VCMT 080204 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of versatile PVD-coated AH725 grade, the PSF chipbreaker for consistent chip control and ISO compatibility for straightforward toolholder mounting; this yields reliable machining performance and predictable tool life. Order directly via Metav Werkzeuge or consult our specialists for application advice. VCMT 080204 AH725 ISO turning insert for turning by Tungaloy — PSF chipbreaker, 7° clearance The VCMT080204-PSF AH725 is an ISO-format indexable insert designed for external and internal turning, offering a universal, chipbreak-optimised grade suitable for mixed steels and stainless steels. Universal PVD-coated AH725 grade PSF chipbreaker for stable chip control Rhombic VCMT form, 7° clearance Cylindrical hole with 40°–60° countersink Stable cutting with a versatile PVD-coated grade The combination of a PVD-coated surface and the AH725 carbide composition delivers a balance between wear resistance and fracture toughness, making the insert suitable for a wide range of steels and rostfreier Stahl (stainless steel). The PSF chipbreaker is designed to produce short, controllable chips under varied cutting conditions, which reduces the risk of entanglement and supports uninterrupted production. For applications where material composition changes frequently or where smaller tooling is used, this insert provides consistent performance and improved process reliability through enhanced edge stability and predictable tool life. Precise ISO fit for fast, repeatable set-up The rhombic VCMT 080204 geometry and ISO sizing ensure compatibility with standard holders; the insert’s cylindrical hole with a single-sided countersink (40°–60°) guarantees secure clamping and repeatable positioning. With a plate thickness of 2.38 mm and a nominal corner radius of 0.4 mm, the design offers a defined cutting edge for repeatability and predictable surface finish. These mechanical characteristics translate directly into reduced set-up times, consistent tolerances across batches and easier insertion into existing tool systems, making the component practical for both one-off and series production. Efficiency and process security for demanding turning tasks Designed for turning operations, the insert’s carbide substrate combined with the PVD layer provides a robust cutting edge that resists built-up edge and thermal degradation during extended runs. The engineered chip control reduces interruptions and cleaning cycles, so machining cycles become more economical. The ISO-standard geometry allows use with a wide range of external holders and boring bars; select the holder that matches the form, clearance angle and tolerance class to achieve best results. If further machining parameters or compatibility checks are required, our team at Metav Werkzeuge is available to provide technical guidance via the contact details below. Contact Metav Werkzeuge today for tailored machining recommendations on the Tungaloy VCMT080204-PSF AH725 insert and to arrange supply or application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6864892 Manufacturer SKU: TUN6864892 SKU: 6864892-Tungaloy Name: VCMT080204-PSF AH725 Material: Carbide Coating: PVD Facts Corner radius: 0.4 mm Clearance angle: 7° Included angle: 35° Thickness: 2.38 mm ISO designation: 080204 Plate size: 08 Special features PSF chipbreaker Rhombic VCMT geometry Cylindrical hole with single-sided countersink (40°–60°) Suited for external and internal turning Optimised for steel and rostfreier Stahl FAQ What materials is this insert suitable for? The VCMT080204-PSF AH725 insert from Tungaloy is optimised for machining steel and rostfreier Stahl, providing a balance of toughness and wear resistance for varied turning tasks. How does the PSF chipbreaker affect machining? The PSF chipbreaker on the VCMT080204-PSF AH725 promotes short, predictable chips, improving process security and reducing downtime for chip handling in turning operations. Which holders are compatible with this insert? Holders that accept ISO rhombic VCMT 080204 inserts and match the form, clearance angle and tolerance class are compatible; secure clamping is achieved via the cylindrical hole with single-sided countersink. What cutting edge radius and thickness does the insert offer? This indexable insert has a corner radius of 0.4 mm and a plate thickness of 2.38 mm, supplying a defined edge for repeatable finishes and dimensional control. Is the insert suitable for small-diameter tooling and high-security processes? Yes, the AH725 grade and PVD coating make the insert appropriate for smaller tooling and applications that demand high process security and consistent performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 080204 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of a coated cermet grade (GT9530), precise PF chip control, and a compact 0.4 mm corner radius to achieve consistently improved surface finish and extended tool life in stable turning operations. Order these indexable inserts directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. VCMT 080204 GT9530 – ISO turning indexable insert, coated cermet, PF chipbreaker — Tungaloy A VCMT080204-PF GT9530 ISO-format indexable insert for turning, optimised for finishing and light universal steel machining under stable conditions Coated cermet grade GT9530 PF chipbreaker for controlled chips Rhombic 08 geometry, 7° relief 0.4 mm corner radius for fine finish Higher productivity through enduring wear resistance The coated cermet composition of this insert, represented by the GT9530 grade, delivers a balance of hardness and toughness that is especially advantageous during finishing work on steel. Compared with conventional grades, the combination of a cermet cutting surface on a robust substrate supports longer tool life and more consistent part quality under steady cutting conditions. This results in fewer tool changes and a more predictable production flow, reducing downtime and increasing throughput without sacrificing the required surface integrity. Consistent chip control for repeatable process stability Equipped with a PF chipbreaker, this insert was designed to shape chips predictably during light turning operations. Consistent chip formation reduces the risk of surface damage and eases chip evacuation in both external and internal turning. The insert conforms to ISO dimensions and its compatibility with a toolholder depends on form, relief angle, tolerance class, fastening method, size and thickness; the rhombic 08 geometry and 7° relief angle help to maintain a steady cutting engagement and reliable seating in matching holders. Simple integration into existing turning systems The ISO-format construction means the insert integrates cleanly into standard holders or boring bars when the correct geometry and tolerance class are chosen. The cylindrical hole with a single-side countersink (40°–60°) secures the part on the clamping assembly while ensuring repeatable positioning. Because the insert is supplied to ISO norms, retrofitting typically requires only matching the holder form and tightening hardware, enabling minimal setup and fast return to production when replacements are required. Best-fit applications and practical material guidance This grade is intended as a wear-resistant finishing to light universal option for steel, offering superior surface finish where stable machining conditions are available. The cermet surface provides high abrasion resistance and a tendency to produce a fine machined appearance, which is why it is commonly specified where cosmetic quality and predictable tool life are priorities. For higher-demand scenarios or exotic alloys beyond standard steels, consider consulting tool selection guidelines or Metav Werkzeuge for an alternative grade better suited to that application. Contact Metav Werkzeuge for ordering advice on Tungaloy VCMT080204-PF GT9530 inserts, holder compatibility checks and practical machining recommendations Technical data Manufacturer article number: 6998402 SKU: 6998402-Tungaloy Brand: Tungaloy Facts Relief angle: 7° Included angle: 35° Plate thickness: 2.38 mm Corner radius: 0.4 mm Plate size: 08 ISO code: 080204 Special features Grade: GT9530 (coated cermet) Substrate material: cemented carbide Chipbreaker: PF Plate shape: rhombic Hole: cylindrical hole with single-side countersink (40°–60°) Series: ISO turning indexable inserts Typical application: external and internal turning FAQ What materials is this insert suitable for? The GT9530-coated cermet formulation is intended primarily for steel machining in finishing to light universal turning operations; the VCMT080204-PF is optimised for abrasion resistance and surface quality. Is this insert compatible with existing ISO holders? Compatibility depends on holder form, free/relief angle, tolerance class, fastening method, size and thickness; the VCMT080204-PF follows ISO dimensions, so matching the holder geometry and clamping hardware ensures proper fit. What chip control does the PF breaker provide? The PF chipbreaker promotes controlled, predictable chip formation ideal for finishing passes, reducing the risk of chip-related surface damage and easing chip evacuation. What is the corner radius and how does it affect surface finish? The corner radius is 0.4 mm, which supports a fine machined surface and helps to distribute cutting forces for consistent finish in stable conditions. Can this insert be used for roughing applications? VCMT080204-PF GT9530 is designed for finishing to light universal cutting; for heavy roughing operations a more robust geometry or different grade should be selected to withstand higher cutting forces and impact. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 080204 GT9530 Wendeplatten - Tungaloy
Optimise turning performance with the wear-resistant GT9530 cermet grade and the PSF chipbreaker for stable finishing and extended tool life. Order directly via Metav Werkzeuge or request application advice from our consultants. VCMT080204-PSF GT9530 ISO turning insert VCMT 080204 by Tungaloy The VCMT080204-PSF GT9530 is an ISO-standard rhombic turning insert designed for finishing and light universal turning on steel, delivering improved surface quality and dependable tool life. Cermet coating GT9530 for extended life PSF chipbreaker for stable finishing Rhombic insert 08 with 0.4 mm corner radius Enhanced finishing with wear-resistant cermet The combination of a coated cermet grade and a finely tuned chipbreaker produces a clean surface finish with fewer rework cycles. The GT9530 grade is engineered for wear resistance in finishing and light universal applications on steel, which translates into longer in‑process intervals and reduced tooling costs per component. The hardened substrate and coating system improve edge stability under steady, supported cutting conditions, enabling consistent dimensional results on external and internal turning tasks. Predictable chip control and secure clamping The PSF chipbreaker is designed to generate short, manageable chips under finishing depths of cut, reducing the risk of surface damage and improving machine uptime. The insert is ISO‑compliant; compatibility with a holder depends on form, clearance angle, tolerance class, fixing method, size and thickness, so selection of an appropriate clamping kit ensures reliable repeatability. The insert’s central hole with a one‑sided countersink supports secure mounting and consistent seat orientation in compatible toolholders, promoting process stability and operator confidence. Geometry that supports shop productivity A rhombic geometry in size 08 with a 0.4 mm corner radius and 2.38 mm plate thickness offers a balance between strength and fine finishing ability. The geometry and the 7° clearance angle favour low cutting forces and improved surface integrity when machining steels. The 35° lead angle assists in distributing cutting loads and helps to achieve a smooth cutting action, particularly in light turning passes. Using this insert within an ISO system—holder, shim and clamp—supports rapid changeover and predictable results across batch runs. For application-specific recommendations on the Tungaloy GT9530 grade or to place an order, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert guidance and availability. Technical data Article number: 6998406 SKU: 6998406-Tungaloy Manufacturer SKU: TUN6998406 Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Application: Turning Facts Corner radius: 0.4 mm Clearance angle: 7° Plate thickness: 2.38 mm Insert size: 08 ISO designation: 080204 Lead angle: 35° Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Grade/coating: GT9530 Chipbreaker: PSF Shape: rhombic With central hole for secure fixing Intended use: finishing and light universal turning on steel System components: insert, suitable external holder or boring bar, shim/clamp set and replacement screw FAQ Which materials is this insert suitable for? The GT9530 grade is formulated for machining steel, offering wear resistance and improved surface finish in finishing to light universal applications. What operations is the insert best for? This rhombic insert excels in external and internal turning where a good surface quality and longer tool life are priorities. How is compatibility with a toolholder determined? Compatibility is based on ISO form, clearance angle, tolerance class, fixing method, size and thickness; the insert’s central hole and countersink support standardised mounting in ISO holders. What does a 0.4 mm corner radius mean in practice? A 0.4 mm corner radius provides a compromise between edge strength and the ability to produce fine surface finishes; it reduces microchipping while maintaining good profile definition. How does the PSF chipbreaker affect machining? The PSF chipbreaker promotes short, controlled chips during finishing cuts, which lowers the chance of surface damage and eases chip evacuation in stable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 080204 NS9530 Wendeplatten - Tungaloy
VCMT 080204 NS9530 Drehwendeschneidplatte für Drehen von Tungaloy VCMT 080204 NS9530 ist eine ISO-genormte, rhombische Wendeschneidplatte für präzises Schlichten beim Außen- und Innendrehen ISO-genormt für zuverlässige Halterkompatibilität Schlichtsorte NS9530 für hohe Oberflächengüte Unbeschichtetes Cermet mit scharfer Schneidkante Rhombische Form 08 mit 0,4 mm Eckenradius Mit zylindrischem Loch und einseitiger Senkung Präzision und Oberflächengüte für Schlichtprozesse Die Wendeschneidplatte liefert konstante Oberflächengüte bei geringen Schnittkräften. Durch die NS9530-Sorte ergibt sich eine besonders scharfe Schneidkante, die kleine Zustellungen sauber abträgt und dadurch die Nachbearbeitung reduziert. Die rhombische Plattenform unterstützt stabile Kontaktverhältnisse am Werkstück, sodass beim Außen- und Innendrehen gleichmäßige Ergebnisse erreichbar sind. Einmal eingesetzte Platten zeigen reproduzierbare Leistung und erleichtern die Prozessplanung. Material und Schneidstoff: Vorteile des unbeschichteten Cermet Der verwendete Cermet verbindet die Härte eines Keramikwerkstoffs mit Zähigkeit ähnlich Hartmetall und sorgt für saubere Schnittflächen. Für das Schlichten von Stahl bietet die Sorte NS9530 niedrige Schnittkräfte und gute Kantenstabilität, was die Wärmeentwicklung reduziert und die Standzeit begünstigt. Zur Erklärung: Cermet ist ein Verbundwerkstoff aus keramischen Bestandteilen und Metallbindern; er eignet sich besonders für feine Oberflächen und kontinuierliche Schnittbedingungen. Einsatzempfehlung und Werkzeugauswahl Für den sicheren Einsatz sollte auf die Halterkompatibilität geachtet werden: Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke müssen passen. Die VCMT-Geometrie ist ideal für Schlichtoperationen mit kleinen Zustellungen; der PF-Spanbrecher unterstützt kontinuierliche Spanabfuhr bei stabilen Bearbeitungsbedingungen. Bei variabler Schnittführung empfiehlt sich die Abstimmung von Schnittwerten und Kühlschmierstoff, um optimale Oberflächen und Standzeiten zu erreichen. Wirtschaftlichkeit und Prozesssicherheit Die Kombination aus scharfer Schneidkante und stabiler Spanbildung reduziert Ausschuss und Nacharbeit, was die Produktivität steigert. Besonders in Serienfertigungen amortisiert sich der Einsatz durch reduzierte Maschinenlaufzeiten und verbesserte Wiederholgenauigkeit. Die ISO-Normierung erleichtert den Austausch und die Lagerhaltung, wodurch Rüstzeiten minimiert und Produktionsabläufe wirtschaftlich gestaltet werden können. Empfehlung: Die NS9530-Schlichtsorte von Tungaloy für präzise Schlichtprozesse einsetzen und bei Bedarf technische Beratung anfordern per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6998592 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT080204-PF NS9530 Hersteller SKU: TUN6998592 Fakten Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 7° Plattendicke: 2,38 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet Sorte: NS9530 — Schlichtsorte für Stahl Spanbrecher: PF — Schlicht-Spanbrecher Platte: VCMT080204-PF Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen Modellserie: ISO-Drehwendeschneidplatten FAQ Wie unterscheidet sich die NS9530-Sorte von beschichteten Sorten? Die NS9530-Sorte ist ein unbeschichtetes Cermet, das besonders scharfe Schneidkanten für feine Oberflächen liefert. Im Vergleich zu beschichteten Sorten bietet die VCMT080204-PF NS9530 oft bessere Oberflächenergebnisse beim Schlichten, benötigt aber angepasste Schnittwerte zur Optimierung der Standzeit. Für welche Werkstoffe ist diese Wendeschneidplatte geeignet? Die VCMT080204-PF NS9530 ist primär für die Bearbeitung von Stahl im Schlichtbereich ausgelegt und erzielt dort niedrige Schnittkräfte und hohe Oberflächengüten. Welche Halter sind kompatibel mit der VCMT080204-PF NS9530? Kompatibilität ergibt sich aus Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke. Für optimale Ergebnisse sollte ein Halter verwendet werden, der die rhombische Form 08 und die Plattendicke 2,38 mm unterstützt. Wie beeinflusst der PF-Spanbrecher die Spanbildung? Der PF-Spanbrecher ist für Schlichtoperationen ausgelegt und ermöglicht kontinuierliche Spanabfuhr bei stabilen Schnittbedingungen, was die Oberflächengüte verbessert und das Risiko von Riefen reduziert. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 080204 T5115 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide, the universal T5115 grade for cast iron and ISO compatibility to secure consistent turning performance; order via Metav Werkzeuge or consult the technical team for tailored recommendations. VCMT 080204 T5115 – VCMT080204-CM indexable insert for turning (Tungaloy) A VCMT080204-CM T5115 indexable insert designed for ISO-compliant external and internal turning, optimised for cast iron with a balanced mix of wear resistance and edge stability CVD-coated carbide grade T5115 ISO rhombic 08 geometry 0.4 mm corner radius Cylindrical hole with 40°–60° countersink Consistent edge life through CVD-coated carbide for cast iron The combination of CVD-coated carbide and the T5115 grade delivers a reliable balance of wear resistance and edge stability for turning cast iron. The chemical vapour deposition layer reduces flank wear while maintaining a robust cutting edge, which translates into longer tool life and fewer index changes. This effect is particularly beneficial in production environments where predictable service intervals and reduced downtime increase overall throughput and cost-efficiency. ISO compatibility and secure clamping for repeatable machining The ISO rhombic form and standard dimensions ensure compatibility with a wide range of turning holders and boring bars. Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; the insert features an 08 size, a 7° relief angle and a cylindrical hole with a single-sided countersink (40°–60°), allowing secure seating and consistent orientation. These mechanical interfaces simplify tool inventory management and help maintain repeatable cutting conditions across different machines and setups. Practical system integration and application benefits Designed for both external and internal turning operations, the insert uses the CM chipbreaker for controlled chip formation when machining cast iron. Its 0.4 mm corner radius supports light to medium finishing passes, producing a reliable surface quality while minimising edge chipping. Integration into a standard system—indexable insert, compatible external holder or boring bar, shim/clamp set and replacement screws—means fast changeovers and straightforward spare-part planning. The result is stable process behaviour, efficient material removal and measurable productivity improvements on the shop floor. Contact Metav Werkzeuge for application-specific advice and to order the Tungaloy VCMT080204-CM T5115 indexable insert; Metav Werkzeuge’s consultants will recommend the optimum holder, chipbreaker and inventory solution for each application Technical Data Article number: 6864807 Manufacturer SKU: TUN6864807 SKU: 6864807-Tungaloy Designation: VCMT080204-CM T5115 Model series: ISO turning indexable inserts Application: Turning Facts Size: 08 Corner radius: 0.4 mm Thickness: 2.38 mm Relief angle: 7° Lead/approach angle: 35° Countersink angle: 40°–60° Special features Material: CVD-coated carbide (T5115) Chipbreaker: CM Shape: rhombic Hole style: cylindrical hole with single-sided countersink (40°–60°) System compatibility: ISO turning holders, shim/clamp sets and replacement screws Typical use: External and internal turning; suited to cast iron FAQ What materials is this insert best suited for? The VCMT080204-CM T5115 insert is optimised as a universal grade for cast iron, offering a balanced combination of wear resistance and edge stability for this material family. Can the insert be used for both external and internal turning? Yes, the insert is designed for both external and internal turning operations; the ISO form and mounting hole permit use in compatible external holders and boring bars. How does the CM chipbreaker affect machining? The CM chipbreaker promotes stable chip formation when machining cast iron, improving chip control and contributing to consistent surface finish and process reliability. Which dimensions and angles are critical when selecting a holder? Key values are size 08, thickness 2.38 mm, corner radius 0.4 mm, relief angle 7° and lead angle 35°; matching these with the holder’s geometry ensures correct seating and clamping. What system components are recommended with this insert? Use the insert together with ISO-compatible external holders or boring bars, the appropriate shim/clamp set and replacement screws to guarantee secure clamping and repeatable results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 080204 T9215 Wendeplatten - Tungaloy
VCMT 080204 T9215 Drehwendeschneidplatte von Tungaloy für Drehen (35°) Die VCMT080204-PSF T9215 ist eine ISO-genormte Drehwendeschneidplatte für das Drehen, konzipiert für mittlere Stahlbearbeitung und hohe Serienproduktivität CVD-beschichtetes Hartmetall für hohe Standzeit Optimierter Spanformer PSF für stabile Spanbildung Rhombische Plattenform 08 mit 7° Freiwinkel Zylindrisches Loch mit einseitiger Senkung Eckenradius 0,4 mm für präzise Konturarbeit Höhere Produktivität durch verschleißfesten Schneidstoff Die VCMT080204-PSF T9215 kombiniert Hartmetall mit einer CVD-beschichtung, die den Verschleißwiderstand deutlich erhöht und so längere Einsatzintervalle ermöglicht. Durch die gesteigerte Standzeit reduziert sich die Rüst- und Stillstandszeit in der Fertigung, wodurch die Produktivität bei kontinuierlichen und leicht unterbrochenen Schnitten steigt. Die Geometrie ist ausgelegt, um konstante Schnittbedingungen und gleichbleibende Oberflächenqualitäten zu liefern. Präzise Geometrie für zuverlässige Prozessstabilität Die rhombische Plattenform in Größe 08 mit einem Eckenradius von 0,4 mm unterstützt genaue Radiusführung bei Außen- und Innendrehoperationen. Der Freiwinkel von 7° und die Plattendicke von 2,38 mm sorgen für eine stabile Auflage im Halter; das zylindrische Loch mit einseitiger Senkung (40°–60°) gewährleistet sichere Befestigung und zuverlässige Spanabfuhr. Diese Kombination trägt zur hohen Prozesssicherheit bei und erleichtert die Integration in vorhandene ISO-kompatible Haltersysteme. Zielorientierte Anwendung für Werkstatt und Serienfertigung Als erste Wahl für die mittlere Stahlbearbeitung ist die Sorte T9215 besonders für Anwender geeignet, die auf Wirtschaftlichkeit und konstante Ergebnisse Wert legen. In Kombination mit einem passenden Außenhalter, Unterlage und Klemmsatz sowie der richtigen Schraubenbefestigung bietet die Wendeschneidplatte eine robuste Lösung für wiederholgenaue Bearbeitung. Spanformer PSF empfiehlt sich für kontrollierte Spanbildung bei moderaten bis hohen Schnittkräften. Empfehlung: Die VCMT080204-PSF T9215 von Tungaloy ist ideal für produktive Stahlzerspanung — Bestellungen und technische Beratung über Metav Werkzeuge, E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Leistungsmerkmale Artikelnummer: 6773989 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT080204-PSF Hersteller SKU: TUN6773989 SKU: 6773989-Tungaloy Fakten Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 7° Plattendicke: 2,38 mm Plattengröße: 08 Radius: 0,4 Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet Sorte: T9215 Spanbrecher: PSF Plattenform: rhombisch Loch: mit Loch — zylindrisches Loch + einseitige Senkung (40°–60°) Einsatzgebiet: Drehen Wendeplattenbezeichnung: VCMT080204-PSF Systemaufbau: ISO-Drehplatte, passender Außenhalter, Unterlage/Klemmsatz, Ersatzschrauben FAQ Für welche Werkstoffe ist die Platte geeignet? Die VCMT080204-PSF T9215 von Tungaloy (SKU 6773989-Tungaloy) wurde primär für die Bearbeitung mittlerer Stähle entwickelt und liefert dort in kontinuierlichen und leicht unterbrochenen Schnitten sehr gute Ergebnisse. Welche Vorteile bringt die CVD-Beschichtung? Die CVD-beschichtung der Sorte T9215 erhöht die Verschleißfestigkeit und verbessert die thermische Beständigkeit, wodurch die Tungaloy Wendeschneidplatte länger standfest bleibt und konstante Oberflächengüten ermöglicht. Ist die Platte mit Standard-Haltern kompatibel? Die ISO-genormte Geometrie der VCMT080204-PSF sorgt für hohe Kompatibilität; entscheidend sind jedoch Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke des Halters, um optimale Halterauflage und Fixierung zu gewährleisten. Wann sollte der Spanformer PSF verwendet werden? Der Spanformer PSF empfiehlt sich bei mittleren Stählen und Prozessen, die stabile Spanbildung und kontrollierte Spanabfuhr erfordern, insbesondere bei Serienfertigung mit kontinuierlichen oder leicht unterbrochenen Schnitten. Welche Geometrieparameter sind für die Auswahl wichtig? Wichtige Parameter sind der Eckenradius 0,4 mm, der Freiwinkel 7°, die Plattendicke 2,38 mm sowie die rhombische Form in Größe 08; diese Werte beeinflussen Schnittkraft, Oberflächenqualität und Halterstabilität. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 080204 T9225 Wendeplatten - Tungaloy
Combining the T9225 CVD coating with a robust PSF chipbreaker and a 0.4 mm corner radius delivers a balance of toughness and surface quality for medium to heavy steel turning; order the VCMT080204-PSF T9225 directly via Metav Werkzeuge or consult our specialists for application guidance. VCMT 080204 T9225 — ISO turning insert for medium to heavy steel turning — Tungaloy VCMT080204-PSF T9225 is an ISO-standard rhombic indexable insert designed for external and internal turning with enhanced toughness for interrupted cuts CVD-coated carbide T9225 PSF chipbreaker for varied cuts ISO VCMT 080204 rhombic insert Cylindrical hole with 40°–60° countersink Improved process stability and predictable productivity The CVD-coated T9225 grade is formulated for reliable performance in medium to heavy steel turning where changing engagement conditions and light interruptions occur. The combination of a tough carbide core and a wear-resistant coating increases productive cutting time and reduces unplanned tool changes, which supports steady cycle times and cost-efficient machining. The PSF chipbreaker promotes controlled chip formation during continuous and interrupted cuts, contributing to consistent surface quality and fewer secondary operations. Easy integration with ISO holders and clear compatibility criteria The VCMT080204-PSF geometry follows ISO conventions, so insertion into a matching holder is straightforward when form, relief angle, tolerance class, clamping method, size and thickness are observed. The designation reflects the rhombic shape and the key dimensions: size 08, thickness 2.38 mm and corner radius 0.4 mm, together with a relief angle of 7°; these parameters determine seating, runout tolerance and secure clamping. Specifying the matching external holder or boring bar with compatible seat and fastening ensures repeatable positioning and safe cutting forces. Robust coating and chip control for consistent surface finish A CVD-coated carbide construction offers a hard, thermally stable surface that resists abrasive wear while retaining sufficient toughness for interrupted cuts. The PSF chipbreaker is optimised for steel machining and reduces the risk of long, entangling chips, improving both productivity and operator safety. For general workshop setups, this insert supports a compromise between tool life and finish: choose the T9225 grade and PSF geometry where durability is required without sacrificing acceptable surface integrity in medium to heavy turning operations. Contact Metav Werkzeuge for tailored application advice on Tungaloy inserts or request sample trial recommendations to match the VCMT080204-PSF T9225 to specific turning tasks Technical data Article number: 6781012 Manufacturer SKU: TUN6781012 SKU: 6781012-Tungaloy Model series: ISO turning inserts Label: VCMT080204-PSF T9225 Facts Geometry code: 080204 Size: 08 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 35° Special features Grade: T9225 Chipbreaker: PSF Material: carbide Shape: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) FAQ What materials is this insert suitable for? The VCMT080204-PSF T9225 is aimed primarily at steel turning applications; the T9225 grade is a robust universal choice for medium to heavy steel machining where interrupted cuts or variable engagement are expected. How does the PSF chipbreaker affect performance? The PSF chipbreaker on the VCMT080204-PSF promotes short, controlled chips during a range of cutting conditions, improving chip evacuation and reducing the likelihood of surface damage during turning operations. Which holders are compatible with this ISO insert? Compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness; matching these parameters with the chosen holder or boring bar ensures the VCMT080204-PSF seats correctly and performs reliably. How important is the 0.4 mm corner radius? The 0.4 mm corner radius balances edge strength and surface finish: it increases resistance to edge breakage under heavier cuts while still allowing acceptable surface integrity for general turning tasks. Is the coating suitable for interrupted cuts? Yes, the CVD-coated T9225 grade retains toughness for lightly interrupted cuts and changing engagement, offering a compromise between wear resistance and fracture resistance for demanding conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110302 AH6225 Wendeplatten - Tungaloy
Benefit from consistent medium‑finish turning performance through the combination of a PVD‑coated carbide grade and a proven chipbreaker geometry: the design supports a sharp, stable cutting edge, repeatable tool life and reliable chip control for stainless steels. Order the VCMT110302‑TSF AH6225 directly via Metav Werkzeuge or ask the consultants for application advice. VCMT110302-TSF AH6225 — ISO turning indexable insert, PVD‑coated carbide, 0.2 mm radius (Tungaloy) The VCMT110302-TSF AH6225 is an ISO‑standard rhombic turning insert optimised for medium finishing of stainless steels with a TSF chipbreaker for improved chip control. ISO‑standard rhombic insert form PVD‑coated carbide AH6225 TSF chipbreaker for stainless steels 0.2 mm nose radius for precision Consistent edge life and surface quality for stainless‑steel turning The PVD‑coated AH6225 grade pairs a hard, wear‑resistant coating with a tough substrate to keep the cutting edge sharp while resisting chipping under variable conditions. Used in medium finishing applications, the geometry is designed to maintain a stable edge, which translates into predictable tool life and improved component surface finish. For workshops transitioning between batches or mixed stainless‑steel alloys, this combination reduces the need for frequent insert changes and supports steady cycle times. Precise chip control and dimensional accuracy on the component The TSF chipbreaker is optimised for the ductile behaviour of stainless steels, promoting short, controllable chips that reduce entanglement and help maintain process security. The 0.2 mm nose radius and 35° lead angle support accurate profile reproduction and tight dimensional tolerances, while the rhombic form provides versatile cutting directions. Because the insert is ISO‑standard, holders are selected based on form, relief angle, tolerance class, fixing method, size and thickness to ensure correct seating and clamping in the tool system. Practical system integration and application guidance This item is supplied as an ISO turning insert intended for use with a matching outer holder or boring bar, plus the requisite underlay/clamping set and replacement screws for secure fixation. The 3.18 mm thickness and the with‑hole design — a cylindrical hole with a one‑sided countersink (40°–60°) — ensure reliable mounting and repeatable positioning. For routine shopfloor decisions: choose the TSF breaker and AH6225 grade where stability is moderate and surface quality is a priority; select alternative breakers or grades where heavy interrupted cuts or harder materials are present. For ordering or detailed application recommendations on Tungaloy PVD‑coated grades, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and compatibility with existing toolholders. Technical data Article number: 6951527 Manufacturer SKU: TUN6951527 SKU: 6951527‑Tungaloy Label: VCMT110302‑TSF AH6225 Facts ISO designation: 110302 Shape: rhombic Size: 11 mm Thickness: 3.18 mm Nose radius: 0.2 mm Relief angle: 7° Lead angle: 35° Special features Grade: AH6225 (PVD‑coated carbide) Chipbreaker: TSF Hole: with hole — cylindrical hole + one‑sided countersink (40°–60°) Application: turning (external and internal) Model series: ISO turning indexable inserts Compatible system: outer holder or boring bar, clamp set and screws FAQ What materials is the VCMT110302‑TSF AH6225 optimised for? The VCMT110302‑TSF AH6225 insert from Tungaloy is optimised for machining stainless steels, providing a balance of wear resistance and edge stability for medium finishing operations. Which toolholders are compatible with this insert? Compatibility for the VCMT110302‑TSF AH6225 is determined by the insert form, relief angle (7°), tolerance class, fixing method, size (11 mm) and thickness (3.18 mm); matching ISO‑compliant external holders or boring bars are recommended. How does the TSF chipbreaker affect chip formation? The TSF chipbreaker on the VCMT110302‑TSF AH6225 promotes short, controllable chips when turning stainless steels, improving process security and reducing the likelihood of chip entanglement. Can this insert be used for internal and external turning operations? Yes — the VCMT110302‑TSF AH6225 is designed for both external and internal turning; selection of the correct holder and clamping set is essential to achieve the intended cutting performance. What mounting details are relevant for setup? The VCMT110302‑TSF AH6225 features a cylindrical hole with a one‑sided countersink (40°–60°) to ensure secure mounting; use the appropriate underlay and clamp set plus replacement screws to guarantee repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110302 AH6225 Wendeplatten - Tungaloy
Combine reliable PVD coating, a sharp yet stable cutting edge and a compact 0.2 mm corner radius for consistent mid-range turning performance; order the VCMT110302-TM AH6225 directly via Metav Werkzeuge or consult our specialists for application guidance. VCMT 110302 AH6225 turning insert by Tungaloy — PVD‑coated carbide, TM chipbreaker VCMT110302-TM AH6225 is a precision ISO rhombic turning insert for external and internal turning, designed for reliable performance in varying conditions. PVD-coated carbide AH6225 ISO VCMT 110302 rhombic insert 7° clearance angle for stable cutting TM chipbreaker tuned for rostfreier Stahl Greater process stability through material and coating The combination of a PVD‑coated surface and a carbide substrate ensures consistent tool behaviour during medium turning tasks. The PVD layer reduces adhesion and improves resistance against built‑up edge, while the cemented carbide core retains edge integrity under intermittent cutting. This results in more predictable wear patterns and fewer unplanned tool changes, which supports stable production cycles and better component repeatability. Optimised geometry for improved chip control and surface finish The TM chipbreaker, matched to the plate geometry, is engineered for effective chip formation when machining rostfreier Stahl. The ISO rhombic form and the 35° lead angle promote favourable cutting directions on both external and internal operations, allowing smooth chip evacuation and reduced cutting forces. As a result, the insert contributes to improved surface quality with controlled chip behaviour during shoulder and contour turning. Precision dimensions that aid fixture compatibility and repeatability With a 0.2 mm corner radius, 3.18 mm thickness and 11 mm inscribed circle, the insert provides a defined cutting edge for dimensional control. These measured values support predictable engagement parameters when paired with compatible toolholders. Compatibility to a holder is determined by form, clearance angle, tolerance class, fixing method, size and thickness, so matching the insert dimensions preserves clamping security and repeatable set‑ups in production. Economic tool life and mid‑range performance balance The AH6225 grade is formulated as a universal choice for stainless applications, balancing a sharp cutting edge with robustness for changing conditions. This grade aims for good wear resistance without sacrificing edge strength, making it suitable for medium cutting depths and feeds where cost per part and consistent tool life are key considerations. Selection of the right chipbreaker and cutting data will extend the service life and lower overall machining costs. For specific application advice on the AH6225 grade or to reserve VCMT110302-TM inserts via Metav Werkzeuge, contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6951563 Manufacturer SKU: TUN6951563 Marketplace SKU: 6951563-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: VCMT110302-TM AH6225 Facts Inscribed circle: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 7° Lead angle: 35° ISO code: 110302 Special features Material: carbide (cemented carbide) Coating: PVD Chipbreaker: TM Plate form: rhombic Hole: with hole; cylindrical hole + single‑side countersink (40°–60°) Typical application: turning (external and internal) Grade focus: universal for rostfreier Stahl FAQ What materials is this insert suitable for? The VCMT110302-TM AH6225 grade is designed primarily for rostfreier Stahl and performs well in a range of stainless applications thanks to its PVD coating and chipbreaker geometry. How is holder compatibility determined for these inserts? Compatibility depends on the insert form, clearance angle, tolerance class, fixing method, size and thickness; the VCMT110302-TM format follows ISO specifications to match standard turning holders. What advantages does the AH6225 grade provide versus uncoated grades? The PVD‑coated AH6225 offers improved adhesion resistance and wear control compared with uncoated grades, delivering steadier tool life and fewer interruptions in mid‑range turning tasks. Which chipbreaker should be selected for continuous stainless turning? The TM chipbreaker on this insert is tuned for controlled chip formation when machining rostfreier Stahl, making it a solid choice for many continuous and semi‑continuous turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110302 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated carbide grade (AH6225) and a PS chipbreaker that combine sharpness with edge stability for reliable performance in medium turning operations; order the insert directly via Metav Werkzeuge or contact our consultants for application guidance. VCMT 110302 AH6225 ISO rhombic indexable insert for turning — Tungaloy The VCMT110302-PS AH6225 is an ISO‑standard rhombic indexable insert designed for external and internal turning, optimised for medium finishing and interrupted cuts in stainless steels. ISO rhombic insert, 11 mm size PVD‑coated carbide AH6225 Suitable for stainless steels PS chipbreaker for stable chip control Consistent cutting edge for stainless‑steel turning The PVD‑coated carbide of grade AH6225 delivers a balance between sharpness and wear resistance, yielding a consistently productive cutting edge during medium turning. For materials with work‑hardening tendencies, the coating reduces adhesion and thermal loading while the carbide substrate maintains edge integrity. This results in fewer unscheduled tool changes and a steadier surface finish, supporting predictable cycle times in mixed‑batch production. Stable chip control reduces interruptions The PS chipbreaker is shaped to produce short, controllable chips under varying feed and depth conditions, lowering the risk of entanglement and rework. Good chip formation improves process security and reduces manual intervention at the machine, which in turn raises effective spindle utilisation. For users pursuing reliable machining sequences, this chip geometry promotes safer swarf handling and more consistent part quality. ISO compatibility and secure mounting for system integration Designed as part of the ISO‑standard turning insert system, the insert’s rhombic form, 11 mm size, and 3.18 mm thickness match widely used external holders and boring bars. The insert features a cylindrical hole with a single‑sided countersink (40°–60°) for secure clamping; compatibility with a holder is determined by form, relief angle, tolerance class, fastening method, size and thickness. This clarity simplifies tool selection and reduces setup uncertainty on standard toolposts. Productivity benefits for production environments Adopting a universal grade such as AH6225 with a dedicated chipformer helps to extend average tool life while maintaining surface quality in series and job‑shop work. The insert supports steady machining in changing conditions, which can contribute to lower tooling costs per part and a smoother production flow. For application advice and optimisation strategies, Metav Werkzeuge’s technical team can be consulted to align cutting data and holder selection with the specific workpiece and machine rigidity. For tailored advice on integrating the AH6225 grade into existing turning workflows, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt, application‑oriented support Technical data Article number: 6903348-Tungaloy Manufacturer SKU: TUN6903348 Manufacturer item number: 6903348 Label: VCMT110302-PS AH6225 Model series: ISO‑Drehwendeschneidplatten Core specifications Size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Clearance (relief) angle: 7° Approach angle: 35° Hole: with cylindrical hole and single‑sided countersink (40°–60°) Materials & features Schneidstoff: PVD‑coated carbide (AH6225) Chipbreaker: PS Shape: rhombic Application: external and internal turning Typical use: medium machining of stainless steels System: ISO‑standard turning insert system FAQ What turning applications is this insert designed for? The VCMT110302‑PS AH6225 insert is intended for external and internal turning in medium machining operations, especially where stainless steels are processed. Which holders are compatible with this insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic 11 mm form fits standard ISO holders designed for VCMT‑type inserts. What advantage does the AH6225 grade provide? The AH6225 PVD‑coated carbide combines a sharp cutting edge with stability under variable conditions, offering improved wear resistance and reliable performance on rostfreie Stähle. How does the PS chipbreaker affect machining? The PS chipbreaker promotes controllable chip formation and reduced swarf issues, contributing to fewer interruptions and steadier surface finishes. What identification numbers are relevant for reordering? Reference the manufacturer item number 6903348 or the manufacturer SKU TUN6903348 when reordering the VCMT110302‑PS AH6225 insert. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 110302 AH6235 Wendeplatten - Tungaloy
Taking advantage of the PVD-coated AH6235 grade and the PS chipbreaker, this insert delivers reliable performance for turning operations in stainless steels and interrupted cuts; order the required items directly via Metav Werkzeuge or consult the technical team for application-specific setup and matching holders. VCMT 110302 AH6235 VCMT turning insert by Tungaloy — PVD-coated carbide, PS chipbreaker, 0.2 mm radius VCMT110302-PS AH6235 is an ISO-format rhombic turning insert designed for external and internal turning applications where toughness and controlled chip formation are required PVD-coated carbide grade AH6235 for toughness and life Optimised PS chipbreaker for controlled chips Rhombic ISO 11 format, 0.2 mm corner radius Cylindrical hole with single-sided countersink 40°–60° Higher productivity when machining stainless steels The combination of a PVD-coated, wear-resistant surface and a tougher carbide substrate provides improved cutting-edge stability in the machining of stainless steel. The selected grade reduces the risk of edge chipping during interrupted cuts and under higher mechanical loads, which translates into fewer tool changes and more consistent cycle times. For production environments where reproducible component quality matters, the enhanced toughness supports longer insert life and steadier process output. Consistent chip control for safer, cleaner turning Equipped with the PS chipbreaker, the insert promotes short, broken chips under typical turning parameters, reducing the chance of entanglement and improving swarf handling. Controlled chip formation contributes directly to surface quality and repeatable part finish, while lowering the risk of built-up edge on stainless materials. Process reliability is therefore improved, particularly in mixed-batch or semi-finished production where stable chip evacuation is essential. Fast set-up and assured compatibility with ISO systems The insert follows ISO geometry in a rhombic 11 format with an inscribed circle of 11 mm, a 0.2 mm corner radius and a plate thickness of 3.18 mm; mounting is via a cylindrical hole with single-sided countersink (40°–60°). Compatibility with a holder is determined by form, clearance angle, tolerance class, fixing method, size and thickness — matching these parameters ensures secure clamping and repeatable seating. Specifying the correct clamping components and replacement screws reduces downtime and supports stable cutting conditions. Practical guidance for efficient turning operations For external and internal turning, select a robust holder and set feeds and speeds to account for the tougher grade and the workpiece material. The 7° clearance and the insert geometry favour reliable engagement in unstable cuts; the combination of grade and chipformer makes this insert suitable for interrupted cuts and operations with heightened breakout risk. The VCMT110302-PS AH6235 insert is therefore well suited to shops seeking predictable tool behaviour and reduced scrap rates when processing challenging stainless alloys. For application advice or to order Tungaloy VCMT110302-PS AH6235 inserts, contact Metav Werkzeuge for technical consultation and fast supply — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6903520 Manufacturer SKU: TUN6903520 Model series: ISO turning inserts ISO designation: VCMT110302-PS Manufacturer: Tungaloy Facts Corner radius: 0.2 mm Insert thickness: 3.18 mm Inscribed circle / size: 11 mm Clearance angle: 7° Insert angle: 35° Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Material: carbide Coating: PVD Grade: AH6235 (tough grade for stainless steels, interrupted cuts) Chipbreaker: PS Plate form: rhombic Typical application: external and internal turning FAQ What materials is the VCMT110302-PS AH6235 best suited for? The VCMT110302-PS AH6235 is optimised for stainless steel and applications with interrupted cuts or higher breakout risk; the AH6235 grade offers enhanced toughness for these conditions. How does the PS chipbreaker affect machining performance? The PS chipbreaker on the VCMT110302-PS AH6235 produces short, controlled chips to improve swarf evacuation, enhance surface finish and reduce built-up edge on difficult-to-machine alloys. Which holder parameters must be matched to ensure compatibility? Compatibility requires matching form, clearance angle (7°), tolerance class, fixing method, plate size (11 mm) and thickness (3.18 mm) to the holder specified for ISO rhombic inserts. Is the coating type specified for this insert and what is its benefit? The insert uses a PVD coating, providing improved wear resistance and thermal stability that supports longer cutting life in demanding stainless-steel operations. Can this insert handle interrupted cuts and unstable engagements? Yes — the AH6235 grade combined with the PS chipbreaker and the 0.2 mm corner radius offers improved edge stability for interrupted cuts and situations with elevated breakout potential. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110302 AH725 Wendeplatten - Tungaloy
VCMT 110302 AH725 ISO-Drehwendeschneidplatte zum Drehen — Tungaloy VCMT 110302 AH725 ist eine ISO-genormte rhombische Drehwendeschneidplatte für präzises Außen- und Innendrehen mit optimierter Spanbildung. VCMT110302-PS AH725 ISO-genormte Wendeschneidplatte Universelle PVD-Beschichtung für Stahl und rostfreie Stähle Ausbruchfeste Sorte für hohe Prozesssicherheit Rhombische Form, Freiwinkel 7° für stabile Schnitte Zylindrisches Loch mit einseitiger Senkung (40°–60°) Höhere Prozesssicherheit bei wechselnden Werkstoffen Für Bearbeitungen, bei denen Werkstoffwechsel und variierende Stabilität auftreten, bietet die VCMT110302-PS AH725 zielgerichtete Vorteile. Die ausbruchfeste Sorte AH725 reduziert unvorhersehbare Ausbrüche an der Schneidkante und sorgt so für konstante Zyklenzeiten. Durch die Kombination aus PVD-Beschichtung und robustem Hartmetall wird die Standzeit verbessert, was die Wirtschaftlichkeit in Serien- und Einzelteilfertigungen erhöht. Material und Beschichtung: langlebig und vielseitig Die Platte besteht aus Hartmetall mit PVD-Beschichtung, wodurch Verschleiß verringert und die Oberflächengüte verbessert wird. Diese Kombination ist besonders vorteilhaft beim Drehen von Stahl und rostfreien Stählen, da die Beschichtung die Wärmebeständigkeit und die Kantenschärfe unterstützt. Für Anwender, die Prozesssicherheit priorisieren, bedeutet das weniger Nacharbeit und stabilere Bearbeitungsergebnisse. Konstruktion, Geometrie und Schneidvorteile Die rhombische Plattenform mit einem Eckenradius von 0,2 mm und einem Freiwinkel von 7° wurde entwickelt, um sicheres Spanverhalten und kontrollierte Spanabfuhr zu ermöglichen. Der eingebrachte Spanbrecher PS ist auf die Sorte abgestimmt und optimiert die Spanform für typische Drehanwendungen. Anwender profitieren von besserer Maßhaltigkeit und gleichmäßiger Oberfläche bei geringer Schneidenbelastung. Einbau und Kompatibilität in der Praxis Die VCMT110302-PS AH725 ist ISO-genormt; die Kompatibilität zum Halter richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Das zylindrische Loch mit einseitiger Senkung erleichtert die sichere Fixierung auf gängigen Außenhaltern oder Bohrstangen. Vor dem Einsatz empfiehlt sich ein Abgleich mit dem Halterdiagramm, um optimale Stabilität und Wiederholgenauigkeit zu gewährleisten. Zielgruppe und typische Einsatzfelder Entwickelt für Zerspanungsbetriebe und Werkstätten, die vielseitige und prozesssichere Lösungen suchen, eignet sich diese Platte besonders für Anwender mit wechselnden Werkstoffen und hohen Anforderungen an Standzeit und Oberflächengüte. Typische Anwendungen sind Außen- und Innendrehen bei Serienfertigung, Lohnfertigung und Prototypenbau. Empfehlung: Für zuverlässige und wirtschaftliche Drehbearbeitung mit hoher Prozesssicherheit empfiehlt sich die VCMT110302-PS AH725 von Tungaloy; bei Fragen steht die technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung Produktmerkmale Artikelnummer: 6856691 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6856691 Bezeichnung: VCMT110302-PS AH725 Fakten Eckenradius: 0,2 mm Freiwinkel: 7° Plattendicke: 3,18 mm Plattengröße: 11 Winkel: 35° Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall (PVD = physikalische Gasphasenabscheidung) Sorte: AH725 (universelle, ausbruchfeste Sorte) Spanbrecher: PS (PS = Spanformungsgeometrie für kontrollierte Spanabfuhr) Plattenform: rhombisch Lochausführung: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) FAQ Welche Werkstoffe lassen sich mit der VCMT110302-PS AH725 bearbeiten? Die VCMT110302-PS AH725 von Tungaloy eignet sich insbesondere für Stahl und rostfreie Stähle; durch die AH725-Sorte ist außerdem eine breite Werkstoffabdeckung gegeben. Wie beeinflusst die PVD-Beschichtung die Standzeit? Die PVD-Beschichtung der VCMT110302-PS AH725 reduziert Verschleiß und verbessert die Wärmebeständigkeit, wodurch die Standzeit unter typischen Drehbedingungen steigt. Welchen Vorteil bietet der Spanbrecher PS? Der Spanbrecher PS optimiert die Spanform und erleichtert die Spanabfuhr, was die Prozessstabilität beim Außen- und Innendrehen erhöht. Welche Rolle spielt der Freiwinkel 7° in der Anwendung? Ein Freiwinkel von 7° ermöglicht eine ausgewogene Schnittgeometrie mit reduzierter Schneidenbelastung und trägt zu stabilen Schnitten und guter Oberflächengüte bei. Ist die Platte mit Standard-Außenhaltern kompatibel? Ja, die VCMT110302-PS AH725 ist ISO-genormt; Kompatibilität hängt jedoch von Form, Befestigung und Toleranzen des jeweiligen Halters ab. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110302 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of reliable process security, PVD-coated cemented carbide grade AH725, and a compact rhombic geometry to keep turning operations productive and predictable; order the inserts directly via Metav Werkzeuge or consult our specialists for application advice. VCMT 110302 AH725 ISO turning insert for Drehen – Tungaloy A VCMT110302-PSF AH725 is an ISO‑conforming rhombic turning insert designed for general external and internal turning applications where consistent chip control and wear resistance are required ISO‑conforming rhombic insert PVD‑coated AH725 grade PSF chipbreaker for controlled chips Suitable for Stahl and rostfreier Stahl High process reliability through a universal PVD‑coated grade The combination of a PVD‑coated surface with the AH725 cemented carbide substrate provides a balance between wear resistance and toughness, making this insert particularly effective where mixed batches or frequent material changes occur. The PVD layer reduces adhesion and improves surface finish, while the carbide core maintains a robust cutting edge under varying cutting conditions. This results in predictable tool life and fewer interrupted cycles, which supports continuous production and lowers overall process variability. Clear geometry and compatibility for straightforward set‑up Designed as an ISO standard rhombic insert, the geometry and tolerances ensure compatibility with a wide range of ISO holders. The insert features a 0.2 mm corner radius, a 7° clearance angle and a nominal 35° cutting angle, with a plate thickness of 3.18 mm and a size designation of 11 mm; these dimensional details make selection and clamping straightforward. The mounting hole is present with a cylindrical hole plus one‑sided countersink (40°–60°), which helps secure the insert reliably and ensures repeatable seating in the clamping set. Effective chip control and application scope The PSF chipbreaker is engineered to break and evacuate chips consistently during both external and internal turning, especially on small tools or when high process security is required. The AH725 grade is described as universal and fracture‑resistant, suitable for machining Stahl and rostfreier Stahl, offering a practical solution where moderate to demanding cutting conditions appear. By choosing an insert with an appropriately matched chipbreaker and grade, cycle times can be optimised and the need for secondary operations reduced. Practical system considerations and identification The insert is part of an ISO turning system consisting of the ISO turning insert, a corresponding external holder or boring bar, backing/wedge and replacement screws; selecting the correct holder form, clearance and tolerance class is essential for optimum performance. The article is listed under the designation VCMT110302‑PSF AH725 and is traceable via the manufacturer SKU. Clear labelling and the ISO system approach simplify tool inventory and replacement, supporting efficient workshop logistics and minimising downtime. Choose the Tungaloy AH725 grade for secure, versatile turning and contact Metav Werkzeuge for application recommendations or availability; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best insert configuration for the specific turning task Technical data Article number: 6864866-Tungaloy Manufacturer SKU: TUN6864866 Manufacturer article number: 6864866 Designation: VCMT110302-PSF AH725 Model series: ISO-Drehwendeschneidplatten Facts Plate size: 11 mm Plate thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 7° Cutting angle: 35° Special features Material: cemented carbide Coating: PVD Grade: AH725 Chipbreaker: PSF Plate shape: rhombic Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Application: Drehen System: ISO‑conforming insert for ISO holders FAQ What materials is this insert suitable for? The insert is intended for turning Stahl and rostfreier Stahl, with the AH725 grade offering a universal, fracture‑resistant performance in these materials. How is the VCMT110302‑PSF secured in the holder? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) for positive seating and clamping in compatible ISO holders. What advantages does the PVD coating provide? The PVD‑coated surface on the cemented carbide improves wear resistance and reduces built‑up edge, helping to maintain surface finish and extend effective tool life for the VCMT110302‑PSF AH725. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110302 AH8005 Wendeplatten - Tungaloy
Take advantage of a wear‑resistant, PVD‑coated carbide grade combined with a fine 0.2 mm corner radius for consistent surface finish and reliable chip control; the ISO rhombic form ensures compatibility with standard turning holders and secure clamping. Order the VCMT110302‑PS AH8005 inserts directly via Metav Werkzeuge or consult the technical team for application-specific advice. VCMT 110302 AH8005 — Rhombic turning insert VCMT110302 for turning by Tungaloy, PVD‑coated carbide, 0.2 mm radius VCMT110302‑PS AH8005 is a rhombic ISO turning insert designed for external and internal turning operations and for machining heat‑resistant alloys and hard materials. PVD‑coated carbide for heat resistance ISO rhombic form for standard holders 0.2 mm corner radius for fine finishes Cylindrical hole with countersink for secure clamping High process reliability through wear‑resistant grade and coating The combination of a PVD‑coated cutting surface and a wear‑resistant carbide base (grade AH8005) delivers stable performance on demanding materials. This configuration reduces flank wear and maintains cutting edge integrity during prolonged cuts, which translates into fewer indexings and a steadier production flow. The insert’s construction supports turning tasks where heat and abrasion are prominent, ensuring consistent results in series machining. Compatibility and secure clamping for predictable setups The insert follows ISO dimensions and a rhombic geometry, so it fits a wide range of standard external holders and boring bars when form, free angle, tolerance class, fastening method, size and thickness are matched. The plate comes with a hole featuring a cylindrical bore and a single‑side countersink (40°–60°), enabling reliable locating and clamping. The 7° relief and the specified 35° angle are designed to balance cutting forces and accessibility in diverse setups. Precision finishing with controlled chip formation A 0.2 mm corner radius provides a fine edge for achieving improved surface quality without compromising edge strength for light to medium interrupted cuts. The PS chipbreaker geometry governs chip flow under typical turning parameters, reducing the risk of long, entangling chips and assisting coolant access to the cutting zone. With a plate thickness of 3.18 mm and nominal size 11, the insert offers a stable platform for repeatable machining tolerances. Cost‑effective productivity and predictable tool life PVD treatment and the AH8005 carbide composition are chosen for good wear resistance on heat‑resistant alloys and other tough steels, which keeps change‑over frequency low and contributes to improved productivity. The ISO standardisation and robust clamping features reduce setup variability and help maintain consistent part quality across shifts. For operations prioritising process security and predictable tool life, this insert supports economical machining strategies. For tailored advice on integrating Tungaloy inserts into production or to secure VCMT110302‑PS AH8005 for specific turning applications, contact Metav Werkzeuge for expert consultation and supply arrangements. Technical Data Article number: 6775807 Manufacturer SKU: TUN6775807 SKU: 6775807-Tungaloy Model series: ISO‑Drehwendeschneidplatten Data Size: 11 Thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 7° Angle: 35° Special features PVD‑coated carbide, grade AH8005 Chipbreaker: PS Rhombic plate form VCMT With hole: cylindrical hole + single‑side countersink (40°–60°) Application: Turning FAQ What applications is this insert intended for? This insert is intended for turning operations, suitable for external and internal turning as described; VCMT110302‑PS AH8005 is optimised for stable machining. Which materials can be machined with this grade? The AH8005 grade with PVD coating is formulated for heat‑resistant alloys and other hard materials; it provides enhanced wear resistance during continuous cutting. How does the PS chipbreaker influence machining? The PS chipbreaker on the VCMT110302‑PS promotes short, controllable chips and supports coolant penetration, improving operator safety and surface consistency. What clamping features ensure secure mounting? The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°), allowing precise locating in compatible ISO holders and secure fastening for repeatable setups. Why choose a 0.2 mm corner radius? A 0.2 mm corner radius balances surface finish and edge robustness; it is suitable where a finer finish is required without excessive compromise to tool life on semi‑finishing passes. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 110302 AH8015 Wendeplatten - Tungaloy
The combination of PVD‑coated carbide AH8015, a TSF chipbreaker and a 0.2 mm corner radius provides a balanced mix of wear resistance and edge stability for demanding turning operations; order the VCMT110302‑TSF AH8015 directly via Metav Werkzeuge or consult our team for process optimisation. VCMT 110302 AH8015 – Indexable turning insert by Tungaloy (rhombic, TSF chipbreaker, PVD‑coated) VCMT110302‑TSF AH8015 is an ISO‑standard indexable insert designed for external and internal turning of heat‑resistant alloys and general turning tasks, delivering reliable cutting performance in conventionally demanding machining. ISO‑standard rhombic insert VCMT110302 PVD‑coated carbide AH8015 for high heat resistance TSF chipbreaker for controlled chip formation Cylindrical hole with 40°–60° countersink Consistent performance for heat‑resistant alloys The PVD‑coated carbide grade AH8015 is formulated as a first choice for machining heat‑resistant alloys, offering a considered balance between wear resistance and cutting‑edge stability. This results in fewer unscheduled tool changes and more predictable tool life, which supports steady production output. As an indexable insert, it permits fast index changes and straightforward re‑use of existing holders, reducing setup time and helping to maintain a continuous machining flow while ensuring repeatable results. Geometry tuned for surface quality and stable cuts With a 0.2 mm corner radius and a 7° clearance angle, the insert geometry favours improved surface finishes and reduced cutting forces in medium to light depth cuts. The TSF chipbreaker promotes controlled chip formation, aiding swarf evacuation and reducing the risk of interrupted cuts. The insert’s 3.18 mm thickness and 35° approach geometry help maintain edge stability under variable cutting conditions, so the user benefits from predictable machining behaviour and consistent component quality. System compatibility and economical workflow The ISO designation ensures straightforward compatibility with standard holders; matching is determined by form, clearance, tolerance class, fastening, size and thickness. The machining system comprises the ISO insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws, enabling rapid assembly and repeatable clamping. For tailored cutting data, holder recommendations or batch availabilities, Metav Werkzeuge provides application advice and technical data – contact info@metav-werkzeuge.com or call +49 2822 7131930 for specific recommendations that help optimise process efficiency. For technical application advice, cutting data and availability of the Tungaloy VCMT110302‑TSF AH8015, contact Metav Werkzeuge for personalised guidance on holder selection and delivery options. Technical data Article number: 6951529 SKU: 6951529‑Tungaloy Manufacturer SKU: TUN6951529 Designation: VCMT110302‑TSF AH8015 Brand: Tungaloy Facts Corner radius: 0.2 mm Clearance angle: 7° Approach/wedge angle: 35° Plate thickness: 3.18 mm Plate size: 11 mm Special features Rhombic plate form Cylindrical hole + single‑side countersink (40°–60°) PVD‑coated carbide (AH8015) TSF chipbreaker For external and internal turning Compatibility with ISO holders System components: insert + external holder/boring bar + shim/clamp set + replacement screws FAQ What materials is this insert suited for? The VCMT110302‑TSF AH8015 from Tungaloy is optimised for heat‑resistant alloys and general turning of difficult‑to‑machine alloys thanks to the PVD‑coated carbide grade AH8015. Which holders fit this ISO insert? Holders and boring bars that accept ISO 110302 rhombic inserts are compatible; matching is governed by form, clearance, tolerance class, fastening, size and thickness for correct clamping and geometry. What is the purpose of the TSF chipbreaker? The TSF chipbreaker on this insert promotes controlled chip formation, improving swarf evacuation and reducing the likelihood of built‑up edge or interrupted cuts in turning operations. How does the 0.2 mm radius affect the machining result? A 0.2 mm corner radius allows for a balance between profile accuracy and edge strength, supporting good surface quality while maintaining a stable cutting edge under variable feed conditions. What system components are required for use? A complete working setup includes the indexable insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws; the VCMT110302‑TSF AH8015 is designed to integrate into standard ISO turning tool systems. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 110302 AH8015 Wendeplatten - Tungaloy
VCMT 110302 AH8015 Drehwendeschneidplatte für Drehen Die VCMT 110302 AH8015 Drehwendeschneidplatte ist eine ISO-genormte Wendeschneideplatte für Außen- und Innendrehen an hitzebeständigen Legierungen ISO-genormte Form VCMT für einfache Austauschbarkeit PVD-beschichtung für hohe Verschleißfestigkeit PS-Spanbrecher für stabile Spanbildung Zylindrisches Loch mit Senkung für sichere Befestigung Eckenradius 0,2 mm für feine Oberflächengüte Hohe Standzeit durch beschichtetes Hartmetall Die VCMT110302-PS AH8015 kombiniert Hartmetall mit einer PVD-Beschichtung, die eine ausgewogene Balance zwischen Verschleißfestigkeit und Schneidkantenstabilität bietet. Anwender profitieren davon bei der Bearbeitung von hitzebeständigen Legierungen, weil die Beschichtung die Wärmeaufnahme reduziert und die Werkzeugstandzeit erhöht. Diese Eigenschaft macht die Platte besonders geeignet für mittlere bis hohe Schnittgeschwindigkeiten und längere Serienläufe. Präzise Spanformung für kontinuierliche Prozesssicherheit Der integrierte PS-Spanbrecher ist auf stabile Spanbildung ausgelegt und sorgt für konstante Spanabfuhr sowie verbesserte Oberflächengüten. Durch den Eckenradius von 0,2 mm lassen sich feine Einbringungen erreichen, ohne die Kantensicherheit zu gefährden. Das Ergebnis ist eine gleichbleibende Werkstückqualität bei gleichzeitiger Produktivitätssteigerung und reduzierten Nachbearbeitungsaufwänden. Passgenauigkeit und Einbaumerkmale für einfache Montage Die Platte entspricht ISO-Normen; Kompatibilität zum Halter richtet sich nach Form, Freiinkel, Toleranzklasse, Befestigung, Größe und Dicke. Der Freiwinkel 7° und das zylindrische Loch mit einseitiger Senkung (40°–60°) ermöglichen eine sichere, spielfreie Befestigung im Außenhalter oder in der Bohrstange. Anwender sollten Haltergeometrie und Schraubenausführung überprüfen, um optimale Sitz- und Spannverhältnisse zu gewährleisten. Entwickelt für Produktionsumgebungen und Lohnfertiger Die Wendeschneidplatte richtet sich an CNC-Betriebe, Lohnfertiger und Werkstätten, die Wert auf Prozesssicherheit und Wiederholgenauigkeit legen. Die Sorte AH8015 ist erste Wahl für allgemeine Zerspanungsaufgaben an hitzebeständigen Legierungen und bietet eine wirtschaftliche Lösung durch lange Standzeiten und stabile Spanformer. So lassen sich Stillstandszeiten reduzieren und Maschinenauslastung verbessern. Empfehlung: Für produktive Serienbearbeitung die VCMT 110302 AH8015 von Tungaloy über Metav Werkzeuge anfragen oder technische Beratung per eMail info@metav-werkzeuge.com bzw. Telefon +49 2822 7131930 in Anspruch nehmen Produktmerkmale Artikelnummer: 6775808 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT110302-PS AH8015 SKU: 6775808-Tungaloy Herstellerartikelnummer: TUN6775808 Fakten Eckenradius: 0,2 mm Freiinkel: 7° Winkel: 35° Plattendicke: 3,18 mm Plattengröße: 11 Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall Sorte: AH8015 — erste Wahl für hitzebeständige Legierungen Spanbrecher: PS — stabile Spanbildung Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Mit Loch Einsatz: Drehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz, Ersatzschrauben FAQ Wie unterscheidet sich die Sorte AH8015 von anderen Sorten? Die Sorte AH8015 der VCMT 110302 AH8015 von Tungaloy ist als PVD-beschichtetes Hartmetall auf gute Balance zwischen Verschleißfestigkeit und Schneidkantenstabilität ausgelegt und eignet sich besonders für hitzebeständige Legierungen. Welche Rolle spielt der PS-Spanbrecher bei der Bearbeitung? Der PS-Spanbrecher unterstützt eine kontrollierte Spanbildung und verbessert die Spanabfuhr; das reduziert Ausschuss und erleichtert die Fertigungsstabilität bei Serienprozessen mit der VCMT 110302 AH8015. Welche Halter müssen verwendet werden, damit die Platte passt? Halter müssen Form VCMT, passende Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke unterstützen; das zylindrische Loch mit Senkung gewährleistet dabei eine sichere Befestigung. Für welche Werkstoffe ist diese Wendeschneidplatte geeignet? Die Platte eignet sich vor allem für hitzebeständige Legierungen; durch die AH8015-Sorte und die PVD-Beschichtung werden Verschleiß und Kantenausbrüche bei solchen Werkstoffen deutlich reduziert. Welche Vorteile bringt der Eckenradius 0,2 mm in der Praxis? Der Eckenradius 0,2 mm ermöglicht feine Oberflächen und präzise Konturen bei gleichzeitig ausreichender Kantensicherheit, sodass Nachbearbeitung minimiert wird. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110302 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced wear resistance and edge stability of the PVD-coated AH8015 carbide combined with the TM chipbreaker for dependable turning results; order directly via Metav Werkzeuge or consult the specialists for holder compatibility and optimal setup. VCMT110302-TM AH8015 — ISO turning insert (VCMT 110302 AH8015) by Tungaloy, PVD-coated carbide, TM chipbreaker VCMT110302-TM AH8015 is a precision ISO indexable insert for external and internal turning applications, optimised for machining heat‑resistant alloys PVD-coated carbide for heat-resistant alloys TM chipbreaker for stable chip control ISO rhombic shape, 35° included angle Cylindrical hole with 40°–60° countersink Reliable machining of heat‑resistant alloys with balanced performance The PVD‑coated AH8015 grade delivers a combination of wear resistance and edge stability that suits many demanding turning tasks. As a carbide insert with a protective PVD layer, it resists abrasion and thermal softening better than uncoated grades, which helps to extend tool life during continuous cuts on difficult-to-machine materials. The integrated TM chipbreaker promotes consistent chip formation, reducing the risk of built-up edge and improving surface finish; this leads to fewer interruptions and more predictable productivity in the machining process. ISO compatibility and straightforward holder selection This insert conforms to the ISO indexable insert system and is compatible with matching external holders or boring bars when form, clearance angle, tolerance class, clamping method, size and thickness align. The specified 7° relief angle and the rhombic geometry with a 35° included angle determine seat and clamping requirements, while a thickness of 3.18 mm and a nominal size of 11 mm define mechanical fit. Understanding these parameters simplifies holder selection and reduces setup time, ensuring a secure, repeatable mounting that supports consistent cutting behaviour. Shop-floor advantages: stability, repeatability and easy pairing With a corner radius of 0.2 mm and the TM chipbreaker, the insert provides a balance between edge strength and fine finishing capability, suitable for both roughing and light finishing passes. The presence of a cylindrical hole with a one‑sided countersink (40°–60°) allows positive clamping and straightforward replacement in standard clamping systems. These attributes combine to offer predictable tool life and reliable process stability, reducing unplanned downtime and contributing to efficient batch production or one-off precision turning. For tailored advice on integrating the Tungaloy VCMT110302-TM AH8015 insert into specific setups, contact Metav Werkzeuge for selection and compatibility support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951564 Manufacturer SKU: TUN6951564 SKU: 6951564-Tungaloy Model series: ISO turning indexable inserts Designation: VCMT110302-TM AH8015 Facts Radius: 0.2 mm Clearance angle: 7° Included angle: 35° Thickness: 3.18 mm Size: 11 mm Special features Material: carbide Coating: PVD (AH8015) Chipbreaker: TM Plate form: rhombic Hole: cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) FAQ Which materials is this insert best suited for? The Tungaloy VCMT110302-TM AH8015 insert is specified as a first choice for general machining of heat‑resistant alloys, offering a balanced compromise between wear resistance and edge stability for elevated-temperature workpieces. How does one ensure compatibility with existing holders? Compatibility is determined by insert form, 7° clearance angle, tolerance class, clamping method, size (11 mm) and thickness (3.18 mm); check that the holder accepts a rhombic ISO VCMT insert and the specified securing method for proper fit and repeatability. What advantages does the TM chipbreaker provide? The TM chipbreaker promotes controlled chip formation during both external and internal turning, which helps maintain surface quality, reduces the likelihood of chip entanglement and supports more consistent cycle times. Is the insert suitable for finishing passes? With a corner radius of 0.2 mm and stable edge geometry, the insert can be used for light finishing operations where a balance of strength and fine surface finish is required. Does the insert feature a mounting hole and countersink? Yes — the insert includes a cylindrical hole with a one‑sided countersink (40°–60°) to enable secure clamping in compatible ISO indexable insert holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110302 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet grade AT9530, a 0.2 mm corner radius and ISO compatibility for consistently high surface quality and predictable tool life; order the inserts directly via Metav Werkzeuge or consult the team for holder compatibility. VCMT110302-PS AT9530 ISO turning insert for finishing — Tungaloy The VCMT110302-PS AT9530 is an ISO rhombic turning insert designed for precision finishing and light turning of steel, offering a coated cermet grade focused on surface quality and even wear. Coated cermet grade AT9530 Optimised for surface finish 0.2 mm corner radius for fine profiles ISO rhombic VCMT geometry, 35° wedge angle Consistent finishing and predictable wear for high-quality components The insert combines a coated cermet cutting grade with a geometry engineered for finishing operations, delivering a stable wear pattern and improved surface integrity. Because the cutting material emphasises even abrasion rather than aggressive removal, the component finish is more consistent across production batches. This characteristic reduces downstream rework and inspection effort, making the insert particularly suitable for operations where surface quality is a priority and dimensional repeatability matters. Compatibility and secure clamping reduce setup time Compatibility with the toolholder is determined by form, clearance angle, tolerance class, fastening type, size and thickness; the ISO designation ensures interchangeability within standard systems. The rhombic VCMT form with a cylindrical hole and single-sided countersink (40°–60°) provides secure, repeatable clamping in matched holders. Where tool changeovers are frequent, the standardised interface reduces adjustment time and helps maintain process stability. Geometry and micro-attributes that support fine turning The small 0.2 mm corner radius and PS chipbreaker are tuned for light cuts and finishing passes: the radius enables the reproduction of fine profiles without compromise, while the chipbreaker guides chip flow for reliable evacuation and consistent cutting forces. The 7° clearance angle and 35° wedge angle balance cutting strength and accessibility, allowing for close control of cutting conditions during external and internal turning operations. Practical application advice and process benefits Intended for turning, the insert is best applied to finishing and light-machining tasks on steel when the priority is surface quality and uniform tool wear. Selection of the correct chipbreaker and grade is essential: the AT9530 coating is optimised for quieter wear and good surface finish rather than heavy stock removal. When integrated into a system consisting of a matched external holder, shim or clamp set and correct screw, the insert contributes to a predictable, productive turning process and fewer unplanned interventions. For precision finishing in steel, request the Tungaloy VCMT110302-PS AT9530 from Metav Werkzeuge or consult our specialists for holder compatibility and process optimisation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6773759 SKU: 6773759-Tungaloy Manufacturer SKU: TUN6773759 Label: VCMT110302-PS AT9530 Model series: ISO-Drehwendeschneidplatten Facts Size: 11 mm Corner radius: 0.2 mm Thickness: 3.18 mm Wedge angle: 35° Clearance angle: 7° Special features Cutting grade: AT9530 Cutting material type: coated cermet Chipbreaker: PS Plate form: rhombic (VCMT) Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Application: turning System setup: ISO turning insert, matching external holder, shim/clamp set and replacement screws FAQ What materials is this insert designed for? The VCMT110302-PS AT9530 is formulated for finishing and light machining of steel, where the AT9530 coated cermet provides a focus on surface quality and uniform wear. Which chipbreaker should be chosen for fine finishing? The PS chipbreaker supplied with this type of insert is designed for finishing cuts; it promotes controlled chip formation and steady cutting forces for improved surface integrity with the VCMT geometry. How does the corner radius affect the machined surface? A 0.2 mm corner radius offers a balance between edge strength and the ability to reproduce fine profiles, reducing the tendency for edge chipping while supporting a high-quality surface finish. Is the insert compatible with standard ISO holders? Yes, the ISO designation ensures compatibility provided the holder matches in form, clearance angle, tolerance class, fastening, size and thickness; secure clamping is achieved via the cylindrical hole and countersink arrangement. Can this insert be used for internal and external turning? The rhombic VCMT form and the geometric parameters make the insert suitable for both external and internal turning operations in light and finishing applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110302 T6215 Wendeplatten - Tungaloy
Take advantage of the reliable combination of CVD-coated carbide grade T6215, precise geometry and a PS chipbreaker tailored for stainless-steel turning; order the insert directly via Metav Werkzeuge or consult their specialists for application-matched recommendations. VCMT110302-PS T6215 ISO turning insert — rhombic geometry, CVD-coated carbide (Tungaloy) A VCMT110302-PS T6215 is an ISO-standard rhombic turning insert engineered for stable to lightly interrupted stainless-steel machining in external and internal turning operations. CVD-coated carbide grade T6215 PS chipbreaker for stainless steels Rhombic ISO insert with 35° cutting angle 0.2 mm corner radius, 3.18 mm thickness Longer tool life when machining stainless steels The CVD-coated carbide formulation of the T6215 grade delivers improved wear resistance in the demanding environment of machining stainless steel, helping to extend tool life under stable cutting conditions. Combined with the PS chipbreaker, this insert promotes controlled chip formation and evacuation, which reduces heat build-up and lowers the risk of material adhesion. The result is more consistent surface finish and longer intervals between indexings, translating into measurable productivity gains on medium- to high-volume turning tasks. Precise geometry for repeatable performance Thanks to its ISO rhombic geometry and a defined 35° cutting angle, the insert offers a balanced mix of strength and cutting accessibility for a wide range of turning profiles. The 0.2 mm corner radius supports modest corner strengthening without excessive cutting forces, which is especially beneficial for finishing passes or light semi-finishing work. The insert’s 3.18 mm thickness and standard hole pattern ensure a secure clamping interface when matched to ISO-compliant holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness, so correct holder selection is essential for repeatable results. Secure mounting and standardised fit for production use The insert is supplied with a cylindrical hole plus a single-sided countersink (40°–60°), enabling stable seating and reliable torque transmission when clamped in compatible toolholders. This standardised hole and countersink arrangement facilitates quick insert changes and straightforward inventory management on the shop floor. When paired with a correctly specified external holder or boring bar, the system—insert, clamping kit and fastening screw—delivers the stability required for predictable chip control and dimensional accuracy in serial manufacturing. Practical selection guidance for process planners Select the PS chipbreaker and the T6215 grade when processing stainless steels under predominantly stable conditions; for severely interrupted cuts or marginal rigidity, evaluate alternative grades or heavier geometry. The ISO designation and form permit easy cross-referencing in toollists and CAM setups, while the CVD layer helps maintain edge integrity during extended, continuous production runs. For machining strategies, favour moderate feed and controlled depth of cut to maximise the benefits of the coated carbide and to maintain stable chip formation. For application-specific advice or to order Tungaloy VCMT110302-PS T6215 inserts, contact Metav Werkzeuge for tailored recommendations and immediate availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6903152 Manufacturer SKU: TUN6903152 Vendor SKU: 6903152-Tungaloy Core specifications ISO designation: VCMT110302-PS Insert geometry: rhombic, 35° cutting angle Size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 7° Design & features Material: carbide Grade/coating: T6215 (CVD) Chipbreaker: PS Hole: with hole — cylindrical + single-sided countersink (40°–60°) Intended application: turning, stainless steels FAQ What materials is this insert suitable for? The VCMT110302-PS T6215 insert is optimised for stainless-steel turning; the T6215 CVD-coated carbide and PS chipbreaker promote wear resistance and controlled chip flow when machining alloyed and austenitic stainless steels. How does the PS chipbreaker affect machining? The PS chipbreaker on the VCMT110302-PS helps form short, manageable chips and improves evacuation during turning, which supports consistent surface quality and reduces heat concentration at the cutting edge. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; the VCMT110302-PS is intended for ISO-standard external holders and boring bars that accept rhombic inserts with a cylindrical hole and single-sided countersink. What are the key dimensions to verify before ordering? Verify the ISO designation VCMT110302-PS, the insert size (11 mm), thickness (3.18 mm), corner radius (0.2 mm) and the 7° clearance angle to ensure correct fit and function in the chosen holder. Is this insert indexed and how is it secured? The VCMT110302-PS is an indexable turning insert; it is secured via the central cylindrical hole with a single-sided countersink (40°–60°) into the matching clamping assembly of the toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110302 T6215 Wendeplatten - Tungaloy
VCMT110302-TM T6215 ISO-Drehwendeschneidplatte von Tungaloy Die VCMT110302-TM T6215 ist eine ISO-genormte Drehwendeschneidplatte für das Drehen von rostfreiem Stahl unter stabilen bis leicht unterbrochenen Schnittbedingungen. Hohe Verschleißfestigkeit dank CVD-Beschichtung Präziser Eckenradius 0,2 mm für feine Schnittqualität Rhombische Plattenform kompatibel mit ISO-Haltern Mit zylindrischem Loch und einseitiger Senkung für sichere Befestigung Robuste Schneidstoffkombination für lange Standzeiten Die Kombination aus CVD-beschichtetem Hartmetall und der Sorte T6215 sorgt für Verschleißfestigkeit bei anspruchsvollen Drehverfahren an rostfreiem Stahl. Die Beschichtung (CVD, chemische Dampfabscheidung) reduziert thermischen Verschleiß und verlängert die Lebensdauer der Schneide. Dadurch sinken Werkzeugwechselzeiten und steigen Laufzeiten in der Serienfertigung, was zu messbarer Prozesssicherheit führt. Für Anwender bedeutet das weniger Stillstand und konstantere Bauteilqualität. Geometrie, die Spanbildung und Werkstückoberfläche optimiert Die rhombische Plattenform mit Eckenradius 0,2 und Freiwinkel 7° ist auf präzise Spanabfuhr und stabile Auflage im Haltersystem ausgelegt. Der integrierte Spanformer TM ist auf den Einsatz bei rostfreiem Stahl abgestimmt und unterstützt kontrollierte Spanbildung auch bei leicht unterbrochenem Schnitt. Das zylindrische Loch mit einseitiger Senkung (40°–60°) gewährleistet zuverlässige Klemmsitz und Wiederholgenauigkeit bei Plattenwechseln. Effizienzvorteile im Fertigungsalltag Im Einsatz beim Außen- und Innendrehen reduziert die Platte Bearbeitungszeiten durch gleichmäßige Schnittkraftverteilung und stabile Schneidkante. Besonders profitabel ist die Sorte für Betriebe, die häufig rostfreie Teile fertigen und dabei auf konstante Produktivität und Oberflächenqualität angewiesen sind. Die technische Auslegung ermöglicht wirtschaftliche Werkstücksergebnisse bei geringem Nacharbeitsaufwand. Systemhinweise und Halterkompatibilität Die Einsetzbarkeit richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke der Platte; eine korrekte Kombination aus ISO-Halter, Unterlage und Klemmsatz ist entscheidend für Prozessstabilität. Die Kompatibilität zur vorhandenen Werkzeugaufnahme prüfen, da nur passende Halter die volle Leistungsfähigkeit der Wendeschneidplatte abrufen. Ersatzschrauben und Unterlagen minimieren Einrichtezeiten und sichern Wiederholgenauigkeit. Für produktive Drehprozesse an rostfreiem Stahl empfiehlt sich die Wahl der VCMT110302-TM T6215 von Tungaloy; bei Bedarf technische Beratung und Verfügbarkeit über Metav Werkzeuge anfragen: info@metav-werkzeuge.com, +49 2822 7131930 Produktmerkmale Artikelnummer: 6951562 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT110302-TM T6215 Hersteller SKU: TUN6951562 Daten Eckenradius: 0,2 mm Winkel: 35° Freiwinkel: 7° Plattendicke: 3,18 mm Plattengröße: 11 mm Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (chemische Dampfabscheidung) Sorte: T6215 Spanbrecher: TM Plattenform: rhombisch Anwendung: Drehen Einsatzgebiet: rostfreier Stahl Systemhinweis: Kompatibilität durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt FAQ Welche Werkstoffe lassen sich mit der VCMT110302-TM T6215 bearbeiten? Die VCMT110302-TM T6215 von Tungaloy wurde speziell für das Drehen von rostfreiem Stahl entwickelt; die Sorte T6215 bietet verschleißfesten Schnitt beim Bearbeiten dieser Werkstoffgruppe. Wie wird die Platte sicher im Halter befestigt? Die Platte verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°) und ist für ISO-Halter ausgelegt; in der Regel werden Unterlage, Klemmsatz und passende Schrauben verwendet, um Wiederholgenauigkeit sicherzustellen. Für welche Schnittbedingungen eignet sich die VCMT110302-TM T6215? Die VCMT110302-TM T6215 eignet sich für stabile bis leicht unterbrochene Schnittbedingungen beim Außen- und Innendrehen; der Spanformer TM unterstützt kontrollierte Spanabfuhr und konstante Oberflächenqualität. Welche Vorteile bringt die CVD-Beschichtung der Tungaloy-Platte? Die CVD-Beschichtung der VCMT110302-TM T6215 reduziert thermischen Verschleiß und stärkt die Schneidkante, was zu längeren Standzeiten und höherer Prozesssicherheit in der Serienfertigung führt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110302 T6215 Wendeplatten - Tungaloy
VCMT 110302 T6215 – Drehwendeschneidplatte für Drehen von Tungaloy Die VCMT 110302 T6215 ist eine ISO-genormte, CVD-beschichtete Wendeschneidplatte für das Drehen von rostfreiem Stahl unter stabilen bis leicht unterbrochenen Bedingungen. ISO-genormte rhombische Wendeschneidplatte TSF CVD-beschichtetes Hartmetall für hohe Verschleißfestigkeit Speziell für das Drehen von rostfreiem Stahl geeignet Freiwinkel 7° und Eckenradius 0,2 mm für präzise Schnitte Mit zylindrischem Loch und einseitiger Senkung Hohe Prozesssicherheit bei rostfreiem Stahl Die VCMT110302-TSF T6215 bietet durch die CVD-Beschichtung eine dauerhafte Verschleißfestigkeit, die speziell auf das Drehen von rostfreiem Stahl abgestimmt ist. Diese Beschichtung schützt die Schneidkante gegen thermischen und mechanischen Verschleiß, wodurch die Standzeit steigt und Nacharbeit reduziert wird. Anwender profitieren von konstanter Oberflächengüte und zuverlässiger Spanbildung auch unter anspruchsvollen Produktionsbedingungen. Material und Schneidstoff: langlebige Performance CVD-beschichtetes Hartmetall sorgt für die Kombination aus Härte und Zähigkeit, die für produktive Zerspanung erforderlich ist. Der Eckenradius 0,2 mm und der spanoptimierte TSF-Spanbrecher ermöglichen saubere Spanabfuhr und reduzieren Ratterneigung. Für Betriebe bedeutet das weniger Stillstand und bessere Wiederholgenauigkeit bei Serienfertigung. Systemkompatibilität und Einbauhinweise Die Platte ist ISO-genormt; Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Durch das zylindrische Loch mit einseitiger Senkung (40°–60°) lässt sich die Platte sicher auf gängige Außenhalter oder Bohrstangen montieren. Beim Einsatz empfiehlt sich das Prüfen der Halteraufnahme und der Toleranzklasse zur Sicherstellung von Spantrennung und Schnittstabilität. Anwendungsempfehlung und Zielgruppe Entwickelt für Lohnfertiger und Produktionsbetriebe, die rostfreien Stahl bearbeiten, bietet die Platte eine wirtschaftliche Lösung für Außen- und Innendrehen. Die Kombination aus Freiwinkel 7° und stabiler Schneidstoffsorte macht sie besonders geeignet für stabile bis leicht unterbrochene Schnitte. Fertigungsleiter erhalten so eine robuste Option für Serienprozesse mit konstanten Ergebnissen. Für produktive Anwendungen an rostfreiem Stahl empfehlen wir die Verwendung der CVD-beschichteten Wendeschneidplatte von Tungaloy; bei Fragen zur Halterkompatibilität oder zur Auswahl der passenden Sorte wenden Sie sich bitte an info@metav-werkzeuge.com oder telefonisch an +49 2822 7131930 Produktmerkmale Artikelnummer: 6951525 Marke: Tungaloy SKU Hersteller: TUN6951525 Bezeichnung: VCMT110302-TSF T6215 Modellserie: ISO-Drehwendeschneidplatten Fakten Winkel: 35° Freiwinkel: 7° Eckenradius: 0,2 mm Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD: chemische Gasphasenabscheidung) Sorte: T6215 Spanbrecher: TSF Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Drehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben Einsatzbedingungen: stabile bis leicht unterbrochene Bedingungen für rostfreier Stahl FAQ Welche Werkstoffe lassen sich mit der Wendeschneidplatte bearbeiten? Die Wendeschneidplatte VCMT110302-TSF T6215 von Tungaloy ist speziell für das Drehen von rostfreiem Stahl ausgelegt; durch die Auswahl des passenden Spanbrechers TSF eignet sie sich für stabile bis leicht unterbrochene Schnitte. Welche Vorteile bietet die CVD-Beschichtung bei der VCMT110302-TSF T6215? Die CVD-Beschichtung der Tungaloy-Variante erhöht die Verschleißfestigkeit des Hartmetalls und sorgt für längere Standzeiten sowie konstantere Oberflächengüte bei hochlegierten Werkstoffen wie rostfreiem Stahl. Welche Geometrie-Parameter sind bei der Auswahl des Halters zu beachten? Bei der Verwendung der VCMT110302-TSF T6215 sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters entscheidend für sichere Sitz und optimale Spanabfuhr. Wie beeinflusst der Eckenradius das Zerspanungsergebnis? Der Eckenradius 0,2 mm der VCMT110302-TSF T6215 liefert präzise Schnitte und eine feine Oberflächengüte, während ein zu kleiner Radius die Schneidkante stärker belasten kann. Welche Montagedetails sind beim zylindrischen Loch zu beachten? Das zylindrische Loch mit einseitiger Senkung (40°–60°) der VCMT110302-TSF T6215 erlaubt sichere Befestigung; Schrauben und Unterlage sollten zur Toleranzklasse des Halters passen, um optimale Stabilität zu gewährleisten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110302 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, secure clamping and a dedicated chipbreaker for productive medium-steel turning; the geometry and ISO conformity ensure straightforward integration into standard holder systems. Order directly via Metav Werkzeuge or ask our consultants if needed. VCMT 110302 T9215 — ISO turning insert, CVD-coated carbide with PS chipbreaker (Tungaloy) The VCMT 110302 T9215 is an ISO-standard indexable turning insert designed for efficient external and internal turning of medium steels, offering a balance of wear resistance and fracture toughness for continuous to lightly interrupted cuts. ISO-standard rhombic insert VCMT 110302 CVD-coated carbide grade T9215 PS chipbreaker for medium steel cutting 0.2 mm corner radius, 7° clearance angle Consistent productivity from a CVD-coated carbide grade The CVD-coated cemented carbide grade T9215 delivers a combination of wear resistance and fracture toughness tailored for mid-range steel machining. This coating reduces flank wear and extends usable life during continuous or slightly interrupted cuts, so cycle times remain low and tool changes are less frequent. The result is higher throughput with predictable performance. Reliable geometry and ISO compatibility for easy integration The rhombic VCMT form conforms to ISO dimensions, with a nominal size of 11 mm and a plate thickness of 3.18 mm; the insert features a 0.2 mm corner radius and a 7° clearance angle. The fixing arrangement includes a cylindrical hole with a single-sided countersink (40°–60°), enabling secure clamping in standard external holders or boring bars. Compatibility depends on form, clearance, tolerance class, clamping and thickness, which simplifies holder selection and reduces setup uncertainty. Controlled chips and improved surface quality with the PS chipbreaker The PS chipbreaker is optimised for medium-steel applications: it shapes chips reliably, lowers the risk of long, entangling swarf and supports consistent surface finish. For light profiling and finishing passes the small corner radius helps achieve better edge definition while maintaining strength at the cutting edge. Choosing the correct chipbreaker and grade for workpiece material and process stability directly improves productivity and part quality. Practical system advice for operational reliability An efficient machining system comprises the ISO insert, a matching external holder or boring bar, a suitable shim/locking kit and spare fixing screws. The insert functions best when mounted with correct clamping torque and stable toolholding; selecting the right holder geometry and machine stability reduces vibration and tool wear. For workshops seeking repeatable results, the combination of T9215 grade and the PS chipbreaker supports longer tool life and steady production rates. For selection advice and prompt supply of Tungaloy inserts, contact Metav Werkzeuge for tailored recommendations and to arrange delivery via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6774008 Manufacturer SKU: TUN6774008 Model series: ISO turning inserts Label: VCMT110302-PS T9215 Facts Size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle / wedge: 35° ISO code: 110302 Special features CVD-coated cemented carbide, grade T9215 PS chipbreaker, optimised for medium steel Rhombic form VCMT Cylindrical hole with single-sided countersink (40°–60°) Application: turning (external and internal) System components: ISO insert, external holder/boring bar, shim/locking set, replacement screws FAQ What materials is this insert best suited for? The VCMT110302-PS T9215 insert is optimised for medium steels; the CVD-coated T9215 grade combines wear resistance and toughness for productive machining of these materials. How does the PS chipbreaker affect machining? The PS chipbreaker on this indexable turning insert shapes chips to minimise entanglement, supports stable cutting in continuous to slightly interrupted cuts and helps maintain surface finish. Which holders are compatible with this ISO insert? Compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness; the VCMT form and 11 mm nominal size suit standard ISO external holders and boring bars designed for VCMT inserts. What is the advantage of the 0.2 mm corner radius? A 0.2 mm corner radius provides a balance between edge strength and fine detail capability, improving surface integrity on finishing passes while still resisting premature chipping. Is this insert suitable for interrupted cuts? Yes; the T9215 grade is designed for continuous to slightly interrupted cutting. For heavier interruptions, a different grade or geometry may be advisable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110302 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade T9225 and a robust TSF chipbreaker for reliable, mid-to-heavy steel turning; the rhombic VCMT form and 7° clearance ensure compatibility with ISO holders and stable cutting. Order the VCMT110302-TSF T9225 directly via Metav Werkzeuge or ask our consultants if needed VCMT 110302 T9225 — ISO turning insert for medium to heavy steel turning by Tungaloy A VCMT110302-TSF T9225 indexable insert designed for external and internal turning, offering a universal, toughness-focused grade for variable engagement and light interruption conditions CVD-coated carbide grade T9225 TSF universal chipbreaker Rhombic VCMT form with 7° clearance Cylindrical hole with 40°–60° countersink Reliable performance for mixed and demanding turning tasks The combination of a CVD-coated surface and the T9225 carbide matrix is engineered to balance wear resistance and toughness, making this insert particularly suited to medium-to-heavy steel turning. The TSF chipbreaker promotes consistent chip control under varying depths of cut and makes the tool more forgiving where engagement changes occur. For production environments seeking reduced downtime and predictable tool life, this indexable insert provides a pragmatic compromise between economy and endurance while supporting higher metal-removal rates. Geometry and compatibility that simplify tool selection The rhombic VCMT geometry and the specified 7° clearance angle mean the insert fits standard ISO-type turning toolholders that accept this footprint; compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness. The VCMT110302-TSF form, with a corner radius of 0.2 mm and a plate thickness of 3.18 mm, suits finishing and light semi-finishing where a fine edge and controlled chip breakage are required. The central cylindrical hole with a single-side countersink (40°–60°) ensures secure clamping and repeatable seating in common clamping systems. Practical advantages for workshop productivity and process security Choosing the TSF chipbreaker together with the T9225 grade supports stable cutting in variable conditions, lowering the risk of sudden edge failure during slightly interrupted cuts. The insert’s dimensions and geometry reduce setup adjustments and simplify inventory management in mixed-production shops. Where users are transitioning between different steels or encountering fluctuating cutting parameters, the robust nature of this insert helps maintain component tolerances and surface finish quality, contributing directly to more consistent throughput and less scrap. Discuss application-specific recommendations for the Tungaloy VCMT110302-TSF T9225 with Metav Werkzeuge—contact our team for tailored advice and procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951524 Manufacturer SKU: TUN6951524 SKU: 6951524-Tungaloy Model series: ISO turning inserts Designation: VCMT110302-TSF Grade: T9225 Material: carbide Facts Relief/clearance angle: 7° Included angle / nominal angle: 35° Corner radius: 0.2 mm Plate thickness: 3.18 mm Plate size: 11 mm Special features TSF chipbreaker Rhombic insert form Cylindrical hole + single-side countersink (40°–60°) CVD-coated carbide Intended use: external and internal turning FAQ What materials is this insert suitable for? The VCMT110302-TSF T9225 is specified as a robust universal grade for steel machining; the CVD-coated carbide and TSF chipbreaker suit medium-to-heavy steel turning and applications with slight interruptions. Is this insert compatible with standard ISO toolholders? Compatibility depends on holder form, relief angle, tolerance class, clamping and thickness; the rhombic VCMT shape and 7° clearance are made to fit common ISO turning holders designed for VCMT inserts. What cutting tasks is a 0.2 mm corner radius best for? A corner radius of 0.2 mm on this indexable insert is ideal for finishing and light semi-finishing where a fine edge is required and surface finish and dimensional control are priorities. How does the TSF chipbreaker affect chip control? The TSF chipbreaker promotes stable chip formation across varying depths of cut, improving evacuation and reducing the risk of chip interference in both external and internal turning. How should one choose between different insert grades and chipbreakers? Select the chipbreaker and grade according to workpiece material, depth of cut and stability of the setup; the T9225 grade in this insert is recommended where additional toughness is needed for variable engagement or slightly interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110302 T9225 Wendeplatten - Tungaloy
VCMT110302-TM T9225 Drehwendeschneidplatte für Drehen | Tungaloy Die VCMT110302-TM T9225 ist eine ISO-genormte Drehwendeschneidplatte für robustes Außen- und Innendrehen bei mittleren bis schweren Stahleinsätzen ISO-genormt für gängige Spannsysteme CVD-beschichtetes Hartmetall für lange Standzeit Rhombische Form mit 7° Freiwinkel für stabile Schnitte Mit Loch und zylindrischer Senkung für sichere Befestigung Effiziente Zerspanung bei wechselnden Schnittbedingungen Die VCMT110302-TM T9225 liefert eine ausgewogene Kombination aus Zähigkeit und Verschleißfestigkeit dank des CVD-beschichteten Hartmetalls. Diese Sorte ist für mittlere bis schwere Stahlbearbeitung ausgelegt und reduziert Werkzeugwechsel bei wechselnden Eingriffsbedingungen. Durch die robuste Materialauswahl entsteht eine stabile Spanbildung, die die Bearbeitungszeiten verkürzt und die Produktionskosten senkt. Passgenaues System zwischen Platte und Halter für konstante Ergebnisse Die ISO-Normierung garantiert, dass Form, Freiwinkel und Toleranzklasse mit gängigen Außenhaltern kompatibel sind. Die rhombische Plattenform und das zylindrische Loch mit einseitiger Senkung (40°–60°) sorgen für definierte Positionierung und sichere Befestigung. Anwender profitieren von wiederholgenauer Ausrichtung und konstanter Werkstückqualität auch bei höheren Schnittkräften. Zielgerichteter Einsatzbereich und Materialverträglichkeit Diese Wendeschneidplatte ist speziell für das Außen- und Innendrehen von Stahl ausgelegt. Die Sorte eignet sich bei leicht unterbrochenen Schnitten, wenn erhöhte Zähigkeit gefordert ist. Durch den gezielten Spanformer TM bleibt die Spanabfuhr kontrolliert, was die Oberflächengüte und Prozessstabilität verbessert. Anwender, die zuverlässige Ergebnisse in der Serienfertigung benötigen, finden hier eine wirtschaftliche Lösung. Wirtschaftlichkeit und Prozesssicherheit in der Fertigung Die Kombination aus stabiler Spanbildung, hoher Standzeit und ISO-Kompatibilität macht die Platte zu einer wirtschaftlichen Wahl für industrielle Anwendungen. Weniger Ausfallzeiten durch Werkzeugwechsel und die einfache Auswahl passender Halter reduzieren Durchlaufzeiten. Die robuste Bauart unterstützt gleichbleibende Bearbeitungsqualität über lange Laufzeiten und trägt so zur Prozesssicherheit bei. Setzen Sie auf die VCMT110302-TM T9225 von Tungaloy für zuverlässige, produktive Stahlzerspanung; bei Fragen steht das Team von Metav Werkzeuge unter info@metav-werkzeuge.com oder +49 2822 7131930 zur Verfügung Produktmerkmale Artikelnummer: 6951561 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT110302-TM Fakten Radius: 0,2 mm Winkel: 35° Freiwinkel: 7° Plattendicke: 3,18 mm Plattengröße: 11 mm Eckenradius: 0,2 mm Besonderheiten Material: Hartmetall Beschichtung: T9225 (CVD-beschichtet) Plattenform: Rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: TM (Spanformer, für mittlere Spanbildung) Schneidstofftyp: CVD-beschichtetes Hartmetall FAQ Ist die Platte für unterbrochene Schnitte geeignet? Ja. Die VCMT110302-TM T9225 von Tungaloy ist als robuste Universalsorte ausgelegt und verträgt leicht unterbrochene Schnitte durch erhöhte Zähigkeit und stabile Spanbildung. Welche Werkstoffe lassen sich damit primär bearbeiten? Die Platte wurde für die Bearbeitung von Stahl entwickelt; in der Regel kommt sie beim Außen- und Innendrehen von unlegierten und legierten Stählen zum Einsatz. Welche Bedeutung hat der Spanbrecher TM? Der Spanbrecher TM sorgt für kontrollierte Spanformung und erleichtert die Spanabfuhr; das unterstützt konstante Oberflächengüten und reduziert das Risiko von Spanverwicklungen. Wie wichtig ist die ISO-Normierung für die Auswahl des Halters? Die ISO-Normierung der VCMT110302-TM T9225 vereinfacht die Auswahl des passenden Außenhalters, da Form, Freiwinkel, Größe und Dicke standardisiert sind und dadurch Kompatibilität gewährleistet ist. Welche Montageeigenschaften bietet die Platte? Die Platte verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°), was eine sichere Befestigung und präzise Positionierung auf dem Halter ermöglicht. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com