungaloy) The VBGT110302FN-JS SH730 is an ISO‑standard rhombic turning insert intended for external and internal turning operations, providing a tough, edge-stable coated carbide grade for changing engagement conditions. ISO‑standard rhombic insert, 11 mm Coated carbide grade SH730 for stable edges JS chipbreaker for reliable chip control Cylindrical centre hole with 40°–60° countersink Consistent chip control for uninterrupted production The combination of the JS chipbreaker and the SH730 coated carbide grade delivers controlled chip formation and extended edge life under varying engagement conditions. This configuration reduces the need for frequent edge changes and stabilises cycle times in batch and small-series production. The insert’s geometry focuses cutting forces predictably, which supports higher material removal rates while maintaining surface quality. Emphasis on predictable chip flow helps lower downtime and increases overall process efficiency. ISO compatibility reduces setup complexity and tooling risks Engineered to ISO dimensions, the insert guarantees repeatable seating and clamping when paired with a matched external holder or boring bar. Compatibility is determined by form, 5° relief angle, tolerance class, fastening method, size and thickness; conformity to these parameters simplifies tool selection and reduces trial-and-error at setup. A standardised insert like this accelerates changeovers and allows stocking of a single insert type across multiple machines where the holder geometry matches, improving spare-part management and machine uptime. Designed for demanding, variable turning conditions The coated carbide composition combined with a small nose radius supports applications where tool engagement varies or when smaller tools are required. The 0.2 mm radius offers a balance between strength and the ability to produce fine contours, while the robust grade maintains cutting-edge integrity even under intermittent cuts. This makes the insert particularly suitable where workpiece stability or varying depths of cut are common—offering predictable wear behaviour and consistent surface finish without unnecessary conservatism in cutting parameters. Practical shop-floor specifications that aid selection Key geometric and mechanical details are provided to support rapid decision-making: the rhombic shape and 11 mm size allow straightforward pairing with common ISO holders; the 3.18 mm thickness and centre hole with a cylindrical hole + one-sided countersink (40°–60°) ensure secure clamping and correct axial positioning. The ISO designation and the model series clarify interchangeability across systems, while the SKU and manufacturer article number facilitate ordering and inventory tracking. These specifics help to match the insert precisely to the toolholder and machining task, reducing set-up iteration. For dependable edge stability and controlled chip formation, request technical guidance from Metav Werkzeuge or order the VBGT110302FN-JS SH730 through Metav Werkzeuge; contact info: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6853994 SKU: 6853994-Tungaloy Manufacturer article number: TUN6853994 Model series: ISO‑Drehwendeschneidplatten ISO designation: VBGT110302FN‑JS Facts Size: 11 mm Nose radius: 0.2 mm Thickness: 3.18 mm Relief angle: 5° Included angle: 35° Special features Shape: rhombic Material: carbide Grade/coating: SH730 (coated carbide) Chipbreaker: JS Hole: cylindrical centre hole + one‑sided countersink (40°–60°) Application: turning System components: ISO insert, matching external holder or boring bar, seat/clamp and replacement screws FAQ What materials is this insert intended for? The VBGT110302FN‑JS SH730 is a coated carbide insert developed as a tough, edge‑stable grade for turning where engagement conditions change; selection of the chipbreaker and grade should match the workpiece and process stability. How does the JS chipbreaker affect performance? The JS chipbreaker promotes consistent chip formation and evacuation during turning, helping to maintain cycle times and surface finish while reducing interruptions caused by poor chip control. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions; compatibility depends on holder form, relief angle, tolerance class, fastening and thickness—use matching holder specifications for secure clamping. What are the key geometric specifications to check before ordering? Verify the 11 mm size, 0.2 mm nose radius, 3.18 mm thickness, 5° relief angle and the hole style (cylindrical + one‑sided countersink 40°–60°) against the holder and application requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110302 TH10 Wendeplatten - Tungaloy
Benefit from a combination of a sharp, uncoated carbide grade and ISO compatibility that delivers low cutting forces and consistent surface quality for turning operations; order the VBGT 110302 TH10 insert directly via Metav Werkzeuge or contact our consultants for application advice. VBGT 110302 TH10 rhombic turning insert (35°, size 11) — Tungaloy The VBGT110302FL-J10 TH10 is an ISO-standard indexable insert designed for external and internal turning, optimised for non-ferrous materials and applications where a clean surface and low cutting forces are required. ISO-standard indexable insert Uncoated carbide TH10 for low cutting forces Rhombic 11 format with 35° approach angle Cylindrical hole with single-side countersink Efficient turning with low cutting forces and fine finishes The combination of an uncoated carbide edge and the TH10 grade provides a sharp, universal cutting geometry that reduces cutting resistance and promotes a clean surface finish on non-ferrous materials. Where coating might raise cutting forces or smear soft alloys, the uncoated grade supports lower feed forces and improved part quality. This results in longer stable cycles on delicate components and fewer secondary finishing operations, making the insert a practical choice for high-yield and precision turning tasks. Secure fit and straightforward integration into ISO systems With an ISO designation and a compact 11 size, the insert is engineered for reliable seating in standard holders. The 3.18 mm thickness and 5° relief ensure predictable contact geometry, while the rhombic form and 35° approach angle give a controllable cutting engagement. Compatibility to a toolholder depends on form, relief angle, tolerance class, fastening and plate thickness; selecting the matching clamping plate and screw secures repeatable positioning, which helps to reduce set-up time and maintain dimensional consistency in production. Controlled chip formation and versatile application range The J10 chipbreaker is tuned to moderate chip fragmentation and evacuation during both external and internal turning. A 0.2 mm corner radius balances edge strength with the ability to produce fine contours and tight radii, while the cylindrical hole with a single-side countersink (40°–60°) allows secure fastening and easy index changes. The insert suits tasks where an uncoated, sharp cutting edge is preferred—for example machining aluminium, brass and other non-ferrous alloys—providing predictable chip flow and minimised burr formation in standard turning applications. Contact Metav Werkzeuge for tailored application recommendations or to request the VBGT 110302 TH10 insert and matching clamping components; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and ordering Technical data Article number: 6811505 Manufacturer SKU: TUN6811505 SKU: 6811505-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts WPL designation: VBGT110302FL-J10 TH10 Facts Corner radius: 0.2 mm Main angle: 35° Relief angle: 5° Thickness: 3.18 mm Plate size: 11 Special features Rhombic plate form Cylindrical hole with single-side countersink (40°–60°) Chipbreaker: J10 Grade: TH10, uncoated carbide Typical application: external and internal turning System composition: ISO insert, matching holder, shim/clamp and screws Sharp universal grade for non-ferrous materials, supporting low cutting forces and clean surfaces FAQ What materials is this insert best suited for? The VBGT110302FL-J10 TH10 insert is designed primarily for non-ferrous materials and operations where an uncoated edge yields low cutting forces and a clean surface finish. How does the J10 chipbreaker affect machining? The J10 chipbreaker helps to control chip shape and evacuation during turning cycles, improving process stability and reducing the risk of entanglement in both external and internal operations. What does the 0.2 mm corner radius mean for edge strength and finish? A 0.2 mm corner radius provides a compromise between edge robustness and the ability to produce fine contours, offering acceptable tool life while still delivering good surface quality. Is the insert compatible with standard ISO holders? Yes. The insert follows ISO dimensions; compatibility depends on holder form, relief angle, tolerance class, fastening type and plate thickness, so selection of the correct holder and clamping parts is essential. How is the insert secured in the holder? The plate features a cylindrical hole with a single-side countersink (40°–60°) for secure fastening using the appropriate screw and clamp or clamping plate. Can this uncoated grade be used on coated-material applications? The TH10 uncoated grade is chosen where a sharp, low-resistance edge is advantageous; for applications demanding coated performance or higher wear resistance, a coated grade should be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110302 TH10 Wendeplatten - Tungaloy
Take advantage of a proven combination of ISO compatibility, a sharp uncoated carbide grade and a small corner radius for consistent finishing results; order or discuss requirements with Metav Werkzeuge for tailored holder recommendations. VBGT 110302 TH10 — ISO turning insert (rhombic, 11 mm, 0.2 mm radius) by Tungaloy A VBGT 110302 TH10 ISO turning insert engineered for external and internal turning, offering a sharp, uncoated carbide grade suited to non-ferrous work and low-force finishing. ISO-standard rhombic insert 11 mm Uncoated carbide grade TH10 for clean edges 0.2 mm corner radius for finishing cuts Cylindrical hole with 40°–60° single-side countersink Raise productivity with low cutting forces and clean finishes The combination of the TH10 uncoated carbide grade and the chipbreaker J10 provides a balance between sharp cutting action and reliable chip control for many non-ferrous applications. This results in lower cutting forces and a clean surface finish, reducing rework and enabling higher throughput on finishing passes. The sharp edge geometry supports efficient metal removal where light cuts and high-quality surfaces are required, making the insert particularly suitable for precision turning tasks. Fast integration into ISO holder systems and stable clamping Compatibility with ISO holders is determined by form, clearance and attachment details; the rhombic 11 mm geometry, 3.18 mm thickness and central hole with a single-side countersink (40°–60°) enable straightforward mounting into standard external holders or boring bars. The 5° clearance angle and the specified tolerance class ensure predictable seat fit and repeatable positioning, which reduces setup time and increases process reliability across batch production. Select the right edge preparation for consistent results A 0.2 mm radius provides a compromise between sharpness and edge strength, delivering fine finishing capability while still resisting premature chipping in less stable set-ups. For best results, match the chipbreaker J10 and the TH10 grade to the specific material and machining strategy: the uncoated carbide excels in reducing built-up edge on non-ferrous metals and in applications where low cutting forces are prioritised. This approach helps to extend effective tool life and maintain consistent dimensional accuracy. For specific holder compatibility or to discuss whether the VBGT 110302 TH10 insert fits a particular turning task, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast availability. Technical Data Article number: 6811508 SKU: 6811508-Tungaloy Manufacturer SKU: TUN6811508 Brand: Tungaloy Facts Size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 5° Lead/approach angle: 35° Hole: cylindrical hole + single-side countersink (40°–60°) Special features Material: carbide Grade: TH10 (uncoated) Chipbreaker: J10 Shape: rhombic Model series: ISO turning inserts Application: turning (external and internal) FAQ What materials is this insert best suited for? The VBGT 110302 TH10 insert is optimised for non-ferrous materials and applications where an uncoated carbide edge supports low cutting forces and clean surfaces. How is the insert clamped in a holder? Mounting uses the central cylindrical hole with a single-side countersink (40°–60°); compatibility is achieved through matching form, size, thickness and tolerance class to the chosen ISO holder. What does the 0.2 mm radius mean for machining? A 0.2 mm corner radius gives a finer cutting edge for finishing work while providing sufficient edge strength to avoid chipping in stable setups. Is the insert suitable for both external and internal turning? Yes, the insert’s rhombic shape and ISO geometry allow use in both external and internal turning operations when paired with the correct holder. Which chipbreaker should be chosen for mixed-material batches? The J10 chipbreaker included with this grade is a versatile option; for mixed batches, selecting the chipbreaker and grade combination that matches the dominant material will improve performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110304 AH725 Wendeplatten - Tungaloy
VBGT 110304 AH725 ISO-Drehwendeschneidplatte zum Drehen von Tungaloy VBGT110304N-JS AH725 bietet universelle Einsatzmöglichkeiten beim Außen- und Innendrehen und vereint Prozesssicherheit mit PVD-beschichtetem Hartmetall Universelle AH725-Sorte für Stahl und rostfreien Stahl PVD-beschichtetes Hartmetall für hohe Standzeit 35° Rhombische Form für stabile Schnittführung 0,4 mm Eckenradius für präzise Konturen Mit zylindrischem Loch und einseitiger Senkung Hohe Prozesssicherheit durch Beschichtung und Werkstoffauswahl Die AH725-Sorte kombiniert ein PVD-beschichtetes Hartmetall mit einer auf Stabilität ausgelegten Spanformer-Geometrie, wodurch sich eine zuverlässige Spanbildung bei wechselnden Werkstoffen ergibt. Besonders beim Bearbeiten von Stahl und rostfreiem Stahl sorgt die Beschichtung für reduzierte Reibung an der Schneidkante, was die Standzeit verlängert und Ausbrüche minimiert. Diese Kombination ist geeignet für kleinere Werkzeuge und Anwendungen mit hoher Forderung an konstante Fertigungsqualität. Präzise Geometrie für gleichbleibende Oberflächenqualität Die rhombische Plattenform mit 35° und ein Freiwinkel 5° erzeugt eine stabile Schnittführung und unterstützt saubere Spanabfuhr sowie konstante Oberflächen. Der Eckenradius 0,4 mm ermöglicht feine Konturen bei gleichzeitig ausreichender Kantenstabilität, wodurch sich die Produktivität bei Serienfertigung steigern lässt. Durch die ISO-genormte Ausführung bleibt die Kompatibilität zu Haltern und Bohrstangen gewährleistet, sofern Form, Befestigung und Dicke passen. Systemgedanke: Auswahl von Spanformer und Halter Für optimale Ergebnisse ist die Abstimmung von Spanformer und Werkstoff entscheidend; die vorliegende Ausführung trägt den JS-Spanformer, der bei variierenden Schnittbedingungen gute Spankontrolle bietet. Das System umfasst die ISO-Drehplatte, passenden Außenhalter oder Bohrstange sowie Unterlage und Klemmsatz; Austauschschrauben sind bei Bedarf zu beachten. Die VBGT110304N-JS AH725 ist damit vielseitig einsetzbar im Außen- und Innendrehen. Wirtschaftlichkeit durch Langlebigkeit und Austauschbarkeit Die PVD-Schicht reduziert Verschleiß an der Schneidkante und führt zu längeren Wechselintervallen, was Rüstzeiten und Werkzeugkosten senkt. Die ISO-Normierung erleichtert die Ersatzteilverwaltung, da Platten nach festgelegten Maßen getauscht werden können. Für Betriebe mit wechselnden Werkstoffen bietet die Kombination aus Hartmetall und optimierter Geometrie eine effiziente Balance aus Leistung und Wirtschaftlichkeit. Für Beratung und Bestellung: Kontaktaufnahme über Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930. Produktmerkmale Artikelnummer: 6857012 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: VBGT110304N-JS Daten Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Material: Hartmetall Beschichtung: PVD Sorte: AH725 (universelle, ausbruchfeste Sorte) Spanbrecher: JS Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen FAQ Für welche Werkstoffe eignet sich die VBGT110304N-JS AH725 am besten? Die VBGT110304N-JS AH725 von Tungaloy ist für Stahl und rostfreien Stahl ausgelegt; die universelle Sorte AH725 bietet zudem gute Leistungen bei wechselnden Werkstoffen. Wie wirkt sich die AH725-Beschichtung auf die Standzeit aus? Die PVD-Beschichtung der AH725-Sorte reduziert Schneidkantenverschleiß, was die Wechselintervalle verlängert und so die Standzeit der Tungaloy Wendeplatte mit der Artikelnummer 6857012 verbessert. Passt die Wendeplatte auf vorhandene ISO-Halter? Die ISO-Genormung der VBGT110304N-JS gewährleistet Kompatibilität zu Haltern, sofern Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke übereinstimmen. Welcher Spanformer ist für schwierige Spanabfuhr empfehlenswert? Der verbaute JS-Spanformer auf der VBGT110304N-JS AH725 bietet gute Spankontrolle; bei speziellen Fällen kann die Auswahl eines anderen Spanformers die Abfuhr weiter optimieren. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110304 AT9530 Wendeplatten - Tungaloy
VBGT110304 AT9530 – ISO-Drehwendeschneidplatte zum Drehen von Tungaloy Die VBGT110304 AT9530 ist eine ISO-genormte Drehwendeschneidplatte für präzise Schlicht- und Leichtbearbeitung von Stahl Präzise Schlichtung dank Cermet-Beschichtung AT9530 Hohe Passgenauigkeit für ISO-Halter und Bohrstangen Stabiler Eckenradius 0,4 mm für gleichmäßigen Verschleiß Zylindrisches Loch mit Senkung 40°–60° für sichere Befestigung Rhombische Form 11 mm für Außen- und Innendrehen Effizienzsteigerung durch Cermet-Beschichtung und Oberflächengüte Die Kombination aus beschichtetem Cermet und optimierter Spanführung sorgt für eine spürbare Verbesserung der Oberflächengüte bei Schlichtoperationen. Durch die Sorte AT9530 wird der Verschleiß gleichmäßig verteilt, was die Standzeit erhöht und Rüstzyklen reduziert. Anwender in der Serienfertigung profitieren von reproduzierbaren Ergebnissen und geringer Nacharbeit, weil die Schneidkante stabil bleibt und feine Schnittbilder ermöglicht. Passgenauigkeit und einfache Integration in ISO-Systeme Die Platte ist ISO-genormt und passt über Form, Freiwinkel und Maße direkt in standardisierte Haltersysteme, wodurch Werkzeugwechsel schnell und zuverlässig erfolgen. Der Freiwinkel 5° und die genauen Toleranzklassen reduzieren Einstellaufwand an der Maschine. Anwender erreichen so kürzere Stillstandszeiten und höhere Maschinenverfügbarkeit durch unkomplizierte Integration in bestehende Spann- und Halterlösungen. Materialwahl, Spanformer und Einsatzbereiche für produktive Zerspanung Das Hartmetall-Substrat kombiniert mit der Cermet-Beschichtung eignet sich speziell für Stahlbearbeitung bei Schlicht- und Leichtaufgaben. Der Spanbrecher JS fördert gleichmäßige Spanbildung und einfache Spanabfuhr, was besonders bei langen Schnitten und stabilen Aufspannungen hilfreich ist. Mit Eckenradius 0,4 mm und Plattendicke 3,18 mm ist die Platte ideal für präzise Lohnfertigung, Maschinenbau und Feinbearbeitung, wo Konsistenz und Oberflächenqualität zählen. Für technische Beratung oder Bestellung die VBGT110304 AT9530 über Metav Werkzeuge anfragen; Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 verfügbar. Produktmerkmale Artikelnummer: 6967276 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Daten Radius: 0,4 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 mm Eckenradius: 0,4 mm Besonderheiten Material: Hartmetall Schneidstofftyp: beschichtetes Cermet Sorte/Beschichtung: AT9530 (für hohe Oberflächengüte) Spanbrecher: JS Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen WPL-Bezeichnung: VBGT110304N-JS Kompatibilität: ISO-genormt FAQ Ist die Platte für die Schlichtbearbeitung von Stahl geeignet? Die VBGT110304N-JS AT9530 von Tungaloy ist speziell für Schlicht- und Leichtbearbeitung von Stahl ausgelegt und liefert aufgrund der Cermet-Beschichtung hohe Oberflächengüten bei gleichmäßigem Verschleiß. Welchen Eckenradius hat die Platte und welche Auswirkungen hat das? Der Eckenradius beträgt 0,4 mm; dieser Wert sorgt für eine gute Balance zwischen Schnittstabilität und Feinheit der Oberfläche, ideal für präzise Schlichtoperationen. Wie wird die Platte im Haltersystem befestigt? Die Platte verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°), wodurch eine sichere Befestigung in ISO-Haltern und Bohrstangen gewährleistet ist. Welche Rolle spielt der Spanbrecher JS bei der Bearbeitung? Der Spanbrecher JS unterstützt eine kontrollierte Spanbildung und verhindert lange, fadenförmige Späne; das verbessert die Fertigungszuverlässigkeit und reduziert Spanstau. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110304 J740 Wendeplatten - Tungaloy
VBGT 110304 J740 ISO-Drehwendeschneidplatten für Drehen von Tungaloy VBGT 110304 J740 liefert verschleißoptimierte Hartmetallplatten für präzises Außen- und Innendrehen in industriellen Fertigungsprozessen Rhombische Plattenform 11 mm Eckenradius 0,4 mm für feine Konturen Freiwinkel 5° für stabile Schneidkante Zylindrisches Loch mit einseitiger Senkung 40°–60° Hartmetall-Sorte J740 für lange Standzeit Langlebigkeit durch Material und Sorte Die Hartmetall-Zusammensetzung der Platte in Verbindung mit der Sorte J740 wurde entwickelt, um eine ausgewogene Kombination aus Verschleißfestigkeit und Zähigkeit zu bieten. Diese Eigenschaft reduziert Werkzeugwechsel und sorgt für konstante Bauteilqualität bei Serienfertigung. Für Anwender bedeutet das weniger Stillstand und planbare Produktionszyklen. Präzise Geometrie für stabile Prozesse Die rhombische Plattenform mit einem Winkel von 35° und einem Freiwinkel von 5° ermöglicht sichere Spanabfuhr und gleichmäßige Schnittkräfte. Der Eckenradius von 0,4 mm unterstützt die Bearbeitung feiner Konturen ohne übermäßige Kantenausbrüche. Der eingebaute Spanbrecher J10 optimiert Spanform und Senktemperatur für ruhige Schnitte. ISO-Norm und Systemkompatibilität schaffen Austauschbarkeit Als ISO-genormte Wendeschneidplatte passt das Produkt in zahlreiche Standardhalter; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Wer den passenden Außenhalter und die passende Unterlage wählt, profitiert von einfacher Montage und schneller Ersatzteilversorgung. ISO-genormt bedeutet standardisierte Maße für sicheren, schnellen Austausch. Anwendungsbereich und Anwendernutzen Konzipiert für das Drehen, eignet sich die Platte für Außen- und Innendrehaufgaben in Fertigung, Lohnbearbeitung und Instandhaltung. Die Kombination aus Geometrie und Schneidstoff macht die Platte besonders geeignet für Anwendungen, die gleichbleibende Oberflächenqualität und reproduzierbare Bauteilmaße erfordern. Anwender erhalten damit eine produktive Lösung für mittel- bis großserielle Fertigung. Empfehlung: Die VBGT110304FL-J10 J740 direkt über Metav Werkzeuge beziehen oder die Anwendungstechnik für eine individuelle Prozessberatung kontaktieren – eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6811511 SKU: 6811511-Tungaloy Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBGT110304FL-J10 J740 Fakten Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Material: Hartmetall Schneidstoffsorte: J740 Spanbrecher: J10 Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Einsatz: Drehen Schneidstofftyp: Tungaloy-Schneidstoffsorte FAQ Für welche Bearbeitungen eignet sich diese Wendeschneidplatte am besten? Die VBGT110304FL-J10 J740 von Tungaloy ist für Außen- und Innendrehen ausgelegt und liefert stabile Schnittergebnisse bei Serienfertigung dank optimierter Geometrie und Sortenbalance. Welche Vorteile bietet die Sorte J740 konkret? Die Sorte J740 kombiniert Verschleißfestigkeit und Zähigkeit, wodurch die VBGT110304FL-J10 J740 längere Standzeiten und konstante Oberflächengüten ermöglicht, besonders bei variierenden Schnittbedingungen. Wie beeinflusst der Eckenradius von 0,4 mm die Bearbeitung? Der Eckenradius 0,4 mm erlaubt präzise Konturarbeit und reduziert Kantenausbrüche; für grobe Schruppaufgaben kann eine größere Radienwahl sinnvoll sein. Passt die Platte in alle ISO-Halter? Als ISO-genormte Platte ist die VBGT110304FL-J10 J740 mit vielen Standardhaltern kompatibel; die Anpassung an Form, Freiwinkel und Befestigungsart entscheidet über die tatsächliche Passgenauigkeit. Wie wirkt sich der Spanbrecher J10 aus? Der Spanbrecher J10 fördert eine kontrollierte Spanabfuhr und senkt die Temperatur am Schneidprozess, was die Standzeit der VBGT110304FL-J10 J740 positiv beeinflusst. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110304 J9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, Tungaloy's J9530 grade and a compact 0.4 mm corner radius for consistent edge stability and efficient turning. Order the inserts directly via Metav Werkzeuge or request technical advice from the consultants. VBGT 110304 J9530 VBGT ISO 110304 — Turning insert by Tungaloy A VBGT110304L-J10 J9530 rhombic indexable insert designed for ISO‑standard turning operations, offering reliable wear resistance and stable cutting-edge performance. ISO‑standard rhombic insert, compatible holders J9530 Tungaloy grade for wear and edge stability 0.4 mm corner radius for precise profiling Cylindrical hole with 40°–60° countersink Consistent productivity through ISO compatibility and geometry The ISO‑standard rhombic geometry ensures predictable seating and repeatable results when used with matching external holders or boring bars. Compatibility depends on form, clearance angle, tolerance class, fastening and thickness; the ISO‑standard specification simplifies tool selection and reduces setup time. The combination of the rhombic shape, a defined 5° clearance angle and a 3.18 mm plate thickness provides a stable interface between insert and holder, which minimises vibrations and supports consistent surface finish in serial production runs. Cutting performance and material behaviour explained Manufactured from high‑performance carbide and specified as grade J9530, this insert balances wear resistance with edge toughness to extend tool life under typical turning loads. The integrated J10 chipbreaker assists controlled chip formation for many materials encountered in workshop turning. For operators unfamiliar with insert grades: J9530 denotes a Tungaloy carbide specification optimised for turning, providing a compromise between abrasive wear resistance and chipping resistance that is particularly useful in mixed‑material production environments. Design details that support secure clamping and precise cuts The insert features a 0.4 mm corner radius, enabling fine profiling and repeatable corner transitions without excessive notch wear. The centre cylindrical hole with a single‑side countersink (40°–60°) ensures positive screw seating and concentric clamping, reducing the risk of tilt or rotation under cutting forces. Where accurate edge position is required, the small corner radius reduces dimensional deviation while the plate’s 11 mm size and 3.18 mm thickness maintain mechanical rigidity during aggressive cuts. Practical application and handling recommendations Intended for general turning, both external and internal, the insert performs best when the holder geometry and the selected chipbreaker match the workpiece material and machining strategy. For roughing, select a chipbreaker and cutting data that favour higher feed rates with robust edge support; for finishing, lower feeds combined with the 0.4 mm radius yield improved surface integrity. The insert integrates into a system comprising an ISO‑compatible pad, clamp set and replacement screws, allowing fast changeovers and minimal downtime. Choose Tungaloy VBGT110304L-J10 J9530 inserts for reproducible turning performance — contact Metav Werkzeuge for availability and application guidance. Technical data Article number: 6723938 Manufacturer SKU: TUN6723938 Model designation: VBGT110304L-J10 Material: carbide Grade: J9530 Specifications Corner radius: 0.4 mm Clearance angle: 5° Included angle/wedge: 35° Plate thickness: 3.18 mm Plate size: 11 Design & features Rhombic plate form Cylindrical hole with single‑side countersink (40°–60°) Chipbreaker: J10 ISO‑standard turning insert series Intended application: turning FAQ Is this insert suitable for both external and internal turning? Yes. The VBGT110304L-J10 J9530 insert is designed for both external and internal turning operations when paired with a compatible ISO holder and appropriate clamping hardware. What advantages does the J9530 grade provide? The J9530 grade from Tungaloy delivers a balance of wear resistance and edge stability, extending tool life and maintaining cutting performance across a range of turning applications. How does the hole and countersink benefit clamping? The cylindrical hole combined with a 40°–60° single‑side countersink ensures secure screw seating and concentric clamping, reducing the risk of insert movement and improving repeatability for the VBGT110304L-J10 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110304 J9530 Wendeplatten - Tungaloy
VBGT 110304 J9530 ISO-Drehwendeschneidplatte für Drehen — Tungaloy VBGT110304R-J10 J9530 verbindet Hartmetall‑Performance mit stabiler Schneidkantenführung für Außen‑ und Innendrehen Hartmetall mit J9530‑Schneidstoff Rhombische Form, 11 mm Kantenlänge Mit zylindrischem Loch + einseitiger Senkung 40°–60° 0,4 mm Eckenradius für präzise Schnittkante Freiwinkel 5° für vielseitige Werkstoffe Höhere Prozesssicherheit durch optimierte Schneidstoffkombination Die Kombination aus Hartmetall‑Substrat und der Sorte J9530 sorgt für eine ausgeglichene Balance zwischen Verschleißfestigkeit und Zähigkeit. Dadurch bleibt die Schneidkante länger stabil, was zu konstanteren Schnittkräften und reproduzierbaren Ergebnissen führt. Anwender profitieren von höherer Produktivität, weil Rüst‑ und Nacharbeitszeiten reduziert werden. Effiziente Anwendung beim Außen‑ und Innendrehen Für typische Drehanwendungen ist die Platte so ausgelegt, dass sie mit gängigen ISO‑Haltern kompatibel ist. Die ISO‑Drehplatte ist für Außen‑ und Innendrehen geeignet; bei der Halterauswahl sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke zu berücksichtigen. Kunden, die unterschiedliche Werkstoffe bearbeiten, wählen passenden Spanbrecher und Sorte für optimale Spanbildung. Kompakte Geometrie für präzise Schnittkanten und Wiederholgenauigkeit Die rhombische Plattenform mit einer Kantenlänge von 11 mm und einem Eckenradius von 0,4 mm ermöglicht enge Radien und feine Übergänge. Der Freiewinkel von 5° unterstützt kontrollierte Spanabfuhr und reduziert Schnittkräfte bei wechselnden Zustellungen. Solche Geometrien helfen, die Oberflächengüte zu verbessern und Maßhaltigkeit über mehrere Werkstücke hinweg zu sichern. Montage und Kompatibilität einfach erklärt Die Platte ist mit einem zylindrischen Loch und einer einseitigen Senkung (40°–60°) versehen, wodurch die Befestigung an Standard‑Außenhaltern unkompliziert erfolgt. Beim Austausch empfiehlt sich der Abgleich von Plattenform, Plattendicke und Toleranzklasse, um Passgenauigkeit und sichere Klemmung zu gewährleisten. Ersatzschrauben und Unterlagen sind beim Systemaufbau oft erforderlich. Wirtschaftlichkeit und Serienfertigung Wegen der ausgeglichenen Materialeigenschaften der Sorte J9530 und der robusten Hartmetallbasis ergeben sich längere Standzeiten und geringere Ausfallraten in der Serienfertigung. Für Fertigungsleiter bedeutet das: weniger Rüstzyklen, konstantere Bearbeitungszeiten und damit bessere Maschinenverfügbarkeit. Die Platte ist damit eine wirtschaftliche Wahl für produktive Zerspanung. Empfehlung: Vertrauen Sie auf die J9530‑Sorte von Tungaloy als zuverlässige Lösung für produktive Drehprozesse und fordern Sie ein individuelles Angebot bei Metav Werkzeuge an – Kontakt: info@metav-werkzeuge.com, Tel. +49 2822 7131930 Produktmerkmale Artikelnummer: 6723939 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: VBGT110304R-J10 J9530 Hersteller SKU: TUN6723939 Daten Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Plattenform: rhombisch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: J10 Sorte: J9530 Schneidstofftyp: Hartmetall Anwendung: Drehen ISO: Industriestandard für Wendeschneidplatten FAQ Ist die Platte für Außen‑ und Innendrehen geeignet? Ja, die VBGT110304R-J10 J9530 von Tungaloy ist ausdrücklich für Außen‑ und Innendrehen konzipiert und wird typischerweise mit passenden Außenhaltern oder Bohrstangen eingesetzt. Welche Maße und Winkel sind relevant für die Auswahl? Wichtige Werte sind Plattengröße 11 mm, Plattendicke 3,18 mm, Eckenradius 0,4 mm, Winkel 35° und Freiwinkel 5°, die alle Einfluss auf Schnittbild und Halterkompatibilität haben. Wie montiere ich die Platte sicher? Die Platte verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°); zur sicheren Montage sollten Halterform, Befestigungsart und Toleranzklasse übereinstimmen. Bei Bedarf prüfen Sie Schrauben und Unterlage. Für welche Einsatzbedingungen ist die Sorte J9530 ausgelegt? Die Sorte J9530 von Tungaloy wurde für das Drehen entwickelt und kombiniert Verschleißfestigkeit mit Zähigkeit, um stabile Spanbildung und konstante Standzeiten in der Serienbearbeitung zu liefern. Welche Kennung und Bestellinformation ist praktisch für die Beschaffung? Als Referenz dienen Bezeichnung VBGT110304R-J10 J9530, Artikelnummer 6723939 und SKU TUN6723939 zur einfachen Identifikation bei Bestellung und Lagerhaltung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated cermet cutting edge (NS9530) and a 0.4 mm corner radius to achieve consistently high surface quality in finishing operations; order the VBGT110304FN-JS NS9530 indexable inserts directly via Metav Werkzeuge or consult our advisors if assistance is required. VBGT 110304 NS9530 — ISO turning insert for precision finishing (Tungaloy) VBGT 110304 NS9530 is an indexable insert for precision turning, designed for fine finishing of steel components ISO-indexable turning insert VBGT110304 NS9530 uncoated cermet for finishing 0.4 mm corner radius for fine surfaces Cylindrical hole with 40°–60° countersink Achieve superior surface finish with a cutting-edge cermet The NS9530 grade is an uncoated cermet developed for finishing applications on steel. Its composition and the sharp cutting edge result in low cutting forces and reduced vibration, which directly improves surface integrity and dimensional conformity. The small 0.4 mm corner radius supports fine-detail work and consistently smooth finishes during continuous cuts and small depths of cut. For customers seeking predictable surface quality, the combination of material and geometry provides a reliable basis for reducing subsequent grinding or polishing operations. Reliable fit and repeatable clamping for consistent productivity The insert follows ISO geometry for the VBGT form and is supplied as VBGT110304FN-JS, which simplifies integration with standard holders. Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; the 35° included angle and 3.18 mm plate thickness ensure stable seating in many common turning holders. The cylindrical hole with single-sided countersink (40°–60°) promotes secure clamping and repeatable indexability, reducing downtime associated with re-clamping and insertion indexing. This stability supports predictable tool life and lower scrap rates in series production. Productivity advantages and application guidance for turning Equipped with the JS chipbreaker, this insert is tuned for controlled chip formation during finishing passes. The combination of an uncoated cermet and a precise chipbreaker yields low built-up edge formation and excellent surface integrity when machining steels under continuous cutting conditions. Selection of this insert supports shorter cycle times by allowing higher feed stability at small depths of cut and contributes to tool-cost efficiency through consistent edge performance. When selecting grades and chipbreakers, match the JS geometry and NS9530 grade to material condition, machine rigidity and desired surface specification to maximise productivity. Contact Metav Werkzeuge today for tailored advice on Tungaloy VBGT110304FN-JS NS9530 indexable inserts and to arrange supply through Metav Werkzeuge Technical Data Article number: 6967238 Manufacturer SKU: TUN6967238 SKU: 6967238-Tungaloy Label: VBGT110304FN-JS NS9530 Core data Corner radius: 0.4 mm Included angle: 35° Plate thickness: 3.18 mm Plate size: 11 mm Design & features Cutting material: uncoated cermet (NS9530) Chipbreaker: JS Plate form: rhombic Hole: cylindrical hole + single-sided countersink (40°–60°) Application: turning Suitable for continuous cuts and small depths of cut ISO‑standard VBGT geometry for compatibility with ISO holders FAQ What materials is this insert designed for? The NS9530 grade is optimised for finishing operations on steel; the VBGT110304FN-JS NS9530 insert is particularly suited to continuous cuts and small depths of cut on steel workpieces. How does the JS chipbreaker affect machining? The JS chipbreaker promotes controlled chip formation and reduced built-up edge; when used with the NS9530 uncoated cermet, it supports stable finishing and improved surface quality. Is the insert compatible with standard ISO holders? Yes — the VBGT geometry and specifications (form, relief angle, tolerance class, size and thickness) are intended for ISO-compatible holders; secure clamping is assisted by the cylindrical hole and the 40°–60° countersink. Which dimensional details help ensure repeatable clamping? Key dimensions include the 3.18 mm plate thickness, 11 mm plate size and the cylindrical hole with single-sided countersink, which together enable repeatable seating and indexing in standard clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110304 NS9530 Wendeplatten - Tungaloy
Take advantage of the uncoated cermet grade NS9530 with a 0.4 mm corner radius and ISO compatibility to achieve reliable finishing performance in turning; order the insert directly via Metav Werkzeuge or consult our specialists for machining guidance. VBGT 110304 NS9530 — ISO turning insert VBGT110304FL-J10 for finishing (Tungaloy) The VBGT110304FL-J10 NS9530 is an ISO-standard indexable insert designed for precision external and internal turning, offering a small corner radius and a 35° approach angle for accurate geometry control. ISO-compatible indexable design for broad holder fit Uncoated cermet grade NS9530 for superior surface finish 0.4 mm corner radius for precise edge control 35° approach angle for versatile turning geometries Cylindrical hole with 40°–60° countersink for secure clamping Consistent finishing with low cutting forces The uncoated cermet composition NS9530 is engineered as a finishing grade, providing a sharp cutting edge and low cutting forces that favour continuous cuts and fine surface integrity. This material class reduces built-up edge and enhances dimensional consistency during small depths of cut, which translates into more predictable component surfaces and fewer rework cycles. The combination of a 0.4 mm corner radius and a finely tuned cutting geometry supports high-quality finishes on steels while maintaining economic tool life. Simple integration in ISO tool systems Designed as an ISO insert in a rhombic form, the component integrates into standard holders where fit relies on form, clearance angle, tolerance class, fastening, size and thickness. The insert’s rhombic shape and 3.18 mm thickness allow stable seating in external and internal holders, while the 5° clearance angle helps avoid rubbing and improves edge life. The nominal size and standard bore ensure compatibility across a wide range of clamping systems, reducing the need for special adapters and simplifying tool inventory management. Reliable chip control and secure clamping The insert features the J10 chipbreaker to support regular chip formation during finishing operations, promoting stable material removal and clear evacuation. A cylindrical hole combined with a one-sided countersink (40°–60°) provides secure clamping and repeatable seating, which is important for maintaining concentricity and reducing vibration in demanding turning tasks. These design elements contribute directly to machining stability and predictable tool performance in cycle production. Application focus and machining benefits Primarily specified for finishing on steels, the insert is optimised for continuous cutting and small feed steaks, delivering improved surface quality and reduced cutting burrs. The 35° approach angle offers a compromise between cutting edge strength and accessibility for intricate profiles, making the insert suitable for precise external contours and bore finishing. Where close tolerances and consistent surface results are required, this ISO-format indexable solution provides a dependable option for productive turning processes. For availability, batch options and tailored recommendations on using the Tungaloy VBGT110304FL-J10 NS9530 for specific steel grades, contact Metav Werkzeuge for immediate, application-oriented advice and supply. Technical data Article number: 6998057 Manufacturer SKU: TUN6998057 SKU: 6998057-Tungaloy Brand: Tungaloy Model series: ISO turning indexable inserts Facts Inscribed circle / size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 5° Approach angle: 35° Countersink: 40°–60° Special features Rhombic insert shape Uncoated cermet grade NS9530 J10 chipbreaker Cylindrical hole with one-sided countersink ISO-standard insert for turning Designed for finishing, continuous cutting and small depths of cut Suitable for external and internal turning on steel FAQ What materials is this insert best suited for? The VBGT110304FL-J10 NS9530 is a finishing-grade, uncoated cermet insert optimised for turning steels, providing low cutting forces and a high-quality surface finish. Which operations does this insert support? This ISO-format indexable insert is intended for external and internal turning operations where fine surface quality and small depths of cut are required. How does the NS9530 grade differ from coated alternatives? NS9530 is an uncoated cermet designed for sharp cutting edges and reduced cutting forces; compared with coated grades, it excels in finishing tasks with continuous cuts and when exceptional surface quality is the priority. What clamping and holder features are required? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; the VBGT110304FL-J10 features a cylindrical hole with a one-sided countersink to ensure secure, repeatable clamping. Which chip control is integrated in this insert? The insert uses a J10 chipbreaker to promote consistent chip formation during finishing, aiding evacuation and machining stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110304 SH7025 Wendeplatten - Tungaloy
VBGT 110304 SH7025 Drehwendeschneidplatte für Drehen — Tungaloy VBGT 110304 SH7025 ist eine ISO-genormte rhombische Drehwendeschneidplatte für Außen- und Innendrehen mit zähem, beschichtetem Schneidstoff für wechselnde Eingriffsbedingungen VBGT 110304 SH7025 von Tungaloy Beschichtetes Hartmetall für stabile Schneidkante Rhombische Form 11 mm mit 0,4 mm Eckenradius Mit zylindrischem Loch und einseitiger Senkung Spanbrecher J10 für vielseitige Drehanwendungen Produktivität und Schnittstabilität bei variablen Bedingungen Die beschichtete SH7025 Sorte kombiniert Hartmetall-Träger und optimierte Beschichtung für eine hohe Schnittstabilität, speziell bei kleineren Werkzeugen oder wechselnden Eingriffsbedingungen. Anwender profitieren von konsistenter Spanbildung und geringerer Nacharbeit, weil die Sorte für zähe, schneidkantenstabile Performance ausgelegt ist. Durch die Kombination aus stabilem Schneidstoff und passendem Spanbrecher J10 lassen sich Prozesssicherheit und Standzeit in der Serienfertigung erhöhen. Präzise Passform und einfache Integration in Werkzeughalter Die ISO-Ausführung garantiert die Kompatibilität zum Halter über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die rhombische Plattenform mit 11 mm Seitenlänge und ein Eckenradius von 0,4 mm ermöglicht präzise Einstiche und profilorientierte Bearbeitungen, während die Plattendicke von 3,18 mm die nötige Stabilität liefert. Das zylindrische Loch mit einseitiger Senkung (40°–60°) sorgt für sicheren Sitz und reproduzierbares Spannverhalten bei Wechselvorgängen. Für wen sich die Platte eignet und wie sie produktiv eingesetzt wird Werkstätten und Fertigungsbetriebe, die auf effizientes Drehen setzen, finden in dieser Platte eine vielseitige Lösung für allgemeine Drehaufgaben. Die Kombination aus ISO-Norm, robustem Schneidstoff und universellem Spanbrecher macht die Platte zur guten Wahl für Lohnfertiger und Inhouse-Werkzeugausrüster. Anwender sollten den Spanbrecher und die Sorte gezielt nach Werkstoff und Stabilität auswählen, um maximale Wirtschaftlichkeit und konstante Oberflächengüten zu erreichen. Empfehlung: Für zuverlässige Prozesssicherheit und lange Standzeit die SH7025-beschichtete Drehwendeschneidplatte von Tungaloy wählen und bei Fragen die Beratung von Metav Werkzeuge unter info@metav-werkzeuge.com oder Telefon +49 2822 7131930 in Anspruch nehmen Produktmerkmale Artikelnummer: 6967585 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBGT110304FL-J10 SH7025 Fakten Eckenradius: 0,4 mm Plattengröße: 11 mm Plattendicke: 3,18 mm Winkel: 35° Freiwinkel: 5° Besonderheiten Schneidstoff: SH7025 (zähe, schneidkantenstabil) Schneidstofftyp: beschichtetes Hartmetall Plattenform: rhombisch Spanbrecher: J10 (für allgemeine Drehanwendungen) Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Drehen SKU Hersteller: TUN6967585 FAQ Welche Anwendungen deckt die VBGT 110304 SH7025 ab? Die VBGT 110304 SH7025 von Tungaloy ist für allgemeine Außen- und Innendrehprozesse geeignet; der Spanbrecher J10 ermöglicht vielseitige Einsatzfälle bei wechselnden Eingriffsbedingungen. Wie stelle ich die Kompatibilität mit meinem Halter sicher? Bei der VBGT110304FL-J10 SH7025 sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke maßgeblich; prüfen Sie diese Angaben am Halter und vergleichen Sie die ISO-Bezeichnung. Welche Vorteile bietet die SH7025-Sorte gegenüber unbeschichteten Platten? Die SH7025-beschichtung erhöht die Schneidkantenstabilität und Widerstandsfähigkeit gegen Verschleiß, wodurch die Standzeit und Prozesssicherheit bei Tungaloy-Wendeschneidplatten steigen. Ist die Platte für Feinbearbeitung mit kleinen Schnitttiefen geeignet? Ja, die rhombische Plattenform und der Eckenradius 0,4 mm der VBGT 110304 SH7025 eignen sich für feine Einstiche und Profilbearbeitungen mit hoher Wiederholgenauigkeit. Welche Rolle spielt das zylindrische Loch mit Senkung? Das zylindrische Loch mit einseitiger Senkung (40°–60°) sorgt für sicheren Sitz und reproduzierbares Spannverhalten bei Plattenwechseln, was Rüstzeiten reduziert. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110304 SH7025 Wendeplatten - Tungaloy
VBGT110304FR-J10 SH7025 ISO-Drehwendeschneidplatte für Drehen von Tungaloy Die VBGT110304FR-J10 SH7025 ist eine ISO-genormte rhombische Wendeschneidplatte aus beschichtetem Hartmetall, konzipiert für präzise Außen- und Innendrehprozesse. Rhombische Platte 11 mm für universelle Halter Beschichtetes Hartmetall SH7025 für stabile Schneidkante Spanbrecher J10 für kontrollierte Spanformung Eckenradius 0,4 mm für feine Konturen Mit Loch und zylindrischer Senkung (40°–60°) Hohe Prozesssicherheit und Schnittstabilität Die Kombination aus SH7025 Beschichtung und beschichtetem Hartmetall sorgt für eine besonders zähe und schneidkantenstabile Werkstoffmatrix. Dadurch profitieren Anwender von konstanter Standzeit bei wechselnden Eingriffsbedingungen und kleineren Werkzeugen. Die robuste Schneidkante minimiert Mikroausbrüche und trägt zu gleichmäßiger Oberflächenqualität bei. Einfache Auswahl und Kompatibilität zum Werkzeugsystem Die Kompatibilität zur Halterung richtet sich nach Form, Freiwinkel 5°, Toleranzklasse, Befestigung, Größe und Dicke. Die VBGT110304FR-J10 SH7025 lässt sich in ISO-konforme Außenhalter und Bohrstangen einbauen; dabei gewährleistet die rhombische Plattenform einfache Indexierbarkeit und vielseitige Einsatzmöglichkeiten beim Drehen. Zielgruppe und typische Anwendungen Entwickelt für Zerspanungsbetriebe und Feinmechaniker, die präzise Außen- und Innendreharbeiten ausführen. Die Platte eignet sich besonders für Anwender, die bei wechselnden Zuständen auf stabile Spanbildung und wiederholgenaue Ergebnisse angewiesen sind. Der J10 Spanbrecher ist für kontrolliertes Spanverhalten ausgelegt, was Rüstzeiten reduziert und die Prozesssicherheit erhöht. Kurze Erklärung wichtiger Begriffe Spanbrecher J10: Mechanische Kontur auf der Schneide, die Späne bricht und kontrolliert ableitet, um Maschinenlauf und Oberflächenqualität zu verbessern. Eckenradius 0,4 mm: Definiert die Kantenform; kleinere Radien ermöglichen feinere Konturen, größere Radien höhere Schnittstabilität. Freiwinkel 5°: Winkel zwischen Schneidkante und Werkstückoberfläche; beeinflusst Schneidkraft und Standzeit. Empfehlung: Bei Bedarf an technischer Beratung oder zur schnellen Lieferbereitschaft die VBGT110304FR-J10 SH7025 bei Metav Werkzeuge anfragen — per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6967584 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6967584 Daten Radius: 0,4 mm Plattendicke: 3,18 mm Plattengröße: 11 mm Freiwinkel: 5° Winkel: 35° Besonderheiten Material: Hartmetall Sorte/Beschichtung: SH7025 Schneidstofftyp: beschichtetes Hartmetall Spanbrecher: J10 Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) ISO-Bezeichnung: VBGT110304FR-J10 FAQ Welche Werkstoffe lässt sich mit der Platte bearbeiten? Die VBGT110304FR-J10 SH7025 von Tungaloy ist als beschichtete Hartmetallplatte ausgelegt und eignet sich für ein breites Spektrum an Stahl- und legierten Werkstoffen; die Sorte SH7025 ist besonders zäh und schneidkantenstabil. Ist die Platte für Innen- und Außendrehen geeignet? Ja, die VBGT110304FR-J10 SH7025 ist für Außen- und Innendrehen konzipiert und lässt sich in ISO-kompatible Außenhalter sowie Bohrstangen einsetzen. Wie beeinflusst der Eckenradius die Bearbeitung? Ein Eckenradius von 0,4 mm ermöglicht feinere Konturen und geringere Werkzeugkräfte bei engen Radien; für höhere Stabilität können größere Radien gewählt werden. Welche Rolle hat der Spanbrecher J10? Der J10 Spanbrecher erzeugt eine kontrollierte Spanform, reduziert Verhäufungen und verbessert die Oberflächenqualität sowie die Prozesssicherheit beim Drehen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110304 SH7025 Wendeplatten - Tungaloy
VBGT 110304 SH7025 ISO-Drehwendeschneidplatte zum Drehen — Tungaloy Die VBGT 110304 SH7025 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen, entwickelt für stabile Spanbildung und wechselnde Eingriffsbedingungen ISO-genormte Form für standardisierte Halter Beschichtetes Hartmetall SH7025 für stabile Schneidkante Rhombische Form 11 mm für vielseitige Anwendungen Eckenradius 0,4 mm für feine Konturbearbeitung Zylindrisches Loch mit einseitiger Senkung 40°–60° Produktivität bei vielseitiger Drehbearbeitung Die VBGT110304FN-JS SH7025 bietet durch die ISO-Genormung eine hohe Kompatibilität mit gängigen Außenhaltern und Bohrstangen, wodurch Rüstzeiten reduziert werden. Die Kombination aus Hartmetall und der Sorte SH7025 sorgt für eine zähe, schneidkantenstabile Schneidkante, die besonders bei kleineren Werkzeugen und wechselnden Eingriffsbedingungen Prozessschwankungen ausgleicht. Anwender profitieren von konstanter Teilequalität und geringerer Stillstandszeit. Materialeigenschaften und Standzeitvorteile Die Sorte SH7025 ist eine beschichtete, zähe Hartmetallsorte, die für dauerhafte Zerspanung ausgelegt ist. Durch die verstärkte Spanstabilität lassen sich Standzeiten erhöhen und Ausschussraten reduzieren. Die robuste Schneidkante ermöglicht reproduzierbare Ergebnisse auch bei schwankender Vorschub- oder Einspanntiefe. Für Betriebe bedeutet das weniger Werkzeugwechsel und höhere Gesamteffizienz bei Serienfertigung. Montage, Geometrie und sichere Auswahl Für eine sichere Montage sind Form, Freiwinkel und Toleranzklasse entscheidend; die Platte hat einen Freiwinkel von 5° und eine Plattendicke von 3,18 mm. Die rhombische Plattenform mit 11 mm Kantenlänge und das zylindrische Loch mit einseitiger Senkung 40°–60° sorgen für stabile Befestigung und präzise Lage im Halter. Spanformer wie JS sind passend zur Werkstoffwahl zu wählen, damit Spanabfuhr und Oberflächengüte optimiert werden. Zielgruppe und wirtschaftlicher Nutzen Die Wendeschneidplatte richtet sich an CNC-Bearbeiter in der Serien- und Einzelteilfertigung, die auf Prozesssicherheit und Wirtschaftlichkeit achten. Konstrukteure und Fertigungsleiter schätzen die einfache Auswahl dank ISO-Standard und die robuste Performance der SH7025-Sorte. Besonders in Fertigungsumgebungen mit wechselnden Schnittbedingungen bietet die Platte eine zuverlässige Balance aus Standzeit und Bearbeitungsqualität. Empfehlung: Für produktive und prozesssichere Drehprozesse die VBGT 110304 SH7025 von Tungaloy wählen und technische Beratung bei Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfordern Produktmerkmale Bezeichnung: VBGT110304FN-JS SH7025 Artikelnummer: 7743511 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Daten Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Material: Hartmetall Sorte/Beschichtung: SH7025 (zäh, schneidkantenstabil) Spanbrecher: JS (optimierte Spanbildung für wechselnde Eingriffsbedingungen) Form: rhombisch Befestigung: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen FAQ Für welche Anwendungen eignet sich die Platte besonders? Die VBGT110304FN-JS SH7025 von Tungaloy eignet sich vor allem für Außen- und Innendrehen bei wechselnden Eingriffsbedingungen und kleineren Werkzeugdurchmessern, wo stabile Spanbildung gefragt ist. Welche Vorteile bietet die Sorte SH7025? Die Sorte SH7025 ist zäh und schneidkantenstabil, was bei der VBGT110304FN-JS SH7025 zu längeren Standzeiten und konstanter Oberflächenqualität führt. Wie beeinflusst der Eckenradius die Bearbeitung? Der Eckenradius von 0,4 mm ermöglicht feine Konturbearbeitung und reduziert Kerbwirkung, wodurch die Bauteilqualität bei der Drehbearbeitung verbessert wird. Ist die Platte mit gängigen ISO-Haltern kompatibel? Ja, die ISO-Genormung der VBGT110304FN-JS SH7025 gewährleistet Kompatibilität mit standardisierten Außenhaltern und Bohrstangen, solange Form, Freiwinkel und Dicke übereinstimmen. Welche Rolle spielt der Spanbrecher JS? Der Spanbrecher JS unterstützt eine kontrollierte Spanbildung und ist besonders vorteilhaft bei wechselnden Eingriffsbedingungen, da er Spanbruch und Spanabfuhr verbessert. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110304 SH725 Wendeplatten - Tungaloy
Combine robust edge stability with precise chip control thanks to the SH725 coated carbide grade and J10 chipbreaker; this yields reliable tool life and consistent cycle times. Order the insert directly via Metav Werkzeuge or consult our specialists for optimal tool selection. VBGT 110304 SH725 — ISO turning insert VBGT110304FL-J10 by Tungaloy, 35° rhombic VBGT110304FL-J10 SH725 is an ISO-standard indexable turning insert designed for external and internal turning; optimised for stable cutting under variable engagement conditions and compact tool setups. ISO-standard rhombic insert 35° SH725 coated carbide grade 0.4 mm corner radius Cylindrical hole with single-sided countersink High process stability for consistent production The combination of the SH725 coating and coated carbide substrate supports a stable cutting edge under changing engagement conditions, which reduces unexpected tool changes and keeps machining predictable. The integrated J10 chipbreaker promotes consistent chip control, helping to avoid built-up edge and reducing downtime for chip clearance. For production environments where repeatability is essential, this configuration delivers measurable improvements in tooling life and component quality while remaining suitable for compact holders and smaller cutting geometries. Universal compatibility and secure clamping for fast tool changes As an ISO-normed indexable plate, compatibility with a holder is determined by form, clearance, tolerance class, fixing, size and thickness — parameters that ensure secure seating and repeatable positioning. The plate’s rhombic shape, cylindrical hole with a single-sided countersink (40°–60°) and a 5° clearance angle facilitate reliable clamping in most standard turning holders. A plate thickness of 3.18 mm and standard dimensions make replacement straightforward, reducing setup time and simplifying inventory management for toolrooms and job shops. Practical guidance for turning applications This insert is optimised for both external and internal turning operations where stable cutting edges are required. The small 0.4 mm corner radius balances edge strength and surface finish, making it effective for fine finishing passes or interrupted cuts when set up correctly. Selection of the chipbreaker and cutting parameters should be guided by the workpiece material and machine rigidity; the insert performs best in stable setups with correct feeds and speeds, offering a good compromise between surface quality and tool life. System integration, ordering and workshop efficiency The typical system comprises the ISO indexable plate, a matching external holder or boring bar, shims/clamping set and replacement screws. Use the article number and manufacturer SKU for fast procurement and traceability: the clear identification reduces ordering errors and shortens lead times. Keeping compatible holders and a small stock of shims or screws on hand ensures rapid spindle turnaround and supports continuous production schedules without lengthy interruptions. Contact Metav Werkzeuge today to specify the right Tungaloy turning insert (article 6737047, SKU TUN6737047) for the machining task and secure prompt delivery or technical consultation. Technical Data Article number: 6737047 Manufacturer SKU: TUN6737047 Metav SKU: 6737047-Tungaloy Name: VBGT110304FL-J10 SH725 Brand: Tungaloy Facts ISO code: 110304 Corner radius: 0.4 mm Clearance angle: 5° Included angle: 35° Plate thickness: 3.18 mm Plate size: 11 mm Chipbreaker: J10 Special features Material: coated carbide Grade: SH725 Plate form: rhombic Hole style: cylindrical hole + single-sided countersink (40°–60°) Application: turning (external and internal) System: ISO indexable plate, requires holder, shim/clamping set and screws FAQ What types of turning operations suit this insert? This insert is intended for external and internal turning; the SH725 grade and J10 chipbreaker make it particularly suitable where a stable cutting edge and reliable chip control are required. How is compatibility with a holder determined? Compatibility depends on the plate form, clearance, tolerance class, fixing method, size and thickness; ensure the holder matches the ISO geometry of the insert. What benefits does the SH725 grade provide? The SH725 coating enhances edge stability and wear resistance under varying engagement conditions, extending usable tool life compared with uncoated grades. Which features ensure secure clamping of the plate? The rhombic form, cylindrical hole with single-sided countersink and standard thickness enable consistent seating and secure fixation in compatible holders. How can the insert be ordered or identified in procurement? Use the article number 6737047 and manufacturer SKU TUN6737047 to order the specific VBGT110304FL-J10 SH725 insert and to ensure correct delivery. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110304 SH725 Wendeplatten - Tungaloy
Take advantage of a high‑stability, edge‑resistant cutting solution that combines coated carbide performance with ISO compatibility for predictable tool changeovers; ideal for external and internal turning operations. Order directly via Metav Werkzeuge or consult our specialists for assistance. VBGT 110304 SH725 — Turning insert, rhombic ISO insert by Tungaloy The VBGT110304FR-J10 SH725 is an ISO‑standard rhombic turning insert designed for external and internal turning where a tough, edge‑stable grade and reliable chip control are required ISO‑standard rhombic geometry SH725 coated carbide grade 0.4 mm corner radius, 35° lead angle Cylindrical hole with 40°–60° countersink Consistent cutting performance from a tough coated carbide grade The insert is manufactured in a coated carbide grade (SH725) that was developed for edge stability under variable engagement conditions. This composition gives a balance between wear resistance and toughness, which reduces premature chipping on interrupted cuts and during mode changes. As a result, cycle times remain stable and tool life becomes more predictable, supporting higher process efficiency and fewer unscheduled insert changes. Fast, predictable integration with existing tool systems Compliance with ISO standards ensures that the insert fits established clamping systems when size, thickness, form, clearance angle and tolerance class match the holder. The design includes a cylindrical hole with a single‑side countersink (40°–60°) for secure locating and repeatable clamping. Specifying the ISO designation and the plate parameters when ordering or checking compatibility reduces setup time and avoids mismatches at tool change. Improved surface finish and chip control through geometry The rhombic geometry with a 35° lead angle and a 0.4 mm corner radius provides a compromise between strength and accessible cutting edge for finishing and semi‑finishing passes. The integrated J10 chipbreaker promotes controlled chip formation, which supports consistent surface quality and safer chip evacuation in both external and internal turning. Choosing the correct chipbreaker and grade relative to workpiece material and machine stability directly improves process reliability. Application guidance and selection for reliable results Designed primarily for turning tasks, the insert suits both external and internal operations, and works well in smaller‑scale holders or setups with fluctuating cutting conditions. For best results, match the SH725 grade and J10 chipbreaker to the workpiece material and machining strategy; the tougher grade benefits interrupted cuts and variable engagement. For tailored recommendations on feed and speed, Metav Werkzeuge can advise based on machine rigidity and workpiece demands. For application‑specific advice or to check stock of the VBGT110304FR-J10 SH725 turning insert from Tungaloy, contact Metav Werkzeuge — technical consultants can recommend the optimal chipbreaker and confirm holder compatibility; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 6737048 SKU: 6737048-Tungaloy Manufacturer SKU: TUN6737048 Manufacturer article number: 6737048 Model series: ISO turning inserts Designation: VBGT110304FR-J10 SH725 Application: Turning Core data Plate size: 11 mm Thickness: 3.18 mm Clearance angle: 5° Lead/approach angle: 35° Corner radius: 0.4 mm ISO code: 110304 Special features Coated carbide grade SH725 Rhombic plate form J10 chipbreaker Cylindrical hole with single‑side countersink (40°–60°) ISO‑standard indexable insert Compatibility depends on form, clearance angle, tolerance class, fixing, size and thickness FAQ What types of turning operations are suitable for this insert? The VBGT110304FR-J10 SH725 is suitable for both external and internal turning where a tough, edge‑stable grade and reliable chip control are required. How is compatibility with a toolholder determined? Compatibility is determined by the insert form, clearance angle (5°), tolerance class, fixing method, plate size (11 mm) and thickness (3.18 mm); matching these parameters ensures correct fit. What advantage does the J10 chipbreaker provide? The J10 chipbreaker promotes controlled chip formation and improved evacuation, which supports consistent surface finish and safer machining under varying engagement. Can this insert be used for finishing passes? Yes, the combination of a 0.4 mm corner radius and a 35° lead angle allows for fine finishing and semi‑finishing, provided cutting parameters and machine rigidity are appropriate. What is the purpose of the insert hole and countersink? The cylindrical hole with a single‑side countersink (40°–60°) provides a secure locating feature for the clamping screw, giving repeatable positioning and stable clamping during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110304 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, SH725 coated carbide and a precise 0.4 mm corner radius for consistent turning results and reduced tool changes; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. VBGT 110304 SH725 — ISO turning insert for external and internal turning, Tungaloy VBGT110304FN-JS SH725 is an ISO-standard indexable turning insert for external and internal turning, combining a 35° rhombic geometry with a robust coated carbide grade for stable cutting under varying engagement conditions. ISO‑standard rhombic insert, 35° geometry SH725 coated carbide for edge stability 0.4 mm corner radius for precise profiling Compatible with standard external/internal holders Reliable ISO compatibility and secure clamping for fewer interruptions The ISO designation and standardised form ensure straightforward integration into existing tool systems, so the insert sits correctly by form, relief angle, tolerance class, fastening and thickness. The 35° rhombic geometry and the cylindrical hole with single‑side countersink (40°–60°) allow secure clamping in common external holders and boring bars. This compatibility reduces setup time and helps maintain a predictable tool path, which in turn supports stable cycle times and fewer unplanned stoppages. Durable coated carbide for consistent edge stability and tool life The SH725 grade is a coated carbide developed for toughness and edge reliability, especially effective for smaller tool bodies or applications with changing depths of cut. Because the grade favours stable chip formation, it helps to avoid premature chipping under interrupted cuts and varying engagement, extending usable life and improving batch consistency. The coating supports wear resistance while the substrate provides fracture toughness — a combination that balances longevity with dependable performance. Geometry optimised for precision and accessibility in turning With a 0.4 mm corner radius and an insert thickness of 3.18 mm, the geometry is tailored to fine profiling and finishing as well as medium cutting tasks. The modest corner radius gives a controllable cutting edge for accurate contours, while the compact 11 mm size and 35° lead angle facilitate access in restricted bores or close‑clearance features. Where surface finish and edge control matter, the specified relief angle of 5° contributes to lower rubbing and consistent engagement. Practical selection guidance and production benefits Choose the JS chipbreaker and the SH725 grade to match the workpiece material and the machining strategy; this pairing is advantageous for varied engagement and when tool stability may fluctuate. Using an ISO insert within a complete system — holder, shim/clamp set and spare screws — simplifies inventory and offers fast replacement on the shop floor. The result is improved throughput, reproducible component quality and cost efficiency through longer intervals between indexings and replacements. Contact Metav Werkzeuge for tailored machining advice on the Tungaloy VBGT110304FN-JS SH725 and secure the optimal insert and chipbreaker combination for the task at hand — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737148 SKU: 6737148-Tungaloy Manufacturer SKU: TUN6737148 Product name: VBGT110304FN-JS SH725 Facts Shape: rhombic Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 5° Lead angle: 35° Hole: with hole; cylindrical hole + single‑side countersink (40°–60°) Materials & features Material: carbide Grade/coating: SH725 coated carbide Chipbreaker: JS Application: turning (external and internal) Series: ISO turning indexable inserts System components: holder, shim/clamp set, spare screws FAQ What holder types are compatible with this ISO insert? The VBGT110304FN-JS SH725 is designed for standard ISO external holders and suitable boring bars when the holder matches the insert form, relief angle and thickness; ensure the clamp and shim suit the rhombic shape. For which turning tasks is this grade particularly recommended? The SH725 coated carbide grade excels in situations with variable engagement and for smaller tool bodies, offering a balance of toughness and wear resistance for both finishing and medium cutting tasks. How does the 0.4 mm corner radius affect surface finish and strength? A 0.4 mm corner radius provides precise profiling with improved edge strength compared with smaller radii, delivering a good compromise between surface quality and resistance to chipping during interrupted cuts. Can this insert be used for internal turning operations? Yes, the compact 11 mm size and 35° geometry make the insert suitable for many internal turning situations, provided the chosen holder offers sufficient clearance and rigidity. What other components are required to assemble a complete tool system? A compatible ISO external holder or boring bar, a matching shim/clamp set and replacement clamping screws form the complete system for mounting the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110304 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH730 for stable cutting, a 0.4 mm nose radius for precise contours, and ISO compatibility for straightforward tool integration; order the insert through Metav Werkzeuge or consult our team for application matching. VBGT 110304 SH730 — Turning indexable insert (rhombic, 35°) by Tungaloy A VBGT110304FN-JS SH730 indexable turning insert designed for external and internal turning, offering a JS chipbreaker and a robust coated-carbide grade for varying engagement conditions. Coated carbide grade SH730 for stable cutting Rhombic profile, 35° insert geometry 0.4 mm nose radius for precise turning Cylindrical hole with single-side countersink Consistent cutting performance for reliable cycle times The insert is manufactured from coated carbide of grade SH730, engineered for stable cutting and durable edge retention under changing cutting depths. Its JS chipbreaker reduces built-up edge and controls chips in both light and interrupted cuts, which supports predictable cycle times and reduces rework. The 0.4 mm nose radius helps to maintain dimensional accuracy on fine contours, while the combination of robust substrate and coating increases interval lengths between indexings, contributing to operational efficiency and lower tooling costs per part. Easy integration into ISO tool systems and secure clamping Designed as part of the ISO turning insert family, the component fits standard holders when matched for form, relief angle, tolerance class, fastening, size and thickness. Its rhombic profile and 35° geometry allow close approach to shoulders and effective finishing passes. The insert’s cylindrical hole with a single-side countersink (40°–60°) ensures reliable axial and radial clamping; this reduces vibration and improves repeatability. Selecting the correct holder and clamping set ensures the insert achieves its rated performance and repeatable surface finishes. Versatility across common turning tasks Optimised for general turning operations, the insert accommodates both external and internal applications and performs well in variable engagement conditions typical of small-tool or stepped features. The 3.18 mm plate thickness and the defined 5° relief angle give mechanical stability, enabling controlled cutting forces and improved edge life. For machinists seeking predictable results on a range of steels and alloys, this grade provides a balanced trade-off between toughness and wear resistance, making it suitable where both interrupted cuts and continuous turning occur. Practical benefits for shop-floor decision making Choosing this insert reduces process uncertainty: the combination of a standard ISO designation and the manufacturer’s consistent production tolerances simplifies inventory and holder selection. The SKU and article references enable traceability in procurement and stock management, supporting lean ordering and batch control. Backed by Tungaloy’s manufacturing expertise, the insert contributes to dependable part quality and supports uptime through fewer unexpected tool changes, which in turn aids on-time delivery and cost control in production planning. Contact Metav Werkzeuge for tailored holder recommendations and application advice on Tungaloy turning inserts to secure consistent productivity in your machining processes Technical data Article number: 6853993 SKU: 6853993-Tungaloy Manufacturer SKU: TUN6853993 Brand: Tungaloy Core specifications Insert designation: VBGT110304FN-JS Insert size: 11 Nose radius: 0.4 mm Relief angle: 5° Plate thickness: 3.18 mm Insert angle: 35° Design & features Coating / grade: SH730 (coated carbide) Chipbreaker: JS Plate shape: rhombic Hole: cylindrical hole + single-side countersink (40°–60°) Series: ISO turning indexable inserts Application: Turning (external and internal) FAQ What materials is this insert suitable for? The Tungaloy VBGT110304FN-JS SH730 insert is a coated carbide grade intended for general turning tasks and is suitable for a broad range of steels and mixed cutting conditions where toughness and edge stability are required. How does the JS chipbreaker affect performance? The JS chipbreaker on this insert aids chip control and reduces built-up edge, resulting in more consistent surface finish and extended edge life during both continuous and interrupted turning. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; matching these parameters to the VBGT110304FN-JS ensures secure clamping and optimal performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBGT 110304 TH10 Wendeplatten - Tungaloy
VBGT 110304 TH10 ISO-Drehwendeschneidplatte zum Drehen von Nichteisenwerkstoffen Die VBGT110304FR-J10 TH10 ist eine ISO-genormte, rhombische Wendeplatte für Außen- und Innendrehen, ausgelegt für saubere Oberflächen und niedrige Schnittkräfte bei Nichteisenwerkstoffen VBGT110304FR-J10 TH10 von Tungaloy Unbeschichtetes Hartmetall für saubere Kanten Rhombische Form, 11 mm Seitenlänge Eckenradius 0,4 mm für feine Konturen Mit Loch und einseitiger Senkung für sichere Fixierung Kompakte Universallösung für präzises Drehen Die VBGT110304FR-J10 TH10 bietet mit ihrer rhombischen Form und dem kleinen Eckenradius eine präzise Kantengestaltung, die besonders bei feinen Konturen und Detailarbeiten überzeugt. Durch die Kombination aus scharfer Schneidkante und optimierter Spanform lässt sich die Produktivität steigern, weil Ausschuss reduziert und Nacharbeitsaufwand minimiert wird. Anwender in Präzisionswerkstätten profitieren von gleichmäßigen Ergebnissen bei Serien- und Einzelteilen. Hartmetallqualität für niedrige Schnittkräfte und saubere Oberflächen Unbeschichtetes Hartmetall ist die Basis dieser Sorte TH10, die als scharfe Universalsorte besonders für Nichteisenwerkstoffe entwickelt wurde. Das Material unterstützt niedrige Schnittkräfte und sorgt für saubere Oberflächen ohne zusätzliche Beschichtung, wodurch die Schneidkante besonders scharf bleibt. Für Anwender bedeutet das: geringerer Kraftbedarf, stabile Bearbeitungsbedingungen und reproduzierbare Oberflächengüten. Passgenaue Geometrie und sichere Halterfixierung Konstruktive Details wie der Freiwinkel von 5° und der Spanwinkel von 35° beeinflussen Schnittverhalten und Spanabfuhr entscheidend. Die Platte hat eine Plattendicke von 3,18 mm und eine Seitenlänge von 11 mm; das zylindrische Loch mit einseitiger Senkung (40°–60°) ermöglicht eine formstabile und wiederholgenaue Befestigung. Die Kompatibilität zum Halter richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke — dadurch wird eine zuverlässige Systemintegration erreicht. Zielgerichtete Anwendung und Auswahlhinweise Empfohlen für Außen- und Innendrehen, empfiehlt sich die Wahl des Spanbrechers J10 in Kombination mit der Sorte TH10 bei Nichteisenwerkstoffen oder bei Anwendungen, die niedrige Schnittkräfte erfordern. Werkstätten mit wechselnden Werkstoffen und mittleren Losgrößen finden hier eine wirtschaftliche Lösung mit guter Standzeit und einfacher Handhabung. Bei speziellen Werkstoffanforderungen hilft die Anpassung von Spanformer und Haltergeometrie, die Prozesssicherheit weiter zu erhöhen. Vertrauen Sie auf die technische Beratung und Verfügbarkeit der VBGT110304FR-J10 TH10 von Tungaloy – für Anwendungsfragen und Bestandsauskünfte kontaktieren Sie uns per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 6811516 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Fakten Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 mm Hersteller SKU: TUN6811516 Besonderheiten Material: Hartmetall Sorte: TH10 (Universalsorte für Nichteisenwerkstoffe) Schneidstofftyp: unbeschichtetes Hartmetall Spanbrecher: J10 (für saubere Spanabfuhr) Plattenform: rhombisch Befestigung: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Wendeplattenbezeichnung: VBGT110304FR-J10 FAQ Für welche Werkstoffe ist die VBGT110304FR-J10 TH10 am besten geeignet? Die VBGT110304FR-J10 TH10 von Tungaloy eignet sich primär für Nichteisenwerkstoffe und Anwendungen, die von niedrigen Schnittkräften und sauberen Oberflächen profitieren; bei Stahlanwendungen sollte eine andere Sorte gewählt werden. Wie beeinflusst der Freiwinkel von 5° die Bearbeitung? Ein Freiwinkel von 5° reduziert Reibung an der Werkzeugschulter, verbessert die Spanabfuhr und trägt zu einer stabilen Schnittkante bei, was besonders bei feinen Konturen und empfindlichen Werkstoffen vorteilhaft ist. Welche Vorteile bietet das unbeschichtete Hartmetall der Sorte TH10? Unbeschichtetes Hartmetall in der Sorte TH10 ermöglicht eine sehr scharfe Schneidkante mit niedrigen Schnittkräften und liefert deshalb saubere Oberflächen bei Nichteisenwerkstoffen; Beschichtungen sind hier nicht zwingend erforderlich. Wie stelle ich die Kompatibilität zur Halterung sicher? Die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab; prüfen Sie Halter- und Plattenkenndaten sowie die Serienbezeichnung ISO-Drehwendeschneidplatten vor dem Einsatz. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT 110304 TH10 Wendeplatten - Tungaloy
VBGT 110304 TH10 – ISO‑Drehwendeschneidplatte für Drehen | Tungaloy Die VBGT 110304 TH10 ist eine ISO‑genormte Wendeschneidplatte, konzipiert für präzise Außen‑ und Innendrehprozesse an Nichteisenwerkstoffen und Anwendungen mit niedrigen Schnittkräften. VBGT 110304 TH10 von Tungaloy Unbeschichtetes Hartmetall für geringe Schnittkräfte Für Nichteisenwerkstoffe und saubere Oberflächen Rhombische Form 11 mit Eckenradius 0,4 Mit zylindrischem Loch und einseitiger Senkung 40°–60° Hohe Schnittqualität durch unbeschichtetes Hartmetall Die Wendeschneidplatte setzt auf Hartmetall in unbeschichteter Ausführung, wodurch besonders geringe Schnittkräfte und eine saubere Spanabfuhr erzielt werden. Für Anwender bedeutet das: geringere Leistungsaufnahme der Maschine und bessere Oberflächen ohne zusätzliche Beschichtungsvarianten. Die TH10‑Sorte ist als scharfe Universalsorte ausgelegt und unterstützt eine breite Palette von Nichteisenwerkstoffen, sodass oft weniger Sorten bevorratet werden müssen. Kompakte Bauform vereinfacht Holder‑Kompatibilität Die rhombische Platte in Größe 11 mit einem Eckenradius von 0,4 und einer Plattendicke von 3,18 mm sorgt für stabile Positionierung im Halter. Durch den angegebenen Freiwinkel von 5° sowie die ISO‑genormte Form lässt sich die Platte in vielen Außenhaltern und Bohrstangen einsetzen. Diese mechanische Standardisierung reduziert Rüstzeiten und erleichtert die Lagerhaltung im Betrieb. Zielgerichtete Spanformung und Prozesssicherheit Der integrierte Spanbrecher J10 ist für eine kontrollierte Spanbildung ausgelegt und unterstützt saubere Spanformen bei leichten Zerspanungsbedingungen. In Kombination mit der scharfen TH10‑Sorte ergibt sich ein effizienter Materialabtrag bei gleichzeitig guter Oberflächenqualität, insbesondere beim Drehen von Aluminium‑Legierungen und ähnlichen Werkstoffen. Anwendung, Anwender und Montagehinweise Produktionsbetriebe und Lohnfertiger profitieren von der universellen Einsetzbarkeit der Platte im Drehen; auch Instandhalter finden schnelle Ersatzoptionen. Die Platte ist ISO‑genormt und wird mit zylindrischem Loch plus einseitiger Senkung (40°–60°) geliefert, was die Befestigung vereinfacht. Beim Einbau auf passende Unterlage und Klemmsatz achten, Schrauben kontrollieren und Torsionsmomente des Halters berücksichtigen, um wiederholgenaue Ergebnisse zu sichern. Empfehlen Sie die TH10‑Sorte von Tungaloy für präzise Dreharbeiten an Nichteisenwerkstoffen und kontaktieren Sie unsere Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6811513 Marke: Tungaloy Serie: ISO‑Drehwendeschneidplatten Bezeichnung: VBGT110304FL-J10 Hersteller SKU: TUN6811513 Fakten Eckenradius: 0,4 mm Plattendicke: 3,18 mm Plattengröße: 11 mm Winkel: 35° Freiwinkel: 5° Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Hartmetall Sorte: TH10 — scharfe Universalsorte Spanbrecher: J10 — kontrollierte Spanformung Plattenform: Rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Außen‑ und Innendrehen ISO: ISO‑genormte Ausführung FAQ Welche Werkstoffe bearbeitet die VBGT 110304 TH10 am besten? Die VBGT 110304 TH10 von Tungaloy ist speziell für Nichteisenwerkstoffe ausgelegt und liefert bei Aluminiumlegierungen und ähnlichen Materialien sehr gute Oberflächen und Spanbilder. Ist die Platte mit gängigen Außenhaltern kompatibel? Ja, die ISO‑Genorm der VBGT110304FL‑J10 sowie Form, Freiwinkel und Abmessungen ermöglichen die Montage in vielen standardisierten Außenhaltern und Bohrstangen. Welche Vorteile bietet die unbeschichtete Ausführung? Unbeschichtetes Hartmetall reduziert Reibung und Schnittkräfte; die TH10‑Sorte begünstigt saubere Oberflächen und eignet sich dort, wo niedrige Schnittkräfte gewünscht sind. Wofür steht der Spanbrecher J10? Der Spanbrecher J10 ist auf kontrollierte Spanbildung ausgelegt und sorgt für kurze, handhabbare Späne sowie konstante Bearbeitungsbedingungen bei leichten bis mittleren Zerspanungsparametern. Welche Abmessungen sind wichtig für die Auswahl der Platte? Wichtige Maße sind die Plattengröße 11, der Eckenradius 0,4 mm, die Plattendicke 3,18 mm sowie der Freiwinkel 5°; diese Werte bestimmen die Einsatzfähigkeit im gewählten Halter. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBGT110301 110301 NS9530 Wendeplatten - Tungaloy
VBGT 110301 NS9530 ISO-Drehwendeschneidplatte für Drehen — Tungaloy VBGT 110301 NS9530 ist eine ISO-genormte Drehwendeschneidplatte für präzise Schlichtaufgaben im Drehen und bietet eine scharfe Schneidkante für optimale Oberflächengüte Unbeschichtetes Cermet für feine Oberflächen Scharfe Schneidkante für Schlichtbearbeitung Rhombische Form 11 für Außen- und Innendrehen Mit Loch und Senkung 40°–60° für sichere Fixierung Eckenradius 0,1 mm für feine Konturen Präzision und Oberflächengüte bei Schlichtoperationen Die VBGT110301FN-JS NS9530 vereint einen unbeschichteten Cermet-Schneidstoff mit einem Hartmetall-Trägermaterial, um beim Schlichten von Stahl besonders niedrige Schnittkräfte und eine ausgezeichnete Oberflächengüte zu erzielen. Durch die scharfe Schneidkante und die gezielte Sortenwahl reduziert sich der Nacharbeitaufwand. Anwender profitieren von konstanter Bauteilqualität bei kontinuierlichem Schnitt und geringen Zustellungen. Geometrie und Werkzeugkompatibilität für zuverlässige Montage Die rhombische Plattenform in Größe 11 mit Eckenradius 0,1 mm und einem Freiwinkel von 5° ermöglicht präzise Konturen und stabile Spanabfuhr. Die Kompatibilität zum Halter richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke der Platte; der Systemaufbau umfasst die ISO-Drehwendeschneidplatten, den passenden Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben. Die vorhandene Lochform mit einseitiger Senkung gewährleistet kontrollierte Schraubenführung. Typische Einsatzbereiche und Anwendernutzen Für Feinbearbeitungen an Stahl ist die Sorte NS9530 als Schlichtsorte konzipiert: niedrige Schnittkräfte schonen Maschine und Werkzeug, während die scharfe Kante für herausragende Oberflächen sorgt. Die Platte eignet sich besonders für kontinuierliche Schnitte und kleine Zustellungen und ist damit ideal für Lohnfertiger, Werkzeugbau und präzise Serienfertigung, die konstante Ergebnisse und hohe Prozesssicherheit erwarten. Auswahl von Spanbrecher und Prozessparameter Der Spanbrecher JS ist auf kontinuierliche Schnittbedingungen ausgelegt und unterstützt eine gleichmäßige Spanformung. Für optimale Produktivität sollte die Kombination aus Sorte, Spanbrecher und Halter auf Werkstoff und Stabilität der Bearbeitung abgestimmt werden. Die wahl der Plattendicke von 3,18 mm und die Winkelauslegung (35°) tragen zur Stabilität der Schneidkante bei und erleichtern die Prozessplanung in der Fertigung. Kontaktieren Sie Metav Werkzeuge für die fachliche Beratung zur VBGT110301FN-JS NS9530 per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 und sichern Sie sich passgenaue Empfehlungen für Ihre Einsatzfälle FAQ Welche Werkstoffe sind mit der Platte geeignet? Die VBGT110301FN-JS NS9530 ist speziell für die Schlichtbearbeitung von Stahl ausgelegt. Durch die unbeschichtete Cermet-Sorte NS9530 werden niedrige Schnittkräfte und hohe Oberflächengüten erreicht. Für welche Bearbeitungsarten ist die Platte konzipiert? Hauptsächlich für Außen- und Innendrehen unter Schlichtbedingungen. Die Geometrie und der JS-Spanbrecher unterstützen kontinuierliche Schnitte und feine Zustellungen. Welche Rolle spielt der Eckenradius 0,1 mm? Der Eckenradius 0,1 mm ermöglicht feine Konturen und hochpräzise Kantenformung, was besonders bei sichtbaren Bauteilflächen und engen Toleranzen wichtig ist. Wie beeinflusst das Loch mit einseitiger Senkung die Montage? Das zylindrische Loch mit einseitiger Senkung (40°–60°) sorgt für sichere Schraubenführung und definierte Auflage in Verbindung mit passenden Unterlagen und Klemmsätzen. Was bedeutet die ISO-Bezeichnung für die Anwendung? Die ISO-Genormtheit garantiert Austauschbarkeit und Kompatibilität mit standardisierten Haltern; bei der Auswahl sind Form, Freiwinkel, Größe und Dicke zu beachten. Welche Vorteile bietet die Sorte NS9530 gegenüber beschichteten Sorten? Als unbeschichtete Schlichtsorte liefert NS9530 eine sehr scharfe Schneidkante für hohe Oberflächengüte bei geringen Schnittkräften; Beschichtete Sorten können hingegen bei höheren Schnittgeschwindigkeiten und abrasiven Bedingungen länger standfest sein. Gibt es Hinweise zur Lagerung der Platten? Platten trocken und sauber lagern, Beschädigungen an Schneidkante und Sitzflächen vermeiden und immer mit passenden Unterlagen sowie Schrauben montieren. Kann die Platte für instabile Aufspannungen verwendet werden? Bei reduzierter Stabilität der Aufspannung sollte die Sorten- und Spanbrecherwahl angepasst werden; NS9530 ist primär für stabile Schlichtbedingungen ausgelegt. Wie oft darf die Platte gewendet werden? Die Nutzungsdauer hängt von Bearbeitungsbedingungen ab; die VBGT110301FN-JS NS9530 ist für wiederholgenaue Schlichtbearbeitung optimiert, Standzeiten variieren mit Schnittdaten und Werkstoff. Ist die Platte für Härtebereiche geeignet? Die Platte ist für Schlichtbearbeitung an üblichen Stählen konzipiert; für gehärtete oder spezielle Legierungen sind andere Sorten oder Beschichtungen empfehlenswert. Produktmerkmale Artikelnummer: 6967232 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBGT110301FN-JS SKU: 6967232-Tungaloy Fakten Eckenradius: 0,1 mm Plattendicke: 3,18 mm Plattengröße: 11 Freiwinkel: 5° Winkel: 35° Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet Sorte: NS9530 (Schlichtsorte für Stahl) Spanbrecher: JS (für kontinuierlichen Schnitt) Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Modellserie: ISO-Drehwendeschneidplatten wpl_iso_2: 110301 Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 110302 AH6225 Wendeplatten - Tungaloy
VBMT 110302 AH6225 – VBMT110302-TSF für Drehen von Tungaloy Die VBMT 110302 AH6225 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen, entwickelt für mittlere Bearbeitungen an rostfreien Stählen und wechselnden Fertigungsbedingungen. VBMT110302-TSF von Tungaloy PVD-beschichtetes Hartmetall für lange Standzeit Optimiert für rostfreie Stähle und mittlere Schnitte Rhombische Platte mit 11 mm Größe und 0,2 mm Radius Zylindrisches Loch mit einseitiger Senkung 40°–60° Robuste Schneidkante für konstante Produktivität Die AH6225 steht für ein PVD-beschichtetes Hartmetall, das eine scharfe und zugleich stabile Schneidkante liefert. Diese Kombination verbessert die Standzeit und reduziert Stillstandzeiten durch selteneren Werkzeugwechsel. Die Sorte ist speziell abgestimmt auf rostfreie Stähle, sodass bei wechselnden Schnittbedingungen ein gleichbleibendes Zerspanungsverhalten erreicht wird. Systemkompatibilität und einfache Handhabung Als ISO-genormte Wendeschneidplatte passt die VBMT110302-TSF in gängige Haltersysteme, wobei Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke über die Kompatibilität entscheiden. Die Platte hat einen Freiwinkel von 5°, eine Plattendicke von 3,18 mm und eine Plattengröße von 11 mm, was die Auswahl des passenden Außenhalters vereinfacht und wiederholgenaue Aufspannungen ermöglicht. Zuverlässige Spanbildung dank TSF-Spanbrecher Der TSF-Spanbrecher wurde für stabile Spanbildung bei mittleren Schnittparametern konzipiert. Durch die optimierte Spanformer-Geometrie wird die Spanabfuhr verbessert, was die Bearbeitungssicherheit erhöht und Maschinenbelastung reduziert. Das Ergebnis ist eine reproduzierbare Oberflächengüte bei Außen- und Innendrehprozessen. Zielgruppe und empfohlene Einsatzfelder Die Wendeschneidplatte richtet sich an Lohnfertiger, Werkstätten und Fertigungsbetriebe, die häufig rostfreie Stähle bearbeiten und dabei Wert auf Prozesssicherheit legen. Sie eignet sich für Außen- und Innendrehen bei mittleren Schnitttiefen und wechselnden Bedingungen, wenn eine robuste Schneidkante und gute Spanabfuhr gefragt sind. Für präzise und wirtschaftliche Drehprozesse empfiehlt sich die VBMT 110302 AH6225 von Tungaloy; für technische Beratung und Verfügbarkeit erreichen Sie uns per eMail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 6947722 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT110302-TSF AH6225 Hersteller-SKU: TUN6947722 Daten Winkel: 35° Eckenradius: 0,2 mm Plattendicke: 3,18 mm Plattengröße: 11 mm Freiwinkel: 5° Radius: 0,2 mm Besonderheiten Material: Hartmetall Schneidstoff: PVD-beschichtetes Hartmetall Sorte: AH6225 — universelle Sorte für rostfreie Stähle Spanbrecher: TSF — optimiert für stabile Spanbildung Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Drehen Modellserie: ISO-Drehwendeschneidplatten Kompatibilität: Form, Freiwinkel, Toleranzklasse, Befestigung, Größe, Dicke FAQ Für welche Werkstoffe eignet sich die Platte besonders gut? Die VBMT110302-TSF mit der Sorte AH6225 ist besonders für rostfreie Stähle ausgelegt; die PVD-Beschichtung und die Sorteneigenschaften sorgen für stabile Schneidkanten bei wechselnden Bedingungen. Passt die Platte in alle ISO-Halter? Die Platte ist ISO-genormt; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Vor dem Einsatz sollte die Haltergeometrie geprüft werden. Welchen Nutzen bringt der TSF-Spanbrecher? Der TSF-Spanbrecher fördert kontrollierte Spanbildung und vereinfacht die Spanabfuhr, was die Prozesssicherheit erhöht und die Maschinenlaufzeit verbessert. Wie wirkt sich die PVD-Beschichtung aus? Die PVD-Beschichtung erhöht die Verschleißfestigkeit der Schneidkante, führt zu längerer Standzeit und reduziert die Gefahr von Kantenbruch bei mittleren Bearbeitungsbedingungen. Kann die Platte für Innen- und Außenbearbeitung verwendet werden? Ja, die Wendeschneidplatte ist für Außen- und Innendrehen ausgelegt; bei Innenbearbeitung auf geeignete Spann- und Zustellbedingungen achten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 110302 AH6225 Wendeplatten - Tungaloy
Take advantage of a universally applicable PVD-coated carbide grade and a proven 0.2 mm nose radius to combine reliable edge life with consistent surface finish in medium-duty stainless steel turning; order through Metav Werkzeuge or consult our specialists for application support. VBMT110302-PS AH6225 ISO turning insert (VBMT 110302) by Tungaloy A VBMT110302-PS AH6225 ISO rhombic turning insert engineered for external and internal turning of stainless steels, offering a balanced combination of a sharp, stable cutting edge and compatibility with ISO toolholders PVD-coated carbide grade AH6225 Universal for stainless steels and mixed conditions Rhombic VBMT 110302 geometry, 35° rake 0.2 mm nose radius, 5° clearance angle Consistent cutting performance for stainless-steel turning The PVD-coated carbide grade AH6225 is formulated to deliver a sharp yet durable cutting edge, making it a dependable choice for medium-duty operations where conditions vary. The coating improves wear resistance and heat tolerance, which translates into fewer tool changes and steadier batch throughput. As a result, production runs on stainless parts benefit from more consistent component surfaces and predictable tool life, supporting cycle-time stability and reduced process variance. Secure seating and straightforward clamping for fast changeovers Designed to the ISO insert family, the geometry and dimensions of this rhombic insert ensure clear guidance for holder compatibility: form, tolerance class, fastening and thickness determine the correct seat. The insert features a centre hole with a cylindrical bore and a one-sided countersink (40°–60°), enabling precise location and reliable screw clamping. With a thickness of 3.18 mm and an insert size of 11 mm, the component is straightforward to fit into standard ISO external holders, which minimises setup time and mechanical run-out risk. Geometry that balances finish and edge strength A 0.2 mm nose radius combined with a 5° clearance angle offers a compromise between edge robustness and achievable surface finish. The modest radius reduces cutting forces and vibration on medium-duty passes while still delivering acceptable part appearance, whereas the clearance angle helps prevent rubbing and built-up edge formation. The integrated PS chipbreaker keeps chips controlled under changing feed and cut depth conditions, which supports uninterrupted machining and easier swarf handling on the shop floor. Operational advantages: fewer variants, higher uptime Choosing a universal grade and a widely used ISO geometry reduces tool assortment complexity and simplifies inventory management. The insert’s balanced properties support frequent batch changes and mixed production schedules common in job shops and subcontract machining. If specific edge preferences or alternative chip control are required, the standard design still allows quick swapping within existing ISO toolholder systems, preserving machine uptime and enhancing overall process reliability. For consistent medium-duty stainless turning with the Tungaloy AH6225 grade, contact Metav Werkzeuge for application advice and rapid supply at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6903346 SKU: 6903346-Tungaloy Manufacturer SKU: TUN6903346 Material: Carbide (PVD-coated) Model series: ISO turning inserts Application: Turning Label: VBMT110302-PS AH6225 UID: 6903346-Tungaloy Facts Nose radius: 0.2 mm Clearance angle: 5° Insert size: 11 mm Thickness: 3.18 mm Main angle/rake: 35° Versions / Special features Rhombic shape (VBMT) With hole: cylindrical bore + one-sided countersink (40°–60°) Chipbreaker: PS Grade: AH6225, universal for stainless steels ISO designation: 110302 FAQ Is this insert suitable for machining stainless steels? Yes. The VBMT110302-PS AH6225 insert from Tungaloy is specifically designed as a universal grade for stainless steels, offering a combination of edge sharpness and stability for medium-duty turning. Can the insert be used for both external and internal turning? Yes. The ISO rhombic geometry and the PS chipbreaker make the insert suitable for external and internal turning applications, provided the selected holder matches the VBMT seat and tolerance. How does the centre hole and countersink affect clamping? The cylindrical bore with a one-sided countersink (40°–60°) ensures accurate axial location and secure screw clamping, improving repeatability when fitting the insert into compatible ISO holders. What benefits does the 0.2 mm nose radius deliver? A 0.2 mm nose radius balances surface finish and edge strength, reducing cutting forces and vibration while maintaining acceptable component appearance on medium-duty passes. Which chipbreaker is fitted and why is it useful? The insert is equipped with a PS chipbreaker; this chip control geometry helps form stable chips under varying cutting conditions and supports reliable swarf evacuation during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110302 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated carbide grade AH6235, a PS chipbreaker and ISO compatibility for reliable turning of stainless steels and interrupted cuts; order directly via Metav Werkzeuge or ask the consultants for application-specific advice. VBMT110302-PS AH6235 ISO turning insert (rhombic, 35°) — Tungaloy The VBMT110302-PS AH6235 is an ISO‑standard rhombic turning insert for external and internal turning, designed for robust performance in stainless steels and interrupted cutting conditions. ISO rhombic insert VBMT110302-PS PVD-coated carbide, AH6235 grade Optimised for stainless steel and interrupted cuts 0.2 mm corner radius for fine finishing Consistent cutting with a tough PVD‑coated carbide grade The combination of a PVD‑coated carbide substrate and the AH6235 grade gives a balanced mix of toughness and wear resistance that is especially useful when machining stainless steels or when facing interrupted cuts. The coating reduces friction and heat at the cutting edge, which helps to extend insert life and preserve edge integrity under unstable cutting conditions. For production environments where chip‑out or edge chipping is a recurrent issue, the tougher substrate reduces tool changes and supports a steadier process. Geometry and ISO compatibility for secure clamping and repeatability Built to ISO dimensions, the insert’s rhombic shape, 35° approach angle and 5° clearance angle ensure predictable cutting kinematics and compatibility with a wide range of holders. The insert thickness of 3.18 mm, plate size 11, and the cylindrical hole with a one‑sided countersink (40°–60°) provide secure mounting and repeatable seating in the toolholder. This standardisation simplifies tool inventory and enables fast replacement without readjustment, supporting higher machine uptime and consistent part quality. Chip control and productivity with the PS chipbreaker The PS chipbreaker is designed to produce controlled chip formation in demanding materials and intermittent cuts, improving swarf evacuation and reducing the risk of entanglement. A 0.2 mm corner radius contributes to a fine surface finish while offering edge strength where needed. Selecting the correct chipbreaker and the AH6235 grade according to workpiece material, depth of cut and machine stability will directly impact cycle times and overall cost per part, making the insert a practical choice for productive turning operations. Contact Metav Werkzeuge today for a tailored recommendation based on the AH6235 grade and chipbreaker PS, or request specific cutting data via info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6903517-Tungaloy Manufacturer SKU: TUN6903517 Manufacturer article number: 6903517 Model series: ISO turning inserts Designation: VBMT110302-PS AH6235 Facts Corner radius: 0.2 mm Clearance angle: 5° Plate thickness: 3.18 mm Plate size: 11 Approach angle: 35° Special features Material: PVD-coated carbide Chipbreaker: PS Shape: rhombic Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning Suitable for: stainless steels and interrupted cuts System components: ISO insert, external holder or boring bar, clamp set and replacement screws FAQ What materials is this insert best suited for? The insert is intended for stainless steels and similar alloys; the AH6235 grade and PS chipbreaker improve performance in interrupted cuts and materials prone to work hardening. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions and is compatible with holders that match the form, clearance angle, tolerance class, fastening method, size and thickness. What does the AH6235 grade offer compared with general grades? AH6235 is a tougher, PVD‑coated carbide grade formulated for reduced chipping in interrupted cuts and enhanced edge stability during stainless steel turning. How does the PS chipbreaker affect machining? The PS chipbreaker produces shorter, controlled chips to aid swarf evacuation and lower the risk of chip entanglement, which supports safer and more reliable turning operations. Which cutting data should be used as a starting point? Start with conservative cutting speeds and feeds appropriate for stainless steel and progressively increase while monitoring tool wear; consult Metav Werkzeuge for application‑specific parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com