VCMT 160408 NS9530 Wendeplatten - Tungaloy
VCMT160408-24 NS9530 VCMT 160408 NS9530 Drehen – ISO-Drehwendeschneidplatte von Tungaloy Die VCMT160408-24 NS9530 ist eine ISO-genormte Drehwendeschneidplatte für präzises Außen- und Innendrehen, ausgelegt auf Schlichtoperationen bei Stahl mit besonders hoher Oberflächengüte VCMT 160408 NS9530 für feine Schlichtbearbeitung Unbeschichtetes Cermet für scharfe Schneidkante Rhombische Platte mit 0,8 mm Eckenradius Mit Loch und einseitiger Senkung für sichere Spannung Optimiert für kontinuierlichen Schnitt und kleine Zustellungen Hohe Oberflächengüte durch Cermet-Schlichtsorte Die NS9530-Sorte basiert auf unbeschichtetem Cermet, das eine sehr scharfe Schneidkante erzeugt und dadurch niedrige Schnittkräfte ermöglicht. Für Anwender bedeutet das eine sichtbare Reduktion von Nachbearbeitungsaufwand und Mikrogeriefeln, weil die Oberflächengüte bereits beim ersten Schnitt hoch ist. Diese Eigenschaft macht die Platte besonders geeignet für Präzisionsbauteile und Anwendungen, bei denen Maßhaltigkeit und Glanz eine Rolle spielen. ISO-Kompatibel und sicher spannbar für produktive Abläufe Die Platte entspricht der ISO-Norm für Drehwendeschneidplatten und ist als rhombische Ausführung mit zylindrischem Loch und einseitiger Senkung (40°–60°) ausgeführt, was eine sichere und reproduzierbare Befestigung am Halter gewährleistet. Die Kombination aus Plattendicke 4,76 mm und Lochstil sorgt für hohe Stabilität im Werkzeugsystem und minimiert Vibrationen, wenn Halter und Unterlage korrekt ausgewählt werden. Wirtschaftlichkeit durch reduzierte Schnittkräfte und stabile Spanbildung Dank der Schlichtcharakteristik und der scharfen Kante verringert sich die Schnittkraft, was zu geringerem Werkzeugverschleiß und längeren Standzeiten führen kann. Für Fertigungsbetriebe resultiert daraus eine bessere Maschinenauslastung und weniger Nacharbeit. Durch konsequente Auswahl des passenden Spanbrechers und der Sorte lässt sich die Prozesssicherheit bei kontinuierlichem Schnitt signifikant steigern. Empfohlene Einsatzfelder und Auswahlhinweise Die Platte eignet sich primär für das Drehen von Stahl bei kleinen Zustellungen und kontinuierlichem Schnitt, sowohl außen als auch innen. Für beste Ergebnisse sollte der Spanbrecher 24 und die Sorte NS9530 passend zur Werkstückstabilität gewählt werden. Werkzeugkäufer in Lohnfertigung, Maschinenbau und Formenbau profitieren von der gezielten Schlichtperformance. Erläuterung: Ein Spanbrecher formt den Span, um Abhebungen und Schneidkräfte zu kontrollieren. Empfehlung: Für präzise Schlichtbearbeitung empfiehlt sich die NS9530-Sorte in Kombination mit ISO-kompatiblen Haltern; technische Details oder Bestellwunsch bitte direkt bei Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfragen Produktmerkmale Artikelnummer: 6998609 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT160408-24 NS9530 Hersteller SKU: TUN6998609 Daten Eckenradius: 0,8 mm Winkel: 35° Freiwinkel: 7° Plattendicke: 4,76 mm Plattengröße: 16 mm Spanbrecher: 24 Besonderheiten Material: Hartmetall Schneidstoff: unbeschichtetes Cermet Sorte/Beschichtung: NS9530 (Schlichtsorte für Stahl) Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Drehen ISO-genormt FAQ Für welche Werkstoffe eignet sich die VCMT160408-24 NS9530 am besten? Die VCMT160408-24 NS9530 ist als Schlichtsorte speziell für Stahl konzipiert; unbeschichtetes Cermet liefert hier die beste Kombination aus scharfer Schneidkante und hoher Oberflächengüte. Welche Vorteile bringt die unbeschichtete Cermet-Variante NS9530? Unbeschichtetes Cermet wie NS9530 reduziert Schnittkräfte und erzielt bessere Oberflächen, wodurch Nacharbeit und Werkzeugbelastung verringert werden; ideal für feine Schlichtoperationen mit kontinuierlichem Schnitt. Wie beeinflusst der Eckenradius die Bearbeitungsergebnisse? Der Eckenradius von 0,8 mm sorgt für eine stabilere Schneidkante gegenüber sehr kleinen Radien und verbessert die Standzeit bei Schlichtoperationen, ohne die Oberflächengüte merklich zu verschlechtern. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 160408 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade uncoated cermet NS9530 insert that combines a sharp cutting edge, low cutting forces and excellent surface quality for consistent finishing operations. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice and availability. VCMT 160408 NS9530 — ISO turning insert, finishing cermet by Tungaloy A finishing ISO turning insert, VCMT160408-PSS NS9530, designed for external and internal turning of steel with a sharp edge and optimised chip control Finishing-grade uncoated cermet NS9530 Sharp cutting edge for superior surface finish ISO VCMT160408 form with 7° clearance Consistent finishing and surface quality for small depths of cut The finishing-oriented grade is an uncoated cermet engineered to deliver a consistently fine surface. The NS9530 composition provides a sharp, wear-resistant edge with reduced built-up edge tendency, which results in low cutting forces and improved part finish during continuous cuts and small depths of cut. For users less familiar with metallurgy: cermet is a ceramic–metal composite that combines hardness with a fine cutting geometry; this permits low vibration and minimal smear on steel surfaces, making this solution suitable for precision turning tasks. Reliable chip control and secure seating in ISO tool systems Compatibility with a toolholder is determined by form, clearance, tolerance, fastening and plate dimensions; the ISO standard shape ensures predictable mounting. The rhombic plate geometry and the PSS chipbreaker support stable chip formation in finishing regimes, while the 7° clearance and 0.8 mm corner radius contribute to controlled engagement and edge security. The insert is supplied with a centred hole and a cylindrical hole plus single-sided countersink (40°–60°) for reliable clamping and repeatable positioning in a wide range of clamping systems. Productivity gains through process stability and material focus Selecting this grade for finishing of steel reduces process variability: the sharp edge lowers cutting resistance, which can extend cutter life and maintain workpiece tolerances across batches. The design supports continuous turning where stable chip flow and gentle cutting forces are essential. For production planners this means fewer interruptions, consistent surface finish from part to part and reduced rework — measurable benefits for throughput and overall process economy. Contact Metav Werkzeuge today for tailored application advice or to check stock and delivery options at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998602 Manufacturer SKU: TUN6998602 SKU: 6998602-Tungaloy Model series: ISO turning inserts Material: carbide ISO designation: VCMT160408-PSS Grade: NS9530 Core dimensions Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 7° Lead/approach angle: 35° Hole: with hole Special features Rhombic plate form PSS chipbreaker Uncoated cermet grade NS9530 Intended application: turning Compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this grade intended for? The VCMT160408-PSS NS9530 is formulated primarily for finishing of steel, offering a sharp edge and low cutting forces for high surface quality. Is the insert suitable for internal as well as external turning? Yes, the rhombic geometry and secure hole clamping make the insert suitable for both external and internal turning operations. Which chipbreaker is fitted and what is its benefit? The insert uses the PSS chipbreaker, which promotes stable chip control in finishing cuts and helps maintain uninterrupted machining cycles. How does the 0.8 mm corner radius influence surface finish? A 0.8 mm corner radius balances edge strength with fine finishing capability, reducing marks while preserving a robust cutting edge for consistent results. What dimensions and standards should be checked for holder compatibility? Verify ISO designation, plate form, thickness (4.76 mm), clearance (7°), hole style and size (16 mm) to ensure the holder and clamping hardware match the insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 NS9530 Wendeplatten - Tungaloy
Fehlinformation: Inkonsistente Angaben zu Schneidstofftyp und Material, was zu Missverständnissen und potenziellen Fehlern bei der Auswahl der geeigneten Werkzeuge oder Materialien führen kann, insbesondere wenn präzise Informationen für die Verarbeitung oder Herstellung erforderlich sind, da unterschiedliche Schneidstoffe und Materialien spezifische Eigenschaften und Anforderungen aufweisen, die berücksichtigt werden müssen, um optimale Ergebnisse zu erzielen und mögliche Schäden oder Ineffizienzen zu vermeiden, weshalb es von entscheidender Bedeutung ist, klare und konsistente Angaben bereitzustellen, um sicherzustellen, dass alle beteiligten Parteien über die notwendigen Informationen verfügen, um fundierte Entscheidungen zu treffen und die bestmögliche Leistung und Qualität zu gewährleisten.
VCMT 160408 T505 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T505, a 0.8 mm corner radius and ISO conformity for dependable cast-iron turning; order directly via Metav Werkzeuge or consult our specialists for tool pairing and application advice. VCMT 160408 T505 — VCMT ISO rhombic turning insert for turning by Tungaloy, CVD-coated carbide, 35° A VCMT160408-CM T505 is an ISO rhombic turning insert designed for efficient external and internal turning, optimised for cast-iron machining with a stable chipformer and ISO-compatible mounting. CVD-coated carbide grade T505 Optimised for economical cast-iron machining Rhombic 16 mm plate with 35° cutting angle 0.8 mm corner radius for stable cuts Higher productivity through a coating and grade matched to cast iron The CVD-coated carbide T505 grade delivers a balance between wear resistance and economy when machining grey and nodular cast iron. The CVD-coated surface improves abrasion resistance and supports stable cutting at recommended speeds, which reduces the frequency of tool changes and contributes to lower machining costs over time. Choosing the correct chipbreaker CM for the workpiece stability and the type of cut (continuous or interrupted) ensures consistent chip control and surface quality. This combination leads to measurable efficiency gains in series production and jobbing work. Faster set-ups and repeatable clamping with ISO conformity The insert is an ISO-type plate, so compatibility with holders is governed by plate geometry, clearance angle (7°), tolerance class, fastening method, plate size and thickness. The rhombic shape and 35° cutting edge angle allow favourable approach geometry for both facing and turning profiles, while the central hole with a cylindrical bore and a single-sided countersink (40°–60°) enables secure clamping and straightforward indexation. Using ISO-compliant clamping systems and the correct shim or clamping set reduces set-up time and guarantees repeatable positioning for series work. Robust edge strength and predictable tool life for stable machining A 0.8 mm corner radius provides additional edge strength, improving performance in heavier cuts and when machining interrupted surfaces. The plate thickness of 4.76 mm and the overall 16 mm plate dimension contribute to mechanical stability in the seat, reducing vibration and improving surface finish. The grade and geometry combination supports steady cutting forces, which translates into longer effective tool life and fewer tool changes — a clear economic advantage. The insert forms part of a system that includes a matching external holder or boring bar, shims/clamping sets and spare screws to maintain productivity on the shop floor. For application advice, toolholder matching or to order the VCMT160408-CM T505 from Tungaloy, please contact Metav Werkzeuge — our specialists will help select the correct chipbreaker and holder for the machining task. Technical Data Article number: 6831920 Manufacturer SKU: TUN6831920 SKU: 6831920-Tungaloy Model series: ISO turning indexable inserts Designation: VCMT160408-CM T505 Manufacturer: Tungaloy Numbers / Core technical data Plate size: 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 7° Cutting/lead angle: 35° Countersink angle: 40°–60° Designs / Special features Material: cemented carbide Coating / grade: CVD-coated grade T505 Chipbreaker: CM Plate shape: rhombic Hole: with hole; cylindrical bore + one-sided countersink Intended application: turning (external and internal) Typical system: ISO insert, matching outer holder or boring bar, shim/clamping set, spare screws FAQ What materials is this insert best suited for? The VCMT160408-CM T505 is formulated for economical machining of cast iron; the CVD-coated T505 grade provides wear resistance and good chip control when turning cast-iron components. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength and stability, helping the VCMT160408-CM T505 withstand heavier cuts and interrupted cuts while improving surface finish consistency. Which holders are compatible with this ISO plate? Compatibility is determined by plate shape, clearance angle (7°), tolerance class, fixing method, size and thickness; use ISO-compliant holders specified for rhombic VCMT 16 mm plates and ensure correct shim and clamping hardware. Is the insert suitable for internal boring as well as external turning? Yes; the rhombic geometry and 35° cutting angle make the insert adaptable for both external and internal turning operations when paired with an appropriate boring bar or holder. What does the CM chipbreaker support? The CM chipformer is optimised for chip control in typical cast-iron turning applications; selection should consider workpiece stability, feed and whether the cut is continuous or interrupted. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 T5115 Wendeplatten - Tungaloy
VCMT 160408 T5115 ISO-Drehwendeschneidplatte für Drehen von Tungaloy Die VCMT160408-CM T5115 ist eine ISO-genormte Drehwendeschneidplatte für universelles Außen- und Innendrehen mit CVD-beschichtetem Hartmetall und ausgewogener Kombination aus Verschleißfestigkeit und Schneidkantenstabilität CVD-beschichtetes Hartmetall für lange Standzeit Optimierter Spanformer CM für sauberen Spanbruch ISO-Form VCMT für weite Halterkompatibilität Rhombische Platte mit zylindrischem Loch und Senkung Universalsorte T5115 speziell für Gusseisen Hohe Produktivität durch stabile Schneidkante Die VCMT160408-CM T5115 bietet durch das CVD-beschichtete Hartmetall eine verbesserte Verschleißfestigkeit, die Standzeiten in Serienprozessen erhöht. Die Kombination aus robuster Schneidkante und optimiertem Spanformer sorgt dafür, dass weniger Werkzeugwechsel nötig werden und die Maschinenauslastung steigt. Anwender profitieren von konstanteren Bearbeitungsergebnissen und reduzierten Stillstandszeiten. Material und Beschichtung: Vorteil für Gusseisen Die Sorte T5115 ist als Universalsorte für Gusseisen ausgelegt und verbindet Härte mit Zähigkeit, sodass sie typische Gusswerkstoffe zuverlässig bearbeitet. Die CVD-Beschichtung verbessert die Wärmebeständigkeit und reduziert abrasive Verschleißformen; das Ergebnis sind gleichmäßigere Oberflächen und weniger Nacharbeit. Für Anwender ohne tiefes Werkstoffwissen: CVD steht für chemische Gasphasenabscheidung und erhöht die Widerstandsfähigkeit der Schneidkante. Passgenauigkeit und Einsatzflexibilität Dank der ISO-Bezeichnung und der rhombischen Form lässt sich die Platte in einer breiten Auswahl an Haltern einsetzen; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Die Konstruktion mit zylindrischem Loch und einseitiger Senkung (40°–60°) ermöglicht sichere Befestigung und einfache Montage. Damit ist die Platte sowohl für Einrichtarbeiten als auch für automatisierte Fertigungsprozesse geeignet. Wirtschaftlicher Nutzen in der Fertigung Wegen der ausgewogenen Eigenschaften der Sorte und des robusten Schneidstoffs reduziert die Wendeschneidplatte Werkzeugkosten pro gefertigten Bauteil. Die VCMT-Geometrie und der Spanformer CM unterstützen kontrollierten Spanfluss, was den Verschleiß von Werkzeugen und Spannmitteln mindert. Insgesamt ergibt sich ein Beitrag zur Steigerung der Prozesssicherheit und zur Senkung der Fertigungskosten. Empfehlung: Für produktive Serienbearbeitung die CVD-beschichtete Sorte T5115 von Tungaloy verwenden; bei technischen Fragen oder für Bestellungen direkt Metav Werkzeuge kontaktieren unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6864690 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT160408-CM Artikelname: VCMT160408-CM T5115 Hersteller SKU: TUN6864690 Fakten Eckenradius: 0.8 mm Plattendicke: 4,76 mm Plattengröße: 16 mm Winkel: 35° Freiwinkel: 7° Besonderheiten Material: Hartmetall Beschichtung: CVD beschichtet Sorte: T5115 Spanbrecher: CM Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Welche Werkstoffe eignet die VCMT160408-CM T5115 besonders gut? Die VCMT160408-CM T5115 ist speziell für Gusseisen optimiert; durch die CVD-Beschichtung und die Sorte T5115 lassen sich abrasive Gusswerkstoffe effizient und mit guter Standzeit bearbeiten. In welchen Haltern ist die Platte einsetzbar? Die ISO-Genormung der VCMT-Geometrie ermöglicht Einsatz in vielen Außenhaltern und Bohrstangen; die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Wie trägt der Spanformer CM zur Bearbeitung bei? Der Spanformer CM sorgt für definierten Spanbruch und kontrollierten Spanfluss, was die Prozesssicherheit erhöht und die Gefahr von Spanverwicklungen reduziert. Welches Ergebnis liefert die Beschichtung bei höheren Schnittgeschwindigkeiten? Die CVD-Beschichtung erhöht die Wärmebeständigkeit der Schneidkante, verbessert die Verschleißfestigkeit und erlaubt stabilere Ergebnisse auch bei erhöhten Schnittwerten. Gibt es eine Herstellerartikelnummer für Nachbestellungen? Ja, die Herstellerartikelnummer lautet 6864690; alternativ kann die Hersteller SKU TUN6864690 bei Bestellungen genannt werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 160408 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated T6215 carbide grade and the ISO‑standard VCMT form for consistent, wear‑resistant performance when turning stainless steel; compatibility with the toolholder is determined by form, clearance angle and plate thickness. Order the VCMT160408‑TM T6215 directly via Metav Werkzeuge or contact our consultants for holder matching and availability. VCMT160408-TM T6215 — ISO turning insert, CVD‑coated carbide for stainless‑steel turning by Tungaloy VCMT160408-TM T6215 is an ISO‑standard rhombic insert designed for external and internal turning of stainless steel under stable to lightly interrupted cutting conditions CVD‑coated carbide grade T6215 for stainless steel 0.8 mm corner radius for controlled chip formation Rhombic ISO insert, 16 mm, 7° clearance Cylindrical hole with one-sided countersink Reliable wear resistance for stable stainless‑steel turning The CVD‑coated carbide in grade T6215 is formulated for wear resistance when machining stainless steel under stable or mildly interrupted cuts. The chemical vapour deposition (CVD) coating creates a hard, adherent layer that reduces flank wear and heat‑related adhesion—this means longer intervals between indexings and fewer unexpected tool changes. The integrated chipbreaker TM promotes consistent chip control, reducing the risk of built‑up edge and improving surface finish without needing complex process adjustments. For operations where repeatability and uptime are key, the combination of substrate and coating offers a measurable improvement in productive tool life. Precise geometry and secure clamping for predictable results The ISO‑format rhombic geometry (designation 160408) with a 0.8 mm corner radius and 7° clearance ensures predictable engagement and cutting forces during turning. The insert thickness of 4.76 mm and the 16 mm inscribed circle fit standard ISO holders; the insert features a cylindrical hole with a one‑sided countersink (40°–60°) for positive, repeatable clamping. Because holder compatibility depends on form, free angle, tolerance class, fastening and plate thickness, the system is normally assembled from an ISO insert, a matching external holder or boring bar, a shim/locking set and replacement screws—this modular approach simplifies replacement and keeps machine downtime to a minimum. Improve throughput and lower total machining cost Adopting inserts with stable cutting behaviour and optimised chip control leads directly to higher productivity and lower tooling cost per part. The T6215 grade is tailored for productive cutting of stainless steels: the coating and substrate combination reduces flank wear and preserves edge integrity, while the chipbreaker geometry improves evacuation of chips in both external and internal turning. Less frequent tool changes and improved surface quality reduce rework and machine idle time, contributing to a better overall cost‑benefit ratio for batch and continuous production runs. For shops looking to standardise tooling for stainless‑steel turning, these inserts offer a solid balance of tool life and process reliability. For reliable stainless‑steel turning with proven wear resistance, request the Tungaloy VCMT160408‑TM T6215 from Metav Werkzeuge or contact our technical team to confirm holder compatibility and current stock levels. Technical data Article number: 6945325 Manufacturer SKU: TUN6945325 Label: VCMT160408‑TM T6215 Manufacturer: Tungaloy Facts Corner radius: 0.8 mm Inscribed circle / size: 16 mm Plate thickness: 4.76 mm Clearance angle: 7° Geometry code: 160408 Lead/approach angle: 35° Special features CVD‑coated carbide, grade T6215 Chipbreaker type TM Rhombic plate form Cylindrical hole with one‑sided countersink (40°–60°) ISO turning insert series for external and internal turning Application: turning of stainless steel under stable to slightly interrupted conditions FAQ What materials is this insert designed for? The VCMT160408‑TM T6215 is designed primarily for stainless steel turning; the T6215 CVD‑coated carbide provides wear resistance suitable for stable and lightly interrupted cuts. Which insert geometry and size does it use? This is a rhombic ISO insert with the geometry code 160408, an inscribed circle of 16 mm and a plate thickness of 4.76 mm, offering a 0.8 mm corner radius. How does the chipbreaker TM affect machining? The TM chipbreaker is engineered for improved chip control during turning of stainless steel, promoting reliable chip formation and evacuation to enhance surface finish and reduce rework. What should be checked for holder compatibility? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; consult holder specifications to ensure correct fit for the VCMT160408‑TM. Is this an original Tungaloy product and where can it be ordered? The insert is an original Tungaloy ISO turning insert (VCMT160408‑TM T6215, SKU 6945325‑Tungaloy) and can be requested via Metav Werkzeuge for availability and delivery options. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 160408 T6215 Wendeplatten - Tungaloy
VCMT 160408 T6215 ISO-Drehwendeschneidplatte zum Drehen — Tungaloy Die VCMT 160408 T6215 ist eine ISO-genormte, rhombische Drehwendeschneidplatte für das Drehen von rostfreiem Stahl unter stabilen bis leicht unterbrochenen Schnittbedingungen. ISO-genormte rhombische Wendeschneidplatte CVD-Beschichtung T6215 für rostfreien Stahl Mit zylindrischem Loch und Senkung 40°–60° 0,8 mm Eckenradius für stabile Schneidkante Plattendicke 4,76 mm für robuste Anwendung Höchste Verschleißfestigkeit durch Material und Beschichtung Die Kombination aus Hartmetall und CVD-Beschichtung sorgt für eine deutlich verbesserte Lebensdauer bei der Bearbeitung von rostfreiem Stahl. Die Sorte T6215 wurde gezielt für verschleißfeste Anwendungen entwickelt und reduziert Werkzeugwechsel sowie Stillstandzeiten. Für Anwender bedeutet das weniger Rüstaufwand und längere Laufzeiten im Produktionsprozess. Präzise Leistung bei stabilen Schnittbedingungen Dieses Plattendesign liefert konstante Ergebnisse beim Außen- und Innendrehen, wenn mit stabiler Aufspannung gearbeitet wird. Der geringe Eckenradius 0,8 mm und der definierte Freiwinkel 7° ermöglichen eine stabile Schneidkante und gleichbleibende Oberflächengüte. Die Auswahl des Spanbrechers PSS unterstützt die Spanformung speziell bei rostfreien Werkstoffen und trägt zur Prozesssicherheit bei. Systemkompatibilität und einfache Integration in den Werkzeugsatz Kompatibilität wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt; die Platte ist als VCMT160408-PSS ausgeführt und verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°) zur sicheren Fixierung. Durch die ISO-Normung lässt sich die Platte unkompliziert mit passenden Außenhaltern, Bohrstangen und Klemmsätzen kombinieren, was Rüstzeiten verkürzt und die Wiederholgenauigkeit erhöht. Für wen diese Platte entwickelt wurde Maschinenbetreiber und Fertigungsleiter, die Produktionssicherheit und Wirtschaftlichkeit priorisieren, profitieren von der VCMT 160408 T6215. Entwickelt für den anspruchsvollen Einsatz in Werkstätten und Serienfertigung, bietet sie eine zuverlässige Lösung für die spanende Bearbeitung von rostfreiem Stahl bei stabilen Bearbeitungsbedingungen. Empfehlung: Entscheiden Sie sich für die VCMT 160408 T6215 von Tungaloy für eine wirtschaftliche und prozesssichere Zerspanung; für technische Rückfragen steht das Metav Werkzeuge Team gerne per E-Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung. Produktmerkmale Artikelnummer: 6877343 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT160408-PSS T6215 Hersteller SKU: TUN6877343 SKU: 6877343-Tungaloy Fakten Radius: 0,8 mm Winkel: 35° Freiwinkel: 7° Plattendicke: 4,76 mm Plattengröße: 16 mm Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD = chemische Dampfabscheidung) Sorte: T6215 Spanbrecher: PSS (optimiert für rostfreie Stähle) Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Wendeplattenbezeichnung: VCMT160408-PSS FAQ Brauche ich einen speziellen Halter für diese Platte? Für die VCMT 160408 T6215 wird ein ISO-kompatibler Halter mit passender Form, Freiwinkel und Befestigung benötigt; die Platte ist so konzipiert, dass sie mit gängigen Außenhaltern und Bohrstangen nach ISO-Norm kombiniert werden kann. Für welche Werkstoffe eignet sich die Platte besonders? Die Sorte T6215 und der Spanbrecher PSS sind speziell für die Bearbeitung von rostfreiem Stahl ausgelegt und bieten dort beste Verschleißfestigkeit und Spanformung. Wie beeinflusst der Eckenradius die Bearbeitung? Der Eckenradius von 0,8 mm stabilisiert die Schneidkante und reduziert Kantenbrüche, was zu konstanter Oberflächengüte und längerer Standzeit beiträgt. Ist die Platte für unterbrochene Schnitte geeignet? Die Platte ist ausgelegt für stabile bis leicht unterbrochene Schnittbedingungen; bei stark unterbrochenen Schnitten sollten spezielle Sorten oder Geometrien geprüft werden. Welche Vorteile bringt die CVD-Beschichtung konkret? Die CVD-Beschichtung erhöht die Wärme- und Verschleißbeständigkeit, verbessert die Standzeit und sorgt für gleichbleibende Performance bei der Zerspanung von rostfreiem Stahl. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 160408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability and a precise 0.8 mm corner radius for consistent turning results; the ISO form and secure hole design ensure repeatable seating and efficient chip control. Order the VCMT160408-PS T6215 directly via Metav Werkzeuge or ask the consultants for application support. VCMT 160408 T6215 ISO turning insert — CVD-coated carbide, 35° rhombic by Tungaloy VCMT160408-PS T6215 is an ISO-format turning insert designed for reliable external and internal turning under stable to slightly interrupted conditions. CVD-coated carbide grade T6215 For turning rostfreier Stahl Rhombic 35° geometry, 0.8 mm radius Cylindrical hole with single-sided countersink Consistent productivity through wear-resistant cutting grade The CVD-coated T6215 grade delivers a wear-resistant cutting edge engineered for turning rostfreier Stahl in stable setups. The chemical vapour deposition layer increases abrasion resistance, which translates into longer in-machine life and fewer indexings. For production environments this means higher uptime and lower tooling cost per component; selecting the PS chipbreaker helps control chips and reduces the risk of recutting, especially when machining longer, slender components. Geometry engineered for repeatable seating and surface finish The rhombic 35° geometry combined with a 0.8 mm corner radius provides a balance between form strength and accessible cutting geometry for fine finishing and general turning. The insert’s 4.76 mm thickness and ISO form ensure robust clamping in compatible external holders or boring bars, while the cylindrical hole with a single-sided countersink (40°–60°) secures repeatable positioning and reliable torque transfer. These attributes result in consistent surface quality and reduce variability between tool changes. System integration and application guidance for workshop efficiency Supplied as an ISO-format plate, the insert is intended to fit standard holders when form, free angle, tolerance class, fastening, size and thickness match. The system concept comprises the indexable insert, an appropriate external holder or boring bar, a backing or clamping kit and replacement screws. For best results, match the PS chipbreaker and T6215 grade to the component material and stability of the setup; in less stable conditions, consider a different chipbreaker or support the workpiece to maintain cutting consistency. The VCMT160408-PS T6215 supports both external and internal turning operations and is suitable for many production scenarios where rostfreier Stahl is machined. For reliable high-volume turning of rostfreier Stahl request supply and technical support for the Tungaloy VCMT160408-PS T6215 from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6877347 Manufacturer SKU: TUN6877347 SKU: 6877347-Tungaloy Designation: VCMT160408-PS T6215 Model series: ISO turning indexable inserts Facts Corner radius: 0.8 mm Insert size: 16 mm Plate thickness: 4.76 mm Clearance angle: 7° Main angle: 35° Countersink angle: 40°–60° Special features CVD-coated carbide (T6215) Chipbreaker: PS Rhombic plate form Cylindrical hole with single-sided countersink Suitable for turning rostfreier Stahl ISO-format insert for standard holders FAQ Which materials is this insert suitable for? The VCMT160408-PS T6215 is designed primarily for machining rostfreier Stahl and offers wear resistance and consistent performance in that application. How does the PS chipbreaker affect machining? The PS chipbreaker promotes controlled chip formation during turning with the VCMT160408-PS, improving evacuation and reducing the risk of entanglement in stable to mildly interrupted cuts. What clamping features ensure repeatable seating? Repeatable seating is achieved via the ISO form, the cylindrical hole and the single-sided countersink (40°–60°), which together secure alignment in compatible holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 T6215 Wendeplatten - Tungaloy
VCMT 160408 T6215 Drehwendeschneidplatte für Drehen von rostfreiem Stahl | Tungaloy VCMT 160408 T6215 ist eine ISO-genormte Drehwendeschneidplatte zur effizienten Bearbeitung von rostfreiem Stahl unter stabilen bis leicht unterbrochenen Bedingungen CVD-beschichtetes Hartmetall für hohe Standzeit Optimierter Spanbrecher TSF für ruhigen Spanfluss Rhombische Form, Plattengröße 16 mm Mit zylindrischem Loch und einseitiger Senkung Freiwinkel 7° für stabile Schnittbedingungen Präzise Beschichtung und Materialvorteil für lange Standzeit Die Wendeschneidplatte basiert auf Hartmetall mit CVD-Beschichtung, die speziell für das Drehen von rostfreiem Stahl entwickelt wurde. Durch die Kombination aus robustem Trägermaterial und verschleißfester Beschichtung reduziert sich der Werkzeugverschleiß deutlich, was die Standzeit erhöht und Rüstzyklen seltener macht. Für Anwender bedeutet das weniger Stillstand und konstantere Bearbeitungsqualität bei fortlaufenden Serienläufen. Anwendungskompetenz: Stabiler Schnitt bei wechselnden Bedingungen Für Außen- und Innendrehen bietet die Platte durch ihren Spanbrecher TSF eine zuverlässige Spanformung, die Vibrationen und Aufbauschneiden minimiert. Die Platte eignet sich besonders, wenn Bearbeitungsbedingungen stabil bis leicht unterbrochen sind; bei stärkeren Unterbrechungen sollten Schneidparameter angepasst werden. Die praxisnahe Konstruktion unterstützt produktive Zerspanung und gleichbleibende Oberflächengüte. Systemkompatibilität und Montagehinweise für sicheren Einsatz Die Kompatibilität zum Halter hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Die rhombische Form in Plattengröße 16 mit Eckenradius 0,8 mm und Freiwinkel 7° erlaubt den Einsatz in gängigen ISO-Außenhaltern und Bohrstangen. Die Ausführung mit Loch und zylindrischer Bohrung plus einseitiger Senkung (40°–60°) gewährleistet sichere Fixierung und reproduzierbare Sitzlage im Klemmsatz. Zielgruppe und Empfehlung für effiziente Werkstattprozesse Entwickelt für Fertigungsbetriebe und Lohnbearbeiter, die rostfreie Stähle zuverlässig und wirtschaftlich zerspanen möchten. Die Platte ist besonders geeignet für Serien mit konstanten Schnittbedingungen, bei denen Prozesssicherheit und wiederholgenaue Ergebnisse gefragt sind. Anwender profitieren von der Kombination aus Produktivität, Standzeit und einfacher Handhabung im Maschinenalltag. Empfehlung: Für wirtschaftliche und produktive Dreharbeiten an rostfreiem Stahl empfiehlt sich die VCMT-ISO-Platte von Tungaloy; bei Fragen stehen wir per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung. Produktmerkmale Artikelnummer: 6945320 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT160408-TSF T6215 Hersteller-SKU: TUN6945320 Fakten Winkel: 35° Freiwinkel: 7° Plattendicke: 4,76 mm Plattengröße: 16 mm Eckenradius: 0,8 mm Besonderheiten Material: Hartmetall Schneidstoff: CVD-beschichtetes Hartmetall (verschleißfest) Spanbrecher: TSF (optimierte Spanformung für stabile Schnitte) Lochtyp: mit Loch, zylindrisches Loch + einseitige Senkung (40°–60°) Plattenform: rhombisch Einsatz: Drehen Einsatz der Sorte: verschleißfeste Sorte für das Drehen rostfreier Stähle unter stabilen bis leicht unterbrochenen Bedingungen FAQ Ist die Platte für Innen- und Außenbearbeitung geeignet? Die VCMT160408-TSF T6215 von Tungaloy ist sowohl für Außen- als auch für Innendrehen ausgelegt und bietet durch die rhombische Form und den Spanbrecher TSF stabile Spanbildung in beiden Anwendungen. Welche Werkstoffe lassen sich mit der Platte bearbeiten? Die Platte ist optimiert für rostfreien Stahl; dank der CVD-Beschichtung und der Sorte T6215 eignet sie sich besonders für verschleißende Bedingungen bei rostfreiem Material. Welche Halter sind kompatibel mit der VCMT-Platte? Kompatibilität ergibt sich aus Form, Freiwinkel, Größe und Dicke. VCMT160408-TSF benötigt einen ISO-kompatiblen Außenhalter oder Bohrstange mit passender Auflage und Klemmsatz. Wie beeinflusst der Eckenradius die Bearbeitungsergebnisse? Der Eckenradius 0,8 mm sorgt für stabilen Schnitt und bessere Schneidkantenbelastung, was sich positiv auf Oberflächengüte und Werkzeugstandzeit der VCMT-Platte auswirkt. Gibt es spezielle Montagehinweise wegen des Lochs und der Senkung? Die Ausführung mit zylindrischem Loch und einseitiger Senkung (40°–60°) ermöglicht sichere Befestigung; Schrauben und Unterlagen müssen zur Senkung und Lochform passen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 and a PS chipbreaker for consistent productivity and wear resistance in medium steel turning; order directly via Metav Werkzeuge or contact the team for tailored advice. VCMT 160408 T9215 — ISO turning insert, CVD-coated carbide, for turning (Tungaloy) A VCMT160408-PS T9215 insert engineered for external and internal turning operations, optimised for medium steel machining with reliable chip control. CVD-coated carbide T9215 PS chipbreaker for stable chip control 0.8 mm corner radius for fine finishes ISO rhombic 16 mm size, 4.76 mm thick High productivity in medium-steel turning The combination of a CVD-coated carbide substrate and the T9215 cutting grade delivers a balance of wear resistance and fracture toughness that supports elevated machining rates on medium steels. The plate’s PS chipbreaker is designed to form short, manageable chips during both continuous and light interrupted cuts, reducing downtime from chip handling and improving surface quality. This results in a measurable improvement in process stability and throughput when compared with uncoated or less specialised grades. Secure clamping and proven geometric compatibility Compatibility with the toolholder is determined by the plate’s geometry, relief angle, tolerance class, fixation method, size and thickness. The rhombic ISO form and the specified 7° relief angle ensure correct seating in standard holders; the cylindrical hole with a single-sided countersink (40°–60°) offers a reproducible clamp position. Matching the insert to a holder with the correct seat and clamping set-up reduces vibration and extends tool life, translating technical fit into consistent production outcomes. Why the T9215 grade benefits workshop efficiency The T9215 grade is formulated for the middle range of steel machining, combining a coated carbide’s abrasion resistance with a substrate that resists edge chipping. For workshops seeking reliable, repeatable performance, this cutting grade provides more predictable insert life across batch runs, lowering the frequency of tool changes. The modest 0.8 mm corner radius allows a fine finish while still offering edge strength for typical turning passes, making the insert well suited to semi-finishing and finishing passes where surface integrity matters. Practical guidance for application and setup Use the insert in standard external and internal turning configurations with a compatible holder, spacer and clamping set. The 4.76 mm thickness and 16 mm plate size are compatible with many ISO indexable systems; ensure the holder matches the plate form and tolerance class to avoid misalignment. For continuous cuts, select feeds and speeds that exploit the CVD coating’s abrasion resistance; for slightly interrupted cuts, the substrate toughness helps prevent premature chipping. When in doubt about parameter windows or holder matching, consult tooling data sheets or Metav Werkzeuge’s application advisors for tailored recommendations. For high-productivity steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for application support and prompt supply at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6772495 SKU: 6772495-Tungaloy Manufacturer SKU: TUN6772495 Label: VCMT160408-PS T9215 Model series: ISO-Drehwendeschneidplatten Data Corner radius: 0.8 mm Included angle / shape reference: 160408 Relief angle: 7° Plate thickness: 4.76 mm Plate size: 16 mm Insert angle: 35° Special features CVD-coated carbide cutting material Chipbreaker: PS Rhombic plate form Cylindrical hole with single-sided countersink (40°–60°) ISO-standard indexable turning insert series Application: turning (external and internal) Recommended for medium steel machining System composition: insert, matching external holder or boring bar, shim/clamp set and spare screws FAQ What materials is this insert suitable for? The VCMT160408-PS T9215 insert is intended primarily for medium steel machining; the T9215 grade combines wear resistance and toughness tailored to that material class. Which chipbreaker does the plate use and what does it do? This plate features a PS chipbreaker, designed to promote short, controllable chips during continuous and light interrupted cuts, improving process stability and surface finish. How does the plate secure to the holder? The plate uses a cylindrical hole with a single-sided countersink (40°–60°) for clamping; compatibility is governed by form, relief angle, tolerance class, fastening method, size and thickness. Can the insert be used for internal turning? Yes, the rhombic ISO geometry and 7° relief angle make the insert suitable for both external and internal turning applications when the correct holder is selected. What are the key dimensions to check when selecting a holder? Verify the plate size (16 mm), thickness (4.76 mm), corner radius (0.8 mm) and the relief angle to ensure correct seating and clamping in the chosen holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 T9215 Wendeplatten - Tungaloy
VCMT160408 T9215 – ISO-Drehwendeschneidplatte für Drehen (Tungaloy) VCMT160408 T9215 eignet sich für produktive Außen- und Innendrehprozesse und verbindet hohe Verschleißfestigkeit mit zuverlässiger Spanbildung. CVD-beschichtetes Hartmetall T9215 Optimiert für mittlere Stahlbearbeitung Rhombische Platte 16 mm, Radius 0,8 mm Mit zylindrischem Loch und einseitiger Senkung Spanbrecher PSF für stabile Spanformung Produktivität steigern durch stabile Schneidkante Mit der CVD-Beschichtung und dem Hartmetallträger wird eine ausgewogene Kombination aus Verschleißwiderstand und Bruchsicherheit erreicht. Das Ergebnis ist eine gesteigerte Produktivität bei kontinuierlichem bis leicht unterbrochenem Schnitt, da die Schneidkante länger formstabil bleibt. Diese Eigenschaft ermöglicht kürzere Nebenzeiten durch selteneren Werkzeugwechsel und trägt so zur Kostenoptimierung in Serienprozessen bei. Materialeigenschaften und Standzeitvorteile Die Sorte T9215 wurde speziell für die mittlere Stahlbearbeitung entwickelt und bietet eine gute Balance zwischen Härte und Zähigkeit. Die CVD-beschichtung schützt die Schneidkante vor thermischem und abrasivem Verschleiß, wodurch längere Standzeiten und reproduzierbare Oberflächenqualitäten erreichbar sind. Für Anwender bedeutet das planbare Prozesszeiten und höhere Ausbringung bei gleichbleibender Fertigungsqualität. Technische Formfaktoren für sichere Montage Die rhombische Plattenform mit Radius 0,8 mm und die Plattendicke von 4,76 mm sorgen für hohe Stabilität im Halter. Das zylindrische Loch mit einseitiger Senkung (40°–60°) erleichtert die fixe Positionierung und reduziert Aufspannungen, wodurch Vibrationen minimiert werden. Anwender sollten Halter anhand von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke auswählen, um optimale Schnittwerte zu erzielen. Anwendungsempfehlung und Auswahlhinweise Für Außen- und Innendrehen bietet der Spanbrecher PSF eine kontrollierte Spanformung, besonders bei mittleren Schnittbedingungen. Bei der Wahl der Kombination aus Platte, Halter und Schnittparametern empfiehlt sich die Abstimmung auf Werkstoff, Bearbeitungsart und Maschinenstabilität. Ein passend gewählter Freiwinkel von 7° unterstützt die Schneidkante bei der Spanabfuhr und reduziert Schnittkräfte. Empfehlung: Setzen Sie auf die hohe Prozesssicherheit der Tungaloy VCMT160408-PSF T9215 für produktive Drehprozesse – bei Rückfragen erreichen Sie uns per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6774023 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT160408-PSF T9215 Hersteller SKU: TUN6774023 Daten Radius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 16 mm Freiwinkel: 7° Winkel: 35° Besonderheiten Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9215 Spanbrecher: PSF (kontrollierte Spangebung) Plattenform: Rhombisch Loch: Mit Loch Lochstil: Zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen Einsatzgebiet: Mittlere Stahlbearbeitung Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Welche Werkstoffe sind für die VCMT160408-PSF T9215 geeignet? Die VCMT160408-PSF T9215 von Tungaloy ist primär für mittlere Stahlbearbeitung ausgelegt und bietet ausgezeichnete Verschleißfestigkeit sowie Bruchsicherheit bei typischen Drehbedingungen. Wie beeinflusst die CVD-Beschichtung die Standzeit? Die CVD-Beschichtung erhöht die Verschleißfestigkeit der Schneidkante, wodurch die Standzeit im Vergleich unbeschichteter Platten deutlich verlängert und die Prozessstabilität verbessert wird. Worauf ist bei der Halterauswahl zu achten? Bei der Auswahl des Halters sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke entscheidend, damit die VCMT160408-PSF T9215 sicher positioniert wird und Vibrationen minimiert bleiben. Für welche Schnittbedingungen eignet sich der Spanbrecher PSF besonders? Der Spanbrecher PSF ist speziell für kontrollierte Spanformung bei kontinuierlichem bis leicht unterbrochenem Schnitt ausgelegt und unterstützt stabile Bearbeitungsprozesse in der mittleren Zerspanung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 160408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance and robust fracture toughness offered by the CVD-coated T9215 grade, together with ISO compatibility for straightforward toolholder selection; order the VCMT160408-PSS insert via Metav Werkzeuge or consult the team for application advice. VCMT 160408 T9215 ISO rhombic indexable insert for turning — Tungaloy, CVD-coated carbide, 0.8 mm radius The VCMT160408-PSS T9215 is an ISO rhombic indexable insert designed for external and internal turning in medium steels, offering a balance of wear resistance and toughness for high-productivity, continuous to lightly interrupted cutting. ISO rhombic insert VCMT160408 for turning CVD-coated carbide grade T9215 for steel 0.8 mm corner radius for stable cutting Centre hole with cylindrical bore and 40°–60° countersink Increased productivity through a durable cutting concept The combination of a CVD-coated surface and a wear-resistant carbide substrate makes this indexable insert particularly suited to medium steel applications. The T9215 grade is formulated to provide a long tool life while maintaining fracture resistance, which translates into fewer interruptions for insert changes and more consistent cycle times on production runs. For shops targeting high throughput with stable machine setup, the insert’s load-bearing capacity helps reduce unscheduled downtime and supports repeatable surface finishes. Secure seating and consistent geometry for accurate turning Compatibility with toolholders is defined by ISO form, 7° relief angle, tolerance class, fastening method, size and thickness; correct matching ensures repeatable results. The rhombic geometry with a 35° main cutting angle and a 0.8 mm corner radius gives a stable cutting edge that balances edge strength and the ability to produce fine contours. The centre hole with a cylindrical bore and one-sided countersink (40°–60°) simplifies clamping on many ISO-standard holders, while the 4.76 mm plate thickness contributes to rigidity in heavy cuts. Practical guidance for selection and application Choose the PSS chipbreaker version to match the intended machining style and material; the chipformer selection affects chip flow and surface quality. The insert functions within a system comprising an ISO indexable insert, a matching outer holder or boring bar, and the necessary shim/clamping sets and replacement screws. It is recommended to pair this insert with holders specified for the VCMT family and to select cutting parameters aligned with stable clamping and minimal vibration for best results in continuous to lightly interrupted cuts. For availability, batch options or application-specific recommendations for the VCMT160408-PSS T9215 from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and prompt supply. Technical data Article number: 6772491 Manufacturer SKU: TUN6772491 SKU: 6772491-Tungaloy Model series: ISO indexable turning inserts Designation: VCMT160408-PSS T9215 Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 16 Relief angle: 7° Main cutting angle: 35° Special features Material: carbide Coating/grade: CVD-coated, T9215 Shape: rhombic Chipbreaker: PSS Hole: with cylindrical bore and one-sided countersink (40°–60°) Application: turning (external and internal) Typical system: ISO insert + compatible outer holder or boring bar + shim/clamping set + replacement screws Best for: medium steel; continuous to slightly interrupted cuts; high productivity and stable cutting FAQ What materials is this insert intended for? The VCMT160408-PSS T9215 insert is optimised for medium steel machining; the CVD-coated T9215 grade combines wear resistance and toughness for productive steel applications. How does the PSS chipbreaker affect machining? The PSS chipbreaker controls chip formation and evacuation; in the VCMT160408-PSS it supports consistent chip flow and surface finish during continuous to lightly interrupted turning. Which toolholder features are essential for compatibility? Compatibility depends on ISO form, the 7° relief angle, tolerance class, fastening type, the 16 size and the 4.76 mm thickness; matching these ensures proper seating and repeatable geometry. What advantages does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases edge strength and vibration resistance, improving tool life and enabling stable cuts where reasonable contour accuracy is required. Is this insert suitable for interrupted cuts? Yes—this grade and geometry are suited to continuous and slightly interrupted cuts; however, heavily interrupted operations may require specific edge preparations or alternative grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 T9215 Wendeplatten - Tungaloy
VCMT 160408 T9215 ISO-Drehwendeschneidplatte fürs Drehen von Tungaloy Die VCMT 160408 T9215 ist eine rhombische ISO-Drehwendeschneidplatte für das Außen- und Innendrehen bei mittlerer Stahlbearbeitung und optimiert für produktive, kontinuierliche bis leicht unterbrochene Schnitte CVD-beschichtetes Hartmetall T9215 Für mittlere Stahlbearbeitung optimiert Rhombische Form 35° für vielseitigen Einsatz Mit Loch und zylindrischer Senkung 40°–60° Eckenradius 0,8 mm für präzise Radiuskontrolle Höhere Produktivität durch verschleißfeste Beschichtung Die rhombische Wendeschneidplatte verfügt über eine CVD-Beschichtung, die den Verschleißwiderstand signifikant erhöht und gleichzeitig Bruchsicherheit bietet. Anwender profitieren von längeren Standzeiten und konstanter Zerspanungsleistung bei mittleren Stahlqualitäten. Die Sorte T9215 ist speziell auf produktives Drehen ausgelegt und ermöglicht höhere Schnittparameter bei stabiler Spanbildung, wodurch die Gesamtdurchlaufzeit in der Fertigung reduziert wird. Präzise Geometrie für reproduzierbare Ergebnisse Die ISO-Normgeometrie sorgt dafür, dass die Platte mit standardisierten Außenhaltern kompatibel ist, sofern Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke passen. Die rhombische Form mit einem Einstellwinkel von 35° und einem Freiwinkel von 7° unterstützt vielseitige Schnittbedingungen. Dank des Eckenradius von 0,8 mm lassen sich definierte Formradien und wiederholgenaue Konturen sicher einhalten, was sich positiv auf die Oberflächengüte auswirkt. Einsatzfelder und Auswahl des Spanformers Die Platte ist für das Außen- und Innendrehen ausgelegt und eignet sich besonders für Werkstattbetriebe und Serienfertigung mit mittleren Stahlwerkstoffen. Der Spanformer TM sorgt für stabile Spanbildung bei kontinuierlichem bis leicht unterbrochenem Schnitt; er ist die richtige Wahl, wenn gleichmäßige Spanabfuhr und Prozesssicherheit gefragt sind. Für wechselnde Bearbeitungsbedingungen empfiehlt sich die Abstimmung von Halter und Schnittwerten auf die jeweilige Werkstückstabilität. Einbaufreundlichkeit und wirtschaftliche Handhabung Die Ausführung mit Loch und zylindrischer Senkung (einseitig 40°–60°) erleichtert die sichere Befestigung und reduziert Rüstzeiten. Mit einer Plattendicke von 4,76 mm und einer Plattengröße von 16 mm lässt sich die Platte bei vielen Standardhaltern einsetzen. Durch die Kombination aus robustem Schneidstoff und durchdachter Geometrie entsteht ein wirtschaftliches Werkzeugkonzept, das sowohl für kleine Serien als auch für längere Produktionsläufe rentable Ergebnisse liefert. Empfehlung: Vertrauen Sie auf die Kombination aus Tungaloy-Qualität und der Sorte T9215 für wirtschaftliche Drehprozesse; bei Fragen zur Werkstückauslegung oder Halterkompatibilität erreicht man die technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6777835 Marke: Tungaloy Serie / Baureihe: ISO-Drehwendeschneidplatten Bezeichnung: VCMT160408-TM T9215 Herstellersku: TUN6777835 Fakten Eckenradius: 0,8 mm Winkel: 35° Freiwinkel: 7° Plattendicke: 4,76 mm Plattengröße: 16 mm Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD: dünne, verschleißfeste Schicht) Sorte: T9215 (hoher Verschleißwiderstand, gute Bruchsicherheit) Spanformer: TM (stabile Spanbildung) Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Einsatz: Drehen; Außen- und Innendrehen; mittlere Stahlbearbeitung; hohe Produktivität bei kontinuierlichem bis leicht unterbrochenem Schnitt FAQ Für welche Werkstoffe ist die Wendeschneidplatte geeignet? Die VCMT160408-TM T9215 von Tungaloy ist primär für mittlere Stahlqualitäten ausgelegt und bietet dort hohe Prozesssicherheit und Standzeit; die Sorte T9215 verbindet Verschleißwiderstand mit Bruchsicherheit. Welche Rolle spielt der Spanformer TM? Der Spanformer TM optimiert die Spanformung für stabile, kontrollierte Späne; bei der VCMT160408-TM T9215 sorgt er für sichere Spanabfuhr und konstante Zerspanungsbedingungen. Wie beeinflusst das Loch und die Senkung die Montage? Das Loch mit zylindrischer Ausführung und einseitiger Senkung (40°–60°) ermöglicht eine formschlüssige und wiederholgenaue Befestigung in passenden Haltern und reduziert Montagefehler bei Rüstvorgängen. Ist die Platte für unterbrochene Schnitte geeignet? Ja, die T9215-Sorte ist für kontinuierliche bis leicht unterbrochene Schnitte optimiert und bietet dabei eine ausgewogene Mischung aus Verschleißwiderstand und Zähigkeit. Welche Geometriewerte sind für die Halterauswahl entscheidend? Für die Kompatibilität sind Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke maßgeblich; bei der VCMT160408-TM T9215 sind insbesondere Freiwinkel 7° und Plattendicke 4,76 mm zu berücksichtigen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T9215 and the TSF chipbreaker to boost throughput and maintain stable tool life in medium-steel turning. The ISO format and clear dimensional data ensure straightforward integration with compatible holders; order directly via Metav Werkzeuge or consult the team for application support. VCMT160408-TSF T9215 — VCMT 160408 ISO indexable turning insert for turning, Tungaloy VCMT160408-TSF T9215 is an indexable insert engineered for efficient medium-steel turning, combining a CVD-coated carbide grade with a TSF chipbreaker ISO indexable insert VCMT160408-TSF T9215 CVD-coated carbide grade for medium steel TSF chipbreaker for continuous to light interrupted cuts 0.8 mm corner radius, 7° clearance angle Productivity through durable CVD-coated carbide and optimised chip control The CVD-coated cemented carbide grade T9215 pairs high wear resistance with good fracture toughness, making it a reliable choice for sustained production on medium steels. The TSF chipbreaker is designed to form consistent chips under continuous to lightly interrupted cuts, reducing stoppages from chip-related issues and supporting higher metal removal rates. Because the insert is ISO‑standard, the mechanical interface is predictable: compatibility with a given holder is determined by insert form, clearance angle, tolerance class, fastening type, size and thickness, which simplifies tool selection and inventory management. Consistent accuracy and improved surface quality with compact geometry The rhombic geometry and 0.8 mm corner radius deliver a favourable balance between cutting strength and surface finish. A 7° clearance angle reduces rubbing at the flank face, which helps maintain dimensional accuracy across the workpiece and extends insert life. The insert’s geometry—including the 35° included angle and the TSF chip control—supports repeatable results on external and internal turning operations, translating technical specifications into measurable benefits: fewer reworks, predictable cycle times and an improved first-pass yield. System-ready design and application guidance for turning operations Supplied as an ISO indexable plate with a cylindrical centre hole and single-sided countersink (40°–60°), the insert fits into standard clamping systems alongside an appropriate outer holder or boring bar, shim/clamp set and replacement screws. For typical applications the grade performs best on medium steels under continuous to light intermittent cutting; for heavily interrupted cuts or exotic alloys, consider alternative grades or reinforced geometries. The product data supports rapid process decisions: insert size 16, thickness 4.76 mm, and an accessible designation that links directly to tooling charts and holder catalogues, reducing setup time and increasing machine uptime. Contact Metav Werkzeuge for application advice and to request Tungaloy VCMT160408-TSF T9215 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6777794 SKU: 6777794-Tungaloy Manufacturer SKU: TUN6777794 Designation: VCMT160408-TSF T9215 Series: ISO indexable turning inserts Type: Insert for turning Core specifications Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 35° Features / Special characteristics CVD-coated carbide (grade T9215) TSF chipbreaker Rhombic insert shape Cylindrical hole + single-sided countersink (40°–60°) Application: turning (external and internal) Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness FAQ Is this insert suitable for continuous turning of medium steel? Yes. The VCMT160408-TSF T9215 insert is specifically developed for medium-steel turning and performs well under continuous and light interrupted cutting conditions. What does the TSF chipbreaker provide? The TSF chipbreaker on this insert promotes controlled chip formation in continuous to lightly interrupted cuts, improving process stability and reducing the likelihood of chip entanglement. Which holders accept this ISO insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; the VCMT160408-TSF conforms to ISO dimensions and will fit matching VCMT holders and boring bars from standard tooling ranges. How is the designation VCMT160408-TSF T9215 interpreted? VCMT denotes the rhombic insert form with a 35° included angle; 160408 indicates nominal size and geometry, 0.8 mm corner radius; TSF identifies the chipbreaker style; T9215 is the CVD-coated carbide grade. Can this insert be used for interrupted cuts? It is optimised for continuous to light interrupted cuts; for heavy interruptions or highly unstable setups, consider a tougher grade or a different insert geometry better suited to shock resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 T9215 Wendeplatten - Tungaloy
Take advantage of CVD‑coated carbide in the T9215 grade combined with a 0.8 mm corner radius and ISO compatibility for reliable, productive turning operations; order the insert directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. VCMT160408 T9215 ISO turning insert — rhombic geometry, CVD‑coated carbide by Tungaloy VCMT160408 T9215 is an ISO‑standard turning insert designed for medium steel machining and compatible with ISO holders for a broad range of external and internal turning tasks CVD‑coated carbide for medium steel Rhombic 35° geometry for versatile turning 0.8 mm corner radius for robust edge life With hole and single‑side countersink (40°–60°) Efficient performance for continuous and light interrupted cuts The CVD‑coated carbide grade T9215 is engineered for a balance of wear resistance and fracture toughness, enabling high productivity in continuous and lightly interrupted turning. The coating provides a hard, wear‑resistant surface that extends tool life under steady cutting conditions, while the substrate maintains edge stability. For production environments where consistent cycle times matter, this combination reduces downtime from frequent insert changes and supports predictable process windows. The insert’s rhombic geometry and defined relief promote stable chip flow and repeatable results on a range of steels. Geometry and edge design that support reliable machining Rhombic shape with a 35° approach angle and a 0.8 mm corner radius translates into a compromise between strength and finish: the larger edge radius increases resistance to edge chipping, while the geometry still allows acceptable surface quality in many turning operations. The single‑sided countersink and central hole ensure secure clamping and straightforward indexation in ISO holders. When combined with an appropriately matched chipbreaker (24) and cutting parameters, this insert helps achieve consistent dimensional accuracy with reduced vibration and improved process stability. Compatibility, application guidance and practical benefits Designed as an ISO turning insert, it fits standard external and internal holders provided the holder’s form, relief angle, tolerance class, fastening method, size and thickness match the insert specification. Select the chipbreaker and grade according to workpiece material and cutting conditions; T9215 is the preferred choice for mid‑range steel machining where longevity and productivity are priorities. Using a correctly set up holder and recommended cutting data results in fewer tool‑changes, predictable surface quality and lower unit costs in serial production. Brief technical explanation for non‑specialists In simple terms, a CVD‑coated carbide insert combines a very hard coating with a tough carbide core. The coating reduces abrasive wear, while the core absorbs cutting forces without breaking easily. The 0.8 mm corner radius strengthens the cutting edge against impacts and provides a balance between edge life and the achievable surface finish. ISO‑compliant form and size make the insert straightforward to replace within existing tool systems, simplifying procurement and inventory management. For application support or to source genuine Tungaloy VCMT160408 T9215 inserts, contact Metav Werkzeuge for tailored advice and rapid delivery; our technical team can recommend the optimal grade and chipbreaker for specific turning tasks Technical data Article number: 6774055 SKU: 6774055-Tungaloy Manufacturer SKU: TUN6774055 Model series: ISO turning inserts Material: carbide Coating / grade: T9215 (CVD‑coated) Application: Turning Numbers / Core technical data ISO designation: VCMT160408-24 Size: 16 mm Thickness: 4.76 mm Relief angle: 7° Wedge / approach angle: 35° Corner radius: 0.8 mm Chipbreaker: 24 Designs / Special features Rhombic insert form With hole; cylindrical hole + single‑side countersink (40°–60°) Compatible with ISO‑standard holders and clamping sets Suitable for external and internal turning CVD coating for extended wear resistance FAQ What materials is this insert best suited for? The VCMT160408 T9215 insert is formulated for machining medium steels; the CVD‑coated carbide grade T9215 offers a good balance of wear resistance and toughness for continuous to lightly interrupted steel turning. How does the 0.8 mm corner radius affect tool life and finish? A 0.8 mm corner radius increases edge strength and resistance to chipping, improving insert life under stable cutting conditions; surface finish remains acceptable for general turning tasks when feeds and speeds are selected accordingly. Is this insert compatible with existing ISO toolholders? Yes, the VCMT160408‑24 follows ISO dimensions and clamping features; compatibility depends on matching the holder’s form, relief angle, tolerance class, fastening method, size and thickness to the insert specification. Can the insert handle interrupted cuts? The T9215 grade is suitable for continuous and lightly interrupted cuts; for heavily interrupted applications, a grade with higher toughness or different geometry may be preferable. What is the advantage of the CVD coating on this insert? CVD coating provides a hard, wear‑resistant surface that reduces abrasive wear and helps maintain cutting performance over longer production runs while retaining the toughness of the carbide substrate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VCMT 160408 T9225 Wendeplatten - Tungaloy
Combining a CVD-coated carbide substrate, the robust universal T9225 grade and an ISO rhombic form with a 0.8 mm nose radius, this insert delivers dependable performance for medium to heavy steel turning. Order the VCMT160408-PS T9225 insert directly via Metav Werkzeuge or consult their specialists for application advice. VCMT160408-PS T9225 (VCMT 160408 T9225) — ISO turning insert, CVD-coated carbide, 0.8 mm radius (Tungaloy) A VCMT160408-PS T9225 indexable insert engineered for ISO-compatible external and internal turning in medium to heavy steel applications CVD-coated carbide grade T9225 Robust universal grade for medium–heavy steel 0.8 mm nose radius for consistent profile ISO rhombic insert with 7° clearance angle Consistent cutting performance for medium–heavy steels The CVD-coated carbide T9225 grade provides a balance of toughness and wear resistance tailored to demanding turning where variable engagement and light interruptions occur. The CVD-coated carbide layer increases resistance to built-up edge and abrasion, while the substrate maintains edge stability under load. This combination supports longer cutting times and fewer index changes, resulting in improved process reliability and reduced non-productive time. The insert’s 0.8 mm nose radius helps sustain accurate profiles without sacrificing edge strength, making it suitable for robust component machining in series production or small-batch work. Seamless ISO integration for rapid set-up Designed to ISO dimensions and a rhombic geometry, the insert fits into standard holders when matched by form, clearance, tolerance class, attachment and thickness. Key dimensional data—16 mm size and 4.76 mm thickness—simplify holder selection, while the 7° clearance and the 35° approach angle ensure predictable cutting engagement. The insert features a cylindrical hole with a single-sided countersink (40°–60°), enabling secure fastening and repeatable clamping. Choosing the PS chipbreaker variant aligns chip control to general turning tasks; selecting the correct chipformer and compatible holder reduces mounting errors and shortens set-up times on the shop floor. Better economy through controlled chips and durable edge life By pairing effective chip control with a robust substrate, the insert supports steady material removal rates and a consistent surface finish. The PS chipbreaker promotes manageable chips in a wide range of steel turning scenarios, which helps to protect the toolholder and workpiece from erratic chip flow. The insert is intended to be used as part of a system—indexable insert plus appropriate external holder or boring bar, underlay/clamp set and replacement screws—to maintain process stability. The result is predictable tool life and fewer unplanned interventions, increasing production efficiency and operator confidence. For reliable medium-to-heavy steel turning choose genuine Tungaloy VCMT160408-PS T9225 inserts — contact Metav Werkzeuge for availability and expert advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6781068 Manufacturer SKU: TUN6781068 Label: VCMT160408-PS T9225 Model series: ISO turning indexable inserts Material: Carbide Grade: T9225 Chipbreaker: PS Application: Turning Manufacturer: Tungaloy Dimensions & Core Figures Size: 16 mm Thickness: 4.76 mm Nose radius: 0.8 mm Clearance angle: 7° Approach angle: 35° Design & Special Features Rhombic plate form Cylindrical hole + single-sided countersink (40°–60°) CVD-coated carbide substrate ISO-standard designation VCMT160408-PS System components: insert + outer holder/boring bar + clamp set + replacement screws FAQ What materials is this insert suitable for? The VCMT160408-PS T9225 insert is intended primarily for medium to heavy steel turning; the T9225 grade and PS chipbreaker are selected for robust performance under varying engagement and lightly interrupted cuts. How does the PS chipbreaker affect machining? The PS chipbreaker on this indexable insert promotes controlled chip formation across typical turning operations, improving chip evacuation and reducing the risk of chip interference with the toolholder. Which holders are compatible with the insert? Compatibility depends on holder form, clearance angle, tolerance class, attachment method, size and thickness; the insert’s ISO rhombic form and dimensions (16 mm × 4.76 mm) match standard holders designed for VCMT-style plates. What does the T9225 designation signify? T9225 identifies the carbide grade and coating concept: a CVD-coated carbide blend optimised for a balance of toughness and wear resistance in medium to heavy steel machining. Is the insert suitable for internal turning? Yes, the insert’s geometry and chip control features make it appropriate for both external and internal turning when used with a suitable boring bar or internal holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD-coated carbide grade that balances toughness and wear resistance with the versatility of an ISO-standard, rhombic insert; order directly via Metav Werkzeuge or request a compatibility check from the consultants for seamless integration into existing turning operations. VCMT160408-TM T9225 — ISO turning insert, CVD-coated carbide, Tungaloy A compact ISO turning insert, VCMT160408-TM T9225, engineered for medium to heavy steel turning and interrupted cuts where increased toughness is required. CVD-coated carbide grade T9225 ISO-standard rhombic insert VCMT160408 TM chipbreaker optimised for steel Consistent cutting performance for steel turning The combination of a CVD-coated surface and a tough carbide substrate in grade T9225 provides reliable wear resistance while retaining the fracture toughness needed for interrupted cuts and varying engagement conditions. This balance reduces the risk of edge chipping when machining medium to heavy steel, enabling steadier cycle times and fewer tool changes. The result is measurable process stability and an improved cost-per-part ratio without compromising cutting performance. Secure mounting and ISO interchangeability for workshop flexibility Designed to the ISO series specifications, the insert offers predictable compatibility with matching holders: form, clearance angle, tolerance class, fastening method, size and thickness determine correct fit. The rhombic geometry with a 35° cutting angle and a cylindrical hole with a single-sided countersink (40°–60°) supports positive screw clamping and simple indexability. This standardisation simplifies stocking and reduces set-up time across multiple lathes or turning centres. Improved chip control and surface quality through the TM chipbreaker The TM chipbreaker is tailored for steel applications and encourages controlled chip formation under a range of feeds and depths. Enhanced chip control decreases rework and machine stoppages while promoting a consistent surface finish, particularly when paired with a rigid toolholder and correct cutting parameters. Choose the chipbreaker and grade to match the workpiece material and machining stability for optimal results. Practical selection notes for lasting productivity A 0.8 mm nose radius offers a practical compromise between profile accuracy and edge strength for general turning tasks. The insert thickness of 4.76 mm and a 7° clearance angle contribute to robust support in the pocket and improved resistance to bending under heavy cuts. For best longevity, combine the insert with a suitable external holder or boring bar, the correct clamping set and the specified fastening screws; this ensures repeatable positioning and reduced vibration during operation. For ordering, application advice or a compatibility check with existing toolholders, contact Metav Werkzeuge — request a quote or technical support by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6781504 SKU: 6781504-Tungaloy Manufacturer SKU: TUN6781504 Model series: ISO-Drehwendeschneidplatten WPL designation: VCMT160408-TM WPL article name: VCMT160408-TM T9225 Facts Nose radius: 0.8 mm Insert size: 16 mm Thickness: 4.76 mm Clearance angle: 7° Cutting angle: 35° Hole: with hole Special features Grade/coating: T9225 (CVD-coated carbide) Chipbreaker: TM Shape: rhombic Hole style: cylindrical hole + single-sided countersink (40°–60°) Application: turning Material: carbide ISO-standard insert for compatible holders FAQ What materials is this insert suited for? The VCMT160408-TM T9225 insert is specified for medium to heavy steel turning; the CVD-coated carbide grade T9225 offers toughness for varying engagement and light interruptions. How does the TM chipbreaker affect machining? The TM chipbreaker on the VCMT160408-TM T9225 promotes controlled chip formation for steel, improving chip evacuation and contributing to a more consistent surface finish. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and pocket dimensions; the ISO designation simplifies selection for matching VCMT160408 holders. What does the 0.8 mm nose radius mean for part quality? A 0.8 mm nose radius provides a balance between edge strength and profile definition, improving tool life on heavier cuts while maintaining acceptable contour accuracy. What is the manufacturer SKU and article number? Manufacturer SKU TUN6781504 and article number 6781504 identify this specific VCMT160408-TM T9225 insert for ordering and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a robust CVD-coated carbide grade and a proven PSF chipbreaker for dependable medium–heavy steel turning; precise ISO geometry ensures straightforward holder compatibility. Order genuine inserts directly via Metav Werkzeuge or consult our specialists for selection and process optimisation. VCMT160408-PSF T9225 — ISO turning insert for medium–heavy steel, Tungaloy The VCMT160408-PSF T9225 is an ISO-standard rhombic turning insert engineered for external and internal turning where intermittency or variable engagement demands higher toughness and reliable chip control CVD-coated carbide grade T9225 Robust universal grade for medium–heavy steel Rhombic insert VCMT with 7° clearance Cylindrical hole with single‑side countersink Stable cutting performance under varying conditions The CVD-coated carbide grade T9225 is formulated as a robust universal grade for demanding machining. With a CVD-coated surface it combines wear resistance with a degree of toughness that copes well with interrupted cuts and changing engagement, so the indexable insert maintains cutting edge integrity over longer cycles. The presence of the PSF chipbreaker improves chip control in typical steel applications, reducing the risk of chip-related interruptions and supporting a more predictable cycle time. This focus on controlled wear translates into fewer insert changes and steadier productivity on the shop floor. Precision geometry for straightforward holder compatibility Engineered to ISO dimensions, the insert features a rhombic geometry with a 0.8 mm corner radius, a 7° relief and a plate thickness of 4.76 mm, facilitating accurate seat and clamp fit in standard holders and boring bars. The designation VCMT160408-PSF indicates the form and sizing to match ISO tooling systems, while the cylindrical hole with a single‑side countersink (40°–60°) ensures secure fastening and repeatable positioning. Because compatibility depends on shape, relief angle, tolerance class, fixation, size and thickness, using ISO-compliant plates simplifies integration and reduces setup time when changing tools. Productivity and process security in everyday turning By combining a universal carbide grade with an effective chipformer, this indexable plate supports stable cutting regimes across a range of steel grades. The result is a measurable improvement in process security: reduced unplanned stoppages, fewer tool changes and more consistent surface finishes. From an economic perspective, longer tool life and predictable wear behaviour help to lower total machining costs per component. The design is particularly well suited to workshops seeking robust, repeatable results without excessive tool management overhead. System advice and recommended use A reliable turning system is more than the insert alone: typical setups comprise the ISO insert, a suitable external holder or boring bar, a shim or clamp set and replacement fastening screws. For best results, match the PSF chipbreaker and the T9225 grade to the workpiece material and the stability of the clamping arrangement. The insert is intended primarily for turning operations on steel in medium to heavy cuts; selecting the correct holder rigidity and cutting parameters will maximise both tool life and part quality. If process parameters vary or materials change frequently, the universal character of this grade offers flexibility while maintaining safety margins. For personalised advice on selecting Tungaloy VCMT160408-PSF T9225 inserts or to secure supply through Metav Werkzeuge, contact our consultants at Metav Werkzeuge for fast, application-oriented support. Technical Data Manufacturer item number: 6781021 SKU: 6781021-Tungaloy Manufacturer SKU: TUN6781021 Designation: VCMT160408-PSF T9225 Facts Corner radius: 0.8 mm Relief/clearance angle: 7° Plate thickness: 4.76 mm ISO code: 160408 Included hole: with cylindrical hole + single‑side countersink (40°–60°) Special features Coating: CVD-coated carbide Grade: T9225 Chipbreaker: PSF Shape: rhombic (VCMT) Typical application: turning (external and internal) System composition: ISO insert + matching holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The VCMT160408-PSF T9225 is optimised for medium–heavy steel turning; the T9225 grade and PSF chipbreaker deliver robust performance under interrupted or variable cuts. How does the PSF chipbreaker affect machining? The PSF chipbreaker on the insert improves chip control and evacuation during turning, helping to maintain consistent cutting conditions and reducing the likelihood of chip-related interruptions. Which holders are compatible with this ISO insert? Compatibility requires a holder that matches the ISO VCMT160408 form, the 7° relief, and the plate thickness of 4.76 mm; use appropriately rated external holders or boring bars for secure clamping. Can this insert be used for internal turning? Yes; the ISO geometry and secure fastening via the cylindrical hole with countersink make it suitable for both external and internal turning operations when paired with the correct holder. What is the manufacturer SKU for ordering? Order using the manufacturer item number 6781021 or SKU 6781021-Tungaloy to ensure genuine Tungaloy VCMT160408-PSF T9225 inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide and robust T9225 grade to achieve stable, productive turning in medium-to-heavy steel operations; the 0.8 mm corner radius and rhombic geometry improve cutting security and surface quality. Order the VCMT160408-TSF T9225 directly via Metav Werkzeuge or ask our consultants if needed. VCMT160408-TSF T9225 ISO turning insert for medium-to-heavy steel turning by Tungaloy The VCMT160408-TSF T9225 is an ISO‑standard rhombic turning insert designed for external and internal turning in variable engagement conditions, delivering toughness and consistent performance for interrupted or heavy cuts. ISO‑standard rhombic insert, 16 mm size CVD‑coated carbide grade T9225 0.8 mm corner radius for robust cuts Cylindrical hole with one‑sided countersink Stable cutting performance for demanding steel turning The CVD‑coated carbide substrate in grade T9225 is engineered for medium‑to‑heavy steel turning, offering a balance of toughness and wear resistance where changing engagement or light interruptions occur. The coated surface reduces adhesion and improves thermal stability, which leads to fewer unscheduled tool changes and a steadier production rhythm. Compatibility with toolholders follows the ISO system, determined by form, clearance, tolerance class, fastening, size and thickness, permitting predictable integration into existing tooling setups. Reliable chip control and secure clamping for consistent finishes The TSF chipbreaker promotes controlled chip formation across a range of cutting conditions, reducing the risk of long, entangling chips and aiding evacuation. The insert’s rhombic shape and 35° cutting angle contribute to accessible cutting geometry for both profiling and light turning passes, while the cylindrical hole with one‑sided countersink (40°–60°) ensures secure clamping and repeatable positioning. With a 4.76 mm plate thickness and 0.8 mm corner radius, the geometry combines rigidity with edge strength to support improved surface quality and process stability. System approach that supports productivity and predictable tool life The insert is part of an ISO system that comprises the indexable plate, a matching external holder or boring bar, a shim/clamp set and spare fixing screws; this modularity simplifies logistics and reduces changeover time on the shop floor. Selecting the correct chipbreaker and grade according to workpiece material and machining stability maximises tool life and lowers unit cost per part. For production environments and job shops seeking process security and repeatable results, the combination of the T9225 grade and TSF geometry delivers consistent machining with reduced downtime. For grade selection, compatibility checks or to arrange prompt supply of Tungaloy turning inserts, contact Metav Werkzeuge for expert advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6781476 SKU: 6781476‑Tungaloy Manufacturer SKU: TUN6781476 Model series: ISO turning indexable inserts Label: VCMT160408‑TSF T9225 Core technical data Shape: Rhombic Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 7° Cutting edge angle: 35° Hole: cylindrical + one‑sided countersink (40°–60°) Special features Material: carbide Coating: CVD Grade: T9225 Chipbreaker: TSF Application: turning (external and internal) Compatibility: ISO holders by form, clearance, tolerance, fastening, size, thickness FAQ What workpiece materials is this insert intended for? The VCMT160408‑TSF T9225 is optimised for steel machining; the T9225 grade provides toughness suitable for medium‑to‑heavy steel turning and operations with variable engagement. How does the TSF chipbreaker affect chip behaviour? The TSF chipbreaker on the Tungaloy insert promotes smaller, controllable chips and aids evacuation, which improves surface finish and reduces the likelihood of chip interference during turning. Which holder features must be matched to ensure compatibility? Compatibility depends on the insert form, clearance, tolerance class, fastening method, size and thickness; matching these to the holder or boring bar ensures secure clamping of the VCMT160408‑TSF T9225. Is the insert suitable for interrupted cuts? Yes, the CVD‑coated carbide grade T9225 is designed to offer increased toughness for lightly interrupted or variable cuts in steel turning operations. What system components are recommended for installation? A complete ISO system for this insert includes a compatible external holder or boring bar, a shim/clamp set and the correct replacement screws to secure the plate reliably. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160408 T9225 Wendeplatten - Tungaloy
Take advantage of a proven combination of CVD-coated carbide and a robust universal grade (T9225) to maintain productivity in medium-to-heavy steel turning; the ISO rhombic format simplifies tool stocking and rapid changeover. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. VCMT 160408 T9225 – VCMT160408-24 T9225 ISO turning insert (Tungaloy) VCMT160408-24 T9225 is an ISO rhombic turning insert designed for medium-to-heavy steel machining and applications with intermittent cuts CVD-coated carbide for extended tool life Robust universal grade T9225 for steel turning ISO rhombic 160408 format for easy replacement 0.8 mm nose radius and 7° relief angle Consistent performance under varying cut conditions The VCMT160408-24 T9225 indexable insert is engineered as a robust universal grade for medium-to-heavy steel turning, offering a balance of toughness and wear resistance suited to interrupted cuts and changing engagement. The combination of a CVD coating and a carbide substrate provides improved thermal stability and abrasion resistance, which reduces flank wear and extends service intervals. For production environments, this translates into fewer insert changes, steadier cycle times and predictable tool-life behaviour, supporting reliable throughput and lower total machining costs. ISO compatibility that reduces downtime and simplifies inventory Being an ISO-formatted rhombic insert (VCMT 160408), the design ensures interchangeability with common toolholders when form, relief angle, tolerance class, clamping and thickness match. The 16 mm size, 4.76 mm thickness and the cylindrical hole with single-sided countersink (40°–60°) support secure clamping and straightforward replacement. Standardised geometry helps minimise changeover time and reduces the variety of spare parts required in the tooling cabinet, which is particularly valuable for job shops and production lines aiming for efficient logistics and quick setup. Coating and substrate explained for predictable durability The CVD coating applied to this carbide insert enhances resistance to abrasive wear and improves performance at elevated cutting temperatures. Unlike some surface-only treatments, CVD layers bond metallurgically with the carbide, offering a durable barrier that preserves the cutting edge under sustained loads. The T9225 grade is specified as a universal, tougher option: it favours stability over the absolute maximum hardness, making it suitable where edge security during slight interruptions or variable feeds is critical. The result is more consistent surface finish and longer intervention intervals in mixed production runs. Practical selection: nose radius, chipbreaker and application fit The 0.8 mm nose radius contributes to improved part finish and stronger edge geometry compared with finer radii, while the 7° relief angle helps to balance cutting forces and reduce rubbing on the flank. The fitted chipbreaker 24 is intended to control chip formation in typical steel turning operations; matching chipbreaker style and grade to the workpiece material and machine rigidity is essential for optimal results. For unstable set-ups or heavily interrupted cuts, the chosen robust grade and chip control help avoid premature chipping. When in doubt about the combined choice of grade, chipbreaker and holder, consult a tooling specialist to tune parameters to the specific machine and workpiece. Contact Metav Werkzeuge for tailored selection, availability and batch supply; email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and order processing Technical data Article number: 6781097 SKU: 6781097-Tungaloy Manufacturer SKU: TUN6781097 Model series: ISO turning inserts ISO designation: VCMT160408-24 Material: carbide Grade/coating: T9225, CVD-coated Numbers Nose radius: 0.8 mm Thickness: 4.76 mm Inscribed circle/size: 16 mm Relief angle: 7° Included angle / main angle: 35° Chipbreaker: 24 Special features Rhombic insert shape (VCMT) Cylindrical hole with single-sided countersink (40°–60°) ISO-compatible geometry for holders and boring bars Robust universal grade for medium-to-heavy steel turning Designed for external and internal turning applications Suitable for intermittent cuts and varying engagement conditions FAQ What materials is this insert intended for? The VCMT160408-24 T9225 insert (Tungaloy, ISO turning insert, SKU 6781097-Tungaloy) is primarily specified for steel machining, particularly in medium-to-heavy operations where toughness and stable chip control are required. How does the T9225 grade differ from harder grades? T9225 is a robust universal grade with a focus on toughness and reliable edge security; it sacrifices some maximum wear resistance in favour of better performance under interrupted cuts and variable engagement compared with harder, more brittle grades. Is this ISO insert compatible with standard toolholders? Yes; the VCMT 160408 geometry conforms to ISO rhombic standards. Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness—matching these parameters ensures correct seating and secure clamping. What advantage does the 0.8 mm nose radius offer? A 0.8 mm radius gives a stronger cutting edge and improved surface finish versus finer radii; it also distributes cutting forces over a slightly larger area, which is beneficial for roughing and semi-finishing in steel. What does chipbreaker 24 indicate? The chipbreaker designation denotes the chip control geometry tailored to the T9225 grade and typical steel applications; it is designed to produce manageable chips and stable cutting under the intended feed and depth conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160412 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant PVD-coated carbide, predictable chip control and a robust 1.2 mm corner radius for steady, productive turning of heat-resistant alloys and hard materials; order through Metav Werkzeuge or consult their technical advisers for holder compatibility and application advice. VCMT 160412 AH8005 – ISO rhombic turning insert, PVD-coated carbide (Tungaloy) A VCMT160412 AH8005 rhombic ISO turning insert for stable external and internal turning of heat-resistant alloys and hard materials PVD-coated carbide for wear resistance CM chipbreaker for controlled chip formation 1.2 mm corner radius for robust edges ISO rhombic VCMT160412 with central hole Consistent performance with a heat-resistant carbide grade The PVD-coated carbide grade AH8005 offers improved wear resistance at elevated cutting temperatures, making it suitable for machining heat-resistant alloys and other demanding materials. The coating reduces adhesive and abrasive wear during prolonged cuts, resulting in more predictable tool life and fewer interruptions to the machining cycle. For stable setups and steady cutting conditions the grade is optimised to balance toughness and hardness for productive turning operations. Geometry that enhances stability and surface quality The VCMT160412 rhombic shape combines a compact footprint with a 1.2 mm corner radius, which provides a robust cutting edge for interrupted cuts and heavier depths of cut. The CM chipbreaker promotes segmented, controllable chips that reduce the risk of entanglement and improve swarf evacuation, while the 7° clearance angle helps maintain a positive cutting geometry with reduced rubbing. The insert’s central hole and one-sided countersink (40°–60°) ensure secure clamping and simple orientation in compatible holders, supporting consistent surface finish and dimensional repeatability. Systematic selection for reliable process integration As part of an ISO insert system, the component works together with a matchingholder or boring bar, underlay/clamping set and replacement screws; compatibility depends on form, clearance, tolerance class, fastening method, size and thickness. The insert’s PVD-coated carbide body and chipformer combination support reproducible cutting results and reduced rework. For focused productivity gains, select the chipbreaker and grade to match the workpiece material and the machine’s rigidity; Metav Werkzeuge’s technical advisers are available to clarify suitability and recommend the correct holder and clamping items. For high-temperature turning with reliable tool life and controlled chips, contact Metav Werkzeuge for application advice and to request the Tungaloy VCMT160412 AH8005 insert or matching holders — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6747806 Manufacturer SKU: TUN6747806 SKU: 6747806-Tungaloy Label: VCMT160412 AH8005 ISO designation: VCMT160412 Material: Cemented carbide Grade/coating: AH8005, PVD-coated Core data Corner radius: 1.2 mm Clearance angle: 7° Insert size: 16 mm Thickness: 4.76 mm Included angle / geometry: 35° Countersink angle range: 40°–60° Features and applications Rhombic insert form CM chipbreaker for controlled chips Central hole with cylindrical bore and one-sided countersink Suitable for turning (external and internal) Optimised for heat-resistant alloys and hard materials Part of ISO insert system; compatibility determined by form, clearance, tolerance, fastening, size and thickness FAQ Is this insert suitable for machining heat-resistant alloys? The Tungaloy VCMT160412 AH8005 insert is designed for heat-resistant alloys and hard materials; the PVD-coated AH8005 grade improves wear resistance under elevated temperatures. Which chip behaviour can be expected with this chipbreaker? The CM chipbreaker on this insert produces segmented, controllable chips that aid swarf evacuation and reduce chip entanglement during turning. What holders are compatible with this insert shape? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; the ISO rhombic form and central hole match standard ISO-compatible external holders and boring bars. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius provides a robust cutting edge that tolerates intermittent cuts and higher feed forces, improving edge life and minimising edge chipping. Are countersunk holes suitable for secure clamping? The insert’s cylindrical hole with a one-sided countersink (40°–60°) ensures reliable clamping and repeatable orientation in appropriately designed clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT 160412 AH8015 Wendeplatten - Tungaloy
VCMT 160412 AH8015 ISO-Drehwendeschneidplatte für Drehen von Tungaloy VCMT 160412 AH8015 ist eine ISO-genormte Drehwendeschneidplatte, konzipiert für das Außen- und Innendrehen hitzebeständiger Legierungen im industriellen Einsatz ISO-genormte rhombische Platte, 16 mm PVD-beschichtetes Hartmetall, Sorte AH8015 Geeignet für hitzebeständige Legierungen Eckenradius 1,2 mm für stabile Schneidkante Mit zylindrischem Loch und einseitiger Senkung Produktivität und Standzeit für hitzebeständige Legierungen erhöhen Die VCMT 160412 AH8015 kombiniert PVD-Beschichtung mit verschleißfestem Hartmetall, wodurch eine ausgewogene Balance zwischen Verschleißfestigkeit und Schneidkantenstabilität erzielt wird. Diese Kombination ermöglicht konstante Zerspanungsleistung bei thermisch anspruchsvollen Werkstoffen und reduziert Stillstandzeiten durch selteneren Plattenwechsel. Für Anwender bedeutet das messbare Produktivitätsvorteile und eine verlässlichere Fertigungsplanung. Einfache Auswahl und Systemkompatibilität für den Werkstattalltag ISO-genormte Geometrien sorgen dafür, dass die Platte mit gängigen Außenhaltern, Bohrstangen und Klemmsätzen kompatibel ist. Die Kompatibilität richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; diese Parameter bestimmen Sitz und Stabilität im Halter. Wer die passende Kombination auswählt, profitiert von reproduzierbaren Ergebnissen und geringerem Ausschuss, da Sitz und Auflagekräfte optimiert sind. Technik verständlich erklärt: Was Anwender wissen sollten Der Eckenradius von 1,2 mm beeinflusst die Schnittkräfte und die Oberflächenqualität; ein größerer Radius erhöht die Standzeit bei stabiler Bearbeitung, während ein kleinerer Radius feineres Finish erlaubt. Der Spanbrecher CM ist für allgemeine Schrupp- und Schlichtoperationen ausgelegt und unterstützt kontrollierte Spanbildung bei variierenden Schnittbedingungen. Die PVD-Beschichtung bildet eine dünne, harte Schicht, die die Wärmebeständigkeit verbessert und die Schneidkante gegen Abrieb schützt. Empfohlene Anwendungen und Zielgruppen Die Wendeschneidplatte richtet sich an Lohnfertiger, Serienfertiger und Unternehmen der Luftfahrt- und Energiebranche, die hitzebeständige Legierungen bearbeiten. Sie passt besonders dort, wo eine Kombination aus Standzeit, Prozesssicherheit und guter Oberflächengüte gefordert ist. Durch das ISO-System ist die Platte auch für Betriebe geeignet, die auf standardisierte, schnell verfügbare Werkzeuge setzen. Empfehlung: Für produktive Bearbeitung hitzebeständiger Legierungen die VCMT 160412 AH8015 von Tungaloy über Metav Werkzeuge anfragen – eMail: info@metav-werkzeuge.com | Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6747807 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VCMT160412 AH8015 SKU: 6747807-Tungaloy Daten Eckenradius: 1,2 mm Winkel: 35° Freiwinkel: 7° Plattendicke: 4,76 mm Plattengröße: 16 mm Besonderheiten Material: Hartmetall Beschichtung: PVD-Beschichtung (dünne Verschleißschicht) Sorte: AH8015 Spanbrecher: CM Plattenform: rhombisch Loch: mit Loch — zylindrisches Loch + einseitige Senkung (40°–60°) Anwendung: Drehen FAQ Welche Werkstoffe bearbeitet die Platte primär? Die VCMT 160412 AH8015 von Tungaloy ist für die Bearbeitung hitzebeständiger Legierungen optimiert und zeigt dort ein ausgewogenes Verhältnis aus Standzeit und Schneidkantenstabilität. Welche Vorteile bietet die PVD-Beschichtung? Die PVD-Beschichtung der VCMT 160412 AH8015 erhöht die Wärmebeständigkeit und Verschleißfestigkeit der Schneidkante, was zu längeren Werkzeugstandzeiten führt. Wie beeinflusst der Eckenradius das Bearbeitungsergebnis? Ein Eckenradius von 1,2 mm sorgt für stabile Schneidkanten und gute Oberflächenqualität bei gleichzeitig erhöhter Standzeit im Vergleich zu sehr kleinen Radien. Ist die Platte mit Standard-ISO-Haltern kompatibel? Ja, die Platte entspricht ISO-Formen; die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Welche Rolle spielt der Spanbrecher CM? Der Spanbrecher CM ist für eine kontrollierte Spanform ausgelegt und eignet sich für allgemeine Schrupp- und Schlichtoperationen an einer breiten Werkstoffpalette. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VCMT 160412 AH905 Wendeplatten - Tungaloy
Take advantage of the proven wear resistance of a PVD‑coated carbide grade and the predictable geometry of an ISO‑standard insert for reliable turning cycles; order via Metav Werkzeuge or consult our technical team for integration advice. VCMT 160412 AH905 ISO turning insert — PVD‑coated carbide, 1.2 mm corner radius — Tungaloy A VCMT160412 AH905 is an ISO‑standard rhombic indexable insert designed for precise external and internal turning where a sharp, durable cutting edge and process security are required. PVD-coated carbide AH905 1.2 mm corner radius Rhombic form, 35° cutting angle Cylindrical hole with 40°–60° countersink Durable coating and grade for steady productivity The combination of a PVD‑coating with a carbide substrate in the AH905 grade provides a balance between wear resistance and a consistently sharp edge. This leads to longer tool life under interrupted cuts and when handling tougher workpiece materials. The coating reduces adhesion and thermal load at the cutting zone, while the substrate retains edge stability — a pairing that supports predictable tool changes and less frequent regrinding. These technical characteristics translate directly into fewer production stops and improved process reliability when machining on a repeatable production schedule. Predictable mounting and ISO compatibility for fast integration Designed as part of an ISO‑standard turning insert family, compatibility is governed by the insert form, 7° relief, tolerance class, fastening type, size and thickness. The rhombic geometry with a 35° cutting angle and a 4.76 mm plate thickness ensures the insert fits standard holders that accept VCMT shape inserts. The centre hole is a cylindrical hole with a single‑side countersink (40°–60°), enabling secure clamping and straightforward replacement. These defined dimensions allow for repeatable seating and orientation in a holder, reducing set‑up times and helping to maintain consistent component geometry across batches. Stable cutting action and recommendations for use The chipbreaker CM delivers reliable chip formation across a range of materials when combined with the corner radius 1.2 mm, providing edge strength for moderate to heavy cuts and helping to avoid premature chipping. The rhombic form supports both external and internal turning tasks while the grade's fracture resistance is particularly suitable where a sharp cutting edge and process safety are both demanded. Select cutting parameters to match the grade and chipbreaker: climb or conventional turning can be applied depending on fixture rigidity and surface finish requirements. If further specification is needed for specific workpiece alloys or cycle optimisation, Metav Werkzeuge's technical advisors can provide machining data and recommendations. Contact Metav Werkzeuge for tailored advice on integrating Tungaloy inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to request technical guidance or place an order through our sales team Technical Data Article number: 6879349 Manufacturer SKU: TUN6879349 Supplier SKU: 6879349-Tungaloy Model series: ISO‑Drehwendeschneidplatten Label: VCMT160412 AH905 Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 7° Insert angle: 35° Special features Shape: rhombic Chipbreaker: CM Grade: AH905 (PVD‑coated) Hole style: cylindrical hole + single‑side countersink (40°–60°) Material: carbide (PVD‑coated) Application: turning FAQ What materials is this insert best suited for? The VCMT160412 AH905 insert is a wear‑resistant PVD‑coated carbide grade suited for a wide range of steels and general turning tasks where a sharp cutting edge and process security are required. How does the chipbreaker affect performance? The chipbreaker CM on the VCMT160412 AH905 promotes stable chip control and predictable breakage patterns, reducing the risk of chip entanglement and improving surface quality in continuous and interrupted cuts. Which holder characteristics must be checked before installation? Verify holder compatibility with the ISO VCMT form, the 7° relief, 16 mm seating, 4.76 mm thickness and the central hole style to ensure secure clamping and correct geometry in the assembly. What advantages does the AH905 grade provide over uncoated inserts? The AH905 PVD coating reduces adhesion and thermal stress at the cutting edge, extending life and maintaining finish quality compared with uncoated carbide in many turning operations. Can this insert be used for internal turning as well as external? Yes, the rhombic geometry and the 1.2 mm corner radius make it suitable for both external and internal turning applications where the insert geometry and holder allow the required approach angles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VCMT110302 NS9530 TSF Wendeplatten - Tungaloy
VCMT 110302 NS9530 Drehwendeschneidplatte von Tungaloy Die VCMT 110302 NS9530 ist eine ISO-genormte Schlichtsorte für das Drehen, entwickelt für präzise Oberflächengüte bei kontinuierlichem Schnitt Schlichtsorte für feine Oberflächengüte Unbeschichtetes Cermet für scharfe Schneidkante Passend für ISO-Halter mit zylindrischem Loch Freiwinkel 7° für geringe Schnittkräfte Radius 0,2 mm für exakte Konturen Komfortabler Werkstoff: Cermet und Hartmetall für feine Ergebnisse Die Kombination aus unbeschichtetem Cermet und Träger aus Hartmetall sorgt für eine ausgesprochen scharfe Schneidkante, die besonders bei Schlichtbearbeitung von Stahl niedrige Schnittkräfte ermöglicht. Anwender profitieren von gleichbleibender Oberflächengüte und reduzierter Nacharbeit. Durch die Materialwahl wird eine ruhige Spanbildung unterstützt, was die Prozessstabilität bei kleinen Zustellungen erhöht. Prozessvorteile: Präzision, Stabilität und Oberflächenqualität Mit einem Eckenradius von 0,2 mm und einem Freiwinkel von 7° liefert die Platte reproduzierbare Ergebnisse bei Außen- und Innendrehen. Die Sorte ist speziell für kontinuierlichen Schnitt ausgelegt und minimiert Vibrationen sowie Kraftspitzen. Das Ergebnis ist eine gleichmäßige Bearbeitungsqualität, die Rüstzeiten und Ausschuss reduziert und damit die Gesamtproduktivität steigert. Systemkompatibilität: ISO-Genormt und einfach integrierbar Die Wendeschneidplatte entspricht ISO-Normen und lässt sich über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke mit gängigen Außenhaltern und Bohrstangen kombinieren. Die Variante VCMT110302-TSF verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°), sodass Montage und Spanntechnik standardisiert und zuverlässig funktionieren. Anwendungsempfehlung: Für wen diese Sorte ideal ist Diese Schlichtplatte richtet sich an Anwender, die hohe Oberflächengüte und Prozesssicherheit beim Drehen von Stahl benötigen. Sie eignet sich für Produktionsumgebungen mit stabiler Werkzeugaufspannung und geringen Schnitttiefen. Bei Bedarf an robusterer Bearbeitung oder höheren Spanvolumina empfiehlt sich eine alternative Sorte oder ein spanbrechendes Wendeplattensystem. Empfehlung: Für präzise Schlichtbearbeitung empfehlen wir die VCMT 110302 NS9530 von Tungaloy; bei Fragen zur Halterkompatibilität oder Einsatzparametern erreichen Sie uns unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 6951532 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6951532 Daten Radius: 0,2 mm Winkel: 35° Freiwinkel: 7° Plattendicke: 3,18 mm Plattengröße: 11 Besonderheiten Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: TSF Sorte: NS9530 Schneidstofftyp: unbeschichtetes Cermet Material: Hartmetall Modellserie: ISO-Drehwendeschneidplatten Einsatz: Drehen Wendeplattenbezeichnung: VCMT110302-TSF FAQ Welche Werkstoffe lassen sich mit der VCMT 110302 NS9530 bearbeiten? Die VCMT 110302 NS9530 von Tungaloy ist als Schlichtsorte primär für Stahl ausgelegt und bietet dort geringe Schnittkräfte sowie hohe Oberflächengüte. Welche Halter passen zur VCMT110302-TSF? ISO-genormte Außenhalter und Bohrstangen, die Form, Freiwinkel und Befestigungsart für VCMT-Platten unterstützen, sind kompatibel; bei Unsicherheit die Herstellerspezifikation des Halters prüfen. Warum unbeschichtetes Cermet wählen? Unbeschichtetes Cermet wie bei dieser Platte liefert eine extrem scharfe Schneidkante und eignet sich besonders für kontinuierliche Schlichtschnitte mit hoher Oberflächengüte. Wie beeinflusst der Eckenradius das Ergebnis? Der Eckenradius von 0,2 mm ermöglicht feine Konturen und gute Oberflächen, reduziert aber die Standzeit im Vergleich zu größeren Radien bei robusteren Schnittbedingungen. Was bedeutet TSF bei der Wendeplatte? TSF bezeichnet den integrierten Spanbrecher, der die Spanformung und Spanabfuhr bei der gewählten Schlichtsorte optimiert und so die Prozessstabilität unterstützt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com