VCMT 110304 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade engineered for stainless steels and an ISO-standard insert form that ensures predictable mounting and repeatable results; the stable cutting edge and PS chipbreaker improve process reliability and chip control in medium turning tasks. Order the insert directly via Metav Werkzeuge or contact their consultants for tailored cutting data. VCMT 110304 AH6225 — ISO rhombic turning insert with PS chipbreaker by Tungaloy VCMT 110304-PS AH6225 is an ISO‑standard rhombic indexable insert designed for external and internal turning of stainless steels and similar materials, combining a sharp, resilient cutting edge with a universal coating and chipbreaker for varying machining conditions PVD-coated carbide AH6225 for stainless steel PS chipbreaker for reliable chip control ISO rhombic VCMT 110304 form for standard holders Cylindrical hole with 40°–60° countersink Improve process stability with a wear‑resistant grade The AH6225 grade is a PVD‑coated carbide designed to balance sharpness and edge stability, which translates into consistent component quality during medium turning operations. For materials prone to work hardening, such as stainless steel, this combination reduces the likelihood of built‑up edge and improves surface finish while maintaining acceptable tool life. The coating enhances resistance to adhesive wear at elevated temperatures, so cycle times can remain competitive without sacrificing repeatability. ISO compatibility for fast tool changes and predictable clamping The ISO VCMT 110304 geometry ensures compatibility with a wide range of standard external holders and boring bars; the insert’s rhombic shape and specified dimensions (11 mm size, 3.18 mm thickness) allow secure clamping and straightforward indexability. The insert features a cylindrical hole with a one‑sided countersink (40°–60°), matching common clamping systems and simplifying spare‑part management. A defined 0.4 mm corner radius gives a stable cutting edge for general finishing passes while allowing occasional light profiling. Practical guidance for machining and chip control The incorporated PS chipbreaker is tuned for medium cutting depths and varying operating conditions; it promotes predictable chip formation and evacuation in both external and internal turning. Select feeds and speeds that match the material and machine rigidity, and consider the grade’s strengths in coping with intermittent cuts and changing cutting temperatures. The insert family forms part of a complete indexable system — insert, holder, clamp and screws — enabling efficient changeovers and minimal setup time, which benefits batch production and mixed‑series work. For cutting data, application advice or to order VCMT 110304 AH6225 inserts from Metav Werkzeuge, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holders and process parameters. Technical Data Article number: 6831914-Tungaloy Manufacturer article number: 6831914 SKU: TUN6831914 Model series: ISO turning indexable inserts Application: Turning Facts Corner radius: 0.4 mm Thickness: 3.18 mm Size: 11 mm Clearance angle: 7° Wedge angle: 35° ISO code: 110304 Special features Material: PVD-coated carbide (AH6225) Chipbreaker: PS Shape: Rhombic Hole: Cylindrical with one-sided countersink 40°–60° Compatibility: ISO holders and boring bars FAQ What materials is this insert best suited for? The VCMT 110304-PS AH6225 insert is optimised for stainless steel and similar alloys; the PVD coating and grade combination support medium turning where a balance of sharpness and edge stability is required. How does the PS chipbreaker influence machining? The PS chipbreaker promotes consistent chip control in medium-depth cuts and variable conditions, reducing entanglement and improving evacuation in both external and internal turning. Can the insert be used in standard ISO toolholders? Yes; the insert conforms to ISO VCMT 110304 geometry and is compatible with holders and boring bars dimensioned for that form, using the cylindrical hole and countersink for secure clamping. What is the corner radius and how does it affect finish? The insert has a 0.4 mm corner radius, which provides a compromise between strength and the ability to produce good surface finishes on finishing passes. Is the insert part of a complete system with replacement screws and clamps? The insert is intended for use within an indexable system that includes the appropriate holder, clamp and screws; matching components should be selected to the ISO form and tolerance class. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that combines a sharp, stable cutting edge and reliable chip control for consistent mid-range turning performance; order directly via Metav Werkzeuge or request application advice from the consultants. VCMT 110304 AH6225 turning insert by Tungaloy — PVD-coated carbide, 35° cutting angle The VCMT110304-TM AH6225 is a rhombic, ISO-standard turning insert designed for external and internal turning of stainless steels, offering a balance of sharpness and edge stability for medium-duty operations. PVD-coated carbide for stainless steel machining Rhombic VCMT shape with 35° cutting angle TM chipbreaker for stable chip control 0.4 mm corner radius, 3.18 mm thickness Consistent results with a universal PVD-coated carbide grade The AH6225 designation denotes a PVD-coated carbide formulated for broad applicability on stainless steels, providing a combination of wear resistance and a precise cutting edge. This makes the insert suitable for jobs where varying cut depths and intermittent conditions occur. The coating improves abrasive resistance and thermal stability, which translates into longer in-service life and fewer index changes, supporting uninterrupted production and predictable maintenance intervals. ISO-standard geometry that simplifies holder compatibility As an ISO-standard turning insert, the plate’s compatibility depends on the holder’s geometry, relief angle, tolerance class, and fastening method. The rhombic VCMT form with a nominal 35° cutting angle and 7° free clearance enables both finishing and medium turning tasks. The insert’s cylindrical hole with a single-sided countersink (40°–60°) ensures reliable clamping in appropriately matched toolholders, reducing the risk of movement under load and improving repeatability across tool changes. Stable chip formation and improved surface quality The integrated TM chipbreaker is optimised for mid-range turning of stainless steels, promoting short, controlled chips and reducing the likelihood of built-up edge formation. This chip control contributes directly to a more consistent surface finish and reduced vibration, which in turn preserves the integrity of the cutting edge and supports longer tool life. For workshops prioritising throughput and predictable component quality, this behaviour reduces rework and inspection overhead. Practical dimensions and selection guidance for workshop use Key dimensions such as the 11 mm inscribed circle, 0.4 mm corner radius, and 3.18 mm plate thickness align with common toolholder families, simplifying stock planning and tool setups. The VCMT geometry and TM chipbreaker combination suit a wide range of turning tasks, while the PVD-coated carbide substrate provides robust performance across variable conditions. When selecting holders, match form, free angle and tolerance class to ensure correct clamping and to exploit the insert’s full performance potential. For tailored application support and to secure Tungaloy precision inserts, contact Metav Werkzeuge for technical advice and order specification at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Name: VCMT110304-TM AH6225 Manufacturer article number: 6951578 SKU: 6951578-Tungaloy Manufacturer SKU: TUN6951578 Data Corner radius: 0.4 mm Cutting angle: 35° Free clearance: 7° Plate thickness: 3.18 mm Plate size: 11 mm Special features PVD-coated carbide, grade AH6225 TM chipbreaker Rhombic plate geometry VCMT Cylindrical hole + single-sided countersink (40°–60°) ISO-standard turning insert for external and internal turning of stainless steels FAQ What materials is this insert suited for? The VCMT110304-TM AH6225 is formulated primarily for stainless steels, with the PVD-coated carbide substrate providing wear resistance and edge stability under varying turning conditions. Which machining tasks are typical for this insert? Designed for external and internal turning, the insert is best applied to medium machining operations where a balance of surface quality and tool life is required; the TM chipbreaker improves chip control in these scenarios. How does the chipbreaker affect performance? The TM chipbreaker promotes short, controlled chips and stabilises cutting forces, which improves surface finish and reduces the risk of built-up edge on stainless-steel workpieces. What dimensions should be checked to ensure holder compatibility? Verify the holder’s acceptance for a VCMT rhombic plate, the 11 mm inscribed circle, the 3.18 mm thickness, the 7° free clearance and the hole/countersink style to ensure correct clamping and tolerance match. Which SKU and manufacturer numbers identify this product? The item is listed under SKU 6951578-Tungaloy, Manufacturer SKU TUN6951578 and Manufacturer article number 6951578 for ordering and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 AH6225 Wendeplatten - Tungaloy
Combining PVD-coated carbide grade AH6225 with ISO-standard geometry and a secure cylindrical hole, this insert delivers reliable performance for turning stainless steels and consistent edge life under varying conditions. Order directly via Metav Werkzeuge or ask our consultants for application guidance. VCMT 110304 AH6225 rhombic turning insert — ISO-standard PVD-coated carbide by Tungaloy The VCMT110304-PSS AH6225 is an ISO rhombic indexable turning insert designed for external and internal turning, offering a sharp yet stable cutting edge for stainless steel applications. ISO rhombic geometry for versatile turning PVD-coated carbide grade AH6225 Suitable for stainless steels machining Cylindrical hole with countersink fixation Predictable edge life and consistent cutting performance The combination of a PVD-coated surface and a cemented carbide substrate produces a cutting edge that balances sharpness and durability. The AH6225 grade is formulated as a universal option for stainless steels, designed to maintain a stable cutting edge during medium machining operations and when conditions change. PVD coating reduces adhesion and oxidation at the cutting edge, which translates into longer tool life and more predictable regrinds. For production environments that require repeatable results, this geometry and coating combination reduces scrap rates and stabilises cycle times. Secure mounting and ISO compatibility reduce setup time Engineered as an ISO-standard insert, the format ensures compatibility with matching holders when the form, clearance angle 7°, tolerance class, fixing method, size and thickness are observed. The rhombic shape with a cylindrical hole plus single-side countersink (40°–60°) provides reliable clamping and repeatable seating on the toolholder. The standardised dimensions — including 11 mm size and 3.18 mm thickness — make inventory management simpler and permit rapid changeovers, reducing auxiliary downtime and contributing to overall process efficiency. Optimised chip control and application guidance for turning The integrated PSS chipbreaker is tuned for controlled chip formation when turning stainless steels and similar materials, helping to avoid long, stringy chips that can foul the workpiece or tool. With a corner radius of 0.4 mm, the insert supports fine finishing as well as modest material removal rates, depending on holder rigidity and cutting parameters. Where vibration or heat might be present, selecting lower depths of cut or adjusted feed rates will maintain surface quality; the insert’s design supports such optimisation without sacrificing edge integrity. For users less familiar with chipformer types, PSS provides a balance between smooth surface finishes and reliable chip control. Practical benefits for production and toolroom environments Using an indexable format simplifies stockkeeping and lowers machining costs compared with brazed or solid tools when many turning operations are required. The VCMT110304-PSS AH6225 insert is suitable for both shop-floor and high-mix environments because it is adaptable: different holders and clampings enable use across external and internal faces. The ISO conformity and clear dimensional data support straightforward integration into existing tool setups and CAM libraries, making it a pragmatic choice for workshops seeking to maintain steady throughput and reproducible component quality. Contact Metav Werkzeuge for application-specific recommendations on the Tungaloy VCMT110304-PSS AH6225 insert or to reserve stock; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6831901 SKU: 6831901-Tungaloy Model series: ISO turning inserts Material: carbide Grade/sort: AH6225 Designation: VCMT110304-PSS AH6225 Facts Corner radius: 0.4 mm Insert size: 11 mm Thickness: 3.18 mm Clearance angle: 7° Cutting angle: 35° Special features PVD-coated cemented carbide (AH6225) PSS chipbreaker for controlled chips Rhombic insert shape (VCMT format) Cylindrical hole with single-side countersink (40°–60°) ISO-compatible geometry for standard holders FAQ Which materials is this insert best suited for? The VCMT110304-PSS AH6225 insert is specified as a universal grade for stainless steels, performing well under variable cutting conditions and medium machining tasks. How is compatibility with toolholders determined? Compatibility depends on the insert form, clearance angle, tolerance class, fixing method, size and thickness; the VCMT110304-PSS format follows ISO dimensions and fits matching rhombic holders when these parameters align. What does the PSS chipbreaker deliver in practice? PSS is a chipformer designed to produce short, controlled chips during turning, improving process stability and surface finish when machining stainless steels with the AH6225 grade. What are the critical dimensions to check before fitting? Key dimensions to verify are insert size 11 mm, thickness 3.18 mm, and corner radius 0.4 mm, along with the hole and countersink style for proper clamping. How does the PVD coating benefit production runs? The PVD coating on the AH6225 grade reduces edge adhesion and thermal wear, resulting in longer tool life and more consistent component quality across extended production runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp yet stable cutting edge, universal PVD‑coated carbide grade and ISO compatibility for consistent stainless‑steel turning results; order directly via Metav Werkzeuge or ask the consultants for tailored application advice. VCMT110304-TSF AH6225 — ISO turning insert for stainless‑steel turning, PVD‑coated carbide — Tungaloy A VCMT110304-TSF AH6225 indexable insert engineered for external and internal turning of stainless steels, offering a balance of sharpness and edge stability for medium turning operations PVD-coated carbide, grade AH6225 ISO VCMT 110304 rhombic insert 0.4 mm nose radius for fine turning Cylindrical hole + 40°–60° countersink Consistent performance for stainless‑steel turning The PVD-coated carbide composition and the AH6225 grade provide a universal solution optimised for stainless steels under varying cutting conditions. The coating improves wear resistance and heat management, which extends tool life during medium cutting operations, while the substrate maintains toughness to resist chipping. This combination enables a steady machining process and reduces unexpected interruptions, delivering measurable gains in throughput and process reliability. Precision geometry that improves surface quality and repeatability With a 0.4 mm nose radius and 7° relief angle, the insert supports fine finishing passes and contributes to a consistent surface texture. The rhombic shape and the insert geometry reduce the need for frequent adjustments in setup, helping to keep tolerances stable across repeat parts. The TSF chipbreaker is designed to control chip formation in turning applications, lowering the risk of built-up edge and improving dimensional repeatability on batch production runs. System compatibility and mounting clarity for secure use Specified as an ISO VCMT 110304 insert, compatibility with holders is determined by form, relief angle, tolerance class, fastening method, size and thickness. The insert’s cylindrical hole with one‑sided countersink (40°–60°) ensures reliable clamping and minimal movement under cutting forces when matched with the correct external holder or boring bar. Clear system integration reduces setup time and supports predictable tool change procedures in CNC turning centres. Practical choice for workshops and production environments The balanced combination of a sharp cutting edge and a stable substrate makes this indexable plate suitable for shops seeking a single, versatile grade for a variety of stainless‑steel jobs. The design focuses on productive metal removal with good chip control and repeatable results, reducing scrap rates and downtime. For operations requiring consistent performance across shifts and operators, the insert offers an economical route to higher process stability. For dependable, production‑ready results with Tungaloy AH6225 inserts, contact Metav Werkzeuge for application support and fast supply via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6951536 SKU: 6951536-Tungaloy Manufacturer SKU: TUN6951536 Label: VCMT110304-TSF AH6225 Model series: ISO turning indexable inserts Application: Turning Facts Nose radius: 0.4 mm Thickness: 3.18 mm Size: 11 mm Relief angle: 7° Insert angle: 35° Special features Carbide material, PVD coating Grade AH6225, universal for stainless steels TSF chipbreaker Rhombic plate form Cylindrical hole + one-sided countersink (40°–60°) ISO designation VCMT110304-TSF FAQ What materials is this insert designed for? The AH6225 grade and PVD coating of the VCMT110304-TSF insert are optimised for machining stainless steels and adjustable to a range of medium turning tasks. Which geometry details affect clamping and compatibility? Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; the VCMT110304-TSF includes a cylindrical hole with a one‑sided countersink for secure mounting. How does the TSF chipbreaker influence machining? The TSF chipbreaker on this insert controls chip formation during turning, improving chip evacuation and reducing the likelihood of built‑up edge in stainless‑steel operations. Can this insert be used for internal and external turning? Yes, the insert’s rhombic form and measured geometry make it suitable for both external and internal turning when paired with the appropriate holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 AH6235 Wendeplatten - Tungaloy
Combining the PVD-coated AH6235 grade with the PSS chipbreaker and a 0.4 mm nose radius yields a robust turning solution that resists chipping and maintains stable surface finish under interrupted cuts. Order the insert directly via Metav Werkzeuge or consult our technical advisers for tailored application support. VCMT 110304 AH6235 indexable turning insert, PVD-coated carbide, PSS chipbreaker — Tungaloy The VCMT 110304 AH6235 is an ISO-standard rhombic indexable insert for turning, designed for demanding work on rostfreier Stahl and interrupted-cut conditions. PVD-coated carbide AH6235 for toughness PSS chipbreaker for reliable chip control ISO rhombic VCMT form, 0.4 mm nose radius High-performance cutting where breakage risk is elevated The combination of a PVD-coated carbide grade and a specialised chipbreaker addresses the principal risk in interrupted turning: chipping. The tougher AH6235 grade is formulated to absorb shock loads and reduce edge fracture, which results in longer tool life and fewer unexpected insert changes. The built-in PSS chipbreaker shapes swarf and reduces the risk of entangling chips, improving process security when machining rostfreier Stahl or unstable workpieces. This means steadier cycle times and a clearer path to predictable production output. Consistent geometry for repeatable, precise turning An ISO-conforming insert geometry guarantees compatibility with a broad range of holders and clamping systems. The VCMT110304-PSS format, with a 0.4 mm nose radius, 7° clearance and a 35° approach angle, offers a balance between edge strength and surface finish capability. Dimensional conformity and the standardised hole and countersink ensure reliable clamping and repeatable positioning, reducing setup variability. For shops targeting reproducible part quality, these characteristics minimise rework and support leaner process planning. Seamless integration into existing turning systems The insert is intended for use with a matching external holder or boring bar, including the appropriate backing and clamping kit. A cylindrical hole with a single-sided countersink (40°–60°) secures the insert against rotation and axial movement, simplifying indexing operations on the machine. With a 3.18 mm plate thickness and 11 mm size, the insert fits standard ISO toolholders while enabling straightforward replacement and inventory management. Where uncertainty exists about holder compatibility or grade selection for specific workpiece materials, technical guidance is available to align cutting parameters and holder choice with expected process stability. Contact Metav Werkzeuge for practical advice on integrating Tungaloy turning inserts into production; technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6890224 Manufacturer SKU: TUN6890224 Internal SKU: 6890224-Tungaloy Data Radius: 0.4 mm Approach angle: 35° Clearance angle: 7° Plate thickness: 3.18 mm Size: 11 mm Special features ISO rhombic insert VCMT110304-PSS Chipbreaker: PSS Grade: AH6235, PVD-coated carbide Hole: cylindrical hole with single-sided countersink (40°–60°) Application: Turning; suitable for rostfreier Stahl and interrupted cuts FAQ What materials is this insert suitable for? The VCMT110304-PSS AH6235 insert is formulated for rostfreier Stahl and is also suitable where interrupted cuts increase breakage risk. How does the AH6235 grade influence tool life? The AH6235 PVD-coated carbide grade provides improved toughness and edge stability, which extends effective tool life under shock-prone or rough conditions. Which chip control can be expected from the PSS breaker? The PSS chipbreaker on this insert promotes short, controllable chips, reducing swarf issues and enhancing process security during turning operations. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions for the VCMT110304 form and is compatible with holders matching the form, size and clamping specifications; ensure correct clamp and seat geometry. What is the manufacturer SKU and article number for ordering? Manufacturer SKU: TUN6890224; Article number: 6890224 (Tungaloy) Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 AH725 Wendeplatten - Tungaloy
VCMT110304-PSF AH725 ISO-Drehwendeschneidplatte für Drehen von Tungaloy Die VCMT110304-PSF AH725 ist eine ISO-genormte rhombische Wendeschneidplatte mit PVD-beschichtetem Hartmetall, entwickelt für sicheres Außen- und Innendrehen bei wechselnden Werkstoffen. Vielseitige AH725-Sorte für Stahl und rostfreie Stähle Rhombische Form, 11 mm Plattengröße für feine Schnitte Eckenradius 0,4 mm für präzise Konturen PVD-Beschichtung erhöht Standzeit und Prozesssicherheit Mit zylindrischem Loch und einseitiger Senkung für einfache Befestigung Höhere Prozesssicherheit durch universelle Schneidsorte Die AH725-Sorte bietet eine ausbruchfeste, universelle Lösung für das Drehen von Stahl und rostfreien Stählen. Durch die PVD-Beschichtung bleibt die Schneidkante länger stabil, was besonders bei wechselnden Werkstoffen und kleinen Werkzeugaufbauten Ausfallzeiten reduziert. Anwender profitieren von konstanter Oberflächengüte und verlässlicher Spanbildung, sodass Rüstzeiten und Nacharbeit minimiert werden. Präzise Geometrie für feine Bearbeitungen Die rhombische Plattenform mit Eckenradius 0,4 mm und einem FreiWinkel 7° ermöglicht kontrolliertes Spanverhalten und saubere Schnittkanten. Mit einer Plattendicke von 3,18 mm und der Plattengröße 11 mm ist die Platte optimal für präzise Außen- und Innendreharbeiten geeignet. Diese Geometrie unterstützt wiederholgenaue Ergebnisse bei kleinen Schnitttiefen und reduziert Werkstückausschuss. ISO-Kompatibilität und einfache Montage Als ISO-genormte Wendeschneidplatte passt die Ausführung zur gängigen Halterpalette, wobei Form, FreiWinkel, Toleranzklasse, Befestigung, Größe und Dicke die Kompatibilität bestimmen. Die Platte kommt mit Loch und zylindrischem Loch plus einseitiger Senkung (40°–60°), was die Montage mit Unterlage, Klemmsatz und Ersatzschrauben vereinfacht und für sichere Fixierung sorgt. Wirtschaftlichkeit durch Standfestigkeit und Prozessstabilität Die Kombination aus robustem Hartmetall-Schneidstoff und PVD-Beschichtung sorgt für lange Standzeit und stabile Spanbildung. Das reduziert Maschinenstillstand und Werkzeugwechsel, steigert die Produktivität und senkt die Stückkosten. Besonders in Serienprozessen mit wechselnden Werkstoffen überzeugt die Sorte durch gleichbleibende Performance und einfache Sortenzuordnung. Für produktive Zerspanung empfehlen wir die AH725-Sorte von Tungaloy zur Kombination aus Prozesssicherheit und Wirtschaftlichkeit. Bei Fragen zur Einsatzoptimierung oder zur Kompatibilität mit Haltern beraten wir gern unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 6864951 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT110304-PSF AH725 SKU: 6864951-Tungaloy Fakten Eckenradius: 0,4 mm Winkel: 35° FreiWinkel: 7° Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Beschichtung: PVD Material: Hartmetall Sorte: AH725 (universelle, ausbruchfeste Sorte für Stahl und rostfreie Stähle) Spanbrecher: PSF Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatzgebiet: Außen- und Innendrehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben Kompatibilität: ISO-genormt FAQ Welche Werkstoffe lassen sich mit dieser Platte bearbeiten? Die VCMT110304-PSF AH725 von Tungaloy eignet sich vor allem für Stahl und rostfreie Stähle; die AH725-Sorte ist universell und ausbruchfest, wodurch sie flexibel bei wechselnden Werkstoffen einsetzbar ist. Welche Geometrieempfehlungen gelten für feine Konturen? Für feine Konturen bietet die rhombische Plattenform mit Eckenradius 0,4 mm und FreiWinkel 7° eine gute Kombination aus Stabilität und Genauigkeit; die VCMT110304-PSF AH725 liefert dabei wiederholgenaue Ergebnisse. Wie wird die Platte am Halter fixiert? Die Platte ist ISO-genormt und verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°); sie wird mit Unterlage, Klemmsatz und entsprechender Schraube am Halter befestigt, wie bei der SKU 6864951-Tungaloy empfohlen. Welche Vorteile bietet die PVD-Beschichtung? Die PVD-Beschichtung erhöht die Verschleißfestigkeit und verbessert die Standzeit; bei der AH725-Sorte führt das zu stabiler Schneidkante und besserer Prozesssicherheit, besonders bei wechselnden Einsatzbedingungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of proven process security, a universal PVD-coated grade and compact geometry for reliable turning operations; order directly via Metav Werkzeuge or consult the technical team for application support. VCMT 110304 AH725 ISO turning insert — PVD-coated carbide, PS chipbreaker (Tungaloy) A VCMT110304-PS AH725 ISO turning insert engineered for external and internal turning, offering a universal, breakage‑resistant grade suitable for mixed steels and stainless steels. *PVD-coated carbide grade AH725 for process security *Universal, breakage-resistant grade for steel and stainless steels *Rhombic VCMT shape with 7° clearance angle *Central hole with cylindrical seat and single-sided countersink 40°–60° Longer tool life and consistent performance for mixed steels The PVD-coated cemented carbide grade AH725 combines wear resistance and stable edge behaviour to support uninterrupted production. As a universal, breakage-resistant grade, it reduces the need for frequent insert changes when machining both steel and stainless steels, which improves uptime and lowers tool handling overhead. The chipbreaker PS promotes predictable chip formation, thereby stabilising the cutting process and helping to maintain consistent surface quality with fewer interventions. Geometry engineered for reliable clamping and simple indexing The rhombic VCMT geometry with a 35° design and 7° clearance ensures broad compatibility with standard ISO turning holders. Key dimensions such as 3.18 mm thickness, insert size 11 and a 0.4 mm radius provide mechanical stability and repeatable positioning in the pocket. A central hole with a cylindrical seat and a single-sided countersink (40°–60°) secures the insert reliably; compatibility to a specific holder is determined by shape, clearance angle, tolerance class, fastening, size and thickness, which simplifies selection in modular tool systems. Ready-to-install system advice and application scope Designed for both external and internal turning, this insert is typically used with an appropriate external holder or boring bar, plus a shim/clamping set and replacement screws to complete the system. The combination of a universal grade and the PS chipbreaker makes the insert suitable for a range of operations from medium finishing to general turning where process security and predictable tool life are priorities. For demanding feeds or interrupted cuts, the compact corner radius and the PVD coating contribute to reduced flank wear and improved edge stability. Contact Metav Werkzeuge for application advice on Tungaloy PVD-coated AH725 inserts and to confirm the ideal holder and clamping set for the required turning task — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6856692 Manufacturer SKU: TUN6856692 Marketplace SKU: 6856692-Tungaloy Model series: ISO turning inserts Core data ISO designation: 110304 Insert size: 11 Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 7° Geometry angle: 35° Hole: cylindrical hole + single-sided countersink 40°–60° Special features Material: cemented carbide (Hartmetall) Coating: PVD Grade: AH725 Chipbreaker: PS Shape: rhombic (VCMT) Typical application: external and internal turning System components: insert + holder + shim/clamping set + spare screws Compatibility notes: determined by shape, clearance, tolerance, fastening, size, thickness FAQ Is this insert suitable for stainless steels? The VCMT110304-PS AH725 is designed as a universal, PVD-coated grade for machining both steel and stainless steels, offering improved process security and reduced risk of edge chipping. Which holders are compatible with this VCMT geometry? Compatibility depends on the rhombic VCMT form, 7° clearance and the insert dimensions; select a holder that matches the insert shape, tolerance class, fastening method, size 11 and 3.18 mm thickness. What type of chip control does the PS chipbreaker provide? The PS chipbreaker promotes short, controllable chips for general turning and medium finishing, aiding swarf evacuation and stabilising cutting forces on the Tungaloy insert. Can the insert be used for internal boring operations? Yes, the design supports both external and internal turning when combined with an appropriate boring bar and correct clamping components within the system. How can tool life be optimised with this insert? Optimise cutting data to suit AH725, ensure secure clamping in a compatible holder, and maintain appropriate coolant or lubrication strategy to extend edge life and stabilise the process. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 AH8005 Wendeplatten - Tungaloy
Take advantage of PVD-coated AH8005 carbide and a PS chipbreaker for durable, predictable performance in stable turning operations; the ISO-conformant geometry ensures straightforward holder compatibility and reliable chip control. Order via Metav Werkzeuge or consult our team for process-matching advice. VCMT110304-PS AH8005 — Indexable turning insert (PVD-coated carbide, 0.4 mm radius) by Tungaloy A VCMT110304-PS AH8005 indexable turning insert engineered for stable external and internal turning of heat‑resistant alloys and other hard materials. PVD-coated wear-resistant AH8005 grade PS chipbreaker for consistent chip control ISO VCMT geometry for wide holder compatibility 0.4 mm corner radius for precise finishing Greater productivity through consistent wear resistance The combination of a PVD-coated surface and the AH8005 grade carbide delivers extended tool life under demanding conditions, especially when machining heat‑resistant alloys and challenging steels. The coating reduces flank wear and helps maintain cutting-edge integrity, which translates into fewer insert changes and more predictable cycle times. For production environments where repeatability matters, these characteristics support a steady process and reduced secondary handling. Reliable chip control for safer, cleaner machining The PS chipbreaker is optimised for stable cutting conditions and produces short, controllable chips in typical turning operations. Good chip control reduces the risk of entanglement and improves surface finish while easing automated chip removal. For shops aiming to reduce downtime caused by poor chip evacuation, this geometry promotes safe, continuous machining and supports higher feed rates where the setup and workpiece rigidity permit. ISO conformity and practical compatibility with holders Built to ISO specifications, this insert’s VCMT shape and the 110304 code ensure clear matching to external or internal turning holders by form, clearance angle and thickness. Key geometry values — 0.4 mm radius, 7° clearance, 3.18 mm thickness and the rhombic form — enable straightforward selection of a suitable outside holder or boring bar. The insert’s with hole design (cylindrical hole with single‑side countersink 40°–60°) supports secure mounting and consistent clamping behaviour. Application guidance and process benefits When chosen for stable setups, this grade provides a balance of wear resistance and toughness that favours longer uninterrupted runs and consistent surface quality. Selecting the correct chipbreaker and grade according to workpiece material and rigidity is decisive: the AH8005 grade is particularly appropriate for heat‑resisting alloys and harder workpiece types. For those less familiar with insert selection, pairing the geometry with a matching holder and proper cutting parameters will yield the most reliable results. Discuss application requirements with Metav Werkzeuge to select the ideal Tungaloy VCMT110304-PS AH8005 insert for stable turning of heat‑resistant alloys — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6775809 Manufacturer SKU: TUN6775809 Label / SKU: 6775809-Tungaloy Facts ISO designation: 110304 Corner radius: 0.4 mm Thickness: 3.18 mm Size: 11 mm Clearance angle: 7° Included angle: 35° Hole: with hole (cylindrical + one‑side countersink 40°–60°) Special features Rhombic plate shape PS chipbreaker PVD-coated carbide grade AH8005 Suitable for heat‑resistant alloys and hard materials Designed for external and internal turning Compatible with ISO-standard turning holders FAQ What materials is this insert suited for? The insert is designed for machining heat‑resistant alloys and other hard materials; the AH8005 grade provides wear resistance suited to these materials. How does the PS chipbreaker affect performance? The PS chipbreaker produces short, controlled chips that improve chip evacuation and surface finish in stable turning operations. Which holders are compatible with this ISO geometry? Holders that accept VCMT110304 ISO inserts and match form, clearance angle, tolerance class, fastening method, size and thickness will be compatible. What does the 0.4 mm radius mean for the finished part? A 0.4 mm corner radius offers a balance between edge strength and the ability to achieve fine surface finishes on external and internal profiles. Is this insert supplied with a hole specification? Yes — the insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 110304 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated carbide AH8015, a TM chipbreaker and a compact 0.4 mm corner radius to ensure stable cutting performance in turning operations; order via Metav Werkzeuge or consult our specialists for application advice. VCMT 110304 AH8015 ISO turning insert — PVD‑coated carbide, TM chipbreaker by Tungaloy The VCMT110304-TM AH8015 is an ISO‑standard turning insert optimised for external and internal turning of heat‑resistant alloys, offering a balanced mix of wear resistance and edge stability. PVD‑coated cemented carbide AH8015 TM chipbreaker for general turning 0.4 mm corner radius for edge strength ISO rhombic insert, 11 mm size Predictable chip control for higher productivity The TM chipbreaker geometry provides consistent chip formation, reducing the risk of long, stringy chips and improving cycle predictability. This results in fewer interruptions for chip clearing and a more stable process in both face and cylindrical turning. The chipcontrol advantage is particularly relevant when processing tough, heat‑resistant alloys where uncontrolled chips can reduce throughput and increase downtime. By favouring a controlled chip shape, the insert contributes directly to shorter cycle times and a steadier surface finish. Durable cutting edge through PVD coating and carbide substrate A PVD‑coated cemented carbide substrate with the AH8015 grade delivers a balanced combination of wear resistance and edge stability for demanding materials. The physical vapour deposition layer improves thermal and abrasive resistance without compromising toughness, which is essential for machining alloys that generate high temperatures. In practical terms, this means extended tool life and fewer indexings or insert changes, translating into lower tool consumption and more consistent part quality over longer production runs. Fast, secure clamping and ISO compatibility for easy changeovers Built to ISO dimensions and bearing a rhombic plate form, the insert is compatible with a wide range of standard external holders and boring bars, provided form, relief angle, tolerance class, fastening method, size and thickness match. The cylindrical hole with single‑sided countersink (40°–60°) ensures reliable seating and repeatability during clamping. These features permit quick changeovers and consistent positioning, helping to reduce setup time and maintain process accuracy across shifts or jobs. Application advice: material range and geometry selection This grade is a first choice for general machining of heat‑resistant alloys, offering a compromise between abrasive wear resistance and edge robustness. The 0.4 mm corner radius gives a solid cutting edge that improves corner strength and helps avoid premature chipping in interrupted cuts; however, it also affects surface finish and cutting forces, so selection should match part tolerance and machine rigidity. The insert’s 35° lead angle and 7° relief angle support a versatile cutting approach for both external and internal turning. For finer finishes or very thin walls, a smaller radius or different chipbreaker might be more suitable. For precision turning tasks with Tungaloy quality, request availability of the VCMT110304‑TM AH8015 through Metav Werkzeuge; technical application advice and faster delivery are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6951579 SKU: 6951579‑Tungaloy Manufacturer SKU: TUN6951579 Manufacturer article number: 6951579 ISO designation: VCMT110304‑TM Facts Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 mm Lead angle: 35° Relief angle: 7° Design and special features Grade/coating: AH8015 (PVD‑coated) Substrate: cemented carbide Chipbreaker: TM Plate form: rhombic Hole: cylindrical hole with single‑sided countersink (40°–60°) Model series: ISO turning inserts Intended application: turning (external and internal) FAQ What materials is this insert suitable for? The VCMT110304‑TM AH8015 insert is designed primarily for heat‑resistant alloys and offers a balanced wear resistance and edge stability suitable for general turning applications. How does the TM chipbreaker affect machining? The TM chipbreaker on the VCMT110304‑TM provides consistent chip control for safer, more predictable machining and helps reduce interruptions caused by poor chip evacuation. Is this insert compatible with standard ISO holders? Yes; the insert follows ISO dimensions, so compatibility depends on matching holder form, relief angle, tolerance class, fastening method, size and thickness to the insert specifications. What does the 0.4 mm corner radius mean for surface finish and strength? A 0.4 mm corner radius increases edge strength and resistance to chipping, improving tool life in interrupted cuts; it may raise cutting forces and slightly affect achievable surface finish compared with a smaller radius. Which product identifiers should be quoted when ordering? Quote the designation VCMT110304‑TM AH8015 and the article number 6951579 or manufacturer SKU TUN6951579 to ensure the correct item is supplied. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 110304 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH8015 grade and the TSF chipbreaker for steady chip control and extended edge stability in demanding turning. The rhombic ISO form with a 0.4 mm corner radius and 7° clearance angle ensures reliable compatibility with standard holders. Order genuine inserts via Metav Werkzeuge or consult our specialists for application advice. VCMT 110304 AH8015 — ISO turning insert for turning (Tungaloy) The VCMT110304-TSF AH8015 is an ISO-standard rhombic turning insert engineered for external and internal turning of heat-resistant alloys and general turning tasks ISO VCMT 110304 for wide holder compatibility PVD-coated AH8015 for heat-resistant alloys TSF chipbreaker for controlled chip formation Rhombic shape with 7° clearance angle Consistent performance for heat-resistant alloys and general turning The combination of a PVD-coated surface and the AH8015 carbide grade provides a balanced mix of wear resistance and edge stability, which benefits operations on heat-resistant alloys where thermal load is high. The coating reduces adhesion and improves resistance to built-up edge, while the carbide substrate preserves the cutting edge under intermittent and continuous cutting. As a result, the insert supports longer tool life and reduces unscheduled indexings, helping maintain output quality and process consistency. Predictable chip control and improved surface finish The TSF chipbreaker is designed to produce short, manageable chips in both external and internal turning, lowering the risk of entanglement and improving swarf evacuation. Controlled chip formation contributes directly to a stable surface finish, because consistent chip flow reduces vibration and keeps cutting conditions uniform. In practice, this means fewer secondary operations and a better first-pass finish, which is particularly valuable for serial production and components with tight surface requirements. Straightforward integration into ISO holder systems The insert follows the ISO 110304 designation and the rhombic geometry aids simple retrofitting into compatible holders. Compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness; the 7° clearance and 3.18 mm thickness make this insert suitable for a broad range of standard external holders and boring bars. Clear identification and ISO conformity reduce setup time and simplify tool inventory management in machine shops. Efficiency gains through design and edge preparation A 0.4 mm corner radius provides a compromise between strength and edge sharpness, allowing comfortable feed and depth ranges without excessive stress on the cutting edge. The insert’s geometry and material selection are aimed at balancing productivity and repeatable performance, reducing downtime for tool changes. Using appropriately selected cutting parameters with this insert typically yields stable cutting forces, predictable wear progression and an economical ratio of cutting time to tool life. For precision turning of heat-resistant alloys and general turning tasks, contact Metav Werkzeuge for genuine Tungaloy VCMT110304-TSF inserts and tailored application support. Technical data Article number: 6951538 Manufacturer SKU: TUN6951538 SKU: 6951538-Tungaloy Model series: ISO turning indexable inserts Designation: VCMT110304-TSF AH8015 Facts Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 mm Clearance angle: 7° Wedge angle: 35° Manufacturer article number: 6951538 Special features PVD-coated carbide Grade AH8015 TSF chipbreaker Rhombic plate form With hole: cylindrical hole + single-sided countersink (40°–60°) ISO format for external and internal turning Compatible with holders matched by form, clearance, tolerance, clamping, size and thickness FAQ What materials is this insert best suited for? The insert, supplied as VCMT110304-TSF AH8015, is intended primarily for heat-resistant alloys and general turning; the AH8015 grade offers a balance of wear resistance and edge strength suitable for those materials. How does the TSF chipbreaker affect machining? The TSF chipbreaker on the VCMT110304-TSF promotes short, controllable chips, improving swarf evacuation and contributing to a consistent surface finish during turning operations. Which holders will accept this insert? Being ISO 110304, the insert fits standard holders designed for VCMT-format rhombic plates; compatibility is determined by holder form, clearance angle, tolerance class, clamping method, size and thickness. What are the key dimensional limits to consider when setting up? Key dimensions to consider include the corner radius 0.4 mm, plate thickness 3.18 mm, plate size 11 mm and 7° clearance angle to ensure correct seating and cutting geometry. Is this an original Tungaloy product and where can it be obtained? This is an original Tungaloy turning insert (VCMT110304-TSF AH8015). Genuine items can be sourced through Metav Werkzeuge; consult their technical advisers for application-specific recommendations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated AH8015 grade and a PS chipbreaker for consistent machining of heat‑resistant alloys; paired with the rhombic geometry and 35° approach, this yields stable cutting and reproducible surface quality. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. VCMT 110304 AH8015 – ISO Turning Insert VCMT110304-PS for Turning (Tungaloy) VCMT 110304 AH8015 is an ISO‑standard indexable insert designed for external and internal turning, offering a balanced mix of wear resistance and edge stability for demanding alloys. PVD-coated carbide grade AH8015 Rhombic insert, size 11 mm, 35° approach PS chipbreaker optimised for heat-resistant alloys Cylindrical hole with single-side countersink Consistent performance for heat‑resistant alloys The VCMT110304-PS AH8015 insert combines a PVD‑coating with a robust carbide substrate to deliver an even compromise between abrasion resistance and cutting-edge stability. This configuration ensures longer tool life when machining temperature‑resistant materials and reduces the frequency of index changes, which in turn keeps cycle times predictable and tool‑change downtime low. The chosen grade performs well across interrupted and continuous cuts, making it a practical first choice for general turning tasks on high‑temperature alloys. Geometry and clamping designed for repeatable accuracy A stable cutting process starts with predictable geometry: the rhombic form and 11 mm size provide a compact footprint that suits many standard external holders and boring bars. The 35° approach angle improves chip flow and reduces radial cutting forces, while the 7° relief helps prevent rubbing at the flank. Compatibility with a holder is determined by form, relief angle, tolerance class, clamping method, size and thickness; matching these parameters ensures repeatable clamping and concentricity, which translates directly into dimensional accuracy and surface finish consistency. Chip control and system guidance for hassle‑free assembly Effective chip evacuation is essential when turning difficult alloys; the PS chipbreaker is optimised for controlled chip formation and reliable removal under a range of cutting conditions. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) for secure mounting, and its radius 0.4 mm and 3.18 mm thickness support stable cutting edges and increased resistance to edge chipping. For an efficient system, pair the insert with a suitable external holder or boring bar, add the correct shim or clamping kit and keep replacement screws on hand to minimise machine downtime. Contact Metav Werkzeuge for tailored tooling advice and to request a quotation for Tungaloy VCMT inserts; our consultants can recommend the correct holder and grade for specific materials and machining conditions. Technical data Article number: 6775810-Tungaloy Manufacturer article number: 6775810 Manufacturer SKU: TUN6775810 Model series: ISO‑turning indexable inserts Application: Turning Label: VCMT110304-PS AH8015 Facts ISO designation: 110304 Size: 11 mm Thickness: 3.18 mm Relief angle: 7° Approach angle: 35° Corner radius: 0.4 mm Special features Grade: AH8015 Coating: PVD‑coated carbide Chipbreaker: PS Plate shape: rhombic Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Suitable for external and internal turning ISO‑standard compatible geometry FAQ What materials is this insert best suited for? The VCMT110304-PS AH8015 insert is intended primarily for machining heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for such materials. How is the insert mounted in the holder? Mounting uses the cylindrical hole with a single‑side countersink (40°–60°); combine the insert with the correct holder, shim or clamping kit to ensure secure fastening and repeatable positioning. What does the PS chipbreaker deliver in practice? The PS chipbreaker promotes controlled chip formation and efficient evacuation during turning, which helps maintain cutting stability and reduces the risk of built‑up edge on heat‑resistant alloys. Can this insert be used for both external and internal turning? Yes, the insert is suitable for external and internal turning when paired with a compatible external holder or boring bar and the appropriate clamping accessories. What are the key dimensions to check for compatibility with a holder? Ensure the rhombic form, 11 mm size, 3.18 mm thickness, 7° relief and the 35° approach angle match the intended holder specification. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 AT9530 Wendeplatten - Tungaloy
Take advantage of the high-surface-quality performance and even wear offered by a coated cermet grade, combined with the precise geometry of a rhombic ISO insert for reliable finishing operations; order the insert directly via Metav Werkzeuge or ask the consultants for application guidance. VCMT 110304 AT9530 rhombic indexable insert for turning by Tungaloy — coated cermet, PS chipbreaker VCMT110304-PS AT9530 is an ISO rhombic insert designed for finishing and light turning of steel, offering consistent surface quality and controlled wear in stable machining setups. Coated cermet AT9530 for superior surface finish Rhombic VCMT form with 0.4 mm corner radius Cylindrical hole with single-side countersink Optimised chip control with PS chipbreaker Consistent finishing performance for steel turning The coated cermet grade AT9530 is developed specifically for finishing and light machining of steel, where a fine surface finish and even flank wear are decisive. The combination of a fine-grain cermet substrate and proprietary coating ensures reduced built-up edge and a predictable wear pattern, which translates into fewer in-process adjustments and more consistent part quality. The PS chipbreaker supports short, controllable chips in moderately stable conditions, improving handling and reducing secondary operations related to chip entanglement. Straightforward integration into ISO tooling systems Compatibility is determined by geometry and dimensions: form, 7° clearance, tolerance class, fixation, size and 3.18 mm thickness. The rhombic VCMT form and the insert’s 35° included angle make it suitable for a wide range of external and internal turning holders that accept ISO plates of this shape. The cylindrical hole with single-side countersink (40°–60°) guarantees stable clamping in most standard clamping systems. Specifying the holder by matching the insert’s form and mounting features ensures repeatable set-up and reduces the risk of incorrect seating or uneven load distribution. Process reliability, tool life and selection guidance A corner radius of 0.4 mm balances edge strength and surface integrity for finishing passes; smaller radii reduce cutting forces while maintaining the required edge stability for fine surfaces. The coated cermet chemistry provides extended edge life under finish cutting speeds and helps maintain dimensional consistency across batches. For best results, pair the insert with a holder and machining parameters aligned to the workpiece rigidity and intended depth of cut. Selection of the PS chipbreaker and the AT9530 grade should be guided by the combination of workpiece material, machine stability and desired surface specification — when in doubt, a conservative feed and higher cutting speed will often extend life while preserving finish. Contact Metav Werkzeuge today for specification support, availability and tailored advice on Tungaloy VCMT inserts — eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical data Article number: 6773760 Manufacturer SKU: TUN6773760 Model series: ISO-Drehwendeschneidplatten Designation: VCMT110304-PS Grade / coating: AT9530 Material: Hartmetall Facts Corner radius: 0.4 mm Relief angle: 7° Included angle: 35° Plate thickness: 3.18 mm Plate size: 11 mm Special features Chipbreaker: PS Hole style: cylindrical hole + single-side countersink (40°–60°) Shape: rhombic Application: Turning Typical system: ISO insert, compatible external holder or boring bar, clamp set and replacement screws Coated cermet for finishing and light machining of steel FAQ What is the primary application of this insert? The VCMT110304-PS AT9530 is intended for finishing and light turning of steel where a coated cermet insert provides superior surface finish and uniform wear. Which chip control does the insert provide? Equipped with the PS chipbreaker, the insert achieves short, controllable chip forms suitable for stable to moderately stable machining conditions. How is compatibility with holders determined? Compatibility depends on the insert form, 7° clearance, tolerance class, fixing method, plate size and thickness — matching these values to the holder ensures correct seating and clamping. Can this insert be used for internal turning? Yes, the rhombic geometry and mounting hole arrangement make the insert suitable for both external and internal turning when used with the appropriate ISO holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 GT9530 Wendeplatten - Tungaloy
Combining wear-resistant GT9530, PSS chipbreaker and ISO VCMT geometry delivers consistent finishing performance and longer tool life under stable turning conditions — order directly via Metav Werkzeuge or consult our advisors for application-specific selection. VCMT110304-PSS GT9530 – indexable turning insert, coated cermet, 35° by Tungaloy VCMT110304-PSS GT9530 is a coated cermet indexable turning insert engineered for finishing and light general turning on steel Coated cermet grade GT9530 Optimised for finishing and light turning ISO VCMT 110304 geometry 0.4 mm corner radius for fine edge High-performance finishing with proven cermet technology The coated cermet composition of this insert provides a notable balance between wear resistance and a fine cutting edge, leading to superior surface finish in finishing operations. The GT9530 grade is formulated for stable machining conditions, offering extended tool life when chip control and low cutting forces are required. For workshops seeking predictable results on steel, the cemented carbide substrate combined with an engineered coating means fewer indexings and more consistent parts per insert. The PSS chipbreaker supports smooth chip evacuation and helps maintain a uniform cutting process, which contributes directly to throughput and productivity. Compatibility and system considerations for reliable set-up Compatibility with toolholders depends on geometry, relief angle, tolerance class, clamping method, size and thickness. This ISO‑standard insert follows the VCMT footprint and fits holders designed for VCMT 110304 plates; correct selection of clamping and shim elements ensures repeatable seating and safe torque transmission. The standard system build comprises the ISO insert, a matching outer holder or boring bar, a shim/clamp set and replacement screws. Specifying the VCMT110304-PSS designation together with holder type and tolerance requirements prevents misfits and supports process stability on the shop floor. Practical advantages for everyday turning applications Selecting a finishing‑oriented cermet like GT9530 reduces secondary finishing work by producing better part surfaces directly from the cut. The 0.4 mm corner radius helps preserve edge integrity while enabling fine detail, and the 7° relief angle supports low cutting forces for delicate passes. Where consistent part quality and reduced rework matter, the combination of grade, chipbreaker and ISO geometry translates into measurable time savings and lower tool consumption per part — a rational investment for production environments prioritising efficiency. Material scope and recommended use cases This insert is optimised for steel finishing under stable conditions; choose chipbreaker and grade to match workpiece material, machining strategy and machine rigidity. The GT9530 grade excels where a good surface finish and longer tool life are required rather than aggressive roughing. Typical applications include external and internal turning where dimensional accuracy and surface quality are critical. For mixed or unstable setups, consider alternative grades or toolholder arrangements that compensate for vibration and interrupted cuts. For precise finishing with Tungaloy’s coated cermet GT9530, contact Metav Werkzeuge for tailored recommendations and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific turning tasks Technical data Manufacturer article number: 6998409 SKU: 6998409-Tungaloy Manufacturer SKU: TUN6998409 Model series: ISO turning indexable inserts Label: VCMT110304-PSS GT9530 Facts ISO designation: 110304 Corner radius: 0.4 mm Plate size: 11 mm Plate thickness: 3.18 mm Relief angle: 7° Top rake angle: 35° Special features Grade/coating: GT9530 (coated cermet) Chipbreaker: PSS Substrate: cemented carbide Plate form: rhombic (VCMT) Hole: with hole; cylindrical hole + one-side countersink (40°–60°) Typical application: turning System components: insert, outer holder/boring bar, shim/clamp set, spare screws FAQ What materials is this insert suited for? The VCMT110304-PSS GT9530 insert is optimised for steel finishing; the GT9530 coated cermet grade targets stable conditions where surface quality and extended tool life are priorities. How does the PSS chipbreaker influence performance? The PSS chipbreaker on the VCMT110304-PSS aids controlled chip formation and evacuation, promoting a steady cutting process and consistent surface finish when used with appropriate cutting parameters. Which holders are compatible with this ISO insert? Holders designed for VCMT 110304 geometry and matching tolerance classes will accept this insert; compatibility is governed by form, relief angle, tolerance, clamping method, size and thickness. What difference does the 0.4 mm corner radius make? A 0.4 mm corner radius offers a fine cutting edge that improves surface finish and reduces the risk of edge chipping in finishing passes compared with larger radii. Is this insert suitable for interrupted cuts? The GT9530 grade is optimised for stable finishing; for interrupted or highly unstable cuts, consider a different grade or a geometry engineered for impact resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 NS9530 Wendeplatten - Tungaloy
VCMT110304-TSF NS9530 ISO-Drehwendeschneidplatte für Drehen von Tungaloy Die VCMT110304-TSF NS9530 ist eine ISO-genormte Drehwendeschneidplatte für Schlichtanwendungen an Stahl mit scharfer Schneidkante und optimierter Spanbildung Cermet-Schlichtsorte NS9530 Scharfe Schneidkante für hohe Oberflächengüte Rhombische Form 11 mit 7° Freiwinkel Zylindrisches Loch mit einseitiger Senkung 40°–60° Präzision und Werkstoffvorteil für feine Oberflächen Die VCMT110304-TSF NS9530 kombiniert Hartmetall-Trägergeometrie mit einem unbeschichteten Cermet-Schneidstoff, was besonders bei kontinuierlichem Schnitt niedrige Schnittkräfte und eine sehr gute Oberflächengüte ermöglicht. Anwender profitieren von konstanter Bauteilqualität bei Schlichtzyklen, da die scharfe Schneidkante Ausrisse reduziert und die Nachbearbeitung minimiert. Diese Eigenschaft macht die Platte zur Empfehlung für anspruchsvolle Längs- und Stirndrehungen. Einsatzbereich und Bearbeitungsnutzen Konzipiert für das Drehen von Stahl, liefert die Wendeplatte gleichbleibende Ergebnisse bei kleinen Zustellungen und stabilen Schnittbedingungen. Der TSF-Spanbrecher unterstützt eine gleichmäßige Spanform und reduziert das Risiko von Spanverwicklungen. Durch die Kombination aus Form, Freiwinkel und Spanbrecher lässt sich die Produktivität steigern, weil Standzeiten nutzbringend verlängert und Ausfallzeiten reduziert werden. Passgenauigkeit und Maschinenkompatibilität Die rhombische Plattenform in Größe 11 mit 3,18 mm Plattendicke ist ISO-konform und kompatibel mit gängigen Außenhaltern und Bohrstangen. Das zylindrische Loch mit einseitiger Senkung (40°–60°) gewährleistet sichere Befestigung und einfache Wiederholgenauigkeit beim Plattenwechsel. Beim Einrichten empfiehlt sich die Prüfung von Halterform, Freiwinkel und Toleranzklasse, um die volle Leistungsfähigkeit der Platte auszuschöpfen. Zielgruppe, Auswahlhinweis und Wirtschaftlichkeit Entwickelt für Lohnfertiger und Produktionsbetriebe, die Wert auf hohe Oberflächengüten und reproduzierbare Ergebnisse legen. Die Sorte NS9530 ist eine Schlichtsorte, die durch geringe Schnittkräfte wirtschaftliches Arbeiten in Serienfertigung ermöglicht. Durch die reduzierte Nacharbeit amortisiert sich der Einsatz schnell, besonders bei Bauteilen mit engen Rauheitsvorgaben. Empfehlung: Für hochpräzise Schlichtbearbeitung an Stahl die VCMT110304-TSF NS9530 von Tungaloy wählen; bei Fragen steht der technische Vertrieb unter info@metav-werkzeuge.com oder +49 2822 7131930 zur Verfügung Produktmerkmale Bezeichnung: VCMT110304-TSF NS9530 Artikelnummer: 6951539 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller-SKU: TUN6951539 Fakten Eckenradius: 0,4 mm Plattendicke: 3,18 mm Plattengröße: 11 mm Freiwinkel: 7° Winkel: 35° Senkungswinkel Loch: 40°–60° Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet (Schlichtsorte) Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: TSF (für Schlichtanwendungen) Sorte: NS9530 (schlichteigenschaften für Stahl) FAQ Welche Hauptvorteile bietet die VCMT110304-TSF NS9530 bei Schlichtoperationen? Die VCMT110304-TSF NS9530 von Tungaloy liefert durch den unbeschichteten Cermet-Schneidstoff niedrige Schnittkräfte und eine ausgezeichnete Oberflächengüte, wodurch Nachbearbeitung reduziert wird. Für welche Werkstoffe ist diese Wendeschneidplatte vorgesehen? Primär für Stahl; die Sorte NS9530 ist als Schlichtsorte ausgelegt und optimiert für kontinuierlichen Schnitt mit stabiler Spanbildung. Wie wirkt sich der Freiwinkel von 7° auf die Bearbeitung aus? Der Freiwinkel von 7° unterstützt eine schlanke Schneidkantengeometrie, die bei kleinen Zustellungen die Schnittkräfte reduziert und zu einer verbesserten Oberflächengüte beiträgt. Ist die Platte mit handelsüblichen ISO-Außenhaltern kompatibel? Ja, die ISO-genormte Form und die Abmessungen machen die VCMT110304-TSF NS9530 kompatibel zu gängigen Außenhaltern und Bohrstangen, sofern Form, Toleranzklasse und Befestigung übereinstimmen. Welche Bedeutung hat der TSF-Spanbrecher? Der TSF-Spanbrecher ist speziell für Schlichtanwendungen ausgelegt und fördert eine kontrollierte Spanform, wodurch Standzeit und Oberflächenqualität positiv beeinflusst werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110304 NS9530 Wendeplatten - Tungaloy
VCMT110304-PS 110304 NS9530 ISO-Drehwendeschneidplatte für Drehen (Tungaloy) Die VCMT110304-PS 110304 NS9530 ist eine ISO-genormte Drehwendeschneidplatte zur Schlichtbearbeitung von Stahl mit hoher Oberflächengüte und niedrigen Schnittkräften Universelle ISO-Form VCMT Unbeschichtetes Cermet für feine Oberflächen Scharfe Schneidkante für Schlichtanwendungen Eckenradius 0,4 mm für präzise Konturen Mit Loch und zylindrischer Senkung 40°–60° Präzise Schlichtbearbeitung mit niedrigen Schnittkräften Die Wendeschneidplatte wurde als Schlichtsorte konzipiert und liefert bei kontinuierlichem Schnitt ausgezeichnete Oberflächengüte. Durch den unbeschichteten Cermet-Schneidstoff NS9530 entstehen scharfe Schneidkanten und geringe Schnittkräfte, was besonders bei feinen Zustellungen zu stabilen Ergebnissen führt. Anwender profitieren von reduzierter Nacharbeit und reproduzierbarer Teilqualität Materialeigenschaften und Praxisvorteile Der verwendete Hartmetall-Träger kombiniert mit dem unbeschichteten Cermet sorgt für eine ruhige Spanbildung und lange Standzeiten bei Schlichtprozessen. Die Kombination aus scharfer Schneidkante und definiertem Eckenradius verbessert die Oberflächenbeschaffenheit, während die thermische Belastung gegenüber beschichteten Sorten anders zu bewerten ist. Für Anwender bedeutet das weniger Schleifaufwand und gleichbleibende Bauteilqualität Kompatibilität, Plattenmaß und Einbauhinweise Die Platte entspricht der ISO-Form VCMT und ist kompatibel mit handelsüblichen Außenhaltern, sofern Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke übereinstimmen. Der Freiwinkel von 7° und die Plattendicke von 3,18 mm müssen beim Halterabgleich berücksichtigt werden. Die Bohrung mit zylindrischem Loch und einseitiger Senkung ermöglicht sichere Befestigung und exakte Lage im Klemmsatz Anwendungsempfehlung und Werkstofffokus Die Sorte NS9530 ist speziell für die Bearbeitung von Stahl ausgelegt und eignet sich für Außen- und Innendrehen mit kleinen Zustellungen. Zur Wahl des optimalen Spanbrechers (PS) empfiehlt sich die Abstimmung auf Werkstoff, Bearbeitungsart und Zerspanungsstabilität. Bei instabilen Aufspannungen sollten Schnittparameter angepasst werden, um Ausbrüche zu vermeiden Wirtschaftlichkeit und Prozesssicherheit Für Serienfertigung und Präzisionsteile bietet die Platte konstante Ergebnisse bei geringer Nacharbeit. Die robuste Geometrie und die spezifische Sortenwahl sorgen für planbare Werkzeugkosten und verlässliche Austauschintervalle. Anwender erreichen dadurch eine effiziente Fertigung mit gleichbleibender Bauteilqualität Empfehlung: Die VCMT110304-PS 110304 NS9530 von Tungaloy für präzises Schlichtdrehen wählen und bei Fragen die technische Beratung von Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren Technische Daten Artikelnummer: 6998604 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT110304-PS NS9530 Hersteller SKU: TUN6998604 Daten Eckenradius: 0,4 mm Plattendicke: 3,18 mm Plattengröße: 11 mm Winkel: 35° Freiwinkel: 7° Besonderheiten Material: Hartmetall Schneidstoff: unbeschichtetes Cermet (NS9530) — Schlichtsorte für Stahl Spanbrecher: PS — geeignet für kontinuierlichen Schnitt und feine Zustellungen Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) ISO-Form: VCMT FAQ Für welche Bearbeitungen eignet sich die VCMT110304-PS NS9530 am besten? Die VCMT110304-PS NS9530 von Tungaloy ist speziell für Schlichtaufgaben beim Drehen von Stahl entwickelt und erzielt bei kleinen Zustellungen sehr gute Oberflächengüten Welche Maschinenparameter sollten bevorzugt werden? Für die NS9530 empfehlen sich moderate Schnittgeschwindigkeiten und konstante Vorschübe bei kontinuierlichem Schnitt; die genaue Einstellung hängt von Werkstückaufbau und Kühlmittelkonzept ab Ist die Platte für Innen- und Außenbearbeitung verwendbar? Ja, die ISO-Form VCMT erlaubt sowohl Außen- als auch Innendrehen, vorausgesetzt, Halterform und Montage entsprechen den Plattenabmessungen Wie beeinflusst der Eckenradius das Bearbeitungsergebnis? Der Eckenradius von 0,4 mm liefert präzise Konturen und reduziert Gratbildung, was die Oberflächenqualität verbessert und Nacharbeit minimiert Welche Informationen enthält die Herstellerkennzeichnung TUN6998604? Die Kennung TUN6998604 verweist auf die Herstellerreferenz für die VCMT110304-PS NS9530 und erleichtert Ersatzteilbestellung sowie Nachschubplanung Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110304 NS9530 Wendeplatten - Tungaloy
VCMT110304-TM NS9530 — ISO-Drehwendeschneidplatte zum Drehen Die VCMT110304-TM NS9530 ist eine ISO-genormte rhombische Drehwendeschneidplatte für präzises Außen- und Innendrehen mit feiner Schneidkante und niedrigen Schnittkräften Schlichtsorte für hohe Oberflächengüte Unbeschichtetes Cermet für saubere Schneidkante 0,4 mm Eckenradius für feine Konturen 7° Freiwinkel reduziert Schnittkräfte Mit Loch und einseitiger Senkung für sichere Befestigung Hohe Oberflächengüte durch feine Schneidkante Die Kombination aus unbeschichtetem Cermet und einem Eckenradius von 0,4 mm sorgt für besonders glatte Oberflächen bei Schlichtoperationen. Diese Sorte wurde für Stahl konzipiert und bietet bei kontinuierlichem Schnitt niedrige Schnittkräfte, sodass die Teile weniger Nacharbeit benötigen. Anwender profitieren von einem besseren Oberflächenbild bei kleinen Zustellungen und gleichbleibender Konturtreue. Präzise Einsetzbarkeit und Kompatibilität im System Dank der ISO-Genormung lassen sich Form, Befestigung und Größe unkompliziert mit passenden Außenhaltern und Bohrstangen kombinieren. Die Plattenstärke 3,18 mm und die Plattengröße 11 mm gewährleisten stabile Auflageflächen, während das zylindrische Loch mit einseitiger Senkung (40°–60°) eine sichere Klemmung ermöglicht. Dies erleichtert die Prozessabsicherung in Serienfertigung und reduziert Rüstzeiten. Wirtschaftliche Schlichtbearbeitung für Serienprozesse Für Anwender, die auf Effizienz und konstante Qualitätswerte setzen, bietet diese Wendeplatte eine wirtschaftliche Lösung: durch die scharfe Schneidkante werden Schnittkräfte reduziert und Werkzeugbelastung minimiert. Die Sorte NS9530 ist speziell für feine Schlichtoperationen ausgelegt und empfiehlt sich dort, wo hohe Oberflächengüte bei gleichbleibenden Ergebnissen gefragt ist. Empfehlung: Vertrauen Sie auf die Präzision der VCMT110304-TM NS9530 von Tungaloy für hochwertige Schlichtbearbeitung; bei Rückfragen erreichen Sie uns per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Bezeichnung: VCMT110304-TM Artikelnummer: 6951581 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten SKU: TUN6951581 Fakten Eckenradius: 0,4 mm FreiÂwinkel: 7° Winkel: 35° Plattendicke: 3,18 mm Plattengröße: 11 mm ISO-Bezeichnung: 110304 Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Cermet Sorte: NS9530 Spanbrecher: TM Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen Einsatzbereich: Außen- und Innendrehen FAQ Welche Werkstoffe sind für die VCMT110304-TM NS9530 geeignet? Die VCMT110304-TM NS9530 ist als Schlichtsorte primär für Stahl ausgelegt; das unbeschichtete Cermet liefert eine scharfe Schneidkante und niedrige Schnittkräfte für saubere Oberflächen. Welche Halter passen zur VCMT110304-TM NS9530? ISO-genormte Außenhalter und Bohrstangen, die Form, Freiwinkel, Toleranzklasse und Befestigungsart der VCMT110304-TM unterstützen, sind kompatibel; Prüfen Sie Halterdatenblatt auf Ãœbereinstimmung mit 11 mm Plattengröße und 3,18 mm Plattenstärke. Wie beeinflusst der 0,4 mm Eckenradius die Bearbeitung? Der 0,4 mm Eckenradius ermöglicht feine Konturen und reduziert Schneidkräfte bei Schlichtoperationen, was zu besserer Oberflächengüte und geringerer Nacharbeit führt. Wozu dient die einseitige Senkung am Loch der Platte? Die einseitige Senkung gewährleistet eine sichere Spannlage und definierten Sitz in gängigen Haltersystemen, wodurch Vibrationen minimiert und Wiederholgenauigkeit verbessert werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated cermet grade, compact ISO geometry and predictable chip control to achieve consistent finishing results in production turning. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. VCMT 110304 NS9530 VCMT — ISO rhombic turning insert for finishing, 0.4 mm radius — Tungaloy The VCMT110304-PSS NS9530 is an ISO rhombic turning insert designed for finishing operations on steel, offering a sharp cutting edge and low cutting forces for continuous cuts and small depths of cut. ISO rhombic insert VCMT110304-PSS Sharp uncoated cermet grade NS9530 0.4 mm corner radius for fine surfaces PSS chipbreaker for stable chip control Delivering a fine surface finish with low cutting forces The insert combines an uncoated cermet cutting grade (NS9530) with a sharp edge geometry to reduce cutting forces and improve surface quality during finishing passes. Cermet grades merge ceramic hardness with metallic toughness, so the benefit for production is a balance of wear resistance and edge integrity when machining steels under continuous cutting conditions. The result is a reliable surface finish for components where appearance and dimensional accuracy matter, achieved without increasing cutting load or compromising tool life. Geometry and chip control that supports stable production A carefully matched geometry—0.4 mm corner radius, 7° relief and the PSS chipbreaker—keeps chips compact and predictable during light finishing cuts. The rhombic plate shape and modest rake help to reduce vibration and maintain a steady cutting edge, which translates into fewer interruptions on the shopfloor and more consistent part quality. Explaining the chipbreaker: the PSS groove is engineered for fine finishing, directing chips away from the cutting zone to avoid surface damage and to support uninterrupted, continuous turning cycles. ISO compatibility for straightforward tool set-up The insert follows the ISO coding 110304, size 11 mm and thickness 3.18 mm, with a cylindrical hole and a single-sided countersink (40°–60°) for secure clamping in standard holders. This standardisation means the component integrates into existing ISO tool systems without special adapters, simplifying tool changes and reducing setup times. The substrate is a cemented carbide, providing a stable support for the cermet cutting edge and enabling reliable repeatability in batch production. Practical production benefits and ordering clarity Using an ISO-form insert with a known specification reduces process variability: predictability in chip behaviour and edge performance lowers scrap rates and shortens cycle time for finishing operations. The compact rhombic format is suitable for both external and internal turning, while the hole and countersink ensure consistent seat and repeatable indexing. For procurement and traceability, the manufacturer article number and supplier SKU are available, so replacements or inventory management can be handled without ambiguity. Contact Metav Werkzeuge for application support or to order the Tungaloy VCMT110304-PSS NS9530 insert and discuss suitable holder combinations for specific turning tasks Technical data Article number: 6998599 Manufacturer SKU: TUN6998599 SKU: 6998599-Tungaloy Label: VCMT110304-PSS NS9530 Manufacturer article number: 6998599 Facts Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief (free) angle: 7° Diamond angle: 35° ISO code: 110304 Special features Uncoated cermet grade NS9530 PSS chipbreaker Rhombic plate form With hole: cylindrical hole + single-sided countersink (40°–60°) Model series: ISO turning inserts Application: Turning Substrate: cemented carbide Compatible with ISO holders; system includes holder, shim/clamp and screws FAQ Which materials is this insert optimised for? The NS9530 finishing grade on the VCMT110304-PSS is optimised for machining steel, delivering low cutting forces and high surface quality in continuous finishing cuts. What cutting geometry helps achieve the surface finish? The combination of a 0.4 mm corner radius, 7° relief and the PSS chipbreaker ensures gentle engagement and controlled chip flow, which supports a fine surface finish on turned parts. Will the insert fit standard ISO holders? Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; when those parameters match, the insert will seat correctly in standard ISO holders and index reliably. For which turning tasks is this grade recommended? This insert is intended for finishing operations, particularly continuous cuts and small depths of cut, suitable for both internal and external turning where surface integrity is a priority. How is the insert secured and indexed? The insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping and repeatable indexing within ISO-standard toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 T6215 Wendeplatten - Tungaloy
VCMT 110304 T6215 ISO-Drehwendeschneidplatte für Drehen – Tungaloy Die VCMT110304-PSS T6215 ist eine ISO-genormte Drehwendeschneidplatte für das Drehen von rostfreiem Stahl und eignet sich für stabile bis leicht unterbrochene Schnittbedingungen Hohe Verschleißfestigkeit dank CVD-Beschichtung Optimierter Spanbruch für rostfreie Stähle Rhombische Form 11 mm für vielseitige Anwendungen Mit Loch und Senkung für gesicherte Befestigung Eckenradius 0,4 mm für feine Konturen Hohe Verschleißfestigkeit für anspruchsvolle Einsätze Die VCMT110304-PSS T6215 kombiniert Hartmetall mit einer CVD-beschichtung, was die Standzeit bei der Bearbeitung von rostfreiem Stahl deutlich erhöht. Durch die verschleißfeste Sorte T6215 reduziert sich der Werkzeugverschleiß unter stabilen Schnittbedingungen, sodass Rüstintervalle verlängert und Stillstandzeiten reduziert werden. Diese Eigenschaft macht die Platte besonders geeignet für Fertigungen, in denen konstante Teilqualität und reproduzierbare Ergebnisergebnisse gefragt sind. Präzise Spanformung und Schnittstabilität Der integrierte Spanbrecher PSS ist auf die Spanabfuhr beim Drehen von rostfreiem Stahl ausgelegt und unterstützt eine kontrollierte Spanbildung. In Kombination mit dem Eckenradius 0,4 mm ergibt sich eine verbesserte Oberflächenqualität bei Konturen und Durchmessern. Die Platte ist für Außen- und Innendrehen einsetzbar; die Wahl des Spanbrechers und der Sorte ermöglicht eine Anpassung an Bearbeitungsart und Maschinenstabilität. Kompatibilität und einfache Montage im Produktionsalltag Die rhombische Plattenform mit Loch und zylindrischer Befestigung plus einseitiger Senkung (40°–60°) gewährleistet sichere Klemmsituationen am Halter. Die Plattendicke 3,18 mm und die Normbezeichnung sorgen für einfache Austauschbarkeit in ISO-konformen Haltern. Anwender profitieren von schneller Verfügbarkeit der Ersatzplatten und von standardisierten Systemkomponenten, die Rüstzeiten verkürzen und die Prozesssicherheit erhöhen. Wirtschaftlichkeit durch konstante Leistung und Prozesssicherheit Die Kombination aus stabiler Schneidkante und CVD-Beschichtung bedeutet längere Einsatzzeiten und weniger Werkzeugwechsel. Für Produktionsumgebungen mit hohem Wiederholbedarf führt das zu messbaren Produktivitätsvorteilen. Die Platte eignet sich besonders für Anwender, die bei der Zerspanung von rostfreiem Stahl Wert auf reproduzierbare Oberflächengüten und planbare Standzeiten legen. Setzen Sie auf die verschleißfeste Tungaloy-Sorte T6215 und fordern Sie die VCMT110304-PSS T6215 direkt über Metav Werkzeuge an – per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6877341 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT110304-PSS T6215 Hersteller SKU: TUN6877341 Daten Winkel: 35° Freiwinkel: 7° Plattendicke: 3,18 mm Plattengröße: 11 mm Eckenradius: 0,4 mm Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet Sorte: T6215 Spanbrecher: PSS (Spanbrecher für rostfreie Stähle) Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatzbereich: Drehen Typische Anwendung: Außen- und Innendrehen FAQ Welche Werkstoffe lassen sich mit der VCMT110304-PSS T6215 bearbeiten? Die VCMT110304-PSS T6215 von Tungaloy ist speziell für das Drehen von rostfreiem Stahl konzipiert und bietet durch die CVD-Beschichtung sowie die Sorte T6215 gute Verschleißfestigkeit bei stabilen bis leicht unterbrochenen Schnitten. Welchen Eckenradius hat die Platte und welche Auswirkung hat das? Die Platte besitzt einen Eckenradius von 0,4 mm; dieser erlaubt feine Konturen und trägt zu einer verbesserten Oberflächenqualität bei, insbesondere bei abgesetzten Flächen und kleinen Durchmessern. Wie ist die Platte befestigt und welche Halter sind kompatibel? Die VCMT110304-PSS T6215 verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°) für gesicherte Befestigung; kompatible Halter müssen Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke der ISO-Platte berücksichtigen. Was leistet der Spanbrecher PSS in der Praxis? Der Spanbrecher PSS ist auf eine kontrollierte Spanbildung bei rostfreien Stählen ausgelegt und verbessert dadurch die Spanabfuhr sowie die Stabilität des Schneidprozesses, was sich positiv auf Standzeit und Oberflächengüte auswirkt. Ist die Platte für Innen- und Außenbearbeitung geeignet? Ja, die VCMT110304-PSS T6215 eignet sich für Außen- und Innendrehen; die Wahl des geeigneten Halters und der Schnittdaten richtet sich nach Werkstückgeometrie und Maschinenstabilität. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110304 T6215 Wendeplatten - Tungaloy
Take advantage of durable CVD-coated carbide and ISO compatibility for consistent turning performance; order the insert directly via Metav Werkzeuge or consult their specialists for application advice. VCMT110304-TM T6215 — ISO turning insert, CVD-coated carbide, 0.4 mm radius (Tungaloy) The VCMT110304-TM T6215 is an ISO rhombic indexable insert engineered for stable external and internal turning of stainless steel under steady to slightly interrupted cutting conditions. CVD-coated cemented carbide T6215 0.4 mm nose radius for fine finishes 7° clearance angle for consistent cutting Suitable for stainless steel turning Precision wear resistance that extends tool life The combination of a CVD-coated carbide substrate with the T6215 grade delivers enhanced wear resistance and edge stability during extended turning cycles. The coating forms a hard, thermally resistant layer that reduces flank wear and maintains a sharp cutting edge, which in turn supports consistent component tolerances and surface quality. For manufacturers aiming to reduce downtime and scrap, this indexable plate offers measurable process stability while keeping regrinding intervals low. The rhombic geometry also helps control chip flow and enables reliable engagement in profile and face-turning operations. Designed for straightforward integration into existing tool systems Compatibility with turning holders depends on the insert’s form, 7° clearance, tolerance class, fastening method, size and thickness. The insert’s 11 mm inscribed size and 3.18 mm thickness make it straightforward to fit common ISO external holders or boring bars when the correct seat and screw are used. The central mounting is supported by a cylindrical hole with a one-sided countersink (40°–60°), enabling secure clamping and repeatable positioning. In practice, the system comprises the ISO insert, a matched holder or bar, a support pad or clamp set and replacement screws; this modular approach simplifies inventory and speeds changeovers on the shop floor. Reliable cutting for demanding stainless applications The chipbreaker TM is optimised for ductile materials such as stainless steel, supporting short, fragmented chips and promoting smooth evacuation in both external turning and internal bore work. The modest 0.4 mm nose radius balances surface finish and tool strength, making the insert suitable for finishing passes or light semi-finishing where dimensional control is critical. Because the grade is specified for stable to slightly interrupted conditions, it performs well in production runs where occasional engagement variation occurs. Overall, the insert prioritises efficiency and repeatability, helping to secure consistent part quality and reduced cycle-time variation. For dependable stainless-steel turning with Tungaloy quality, contact Metav Werkzeuge for availability of the VCMT110304-TM T6215 insert and tailored application recommendations from their technical team. Technical data Article number: 6951574 Manufacturer SKU: TUN6951574 SKU: 6951574-Tungaloy Product: VCMT110304-TM T6215 Material: Cemented carbide Coating/grade: CVD, T6215 Facts Radius: 0.4 mm Thickness: 3.18 mm Size (inscribed): 11 mm Clearance angle: 7° Included angle: 35° Special features Rhombic shape With hole: cylindrical + one-sided countersink (40°–60°) Chipbreaker: TM ISO turning insert series For external and internal turning Compatible via form, clearance, tolerance, fastening, size, thickness Stable to slightly interrupted cuts FAQ What materials is this insert best suited for? This VCMT110304-TM T6215 insert is optimised for stainless steel machining; the CVD-coated T6215 grade gives wear resistance for common stainless grades. Can the insert be used for both external and internal turning? Yes, the insert is specified for external and internal turning operations when mounted in an appropriate ISO holder and clamping assembly. How does the chipbreaker TM influence performance? The chipbreaker TM promotes short, controllable chips when machining ductile materials, improving chip evacuation and surface finish during continuous and lightly interrupted cuts. What mounting details are important for compatibility? Compatibility requires matching the insert form, 7° clearance, tolerance class, fastening type, size (11 mm) and thickness (3.18 mm); the insert’s cylindrical hole with countersink ensures secure clamping. Is this insert suitable for interrupted cuts? The T6215 grade and design handle stable to slightly interrupted cutting; for heavy interruptions a more robust grade or different geometry should be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 T9215 Wendeplatten - Tungaloy
High wear resistance and built-in fracture toughness ensure steady productivity in medium steel turning; the combination of CVD-coated carbide and an optimised PSS chipbreaker reduces downtime and tool changes. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. VCMT110304-PSS T9215 — ISO turning indexable insert for turning (Tungaloy) VCMT110304-PSS T9215 is a CVD-coated carbide indexable insert developed for efficient external and internal turning in medium steel applications CVD-coated carbide grade T9215 Optimised for medium steel machining Rhombic 11 mm form, 0.4 mm nose radius Cylindrical hole with 40°–60° countersink Consistent cutting performance for medium steel production The CVD-coated T9215 grade combines high wear resistance with reliable fracture strength, making it particularly suited to continuous and slightly interrupted cuts on medium steel. The PSS chipbreaker is designed to produce manageable chips and support stable cutting forces, which leads to longer tool life and fewer interruptions on the production floor. Selecting this geometry helps maintain consistent component tolerances and reduces the frequency of insert changes, supporting smoother process control. Clear mounting and geometric compatibility for fixture planning Compatibility with tool holders depends on form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic VCMT form and the specified 7° clearance require a matching seat and clamping arrangement to ensure correct seating and repeatability. The insert thickness of 3.18 mm and the 11 mm nominal size are key dimensions when selecting a suitable external holder or boring bar. Understanding these parameters avoids misfits and ensures predictable cutting behaviour. Practical chip control and productivity advantages The PSS chipbreaker is tuned for medium steels to generate short, curled chips under typical turning feeds, which simplifies evacuation and reduces the risk of entanglement. The 0.4 mm nose radius balances edge strength and surface finish: it resists chipping while still allowing good profile definition on turned parts. When applied at stable cutting parameters, this geometry supports higher material removal rates and contributes to an improved cost-per-part ratio in serial turning operations. Why the Tungaloy grade is a good production choice Tungaloy’s engineering focus on process reliability and tool life is reflected in this grade: a CVD-coated carbide substrate with a robust coating architecture that withstands abrasive wear and thermal load during medium-steel machining. For shops seeking predictable repeatability, the combination of the VCMT110304-PSS T9215 geometry and the grade’s fracture-tough character yields steady performance across batch runs, lowering scrap risk and improving throughput. Contact Metav Werkzeuge for tailored application advice or to reserve stock of this Tungaloy insert; technical consultations are available by email or phone at Metav Werkzeuge Technical data Manufacturer article number: 6773996 SKU: 6773996-Tungaloy Model series: ISO turning indexable inserts Article name: VCMT110304-PSS T9215 Core technical data Nose radius: 0.4 mm Insert size: 11 mm Thickness: 3.18 mm Clearance angle: 7° Approach/lead angle: 35° ISO designation: 110304 Special features Material: carbide Coating: CVD-coated Chipbreaker: PSS Hole: cylindrical with one-sided countersink 40°–60° Application: turning (medium steel) Suitable for continuous to slightly interrupted cuts FAQ What materials is this insert designed to machine? This insert, VCMT110304-PSS T9215 from Tungaloy, is intended primarily for medium steel machining and delivers a balanced combination of wear resistance and toughness for that material group. How does the 0.4 mm nose radius affect part finish and edge life? A 0.4 mm nose radius increases edge strength compared with a very small radius and supports a good surface finish when cutting parameters are set appropriately for the VCMT geometry and the T9215 grade. What chip control can be expected with the PSS chipbreaker? The PSS chipbreaker is engineered to produce short, controllable chips in medium steel turning, facilitating safe chip evacuation and reducing interruptions on the machine. Can this insert be used in interrupted cuts? Yes; the CVD-coated T9215 grade combines toughness with wear resistance and is suitable for continuous to lightly interrupted cuts, offering reliable performance in such conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide T9215 for high wear resistance and the TM chipbreaker for consistent chip control; combined with ISO compatibility by form and dimensions, this insert delivers reliable productivity for medium steel turning — order via Metav Werkzeuge or consult our specialists for application advice. VCMT110304-TM T9215 — VCMT 110304 T9215 ISO turning insert, CVD-coated carbide by Tungaloy The VCMT110304-TM T9215 is an ISO‑standard rhombic turning insert designed for external and internal turning of medium steels, optimised for continuous to lightly interrupted cuts. CVD-coated carbide T9215 for medium steel TM chipbreaker for stable chip control Rhombic 35° geometry for versatile turning 11 mm plate size with 0.4 mm corner radius Longer tool life through a robust CVD coating The combination of CVD‑coated surface treatment and a wear‑resistant carbide substrate provides extended component life and fewer tool changes. The T9215 grade balances hardness and fracture toughness, making it particularly suited to medium‑grade steels where a mix of abrasion resistance and edge stability is required. Reduced wear translates into longer uninterrupted production and lower per‑part tooling cost. Consistent chip control and improved surface quality The TM chipbreaker geometry secures reliable chip formation across typical turning conditions, which reduces the risk of entanglement and minimises rework. Stable chips aid coolant flow and help maintain an even cutting edge temperature, contributing to a more consistent surface finish. For operations emphasising repeatability and part quality, the predictable chip behaviour directly supports process stability. Fast integration with ISO holders and simple setup As an ISO‑standard insert, compatibility with turning holders is determined by form, relief angle and size; the rhombic shape and 35° approach angle make the insert adaptable for a wide range of external and internal operations. The insert features a 7° relief angle and a central mounting hole with a cylindrical bore plus a one‑sided countersink (40°–60°), allowing secure clamping and straightforward positioning. This standardisation reduces setup time and simplifies inventory management. Application guidance and selection tips For medium steels and mixed production runs, the grade and TM chipbreaker combination offers a practical compromise between productivity and tool life. The 0.4 mm corner radius supports light finishing passes with tight tolerance control, while the 3.18 mm plate thickness delivers sufficient rigidity for general turning tasks. Select the matching holder and clamping set that correspond to the insert's form and tolerance class to ensure repeatable results. Contact Metav Werkzeuge today to discuss suitability of the Tungaloy VCMT110304-TM T9215 inserts for specific turning jobs, request application recommendations, or place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951569 Manufacturer SKU: TUN6951569 SKU: 6951569-Tungaloy Designation: VCMT110304-TM T9215 Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Numbers / Core technical data Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 mm Approach angle: 35° Relief angle: 7° Designs / Special features Rhombic plate geometry With central hole Cylindrical hole + one‑sided countersink (40°–60°) TM chipbreaker CVD‑coated carbide, grade T9215 Intended for external and internal turning Suitable for continuous to light interrupted cuts System components: ISO insert, matching holder, shim/clamping set and spare screws FAQ Which materials is this insert best suited for? The VCMT110304-TM T9215 insert is optimised for medium steels, where the T9215 grade provides a balance of wear resistance and toughness for continuous to lightly interrupted turning. Can the insert be used for finishing passes? Yes, the 0.4 mm corner radius and stable edge geometry make the insert suitable for light finishing, delivering improved surface quality when used with appropriate feeds and speeds. How does the TM chipbreaker affect performance? The TM chipbreaker promotes controlled chip formation, reducing chip entanglement and improving process reliability, which supports consistent surface finish and safer material removal. What should be considered when matching holders? Compatibility depends on insert form, relief angle and tolerance class; select an ISO‑compatible holder that matches the rhombic VCMT form, 7° relief and the specified plate thickness to ensure secure clamping. Is this an original Tungaloy product? The item is offered as an original new Tungaloy turning insert and carries the manufacturer designation VCMT110304-TM T9215 and article number 6951569. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 T9215 Wendeplatten - Tungaloy
Take advantage of high wear resistance and secure clamping for consistent productivity in medium steel turning; the combination of CVD-coated carbide and a TSF chipbreaker delivers stable chip control and long tool life. Order the VCMT 110304 T9215 inserts through Metav Werkzeuge or request tailored cutting-parameter advice from our technical team. VCMT 110304 T9215 ISO turning insert — CVD-coated carbide, 0.4 mm radius, for turning VCMT 110304 T9215 is an ISO-format turning insert designed for medium steel machining, offering a TSF chipbreaker and geometry suited to continuous and light interrupted cuts ISO format VCMT 110304 T9215 CVD-coated carbide substrate 0.4 mm corner radius for precise cuts Cylindrical hole with 40°–60° countersink Consistent productivity for medium steel turning The VCMT110304-TSF T9215 is formulated as a first choice for medium steel work, combining a CVD-coated surface with a robust carbide substrate to extend edge life under productive conditions. The coating improves resistance to abrasive wear while the substrate maintains fracture resistance, which translates into fewer indexings and less downtime. This geometry and grade are particularly effective for sustained high-volume turning where a balance of tool life and secure cutting performance reduces overall machining costs. Secure mounting and ISO interchangeability for predictable results Built to the ISO specification, the insert’s rhombic shape and the specified hole style ensure defined seating in compatible holders. The cylindrical hole with a single-side countersink (40°–60°) provides reliable clamping and repeatable positioning, reducing vibration and enabling consistent results across tool changes. The insert’s 35° lead angle and 7° relief work together to moderate cutting forces and promote smooth chip flow, supporting stable surface finish and predictable tool behaviour in both external and internal turning operations. Optimised chip control and reliable edge behaviour The integrated TSF chipbreaker is tuned for medium steel to produce short, controllable chips in continuous to slightly interrupted cuts. Controlled chip formation improves process security and reduces the risk of component damage or tool interference. With a 0.4 mm corner radius, the insert supports accurate dimensional control and an improved edge robustness for finishing passes. The result is a pragmatic compromise between surface quality and productivity, yielding reproducible machining performance over extended production runs. For reliable, application-specific recommendations on the Tungaloy VCMT 110304 T9215 and to discuss batch availability or cutting data, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and fast service. Technical Data Article number: 6951533 Manufacturer's SKU: TUN6951533 SKU: 6951533-Tungaloy Model series: ISO turning inserts ISO designation: VCMT110304-TSF Facts Radius: 0.4 mm Thickness: 3.18 mm Size: 11 mm Relief angle: 7° Lead angle: 35° Hole: with hole Special features Material: Carbide Coating: CVD-coated (T9215) Chipbreaker: TSF Application: Turning; external and internal turning Suitable for: medium steel machining FAQ What materials is this insert best suited for? The VCMT110304-TSF T9215 is optimised for medium steel machining; the CVD-coated carbide grade combines wear resistance with toughness for productive turning. Is this insert compatible with standard ISO holders? Yes. The insert follows ISO dimensions and the cylindrical hole with countersink is intended for secure clamping in compatible ISO-format holders. How does the TSF chipbreaker affect machining? The TSF chipbreaker on the insert produces short, controllable chips in continuous to light interrupted cuts, improving process security and surface consistency. What benefits does the 0.4 mm corner radius provide? A 0.4 mm corner radius increases edge strength and helps maintain dimensional accuracy during finishing passes while supporting a good surface finish. Can this grade handle interrupted cuts? The T9215 grade is suitable for continuous and slightly interrupted cuts; for heavy interruptions, more robust strategies or specific geometries should be considered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 for extended tool life, the PS chipbreaker for reliable chip control, and the secure rhombic geometry for stable turning cycles; order the insert via Metav Werkzeuge or consult our specialists for application support. VCMT110304-PS T9215 — VCMT 110304 T9215 Rhombic Turning Insert for Turning · Tungaloy A VCMT110304-PS T9215 indexable carbide insert engineered for ISO-compatible turning operations, optimised for productive machining of medium steels. CVD-coated carbide grade T9215 Optimised PS chipbreaker Rhombic ISO insert, 11 mm size 0.4 mm corner radius, 7° relief Consistent durability for productive turning The insert is manufactured in CVD-coated carbide and specified as grade T9215, combining high wear resistance with enhanced fracture toughness for continuous to mildly interrupted cuts. This material and coating combination reduces flank and crater wear under standard turning parameters, resulting in longer tool life and fewer indexings. The outcome is improved process stability and a reduced need for machine downtime, which supports higher overall productivity on the shop floor. Secure seating and precise geometry for repeatable results A rhombic plate form with a 0.4 mm corner radius and 7° relief delivers a balance between finishing capability and edge strength. The insert’s 3.18 mm thickness and 11 mm size match common ISO holder interfaces, while the cylindrical hole with single-side countersink (40°–60°) ensures reliable clamping and repeatable seating. Together these features give consistent cutting geometry, minimise vibration, and support predictable surface finish and dimensional control during external and internal turning. Optimised chip control and system compatibility The PS chipbreaker is tuned for medium-steel applications and promotes short, controllable chips under normal feeds and speeds. Selecting the correct chipbreaker and grade according to workpiece material, machining type and assembly stability will deliver the best results. The insert is part of an ISO system: ISO insert, matching external holder or boring bar, shim/clamp and replacement screws. Compatibility with the toolholder is determined by form, relief angle, tolerance class, fastening, size and thickness, allowing seamless integration into existing toolsets. Choose the Tungaloy VCMT110304-PS T9215 for efficient medium-steel turning and contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6772492 Manufacturer SKU: TUN6772492 SKU: 6772492-Tungaloy Model series: ISO turning indexable inserts Name: VCMT110304-PS T9215 Facts ISO code: 110304 Corner radius: 0.4 mm Relief angle: 7° Plate thickness: 3.18 mm Insert size: 11 mm Approach angle: 35° Special features CVD-coated carbide (T9215) PS chipbreaker Rhombic plate form With cylindrical hole and single-side countersink (40°–60°) Suitable for external and internal turning Intended for medium steel System build: ISO insert, matching holder/boring bar, shim/clamp and replacement screws FAQ Which materials is this insert best suited to machine? The Tungaloy VCMT110304-PS T9215 insert is optimised for medium steels and performs well in continuous to slightly interrupted turning operations. What type of holders are compatible with this insert? Compatibility requires ISO-compatible holders that match the insert’s form, relief angle, tolerance class, fastening method, size and thickness; use a matching external holder or boring bar with appropriate shim and clamp. What does the PS chipbreaker provide in practice? The PS chipbreaker on this insert improves chip control for medium-steel turning, producing short, manageable chips and supporting stable cutting conditions. How should the insert be mounted and secured? Mount the insert on a correctly sized ISO holder, ensure the cylindrical hole and countersink align with the clamping screw, and verify seating and torque according to the holder manufacturer’s guidance; the SKU for reference is 6772492-Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 T9215 Wendeplatten - Tungaloy
Combining the CVD-coated carbide T9215 with the ISO rhombic VCMT geometry and a 0.4 mm nose radius delivers consistent surface finish and high productivity in mid-range steel turning; order the insert through Metav Werkzeuge or consult the specialists for compatibility advice. VCMT110304-PSF T9215 ISO rhombic turning insert for turning (CVD-coated carbide) by Tungaloy A VCMT110304-PSF T9215 rhombic ISO turning insert designed for mid-range steel turning, offering robust wear resistance and predictable chip control in continuous to lightly interrupted cuts. CVD-coated carbide grade T9215 for wear resistance 0.4 mm nose radius for consistent surface finish 7° clearance and 35° lead angle for versatile turning Rhombic ISO VCMT shape with central hole and countersink Increased productivity with wear-resistant CVD coating The combination of CVD-coated carbide and the T9215 grade provides a balance of high wear resistance and fracture toughness that suits medium-duty steel machining. The chemical vapour deposition layer increases abrasive wear protection, which translates into longer intervals between indexings and fewer production interruptions. The insert geometry, based on the ISO VCMT110304 standard, and the moderate nose radius support stable cutting conditions that favour higher feed rates without compromising surface quality. Predictable chip control and surface quality The PSF chipbreaker is optimised for steel turning, producing controlled chips in continuous and lightly interrupted cuts to reduce rework and machine downtime. The 0.4 mm nose radius helps achieve consistent finishes while allowing small to moderate stepovers for efficient stock removal. Together with the 7° clearance and 35° lead angle, the system delivers a predictable cutting force vector and improved tool life, which supports repeatable part quality across production batches. Practical mounting, compatibility and selection guidance Compatibility with toolholders depends on form, clearance angle, tolerance class, fastening method, size and thickness; this insert is rhombic, 11 mm across, with a 3.18 mm plate thickness and a central hole featuring a cylindrical bore plus a single‑side countersink (40°–60°). The recommended system includes a matched external holder or boring bar, a supporting shim/clamp set and spare screws to ensure secure clamping and repeatable positioning. Select the PSF chipbreaker and the T9215 grade when machining mid-range steels under predominantly continuous conditions for best results. Request the Tungaloy VCMT110304-PSF T9215 from Metav Werkzeuge for fast dispatch and tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6773966 SKU: 6773966-Tungaloy Manufacturer SKU: TUN6773966 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Designation: VCMT110304-PSF T9215 Facts Nose radius: 0.4 mm Plate thickness: 3.18 mm Insert size: 11 Clearance angle: 7° Lead/approach angle: 35° Hole style: cylindrical hole + single-side countersink (40°–60°) Special features CVD-coated carbide grade T9215 PSF chipbreaker optimised for steel Rhombic ISO VCMT geometry With central hole (mit Loch) for positive clamping Suitable for continuous to lightly interrupted turning of steel System comprises ISO insert, matching external holder or boring bar, shim/clamp set and spare screws FAQ What materials is this insert best suited for? This insert is optimised for mid-range steel machining; the T9215 grade and PSF chipbreaker give good wear resistance and stable chip control for continuous to lightly interrupted cuts. Which holder features are required for correct compatibility? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the insert requires a holder matching ISO VCMT110304 dimensions and a compatible clamping system. How does the PSF chipbreaker affect machining? The PSF chipbreaker produces shorter, controlled chips in steel turning, improving safety and reducing the need for secondary chip control measures while maintaining surface quality. Can this insert handle interrupted cuts? The T9215 grade combines wear resistance with fracture toughness suitable for continuous and lightly interrupted cuts; heavily interrupted machining may require a different geometry or a tougher grade. What are the critical dimensions to check before ordering? Confirm the 0.4 mm nose radius, plate thickness 3.18 mm, insert size 11, clearance 7° and the central hole with countersink specification to ensure correct fit in the selected holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com