VCMT 160408 AH6225 Wendeplatten - Tungaloy
VCMT 160408 AH6225 — ISO-Drehwendeschneidplatte für Drehen von Tungaloy Die VCMT 160408 AH6225 ist eine ISO-genormte Drehwendeschneidplatte, ausgelegt für das Außen- und Innendrehen von rostfreien Stählen und entwickelt für mittlere Schnittbedingungen und wechselnde Bearbeitungsanforderungen VCMT160408-TSF AH6225 von Tungaloy PVD-beschichtetes Hartmetall für rostfreie Stähle Rhombische Platte 16 mm, Dicke 4,76 mm Mit zylindrischem Loch und einseitiger Senkung TSF-Spanbrecher für stabile Spanbildung Hohe Prozesssicherheit und Wirtschaftlichkeit durch Materialwahl Die Kombination aus PVD-beschichtetem Hartmetall und der Sorte AH6225 sorgt für eine ausgewogene Balance zwischen Schnittfestigkeit und Standzeit. Das Material ermöglicht eine scharfe, zugleich stabile Schneidkante, die besonders bei rostfreien Stählen entscheidend für konstante Fertigungsergebnisse ist. Durch die optimierte Schneidstoffzusammensetzung reduziert sich der Werkzeugwechselaufwand, was die Produktivität im Fertigungsprozess erhöht und die Wirtschaftlichkeit verbessert. Anpassungsfähigkeit und präzise Einbaubedingungen Die VCMT160408-TSF ist ISO-genormt, wodurch die Kompatibilität zu Haltern über Form, Freiwinkel, Toleranzklasse, Befestigung und Plattegröße sichergestellt wird. Der Freiwinkel von 7° und der Winkel von 35° ermöglichen ein ausgewogenes Schnittverhalten, während das rhombische Plattenformat mit einem Eckenradius von 0,8 mm gezielte Feinbearbeitung erlaubt. Anwender profitieren von vorhersehbaren Einbaubedingungen und vereinfachter Ersatzteilverwaltung. Spanformer und Einsatzgebiet optimiert für wechselnde Bedingungen Der TSF-Spanbrecher wurde für stabile Spanbildung unter variierenden Schnittbedingungen konzipiert und reduziert die Gefahr von Spanverwicklungen. Bei Außen- und Innendrehoperationen an rostfreien Stählen bietet die Platte gleichbleibende Oberflächenqualität und Prozessstabilität. Anwender, die häufig zwischen unterschiedlichen Geometrien und Spannverhältnissen wechseln, erhalten so eine zuverlässige Lösung für serielle sowie variantenreiche Fertigungen. Einfache Handhabung, Lagerfähigkeit und Systemintegration Die Plattendicke von 4,76 mm, das zylindrische Loch mit einseitiger Senkung (40°–60°) sowie die ISO-Normung vereinfachen die Handhabung beim Wechsel und die Integration in bestehende Haltersysteme. Ersatzschrauben und Unterlagen sind Standardteile, wodurch Lagerhaltung und Prozesssicherheit steigen. Die robuste Auslegung unterstützt eine wiederholgenaue Performance auch unter industriellen Dauernutzungen. Empfehlung: Für prozesssichere Zerspanung die VCMT160408-TSF AH6225 von Tungaloy über Metav Werkzeuge anfragen; bei technischen Rückfragen eMail: info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6947740 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT160408-TSF Fakten Eckenradius: 0,8 mm Freiwinkel: 7° Winkel: 35° Plattendicke: 4,76 mm Plattengröße: 16 mm Besonderheiten Schneidstoff: PVD-beschichtetes Hartmetall (verschleißoptimiert) Sorte: AH6225 (universell für rostfreie Stähle) Spanbrecher: TSF (stabile Spanbildung) Plattenform: rhombisch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen FAQ Welche Werkstoffe eignet die Platte für? Die VCMT160408-TSF AH6225 von Tungaloy wurde speziell für die Bearbeitung von rostfreien Stählen entwickelt und bietet dabei eine gute Kombination aus Schneidkantenstabilität und Standzeit. Welcher Eckenradius ist verfügbar und was bedeutet das für die Oberfläche? Der Eckenradius beträgt 0,8 mm; ein kleinerer Radius ermöglicht feinere Konturen, während bei dieser Dimension eine gute Oberflächengüte bei mittleren Schnittwerten erzielt wird. Ist die Platte mit gängigen ISO-Haltern kompatibel? Ja, die ISO-Genormung der VCMT160408-TSF gewährleistet Kompatibilität zu Haltern, sofern Form, Freiwinkel, Toleranzklasse und Befestigung übereinstimmen. Welchen Nutzen hat die PVD-Beschichtung bei dieser Sorte? Die PVD-Beschichtung verbessert die Verschleißfestigkeit der PVD-beschichteten Hartmetallplatte und reduziert Anbackungen, wodurch die Standzeit bei der Bearbeitung rostfreier Stähle erhöht wird. Welche Rolle spielt der TSF-Spanbrecher in der Praxis? Der TSF-Spanbrecher sorgt für kontrollierte Spanformung unter wechselnden Schnittbedingungen und trägt somit zur Prozessstabilität und zur Reduktion von Maschinenstillständen bei. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 160408 AH6235 Wendeplatten - Tungaloy
VCMT160408 AH6235 ISO-Drehwendeschneidplatten zum Drehen — Tungaloy VCMT160408 AH6235 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen an rostfreien Stählen und für anspruchsvolle, unterbrochene Schnitte konzipiert PVD-beschichtetes Hartmetall AH6235 Optimierter PSS-Spanbrecher für Ausbruchschutz Rhombische Platte 16 mm, Radius 0,8 mm Mit zylindrischem Loch und einseitiger Senkung Passend für ISO-Drehhalter nach Norm Hohe Prozesssicherheit durch spezialisierte Sorte Die VCMT160408-PSS AH6235 verbindet eine zähere Hartmetallsorte mit einer PVD-Beschichtung, um bei der Bearbeitung von rostfreiem Stahl Ausbrüche zu reduzieren und die Standzeit zu erhöhen. Anwender profitieren von konstanter Schneidkante und stabiler Spanbildung auch bei unterbrochenen Schnitten. Die gezielte Kombination aus Legierung und Beschichtung sorgt für zuverlässige Ergebnisse bei variierenden Schnittbedingungen. Beschichtung und Werkstoffvorteile einfach erklärt Die PVD-Beschichtung bildet eine feine, haftfeste Schicht auf dem Grundwerkstoff und reduziert Reibung sowie Thermische Belastung. Dadurch bleibt die Schneidkante länger scharf und die Oberflächengüte der Bauteile verbessert sich. Für Betriebe bedeutet das weniger Werkzeugwechsel und bessere Oberflächen am Werkstück, besonders bei anspruchsvollen Materialien wie rostfreiem Stahl. Praxisnahe Anwendung und Kompatibilität Bei der Montierung entscheidet Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke über die Kompatibilität mit dem Halter. Diese Plattenform ist rhombisch mit einem Eckenradius 0,8 mm und einem Freiwinkel von 7°, wodurch sie sich für feine Schrupp- und Schlichtoperationen eignet. Anwender in Lohnfertigung und Inhouse-Produktion erreichen so eine stabile Bearbeitungsperformance bei Außen- und Innendrehen. Spanformer PSS und wirtschaftliche Effizienz Der PSS-Spanbrecher ist auf kontrollierte Spanbildung ausgelegt und minimiert Ausbrüche bei instabilen Schnittbedingungen. In Kombination mit der AH6235-Sorte ergibt sich eine gute Balance zwischen Zähigkeit und Verschleißfestigkeit. Das führt zu längeren Standzeiten und mehr produktiven Maschinenstunden, was die Gesamtkosten pro Detail senkt. Empfehlung: Für zuverlässige Zerspanung rostfreier Stähle die Tungaloy AH6235 Variante wählen und Produktanfragen direkt an Metav Werkzeuge richten per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6890228 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT160408-PSS AH6235 Hersteller SKU: TUN6890228 Plattenform: rhombisch Fakten Plattengröße: 16 mm Plattendicke: 4,76 mm Eckenradius: 0,8 mm Winkel: 35° Frei winkel: 7° Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall Sorte: AH6235 — zähere Sorte für rostfreie Stähle und unterbrochene Schnitte Spanbrecher: PSS — optimierter Spanformer für Ausbruchschutz Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) ISO-Bezeichnung: VCMT160408-PSS — ISO-genormte Ausführung FAQ Für welche Werkstoffe ist diese Platte besonders geeignet? Die VCMT160408-PSS AH6235 von Tungaloy ist speziell für die Bearbeitung von rostfreiem Stahl ausgelegt; die AH6235-Sorte bietet Zähigkeit für unterbrochene Schnitte und erhöhten Ausbruchschutz. Welche Vorteile bringt die PVD-Beschichtung bei dieser Wendeschneidplatte? Die PVD-Beschichtung auf der VCMT160408-PSS AH6235 reduziert Reibung, verringert thermischen Verschleiß und verlängert die Standzeit, was zu besserer Oberflächengüte und weniger Werkzeugwechsel führt. Ist die Platte mit Haltern für ISO-Platten kompatibel? Ja, die Platte entspricht der ISO-Bezeichnung VCMT160408-PSS; Kompatibilität zum Halter wird über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke sichergestellt. Wie wirkt sich der PSS-Spanbrecher in der Praxis aus? Der PSS-Spanbrecher der Tungaloy VCMT160408-PSS AH6235 kontrolliert die Spanform und reduziert Ausbrüche, besonders bei instabilen Schnittbedingungen oder unterbrochenen Schnitten. Welche Montagedaten sind bei Verwendung zu beachten? Beachten Sie Eckenradius 0,8 mm, Plattendicke 4,76 mm und den Frei winkel 7°; für sichere Befestigung ist das vorhandene zylindrische Loch mit einseitiger Senkung zu verwenden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 160408 AH6235 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH6235 for improved resistance in interrupted cuts and the 0.8 mm corner radius for fine contouring; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific holder matching. VCMT160408-PS AH6235 ISO turning insert — PVD-coated carbide, 0.8 mm corner radius (Tungaloy) The VCMT160408-PS AH6235 is an ISO-format turning insert designed for external and internal turning, optimised for interrupted cuts and demanding stainless steel applications PVD-coated carbide grade AH6235 0.8 mm corner radius for fine contours Cylindrical hole with 40°–60° countersink ISO rhomboid form VCMT160408-PS Consistent chip control and extended edge life for stainless steel turning The combination of a PVD-coated surface and the AH6235 carbide grade gives the insert a tougher cutting edge that copes well with work-hardened and corrosive materials such as stainless steel. For operations with frequent engagement and disengagement, the chipbreaker PS moderates chip formation, reducing the risk of edge fracture during interrupted cuts. The result is a measurable improvement in process reliability and longer interval between insert changes, which supports steady production and lowers tooling-related downtime. Geometry that guarantees stable clamping and repeatable results The ISO rhomboid geometry with a 0.8 mm corner radius and a 7° rake clearance ensures predictable contact conditions in the pocket — important for repeatability in serial turning. The insert is supplied with a cylindrical hole and a single-side countersink (40°–60°) to accommodate standard clamp designs; plate thickness is 4.76 mm, and the nominal size is 16 mm, matching ISO holder specifications. These defined dimensions simplify holder selection and minimise assembly time, allowing fast replacement without compromise to concentricity or rigidity. Easy integration into existing tooling systems and clear selection logic As part of a standard ISO insert system, this model fits typical external holders or boring bars when form, rake, tolerance class, fastening and thickness match. Choosing the correct chipbreaker and grade — as shown with AH6235 and PS — aligns cut stability with material demands, especially where breakout risk or interrupted machining is present. The clear specification of the insert simplifies inventory management and supports efficient machining strategies, delivering a convincing cost-benefit via longer life and stable surface finish. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy VCMT160408-PS AH6235 into existing toolholders and to request compatible shims and fastening screws Technical data Article number: 6890231 SKU: 6890231-Tungaloy Label: VCMT160408-PS AH6235 Model series: ISO-turning inserts Material: carbide Application: Turning Facts Size: 16 mm Corner radius: 0.8 mm Thickness: 4.76 mm Free angle (rake clearance): 7° Wedge/angle: 35° Countersink: 40°–60° Hole: with hole Special features PVD-coated carbide grade AH6235 Chipbreaker PS Rhomboid plate form (VCMT) Cylindrical hole with single-side countersink Suitable for interrupted cuts and stainless steel machining ISO-format for compatibility with standard holders System composition: ISO insert, appropriate outer holder or boring bar, shim/klemmset and replacement screws FAQ What materials is this insert best suited for? The VCMT160408-PS AH6235 is optimised for stainless steel and applications with interrupted cuts, thanks to the tougher AH6235 grade and PVD coating. How does the chipbreaker PS influence performance? The PS chipbreaker controls chip flow to reduce edge stress during interruptions, improving stability and lowering the risk of edge breakouts for this Tungaloy turning insert. Which holder features are required for correct compatibility? Compatibility depends on form, free angle, tolerance class, fastening method, size and thickness; ensure the holder matches the ISO VCMT160408 profile, 4.76 mm thickness and the cylindrical hole with countersink. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 AH725 Wendeplatten - Tungaloy
Benefit from the combination of the PVD-coated carbide AH725 for broad material coverage and the PSF chipbreaker for controlled chip formation; the insert’s 0.8 mm corner radius and 7° clearance support reliable external and internal turning. Order the VCMT160408-PSF AH725 directly via Metav Werkzeuge or ask our consultants if needed. VCMT 160408 AH725 — ISO turning insert for external and internal turning by Tungaloy The VCMT 160408 AH725 is an ISO-standard indexable turning insert designed for general-purpose turning; compatible holders should match form, clearance angle, tolerance class, clamping and thickness ISO turning insert VCMT160408-PSF PVD-coated carbide grade AH725 PSF chipbreaker for secure chip control 0.8 mm corner radius, 7° clearance Consistent process security with a universal turning grade The combination of a PVD-coated carbide substrate and the AH725 grade delivers consistent performance across a wide range of materials, specifically Stahl and rostfreier Stahl. This creates a clear benefit for mixed production runs: fewer tool changes and stable cutting behaviour. The PVD layer increases wear resistance while preserving cutting-edge geometry, which translates into predictable tool life and reduced scrap rates. The grade is optimised for applications requiring high process security and is suitable for smaller tools or setups where reproducibility matters. Controlled chips and improved surface finish The dedicated PSF chipbreaker promotes short, manageable chips in typical turning operations, reducing the likelihood of entanglement and secondary finishing work. Combined with the rhombic insert form and an included cylindrical hole with one-sided countersink (40°–60°) for reliable clamping, the system supports a steady chip flow and consistent contact between insert and workpiece. The 0.8 mm corner radius helps produce a good surface quality while the 7° clearance minimises rubbing, offering a practical balance between strength and finish in both external and internal turning. ISO compatibility for fast changes and lower setup risk The insert follows ISO dimensions and tolerances, so compatibility is governed by form, free angle, tolerance class, clamping style, size and thickness. That allows a predictable fit into standard external holders or boring bars when the matching holder geometry is selected. The systematic setup — indexable insert, suitable external holder or boring bar, shim/clamping kit and spare screws — reduces mounting errors and shortens changeover time. Clear specification of these parameters supports process planners in avoiding mismatches and downtime. Durable cutting edge with economical operation Thanks to the PVD coating and the AH725 formulation, the insert provides enhanced edge stability and wear resistance under conventional turning conditions. The result is a longer effective tool life and a favourable cost-per-cut calculation when compared to uncoated grades. For users prioritising reliability, the rounded corner and robust chip control reduce sudden edge failures, helping to maintain throughput and consistent part quality across shifts. Contact Metav Werkzeuge for tailored advice on holder compatibility and to arrange supply of the VCMT160408-PSF AH725; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6864923 SKU: 6864923-Tungaloy Manufacturer SKU: TUN6864923 Designation: VCMT160408-PSF AH725 Facts ISO code: 160408 Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 7° Wedge/approach angle: 35° Special features Grade: AH725 (PVD-coated carbide) Chipbreaker: PSF Shape: rhombic Hole style: with hole; cylindrical hole + one-sided countersink (40°–60°) Application: Turning (external and internal) Compatibility determined by form, free angle, tolerance class, clamping, size, thickness FAQ What materials is this insert suitable for? The VCMT160408-PSF AH725 insert is specified for machining Stahl and rostfreier Stahl and is developed as a universal, break-resistant grade for mixed-material production. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO dimensions (160408); compatibility depends on matching the holder’s form, free angle, tolerance class, clamping method, size and thickness. Which chipformer is fitted and what benefit does it provide? The insert uses the PSF chipbreaker, which promotes short, manageable chips and improves process security and surface quality in turning operations. What are the key dimensional data to check before ordering holders? Check the ISO code 160408, insert size 16 mm, thickness 4.76 mm, corner radius 0.8 mm and clearance angle 7° to ensure the correct holder choice. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH725 grade and ISO conformity for reliable, low-maintenance turning; the robust chip control and 0.8 mm corner radius support consistent surface finish and reduced downtime. Order the VCMT160408-PS AH725 directly via Metav Werkzeuge or ask the consultants for application support. VCMT160408-PS AH725 – ISO rhombic turning insert, PVD-coated carbide by Tungaloy VCMT160408-PS AH725 is a rhombic ISO turning insert for external and internal turning, featuring a PS chipbreaker and a cylindrical hole with single-sided countersink for secure clamping PVD-coated AH725 grade for reliable performance Universal use on steel and stainless steels ISO rhombic VCMT form with 0.8 mm radius Cylindrical hole with single-sided countersink Optimised cutting performance across varied materials The insert combines a PVD-coated surface with the AH725 carbide grade to deliver stable, predictable wear behaviour across mixed batches of steel and stainless steels. The PVD layer increases hardness at the cutting edge and reduces built-up edge formation, which translates into longer periods between index changes and lower total machining costs. Because the grade is designed to be breakout-resistant, it is particularly suitable for smaller tools and applications where high process reliability is required; the result is fewer interruptions and more consistent production output. ISO compatibility and secure clamping for faster tool changeovers The geometry follows ISO conventions so compatibility with holders is determined by form, clearance angle, tolerance class, fixation, size and thickness. The rhombic VCMT shape gives a 35° included angle together with a 7° clearance that matches standard tool seats; the insert measures 16 mm across the flats with a plate thickness of 4.76 mm. The centre has a cylindrical hole with a single-sided countersink (40°–60°) to ensure firm screw seating and repeatable clamping. Using an appropriate external holder or boring bar with the matching clamp set and replacement screws completes the system and simplifies inventory management for workshops. Practical machining advice for reliability and efficiency Chip control is provided by the chipbreaker PS, which supports consistent chip shape in general turning operations and eases chip handling. The modest 0.8 mm corner radius balances strength and surface finish, making the insert suitable for fine turning and light interrupted cuts where dimensional accuracy and surface quality are priorities. For unstable setups or long overhangs a reduced feed or a stiffer holder is recommended to maintain process stability. Selecting the correct chipbreaker and matching cutting parameters to material and rigidity will reduce tool wear and improve cycle times. For tailored application advice or to secure the Tungaloy VCMT160408-PS AH725, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss holders, clamping sets and machining strategies Technical data Article number: 6856695 SKU: 6856695-Tungaloy Manufacturer SKU: TUN6856695 Brand: Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 0.8 mm Included angle: 35° Clearance (relief) angle: 7° Plate thickness: 4.76 mm Plate size: 16 mm ISO designation: 160408 Special features PVD-coated carbide Grade AH725 (universal, breakout-resistant) Chipbreaker: PS Rhombic plate form (VCMT) Cylindrical hole with single-sided countersink (40°–60°) Application: turning (external and internal) System components: ISO insert, compatible external holder or boring bar, clamp set and screws Suitable for steel and stainless steels; recommended for applications requiring high process security FAQ What materials is this insert suitable for? The VCMT160408-PS AH725 from Tungaloy is designed primarily for steel and stainless steels, offering a universal, breakout-resistant grade suitable for mixed-material batches. How is the insert clamped and what is the hole style? Clamping uses the central cylindrical hole with a single-sided countersink (40°–60°) to ensure secure seating; select a matching clamp set and screw for repeatable clamping. What does the chipbreaker PS mean for machining? The PS chipbreaker provides controlled chip formation for general turning tasks, improving chip evacuation and contributing to stable, predictable cutting in medium-duty operations. Which dimensions determine holder compatibility? Holder compatibility is governed by the insert form (VCMT), the 35° included angle, the 7° clearance, plate size 16 mm and thickness 4.76 mm—these factors must match the chosen toolholder. What applications suit a 0.8 mm corner radius? A 0.8 mm corner radius is well suited to fine turning and light interrupted cuts where a balance between edge strength and surface finish is required; it supports dimensional accuracy with moderate cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 AH8005 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide grade AH8005, a PSS chipbreaker and a 0.8 mm corner radius for stable, repeatable turning results; order the VCMT160408-PSS AH8005 directly via Metav Werkzeuge or consult the team for application guidance. VCMT160408-PSS AH8005 — Rhombic ISO turning insert, PVD-coated carbide (Tungaloy) The VCMT160408-PSS AH8005 is an ISO-standard rhombic turning insert designed for external and internal turning of heat-resistant alloys and other hard materials; compatibility with the holder depends on form, clearance angle, tolerance class, fixing and plate thickness. PVD-coated carbide grade AH8005 PSS chipbreaker for controlled chips Rhombic ISO insert with 35° lead angle 0.8 mm corner radius for precision Countersunk hole fixing, 4.76 mm thick Stable cutting performance for demanding materials The PVD-coated carbide in grade AH8005 delivers a balanced combination of wear resistance and edge stability, specifically formulated for machining heat-resistant alloys and other tough materials under steady cutting conditions. The PSS chipbreaker promotes controlled chips, reducing risk of built-up edge and facilitating higher material removal rates in continuous operations. By choosing this specification, process planners gain improved tool life and fewer interruptions, which translates into more predictable cycle times and better utilisation of machine capacity. Precision geometry for repeatable accuracy The insert’s rhombic geometry with a 35° lead angle and a 0.8 mm corner radius provides a compromise between robust cutting edge and fine surface finish, making it suitable for both medium turning and light finishing passes. A plate thickness of 4.76 mm and the central fixing with a cylindrical hole plus one-sided countersink (40°–60°) ensure secure mounting and repeatable seating in standard ISO holders. This reliable clamping arrangement reduces vibration and positional variation, which supports consistent dimensional tolerances and surface quality across a production batch. Seamless system compatibility and application guidance As an ISO-series turning plate, the insert is intended to be used within a system comprising the appropriate external holder or boring bar, a backing/ clamping set and replacement screws; compatibility is determined by plate form, relief angle, tolerance class and fixing type. The PVD-coated carbide grade and the PSS chipformer should be selected according to workpiece material, machining strategy and available rigidity — when matched correctly, the result is economical machining with reproducible performance. For operations that demand stable cutting under thermal and mechanical stress, this insert provides a pragmatic balance of durability and process security. Contact Metav Werkzeuge for tailored cutting-data sheets or a recommendation for the ideal holder and cutting parameters for Tungaloy VCMT160408-PSS AH8005; Metav Werkzeuge’s consultants are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 6747796 SKU: 6747796-Tungaloy Manufacturer SKU: TUN6747796 Label: VCMT160408-PSS AH8005 Data Corner radius: 0.8 mm Plate size: 16 mm Plate thickness: 4.76 mm Lead angle: 35° Clearance (free) angle: 7° Manufacturer article number: 6747796 Special features PVD-coated carbide (AH8005) PSS chipbreaker Rhombic plate form, ISO 160408 Cylindrical hole with one-sided countersink 40°–60° Suitable for external and internal turning Model series: ISO turning inserts FAQ Which materials are best suited to this insert? The VCMT160408-PSS AH8005 insert uses a PVD-coated carbide grade AH8005 and is optimised for heat-resistant alloys and other hard materials when used in stable machining setups. What does the PSS chipbreaker provide? The PSS chipbreaker on this insert creates short, controllable chips under appropriate cutting conditions, improving chip evacuation and protecting the cutting edge during continuous turning operations. Which clamping arrangement is required for correct seating? This insert features a cylindrical hole with a one-sided countersink (40°–60°) and a 4.76 mm plate thickness; it is intended for standard ISO holders that match the 160408 geometry and the specified tolerance class. Can the insert be used for both roughing and finishing? With its 0.8 mm corner radius and 35° lead angle, the insert is suitable for medium turning and light finishing; selection of cutting data and feed must be adjusted to the required surface finish and dimensional tolerance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide wear resistance, precise rhombic geometry with a 0.8 mm corner radius, and ISO compatibility for straightforward integration into stable turning processes. Order the VCMT160408-PS AH8005 directly via Metav Werkzeuge or ask our consultants if needed. VCMT 160408 AH8005 ISO turning insert for turning — Tungaloy The VCMT160408-PS AH8005 is a rhombic ISO indexable insert engineered for stable external and internal turning of heat‑resistant alloys and other hard materials. ISO rhombic insert VCMT 160408, 16 mm PVD-coated carbide grade AH8005 Chipbreaker PS for controlled chip formation 0.8 mm corner radius and 7° relief Dependable performance for demanding turning The VCMT160408-PS AH8005 combines a PVD-coated carbide substrate with a wear‑resistant grade to deliver extended tool life under elevated temperatures. The coating improves wear resistance and thermal stability, which translates to longer intervals between indexings and fewer unplanned tool changes. For manufacturers aiming to keep cycle times consistent, the stable machining characteristics reduce variability and help maintain process reliability, especially when producing repeatable external contours or internal bores on tough alloys. Improved chip control and consistent surface quality Equipped with the chipbreaker PS, this insert promotes predictable chip formation and evacuation in continuous turning operations. Controlled chip breakage reduces the risk of entanglement, minimises rework, and supports a superior surface finish with less manual cleaning. In a production environment where handling time and machine uptime matter, the improved chip behaviour yields measurable efficiency gains and reduces secondary operations, supporting a more productive machining cycle. Simple integration with ISO tooling systems Designed to the ISO insert family, compatibility is determined by shape, relief angle, tolerance class, clamping and size. The ISO-standard rhombic form and the cylindrical hole with one‑sided countersink allow secure clamping in matching holders and boring bars. A correct clamping arrangement — insert, matching outer holder or boring bar, shim/clamping kit and appropriate screws — ensures repeatable seating and consistent cutting geometry. When replacing inserts, verify holder form and tolerance to preserve cutting accuracy and tool life. Application guidance and material suitability The AH8005 grade is formulated for productive machining of heat‑resistant alloys and harder workpiece materials under stable cutting conditions. Select the PS chipbreaker for continuous cuts where controlled swarf is essential; for interrupted cuts or unstable setups, adapt holder rigidity and cutting parameters accordingly. The 0.8 mm corner radius provides a compromise between edge strength and finish quality, making this insert suitable for finishing to semi‑finishing passes where dimensional control and consistent edges are required. For tailored selection advice on the Tungaloy VCMT160408-PS AH8005 and to secure genuine inserts from Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — consultants are available to assist with holder compatibility and batch supply Technical data Article number: 6747800 Manufacturer SKU: TUN6747800 SKU: 6747800-Tungaloy Brand: Tungaloy Model series: ISO turning inserts Product designation: VCMT160408-PS AH8005 Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Lead/approach angle: 35° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Chipbreaker: PS Grade/coating: AH8005, PVD-coated carbide Shape: rhombic Application: turning (external and internal) ISO-compatible insert for matching holders and boring bars FAQ What materials is this insert best suited for? The VCMT160408-PS AH8005 is optimised for heat‑resistant alloys and other hard materials; the AH8005 grade offers wear resistance suitable for sustained, stable turning operations. How is compatibility with a holder determined? Compatibility depends on insert form, relief angle, tolerance class, clamping method, size and thickness; the ISO-standard geometry of this insert allows use with matching ISO holders and boring bars when those parameters align. What benefit does the PS chipbreaker provide? The PS chipbreaker encourages controlled chip formation and efficient evacuation, improving operational safety, reducing chip-related interruptions and supporting a consistent surface finish. Which dimensions should be checked before fitting the insert? Verify the insert size (16 mm), thickness (4.76 mm), corner radius (0.8 mm), relief angle (7°) and the hole style (cylindrical with one‑sided countersink 40°–60°) to ensure correct seating and clamping. Is this insert suitable for roughing and finishing? With a 0.8 mm corner radius and the AH8005 grade, the insert is suited to finishing and light semi‑finishing under stable conditions; for heavy roughing select appropriate geometry and machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 AH8005 Wendeplatten - Tungaloy
Take advantage of a combination of high wear resistance, reliable chip control and ISO compatibility to keep turning operations productive and predictable; order the insert directly via Metav Werkzeuge or consult our specialists for toolholder matching and process optimisation. VCMT 160408 AH8005 – ISO turning insert, PVD‑coated carbide, PSF chipbreaker by Tungaloy VCMT 160408 AH8005 is an ISO‑standard rhombic turning insert designed for external and internal turning in stable setups, offering a wear‑resistant grade for heat‑resistant alloys and hard materials PVD‑coated carbide AH8005 for long life PSF chipbreaker for stable chip control Rhombic ISO insert 16 × 4.76 mm, 7° relief Centre hole with single‑side countersink 40°–60° Prolonged tool life through advanced coating and grade The PVD‑coated carbide grade AH8005 delivers improved wear resistance when machining heat‑resistant alloys and hardened workpieces. The coating stabilises the cutting edge at elevated temperatures, which reduces flank and crater wear; the resulting benefit is fewer indexings and longer periods between tool changes. For production environments where predictable tool life is essential, this combination supports consistent cycle times and reduced tooling costs. Predictable chip formation and safer machining Designed with a PSF chipbreaker, the insert produces controllable chip shapes under steady cutting conditions, minimising build‑up and preventing entanglement. Improved chip control lowers the risk of workpiece damage and facilitates safer automated turning. The practical outcome is a smoother workflow and less operator intervention during unattended or lights‑out shifts. ISO compatibility and secure clamping for stable cuts As an ISO‑normed part, the insert fits holders that match form, free angle, tolerance class, fastening method, size and thickness. The VCMT160408‑PSF geometry, with a centre hole and a cylindrical hole plus single‑side countersink (40°–60°), enables secure clamping and repeatable seat positioning. The standardised interface ensures quick tool changes and reduces setup variability across different machines and toolholders. Geometry tuned for finishing and medium‑cut tasks The rhombic shape with a r = 0.8 mm corner radius and 7° relief provides a balance between edge strength and surface quality, making the insert suitable for both finishing passes and medium stock removal in stable setups. The insert thickness of 4.76 mm and nominal size 16 mm contribute to mechanical rigidity, which helps maintain dimensional accuracy and surface integrity on turned components. Practical advantages for production workflows Incorporating this insert into a tooling system simplifies inventory and process planning: the standardised format supports interchangeability, while the AH8005 grade and PVD coating deliver consistent wear characteristics across batches. For shops seeking to reduce downtime and achieve repeatable results, the combination of grade, chipbreaker and standard geometry provides a pragmatic route to higher throughput and quality. For robust, wear‑resistant performance choose Tungaloy inserts such as VCMT 160408 AH8005 and contact Metav Werkzeuge for holder compatibility and application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support Technical data Article number: 6747792 SKU: 6747792-Tungaloy Manufacturer SKU: TUN6747792 Brand: Tungaloy Numbers / Core technical data Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 35° Manufacturer article number: 6747792 Designs / Special features PVD‑coated carbide Grade: AH8005 Chipbreaker: PSF Insert form: rhombic (VCMT) Hole style: centre hole with cylindrical hole + single‑side countersink (40°–60°) Model series: ISO turning inserts FAQ What materials is this insert suitable for? The VCMT 160408 AH8005 insert is specified for machining heat‑resistant alloys and hard materials; the AH8005 grade and PVD coating offer enhanced wear resistance for these applications. Is this insert compatible with existing ISO holders? Yes, the insert conforms to ISO dimensions; compatibility depends on matching form, free angle, tolerance class, fastening and size for the intended holder. How does the PSF chipbreaker affect machining? The PSF chipbreaker on this insert gives controlled chip formation during turning, improving chip evacuation and reducing the chance of chip entanglement in automated operations. Can the insert be used for both external and internal turning? The geometry and grade of the VCMT 160408 AH8005 permit use in both external and internal turning where a stable setup and proper holder support are available. Which features contribute most to repeatable surface finish? Repeatable finishes stem from the insert’s stable geometry (rhombic shape, r = 0.8 mm), consistent PVD coating performance and secure clamping via the centre hole and countersink. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 160408 AH8005 Wendeplatten - Tungaloy
Benefit from high wear resistance, stable chip control and a geometry that supports consistent surface finish; the combination of PVD-coated carbide and a rhombic VCMT profile ensures productive turning of heat‑resistant alloys and hard materials. Order the inserts directly via Metav Werkzeuge or contact our consultants for application advice. VCMT160408 AH8005 turning insert (rhombic, PVD‑coated carbide) by Tungaloy The VCMT160408 AH8005 is an ISO rhombic turning insert designed for external and internal turning, developed for stable machining of heat‑resistant alloys and other hard materials. PVD‑coated carbide grade AH8005 Rhombic VCMT 16×04 profile 0.8 mm corner radius Single‑sided chipbreaker Consistent performance with PVD‑coated carbide The PVD‑coated carbide composition (grade AH8005) offers a balanced combination of wear resistance and thermal stability, which translates into predictable tool life in demanding operations. For machining heat‑resistant alloys and other hard workpiece materials, this coating improves resistance to adhesion and temperature‑related flank wear, helping to maintain cutting edge integrity and reduce unscheduled tool changes. The result is steadier production runs and fewer interruptions. Geometry engineered for stability and surface quality The rhombic VCMT form with a 35° lead angle and a 0.8 mm corner radius provides a stable cutting edge and favourable force distribution, which reduces vibration under moderate to high‑rigidity setups. A single‑sided chipbreaker optimises chip formation for many interruption‑free turning tasks; when paired with the correct holder and clamping, this geometry helps to achieve improved surface finish and repeatable dimensional accuracy on turned components. Economic advantages through predictable tool behaviour Using a grade tuned for hard materials and high temperatures, operators gain predictable tool life and reduced scrap rates. Stable chip formation and consistent edge wear lower process variability, which supports higher productivity and a better cost per part over longer production cycles. For process planners, the combination of robust substrate and PVD coating reduces the frequency of insert changes and contributes to overall machining efficiency. Application guidance and system compatibility Intended for external and internal turning, the insert is ISO‑compatible and requires a matched clamping system: appropriate holder, shim and fastening screw. The design is with hole featuring a cylindrical hole plus a one‑sided countersink (40°–60°), which ensures reliable location and clamping in standard ISO toolholders. Choose the chipbreaker and the grade based on workpiece stability and material to exploit the insert’s strengths fully. For precise machining of heat‑resistant alloys, contact Metav Werkzeuge for application support or to request the Tungaloy VCMT160408 AH8005 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss tooling combinations and availability. Technical data Article number: 6747804 SKU: 6747804-Tungaloy Manufacturer SKU: TUN6747804 Designation: VCMT160408 AH8005 Material: Carbide Data Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 16 mm Relief angle: 7° Lead/angle: 35° ISO designation: 160408 Special features PVD‑coated carbide (grade AH8005) Rhombic VCMT form With hole: cylindrical hole + one‑sided countersink (40°–60°) Single‑sided chipbreaker Application: turning (external and internal) Compatibility: ISO turning holders Suited for heat‑resistant alloys and hard materials FAQ What materials is this insert suitable for? The VCMT160408 AH8005 insert is designed for heat‑resistant alloys and other hard materials; its PVD‑coated carbide composition provides thermal and wear resistance for such applications. Which toolholders are compatible with the VCMT160408 AH8005? Compatibility follows ISO turning insert standards; the insert requires a matched rhombic VCMT holder with appropriate shim and screw for secure clamping of the VCMT160408 AH8005. How does the 0.8 mm corner radius affect cutting results? A 0.8 mm corner radius increases edge strength compared with smaller radii, improving resistance to chipping and enabling slightly heavier cuts while also contributing to consistent surface finish. What does the hole and countersink configuration mean for clamping? The cylindrical hole with one‑sided countersink (40°–60°) ensures precise locate and stable clamping in standard ISO toolholders, reducing the risk of insert rotation or movement under load. Is the AH8005 grade coated and what benefit does that bring? Yes; AH8005 is a PVD‑coated carbide grade offering improved wear and thermal resistance, which helps maintain edge integrity during machining of demanding alloys. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 160408 AH8015 Wendeplatten - Tungaloy
Reliable PVD-coated AH8015 carbide and a 0.8 mm corner radius deliver stable cutting performance and consistent chip control for turning operations; order directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. VCMT160408-PS AH8015 — ISO turning insert (rhombic, 16 mm) by Tungaloy The VCMT160408-PS AH8015 is a rhombic ISO turning insert designed for external and internal turning of heat-resistant alloys, combining a balanced PVD-coated carbide substrate with a chipbreaker optimised for stable chip formation. PVD-coated AH8015 grade for heat-resistant alloys Compatible with ISO holders, rhombic 16 mm size 0.8 mm corner radius for accurate profiling Cylindrical hole with single-sided countersink (40°–60°) Higher productivity through balanced cutting performance The combination of a PVD-coated surface and the AH8015 carbide grade provides a deliberate balance between wear resistance and edge stability, making this insert well suited for machining heat-resistant and alloyed materials. The coating reduces adhesion and improves surface durability during elevated cutting temperatures, which lowers the frequency of tool changes and increases uptime. With a chipbreaker PS, the design actively supports controlled chip formation, reducing the risk of entanglement and improving process reliability in both roughing and finishing passes. Predictable positioning and secure clamping for consistent accuracy Conformity to ISO dimensions ensures predictable compatibility with standard clamping systems; the insert’s rhombic form and the cylindrical hole with a single-sided countersink provide repeatable seating and secure fixation. Key dimensional data such as the 16 mm plate size and 4.76 mm plate thickness combine with a 7° clearance angle and a 35° cutting angle to produce a stable tool geometry that supports accurate profile turning and reliable tool life. The 0.8 mm corner radius allows precise profile generation while maintaining sufficient edge strength for interrupted cuts and varying feed rates. Practical system approach and efficient workshop handling The insert forms part of an ISO-indexable system comprising a matching external holder or boring bar, support shim and clamping set, plus replacement screws. The standardised format simplifies tool management in busy production environments and reduces setup time when changing inserts. Made from carbide and finished with a PVD layer, this grade is a first choice for general machining of heat-resistant alloys where a compromise of life and toughness is required. Toolrooms and production shops benefit from reduced downtime and consistent surface quality when tooling is selected to match material and stability conditions. For application advice or to secure supply of this Tungaloy insert, contact Metav Werkzeuge directly — our specialists will recommend suitable holders and clamping sets to match the VCMT160408-PS AH8015 and specific machining requirements. Email: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Manufacturer article number: 6747801 SKU: 6747801-Tungaloy Model series: ISO turning inserts Label: VCMT160408-PS AH8015 Core data Corner radius: 0.8 mm Plate size: 16 mm Plate thickness: 4.76 mm Clearance angle: 7° Cutting/approach angle: 35° Hole: cylindrical with single-sided countersink (40°–60°) Special features Rhombic insert shape PVD-coated carbide, grade AH8015 Chipbreaker type PS ISO-standardised indexable insert for turning Suitable for external and internal turning Compatible with ISO holders and boring bars FAQ What materials is this insert suitable for? The VCMT160408-PS AH8015 is optimised for heat-resistant and alloyed materials; the PVD-coated AH8015 grade offers balanced wear resistance and edge stability for such applications. Which toolholders fit this insert? ISO-standard indexable holders and boring bars matching the rhombic form, 16 mm size and the specified thickness are compatible; correct holder choice depends on form, clearance, tolerance and clamping method. How does the chipbreaker affect machining? The PS chipbreaker promotes stable chip formation, reducing chip length and improving evacuation during both roughing and finishing, which supports continuous production with fewer interruptions. Can this insert be used for interrupted cuts? Yes — the combination of carbide substrate and AH8015 grade provides sufficient edge strength for many interrupted turning operations, provided appropriate feeds and stability are maintained. What dimensions ensure correct clamping and repeatability? Repeatable positioning is supported by the ISO-format dimensions: 16 mm plate size, 4.76 mm thickness, 0.8 mm corner radius and the cylindrical hole with countersink for secure fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 AH8015 Wendeplatten - Tungaloy
VCMT 160408 AH8015 ISO-Drehwendeschneidplatte zum Drehen – Tungaloy Die VCMT160408 AH8015 ist eine ISO-genormte rhombische Drehwendeschneidplatte aus PVD-beschichtetem Hartmetall, entwickelt für das Außen- und Innendrehen hitzebeständiger Legierungen. PVD-Beschichtung: hohe Verschleißfestigkeit Für hitzebeständige Legierungen optimiert Einseitiger Spanbrecher für stabile Spanbildung Rhombische Form, 35° Spitzenwinkel Mit zylindrischem Loch und Senkung 40°–60° Höhere Standzeit durch ausgewogene Schneidstoffzusammensetzung Die VCMT160408 AH8015 kombiniert PVD-beschichtetes Hartmetall mit einer ausgewogenen Balance aus Verschleißfestigkeit und Schneidkantenstabilität. Dadurch reduziert sich der Werkzeugwechselaufwand, was die Produktivität in der Fertigung erhöht. Die Sorte AH8015 ist speziell für hitzeempfindliche Legierungen ausgelegt und bietet konstante Performance auch bei anspruchsvollen Schnittbedingungen. Sicherer Sitz und einfache Austauschbarkeit im Halter Dank der rhombischen Form, des zylindrischen Lochs mit einseitiger Senkung und der ISO-Norm ist die Platte schnell und sicher im passenden Halter montiert. Die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab; diese Parameter erleichtern die Auswahl des richtigen Halters und minimieren Einstellzeiten. Präzise Spanbildung für gleichmäßige Oberflächenqualität Der einseitige Spanbrecher sorgt für kontrollierte Spanabfuhr und stabilisierte Spanbildung, was zu reproduzierbaren Bearbeitungsergebnissen führt. Für Anwender bedeutet das: weniger Nacharbeit und bessere Oberflächen ohne übermäßigen Verschleiß der Schneidekante. Diese Platte eignet sich sowohl für Schrupp- als auch für Schlichtaufgaben bei geeigneter Schnittwertwahl. Auswahlhinweise und einfache Begriffserklärung Für die richtige Einordnung sollte der Freiwinkel 7° und der Spitzenwinkel 35° beachtet werden; der Freiwinkel beeinflusst die Schnittkräfte und die Wärmeentwicklung. PVD (Physical Vapor Deposition) ist ein Dünnschichtverfahren, das die Verschleißfestigkeit der Platte deutlich erhöht. Wählen Sie Spanbrecher und Sorte passend zum Werkstoff und zur Bearbeitungsart, um die Leistung der Platte optimal zu nutzen. Empfehlung: Für produktive Zerspanung auf Tungaloy-Qualität setzen und die VCMT160408 AH8015 über Metav Werkzeuge anfragen — bei Fragen: 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 Produktmerkmale Artikelnummer: 6747805 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT160408 AH8015 Hersteller-SKU: TUN6747805 Daten Eckenradius: 0,8 mm Spitzenwinkel: 35° Freiwinkel: 7° Plattendicke: 4,76 mm Plattengröße: 16 mm Besonderheiten Material: Hartmetall Beschichtung: PVD-beschichtet Spanbrecher: einseitig Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen FAQ Welche Werkstoffe lassen sich mit der VCMT160408 AH8015 bearbeiten? Die VCMT160408 AH8015 von Tungaloy ist speziell für hitzebeständige Legierungen ausgelegt und eignet sich daher für anspruchsvolle Stahl- und Legierungswerkstoffe bei Drehbearbeitung. Wie beeinflusst der Eckenradius von 0,8 mm die Bearbeitung? Ein Eckenradius von 0,8 mm bietet einen guten Kompromiss zwischen Stabilität der Schneidekante und Oberflächenqualität; die VCMT160408 AH8015 erreicht so zuverlässige Ergebnisse bei moderaten Schnittparametern. Welche Rolle spielt die PVD-Beschichtung bei dieser Wendeplatte? Die PVD-Beschichtung erhöht die Verschleißfestigkeit und schützt die Schneidkante gegen thermischen und mechanischen Verschleiß, was zu längeren Standzeiten der VCMT160408 AH8015 führt. Welche Halter sind kompatibel mit dieser Platte? ISO-genormte Halter für rhombische Platten mit passender Form, Freiwinkel und Befestigung sind kompatibel; die Kompatibilität hängt von Form, Größe, Dicke und Toleranzklasse ab. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 160408 AH8015 Wendeplatten - Tungaloy
Take advantage of a proven combination of PVD‑coated carbide performance and a balanced edge stability/wear resistance profile to maintain productive turning of heat‑resistant alloys; compatibility with ISO holders is assured by the rhombic geometry and standard fixing features — order tooling advice through Metav Werkzeuge if required. VCMT 160408 AH8015 – ISO turning insert for heat‑resistant alloys, PVD‑coated carbide, 35° rhombic VCMT 160408 AH8015 is an ISO‑standard indexable insert developed for general turning applications, offering a PVD‑coated carbide grade tailored to machining heat‑resistant alloys in both external and internal turning. PVD‑coated carbide grade AH8015 Balanced wear resistance and edge stability Rhombic 35° geometry for ISO holders 0.8 mm corner radius with centring hole Reliable cutting performance for hard‑to‑machine alloys The insert is produced in a PVD‑coated carbide grade (AH8015) designed as a first choice for the general machining of heat‑resistant alloys. This coating and substrate combination delivers a compromise between wear resistance and edge stability, which translates into longer useful tool life and fewer interruptions for insert changes. The result is improved process uptime and consistent component quality when facing elevated temperatures and abrasive chip conditions. Geometry and holder compatibility that simplify tooling decisions Featuring a rhombic geometry with a 35° cutting angle and a 0.8 mm corner radius, the insert supports fine finishing and medium‑duty roughing where a small nose radius is required. The plate conforms to ISO standard dimensions and uses a cylindrical hole with one‑sided countersink (40°–60°) for secure clamping. Key dimensions such as size 16 mm, thickness 4.76 mm and the 7° relief angle determine the correct mating with standard holders; compatibility depends on form, clearance angle, tolerance class, fastening and thickness, which helps users match the right holder quickly and reliably. Practical application and process benefits in the workshop Equipped with a PSS chipbreaker, the insert is suitable for both external and internal turning where controlled chip formation is essential. Selecting the correct chipbreaker and grade based on workpiece material and machine stability reduces rework and improves cycle time. The concise geometry and robust substrate make the insert a practical option for job shops and production cells seeking repeatable results and straightforward inventory management — technical advisers can recommend the ideal holder and cutting data for specific setups. Contact Metav Werkzeuge for tailored tooling recommendations on the Tungaloy VCMT160408‑PSS AH8015 insert and to verify holder compatibility; eMail: info@metav-werkzeuge.com – Tel: +49 2822 7131930 Technical data Manufacturer article number: 6747797 SKU: 6747797‑Tungaloy Manufacturer SKU: TUN6747797 Designation: VCMT160408‑PSS AH8015 Model series: ISO‑Drehwendeschneidplatten Material: Carbide Dimensions & key values Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Insert angle: 35° Features & compatibility Rhombic plate form Cylindrical hole with one‑sided countersink (40°–60°) PSS chipbreaker PVD‑coated carbide grade AH8015 Compatible with ISO turning holders (form, clearance, tolerance class, fastening, size and thickness determine compatibility) FAQ What materials is this insert intended for? The VCMT 160408 AH8015 insert is designed primarily for heat‑resistant alloys, with the AH8015 PVD‑coated carbide offering a balanced performance for elevated temperature machining. Which chipbreaker is fitted and what is its purpose? This specification uses the PSS chipbreaker, which is tuned to promote stable chip formation during turning and to reduce the risk of long, entangling chips in both external and internal operations. How does the geometry affect machining performance? The rhombic 35° geometry combined with a 0.8 mm corner radius reduces cutting forces and improves surface finish potential; these features are particularly beneficial when precision and repeatability are required. What should be checked for holder compatibility? Compatibility is determined by the insert form, clearance (relief) angle, tolerance class, fastening and both size and thickness; check that the holder matches these parameters to ensure secure clamping and correct tool orientation. Is this insert suitable for finishing operations? Yes, with its small corner radius and stable edge characteristics, the insert can be used for finishing, provided the cutting data and machine stability are adapted accordingly. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 160408 AH8015 Wendeplatten - Tungaloy
Benefit from the balanced wear resistance and reliable edge stability of the VCMT160408-TM AH8015 combined with ISO compatibility for straightforward tool integration; order the inserts via Metav Werkzeuge or consult our specialists for application-specific selection. VCMT160408-TM AH8015 – ISO rhombic turning insert, PVD-coated carbide, 7° relief by Tungaloy A VCMT160408-TM AH8015 indexable turning insert designed for general turning of heat-resistant alloys and stable, repeatable machining operations ISO rhombic turning insert VCMT profile PVD-coated carbide grade AH8015 Edge radius 0.8 mm for versatile turning 7° relief angle with centrally bored insert Higher productivity through balanced wear and edge stability The insert's PVD-coated carbide substrate in grade AH8015 offers a deliberately balanced combination of wear resistance and edge stability, which translates into consistent part quality during extended runs. As an ISO-conforming rhombic insert, its form and tolerance class allow predictable interfacing with standard holders; this reduces setup time and stabilises cycle times. By choosing a geometry with an edge radius 0.8 mm and a TM chipbreaker, single-pass capability and surface integrity are optimised for many turning tasks, especially where heat-resistant alloys demand controlled cutting conditions. Reliable chip control and secure mounting for continuous operation The TM chipbreaker is designed for predictable chip formation in interrupted and continuous turning, improving evacuation and reducing rework. The insert's centrally bored design with a cylindrical hole and one-sided countersink (40°–60°) ensures secure clamping and reproducible seat positioning in the toolholder. Combined with the 7° relief angle, the insert maintains a stable cutting edge under varying radial engagement, which helps to lower the risk of edge chipping and unplanned downtime in production environments that prioritise process reliability. Practical selection and application advice for workshops This rhombic, ISO-spec insert with a nominal size of 16 mm and a 4.76 mm thickness is a versatile choice for external and internal turning where a compromise between tool life and edge strength is required. The PVD coating reduces adhesive wear on heat-prone materials, making the grade AH8015 a first choice for machining heat-resistant alloys. When integrating the insert, match form, relief angle, tolerance class and thickness to the holder specification; selecting the appropriate chipbreaker and clearance conditions will maximise tool life and surface finish while simplifying inventory management. For application support or to arrange a supply of Tungaloy VCMT160408-TM AH8015 inserts, contact Metav Werkzeuge for tailored advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6825804 Manufacturer SKU: TUN6825804 SKU: 6825804-Tungaloy Model series: ISO turning inserts Designation: VCMT160408-TM AH8015 Facts ISO code: 160408 Insert size: 16 mm Thickness: 4.76 mm Relief angle: 7° Corner radius: 0.8 mm Hole: cylindrical hole with single-sided countersink (40°–60°) Special features Material: carbide (cemented carbide) Grade/coating: AH8015, PVD-coated Chipbreaker: TM Plate form: rhombic Typical application: external and internal turning of heat-resistant alloys FAQ What materials is this insert suitable for? The VCMT160408-TM AH8015 insert is optimised for machining heat-resistant alloys; the AH8015 grade provides a balance of wear resistance and edge strength for these materials. How does the TM chipbreaker influence machining? The TM chipbreaker on this insert promotes controlled chip formation and evacuation, helping to maintain surface finish and prevent chip entanglement in turning operations. Which toolholders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the insert's ISO rhombic profile and cylindrical bore with countersink allow use with standard ISO holders designed for VCMT-type plates. What are the key dimensions to check when replacing an insert? Verify the ISO code (160408), insert size (16 mm), thickness (4.76 mm), relief angle (7°) and corner radius (0.8 mm) to ensure a proper fit and cutting geometry match. Is the insert suitable for internal as well as external turning? Yes, the rhombic geometry and balanced AH8015 grade make this insert suitable for both external and internal turning tasks when installed in a compatible holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 AH8015 Wendeplatten - Tungaloy
Combine the PVD‑coated AH8015 grade with the PSF chipbreaker and a robust 0.8 mm corner radius for reliable machining of heat‑resistant alloys; order the VCMT160408‑PSF AH8015 directly via Metav Werkzeuge or ask our consultants if needed. VCMT 160408 AH8015 – Rhombic ISO turning insert for external and internal turning, Tungaloy The VCMT160408‑PSF AH8015 is an ISO‑standard rhombic turning insert designed for external and internal turning of heat‑resistant alloys, offering a balance between wear resistance and edge stability. ISO rhombic insert, 35° geometry PVD‑coated AH8015 grade PSF chipbreaker for heat‑resistant alloys 0.8 mm corner radius for edge strength Cylindrical hole with single‑side countersink Consistent performance on heat‑resistant alloys through balanced grade selection The combination of a PVD‑coated AH8015 carbide grade and a carefully engineered chipbreaker provides a dependable compromise between wear resistance and edge stability. For turning operations on elevated‑temperature alloys, this balance reduces unexpected tool changes and helps maintain component tolerances over longer runs. The coating improves thermal resistance and abrasion performance, which translates into steadier machining and more predictable tool life when compared with uncoated grades. Predictable chip formation and stronger cutting edge for stable cuts The PSF chipbreaker and rhombic geometry support controlled chip formation across typical turning tasks. The 0.8 mm corner radius increases edge strength for interrupted cuts and batch production, while the 35° lead angle promotes smooth engagement and efficient cutting forces. Together these features reduce the risk of edge chipping and vibration, enabling more consistent surface finish and dimensional accuracy in both light and medium‑duty turning operations. Easy integration into ISO tooling systems and secure clamping As an ISO‑standard insert with a 4.76 mm thickness and a cylindrical hole with single‑side countersink (40°–60°), the insert integrates with a wide range of external holders and boring bars. Compatibility depends on form, relief angle, tolerance class, fastening type, size and thickness; matching the insert to the correct holder ensures optimal clamping and heat dissipation. The standardised format simplifies stocking and replacement, reducing machine downtime and logistical complexity on the shop floor. System approach: choose chipbreaker and holder for the application This insert is intended to be used as part of a system comprising the insert, a suitable external holder or boring bar, backing shim/clamping set and replacement screws. Selecting the correct chipbreaker and grade for the workpiece material and stability conditions is crucial for achieving the best balance of productivity and tool life. For operations where stable cutting and predictable tool wear are priorities, the combination of the PSF geometry and the AH8015 grade offers a practical solution that supports continuous production. Contact Metav Werkzeuge for application‑specific recommendations and availability of Tungaloy VCMT inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6747793 Manufacturer SKU: TUN6747793 Manufacturer: Tungaloy Label: VCMT160408-PSF AH8015 Key measurements Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Lead angle: 35° Clearance angle: 7° Features & applications PVD‑coated carbide AH8015 PSF chipbreaker Rhombic shape Cylindrical hole + single‑side countersink 40°–60° ISO‑standard turning insert Application: external and internal turning FAQ What materials is this insert best suited for? The VCMT160408‑PSF AH8015 from Tungaloy is designed as a first‑choice grade for machining heat‑resistant alloys, offering a balance between wear resistance and edge stability. Which chipbreaker should be chosen for interrupted cuts? The PSF chipbreaker integrated in this insert is suitable for many turning tasks, including interrupted cuts, when paired with appropriate machining parameters and stable clamping. How is the insert secured in the holder? The insert features a cylindrical hole with a single‑side countersink (40°–60°) and is clamped in compatible ISO holders; correct holder geometry and tolerance class ensure reliable fixation. Can this insert be used for internal turning? Yes, the ISO‑standard format and rhombic geometry make the insert suitable for both external and internal turning when installed in an appropriate boring bar or holder. What are the key dimensions to check when ordering replacements? Verify the insert size (16 mm), thickness (4.76 mm), corner radius (0.8 mm), and ISO designation (160408) to ensure compatibility with existing holders and machines. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 160408 AH905 Wendeplatten - Tungaloy
VCMT 160408 AH905 ISO-Drehwendeschneidplatte für Drehen (Tungaloy) VCMT 160408 AH905 bietet verschleiß- und ausbruchfeste Performance für präzise Dreharbeiten bei hoher Prozesssicherheit. PVD-beschichtetes Hartmetall mit AH905-Sorte Rhombische Platte 16 mm, Eckenradius 0,8 mm Freiwinkel 7° für stabile Schneidkante Mit zylindrischem Loch und einseitiger Senkung Passend für Außen- und Innendrehen Prozesssichere Performance dank PVD-beschichtung und AH905 Die AH905-Sorte ist ein PVD-beschichtetes Hartmetall, das speziell für verschleiß- und ausbruchfeste Drehanwendungen entwickelt wurde. Durch die Kombination aus scharfer Schneidkante und robuster Beschichtung bleibt die Standzeit stabil, was Maschinenausfallzeiten reduziert. Anwender profitieren von gleichbleibender Oberflächengüte und reproduzierbaren Ergebnissen, wenn eine konstante Werkstückqualität gefragt ist. Geometrie und Spanformer für effiziente Bearbeitung Die rhombische Plattenform mit der Größe 16 mm und einem Eckenradius von 0,8 mm ermöglicht vielseitige Einstiche und Konturarbeiten. Der Freiwinkel 7° und der Plattenwinkel von 35° sind so ausgelegt, dass sie eine sichere Einspannlage und optimierte Spanabfuhr ermöglichen. Durch die ISO-Normierung lässt sich die Wendeschneidplatte einfach mit passenden Außenhaltern, Unterlagen und Klemmsätzen kombinieren, was Rüstzeit und Einrichtaufwand reduziert. Einsatzbereiche, Materialwahl und Anwenderprofil Die Wendeschneidplatte eignet sich für Außen- und Innendrehen; Spanbrecher und Sorte sind entsprechend Werkstoff und Stabilitätsanforderung zu wählen. Die VCMT 160408 AH905 ist vor allem für industrielle Fertigung, Lohnbearbeitung und anspruchsvolle Werkstätten interessant, die auf prozesssichere, wirtschaftliche Zerspanung Wert legen. Für jede Anwendung empfiehlt sich die Auswahl des passenden Spanbrechers PSF und die Abstimmung auf Haltergeometrie und Schnittdaten. Systemaufbau, Kompatibilität und wirtschaftlicher Nutzen Das System besteht aus ISO-Drehplatte, dem passenden Außenhalter oder der Bohrstange sowie Unterlage, Klemmsatz und Ersatzschrauben. Die Kompatibilität wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt. Durch die robuste Sorte lassen sich Standzeiten verlängern und Werkzeugkosten pro Bauteil reduzieren, was die Gesamtkosten in der Fertigung spürbar senkt. Empfehlung: Die Tungaloy VCMT 160408 AH905 als zuverlässige Lösung für prozesssichere Dreharbeiten über Metav Werkzeuge beziehen; bei Fragen technische Beratung unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 anfragen Produktmerkmale Bezeichnung: VCMT VCMT160408-PSF Artikelnummer: 6879336 Hersteller: Tungaloy Modellserie: ISO-Drehwendeschneidplatten SKU Hersteller: TUN6879336 SKU: 6879336-Tungaloy Fakten Winkel: 35° Eckenradius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 16 mm Freiwinkel: 7° Herstellerartikelnummer: 6879336 Besonderheiten Material: Hartmetall Beschichtung: PVD-beschichtet Sorte: AH905 Spanbrecher: PSF Platte: VCMT160408-PSF Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Drehen Schneidstofftyp: PVD-beschichtetes Hartmetall Systemaufbau: ISO-Drehplatte, Außenhalter/Bohrstange, Unterlage/Klemmsatz, Ersatzschrauben FAQ Welche Vorteile bietet die AH905-Sorte gegenüber Standard-Hartmetall? Die AH905-Sorte von Tungaloy kombiniert eine PVD-Beschichtung mit verschleißfester Substanz, wodurch die Standzeit steigt und die Schneidkante stabil bleibt; das reduziert Werkzeugwechsel und Nacharbeit. Ist die VCMT 160408 AH905 mit Standard-ISO-Haltern kompatibel? Ja, die Platte ist ISO-genormt; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab; passende Unterlage und Schrauben verwenden. Für welche Bearbeitungsarten ist die Wendeplatte besonders geeignet? Die Platte ist für Außen- und Innendrehen vorgesehen und empfiehlt sich bei Anwendungen, die eine scharfe Schneidkante und hohe Prozesssicherheit erfordern. Welchen Einfluss hat der Eckenradius 0,8 mm auf die Bearbeitung? Ein Eckenradius von 0,8 mm sorgt für stabile Schnittbedingungen bei Kontur- und Einsticharbeiten und trägt zu gleichmäßigem Spanverhalten und guter Oberflächengüte bei. Wie beeinflusst das zylindrische Loch mit Senkung die Montage? Das zylindrische Loch mit einseitiger Senkung (40°–60°) gewährleistet sichere Befestigung und einfache Wiederholgenauigkeit beim Wechsel der Wendeschneidplatte. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 160408 AH905 Wendeplatten - Tungaloy
VCMT 160408 AH905 ISO-Drehwendeschneidplatte zum Drehen – Tungaloy VCMT 160408 AH905 ist eine ISO-genormte Drehwendeschneidplatte für prozesssicheres Außen- und Innendrehen Hohe Prozesssicherheit durch PVD-Beschichtung Verschleißfeste Schneidkante für lange Standzeiten Rhombische Form für vielseitige Einsatzmöglichkeiten PS-Spanbrecher für zuverlässige Spanbildung Kompatibel mit ISO-Außenhaltern und Bohrstangen Prozesssichere Zerspanung für stabile Fertigungsabläufe Die Wendeschneidplatte aus PVD-beschichtetem Hartmetall liefert konstant stabile Schneidkanten und hohe Prozesssicherheit. Durch die Kombination aus scharfer Geometrie und der Sorte AH905 reduziert sich das Risiko von Ausbrüchen, was Rüstaufwand und Maschinenstillstand minimiert. Anwender profitieren direkt von gleichmäßiger Werkstückqualität und planbaren Standzeiten bei Serienfertigung. Materialeigenschaften und Nutzen für die Bearbeitung Die PVD-Beschichtung sorgt für verbesserte Verschleißfestigkeit und Wärmebeständigkeit, sodass die Platte auch bei höheren Schnittbedingungen länger Leistung bringt. PVD bedeutet, dass die Beschichtung in einem physikalischen Verfahren aufgetragen wird, was Dünnschichthaftung und Oberflächenhärte erhöht. Der daraus resultierende Vorteil ist eine reduzierte Kosten pro Werkstück durch verlängerte Werkzeuglaufzeiten. Anwendungskompatibilität und Auswahlhinweise Für optimale Ergebnisse ist die Auswahl des passenden Halters, Freiwinkels und Spanbrechers entscheidend; die Kompatibilität wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt. Die rhombische Form und das PS-Spanbrechersystem eignen sich besonders für vielseitige Außen- und Innendrehaufgaben. Kunden, die Unsicherheit bei der Halterwahl haben, erhalten technische Unterstützung für die richtige Kombination. Empfehlung: Für prozesssichere Zerspanung die Tungaloy VCMT160408 AH905 über Metav Werkzeuge beziehen oder technische Beratung unter info@metav-werkzeuge.com / +49 2822 7131930 anfordern Produktmerkmale Artikelnummer: 6879340 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT160408-PS AH905 SKU Hersteller: TUN6879340 Daten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 16 mm Freiwinkel: 7° Winkel: 35° Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall Sorte: AH905 Spanbrecher: PS Plattenform: Rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Drehen (Außen- und Innendrehen) Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Welche Werkstoffe lassen sich mit der VCMT160408-PS AH905 am besten bearbeiten? Die VCMT160408-PS AH905 von Tungaloy eignet sich besonders für Stahl und legierte Stähle; dank der PVD-Beschichtung bietet die Wendeschneidplatte gute Standzeiten bei anspruchsvoller Zerspanung. Wie groß ist der Eckenradius und welchen Einfluss hat er auf die Oberfläche? Der Eckenradius beträgt 0,8 mm; ein größerer Radius verbessert die Kantentragfähigkeit und reduziert Riefenbildung, was zu besserer Oberflächengüte führt. Ist die Platte mit Standard-ISO-Haltern kompatibel? Ja, die Platte ist ISO-genormt und kompatibel mit entsprechenden Außenhaltern, solange Form, Freiwinkel, Befestigung und Dicke übereinstimmen. Was bedeutet die Sortenbezeichnung AH905 bei dieser Wendeschneidplatte? AH905 kennzeichnet eine verschleiß- und ausbruchfeste Hartmetallsorte von Tungaloy, die speziell für prozesssichere Dreharbeiten entwickelt wurde. Welche Besonderheit hat der PS-Spanbrecher bei dieser Ausführung? Der PS-Spanbrecher sorgt für kontrollierte Spanbildung, verbessert Spanablauf und reduziert die Gefahr von Spanverwicklungen bei mittleren bis hohen Schnittbedingungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 160408 AH905 Wendeplatten - Tungaloy
VCMT 160408 AH905 ISO-Drehwendeschneidplatte für Drehen – Tungaloy VCMT 160408 AH905 überzeugt als verschleißfeste PVD-beschichtete Wendeschneidplatte für präzises Außen- und Innendrehen PVD-beschichtetes Hartmetall für lange Standzeit Hohe Prozesssicherheit durch scharfe Schneidkante Rhombische Form 16 mm für vielseitige Anwendungen Mit zylindrischem Loch und einseitiger Senkung Freiwinkel 7° und Eckenradius 0,8 mm für feine Oberflächen Hohe Standzeit durch moderne Beschichtung und Hartmetall Die Kombination aus PVD-Beschichtung und hochwertigem Hartmetall sorgt für eine deutlich verbesserte Verschleißfestigkeit und reduziert Werkzeugausfälle. Die Beschichtung stabilisiert die Schneidkante und minimiert Kantenabplatzungen, was besonders bei unterbrochenem Schnitt und abrasiven Werkstoffen relevant ist. Dadurch sinken Rüstzeiten und Nacharbeit, und die Produktivität in der Serienfertigung steigt messbar. Präzision und Kompatibilität für produktive Zerspanung Die rhombische Plattenform mit 16 mm Kantenlänge, Freiwinkel 7° und Eckenradius 0,8 mm bieten eine ausgewogene Kombination aus Stabilität und Schnittschärfe. Die Geometrie ist auf ISO-Normen ausgelegt und gewährleistet die Kompatibilität mit gängigen Haltersystemen. VCMT 160408 AH905 liefert reproduzierbare Ergebnisse bei Außen- und Innendrehen und erleichtert die Auswahl passender Spanformer für unterschiedliche Werkstoffe. Zielgruppe, Anwendung und unmittelbarer Kundennutzen Entwickelt für Zerspanungsprofis in Werkstatt und Fertigung, ist diese Wendeschneidplatte ideal für Anwender, die hohe Prozesssicherheit und konstante Oberflächengüte erwarten. Anwender profitieren von geringeren Stillstandszeiten, planbaren Werkzeugwechselintervallen und stabilen Bearbeitungsergebnissen. Die Platte empfiehlt sich insbesondere bei anspruchsvollen Stahl- und rostfreier Stahl-Bearbeitungen sowie beim Einsatz in produktionsnahen Umgebungen. Empfohlen wird die Verwendung der VCMT 160408 AH905 bei Serien- und Kleinserienfertigung; für individuelle Schnittdaten und Lieferbarkeit bitte die Anwendungstechnik unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 kontaktieren Produktmerkmale Artikelnummer: 6879345 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6879345 Bezeichnung: VCMT160408-PSS AH905 Daten Plattengröße: 16 Plattendicke: 4,76 mm Eckenradius: 0,8 mm Winkel: 35° Freiwinkel: 7° Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall Sorte: AH905 Spanbrecher: PSS (Spanformer für kontrollierten Spanbruch) Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch ISO-Bezeichnung: 160408 FAQ Ist die Platte für das Drehen von rostfreiem Stahl geeignet? Die VCMT160408-PSS AH905 von Tungaloy ist aufgrund der PVD-Beschichtung und der robusten Hartmetallbasis gut für die Bearbeitung von rostfreiem Stahl geeignet und bietet stabile Schneidkanten und Prozesssicherheit Welche Vorteile bietet der Spanbrecher PSS? Der Spanbrecher PSS erzeugt kurze, kontrollierte Späne, was die Spanabfuhr bei der VCMT 160408 AH905 erleichtert und die Oberflächengüte sowie Werkzeugstandzeit verbessert Welche Halter werden kompatibel sein? ISO-genormte Außenhalter oder Bohrstangen, die der Geometrie (Form, Freiwinkel, Toleranzklasse, Befestigung, Größe, Dicke) der VCMT160408-PSS entsprechen, sind kompatibel; bei Unklarheit empfiehlt sich ein Abgleich mit dem Halterhersteller oder unsere Anwendungstechnik Gibt es Empfehlungen für Schnittdaten? Schnittdaten hängen vom Werkstoff und der Maschinenstabilität ab; für konkrete Vorschläge zur VCMT 160408 AH905 stellt die Anwendungstechnik individuelle Parameter bereit Ist die Platte mit einem zylindrischen Loch für spezielle Schrauben vorgesehen? Ja, das zylindrische Loch mit einseitiger Senkung (40°–60°) ermöglicht die Befestigung mit gängigen Schraubsystemen und sorgt für sichere Positionierung Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 160408 AT9530 Wendeplatten - Tungaloy
Take advantage of cermet performance and ISO compatibility for consistent surface quality and predictable tool life; the AT9530 grade excels in finishing and light turning of steel, while the rhombic geometry and 0.8 mm corner radius deliver reliable edge engagement. Order through Metav Werkzeuge or consult our team for matching holders and availability via info@metav-werkzeuge.com or +49 2822 7131930 VCMT160408-PS AT9530 indexable turning insert — cermet grade for finishing, rhombic shape, 35° cutting geometry (Tungaloy) A VCMT160408-PS AT9530 indexable turning insert designed for finishing and light turning of steel, combining a rhombic profile with a precise 0.8 mm corner radius for improved surface finish and controlled wear Cermet grade AT9530 for high surface quality Rhombic shape with 35° cutting geometry 0.8 mm corner radius for fine finishes ISO-standard insert for broad holder compatibility Improved surface finish with cermet technology The coated cermet grade AT9530 is formulated for finishing and light machining of steel where surface quality and uniform wear are paramount. Cermet substrates combine ceramic hardness with metallic toughness, enabling a sharper cutting edge and reduced built-up edge during low- to medium-speed finishing passes. This results in a more consistent surface finish and fewer secondary operations, supporting efficient production runs and predictable part quality. Compatibility and secure clamping for stable turning The insert adheres to ISO-standard form VCMT and is supplied with a central hole configured as a cylindrical hole plus a single-side countersink (40°–60°), ensuring compatibility with common clamping systems. Compatibility to an insert holder is determined by form, clearance angle, tolerance class, fixation method, size and thickness; choosing the corresponding external holder or boring bar and the correct clamping set keeps the insert stable and minimises vibration for better dimensional control. Geometry and chip control tailored to finishing tasks A rhombic plate form combined with a 35° cutting geometry and the PS chipbreaker supports controlled chip formation during finishing cuts. The 0.8 mm corner radius balances edge strength with the ability to produce fine profiles and narrow corner radii on workpieces. For applications prioritising surface integrity and minimal rework, this combination reduces the risk of edge chipping while preserving the delicate geometry required for high-quality turned surfaces. Handling, selection and operational benefits With an insert thickness of 4.76 mm and a nominal size of 16 mm, the component fits common ISO toolholders and is straightforward to index and replace, reducing downtime. The coated AT9530 grade promotes even wear progression across the cutting edge, which simplifies tool life monitoring and planning. When matched to suitable feeds and depths for finishing passes, the insert helps maintain cycle consistency and lowers the need for frequent tool interventions, contributing to predictable throughput. For precision finishing with Tungaloy cermet grade AT9530, contact Metav Werkzeuge for stock information and holder-matching advice via info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge can advise on the optimal clamping and setup for the application. Technical Data Article number: 6723983 Manufacturer SKU: TUN6723983 Product designation: VCMT160408-PS AT9530 Facts Corner radius: 0.8 mm Free clearance angle: 7° Cutting geometry angle: 35° Insert thickness: 4.76 mm Insert size: 16 mm Centre hole: cylindrical hole with single-side countersink (40°–60°) Special features Coating/grade: AT9530 (coated cermet) Application: finishing and light turning of steel Shape: rhombic Chipbreaker type: PS Holder compatibility: ISO-standard insert; compatibility defined by form, clearance, tolerance, fixation, size and thickness Material: carbide FAQ What materials is this insert intended for? This insert is designed for finishing and light turning of steel; the AT9530 cermet grade focuses on surface quality and even wear during such operations. Which holder type is compatible with this insert? Compatibility depends on ISO form, clearance angle, tolerance class, fixation method, size and thickness; select a holder or boring bar that matches the VCMT form and the insert's 16 mm size and 4.76 mm thickness. How does the AT9530 grade affect tool life and finish? The AT9530 coating provides a sharp, wear-resistant cutting edge that promotes consistent wear patterns, improving surface finish and enabling predictable tool life during finishing passes. Can the insert be used for roughing operations? This insert is optimised for finishing and light machining; for heavy roughing, consider grades and geometries specifically designed for higher stock removal. Is a specific chipbreaker required for finishing applications? The PS chipbreaker integrated on this insert supports controlled chip formation during finishing cuts and helps maintain surface integrity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 GT9530 Wendeplatten - Tungaloy
Combining a wear‑resistant GT9530 cermet grade with a 0.8 mm corner radius and ISO compatibility delivers longer tool life and improved surface finish in stable turning operations; order through Metav Werkzeuge or request technical advice from the specialists. VCMT 160408 GT9530 — VCMT160408-PSS Turning Insert (rhombic, with hole) by Tungaloy A VCMT160408-PSS GT9530 ISO indexable insert designed for external and internal turning, optimised for finishing and longer tool life under stable cutting conditions Wear-resistant cermet grade GT9530 Rhombic ISO shape 16 mm, 4.76 mm thick 0.8 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Longer tool life and consistent finishing with cermet technology The coated cermet grade GT9530 combines ceramic hardness with metallic toughness to resist abrasive wear while producing a consistently fine surface. In finishing and light universal turning of steel, this material class helps maintain cutting-edge stability at moderate cutting parameters, so tool change intervals are extended and downtime is reduced. The result is predictable component quality and fewer rework cycles thanks to the grade’s emphasis on wear resistance and surface integrity. Geometry tuned for precision and surface quality A rhombic ISO geometry with a 0.8 mm corner radius and a 35° lead angle provides a balance between radial engagement and chip flow that favours fine finishing operations. The PSS chipbreaker promotes controlled chip formation under steady conditions, which helps avoid surface blemishes and reduces the risk of built-up edge. With a plate size of 16 mm and thickness of 4.76 mm, the insert fits established ISO holders and contributes to repeatable dimensional accuracy when machining external and internal contours. Easy integration into ISO turning systems and application flexibility As part of the ISO turnplate system, the insert is compatible with holders when form, clearance, tolerance class, fastening, size and thickness match. The design with a cylindrical hole plus one‑sided countersink (40°–60°) facilitates secure clamping and quick indexation on standard toolholders. Selection of the PSS chipbreaker and the GT9530 grade should be matched to workpiece material and machine stability; when applied correctly, the system provides a straightforward route to higher productivity and consistent finishing results with cemented carbide‑based tooling. Contact Metav Werkzeuge for availability and technical consultation on Tungaloy VCMT inserts: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 6998412 SKU: 6998412-Tungaloy Manufacturer SKU: TUN6998412 Name: VCMT160408-PSS GT9530 Model series: ISO turning indexable inserts Material: cemented carbide Core data Plate size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Free rake angle: 7° Lead angle: 35° Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Coating/grade: GT9530 (coated cermet) Chipbreaker: PSS Plate form: rhombic Compatible with ISO holders for turning Intended application: external and internal turning System components: insert, holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The GT9530‑grade VCMT160408‑PSS insert is intended primarily for turning steel in finishing to light universal operations, benefiting from the wear resistance of the coated cermet. Can the insert be used for internal as well as external turning? Yes, the ISO rhombic geometry and secure hole/clamping design make the insert suitable for both external and internal turning applications when paired with appropriate holders. How does the PSS chipbreaker influence cutting performance? The PSS chipbreaker on this insert promotes controlled chip formation under stable cutting conditions, improving surface finish and reducing the chance of built‑up edge when machining steels with the GT9530 grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 160408 GT9530 Wendeplatten - Tungaloy
A cost-effective, wear‑resistant solution that combines the GT9530 coated cermet grade with ISO compatibility and a 0.8 mm corner radius to deliver consistent finishing and extended tool life in stable turning operations. Order the insert directly via Metav Werkzeuge or consult their specialists for holder compatibility and application advice. VCMT 160408 GT9530 – ISO turning insert (coated cermet, 0.8 mm corner radius) by Tungaloy A VCMT160408-PF GT9530 rhombic ISO turning insert engineered for finishing and light universal turning, optimised for steel machining under stable conditions Coated cermet GT9530 for wear resistance ISO rhombic 16 mm size, 4.76 mm thickness 0.8 mm corner radius for fine surface finish Cylindrical hole with 40°–60° countersink Consistent surface finish and predictable results The GT9530 coated cermet grade is designed to deliver stable cutting and an improved surface finish in finishing and light universal turning of steel. The small 0.8 mm corner radius helps reduce vibration at the cutting edge and supports a finer machined surface, which can lower downstream finishing effort. In practical terms, the grade’s wear characteristics lead to more predictable tool changes and reduced scrap rates, contributing directly to process reliability and overall efficiency. Longer tool life and efficient machining in stable setups The insert’s PF chipbreaker geometry and the hard, wear‑resistant cermet layer result in longer tool life where rigidity and consistent setup are maintained. Because the grade is optimised for stable cutting conditions, cycle times and tool consumption can be reduced when the machining environment is controlled. This translates into a favourable cost‑per‑part calculation for medium‑ to high‑volume batches and supports continuous production runs with fewer interruptions. Seamless integration with ISO tooling systems As an ISO rhombic insert, compatibility with holders is governed by form, relief angle, tolerance class, fastening method, size and thickness. The insert’s cylindrical hole with a 40°–60° countersink ensures secure clamping in many standard holders; the 35° lead angle and 7° relief provide the expected approach geometry for general turning tasks. Selection of an appropriate holder and stable clamping is essential to unlock the grade’s performance advantages and achieve repeatable results across workpieces. For application guidance on the Tungaloy GT9530 grade or to confirm holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and ordering. Technical data Article number: 6998404 SKU: 6998404-Tungaloy Manufacturer SKU: TUN6998404 Model series: ISO turning inserts Material: Carbide Core specifications Insert designation: VCMT160408-PF Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Lead/approach angle: 35° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Grade/coating: GT9530 (coated cermet) Chipbreaker: PF Shape: rhombic Typical application: turning (finishing to light universal) Compatibility: ISO holders (form, relief, tolerance, fastening, size, thickness) System components: ISO insert, compatible external holder or boring bar, shim/clamp set and replacement screw FAQ What materials is this insert suitable for? The VCMT160408-PF GT9530 is formulated primarily for steel machining, offering a wear‑resistant cermet surface suited to finishing and light universal cuts in stable setups. How does the GT9530 grade affect tool life? The GT9530 coated cermet improves wear resistance compared with uncoated grades, which can extend tool life under stable cutting conditions and reduce overall tool consumption. Which holder features are required for proper clamping? Secure clamping requires a matching ISO holder that accommodates the VCMT160408-PF form, relief angle, tolerance class and the cylindrical hole with a 40°–60° countersink to ensure repeatable stability. What surface finish can be expected with a 0.8 mm corner radius? A 0.8 mm corner radius supports finer surface finishes in finishing passes by reducing edge vibration and producing more consistent microgeometry on the workpiece. Is the insert delivered with matching hardware? The article is an ISO insert; the complete system includes a suitable external holder or boring bar plus shim/clamp sets and replacement screws, which should be selected to match the VCMT160408-PF geometry and mounting requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 GT9530 Wendeplatten - Tungaloy
Take advantage of the coated cermet composition and the PS chipbreaker to achieve finer surface finishes and extended tool life in stable turning operations; compatibility is ensured by matching form, clearance angle and size to the chosen toolholder. Order the insert directly via Metav Werkzeuge or ask our consultants for application support. VCMT160408 GT9530 turning ISO insert — coated cermet, PS chipbreaker (Tungaloy) A VCMT160408-PS GT9530 ISO turning indexable insert designed for finishing to light‑general turning of steel, offering high surface quality and consistent tool life in stable machining setups. Coated cermet grade GT9530 PS chipbreaker for fine finishing Rhombic 16 mm insert, 4.76 mm thick 7° clearance angle for stable cuts Consistent finishing performance for steel components The rhombic indexable insert with a corner radius 0.8 mm is engineered to deliver reliable fine finishing on steel components. The coated cermet composition increases wear resistance compared with uncoated cermet grades, which translates into more consistent part quality over longer runs. Because the geometry is optimised for stable setups, the insert reduces vibration and improves surface finish, especially when a lower feed and light depth of cut are chosen. The combination of material and geometry therefore supports predictable process results and less frequent tool changes. Precise chip control and predictable tool life A dedicated PS chipbreaker manages chip formation for finishing passes, producing short, controllable chips that reduce the risk of material re‑cutting and protect the workpiece surface. Under appropriate cutting conditions, the GT9530 grade demonstrates extended tool life relative to standard finishing grades, helping to lower downtime and overhead for frequent insert changes. The insert’s clamping and hole design contribute to repeatable seating and stable cutting forces, which is beneficial for batch production and longer machining cycles. Practical compatibility and easy integration into existing systems The insert is made to the ISO series dimensions; compatibility with a holder is determined by form, 7° clearance angle, tolerance class, clamping method, 16 mm size and 4.76 mm thickness. The insert features a cylindrical hole with a single‑side countersink (40°–60°) to suit common securing systems. This standardisation enables quick replacement in many established toolholder systems without the need for special adapters, reducing setup complexity and supporting smooth production flow. Where this insert brings real value For operations requiring reliable finishing on steel—where consistent surface quality and longer intervals between index changes matter—this insert offers a cost‑effective solution through lower process variability and reduced rework. The design supports high process reliability when machine rigidity and toolholder stability are sufficient. If adaptability for different steels or more aggressive cutting is needed, selecting the appropriate chipbreaker and matching the GT9530 grade to the application ensures optimum results. The Tungaloy production pedigree adds an assurance of consistent manufacturing quality and material homogeneity. Contact Metav Werkzeuge for tailored application advice, availability of the Tungaloy VCMT160408-PS GT9530 indexable insert and assistance with holder compatibility and delivery options. Technical Data Article number: 6998417 Manufacturer SKU: TUN6998417 Label / SKU: 6998417-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Numbers / Core Technical Data Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 7° Approach angle: 35° Countersink angle: 40°–60° Designs / Special features Coated cermet grade GT9530 Chipbreaker: PS Rhombic insert form Cylindrical hole with single‑side countersink For turning (finishing to light universal) on steel Compatibility depends on form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suited for? The VCMT160408-PS GT9530 is intended primarily for steel finishing operations and performs best under stable cutting conditions. How does the PS chipbreaker affect machining? The PS chipbreaker produces short, controllable chips for finishing passes, improving surface integrity and reducing the risk of re‑cutting. What are the key dimensions to check for holder compatibility? Verify insert size (16 mm), thickness (4.76 mm), corner radius (0.8 mm) and the 7° clearance angle when matching the insert to a holder. Is the insert suitable for roughing cuts? The GT9530 grade and PS chipbreaker are optimised for finishing to light‑duty universal turning; for heavy roughing applications a different grade or chipbreaker should be selected. What is the article number and manufacturer SKU? Article number 6998417, manufacturer SKU TUN6998417 for the Tungaloy VCMT160408-PS GT9530 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, ISO compatibility and a sharp cermet cutting grade for stable, high-quality turning results; order the insert directly via Metav Werkzeuge or ask the consultants for holder compatibility and application advice. VCMT 160408 NS9530 ISO turning insert – rhombic, TM chipbreaker by Tungaloy VCMT 160408 NS9530 is an ISO-standard rhombic turning insert intended for finishing operations on steel, offering a sharp cutting edge and low cutting forces for continuous cuts Rhombic ISO insert, 35° cutting edge NS9530 uncoated cermet for fine finishing 0.8 mm corner radius for smooth surfaces Cylindrical hole with one-sided countersink Improved surface finish with a fine cermet edge The combination of the NS9530 uncoated cermet grade and the precise rhombic geometry yields consistently high surface quality in finishing cuts. The sharp cutting edge of the cermet reduces cutting forces, which is particularly beneficial for continuous turning and small depths of cut; this minimises vibration and the need for secondary finishing. The small 0.8 mm corner radius supports a smooth transition on external and internal profiles while preserving edge strength for predictable performance. Predictable mounting and dimensional control for productivity Built to ISO standards, the insert’s shape, clearance and thickness enable reliable matching to compatible holders and boring bars. The rhombic form with a 35° cutting angle and 7° clearance ensures stable chip flow and repeatable clamping behaviour. The plate thickness of 4.76 mm and the cylindrical hole with a one-sided countersink (40°–60°) simplify secure fastening and replacement routines. For assistance with correct holder selection and tolerance class checks, technical consultation is available by email or phone. Efficiency in finishing steel with a low-force cutting solution The carbide-backed, cermet cutting grade is aimed at finishing operations on steel where a sharp edge and low thermal sensitivity improve tool life and surface finish. The TM chipbreaker supports continuous chips and small feeds, reducing interruptions and rework. Shops seeking consistent, high-quality turned parts will benefit from fewer rejects and reliable repeatability when integrating this insert into standard ISO holders and clamping systems. Contact Metav Werkzeuge for application guidance and availability of the Tungaloy VCMT 160408 NS9530 insert, including recommendations for holder compatibility and cutting parameters. Technical data Article number: 6945326 Manufacturer SKU: TUN6945326 SKU: 6945326-Tungaloy Model series: ISO turning inserts Facts Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 7° Cutting angle: 35° Special features Material: carbide substrate Cutting grade: NS9530 (uncoated cermet) Chipbreaker: TM Shape: rhombic Hole: cylindrical hole with one-sided countersink (40°–60°) Suitable for: external and internal turning Intended for: finishing steel, continuous cuts and small depths of cut FAQ What materials is this insert best suited for? The VCMT 160408 NS9530 insert from Tungaloy is engineered primarily for finishing steel, using the NS9530 uncoated cermet grade to deliver a sharp edge and low cutting forces suitable for continuous cuts. Can this insert be used for internal and external turning? Yes. The rhombic geometry and ISO conformity make the insert suitable for both external and internal turning applications when paired with a compatible holder. How is holder compatibility determined for this insert? Compatibility depends on the insert form, clearance angle, tolerance class, clamping method, size and thickness; check the VCMT 160408 NS9530 dimensions against the holder’s specifications before assembly. Is the cutting edge coated? No. The VCMT 160408 NS9530 uses an uncoated cermet grade (NS9530), chosen for its sharp edge and finishing performance. What are the primary benefits of choosing this insert? The main advantages are improved surface finish, reduced cutting forces in finishing turns and predictable edge behaviour, all of which support higher first-pass quality and consistent throughput with appropriate cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of a high‑precision finishing grade that combines a sharp cutting edge, low cutting forces and consistent surface quality for uninterrupted production. Benefit from an ISO‑standard insert with a robust clamping interface for reliable changeovers — order directly via Metav Werkzeuge or consult our specialists for application-specific advice. VCMT 160408 NS9530 – Turning insert VCMT160408‑PSF, uncoated cermet (Tungaloy) The VCMT160408-PSF NS9530 is an ISO turning insert optimised for finishing steel, offering a sharp cutting edge, low cutting forces and a PSF chipbreaker suited to continuous cuts and small depths of cut ISO rhombic insert VCMT 160408 format Uncoated cermet NS9530 for fine finishing PSF chipbreaker for continuous cutting Exceptional surface quality with minimal cutting force The uncoated cermet grade is formulated for finishing operations on steel and produces noticeably improved surface texture without aggressive cutting loads. Thanks to the sharp cutting edge geometry, feed and depth can be kept modest while achieving tight surface tolerances; this translates into fewer downstream finishing steps and improved component consistency. The substrate hardness and edge stability ensure repeatable performance during small, continuous cuts typical of precision turning. Consistent chip control for stable cycle times Chip formation is governed by the PSF chipbreaker, which is designed to channel swarf predictably in steady cutting conditions. For applications where uninterrupted runs and low vibration are essential, the chipbreaker helps maintain a stable process window and reduces the risk of rework. The combination of chip control and the grade’s cutting behaviour supports longer production runs with steady part quality and reduced machine intervention. Clear compatibility and straightforward tool selection As an ISO‑standard indexable insert, compatibility with toolholders depends on the insert form, relief angle, tolerance class, fastening and thickness. The rhombic form with a 7° relief angle and the standardised mount mean the insert is interchangeable in ISO‑compliant holders when the holder accepts the VCMT geometry and the PSF chipbreaker. Selecting the correct holder and tightening sequence preserves the integrity of the cutting edge and ensures accurate repeatability at each index. Designed for repeatable accuracy and efficient turning The insert’s geometry — including a 35° approach angle and a 0.8 mm corner radius — is targeted at finishing tasks where surface appearance and dimensional control matter. The modest 4.76 mm plate thickness contributes to a rigid clamping interface, while the combination of cermet chemistry and edge form reduces cutting forces and heat generation. Together these characteristics support higher throughput per shift by shortening cycle times for final passes and lowering the probability of scrapped parts. Contact Metav Werkzeuge for tailored recommendations on Tungaloy finishing inserts or to discuss tooling combinations that match the VCMT160408‑PSF NS9530 to specific turning applications; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998598 Manufacturer item number: 6998598 SKU: 6998598-Tungaloy Manufacturer SKU: TUN6998598 Facts ISO designation: 160408 Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 7° Approach angle: 35° Special features Model series: ISO turning indexable inserts Grade/sort: NS9530 (uncoated cermet) Chipbreaker: PSF Plate shape: rhombic Mounting hole: with hole; cylindrical hole + one‑sided countersink (40°–60°) Material substrate: carbide Typical application: turning; finishing on steel with continuous cutting and small depths of cut FAQ What materials is this insert suitable for? The VCMT160408‑PSF NS9530 is a finishing grade optimised for steel; its uncoated cermet chemistry and edge geometry favour continuous cuts on steel workpieces. Is the insert compatible with standard ISO VCMT holders? Compatibility requires a holder that accepts the VCMT form, the 7° relief, the 4.76 mm thickness and the cylindrical hole with countersink; when the holder matches these parameters the insert fits ISO‑compliant tool systems. What advantage does the PSF chipbreaker provide? The PSF chipbreaker offers predictable chip control in continuous finishing cuts, supporting stable machining and reduced interruption from poor swarf evacuation. Can this insert be used for roughing operations? The NS9530 grade is primarily a finishing sort with a sharp edge and low cutting forces; it is not intended for heavy roughing where larger depths of cut and interrupted cuts are common. What is the recommended application for the corner radius? The 0.8 mm corner radius provides a balance between edge strength and fine surface finish, making it suitable for final passes that require dimensional accuracy and good surface quality. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 160408 NS9530 Wendeplatten - Tungaloy
VCMT160408-TSF NS9530 — ISO-Drehwendeschneidplatten für Drehen | Tungaloy Die VCMT160408-TSF NS9530 ist eine unbeschichtete Cermet-Wendeplatte für präzises Außen- und Innendrehen, konzipiert für Schlichtanwendungen mit hoher Oberflächenqualität. VCMT-Rhombusform für präzises Außen- und Innendrehen NS9530 Cermet, unbeschichtet, Schlichtsorte Scharfe Schneidkante für hervorragende Oberflächenqualität Freiwinkel 7° und Eckenradius 0,8 mm Zylindrisches Loch mit einseitiger Senkung 40°–60° Höchste Zerspanungspräzision bei Schlichtbearbeitung Die Wendeplatte verbindet ein Hartmetall-Substrat mit einem unbeschichteten Cermet-Schneidstoff, der speziell für Schlichtoperationen entwickelt wurde. Dadurch entstehen niedrige Schnittkräfte und eine besonders gleichmäßige Spanbildung, was die Oberflächenqualität verbessert. Die Kombination aus scharfer Schneidkante und dem feinkörnigen Schneidstoff sorgt für dauerhafte Stabilität bei kontinuierlichem Schnitt. Für Anwender, die gleichbleibende Bauteiloberflächen und reproduzierbare Ergebnisse verlangen, bietet diese Platte einen messbaren Vorteil. Einfache Integration und flexible Einsatzmöglichkeiten Die VCMT160408-TSF ist nach ISO genormt und lässt sich über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke zum passenden Halter zuordnen. Der Freiwinkel 7° reduziert Reibung an der Schneide, der Eckenradius 0,8 mm verbessert die Kantenstabilität bei kleinen Zustellungen. Das zylindrische Loch mit einseitiger Senkung (40°–60°) vereinfacht die Montage auf handelsüblichen Außenhaltern oder Bohrstangen und gewährleistet zuverlässigen Sitz bei höheren Schnittdrücken. Anwender profitieren von unkomplizierter Einsetzbarkeit in bestehende Prozessketten. Materialgerecht wählen und Fachbegriffe erklärt Als Schlichtsorte ist NS9530 für Stahl vorgesehen und liefert sehr gute Oberflächengüten bei geringen Schnitttiefen; TSF bezeichnet den Spanformer, ausgelegt für feine Spanbildung beim Schlichten. Cermet steht für keramisch-metallische Verbundwerkstoffe, die an der Schneide eine hohe Härte mit zähfließendem Verhalten kombinieren und so besonders glatte Oberflächen ermöglichen. Für Anwender, die zwischen Schrupp- und Schlichtoperationen unterscheiden, ist diese Platte eine wirtschaftliche Wahl für finale Bearbeitungsstufen. Empfehlen Sie die VCMT160408-TSF NS9530 von Tungaloy für feinste Schlichtbearbeitung und kontaktieren Sie bei technischen Fragen unsere Beratung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6945321 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6945321 Bezeichnung: VCMT160408-TSF Fakten Plattengröße: 16 mm Plattendicke: 4,76 mm Eckenradius: 0,8 mm Freiwinkel: 7° Winkel: 35° Besonderheiten Material: Hartmetall Schneidstoff: unbeschichtetes Cermet NS9530 Spanbrecher: TSF (Spanformer für Schlicht) Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen, Außen- und Innendrehen FAQ Welche Werkstoffe lassen sich mit der VCMT160408-TSF NS9530 bearbeiten? Die Wendeplatte NS9530 ist als Schlichtsorte für Stahl ausgelegt und liefert dort besonders gute Oberflächen; bei spezifischen Stahllegierungen empfiehlt sich eine Prozessfreigabe anhand der Werkstückanforderungen. Für welche Bearbeitungsphasen ist die VCMT160408-TSF geeignet? Die Platte ist für Schlichtoperationen konzipiert; durch den scharfen Schneidstoff und den Spanformer TSF eignet sie sich besonders für finale Durchgänge mit kleinen Zustellungen. Wie beeinflusst der Freiwinkel von 7° die Bearbeitung? Ein Freiwinkel von 7° reduziert die Reibung an der Schneidkante und unterstützt eine ruhigere Spanbildung, was die Standzeit und die Oberflächenqualität positiv beeinflusst. Welche Vorteile bietet das zylindrische Loch mit Senkung 40°–60°? Das Lochbild gewährleistet sicheren Sitz und präzise Positionierung auf handelsüblichen Haltern; die Senkung erleichtert die Fixierung und reduziert Vibrationen bei höheren Schnittkräften. Liegt die VCMT160408-TSF NS9530 als Einzelplatte vor oder in Sets? Die Angabe bezieht sich auf die einzelne ISO-genormte Wendeplatte VCMT160408-TSF NS9530; Mengenangaben entnehmen Sie bitte dem Angebot des Händlers. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com