VNMG 160408 T6215 Wendeplatten - Tungaloy
Combining a CVD‑coated carbide T6215 grade, ISO‑standard VNMG160408 geometry and a 0.8 mm corner radius, this insert delivers stable turning performance in stainless steels with long tool life and predictable chip control. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. VNMG160408 T6215 VNMG turning insert — ISO 160408, for turning, Tungaloy VNMG160408 T6215 is an ISO‑standard rhombic turning insert designed for external and internal turning where reliable wear resistance and consistent chip control are required. CVD-coated carbide for wear resistance Optimised for turning of stainless steels ISO rhombic VNMG 160408 geometry Double-sided chipbreaker, cylindrical hole Increased uptime through durable coating and grade The combination of a CVD‑coated surface and a wear‑resistant carbide substrate reduces flank and crater wear, extending in‑service life and lowering changeover frequency. For production environments that demand repeatable cycles, the T6215 grade provides a balance of toughness and abrasion resistance appropriate for machining stainless steels under stable to lightly interrupted cutting conditions. This results in fewer tool changes, more consistent part tolerances and measurable productivity gains. Predictable clamping and compatibility for safe process integration Built to ISO dimensions with a rhombic VNMG form and a 0° relief angle, the insert ensures predictable seating, repeatable indexability and straightforward compatibility with ISO‑type holders. The 0.8 mm corner radius contributes to edge strength without sacrificing dimensional control on turned profiles. The cylindrical hole and standard tolerance classes simplify assembly with common clamping sets, helping to avoid downtime caused by misfit or incorrect seating. Practical selection guidance for everyday turning tasks When selecting an insert for stainless steel turning, prefer the combination of CVD coating and a balanced carbide grade for consistent performance; the VNMG160408 geometry paired with a double‑sided chipbreaker aids chip control and offers two usable cutting edges per index. For interrupted cuts choose a holder and clamping arrangement that maximise rigidity to complement the insert’s stable cutting characteristics. The VNMG160408 T6215 Tungaloy insert is particularly suitable where surface finish and dimensional repeatability are priorities. For tailored advice on machining parameters and holder compatibility for the Tungaloy VNMG160408 T6215 insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants provide application‑focused recommendations. Technical Data Article number: 6944987 SKU: 6944987-Tungaloy Manufacturer SKU: TUN6944987 Brand: Tungaloy Model series: ISO turning inserts Core dimensions Corner radius: 0.8 mm Insert size: 16 mm Relief angle: 0° Geometry angle: 35° ISO designation: 160408 Hole style: cylindrical hole Design & features Material: cemented carbide Coating: CVD coating Grade: T6215 Chipbreaker: double-sided Shape: rhombic (VNMG) Application: Turning (external and internal) Suitable for: stainless steels under stable to slightly interrupted conditions FAQ What materials is this insert intended for? The VNMG160408 T6215 Tungaloy insert is formulated primarily for machining stainless steels, delivering wear resistance and reliable surface finish under stable cutting conditions. Can the insert be used for interrupted cuts? Yes, the T6215 grade provides toughness for lightly interrupted cuts, but for heavy interruptions increased rigidity in the toolholder and reduced engagement are recommended. How is the insert mounted and indexed? The ISO‑standard VNMG geometry with a cylindrical hole is compatible with standard ISO clamping systems and allows easy indexing to the second cutting edge. What advantages does the CVD coating provide? The CVD coating improves abrasion resistance and extends tool life when turning abrasive stainless steel grades, resulting in longer intervals between indexings. Is the corner radius suitable for finishing passes? The 0.8 mm corner radius offers a compromise between edge strength and the ability to achieve good surface finish; for fine finishing, consider a smaller radius where applicable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VNMG 160408 T6215 Wendeplatten - Tungaloy
VNMG160408 T6215 Wendeplatte (Drehen) von Tungaloy Die VNMG160408 T6215 ist eine ISO-genormte Wendeplatte für das Drehen von rostfreien Stählen unter stabilen bis leicht unterbrochenen Schnittbedingungen. CVD-beschichtetes Hartmetall für lange Standzeit Optimierte Spanbildung durch doppelseitigen Spanbrecher ISO-Genormt: einfache Halterkompatibilität Rhombische Form mit 0,8 mm Eckenradius Mit zylindrischem Loch für sichere Befestigung Dauerhafte Schneidkante für produktive Zerspanung Die Kombination aus CVD-beschichtung und Hartmetall sorgt für verschleißarme Schnittbedingungen und verlängerte Werkzeugstandzeiten. Durch die chemische Dampfabscheidung der Beschichtung wird die Schneidkante gegen thermischen Verschleiß geschützt, was insbesondere bei der Bearbeitung von rostfreien Stählen die Stillstandszeiten reduziert. Der direkte Nutzen ist weniger Werkzeugwechsel und konstantere Bauteilqualität. Präzise Anwendung und einfache Integration ins System Als ISO-genormte Drehplatte ist die Kompatibilität mit Haltern über Form, Freiwinkel und Befestigung eindeutig gegeben. Die rhombische Plattenform und der doppelseitige Spanbrecher erlauben sowohl Außen- als auch Innendrehen mit hoher Prozessstabilität. Wer Halter und Unterlage passend wählt, profitiert von schneller Montage und reproduzierbaren Ergebnissen. Effizienz im Fertigungsprozess Für Fertigungsumgebungen, die auf hohe Produktivität setzen, bietet die Sorte T6215 eine praxisgerechte Balance aus Standzeit und Formstabilität. Das Resultat ist eine zuverlässige Spanformung, die Werkzeugbruch vorbeugt und Nacharbeit reduziert. Diese Eigenschaften machen die Platte geeignet für Serienfertigung und anspruchsvolle Einzelteile in der Zerspanung. Auswahlhinweise und Kurzbeschreibung technischer Parameter Der Eckenradius von 0,8 mm bietet einen guten Kompromiss zwischen Schnittfestigkeit und Oberflächenqualität; für sehr feine Oberflächen können kleinere Radien gewählt werden. Der Freiwinkel von 0° und die Plattendicke von 4,76 mm sind typische ISO-Werte, die bei der Auswahl des Außenhalters berücksichtigt werden müssen. Zur Erklärung für Einsteiger: CVD steht für chemische Dampfabscheidung, ein Verfahren zur Erzeugung harter Beschichtungen auf Hartmetallträgern. Empfehlung: Für produktive Anwendungen mit rostfreien Stählen die VNMG160408 T6215 direkt über Metav Werkzeuge anfragen oder die technische Beratung kontaktieren unter info@metav-werkzeuge.com / +49 2822 7131930 Produktmerkmale Artikelnummer: 6944944 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160408 (VNMG) Hersteller SKU: TUN6944944 Fakten Eckenradius: 0,8 mm Winkel: 35° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 16 mm Besonderheiten Material: Hartmetall Sorte / Beschichtung: T6215 (CVD-beschichtet, chemische Dampfabscheidung) Spanbrecher: doppelseitig Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: rhombisch Plattentyp: VNMG Anwendung: Drehen Einsatzgebiet: rostfreie Stähle FAQ Für welche Werkstoffe ist die VNMG160408 T6215 geeignet? Die VNMG160408 T6215 ist primär für die Bearbeitung von rostfreien Stählen ausgelegt und bietet dank der CVD-beschichteten Hartmetallsorte T6215 gute Verschleißfestigkeit unter stabilen bis leicht unterbrochenen Bedingungen. Kann diese Wendeplatte in standardisierten ISO-Haltern verwendet werden? Ja, die Platte ist ISO-genormt; die Kompatibilität zum Halter wird über Form, Freiwinkel, Befestigung, Größe und Dicke sichergestellt. Bei Unsicherheiten sollten Halterdaten geprüft werden. Welche Vorteile bietet die T6215-Beschichtung in der Praxis? Die T6215-Beschichtung reduziert thermischen Verschleiß und verbessert die Schneidkantenschärfe, was zu längeren Standzeiten und stabiler Spanbildung führt. Welchen Einfluss hat der Eckenradius von 0,8 mm auf das Ergebnis? Ein Eckenradius von 0,8 mm sorgt für gute Schnittfestigkeit und eine angemessene Oberflächengüte; für sehr feine Oberflächen können kleinere Radien sinnvoll sein. Ist die Platte für unterbrochene Schnitte geeignet? Ja, die Sorte ist für stabile bis leicht unterbrochene Schnitttypen ausgelegt; bei sehr starken Unterbrechungen sind spezialisierte Sorten zu empfehlen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated T6215 grade and a PM chipbreaker for reliable machining of stainless steels; the rhombic VNMG form with a 0.8 mm corner radius ensures consistent surface finishes and extended tool life. Order directly via Metav Werkzeuge or consult our application specialists for optimal holder selection and setup. VNMG 160408 T6215 — Indexable turning insert by Tungaloy A VNMG160408-PM T6215 indexable insert for turning, designed for stainless steel machining under stable to lightly interrupted cutting conditions. CVD-coated carbide grade T6215 Optimised for stainless steel turning Rhombic VNMG form with 35° lead angle 0.8 mm corner radius for reliable finishes Durable carbide grade for consistent performance The CVD-coated T6215 carbide provides a robust combination of wear resistance and edge stability for demanding turning tasks. The CVD-coated surface reduces adhesive wear and improves thermal resilience, which translates into longer tool life and more predictable cutting intervals. With a 0.8 mm corner radius, the insert supports improved workpiece integrity and surface finish while allowing for moderate feed rates. This balance of hardness and coating performance is particularly beneficial when machining stainless steels, where build-up on the cutting edge and rapid wear can compromise productivity. Clear compatibility guidance to reduce setup time As an ISO-format indexable plate, compatibility is determined by form, clearance angle, tolerance class, clamping method, size and thickness. The rhombic VNMG shape with a 35° lead angle and 0° clearance angle requires a matching external holder or boring bar and the correct clamp or underlay set. Selecting the correct tolerance class and fastening hardware prevents run-out and ensures repeatable geometry across tool changes. Choosing the appropriate holder and securing hardware reduces machine downtime and supports consistent cutting conditions for serial production. Designed for efficient turning and process stability The PM chipbreaker geometry is tuned to assist chip control during both external and internal turning, improving process reliability and reducing manual intervention for chip handling. The insert’s cylindrical locating hole simplifies secure clamping in standard VNMG holders and enables fast plate indexing. By combining CVD-coated carbide chemistry with a dedicated chipbreaker, the system promotes higher productivity through fewer interruptions and a reduced need for rework, while maintaining surface quality and dimensional stability on stainless components. Contact Metav Werkzeuge for application advice and to source the Tungaloy VNMG160408-PM T6215 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6944990 Manufacturer SKU: TUN6944990 Label: VNMG160408-PM T6215 Model series: ISO indexable turning inserts Material: Carbide Facts Corner radius: 0.8 mm Lead/angle: 35° Clearance angle: 0° Size: 16 mm Special features Coating/grade: CVD-coated, T6215 Chipbreaker: PM Shape: Rhombic, with cylindrical hole Application: Turning — external and internal FAQ What materials is this insert suited for? This insert, VNMG160408-PM T6215, is specified for machining stainless steels and performs well under stable to lightly interrupted cutting conditions. How does the PM chipbreaker affect machining? The PM chipbreaker improves chip control and evacuation during turning operations, helping to maintain consistent cutting forces and surface finish when using the VNMG160408-PM T6215 plate. Which holder features are required for correct fitment? Compatibility depends on holder form, clamping method, tolerance class, size and thickness; a matching VNMG external holder or boring bar with suitable clamp and screws is required for proper fit. Is the corner radius suitable for finishing cuts? The 0.8 mm corner radius on the VNMG160408-PM T6215 offers a good compromise between strength and surface quality, making it appropriate for semi-finishing and many finishing applications on stainless steels. Can the insert handle slightly interrupted cuts? Yes, the CVD-coated T6215 grade and the robust chipbreaker are designed to tolerate stable to lightly interrupted machining conditions while preserving tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T6215 carbide, ISO VNMG geometry and a 35° lead angle to achieve consistent chip control and reduced tool changes in stainless steel turning. The insert’s double-sided design and cylindrical-hole clamping ensure secure seating and economical use of edges. Order the VNMG160408 T6215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. VNMG160408 T6215 VNMG Turning Insert — CVD-coated carbide, 35° lead angle by Tungaloy A VNMG160408 T6215 insert for ISO-conforming external and internal turning, optimised for stable to lightly interrupted machining of stainless steels. CVD-coated T6215 grade for high wear resistance Designed for stainless steel turning under stable conditions Rhombic VNMG form with 35° lead angle Double-sided insert with cylindrical hole for secure clamping Durable cutting performance for stainless steel applications The CVD-coated T6215 grade combines a wear-resistant surface with a robust carbide substrate to keep edge geometry stable during long runs. In practice, this translates to fewer interruptions for index changes and predictable tool life in shop-floor production. The coating limits flank wear and helps resist built-up edge when machining demanding materials such as stainless steels, so the process remains consistent and repeatable even under slight interruptions. Reliable chip control and reduced set-up time The insert’s double-sided construction and integrated chipbreaker shape promote controlled chip formation, which reduces the risk of entanglement and improves surface finish. The presence of a cylindrical hole and ISO-compliant clamping geometry ensures a firm seat in standard holders, simplifying insertion and removal during set-up. Together, these features lower downtime and contribute directly to improved line throughput and predictable cycle times. Seamless fit into ISO turning systems for flexible machining Compatibility with holders depends on form, tolerance class, fixing and thickness; the VNMG form and ISO-conforming dimensions facilitate interchangeability across common tool systems. The 35° lead angle delivers a balanced cutting force direction, and the supplied 0° clearance angle provides a neutral geometry that is often advantageous when avoiding excessive cutting-edge engagement on stainless materials. This geometry aids dimensional stability and reduces the need for complex fixture adjustments. Economical choice for productive workshops Using a reversible insert with two usable edges reduces tooling costs per cutting edge and shortens maintenance cycles, contributing to a cost-effective production setup. The combination of stable edge retention and consistent chip control increases overall productivity and supports longer operating intervals between inspections. For operations aiming to maximise uptime while maintaining surface quality, this insert offers a straightforward path to longer tool life and lower total cost of ownership. For reliable stainless steel turning solutions, contact Metav Werkzeuge to source the Tungaloy VNMG160408 T6215 insert and receive tailored technical advice from our team. Technical Data Article number: 6876179 Manufacturer SKU: TUN6876179 SKU: 6876179-Tungaloy Designation: VNMG160408 Grade: T6215 Material: Carbide Coating: CVD Facts Corner radius: 0.8 mm Insert size: 16 mm ISO designation: 160408 Lead angle: 35° Clearance angle: 0° Special features Rhombic VNMG form Double-sided chipbreaker Cylindrical-hole clamping ISO-conforming turning insert Suited to turning (Drehen) Optimised for stainless steels FAQ What materials is this insert designed for? The VNMG160408 T6215 insert is optimised for turning stainless steels under stable to lightly interrupted conditions. How does the T6215 grade improve tool life? The T6215 CVD coating reduces flank wear and improves heat resistance, which extends the usable life of each cutting edge on the insert. Is the insert compatible with standard VNMG holders? Yes; the VNMG160408 follows ISO dimensions and the cylindrical-hole fixing supports secure clamping in standard VNMG holders. How many cutting edges are available per insert? This is a double-sided VNMG insert, providing two usable cutting edges per index. What benefits does the 35° lead angle provide? The 35° lead angle balances cutting forces and assists in achieving stable cutting behaviour and good surface quality on axial and radial passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160408 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of wear-resistant CVD-coated carbide, precise 35° rhombic geometry and a 0.8 mm corner radius for stable turning of stainless steels; these attributes ensure predictable tool life and consistent surface finish. Order the VNMG160408 T6215 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. VNMG160408 T6215 turning indexable insert, CVD-coated carbide (Tungaloy) The VNMG160408 T6215 is an ISO-standard rhombic turning indexable insert designed for general external and internal turning under stable to lightly interrupted conditions. CVD-coated carbide grade T6215 35° rhombic geometry for stable cutting 0.8 mm corner radius for robust edge strength Double-sided chipbreaker for extended use Greater productivity through predictable wear and high material coverage The CVD-coated carbide grade T6215 delivers a balance of wear resistance and edge stability that is optimised for machining stainless steels under steady or slightly interrupted cutting conditions. The coating reduces flank wear and helps maintain cutting-edge integrity, which in turn increases productive machining time between index changes. This results in a more predictable process and reduced tool-change frequency, making the insert especially suitable for series production and workshop environments seeking improved throughput. Precision geometry for consistent surface quality and tool life The 35° rhombic geometry and 0° clearance combine to offer stable chip formation and secure clamping in compatible holders. The modest 0.8 mm corner radius supports a robust cutting edge that resists chipping while still producing a fine surface finish on turned components. In practical terms, this means fewer rejects and less rework when machining components where surface integrity is critical, such as assemblies with press fits or components subject to corrosion resistance treatments. Flexible system integration and simple holder compatibility As an ISO plate, compatibility with the tool holder depends on form, relief angle, tolerance class, attachment, size and thickness; however, the standardised VNMG form ensures wide availability of matching external holders and boring bars. The insert is supplied with a cylindrical hole and double-sided chipbreaker, enabling secure fixation and economical flipping for extended life. For workshops concerned with tooling logistics, the standard format supports rapid replacement and simplified inventory management. Practical benefits for workshop decision-making Choosing this insert supports efficient material removal while controlling machining costs: the coated substrate reduces wear rates, the double-sided design halves insert consumption per usable edge, and the ISO conformity simplifies procurement. For less experienced staff, the predictable performance reduces setup time and trial-and-error adjustments. For procurement and production planners, this results in clearer life-cycle expectations and improved machine availability. Contact Metav Werkzeuge for a tailored cutting solution or technical advice on integrating VNMG160408 T6215 inserts into existing turning tool systems — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: 6944960 SKU: 6944960-Tungaloy Manufacturer article number: 6944960 Model series: ISO-Drehwendeschneidplatten Core dimensions and numbers Size designation: 160408 Plate size: 16 Corner radius: 0.8 mm Geometry angle: 35° Relief angle: 0° Materials and special features Material: CVD-coated carbide Grade: T6215 Plate form: rhombic Hole: with cylindrical hole Chipbreaker: double-sided Application: Turning of stainless steels; external and internal turning ISO-standard indexable insert compatible with standard holders FAQ Which materials is this insert suitable for? The VNMG160408 T6215 indexable insert is specified for stainless steels, offering wear-resistant performance for stable to slightly interrupted turning operations. What does the T6215 grade indicate? T6215 is a CVD-coated carbide grade designed for resistant flank wear and reliable performance when turning stainless steels under productive machining conditions. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius provides a robust cutting edge that reduces chipping risk and helps achieve consistent surface finish while allowing moderate cutting depths. Is this insert compatible with standard VNMG holders? Yes, the ISO designation VNMG160408 ensures compatibility with standard external holders and boring bars, although holder match depends on form, attachment and tolerance class. How many usable edges are available per insert? The double-sided chipbreaker indicates multiple usable edges; the VNMG form typically allows several indexed edges, improving economy per insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160408 T6215 Wendeplatten - Tungaloy
VNMG160408 T6215 Wendeplatte Drehen von Tungaloy VNMG160408 T6215 ist eine ISO-genormte, CVD-beschichtete Wendeplatte für das Drehen von rostfreiem Stahl unter stabilen bis leicht unterbrochenen Bedingungen ISO-genormt für einfache Halterkompatibilität CVD-beschichtetes Hartmetall für hohe Verschleißfestigkeit Speziell entwickelt für rostfreien Stahl Rhombische Form mit zylindrischem Loch für sichere Befestigung Doppelseitiger Spanbrecher und Eckenradius 0,8 mm Produktivität und Wirtschaftlichkeit steigern Die VNMG160408 T6215 verbindet hohe Standzeit mit konstanter Zerspanleistung, was die Maschinenauslastung erhöht und Rüstzyklen reduziert. Die CVD-Beschichtung sorgt für verbesserte Verschleißfestigkeit bei der Bearbeitung von rostfreiem Stahl, wodurch die Schneidkante länger einsatzfähig bleibt. Diese Kombination aus Beständigkeit und Wiederverwendbarkeit reduziert Werkzeugkosten pro Bauteil und erhöht die Wirtschaftlichkeit in Serienprozessen. Materialeigenschaften und technische Vorteile Ausgelegt aus Hartmetall mit CVD-Beschichtung bietet die Platte eine robuste Schnittkante und gleichmäßige Spanbildung. CVD (Chemical Vapor Deposition) ist ein Schichtverfahren, das sehr harte, verschleißresistente Schichten erzeugt und so die Lebensdauer der Wendeschneidplatte verlängert. Der Eckenradius 0,8 mm unterstützt eine stabile Schnittkante und trägt zu einer guten Oberflächengüte bei, ohne die Standzeit unnötig zu mindern. Passgenauigkeit und Einsatzempfehlungen Die ISO-Genormung gewährleistet, dass Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bei der Auswahl des Halters berücksichtigt werden müssen. Bei der VNMG160408 ist der Freiwinkel 0° zu beachten; er eignet sich für Anwendungen, in denen eine stabile Spanführung und eine kräftige Kantenbelastung erforderlich sind. Für beste Ergebnisse Spanbrecher und Sorte passend zum Werkstoff und zur Bearbeitungsstabilität wählen. Systemaufbau und praktische Handhabung Im typischen Systemaufbau wird die Wendeschneidplatte zusammen mit einem passenden Außenhalter oder einer Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben eingesetzt. Die rhombische Plattenform mit zylindrischem Loch erleichtert die sichere Fixierung, und der doppelseitige Spanbrecher erlaubt beidseitige Nutzung, was Rüst- und Ersatzteilbedarf reduziert. Geeignet ist die Platte primär für Außen- und Innendrehen unter stabilen Schnittbedingungen. Empfehlung: Für produktive Zerspanung von rostfreiem Stahl die VNMG160408 T6215 Wendeplatte von Tungaloy einsetzen; bei Unsicherheiten oder für Schnittdaten technische Beratung anfordern unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 6876170 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160408 Hersteller SKU: TUN6876170 Daten Eckenradius: 0,8 mm Winkel: 35° Plattengröße: 16 mm Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD = chemische Gasphasenabscheidung) Sorte: T6215 Anwendung: Drehen Spanbrecher: doppelseitig Lochstil: zylindrisches Loch Plattenform: rhombisch FAQ Ist die VNMG160408 T6215 für alle rostfreien Stähle geeignet? Die VNMG160408 T6215 von Tungaloy ist speziell für die Bearbeitung von rostfreiem Stahl ausgelegt und bietet gute Verschleißfestigkeit; die endgültige Eignung hängt jedoch von Werkstückgeometrie, Maschinenstabilität und Schnittbedingungen ab. Welche Vorteile bietet die CVD-Beschichtung bei dieser Wendeplatte? Die CVD-Beschichtung der VNMG160408 sorgt für harte, verschleißresistente Schichten, die Standzeit und Temperaturbeständigkeit erhöhen und so konstante Oberflächengüten ermöglichen. Worauf ist bei der Halterauswahl zu achten? Kompatibilität ergibt sich aus Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke; für die VNMG160408 ist die rhombische Form und das zylindrische Loch zu berücksichtigen. Welche Rolle spielt der Eckenradius 0,8 mm? Der Eckenradius 0,8 mm verbessert die Kantentragfähigkeit und trägt zu einer verbesserten Oberflächengüte bei, ohne die Lebensdauer unangemessen zu reduzieren. Lässt sich die Platte beidseitig verwenden? Ja, die VNMG160408 verfügt über einen doppelseitigen Spanbrecher, wodurch beide Schneidkanten genutzt werden können und der Werkzeugverbrauch sinkt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160408 T6215 Wendeplatten - Tungaloy
VNMG 160408 T6215 ISO-Drehwendeschneidplatte zum Drehen – Tungaloy Die VNMG160408-TF T6215 ist eine ISO-genormte Drehwendeschneidplatte für präzise Außen- und Innendreharbeiten an rostfreiem Stahl und bietet hohe Prozesssicherheit unter stabilen bis leicht unterbrochenen Bedingungen. CVD-beschichtetes Hartmetall für hohe Standzeit Optimierter Spanbrecher TF für stabile Spanbildung Rhombische Form mit zylindrischem Loch für einfache Befestigung Eckenradius 0,8 mm für saubere Schnittkanten FreiWinkel 0° und 35° Plattenwinkel für vielseitige Anwendung Höhere Produktivität durch stabile Schneidkante Die Kombination aus CVD-beschichtung und hochwertigem Hartmetall sorgt für eine verlängerte Standzeit und konstante Bearbeitungsergebnisse. Durch die verschleißfeste Sorte T6215 werden Standzeiten optimiert, wodurch Rüstzeiten reduziert und Ausbringung erhöht werden. Anwender profitieren von planbaren Werkzeugwechselintervallen und einer verlässlichen Oberflächengüte bei Serien- und Einzelteilfertigung. Speziell abgestimmt auf rostfreien Stahl Für die Bearbeitung von rostfreiem Stahl ist die Sorte T6215 konzipiert: Sie bietet eine robuste Schneidkante und gute Spanabfuhr bei typischen Schnittbedingungen. Dies ermöglicht gleichmäßige Oberflächen und reduziert Nachbearbeitung. Dabei ist der Spanbrecher TF so ausgelegt, dass er die Spanbildung bei stabilen bis leicht unterbrochenen Schnitten kontrolliert, was die Prozesssicherheit gerade bei anspruchsvollen Werkstoffen erhöht. Kompatibilität und Einbaurichtlinien für sicheren Einsatz Die Platte ist ISO-genormt und die Kompatibilität zum Halter richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die rhombische Plattenform mit zylindrischem Loch vereinfacht die Montage in standardisierten Außenhaltern oder Bohrstangen. Bei der Werkzeugauswahl sollte auf passenden Unterlage/Klemmsatz und Ersatzschrauben geachtet werden, um die geforderte Stabilität und Wiederholgenauigkeit zu gewährleisten. Zielgruppe und typische Einsatzfelder Entwickelt für Anwender in der Serienfertigung und im Maschinenbau, eignet sich diese Wendeschneidplatte besonders für Zerspanungsbetriebe, die rostfreien Stahl bearbeiten und dabei Wert auf Prozessstabilität legen. Die Platte ist praxistauglich für Außen- und Innendrehen und unterstützt Fertigungsprozesse, die gleichbleibende Qualität und Wirtschaftlichkeit erfordern. Empfehlung: Die VNMG160408-TF T6215 von Tungaloy ist eine zuverlässige Wahl für produktive Drehprozesse an rostfreiem Stahl; technische Beratung und Bestellabwicklung über Metav Werkzeuge – eMail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 6944909 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160408-TF T6215 SKU Hersteller: TUN6944909 Daten Eckenradius: 0,8 mm Winkel: 35° FreiWinkel: 0° Plattengröße: 16 mm Loch: mit Loch (zylindrisches Loch) Besonderheiten Material: Hartmetall Beschichtung: CVD-beschichtet (chemische Gasphasenabscheidung, verschleißfest) Sorte: T6215 Spanbrecher: TF Plattenform: rhombisch Einsatz: Drehen ISO-genormt FAQ Welche Werkstoffe eignet die Platte besonders gut bearbeiten? Die VNMG160408-TF T6215 von Tungaloy ist speziell für die Bearbeitung von rostfreiem Stahl ausgelegt und liefert hier konstante Ergebnisse dank der verschleißfesten CVD-beschichtung und dem Spanbrecher TF. Ist die Platte mit Standard-Außenhaltern kompatibel? Ja, die ISO-genormte VNMG160408-TF T6215 ist für gängige Außenhalter und Bohrstangen geeignet; die Kompatibilität hängt von Form, Freiwinkel und Befestigung ab. Welche Vorteile bietet die Sorte T6215 im Vergleich zu unbeschichteten Platten? Die Sorte T6215 bietet durch ihre CVD-beschichtung verbesserte Verschleißfestigkeit und damit längere Standzeit sowie eine stabilere Spanbildung gegenüber unbeschichteten Platten. Welche Plattengröße und Eckenradius sind verfügbar? Bei der VNMG160408-TF T6215 beträgt die Plattengröße 16 mm und der Eckenradius 0,8 mm, was präzise Schnittkanten und gute Kantentragfähigkeit ermöglicht. Wie wirkt sich der Spanbrecher TF auf die Bearbeitung aus? Der Spanbrecher TF wurde entwickelt, um bei stabilen bis leicht unterbrochenen Schnitten die Spanform zu kontrollieren, wodurch die Prozesssicherheit erhöht und die Oberflächengüte verbessert wird. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160408 T9215 TF Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215 and a 0.8 mm corner radius for consistently productive turning with high wear and fracture resistance; order the VNMG160408-TF T9215 directly via Metav Werkzeuge or ask our consultants for application guidance. VNMG 160408 T9215 indexable insert for turning — CVD-coated carbide, rhombic VNMG geometry, Tungaloy VNMG160408-TF T9215 is an ISO-standard indexable insert engineered for external and internal turning in medium-grade steel applications. CVD-coated carbide grade T9215 Optimised for mid-range steel machining Rhombic VNMG geometry, 0.8 mm radius Suitable for continuous to light interrupted cuts Consistent productivity through material and coating technology The insert combines a CVD-coated carbide substrate with the T9215 grade, which offers a balance of high wear resistance and fracture toughness tailored to medium-strength steel machining. The coating reduces flank wear and extends tool life under continuous cutting, while the base carbide maintains edge robustness during slight interruptions. Compatibility with standard ISO toolholders is governed by the insert’s form, relief angle, tolerance class, fixing method, size and thickness, so selection against the holder specification ensures repeatable clamping and predictable cutting performance. Geometry and chip control deliver stable turning and surface quality With a rhombic VNMG form, a 0.8 mm corner radius and a 35° principle angle, the insert supports good surface finish and manageable cutting forces in routine turning operations. The TF chipbreaker is engineered to form short, controllable chips when machining steels, helping to protect both the machined surface and the tool. The version supplied with a cylindrical hole facilitates secure fastening in compatible holders and contributes to repeatable seating and indexability. For shops aiming to increase throughput, the combination of geometry and chip control enables higher feeds while maintaining component tolerances. Practical use, selection advice and workshop benefits Selection of the correct insert grade and chipbreaker is decisive: the T9215 grade is the first choice for many mid-range steel tasks because it unites productivity with process reliability across continuous to slightly interrupted cuts. When integrating the insert into a tooling system, match the ISO code and insert size (160408) to the clamping arrangement and tool overhang considerations to avoid chatter. The ISO-series design and standardised dimensions simplify stock management and changeover, while the robust edge preparation reduces downtime for edge failures. For complex setups or unusual materials, consult the technical advisors to align cutting data and holder choice with production goals. For application recommendations or to secure original Tungaloy VNMG160408-TF T9215 inserts, contact Metav Werkzeuge — technical advice and procurement support are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6944903 Manufacturer SKU: TUN6944903 SKU: 6944903-Tungaloy Label: VNMG160408-TF T9215 Model series: ISO-Drehwendeschneidplatten Application: Turning Facts Corner radius: 0.8 mm Main angle: 160408 (ISO code) Relief angle: 0° Principal cutting edge angle: 35° Plate size: 16 Hole: with cylindrical hole Special features CVD-coated carbide, grade T9215 Chipbreaker type: TF Rhombic insert geometry (VNMG) Suited to medium steel machining Compatible with ISO-standard toolholders Designed for continuous to light interrupted cuts High wear resistance and fracture toughness FAQ What materials is this insert best suited for? The VNMG160408-TF T9215 insert is optimised for medium-grade steel machining; the T9215 grade combines wear resistance and toughness for productive turning. How does the TF chipbreaker affect performance? The TF chipbreaker produces short, controlled chips on steel, improving chip evacuation and contributing to stable cutting and better surface quality with the VNMG geometry. Is the insert compatible with standard ISO holders? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; matching these parameters to the insert’s ISO designation (160408) ensures proper fit and clamping. What does the 0.8 mm radius mean for finishing operations? A 0.8 mm corner radius balances edge strength and surface finish, allowing higher feeds than very small radii while still achieving good external and internal surface quality. Why choose CVD-coated carbide T9215 over other grades? The T9215 grade offers a productive compromise between wear resistance and fracture safety for continuous to slightly interrupted turning in steels, making it a solid default choice for many production environments. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide and the T9215 performance grade for productive medium-steel turning; the ISO geometry ensures reliable fitment in standard holders. Order directly via Metav Werkzeuge or consult the team for application-specific recommendations. VNMG160408-PS T9215 — VNMG 160408 ISO turning insert for turning, Tungaloy VNMG160408-PS T9215 is an ISO-standard indexable turning insert designed for external and internal turning, optimised for medium-steel machining with a CVD-coated carbide grade for extended wear resistance. CVD-coated carbide grade T9215 for steel machining ISO VNMG 160408 rhombic insert, secure compatibility 0.8 mm nose radius for controlled cutting results Cylindrical hole for repeatable, secure clamping Productivity through a balance of wear resistance and toughness The combination of a CVD-coated surface with a robust carbide substrate in grade T9215 delivers a measured balance between wear resistance and fracture toughness. This makes the insert particularly suited to continuous and slightly interrupted cuts in medium-strength steel, enabling longer tool life and fewer tool changes. Because the insert conforms to the ISO geometry, the fit to a compatible toolholder depends on form, clearance angle, tolerance class, fastening method, size and thickness — all of which are industry-standard parameters that support predictable machining results and process planning. Geometry and chip control that improve surface finish and stability The rhombic insert form and a 0.8 mm corner radius provide a controlled contact area that helps achieve consistent surface quality while maintaining cutting-edge strength. The PS chipbreaker is optimised for medium-steel applications, supporting effective chip segmentation and evacuation which reduces built-up edge and improves process stability. With a clearance angle of 0° and a specified approach angle of 35°, the insert supports neutral cutting forces in many turning setups, helping to reduce vibration and deliver repeatable dimensional accuracy in both external and internal turning operations. System integration, handling and application advice This indexable insert forms part of a machining system: ISO turning insert, a matching external holder or boring bar, a shim/clamp set and replacement fixing screws. Such a system approach simplifies tool management and replacement logistics on the shop floor. The insert’s cylindrical hole assures axial location and secure clamping for repeatable seating. For workshops aiming to increase throughput, the combination of grade T9215 and appropriate holder stiffness yields a cost-effective route to higher productivity without sacrificing process reliability. If additional technical data is required, Metav Werkzeuge can provide matching holder recommendations and setup guidelines. Secure consistent productivity with the Tungaloy T9215 grade — contact Metav Werkzeuge for tailored recommendations and stock information. Technical data Article number: 6796054 SKU: 6796054-Tungaloy Manufacturer SKU: TUN6796054 Model series: ISO turning indexable inserts Material: Carbide (Hartmetall) Coating: CVD-coated Facts Size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Approach/lead angle: 35° Hole: with cylindrical hole Special features Rhombic insert shape Chipbreaker: PS Grade: T9215 Suitable for medium steel machining For external and internal turning Compatibility via form, clearance, tolerance, fastening, size, thickness System components: insert + holder or boring bar + shim/clamp + replacement screws FAQ What materials is this insert intended for? The VNMG160408-PS T9215 insert is specified for medium-steel machining; the CVD-coated carbide grade T9215 offers wear resistance and fracture toughness for such applications. Can the insert be used for both external and internal turning? Yes, the ISO VNMG geometry and the PS chipbreaker make the insert suitable for external and internal turning when combined with an appropriate holder or boring bar. How does the 0.8 mm radius affect machining performance? A 0.8 mm corner radius offers a balance between a robust cutting edge and the ability to produce a stable surface finish, helping to absorb cutting loads and reduce chatter on many setups. What does the cylindrical hole provide during clamping? The cylindrical hole ensures positive axial location and repeatable seating in the clamping system, improving positional accuracy and simplifying insert indexing. Is the chipbreaker suited to interrupted cuts? The PS chipbreaker is designed for controlled chip formation in continuous to slightly interrupted cuts commonly encountered in medium-steel turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160408 T9215 Wendeplatten - Tungaloy
VNMG 160408 T9215 ISO-Drehwendeschneidplatte zum Drehen – Tungaloy VNMG 160408 T9215 verbindet hohe Produktivität mit robuster Schneidkante und eignet sich speziell für das Außen- und Innendrehen von Stahl. ISO-genormte Rhombusplatte VNMG mit zylindrischem Loch CVD-beschichtetes Hartmetall für lange Standzeiten Eckenradius 0,8 mm für präzise Konturarbeit Freiwinkel 0° und 35° Spanwinkel für stabile Schnitte Spanbrecher PM: universell einsetzbar bei mittleren Zustellungen Materialqualität und Schutz für lange Standzeiten Die Wendeschneidplatte besteht aus Hartmetall und ist CVD-beschichtet, was Verschleißwiderstand und Zähigkeit kombiniert. Diese Materialwahl sorgt für konstante Schneidkante auch bei höheren Schnittgeschwindigkeiten und verlängert die Werkzeugstandzeit. Für Betriebe bedeutet das weniger Werkzeugwechsel, höhere Maschinenauslastung und planbare Produktionskosten. Der Einsatz der Sorte T9215 ist auf mittlere Stahlbearbeitung optimiert und ergibt ein ausgewogenes Verhältnis aus Zähigkeit und Verschleißfestigkeit. Leistung im Bearbeitungsprozess und Spanverhalten Durch den speziell ausgelegten PM-Spanbrecher entstehen kontrollierte Späne bei kontinuierlichem bis leicht unterbrochenem Schnitt, was die Spanabfuhr vereinfacht und die Oberflächengüte stabilisiert. Die Kombination aus Eckenradius 0,8 mm und Freiwinkel 0° ermöglicht präzise Konturen bei gleichzeitig guter Kantensicherheit. Anwender profitieren von reproduzierbaren Ergebnissen und reduziertem Ausschuss bei Serienfertigungen. Kompatibilität, Einbau und Einsatzhinweise Die Platte ist ISO-genormt; die Kompatibilität zum Halter hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Vor dem Einsatz sollten Haltergeometrie und Schraublage geprüft werden, um Spannungs- und Schwingungsprobleme zu vermeiden. Der rhombische Plattenaufbau mit zylindrischem Loch erleichtert die sichere Fixierung im Außenhalter oder in der Bohrstange; Ersatzschrauben und Unterlagen sind beim Systemaufbau zu berücksichtigen. Zielgruppe und wirtschaftlicher Nutzen Entwickelt für Lohnfertiger und Produktionsbetriebe, die bei Stahlbearbeitung auf Produktivität und Prozesssicherheit Wert legen. Die T9215-Sorte bietet eine wirtschaftliche Lösung für mittlere Schnittbedingungen und reduziert durch längere Standzeiten Stillstands- und Rüstzeiten. Das Ergebnis ist eine verbesserte Auslastung der Maschinen und ein positives Verhältnis von Werkzeugkosten zu Produktionsleistung. Empfehlung: Tungaloy VNMG160408-PM T9215 für wirtschaftliche Stahlbearbeitung wählen und technische Beratung bei Metav Werkzeuge anfordern: info@metav-werkzeuge.com • +49 2822 7131930 Technische Daten Artikelnummer: 6796098 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160408-PM T9215 (VNMG) SKU Hersteller: TUN6796098 Fakten Eckenradius: 0,8 mm Winkel: 35° Freiwinkel: 0° Plattengröße: 16 mm Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9215 Spanbrecher: PM (Spanformer, universell einsetzbar) Plattenform: rhombisch Loch: mit Loch (zylindrisches Loch) Anwendung: Drehen Modellserie: ISO-Drehwendeschneidplatten Einsatz der Sorte: erste Wahl für die mittlere Stahlbearbeitung; verbindet hohen Verschleißwiderstand mit Bruchsicherheit und eignet sich für hohe Produktivität bei kontinuierlichem bis leicht unterbrochenem Schnitt FAQ Welche Werkstoffe lassen sich mit dieser Platte bearbeiten? Die VNMG160408-PM T9215 von Tungaloy ist primär für die mittlere Stahlbearbeitung ausgelegt und liefert bei diesen Werkstoffen das beste Verhältnis von Standzeit zu Zerspanleistung. Wie beeinflusst der Eckenradius die Bearbeitung? Der Eckenradius 0,8 mm sorgt für präzise Konturführung und höhere Kantensicherheit; das reduziert Ausbrüche an der Schneidkante und verbessert die Oberflächengüte bei Außen- und Innendrehen. Ist die Platte für unterbrochene Schnitte geeignet? Ja, die Sorte T9215 kombiniert Zähigkeit und Verschleißfestigkeit, wodurch sie auch leichte Unterbrechungen im Schnitt zuverlässig verkraftet. Welche Vorteile bietet die CVD-Beschichtung konkret? Die CVD-Beschichtung auf der Tungaloy Platte erhöht den Verschleißwiderstand und schützt die Schneidkante gegen thermischen und mechanischen Verschleiß, was längere Standzeiten und weniger Werkzeugwechsel zur Folge hat. Wie wird die Kompatibilität mit dem Halter geprüft? Kompatibilität ergibt sich aus Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; vor dem Einbau sollten Haltergeometrie und Befestigungsart kontrolliert werden, um eine sichere Fixierung zu gewährleisten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160408 T9215 Wendeplatten - Tungaloy
VNMG 160408 T9215 Wendeplatte für Drehen von Tungaloy Die VNMG 160408 T9215 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen mit CVD-beschichtetem Hartmetall und hoher Produktivität. ISO-genormte Plattenform, einfache Maschinenkompatibilität CVD-Beschichtung T9215 für erhöhte Verschleißfestigkeit Für mittlere Stahlbearbeitung und leicht unterbrochene Schnitte Doppelseitige Plattenform mit zylindrischem Loch Eckenradius 0,8 mm für präzise Rundläufe Höhere Produktivität bei mittleren Schnitten Die VNMG160408 T9215 bietet eine Kombination aus Produktivität und Zuverlässigkeit, die speziell für die mittlere Stahlbearbeitung entwickelt wurde. Durch die CVD-Beschichtung bleibt die Schneidkante länger verschleißfest, was Stillstandszeiten reduziert und die Spankontrolle verbessert. Anwender profitieren von konstanter Schnittqualität bei kontinuierlichem und leicht unterbrochenem Schnitt, wodurch sich Fertigungszyklen effizienter planen lassen. Material und Schutzschicht für längere Standzeiten Das Hartmetall mit CVD-Beschichtung (chemische Dampfabscheidung) sorgt für hohe Verschleißfestigkeit und gute Bruchsicherheit. Diese Kombination ermöglicht stabile Spanbildung bei typischen Schnittbedingungen in Stahlwerkstoffen. Für Anwender bedeutet das weniger Werkzeugwechsel, geringeren Materialverbrauch durch Ausschussvermeidung und eine zuverlässigere Oberflächengüte bei Serienfertigung. Passgenauigkeit und Systemkompatibilität im Werkzeugaufbau Die Kompatibilität zum Halter richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die rhombische Plattenform mit 0° Freiwinkel und zylindrischem Loch erlaubt einfache Montage in gängigen Außenhaltern und Bohrstangen. Dadurch lässt sich die Wendeplatte schnell in bestehende Werkzeugaufbauten integrieren, ohne aufwendige Adapter oder Justagen, was Rüstzeiten reduziert. Empfohlene Einsatzbereiche und Anwenderkreis Die Wendeplatte ist geeignet für das Außen- und Innendrehen von Stahlteilen in Serien- und Einzelteilfertigung. Sie richtet sich an Anwender in der CNC-Zerspanung, die eine wirtschaftliche Lösung mit guter Standzeit suchen. Durch den Eckenradius von 0,8 mm eignet sich die Platte besonders für präzise Rundläufe und reproduzierbare Bauteilmaße bei mittleren Schnitttiefen. Empfehlung: Die Tungaloy Wendeplatte T9215 wählen, wenn wirtschaftliche Stahlbearbeitung mit konstanter Schneidkantengüte gefordert ist; bei Fragen technische Beratung per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 6772363 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160408 Fakten Eckenradius: 0,8 mm Winkel: 35° Plattendicke: 4,76 mm Plattengröße: 16 mm Besonderheiten Schneidstoff: Hartmetall Beschichtung: CVD-Beschichtung (chemische Dampfabscheidung) Sorte: T9215 (für mittlere Stahlbearbeitung) Plattenform: rhombisch Freiwinkel: 0° Lochstil: zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen Modellserie: ISO-Drehwendeschneidplatten SKU Hersteller: TUN6772363 FAQ Für welche Werkstoffe ist die VNMG160408 T9215 am besten geeignet? Die VNMG160408 T9215 von Tungaloy ist optimiert für die mittlere Stahlbearbeitung; die CVD-Beschichtung bietet gute Verschleißfestigkeit bei kontinuierlichen und leicht unterbrochenen Schnitten. Ist die Platte beidseitig verwendbar? Ja, die Wendeplatte ist doppelseitig ausgelegt, was die Nutzungsdauer pro Platte erhöht und die Wirtschaftlichkeit der Fertigung verbessert. Welcher Eckenradius eignet sich für präzise Rundläufe? Der Eckenradius von 0,8 mm gewährleistet stabile Rundläufe und reproduzierbare Bauteilmaße bei üblichen Spanbedingungen. Welche Maschinenkomponenten beeinflussen die Kompatibilität? Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab; die VNMG160408 ist ISO-genormt und passt in viele gängige Außenhalter. Welche Informationen enthält die Hersteller‑SKU? Die Hersteller‑SKU TUN6772363 identifiziert die spezielle Ausführung der VNMG160408 T9215 und erleichtert Nachbestellungen und Rückfragen zur Spezifikation. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160408 T9215 Wendeplatten - Tungaloy
Combine CVD‑coated cemented carbide durability with a TQ chipbreaker optimised for medium‑range steel turning to achieve stable productivity and longer tool life; order the VNMG160408‑TQ T9215 directly via Metav Werkzeuge or ask our consultants if needed. VNMG 160408 T9215 VNMG160408‑TQ ISO turning insert for medium steel machining — Tungaloy The VNMG160408‑TQ T9215 is an ISO‑standard rhombic turning insert designed for efficient exterior and interior turning of medium steels with a 0.8 mm corner radius. CVD‑coated cemented carbide grade T9215 Rhombic VNMG form with 0.8 mm corner radius 0° clearance and 35° approach angle Suitable for continuous and light interrupted cuts High productivity for medium‑steel turning The insert is engineered around the T9215 CVD coating, a combination that balances wear resistance and fracture toughness, enabling higher cutting parameters on medium steels while maintaining surface quality. The TQ chipbreaker manages chip flow effectively during steady turning, which reduces tool rework and downtime. For production environments seeking to increase throughput, this geometry supports stable cut depths and consistent tool life, making the component a reliable choice for repetitive turning operations. Secure seating and dimensional fit for repeatable results Compatibility with the holder is determined by form, clearance angle, tolerance class, fixing, size and thickness; the rhombic VNMG shape with a cylindrical hole and standard ISO designation ensures accurate seating and simple indexability. The insert thickness of 4.76 mm and nominal size 16 are matched to common external holders, so clamping repeatability and positional stability are maintained. That repeatability translates directly into fewer part rejections and predictable machining cycles. Coating, grade and edge preparation that extend service life The combination of cemented carbide substrate and a CVD coating gives the cutting edge high thermal and abrasive resistance, suited to continuous and slightly interrupted cuts. The 0.8 mm corner radius promotes robust edge strength while still allowing good surface finish on turned components. For shops moving from general‑purpose grades to a more production‑oriented approach, this grade offers a clear cost‑to‑benefit improvement through longer intervals between indexings and fewer insert changes. For high‑productivity turning with the T9215 grade from Tungaloy, contact Metav Werkzeuge for application advice and ordering support via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6775269 Manufacturer SKU: TUN6775269 SKU: 6775269‑Tungaloy Model series: ISO‑turning indexable inserts Label: VNMG160408‑TQ T9215 Facts Corner radius: 0.8 mm Relief (clearance) angle: 0° Approach angle: 35° Insert thickness: 4.76 mm Insert size: 16 Manufacturer article number: 6775269 Special features CVD‑coated cemented carbide (grade T9215) TQ chipbreaker Rhombic VNMG form Cylindrical hole ISO designation: 160408 Application: turning (external and internal) Compatible with ISO holders matched by form, angle, tolerance, fixing, size and thickness FAQ What materials is this insert suited for? The VNMG160408‑TQ T9215 is specified for medium steel machining; the T9215 grade combines wear resistance and toughness for productive turning of such materials. Is the insert suitable for interrupted cuts? Yes, the T9215 grade and the robust 0.8 mm corner radius tolerate continuous to light interrupted cutting conditions without frequent edge failures. How does the TQ chipbreaker affect performance? The TQ chipbreaker promotes controlled chip formation and evacuation during steady turning, improving surface finish and reducing the risk of chip entanglement. Which holders are compatible with this insert? Compatibility depends on form, clearance angle, tolerance class, fixing, size and thickness; the ISO‑standard VNMG 160408 geometry fits common external and internal turning holders when the holder matches those parameters. What does the ISO code 160408 mean for setup? The ISO designation indicates size and geometry parameters (nominal size 16, thickness 4.76 mm, form 08), which aids in selecting the correct seat and clamping hardware for consistent results. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VNMG 160408 T9215 Wendeplatten - Tungaloy
VNMG 160408 T9215 Drehwendeschneidplatte für Drehen · Tungaloy Die VNMG 160408 T9215 ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen, ausgelegt für die mittlere Stahlbearbeitung und hohe Produktivität bei kontinuierlichem bis leicht unterbrochenem Schnitt. VNMG Drehwendeschneidplatte, ISO-genormt CVD-beschichtetes Hartmetall T9215 Für mittlere Stahlbearbeitung optimiert Rhombische Form mit 35° Winkel, mit Loch Eckenradius 0.8 mm, Spanbrecher 33 Effizienzsteigerung durch modern beschichteten Schneidstoff Die CVD-beschichtete T9215-Sorte kombiniert Verschleißwiderstand mit hoher Bruchsicherheit, was die Produktivität bei Serienläufen erhöht. Durch die Beschichtung wird die Lebensdauer der Wendeschneidplatte verlängert, was Standzeiten reduziert und Rüstintervalle seltener erforderlich macht. Diese Eigenschaft führt zu konstanteren Bearbeitungszeiten und planbaren Werkzeugwechseln, was insbesondere in längeren Produktionsläufen wirtschaftliche Vorteile bringt. Passgenauigkeit und Einbau in ISO-Haltersysteme Die Kompatibilität der Platte richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Der Freiwinkel 0° und die rhombische Form mit 35° definieren die Einbaulage im Halter; das zylindrische Loch vereinfacht die Fixierung mit Schraube und Unterlage. Beim Austausch sind Haltergeometrie und Spannsystem zu prüfen, damit die Platte sicher gespannt ist und die gewünschte Schnittführung realisiert wird. Typische Einsätze und materialgerechte Auswahl Einsatzgebiet ist vorwiegend das Außen- und Innendrehen von Stahlteilen mittlerer Festigkeit, sowohl bei kontinuierlichen als auch leicht unterbrochenen Schnitten. Die Kombination aus Spanbrecher 33 und dem Eckenradius 0.8 mm eignet sich für Anwendungen, die stabile Spanbildung und reproduzierbare Schnittkräfte erfordern. Für andere Werkstoffe oder stärkere Unterbrechungen sollte die passende Sorte und ein alternativer Spanbrecher gewählt werden. Werkstoff, Handhabung und Praxistipps Die Wendeschneidplatte besteht aus Hartmetall und ist CVD-beschichtet, wodurch Verschleiß reduziert und Schneidkantenstabilität erhöht wird. Der Eckenradius beeinflusst die Oberflächengüte und die Schnittkraft: Ein Radius von 0.8 mm bietet eine gute Balance zwischen Kantenschärfe und Stabilität. Beim Einbau Schutzklemmung und Anzugsmoment beachten, um Bruchrisiken zu minimieren und Wiederholgenauigkeit zu sichern. Empfehlung: Für zuverlässige und produktive Drehprozesse die VNMG 160408 T9215 von Tungaloy über Metav Werkzeuge anfragen; technische Beratung und Bestellung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 6773913 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160408-33 T9215 Hersteller SKU: TUN6773913 Fakten Winkel: 35° Freiwinkel: 0° Eckenradius: 0.8 mm Plattengröße: 16 mm Spanbrecher: 33 Besonderheiten Material: Hartmetall Beschichtung: T9215 (CVD: chemische Gasphasenabscheidung) Form: Rhombisch Lochstil: zylindrisches Loch Anwendung: Außen- und Innendrehen Modellserie: ISO-Drehwendeschneidplatten Schneidstofftyp: CVD-beschichtetes Hartmetall Kompatibilität: bestimmt durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke FAQ Für welche Werkstoffe ist die VNMG 160408 T9215 am besten geeignet? Die VNMG 160408 T9215 von Tungaloy ist erste Wahl für die mittlere Stahlbearbeitung; durch das CVD-beschichtete Hartmetall lässt sich ein guter Kompromiss aus Standzeit und Bruchsicherheit erzielen. Welche Vorteile bietet die T9215-Beschichtung gegenüber unbeschichteten Sorten? Die T9215-Beschichtung erhöht den Verschleißwiderstand und die Schneidkantenstabilität, was zu längeren Standzeiten und konstanteren Bearbeitungsergebnissen bei der VNMG160408-33 T9215 führt. Wie wirkt sich der Eckenradius 0.8 mm auf das Ergebnis aus? Der Eckenradius 0.8 mm sorgt für stabile Spanbildung und höhere Kantensicherheit; das führt zu gleichmäßiger Oberfläche und reduziertem Kantenausbruch bei der Bearbeitung mittlerer Stähle. Worauf ist beim Einbau in den Halter besonders zu achten? Beim Einbau der VNMG160408-33 T9215 sind Freiwinkel, Form und korrekte Spannung wichtig; das zylindrische Loch und die passende Unterlage gewährleisten sichere Fixierung und Wiederholgenauigkeit. Kann die Platte bei unterbrochenem Schnitt eingesetzt werden? Ja, die Sorte T9215 eignet sich für kontinuierlichen bis leicht unterbrochenen Schnitt; bei starken Unterbrechungen sollte eine robustere Sorte oder ein anderer Spanbrecher gewählt werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160408 T9215 Wendeplatten - Tungaloy
High wear resistance and reliable fracture toughness make the VNMG160408‑ZF T9215 a strong choice for efficient steel turning; its CVD‑coated carbide grade and 0° rake angle support stable cutting and sustained productivity in continuous and lightly interrupted operations. Order the insert directly via Metav Werkzeuge or consult the advisers for holder compatibility and cutting‑condition recommendations. VNMG160408‑ZF 160408 T9215 turning insert — CVD‑coated carbide, 0° rake | Tungaloy The VNMG160408‑ZF T9215 is an ISO‑standard rhombic turning insert engineered for mid‑range steel machining with a focus on productivity and chip control. ISO rhombic insert VNMG form CVD-coated carbide grade T9215 0° rake angle for predictable chip flow Compatible with cylindrical-hole holders Faster, more productive steel turning with consistent tool life The combination of CVD‑coated surface treatment and a wear‑resistant carbide substrate in grade T9215 provides a balance between abrasion resistance and toughness that is particularly suited to medium‑range steel machining. This results in less frequent insert changes and more stable process windows, which directly improves cycle times and overall output. The coating reduces adhesive wear and helps to maintain edge integrity during continuous cuts, while the substrate absorbs intermittent shock in light interrupted turning, improving life expectancy under industrial workloads. Stable cutting geometry and controllable chip formation The ISO rhombic geometry (VNMG) with a 0.8 mm corner radius and 0° rake angle delivers repeatable contact conditions and predictable chip behaviour. The chipbreaker ZF is designed to split and curl chips effectively in typical steel applications, reducing the risk of long, entangling chips and supporting automated material handling. The nominal 35° approach angle promotes a favourable balance between radial engagement and cutting force distribution, lowering vibration and enabling better surface finishes without sacrificing metal removal rate. Compatibility, mounting and application guidance for reliable integration As an ISO‑standard turning insert, compatibility with holders depends on form, clearance angle, tolerance class, fastening method, size and thickness; the VNMG160408‑ZF is supplied with a cylindrical hole and a standard thickness of 4.76 mm, making it suitable for most VNMG‑capable external holders and boring bars. The typical system assembly comprises the insert, a matching external holder or boring bar, shim/locking set and replacement screws. Selection of the correct chipbreaker and grade should align with workpiece stability and the intended cutting mode—continuous or slightly interrupted turning—to exploit the insert’s productivity advantages while preserving tool life. Choose the Tungaloy VNMG160408‑ZF T9215 for productive, repeatable steel turning and contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6772354 Manufacturer SKU: TUN6772354 Label / designation: VNMG160408-ZF T9215 Numbers / Core data Corner radius: 0.8 mm Plate thickness: 4.76 mm Plate size: 16 mm ISO designation: 160408 Approach angle: 35° Rake angle: 0° Designs / Special features Material: carbide Coating: CVD‑coating Grade: T9215 Geometry: VNMG (rhombic) Chipbreaker: ZF Hole style: cylindrical hole (with hole) Typical application: turning Model series: ISO turning inserts FAQ What materials is this insert intended for? The VNMG160408‑ZF T9215 is optimised for medium‑range steel machining; the T9215 grade combines wear resistance with toughness for productive turning. How does the chipbreaker ZF affect machining? The ZF chipbreaker is designed to control and curl chips for safer evacuation during continuous and light interrupted cuts, reducing the risk of chip entanglement. Can the VNMG160408‑ZF be used in interrupted cuts? Yes, the carbide substrate and CVD‑coating of the VNMG160408‑ZF T9215 provide sufficient toughness for light interruptions while maintaining edge life. Which holder features are required for correct mounting? Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; the insert is supplied with a cylindrical hole for standard VNMG holders. Is this insert suitable for automatic production environments? The combination of predictable chip control, robust geometry and a wear‑resistant coating makes the VNMG160408‑ZF T9215 well suited to automated turning applications where consistent tool life is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160408 T9215 Wendeplatten - Tungaloy
VNMG 160408 T9215 VNMG160408-DM T9215 Drehen — Tungaloy Die VNMG160408-DM T9215 ist eine ISO-genormte Wendeschneidplatte für das Drehen, ausgelegt für produktive Bearbeitung mittlerer Stahlqualitäten CVD-beschichtetes Hartmetall für hohe Standzeit Optimierter Spanformer DM für stabile Spanbildung ISO-Form VNMG sorgt für einfache Halterkompatibilität Mit zylindrischem Loch für sichere Befestigung Produktleistung für wirtschaftliche Serienbearbeitung Die VNMG160408-DM T9215 verbindet CVD-Beschichtung und Hartmetall zu einer Kombination, die Verschleißwiderstand und Bruchsicherheit erhöht. Dadurch lassen sich Schnittgeschwindigkeiten und Teilezahlen in Serienprozessen steigern, ohne die Werkzeugstandzeit drastisch zu reduzieren. Die klare Abstimmung auf mittlere Stahlbearbeitung sorgt für konstante Ergebnisse bei kontinuierlichem bis leicht unterbrochenem Schnitt. Anwendungsprofil und Werkstoffkompatibilität Für das Drehen ist die Platte für Außen- und Innendrehbearbeitungen geeignet; die Auswahl des passenden Spanformers und der Sorte richtet sich nach Werkstoff und Stabilität der Aufspannung. Die ISO-Norm erleichtert die Kombination mit passenden Außenhaltern oder Bohrstangen, wobei Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke die Kompatibilität bestimmen. Die Sorte T9215 ist erste Wahl bei mittleren Stahlqualitäten und bietet eine ausgewogene Balance zwischen Standzeit und Zerspanungsleistung. Praxisnahe Hinweise für Einsatz und Werkzeugauswahl Beim Einsatz empfiehlt sich die Prüfung der Halterpassung sowie die Beachtung des Eckenradius 0,8 mm und des Freiwinkels 0° für die gewünschten Oberflächengüten. Der Spanbrecher DM unterstützt die Spanaufsplitterung bei mäßigen Schnittbedingungen und trägt zur Prozesssicherheit bei. Für Rückfragen zur optimalen Schnittwertwahl oder zur Halterkompatibilität steht die technische Beratung gerne zur Verfügung Empfehlung: Für wirtschaftliche Drehprozesse die Tungaloy-Wendeschneidplatte nutzen und bei technischen Fragen unsere Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren Produktmerkmale Artikelnummer: 6772364 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160408-DM T9215 SKU: 6772364-Tungaloy Daten Eckenradius: 0,8 mm Winkel: 35° Freiwinkel: 0° Plattengröße: 16 mm Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall (verbessert den Verschleißwiderstand) Sorte: T9215 (für mittlere Stahlbearbeitung) Spanbrecher: DM (Spanformer DM: für mittlere Schnittbedingungen) Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: rhombisch Anwendung: Drehen ISO-Bezeichnung: 160408 FAQ Wie unterscheidet sich die Sorte T9215 von anderen Hartmetallsorten? Die Sorte T9215 von Tungaloy bietet eine speziell abgestimmte CVD-Beschichtung und ist für die mittlere Stahlbearbeitung konzipiert; sie kombiniert Verschleißwiderstand mit Bruchsicherheit für konstante Produktivität. Welche Rolle spielt der Spanbrecher DM bei dieser Platte? Der Spanbrecher DM sorgt für kontrollierte Spanbildung unter mittleren Schnittbedingungen und unterstützt eine stabile Zerspanung bei kontinuierlichen und leicht unterbrochenen Schnitten. Wie finde ich den passenden Halter für diese Platte? Kompatibilität wird durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt; bei Unsicherheiten helfen Maßblätter oder die technische Beratung weiter. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, reliable geometry and broad holder compatibility for efficient medium-steel turning; order the VNMG160408 T9215 directly via Metav Werkzeuge or ask our consultants if needed. VNMG160408 T9215 — ISO turning insert VNMG 160408 for turning, CVD-coated carbide, 35° by Tungaloy The VNMG160408 T9215 is an ISO rhombic indexable insert designed for external and internal turning; it pairs a CVD-coated carbide grade with a 35° geometry for productive medium-steel machining. CVD-coated carbide for high wear resistance Optimised for medium steel machining Rhombic VNMG 16 profile, 35° cutting angle 0.8 mm corner radius with cylindrical hole Higher productivity through a wear-resistant carbide grade The CVD-coated T9215 grade combines elevated wear resistance with maintained fracture toughness, making it suitable for continuous to slightly interrupted cuts in medium steel. This balance reduces indexable insert change frequency and supports longer uninterrupted production runs, which translates into measurable gains in process efficiency and tool-life reliability. The coating protects the substrate while the carbide core ensures dimensional stability under load. Consistent clamping and geometry for precise turning results The rhombic VNMG profile with a 35° cutting angle and 0.8 mm corner radius provides a reliable compromise between edge strength and surface finish. The insert is supplied with a cylindrical hole for secure mounting; compatibility with a chosen holder depends on insert form, clearance angle (0°), tolerance class, fastening and size. Users benefit from predictable cutting behaviour when the correct holder and clamping set are selected, improving repeatability and part quality. Practical application notes and selection advice for turning Designed specifically for turning operations, the insert supports both external and internal machining when paired with a matching outer holder or boring bar, clamping support and replacement screws. The double-sided chipbreaker allows economical use of both cutting edges, while the ISO standard designation simplifies selection across tool holders. For best results, match chipbreaker and grade to workpiece stability and machining type; technical support is available for application optimisation and compatibility checks. For reliable, high-productivity turning with Tungaloy quality, contact Metav Werkzeuge for availability and application advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6772366 Manufacturer SKU: TUN6772366 Brand: Tungaloy Designation: VNMG160408 T9215 Material: carbide Core data ISO designation: 160408 Insert size: 16 mm Corner radius: 0.8 mm Relief angle: 0° Cutting angle: 35° Mounting: with cylindrical hole Special features CVD-coated carbide grade T9215 Rhombic VNMG profile, double-sided chipbreaker Suited for medium steel machining Designed for continuous to slightly interrupted cuts ISO-standard indexable turning insert FAQ What materials is this insert intended for? The VNMG160408 T9215 insert is optimised for medium steel machining; the CVD-coated carbide grade T9215 offers wear resistance and toughness appropriate for this material class. Is the insert compatible with standard VNMG holders? Compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; the VNMG160408 T9215 is ISO-standard and fits holders designed for VNMG 160408 geometry. How does the 0.8 mm corner radius influence results? A 0.8 mm corner radius increases edge strength for more robust cutting and helps achieve balanced surface finish and tool life when machining medium steel with appropriate feeds and stability. Can both sides of the insert be used? Yes, the insert features a double-sided chipbreaker design, allowing economical use of multiple cutting edges before replacement. What role does the CVD coating play? The CVD coating on the T9215 grade enhances wear resistance and contributes to longer edge life under continuous to slightly interrupted cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160408 T9225 Wendeplatten - Tungaloy
Benefit from a robust, CVD-coated T9225 grade that balances toughness and wear resistance for dependable medium-to-heavy steel turning; the insert’s ISO form and secure clamping characteristics ensure predictable set-ups and reduced downtime. Order original Tungaloy inserts directly via Metav Werkzeuge or consult the specialists for application advice. VNMG160408 T9225 — ISO turning insert for medium-to-heavy steel turning by Tungaloy VNMG160408 T9225 is an ISO‑normed, rhomboid indexable insert designed for external and internal turning applications, featuring a CVD‑coated cemented carbide grade for robust performance under variable cutting conditions CVD-coated cemented carbide grade T9225 Robust universal grade for mid–heavy steel turning Double-sided chipbreaker for stable chip control Rhomboid VNMG size 16 with 0° clearance angle Consistent performance with a tough CVD-coated grade The CVD‑coated T9225 grade combines a wear‑resistant surface with a tough substrate to deliver reliable tool life under mixed cutting conditions. As a cemented carbide solution, the insert is engineered to resist flank wear while maintaining cutting edge integrity during mildly interrupted cuts and heavier engagement. This balance of hardness and toughness reduces unexpected tool changes and contributes to a more stable production rhythm, making the component suitable for demanding turning tasks in steel machining. Secure fit and ISO compatibility for quick set-up The insert’s ISO conformity and rhomboid geometry simplify selection of a compatible external holder: compatibility is determined by form, 0° relief angle, tolerance class, clamping method, size and thickness. The rhomboid shape with a cylindrical hole ensures accurate seating and repeatable indexing, while the double-sided chipbreaker supports consistent chip control on both cutting edges. These features shorten set-up time, lower the risk of mounting errors and support process repeatability across batches and operators. Practical cutting behaviour and system integration A 0.8 mm corner radius improves corner strength and workpiece finish without excessively increasing cutting forces, and the specified 35° cutting edge angle helps direct chip flow for the chosen turning direction. The insert functions as part of a complete system comprising an indexable insert, matching external holder or boring bar, backing shim and clamping set; matching components and correct clamping geometry are decisive for achieving the advertised performance. For further specification checks or application recommendations, technical advice is available via info@metav-werkzeuge.com or by phone at +49 2822 7131930, ensuring the component integrates seamlessly into existing tool setups. Contact Metav Werkzeuge for tailored application advice and to source original Tungaloy VNMG160408 T9225 inserts for reliable medium‑to‑heavy steel turning Technical data Article number: 6780748 Manufacturer SKU: TUN6780748 SKU: 6780748-Tungaloy Model series: ISO turning inserts Designation: VNMG160408 T9225 Facts Corner radius: 0.8 mm Plate size: 16 mm Cutting edge angle: 35° Relief angle: 0° Special features Material: cemented carbide Coating: CVD Double-sided chipbreaker Rhombic plate with cylindrical hole ISO‑normed indexable insert for turning Suitable for medium to heavy steel turning FAQ What materials is this insert suitable for machining? The VNMG160408 T9225 insert from Tungaloy is engineered primarily for medium‑to‑heavy steel turning, where toughness and wear resistance are required. Is the insert reversible or indexable? Yes, the VNMG160408 T9225 features a double‑sided chipbreaker, providing reuse of the alternative cutting edge through indexing to extend overall tool life. Which holder types are compatible with this insert? Compatibility requires a matching ISO external turning holder or boring bar that corresponds to the insert form, tolerance class, clamping method, size and thickness; the VNMG160408 designation guides the correct holder selection. What performance does the T9225 grade offer? The T9225 CVD‑coated cemented carbide grade delivers a balance of wear resistance and toughness, well suited to variable cutting conditions and slightly interrupted cuts in steel machining. How does the corner radius affect machining results? A 0.8 mm corner radius increases edge strength and typically improves surface finish while offering a compromise between robustness and cutting load for the VNMG160408 T9225 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VNMG 160408 T9225 Wendeplatten - Tungaloy
The combination of a CVD‑coated carbide grade and a robust rhombic geometry ensures reliable performance in medium to heavy steel turning while simplifying tool management; order the insert directly via Metav Werkzeuge or contact the consultants for compatibility checks. VNMG160408-PS T9225 — ISO turning insert by Tungaloy, CVD‑coated carbide for turning The VNMG160408-PS T9225 is an ISO‑standard rhombic indexable turning insert designed for external and internal turning, providing a balance of toughness and wear resistance for interrupted cuts and variable engagement conditions. CVD-coated carbide grade T9225 Universal grade for medium to heavy steel Rhombic VNMG form with 0.8 mm radius Compatible with ISO holders; cylindrical hole Consistent edge life for variable turning conditions The insert delivers a combination of toughness and wear resistance through its CVD coating and carbide substrate, optimised for steel machining. The T9225 grade is formulated as a universal choice for medium to heavy steel turning where changing cut conditions or light interruptions demand additional fracture resistance. This results in fewer indexings and more predictable tool life, which supports continuous production and reduces unplanned downtime. Geometry and chip control that enhance stability Engineered in the VNMG rhombic form with a 0.8 mm corner radius and a 35° approach, the geometry promotes stable cutting forces and reliable seating in standard ISO holders. The PS chipbreaker manages chip formation for typical steel grades, aiding chip evacuation and surface finish without excessive cutting force. The insert’s cylindrical centre hole enables secure clamping and straightforward replacement in compatible toolholders. Practical compatibility and workshop integration As an ISO‑conforming insert, fitment to a suitable external holder, boring bar or clamping kit is determined by the insert’s form, relief angle (0°), tolerance class, fixing method, size (16 mm nominal), and thickness where applicable. The indexable design simplifies inventory: a single insert type covers a broad spectrum of turning tasks, reducing tool diversity while maintaining flexibility for both external and internal operations. Material scope and recommended use This grade is particularly effective on unalloyed and alloyed steel, where medium to heavy cuts are common and occasional interruptions occur. The combination of carbide substrate and CVD coating gives a reliable balance between toughness and wear resistance; for very soft, non-ferrous or high‑temperature alloys, selection of a more specialised grade should be considered. The insert is intended primarily for conventional turning tasks rather than finishing applications that require ultra‑fine edge radii. Handling, selection and maintenance tips Select the insert together with a holder that matches the VNMG form, clearance and clamping style; verify the cylindrical hole and seating arrangement for proper torque and contact. Maintain a modest inventory of spare screws and clamping pads for rapid changeover. Regular inspection of cutting edges will maximise productivity and help determine optimal index intervals, leading to a predictable machining cycle and lower overall tooling costs. Discuss application specifics and availability with Metav Werkzeuge; our consultants can verify holder compatibility and recommend cutting parameters based on workpiece material and machine capability Technical data Article number: 6796055 Manufacturer SKU: TUN6796055 SKU: 6796055-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm ISO designation: 160408 Insert size: 16 (nominal) Relief angle: 0° Approach/wedge angle: 35° Special features Carbide substrate with CVD coating Grade: T9225 (universal, medium to heavy steel) Chipbreaker: PS Form: VNMG (rhombic) Centre hole: cylindrical, with hole Application: external and internal turning Compatible with ISO toolholders and boring bars FAQ What materials is this insert suitable for? The VNMG160408-PS T9225 insert is designed primarily for steel, covering unalloyed and alloyed steels in medium to heavy turning operations. How does the T9225 grade behave under interrupted cuts? The T9225 grade provides increased toughness compared with pure wear grades, making the insert more resistant to chipping during light interruptions or variable engagement. Which chipbreaker is fitted and what is its benefit? The insert uses the PS chipbreaker to promote controlled chip formation and evacuation in common steel turning tasks, improving surface finish and reducing the risk of chip entanglement. Is the insert compatible with standard VNMG holders? Compatibility depends on the holder’s form, clearance, clamping and tolerance class; the VNMG form and cylindrical centre hole are standard features, so the insert is compatible with most ISO VNMG holders when dimensions and clamping method match. What does the 0.8 mm radius mean for my parts? A 0.8 mm corner radius offers a compromise between strength and surface finish: it supports robust edges for heavier cuts while still allowing reasonable part geometry and acceptable finishes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160408 T9225 Wendeplatten - Tungaloy
VNMG160408 160408 T9225 Wendeplatte von Tungaloy für Drehen Die VNMG160408 160408 T9225 Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte, entwickelt für Außen- und Innendrehen bei mittleren bis schweren Stahleinsätzen. ISO-genormte VNMG-Form für universellen Einsatz CVD-beschichtetes Hartmetall für hohe Standzeit Robuste Universalsorte T9225 für wechselnde Schnitte Rhombische Form mit Radius 0,8 mm für Stabilität Doppelseitiger Spanbrecher, zylindrisches Loch Effizienz und Prozesssicherheit bei der Stahldrehung Die Wendeplatte bietet durch die CVD-Beschichtung und den verschleißfesten Hartmetall-Schneidstoff eine verbesserte Standzeit und konstante Bearbeitungsergebnisse. Für Anwender bedeutet das weniger Werkzeugwechsel und höhere Maschinenauslastung, was die Produktivität in der Fertigung direkt steigert. Besonders bei wechselnden Eingriffsbedingungen sorgt die Sorte T9225 für ausreichende Zähigkeit und vermeidet vorzeitigen Kantenverschleiß. Werkstoffkompetenz und Schneidstoffprofil Der Schneidstofftyp ist CVD-beschichtetes Hartmetall, eine Kombination aus zäher Substratlegierung und dünner, harter Deckschicht. CVD (chemische Gasphasenabscheidung) erhöht die Verschleißfestigkeit und Wärmebeständigkeit. Das Resultat ist verbesserte Kantenschärfe bei mittleren bis schweren Stahlbearbeitungen und damit reproduzierbare Oberflächenqualität bei höheren Schnittdaten. Konstruktion, Abmessungen und Halterkompatibilität Die rhombische Plattenform mit Eckenradius 0,8 mm und Plattendicke 4,76 mm bietet mechanische Stabilität und Steifigkeit am Werkzeugträger. Die VNMG-Geometrie ist ISO-genormt; Halterkompatibilität wird über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke sichergestellt. Das zylindrische Loch erleichtert zentrierte Aufspannung und sichert wiederholgenaue Positionierung. Einsatzbereiche, Anwenderkreis und Auswahlempfehlung Die Platte ist ausgelegt für Anwender in der Serienfertigung und in Kleinserien, die zuverlässige Ergebnisse beim Drehen von Stahl erwarten. Fertigungsleiter und Zerspaner profitieren von der universellen Einsetzbarkeit der T9225-Sorte in Situationen mit wechselnder Schnittstabilität. Bei unklaren Schnittbedingungen empfiehlt sich die Abstimmung von Schnittdaten und Spanbrecherwahl mit der Fertigungsleitung. Empfehlung: Für produktive Stahldrehoperationen lohnt sich die Auswahl der VNMG160408 Tungaloy-Wendeplatte T9225; bei Prüfbedarf oder Fragen kontaktieren Sie unseren technischen Vertrieb unter info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: 6780880 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160408 Fakten Radius: 0,8 mm Winkel: 35° Plattendicke: 4,76 mm Plattengröße: 16 mm Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: T9225 Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD: chemische Gasphasenabscheidung) Plattenform: rhombisch Spanbrecher: doppelseitig Loch: mit Loch Lochstil: zylindrisches Loch FAQ Welche Werkstoffe lassen sich mit der Platte bearbeiten? Die VNMG160408 Tungaloy-Wendeplatte T9225 eignet sich primär für Stahlbearbeitung; die Sorte T9225 ist als robuste Universalsorte für mittlere bis schwere Stahlschnitte ausgelegt. Ist die Platte beidseitig verwendbar? Ja, die Platte verfügt über einen doppelseitigen Spanbrecher, sodass sie nach dem Wenden erneut genutzt werden kann; dies erhöht die Wirtschaftlichkeit in der Fertigung. Wie beeinflusst die CVD-Beschichtung die Standzeit? Die CVD-Beschichtung verbessert die Wärme- und Abriebfestigkeit des Hartmetalls, was bei der VNMG160408 T9225 zu längeren Standzeiten und stabiler Kantenleistung führt. Welche Rolle spielt der Eckenradius 0,8 mm? Der Eckenradius 0,8 mm bietet eine gute Kombination aus Kantenschärfe und Stabilität, was präzise Oberflächen und reduzierte Kantenabbrüche bei mittleren Schnittparametern ermöglicht. Wie lässt sich die Platte am Halter sichern? Die ISO-konforme Geometrie plus zylindrisches Loch ermöglichen zentrierte Aufspannung; Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Gibt es eine Empfehlung für Schnittdaten? Schnittdaten sind abhängig von Werkstückmaterial und Aufspannung. Für die VNMG160408 T9225 empfehlen sich abgestimmte Parameter je nach Maschinensteifigkeit und Stabilität der Schnittbedingungen; für konkrete Werte die technische Beratung nutzen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade that handles medium-to-heavy steel, precise ISO geometry for easy holder compatibility, and a proven ZF chipbreaker for controlled chip formation; order the VNMG160408-ZF T9225 directly via Metav Werkzeuge or consult our team for application support. VNMG160408-ZF T9225 ISO turning insert (VNMG 160408) for turning – Tungaloy The VNMG160408-ZF T9225 is an ISO-standard turning insert designed for medium-to-heavy steel machining, offering robust edge stability and a ZF chipbreaker for reliable chip control. CVD-coated carbide grade T9225 Universal grade for medium-to-heavy steel Rhombic 16 mm insert, 0.8 mm corner Cylindrical hole and ZF chipbreaker Consistent life and lower tooling costs through a robust grade The combination of a CVD-coated surface and a carbide substrate gives the insert high wear resistance while preserving core toughness, which leads to longer tool life in heavy-duty operations. The T9225 grade is formulated as a robust universal option for steel turning; it performs particularly well under changing engagement conditions or slightly interrupted cuts. This balance reduces the frequency of insert changes and supports steadier production cycles, translating into measurable efficiency gains on the shop floor. Geometry tuned for strength and predictable surface finish The rhombic form with a 16 mm datum and a 0.8 mm corner radius balances cutting-edge strength with surface finish quality. A sharper corner radius improves finish but reduces edge strength; the chosen radius here offers a compromise suitable for many external and internal turning tasks. The neutral 0° rake angle contributes to force stability in heavier cuts. Because the insert conforms to ISO-standard dimensions, replacement and holder interchangeability are straightforward when form, clearance, tolerance class, fastening, size and thickness are matched. Controlled chips and secure clamping minimise interruptions The chipbreaker ZF is designed to modify chip flow for medium-to-heavy steel cuts, producing manageable chip segments that reduce the risk of entanglement and re-cutting. Combined with a cylindrical hole for secure clamping, the insert integrates into a system comprising the insert, an appropriate external holder or boring bar, a shim or clamp set and replacement screws. This system approach reduces downtime by ensuring predictable chip behaviour and reliable mechanical retention during continuous production. Practical selection tips for workshop and CNC environments Ideal for CNC turning centres and job-shop production where material mix and variable cutting conditions occur, this insert is best used with a holder matched to the VNMG form and the ISO code 160408. Choose the ZF chipbreaker and the T9225 grade when machining steel where occasional interruptions or varying engagement demand greater toughness. For high-stability setups prioritising surface finish, consider a smaller corner radius; where robustness is critical, maintain the 0.8 mm radius. If further guidance on holder compatibility or machining parameters is required, technical consultation is available to support the selection process. Contact Metav Werkzeuge for technical advice and rapid supply of the Tungaloy VNMG160408-ZF T9225; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780861 Manufacturer SKU: TUN6780861 SKU: 6780861-Tungaloy Designation: VNMG160408-ZF T9225 Material: carbide Core data Insert size: 16 mm Thickness: 4.76 mm Corner radius: 0.8 mm Included angle: 35° Rake angle: 0° ISO code: 160408 Hole: with cylindrical hole Special features Grade: T9225 (CVD-coated carbide) Chipbreaker: ZF Plate shape: rhombic Application: turning Series: ISO turning inserts Compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ Which materials is this insert best suited for? The Tungaloy VNMG160408-ZF T9225 is optimised for medium-to-heavy steel machining; the robust T9225 grade and CVD-coated surface provide wear resistance and toughness for varying engagement conditions. How can I ensure holder compatibility for this insert? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; match the VNMG geometry and ISO code 160408 to the holder specifications for correct fitment. What advantage does the ZF chipbreaker offer? The chipbreaker ZF provides improved chip segmentation in medium-to-heavy cuts, reducing entanglement and helping maintain process stability during continuous turning operations. Is this insert suitable for interrupted cuts? Yes, the universal T9225 grade offers increased toughness for slightly interrupted cuts and fluctuating engagement, making it a reliable choice for variable machining scenarios. What clamping method is recommended for secure retention? Use a standard ISO-compatible clamping system with a shim or clamp and the correct screw set; the cylindrical hole design supports secure clamping in both external holders and boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160408 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD-coated carbide grade designed for mixed and interrupted cuts and a 0.8 mm corner radius that improves stability and tool life for medium to heavy steel turning; order directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. VNMG160408-PM T9225 ISO turning insert by Tungaloy — CVD-coated carbide, 0.8 mm radius The VNMG160408-PM T9225 is an ISO rhombic indexable turning insert engineered for medium to heavy steel turning, delivering a balance of toughness and wear resistance for variable engagement conditions. VNMG160408-PM T9225 ISO rhombic insert CVD-coated carbide for robust steel machining 0.8 mm corner radius for stable cutting 35° lead angle with cylindrical mounting hole Greater process reliability under variable cutting conditions The CVD-coated T9225 grade combines toughness with wear resistance to maintain cutting-edge stability during moderately interrupted cuts. As a result, production quality becomes more consistent and downtimes are reduced. The rhombic geometry and the 35° lead angle provide a controlled cutting action, which helps to lower vibration and extend service intervals for holders and toolposts. This leads to measurable efficiency gains on batch and single-piece turning operations. Improved chip control and predictable surface finish Equipped with the PM chipbreaker, this insert promotes regular chip formation across a range of depths of cut and feed rates. Predictable chip shape decreases the risk of tool damage and workpiece rework while supporting faster throughput. The combination of chip geometry and CVD-coated carbide enhances surface integrity when machining medium to heavy steel, translating into fewer secondary operations and a more favourable cost-per-part metric. Seamless integration into ISO tool systems for flexible tooling Designed to ISO standards, the insert fits conventional external holders or boring bars where compatibility is determined by form, clearance angle, tolerance class, attachment method, size and thickness. The central cylindrical mounting hole ensures reliable fixation and straightforward indexability, enabling rapid tool changes and minimal setup time. Such standardisation simplifies tooling inventory and supports leaner workshop practices. Material versatility and targeted application benefits This carbide grade is aimed primarily at steel turning and offers robustness when cutting conditions fluctuate; the insert is a universal choice when greater toughness is required. The 0.8 mm corner radius offers a compromise between edge strength and the ability to produce defined radii on the workpiece, making the insert suitable for both external profiling and light finishing passes. For operations demanding higher abrasion resistance or for non-ferrous alloys, selection of a different grade should be considered. For availability, batch purchasing or tailored recommendations on Tungaloy turning inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert support and fast delivery. Technical data Article number: 6796099 Manufacturer SKU: TUN6796099 SKU: 6796099-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts ISO designation: 160408 Plate size: 16 Corner radius: 0.8 mm Lead/relief angle: 35° Clearance angle: 0° Special features Material: Carbide Grade/coating: T9225, CVD-coated carbide Geometry: Rhombic insert Chipbreaker: PM Mounting: with hole, cylindrical hole Typical application: Turning (external and internal) FAQ What materials is this insert intended for? The VNMG160408-PM T9225 insert is formulated for steel machining, particularly medium to heavy turning where toughness and wear resistance are required. Can the insert handle interrupted cuts? Yes, the CVD-coated T9225 grade is designed to tolerate moderately interrupted cuts and variable engagement without compromising edge life. Which chipbreaker is fitted and what benefit does it offer? The insert uses the PM chipbreaker, which encourages consistent chip formation and improved chip evacuation for stable production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160408 T9225 Wendeplatten - Tungaloy
VNMG160408 T9225 Drehwendeschneidplatte (VNMG) von Tungaloy für Drehen Die VNMG160408 T9225 ist eine ISO-genormte Rhombus-Wendeplatte für robustes Außen- und Innendrehen in der mittleren bis schweren Stahlbearbeitung VNMG160408 T9225 ISO-genormte Rhombusplatte CVD-beschichtetes Hartmetall für lange Standzeit Doppelseitiger Spanbrecher für effiziente Spanbildung Mit zylindrischem Loch, kompatibel zu Haltern Für mittlere bis schwere Stahlbearbeitung konzipiert Dauerhafte Schneidleistung durch Material und Beschichtung Die Wendeplatte besteht aus hochwertigem Hartmetall mit CVD-Beschichtung, was eine hohe Verschleißfestigkeit und konstante Schneidkante ermöglicht. Durch die Beschichtungsart bleibt die Standzeit bei wechselnden Schnittbedingungen stabil, sodass sich Ausschuss reduziert und Nacharbeit minimiert. Ein weiterer Vorteil ist die gute Wärmebeständigkeit der Beschichtung, die bei intermittierenden Schnitten die Lebensdauer der Platte erhöht. Einsatzspektrum und Bearbeitungsnutzen Im Einsatz überzeugt die Platte beim Außen- und Innendrehen von Stahlbauteilen; speziell bei wechselnden Eingriffsbedingungen sorgt die Zähigkeit der Sorte für sichere Zerspanung. Die Kombination aus Rhombusform und Eckenradius ermöglicht reproduzierbare Oberflächenqualitäten, während der doppelseitige Spanbrecher die Spanform kontrolliert und so die Prozessstabilität verbessert. Dies führt zu planbarem Werkzeugwechsel und geringeren Stillstandzeiten in der Fertigung. Kompatibilität und Auswahlhinweise für Halter Die Kompatibilität zur Halterung richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Die Platte ist mit zylindrischem Loch ausgeführt und eignet sich für Standard-Außenhalter und Bohrstangen mit passender Aufnahme. Beim Auswählen der passenden Ausführung empfiehlt sich die Abstimmung auf Haltergeometrie und Werkstückstabilität, um das volle Potenzial der Universalsorte T9225 zu nutzen. Zielgruppe und wirtschaftlicher Vorteil Die Platte richtet sich an Lohnfertiger und Serienproduzenten, die auf zuverlässige, produktive Zerspanung angewiesen sind. Durch die robuste Sortenzusammensetzung lassen sich Prozesse effizienter planen, Werkzeugwechselintervalle verlängern und Gesamtstückkosten senken. Heikle Randbedingungen, wie leicht unterbrochene Schnitte, werden durch die erhöhte Zähigkeit kompensiert, wodurch Ausschusspotenzial reduziert wird. Empfehlung: Die VNMG160408 T9225 von Tungaloy für wirtschaftliche und prozesssichere Stahlbearbeitung direkt bei Metav Werkzeuge anfragen — eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6781249 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160408 T9225 Tungaloy-Wendeplatte SKU Hersteller: TUN6781249 Fakten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Plattengröße: 16 Winkel: 35° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: CVD (chemische Gasphasenabscheidung, verschleißfest) Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen Sorte: T9225 (robuste Universalsorte für mittlere bis schwere Stahlbearbeitung) FAQ Welche Schneidstoffeigenschaft zeichnet die VNMG160408 T9225 besonders aus? Die VNMG160408 T9225 von Tungaloy nutzt eine CVD-beschichtete Hartmetallsorte, die erhöhte Verschleißfestigkeit und Zähigkeit kombiniert, wodurch Standzeiten und Prozesssicherheit bei Stahlbearbeitung verbessert werden. Ist die Wendeplatte mit Standard-Außenhaltern kompatibel? Ja, die Platte ist mit zylindrischem Loch ausgeführt und passt zu gängigen Außenhaltern, sofern Form, Freiwinkel und Befestigungsmaß des Halters mit der VNMG-Ausführung übereinstimmen. Für welche Werkstoffe ist die Platte besonders geeignet? Die T9225 Sorte ist für die Bearbeitung von Stahl konzipiert und eignet sich besonders bei mittleren bis schweren Schnitten sowie wechselnden Eingriffsbedingungen. Wie trägt der doppelseitige Spanbrecher zur Prozessstabilität bei? Der doppelseitige Spanbrecher formt Span und bricht ihn zuverlässig, was die Spanabfuhr verbessert und die Oberflächenqualität stabilisiert; dadurch sinkt das Risiko von Werkzeug- und Maschinenschäden. Welche Maße sind für die Auswahl des Halters relevant? Bei der Auswahl des Halters sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke der Platte entscheidend, um korrekte Sitz- und Paarungsbedingungen zu gewährleisten. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160408 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide reliability, a 0.8 mm corner radius and robust performance in interrupted cuts for dependable turning results; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. VNMG160408 T9235 — ISO turning insert, CVD-coated carbide, 35° entry angle — Tungaloy The VNMG160408 T9235 is a rhombic ISO turning insert designed for steel turning under unstable or interrupted conditions, offering a tough grade and double-sided chipbreaker for productive machining. CVD-coated carbide for tough conditions Double-sided chipbreaker for interrupted cuts 35° entering angle for versatile turning Stable chip control for interrupted and unstable cuts The combination of a CVD-coated carbide substrate and the T9235 grade provides a balance between toughness and wear resistance that favours stable chip formation when turning steel at moderate speeds. In practice, the coating reduces flank wear and improves edge retention under variable cutting forces, while the geometry and chipbreaker design maintain consistent evacuation. This results in fewer tool changes and more predictable process behaviour on components where interrupted cuts or unstable setups would otherwise cause rapid edge failure. Robust edge life and predictable surface finish A 35° entering angle paired with the 0.8 mm radius yields a robust cutting edge suited to roughing and semi-finishing operations; the configuration absorbs shock loads and supports reproducible tool life. The moderate corner radius reduces the risk of chipping in start‑stop cuts, while the insert form contributes to acceptable surface integrity without demanding excessive spindle power. For production runs with mixed stability, this combination increases uptime and reduces scrap rates through dependable mechanical behaviour. ISO compatibility and system integration for efficient replacement As an ISO-compliant rhombic insert with a cylindrical hole and double-sided chipbreaker, the component integrates easily into common external holders and boring bars, simplifying stocking and replacement logistics. The insert’s standardised dimensions and hole style mean interchangeability with existing toolholders is straightforward, enabling fast indexation or replacement when the edge reaches its limit. For workshop planning, the predictable geometry supports consistent fixturing and process parameters across comparable turning operations. For demanding steel turning applications choose Tungaloy’s proven grade T9235—contact Metav Werkzeuge for technical consultation and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785964 Manufacturer SKU: TUN6785964 Material: carbide Grade/coating: T9235, CVD-coated Series: ISO turning indexable inserts Facts Shape: rhombic Size: 16 mm Corner radius: 0.8 mm Entry angle: 35° Relief angle: 0° Special features Double-sided chipbreaker Cylindrical hole With hole Intended application: turning Suitable for interrupted cuts and unstable conditions FAQ What materials is this insert suited for? The VNMG160408 T9235 insert by Tungaloy is designed primarily for turning steel under lower cutting speeds and less stable conditions, where toughness and chip control are required. Is the insert reversible and indexable? Yes, the VNMG160408 T9235 is double-sided and indexable, allowing rotation to a fresh cutting edge to extend usable life. Which holder types are compatible with this geometry? Rhombic ISO holders and standard external turning toolholders that accept VNMG‑format inserts and a 16 mm size are compatible with the VNMG160408 T9235. Can this grade handle interrupted cuts? The T9235 grade with its robust core and chipbreaker is intended for interrupted cutting conditions and unstable setups, offering improved resistance to chipping. How does the 35° entering angle affect machining? A 35° entering angle provides a versatile balance between cutting force distribution and surface finish, making the insert suitable for both roughing and semi-finishing in appropriate steel applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160408 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of reliable chip control, robust CVD-coated carbide, and a geometry engineered for repeatable clamping; these features support stable turning under interrupted cuts and help to reduce tool changes. Order the VNMG160408 T9235 indexable turning insert directly via Metav Werkzeuge or consult our specialists for holder compatibility. VNMG160408 T9235 indexable turning insert for turning – Tungaloy A VNMG160408 T9235 indexable turning insert engineered for external and internal turning, offering a tough CVD-coated carbide grade for unstable conditions and interrupted cuts. CVD-coated carbide for enhanced toughness Designed for unstable and interrupted cuts Rhombic 16 mm plate, 0° clearance angle Double-sided chipbreaker with cylindrical hole Stable cutting performance in interrupted and unstable conditions The combination of a CVD-coated surface and a tough carbide substrate provides a balanced performance profile for turning operations in steel. The T9235 grade is formulated to maintain a durable cutting edge at lower cutting speeds and under interrupted engagement, which means fewer premature edge failures and more consistent productivity. For production environments where stability cannot always be guaranteed, this insert reduces the frequency of unplanned tool changes and helps to maintain component quality through stable chip formation. Geometry and clamping designed for repeatability and secure seating The rhombic plate form with an inscribed circle of 16 mm, a plate thickness of 4.76 mm and a corner radius of 0.8 mm provides a predictable contact area in standard ISO-type holders. The 0° clearance angle and the 35° wedge geometry contribute to a repeatable cutting angle when mounted in compatible external holders or boring bars. A cylindrical hole and double-sided chipbreaker enable secure clamping and economical indexability, delivering simple rotation to a fresh edge and ensuring consistent part-to-part accuracy over multiple regrinds or indexings. System compatibility and practical application advice This insert is intended for use in a standard ISO turning system comprising an indexable insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws. Compatibility with a given holder depends on geometry, clearance, tolerance class, fastening method, size and thickness; therefore, selecting the matching clamping set and chipbreaker is essential for optimal performance. The insert’s design supports both external and internal turning applications in steel; choosing the correct chipbreaker and machining parameters will further improve surface finish and extend tool life. For reliable results with Tungaloy’s T9235 grade—especially in interrupted turning—contact Metav Werkzeuge for a tailored recommendation and fast supply: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 6786002 Manufacturer SKU: TUN6786002 Metav SKU: 6786002-Tungaloy Material: Carbide Grade: T9235 Facts Inscribed circle (size): 16 mm Plate thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Wedge/lead angle: 35° Special features CVD-coated grade T9235 Double-sided chipbreaker Cylindrical hole for clamping Rhombic plate form Suitable for external and internal turning Intended for steel and unstable or interrupted cuts FAQ What materials is this insert suitable for? The VNMG160408 T9235 indexable turning insert is specified for use in steel applications and is especially suited to operations where toughness is required due to unstable conditions or interrupted cuts. How does the T9235 coating influence performance? The CVD-coated T9235 grade on the Tungaloy indexable insert provides enhanced wear resistance while the tough substrate reduces chipping, resulting in longer life at conservative cutting speeds. Which holders are compatible with this insert? Compatibility depends on holder form, clearance, tolerance class, fastening method, size and thickness; matching the VNMG160408 geometry to a suitable external holder or boring bar is required for secure mounting and repeatable results. Can the insert be indexed and reused? Yes, the double-sided chipbreaker and cylindrical hole enable economical indexing; the insert can be rotated to present a fresh edge, reducing tooling costs and downtime. What corner radius and plate thickness does this insert have? This indexable turning insert features a corner radius of 0.8 mm and a plate thickness of 4.76 mm, offering a balance between edge strength and detail in part profiles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com