VCMT 110304 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD‑coated T9225 grade that combines wear resistance with increased toughness for interrupted cuts; the rhombic ISO form and precise 0.4 mm corner radius deliver consistent edge life and repeatable results. Order the insert directly via Metav Werkzeuge or consult the technical team for application matching. VCMT 110304 T9225 — Turning insert, ISO rhombic form, CVD‑coated carbide (Tungaloy) The VCMT110304-PSS T9225 is an ISO‑standard rhombic turning insert engineered for medium to heavy steel turning, offering a PSS chipbreaker and a robust CVD‑coated carbide grade for stable machining under variable cutting conditions. CVD-coated carbide for enhanced wear resistance Robust universal grade T9225 for medium–heavy steel PSS chipbreaker for stable chip control Rhombic VCMT form with 0.4 mm corner radius Increased productivity through wear-resistant grade and chip control The combination of a CVD‑coated carbide substrate and the T9225 grade ensures a balance between hardness and toughness, suitable for demanding steel operations. The applied coating reduces flank and crater wear, extending tool life and lowering indexation frequency. With the integrated PSS chipbreaker, chip formation is controlled even during light interruptions, which reduces downtime for chip clearing and helps maintain a consistent surface finish. These characteristics translate into higher throughput and fewer unplanned tool changes on production lines. Secure fit and ISO compatibility for predictable set‑ups Designed to meet ISO specifications, the insert’s rhombic VCMT form and the central hole with a cylindrical bore and single‑side countersink (40°–60°) ensure reliable seating and repeatable positioning in standard holders. The insert thickness of 3.18 mm, an inscribed circle of 11 mm and the nominal 7° clearance angle make it compatible with common external and internal turning assemblies; this compatibility reduces setup time and minimises the risk of incorrect assembly. Clear geometric parameters support process planning and simplify holder selection for manufacturing engineers. Application guidance for efficient steel turning The grade is optimised for medium to heavy steel machining, including scenarios with slightly interrupted cuts where additional toughness is required. A 0.4 mm corner radius provides a compromise between edge strength and surface quality, allowing stable engagement in roughing and semi‑finishing passes. Selecting this insert with a matching holder and appropriate cutting data will help achieve good chip control, consistent tool life and improved surface integrity, particularly when machining alloyed and carbon steels under variable cutting conditions. Contact Metav Werkzeuge to specify the VCMT110304‑PSS T9225 for the next production run; technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to assist with holder compatibility and cutting data selection Technical data Article number: 6781326 Manufacturer SKU: TUN6781326 SKU: 6781326-Tungaloy ISO designation: VCMT110304-PSS Brand: Tungaloy Facts Corner radius: 0.4 mm Clearance angle: 7° Thickness: 3.18 mm Inscribed circle / size: 11 mm Approach/lead angle: 35° Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features CVD-coated carbide grade T9225 PSS chipbreaker for reliable chip control ISO‑standard rhombic VCMT form Suited to medium–heavy steel turning and interrupted cuts Compatible with standard external and internal turning holders FAQ What materials is this insert best suited for? The VCMT110304-PSS T9225 is optimised for medium to heavy steel machining and performs well under slightly interrupted cutting conditions due to its tougher CVD‑coated carbide grade. How does the PSS chipbreaker affect machining? The PSS chipbreaker on the insert promotes controlled chip formation and evacuation, reducing the risk of entanglement and helping to maintain consistent surface quality during turning operations. Which geometry details ensure secure clamping? The rhombic VCMT form combined with the central cylindrical hole and single‑side countersink (40°–60°) provides repeatable seating and stable fixation in ISO‑compatible holders. Is this insert suitable for finishing operations? With a 0.4 mm corner radius and the CVD coating, the insert can be used for semi‑finishing and some finishing passes, though finer radii may be preferred for high‑precision surface finishes. What should be considered for interrupted cuts? The T9225 grade is formulated to deliver additional toughness for interrupted cuts; pairing the insert with appropriate feed rates and a rigid setup will improve edge life and process security. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, precise 0.4 mm corner radius and proven PS chip control to maintain stable, productive turning operations; order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific advice. VCMT 110304 T9225 turning insert by Tungaloy VCMT110304-PS T9225 is an ISO rhombic turning insert for external and internal turning, designed for medium to heavy steel machining CVD-coated carbide grade T9225 Robust universal grade for medium/heavy steel PS chipbreaker for reliable chip control 0.4 mm corner radius, 35° rhombic form Consistent productivity for medium to heavy steel turning The CVD-coated carbide composition of this insert delivers a balanced combination of wear resistance and toughness. The T9225 grade is formulated as a robust universal solution for variable engagement conditions and slightly interrupted cuts, which helps to reduce downtime and tool changes in mixed-batch production. With a 0.4 mm corner radius, the insert provides a compromise between edge strength and dimensional accuracy, promoting longer life on roughing passes while still enabling acceptable surface finishes on semi-finishing operations. The PS chipbreaker contributes to controlled chip formation, lowering the risk of entanglement and improving swarf evacuation in both coarse and moderate feeds. Secure seating and flexible compatibility for reliable setups The rhombic plate form and 35° cutting geometry ensure versatile access to external and internal profiles with reproducible cutting conditions. Compatibility with a holder depends on form, clearance angle, tolerance class, fastening, size and thickness; therefore the plate’s 3.18 mm thickness and the presence of a cylindrical hole with a one-sided countersink (40°–60°) are designed for secure clamping and simple alignment in standard ISO toolholders. Correct matching of insert and holder enhances stability, reduces vibration and preserves the cutting edge, which together lower the risk of rework and support consistent component tolerances across production runs. Practical selection and in-process advantages When selecting an insert for turning operations, consider the interaction of chipbreaker geometry and material: the PS chipbreaker is particularly suitable where variable cut depths or intermittent engagement occur, offering predictable chips and reduced edge loading. The ISO designation and standardised dimensions simplify stocking and replenishment. For applications straddling roughing and semi-finishing, this insert’s balanced properties ease process planning: stronger edges resist chipping during heavy cuts while the coating supports abrasive wear resistance. For machining guidance, confirm the matching holder and stability of the setup; if necessary, request feed and speed recommendations based on the particular steel grade and component geometry. Contact Metav Werkzeuge today for tailored advice on using Tungaloy turning inserts and to secure your supply — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6781159 SKU: 6781159-Tungaloy Manufacturer SKU: TUN6781159 Brand: Tungaloy Name: VCMT110304-PS T9225 Facts Corner radius: 0.4 mm Clearance angle: 7° Cutting edge angle: 35° Plate thickness: 3.18 mm Plate size: 11 ISO designation: 110304 Special features CVD-coated carbide, grade T9225 PS chipbreaker Rhombic plate form With cylindrical hole and one-sided countersink (40°–60°) Suitable for external and internal turning FAQ What materials is this insert intended for? This insert, the VCMT110304-PS T9225 from Tungaloy, is optimised for medium to heavy steel machining and performs well where toughness and abrasion resistance are required. Can the insert handle interrupted cuts? Yes, the T9225 grade and the PS chipbreaker are chosen for increased toughness, making the insert suitable for slightly interrupted cuts and variable engagement. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; the VCMT110304-PS T9225 is designed for standard ISO-compatible rhombic holders with matching parameters. How does the 0.4 mm radius affect performance? A 0.4 mm corner radius provides enhanced edge strength for roughing and good versatility for semi-finishing, balancing tool life and achievable surface quality. Is this insert suitable for both external and internal turning? Yes, the plate form and geometry are suited for both external turning and internal turning, allowing flexible use across common turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110304 T9225 Wendeplatten - Tungaloy
VCMT 110304 T9225 – Drehwendeschneidplatte von Tungaloy für Drehen VCMT 110304 T9225 ist eine ISO-genormte rhombische Drehwendeschneidplatte für Außen‑ und Innendrehen, ausgelegt für mittlere bis schwere Stahlbearbeitung. VCMT 110304 T9225 von Tungaloy CVD‑beschichtetes Hartmetall für lange Standzeit Universalsorte T9225 bei wechselnden Schnittbedingungen Rhombische Platte 11 mm, Eckradius 0,4 mm Zylindrisches Loch mit Senkung 40°–60° für sichere Befestigung Höhere Produktivität durch optimierte Schneidstoffkombination Die Kombination aus CVD‑Beschichtung und robustem Hartmetall macht diese Wendeschneidplatte besonders widerstandsfähig gegen Verschleiß bei wechselnden Eingriffsbedingungen. Für die Fertigung bedeutet das weniger Werkzeugwechsel und höhere Maschinenauslastung. Anwender profitieren von stabiler Spanbildung und konstanter Performance bei Außen‑ und Innendreharbeiten. Sichere Montage und präzise Aufnahme für reproduzierbare Ergebnisse Die Platte verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°), wodurch die Fixierung auf ISO‑konformen Haltern zuverlässig erfolgt. Der definierte Freiwinkel 7° und der Eckenradius 0,4 mm sorgen für vorhersehbare Schnittkräfte und erleichtern die Prozessauslegung beim Planen und Schlichten. Vielseitigkeit und Materialabdeckung für die Praxis Die Sorte T9225 ist als robuste Universalsorte spezifiziert und eignet sich besonders für Stahlbearbeitung mit leicht unterbrochenen Schnitten. Konstrukteure und Fertigungsplaner können mit dieser Sorte unterschiedliche Werkstoffe und Einsatzfälle abdecken, ohne spezialisierte Platten für jede kleine Varianten einlagern zu müssen. Technische Zuverlässigkeit und einfache Auswahl Das ISO‑Normformat vereinfacht die Auswahl kompatibler Halter: Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke müssen zusammenpassen. Für Anwender mit wechselnden Schnittbedingungen bietet diese Platte eine wirtschaftliche Lösung, da sie Standzeit und Zerspanleistung ausbalanciert. Kurze Erklärung wichtiger Begriffe CVD (chemische Gasphasenabscheidung) bezeichnet eine Schichttechnologie, die harte, verschleißfeste Schichten erzeugt. Der Spanformer TSF ist ein geometrisch definierter Spanbrecher, der bei mittleren Schnittbedingungen stabile Spanformung ermöglicht und so Maschinenausfallzeiten reduziert. Empfehlung: Die VCMT 110304 T9225 von Tungaloy bietet eine wirtschaftliche Kombination aus Standzeit und Zerspanleistung – für Beratung und Verfügbarkeit wenden Sie sich an Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktemerkmale Artikelnummer: 6951534 Marke: Tungaloy Modellserie: ISO‑Drehwendeschneidplatten Bezeichnung: VCMT110304-TSF T9225 SKU Hersteller: TUN6951534 SKU: 6951534-Tungaloy Daten Eckenradius: 0,4 mm Winkel: 35° Freiwinkel: 7° Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Material: Hartmetall Schneidstofftyp: CVD‑beschichtet (chemische Gasphasenabscheidung) Sorte: T9225 Spanformer: TSF (für mittlere bis schwerere Schnitte, stabile Spanformung) Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) FAQ Für welche Anwendungen eignet sich die Platte am besten? Die VCMT 110304 T9225 von Tungaloy eignet sich vor allem für Außen‑ und Innendrehen von Stahlbauteilen, insbesondere bei wechselnden Eingriffsbedingungen und leicht unterbrochenen Schnitten. Welche Vorteile bietet die CVD‑Beschichtung? Die CVD‑Beschichtung auf der VCMT110304-TSF sorgt für hohe Verschleißfestigkeit und verlängert die Standzeit bei abrasiven Bedingungen, ohne die Zähigkeit der Hartmetall‑Trägerlegierung zu stark zu beeinträchtigen. Wie wähle ich den passenden Halter aus? Die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Nutzen Sie für die VCMT110304-TSF die ISO‑Normangaben, um einen passenden Außenhalter zu prüfen. Was bedeutet der Spanformer TSF konkret für die Bearbeitung? Der Spanformer TSF auf der VCMT‑Platte ist für stabile Spanbildung bei mittleren Schnittbedingungen ausgelegt und reduziert so das Risiko von Spanverwicklungen und Maschinenstillstand. Ist die Platte für unterbrochene Schnitte geeignet? Ja, die Sorte T9225 wurde für höhere Zähigkeit ausgelegt und funktioniert zuverlässig bei leicht unterbrochenen Schnitten in Stahl. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110304 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide T9225 and the TM chipbreaker for robust, repeatable performance in medium to heavy steel turning; ensure holder compatibility by matching ISO form, relief angle and size. Order the VCMT110304‑TM T9225 directly via Metav Werkzeuge or consult the technical team for process optimisation. VCMT 110304 T9225 turning insert (ISO) — Tungaloy A VCMT110304‑TM T9225 is an ISO‑standard turning insert designed for external and internal turning, offering toughness for interrupted cuts and stable performance in medium to heavy steel machining. CVD‑coated carbide grade T9225 TM chipbreaker for medium to heavy cutting Rhombic VCMT 11 mm format with 0.4 mm nose Compatible with ISO turning toolholders Proven cutting grade for challenging steel operations The T9225 grade is a CVD‑coated carbide developed as a robust universal option for the mid to heavy range of steel machining. Its composition provides a balance of hardness and toughness, which improves resistance to flank wear while maintaining edge integrity under variable engagement conditions. With the TM chipbreaker, the insert delivers controlled chip formation during interrupted cuts and varying depths of cut, reducing the risk of workpiece marks and tool edge damage. This combination supports longer tool life and more consistent component tolerance achievement. Geometry that delivers reliable fit-up and surface quality The insert’s rhombic VCMT 11 mm format with a 0.4 mm nose radius and 3.18 mm thickness gives a stable cutting geometry that suits a wide range of turning tasks. The 7° relief angle and the 35° insert angle determine the cutting direction and clearance; these dimensions must match the toolholder by form, relief angle, tolerance class, fastening, size and thickness to ensure correct seating and repeatable reference. The central hole design — a cylindrical hole with a single‑side countersink (40°–60°) — enables secure clamping and straightforward indexation, which supports fast tool changes and minimal set‑up variation. Practical guidance for process reliability and chip control In practice, the insert excels when paired with robust external holders or boring bars designed for ISO inserts. The TM chipbreaker encourages short, curled chips in steel, easing evacuation and reducing spindle load peaks. The CVD surface layer enhances wear resistance at elevated temperatures, making the insert suitable for higher cutting speeds where thermal stability matters. For component finish, the 0.4 mm nose radius offers a balance between fine surface quality and tool strength; choose a larger radius for smoother finishes or a smaller radius when tighter corner definition is required. Process matching and grade selection benefit from technical consultation to optimise cutting parameters and holder choice. For advice on integrating the Tungaloy VCMT110304‑TM T9225 insert into production or to place an order, contact Metav Werkzeuge for application support and fast delivery — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6951571 Manufacturer SKU: TUN6951571 SKU: 6951571-Tungaloy Manufacturer article number: 6951571 Model series: ISO turning inserts Dimensions & core data Size: 11 mm Thickness: 3.18 mm Nose radius: 0.4 mm Relief angle: 7° Insert angle: 35° Materials & features Material: carbide Coating: CVD Grade: T9225 Chipbreaker: TM Shape: rhombic Hole: with hole; cylindrical hole + single‑side countersink (40°–60°) Application: turning; external and internal turning FAQ What applications is this insert designed for? The VCMT110304‑TM T9225 insert is intended for external and internal turning, particularly in medium to heavy steel machining and where interrupted cuts demand greater toughness. How can compatibility with a toolholder be verified? Compatibility depends on the insert form, relief angle, tolerance class, fastening method, size and thickness; checking these parameters against the holder specification ensures correct seating and repeatable performance. What are the key geometry specifications that affect finish and strength? Key values are the 11 mm size, 3.18 mm thickness, 0.4 mm nose radius and 7° relief; these determine rigidity, surface finish capability and edge strength for typical turning tasks. Which cutting grade and coating does the insert use? This insert uses the T9225 cutting grade with a CVD coating on a carbide substrate, combining thermal wear resistance with sufficient toughness for robust steel turning. How does the TM chipbreaker support machining stability? The TM chipbreaker promotes consistent chip formation and evacuation in steel turning, reducing chip‑related interference and contributing to stable cutting forces and improved process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 110308 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated carbide grade AH6225 and a sharp, stable cutting edge for consistent performance in rostfreier Stahl turning; the ISO VCMT geometry ensures straightforward holder compatibility. Order directly via Metav Werkzeuge or consult our application specialists for tailored guidance. VCMT 110308 AH6225 — ISO turning insert VCMT110308‑PSS by Tungaloy VCMT110308-PSS AH6225 is an ISO‑standard rhombic turning insert designed for reliable external and internal turning of rostfreier Stahl with a balanced edge between sharpness and stability PVD‑coated carbide grade AH6225 Optimised for rostfreier Stahl turning ISO rhombic VCMT110308 geometry 0.8 mm corner radius, 7° clearance angle Consistent cutting performance for rostfreier Stahl The AH6225 grade is a PVD‑coated carbide developed for versatile performance in rostfreier Stahl. The combination of a sharp yet stable cutting edge reduces built‑up edge and maintains process stability under varying cutting conditions. This results in more consistent component tolerances and improved tool life compared with uncoated alternatives, particularly during medium‑duty machining operations. ISO geometry that simplifies holder selection The insert follows ISO form and sizing rules, which means ISO‑compliant holders and clamping systems can be selected with confidence. Key geometric parameters — rhombic shape, 35° wedge angle and a 7° clearance angle — determine fit and cutting orientation; compatibility is governed by form, relief angle, tolerance class, fixing method, size and thickness. This standardisation reduces setup time and streamlines tool inventory for production environments. Controlled chip formation and machining stability The PSS chipbreaker is tuned for manageable chip control during both external and internal turning, helping to avoid entanglement and improving surface finish. A 0.8 mm corner radius balances edge strength and finish quality, making the insert suitable for many finishing and light‑to‑medium roughing passes. Where vibration or interrupted cuts are expected, selecting the appropriate holder and stable clamping is recommended to preserve edge life. Practical advantages for workshop productivity A PVD coating on a sintered carbide substrate brings improved wear resistance and thermal stability, which supports higher cutting speeds and longer uninterrupted runtimes. By using an ISO‑standard insert such as this, process repeatability is enhanced and tool changeovers become more predictable. For specific parts or unusual rostfreier Stahl grades, match the chipbreaker and grade to the workpiece and operational stability to achieve optimum results. If additional process data or cutting parameters are required, technical consultation is available. Discuss the suitability of the Tungaloy VCMT110308‑PSS AH6225 with Metav Werkzeuge for your turning applications — contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert advice and availability Technical data Article number: 6831911 SKU: 6831911-Tungaloy Manufacturer SKU: TUN6831911 Label: VCMT110308-PSS AH6225 Facts Shape: rhombic (VCMT) Size: 11 Thickness: 3.18 mm Corner radius: 0.8 mm Wedge/insert angle: 35° Clearance (relief) angle: 7° Special features Material: Hartmetall Coating/grade: AH6225 (PVD‑coated carbide) Chipbreaker: PSS Hole: cylindrical hole with single‑side countersink (40°–60°) Typical application: Turning (external and internal) System components: insert, matching outer holder or boring bar, shim/clamp set and replacement screws FAQ Which materials is this insert best suited for? The VCMT110308‑PSS AH6225 is formulated primarily for rostfreier Stahl; the PVD‑coated carbide offers a balance of edge sharpness and wear resistance for reliable machining of such materials. How does the PSS chipbreaker influence operation? The PSS chipbreaker controls chip formation to reduce entanglement and ease evacuation, improving surface finish and reducing the risk of workpiece damage during turning with the Tungaloy insert. What determines holder compatibility for this insert? Holder compatibility depends on the insert form, relief/clearance angle, tolerance class, fixing method, overall size and thickness; the ISO VCMT geometry of this insert simplifies selection of appropriate holders. When should the 0.8 mm corner radius be selected? A 0.8 mm corner radius provides a compromise between edge strength and surface finish, suitable for finishing and light to medium roughing where dimensional accuracy and edge stability are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated carbide grade AH6225, a dedicated TSF chipbreaker and ISO‑standard form for reliable stainless‑steel turning — optimised for mid‑range machining and variable conditions. Order the inserts directly via Metav Werkzeuge or consult our experts for application‑specific setup. VCMT110308 AH6225 — ISO indexable turning insert for turning, Tungaloy The VCMT110308-TSF AH6225 is an ISO‑standard indexable insert designed for external and internal turning, offering a sharp yet stable cutting edge for machining stainless steels in medium cutting conditions. PVD‑coated carbide AH6225 Optimised for stainless‑steel turning Sharp yet stable cutting edge ISO VCMT form with TSF chipbreaker Consistent performance when machining stainless steels The PVD‑coated carbide grade AH6225 provides a balance between edge sharpness and wear resistance, which results in consistent surface finish and extended tool life under varying conditions. The TSF chipbreaker is specifically shaped to control chips in ductile materials, reducing entanglement and improving process reliability. Since the grade is aimed at mid‑range operations, the insert supports productive turning without demanding extreme cutting parameters, making it suitable for a wide range of stainless‑steel components. Faster setup and secure clamping for repeatable results Designed as an ISO VCMT form, the insert ensures compatibility with standard holders where fit is governed by form, clearance angle, tolerance class, attachment method, size and thickness. The geometry includes a 0.8 mm corner radius, a 7° relief angle and a plate thickness of 3.18 mm, while the fixing uses a cylindrical hole with a one‑sided countersink (40°–60°). These measurable details enable straightforward clamping and repeatable index changes, which reduces downtime and improves process stability in production environments. System‑level flexibility and practical machining guidance The insert is intended to be used as part of a system: an indexable insert, a matching external holder or boring bar, and the appropriate shim/clamp set with replacement screws. Selection of chipbreaker and grade should be aligned with workpiece stability and the intended machining strategy; the TSF chipbreaker and the AH6225 grade are a combination that frequently delivers reliable chip control and stable cutting in medium operations. This focused configuration supports efficient cycle times and predictable tool life, contributing to an overall economical machining process. For application‑specific recommendations and to secure original Tungaloy VCMT110308-TSF AH6225 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss parameters, availability and delivery options. Technical data Article number: 6951547 Manufacturer SKU: TUN6951547 SKU: 6951547-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: VCMT110308-TSF AH6225 Dimensions & core data Size: 11 mm Corner radius: 0.8 mm Thickness: 3.18 mm Relief angle: 7° Approach/lead angle: 35° Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Materials & special features Material: carbide Grade/coating: AH6225 (PVD‑coated) Chipbreaker: TSF ISO designation: VCMT110308-TSF Typical application: turning (external and internal) System components: insert, appropriate external holder or boring bar, shim/clamp set, replacement screws Compatibility criteria: form, clearance angle, tolerance class, attachment, size, thickness FAQ What materials is this insert suited for? The VCMT110308-TSF AH6225 is optimised for machining stainless steels and performs well under medium cutting conditions where a balance of edge sharpness and wear resistance is required. How does the TSF chipbreaker affect machining? The TSF chipbreaker on the VCMT110308-TSF promotes controlled chip formation in ductile materials, improving chip evacuation and reducing the risk of entanglement during turning. What dimensions and angles are relevant for selecting a holder? Key values to match are the 11 mm size, 3.18 mm thickness, 0.8 mm corner radius and the 7° relief angle; the cartridge or holder must accept the VCMT form and accommodate the cylindrical hole with countersink. Is the insert suitable for internal turning as well as external? Yes, the insert and its chipbreaker are intended for both external and internal turning operations when the appropriate boring bar and clamping system are used. Which grade and coating does the insert use and what benefit does it bring? The insert is supplied in AH6225, a PVD‑coated carbide grade that delivers a sharp, stable cutting edge with improved wear resistance in variable conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 110308 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide, the AH6225 grade and the TM chipformer for reliable turning of stainless steels; order the VCMT110308-TM AH6225 directly via Metav Werkzeuge or ask our consultants if needed. VCMT110308-TM AH6225 – Turning insert VCMT 110308 AH6225 (PVD-coated carbide, TM chipformer) by Tungaloy VCMT110308-TM AH6225 is an ISO-standard rhombic turning insert designed for external and internal turning applications, optimised for stainless-steel machining with a 35° approach angle. PVD-coated carbide for stainless steels Chipformer TM for controlled chip flow Rhombic insert 11 size, 35° cutting angle Cylindrical hole with single-sided countersink Consistent edge life and process reliability for stainless-steel turning The VCMT110308-TM AH6225 is engineered as a PVD-coated carbide insert in the AH6225 grade to deliver a balance of sharpness and edge stability in medium-duty stainless-steel operations. The TM chipformer improves chip control, reducing risk of built-up edge and secondary re-cutting; this leads to fewer interruptions, steadier tool life and more predictable cycle times. The combination of coating and substrate enhances wear resistance under variable cutting conditions, which contributes directly to higher process uptime and consistent surface quality. ISO compatibility and holder selection made clear As an ISO-standard turning insert, compatibility depends on insert form, clearance angle, tolerance class, fastening and thickness. The rhombic VCMT shape with a 35° cutting angle and 7° relief requires a matching external holder or boring bar that accepts size 11 inserts and a 3.18 mm plate thickness. The cylindrical hole with single-sided countersink (40°–60°) ensures secure clamping and simple replacement; specifying these values when selecting a holder prevents assembly issues and ensures the intended cutting geometry and stability during operation. Shop-floor benefits: surface finish, repeatability and reduced rework A 0.8 mm corner radius offers a pragmatic compromise between a robust cutting edge and acceptable surface finish, making the insert suitable for medium passes where both tool life and appearance matter. The rhombic geometry and TM chipformer reduce long, stringy chips typical of stainless steels, while the PVD-coated carbide minimises adhesion and wear. The resulting advantages are measurable: fewer interruptions for edge dressing, lower scrap rates and more repeatable component dimensions, which together improve throughput and reduce overall machining costs. For reliable stainless-steel turning choose the Tungaloy VCMT110308-TM AH6225 and contact Metav Werkzeuge for specification support or ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951585 SKU: 6951585-Tungaloy Manufacturer SKU: TUN6951585 Product name: VCMT110308-TM AH6225 Model series: ISO turning indexable inserts Material: carbide Core dimensions & values Insert size: 11 mm Thickness: 3.18 mm Cutting angle: 35° Clearance angle: 7° Corner radius: 0.8 mm Hole: cylindrical hole + single-sided countersink (40°–60°) Features & materials Coating: PVD Grade: AH6225 Chipformer: TM Shape: rhombic Application: turning (external and internal) Typical substrate: carbide FAQ What materials is this insert best suited for? The VCMT110308-TM AH6225 is formulated as a universal grade for stainless steels; the PVD-coated carbide and chipformer TM specifically target the typical adhesion and chip-forming challenges of stainless-steel machining. How does the TM chipformer influence machining performance? The TM chipformer on this turning insert promotes controlled chip breakage and evacuation, which reduces recutting and enhances tool life for medium cutting depths in stainless-steel operations. Which holder characteristics are essential for correct fitment? A holder must match the rhombic VCMT form, accept size 11 inserts, accommodate a 3.18 mm plate thickness and provide correct clamping for the cylindrical hole with a single-sided countersink to ensure secure fastening and stable cutting geometry. Can the insert be used for internal and external turning? Yes, the ISO-standard geometry and hole design permit use in suitable external holders and boring bars for internal turning, provided the holder matches the insert form and dimensions. What surface finish and repeatability benefits can be expected? With a 0.8 mm corner radius and the AH6225 grade, users can expect improved edge stability and consistent surface quality during medium-duty stainless-steel machining, resulting in fewer reworks and better dimensional repeatability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 AH6235 Wendeplatten - Tungaloy
VCMT 110308 AH6235 — ISO-Drehwendeschneidplatte zum Drehen (Tungaloy) Die VCMT 110308 AH6235 ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen, speziell abgestimmt auf die Bearbeitung von rostfreiem Stahl und unterbrochenen Schnitten PVD-Beschichtung für höhere Standzeit Zähere Sorte für rostfreie Stähle Rhombische Form für vielseitigen Einsatz Mit Loch und einseitiger Senkung für sichere Fixierung Langlebigkeit durch Material und Beschichtung Die Kombination aus robustem Hartmetall und PVD-Beschichtung sorgt für eine verbesserte Verschleißfestigkeit und reduzierte Ausbruchneigung. Durch die zähere Sortenwahl AH6235 werden insbesondere Bearbeitungen an rostfreiem Stahl sicherer, weil die Schneidkante weniger zu Ausbrüchen neigt. Das Resultat ist eine längere Standzeit des Einsatzwerkzeugs und geringerer Stillstand in der Fertigung. Präzise Anwendung bei anspruchsvollen Werkstoffen Für das Drehen unterbrochener Schnitte und bei hoher Ausbruchgefahr bietet die Platte mit dem PSS-Spanbrecher konstante Spanformung und Prozesssicherheit. Die rhombische Plattenform kombiniert mit einem Eckenradius von 0,8 mm ermöglicht präzise Konturierungen bei gleichzeitig stabiler Schneidkante. Anwender profitieren von gleichbleibender Bearbeitungsqualität und reproduzierbaren Ergebnissen. Einfache Integration und sichere Befestigung Die Platte ist ISO-genormt und kompatibel mit gängigen Werkzeughalter-Systemen; die Kompatibilität hängt von Form, Freiwinkel, Toleranz und Plattendicke ab. Die Ausführung mit Loch und zylindrischem Loch plus einseitiger Senkung (40°–60°) gewährleistet eine formschlüssige Befestigung und erleichtert den Wechsel im Produktionsprozess. Dadurch reduziert sich die Einrichtzeit an der Maschine. Wirtschaftlichkeit und zielgerichteter Einsatz Durch die gezielte Sortenwahl AH6235 lässt sich die Produktivität bei der Bearbeitung von rostfreiem Stahl steigern, weil weniger Nacharbeit und Austausch der Wendeschneidplatte erforderlich werden. Unternehmen erreichen so niedrigere Stückkosten und höhere Anlagenverfügbarkeit. Die ISO-Normierung sorgt zusätzlich für erleichterte Beschaffungs- und Lagerprozesse. Empfehlung: Für belastbare und prozesssichere Bearbeitung die VCMT 110308 AH6235 direkt über Metav Werkzeuge anfragen oder die Anwendungstechnik für die passende Sorten- und Spanbrecherwahl kontaktieren – eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6890225 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten SKU: 6890225-Tungaloy Daten Radius: 0,8 mm Winkel: 35° Freiwinkel: 7° Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Material: Hartmetall Beschichtung: PVD-beschichtet — PVD = Physikalische Dampfablagung Sorte: AH6235 — zähere Hartmetallsorte für rostfreie Stähle Spanbrecher: PSS Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch ISO-Bezeichnung: 110308 — ISO-genormt FAQ Für welche Werkstoffe ist diese Wendeschneidplatte geeignet? Die Wendeschneidplatte VCMT 110308 AH6235 von Tungaloy ist besonders geeignet für die Bearbeitung von rostfreiem Stahl und bei Anwendungen mit unterbrochenem Schnitt, wo erhöhte Ausbruchgefahr besteht. Welche Vorteile bietet die AH6235-Sorte? Die AH6235-Sorte zeichnet sich durch erhöhte Zähigkeit aus, was bei der VCMT 110308 AH6235 die Ausbruchresistenz verbessert und die Standzeit im Einsatz an rostfreiem Stahl erhöht. Welche Rolle spielt der Spanbrecher PSS? Der PSS-Spanbrecher sorgt für kontrollierte Spanbildung und reduziert das Risiko von Spanvermengung und Aufbauschneiden, was die Prozesssicherheit bei der VCMT 110308 AH6235 erhöht. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110308 AH725 Wendeplatten - Tungaloy
Take advantage of a PVD‑coated AH725 grade for consistent wear resistance and the ISO‑standard VCMT form for easy holder compatibility; the result is dependable performance across steel and stainless steel applications. Order the insert directly via Metav Werkzeuge or consult the technical advisors for process matching and availability. VCMT110308-PSS AH725 — ISO turning insert for external and internal turning — Tungaloy The VCMT110308-PSS AH725 is a rhombic ISO turning insert engineered for reliable external and internal turning, combining a universal, breakout‑resistant grade with a PVD coating for stable cutting on steel and stainless steel. PVD-coated AH725 for consistent performance Universal for steel and stainless steel ISO rhombic VCMT 110308 geometry 0.8 mm corner radius with central hole Consistent cutting performance for mixed‑material production The PVD‑coated, carbide cutting grade AH725 is designed as a universal, breakout‑resistant solution where material mix and small tool sizes require high process security. With its PVD layer and carbide substrate, the insert delivers improved wear resistance and a stable cutting edge under varying cutting conditions, which reduces unscheduled tool changes and aids predictable cycle times. That combination makes it particularly suitable for job shops and flexible production lines that switch between alloyed steels and stainless steels. Accurate system fit and predictable chip control Built to the ISO VCMT geometry, the insert offers a rhombic profile with a 35° included angle and a 7° relief, ensuring the correct engagement geometry with compatible holders. The 0.8 mm corner radius and 3.18 mm plate thickness contribute to edge strength and allow controlled depth‑of‑cut choices. The central cylindrical hole with a one‑sided countersink (40°–60°) ensures secure clamping and repeatable positioning; compatibility is determined by form, relief angle, tolerance class, fixing method, size and thickness, so selection of the matching external holder or boring bar is essential for best results. Productivity advantages and practical handling on the shop floor Equipped with the PSS chipbreaker, the insert promotes stable chip formation across a wide range of cutting parameters, supporting predictable surface quality and extended tool life. The modest corner radius helps balance surface finish and edge robustness for medium and finishing passes. As part of an ISO insert system, the package concept typically includes a suitable holder, shim/locking set and replacement screws to simplify maintenance and reduce downtime. For routine workshop operations, this configuration supports efficient set‑ups and fewer interruptions for tool changes. For availability and tailored recommendations on Tungaloy turning inserts such as the AH725 grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6864897 SKU: 6864897-Tungaloy Manufacturer SKU: TUN6864897 Model series: ISO‑turning inserts Designation: VCMT110308-PSS AH725 Brand: Tungaloy Material: carbide Facts Corner radius: 0.8 mm Thickness: 3.18 mm Size (inscribed circle): 11 Relief angle: 7° Included angle: 35° Countersink angle: 40°–60° Special features PVD‑coated carbide, grade AH725 Chipbreaker: PSS Rhombic shape (VCMT) With cylindrical hole and one‑sided countersink Application: turning — external and internal Compatibility determined by form, relief, tolerance class, fixing method, size and thickness System: compatible external holder or boring bar; shim/locking set; replacement screws FAQ Which materials are best suited to this insert? The VCMT110308‑PSS AH725 insert is optimised for machining steel and stainless steel, with the AH725 grade offering breakout resistance and stable cutting across mixed materials. What is the corner radius and how does it affect results? The corner radius is 0.8 mm, which supports a balance between edge strength and surface finish; it is suitable for medium and finishing passes where a controlled surface quality is required. How is holder compatibility determined for this ISO insert? Compatibility depends on the insert form, relief angle, tolerance class, fixing method, size and thickness; the ISO VCMT geometry ensures wide compatibility with matching holders and boring bars. What advantages does the PVD coating provide? The PVD coating on the AH725 grade increases wear resistance and protects the cutting edge at elevated temperatures, contributing to longer life and more consistent process performance. Is this insert suitable for roughing and finishing operations? The grade and PSS chipbreaker provide a universal solution; selection of cutting parameters and holder rigidity will determine suitability for roughing or finishing in specific applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 AH725 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide wear resistance and the PS chipbreaker for stable chip control; ISO compatibility allows rapid integration into existing turning tool systems. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. VCMT110308 AH725 — ISO turning insert VCMT110308-PS AH725 by Tungaloy, PVD-coated carbide with PS chipbreaker and 35° geometry A VCMT110308-PS AH725 insert designed for ISO‑standard turning applications, offering a universal, fracture‑resistant grade suited to steel and stainless steel in both external and internal turning operations. ISO‑standard VCMT form, 35° cutting angle PVD‑coated carbide grade AH725 for steels PS chipbreaker for stable chip control 0.8 mm corner radius; cylindrical hole with countersink Consistent chip control for reliable production The rhombic insert geometry with a 35° cutting angle and the dedicated PS chipbreaker deliver predictable chip formation and evacuation under varying cutting conditions. The combination of the chipbreaker design and the 0.8 mm corner radius reduces the risk of built‑up edge and breakouts during interrupted cuts or mixed material runs, which enhances process stability on small tools and demanding setups. This results in fewer unplanned tool changes and a more continuous production flow. Durable grade for mixed steels and higher process security The AH725 grade is a PVD‑coated carbide developed as a universal, fracture‑resistant option for machining steel and stainless steel, making it especially suitable where workpiece types vary. The PVD coating improves wear resistance and heat tolerance, extending tool life in many turning operations. Explained simply: the coating forms a thin, hard layer that reduces abrasion and maintains edge integrity, while the core carbide substrate provides toughness against mechanical loads. ISO compatibility and straightforward integration into tool systems As an ISO‑standard turning insert, compatibility with holders is defined by form, clearance angle, tolerance class, fastening method, size and thickness. The insert is rhombic, 11 mm in size, 3.18 mm thick and supplied with a cylindrical hole plus a single‑sided countersink (40°–60°), facilitating secure clamping in common external holders or boring bars. The modular system approach — insert, matching outer holder or boring bar, shim/clamp set and spare screws — simplifies inventory and reduces setup time when swapping inserts between machines. Practical benefits for workshop efficiency Choosing this insert supports consistent surface finish and repeatable performance thanks to its engineered geometry and coating. The PVD‑coated AH725 grade balances wear resistance and edge toughness, which is particularly advantageous for shops running mixed batches or seeking to reduce variety in insert families. Fewer tool failures and stable chip control contribute to higher uptime and reduced process variation, thereby improving productivity across turning operations. For assured process security with Tungaloy's AH725 grade, contact Metav Werkzeuge today at info@metav-werkzeuge.com or +49 2822 7131930 to discuss application suitability and availability. Technical data Article number: 6856693 SKU: 6856693-Tungaloy Manufacturer article number: TUN6856693 Model series: ISO-Drehwendeschneidplatten Application: Drehen Designation: VCMT110308-PS AH725 Facts Corner radius: 0.8 mm Plate thickness: 3.18 mm Plate size: 11 mm Clearance angle: 7° Cutting angle: 35° Special features Material: PVD‑coated carbide Grade: AH725 Chipbreaker: PS Shape: rhombic Hole: with hole Hole style: cylindrical hole + single‑sided countersink (40°–60°) ISO designation: VCMT110308-PS Typical system: insert + outer holder/boring bar + shim/clamp set + spare screws FAQ What materials is this insert suitable for? The VCMT110308-PS AH725 insert is specified for machining steel and stainless steel; the AH725 PVD‑coated carbide grade provides improved wear resistance and fracture control for mixed material runs. How does the PS chipbreaker benefit turning operations? The PS chipbreaker on this insert promotes short, manageable chips and reliable evacuation, improving process stability and reducing the risk of chip entanglement during external and internal turning. What are the key dimensions to check for holder compatibility? Check the ISO form (VCMT), plate size (11 mm), thickness (3.18 mm), hole type (cylindrical with countersink) and clearance angle (7°) to ensure the insert fits the intended holder and tolerance class. Is the coating suitable for higher cutting speeds? The PVD coating on the AH725 grade increases heat and wear resistance, supporting efficient performance across a range of cutting speeds typical for steel and stainless steel applications. Can this insert be used for interrupted cuts or unstable setups? Yes, the fracture‑resistant AH725 grade combined with the PS chipbreaker and 0.8 mm corner radius improves robustness in interrupted cutting and less rigid setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8005, a PS chipbreaker and a 0.8 mm corner radius for stable, long-lasting turning performance; order the VCMT110308-PS AH8005 insert directly via Metav Werkzeuge or ask our consultants if needed. VCMT 110308 AH8005 – Turning indexable insert (ISO) by Tungaloy VCMT 110308 AH8005 is a PVD-coated carbide indexable insert for stable external and internal turning of heat-resistant alloys and hard materials. PVD-coated carbide AH8005 grade for wear resistance PS chipbreaker for consistent chip control Rhombic shape, 11 mm size, 0.8 mm corner radius Cylindrical hole with single-sided countersink 40°–60° Outstanding wear resistance for demanding materials The VCMT110308-PS AH8005 insert combines a PVD-coated surface with a wear-resistant carbide substrate to deliver consistent cutting life when machining heat-resistant alloys and other hard workpieces. The AH8005 grade is engineered for stable metal removal under elevated temperatures; the coating reduces flank and crater wear while maintaining edge integrity. With an 11 mm nominal size and 3.18 mm thickness, the insert balances rigidity and accessibility in confined turning operations. The result is fewer tool changes and improved process economy through extended lifetime and reproducible performance. Secure clamping and system compatibility for reliable set‑up Compatibility with holders is defined by form, clearance, tolerance class, attachment method, size and thickness, and this insert conforms to the ISO indexable insert system. The rhombic geometry with an included angle of 35° and a 7° clearance angle ensures predictable seating and cutting geometry in standard ISO external holders or boring bars. The cylindrical hole with a single-sided countersink (40°–60°) provides positive location and clamping with standard screws and shims, simplifying reindexing and spare parts management. Integration into an ISO-based system reduces setup time and supports mixed-holder inventories. Consistent chip control and surface finish with minimal vibration The PS chipbreaker is tuned for stable chip formation under moderate to heavy cuts, improving evacuation and reducing built-up edge tendencies on difficult-to-machine alloys. The 0.8 mm corner radius provides a compromise between edge strength and form accuracy, enabling better surface finish while preserving edge life in interrupted or continuous cuts. For shops seeking consistent dimensional and finish results, the insert’s geometry and coating work together to lower scrap rates and enhance throughput, making it a pragmatic choice for productivity-driven turning operations. For precise application guidance or to secure Tungaloy VCMT110308-PS AH8005 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 6775811-Tungaloy Manufacturer SKU: TUN6775811 Manufacturer article number: 6775811 Label: VCMT110308-PS AH8005 Model series: ISO turning indexable inserts Material: Carbide Measurements Corner radius: 0.8 mm Insert size: 11 mm Thickness: 3.18 mm Clearance angle: 7° Included angle: 35° ISO designation: 110308 Design & features Coating / grade: AH8005 (PVD-coated) Chipbreaker: PS Shape: Rhombic Hole: Cylindrical hole + one-sided countersink 40°–60° Suitable for: External and internal turning System components: insert, outer holder or boring bar, shim/clamping set and replacement screws FAQ Which materials is this insert best suited for? The VCMT110308-PS AH8005 insert (Tungaloy) is optimised for heat-resistant alloys and other hard materials where wear resistance and stable edge life are required. How is compatibility with holders determined? Compatibility depends on form, clearance angle, tolerance class, attachment, size and thickness; the insert follows ISO indexing and fits matching ISO external holders or boring bars. What benefit does the PS chipbreaker provide? The PS chipbreaker on this insert supports controlled chip formation and evacuation, improving machining stability and surface finish in turning operations. What are the key dimensional details to consider? Important dimensions include a corner radius of 0.8 mm, insert size 11 mm, thickness 3.18 mm and a 7° clearance angle; these values influence cutting strength and accessibility. How does the hole and countersink affect clamping? The cylindrical hole with a single-sided countersink (40°–60°) enables secure location and clamping with standard screws and shims, aiding repeatable set-up and safe insert retention. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 AH8015 Wendeplatten - Tungaloy
Take advantage of a balanced combination of PVD‑coated carbide AH8015, a 0.8 mm corner radius and rhombic geometry for consistent edge stability and long tool life; order directly via Metav Werkzeuge or request a technical consultation for optimal holder matching. VCMT110308-TM AH8015 — ISO turning indexable insert for turning (Tungaloy) The VCMT110308-TM AH8015 is an ISO‑conforming turning insert engineered for general machining of heat‑resistant alloys, offering a mix of wear resistance and cutting‑edge robustness in a rhombic form factor. PVD-coated carbide grade AH8015 Rhombic insert, 11 mm size 0.8 mm corner radius for robustness Cylindrical hole with single-side countersink High‑performance grade for stable machining The PVD‑coated carbide composition of this insert (grade AH8015) provides a balanced combination of wear resistance and edge stability, specifically suited to the demands of machining heat‑resistant alloys. This balance reduces the frequency of tool changes and supports steady cutting conditions, which in turn contributes to a more predictable production rhythm. For operations where tool life and consistent component quality matter, the coated carbide chemistry and the insert’s geometry deliver measurable process reliability. Geometry that supports accuracy and vibration control With an 11 mm size, 3.18 mm thickness and a 0.8 mm corner radius, the insert’s rhombic format is designed to maintain profile accuracy while resisting edge chipping. The listed 7° clearance promotes favourable cutting angles and helps to reduce rubbing on the component surface, which benefits surface finish and dimensional control. These geometric parameters make the insert suitable for both external and internal turning tasks where stable chip flow and reduced vibration are required. Chip control and system compatibility explained The integrated chipbreaker TM is optimised for chip segmentation when machining tougher alloys; it assists in forming short, controllable chips that are simpler to evacuate from the cutting zone. The insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure fastening. As an ISO insert (code 110308), compatibility with a holder depends on matching the insert form, clearance, tolerance class, fastening method, size and thickness. This system approach ensures reliable clamping and repeatable positioning in a suitable external holder or boring bar. Selecting inserts for efficient production Choosing the correct combination of chipbreaker and grade is essential for optimising cycle times and surface quality. For general turning of heat‑resistant alloys, the AH8015 grade with the TM chipbreaker offers a pragmatic compromise between cutting‑edge longevity and fracture resistance. Correct pairing with a matched ISO holder reduces set‑up time and minimises rework, helping to sustain throughput and lower overall machining costs while maintaining consistent component finish. Contact Metav Werkzeuge for a tailored recommendation on matching the VCMT110308-TM AH8015 to holders and process parameters; technical advisors are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6951586 Manufacturer SKU: TUN6951586 SKU: 6951586-Tungaloy Model series: ISO turning indexable inserts Label: VCMT110308-TM AH8015 Facts Insert size: 11 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 7° Wedge angle: 35° ISO code: 110308 Special features Material: carbide Coating / grade: PVD‑coated, AH8015 Chipbreaker: TM Shape: rhombic (VCMT) Hole: with hole; cylindrical hole + single‑side countersink 40°–60° Typical application: turning Compatible system: ISO insert; requires matching holder form, tolerance and fastening FAQ Which materials is this insert best suited for? The VCMT110308-TM AH8015 insert is optimised for the general machining of heat‑resistant alloys; the AH8015 grade balances wear resistance and edge stability for such materials. How does the TM chipbreaker influence chip formation? The TM chipbreaker promotes controlled chip segmentation and evacuation, improving machining safety and reducing the risk of chip‑related interruptions when using the VCMT110308-TM AH8015. What determines holder compatibility for this insert? Compatibility depends on holder form, free clearance, tolerance class, fastening method, insert size and thickness; the ISO 110308 designation aids selection of a matching clamp or holder. Can this insert be used for internal turning as well as external turning? Yes, the insert is designed for both external and internal turning applications when paired with a suitable external holder or boring bar. How should the ISO designation be read in practical terms? The ISO code 110308 identifies the insert’s standardised geometry and size range; combined with the VCMT family name it guides selection of the correct holder interface and clamping method. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH8015 grade and precise ISO geometry for reliable turning of heat‑resistant alloys; the 0.8 mm corner radius and chipbreaker PS ensure controlled chip formation and stable cutting edges for consistent production. Order the insert directly via Metav Werkzeuge or consult the technical team for application guidance. VCMT 110308 AH8015 — ISO rhombic turning indexable insert, PVD‑coated carbide, 0.8 mm radius (Tungaloy) The VCMT 110308 AH8015 is an ISO‑format rhombic indexable insert designed for external and internal turning, offering a balanced combination of wear resistance and cutting‑edge stability for heat‑resistant alloys. PVD‑coated carbide AH8015 Optimised chip control (chipbreaker PS) ISO rhombic shape, 35° cutting edge 0.8 mm corner radius for precision Longer tool life through a balanced PVD grade The combination of a PVD‑coating and the AH8015 carbide grade provides a controlled hardness and thermal resistance that is well suited to machining heat‑resistant alloys. This balance between wear resistance and edge stability reduces flank wear and maintains cutting performance over longer cycles, which in turn decreases tool change frequency and unplanned interruptions. The design focuses on predictable abrasion behaviour rather than aggressive coatings that trade one advantage for another. Predictable fit and repeatability for fast changeovers ISO conformity and a clear geometry result in reliable seating and repeatable results in a production environment. The insert offers a 35° cutting angle, 7° relief and a thickness of 3.18 mm, with a central cylindrical hole and a single‑side countersink (40°–60°) that match standard clamping systems. These measured dimensions deliver consistent positioning in matching holders, speeding up index changes and assuring a constant cutting datum for downstream operations. Controlled chip flow and consistent surface finish The dedicated chipbreaker PS promotes short, manageable chips during both external and internal turning, which is particularly valuable when machining stable feeds or interrupted cuts. As part of a system comprising the ISO insert, an appropriate holder and a clamping set, this solution supports steady material removal rates and an improved surface finish. Selection of the correct chipbreaker and grade, combined with the 0.8 mm corner radius, helps achieve the desired balance between productivity and component integrity. For application‑specific cutting data or to order Tungaloy turning inserts and compatible holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the VCMT 110308 AH8015 and recommended setups. Technical Data Article number: 6775812 SKU: 6775812-Tungaloy Manufacturer SKU: TUN6775812 Brand: Tungaloy Facts Size: 11 mm Thickness: 3.18 mm Cutting edge angle: 35° Relief angle: 7° Corner radius: 0.8 mm Special features ISO designation: VCMT110308-PS Grade: AH8015 Coating: PVD Material: carbide Shape: rhombic Chipbreaker: PS Hole: cylindrical hole + single-sided countersink (40°–60°) Application: turning FAQ Which materials is this insert best suited for? The VCMT110308-PS AH8015 insert from Tungaloy is formulated for machining heat‑resistant alloys and performs well in general turning applications where a balance of wear resistance and edge stability is required. What is the purpose of the PS chipbreaker? The PS chipbreaker yields short, controlled chips during turning, reducing entanglement and improving process stability when using the VCMT110308-PS AH8015 in moderate to heavy feeds. How does the ISO designation affect holder selection? ISO conformity of the VCMT110308-PS signals the required form, clearance, tolerance class, fastening and thickness; matching these parameters with an appropriate holder ensures secure clamping and repeatable results. What does the AH8015 grade mean in practice? AH8015 is a PVD‑coated carbide grade optimised for a broad range of alloys, offering balanced wear resistance and cutting‑edge stability to extend useful tool life while maintaining part quality. How can the insert be identified for a replacement order? Use the ISO code VCMT110308-PS together with the article number 6775812 or manufacturer SKU TUN6775812 to ensure correct replacement of the Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 AH8015 Wendeplatten - Tungaloy
VCMT 110308 AH8015 Drehwendeschneidplatte für Drehen von Tungaloy VCMT 110308 AH8015 ist eine ISO-genormte Drehwendeschneidplatte für das allgemeine Drehen von hitzebeständigen Legierungen und industrielle Anwendungen PVD-beschichtetes Hartmetall AH8015 Rhombische VCMT-Form, vielseitig einsetzbar 35° Winkel und 7° Freiwinkel, stabile Schneidkante Bohrung mit zylindrischem Loch und einseitiger Senkung TSF-Spanbrecher für kontrollierte Spanbildung Produktivität steigern durch langlebige Schneidkante Die VCMT110308-TSF AH8015 kombiniert Hartmetall mit einer PVD-Beschichtung, was die Verschleißfestigkeit deutlich erhöht und die Standzeit in Serienprozessen verbessert. Durch diese Material- und Beschichtungswahl reduzieren sich Werkzeugwechsel und Rüstzeiten, was die Effizienz in der Fertigung steigert. Für Betriebe bedeutet das weniger Stillstand, planbarere Prozesse und konstante Teilequalität bei längerem Einsatz. Präzision und Kompatibilität im Fertigungsprozess Die rhombische VCMT-Form mit Eckenradius 0,8 mm, Winkel 35° und Freiwinkel 7° sorgt für eine stabile Schneidkante und gute Zugänglichkeit an Außen- und Innendurchmessern. Die Plattendicke von 3,18 mm und die Plattengröße 11 mm entsprechen ISO-Normen, die Kompatibilität mit gängigen Haltern sichern. Die Bohrung mit zylindrischem Loch und einseitiger Senkung (40°–60°) gewährleistet einfache Befestigung und sichere Positionierung im Halter. Zielgruppen, Anwendung und Auswahlhinweise Die Platte richtet sich an Zerspanungsbetriebe, Lohnfertiger und Werkzeugmechaniker, die hitzebeständige Legierungen bearbeiten. AH8015 ist eine ausgewogene Sorte für allgemeine Anwendungen, die Verschleißfestigkeit und Schneidkantenstabilität vereint. Der TSF-Spanbrecher ist auf kontrollierte Spanbildung ausgelegt; bei schwer zerspanbaren Werkstoffen empfiehlt sich die Abstimmung von Schnittwerten und Spanformer zur Prozesssicherheit. Zur Auswahl des passenden Spanbrechers oder Halters empfiehlt sich Abgleich der Form, Dicke und Toleranzklasse. Für effiziente Bearbeitung hitzebeständiger Legierungen empfiehlt Metav Werkzeuge die VCMT 110308 AH8015 von Tungaloy; bei Fragen zur Einsatzoptimierung oder Halterkompatibilität kontaktieren Sie uns gern per E‑Mail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930 Leistungsmerkmale Artikelnummer: 6951548 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6951548 SKU: 6951548-Tungaloy Fakten Eckenradius: 0,8 mm Winkel: 35° Freiwinkel: 7° Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Material: Hartmetall Beschichtung: PVD (Physical Vapor Deposition) Sorte: AH8015 — erste Wahl für hitzebeständige Legierungen Spanbrecher: TSF — kontrollierte Spanbildung Form: Rhombisch (VCMT) Loch: Mit Loch; zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Drehen; Außen- und Innendrehen Norm: ISO-genormt FAQ Was zeichnet die VCMT110308-TSF AH8015 aus? Die VCMT110308-TSF AH8015 von Tungaloy verbindet PVD-beschichtetes Hartmetall mit einem TSF-Spanbrecher und bietet dadurch hohe Standzeit bei gleichbleibender Oberflächengüte, ideal für Serienfertigung an hitzebeständigen Legierungen. Für welche Werkstoffe ist die Platte geeignet? Die Sorte AH8015 ist speziell für hitzebeständige Legierungen konzipiert; sie eignet sich außerdem für breitere Werkstoffbereiche, wenn Spanformer und Schnittwerte entsprechend angepasst werden. Welche Vorteile bietet der TSF-Spanbrecher? Der TSF-Spanbrecher fördert kontrollierte Spanbildung, reduziert Spanprobleme bei tieferen Schnitten und trägt zur Prozesssicherheit und Teilequalität bei. Wie stelle ich die Kompatibilität mit dem Halter sicher? Kompatibilität ergibt sich aus Form (VCMT), Plattendicke 3,18 mm, Plattengröße 11 mm, Lochausführung und Toleranzklasse; prüfen Sie Halterdaten gegen diese Parameter oder fragen Sie unsere Beratung. Ist die Platte für Innen- und Außenbearbeitung geeignet? Ja, die VCMT110308-TSF AH8015 ist für Außen- und Innendrehen einsetzbar; die rhombische Form und der Freiwinkel unterstützen den Einsatz in beengten Bereichen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110308 AT9530 Wendeplatten - Tungaloy
A reliable combination of the AT9530 coated cermet grade and a PS chipbreaker ensures consistent surface finish and even wear during finishing and light machining. The rhombic ISO format and defined corner radius support stable clamping and reproducible results. Order the item via Metav Werkzeuge or consult the Metav team for application-specific recommendations. VCMT110308-PS AT9530 – ISO rhombic turning insert for finishing, Tungaloy VCMT110308-PS AT9530 is an ISO‑format rhombic turning insert engineered for finishing and light turning operations on steel components VCMT ISO 110308 format for stable clamping AT9530 coated cermet for superior surface finish PS chipbreaker tuned for finishing cuts 0.8 mm corner radius and 7° clearance angle Exceptional finishing for steel components The VCMT110308-PS AT9530 combines a precision geometry with the AT9530 coated cermet to prioritise surface quality and uniform wear. The PS chipbreaker and rhombic profile produce a fine, consistent cutting action that reduces the need for secondary finishing. For production environments where repeatable topography and low micro‑chatter matter, this design supports tighter tolerances and fewer rejects, translating into lower rework rates and predictable tool life. Controlled chip flow and cutting stability A defined chip‑control geometry is central to efficient finishing. The PS chipbreaker directs chip formation for light cuts, limiting recutting and promoting stable thermal behaviour. Coupled with the 0.8 mm corner radius and 7° clearance, the geometry reduces cutting forces in fine feeds and helps maintain edge integrity. This results in steady machining performance on less rigid setups and improves surface integrity on turned faces and internal bores. ISO compatibility and system considerations Built to ISO plate standards, the insert fits ISO‑compliant holders when form, clearance angle, tolerance class, fastening method, size and thickness match. The plate thickness of 3.18 mm and the cylindrical hole with a single‑sided countersink (40°–60°) ensure secure mounting and simple replacement. When integrating the insert into a tool system, select a holder and clamping kit that correspond to the ISO dimensions to preserve repeatability and minimise assembly deviation. Practical guidance for selection and use For finishing and light machining of steel, the AT9530 grade offers a balance of surface finish and steady wear; select the PS chipbreaker for low‑volume chips and good surface integrity. Use stable setups where possible and match feeds to the small corner radius to avoid overload. If process adaptation or alternative chipbreaker types are required for different steels or heavier cuts, Metav Werkzeuge can advise on compatible grades and holder options to optimise cycle time and tool life. For application advice or stock enquiries of the VCMT110308-PS AT9530 from Tungaloy, please contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 — technical consultation and order support are available Technical Data Article number: 6773761 Manufacturer SKU: TUN6773761 Metav SKU: 6773761-Tungaloy Designation: VCMT110308-PS Grade: AT9530 Chipbreaker: PS Data Corner radius: 0.8 mm Plate thickness: 3.18 mm Relief/clearance angle: 7° Insert size: 11 Included angle/wedge: 35° Special features ISO turning insert series for external and internal turning Coated cermet grade for finishing and light machining Rhombic plate form Cylindrical hole with single‑sided countersink (40°–60°) Application: turning FAQ What materials is this insert suited for? The AT9530 grade is formulated for finishing and light machining of steel; the VCMT110308-PS insert from Tungaloy performs well where surface finish and even wear are priorities. How should the insert be mounted in a holder? Mount the ISO‑format rhombic plate in a compatible ISO holder, ensuring the 3.18 mm thickness, hole style and tolerance class match the clamping system for secure, repeatable seating. What chip shape can be expected with the PS chipbreaker? The PS chipbreaker produces small, controllable chips suitable for finishing cuts, reducing recutting and helping maintain a consistent surface on turned parts when using appropriate feeds. Can the insert be used for internal turning? Yes; the ISO design and chip control make it suitable for both external and internal turning, provided the holder and setup offer adequate rigidity for finishing passes. What identifiers help when ordering spare inserts? Order by the full designation VCMT110308-PS AT9530 and reference the manufacturer article number 6773761 or the SKU TUN6773761 for clarity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 GT9530 Wendeplatten - Tungaloy
Coated GT9530 cermet and the PS chipbreaker combine to deliver durable cutting performance and improved surface quality for stable turning operations. The ISO‑compliant geometry and defined dimensions ensure straightforward integration into existing holder systems — order the VCMT110308-PS GT9530 directly via Metav Werkzeuge or request tailored advice from our consultants. VCMT110308-PS GT9530 — ISO turning insert, coated cermet, Tungaloy A VCMT110308-PS GT9530 is an ISO‑standard rhombic turning insert designed for finishing and light universal turning of steel in stable machining conditions Coated GT9530 cermet grade PS chipbreaker for fine finishing Rhombic VCMT, 11 mm × 3.18 mm 0.8 mm corner radius, 7° clearance Durable finishing and consistent surface quality The coated cermet composition of the GT9530 grade is tuned for wear resistance and consistent flank wear, which directly benefits repeatable surface finishes in finishing operations. By focusing on predictable tool life rather than maximum material removal, the insert reduces the frequency of index changes and supports longer uninterrupted production runs. This leads to improved component consistency and less variability in rework or inspection. Simple integration and reliable clamping for process security Designed to the ISO series, the insert’s form, 7° clearance, tolerance class, fastening style and 11 mm size define holder compatibility and simplify tool selection. The 0.8 mm radius provides a controlled cutting edge engagement suited to fine finishing, while the PS chipbreaker promotes regular chip formation under steady conditions. The defined 3.18 mm thickness and rhombic shape allow reliable clamping and contribute to process stability when paired with an appropriate holder. Application guidance for productive turning of steel Best employed for turning steel where surface quality and stable conditions prevail, the GT9530 grade is a wear‑resistant finishing to light‑universal solution. The insert is intended to be used as part of a complete system — ISO insert, matching external holder or boring bar, underlay/clamping set and spare screws — enabling quick replacement and consistent setup. Manufactured by Tungaloy, the component benefits from established material expertise and consistent production controls, supporting predictable machining results and reduced process variance. For application advice on the Tungaloy GT9530 coated cermet insert VCMT110308-PS (SKU TUN6998415), contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998415 Manufacturer SKU: TUN6998415 SKU: 6998415-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: VCMT110308-PS GT9530 Facts ISO code: 110308 Plate size: 11 mm Plate thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 35° Special features Grade: GT9530 Schneidstofftyp: coated cermet Plate form: rhombic Chipbreaker: PS Hole: with cylindrical hole + one-sided countersink (40°–60°) Intended use: turning FAQ What applications suit this insert best? The VCMT110308-PS GT9530 from Tungaloy is aimed at finishing and light universal turning of steel where dimensional accuracy and surface quality are priorities; its grade and chipbreaker are chosen for stable cutting conditions. How is holder compatibility determined? Compatibility for the VCMT110308-PS GT9530 depends on insert form, clearance angle, tolerance class, fastening method, plate size and thickness; matching these parameters ensures correct seating in the intended holder. What surface finish can be expected with GT9530? Using the GT9530 coated cermet grade with the PS chipbreaker typically produces improved surface quality compared with standard grades in stable turning operations, thanks to controlled wear and consistent chip formation. Which chipbreaker is integrated and what is its purpose? The PS chipbreaker fitted to this insert is designed for fine finishing; it promotes even chip control and reduces the risk of built‑up edge during steady turning of steel. Is this insert ISO‑standardised and easy to replace? Yes — the VCMT110308-PS GT9530 follows ISO insert conventions and pairs with the appropriate external holder, underlay and clamping set for straightforward replacement and predictable clamping behaviour. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 GT9530 Wendeplatten - Tungaloy
VCMT 110308 GT9530 Drehwendeschneidplatte für Drehen von Tungaloy VCMT 110308 GT9530 ist eine ISO-genormte Drehwendeschneidplatte für präzise Schlicht- und leichte Universaldreharbeiten beim Drehen ISO-konforme rhombische Platte 11 Beschichtetes Cermet GT9530 für längere Standzeit Eckenradius 0,8 mm für feine Konturen Freiwinkel 7° für ausgezeichnete Oberflächengüte Zylindrisches Loch mit 40°–60° Senkung Hohe Oberflächengüte bei Schlichtoperationen Die beschichtete Cermet-Sorte GT9530 wurde speziell für Schlicht- bis leichte Universalanwendungen entwickelt und liefert eine gleichmäßige Oberflächengüte bei stabilen Schnittbedingungen. Durch den Eckenradius 0,8 mm lassen sich feine Konturen und enge Toleranzen zuverlässig realisieren, was insbesondere bei Abschlussbahnen und Aufarbeitungen sichtbar Zeit spart. Anwender profitieren von einer reduzierten Nachbearbeitung und gleichbleibender Bauteilqualität. Beschichtung und Material für längere Standzeit Dank des beschichteten Cermet und des harten Hartmetall-Trägerkerns ergibt sich eine vorteilhafte Kombination aus Verschleißfestigkeit und Kantenschnittigkeit. Die Sorte GT9530 bietet stabile Spanbildung und ist auf höhere Standzeiten bei Schlichtoperationen ausgelegt. Das Resultat ist eine höhere Produktivität durch weniger Plattenwechsel und konstantere Zerspanungsbedingungen bei Stahlbearbeitung. Passgenauigkeit, Geometrie und Werkstattintegration Die Platte ist ISO-genormt aufgebaut und kompatibel mit gängigen Außenhaltern, Bohrstangen und Klemmsätzen; die Passung wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke gewährleistet. Die rhombische Form mit Plattengröße 11 und Plattendicke 3,18 mm erlaubt vielseitige Einsatzwinkel, während das zylindrische Loch mit einseitiger Senkung (40°–60°) eine sichere Befestigung und exakte Wiederholgenauigkeit im Werkzeugsystem gewährleistet. Effizienzvorteile für Produktion und Anwender Im Serienbetrieb zeigt die Kombination aus Geometrie, Beschichtung und Material eine gute Prozessstabilität; dadurch sinkt der Ausschuss und die Stillstandszeit für Wechselintervalle wird reduziert. Für Werkstätten, die auf konsistente Oberfläche und planbare Standzeiten Wert legen, bedeutet das: geringere Kosten pro bearbeitetem Bauteil und besser kalkulierbare Ablaufzeiten. Die Platte eignet sich besonders für Anwendungen, bei denen eine hohe Oberflächengüte bei gleichzeitig guter Wirtschaftlichkeit gefragt ist. Empfehlung: Die beschichtete Cermet-Wendeschneidplatte von Tungaloy überzeugt durch Standzeit und Oberflächengüte – für Beratung und Bestellung kontaktieren Sie bitte info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6998410 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6998410 Daten Eckenradius: 0,8 mm Winkel: 35° Freiwinkel: 7° Plattendicke: 3,18 mm Plattengröße: 11 Besonderheiten Material: Hartmetall Sorte/Beschichtung: GT9530 Schneidstofftyp: beschichtetes Cermet Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: PSS (feine Spanformung) FAQ Welche Materialien lassen sich mit der VCMT 110308 GT9530 bearbeiten? Die VCMT 110308 GT9530 von Tungaloy ist ausgelegt für die Bearbeitung von Stahl; die beschichtete Cermet-Sorte GT9530 optimiert Standzeit und Oberfläche bei schlichten Schnittbedingungen. Wie beeinflusst der Eckenradius die Bearbeitungsergebnisse? Ein Eckenradius von 0,8 mm sorgt bei der VCMT110308-PSS für feinere Kantenradien und verbesserte Oberflächengüte, besonders bei Endbearbeitungen und engen Toleranzen. Ist die Platte mit handelsüblichen Haltern kompatibel? Ja, die ISO-genormte Geometrie der VCMT 110308 GT9530 ermöglicht Kompatibilität mit Standard-Außenhaltern und Bohrstangen, solange Form, Größe, Dicke und Befestigung übereinstimmen. Welche Vorteile bietet die Beschichtung GT9530 in der Praxis? Die GT9530-Beschichtung erhöht die Verschleißfestigkeit und Standzeit der VCMT110308-PSS, wodurch weniger Plattenwechsel und stabilere Zerspanungsbedingungen erzielt werden. Für welche Bearbeitungsarten ist die VCMT110308-PSS besonders geeignet? Die VCMT110308-PSS eignet sich primär für Schlicht- und leichte Universaldrehoperationen beim Drehen, wenn gute Oberfläche und längere Standzeit gefordert sind. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110308 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of ISO compatibility, a sharp cutting geometry and the NS9530 cermet for outstanding finishing on steel; easy integration with standard toolholders ensures fast changeover and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. VCMT110308-PS NS9530 indexable turning insert (ISO 110308) — fine finishing for steel — Tungaloy The VCMT110308-PS NS9530 is an ISO-standard rhombic indexable turning insert engineered for fine finishing of steel components in external and internal turning operations. ISO 110308 standard dimension compatibility Uncoated cermet grade NS9530 for fine finishing Sharp cutting edge for low cutting forces 0.8 mm corner radius for excellent surface finish High-performance finishing with low cutting forces The rhombic ISO insert combines a sharp cutting edge and a finely tuned chipbreaker to deliver low cutting forces and consistently high surface quality on steel. The uncoated cermet NS9530 is optimised for continuous cutting and small depths of cut, reducing vibration and enabling stable machining at finishing feeds. This results in shorter downstream processing and demonstrable gains in throughput for repetitive production runs. Straightforward fitment to ISO toolholders — fewer setup queries Designed to the ISO 110308 specification, the insert guarantees repeatable seating and clamping in compatible holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The plate’s 3.18 mm thickness, 11 mm size and cylindrical hole with single-side countersink (40°–60°) facilitate secure mounting and quick index changes, supporting efficient tool management on the shop floor while minimising downtime. Material behaviour and when to select NS9530 The uncoated cermet NS9530 grade offers a sharp edge geometry that excels where surface finish is paramount. For finishing operations in steel it reduces built-up edge and delivers a refined topography, especially in continuous cuts. The 0.8 mm corner radius suits applications requiring fine edge strength without compromising on finish; the grade’s properties favour small axial depths and finishing feeds rather than heavy roughing cuts. Practical guidance for selection and typical use cases With the PS chipbreaker and the rhombic geometry, this insert is suitable for external and light internal turning where smooth chips and predictable evacuation are needed. Choose the insert when priority is high surface integrity, low cutting forces and consistent component quality. For mixed-material batches or interrupted cuts, review holder rigidity and cutting parameters; modest feed and stable clamping optimise life and surface results. For application guidance with Tungaloy’s NS9530 finishing insert, contact Metav Werkzeuge for tailored recommendations and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998605 Manufacturer SKU: TUN6998605 SKU: 6998605-Tungaloy Model series: ISO-Drehwendeschneidplatten Specifications ISO designation: 110308 Insert size: 11 mm Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 35° Materials & features Grade: NS9530 (uncoated cermet) Chipbreaker: PS Plate shape: rhombic Hole: with cylindrical hole + single-side countersink (40°–60°) Application: Turning (external and internal) Substrate material listed: Hartmetall FAQ What materials is this insert intended for? The VCMT110308-PS NS9530 is specified for finishing in steel; the NS9530 uncoated cermet is optimised for low cutting forces and high surface quality on steel components. Is the insert compatible with standard ISO holders? Yes. The insert follows the ISO 110308 designation and fits holders that accept the VCMT form, matching on form, clearance, tolerance class, fastener type, size and thickness. Which chipbreaker should be chosen for surface finishing? The PS chipbreaker fitted to this insert is designed to support continuous finishing cuts and consistent chip formation, making it suitable for achieving improved surface integrity. How should the insert be mounted to ensure stability? Secure the insert with the appropriate clamping plate and screw, ensuring the cylindrical hole and countersink align with the holder’s locating features to prevent movement and wear. What cutting conditions suit NS9530 best? NS9530 performs best in continuous finishing passes with modest depths of cut and finishing feeds, where a sharp edge and low cutting forces deliver superior surface finishes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 NS9530 Wendeplatten - Tungaloy
There is a data inconsistency that prevents a reliable product description. The supplied information lists the material as “Hartmetall” (cemented carbide) while the cutting material is specified as an uncoated cermet (NS9530); these are distinct and mutually exclusive tool material classifications. Because cermet and cemented carbide differ in composition, cutting behaviour, recommended cutting parameters and typical applications, it is not possible to determine the correct substrate, coating status or performance characteristics from the current data. Please clarify which specification is correct—whether the insert is a cermet grade NS9530 (uncoated) or a cemented carbide variant—and confirm any additional missing details such as coating, intended workpiece materials and the exact product designation to be used. Once the discrepancy is resolved, a full, compliant product description can be produced.
VCMT 110308 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing with the VCMT110308-PSS NS9530: its uncoated cermet cutting edge delivers low cutting forces and excellent surface finish for continuous turning operations; order via Metav Werkzeuge or request application advice from our consultants. VCMT 110308 NS9530 – ISO turning insert for finishing by Tungaloy The VCMT110308-PSS NS9530 is an ISO-standard rhombic turning insert optimised for finishing cuts on steel with a sharp edge and low cutting forces. Cermet grade NS9530 for fine finishing PSS chipbreaker for continuous cuts 0.8 mm corner radius for precise profiles 7° clearance and 35° approach angle Consistent finishing performance for steel components The uncoated cermet composition NS9530 is engineered for finishing on steel, offering a sharp cutting edge that reduces cutting forces and helps achieve a high surface finish. For operations with small depths of cut and continuous cutting regimes, this grade provides stable performance and predictable tool behaviour. The reduced cutting resistance also supports longer tool life in low-interruption processes, translating into greater process efficiency for high-volume production. Reliable compatibility and secure clamping in ISO systems Produced to ISO specifications, this rhombic insert matches holders by form, clearance, tolerance class, fixation method, size and thickness. The insert features a cylindrical hole with a single-sided countersink (40°–60°) for positive and repeatable clamping when paired with the correct holder, backing plate and screw set. Clearances such as the 7° relief and the 35° approach angle ensure predictable engagement and minimise vibration when integrated into a complete tool system. Productivity gains from geometry and chip control The PSS chipbreaker is tailored for smooth chip formation during continuous cuts, reducing interruption and improving surface integrity. Combined with the 0.8 mm corner radius, the geometry supports precise profile work and consistent edge strength. These attributes lower secondary finishing requirements and can shorten cycle times for parts requiring fine tolerances, making the insert a practical choice for production-focused workshops and precision turning tasks. Recommended applications and system setup Ideal for external and internal turning where finishing quality is paramount, the insert performs best in steady-state operations with small feeds and depths. A complete system comprises the ISO insert, a matched external holder or boring bar, a backing shim or clamp set and the appropriate mounting screws. Selecting the holder with matching approach angle and tolerance class is essential to exploit the insert’s benefits and achieve repeatable results. For application guidance on Tungaloy NS9530 finishing inserts and to check availability, contact Metav Werkzeuge for expert advice and supply by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6998600 Manufacturer SKU: TUN6998600 SKU: 6998600-Tungaloy Article name: VCMT110308-PSS NS9530 Facts Corner radius: 0.8 mm Relief angle: 7° Approach angle: 35° Plate thickness: 3.18 mm Plate size: 11 Special features Rhombic plate form Uncoated cermet cutting material (NS9530) Chipbreaker type: PSS Cylindrical hole with one-sided countersink (40°–60°) Suitable for turning applications Model series: ISO turning inserts Material: Hartmetall FAQ Which materials are best suited to this insert? The VCMT110308-PSS NS9530 is optimised for finishing on steel; the NS9530 cermet grade provides a sharp edge and low cutting forces suited to continuous finishing cuts on carbon and alloy steels. How does the PSS chipbreaker affect cutting performance? The PSS chipbreaker promotes stable chip formation during continuous cuts, improving surface quality and reducing interruptions compared with general-purpose breakers in the same geometry. What holder characteristics are required for correct compatibility? Compatibility depends on the ISO plate form, clearance angle, tolerance class, fixation method, size and thickness; use a holder matched to the rhombic VCMT form, 7° relief and 35° approach angle for repeatable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 NS9530 Wendeplatten - Tungaloy
VCMT 110308 NS9530 ISO-Drehwendeschneidplatte für Drehen von Tungaloy VCMT 110308 NS9530 eignet sich als Schlichtplatte für präzises Außen- und Innendrehen mit Fokus auf hohe Oberflächengüte Unbeschichtetes Cermet für feine Oberflächen Speziell für Schlichtschnitt und niedrige Schnittkräfte Rhombische Form, 11 mm Plattengröße, 0,8 mm Radius Mit zylindrischem Loch und einseitiger Senkung 40°–60° Effizienz bei Schlichtbearbeitung und Oberflächengüte Die NS9530-Sorte ist ein unbeschichtetes Cermet, das sich durch eine sehr scharfe Schneidkante und niedrige Schnittkräfte auszeichnet. Dadurch reduziert sich die Wärmeentwicklung an der Schnittzone, was zu einer verbesserten Oberflächengüte führt. Für Anwender bedeutet das weniger Nacharbeit und konstante Bauteilqualität bei kontinuierlichem Schlichtschnitt. Besonders in Serien mit kleinen Zustellungen zeigt sich ein wirtschaftlicher Vorteil durch längere Zerspanungszyklen zwischen den Werkzeugwechseln. Passgenaue Halterkompatibilität und Werkstattintegration Bei ISO-genormten Platten entscheidet die Form- und Befestigungsgeometrie über die Kompatibilität mit Haltern. Faktoren wie Freiwinkel, Plattendicke und Toleranzklasse bestimmen die sichere Montage und die Stabilität im Schnitt. Wer die VCMT 110308 NS9530 einsetzt, profitiert von klaren ISO-Vorgaben, die den Halterwechsel vereinfachen und Stillstandzeiten verringern. Eine saubere Befestigung über das zylindrische Loch mit Senkung sorgt für reproduzierbare Montagebedingungen. Typische Einsatzfelder und Anwendernutzen Die Platte ist für das Drehen von Stahl im Schlichtbereich ausgelegt und liefert bei kleinen Schnitttiefen hervorragende Ergebnisse. Werkstätten, die hohe Anforderungen an Bauteiloberflächen haben—beispielsweise in der Präzisionsfertigung oder beim Werkzeugbau—finden hier eine robuste Lösung. Durch den niedrigen Span- und Schnittkraftbedarf eignet sich die Platte zudem für Maschinen mit begrenzter Stabilität oder für Bauteile mit empfindlicher Auflage. Materialaufbau, Schneidstoffeigenschaften und Spanbildung Der Träger besteht aus Hartmetall, während der Schneidstoff als unbeschichtetes Cermet gestaltet ist, was eine feine Spanbildung und saubere Spanabfuhr fördert. Die Kombination aus Trägermaterial und Sorte gewährleistet eine konstante Schärfe der Schneidkante bei Schlichtanwendungen. Kurze Erläuterung: Cermet verbindet keramische und metallische Eigenschaften, wodurch sich speziell im Finish-Bereich sehr gute Ergebnisse erzielen lassen. Für präzise Schlichtbearbeitung empfehlen wir die VCMT 110308 NS9530 von Tungaloy – bei technischen Fragen oder Bestellwunsch gern per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 kontaktieren Produktmerkmale Artikelnummer: 6951589 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT110308-TM NS9530 Daten Eckenradius: 0,8 mm Freiwinkel: 7° Winkel: 35° Plattendicke: 3,18 mm Plattengröße: 11 mm Besonderheiten Material: Hartmetall Schneidstoff: unbeschichtetes Cermet Sorte: NS9530 Spanbrecher: TM — Schlichtspanformer Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) ISO-genormt VCMT: ISO-Formcode zur Einordnung der Plattengeometrie FAQ Wie unterscheidet sich die NS9530-Sorte von anderen Schlichtsorten? Die NS9530-Sorte ist ein unbeschichtetes Cermet, das besonders auf sehr scharfe Schneidkanten und niedrige Schnittkräfte ausgelegt ist. Bei der VCMT110308-TM NS9530 von Tungaloy zeigt sich dies in deutlich verbesserter Oberflächengüte und stabiler Spanbildung beim Schlichten von Stahl. Für welche Werkstoffe ist diese Wendeschneidplatte geeignet? Hauptsächlich ist die Platte für Stahl-Schlichtanwendungen ausgelegt. Die Kombination aus Hartmetallträger und Cermet-Schneidstoff macht die VCMT110308-TM NS9530 ideal für kontinuierliche Schnitte mit kleinen Zustellungen. Welche Halter sind kompatibel mit dieser Plattengröße? Kompatibilität richtet sich nach ISO-Formcode, Freiwinkel, Plattendicke und Befestigungsart. Die rhombische Form und das zylindrische Loch mit Senkung ermöglichen eine breite Auswahl an ISO-kompatiblen Außenhaltern und Bohrstangen. Wie beeinflusst der Eckenradius von 0,8 mm das Bearbeitungsergebnis? Der Eckenradius von 0,8 mm bietet eine gute Balance zwischen Stabilität der Schneidkante und Feinheit der Oberfläche. Für sehr filigrane Profile kann ein kleinerer Radius sinnvoll sein, für robustere Schnitte ein größerer Radius. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110308 T6215 Wendeplatten - Tungaloy
VCMT 110308 T6215 Drehwendeschneidplatten für Drehen — Tungaloy VCMT 110308 T6215 ist eine ISO-genormte Drehwendeschneidplatte für das Drehen rostfreier Stähle unter stabilen bis leicht unterbrochenen Bedingungen. VCMT110308-TSF rhombische Platte, 11 mm CVD-beschichtetes Hartmetall, Sorte T6215 Eckenradius 0,8 mm für feine Oberflächen Mit zylindrischem Loch und einseitiger Senkung Für Außen- und Innendrehen geeignet Präzise Schneidleistung und Materialverträglichkeit Die VCMT110308-TSF liefert konstante Ergebnisse beim Drehen von rostfreiem Stahl dank der CVD-beschichteten Hartmetall-Sorte T6215. Die Beschichtung verbessert die Verschleißfestigkeit und sorgt für stabile Spanbildung bei mittleren Schnittparametern. Anwender profitieren von gleichbleibender Oberflächengüte und längeren Werkzeugstandzeiten, was sich direkt in höherer Wirtschaftlichkeit und geringeren Stillstandzeiten niederschlägt. Einfache Integration in bestehende Werkzeugaufbauten Die Platte ist Teil der ISO-Modellserie und lässt sich durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke mit gängigen Außenhaltern und Bohrstangen kombinieren. Für die sichere Montage sind Unterlage, Klemmsatz und Ersatzschrauben einzuplanen. Diese standardisierte Kompatibilität reduziert Rüstzeiten und vereinfacht die Ersatzteilverwaltung in Serienfertigungen erheblich. Lange Standzeit und produktive Zerspanung Die Sorte T6215 ist auf verschleißarme Bearbeitung ausgelegt und bietet in Kombination mit einem passenden Spanformer die Grundlage für produktive Zerspanung. Durch die optimierte Beschichtung reduziert sich der Verschleiß an der Schneidkante, sodass sich die Lebensdauer der Wendeschneidplatte verlängert und Werkzeugwechsel seltener erforderlich sind. Das steigert die Ausbringung und senkt die Stückkosten bei wiederkehrenden Losgrößen. Praktische Anwendungstipps für den Fertigungsalltag Für Außen- und Innendrehen empfiehlt sich der TSF-Spanbrecher je nach Werkstoff und Stabilität der Aufspannung. Der Eckenradius 0,8 mm liefert eine feine Oberflächengüte und ist besonders geeignet, wenn Maßhaltigkeit und Oberflächenbeschaffenheit im Fokus stehen. Achten Sie auf den angegebenen Freiwinkel 7° beim Halterabgleich; dieser beeinflusst Spanbildung und Schnittkräfte maßgeblich und sollte bei der Werkzeugauswahl berücksichtigt werden. Empfehlung: Für effizientes Drehen von rostfreien Stählen die VCMT110308-TSF mit der Sorte T6215 von Tungaloy einsetzen; bei Bedarf technische Beratung unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 anfragen Produktmerkmale Artikelnummer: 6951545 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT110308-TSF T6215 SKU Hersteller: TUN6951545 Material: Hartmetall Fakten Plattendicke: 3,18 mm Plattengröße: 11 mm Eckenradius: 0,8 mm Freiwinkel: 7° Winkel: 35° Besonderheiten CVD-beschichtet Mit Loch: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Spanbrecher: TSF Anwendung: Drehen Typische Einsatzgebiete: Außen- und Innendrehen FAQ Welche Werkstoffe sind für die VCMT110308-TSF geeignet? Die VCMT110308-TSF mit der Sorte T6215 ist speziell für das Drehen von rostfreiem Stahl ausgelegt; sie eignet sich auch für andere schwer zerspanbare Stähle, wenn Schnittwerte und Spanformer entsprechend gewählt werden. Wie beeinflusst der Eckenradius das Bearbeitungsergebnis? Der Eckenradius 0,8 mm reduziert lokale Schnittkräfte und verbessert die Oberflächengüte; kleinere Radien erhöhen hingegen das Risiko des Einlaufens bei instabiler Aufspannung. Welche Rolle spielt der Freiwinkel bei der Werkzeugauswahl? Der Freiwinkel 7° beeinflusst Spanabfuhr und Reibung an der Werkzeugschulter; beim Halterabgleich auf den angegebenen Freiwinkel achten, um optimale Spanbildung und längere Standzeit zu erreichen. Ist die VCMT110308-TSF mit Standardhaltern kompatibel? Ja, als ISO-genormte Drehwendeschneidplatte ist die VCMT110308-TSF auf Kompatibilität mit gängigen Außenhaltern ausgelegt, wobei Form, Größe und Befestigungsart zu prüfen sind. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 110308 T6215 Wendeplatten - Tungaloy
Optimise throughput with the CVD‑coated carbide grade T6215 and the precise 0.8 mm corner radius, guaranteeing stable performance on stainless steels with ISO‑compatible holders. Order the VCMT110308-PS T6215 directly via Metav Werkzeuge or ask our consultants if needed. VCMT110308-PS T6215 — ISO rhombic turning insert, CVD‑coated carbide, 0.8 mm radius (Tungaloy) The VCMT110308-PS T6215 is an ISO‑standard rhombic turning insert engineered for external and internal turning of stainless steels under stable to slightly interrupted cutting conditions. ISO rhombic insert, size 11 CVD‑coated carbide grade T6215 0.8 mm corner radius for precision 7° clearance; cylindrical hole + countersink Consistent fit and simplified tooling decisions for production The ISO‑standard form ensures predictable compatibility with a wide range of external holders and boring bars; compatibility is determined by shape, clearance angle, tolerance class, fastening, size and thickness. This standardisation reduces setup time and inventory complexity, delivering a measurable improvement in process reliability and throughput. The insert’s specification supports a straightforward selection process within a tool system, making it suitable for batch production or mixed‑series turning operations. Durable cutting performance for stainless steels The CVD‑coated carbide substrate identified as T6215 provides a wear‑resistant cutting edge tailored to the demands of stainless steels. Chemical vapour deposition (CVD) creates a hard, adherent coating that enhances oxidation resistance and edge stability at elevated temperatures. In practice, this means longer edge life under the moderate cutting forces typical of stable turning and fewer insert changes — a direct contribution to reduced downtime and lower tooling costs per component. Geometry engineered for surface quality and tool life A 0.8 mm corner radius combined with a 7° clearance angle and rhombic plate form delivers a balanced compromise between strength and finish. The larger corner radius supports serviceability during semi‑finishing, while the clearance angle helps prevent rubbing on the flank face. The insert thickness of 3.18 mm and the presence of a cylindrical hole with a one‑sided countersink (40°–60°) ensure robust clamping and repeatable seating, which together maintain consistent surface integrity across runs. System approach that supports shop productivity The insert is designed to form part of a complete system: ISO turning insert, matching external holder or boring bar, a supporting shim/clamp set and replacement screws. This modular approach enables targeted cost control — spare parts and consumables are standardised, and maintenance becomes a procedural task rather than an operational interruption. The included chipbreaker designation PS should be matched to workpiece material and machining stability to achieve predictable chip control and surface finish. Practical guidance for application and selection For turning applications where stability is good and interruptions are light, this grade and geometry are a practical choice for achieving a balance of tool life and surface quality. Compatibility checks should confirm holder form, free clearance, tolerance class and clamping method before production runs. Where cutting conditions vary significantly, selection of a different chipbreaker or grade may be warranted; technical consultation supports optimal parameter setting and tool pairing. Contact Metav Werkzeuge for tailored recommendations on integrating the Tungaloy VCMT110308-PS T6215 into existing tool systems or for procurement assistance; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Manufacturer article number: 6903153 SKU: 6903153-Tungaloy Manufacturer SKU: TUN6903153 Label: VCMT110308-PS T6215 Facts Corner radius: 0.8 mm Clearance angle: 7° Thickness: 3.18 mm Size: 11 Angle: 35° ISO code: 110308 Special features Series: ISO turning inserts Shape: rhombic Hole: cylindrical hole + one‑sided countersink (40°–60°) Grade: T6215 Chipbreaker: PS Substrate material: carbide Primary application: turning FAQ What materials is this insert suited for? The VCMT110308-PS T6215 is specified for stainless steels and performs well under stable to slightly interrupted turning conditions. How does the T6215 coating affect tool life? The CVD‑coated carbide grade T6215 increases oxidation resistance and edge stability, extending insert life compared with uncoated grades in stainless steel turning. Which holders are compatible with this insert? Compatibility depends on the holder’s form, free clearance, tolerance class, fastening method, size and thickness; the insert follows ISO conventions for rhombic turning plates. What role does the 0.8 mm corner radius play? A 0.8 mm corner radius improves edge strength for semi‑finishing and can enhance surface finish while providing a degree of robustness against minor interruptions. Is the insert supplied with clamping hardware? The insert is part of a system that typically includes holders, shims/clamping sets and replacement screws; check the specific tool assembly requirements before ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 110308 T9215 Wendeplatten - Tungaloy
VCMT 110308 T9215 – ISO-Drehwendeschneidplatten für Drehen (Tungaloy) Die VCMT 110308 T9215 ist eine ISO-genormte Drehwendeschneidplatte für das Drehen und ausgelegt auf produktive Bearbeitung von mittleren Stahlwerkstoffen. CVD-beschichtetes Hartmetall für hohe Standzeit Optimierter Spanbrecher TSF für kontrollierten Spanfluss Rhombische Form 11 mm für Außen- und Innendrehen Mit Loch und einseitiger Senkung für sichere Befestigung Eckenradius 0,8 mm für präzise Konturen Höhere Produktivität durch verschleißfestes Material Die Kombination aus CVD-beschichtetem Hartmetall und der Sorte T9215 sorgt für eine deutlich höhere Verschleißwiderstandsfähigkeit bei gleichzeitig guter Bruchsicherheit. Das bedeutet für die Fertigung geringere Nebenzeiten durch Plattenwechsel und stabilere Serienläufe. Anwender profitieren von kalkulierbareren Werkzeugkosten pro Teil und einer verbesserten Maschinenauslastung bei kontinuierlichem bis leicht unterbrochenem Schnitt. Passend für mittlere Stahlbearbeitung und vielseitige Aufgaben Für das Außen- und Innendrehen von mittelharten Stahlwerkstoffen ist diese Platte erste Wahl: die TSF-Spangeometrie führt Späne kontrolliert ab und reduziert Aufbauschneiden, was die Prozesssicherheit erhöht. Durch den Eckenradius von 0,8 mm lassen sich präzise Konturen herstellen, ohne die Standzeit unnötig zu opfern. Die Platte eignet sich besonders für Serienfertigung und Lohnbearbeitung, wo konstante Ergebnisse gefragt sind. Systemkompatibilität und Einbauhinweise Die Kompatibilität zum Halter wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt. Im Systemaufbau sind ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben erforderlich. Beim Einbau ist auf korrekte Unterlage und die vorgeschriebene Anzugsdrehmoment der Schraube zu achten, um die Stabilität der Schneidkante und die Formtreue zu gewährleisten. Technik verständlich erklärt: CVD und Spanbrecher Bei der CVD-Beschichtung (Chemical Vapor Deposition) entsteht eine harte Schicht, die Verschleiß reduziert und gleichzeitig die Schneidkante stützt. Der TSF-Spanbrecher ist so konstruiert, dass er Späne formt und bricht, wodurch die Spanabfuhr verbessert wird und empfindliche Maschinenkomponenten geschützt werden. Diese technische Kombination reduziert Nacharbeit und erhöht die Prozessstabilität. Für wen ist diese Platte geeignet? Werkstätten, Lohnfertiger und Serienproduzenten, die mittlere Stahlqualitäten zerspanen und Wert auf Prozesssicherheit sowie niedrige Stückkosten legen, finden in dieser Platte eine wirtschaftliche Lösung. Die VCMT 110308 T9215 ist ebenso für Anwender geeignet, die wiederholgenaue Ergebnisse und lange Standzeiten in stabilen Bearbeitungssituationen benötigen. Mit Blick auf hohe Standzeit und Prozesssicherheit empfiehlt Metav Werkzeuge die Verwendung der VCMT 110308 T9215 von Tungaloy für produktive Stahlzerspanung; für eine individuelle Schnittdatenempfehlung oder Materialprüfung kontaktieren Sie uns gern per eMail: info@metav-werkzeuge.com oder telefonisch: +49 2822 7131930. Produktmerkmale Artikelnummer: 6951541 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT110308-TSF T9215 SKU: TUN6951541 Fakten Eckenradius: 0,8 mm Plattendicke: 3,18 mm Plattengröße: 11 mm Winkel: 35° Freiwinkel: 7° Besonderheiten Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9215 (mittlere Stahlbearbeitung) Spanbrecher: TSF Form: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen FAQ Was macht die Sorte T9215 besonders geeignet für Stahl? Die Sorte T9215 kombiniert hohen Verschleißwiderstand mit Bruchsicherheit, weshalb die VCMT 110308 T9215 besonders für mittlere Stahlqualitäten geeignet ist; dies ermöglicht produktive Schnitte bei guter Werkzeugstandzeit. Ist die VCMT 110308 T9215 für unterbrochene Schnitte einsetzbar? Ja, die VCMT 110308-TSF T9215 ist für kontinuierliche bis leicht unterbrochene Schnitte ausgelegt; bei stark unterbrochenen Schnitten sollten spezifische geometrische Anpassungen geprüft werden. Welche Vorteile bietet der TSF-Spanbrecher in der Praxis? Der TSF-Spanbrecher sorgt für kontrollierten Spanfluss und reduziert Aufbauschneiden, wodurch die Oberflächengüte verbessert und die Werkzeugstandzeit verlängert wird. Wie beeinflusst der Eckenradius 0,8 mm die Bauteilgeometrie? Der Eckenradius von 0,8 mm erlaubt präzise Konturenschnitte mit guter Kantenstabilität und reduziert lokale Kerbwirkungen, was besonders bei Serienfertigung die Maßhaltigkeit unterstützt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com