VNMG 160408 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of dependable cutting performance in unstable conditions, CVD‑coated carbide durability and versatile geometry for consistent turning results — order the insert directly via Metav Werkzeuge or consult our application specialists for tailored advice. VNMG160408 T9235 – ISO turning indexable insert for external and internal turning, CVD‑coated carbide, 35° VNMG160408 T9235 is an ISO‑standard rhombic turning insert engineered for robust performance in steel turning where interrupted cuts and less stable setups demand a tough grade and reliable chip control CVD-coated carbide grade T9235 35° rhombic geometry for stability 0.8 mm corner radius for versatility Double-sided chipbreaker with cylindrical hole Robust cutting under unstable conditions for predictable throughput The CVD‑coated carbide grade T9235 is formulated to deliver stable chip formation and extended tool life in steel machining at reduced cutting speeds. This toughness-focused grade is especially suitable for operations with vibration or interrupted cuts where high heat resistance is less critical than edge robustness. The result is fewer tool changes and more reliable cycle times, which supports a smooth production flow and predictable component quality. Geometry and chip control that reduce rework and downtime A 35° rhombic geometry combined with a 0.8 mm corner radius provides a balance between strength and versatility for a range of turning tasks. The double-sided chipbreaker is designed to manage chips effectively during both light and heavier cuts, helping to avoid built-up edge and improve surface finish. The insert’s cylindrical hole ensures secure clamping in compatible holders, so insert seating and repeatability remain dependable across batch runs. System compatibility and practical selection guidance As an ISO turning insert, the part integrates into standard indexable systems; compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness. For steel turning, choose this grade and chipbreaker when machining under unstable conditions or when frequent interruptions occur. The combination of a robust grade and controlled geometry makes the insert a practical choice for workshops seeking low-risk tool performance and predictable maintenance intervals. Choose Tungaloy’s CVD‑coated grade T9235 for resilient steel turning — contact Metav Werkzeuge for availability and application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6785808 Manufacturer SKU: TUN6785808 SKU: 6785808-Tungaloy Model series: ISO‑Drehwendeschneidplatten ISO designation: 160408 Insert designation: VNMG160408 Grade: T9235 Material: Hartmetall Facts Angle: 35° Corner radius: 0.8 mm Insert size: 16 mm Relief angle: 0° Hole: cylindrical Special features CVD‑coated carbide grade T9235 Rhombic insert shape Double-sided chipbreaker Cylindrical hole for secure clamping ISO turning indexable insert For external and internal turning Compatibility determined by holder geometry and clamping FAQ What materials is this insert suitable for? The VNMG160408 T9235 insert (Tungaloy turning insert, SKU 6785808-Tungaloy) is optimised for machining steel, particularly where a tough, wear‑resistant grade is required at moderate cutting speeds. How does the chipbreaker affect performance? The double-sided chipbreaker supports controlled chip formation and evacuation, reducing the risk of built-up edge and improving surface finish during interrupted or unstable cuts. Which holder features are critical for compatibility? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; ensure the external holder or boring bar matches the insert’s ISO geometry and hole style. Is this insert suitable for internal turning as well as external turning? Yes, the geometry and mounting style are suitable for both external and internal turning when used in an appropriate holder and with matching cutting parameters. What is the advantage of the 0.8 mm corner radius? A 0.8 mm radius offers a compromise between edge strength and fine detail capability — it increases toughness at the corner while maintaining acceptable surface quality for a variety of turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160408 T9235 Wendeplatten - Tungaloy
VNMG160408-DM T9235 Drehwendeschneidplatte für Drehen von Stahl (Tungaloy) Die VNMG160408-DM T9235 Drehwendeschneidplatte bietet zähe CVD-Beschichtung für stabile Spanbildung bei instabilen Schnittbedingungen und eignet sich speziell für Außen- und Innendrehen Hohe Zähigkeit für instabile Schnitte CVD-beschichtetes Hartmetall für lange Standzeit Kompatibel mit ISO-Haltern und Bohrstangen Rhombische Form mit zylindrischem Loch Speziell abgestimmt auf Stahlbearbeitung Produktivität in instabilen Bearbeitungen sichern Die VNMG160408-DM T9235 Wendeschneidplatte verbindet Zähigkeit und konstante Schneidkanteneigenschaften, sodass bei stärker unterbrochenem Schnitt die Prozesssicherheit steigt. Die kombinierte Wirkung aus CVD-Beschichtung und Hartmetallträger reduziert Verschleiß und ermöglicht längere Standzeiten, was die Rüstintervalle verlängert und die Teilestückkosten senkt. Anwender profitieren von gleichbleibender Oberflächenqualität auch bei variierenden Stabilitätsbedingungen. Materialkunde und Beschichtungsnutzen einfach erklärt Bei der T9235 Sorte handelt es sich um ein CVD-beschichtetes Hartmetall, das speziell für Stahl entwickelt wurde. CVD steht für chemical vapor deposition und beschreibt ein Beschichtungsverfahren, das hohe Schichthaftung und Temperaturbeständigkeit liefert. Für Anwender bedeutet das: bessere Verschleißfestigkeit und zuverlässige Schneidkante bei moderaten Schnittgeschwindigkeiten, ohne dass die Zähigkeit der Schneidkante leidet. Kompatibilität, Aufbau und Auswahlkriterien Die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Die rhombische Plattenform mit zylindrischem Loch und einem Freiwinkel von 0° ermöglicht einfache Spannvarianten auf ISO-konformen Haltern oder Bohrstangen. Bei der Auswahl sind Spanbrecher (hier: DM) und Sorte nach Werkstoff, Bearbeitungsart und Maschinenstabilität zu wählen, um optimale Spanformung und Werkzeugleben zu erreichen. Zielgruppe und konkrete Einsatzempfehlung Die Platte richtet sich an Fertigungsbetriebe, Lohnfertiger und Produktionsplaner, die Stahlkomponenten mit unterbrochenen Schnitten oder schwankender Stabilität bearbeiten. Durch die zähe Sorte T9235 lassen sich Maschinen mit geringerer Steifigkeit wirtschaftlich nutzen, da die Platte Standzeit und Prozesssicherheit kombiniert. Bei Bedarf an höherer Schnittgeschwindigkeit sind alternative Sorten prüfenswert; für robuste, zuverlässige Bearbeitung bleibt diese Sorte erste Wahl. Empfehlung: Für produktive Stahlzerspanung die Tungaloy VNMG160408-DM T9235 einsetzen; bei Fragen zur Anwendung oder Halterkompatibilität gern Kontakt über info@metav-werkzeuge.com oder Telefon +49 2822 7131930 aufnehmen Produktmerkmale Artikelnummer: 6785965 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160408-DM Daten Eckenradius: 0.8 mm Winkel: 35° Plattengröße: 16 mm Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung/Sorte: T9235 (CVD-beschichtet) Schneidstofftyp: CVD-beschichtetes Hartmetall Spanbrecher: DM Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: rhombisch Anwendung: Drehen Modellserie: ISO-Drehwendeschneidplatten FAQ Welche Vorteile bietet die T9235-Beschichtung für Stahlbearbeitung? Die T9235 CVD-Beschichtung auf der VNMG160408-DM sorgt für hohe Verschleißfestigkeit und gute Schneidkantenstabilität, wodurch Standzeiten steigen und die Oberflächenqualität bei Stahlbauteilen konstanter bleibt. Ist die Platte für Innendrehen geeignet? Ja, die VNMG160408-DM T9235 ist für Außen- und Innendrehen vorgesehen; die rhombische Form und das zylindrische Loch erlauben universelle Spannlösungen auf ISO-Haltern. Welchen Spanbrecher sollte man wählen? Für instabile Bedingungen und unterbrochene Schnitte ist der integrierte Spanbrecher DM der VNMG160408-DM passend, da er stabile Spanformung und zuverlässige Abfuhr fördert. Wie beeinflusst die Zähigkeit der Sorte die Wahl der Schnittgeschwindigkeit? Die zähe Sorte T9235 ist auf niedrigere bis moderate Schnittgeschwindigkeiten ausgelegt; dadurch wird die Schneidkante bei starkem Schnittwechsel weniger beansprucht und die Standzeit verlängert. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160408 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9235 grade and the ZF chipbreaker for reliable metal removal under unstable cutting conditions; the insert’s 0.8 mm corner radius and 0° clearance ensure robust edge strength and consistent performance. Order directly via Metav Werkzeuge or contact the consultants for application-specific advice and availability. VNMG 160408 T9235 – VNMG indexable turning insert, CVD-coated carbide, 0.8 mm radius | Tungaloy A VNMG160408-ZF T9235 indexable insert for turning, designed for external and internal operations where interrupted cuts or unstable setups demand a tough CVD-coated carbide grade. CVD-coated carbide grade T9235 Optimised ZF chipbreaker for turning 0° clearance angle for robust engagement 0.8 mm corner radius for sturdy edges High stability and predictable metal removal for turning operations This indexable insert combines a CVD-coated wear layer with a tough carbide substrate to deliver stable performance when machining steel. The T9235 grade is formulated for lower cutting speeds and interrupted cuts, which reduces the risk of premature edge failure in unstable set-ups. The ZF chipbreaker promotes controlled chip formation, helping to prevent recutting and improving tool life. Compatibility follows ISO dimensions, so selection of the correct holder and clamping parts is essential for predictable results. Compatibility and system setup for simple integration Engineered as part of an ISO indexable turning insert system, the insert interfaces with standard external holders or boring bars; compatibility depends on form, clearance, tolerance class, fastening method, size and thickness. The rhombic plate form and the presence of a cylindrical hole allow secure clamping in many common inserts holders. For assembly, pair the insert with the matching shim, clamping set and replacement screws to maintain repeatable seating and to protect the insert seat from deformation. Practical advantages: edge resilience and process security The combination of a 0.8 mm corner radius and a 0° clearance produces a robust cutting edge that resists chipping during interrupted engagement. This geometry is particularly suitable when machining medium to heavy cross-sections or when stability is limited. The rhombic plate shape offers flexible approach angles for external profiling and light shoulder cuts, while the grade’s formulation prioritises stable chip formation and steady wear behaviour over ultra-high-speed removal. Choosing the right chipbreaker and grade for efficiency Selecting the correct chipbreaker and the T9235 grade means balancing cutting speed, feed and the workpiece material to achieve the best tool life and surface quality. For steel turning in less stable set-ups, this insert’s specifications favour conservative cutting parameters with high process reliability. When paired with suitable coolant strategies and a rigid tool-holding arrangement, it delivers consistent cycle times and reduces downtime for insert changes. Contact Metav Werkzeuge for tailored application advice, availability and recommended holders for the Tungaloy VNMG160408-ZF T9235 insert; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: 6786001 Manufacturer SKU: TUN6786001 SKU: 6786001-Tungaloy Name: VNMG160408-ZF T9235 Brand: Tungaloy Material: carbide Coating: CVD Grade: T9235 Facts Corner radius: 0.8 mm Clearance angle: 0° Insert angle: 35° Plate thickness: 4.76 mm Size: 16 mm Hole: with cylindrical hole Design / Special features ISO indexable turning insert series Rhombic plate form Chipbreaker: ZF Application: turning (external and internal) Suitable for interrupted cuts and unstable conditions System components: insert, holder, shim/clamping set, replacement screws FAQ What materials is this insert intended for? The VNMG160408-ZF T9235 insert is designed primarily for machining steel; the T9235 grade and CVD coating provide toughness for interrupted cuts and less stable conditions. How does the ZF chipbreaker affect performance? The ZF chipbreaker promotes short, controllable chips and reduces the risk of recutting, improving process security and extending the effective tool life of the insert. Which holders are compatible with this ISO insert? Compatibility is determined by the insert form, clearance, tolerance class, fastening method, size and thickness; use holders specified for VNMG 160408 ISO dimensions and the appropriate clamping set. Is the insert suitable for internal turning? Yes; the rhombic form and the 0.8 mm corner radius allow use in both external and internal turning, with attention to holder reach and rigidity for internal operations. What cutting conditions suit the T9235 grade best? The T9235 grade performs best at lower cutting speeds under interrupted cutting or unstable conditions where a tougher substrate and CVD wear layer reduce edge breakage. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160408 TH10 Wendeplatten - Tungaloy
The combination of a sharp TH10 uncoated carbide grade, 0.8 mm corner radius and ISO conformity provides precise, low‑force machining for non‑ferrous parts and light finishing. Order the VNMG160408-33 TH10 indexable turning insert directly via (Metav Werkzeuge) or ask our consultants if needed. VNMG160408-33 TH10 – ISO indexable turning insert by Tungaloy, 35° rhombic geometry VNMG160408-33 TH10 is an ISO‑normed indexable turning insert designed for external and internal turning where a clean surface and low cutting forces are required. Uncoated carbide TH10 for clean finishes Rhombic 35° geometry with cylindrical hole 0.8 mm corner radius for precise profiling ISO 160408 compatibility for standard holders Precise machining with a low‑force, uncoated carbide grade The insert employs the TH10 uncoated carbide grade, chosen for applications where a surgical edge and controlled cutting forces are priorities. This carbide grade supports a clean surface on non‑ferrous materials and reduces built‑up edge, which benefits finishing passes and delicate profiles. The uncoated cutting edge maintains low friction at moderate speeds, so the tool delivers consistent results when a low cutting force is desirable. The supplied geometry and grade together support reliable material removal without aggressive coating layers that could mask the cutting edge behaviour. ISO compatibility and secure clamping for repeatable results Built to the ISO 160408 form, the insert’s rhombic outline and cylindrical hole ensure compatibility with a wide range of standard turning holders. Compatibility is determined by the insert form, relief angle, tolerance class, mounting method, size and thickness; this insert meets those ISO parameters for straightforward integration into existing tool systems. The 35° lead angle favours versatile turning strategies, delivering a balance between cutting edge engagement and radial load distribution. Clear specification of form and key dimensions enables predictable setup and minimises downtime during tool changes. Optimised edge form and chip control for finishing and profiling The 0.8 mm corner radius is sized to support accurate profiling and stable finishing cuts without sacrificing edge strength. The integrated chipbreaker 33 has been designed to influence chip formation according to workpiece stability and cutting conditions; choosing the correct chipbreaker and grade reduces machining vibration and improves surface integrity. The insert’s 0° relief angle maintains consistent contact geometry for many turning tasks, while the uncoated edge simplifies regrinding or edge honing where required. Practical application advice and system considerations Intended for turning, this indexable insert is suitable for both external and internal operations on non‑ferrous materials and similar alloys where the TH10 grade performs well. Selection of the matching holder, appropriate clamping set and correct screw torque is critical for extracting full performance: the ISO form and the cylindrical hole support secure seating, but the holder’s clearance angles and tolerance class determine final stability. For semi‑finishing and finishing passes, pairing the insert’s geometry with stable workholding and reduced depth of cut will generate the best surface quality with minimal cutting forces. Contact Metav Werkzeuge to discuss the Tungaloy VNMG160408-33 TH10 insert for integration into existing turning setups or to request application recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6809476 Manufacturer SKU: TUN6809476 SKU: 6809476-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: VNMG160408-33 TH10 Facts ISO designation: 160408 Insert size: 16 mm Corner radius: 0.8 mm Lead angle: 35° Relief angle: 0° Chipbreaker: 33 Special features Material: carbide Grade: TH10 (uncoated) Shape: rhombic Hole: with cylindrical hole Application: turning (external and internal) Typical system: ISO indexable insert with matching holder and clamping set FAQ What materials is this insert best suited for? The VNMG160408-33 TH10 insert uses the TH10 uncoated carbide grade and is particularly suited to non‑ferrous materials and situations where a clean surface and low cutting forces are required. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius provides accurate profiling and improved edge strength during finishing passes, helping to produce consistent surface quality with the VNMG160408-33 TH10. Is this insert compatible with standard ISO turning holders? Yes; the insert follows the ISO 160408 form and is compatible with holders designed for that ISO specification, provided the holder matches in form, clearance and clamping method. What does the chipbreaker 33 influence in operation? Chipbreaker 33 shapes chip formation to suit stability and cutting mode, aiding chip control and reducing the risk of entanglement during finishing and medium‑depth cuts with this insert. Does the insert come coated? The VNMG160408-33 TH10 is an uncoated carbide insert, selected where a sharp, uncoated cutting edge is preferred for low cutting forces and clean surface finishes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 AH110 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated AH110 grade for wear resistance and a 1.2 mm nose radius for reliable surface finish in demanding turning operations; order the insert directly via Metav Werkzeuge or ask the consultants for application support. VNMG160412 AH110 ISO turning insert for turning, Tungaloy A VNMG160412 AH110 indexable turning insert engineered for external and internal turning, combining a sharp cutting edge with process security for stable production results. ISO‑compliant rhombic insert, 35° lead angle PVD‑coated carbide AH110 for edge stability Double-sided chipbreaker, with central hole Radius 1.2 mm for versatile turning Consistent edge life through PVD-coated AH110 grade The combination of a PVD‑coated surface and a hard carbide substrate provides measurable improvements in tool life and reproducibility. The AH110 grade is designed to resist both wear and chipping, which translates into fewer insert changes and reduced machine downtime. For production environments where repeatability matters, this results in a steadier cycle time and more predictable output quality. The coating also aids thermal stability at higher cutting speeds, supporting a consistent cutting geometry throughout a machining batch. Geometry tuned for stable external and internal turning The rhombic shape with a 35° lead angle and a 1.2 mm radius delivers a balance between edge strength and finish capability. The double-sided chipbreaker promotes controlled chip formation for a range of turning depths, improving surface integrity on both external and internal contours. Compatibility with holders depends on form, clearance angle, tolerance class, fixation and size, so selecting the correct external holder or boring bar ensures the geometry performs as intended and delivers the required surface quality. ISO system integration and handling benefits As part of an ISO series of indexable turning inserts, the item integrates into established tool systems consisting of an insert, suitable holder or boring bar, a shim/clamp set and replacement screws. The insert is supplied with a cylindrical centre hole, enabling secure clamping and simple indexability to use both cutting edges. Clear labelling and the manufacturer SKU support inventory control and rapid replenishment, helping workshops maintain high machine utilisation without complex logistics. Practical advantages for production workflows Using a grade optimised for wear resistance and a robust chipforming geometry reduces scrap rates and the need for frequent rework. The insert supports a variety of steel and alloy applications when paired with an appropriate chipbreaker and holder stability, making it suitable for mixed-production shops and jobbing environments. In addition, the standardised form factor simplifies training for operators and streamlines the setup procedures at the machine. For production-proven cutting performance and support with tool selection, contact Metav Werkzeuge for application advice or to source the Tungaloy VNMG160412 AH110 insert; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6837251 SKU: 6837251-Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Size: 16 Nose radius: 1.2 mm Lead angle: 35° Clearance angle: 0° Special features Material: carbide (PVD‑coated) Grade/sort: AH110 Hole: with cylindrical hole Plate shape: rhombic FAQ What materials is this insert suitable for? The VNMG160412 AH110 insert is a PVD‑coated carbide grade designed for a wide range of steels and common alloyed materials when used with the correct chipbreaker and cutting parameters. How does the double-sided chipbreaker influence machining? A double-sided chipbreaker provides controlled chip formation on both cutting edges, improving surface finish and reducing the risk of built-up edge during turning operations with the VNMG160412 AH110. Is this insert compatible with standard ISO holders? Yes; the insert is part of an ISO series and is compatible with holders and boring bars that match the form, fixation, tolerance class, size and thickness of the VNMG160412 profile. What is the advantage of the 1.2 mm nose radius? The 1.2 mm radius offers a compromise between edge strength and surface finish, allowing stable cutting forces and good workpiece appearance in general turning tasks. Can the insert be indexed to use both cutting edges? Yes; the rhombic, double-sided design and central cylindrical hole permit indexing to utilise both cutting edges for economical use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade AH6225 insert engineered for reliable stainless-steel turning, with a 1.2 mm corner radius and ISO VNMG160412 form for straightforward tool integration; order directly via Metav Werkzeuge or contact the consultants for machining advice. VNMG160412 AH6225 indexable turning insert — PVD-coated carbide for stainless steel (Tungaloy) The VNMG160412 AH6225 is a PVD-coated carbide, ISO‑standard indexable insert designed for precision external and internal turning, offering a sharp yet stable cutting edge suitable for medium machining and changing conditions. PVD-coated carbide grade AH6225 Designed for stainless steels ISO VNMG160412 rhombic form Double-sided chipbreaker for versatility Consistent surface quality and predictable tool life The AH6225 grade combines a PVD-coated surface with a carbide substrate to deliver a sharp cutting edge that resists wear under variable conditions. For shops focused on reproducible results, this configuration reduces process variation by maintaining edge geometry during medium-duty cuts. The coating improves thermal and abrasive resistance, which contributes to steadier surface finishes on stainless steels and lowers the frequency of unscheduled insert changes. As a result, cycle time stability improves and setup downtime is minimised. Fast integration into ISO holders and secure clamping Designed to the ISO VNMG160412 outline, this ISO VNMG160412 rhombic insert fits common turning holders when form, clearance, tolerance class, attachment and size match. The insert features a rhombic profile with a cylindrical hole for positive location and secure fastening, a nominal corner radius 1.2 mm and a 0° clearance specification. The listed 35° lead angle supports efficient cutting geometry for external and internal passes, enabling compatibility with standard tool systems and simplifying toolroom logistics when replacing worn edges. Productivity through versatile chip control and economical use A double-sided chipbreaker extends usable edges and enhances chip formation across a range of feeds and depths, reducing the need for constant parameter changes. The carbide base gives robust mechanical support for the cutting edge, while the PVD finish adds tribological benefits that lower build‑up and edge degradation. For production environments the combination of ISO turning inserts and this grade supports predictable interchangeability, enabling cost-conscious operations to plan insert usage and inventory with confidence. For stainless-steel turning applications, consider the Tungaloy VNMG160412 AH6225 insert for consistent medium‑duty performance and contact Metav Werkzeuge for technical consultation or order support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947462 Manufacturer SKU: TUN6947462 SKU: 6947462-Tungaloy Model series: ISO turning inserts Facts Corner radius: 1.2 mm Lead angle: 35° Clearance angle: 0° Insert size: 16 Special features Grade/coating: AH6225, PVD-coated carbide Applicable material: stainless steels Chipbreaker: double-sided Plate form: rhombic Hole: with cylindrical hole Application: Turning System: ISO turning insert, compatible holders determined by form, clearance, tolerance, attachment, size, thickness FAQ What materials is this insert suitable for? The VNMG160412 AH6225 Tungaloy insert is optimised for machining stainless steels, offering a balance of edge sharpness and stability for medium machining tasks. Is the insert indexable and reversible? Yes, the double‑sided chipbreaker makes the VNMG160412 AH6225 a reversible insert that extends usable cutting positions and supports efficient indexation. What are the corner radius and geometric angles? The insert has a corner radius of 1.2 mm, a lead angle of 35° and a clearance angle of 0°, allowing predictable cutting geometry for many turning operations. How does the AH6225 grade perform under mixed conditions? AH6225 is a PVD‑coated carbide designed for a sharp yet stable cutting edge; it provides good wear resistance and consistent performance across varying cutting conditions encountered in stainless‑steel turning. Which holders are compatible with this insert? Compatibility depends on the ISO VNMG160412 form, holder pocket geometry, tolerance class, attachment method and thickness; matching those parameters ensures proper clamping and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated carbide grade AH6225, a 1.2 mm corner radius and ISO conformity for reliable stainless‑steel turning; this insert delivers stable cutting and predictable tool life in medium turning operations. Order the VNMG160412 AH6225 insert directly via Metav Werkzeuge or consult our specialists for application guidance. VNMG160412 AH6225 — ISO turning insert by Tungaloy (35°, R1.2) A VNMG160412 AH6225 ISO turning insert designed for external and internal turning, providing a sharp yet stable cutting edge for stainless steels PVD-coated carbide for enhanced wear resistance Universal grade optimised for stainless steels Rhombic form with 35° cutting angle Corner radius 1.2 mm and central cylindrical hole Consistent cutting performance for stainless steels The PVD‑coated AH6225 carbide provides a well balanced combination of a sharp cutting edge and edge stability tailored to medium turning conditions. This results in predictable tool life and consistent surface finish when machining stainless steels, even under changing cutting conditions. The coated grade helps reduce flank wear and increases process reliability, which in turn improves throughput and reduces scrap in routine production runs. Geometry that reduces setup time and improves repeatability The rhombic form and 35° cutting angle of this insert make it suitable for a broad range of external and internal turning tasks while the central cylindrical hole ensures secure locating and clamping in ISO tool holders. With a plate thickness of 4.76 mm and an insert size of 16 mm, the geometry is compatible with standard ISO holders; this compatibility simplifies tool changeover, reduces setup time and supports repeatable machining results across batches. Application scope and chip control explained Designed as a double‑sided insert with an integrated chipbreaker, this grade is aimed primarily at turning stainless steels under moderate cutting conditions. The chipbreaker geometry supports controlled chip formation, improving evacuation and minimising the risk of built‑up edge. For novice users: PVD coating is a thin, hard layer applied to the carbide that increases thermal and abrasive resistance without significantly altering the substrate toughness, making the insert suitable for demanding intermittent cuts. Operational advantages and economic impact Choosing a universal grade like AH6225 reduces the number of tool changes required across mixed stainless‑steel workpieces, which lowers tooling consumption and downtime. The 1.2 mm corner radius provides a balance between edge strength and profile fidelity, allowing for stable feeds and acceptable surface quality. In production terms, this translates to fewer interventions, more predictable insert life and an overall improvement in manufacturing productivity. Contact Metav Werkzeuge for tailored cutting‑tool advice and to arrange supply of the Tungaloy VNMG160412 AH6225 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6827606-Tungaloy Manufacturer SKU: TUN6827606 Manufacturer article number: 6827606 Model series: ISO turning inserts Designation: VNMG160412 AH6225 Brand: Tungaloy Core data Corner radius: 1.2 mm Cutting angle: 35° Plate thickness: 4.76 mm Insert size: 16 mm Clearance angle: 0° Hole: central, cylindrical Chipbreaker: double-sided Special features Material: carbide Coating / grade: AH6225 (PVD-coated) Form: rhombic Application: turning (external and internal) Compatibility: ISO‑normed insert geometry for standard holders Function: sharp yet stable cutting edge for medium machining conditions FAQ What materials is this insert intended for? The VNMG160412 AH6225 insert from Tungaloy is optimised for machining stainless steels, offering good edge stability and controlled chip formation during medium turning operations. Can the insert be used for both external and internal turning? Yes, the ISO geometry and rhombic form of this Tungaloy turning insert allow use in both external and internal turning applications when paired with a compatible ISO holder. How does the AH6225 grade improve tool life? The PVD‑coated AH6225 grade on this VNMG insert increases wear resistance and thermal stability, which helps maintain a sharper edge for longer and reduces flank wear under varying cutting conditions. What does the 1.2 mm corner radius mean for surface finish? A 1.2 mm corner radius on the VNMG160412 offers a compromise between edge strength and profile fidelity, enabling stable feeds and a consistent surface finish in medium cutting operations. Is the insert reversible and how is it clamped? The insert is double‑sided and features a central cylindrical hole for secure clamping in ISO holders; this supports economical use by allowing rotation to a fresh cutting edge. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 AH6225 Wendeplatten - Tungaloy
VNMG160412 AH6225 Tungaloy-Wendeplatte — Drehwendeschneidplatte für Drehen von rostfreien Stählen Die VNMG160412 AH6225 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte, ausgelegt für Außen- und Innendrehen bei mittleren Bearbeitungsbedingungen. Universelle Sorte für rostfreie Stähle PVD-beschichtetes Hartmetall für bessere Standzeit Rhombische Form, 35° Anstellwinkel Eckenradius 1,2 mm für stabile Schneidkante Mit zylindrischem Loch, doppelseitig verwendbar Hohe Prozesssicherheit bei rostfreien Stählen Die Kombination aus PVD-beschichtetem Hartmetall und der Sorte AH6225 sorgt für eine scharfe, zugleich belastbare Schneidkante, die besonders bei rostfreien Stählen den Aufbau von Grat und Anbackungen reduziert. Anwender profitieren von konstanter Bearbeitungsqualität und verlängerten Werkzeugstandzeiten, weil die Beschichtung Verschleiß minimiert und die Oberflächengüte stabilisiert. Präzise Geometrie für sichere Montage und Wiederholgenauigkeit Die rhombische Plattenform mit 35° Anstellwinkel und einem Eckenradius von 1,2 mm bietet eine ausgewogene Lastverteilung an der Schneide. Das ISO-genormte Format und das zylindrische Loch gewährleisten die Kompatibilität zu passenden Haltern; die Montage hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Der Freiwinkel von 0° beschreibt die geometrische Freistellung der Schneide gegenüber dem Werkstück. Wirtschaftlichkeit durch doppelseitige Nutzung und einfache Systemintegration Die Wendeschneidplatte ist doppelseitig ausgeführt, wodurch sich Standzeit und Wirtschaftlichkeit verbessern, da die Platte gewendet werden kann. Das System besteht aus der Drehplatte, einem passenden Außenhalter oder einer Bohrstange sowie Unterlage/Klemmsatz und Ersatzschrauben. Dadurch entstehen kurze Rüstzeiten und planbare Prozessabläufe in der Fertigung. Zielgruppe und typische Einsatzfälle Die Plattengeometrie und die Sorte AH6225 richten sich an Lohnfertiger und Fertigungsbetriebe, die rostfreie Stähle bearbeiten und Wert auf konstante Ergebnisse bei wechselnden Schnittbedingungen legen. Typische Einsatzfelder sind Außen- und Innendrehen in mittleren Schnittbereichen, bei denen Oberflächengüte und Prozesssicherheit gefragt sind. Empfehlung: Für zuverlässige und produktive Zerspanung von rostfreien Stählen die VNMG160412 AH6225 Tungaloy-Wendeplatte verwenden und bei Metav Werkzeuge individuelle Anwendungsempfehlungen per eMail an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfragen Produktmerkmale Artikelnummer: 6947437 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160412 Daten Eckenradius: 1,2 mm Anstellwinkel: 35° Plattengröße: 16 Freiwinkel: 0° Besonderheiten Material: Hartmetall Schneidstofftyp: PVD-beschichtetes Hartmetall (AH6225) – PVD-Beschichtung für höhere Verschleißfestigkeit Sorte: AH6225 – universell für rostfreie Stähle Plattenform: rhombisch Loch: mit Loch, zylindrisches Loch Spanbrecher: doppelseitig Anwendung: Drehen Modellserie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6947437 FAQ Für welche Werkstoffe ist diese Wendeschneidplatte geeignet? Die VNMG160412 AH6225 Tungaloy-Wendeplatte ist speziell für die Bearbeitung von rostfreien Stählen konzipiert; die Sorte AH6225 mit PVD-Beschichtung bietet eine breite Werkstoffabdeckung bei mittleren Schnittbedingungen. Welche Geometrischen Kennwerte sind wichtig für die Auswahl des Halters? Wichtige Kennwerte sind die rhombische Plattenform, der Anstellwinkel von 35°, der Eckenradius 1,2 mm und der Freiwinkel 0°; die Kompatibilität hängt zusätzlich von Toleranzklasse, Befestigungsart, Größe und Dicke ab. Ist die Platte indexierbar oder nur einseitig nutzbar? Die Wendeschneidplatte ist doppelseitig ausgeführt, wodurch eine Wendung möglich ist und sich die effektive Standzeit erhöht. Wie erfolgt die Systemintegration in der Werkzeugaufnahme? Die VNMG160412 AH6225 Tungaloy-Wendeplatte wird zusammen mit einem passenden Außenhalter oder einer Bohrstange, Unterlage/Klemmsatz und den entsprechenden Ersatzschrauben eingesetzt; die ISO-Genormung erleichtert die Auswahl kompatibler Halter. Für welche Bearbeitungsarten ist die Sorte AH6225 ausgelegt? Die Sorte AH6225 ist ausgelegt für mittlere Bearbeitung und wechselnde Bedingungen, mit Fokus auf stabile Schneidkante und gute Spanbildung bei rostfreien Stählen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160412 AH6225 Wendeplatten - Tungaloy
Consistent machining quality is achieved by the combination of the AH6225 grade, a PVD‑coated carbide substrate and a stable 1.2 mm corner radius, delivering reliable edge life and repeatable finishes; order the VNMG160412 AH6225 insert directly via Metav Werkzeuge or ask our consultants if needed. VNMG160412 AH6225 Tungaloy turning insert — PVD‑coated carbide, 35° lead angle The VNMG160412 AH6225 is an ISO‑standard, rhombic indexable insert designed for external and internal turning of stainless steels, featuring a double‑sided chipbreaker and a cylindrical hole for secure clamping ISO rhombic form VNMG insert PVD‑coated carbide grade AH6225 Double‑sided chipbreaker for indexing 35° lead angle for stable cutting High‑performance grade for stainless steel turning The combination of a PVD‑coated surface layer and a cemented carbide substrate in the AH6225 grade provides a balanced mix of wear resistance and edge sharpness, suited for the demands of turning stainless steel. The coated surface improves heat resistance and reduces built‑up edge tendencies, while the substrate maintains edge stability under moderate cutting conditions. Specified with a 1.2 mm radius, the geometry supports consistent chip formation and prolongs life when intermittent cuts or variable feeds occur, resulting in fewer tool changes and more predictable production cycles. Indexable design that eases mounting and reduces downtime This insert is produced to ISO dimensions and a rhombic shape, so compatibility is governed by the holder form, clearance angle, tolerance class, fixing method, size and thickness. The cylindrical hole with a 0° relief angle ensures reliable seating and repeatable clamping torque when used with matching external holders or boring bars, while the double‑sided chipbreaker allows two usable edges per index. Because the system comprises the insert, a suitable holder, a clamp set and replacement screws, set‑up time is minimised and maintenance routines are straightforward, supporting efficient workflow on the shop floor. Process security and economic benefits in daily production Selecting the correct chipbreaker and the universal AH6225 grade delivers better process security and a consistent surface finish when turning a variety of stainless alloys. The insert’s 35° lead angle softens cutting forces, improving stability on slender part geometries and during internal turning. For manufacturers seeking productivity gains, the indexable format and robust PVD coating reduce frequency of tool changes and scrap, while the predictable wear behaviour contributes to reproducible component tolerances and reduced rework. These attributes suit production shops and jobbers who require reliability and repeatable performance from their tooling. For technical advice or to request a supply, contact Metav Werkzeuge — Metav Werkzeuge can advise on holder compatibility and process parameters; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6947447 SKU: 6947447-Tungaloy Manufacturer SKU: TUN6947447 Model series: ISO turning inserts Article name: VNMG160412 AH6225 Tungaloy insert Facts Shape: rhombic (VNMG) Size: 16 mm Corner radius: 1.2 mm Lead angle: 35° Relief angle: 0° Hole style: cylindrical hole Double‑sided chipbreaker Material: cemented carbide Coating: PVD Special features Grade AH6225 — universal for stainless steels PVD‑coated carbide for improved heat and wear resistance Indexable, double‑sided for economy of use Compatible with ISO‑standard external holders and boring bars Intended for external and internal turning System components: insert, holder, clamp set and replacement screws FAQ What materials is this insert intended for? This insert is specified for turning stainless steel and the AH6225 grade is optimised to provide a sharp, yet stable, cutting edge under variable conditions. How does the double‑sided chipbreaker affect runtime? The double‑sided chipbreaker allows indexing to a fresh edge, effectively doubling the number of usable cutting edges and reducing tooling costs per component when using the VNMG160412 AH6225 insert. Which holder features ensure compatibility with this VNMG insert? Compatibility is determined by holder form, clearance angle, tolerance class, fixing method, size and thickness; use a matching ISO VNMG holder with appropriate clamp set and screws for secure mounting. What advantages does the PVD coating bring to everyday machining? The PVD‑coating improves wear resistance and thermal stability, reduces built‑up edge on sticky alloys and supports consistent surface quality across production batches. Is the insert suited to internal boring as well as external turning? Yes, the insert’s geometry and 35° lead angle make it suitable for both external and internal turning operations when used with appropriate holders. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
VNMG 160412 AH6225 Wendeplatten - Tungaloy
VNMG 160412 AH6225 Tungaloy Wendeplatte zum Drehen VNMG 160412 AH6225 ist eine ISO-genormte rhombische Wendeplatte für Außen- und Innendrehen, entwickelt für den Einsatz an rostfreien Stählen und mittlere Bearbeitungsbedingungen Universelle Sorte für rostfreie Stähle PVD-beschichtetes Hartmetall für hohe Standzeit Rhombische Form mit 35° für vielseitige Anwendungen Doppelgenutzte Platte reduziert Betriebsaufwand Zylindrisches Loch für einfache Befestigung Wirtschaftliche Schneidleistung für rostfreie Stähle Die AH6225-Sorte kombiniert eine scharfe und gleichzeitig stabile Schneidkante, was besonders beim Drehen von rostfreien Stählen vorteilhaft ist. Durch die PVD-Beschichtung wird die Werkzeugstandzeit erhöht und die Wärmebeständigkeit verbessert; das führt zu weniger Werkzeugwechseln und damit zu einer messbaren Produktivitätssteigerung. Für Betriebe mit wechselnden Bedingungen bietet die Sorte gute Prozesssicherheit bei mittleren Schnittparametern Präzision durch Geometrie und Eckenradius Die rhombische VNMG-Geometrie mit einem Winkel von 35° und einem Eckenradius von 1,2 mm ermöglicht eine ausgewogene Kombination aus Zerspanleistung und Oberflächengüte. Der definierte Eckenradius reduziert die Schnittkräfte und stabilisiert die Schnittkante, was zu gleichmäßigeren Ergebnissen bei Außen- und Innendrehungen führt. Anwender profitieren von konstanter Maßhaltigkeit und reproduzierbarer Oberflächenbeschaffenheit Systemkompatibilität und Montagekomfort Als ISO-Drehwendeschneidplatte ist die Kompatibilität zum Halter durch Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke bestimmt. Die Platte ist doppelseitig nutzbar und verfügt über ein zylindrisches Loch, was die Montage vereinfacht und Rüstzeiten reduziert. In Kombination mit passenden Außenhaltern oder Bohrstangen lässt sich ein wirtschaftlicher, modularer Werkzeugaufbau realisieren Material und Beschichtung erklärt Die Trägerwerkstoffe bestehen aus Hartmetall, die Beschichtung ist PVD-basiert. PVD steht für Physical Vapour Deposition und bildet eine dünne, verschleißfeste Schicht, die Schnittkräfte senkt und Hitzeeinträge dämpft. Für Anwender ohne tiefes Fachwissen bedeutet das: längere Standzeiten, bessere Kantenerhaltung und weniger Nacharbeit bei rostfreien Stählen Empfohlene Anwendungen und Zielgruppe Die Platte ist primär für das Drehen ausgelegt, sowohl für Außen- als auch Innendrehoperationen. Zielgruppen sind Lohnfertiger, Serienfertiger und Werkstätten, die rostfreie Stähle und ähnliche Materialien bearbeiten. Dank universeller Sorteneigenschaften eignet sich das Produkt für wechselnde Aufgaben und unterschiedliche Spann- und Maschinenbedingungen Standzeit, Spanformung und Prozesssicherheit Die Kombination aus Geometrie, Eckenradius und PVD-Beschichtung sorgt für stabile Spanbildung und konstante Schneidkantenleistung. Die AH6225-Sortencharakteristik begünstigt kontrollierte Späne, reduziert Aufbauschneiden und erhöht die Prozesssicherheit bei mittleren Schnitttiefen. Ergebnis sind reproduzierbare Fertigungsläufe und geringerer Werkzeugverbrauch Empfehlung: Für zuverlässige und wirtschaftliche Zerspanung von rostfreien Stählen die AH6225-Sorte von Tungaloy wählen; technische Beratung und direkte Bestellung über Metav Werkzeuge: info@metav-werkzeuge.com, Tel +49 2822 7131930 Produktmerkmale Artikelnummer: 6966287 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6966287 Daten Plattengröße: 16 mm Plattendicke: 4,76 mm Eckenradius: 1,2 mm Winkel: 35° Freiwinkel: 0° Besonderheiten Material: Hartmetall Beschichtung: PVD Sorte: AH6225 — universal für rostfreie Stähle Plattenform: rhombisch Loch: zylindrisches Loch Ausführung: doppelseitig nutzbar Einsatz: Drehen Spanbrecher: doppelseitig FAQ Was unterscheidet die AH6225-Sorte bei der Bearbeitung rostfreier Stähle? Die AH6225-Sorte bietet eine scharfe, zugleich stabile Schneidkante und eine PVD-Beschichtung, die Wärmebeständigkeit und Standzeit verbessert. Bei der VNMG160412 Wendeplatte von Tungaloy führt das zu zuverlässiger Spanbildung und reduzierten Werkzeugwechseln Für welche Bearbeitungsarten ist diese Wendeplatte geeignet? Die Platte ist für Außen- und Innendrehen vorgesehen. Die rhombische Form mit 35° unterstützt vielfältige Bearbeitungsszenarien und erlaubt den Einsatz in unterschiedlichen Haltersystemen Wie beeinflusst der Eckenradius die Oberflächengüte? Der Eckenradius von 1,2 mm reduziert Schnittkräfte und stabilisiert die Schneidkante, was zu gleichmäßigeren Oberflächen und besseren Maßhaltigkeiten bei Drehoperationen führt Welche Vorteile bietet die zweiseitige Nutzung der Platte? Doppelseitige Nutzung verdoppelt effektiv die Nutzungsdauer pro Platte und senkt die Betriebskosten, da weniger Platten pro Produktionsmenge benötigt werden Ist diese Wendeplatte mit gängigen ISO-Haltern kompatibel? Ja, die VNMG160412 ist ISO-genormt; Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke des Halters ab. Passende Außenhalter und Unterlagen sind zu wählen Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160412 AH6225 Wendeplatten - Tungaloy
Taking advantage of the combination of PVD-coated carbide, a stable cutting edge and ISO compatibility ensures reliable machining of stainless steels with consistent surface quality and extended tool life; order the VNMG160412 AH6225 insert directly via Metav Werkzeuge or ask our consultants for application advice. VNMG160412 AH6225 ISO turning insert — PVD-coated carbide, 35° lead angle — Tungaloy A VNMG160412 AH6225 indexable insert for ISO-compliant external and internal turning, optimised for medium‑cutting operations in stainless steels with a stable, sharp cutting edge. PVD-coated carbide grade AH6225 Suited to stainless steels machining Rhombic 16 size with 35° lead angle Double-sided chipbreaker for stability Compatible with ISO VNMG holders Consistent edge life through PVD coating and carbide substrate The combination of a PVD-coated surface and a cemented carbide substrate provides balanced wear resistance and edge retention under varying conditions. The PVD layer reduces flank wear and extends cutting performance during medium‑duty turning, while the carbide core maintains toughness against intermittent loads. This pairing results in fewer insert changes and lower tooling-related downtime, contributing directly to improved process efficiency and predictable production cycles. Improved control of chips and surface finish with designed geometry A rhombic plate with a 35° lead angle and a 1.2 mm corner radius offers a compromise between cutting stability and surface quality. The double-sided chipbreaker is engineered to manage swarf formation and reduce built‑up edge when machining stainless steels, leading to more consistent part finishes and reduced secondary operations. Selection of the correct chipbreaker and grade helps avoid common issues such as material adhesion and chatter during both external and internal turning. System compatibility and practical assembly guidance As an ISO‑standard insert, compatibility with the toolholder is determined by form, clearance, tolerance class, fastening method, size and thickness. The insert is designed to sit in a matched holder together with an appropriate shim or clamp set and standard replacement screws; this modular approach simplifies inventory and replacement. The 0° clearance angle and a 4.76 mm plate thickness ensure secure clamping and repeatable seating, which supports reproducible machining results across batches. Application focus and selection advice for production environments This grade is formulated as a universal solution for stainless steels, offering a sharp yet stable cutting edge suited to varying conditions and medium feeds. For best results, pair the insert with a suitably rigid holder and select cutting parameters that account for stainless steel’s tendency to work‑harden. Choosing the right combination of feed, speed and coolant will maximise tool life and surface integrity while maintaining productivity in serial or jobbing work. Contact Metav Werkzeuge today for personalised grade and chipbreaker recommendations for Tungaloy inserts and ensure the correct setup for your turning tasks — Metav Werkzeuge can advise on holder compatibility and cutting data. Technical data Article number: 6890652 Manufacturer SKU: TUN6890652 Brand: Tungaloy Model series: ISO turning inserts Designation: VNMG160412 AH6225 SKU: 6890652-Tungaloy Facts Corner radius: 1.2 mm Plate size: 16 mm Plate thickness: 4.76 mm Lead angle: 35° Clearance angle: 0° Special features PVD-coated cemented carbide grade AH6225 Double-sided chipbreaker Rhombic plate form Cylindrical hole (with hole) ISO-standardised turning insert Designed for external and internal turning Suitable for machining stainless steels Compatibility requires matching holder, shim/clamp set and screws FAQ What materials is this insert intended for? The VNMG160412 AH6225 insert is formulated primarily for stainless steels, providing a sharp yet stable cutting edge suitable for medium turning operations. How does the PVD coating benefit machining performance? The PVD coating on the AH6225 grade improves wear resistance and edge life, reducing flank wear and helping to maintain consistent surface quality during production runs. Which geometric details influence holder compatibility? Holder compatibility depends on the insert form, lead and clearance angles, tolerance class, fastening type, plate size (16 mm) and thickness (4.76 mm); all must match the corresponding VNMG holder specifications. Is the chipbreaker reversible or single‑use? The insert features a double-sided chipbreaker, allowing both cutting edges to be used before replacement, which improves cost efficiency in production. What system components are required to mount the insert? Proper assembly requires a compatible external holder or boring bar, an underlay/shim or clamp set and replacement screws to ensure secure, repeatable clamping of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 AH6225 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH6225 grade and the proven rhombic VNMG geometry for stable, efficient machining of stainless steel; the 1.2 mm corner radius and 35° entry angle deliver predictable surface quality and tool life. Order the VNMG160412 AH6225 insert directly via Metav Werkzeuge or consult our technical team for application advice. VNMG 160412 AH6225 turning insert by Tungaloy — rhombic ISO insert for stainless steel turning VNMG160412 AH6225 is an ISO-format rhombic turning insert designed for external and internal turning in stainless steel; the geometry and grade are optimised for a sharp yet stable cutting edge under variable, medium-duty conditions. PVD-coated carbide grade AH6225 Optimised for stainless steel machining Rhombic VNMG form with 35° entry angle Double-sided insert with cylindrical central hole Consistent cutting performance for stainless steel The PVD-coated AH6225 grade offers a balanced combination of wear resistance and edge stability that favours medium-duty turning operations in stainless steel. The PVD layer reduces adhesive wear and provides a uniform surface that supports repeatable cutting behaviour; this means fewer unexpected interruptions and more predictable tool change intervals. As an ISO-format cutting insert, it is produced to defined tolerances so that insert seating and repeatability in the toolholder are reliable, contributing directly to stable production runs and consistent part quality. Geometry tuned for predictable chip control and surface finish A 35° cutting lead angle combined with the rhombic VNMG form and a 1.2 mm corner radius produces a compromise between a sharp cutting edge and mechanical robustness. The geometry helps to control the engagement and direction of the chip, supporting smoother chip flow and reducing vibration in many turning scenarios. For machinists and production engineers, this translates into improved surface finish and reduced need for downstream rework, particularly when machining components with changing profiles or interrupted cuts. Stable edge and economical productivity The insert’s design emphasises a sharp edge that remains resilient across variable conditions. The PVD-coated carbide substrate sustains cutting-edge integrity under thermal and mechanical loads typical of stainless steel turning. Economically, the combination of edge life and consistent cutting behaviour lowers the total cost per part: fewer insert changes, reduced cycle-time variability and better utilisation of machine capacity. Where process reliability is crucial, the grade’s balance of sharpness and robustness supports productive, repeatable machining. System compatibility and straightforward integration Being ISO-standardised, the insert fits into established toolholder systems when matched by form, clearance, tolerance class, fastening method, size and thickness. The insert is double-sided and supplied with a cylindrical central hole, facilitating secure clamping and easy indexing. Key dimensions such as the 16 mm inscribed circle, 4.76 mm thickness and the specified clearance angle mean straightforward selection of compatible holders and clamping kits. When integrated correctly, the cutting system yields improved stability and predictable performance across batches. For reliable stainless steel turning with a proven PVD-coated grade, contact Metav Werkzeuge for ordering and technical guidance on holder selection and cutting parameters — Metav Werkzeuge is available to assist with application-specific recommendations. Technical data Article number: 6947503 Manufacturer SKU: TUN6947503 Our SKU: 6947503-Tungaloy Manufacturer: Tungaloy Designation: VNMG160412 AH6225 Tungaloy insert Facts Inscribed circle / size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Cutting/lead angle: 35° Clearance angle: 0° Hole style: cylindrical hole Double-sided: yes Material: carbide Coating / grade: AH6225 (PVD) Application: Turning Special features Rhombic VNMG plate ISO-standard turning insert Sharp yet stable cutting edge for medium machining Compatibility determined by form, clearance, tolerance, fastening, size and thickness Suitable for external and internal turning; matching breaker and grade to workpiece and stability FAQ What materials is this insert best suited for? The VNMG160412 AH6225 insert is formulated primarily for stainless steel; the PVD-coated grade AH6225 provides wear resistance and edge stability suitable for stainless steel turning. Is the insert compatible with standard toolholders? Yes — the plate is ISO-standard rhombic (VNMG) and will fit holders that match the form, tolerance class, fastening style, size and thickness specified for VNMG160412 inserts. What are the key dimensions to check when selecting a holder? Important dimensions include the 16 mm inscribed circle, 4.76 mm plate thickness, 1.2 mm corner radius and the 35° entry angle; the insert’s cylindrical hole supports secure clamping. How does the AH6225 grade affect tool life? The AH6225 PVD-coated carbide grade balances a sharp cutting edge with enhanced wear resistance, improving tool life under medium-duty, variable turning conditions and reducing unexpected tool changes. Is the insert indexable and double-sided? Yes — the design is double-sided with a cylindrical central hole, allowing indexing to a fresh cutting edge and stable clamping in suitable holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 AH6235 Wendeplatten - Tungaloy
VNMG 160412 AH6235 Wendeplatte zum Drehen — Tungaloy Die VNMG 160412 AH6235 ist eine ISO-genormte Drehwendeschneidplatte für das Außen- und Innendrehen, speziell ausgelegt für Anwendungen an rostfreiem Stahl und für unterbrochene Schnitte. PVD-beschichtetes Hartmetall Speziell für rostfreien Stahl geeignet Rhombische Form 16 mm für Standardhalter Mit zylindrischem Loch für sichere Befestigung Doppelseitiger Spanbrecher für Prozesssicherheit Höhere Standzeit durch ausgewählte Beschichtung und Hartmetall Die Kombination aus PVD-Beschichtung und hochwertigem Hartmetall sorgt für eine deutlich verbesserte Verschleißfestigkeit und eine stabile Schneidkante. Das reduziert Stillstandzeiten und erhöht die Standzeit bei der Bearbeitung von rostfreiem Stahl, weil die Schicht die Kantenstabilität verbessert und Temperaturwechsel besser abfängt. Für Fertigungen mit hoher Ausbruchgefahr bietet diese Platte verlässlichere Ergebnisse als unbehandelte Alternativen. Präzision und Sicherheit im Haltersystem Die rhombische Plattenform in 16 mm Größe und das zylindrische Loch ermöglichen eine sichere Befestigung im ISO-Außenhalter oder in Bohrstangen. Der doppelseitige Spanbrecher unterstützt eine vorhersehbare Spanbildung und trägt zur Oberflächeinhaltung bei. Bei der Auswahl des passenden Halters sind Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke zu beachten, damit die Platte ihre Leistung optimal entfalten kann. Einsatzspektrum und wirtschaftlicher Nutzen Diese Wendeschneidplatte eignet sich besonders für Werkstätten und Serienfertigung, die rostfreien Stahl bearbeiten oder häufig unterbrochene Schnitte ausführen. Durch die verlängerte Standzeit und die stabile Spanbildung amortisieren sich Werkzeugkosten schneller, da weniger Wechsel und Nacharbeiten erforderlich sind. Die Platte ist damit für Anwender interessant, die Prozesssicherheit und konstante Oberflächengüten priorisieren. Hinweise zur Anwendung und Auswahl Für einen vollständigen Systemaufbau werden die ISO-Platte, ein passender Außenhalter oder eine Bohrstange, eine Unterlage beziehungsweise ein Klemmsatz und Ersatzschrauben benötigt. Der angegebene Freiwinkel von 0° und die Plattendicke von 4,76 mm beeinflussen die Schnittbedingungen; daher sollte beim Prozess-Setup die Schnittkraft und die Spankontrolle angepasst werden. Bei Unsicherheiten hilft die gezielte Auswahl eines passenden Spanbrechers und einer geeigneten Sortenwahl weiter. Empfehlung: Für sichere und produktive Zerspanung von rostfreiem Stahl die PVD-beschichtete Wendeplatte von Tungaloy wählen; bei Fragen zur Einbindung in den Halter oder zu Prozessparametern kontaktieren Sie Metav Werkzeuge direkt per E-Mail oder Telefon. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 Produktmerkmale Artikelnummer: 6903419 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: VNMG160412 AH6235 Tungaloy-Wendeplatte SKU Hersteller: TUN6903419 Fakten Eckenradius: 1,2 mm Winkel: 35° Plattendicke: 4,76 mm Plattengröße: 16 mm Besonderheiten Material: Hartmetall Beschichtung: PVD (verschleißreduzierende Schicht) Sorte: AH6235 (zähere Sorte für rostfreien Stahl) Schneidstofftyp: PVD-beschichtetes Hartmetall Spanbrecher: doppelseitig Freiwinkel: 0° Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: rhombisch Anwendung: Drehen FAQ Welche Werkstoffe lassen sich mit der VNMG 160412 AH6235 bearbeiten? Die VNMG 160412 AH6235 von Tungaloy ist besonders für rostfreien Stahl ausgelegt und eignet sich gut für Anwendungen mit erhöhter Ausbruchgefahr; je nach Schnittbedingungen kann sie auch bei anderen schwer zerspanbaren Werkstoffen eingesetzt werden. Welche Vorteile bietet die PVD-Beschichtung der Tungaloy-Wendeplatte? Die PVD-Beschichtung der Tungaloy-Wendeplatte erhöht die Verschleißfestigkeit und unterstützt eine stabile Schneidkante, was zu längerer Standzeit und konstanteren Oberflächengüten führt. Ist die Platte für unterbrochene Schnitte geeignet? Ja, die Sorte AH6235 wurde für zähere und stoßanfälligere Bearbeitungen formuliert und eignet sich daher für unterbrochene Schnitte sowie für Prozesse mit erhöhter Ausbruchgefahr. Wie beeinflussen Freiwinkel und Plattendicke die Auswahl des Halters? Freiwinkel 0° und die Plattendicke 4,76 mm erfordern einen Halter, der diese Maße und die Toleranzklasse unterstützt; die Kompatibilität hängt von Form, Befestigung und Größe ab. Welche Artikelnummer und SKU hat die Wendeplatte? Die Artikelnummer lautet 6903419 und die SKU des Herstellers ist TUN6903419, beides nützliche Angaben beim Nachbestellen oder beim Abgleich mit Lagerbeständen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
VNMG 160412 AH6235 Wendeplatten - Tungaloy
Combining PVD-coated carbide AH6235 toughness with a rhombic 35° geometry and a 1.2 mm corner radius ensures stable machining in interrupted cuts and for rostfreier Stahl; order the VNMG160412 AH6235 directly via Metav Werkzeuge or consult our technical team for tailored recommendations. VNMG160412 AH6235 ISO turning insert — PVD-coated carbide, 35° lead angle — Tungaloy The VNMG160412 AH6235 is an ISO rhombic turning insert designed for external and internal turning, offering a robust chip control solution for interrupted cuts and applications with increased breakout risk. PVD-coated carbide AH6235 for toughness Suitable for rostfreier Stahl and interrupted cuts Rhombic ISO 16 × 4.76 mm, 35° lead angle Double-sided chipbreaker, cylindrical locating hole Faster, more reliable turning of demanding materials The combination of a PVD-coated cutting grade and a tougher carbide substrate means the insert is engineered to resist chipping under unstable cutting conditions. The AH6235 grade targets applications with frequent interruptions and higher breakout risk, improving process stability when machining rostfreier Stahl. For production environments where tool change frequency directly affects throughput, this wear-resistant design contributes to a steadier cycle time and fewer unplanned stops, thereby supporting predictable output. Clear compatibility reduces set-up time and rejects Compatibility with toolholders is determined by geometry and mounting parameters rather than brand alone: ISO designation, form, 0° relief angle, tolerance class, fastening method, size and thickness must match the holder. The rhombic shape with a cylindrical locating hole and standard 16 mm inscribed circle simplifies selection for common external holders. Specifying the correct tolerance class and plate thickness (4.76 mm) avoids misfits and minimises set-up iterations, so machine shops benefit from quicker tool changes and less trial-and-error during first-off parts. Practical geometry that improves surface and edge security The rhombic plate form combined with a 35° lead angle delivers a good balance between cutting-edge strength and surface finish. The 1.2 mm corner radius reduces edge stress, helping to prevent micro-chipping on interrupted profiles, while the double-sided chipbreaker extends usable geometry before replacement. Together, these features reduce downtime and simplify logistics: fewer plate swaps, longer mean time between interventions and a predictable approach to finish quality on both profile turning and light ramping passes. For application guidance or to secure original Tungaloy inserts, contact Metav Werkzeuge for technical consultation and prompt supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6892206 Manufacturer SKU: TUN6892206 Model series: ISO-Drehwendeschneidplatten Facts Insert designation: VNMG160412 Size (inscribed circle): 16 mm Thickness: 4.76 mm Lead/angle: 35° Relief angle: 0° Corner radius: 1.2 mm Special features Coating: AH6235 (PVD-coated carbide) Material: carbide Shape: rhombic Hole: with cylindrical locating hole Chipbreaker: double-sided Intended application: turning (external and internal), interrupted cuts FAQ What materials is this insert suitable for? The VNMG160412 AH6235 insert is formulated for tougher materials and is especially suited to rostfreier Stahl and situations with interrupted cutting where chipping risk is elevated. How is holder compatibility determined for this ISO insert? Compatibility depends on form, relief angle (0°), tolerance class, fastening method, plate size (16 mm) and thickness (4.76 mm); matching these parameters ensures a secure fit with ISO external holders. Does the insert offer chip control for interrupted cuts? Yes, the double-sided chipbreaker and the AH6235 grade deliver improved chip control and edge security in interrupted cutting conditions. Is this an indexable, reversible insert? The rhombic, double-sided design allows both sides to be used where applicable, extending service life compared with single-sided plates. What is the manufacturer’s article number and SKU for ordering? Manufacturer article number 6892206 and SKU TUN6892206 identify the VNMG160412 AH6235 insert for ordering and stock control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 AH6235 Wendeplatten - Tungaloy
Take advantage of the PVD-coated AH6235 carbide grade and the 35° rhombic VNMG geometry for reliable performance in demanding turning tasks; the tougher composition and double-sided chipbreaker reduce breakouts and extend tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for process optimisation. VNMG 160412 AH6235 indexable turning insert — ISO VNMG, 35° rhombic by Tungaloy VNMG160412 AH6235 Tungaloy indexable insert for turning applications, PVD-coated carbide grade optimised for stainless steels and interrupted cuts PVD-coated carbide grade AH6235 For stainless steels and interrupted cuts Rhombic VNMG with 35° approach angle Double-sided chipbreaker, cylindrical hole Consistent cutting performance with a tougher PVD-coated grade The insert is made from a PVD-coated carbide designed as grade AH6235, providing a balance of toughness and wear resistance that is particularly suited to stainless steels and operations with frequent interruptions. The coating improves surface endurance under abrasive conditions, while the substrate’s toughness mitigates chipping in unstable cuts. This combination reduces scrap rates and supports longer uninterrupted machining cycles, which makes it a pragmatic choice where tool life and process reliability are priorities. Geometry and dimensions engineered for stable turning With a 35° rhombic geometry and a corner radius of 1.2 mm, the insert offers a controlled engagement in the cut that favours dimensional stability and surface finish. The insert thickness of 4.76 mm and the standard ISO VNMG160412 form ensure mechanical rigidity when paired with a suitable external holder or boring bar. The 0° relief angle and the central cylindrical hole enable secure clamping and repeatable siting in the tool pocket, reducing setup variation and maintaining consistent cutting conditions. Designed to handle interrupted cuts and breakout-prone materials The double-sided chipbreaker pattern and the tougher carbide composition make this insert advantageous for interrupted cutting and for workpieces with variable feed or hard inclusions. The chipbreaker geometry helps control chip flow and reduces the risk of built-up edge, improving both tool life and surface quality. For operations where breakouts are a concern, choosing this insert grade provides a practical reduction in downtime due to fewer insert changes and less unexpected tool failure. System compatibility and economical machining As an ISO-standard turning insert, compatibility with holders is governed by shape, relief angle, tolerance class, clamping method, size and thickness; typical system components include an external holder or boring bar, a locating shim and clamping screws. The insert’s double-sided form allows rotation to a fresh cutting edge, effectively doubling usable life per insert and improving cost-efficiency in batch production. Selecting appropriate holder rigidity and cutting parameters will convert the material and geometry benefits into measurable productivity gains. For reliable turning of stainless steels and challenging interrupted cuts, request the VNMG 160412 AH6235 from Metav Werkzeuge and benefit from application-focused advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable holders and cutting data. Technical data Article number: 6890143 SKU: 6890143-Tungaloy Manufacturer SKU: TUN6890143 Facts ISO designation: VNMG160412 Size: 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Approach angle: 35° Relief angle: 0° Special features Material: carbide Coating: PVD-coated (AH6235) Shape: rhombic (VNMG) Chipbreaker: double-sided Hole: cylindrical, with hole Typical application: turning Model series: ISO turning inserts FAQ What materials is this insert best suited for? The VNMG160412 AH6235 insert is optimised for stainless steels and other materials that benefit from a tougher PVD-coated carbide grade, with specific advantage in interrupted cuts. Can the insert be rotated or indexed to extend life? Yes. The double-sided VNMG form allows indexing to a fresh cutting edge, effectively extending service life before replacement is required. Is the VNMG160412 compatible with standard ISO holders? Compatibility depends on holder form, relief angle and clamping method; the insert follows ISO VNMG dimensions and fits holders designed for VNMG160412 geometry. How does the chipbreaker affect machining? The double-sided chipbreaker controls chip formation and evacuation, reducing built-up edge and improving surface finish in unstable cutting conditions. Which grade and coating does this insert use and what does that mean? The insert uses grade AH6235, a PVD-coated carbide offering increased toughness for breakout-prone and interrupted turning tasks, promoting longer life in such applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 AH8015 Wendeplatten - Tungaloy
The combination of a PVD-coated AH8015 grade and a 1.2 mm corner radius delivers a reliable balance of wear resistance and cutting-edge stability for machining heat‑resistant alloys; benefit from consistent tool life and stable chip control. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. VNMG 160412 AH8015 indexable turning insert for turning — Tungaloy A VNMG 160412 AH8015 indexable turning insert engineered for external and internal turning of heat‑resistant alloys, offering ISO compatibility and a robust edge geometry VNMG 160412 geometry for ISO holders PVD-coated carbide AH8015 for heat-resistant alloys 1.2 mm corner radius for robust edge strength Double-sided chipbreaker with cylindrical hole Consistent cutting performance that raises process reliability The insert’s combination of a PVD-coated surface and carbide substrate provides a stable cutting edge for demanding operations. The AH8015 grade is optimised for the general machining of heat‑resistant alloys, offering a measured trade‑off between wear resistance and edge stability. This translates into fewer interruptions for indexing or replacement and a predictable tool life that supports planning and cost control on the shop floor. Clear holder compatibility for fast tool changes Designed to ISO dimensions, the rhombic geometry and cylindrical hole make mounting straightforward in suitable ISO clamping systems. The insert’s form, clearance angle (0°), tolerance class and thickness determine holder compatibility; these are standardised factors that simplify selection of the correct external holder or boring bar. The ISO conformity reduces setup time and ensures repeatable seating and clamping, improving positional accuracy and reducing downtime. Improved chip control and edge security in tough alloys The double-sided chipbreaker is matched to the insert geometry to produce reliable chip formation across a range of cutting conditions. Together with the 1.2 mm corner radius, the design reduces the risk of edge chipping during interrupted cuts or when machining less stable workpiece setups. The result is smoother cutting, better surface finish and fewer rejects when working with heat‑resistant and difficult‑to‑machine materials. Practical advantages at the machine and in process planning Using an ISO indexable insert with a proven grade such as AH8015 allows consolidation of tool inventories and consistent process parameters across similar operations. The insert’s balanced properties support tolerances while offering cost‑efficient performance in serial production and batch work. For teams limited by machine rigidity or when turning thin‑walled components, the robust corner radius offers increased margin before edge failure, helping to maintain cycle times and reduce scrap. For application guidance or tailored cutting data for Tungaloy turning inserts, contact Metav Werkzeuge for personalised advice and technical documentation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6926576-Tungaloy Manufacturer SKU: TUN6926576 Manufacturer's article number: 6926576 Model series: ISO turning indexable inserts Material: Carbide Brand: Tungaloy Core data ISO designation: 160412 Insert size: 16 Corner radius: 1.2 mm Clearance angle: 0° Included hole: cylindrical Cutting angle: 35° Special features Coating / grade: AH8015, PVD-coated Chipbreaker: Double-sided Insert shape: Rhombic Application: Turning (external and internal) Compatibility: ISO holders by form, angle, size and thickness FAQ What materials is this insert best suited for? The VNMG 160412 AH8015 insert is aimed at the general machining of heat‑resistant alloys, offering a balance of wear resistance and edge stability for those materials. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge robustness and reduces chipping risk during interrupted cuts, contributing to longer usable edge life for this indexable insert. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions (160412) and is compatible with holders that match the form, clearance angle, tolerance class, size and thickness specified for ISO indexable turning inserts. What advantages does the AH8015 PVD coating provide? The PVD-coated AH8015 grade improves the insert’s resistance to adhesion and abrasive wear, making it suitable for higher temperatures encountered when turning heat‑resistant alloys. Can this insert be used for both external and internal turning? The insert’s rhombic shape and double-sided chipbreaker make it suitable for both external and internal turning when mounted in the appropriate ISO holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 AH8015 Wendeplatten - Tungaloy
High-performance PVD-coated carbide insert with a 1.2 mm corner radius and a double-sided chipbreaker for reliable turning of heat-resistant alloys. The ISO-compatible geometry and stable cutting edge support consistent productivity and predictable tool life. Order the VNMG160412 AH8015 directly via Metav Werkzeuge or consult our specialists for tailored application advice. VNMG160412 AH8015 Tungaloy indexable insert — PVD-coated carbide for turning The VNMG160412 AH8015 Tungaloy indexable insert is designed for turning applications, offering a balanced combination of wear resistance and cutting-edge stability for machining heat-resistant alloys. VNMG160412 by Tungaloy PVD-coated carbide grade AH8015 Double-sided chipbreaker, rhombic form 1.2 mm corner radius and 0° relief angle Maximum performance for heat-resistant alloys The PVD-coated carbide grade AH8015 is engineered as a first choice for general machining of heat-resistant alloys. The coating provides enhanced surface hardness and thermal resilience, which reduces flank wear under elevated cutting temperatures. In practice, this means longer intervals between indexings and fewer unexpected tool changes, supporting a steady production rhythm. The combination of PVD-coating and a balanced carbide substrate yields reliable cutting behaviour while preserving the integrity of the cutting edge. Precision geometry for consistent, repeatable results Built to ISO dimensions, the rhombic insert with a 1.2 mm corner radius and 0° relief angle creates a predictable contact geometry that helps maintain surface finish and dimensional accuracy. The rhombic form distributes cutting forces evenly and the cylindrical locating hole ensures secure clamping in standard holders. The insert’s 16 mm size and 4.76 mm plate thickness contribute to rigidity in moderate- to heavy-duty turning operations. For those unfamiliar with the terms: relief angle controls the clearance behind the cutting edge, and the corner radius influences edge strength and surface finish — larger radii favour edge stability, smaller radii favour sharper profiles. Integration into production and handling efficiency The double-sided design effectively halves tooling inventory and simplifies logistics while supporting predictable tool-change routines. Compatibility with ISO-standard holders and the clearly defined mounting features reduce set-up time and inspection effort. Selecting this grade and chipbreaker is a technical decision that balances machining stability with cycle-time demands: the double-sided chipbreaker helps manage chip flow and reduces rework caused by poor chip control. For customers seeking reliable continuity in series production, this insert supports reproducible outputs and process stability. For machining heat-resistant alloys with confidence, ask Metav Werkzeuge about the VNMG160412 AH8015 Tungaloy indexable inserts and receive application-focused advice from our technical team via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6741716 Manufacturer: Tungaloy Manufacturer article number: 6741716 Manufacturer SKU: TUN6741716 Model series: ISO turning indexable inserts Facts Corner radius: 1.2 mm Relief angle: 0° Insert size: 16 mm Plate thickness: 4.76 mm Included hole: cylindrical Cutting angle: 35° Special features PVD-coated carbide (AH8015) Double-sided chipbreaker Rhombic form, with cylindrical hole ISO-standard VNMG160412 Suitable for turning; optimised for heat-resistant alloys FAQ What materials is this insert suited for? The VNMG160412 AH8015 insert is optimised for machining heat-resistant alloys; the AH8015 grade balances wear resistance and cutting-edge stability for these materials. How does the double-sided chipbreaker benefit production? A double-sided chipbreaker doubles usable edges per insert and improves chip control, which reduces downtime and inventory complexity when using VNMG160412 AH8015. Is the insert compatible with standard ISO holders? Yes; the insert conforms to ISO dimensions and its cylindrical locating hole and form ensure compatibility with ISO-standard turning holders. What does the 1.2 mm corner radius mean for surface finish? A 1.2 mm corner radius increases edge robustness and tends to produce a smoother surface finish while offering higher resistance to edge chipping in interrupted cuts. Which properties does the PVD coating add? The PVD coating on the AH8015 grade enhances surface hardness and thermal resistance, improving wear performance under elevated cutting temperatures and extending edge life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 AH8015 Wendeplatten - Tungaloy
Taking advantage of a PVD‑coated carbide grade optimised for heat‑resistant alloys and a robust 1.2 mm corner radius, this insert delivers stable cutting performance and long tool life in general turning operations; order directly via Metav Werkzeuge or consult the team for application support. VNMG160412 AH8015 ISO turning insert — PVD‑coated carbide by Tungaloy A VNMG160412 AH8015 rhombic ISO insert for turning, engineered for general machining of heat‑resistant alloys and versatile external and internal operations ISO rhombic insert VNMG160412 PVD-coated carbide AH8015 1.2 mm corner radius for robust cuts Double-sided geometry with cylindrical hole Consistent cutting performance for heat‑resistant alloys The PVD‑coated carbide grade AH8015 is developed as a balanced solution between wear resistance and cutting‑edge stability, making it a reliable choice for the machining of heat‑resistant alloys. The coating reduces adhesion and thermal softening at elevated cutting temperatures, which extends the interval between indexings and minimises unplanned downtime. As an ISO‑standardised insert, it supports predictable process results when paired with the appropriate holder and clamping setup. The result is a steadier production flow and more consistent component tolerances. Geometry designed for both roughing and finishing A 1.2 mm corner radius combined with the rhombic VNMG form delivers mechanical strength at the cutting edge while still allowing fine surface finishes where required. The double‑sided design increases usable cutting edges per insert, and the cylindrical centre hole ensures secure and repeatable clamping in ISO‑compatible cutters and boring bars. Together these features enable efficient material removal rates during roughing and controlled cutting for semi‑finish passes, reducing tool change frequency and setup time. Practical compatibility and process advantages Compliance with the ISO insert family means compatibility depends on form, relief angle and size; the relief angle 0° and 35° main cutting angle are typical for stable external and internal turning configurations. Selecting a chipbreaker and grade that match the workpiece and machining stability ensures optimal chip control and surface integrity. The insert’s PVD-coated carbide composition supports a wide process window, which simplifies tool selection for job shops and production environments aiming for repeatable, cost‑efficient turning operations. Contact Metav Werkzeuge for tailored application advice on the Tungaloy VNMG160412 AH8015 or to arrange prompt delivery and technical support; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6966288 SKU: 6966288-Tungaloy Manufacturer SKU: TUN6966288 Model series: ISO-Drehwendeschneidplatten Material: Carbide Core measurements Corner radius: 1.2 mm Cutting angle: 35° Relief angle: 0° Thickness: 4.76 mm Inscribed circle / size: 16 mm Special features PVD-coated carbide AH8015 Rhombic VNMG form (VNMG160412) Double-sided chipbreaker Cylindrical centre hole ISO-compliant insert Intended application: turning FAQ What materials is this insert best suited for? The VNMG160412 AH8015 is primarily intended for general machining of heat‑resistant alloys; the PVD coating and carbide substrate provide balanced wear resistance and edge stability for such materials. How does the AH8015 grade help with tool life? The AH8015 PVD‑coated carbide reduces thermal wear and adhesive tendencies during elevated‑temperature cutting, which prolongs the service life of the insert and maintains edge integrity for longer intervals. Is this insert compatible with standard VNMG holders? Yes. The insert follows ISO dimensions, and compatibility with a holder depends on matching the form, relief angle, tolerance class, clamping method, size and thickness of the insert. What advantages does the 1.2 mm corner radius offer? A 1.2 mm radius increases cutting‑edge strength for interrupted or tough cutting conditions while remaining small enough to achieve a good surface finish in semi‑finishing passes. Can the insert be used for both external and internal turning? The rhombic geometry and ISO form permit both external and internal turning when installed in a suitable external holder or boring bar designed for VNMG inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-compliant geometry, PVD-coated AH8015 carbide, and secure clamping for consistent turning performance; order the insert via Metav Werkzeuge or consult the technical team for application advice. VNMG160412 AH8015 turning insert (ISO) by Tungaloy — PVD-coated carbide, 35° lead angle A VNMG160412 AH8015 ISO turning insert designed for external and internal turning of heat-resistant alloys, featuring a rhombic form with cylindrical hole and a 1.2 mm corner radius. ISO-compliant rhombic insert, 35° PVD-coated carbide AH8015, heat-resistant alloys 1.2 mm corner radius for stable cutting Double-sided chipbreaker, cylindrical hole Consistent tool matching through ISO-compliant geometry The insert is part of an ISO turning insert series, which ensures compatibility with standard holders when form, relief angle, tolerance class, mounting method, size and thickness are matched. Interchangeability is enabled because the geometry is specified to ISO norms; the mounting interface and the cylindrical hole permit repeatable seating and clamping, so tool changes and inventory management are simplified. This objective standardisation reduces downtime and supports consistent process planning across different machines and setups. Balanced grade and coating for machining heat-resistant alloys The PVD-coated carbide grade AH8015 offers a balance between wear resistance and cutting edge stability, making it a first-choice grade for general machining of heat-resistant alloys. The PVD layer helps resist adhesive wear at elevated temperatures and supports sustained cutting performance in typical turning operations. Selecting the appropriate chipbreaker and grade according to workpiece material and machine rigidity will extend edge life and improve cost-efficiency per machined component while maintaining reliable surface finish in both external and internal turning. Robust edge geometry and secure clamping for productive turning A 1.2 mm corner radius and double-sided chipbreaker deliver robustness and two usable edges per index, improving economy without sacrificing edge strength. The rhombic plate form combined with a cylindrical hole ensures secure clamping and repeatable positioning in compatible holders, which reduces vibration and enhances dimensional consistency. The 35° lead angle moderates cutting forces and can contribute to improved surface quality under typical turning feeds. Together, these features support stable chip control and predictable tool life in serial production. For reliable machining of heat‑resistant alloys with Tungaloy inserts, contact Metav Werkzeuge for availability and tailored application advice — eMail: info@metav-werkzeuge.com or Telefon: +49 2822 7131930 Technical Data Article number: 6947463 SKU: 6947463-Tungaloy Manufacturer SKU: TUN6947463 Manufacturer: Tungaloy Facts Size: 16 mm Corner radius: 1.2 mm Lead angle: 35° Relief angle: 0° Double-sided chipbreaker Special features Rhombic plate form Cylindrical hole PVD coating Carbide grade AH8015 ISO designation VNMG160412 Application: Turning FAQ What materials is this insert suitable for? The VNMG160412 AH8015 insert is intended for heat-resistant alloys and general alloy machining; the AH8015 grade balances wear resistance and edge stability for such applications. How does the cylindrical hole affect toolholding? A cylindrical hole provides reliable seating and repeatable positioning in compatible holders, improving clamping security and reducing the likelihood of movement during turning. Is the insert reversible to use multiple edges? Yes, the insert features a double-sided chipbreaker, providing two indexable edges for economical use and straightforward re‑indexing. What benefits does the PVD coating offer? The PVD-coated surface enhances resistance to adhesive wear at elevated temperatures and contributes to prolonged edge life when machining demanding alloys. Which holders are compatible with this ISO insert? Compatibility is determined by form, relief angle, tolerance class, mounting method, size and thickness; the ISO designation VNMG160412 facilitates selection of suitable external holders and boring bars. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 AH905 Wendeplatten - Tungaloy
Take advantage of a wear- and fracture-resistant AH905 PVD-coated carbide grade combined with a rhombic VNMG geometry and a 1.2 mm corner radius to ensure stable cutting and consistent surface quality in turning operations; order directly via Metav Werkzeuge or consult the team for application-specific advice. VNMG 160412 AH905 Turning insert by Tungaloy – PVD-coated carbide, rhombic ISO turning insert for general turning A VNMG160412 AH905 rhombic ISO turning insert designed for external and internal turning, featuring a 1.2 mm corner radius, double-sided chipbreaker and a cylindrical central hole for secure clamping and repeatable performance. Rhombic VNMG geometry, ISO 160412 AH905 PVD-coated carbide for wear resistance 1.2 mm corner radius for stable cutting Double-sided chipbreaker with central hole Reliable wear resistance for high-process stability The PVD-coated AH905 grade offers a balance of wear and fracture resistance that supports repeatable machining results. The carbide substrate provides fundamental toughness, while the PVD coating improves wear behaviour during dry or lubricated cutting. This combination reduces flank and crater wear rates, which in turn maintains dimensional accuracy over longer tool life and fewer insert changes. For process planners, this means predictable tool change intervals and improved machine utilisation. Versatile geometry for a wide range of turning tasks The rhombic VNMG form with a 35° lead angle enables efficient chip flow and adaptable cutting directions for both external and internal turning. The 1.2 mm corner radius stabilises the cutting edge in interrupted cuts and when machining variable cross-sections, improving surface finish and reducing vibration. The double-sided design offers economical indexability, and the central cylindrical hole ensures positive seating in compliant ISO-compatible holders, supporting secure clamping and consistent axial position. Clear compatibility and straightforward mounting Compatibility with holders is determined by form, relief angle, tolerance class, fastening type, size and thickness; the insert features a 0° relief angle and a plate thickness of 4.76 mm, matching standard ISO clamping systems. Select a matching external holder or boring bar that accepts ISO 160412 geometry and provides the correct clearance and clamping torque. For less experienced buyers, specifying the insert code together with the holder model number ensures correct pairing and avoids downtime due to incorrect mounting. Productivity gains and economical operation Using a PVD-coated, double-sided indexable insert reduces per-part tooling cost through multiple effective cutting edges and extended life under stable cutting conditions. The carbide base and AH905 coating support productive turning of a broad range of steels and cast irons when appropriate chipbreakers and cutting parameters are selected. Focusing on process stability and correct insert selection pays off in fewer tool changes, consistent part quality and improved overall process efficiency. Contact Metav Werkzeuge for detailed application advice, order specification assistance and to procure the Tungaloy VNMG160412 AH905 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support. Technical Data Article number: 6859408 Manufacturer SKU: TUN6859408 SKU: 6859408-Tungaloy Name: VNMG160412 AH905 Tungaloy insert Material: carbide Series: ISO turning inserts Core specifications Thickness: 4.76 mm Corner radius: 1.2 mm Size (inscribed circle): 16 mm Relief angle: 0° Lead angle: 35° Double-sided insert Design & features Grade/coating: AH905 PVD-coated carbide Shape: rhombic (VNMG) Hole: with cylindrical hole Chipbreaker: double-sided Application: turning ISO designation: 160412 FAQ What materials is this insert suited for? The VNMG160412 AH905 insert is designed as a wear- and fracture-resistant solution for general turning; it is suitable for a wide range of steels and typical cast iron applications when combined with the appropriate chipbreaker and cutting data. How is the insert clamped in the holder? The insert uses a central cylindrical hole and ISO VNMG geometry for secure seating; ensure the selected holder matches ISO 160412 form, clamping style and thickness for correct torque and repeatable positioning. How many cutting edges are available per insert? The double-sided indexable design provides multiple cutting edges per insert, allowing economical rotation and re-indexing to extend life before replacement. Which relief and lead angles does the insert offer? This insert is supplied with a 0° relief angle and a 35° lead angle, making it compatible with common ISO holders and suitable for a range of turning strategies. Is the AH905 grade suitable for interrupted cuts? The AH905 grade combines wear resistance with resistance to chipping, which supports performance in intermittent cuts—select cutting parameters and holder rigidity appropriate to the operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 GH330 Wendeplatten - Tungaloy
Take advantage of the proven combination of ISO compatibility, a balanced GH330 grade and a robust 1.2 mm corner radius for consistent turning performance and reduced tool changes; order the VNMG160412 GH330 Tungaloy insert directly via Metav Werkzeuge or ask the consultants if needed. VNMG 160412 GH330 ISO rhombic turning insert, 35° cutting angle — Tungaloy The VNMG160412 GH330 is a rhombic, ISO‑normed indexable insert engineered for external and internal turning operations where balanced wear resistance and edge stability are required. ISO rhombic insert with 35° cutting angle GH330 grade for wear resistance and toughness 1.2 mm corner radius for robust profile Double-sided insert with cylindrical hole Engineered for dependable turning and edge stability The VNMG160412 grade combines a Tungaloy carbide substrate with the GH330 specification to deliver a balance of wear resistance and toughness. That balance helps maintain a stable cutting edge under intermittent or continuous cutting loads, which reduces rework and the frequency of tool changes. The rhombic geometry with a 35° cutting angle provides effective engagement for facing and profile turning, while the 1.2 mm corner radius increases edge strength for medium to heavier depth cuts. As an ISO insert, it is indexable and reversible, allowing economical use of all available cutting edges. Designed for secure clamping and predictable chip control Compatibility to the toolholder is governed by the insert form, relief angle (0°), tolerance class, fastening method, size and thickness (4.76 mm). The cylindrical centre hole supports positive and repeatable clamping in standard VNMG pockets, while the double-sided chipbreaker design aids chip formation and evacuation across a range of cutting conditions. The presence of a defined chip control geometry reduces the risk of built-up edge and supports consistent surface finish, translating into fewer interruptions and improved process stability during turning tasks. Practical benefits for workshop productivity and process planning Using an indexable insert of this specification simplifies inventory and shortens set‑up times: worn edges can be rotated to reveal a fresh cutting edge rather than replacing the entire tool. The tungsten carbide construction and GH330 grading complement the insert geometry to prolong effective tool life and maintain dimensional repeatability. For production environments where tool change frequency and predictable component quality matter, this insert supports lower overall tooling costs through extended performance per cutting edge and reliable chip behaviour. Select the Tungaloy GH330 VNMG160412 insert for balanced performance and contact Metav Werkzeuge for tailored recommendations and delivery options. Technical Data Article number: 6809514 Manufacturer SKU: TUN6809514 Our SKU: 6809514-Tungaloy Model series: ISO turning indexable inserts Core data Size: 16 Thickness: 4.76 mm Corner radius: 1.2 mm Cutting angle: 35° Relief angle: 0° Special features Grade: GH330 Carbide substrate: Tungaloy grade Shape: rhombic Hole: with hole (cylindrical hole) Chipbreaker: double-sided Application: Turning Material: tungsten carbide ISO designation: VNMG160412 FAQ What applications suit this insert best? The VNMG160412 GH330 insert is intended for external and internal turning; the GH330 grade provides a balance of wear resistance and toughness suitable for a broad range of general turning operations. How is the insert clamped and indexed? The insert uses a cylindrical centre hole for secure clamping in standard VNMG pockets and is double-sided, allowing indexing to fresh cutting edges as edges wear. What does the 1.2 mm corner radius mean for machining? A 1.2 mm corner radius increases edge robustness, improving stability and resistance to chipping during heavier cuts while influencing the achievable surface finish. Is this an ISO-standard insert and how does that help? Yes; the VNMG160412 follows ISO norms, ensuring compatibility with matching ISO VNMG holders when the form, relief angle, tolerance class, fastening and thickness are observed. Which product details identify this insert for order and traceability? Order and trace using the article number 6809514, manufacturer SKU TUN6809514 and our SKU 6809514-Tungaloy; these identify the VNMG160412 GH330 Tungaloy turning insert precisely. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 GT9530 Wendeplatten - Tungaloy
Combine the coated cermet GT9530 with a 1.2 mm corner radius and the ISO VNMG160412 format for improved surface finish and extended tool life in stable turning setups; order directly via Metav Werkzeuge or contact our consultants for application support. VNMG160412 GT9530 ISO rhombic turning insert — coated cermet, 35° (Tungaloy) VNMG160412 GT9530 is an ISO‑standard rhombic indexable insert for turning, optimised for finishing and light universal steel operations in stable setups Coated cermet grade GT9530 1.2 mm corner radius for fine surface finish ISO VNMG160412 rhombic form Double-sided with cylindrical hole Longer tool life and finer surface quality with coated cermet The combination of the GT9530 coating and the insert geometry delivers a significant advantage when finishing steel components. The coated cermet matrix is engineered for wear resistance under steady cutting conditions, which reduces flank wear and keeps dimensional variance low over longer tool life. The 1.2 mm corner radius helps distribute cutting forces and promotes a consistent surface finish, while the rhombic shape supports versatile approach angles. For operations where a smoother part surface and predictable insert life are priorities, this grade reduces the need for frequent index changes and rework. Reliable compatibility and secure clamping for stable turning Compatibility with the clamping system is ensured by the ISO designation and defined dimensional parameters: form, clearance angle, tolerance class, fastening type, size and thickness determine fit. The insert’s cylindrical hole and double‑sided design permit positive seating and economical indexability, enabling quick rotation to the next cutting edge. When combined with an appropriate external holder or boring bar, plus the correct shim and clamping kit, the system delivers repeatable positioning and safe chip control. This reliable mechanical interface supports process stability and reduces setup time in the workshop. Practical advantages for finishing and light universal turning Designed primarily for turning applications, the insert suits both external and internal operations where good surface integrity and extended edge life are required. The 35° approach angle and 0° clearance angle are shaped for finishing passes and light roughing where tool deflection is low. The double‑sided chipbreaker supports chip formation adapted to the workpiece material and machining conditions; selecting the right chipbreaker and grade combination is essential for controlled chips and consistent part quality. For shops focusing on productivity with predictable outcomes, this insert provides a cost‑effective route to fewer interruptions and higher first‑pass yield. For precise application advice, batch availability or to discuss holder compatibility for the Tungaloy VNMG160412 GT9530 insert, please contact Metav Werkzeuge by e‑mail or phone; our consultants will provide tailored recommendations and delivery options. Technical data Article number: 6723283-Tungaloy Manufacturer SKU: TUN6723283 Manufacturer article number: 6723283 Brand: Tungaloy Facts ISO designation: VNMG160412 Insert size: 16 Thickness: 4.76 mm Corner radius: 1.2 mm Approach angle: 35° Clearance angle: 0° Special features Coated cermet grade GT9530 Double-sided chipbreaker Rhombic insert form Cylindrical hole (with screw) Suitable for external and internal turning FAQ What materials is this insert intended for? The VNMG160412 GT9530 insert is designed primarily for steel finishing and light universal use; the GT9530 coated cermet offers wear resistance suited to stable machining conditions. How is the insert secured in the holder? The insert uses a cylindrical hole and fits ISO‑standard clamping systems; secure seating is achieved with the correct external holder, shim and clamping set compatible with VNMG160412 geometry. How many cutting edges are available per insert? This is a double‑sided indexable insert, providing two usable cutting edges per side depending on orientation and indexability rules for the VNMG geometry. Which chipbreaker should be selected for general finishing? A fine or moderate chipbreaker matched to the GT9530 grade and the workpiece material is recommended to ensure controllable chips and a consistent surface finish during finishing passes. Is this insert suitable for internal turning? Yes, the rhombic VNMG form and the 35° approach angle make the insert suitable for both external and internal turning operations when used with a compatible boring bar or internal holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and ISO compatibility for reliable production results; order genuine Tungaloy inserts through Metav Werkzeuge or consult the team for application support. VNMG 160412 NS9530 — Turning insert (uncoated cermet, 35°) by Tungaloy The VNMG160412 NS9530 is an ISO‑standard indexable turning insert designed for fine finishing of steel components in continuous‑cut applications. ISO‑standard rhombic 16 mm insert Uncoated cermet NS9530 for fine finishing Cylindrical hole and double‑sided chipbreaker Low cutting forces and high surface quality Achieve finer surfaces with lower cutting forces The uncoated cermet grade NS9530 provides a sharp cutting edge and reduced adhesion tendencies, resulting in low cutting forces and an improved finish on steel. As a finishing grade it is tailored for small depths of cut and continuous feeds, where the combination of edge stability and chip control produces consistent surface integrity. The fine microstructure of the cermet helps to maintain edge geometry over longer cycles, reducing the need for frequent index changes and supporting predictable machining throughput. Consistent fit and simple integration into ISO systems Supplied as an ISO‑standard insert, compatibility with toolholders is determined by form, relief angle, tolerance class, fastening method, size and thickness. The rhombic VNMG160412 form and the cylindrical hole make it suitable for a broad range of external holders and boring bars; the specified 0° relief angle and the 35° lead orientation ensure correct seating and cutting geometry. When selecting a holder, match the insert geometry and thickness to maintain clamping accuracy and minimise vibration for best surface results. Stable chip formation and repeatable productivity A double‑sided chipbreaker and the robust cermet substrate support predictable chip evacuation and stable chip formation during finishing cuts. This reduces the risk of built‑up edge and improves process stability, particularly in continuous cut scenarios. The insert’s sharp edge and material behaviour favour low cutting forces, which in turn helps to extend tool life and maintain part tolerances across long production runs. Practical recommendations for finishing steel For finishing operations on steel, use modest feed rates and shallow depths of cut to exploit the NS9530 grade’s strengths: superior surface quality and edge stability. The insert is intended for finishing rather than heavy roughing; pair the insert with a suitably rigid holder and ensure proper clamping torque on the mounting screw. The system build typically comprises the ISO insert, a matching external holder or boring bar, a shim/clamping set and replacement screws to guarantee repeatable clamping accuracy. Contact Metav Werkzeuge for tailored recommendations and to order genuine Tungaloy VNMG160412 NS9530 turning inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998235 SKU: 6998235-Tungaloy Manufacturer SKU: TUN6998235 Model series: ISO indexable turning inserts Brand: Tungaloy Core specifications ISO designation: 160412 Size (inscribed circle): 16 mm Thickness: 4.76 mm Corner radius: 1.2 mm Lead angle: 35° Relief angle: 0° Hole: with cylindrical hole Grade/coating: NS9530 (uncoated cermet) Design & features Rhombic plate form Double‑sided chipbreaker Carbide substrate suitable for finishing Application: turning / finishing steel System components: compatible holder, shim/clamp set, replacement screws ISO‑standard insert compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ How does the NS9530 grade differ from conventional carbide grades? The NS9530 uncoated cermet grade focuses on a very sharp edge and low cutting forces, which delivers improved surface finish and longer edge life in finishing cuts compared with some conventional carbide grades. Is the VNMG160412 suitable for external and internal turning? Yes, the VNMG160412 insert is designed for both external and internal turning applications when paired with an appropriate holder or boring bar that matches its geometry and clamping method. How many usable cutting edges does this insert provide? The insert is double‑sided; depending on orientation and indexing practice, multiple edges can be used before replacement, offering cost‑effective utilisation of the plate. What cutting conditions are recommended for finishing steel with this insert? Use shallow depths of cut and moderate feed rates for continuous cuts to exploit the grade’s low cutting forces and to achieve the best surface quality and dimensional control. Can this insert be used for interrupted cuts or roughing operations? The VNMG160412 NS9530 is optimised for finishing and continuous cuts; interrupted heavy roughing is not ideal for this grade and may reduce edge life or performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
VNMG 160412 NS9530 Wendeplatten - Tungaloy
VNMG160412 NS9530 Tungaloy-Wendeplatte für Drehen Die VNMG160412 NS9530 Tungaloy-Wendeplatte ist eine ISO-genormte Schlichtplatte für präzises Außen- und Innendrehen mit niedrigen Schnittkräften und hoher Oberflächengüte. Schlichtsorte für beste Oberflächengüte Unbeschichtetes Cermet mit scharfer Schneidkante ISO-kompatibel, einfache Halterprüfung Doppelseitiger Spanbrecher für lange Standzeit Höhere Prozesssicherheit bei Schlichtoperationen Für feinste Oberflächen in Stahlbearbeitungen sorgt diese ISO-Drehwendeschneidplatte durch die Kombination aus scharfer Schneidkante und niedrigem Spanauftrag. Die Sorte NS9530 wurde als Schlichtsorte konzipiert und ermöglicht damit kontinuierlichen Schnitt bei kleinen Zustellungen, was Ausschuss reduziert und Nacharbeit minimiert. Anwender profitieren von gleichbleibender Bauteilqualität und planbaren Nacharbeitszeiten. Materialeigenschaften und wirtschaftlicher Nutzen Die Platte besteht aus Hartmetall mit unbeschichtetem Cermet, wodurch die Schneidkante besonders scharf bleibt und die Schnittkräfte gering ausfallen. Das reduziert den Werkzeugverschleiß und verlängert die Werkzeugstandzeit in Schlichtprozessen. Der daraus resultierende Vorteil ist eine höhere Produktivität bei gleichbleibender Maß- und Oberflächenqualität. Anwendungsfelder, Einspannung und Werkstoffwahl Die Wendeplatte VNMG160412 NS9530 eignet sich primär für das Drehen von Stahl in Schlichtgängen; bei ruhiger Schnittführung liefert sie hervorragende Ra-Werte. Die Kompatibilität zum Halter richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Für die Auswahl des optimalen Halters empfiehlt sich die Überprüfung der Freiwinkel- und Toleranzangaben vor der Erstmontage. Einfache Handhabung und Montagehinweise Durch das zylindrische Loch und die ISO-Form ist die Platte schnell und zuverlässig einspannbar, wobei die doppelseitige Ausführung den wirtschaftlichen Einsatz erhöht: Nach dem Wenden steht sofort die zweite Schneide zur Verfügung. Der geringe Freiwinkel unterstützt das Schlichten mit niedrigen Zustellungen und reduziert Vibrationen bei instabiler Aufspannung. Empfehlung: Für präzise Schlichtbearbeitung die NS9530-Sorte von Tungaloy wählen; bei Fragen zur Anwendung technische Beratung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfordern. Produktmerkmale Artikelnummer: 6998238 Hersteller: Tungaloy Artikelbezeichnung: VNMG160412 NS9530 Tungaloy-Wendeplatte Modellserie: ISO-Drehwendeschneidplatten SKU: TUN6998238 Daten Eckenradius: 1,2 Winkel: 35° Plattendicke: 4,76 Plattengröße: 16 Freiwinkel: 0° Besonderheiten Material: Hartmetall Sorte: NS9530 (Schlichtsorte für Stahl) Schneidstofftyp: unbeschichtetes Cermet Spanbrecher: doppelseitig Loch: mit Loch Lochstil: zylindrisches Loch Plattenform: rhombisch Anwendung: Drehen FAQ Ist die Wendeplatte für Innen- und Außenbearbeitung geeignet? Ja, die VNMG160412 NS9530 Tungaloy-Wendeplatte ist für Außen- und Innendrehen ausgelegt und liefert in Schlichtgängen besonders gute Oberflächenergebnisse. Welches Material ist mit dieser Sorte ideal zu bearbeiten? Die NS9530-Sorte wurde speziell als Schlichtsorte für Stahl entwickelt; die Kombination aus unbeschichtetem Cermet und scharfer Schneidkante optimiert Oberflächengüte und Schneidkraft. Wie groß ist der Eckenradius und welche Bedeutung hat er? Der Eckenradius beträgt 1,2; ein kleinerer Radius unterstützt feinere Oberflächen und genauere Maßhaltigkeit bei Schlichtoperationen. Welche Vorteile bietet der doppelseitige Spanbrecher? Der doppelseitige Spanbrecher erhöht die Wirtschaftlichkeit, da nach dem Wenden direkt eine zweite Schneide verfügbar ist und Stillstandzeiten reduziert werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com