VBMT 110304 AH725 Wendeplatten - Tungaloy
Combining the PVD-coated AH725 grade with the ISO VBMT110304 form and a 0.4 mm corner radius yields a process-secure solution for external and internal turning with reliable chip control and repeatable clamping. Order the VBMT110304-PSS AH725 insert directly via Metav Werkzeuge or ask our consultants if needed. VBMT110304 AH725 — ISO turning insert for external and internal turning — Tungaloy The VBMT110304-PSS AH725 is an ISO-standard rhombic turning insert designed for robust external and internal turning where process security and versatile material coverage are required. PVD-coated carbide grade AH725 Universal, chip-break resistant grade ISO-standard rhombic insert (110304) 0.4 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Reliable grade and coating for mixed-material production The combination of the AH725 grade and a PVD-coated carbide substrate delivers a balance of wear resistance and fracture toughness, designed for stable machining of steels and stainless steels. As a universal, chip-break resistant grade, this insert is particularly suited to production environments with varying workpiece materials or smaller tool geometries where consistent tool life and reduced breakouts are priorities. Compatibility with the cutting tool holder is governed by form, relief angle, tolerance class, clamping method, size and thickness, all of which ensure repeatable seating and predictable performance under cycle loads. Geometry tuned for surface quality and repeatability The rhombic plate shape together with a 0.4 mm corner radius and a 35° lead angle supports a fine surface finish while maintaining adequate edge strength for typical turning cuts. The insert's relief angle of 5° and plate thickness of 3.18 mm contribute to stable cutting behaviour and minimise chatter in modest overhang configurations. The integral PSS chipbreaker is engineered to control chip form across a range of feeds and depths, helping to avoid entanglement and to keep downstream processes running smoothly. The cylindrical hole with a single-sided countersink (40°–60°) offers secure clamping and accurate repeatability when mounted in compatible ISO-style holders. Application guidance and selection for dependable results Placed within the ISO turning insert system, this cutting grade performs best for both external and internal turning operations where process security is a primary requirement. For higher demands on edge life or when machining harder alloys, selection of the correct chipbreaker and an appropriate grade becomes decisive; the AH725 grade is a pragmatic choice when frequent material changes occur. For tailored advice on holder compatibility, recommended feeds and cutting speeds, or to confirm the suitability of the VBMT110304-PSS AH725 for a specific component, Metav Werkzeuge can provide technical consultation and swift supply options. The emphasis remains on maintaining stable cutting conditions and consistent part quality throughout the production run. For process-secure turning with the Tungaloy AH725 grade, contact Metav Werkzeuge for technical guidance and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6864993 Manufacturer SKU: TUN6864993 SKU: 6864993-Tungaloy Model series: ISO turning inserts Material: carbide Key dimensions Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 5° Lead angle: 35° Special features Grade: AH725 (PVD-coated) Chipbreaker: PSS Plate shape: rhombic Hole style: cylindrical hole with single-sided countersink (40°–60°) Application: turning (external and internal) Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ Which workpiece materials are suitable for this insert? The VBMT110304-PSS AH725 is specified for machining steel and stainless steels; the AH725 grade provides a universal, chip-break resistant solution suited to mixed-material production. Is this insert suitable for both external and internal turning? Yes — the ISO rhombic form and the PSS chipbreaker make this insert appropriate for external and internal turning applications within the ISO turning insert system. How does the 0.4 mm corner radius affect the result? A 0.4 mm corner radius gives a good balance between surface finish and edge strength; it supports fine finishing passes while maintaining sufficient robustness for standard turning cuts. What ensures repeatable clamping of the insert? Repeatability is supported by the cylindrical hole with a single-sided countersink (40°–60°) and adherence to ISO form, size and thickness standards when mounted with a matching holder and clamping set. For which cutting conditions is the PSS chipbreaker optimised? The PSS chipbreaker controls chip form effectively across varying feeds and depths, improving chip evacuation and enhancing process stability when machining steels and stainless steels with this Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110304 AH725 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade and a compact 0.4 mm corner radius provides consistent chip control and long tool life under variable cutting conditions; benefit from the ISO format for simple holder compatibility and steady process reliability. Order the insert directly via Metav Werkzeuge or contact the consultants for selection support. VBMT110304-PS AH725 ISO turning insert for steel and stainless steels by Tungaloy, 35° geometry The VBMT110304-PS AH725 is an ISO rhombic indexable insert designed for external and internal turning, offering a universal, fracture-resistant grade suited to mixed-material production and operations requiring high process security. PVD-coated carbide AH725 for steel and stainless ISO rhombic insert VBMT110304-PS, 35° angle 0.4 mm corner radius for accurate profiling Cylindrical hole with one-sided countersink Stable cutting and predictable tool life for mixed production The combination of a PVD-coated carbide substrate and the AH725 grade aims to deliver process reliability in environments where material types vary. The coating reduces built-up edge and improves wear resistance, which translates into longer effective tool life and fewer interruptions for index changes. For production settings where small inserts are preferred, the fracture-resistant composition reduces the risk of unexpected breakouts while maintaining consistent surface quality on both steel and stainless steels. Geometry engineered for secure seating and accurate profiles A rhombic plate form with a main geometry angle of 35° and a relief of 5° gives controlled engagement and predictable cutting forces. The 0.4 mm corner radius supports fine profiling and improved strength at the insert tip, while the plate thickness of 3.18 mm provides the body stiffness needed for repeatable results. These dimensional choices simplify set-up, improve repeatability across batches and reduce vibration, which in turn enhances surface finish and reduces rework. Chip control and clamping details that support productivity The PS chipbreaker is tuned for reliable chip formation in turning operations, encouraging short, controllable chips that evacuate cleanly in both external and internal machining. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to ensure secure clamping in compatible holders; this mechanical interface minimises micro-movement under load and supports higher feeds where process stability is required. Compatibility with standard ISO holders is determined by insert form, relief angle, tolerance class, fixing method, size and thickness. Material range and recommended applications Designed primarily for machining steel and stainless steels, this indexable insert is especially suitable where workpiece materials change frequently or where high process security is a priority. The universal nature of the grade makes it a practical choice for batch production, jobbing shops and toolrooms that need one reliable insert for a variety of turning tasks. Typical uses include finishing and medium-duty semi-finishing in both external and internal turning where consistent edge behaviour and chip control are essential. For specification advice or to acquire the VBMT110304-PS AH725 for precise turning applications, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930; the team will assist with selection and order processing Technical Data Article number: 6856686 Manufacturer SKU: TUN6856686 SKU: 6856686-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: VBMT110304-PS AH725 Facts Insert size: 11 mm Plate thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 5° Main angle: 35° Materials & Features Material: carbide Coating / grade: PVD-coated, AH725 Chipbreaker: PS Shape: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Typical application: turning (external and internal) Compatibility: ISO insert matching by form, relief, tolerance class, fixing, size and thickness FAQ What materials is this insert suitable for? The VBMT110304-PS AH725 insert is intended primarily for machining steel and stainless steels; the AH725 grade provides universal, fracture-resistant behaviour across these materials. What does the PS chipbreaker do in daily use? The PS chipbreaker on this turning insert promotes short, controlled chips during turning operations, improving evacuation and reducing the risk of chip entanglement in both external and internal machining. How does the insert mount in standard holders? The rhombic geometry, cylindrical hole and one-sided countersink ensure reliable clamping in ISO-compatible holders when matched by form, clearance angle, tolerance class, fixing method, size and thickness. Is this insert suitable for finishing and semi-finishing? Yes, the combination of a 0.4 mm corner radius and the AH725 grade makes the insert well suited to finishing and medium semi-finishing tasks where consistent edge stability and surface quality are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110304 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of robust PVD-coated AH8015 carbide, precise 35° rhombic geometry and a secure cylindrical hole with single-sided countersink for consistent clamping and reliable turning results; the balanced design supports machining of heat-resistant alloys while maintaining edge stability and tool life. Order the VBMT110304-TSF AH8015 directly via Metav Werkzeuge or ask our consultants if needed. VBMT110304-TSF AH8015 – ISO indexable turning insert (35° rhombic) by Tungaloy VBMT110304-TSF AH8015 is an ISO-standard indexable insert engineered for precision turning applications, especially suited to machining heat-resistant alloys and general turning operations. ISO indexable insert, rhombic 35° geometry PVD-coated carbide AH8015 for heat-resistant alloys 0.4 mm corner radius for versatile turning Cylindrical hole with 40°–60° countersink Consistent edge stability and wear resistance for heat-resistant alloys The combination of PVD-coated surface and the AH8015 grade carbide provides a balanced mix of wear resistance and edge stability, specifically optimised for turning heat-resistant alloys. The coating reduces adhesive wear and improves thermal endurance, while the substrate grade maintains a reliable cutting edge during interrupted cuts. This results in fewer insert changes and more predictable tool cycles, supporting sustained production runs and lowering per-part tooling cost without sacrificing surface quality. Secure mounting and versatile geometry for predictable performance Designed to the ISO geometry VBMT110304, the 35° rhombic angle delivers stable cutting for both external and internal turning; the modest 0.4 mm corner radius allows a compromise between finishing capability and light roughing. The insert’s cylindrical hole with single-sided countersink (40°–60°) ensures positive clamping in most ISO-compatible holders and boring bars, while the 3.18 mm plate thickness and 11 mm inscribed circle provide mechanical rigidity. Together these features reduce vibration and improve repeatability across different holder systems. Process reliability, chip control and recommended applications Equipped with the TSF chipbreaker, this insert is intended for general-purpose turning where chip formation must be controlled across varying cutting conditions. The chipbreaker and grade pairing support stable swarf behaviour in many heat-resistant and alloyed materials, which eases swarf handling and reduces cycle interruptions. Typical applications include both external and internal turning where a balance of tool life and surface finish is required. For best results, match holder rigidity and cutting parameters to the material and select the appropriate chipbreaker and coolant strategy for the application. Contact Metav Werkzeuge for tailored application advice on the Tungaloy VBMT110304-TSF AH8015 and to verify the optimal holder and chipbreaker combination for your turning process Technical data Article number: 6825776 Manufacturer SKU: TUN6825776 Stock SKU: 6825776-Tungaloy Model series: ISO indexable turning inserts Facts ISO designation: 110304 Inscribed circle: 11 mm Plate thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 5° Main angle: 35° Countersink angle: 40°–60° Special features Grade/coating: AH8015, PVD-coated carbide Chipbreaker: TSF Plate form: rhombic Hole style: cylindrical hole with single-sided countersink Material: carbide Application: turning FAQ What materials is this insert suitable for? This insert in grade AH8015 is formulated for machining heat-resistant alloys and is suitable for a broad range of alloyed materials when paired with the correct chipbreaker and cutting data. How does the TSF chipbreaker influence performance? The TSF chipbreaker on this insert promotes controlled chip formation for general turning, supporting consistent swarf behaviour and reducing load peaks that can shorten insert life. Is this insert compatible with standard ISO holders? Yes; the ISO geometry (VBMT110304) and the cylindrical hole with single-sided countersink are designed to fit ISO-compatible external holders and boring bars that accept VBMT-style inserts. What are the key dimensional features to check for holder compatibility? Check the 11 mm inscribed circle, 3.18 mm thickness and the cylindrical hole with 40°–60° countersink to ensure correct seating and clamping in the chosen holder. Can this insert be used for both roughing and finishing? With a 0.4 mm corner radius, the insert offers a compromise suitable for many mixed operations; for heavy roughing or ultra-fine finishing, a different radius or grade may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110304 AH8015 Wendeplatten - Tungaloy
Take advantage of a balanced combination of PVD-coated carbide longevity and a 0.4 mm corner radius for stable, repeatable turning of heat-resistant alloys; the ISO compatibility and standardised geometry enable straightforward integration into existing tooling systems. Order directly via Metav Werkzeuge or request application advice from our consultants. VBMT 110304 AH8015 — ISO turning insert, PVD-coated carbide, 35° geometry (Tungaloy) The VBMT110304-PS AH8015 is an ISO-standard rhombic turning insert designed for external and internal turning, optimised for machining heat‑resistant alloys and similar demanding materials. PVD-coated carbide grade AH8015 0.4 mm corner radius for stable cuts 35° rhombic geometry with 5° relief Cylindrical hole and single-sided countersink Consistent performance for heat-resistant alloys The insert uses a PVD-coated carbide grade, AH8015, engineered to balance wear resistance with edge stability for extended service life in demanding environments. This composition is particularly effective when machining heat‑resistant alloys: the coating reduces flank wear while the substrate sustains cutting-edge integrity under intermittent thermal loads. As a result, tool life is extended and workpiece tolerances remain consistent over longer batch runs, supporting predictable cycle times and lower per‑part tooling costs. Geometry that improves stability and surface quality A 35° rhombic geometry together with a 0.4 mm corner radius and a 5° relief angle reduces cutting forces and vibration during light to medium turning operations. The combination yields a more uniform chip formation and a stable cutting edge, which helps to achieve repeatable surface finishes and diminishes the need for rework. The PS chipbreaker is matched to the grade and intended applications to aid chip control and evacuation, improving productivity and machine uptime. Designed for straightforward integration and flexible use Conforming to ISO plate standards, the insert is compatible with a wide range of external holders and boring bars when matched by shape, relief angle, tolerance class, fastening and thickness. The standard thickness of 3.18 mm and inscribed size of 11 mm permit direct replacement in many common tool systems; the central cylindrical hole with a single‑sided countersink (40°–60°) secures reliable clamping and repeatability. This makes the component a practical choice for batch production and mixed‑material workshops that require a balance of performance and availability. Contact Metav Werkzeuge for tailored application advice on the Tungaloy AH8015 turning inserts or to arrange prompt delivery from stock and compatibility checks with existing holders Technical Data Manufacturer article number: 6775798 SKU: 6775798-Tungaloy Manufacturer SKU: TUN6775798 Label: VBMT110304-PS AH8015 Numbers / Core technical data Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 5° Geometry angle: 35° Designs / Special features Rhombic insert, ISO standard PVD-coated carbide, grade AH8015 PS chipbreaker Cylindrical hole with single-sided countersink (40°–60°) Intended for external and internal turning Compatible with standard ISO holders and clamping sets FAQ What materials is the VBMT110304-PS AH8015 best suited for? The VBMT110304-PS AH8015 from Tungaloy is optimised for heat‑resistant alloys and similar hard‑to‑machine materials, offering a balance of wear resistance and edge stability for reliable performance. Which holders are compatible with this insert? Compatibility depends on matching the ISO rhombic form, relief angle, size and thickness; the VBMT110304-PS AH8015 is designed for standard ISO turning holders and boring bars when these parameters and clamping features correspond. How does the PS chipbreaker affect machining results? The PS chipbreaker, combined with the AH8015 grade, promotes controlled chip formation and evacuation, reducing the risk of tangling and improving surface finish while supporting higher uninterrupted cutting periods. Can this insert be used for both external and internal turning? Yes, the insert is suited to both external and internal turning operations when installed in appropriately matched holders; its geometry and coating are intended to provide stable cutting across these applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110304 AH8015 Wendeplatten - Tungaloy
Combining a PVD‑coated carbide grade AH8015 with a TM chipbreaker and a 0.4 mm corner radius offers a balanced mix of wear resistance and edge stability for dependable turning of heat‑resistant alloys. The ISO rhombic form with a 5° clearance and a 3.18 mm plate thickness ensures repeatable seating and compatibility with standard holders. Order the VBMT110304‑TM AH8015 directly via Metav Werkzeuge or ask our consultants if needed. VBMT110304-TM AH8015 ISO turning insert — PVD-coated carbide for turning — Tungaloy A VBMT110304‑TM AH8015 is an ISO rhombic insert engineered for external and internal turning, optimised for machining heat‑resistant alloys. PVD‑coated carbide grade AH8015 Rhombic ISO form with 5° clearance TM chipbreaker for controlled chips 0.4 mm corner radius for fine finishing Consistent cutting performance where heat resistance matters The combination of a PVD‑coated surface and the AH8015 grade provides a deliberate balance between wear resistance and cutting‑edge stability. This makes the insert particularly suitable for the general machining of heat‑resistant alloys, where temperatures at the cutting zone are elevated. The TM chipbreaker is designed to direct chips reliably under a range of cutting conditions, reducing chip entanglement and improving cycle stability. As a result, process reliability is enhanced and tool change intervals become more predictable, supporting efficient production runs. Secure seating and straightforward holder selection Adherence to ISO geometry ensures the insert seats predictably in compatible holders. Key mechanical parameters — rhombic form, 5° clearance, tolerance class, fastening method, size (11 mm) and plate thickness (3.18 mm) — determine compatibility with an external holder or boring bar. For shops standardising on ISO inserts, this variant simplifies tool‑management and minimises setup time. Where stability is limited, selecting the correct chipbreaker and ensuring correct clamping will preserve the insert’s edge life and maintain repeatable results. Better surface finish with controlled engagement The 0.4 mm corner radius supports finer surface quality and controlled material removal during finishing passes. A smaller radius reduces cutting forces for light passes and helps to avoid chatter when machine and setup conditions are optimised. In roughing operations, the TM chipbreaker promotes predictable chip segmentation; in finishing operations the modest corner radius contributes to a refined machined profile. For demanding components, combining this insert with a suitably rigid holder and correct feeds produces consistent geometry and improved component finish. System approach for reliable production workflows This insert is intended to be used as part of a system: ISO‑rated insert, matching external holder or boring bar, shim/clamping set and the required fixing screws. The insert’s hole with a cylindrical bore and a single‑sided countersink (40°–60°) permits standard clamping methods and secure fastening. Keeping spares of replacement screws and underplates reduces downtime. Stocking ISO inserts such as this one allows fast changeovers, predictable performance and simpler tool inventory management for workshops processing heat‑resistant alloys. For process advice or stock availability of this Tungaloy PVD‑coated turning insert, contact Metav Werkzeuge for tailored recommendations and immediate assistance: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Designation: VBMT110304‑TM AH8015 Article number: 6825800 Manufacturer SKU: TUN6825800 SKU: 6825800‑Tungaloy Manufacturer: Tungaloy Application: Turning Model series: ISO turning inserts Facts Corner radius: 0.4 mm Insert size: 11 mm Plate thickness: 3.18 mm Clearance angle: 5° Angle: 35° Countersink angle: 40°–60° Special features Material: carbide Coating: PVD Grade: AH8015 — for heat‑resistant alloys Chipbreaker: TM Shape: rhombic (VBMT geometry) Hole: cylindrical with single‑sided countersink Typical use: external and internal turning System components: matching holder/boring bar, shim/clamping set, spare screws FAQ Which materials is this insert best suited for? The VBMT110304‑TM AH8015 is primarily specified for the general machining of heat‑resistant alloys; the AH8015 grade and PVD coating balance wear resistance with edge stability for such materials. How is holder compatibility determined? Compatibility depends on the insert’s rhombic form, 5° clearance, tolerance class, method of fastening, size (11 mm) and plate thickness (3.18 mm); the insert seats in standard ISO holders designed for VBMT geometry. What does the TM chipbreaker provide? The TM chipbreaker on this insert controls chip formation and evacuation, improving process stability and reducing the risk of chip interference during continuous turning cycles. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius supports finer surface finishes and lower cutting forces in finishing passes while still allowing acceptable robustness for light to moderate roughing. What are the plate fastening details? The insert features a cylindrical hole with a single‑sided countersink (40°–60°) for standard clamping; ensure the holder’s screw and underplate match the insert’s seating and clamping geometry. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VBMT 110304 AT9530 Wendeplatten - Tungaloy
Combine the fine‑finishing capability of the AT9530 cermet grade with a 0.4 mm nose radius and the PS chipbreaker to achieve consistent surface quality and predictable tool life; order these ISO turning inserts directly via Metav Werkzeuge or consult our specialists for application guidance. VBMT 110304 AT9530 ISO turning insert for turning — 0.4 mm radius, PS chipbreaker — Tungaloy The VBMT110304-PS AT9530 is an ISO‑standard rhombic turning insert designed for finishing and light turning of steel, optimised to deliver improved surface quality and even wear in demanding production runs. Cermet grade AT9530 for superior finish 0.4 mm nose radius for tight tolerances PS chipbreaker for controlled chips ISO rhombic plate with cylindrical hole Better surface quality with stable wear characteristics The combination of a coated cermet grade and a small 0.4 mm nose radius provides a clear advantage for finishing operations where consistent surface finish and reduced rework are priorities. The AT9530 composition is optimised for light and finishing cuts on steel, offering a balance between cutting edge stability and predictable flank wear. In practice, this means fewer interruptions for edge dressing and a more uniform part appearance across batches, supporting higher first‑pass yield and reduced downstream polishing. Seamless ISO integration for reduced setup time Conformity to ISO dimensions and the rhombic plate geometry ensure straightforward integration into established toolholders and boring bars. Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic shape, 11 mm plate size and 3.18 mm thickness allow secure seating and repeatable positioning. The cylindrical hole with a single‑sided countersink (40°–60°) supports positive clamping and reliable repeatability, which shortens setup time and minimises vibration-related rejects in routine turning operations. Predictable chips and longer productive cycles The PS chipbreaker is tuned for controlled chip formation during finishing passes, reducing the risk of entangling or long curled chips while promoting efficient evacuation. As a coated cermet, the insert delivers good wear resistance and consistent edge condition, contributing to extended tool life in light turning applications. The result is a stable machining process with fewer unplanned tool changes, improved productivity and consistent part quality — qualities that are particularly valuable in batch production and precision components. For precision finishing with Tungaloy indexable inserts, contact Metav Werkzeuge for technical selection and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6748563 SKU: 6748563-Tungaloy Manufacturer SKU: TUN6748563 Model series: ISO turning indexable inserts Designation: VBMT110304-PS AT9530 Material type: coated cermet Numbers / Core technical data Nose radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 mm Clearance angle: 5° Approach angle: 35° Special features Grade/coating: AT9530 Chipbreaker: PS Plate shape: rhombic Hole: cylindrical hole with single‑sided countersink (40°–60°) Application: finishing and light turning of steel Compatible with ISO turning holders FAQ What materials is this insert best suited for? The VBMT110304-PS AT9530 is optimised for finishing and light turning of steel; the AT9530 cermet grade focuses on surface quality and even wear during such operations. How does the plate attach to a holder? Clamping is supported via the cylindrical hole with a single‑sided countersink; compatibility with a given holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. What nose radius and angles does the insert offer? This insert features a 0.4 mm nose radius with a 5° clearance angle and a 35° approach angle, suitable for tight tolerance finishing cuts. Which chip behaviour can be expected with the PS chipbreaker? The PS chipbreaker provides controlled short or segmented chips in finishing conditions, improving evacuation and reducing the chance of chip entanglement. Is the cutting material a cermet or carbide? The cutting material is a coated cermet in grade AT9530, engineered for good surface finish and stable wear in light turning of steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110304 GT9530 Wendeplatten - Tungaloy
Combining a coated cermet grade for superior surface finish, a 0.4 mm corner radius and a stable 5° relief angle yields reliable finishing performance and extended tool life; order the VBMT110304-PS GT9530 through Metav Werkzeuge or consult the technical team for application advice. VBMT110304-PS GT9530 — ISO turning insert for finishing and light universal turning by Tungaloy VBMT110304-PS GT9530 is an ISO-format turning insert designed for finishing and light general-purpose turning, offering a coated cermet grade optimised for steel machining. Coated cermet grade GT9530 0.4 mm corner radius for fine finishes ISO rhombic form, 11 mm size Cylindrical hole + single-sided countersink Deliver consistent surface quality with a coated cermet grade The coated cermet GT9530 is engineered for wear resistance and improved finish in stable turning operations. Its microstructure and coating reduce built-up edge formation, which supports a more consistent surface appearance on steel components. The 0.4 mm corner radius is calibrated to produce fine external profiles while limiting burr formation; this provides a balance between edge strength and surface aesthetics, making the insert particularly suitable for applications where visual quality and dimensional consistency matter. Achieve longer tool life and process stability A combination of the coated cermet composition and the insert geometry leads to predictable wear behaviour and extended service intervals under stable cutting conditions. The 5° relief angle and 35° wedge angle help maintain a secure cutting edge during light finishing passes, reducing vibration sensitivity when mounted correctly. Choosing this insert and the appropriate chipbreaker ensures efficient material removal with fewer interruptions, which improves productivity and reduces downtime for regrinding or replacement. Easy integration into ISO turning systems for reliable clamping The ISO designation and the rhombic form guarantee compatibility with standard external holders and boring bars when matched for form, relief angle, tolerance class, fastening method, size and thickness. The insert’s cylindrical hole with a single-sided countersink (40°–60°) enables standard clamping solutions and secure seat location. Specifying the correct holder and clamping set ensures the geometrical stability needed to exploit the insert’s benefits — consistent chip control and reproducible part quality. For dependable finishing on steel with the GT9530 grade, contact Metav Werkzeuge for sourcing and application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6998396 SKU: 6998396-Tungaloy Type designation: VBMT110304-PS GT9530 Shape: rhombic Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 5° Wedge angle: 35° Hole style: cylindrical hole + single-sided countersink (40°–60°) Numerical data Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 mm Relief angle: 5° Wedge angle: 35° Countersink angle range: 40°–60° Special features Grade/coating: GT9530 (coated cermet) Substrate: cemented carbide Application: Turning — finishing to light universal for steel Compatible with ISO turning insert systems; holder compatibility depends on form, relief angle, tolerance class, fastening, size and thickness FAQ What machining tasks is this insert suited for? The VBMT110304-PS GT9530 is intended primarily for finishing and light general-purpose turning on steel, providing improved surface quality and longer tool life under stable cutting conditions. How does the GT9530 coating improve performance? The GT9530 coated cermet combines wear resistance with reduced built-up edge tendency, which enhances surface finish and extends tool life in finishing operations. Which holders are compatible with this insert? Compatibility requires a matching ISO external holder or boring bar sized for the rhombic form, 11 mm plate size, 3.18 mm thickness, the specified relief angle and appropriate clamping and tolerance class. What is the significance of the 0.4 mm corner radius? A 0.4 mm corner radius delivers a fine surface finish while maintaining adequate edge strength for finishing passes, reducing the risk of burrs on turned components. Does the insert come with a standard hole and countersink? Yes — the insert features a cylindrical hole with a single-sided countersink (40°–60°) for standard clamping solutions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110304 GT9530 Wendeplatten - Tungaloy
VBMT110304-PF GT9530 VBMT ISO-Drehwendeschneidplatte für Drehen, Tungaloy Die VBMT110304-PF GT9530 ist eine ISO-genormte Wendeschneidplatte für präzises Außen- und Innendrehen und wurde von Tungaloy für stabile Schlichtprozesse an Stahl entwickelt ISO-genormt, hohe Halterkompatibilität Beschichtetes Cermet für lange Standzeit Schlichtsorte PF für exzellente Oberflächen Eckenradius 0,4 mm für präzise Konturen Zylindrisches Loch mit Senkung 40°–60° Wirtschaftliche Schlichtbearbeitung mit konstanter Oberflächengüte Die GT9530-Sorte kombiniert einen beschichteten Cermet-Schneidstoff mit einem robusten Trägermaterial aus Hartmetall, um bei stabilen Prozessbedingungen längere Standzeit und gleichbleibend hohe Oberflächengüte zu liefern. Durch die Kombination aus verschleißfestem Schneidstoff und feinem Spanbrecher reduziert sich der Bedarf an Nacharbeit, was die Prozesskosten senkt und die Teilequalität erhöht. Anwender profitieren von weniger Stillstand und planbareren Werkzeugwechselintervallen. Sichere Halterkompatibilität dank ISO-Norm und durchdachter Geometrie Die ISO-Genormung gewährleistet die Kompatibilität mit gängigen Haltersystemen, wobei Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke die Passung bestimmen. Das zylindrische Loch mit einseitiger Senkung (40°–60°) erleichtert die sichere Befestigung und sorgt für wiederholgenaue Positionierung. Dadurch lassen sich Schnittparameter zuverlässiger auslegen und die Prozesssicherheit in Serienläufen erhöhen. Optimierte Auslegung für Stahl: Empfehlung und Materialklärung Für Bearbeitungen an Stahl empfiehlt sich diese Sorte bei Schlicht- bis leichter Universalbearbeitung, wenn gute Oberflächen und längere Standzeiten gewünscht sind. Der Begriff Cermet bezeichnet eine keramisch-metallische Kombination, die Härte und Temperaturbeständigkeit der Keramik mit Zähigkeit des Metalls verbindet; die Beschichtung verbessert Verschleißschutz und Reibungsverhalten. So entsteht eine praxisnahe Lösung für hochwertige Oberflächen bei stabilem Schnitt. Stabile Spanbildung und Anwendungsnutzen für die Fertigung Der Spanbrecher PF ist auf feine Spanteilung und ruhigen Spanfluss ausgelegt, was Vibrationen mindert und das Maschinenverhalten stabilisiert. In Verbindung mit einer passenden Halterauslegung sorgt diese Geometrie für reproduzierbare Bearbeitungsergebnisse und reduziert Ausschuss. Produktionsbetriebe gewinnen damit Planbarkeit und Effizienz, da weniger ungeplante Werkzeugwechsel und Nacharbeit anfallen. Empfehlung: Für präzise Schlichtoperationen an Stahl empfiehlt sich die GT9530-Beschichtung von Tungaloy; kontaktieren Sie Metav Werkzeuge für fachliche Beratung und schnelle Lieferung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Bezeichnung: VBMT110304-PF Hersteller Artikelnummer: 6998383 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten SKU Hersteller: TUN6998383 Fakten Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 mm Radius: 0,4 mm Besonderheiten Material: Hartmetall Schneidstofftyp: beschichtetes Cermet Sorte: GT9530 Spanbrecher: PF (feiner Spanbrecher, geeignet für Schlichtbearbeitung) Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Für welche Werkstoffe ist diese Wendeschneidplatte geeignet? Die GT9530-Sorte ist speziell für die Bearbeitung von Stahl ausgelegt und bietet bei Schlicht- bis leichter Universalbearbeitung eine gute Oberflächengüte und verlängerte Standzeit. Die Kombination aus Hartmetallträger und beschichtetem Cermet sorgt für Verschleißschutz und Temperaturstabilität. Ist die Platte mit Standardhaltern kompatibel? Ja, als ISO-genormte Drehwendeschneidplatte ist die Platte für die Verwendung in gängigen Haltersystemen ausgelegt; die tatsächliche Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Was bedeutet der Spanbrecher PF im praktischen Einsatz? Der Spanbrecher PF ist auf feine Spanteilung ausgelegt und verbessert die Oberflächengüte bei Schlichtprozessen. PF sorgt für ruhigen Spanfluss, reduziert Vibrationen und unterstützt reproduzierbare Bearbeitungsergebnisse. Welche Vorteile bietet der beschichtete Cermet-Schneidstoff im Vergleich zu unbeschichteten Lösungen? Beschichtete Cermet-Werkstoffe verbinden hohe Härte mit verbesserter Reibungscharakteristik; die Beschichtung erhöht den Verschleißschutz, stabilisiert die Schneidkante und verlängert unter stabilen Prozessbedingungen die Werkzeugstandzeit. Wie wichtig ist die Plattenbefestigung für die Leistung? Eine korrekte Befestigung über das zylindrische Loch mit Senkung und die passende Unterlage sind entscheidend für wiederholgenaue Positionierung und sichere Kraftübertragung; nur so lassen sich die versprochenen Oberflächen und Standzeiten erzielen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 110304 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet durability and ISO-standard compatibility for reliable finishing and extended tool life; order original Tungaloy inserts through Metav Werkzeuge or request application advice from our consultants. VBMT 110304 GT9530 turning insert – Tungaloy carbide finishing insert with PSF chipbreaker VBMT110304-PSF GT9530 is a rhombic ISO turning insert designed for finishing and light general machining of steel, providing improved surface quality and extended tool life under stable conditions Coated cermet grade GT9530 for steel finishes ISO VBMT 110304 rhombic insert 5° relief angle for fine finishing PSF chipbreaker for stable chip control Consistent finishing performance with a wear-resistant cermet The GT9530 grade is a coated cermet optimised for finishing to light general-purpose turning of steel, delivering a finer edge and improved wear resistance compared with conventional carbide grades. Cermet combines ceramic hardness with metallic toughness; the coating reduces flank wear and adhesion, which translates into consistent surface finish and longer edge life when machining under steady, vibration-minimised setups. This makes the insert particularly suitable where component tolerances and visual appearance are important. Proven ISO compatibility for flexible tool-system integration As an ISO-standard insert, the geometry and dimensions follow established norms that determine compatibility with a wide range of holders and boring bars. Fit is governed by insert shape, relief angle, tolerance class, fastening method, size and thickness. That standardisation simplifies tool procurement and replacement planning, and allows selection of the correct holder or shim without uncertainty. The PSF chipbreaker and central hole style further assist in secure clamping and repeatable seat location. Process benefits: chip control, edge strength and productivity The combination of PSF chipbreakers and a 0.4 mm corner radius gives stable chip formation and an edge geometry that balances surface integrity with robustness. The 5° relief angle and 35° insert angle support fine finishing passes with low workpiece distortion, while the coated cermet chemistry helps maintain a sharp cutting edge across multiple components. The result is reduced rework, fewer tool changes and improved throughput in medium-to-high-volume turning operations. System considerations and recommended applications The insert forms part of a system: ISO insert, suitable external or internal holder, shim/clamp set and replacement screws for secure mounting. The rhombic form and central hole with cylindrical bore plus one-sided countersink (40°–60°) facilitate reliable seating and torque transfer. Use this grade for stable finishing of steels where excellent surface quality and predictable tool life take priority; for more variable or interrupted cuts, select holders and clamping that reduce vibration to preserve the insert’s benefits. Consult Metav Werkzeuge for tailored holder recommendations and to order original Tungaloy VBMT110304-PSF GT9530 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998388 Manufacturer SKU: TUN6998388 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Numbers / Core Technical Data Insert designation: VBMT110304-PSF ISO code: 110304 Corner radius: 0.4 mm Thickness: 3.18 mm Size: 11 mm Relief angle: 5° Insert angle: 35° Special features / Versions Coating / grade: GT9530 Chipbreaker: PSF Shape: rhombic Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Typical application: Turning (external and internal) System components: ISO insert, holder or boring bar, shim/clamp set and spare screws FAQ What materials is this insert suitable for? This Tungaloy VBMT110304-PSF GT9530 insert is developed primarily for machining steel, offering good surface finish and wear resistance in finishing and light general turning. How does the GT9530 cermet grade affect tool life? The GT9530 coated cermet provides enhanced wear resistance and edge retention compared with standard carbides, which typically results in longer tool life during stable finishing operations. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s form, relief angle, tolerance class, fastening method, size and thickness; use holders specified for VBMT 110304 geometry to ensure correct seating and clamping. What is the function of the PSF chipbreaker? The PSF chipbreaker produces controlled, short chips in finishing conditions, improving chip evacuation and reducing surface imperfections during stable cuts. Can this insert be used for internal turning? Yes, the rhombic geometry and secure clamping make the insert suitable for both external and internal turning, provided the holder offers adequate rigidity and clearance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110304 NS9530 TM Wendeplatten - Tungaloy
Combining the sharp cutting edge of the uncoated cermet grade NS9530 with ISO compatibility and a compact 11 mm form, this insert delivers low cutting forces and an outstanding surface finish for finishing turns; its TM chipbreaker and 0.4 mm corner radius suit continuous cuts and small depths. Order the VBMT110304-TM NS9530 directly via Metav Werkzeuge or consult our specialists for tailored selection advice. VBMT 110304 NS9530 — Turning indexable insert, TM chipbreaker, finishing grade by Tungaloy VBMT110304-TM NS9530 is a rhombic, ISO-format turning indexable insert designed for precision finishing on steel components ISO-compliant rhombic insert Uncoated cermet finishing grade TM chipbreaker for stable flow 0.4 mm corner radius for fine surfaces Precision finishing for demanding steel work The uncoated cermet composition NS9530 is intended as a finishing grade for steel, offering a sharp cutting edge with low cutting forces that reduce workpiece distortion and improve dimensional accuracy. Thanks to the finely balanced microstructure of the grade, the insert produces a high surface finish on continuous cuts and small depth-of-cut operations. For engineers seeking consistent component quality, the finishing characteristics translate directly into reduced rework and improved process stability. Secure fitting and broad ISO compatibility Designed to the ISO turning insert standard, this rhombic geometry provides reliable seating in compatible holders; fit is determined by insert form, relief angle, tolerance class, fastening method, size and thickness. The cylindrical hole with single‑side countersink (40°–60°) ensures positive screw clamping and repeatable positioning. Using an ISO‑matched external holder, the system of insert, underlay/shim and clamp enables fast index changes and consistent tool set‑up, supporting predictable cycle times in production environments. Productive finishing with repeatable results The TM chipbreaker on this grade is optimised for finishing, promoting controlled chip formation and safe evacuation at modest feeds. The combination of a 0.4 mm corner radius and 5° relief angle helps keep cutting forces low while maintaining an accurate cutting edge, which is particularly beneficial for long, uninterrupted cuts. In practical terms, these properties help maintain tool performance over successive indexings, contributing to reliable, repeatable surface quality and less downtime for tool adjustments. For precise finishing applications, contact Metav Werkzeuge for assistance with holder compatibility and batch supply options — our specialists will recommend the best set‑up for the VBMT110304-TM NS9530 and your turning task. Technical data Article number: 6945307 Manufacturer SKU: TUN6945307 Label: VBMT110304-TM NS9530 Model series: ISO turning indexable inserts Material: Cemented carbide Grade: NS9530 Chipbreaker: TM Facts Thickness: 3.18 mm Size: 11 mm Relief angle: 5° Plate/lead angle: 35° Corner radius: 0.4 mm Manufacturer article number: 6945307 SKU: 6945307-Tungaloy Special features Uncoated cermet finishing grade NS9530 Rhombic insert geometry Cylindrical hole + single‑side countersink (40°–60°) TM chipbreaker optimised for finishing Suitable for continuous cuts and small depths Compatibility requires matching ISO holder form, clearance, tolerance, fastening, size and thickness FAQ Which materials is this insert intended for? The VBMT110304-TM NS9530 is formulated as a finishing grade for steel, providing low cutting forces and an improved surface finish for continuous turning operations. Is the insert coated and what cutting style is recommended? This insert is an uncoated cermet; it is best used for finishing cuts and small depth-of-cut conditions where a sharp edge and fine surface quality are priorities. How is the insert secured in the holder? The insert features a cylindrical hole with a single‑side countersink (40°–60°) to allow screw clamping, ensuring secure and repeatable seating in ISO-compatible holders. What does the TM chipbreaker do? The TM chipbreaker is designed to produce stable chip formation during finishing, aiding chip control and minimising surface defects on steel components. How to ensure compatibility with an existing holder? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; verify the holder accepts a VBMT 11-size rhombic insert with 3.18 mm thickness and the specified hole style. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of NS9530 cermet finishing grade, a 0.4 mm nose radius and the PS chipbreaker for reliably high surface quality and low cutting forces; order the VBMT110304-PS NS9530 directly via Metav Werkzeuge or consult our advisors for application support. VBMT110304-PS NS9530 — ISO turning insert, cermet finishing, Tungaloy VBMT110304-PS NS9530 is an ISO-form finishing turning insert engineered for continuous cuts in steel, offering a sharp cutting edge and low cutting forces for superior surface finishes. Finishing cermet grade NS9530 Sharp cutting edge for fine surfaces 0.4 mm nose radius for detail work Cylindrical hole with countersink Achieve consistent high-quality finishes with a cermet grade built for turning The NS9530 grade is an uncoated cermet developed specifically as a finishing grade for steel, delivering a sharp cutting edge and low cutting forces that reduce workpiece deformation during light, continuous cuts. Cermet combines ceramic hardness with a metallic binder to provide excellent wear resistance and a fine grain structure, which helps to produce consistently smooth surface finishes without aggressive edge degradation. For operations where small depths of cut and stable surface quality matter, this insert enables predictable results and reduced rework. ISO compatibility and secure clamping for predictable tool performance Delivered in the ISO VBMT format, the insert’s rhombic profile, 11 mm size and 3.18 mm thickness ensure compatibility with standard external holders and boring bars; correct matching depends on form, relief angle and tolerance class. The insert features a cylindrical hole with a one-sided countersink (40°–60°) for reliable fastening, and a 5° relief angle that supports secure seating and repeatable indexing. The PS chipbreaker is optimised for finishing cuts, helping produce short, controllable chips and maintaining a stable cutting zone, which in turn supports steady productivity and consistent component quality. Process reliability, fine detail capability and economical finishing With a 0.4 mm nose radius, the insert is well suited to fine contouring and detail work where tight radii and surface integrity are required. The sharp edge geometry reduces cutting forces, making the grade favourable for delicate finishing passes and small feed rates. By combining Tungaloy material expertise with ISO-standard geometry, the insert contributes to lower scrap rates and predictable tool life in serial production. For technical queries regarding holder choice, feeds or speeds for specific steel variants, Metav Werkzeuge provides application advice to align the insert’s strengths with the machining strategy. For precision finishing in turning operations, order the VBMT110304-PS NS9530 from Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com / +49 2822 7131930 for tailored recommendations and rapid delivery Technical data Article number: 6998584 Manufacturer SKU: TUN6998584 Vendor SKU: 6998584-Tungaloy Facts ISO designation: VBMT110304-PS Size: 11 mm Corner radius: 0.4 mm Thickness: 3.18 mm Relief angle: 5° Included angle: 35° Special features Grade: NS9530 Cutting material: uncoated cermet Chipbreaker: PS (finishing) Plate form: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Application: Turning FAQ What materials is this insert designed for? The VBMT110304-PS NS9530 is a finishing-grade cermet insert optimised for machining steel in continuous cuts and small depths of cut. Which holder and fastening style should be used? Use an ISO-compatible external holder matched to the VBMT form; the insert’s cylindrical hole with one-sided countersink allows secure clamping with the appropriate screw and clamp assembly. What advantages does the NS9530 grade offer for finishing? NS9530 provides a sharp cutting edge and good wear resistance typical of cermet materials, resulting in low cutting forces and improved surface quality on finishing passes. Is the insert suitable for internal turning as well as external turning? Yes, the geometry and modest corner radius make the insert suitable for both external and internal turning where access and depth-of-cut constraints are compatible. Which chipbreaker should be selected for similar finishing tasks? The PS chipbreaker fitted to this insert is designed for finishing applications; it promotes short, controlled chips and supports stable surface generation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110304 NS9530 Wendeplatten - Tungaloy
VBMT 110304 NS9530 Drehwendeschneidplatte von Tungaloy Die VBMT 110304 NS9530 ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen, konzipiert als Schlichtsorte für Stahl mit Fokus auf hohe Oberflächengüte. ISO-genormte rhombische Wendeschneidplatte für Drehen Unbeschichtetes Cermet für feines Schlichten Scharfe Schneidkante für ausgezeichnete Oberflächengüte Mit zylindrischem Loch und einseitiger Senkung Eckenradius 0,4 mm für präzise Konturen Präzise Schlichtbearbeitung mit geringer Schnittkraft Die VBMT110304-PSF NS9530 bietet durch das unbeschichtete Cermet eine besonders scharfe Schneidkante, die niedrige Schnittkräfte ermöglicht und so eine herausragende Oberflächengüte bei kontinuierlichem Schnitt sicherstellt. Anwender profitieren von gleichmäßigem Spanfluss und reduzierten Vibrationen, was besonders bei feinen Zustellungen klare Vorteile in der Serienfertigung bringt. Diese Sorte wurde speziell für Schlichtoperationen an Stahl entwickelt und sorgt für reproduzierbare Ergebnisse. Kompatibilität, Form und Montagesicherheit Dank der ISO-Normierung ist die Kompatibilität zur Aufnahme über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke gewährleistet. Die rhombische Plattenform in Größe 11 mit Freiwinkel 5° und Plattendicke 3,18 mm erlaubt eine sichere Fixierung in handelsüblichen Haltern. Das zylindrische Loch mit einseitiger Senkung (40°–60°) erleichtert die Montage und verbessert die Lagegenauigkeit, was die Rüstzeiten verkürzt und die Prozesssicherheit erhöht. Materialwahl und Wirtschaftlichkeit im Fertigungsprozess Das BasisÂmaterial Hartmetall kombiniert mit der NS9530 Schlichtsorte bietet eine wirtschaftliche Balance aus Standzeit und Zerspanqualität. Für Betriebe, die eine konstante Serienqualität bei minimalen Nacharbeitzeiten anstreben, stellt diese Wendeschneidplatte eine wirtschaftlich attraktive Lösung dar. Die reduzierte Nacharbeit durch verbesserte Oberflächen reduziert Gesamtkosten und steigert die Produktivität über viele Werkstücke hinweg. Anwendungsempfehlung und Zielgruppen Dieses Wendeschneidplattensystem richtet sich an Fertigungsbetriebe und Lohnfertiger, die präzise Schlichtbearbeitung an Stahl durchführen. Ideal ist die Platte für Anwendungen mit kontinuierlichem Schnitt, kleinen Zustellungen und hohem Anspruch an Oberflächenqualität. Die Kombination aus scharfer Kante, stabilem Spanverhalten und ISO-Kompatibilität macht sie zur ersten Wahl für Serienfertigungen mit gleichbleibenden Anforderungen. Kaufen Sie die hochwertige Cermet-Schneidplatte von Tungaloy direkt bei Metav Werkzeuge; für technische Beratung und Bestellhilfe steht das Team per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung Produktmerkmale Artikelnummer: 6998576 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6998576 Daten Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet Sorte: NS9530 (Schlichtsorte) Spanbrecher: PSF (feine Schlichtspanform) Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Bezeichnung: VBMT110304-PSF FAQ Welche Werkstoffe lassen sich mit dieser Wendeschneidplatte bearbeiten? Die VBMT 110304 NS9530 von Tungaloy wurde speziell für die Bearbeitung von Stahl entwickelt und eignet sich hervorragend für Schlichtvorgänge mit hohem Anspruch an Oberflächengüte. Ist die Platte mit gängigen ISO-Außenhaltern kompatibel? Ja, die ISO-Genormung der VBMT110304-PSF gewährleistet Kompatibilität zu handelsüblichen Außenhaltern, sofern Form, Freiwinkel und Größe übereinstimmen. Welche Besonderheit hat der Spanbrecher PSF? Der PSF-Spanbrecher ist für feine Schlichtspanformen ausgelegt und sorgt für kontrollierten Spanfluss und stabile Spanbildung bei kontinuierlichem Schnitt. Wie beeinflusst der Eckenradius 0,4 mm das Bearbeitungsergebnis? Der Eckenradius 0,4 mm ermöglicht präzise Konturen und feine Oberflächen, ideal für Anwendungen mit kleinen Zustellungen und hohen Oberflächenanforderungen. Welche Vorteile bietet das unbeschichtete Cermet gegenüber beschichteten Sorten? Unbeschichtetes Cermet liefert eine besonders scharfe Schneidkante und verbesserte Oberflächengüte bei Schlichtoperationen, bei gleichzeitig niedrigen Schnittkräften. für de-DE: Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 110304 NS9530 Wendeplatten - Tungaloy
VBMT110304-PSS NS9530 ISO-Drehwendeschneidplatte für Drehen von Tungaloy Die VBMT110304-PSS NS9530 ist eine ISO-genormte Wendeschneidplatte für Schlichtanwendungen beim Drehen, konzipiert für kontinuierlichen Schnitt und kleine Zustellungen. ISO-genormte rhombische Wendeschneidplatte Unbeschichteter Cermet für feine Schlichtbearbeitung Scharfe Schneidkante reduziert Schnittkräfte 0,4 mm Eckenradius für herausragende Oberflächengüte Zylindrisches Loch mit einseitiger Senkung (40°–60°) Wirtschaftlichkeit durch präzise Schlichtleistung Bei der Schlichtbearbeitung steht die Kombination aus scharfer Schneidkante und geringem Schnittwiderstand im Vordergrund. Die unbeschichtete Cermet-Sorte NS9530 erzeugt niedrige Schnittkräfte und ermöglicht so stabilere Prozesse bei Stahlbearbeitung. Für Fertigungen mit kleinen Zustellungen bedeutet das weniger Nacharbeit und konsistente Oberflächengüte, was Durchlaufzeiten und Nachbearbeitungskosten senkt. Konstruktion und Passgenauigkeit für zuverlässigen Einsatz Die rhombische Plattenform mit 0,4 mm Eckenradius und einem Freiwinkel von 5° sorgt für definierte Kontaktbedingungen zum Werkstück. Die ISO-Genormung garantiert die Kompatibilität zu gängigen Außenhaltern und Bohrstangen, wobei Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke die Auswahl des passenden Halters bestimmen. Die Ausführung mit zylindrischem Loch und einseitiger Senkung erleichtert die stabile Spannungsaufnahme. Werkstofffokus und typische Anwendungen Diese Schlichtsorte richtet sich gezielt an die Bearbeitung von Stahl im kontinuierlichen Schnitt. Typische Anwendungen sind Außen- und Innendrehen mit kleinen Zustellungen, bei denen die Priorität auf Oberflächengüte und Maßhaltigkeit liegt. Die Sorte NS9530 ist speziell abgestimmt auf feine Spanbildung und eine scharfe Schneidkante, wodurch empfindliche Kontur- und Abschlussbearbeitungen wirtschaftlich realisiert werden. Einsatzempfehlung und Prozesssicherheit Für zuverlässige Ergebnisse empfiehlt sich die Auswahl eines passenden Spanbrechers und einer halterkompatiblen Kombination, die Stabilität und Schnittbedingungen berücksichtigt. In gut eingerichteten Prozessen reduziert die VBMT110304-PSS NS9530 Ausschuss und sorgt für konstante Bauteilqualität, vor allem bei Serien mit hohem Anspruch an Oberflächenfinish. Empfohlen: Die VBMT110304-PSS NS9530 von Tungaloy für präzise Schlichtbearbeitung; bei Fragen eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6998579 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT110304-PSS NS9530 Daten Eckenradius: 0,4 mm Freiwinkel: 5° Winkel: 35° Plattendicke: 3,18 mm Plattengröße: 11 mm SKU Hersteller: TUN6998579 Herstellersku: 6998579-Tungaloy Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet (NS9530: Schlichtsorte für Stahl) Sorte: NS9530 — Schlichtsorte, niedrige Schnittkräfte Spanbrecher: PSS — für feine Spanbildung und gute Oberflächengüte Plattenform: Rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Modellserie: ISO-Drehwendeschneidplatten Anwendung: Drehen Typische Anwendung: Außen- und Innendrehen; Schlichtanwendungen; kontinuierlicher Schnitt; kleine Zustellungen FAQ Welche Vorteile bietet die NS9530-Sorte bei Schlichtbearbeitung? Die NS9530-Sorte der VBMT110304-PSS NS9530 liefert eine scharfe Schneidkante und geringe Schnittkräfte, was zu verbesserter Oberflächengüte und reduzierter Nacharbeit bei Stahl führt. Ist die VBMT110304-PSS NS9530 mit Standard-Außenhaltern kompatibel? Ja, die Platte ist ISO-genormt; Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Für welche Zustellungen ist die Wendeschneidplatte besonders geeignet? Die VBMT110304-PSS NS9530 ist besonders für kleine Zustellungen und kontinuierlichen Schnitt ausgelegt, bei denen Maßhaltigkeit und Oberfläche im Vordergrund stehen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 110304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet cutting edge, precise geometry and ISO compatibility to achieve consistently high surface quality in finishing cuts; order the VBMT110304-TSF NS9530 directly via Metav Werkzeuge or ask our consultants if needed. VBMT110304 NS9530 — ISO turning insert for precision steel finishing by Tungaloy The VBMT110304-TSF NS9530 is an ISO turning insert designed for finishing operations in steel, optimised for continuous cuts and small depths of cut with a dedicated TSF chipbreaker. Cermet finishing grade NS9530 Sharp cutting edge for low cutting forces 0.4 mm corner radius for fine finishes ISO VBMT 110304, 5° clearance angle Consistent finishing performance with low cutting forces The uncoated cermet grade NS9530 delivers a consistently sharp cutting edge, which reduces cutting forces and improves surface finish in finishing operations. Cermet combines ceramic hardness with metal toughness, enabling a fine, stable edge that resists thermal softening during continuous cuts. This results in improved part quality and reduced need for secondary finishing; the combination of low force and high edge integrity supports quieter machining and better dimensional stability on turned components. System compatibility and mounting for reliable production The insert is supplied in the ISO VBMT form and its compatibility with holders depends on shape, relief angle, tolerance class, fastening method, size and thickness. The insert has an inscribed circle of 11 mm, a thickness of 3.18 mm and a 0.4 mm corner radius, with a 5° clearance angle and an included angle of 35°, giving a predictable cutting geometry. Mounting is via a cylindrical hole with a single-sided countersink (40°–60°), compatible with common clamping systems; a matching seat, shim and screw complete the system for secure fixed-position cutting. Select the TSF chipbreaker and the NS9530 grade to match the workpiece stability and the finishing strategy. Operational benefits and application guidance Using this ISO insert for external and internal turning yields measurable productivity gains in finishing contexts: the sharp cermet edge lowers cutting forces and reduces vibration, which in turn extends tool life of both insert and holder while securing superior surface integrity on steel. The insert is particularly suitable for continuous cutting and small depth-of-cut operations where high surface quality is required. For varied steels and stable setups the combination of the TSF chipbreaker and the NS9530 grade provides consistent chip control and repeatable results. For mixed or interrupted cuts, assess edge engagement and consider more robust grades. Contact Metav Werkzeuge for application advice, availability and precise compatibility checks for the Tungaloy VBMT110304-TSF NS9530 finishing insert — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6945288 Manufacturer SKU: TUN6945288 SKU: 6945288-Tungaloy Model series: ISO turning inserts Facts Inscribed circle: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 5° Included angle: 35° Manufacturer article number: 6945288 Special features Material: uncoated cermet (NS9530) Chipbreaker: TSF Shape: rhombic (VBMT) Hole: with cylindrical hole and single-sided countersink (40°–60°) Typical application: turning (external and internal) Series: ISO turning inserts FAQ What is the primary application for this insert? The VBMT110304-TSF NS9530 is intended for precision finishing in turning operations on steel, especially continuous cuts and small depths of cut. Which materials is the NS9530 grade suitable for? The NS9530 uncoated cermet grade is designed for finishing steels, offering a sharp edge for low cutting forces and high surface quality. How is the insert mounted? The insert uses a cylindrical hole with a single-sided countersink (40°–60°) and is compatible with standard VBMT clamping systems when matched by size, thickness and tolerance class. What benefits does the TSF chipbreaker provide? The TSF chipbreaker is matched to the NS9530 grade to aid chip control in finishing cuts, supporting stable chip flow and consistent surface finish. Can this insert be used for interrupted cuts? The insert is optimised for continuous cutting and small depths of cut; for interrupted or heavy roughing consider a tougher grade or different chipbreaker geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110304 NS9530 Wendeplatten - Tungaloy
VBMT 110304 NS9530 – Wendeplatte für Drehen von Tungaloy Die VBMT110304-PF NS9530 ist eine ISO-genormte rhombische Wendeplatte für das Außen- und Innendrehen, konzipiert als Schlichtsorte für hohe Oberflächengüte Schlichtsorte NS9530 für feine Oberflächen Rhombische Platte 11 mm mit Radius 0,4 Zylindrisches Loch mit Senkung 40°–60° Freiwinkel 5° für sauberen kontinuierlichen Schnitt Unbeschichtetes Cermet für niedrige Schnittkräfte Präzise Schlichtung für beste Oberflächen Die NS9530 Schlichtsorte wurde für das Drehen mit Fokus auf Oberflächengüte und niedrige Schnittkräfte entwickelt. Mit der scharfen Schneidkante und dem feinen Eckenradius von 0,4 mm ermöglicht die Wendeplatte feine Zustellungen und glatte Werkstückoberflächen bei kontinuierlichem Schnitt. Für Betriebe bedeutet das weniger Nacharbeit und konstante Oberflächenqualität, besonders bei anspruchsvollen Stahlbauteilen. Materialtechnologie und Praxisvorteile Die Kombination aus unbeschichtetem Cermet als Schneidstofftyp und der Hartmetall-Trägerstruktur sorgt für stabile Schneidkante und gute Standzeit beim Schlichten. Cermet ist ein Verbundwerkstoff aus keramischen und metallischen Phasen; er bietet hohe Wärmebeständigkeit und verringert die Neigung zum Anbacken. Dadurch sinken Schnittkräfte und die Oberfläche bleibt sauberer, was das Nachpolieren reduziert und die Prozesssicherheit im Serienbetrieb erhöht. Einsatzempfehlung und Auswahlhinweise Die Platte eignet sich für Außen- und Innendrehen; die Wahl des passenden Spanbrechers und der Sorte erfolgt nach Werkstoff, Bearbeitungsart und Maschinenstabilität. Die PF-Ausführung steht für einen Schlichtspanbrecher, ideal für feine Schnitte. Wichtig ist die Kompatibilität mit dem Halter: Form, Freiwinkel (5°), Toleranzklasse, Befestigung, Größe (11 mm) und Dicke (3,18 mm) müssen übereinstimmen. Für spezifische Anwendungen empfiehlt sich Rücksprache mit der technischen Beratung, um die optimale Kombination aus Platte, Halter und Schnittwerten zu finden. Empfehlung: Die NS9530-Schlichtsorte von Tungaloy bietet zuverlässige Qualität für präzise Schlichtoperationen und ist über Metav Werkzeuge erhältlich – bei Unklarheiten technische Daten per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 anfragen Produktmerkmale Artikelnummer: 6998571 Marke: Tungaloy Bezeichnung: VBMT 110304 PF Modellserie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6998571 Daten Plattengröße: 11 mm Plattendicke: 3,18 mm Eckenradius: 0,4 mm Freiwinkel: 5° Winkel: 35° Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet Spanbrecher: PF (Schlichtspanbrecher) Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Mit Loch Wendeplattenbezeichnung: VBMT110304-PF NS9530 Einsatz: Drehen Typische Anwendung: Außen- und Innendrehen Kompatibilität: Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmen die Passung zum Halter FAQ Was unterscheidet die NS9530-Schlichtsorte von anderen Sorten? Die NS9530-Schlichtsorte von Tungaloy ist als unbeschichtetes Cermet speziell auf geringe Schnittkräfte und hohe Oberflächengüte ausgelegt; die Wendeplatte VBMT110304-PF eignet sich deshalb besonders für präzise Schlichtarbeiten beim Drehen. Welche Werkstoffe lassen sich mit dieser Wendeplatte bearbeiten? Die VBMT110304-PF NS9530 von Tungaloy ist primär für Stahl-Schlichtungen ausgelegt; die Auswahl des Spanbrechers PF und die Cermet-Eigenschaften optimieren den kontinuierlichen Schnitt bei Stahlwerkstoffen. Wie wichtig ist der Freiwinkel bei der Anwendung? Der Freiwinkel von 5° beeinflusst Spanabfuhr und Schneidfläche; bei der VBMT110304-PF NS9530 trägt er zur sauberen Spanbildung und reduzierten Schnittkräften bei, was die Oberflächenqualität verbessert. Wie erkenne ich die Kompatibilität mit meinem Halter? Prüfen Sie Form, Freiwinkel 5°, Toleranzklasse, Befestigungsart, Plattengröße 11 mm und Plattendicke 3,18 mm; bei Unsicherheit hilft die technische Beratung von Metav Werkzeuge mit Angabe der Artikelnummer 6998571. Welche Rolle spielt der Eckenradius 0,4 mm? Der Eckenradius 0,4 mm der VBMT110304-PF NS9530 reduziert Schneidbelastung und unterstützt feine Oberflächen; er ist ideal für Schlichtoperationen mit kleinen Zustellungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 110304 T6215 Wendeplatten - Tungaloy
Take advantage of high wear resistance and reliable chip control for stable stainless‑steel turning; the CVD‑coated carbide grade T6215 and the PSS chipbreaker combine for extended tool life and consistent surface finish. Order this insert directly via Metav Werkzeuge or consult the technical team for application advice. VBMT 110304 T6215 — ISO turning insert, PSS chipbreaker, rhombic geometry by Tungaloy The VBMT 110304 T6215 is an ISO‑standard indexable insert designed for turning applications, optimised for stainless‑steel machining under stable to lightly interrupted cutting conditions ISO‑standard indexable insert CVD‑coated carbide T6215 PSS chipbreaker for stainless steel Rhombic 11 mm size, 0.4 mm nose radius Reliable performance for stainless‑steel turning The combination of a CVD‑coated carbide substrate and the T6215 wear‑resistant grade provides predictable tool life when turning stainless steel under steady cutting conditions. This wear behaviour reduces unplanned tool changes and supports a more continuous production rhythm, which translates into improved machine utilisation and lower overall processing costs. The PSS chipbreaker is engineered to control chips for common stainless‑steel alloys, promoting safe chip evacuation and reducing the risk of surface damage. Geometry and clamping compatibility that simplifies set‑up The insert’s rhombic shape and ISO sizing ensure compatibility with a wide range of commercially available holders; form, relief angle and tolerance class determine exact fit. Key geometry values such as the 0.4 mm nose radius, 5° relief angle and 11 mm size balance edge strength with dimensional accuracy. The standardised mounting (including a cylindrical hole with single‑side countersink (40°–60°)) allows secure clamping and straightforward replacement, helping to minimise downtime during tool changes. Productive cutting and process security With a nominal cutting angle of 35° and a plate thickness of 3.18 mm, the insert offers a stable cutting edge that withstands moderate interruptions and consistent feed rates. The CVD coating increases resistance to adhesive and abrasive wear that is typical when machining stainless steels, while the PSS chipbreaker aids in producing shorter, more manageable chips. Together these features support repeatable surface finishes and dimensional control, making the insert a practical choice for batch production or single‑part runs where reliability is a priority. Practical use and selection guidance Select an insert grade and chipbreaker according to workpiece material, machining stability and cutting data. For stainless‑steel turning under stable conditions, the T6215 grade with the PSS geometry is a balanced option offering both wear resistance and chip control. When mounting, ensure the holder matches the ISO designation and thickness to preserve clamping integrity and to achieve the intended cutting performance. For application advice or to place an order for the Tungaloy VBMT 110304 T6215 insert, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com or call +49 2822 7131930; consultants can recommend the best holder and cutting data for specific stainless‑steel grades. Technical Data Article number: 6877330 Manufacturer SKU: TUN6877330 Model series: ISO‑Drehwendeschneidplatten Type designation: VBMT110304‑PSS Full name: VBMT110304‑PSS T6215 Material: carbide Facts Nose radius: 0.4 mm Size: 11 mm Thickness: 3.18 mm Relief angle: 5° Cutting/lead angle: 35° Hole: with cylindrical hole and single‑side countersink (40°–60°) Special features CVD‑coated carbide grade T6215 PSS chipbreaker for stainless steel Rhombic insert form ISO‑standard compatibility Suitable for external and internal turning FAQ What materials is this insert designed for? The insert is optimised for machining stainless steel; the T6215 CVD‑coated carbide grade and PSS chipbreaker are matched for wear resistance and chip control when turning stainless‑steel components. Which holder type fits this ISO insert? Any ISO‑compatible turning holder matching the VBMT110304‑PSS form, thickness (3.18 mm) and hole/countersink configuration will accept the insert; compatibility depends on holder form, relief and tolerance class. How does the PSS chipbreaker improve machining? The PSS chipbreaker produces controlled, short chips in stainless‑steel turning, enhancing process safety, reducing the risk of entanglement and improving surface integrity. Is the coating suitable for interrupted cuts? The CVD coating on grade T6215 provides good wear resistance; the insert performs best under stable to lightly interrupted cutting conditions rather than very heavy interruptions. What are the key dimensions to check before ordering? Verify the insert size (11 mm), thickness (3.18 mm), nose radius (0.4 mm) and the hole/countersink style to ensure correct fit with the chosen holder. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VBMT 110304 T6215 Wendeplatten - Tungaloy
VBMT110304-PS T6215 ISO-Drehwendeschneidplatte zum Drehen — Tungaloy Die VBMT110304-PS T6215 ist eine ISO-genormte rhombische Wendeschneidplatte für das Außen- und Innendrehen von rostfreiem Stahl unter stabilen bis leicht unterbrochenen Bedingungen. CVD-beschichtetes Hartmetall T6215 Optimiert für rostfreien Stahl und stabile Zerspanung 0,4 mm Eckenradius für feine Konturen Rhombische Form mit zylindrischem Loch und Senkung PS-Spanformer für kontrollierte Spanbildung Höhere Prozesssicherheit durch passende Plattentechnik Die VBMT110304-PS T6215 verbindet CVD-beschichtetes Hartmetall mit einem feinen Eckenradius von 0,4 mm und einem Freiwinkel von 5°. Diese Kombination sorgt für stabile Schneidkanten und reduzierte Ausbrüche bei der Bearbeitung von rostfreiem Stahl, was zu konstanteren Ergebnissen und längeren Standzeiten führt. Anwender profitieren von geringeren Ausfallzeiten und planbarer Schleif- bzw. Wechselintervalle. Beschichtung und Schneidstoff: Erklärung und Kundennutzen Die CVD-Beschichtung der Sorte T6215 erhöht die Verschleißfestigkeit durch eine dünne, hartstoffhaltige Schicht, die thermische und abrasive Beanspruchung besser abfedert. Für Betriebe bedeutet das: weniger Werkzeugwechsel, bessere Oberflächenqualität und reduzierte Nachbearbeitung. Der PS-Spanformer unterstützt eine kontrollierte Spanbildung speziell bei zähen Stählen, wodurch die Prozessstabilität bei konstanten Zustellungen steigt. Kompatibilität und praktische Hinweise zur Auswahl Bei der Auswahl des passenden Halters sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke der Platte entscheidend. Die Platte hat die Größe 11 mm und eine Dicke von 3,18 mm; das zylindrische Loch mit einseitiger Senkung (40°–60°) ermöglicht sichere Befestigung und einfachen Wechsel. Empfohlen ist, Halter zu verwenden, die ISO-genormte Plattenprofile unterstützen, um Lagegenauigkeit und Wiederholgenauigkeit sicherzustellen. Wirtschaftlichkeit, Zielgruppen und Einsatzzweck Diese Wendeschneidplatte richtet sich an Lohnfertiger, Serienfertiger und Werkstätten, die rostfreie Stähle mit hoher Prozesskonstanz bearbeiten. Durch die Kombination aus verschleißfester Sorte und optimiertem Spanformer lassen sich Zykluszeiten stabil halten und Ausschuss reduzieren. Investitionen in qualitativ hochwertige Wendeschneidplatten zahlen sich durch geringeren Werkzeugverbrauch und höhere Bauteilqualität schnell aus. Für prozesssichere und wirtschaftliche Drehanwendungen empfehlen wir die VBMT110304-PS T6215 von Tungaloy — bei technischen Fragen steht die Beratung der Metav Werkzeuge GmbH per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 zur Verfügung. Produktmerkmale Artikelnummer: 6877337 Hersteller-SKU: TUN6877337 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT110304-PS Fakten Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Material: Hartmetall Schneidstoff: CVD-beschichtetes Hartmetall (chemische Gasphasenabscheidung für Verschleißschutz) Sorte: T6215 (verschleißfeste Ausführung für rostfreie Stähle) Spanformer: PS (kontrollierte Spanbildung, geeignet für zähe Werkstoffe) Plattenform: rhombisch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Mit Loch Einsatz: Drehen Typische Anwendung: Außen- und Innendrehen; Spanformer und Sorte passend zu Werkstoff und Bearbeitungsart wählen FAQ Welche Werkstoffe lassen sich mit der Wendeschneidplatte bearbeiten? Die VBMT110304-PS T6215 ist speziell für die Bearbeitung von rostfreiem Stahl ausgelegt; durch die verschleißfeste Sorte T6215 lassen sich zähe und wärmeempfindliche Stähle mit hoher Prozesssicherheit drehen. Welche Vorteile bietet die CVD-Beschichtung? Die CVD-Beschichtung der T6215 reduziert abrasiven Verschleiß und erhöht die thermische Beständigkeit, was in längeren Standzeiten und besserer Oberflächenqualität bei der Bearbeitung von rostfreiem Stahl resultiert. Wie beeinflusst der Eckenradius die Bearbeitungsergebnisse? Der Eckenradius von 0,4 mm ermöglicht feine Konturen und verringert Kerbwirkungen; dadurch verbessern sich Oberflächen und Randzonen, zugleich bleibt die Schnittstabilität bei moderaten Zustellungen erhalten. Worauf ist bei der Halterauswahl zu achten? Achten Sie auf die ISO-Kompatibilität der Aufnahme: Form, Freiwinkel, Toleranzklasse, Befestigungsart, Plattengröße und -dicke müssen zum Halter passen, um Lagegenauigkeit und sichere Spannverhältnisse zu garantieren. Für welche Bearbeitungsfälle ist der PS-Spanformer geeignet? Der PS-Spanformer ist ausgelegt für kontrollierte Spanbildung bei stabilen bis leicht unterbrochenen Schnitten, speziell hilfreich bei rostfreien Stählen, bei denen lange, faserige Späne vermieden werden sollen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 110304 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide grade T9215 and the PSS chipbreaker to secure stable chip control and high productivity in medium‑steel turning; order directly via Metav Werkzeuge or contact the consultants for application advice. VBMT 110304 T9215 indexable insert for turning — ISO rhombic 11 mm, 35° (Tungaloy) VBMT110304-PSS T9215 is a medium‑steel turning insert with a PSS chipbreaker and CVD‑coated carbide for productive continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 PSS chipbreaker for stable chip control ISO rhombic insert, 11 mm size Cylindrical hole with 40°–60° countersink Consistent productivity for medium‑steel turning The CVD‑coated carbide substrate combines wear resistance with fracture toughness, making this insert well suited for demanding production environments. As a result, machinists benefit from longer tool life and stable cutting performance during continuous and slightly interrupted turning operations. The PSS chipbreaker is optimised to control chips in medium‑strength steels, reducing the need for secondary chip handling and supporting smoother cycle times. Compatibility with the correct holder form and tolerance class ensures repeatable results on production machines. Reliable chip control reduces rework and downtime A dedicated chipbreaker geometry prevents long, tangled swarf and promotes predictable chip formation. For shops targeting higher output with fewer operator interventions, this means reduced machine stops and less risk of part damage from recutting. The cylindrical locating hole with a one‑sided countersink (40°–60°) secures the insert precisely in the seat, improving stability under cutting forces and contributing to consistent surface finish and dimensional control across batches. Practical handling and broad holder compatibility The rhombic shape with an 11 mm inscribed circle and a 0.4 mm corner radius provides a balance between edge strength and cutting precision. The insert thickness of 3.18 mm and the 5° clearance angle are standard ISO dimensions that simplify selection of compatible holders and clamping sets. Where odd geometries or interrupted cuts are present, choose the holder and clamping set that match the insert’s form, clearance and tolerance class to retain the expected performance and to enable quick, repeatable index changes on the toolpost. For reliable mid‑steel turning with proven wear resistance and chip control, contact Metav Werkzeuge for tailored application guidance on the VBMT110304-PSS T9215 — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and cutting data. Technical data Article number: 6774080 SKU: 6774080-Tungaloy Manufacturer SKU: TUN6774080 Label: VBMT110304-PSS T9215 Model series: ISO turning indexable inserts Material: carbide Numbers / Facts Inscribed circle: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 5° Approach angle: 35° Special features / Versions CVD‑coated carbide (grade T9215) PSS chipbreaker Rhombic insert shape With hole: cylindrical hole + single‑sided countersink (40°–60°) Application: turning (external and internal) Compatibility determined by holder form, clearance, tolerance class, fastening, size and thickness FAQ Which materials is this insert suited for? The VBMT110304-PSS T9215 insert is primarily designed for medium‑strength steel machining; the CVD‑coated carbide and chipbreaker combination balance wear resistance and toughness for productive turning. How should the insert be mounted to ensure stability? Use a compatible ISO rhombic holder that matches the insert’s form, clearance angle and tolerance class; the cylindrical hole with countersink secures accurate seating and reduces the risk of movement under load. Is this insert suitable for interrupted cuts? Yes — the grade and geometry are intended for continuous to slightly interrupted cuts, offering good fracture resistance for light interruptions. What benefit does the PSS chipbreaker provide? The PSS geometry produces short, manageable chips and consistent chip flow, which helps to reduce downtime caused by chip entanglement and improves surface finish stability. Can this insert be used for internal turning? The insert’s rhombic form and chip control make it suitable for both external and internal turning operations, provided the appropriate holder and clearance are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, a universal T9225 grade suited for medium to heavy steel turning, and precise ISO conformity to maintain steady production. Order compatible inserts and accessories directly via Metav Werkzeuge or consult our experts for holder compatibility and process optimisation. VBMT 110304 T9225 — ISO indexable turning insert, CVD-coated carbide, 0.4 mm radius — Tungaloy A VBMT 110304-TM T9225 indexable turning insert designed for robust external and internal turning in variable engagement conditions, offering a balance of toughness and wear resistance for medium to heavy steel machining. ISO-standard rhombic insert 110304 CVD-coated carbide, grade T9225 0.4 mm corner radius, 5° relief angle Rhombic form with hole and countersink TM chipbreaker for interrupted cuts Consistent productivity with a universal cutting grade The combination of a CVD-coated carbide substrate and the T9225 grade provides a reliable compromise between hardness and toughness, which is particularly effective for mixed or slightly interrupted cuts in steel. The result is stable chip formation and extended edge life under varying depths of cut. By choosing this insert, production planners secure a repeatable process window that reduces tool changes and downtime, supporting leaner cycle times and predictable tool consumption. Precise geometry for secure mounting and predictable results The ISO-standard geometry and the rhombic shape ensure straightforward replacement and interchangeability across compatible holders. The insert’s 0.4 mm radius and 5° relief angle contribute to a controlled cutting edge for finish and durability, while the central hole with one-sided countersink (40°–60°) simplifies clamping and alignment. Clear compatibility depends on holder form, tolerance class and thickness, so matching the insert to the correct external holder maintains clamping security and repeatable part quality. Practical benefits for shop-floor efficiency Equipped with the TM chipbreaker, the insert manages chips effectively during external and internal turning, lowering the risk of built-up edge and facilitating chip evacuation in automated or manual operations. The plate thickness of 3.18 mm and the 11 mm size deliver rigidity for more stable cutting, which translates into fewer rejected parts and improved throughput. For tasks that require versatility—from finishing to heavier passes—this insert offers an economical and robust choice that supports consistent surface quality. Discuss the Tungaloy VBMT 110304-TM T9225 application and holder compatibility with Metav Werkzeuge today — contact our team at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast supply. Technical data Article number: 6781499 Manufacturer SKU: TUN6781499 Label: VBMT110304-TM T9225 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 0.4 mm Thickness: 3.18 mm Size: 11 mm Relief angle: 5° Included angle: 35° Special features CVD-coated carbide Grade: T9225 (robust universal) Chipbreaker: TM Shape: rhombic Centre hole: with hole, cylindrical + one-sided countersink (40°–60°) Application: Turning System elements: ISO insert, matching holder, clamp pad and screws FAQ What materials is this insert suitable for? This insert in T9225 grade is designed primarily for steel machining and delivers good performance in medium to heavy turning operations. How does the TM chipbreaker affect performance? The TM chipbreaker on the VBMT 110304-TM T9225 improves chip control during interrupted cuts and mixed engagement, supporting stable cutting and reduced edge wear. Which holders are compatible with this ISO insert? Compatibility depends on holder form, free angle, tolerance class, fastening method, size and thickness; matching these parameters to the VBMT 110304-TM T9225 ensures secure clamping and repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110304 T9225 Wendeplatten - Tungaloy
VBMT 110304 T9225 Drehwendeschneidplatte für Drehen von Tungaloy Die VBMT 110304 T9225 ist eine ISO-genormte rhombische Drehwendeschneidplatte, konzipiert für das Außen- und Innendrehen bei mittleren bis schweren Stahlbearbeitungen. Robuste CVD-Beschichtung für hohe Standzeit Passgenau für ISO-Halter und normative Befestigung Rhombische Form, Plattengröße 11 mm Eckenradius 0,4 mm für exakte Kantenausbildung Zylindrisches Loch mit einseitiger Senkung (40°–60°) Langlebigkeit durch CVD-beschichteten Schneidstoff Die Platte basiert auf CVD-beschichtetem Hartmetall der Sorte T9225, eine robuste Universalsorte, die Zähigkeit und Verschleißfestigkeit verbindet. Durch die CVD-Beschichtung verbessert sich die Wärmebeständigkeit und damit die Standzeit bei kontinuierlicher Belastung. Für Betriebe bedeutet das weniger Werkzeugwechsel, geringere Rüstzeiten und konstantere Bauteilqualität bei wechselnden Eingriffsbedingungen. Geometrie, Spanformer und Schnittstabilität Die rhombische Plattenform mit Eckenradius 0,4 mm und Freiwinkel 5° sorgt für stabile Spanbildung und gleichmäßige Schnittkräfte. Der eingeprägte Spanbrecher PSF ist für vielseitige Schnittbedingungen ausgelegt und unterstützt saubere Spanabfuhr bei Außen- und Innendrehoperationen. Anwender profitieren von reproduzierbarer Oberflächengüte und planbaren Werkzeugstandzeiten. Passgenauigkeit, Aufnahme und Montagehinweise Als ISO-genormte Drehwendeschneidplatte ist die Kompatibilität zum Halter über Form, Freiwinkel, Toleranzklasse und Befestigung definiert. Die Platte verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°), Plattendicke 3,18 mm und Plattengröße 11 mm; diese Werte sind bei Auswahl des Außenhalters zu beachten. Eine korrekte Unterlage und geeigneter Klemmsatz verbessern die Wiederholgenauigkeit und reduzieren Schwingungsneigung. Typische Anwendungen und Werkstoffangaben Die Einsatzempfehlung umfasst vor allem das Drehen von Stahl unter mittleren bis schweren Bedingungen; die Sorte T9225 bietet erhöhte Zähigkeit für leicht unterbrochene Schnitte. In der Praxis eignet sich die Platte für Serienfertigung genauso wie für geregelte Einzelfertigung, sofern passende Schnittdaten und Kühlschmierstoffstrategien angewendet werden. Die robuste Ausführung unterstützt einen stabilen Produktionsprozess mit vorhersehbarer Produktivität. Für produktive Zerspanung empfiehlt Metav Werkzeuge den Einsatz der Tungaloy T9225-Sorte; bei weiterem Klärungsbedarf steht der technische Vertrieb gern zur Verfügung, eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6781113 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VBMT110304-PSF Fakten Winkel: 35° Freiwinkel: 5° Plattendicke: 3,18 mm Plattengröße: 11 mm Eckenradius: 0,4 mm Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet (CVD: Chemische Gasphasenabscheidung) Sorte: T9225 Spanbrecher: PSF Plattenform: rhombisch Loch: mit zylindrischem Loch und einseitiger Senkung (40°–60°) Einsatz: Drehen Typische Anwendung: Außen- und Innendrehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Welche Werkstoffe sind für diese Platte geeignet? Die VBMT110304-PSF T9225 von Tungaloy ist primär für Stahl ausgelegt; die Sorte T9225 bietet Zähigkeit für wechselnde Eingriffsbedingungen und damit gute Performance beim Bearbeiten von legiertem und unlegiertem Stahl. Wie beeinflusst der Eckenradius die Oberflächengüte? Der Eckenradius 0,4 mm reduziert Kerbwirkung und ermöglicht eine feinere Kantenausbildung; bei der VBMT110304-PSF T9225 führt das zu stabilerer Schnittkante und besserer Oberflächengüte bei standardisierten Schnittdaten. Welche Vorteile bietet die CVD-Beschichtung der Sorte T9225? Die CVD-beschichtung auf Hartmetall sorgt für erhöhte Wärmebeständigkeit und bessere Verschleißfestigkeit; das Ergebnis bei der VBMT110304-PSF T9225 ist längere Standzeit und geringere Ausfallzeiten in der Produktion. Wie ist die Platte im Halter zu befestigen? Die ISO-genormte Form und das zylindrische Loch mit Senkung erlauben eine definierte Befestigung; bei der VBMT110304-PSF T9225 sind passende Unterlage und Klemmsatz sowie die korrekte Toleranzklasse des Halters wichtig für Wiederholgenauigkeit. Für welche Schnittbedingungen ist der Spanbrecher PSF geeignet? Der Spanbrecher PSF ist für vielseitige Schnittbedingungen konzipiert und unterstützt saubere Spanabfuhr bei mittleren bis schweren Schnitten; in Kombination mit der T9225-Sorte bietet die VBMT110304-PSF gute Stabilität bei leicht unterbrochenen Schnitten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 110304 T9225 Wendeplatten - Tungaloy
VBMT 110304 T9225 ISO-Drehwendeschneidplatte für Drehen, Hersteller Tungaloy Die VBMT 110304 T9225 ist eine ISO-genormte rhombische Drehwendeschneidplatte, entwickelt für Außen- und Innendrehen bei wechselnden Eingriffsbedingungen und leicht unterbrochenem Schnitt, ausgestattet mit CVD-Beschichtung und zylindrischem Loch mit einseitiger Senkung. VBMT 110304 T9225 ISO-genormte rhombische Platte CVD-beschichtetes Hartmetall für hohe Standzeit Robust bei mittlerer bis schwerer Stahlbearbeitung Zylindrisches Loch mit einseitiger Senkung 40°–60° Spanbrecher TSF für stabile Spanbildung Produktivität steigern durch robuste Schneidstoffwahl Die Kombination aus CVD-beschichtetem Hartmetall und der Sorte T9225 sorgt für eine ausgeglichene Mischung aus Zähigkeit und Verschleißfestigkeit, wodurch sich die Werkzeugstandzeit verlängert und Rüstzyklen reduziert werden. Besonders bei wechselnden Schnittbedingungen bleibt die Schneidkante stabil, was zu konstanteren Bearbeitungsergebnissen und effizienteren Produktionsabläufen führt. Dieser Aspekt macht die Platte zu einer wirtschaftlichen Wahl für Serien und Einzelfertigung. Kompatibilität und Einsatzgebiete sichern Prozesssicherheit Weil die Platte ISO-genormt ist, richtet sich die Kompatibilität am Halter nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; das gewährleistet planbare Austauschzyklen und einfache Ersatzbeschaffung. Die Platte ist primär für Außen- und Innendrehen geeignet und empfiehlt sich insbesondere für anspruchsvolle Stahlaufgaben, bei denen eine robuste Universalsorte gefordert ist. Technische Variablen wie Freiwinkel 5° und Rhombusform unterstützen stabile Schnittverhältnisse. Einfachere Bedienung und verlässliche Spanbildung Der Spanbrecher TSF ist so konstruiert, dass er bei mittleren bis schweren Schnitten konstante Spanformen erzeugt und so die Maschinensicherheit erhöht. Die Ausführung mit zylindrischem Loch und einseitiger Senkung (40°–60°) erleichtert das exakte Spannbild und die Montage, wodurch Rütteln und ungleichmäßige Schnittkräfte reduziert werden. Das Ergebnis ist ein planbarer Prozess mit weniger Ausschuss und längeren Standzeiten des Halters. Zielgruppe und empfohlene Anwendungen Dieses Wendeschneidplatten-Design wurde für Fertigungsbetriebe, Lohnzerspaner und Werkstätten entwickelt, die regelmäßige Stahlbearbeitung mit wechselnden Schnittbedingungen durchführen. Die Platte ist ideal, wenn mittlere bis schwere Stahlbearbeitung gefragt ist und sowohl Produktivität als auch Verfügbarkeit eine Rolle spielen. Durch die universelle Einsetzbarkeit eignet sich die Platte sowohl für Serien mit stabilen Parametern als auch für variierende Losgrößen. Empfehlung: Für prozesssichere und produktive Drehbearbeitung die Tungaloy VBMT 110304 T9225 einsetzen; technische Beratung und Verfügbarkeit über Metav Werkzeuge anfragen: info@metav-werkzeuge.com | +49 2822 7131930 Produktmerkmale Artikelnummer: 6781471 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6781471 Bezeichnung: VBMT110304-TSF T9225 Fakten Eckenradius: 0,4 mm Freiwinkel: 5° Winkel: 35° Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Material: Hartmetall Sorte: T9225 (robuste Universalsorte) Schneidstoff: CVD-beschichtetes Hartmetall Spanbrecher: TSF Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Anwendung: Drehen Einsatzbereich: Außen- und Innendrehen Kompatibilität: ISO-genormt FAQ Welche Materialien lassen sich mit der VBMT 110304 T9225 bearbeiten? Die VBMT 110304 T9225 von Tungaloy ist ausgelegt für Stahlbearbeitung, insbesondere für mittlere bis schwere Stahlaufgaben; die Sorte bietet gute Zähigkeit bei wechselnden Eingriffsbedingungen. Welche Rolle spielt die CVD-Beschichtung bei der VBMT 110304 T9225? Die CVD-Beschichtung der VBMT 110304 T9225 erhöht die Verschleißfestigkeit und verbessert die Standzeit, ohne die Zähigkeit der Grundlegierung zu stark einzuschränken, was zu gleichmäßigeren Serienergebnissen führt. Wie sorgt der Spanbrecher TSF für stabilere Bearbeitung? Der Spanbrecher TSF formt die Späne so, dass die Spanabfuhr kontrollierter erfolgt; das reduziert Klemmeffekte und verringert Vibrationen, was die Prozesssicherheit bei der Tungaloy VBMT 110304 T9225 erhöht. Ist die Platte mit Standard-Außenhaltern kompatibel? Ja, die VBMT 110304 T9225 ist ISO-genormt; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab, daher empfehlen sich passende ISO-Außenhalter. Für welche Bearbeitungsbedingungen ist die Sorte T9225 besonders geeignet? Die Sorte T9225 ist eine robuste Universalsorte, ideal für mittlere bis schwere Schnittbedingungen und leicht unterbrochene Schnitte, wenn Zähigkeit und Verschleißfestigkeit gleichermaßen gefragt sind. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VBMT 110304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated cemented carbide, ISO compatibility and a 0.4 mm nose radius for predictable medium-to-heavy steel turning and fewer tool changes; order genuine inserts directly via Metav Werkzeuge or consult our specialists for tailored recommendations. VBMT 110304 T9225 — ISO turning insert by Tungaloy, CVD-coated, 0.4 mm radius VBMT110304-PS T9225 is an ISO-standard rhombic turning insert designed for medium to heavy turning where toughness and chip control are required CVD-coated cemented carbide T9225 Robust universal grade for medium/heavy steel ISO VBMT geometry with 0.4 mm radius Cylindrical hole with single-side countersink Consistent productivity from a tough universal grade The insert is built on a CVD-coated cemented carbide substrate, the T9225 grade being formulated for robust universal performance in steel turning. This combination provides a balance between hardness and toughness, which translates into longer tool life under variable engagement conditions and when light interruptions occur. The chipbreaker PS is tailored to stabilise chip flow in medium-to-heavy cutting, reducing the need for frequent intervention and supporting continuous production runs. Clear compatibility and simple system integration As an ISO-standard insert, the geometry and mounting follow established norms; compatibility depends on form, relief angle, tolerance class, fixation, size and thickness. The rhombic shape with a 5° relief angle and a cylindrical hole with single-side countersink (40°–60°) ensures secure clamping in appropriate VBMT holders and boring bars. The system comprises the insert, a matching external holder or boring bar, a shim/clamping set and replacement screws, which together permit straightforward mounting and repeatable seating at each index. Technical advantage: nose radius and insert thickness explained The 0.4 mm nose radius supports a compromise between surface finish and strength at the cutting edge: it sustains heavier cuts better than a finer radius while still delivering acceptable surface quality. The plate thickness of 3.18 mm contributes rigidity at the cutting edge, particularly valuable when facing variable cutting forces typical in medium to heavy turning. The rhombic form and included hole style allow reliable seating and straightforward tool set-up for consistent results. Application guidance and selection logic for workshops This insert is primarily intended for turning operations on steels where alternating load or slightly interrupted cuts demand extra toughness. Selection of the chipbreaker and the T9225 grade should be matched to the workpiece material, machining strategy and overall machine–workpiece stability. In practice, pairing the insert with a rigid external holder and optimised cutting data yields the best economy: fewer insert changes, stable edges and reproducible part quality, which supports predictable process planning and lower unit cost. For application-specific advice or to secure original Tungaloy VBMT110304-PS T9225 inserts, contact Metav Werkzeuge for expert recommendations and fast delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6781129 Manufacturer SKU: TUN6781129 Supplier SKU: 6781129-Tungaloy Model series: ISO turning inserts Designation: VBMT110304-PS T9225 Material: cemented carbide Coating: CVD Numbers / Core technical data Nose radius: 0.4 mm Relief angle: 5° Plate thickness: 3.18 mm Inscribed circle / size: 11 mm Approach / included angle: 35° Countersink angle: 40°–60° Special features / Versions Rhombic plate shape Chipbreaker: PS Hole: cylindrical hole with single-side countersink Intended application: turning (external and internal) System components: insert, matching external holder or boring bar, shim/clamping set, replacement screws Grade application: medium to heavy steel turning, suitable for lightly interrupted cuts FAQ What materials is this insert designed for? The VBMT110304-PS T9225 insert is intended for medium to heavy steel turning; the T9225 grade emphasises toughness for variable engagement and light interruptions. How does the chipbreaker PS affect machining? The chipbreaker PS controls chip formation for stable evacuation in heavier cuts, improving process reliability when using the VBMT110304-PS T9225 insert. Is the insert compatible with standard VBMT holders? Yes; the rhombic ISO form, 5° relief angle and standard dimensions make the VBMT110304-PS T9225 compatible with matching ISO VBMT external holders and boring bars, provided the holder matches form, tolerance and fixation. What does the 0.4 mm nose radius mean for surface finish? A 0.4 mm radius balances edge strength and finish: it is robust enough for heavier cuts while still producing acceptable surface quality for most turning operations with VBMT110304-PS T9225. Can this insert handle interrupted cuts? The T9225 grade offers increased toughness and is suitable for slightly interrupted cuts; it is a robust universal grade for such conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, precise ISO geometry and a reliable chipbreaker for consistent turning performance; order the VBMT110304-PSS T9225 directly via Metav Werkzeuge or consult our specialists for application advice. VBMT110304-PSS T9225 — ISO indexable turning insert for turning, CVD-coated carbide, Tungaloy A VBMT110304-PSS T9225 indexable insert engineered for external and internal turning, offering a robust universal grade suitable for medium to heavy steel machining. CVD-coated carbide T9225 Robust universal grade for medium–heavy steel Rhombic insert 11 mm with 0.4 mm radius Cylindrical hole with countersink 40°–60° Consistent cutting performance that reduces downtime The CVD-coated carbide composition in this insert provides enhanced wear resistance and thermal stability, so cutting edges retain form during extended runs. As part of a standard ISO insert family, the indexable insert geometry ensures reproducible positioning and straightforward replacement, which reduces machine downtime and tooling costs. The T9225 grade has been developed as a universal solution for variable engagement conditions and slightly interrupted cuts; this means fewer tool changes and more predictable process windows when turning a wide range of steels. Chip control is supported by the integrated chipbreaker PSS, which is optimised for medium to heavy cutting depths and helps maintain stable swarf flow under unstable feeds. Secure seating and precise fit for reliable production results Compatibility with holders depends on form, clearance angle, tolerance class, fixation, size and thickness; the insert’s rhombic 11 mm form and corner radius 0.4 mm combine to deliver good strength at the cutting edge while still enabling fine surface finishes. The plate measures 11 mm across with a plate thickness of 3.18 mm, a lead angle of 35° and a clearance angle of 5°, and it features a cylindrical hole with a single-sided countersink (40°–60°). These specifications permit secure clamping in standard ISO toolholders and boring bars, ensuring repeatable tool setting and minimised runout. For production environments, consistent clamping and accurate repeatability translate directly into improved component tolerances and less rework. Economic efficiency and guidance for practical use Selecting the T9225 grade together with the PSS chipbreaker gives a balanced mix of toughness and wear resistance; this is advantageous where cutting conditions vary or small interruptions occur. The insert is intended primarily for steel turning and is suitable for both external and internal applications when matched to an appropriate holder. In practice, this means stable machining for batch production and flexibility across jobs without needing multiple specialised grades. Routine replacement is simplified by the standardised ISO form, and operators benefit from predictable edge life and consistent surface quality, supporting efficient throughput and lower tooling expenditure over time. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy indexable inserts into production and to secure supply of VBMT110304-PSS T9225 for improved turning reliability Technical data Article number: 6781008 SKU: 6781008-Tungaloy Manufacturer SKU: TUN6781008 Model series: ISO indexable turning inserts Designation: VBMT110304-PSS T9225 Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Lead angle: 35° Clearance angle: 5° Plate thickness: 3.18 mm Inscribed circle / size: 11 mm Special features CVD-coated carbide Grade T9225 Chipbreaker PSS Rhombic plate form Cylindrical hole with single-sided countersink (40°–60°) Compatible with ISO holders and boring bars Typical application: external and internal turning System components: insert, matching holder or boring bar, clamping pad/kit and replacement screws FAQ What materials is this insert suited for? The VBMT110304-PSS T9225 is primarily intended for machining steel; the T9225 grade is a robust universal option for medium to heavy steel turning operations. How does the chipbreaker affect cutting performance? The PSS chipbreaker on the VBMT110304-PSS T9225 promotes controlled chip formation and swarf evacuation in varying engagement conditions, which helps maintain stable cutting and consistent surface finish. Which holders will accept this insert? Any ISO-compatible external holder or boring bar that matches the VBMT form, 11 mm size, 3.18 mm thickness and the required clearance and fixation will accept this insert; correct matching ensures repeatable clamping and minimal runout. Is the insert suitable for interrupted cuts? Yes, the T9225 grade is designed to provide increased toughness for slightly interrupted cutting and variable engagement, making it a reliable choice for non-uniform turning conditions. What advantages does the CVD coating provide? The CVD coating on this carbide insert improves wear resistance and reduces thermal deformation at high cutting temperatures, extending edge life and supporting longer production runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VBMT 110308 AH120 Wendeplatten - Tungaloy
Combining a PVD-coated AH120 carbide grade, a PS chipbreaker and ISO VBMT geometry, this insert provides wear-resistant cutting performance with reliable chip control for both external and internal turning. Order the VBMT110308-PS AH120 directly via Metav Werkzeuge or ask our consultants if needed. VBMT110308-PS AH120 ISO turning insert, PVD-coated carbide, PS chipbreaker — Tungaloy A VBMT110308-PS AH120 insert for precision external and internal turning, offering process-stable cutting with a PVD-coated carbide grade and a PS chipbreaker. ISO rhombic insert VBMT110308 format PVD-coated AH120 carbide for wear resistance PS chipbreaker for consistent chip control Cylindrical hole with 40°–60° one-side countersink Stable cutting and predictable chip control The combination of a PVD-coated surface and the AH120 carbide grade yields a balanced performance that prioritises process stability and consistent tool life. The integrated PS chipbreaker is engineered to form short, controllable chips under a wide range of cutting conditions; this reduces the risk of entanglement and enhances machine uptime. In practice, the chipbreaker geometry helps to direct chips away from the cutting zone and to maintain a stable cutting force, which is particularly valuable when switching between external and internal turning operations. Longer tool life through edge integrity and coating technology A sharp, durable cutting edge is essential for repeatable results. The carbide substrate combined with a PVD coating reduces flank wear and improves resistance to abrasive and adhesive wear mechanisms, which results in fewer insert changes and more consistent surface finish. Where process security and a well-defined cutting edge are required, this insert offers measurable benefits: extended service intervals and reduced secondary operations. The material selection and coating technology together contribute to reliable component tolerances over serial production runs. Clear mounting guidance and application suitability Built to ISO dimensions and a rhombic plate form, the insert fits established insert holders when the form, 5° clearance angle, tolerance class, fixing method, size and thickness match the holder specification. Key geometry values such as the 0.8 mm corner radius, 3.18 mm thickness and 35° lead angle influence cutting behaviour; the plate’s cylindrical hole with a one-side countersink (40°–60°) ensures secure clamping and positional accuracy. The system is completed by a compatible external holder or boring bar, a shim and the correct clamping screw; select the chipbreaker and grade to suit the workpiece material and machining stability for best results. For tailored application advice and to secure genuine Tungaloy inserts such as the VBMT110308-PS AH120, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will recommend the optimal grade and holder combination Technical data Item: VBMT110308-PS AH120 Brand: Tungaloy Manufacturer article number: 6837190 Manufacturer SKU: TUN6837190 SKU: 6837190-Tungaloy Model series: ISO turning indexable inserts Core specifications Corner radius: 0.8 mm Plate thickness: 3.18 mm Inscribed circle / size: 11 mm Clearance angle: 5° Lead/approach angle: 35° Countersink angle: 40°–60° Design and features PVD-coated carbide (AH120) PS chipbreaker geometry Rhombic plate form (VBMT) With hole: cylindrical hole + one-side countersink (40°–60°) ISO designation: VBMT110308-PS Typical application: external and internal turning System composition: insert + holder + shim + clamping screw FAQ What materials is this insert suitable for? The VBMT110308-PS AH120 is designed as a wear- and chipping-resistant grade for general turning; the AH120 PVD-coated carbide performs well across a broad spread of materials when the correct chipbreaker and machining parameters are chosen. How does the PS chipbreaker affect machining? The PS chipbreaker on the VBMT110308-PS AH120 shapes chips into short, controllable segments, improving chip evacuation and contributing to process reliability during repetitive turning operations. Which holders are compatible with this insert? Compatibility depends on holder form, free angle, tolerance class, fixing method, size and thickness; the VBMT110308-PS follows ISO geometry, so matching ISO holders and the correct clamping components are required for secure mounting. What are the key geometry values to consider when selecting this insert? Important values are the 0.8 mm corner radius, 3.18 mm plate thickness, 11 mm inscribed circle and the 5° clearance angle and 35° lead angle; these influence cutting forces, surface finish and tool engagement. Is the insert supplied with screws or shims? The product listing refers to the insert itself; the complete system comprises the insert, a suitable holder, shim and clamping screws, which should be selected or ordered according to the machine setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com