WNMG 080408 T9225 Wendeplatten - Tungaloy
WNMG 080408 T9225 Wendeschneidplatte für Drehen – Tungaloy Die WNMG 080408 T9225 ist eine ISO-genormte Wendeschneidplatte für das Außen- und Innendrehen, ausgelegt auf robuste, produktive Stahlbearbeitung mit CVD-beschichtetem Hartmetall. Wendeschneidplatte WNMG 080408 T9225 CVD-beschichtetes Hartmetall für Stahlbearbeitung Trigonform mit 0° Freiwinkel und zylindrischem Loch Eckenradius 0,8 mm für feine Oberflächenqualität Universalsorte DM für mittlere bis schwere Schnitte Produktperformance für produktive Zerspanung Die Wendeschneidplatte kombiniert CVD-Beschichtung und eine robuste Hartmetallbasis, was zu konstanter Standzeit und stabiler Spanbildung führt. Der Spanbrecher DM wurde für wechselnde Eingriffsbedingungen entwickelt und sorgt für kontrollierten Spanfluss selbst bei leicht unterbrochenem Schnitt. Dieser Aufbau ermöglicht eine hohe Prozesssicherheit und unterstützt eine effiziente Bearbeitung, sodass Rüstzeiten reduziert und Stillstände minimiert werden. Werkstoff und Beschichtung verständlich erklärt Die Platte besteht aus Hartmetall mit einer CVD-Beschichtung; CVD steht für chemische Dampfbeschichtung und liefert eine harte, verschleißbeständige Schicht. Die Sorte T9225 ist als Universalsorte für mittlere bis schwere Stahlbearbeitung konzipiert und bietet eine ausgewogene Kombination aus Zähigkeit und Verschleißschutz. Für Anwender bedeutet das: weniger Werkzeugwechsel, zuverlässigere Oberflächen und vorhersehbare Werkzeugfolgezeiten. Anwendungsbereich und Systemkompatibilität Die ISO-Genormung garantiert die Einsetzbarkeit in gängigen Außenhaltern und Bohrstangen, die auf Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke abgestimmt sein müssen. Die Trigonform und das zylindrische Loch ermöglichen einfache Montage und sichere Fixierung. Im Systemaufbau empfiehlt sich die Kombination mit passender Unterlage/Klemmsatz und Ersatzschrauben, um Wiederholgenauigkeit und Stabilität bei Serienbearbeitung zu gewährleisten. Zielgruppe und Praxisvorteile im Alltag Die Platte richtet sich an Lohnfertiger, Werkstätten und Produktionsbetriebe, die robuste Lösungen für die Stahlbearbeitung suchen. Der Eckenradius von 0,8 mm verbessert die Oberflächengüte bei Schrupp- und Schlichtgängen und erleichtert die Werkstückablage. Durch die universelle Auslegung reduziert sich die Teilevielfalt im Lager; Anwender profitieren von längeren Standzeiten und konsistenter Bearbeitungsqualität. Die WNMG 080408 T9225 von Tungaloy für zuverlässige Stahlbearbeitung direkt bei Metav Werkzeuge anfragen — technische Beratung per info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: 6780717 Hersteller: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080408-DM T9225 Hersteller SKU: TUN6780717 Fakten Eckenradius: 0,8 mm Winkel: 80° Plattendicke: 4,76 mm Plattengröße: 08 Freiwinkel: 0° Loch: zylindrisches Loch Besonderheiten Schneidstoff: CVD-beschichtetes Hartmetall (T9225) — Chemische Dampfbeschichtung für hohe Standzeit Spanbrecher: DM — Universeller Spanformer für stabile Spanbildung Plattenform: Trigon Einsatz: Drehen, Außen- und Innendrehen Norm: ISO-genormt Kompatibilität: Form, Freiwinkel, Befestigung, Größe, Dicke Einsatzgebiet: mittlere bis schwere Stahlbearbeitung FAQ Ist die Platte mit gängigen Außenhaltern kompatibel? Die WNMG 080408 T9225 ist ISO-genormt und somit mit den meisten marktüblichen Außenhaltern kompatibel, sofern Form, Freiwinkel, Befestigung, Größe und Dicke übereinstimmen. Für welche Werkstoffe ist die Sorte T9225 geeignet? Die Sorte T9225 wurde für mittlere bis schwere Stahlbearbeitung entwickelt und bietet Zähigkeit für wechselnde Eingriffsbedingungen. Welchen Effekt hat der Eckenradius 0,8 mm auf die Oberfläche? Ein Eckenradius von 0,8 mm trägt zu einer besseren Oberflächenqualität bei und reduziert die Gefahr von Gratbildung bei Schlichtgängen. Was bedeutet CVD-beschichtetes Hartmetall praktisch für die Standzeit? CVD-Beschichtung erhöht den Verschleißschutz und sorgt dafür, dass die Tungaloy WNMG 080408 T9225 länger im Prozess eingesetzt werden kann, ohne Einbußen bei der Schneidkante. Wie lautet die Herstellerartikelnummer und SKU für Bestellungen? Die Herstellerartikelnummer lautet 6780717 und die Hersteller SKU ist TUN6780717, beides hilfreiche Angaben für Bestellung und Lagerhaltung. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 T9225 Wendeplatten - Tungaloy
Choose the robust combination of CVD-coated carbide T9225 and a 0.8 mm corner radius for reliable mid-to-heavy steel turning; order the insert directly via Metav Werkzeuge or request consultancy for process integration. WNMG 080408 T9225 — Turning insert WNMG080408-ASW T9225 (Tungaloy) A WNMG080408-ASW T9225 ISO turning insert for general-purpose external and internal turning, engineered for medium-to-heavy steel machining with interrupted cuts and variable engagement. CVD-coated carbide T9225 for mid-to-heavy turning 0.8 mm corner radius for robust edge strength ASW chipbreaker optimised for mixed cutting ISO WNMG 080408 form with cylindrical hole Reliable cutting performance for demanding steel work The CVD-coated T9225 grade delivers a balanced combination of hardness and toughness, designed for medium-to-heavy steel machining where variable cutting conditions occur. The CVD coating improves wear resistance at elevated temperatures, while the substrate material maintains fracture resistance during light interruptions. Together with the 0.8 mm corner radius, the geometry reduces the risk of edge chipping and extends insert life, contributing to higher process stability and fewer tool changes. This leads to predictable cycle times and effective utilisation of machine capacity. Clear guidance on compatibility and secure clamping Manufactured to ISO dimensions, the ISO WNMG 080408 form guarantees repeatable fitment in holders specified for WNMG inserts. Compatibility is defined by the insert form, clearance (0° rake), tolerance class, fastening method and thickness; the cylindrical hole ensures reliable clamping and accurate seating in compatible external holders and boring bars. The trigon shape and 4.76 mm plate thickness provide the necessary bulk for demanding turning passes, while the 80° wedge angle offers a sound balance between strength and accessibility in shoulder or profile cuts. Selecting the correct holder geometry and clamping arrangement preserves the insert’s mechanical life and maintains cutting accuracy. Optimised chip control and cost-effective machining The ASW chipbreaker is tailored for mixed cutting conditions, promoting predictable chip shapes across a range of feed rates and depths of cut. Effective chip control reduces rework, minimises operator intervention and improves surface finish consistency. The robust grade and chipformer combination lower the frequency of index changes and unplanned stoppages, enhancing throughput and lowering total machining cost per component. For operations seeking process reliability, this insert supports sustained cutting parameters and helps achieve reproducible results across batches. Practical selection and application notes When machining steels with varying alloy content or interrupted engagement, favour the T9225 grade and the ASW chipbreaker for a compromise between wear resistance and toughness. The 0° rake simplifies seat design but requires attention to cutting data; moderate cutting speeds and stable feeds maximise tool life. Wherever improved surface integrity is required, the insert’s geometry and coating contribute to consistent finishes and extended edge retention. For material-specific setup or optimisation, technical consultation is available to match cutting parameters and holder selection to the workpiece and machine dynamics. For application advice or to acquire the WNMG080408-ASW T9225 insert from Tungaloy, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for personalised support and procurement. Technical data Article number: 6780986 SKU: 6780986-Tungaloy Manufacturer SKU: TUN6780986 Manufacturer: Tungaloy Model series: ISO turning inserts Designation: WNMG080408-ASW T9225 Material: Carbide Grade / coating: T9225 Numbers / Core technical data ISO code: 080408 Angle: 80° Thickness: 4.76 mm Corner radius: 0.8 mm Insert size: 08 Rake angle: 0° Manufacturer article number: 6780986 Special features / Design Trigon insert shape Cylindrical hole for secure clamping ASW chipbreaker CVD-coated carbide grade T9225 Designed for turning (external and internal) Suitable for medium-to-heavy steel machining FAQ What cutting applications suit this insert best? This insert, the WNMG080408-ASW T9225 from Tungaloy, is intended for external and internal turning operations on steel components where medium-to-heavy cuts and occasional interruptions occur. How does the ASW chipbreaker affect performance? The ASW chipbreaker on the Tungaloy WNMG080408-ASW promotes controlled chip formation across varying feeds, improving surface finish consistency and reducing manual chip management. Which holder features are required for correct mounting? Correct mounting requires a holder compatible with the ISO WNMG form, matching clearance angle, tolerance class and thickness; the cylindrical hole ensures positive clamping when the holder is specified for holed WNMG inserts. Can this insert be used for stainless or alloyed steels? The T9225 grade is a robust universal grade optimised for steels; for specific stainless or highly alloyed steels, consult cutting data sheets to adapt speeds and feeds for optimal performance with the WNMG080408-ASW insert. What are the key geometry parameters to consider during setup? Key parameters include the 0° rake angle, 0.8 mm corner radius, 80° wedge angle and 4.76 mm plate thickness; these determine cutting stability, edge strength and the achievable surface finish with the Tungaloy insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9225 Wendeplatten - Tungaloy
Combine the CVD‑coated carbide grade T9225 with an ISO‑compliant trigon form and precise 0.8 mm corner radius to achieve stable results in medium‑to‑heavy steel turning; the cylindrical hole and 0° clearance support reliable clamping and repeatable performance. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG080408-TS T9225 — ISO turning insert, CVD‑coated carbide (trigon, 80°) by Tungaloy WNMG080408-TS T9225 is a trigon ISO turning insert designed for medium‑to‑heavy steel machining with a TS chipbreaker for improved chip control CVD-coated carbide grade T9225 for robust performance ISO WNMG insert, trigon form, size 08 0.8 mm corner radius for consistent turning profiles Cylindrical hole and 0° clearance for secure clamping Durable grade for demanding steel turning The combination of a CVD‑coated surface and a tough carbide substrate in grade T9225 delivers extended tool life under varying engagement and interrupted‑cut conditions. The coating reduces wear while the substrate provides the necessary toughness for medium‑to‑heavy steel machining, meaning fewer unplanned tool changes and longer stable cycles. Thermal and mechanical loads are better absorbed with this grade, supporting consistent edge integrity and predictable component quality. Seamless integration with ISO holders for uninterrupted production Compatibility follows ISO parameters—form, clearance angle, tolerance class, fixation, size and thickness—so the trigon WNMG geometry and 80° principal cutting angle sit securely in matching external holders or boring bars. The insert’s cylindrical hole and 0° clearance ensure positive clamping and repeatability; the 4.76 mm thickness provides rigidity for heavier cuts. This standardised interface reduces setup time and makes tool changeovers more straightforward, supporting higher machine uptime and consistent process control. Improved chip control and surface quality for efficient cycles The chipbreaker TS is designed to produce short, controllable chips in a wide range of cutting conditions, which reduces nozzle blockages and enhances swarf evacuation. Better chip control contributes directly to improved surface finish and lower secondary operations, while also lowering the risk of tool damage from tangled chips. Selecting this insert with an appropriate feed and speed strategy yields measurable gains in machining efficiency and part consistency. Practical selection and handling for predictable results When fitting the WNMG080408-TS T9225, ensure the holder matches the ISO WNMG form and that clamping components meet the specified tolerance class for secure seating. For oscillating or interrupted cuts, the robust T9225 grade and the TS chipbreaker offer greater resilience; for continuous finishing, consider adjusting feed to refine the surface. Metav Werkzeuge provides technical guidance to select the correct chipbreaker and holder combination for the intended operation, helping to translate insert properties into tangible productivity improvements. For tailored application advice or to secure genuine Tungaloy WNMG080408-TS inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781251 Manufacturer SKU: TUN6781251 Label / SKU: 6781251-Tungaloy Model series: ISO turning indexable inserts Designation: WNMG080408-TS T9225 Core numerical data Corner radius: 0.8 mm Insert size: 08 Insert thickness: 4.76 mm Principal cutting angle: 80° Clearance angle: 0° Hole: with cylindrical hole Materials and features Material: carbide Coating / grade: CVD-coated, T9225 Chipbreaker: TS Shape: trigon Application: turning; medium to heavy steel machining Compatibility: ISO WNMG series; requires matching holder and clamping FAQ What materials is this insert suitable for? The WNMG080408-TS T9225 insert is specified for medium‑to‑heavy steel machining; the CVD‑coated T9225 grade provides toughness for varying engagement and interrupted cuts. How does the TS chipbreaker affect machining? The chipbreaker TS on this insert promotes short, controllable chips and improved swarf evacuation, which enhances surface finish and reduces downtime caused by chip accumulation. Which holders are compatible with this insert? Compatibility depends on the ISO WNMG form, tolerance class, size and thickness; matching external holders or boring bars designed for WNMG080408 geometry ensure secure clamping and repeatable positioning. What must be considered when clamping the insert? Use the correct clamping screw and seat; the cylindrical hole and specified tolerance class require accurate seating to achieve the repeatability and rigidity intended for heavier cuts. How to choose between finishing and roughing with this grade? For roughing or interrupted cuts, the T9225 grade offers greater resistance to breakage; for finishing, reduce feed or optimise speed while retaining the TS chipbreaker to maintain surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade and the robust chipbreaker AS for stable, predictable turning results; the ISO compatibility of the insert ensures straightforward integration into standard holder systems — order directly via Metav Werkzeuge or request application advice from our consultants. WNMG080408-AS 080408 T9235 — turning insert (trigon, 80°) by Tungaloy The WNMG080408-AS T9235 is an ISO-standard trigon indexable insert intended for external and internal turning, offering a tough, CVD-coated carbide grade suited to interrupted cuts and unstable conditions. ISO-standard indexable insert CVD-coated carbide grade T9235 For stable and interrupted turning Trigon shape with cylindrical hole Greater process reliability through a tough, coated grade The combination of a CVD-coated surface and a tough grade T9235 delivers elevated resistance to chipping under fluctuating cutting conditions, which results in more consistent part quality and fewer unscheduled tool changes. This insert is engineered for steel machining where cuts are often interrupted or where rigidity is limited; the use of a tougher carbide composition favours longevity at lower cutting speeds while maintaining dimensional repeatability. Such material choices translate directly into measurable reductions in machine downtime and rework. Fast integration and secure clamping reduce setup time Designed to the ISO dimensions of its series, the insert’s trigon geometry, cylindrical hole and standard form make compatibility with matched holders straightforward. The insert’s form, relief angle and tolerance class govern fit; because these parameters conform to ISO guidelines, substitution into existing holder inventories is simplified and predictable. The chipbreaker AS is optimised for formation and evacuation of chips in many steel applications, supporting stable cutting forces and reducing the risk of unexpected interruptions during a batch run. Practical robustness for workshop conditions and clear advisory channels Built for real-world turning work, the insert tolerates intermittent engagement and less-than-ideal rigidity without sacrificing surface finish or repeatability. The component’s design supports both external and internal turning operations, offering flexibility across setups. For guidance on matching the insert to a holder, selecting cutting data, or confirming suitability for a specific steel grade, Metav Werkzeuge provides application advice and technical data on request — contact via info@metav-werkzeuge.com or call +49 2822 7131930 for detailed support. For robust turning performance with Tungaloy inserts such as the WNMG080408-AS T9235, contact Metav Werkzeuge for sample availability and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785901 SKU: 6785901-Tungaloy Manufacturer SKU: TUN6785901 Model series: ISO-Drehwendeschneidplatten Material: Carbide Core dimensions Corner radius: 0.8 mm Insert angle: 80° Thickness: 4.76 mm Size: 08 Free angle: 0° Hole: cylindrical Special features ISO-standard indexable turning insert Grade T9235, CVD-coated Chipbreaker AS Trigon shape With cylindrical hole Compatible with ISO holders (form, free angle, tolerance class) Application: external and internal turning Intended for steel, suited to interrupted cuts and unstable conditions FAQ What materials is this insert suited for? The WNMG080408-AS T9235 insert is designed primarily for machining steel; the tough T9235 carbide grade is especially effective in lower-speed, interrupted cutting and in less rigid setups. Which holder types are compatible with this insert? Compatibility is determined by ISO form, relief angle, tolerance class, fastening and insert size; the WNMG080408-AS follows ISO dimensions and therefore fits standard WNMG-compatible external holders and boring bars when matched to the correct clamping system. How is the insert secured in the holder? The trigon insert features a cylindrical hole and is secured using the corresponding clamping set or screw system supplied with the holder; a backing pad and replacement screws are parts of a typical system setup. What cutting conditions does the insert favour? This grade performs best at moderate to lower cutting speeds where toughness is required — it is optimised for interrupted cuts and unstable conditions, prioritising edge life and part consistency over maximum cutting speed. Can the insert be used for internal turning operations? Yes, the geometry and ISO conformity of the insert allow its use in both external and internal turning applications when a suitable holder or boring bar is selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9235 Wendeplatten - Tungaloy
Robust cutting performance and predictable chip control make the WNMG insert a dependable choice for interrupted and unstable turning operations. The CVD-coated cemented carbide T9235 grade offers enhanced toughness for steel machining, while the 0.8 mm corner radius and 4.76 mm plate thickness ensure secure edge strength and repeatable indexability. Order the WNMG080408 T9235 insert directly via Metav Werkzeuge or ask our consultants if needed. WNMG 080408 T9235 — ISO turning insert for turning, CVD-coated, trigon, 80° — Tungaloy The WNMG080408 T9235 is an ISO-standard indexable turning insert designed for external and internal turning where toughness and resistance to interrupted cuts are required. CVD-coated cemented carbide T9235 0.8 mm corner radius, robust edge Trigon shape with cylindrical hole Double-sided chipbreaker, 4.76 mm thick Stable performance where interrupted cuts occur The combination of a CVD-coated surface and cemented carbide substrate gives this grade a balance of wear resistance and fracture toughness. In steel machining at lower cutting speeds or under unstable conditions, the T9235 grade reduces chipping and supports stable chip control, which lowers scrap risk and improves process reliability. This rational advantage translates into higher effective productivity by reducing unplanned tool changes and secondary operations. ISO compatibility and secure clamping for repeatable results Designed to the ISO plate family, the insert’s geometry and dimensions provide predictable fitment to matching holders. The trigon form with a cylindrical hole and the specified 0° clearance require a compatible external holder or boring bar, an appropriate shim and a secure clamping set. Proper matching of form, clearance angle and tolerance class ensures correct seating and consistent repeatability, which is crucial for batch production and reproducible surface finish. Practical guidance on chipformers, radius and application The 0.8 mm radius offers a compromise between edge strength and profile definition: it supports interrupted and wavy cuts while still allowing decent surface quality in finishing passes. The double-sided chipbreaker permits two indexings per cutting edge, improving economy in serial turning. Choose the chipbreaker and cutting data according to workpiece stability and material: the grade is optimised for steel at moderated speeds; for stable setups and higher speeds other grades may be more economical. System-wise, use the insert with a matched holder, shim/clamp and correctly torqued screws to exploit its full potential. For robust steel turning under interrupted conditions, contact Metav Werkzeuge to specify the Tungaloy WNMG080408 T9235 and confirm the correct holder and clamping arrangement — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6785847 Manufacturer SKU: TUN6785847 SKU: 6785847-Tungaloy Label: WNMG080408 T9235 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.8 mm Clearance angle: 0° Plate thickness: 4.76 mm Insert size: 08 Main angle: 80° Hole: with cylindrical hole Special features Grade: T9235, CVD-coated cemented carbide Shape: trigon Double-sided chipbreaker Application: external and internal turning System components: insert, external holder or boring bar, shim/clamp, replacement screws FAQ What materials is this insert best suited for? The T9235 grade is formulated for machining steel, particularly where tougher performance is needed at lower cutting speeds or with interrupted cuts; use the WNMG080408 T9235 insert for such steel applications. Can this insert cope with interrupted or unstable cuts? Yes, the CVD-coated cemented carbide and the 0.8 mm corner radius of the WNMG080408 T9235 support resistance to chipping and maintain edge integrity during interrupted cuts. How many indexings are available per insert edge? The trigon geometry with a double-sided chipbreaker provides multiple usable edges; the chipbreaker design allows two indexings per cutting edge to extend tool life. What must be checked for correct holder compatibility? Match the insert by form, clearance angle (0°), tolerance class, fastening method, size (08) and thickness (4.76 mm) to ensure correct seating and repeatable clamping. Does the insert require a specific chipbreaker selection? Select a chipbreaker and grade according to workpiece material, stability and finishing requirements; the WNMG080408 T9235 is optimised for robust chip control in steel under unstable conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9235 Wendeplatten - Tungaloy
WNMG 080408 T9235 ISO-Drehwendeschneidplatte für Drehen, Hersteller Tungaloy Die WNMG 080408 T9235 ist eine ISO-genormte Trigon-Wendeschneidplatte für Außen- und Innendrehen mit zäher Hartmetallsorte für instabile Bearbeitungsbedingungen ISO-Trigonform für hohe Stabilität beim Drehen CVD-beschichtetes Hartmetall für lange Standzeit Zylindrisches Loch für sichere Befestigung 0,8 mm Eckenradius für feine Konturenschneide Plattendicke 4,76 mm für robuste Spannlage Robuste Schneidstoffauslegung für stabile Spanbildung Die T9235 Sorte ist ein CVD-beschichtetes Hartmetall, das speziell für die Bearbeitung von Stahl ausgelegt ist. Durch die zähe Materialeigenschaft reduziert sich das Risiko von Ausbrüchen bei schwankender Schnittführung, was insbesondere bei unterbrochenem Schnitt und instabilen Spannverhältnissen zu einer längeren Standzeit führt. Diese Eigenschaft sorgt für planbare Prozesskosten und weniger Stillstand. Bewährte Geometrie für einfache Montage und sichere Lage Die Trigon-Plattenform mit zylindrischem Loch und einem Freiwinkel von 0° ermöglicht eine vielseitige Kombination mit gängigen Haltersystemen. Der Winkel von 80° und der Eckenradius von 0,8 mm unterstützen präzise Konturen und einfache Wiederholgenauigkeit beim Plattenwechsel. Durch die Dicke von 4,76 mm entsteht eine stabile Spannlage, die Vibrationen mindert und die Schneidkante schützt. Konkrete Einsatzfelder und Anwendernutzen Vor allem beim Außen- und Innendrehen in Werkstätten und Lohnfertigungen überzeugt diese Sorte in Anwendungen mit unterbrochenem Schnitt oder geringer Stabilität. Der DM Spanbrecher fördert definierte Bruchstücke und reduziert Verwicklungsrisiken bei langen Spänen. Anwender profitieren von weniger Nacharbeit und gleichmäßigeren Oberflächen bei anspruchsvollen Stahlwerkstoffen. Wirtschaftlichkeit durch Systemdenken und Ersatzteilverfügbarkeit Die ISO-Konformität erleichtert die Integration in bestehende Werkzeughalter, Unterlagen und Klemmsätze. Ersatzschrauben und Plattenunterlagen sind im System vorgesehen, sodass Standzeiten optimiert und Rüstzeiten verkürzt werden. Für Werkstätten bedeutet das weniger Maschinenstillstand und bessere Planbarkeit in der Fertigungssteuerung. Für eine effiziente Zerspanung empfehlen wir die T9235-Sorte von Tungaloy; für Anwendungsempfehlungen und Bestellung wenden Sie sich an Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6785849 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080408-DM T9235 Hersteller SKU: TUN6785849 Daten Radius: 0,8 mm Winkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Plattenform: Trigon Loch: zylindrisches Loch Spanbrecher: DM (für definierte Spanformung) Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9235 (zäh, geeignet für Stahl) Systemaufbau: ISO-Drehplatte, Außenhalter/Bohrstange, Unterlage/Klemmsatz, Ersatzschrauben FAQ Welche Werkstoffe lassen sich mit der WNMG080408-DM T9235 bearbeiten? Die WNMG080408-DM T9235 von Tungaloy ist speziell für die Bearbeitung von Stahl ausgelegt; die zähe Sorte reduziert Ausbrüche und eignet sich besonders bei instabilen Schnittbedingungen. Für welche Bearbeitungsarten ist die WNMG080408-DM T9235 vorgesehen? Die Platte ist für Außen- und Innendrehen konzipiert und zeigt ihre Stärken bei unterbrochenem Schnitt sowie bei Anwendungen mit variabler Stabilität. Wie beeinflusst der Spanbrecher DM die Fertigungsqualität? Der DM-Spanbrecher sorgt für kontrollierte Spanzerlegung, vermindert Spanverwicklungen und trägt zu gleichmäßigeren Oberflächen sowie geringerer Maschinenbelastung bei. Ist die WNMG080408-DM T9235 mit Standardhaltern kompatibel? Ja, die ISO-Normierung und die Trigonform ermöglichen die Kombination mit gängigen Außenhaltern und Bohrstangen; auf Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke achten. Welche Vorteile bietet die CVD-Beschichtung der Sorte T9235? Die CVD-Beschichtung erhöht die Verschleißfestigkeit und verbessert die Spanabfuhr, was zu längerem Werkzeugleben und konstanter Prozessqualität führt. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a robust CVD-coated carbide grade, precise ISO compatibility and secure clamping for reliable turning under unstable or interrupted-cut conditions. The toughness of the T9235 grade and the ASW chipbreaker help maintain productivity and reduce tool change frequency. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. WNMG 080408 T9235 ISO turning insert (WNMG080408-ASW) by Tungaloy The WNMG080408-ASW T9235 is an ISO-format turning insert for external and internal turning, offering a tough CVD-coated carbide grade for interrupted cuts and unstable machining conditions. WNMG 080408 insert for ISO turning CVD-coated carbide grade T9235 Trigon shape with 0.8 mm corner radius Cylindrical hole, 4.76 mm plate thickness Reliable cutting under interrupted and unstable conditions The combination of a CVD-coated carbide substrate and the T9235 grade delivers enhanced toughness for turning steel at lower cutting speeds and where interrupted cuts or machine instability occur. The coating supports wear resistance while the substrate prevents brittle failure, so the cutting edge endures shock loads and maintains shape. This results in fewer unexpected interruptions and a more predictable machining cycle, which is particularly valuable in high-variation production environments. Secure clamping and effective chip control for consistent surfaces The ASW chipbreaker is optimised for adaptable chip formation in steel turning, improving evacuation and reducing recutting. The trigon geometry with a 0.8 mm corner radius provides a balance between edge strength and profile control, while the cylindrical hole enables straightforward, repeatable clamping in compatible toolholders. Together these properties produce stable cutting forces and contribute to consistent surface finish and dimensional adherence across batches. ISO conformity that simplifies tool selection and reduces downtime As an ISO-designated insert, compatibility with holders is determined by shape, clearance angle, tolerance class, fixation method, size and thickness, enabling predictable integration into existing systems. The 0° clearance and a plate thickness of 4.76 mm support rigid setups where stiffness is critical. Selecting the correct chipbreaker and grade matching the workpiece and machining stability yields economic benefits through extended tool life and fewer tool changes, supporting steady production flow. For robust turning with proven performance, order Tungaloy WNMG080408-ASW T9235 inserts through Metav Werkzeuge or contact our technical team for tailored selection advice. Technical Data Article number: 6785864 SKU (manufacturer): TUN6785864 SKU: 6785864-Tungaloy Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm ISO designation: 080408 Relief angle: 0° Included hole: cylindrical Included angle: 80° Design & Material Plate form: trigon (WNMG) Chipbreaker: ASW Grade/coating: T9235, CVD-coated carbide Typical application: turning (external and internal) Model series: ISO turning inserts Manufacturer article name: WNMG080408-ASW T9235 FAQ What materials is this insert best suited for? The WNMG080408-ASW T9235 insert is formulated for machining steel, with the T9235 grade providing toughness for interrupted cuts and less stable conditions. Can the insert be used in internal and external turning? Yes, the ISO-format WNMG080408-ASW insert is suitable for both external and internal turning when paired with the correct holder and support accessories. How does the ASW chipbreaker affect machining? The ASW chipbreaker on this insert promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip-related interruptions during turning. Which holder features are necessary for correct compatibility? Compatibility depends on holder form, clearance angle, tolerance class, fixation method, size and plate thickness; the cylindrical hole and trigon shape require a matching clamping system and shim set. What benefits does the T9235 grade provide compared with general-purpose grades? T9235 is a tougher, CVD-coated carbide grade designed to withstand interrupted cuts and unstable machining, offering fewer edge failures and better resistance to mechanical shock. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9235 Wendeplatten - Tungaloy
High machining reliability and stable chip formation are delivered by the CVD-coated carbide grade T9235, combined with the ISO 080408 geometry and a 0° clearance for consistent results in interrupted or unstable turning operations. Order the insert directly via Metav Werkzeuge or consult the Metav Werkzeuge advisers for tailored application support. WNMG 080408 T9235 — ISO trigon turning insert for steel turning (Tungaloy) The WNMG 080408 T9235 is an ISO-standard trigon insert intended for external and internal turning, offering a CVD-coated carbide grade optimised for tough steels and interrupted cuts. CVD-coated carbide grade T9235 for tough steel Trigon shape WNMG, 0.8 mm corner radius ISO 080408 format, 0° clearance, with cylindrical hole Stable chip control with ZM chipbreaker Reliable cutting performance under unstable conditions The combination of a CVD-coated surface and a wear-resistant carbide substrate provides durable cutting edges that resist adhesive wear and edge chipping in demanding operations. The CVD layer increases hardness at the cutting interface while the substrate maintains toughness; this balance makes the insert particularly suitable for tough steel applications where lower cutting speeds or interrupted cuts are common. Specified as grade T9235, the geometry and coating together reduce the frequency of edge failures, supporting steady process flows and predictable tool life. Precise fit and secure mounting for quick changeovers Designed to the ISO 080408 format, the insert’s trigon outline and 0.8 mm corner radius ensure compatibility with a wide range of ISO holders when form, clearance, tolerance class, fastening and thickness are matched. The insert thickness of 4.76 mm and the presence of a cylindrical hole enable secure clamping and repeatable seating, which reduces setup variability and downtime during index changes. Clear reference to ISO sizing simplifies procurement and inventory management while preserving the option to select a holder and clamping kit that match the required rigidity and repeatability. Efficient chip control and consistent surface quality The ZM chipbreaker is configured to manage chip flow in both external and internal turning, promoting short, controllable chips that reduce rework and improve operator safety. In practice, this yields more consistent surface finish and dimension stability even when conditions fluctuate. The grade’s toughness provides tolerance against intermittent cutting forces, so fewer premature edge changes are required. For machining tasks focused on productivity and repeatable results, this insert supports measurable efficiency gains and process reliability. For original Tungaloy turning inserts and application advice contact Metav Werkzeuge: call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the best setup for individual turning tasks and to order the correct items for immediate delivery Technical data Article number: 6786007 SKU: 6786007-Tungaloy Manufacturer SKU: TUN6786007 Model series: ISO turning inserts Material: carbide Core specifications ISO designation: 080408 Insert size: 08 Corner radius: 0.8 mm Insert thickness: 4.76 mm Clearance angle: 0° Insert angle: 80° Hole: with hole Hole style: cylindrical hole Features & suitability Grade/coating: T9235, CVD-coated carbide Chipbreaker: ZM Shape: trigon Application: external and internal turning Best for: tough steel, unstable conditions, interrupted cuts Compatibility note: holder fit depends on form, clearance, tolerance class, fastening, size and thickness FAQ Which materials are suitable for this insert? The WNMG 080408 ZM T9235 insert from Tungaloy is formulated for machining tough steels; its CVD-coated carbide composition prioritises toughness and wear resistance for interrupted cuts and unstable conditions. How does the ZM chipbreaker affect productivity? The ZM chipbreaker on the WNMG 080408-ZM T9235 promotes short, controlled chips, leading to improved surface quality and reduced rework during external and internal turning operations with variable cutting conditions. What mounting features ensure repeatable seating? The trigon insert uses a cylindrical central hole and an ISO 080408 form; combined with the 4.76 mm thickness and standardised geometry, this ensures secure clamping and repeatable index changes when matched to a compatible holder. Is this insert suitable for heavy interrupted cuts? Yes — the T9235 grade and carbide substrate provide the toughness required for more aggressive or interrupted cutting regimes, helping to reduce edge chipping and extend effective tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9235 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T9235 and the 0.8 mm corner radius to achieve stable performance in interrupted and unstable turning conditions; order the WNMG080408-TS T9235 directly via Metav Werkzeuge or ask our consultants if needed. WNMG 080408 T9235 (WNMG080408-TS) — ISO turning insert for external and internal turning, trigon, 80° (Tungaloy) A WNMG080408-TS T9235 indexable insert engineered for robust external and internal turning, combining a CVD-coated carbide grade with a TS chipbreaker for interrupted cuts and unstable set-ups CVD-coated carbide for edge resilience Trigon form for secure clamping 0.8 mm corner radius for robust turning Cylindrical hole for standard mounting Stable cutting where interruptions occur The combination of CVD coating and a tough carbide substrate provides resistance to mechanical and thermal wear, which is particularly important in interrupted turning applications. The T9235 grade is formulated for lower cutting speeds and unstable conditions, promoting consistent cutting performance where chip control and edge life matter. With a TS chipbreaker, the insert helps to form short, controllable chips, reducing the risk of chip entanglement and improving process reliability in mixed production runs. Geometry and grade tuned for productivity A trigon profile with an 80° orientation and a 0.8 mm corner radius delivers a compromise between strength and dimensional control: the larger corner radius increases edge robustness for heavier engagement, while the insert geometry supports repeatable seating and indexing. The 4.76 mm plate thickness contributes to stability in the holder, and the ISO 080408 designation ensures compatibility with standard external holders and boring bars. These design choices reduce downtime by offering predictable wear patterns and straightforward re-indexing. System compatibility and practical handling Integration into a turning system is determined by insert form, relief angle and tolerances; the trigon shape and cylindrical hole permit secure clamping with many ISO-compatible external holders and boring bars. The low relief angle (0°) and the insert’s dimensional match to ISO norms simplify retrofitting into established toolblocks. Spare screws, appropriate clamps and correct seat preparation ensure the insert performs as specified; careful selection of feed and speed, aligned with the T9235 recommendation, maximises tool life and surface finish quality. Contact Metav Werkzeuge for an application review and request the WNMG080408-TS T9235 (SKU TUN6785902) for supply or technical matching to machining tasks Technical data Article number: 6785902 Manufacturer SKU: TUN6785902 SKU: 6785902-Tungaloy Numbers / Core technical data Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 08 Relief angle: 0° Insert angle: 80° Designs / Special features Material: carbide Coating: CVD Chipbreaker: TS Shape: trigon Hole: cylindrical hole Application: turning ISO designation: 080408 Grade: T9235 FAQ What materials is this insert suitable for? The WNMG080408-TS T9235 is a CVD-coated carbide insert designed primarily for turning steel and similar materials under lower cutting speeds and unstable conditions. Can the insert be used for both external and internal turning? Yes, the indexable insert’s trigon form and cylindrical hole make it compatible with many external holders and boring bars for both external and internal turning operations. What does the TS chipbreaker do? The TS chipbreaker on the WNMG080408-TS promotes short, manageable chips to support interrupted cuts and improve process reliability during turning. How does the 0.8 mm corner radius affect machining? A 0.8 mm corner radius increases edge strength, making the insert more tolerant of heavier cuts and transient loading while maintaining acceptable dimensional control. Which ISO designation should be matched when choosing a holder? Select holders and toolblocks that accept the ISO 080408 profile and ensure correct seat geometry and clamp compatibility for secure fixing. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a robust CVD-coated carbide grade and ISO-standard geometry for reliable performance in unstable turning conditions; the insert’s AFW chipbreaker and trigon form ensure secure chip control and consistent results. Order the WNMG080408-AFW T9235 inserts directly via Metav Werkzeuge or consult our specialists for tailored recommendations. WNMG080408-AFW T9235 – WNMG 080408 T9235 ISO turning insert for turning, Tungaloy WNMG080408-AFW T9235 is an ISO-standard trigon insert designed for external and internal turning applications where interrupted cuts or unstable conditions require a tough, wear-resistant grade CVD-coated carbide for tough steel operations ISO WNMG 080408 trigon insert geometry AFW chipbreaker for interrupted cuts Compatible with ISO turning toolholders Consistent tool life through CVD-coated carbide and T9235 grade The combination of a CVD-coated carbide substrate and the T9235 grade provides a balance between toughness and wear resistance specifically aimed at machining steel under conservative cutting speeds. The coating enhances surface hardness and reduces adhesion, while the base carbide resists mechanical shock during interrupted cuts. As a result, this configuration promotes stable chip formation and extended edge life, reducing the frequency of index changes and keeping cycle times predictable in mixed-production environments. ISO conformity and straightforward holder compatibility Manufactured to the ISO turning insert family, the trigon WNMG geometry and defined dimensions simplify tool selection and replacement in standard toolholders. Compatibility with a holder depends on form, clearance angle, tolerance class, fastening method, size and thickness; the 0° clearance and the trigon form make the insert suitable for many common external and internal tool holders. The standardised design supports fast set-up, repeatable seating and consistent cutting angles, which helps machining centres and job shops maintain process stability across different machines and operators. Optimal chip control and recommended use cases The integrated AFW chipbreaker is intended for interrupted and unstable cutting scenarios, providing reliable chip segmentation and evacuation when machining steel. This insert performs particularly well for roughing passes and applications where the cut may vary due to workpiece clamping or part geometry. For best results, pair the insert with a suitable outer holder or boring bar, choose cutting parameters mindful of the T9235’s preference for moderate speeds, and ensure secure clamping to exploit the grade’s toughness without over-stressing the cutting edge. For specific cutting data, availability and delivery of the Tungaloy WNMG080408-AFW T9235 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, application-oriented advice and supply. Technical data Manufacturer article number: 6785862 SKU: 6785862-Tungaloy Manufacturer SKU: TUN6785862 Model series: ISO turning inserts Manufacturer: Tungaloy Key measurements Corner radius: 0.8 mm Insert size: 08 Plate thickness: 4.76 mm Lead angle: 80° Clearance angle: 0° Design and special features Geometry: trigon (WNMG) Chipbreaker: AFW Grade/coating: T9235, CVD-coated carbide Hole: with cylindrical hole Application: turning (external and internal) Typical use: interrupted cuts, unstable conditions FAQ What materials is this insert suited for? The WNMG080408-AFW T9235 insert is geared towards machining steel; the T9235 grade and CVD-coated carbide composition favour toughness in lower-speed, unstable or interrupted cutting conditions. How does the AFW chipbreaker affect performance? The AFW chipbreaker on the WNMG080408-AFW promotes chip segmentation and stable evacuation, improving process reliability during interrupted cuts and reducing the risk of chip-related surface issues when turning steel. Is this insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions for WNMG geometry; compatibility with a specific holder is determined by form, fastening, tolerance class, size and thickness, so standard ISO turning toolholders that accept WNMG inserts are generally suitable. What cutting conditions suit the T9235 grade best? T9235 is a tough, CVD-coated carbide grade designed for moderate cutting speeds and unstable conditions. It is particularly recommended for roughing and interrupted operations where mechanical shock resistance is essential. Which spare parts and components are needed for the system? A complete system typically comprises the ISO insert, a matching external holder or boring bar, a support shim/clamp set and replacement screws to secure the insert; selection should follow holder manufacturer specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9235 Wendeplatten - Tungaloy
WNMG 080408 T9235 Wendeplatte für Drehen von Tungaloy Die WNMG 080408 T9235 ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen und bietet robuste Zerspanungslösungen bei instabilen Bedingungen WNMG080408-ZF von Tungaloy CVD-beschichtetes Hartmetall T9235 Trigonform mit 0° Freiwinkel Radius 0,8 mm für feine Konturen Mit zylindrischem Loch und 4,76 mm Dicke Hohe Prozesssicherheit auch bei instabilen Schnitten Die WNMG080408-ZF kombiniert CVD-Beschichtung mit einem zähen Hartmetall, sodass die Platte insbesondere bei niedrigen Schnittgeschwindigkeiten und unterbrochenem Schnitt zuverlässige Ergebnisse liefert. Durch die Trigonform und den 0° Freiwinkel bleibt die Schneide stabil, was die Vibrationsanfälligkeit reduziert und die Werkstückqualität sichert. Anwender profitieren von konstanter Spanbildung und vorhersehbarer Werkzeugstandzeit. Material und Beschichtung: Vorteil für Stahlbearbeitung Die Sorte T9235 ist speziell auf zähe Stähle ausgelegt und bietet durch die Beschichtungsstruktur eine verbesserte Verschleißfestigkeit. Die Kombination aus Substrat und Beschichtung ermöglicht längere Schneidkantenstandzeiten bei anspruchsvollen Schnittbedingungen. Dadurch reduziert sich Stillstandzeit in der Produktion und die Gesamtproduktivität steigt ohne komplexe Prozessanpassungen. Passgenauigkeit, Anwendungsempfehlung und Systemintegration Die Kompatibilität der Wendeplatte richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; daher empfiehlt sich vor der Montage ein Abgleich mit dem vorhandenen Außenhalter oder der Bohrstange. Bei instabiler Aufspannung oder stark unterbrochenem Schnitt empfiehlt sich die Wahl stabiler Halter sowie die Anpassung von Vorschub und Schnitttiefe, um die Vorteile der T9235 vollständig auszuschöpfen. Für produktive Zerspanung empfehlen wir die Verwendung der WNMG080408-ZF T9235 von Tungaloy; bei Fragen zu Eignung oder Bestückung steht Metav Werkzeuge gern zur Verfügung – 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 Produktmerkmale Artikelnummer: 6786006 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080408-ZF T9235 Hersteller-SKU: TUN6786006 Fakten Eckenradius: 0,8 mm Plattendicke: 4,76 mm Winkel: 80° Größe: 08 Besonderheiten Material: Hartmetall Schneidstofftyp: CVD-beschichtetes Hartmetall Sorte: T9235 Plattenform: Trigon Freiwinkel: 0° Spanbrecher: ZF Loch: mit Loch (zylindrisches Loch) Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Welche Werkstoffe sind für die WNMG080408-ZF T9235 besonders geeignet? Die WNMG080408-ZF T9235 von Tungaloy wurde für zähe Stähle entwickelt; die CVD-Beschichtung und das Substrat sorgen für stabile Spanbildung und lange Standzeit bei Stahlbearbeitung. Wie stelle ich die Kompatibilität mit meinem Werkzeughalter sicher? Kompatibilität ergibt sich aus Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke. Prüfen Sie diese Parameter am vorhandenen Außenhalter und vergleichen Sie sie mit den Angaben der WNMG080408-ZF. Welche Vorteile bietet die Trigonform der Platte? Die Trigonform erlaubt drei nutzbare Schneidkanten pro Platte und erhöht damit die Wirtschaftlichkeit. Zudem verbessert die Form die Stabilität bei tangentialen Schnitten. Ist die Sorte T9235 für instabile Bearbeitungsbedingungen geeignet? Ja, die Sorte T9235 ist speziell für niedrigere Schnittgeschwindigkeiten und instabile Bedingungen ausgelegt und vermindert Bruchrisiken bei unterbrochenem Schnitt. Welche Bedeutung hat der Radius 0,8 mm für die Bearbeitung? Der Radius 0,8 mm ermöglicht feinere Konturierung bei gleichzeitiger Reduktion von Kerbwirkung; er ist ideal, wenn präzise Kantenbilder bei stabilen Schnittbedingungen gefragt sind. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of a tough CVD-coated carbide grade, stable chip control and ISO compatibility for reliable turning results; order the insert directly via Metav Werkzeuge or consult the technical team for grade and holder matching. WNMG 080408 T9235 — WNMG 080408 turning insert for steel turning (Tungaloy) The WNMG080408-TM T9235 is an ISO-standard indexable insert designed for external and internal turning, providing a tough, CVD-coated carbide grade and a TM chipbreaker for interrupted and unstable cutting conditions. CVD-coated carbide grade T9235 For steel: interrupted and unstable cuts ISO WNMG 080408 trigon insert, 80° cutting angle 0.8 mm corner radius for versatile turning Cylindrical-hole fixing, 4.76 mm thickness Consistent cutting under unstable conditions The combination of a CVD-coated carbide substrate and the T9235 toughness rating delivers controlled wear behaviour when machining steel at moderate cutting speeds. This composition is selected to maintain a stable cutting edge during interrupted cuts and less rigid set-ups, reducing edge chipping and unexpected tool changes. By favouring toughness over maximum hardness, longevity is improved in applications where vibrations or part spring-back are present, which supports a more predictable production flow and fewer unscheduled interventions. Improved chip control through optimised geometry The TM chipbreaker and trigon geometry (WNMG) concentrate chip flow and reduce the risk of long stringy chips on steel. The 80° cutting angle combined with a 0.8 mm corner radius moderates engagement, enabling a balance between strength of the cutting edge and surface finish. In practice, the chipbreaker design channels chips away from the cutting zone, lowering heat concentration and assisting in efficient chip evacuation even during interrupted cuts. Compatibility with ISO holders ensures secure clamping and repeatable positioning for consistent results. Seamless integration into ISO turning systems As an ISO-form insert, this grade integrates with standard external holders, boring bars and clamping kits; mounting is achieved via a cylindrical hole and the corresponding screws and underlay. The standardised form, free angle and thickness simplify replacement and inventory management across mixed fleets. Choosing the correct holder geometry and tolerance class is essential for optimal performance; matching the insert form, free angle and clamping system yields the intended cutting angles and repeatability during tool changes. Target applications and user guidance Engineered primarily for steel machining, the insert excels when lower cutting speeds and robust edge strength are required—typical in unstable setups or interrupted turning cycles. The product is not designed for extreme high-speed finishing where ultra-hard grades would be preferable; instead, it targets productive material removal with reliable edge life. For selection guidance, consider the workpiece clamping rigidity, depth of cut and expected interruption frequency to pick the correct chipbreaker and grade pairing for each operation. Contact Metav Werkzeuge for tailored grade and holder recommendations for the WNMG 080408 T9235; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability Technical data Article number: 6785799 Manufacturer SKU: TUN6785799 SKU: 6785799-Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 0.8 mm Plate thickness: 4.76 mm Cutting angle: 80° ISO code: 080408 Plate size: 08 Special features CVD-coated carbide grade T9235 TM chipbreaker for interrupted cuts Trigon insert form (WNMG) Cylindrical-hole fixing Suitable for external and internal turning of steel ISO-standardised compatibility with holders FAQ What materials is this insert intended for? The WNMG080408-TM T9235 (SKU: 6785799-Tungaloy) is optimised for machining steel, particularly where toughness and resistance to chipping under interrupted or unstable cutting conditions are required. How does the TM chipbreaker affect performance? The TM chipbreaker on this indexable insert directs and breaks chips effectively during turning, improving evacuation and reducing heat concentration, which benefits tool life and surface integrity when machining steel. Which holders are compatible with this insert? Compatibility is determined by ISO form, free angle, tolerance class, fixing method and plate size; the trigon WNMG form fits standard ISO external turning holders and boring bars designed for WNMG inserts. Is this grade suitable for high-speed finishing? The T9235 grade is formulated for toughness at lower to moderate cutting speeds and is therefore not optimised for ultra-high-speed finishing operations where harder, less tough grades would be preferable. What is the correct way to secure the insert? The insert is secured via its cylindrical hole using the matching screw, underlay and clamp kit specified for the holder; correct clamping torque and clean contact surfaces ensure repeatable positioning and safe operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 T9235 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated carbide grade T9235 and the THS chipbreaker for stable chip control in interrupted or unstable turning operations; the trigon WNMG080408‑THS delivers repeatable results and long cutting life. Order this turning insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG 080408 T9235 — Turning insert (trigon), CVD‑coated carbide, Tungaloy The WNMG080408‑THS T9235 is a trigon indexable insert for external and internal turning that delivers robust performance in unstable cutting conditions and at lower cutting speeds CVD‑coated carbide grade T9235 Trigon insert, size 08, 0.8 mm corner radius Cylindrical central hole for secure clamping Chipbreaker THS for interrupted cuts Reliable performance where stability is limited The combination of CVD‑coating and a tough carbide substrate provides a wear‑resistant cutting edge suited to lower cutting speeds and interrupted cuts. The T9235 grade is formulated to maintain edge integrity under fluctuating forces, which reduces unexpected tool changeovers and supports a more predictable production rhythm. For shops facing variable clamping or part set‑up, this behaviour translates directly into improved process uptime and consistent component quality. Designed for secure mounting and broad holder compatibility The trigon geometry with a cylindrical central hole and standard ISO form ensures reliable location and clamping in most external holders and boring bars. The 0° clearance specification and the 80° included angle are factors in achieving stable contact and reduced vibration when the tool is properly supported. The 0.8 mm corner radius balances strength and edge definition, making the insert adaptable to finishing and light roughing where tool life and surface integrity matter. Practical benefits from chip control and material choice The integrated THS chipbreaker is optimised for chip formation during interrupted turning of steel, promoting safe evacuation and minimising rework risk. Using a carbide insert with a CVD coating combines toughness with thermal and abrasive resistance, extending intervals between indexings. This results in lower machining overheads and improved productivity — a rational choice for turning operations that demand reliability under less-than-ideal conditions. Compatibility, handling and application guidance The insert conforms to the ISO turning insert system and fits holders that match the form, clearance angle, tolerance class, fixing method, size and thickness. The system typically comprises the indexable insert, a matching external holder or boring bar, backing/locator pads and replacement screws. Selecting the correct chipbreaker and grade for the workpiece material and machining stability will optimise results and tool lifetime. For dependable turning with Tungaloy’s T9235 grade, contact Metav Werkzeuge to order the WNMG080408‑THS or request tailored application advice from our specialists via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6786051 Manufacturer SKU: TUN6786051 Manufacturer: Tungaloy Model series: ISO‑turning indexable inserts Application: Turning Facts Size designation: 08 ISO code: 080408 Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Included angle: 80° Hole: with hole Special features Material: carbide Coating: CVD‑coated Grade: T9235 Chipbreaker: THS Plate form: trigon Hole style: cylindrical central hole ISO designation: WNMG080408‑THS Suitable for: external and internal turning FAQ What materials is this insert best suited to machine? The WNMG080408‑THS T9235 is formulated for machining steel and performs well in interrupted or unstable conditions where a tougher grade is required. How does the THS chipbreaker affect machining results? The THS chipbreaker promotes controlled chip formation during interrupted cuts, improving evacuation and reducing the risk of recutting or surface damage when using the insert. Is this insert compatible with standard ISO holders? Yes, the insert follows ISO geometry; compatibility depends on matching form, clearance angle, tolerance class, fixing method, size and thickness with the chosen holder. What advantages does the CVD coating bring? The CVD‑coating enhances abrasive and thermal resistance while the carbide core provides toughness, yielding a balance suited to lower speeds and variable cutting conditions with the T9235 grade. Which identifier should be used when ordering replacements? Order using article number 6786051 or manufacturer SKU TUN6786051 to ensure the correct WNMG080408‑THS T9235 insert is supplied. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
WNMG 080408 T9235 Wendeplatten - Tungaloy
WNMG 080408 T9235 – Drehwendeschneidplatte zum Drehen | Tungaloy Die WNMG080408-TH T9235 ist eine ISO-genormte Trigon Drehwendeschneidplatte, ausgelegt für Außen- und Innendrehen von Stahl unter instabilen Schnittbedingungen ISO-genormt Trigonform für Standardhalter CVD-beschichtetes Hartmetall für zähe Schnitte Speziell für Stahl bei niedriger Schnittgeschwindigkeit 0,8 mm Eckenradius für erhöhte Schneidkantensicherheit Zylindrisches Loch und 4,76 mm Plattendicke Hohe Standfestigkeit durch CVD-beschichtung und Hartmetall Die CVD-beschichtetes Hartmetall-Kombination der Platte sorgt für Zähigkeit und verlässliche Verschleißfestigkeit bei geringerer Schnittgeschwindigkeit. Die Beschichtung reduziert Aneinanderhaften und erhöht die Standzeit besonders bei unterbrochenem Schnitt, sodass Rüstintervalle und Werkzeugwechsel seltener nötig sind. Dadurch lässt sich die Produktivität in instabilen Bearbeitungssituationen verbessern ISO-Konformität und einfache Halterauswahl sparen Rüstzeit Als ISO-genormtes Plattensystem ist die Platte schnell einem passenden Außenhalter oder einer Bohrstange zuzuordnen. Form, Freiwinkel 0°, Toleranzklasse, Befestigung, Größe und Dicke bestimmen die Kompatibilität; dadurch wird die Auswahl zur Planungsaufgabe statt zur Unsicherheit. Wer Platten und Halter systematisch zusammenstellt, minimiert Stillstandszeit und erhöht die Prozesssicherheit Geometrie und Spanformung für instabile Schnitte Der Eckenradius 0,8 mm in Kombination mit dem Spanbrecher TH bietet stabile Spanbildung auch bei stärkeren Schnittunterbrechungen. Die Trigonform erhöht die Stabilität der Schneidkante und erlaubt kompaktere Werkzeugsysteme. Das Ergebnis ist weniger Schneidkantenbruch und eine konstantere Oberflächengüte bei Stahlbearbeitung Zielgruppe, Anwendungsempfehlung und kurze Begriffserklärung Verarbeitet in Werkstätten und Auftragsfertigung liefert die Platte robuste Ergebnisse beim Drehen von Stahl, wenn Stabilität und Standzeit Priorität haben. Für instabilen Schnitt empfiehlt sich die Wahl von zäheren Sorten wie T9235. CVD steht für chemische Gasphasenabscheidung und beschreibt die harte, haftungsarme Beschichtung. Bei Unsicherheit zur Halterkompatibilität empfiehlt sich die Abstimmung mit der Fertigungsplanung Empfehlung: Die WNMG080408-TH T9235 von Tungaloy eignet sich besonders für zähe Stahlbearbeitung unter instabilen Bedingungen; bei Fragen zur Passgenauigkeit oder Anwendung kontaktieren Sie bitte info@metav-werkzeuge.com oder telefonisch +49 2822 7131930. Produktmerkmale Artikelnummer: 6785851 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6785851 Bezeichnung: WNMG080408-TH Daten Eckenradius: 0,8 mm Winkel: 80° Frei Winkel: 0° Plattendicke: 4,76 mm Plattengröße: 08 Besonderheiten Material: Hartmetall Sorte/Beschichtung: T9235 Schneidstofftyp: CVD-beschichtetes Hartmetall (CVD = chemische Gasphasenabscheidung) Plattenform: Trigon Spanbrecher: TH Lochstil: zylindrisches Loch Einsatzgebiet: Drehen ISO-genormt FAQ Welche Werkstoffe sind mit dieser Platte am besten zu bearbeiten? Die WNMG080408-TH T9235 von Tungaloy ist besonders für die Bearbeitung von Stahl geeignet, speziell bei niedriger Schnittgeschwindigkeit und instabilen Schnittbedingungen. Für andere Werkstoffe sollte die Sortenwahl angepasst werden Wie beeinflusst der Eckenradius die Bearbeitung? Der Eckenradius 0,8 mm erhöht die Schneidkantensicherheit und verringert die Bruchneigung bei unterbrochenen Schnitten, was die Standzeit bei Stahlbearbeitung deutlich verbessert Worauf ist bei der Halterauswahl zu achten? Kompatibilität hängt von Form, Frei Winkel 0°, Toleranzklasse, Befestigungsart, Größe und Dicke ab. Für die WNMG080408-TH empfiehlt sich ein passender Trigon-Außenhalter mit entsprechendem Klemmmechanismus Welche Vorteile bietet die CVD-Beschichtung konkret? Die CVD-beschichtung sorgt für bessere Verschleißfestigkeit und geringere Haftneigung bei Stahl, sodass die Schneidkante stabiler bleibt und Werkzeuge seltener gewechselt werden müssen Ist die Platte für Innen- und Außenbearbeitung geeignet? Ja, die ISO-genormte Geometrie der WNMG080408-TH erlaubt sowohl Außen- als auch Innendrehen, die Auswahl des Spanbrechers und der Sorte erfolgt nach Werkstoff und Bearbeitungsbedingungen Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
WNMG 080408 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO-standard trigon geometry and the sharp TH10 uncoated carbide grade for precise external and internal turning; the combination of a 0.8 mm corner radius and 0° clearance supports low cutting forces and clean surface finishes. Order Tungaloy WNMG080408-33 TH10 inserts via Metav Werkzeuge or consult our specialists for holder compatibility and grade selection. WNMG080408 TH10 trigon indexable insert for Turning — Tungaloy The WNMG080408-33 TH10 is an ISO-standard trigon indexable insert designed for external and internal turning, offering a sharp universal grade for non-ferrous materials and situations that benefit from an uncoated cutting edge. ISO standard WNMG 080408 insert Uncoated carbide TH10 for non-ferrous Trigon shape with cylindrical hole 0.8 mm corner radius, 0° clearance Accurate fit and why ISO compatibility matters The ISO designation ensures predictable mounting and replacement: form, clearance angle, tolerance class, fastening, size and thickness determine holder compatibility. For this insert, the trigon outline and the cylindrical centre hole provide a stable seat in matching clamping systems; the specified plate thickness 4.76 mm and the ISO code 080408 must match the toolholder. For production planning, compatibility is best verified by comparing these parameters with the chosen holder specification. This reduces downtime through reliable indexing and repeatable positioning, especially in batch runs where consistent geometry is essential. Grade behaviour and machining advantages The TH10 grade is an uncoated carbide characterised by a sharp, universal cutting edge that lowers cutting forces and produces a clean surface finish on non-ferrous materials. Uncoated grades are particularly suitable where low friction and minimal built-up edge are priorities; they often perform well in softer alloys and in operations where coating thickness could blunt the edge. The chipbreaker 33 guides chips away from the cutting zone to support process stability, while the 0.8 mm corner radius strikes a balance between edge strength and surface quality — a modest radius that maintains a fine finish without compromising durability. These attributes translate into efficient turning where tool life and part integrity must be balanced. System integration, handling and application notes Integration into a turning system involves more than the insert itself: a matching external holder or boring bar, a suitable shim or clamp, and correct clamping screws form the complete system. The WNMG080408-33 TH10 insert is intended for both external and internal turning; selection of the chipbreaker and grade should be aligned with workpiece material and machining stability. The specified 0° clearance angle means the insert edge geometry must be considered when setting lead angles and approach paths to avoid rubbing. For less experienced users, a conservative feed and speed setting is recommended initially, then optimised based on surface finish and vibration behaviour. Proper storage and handling of the inserts will preserve the sharp uncoated edge and ensure consistent performance across multiple indexings. For tailored advice on selecting the correct holder, clamping set and insertion practice for Tungaloy indexable inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our technical team provides specific support for grade and holder compatibility to ensure productive machining. Technical data Article number: 6809694 SKU: 6809694-Tungaloy Manufacturer SKU: TUN6809694 Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Article name: WNMG080408-33 TH10 Facts ISO code: 080408 Insert size: 08 Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 0° Insert angle: 80° Chipbreaker: 33 Special features Shape: trigon Hole: cylindrical hole Grade: TH10 (uncoated carbide) Material: carbide Application: external and internal turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness System: ISO indexable insert with matching holder, shim/clamp and screws FAQ What materials is this insert intended for? The WNMG080408-33 TH10 insert is designed primarily for non-ferrous materials and applications where an uncoated carbide edge supports low cutting forces and a clean surface finish. How does the chipbreaker 33 affect machining? Chipbreaker 33 controls chip formation and evacuation to promote stable cutting; in the WNMG080408-33 TH10 the breaker supports predictable chip flow and reduces the risk of chip re-cutting. Is the insert compatible with standard ISO WNMG holders? Compatibility requires a holder that matches the insert’s ISO code 080408, form, thickness (4.76 mm), hole style and tolerance class; matching these parameters ensures secure clamping and correct seating. What does the 0° clearance angle mean in practice? A 0° clearance angle indicates the specified relief behind the cutting edge; machining setups should account for this when selecting tool approach angles to avoid rubbing and to achieve the intended cutting geometry. How many times can the insert be indexed? Indexing frequency depends on wear and the chosen operating parameters; the trigon shape and cylindrical hole facilitate secure indexing, but actual reuse depends on observed edge condition and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080408 TH10 Wendeplatten - Tungaloy
Reliable performance with a sharp, uncoated carbide grade and a 0.8 mm corner radius ensures low cutting forces and clean surfaces; the double-sided chipbreaker and ISO geometry support cost‑efficient, repeatable turning operations. Order the insert directly via Metav Werkzeuge or contact our consultants for selection support. WNMG 080408 TH10 — Trigon turning insert (80°) by Tungaloy WNMG080408 TH10 is an ISO‑standard trigon indexable insert for external and internal turning, offering a sharp, uncoated grade optimised for non‑ferrous materials and applications where low cutting forces are required ISO‑standard indexable geometry Sharp uncoated TH10 carbide grade 0.8 mm corner radius for fine finish Double‑sided chipbreaker, cylindrical hole Consistent low cutting forces and improved surface quality The combination of a sharp uncoated carbide edge and the TH10 grade delivers reduced cutting forces and a clean surface on non‑ferrous materials and similar applications. An uncoated cutting edge can lower friction and reduce built‑up edge formation, which translates into steadier cutting conditions and fewer rework cycles. These properties are particularly beneficial where minimal cutting resistance and good surface integrity are decisive performance factors. Straightforward integration with ISO holders and predictable clamping Designed to the ISO turning insert standard, the trigon shape and cylindrical hole make mounting straightforward in compatible external holders and boring bars. Compatibility depends on form, clearance angle, tolerance class, fastening and thickness; the 80° included angle and 0° clearance specification support stable seating and reproducible positioning. This predictability simplifies tool setup, reduces changeover time and helps maintain consistent geometry across production runs. Small radius for finer edge control and dimensional accuracy The 0.8 mm corner radius provides a balance between edge strength and the ability to generate fine surface finishes. A modest corner radius reduces the tendency to form large burrs and allows for tighter tolerances on turned features. For precision turning tasks where edge control influences repeatability, this geometry helps preserve dimensional accuracy while maintaining acceptable tool life. Robust part handling thanks to double‑sided geometry and chip control A double‑sided chipbreaker increases insert usage economy by allowing indexable reuse, while the chipbreaker design supports manageable chip formation in many turning operations. The trigon format and the cylindrical hole ensure central clamping stability; together these features reduce vibration and help secure a reliable cutting edge during both external and internal turning cycles. Choose the Tungaloy WNMG080408 TH10 through Metav Werkzeuge for consistent, efficient turning performance and contact our technical advisers at Metav Werkzeuge for application guidance Technical data Article number: 6809675 SKU: 6809675-Tungaloy Manufacturer SKU: TUN6809675 Label: WNMG080408 TH10 Model series: ISO‑Drehwendeschneidplatten Material: carbide Numbers / Core technical data Corner radius: 0.8 mm Included angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm ISO code: 080408 Size designation: 08 Designs / Special features Trigon plate form Double‑sided chipbreaker Cylindrical hole (with hole) Uncoated cemented carbide Grade TH10 Intended use: turning (external and internal) ISO‑standard insert FAQ Which materials are best processed with this insert? The WNMG080408 TH10 insert uses the TH10 uncoated carbide grade and is intended primarily for non‑ferrous materials and applications where a sharp edge and low cutting forces produce the best surface quality. What are the key geometric specifications of the insert? This trigon, 80° insert has a 0.8 mm corner radius, a plate thickness of 4.76 mm and a 0° clearance angle; the ISO designation is 080408 (manufacturer SKU TUN6809675). Is the cutting edge coated? No, the WNMG080408 TH10 is an uncoated cemented carbide insert; the uncoated edge supports lower cutting forces and cleaner finishes in suitable applications. Can the insert be indexed to extend usage? Yes, the double‑sided chipbreaker geometry allows indexing to the second cutting edge, improving usage economy and reducing tooling costs per edge. How is compatibility with holders ensured? Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; the ISO‑standard geometry of this trigon insert simplifies selection of a matching external holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 AH110 Wendeplatten - Tungaloy
Take advantage of a wear‑resistant, PVD‑coated carbide grade that combines a sharp cutting edge with reliable process security; the trigon geometry and 1.2 mm corner radius provide robustness for heavy section cuts while the ISO format ensures predictable compatibility with standard holders — order directly via Metav Werkzeuge or consult our specialists for application advice. WNMG080412 AH110 – ISO turning insert, PVD‑coated carbide, Tungaloy WNMG080412 AH110 is an ISO‑standard trigon indexable insert for external and internal turning, designed with a double‑sided chipbreaker and PVD coating to deliver consistent wear performance in production environments. PVD-coated carbide grade AH110 Trigon shape, 80° cutting angle Double-sided chipbreaker 1.2 mm corner radius Consistent cutting performance for efficient turning The PVD coating on this carbide grade provides a controlled surface hardness and reduced friction, resulting in wear resistance and prolonged edge life under continuous operation. The combination of a sharp cutting geometry and a robust substrate reduces the need for frequent index changes, supporting higher uptime and predictable cycle times. For production turning, this translates into fewer interruptions and improved overall efficiency without sacrificing surface quality. Seamless integration into standard tool systems Compatibility is governed by the insert form, 0° relief angle, tolerance class, attachment method, size and thickness. The ISO format of this trigon insert ensures straightforward matching with appropriate external holders or boring bars when the holder supports a trigon plate and the correct clamp or screw set. The defined 4.76 mm plate thickness and the cylindrical hole style allow secure fastening and repeatable seating, which shortens setup time and reduces variation between indexed positions. Geometry tuned for robust cutting and surface results The 80° cutting configuration delivers a balance between edge strength and accessibility for shoulder and profile turning; its 1.2 mm corner radius increases resistance to chipping on interrupted cuts and heavy depths of cut, while still permitting respectable surface finish when feeds are controlled. The double-sided chipbreaker offers two indexing positions per side, enabling economical use of the cutting edges and steady chip control across a range of turning operations. Where this grade excels in production This PVD‑coated AH110 grade is intended where a sharp cutting edge and process security are both required — for example, medium to general‑purpose steel turning where stable edge retention is essential. The insert’s ISO conformity and straightforward system setup (insert + matching holder, underlay/clamp set and replacement screws) make it suitable for CNC workshops seeking reproducible results and minimal tool management overhead. Select the chipbreaker and grade to match workpiece material and machining stability for optimal performance. For reliable process security with Tungaloy AH110, contact Metav Werkzeuge for application guidance and availability — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6809745 Manufacturer SKU: TUN6809745 Label: WNMG080412 AH110 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Core data Corner radius: 1.2 mm Cutting angle: 80° Relief angle: 0° Plate thickness: 4.76 mm Size: 08 Hole: cylindrical Special features PVD‑coated cemented carbide (AH110) Trigon plate, double‑sided chipbreaker ISO‑standard indexable turning insert Application: turning (external and internal) Compatible with matching holders, underlay/clamp set and screws Wear‑ and chip‑resistant grade for process security FAQ Which toolholders fit this trigon insert? The WNMG080412 AH110 insert fits ISO trigon toolholders designed for size 08 plates with a cylindrical hole; compatibility depends on the holder’s seat form, clamp and tolerance class. For which materials is this grade suitable? The AH110 PVD‑coated carbide grade is intended for general turning where a sharp edge and high process security are required, typically covering a broad range of steels and comparable alloys. How many cutting edges are available per insert? With a double‑sided chipbreaker and trigon form, the insert provides multiple usable cutting edges; the exact count depends on the indexing pattern of the plate. Does the insert require a specific relief angle in the holder? The plate is specified with a 0° relief angle; ensure the chosen holder seat and geometry match this specification to achieve correct clearance and seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 AH120 Wendeplatten - Tungaloy
High process security and reliable edge life make this insert a productive choice for demanding turning operations. Combine the AH120 PVD-coated carbide grade with trigon geometry and a 1.2 mm corner radius for consistent chip control and surface finish. Order the WNMG080412-TH AH120 directly via Metav Werkzeuge or ask the consultants for application advice. WNMG080412-TH AH120 — Tungaloy ISO turning insert, trigon, PVD-coated The WNMG080412-TH AH120 is an ISO trigon turning insert for external and internal turning, providing a wear-resistant PVD-coated carbide grade for process-secure machining. PVD-coated carbide AH120 for durability Trigon form for versatile turning operations 1.2 mm corner radius for robust cutting edge Cylindrical hole and 0° clearance angle Improve throughput with stable edge performance The trigon geometry combined with the AH120 PVD coating delivers a dependable cutting edge that maintains form under intermittent and continuous cuts. The grade is formulated to be wear- and chipping-resistant, which reduces unplanned tool changes and contributes to predictable cycle times. For shops aiming to raise output without sacrificing surface quality, the combination of PVD coating and a robust carbide substrate helps ensure repeatable results across batches. Simplified integration into ISO-standard tool systems Compatibility is determined by the insert’s form, clearance angle, tolerance class, fixation, size and thickness; the insert is built to fit ISO-standard holders when those parameters match. The trigon shape and the central cylindrical hole enable secure clamping on a range of external holders and boring bars, while the 0° clearance angle suits many general turning set-ups. Because the system comprises the insert, a matching external holder or boring bar, and the necessary clamping components, tool change procedures remain straightforward and efficient. Reliable chip control and surface quality for finishing and roughing The TH chipbreaker is designed to work with the AH120 grade to manage chip formation across varied steels and cast materials. The 1.2 mm corner radius supports stable cutting in heavier passes while still allowing for acceptable surface finish in finishing cuts. For engineers less familiar with insert metallurgy: PVD coating creates a hard, thin surface layer that increases wear resistance without sacrificing toughness, so the insert combines durability with a sharp initial cutting edge for consistent surface outcomes. Discuss application-specific options with Metav Werkzeuge and specify the AH120 grade for process-secure turning; Metav Werkzeuge can advise on holder compatibility and recommended cutting parameters Technical data Article number: 6812212 SKU: 6812212-Tungaloy Manufacturer item number: 6812212 Model series: ISO-Drehwendeschneidplatten Material: carbide Facts ISO designation: 080412 Size: 08 Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Included angle: 80° Special features Grade: AH120 (PVD-coated cemented carbide) Chipbreaker: TH Plate form: trigon Hole: with hole Hole style: cylindrical hole Application: turning (external and internal) Compatible with ISO-standard holders when form, clearance, tolerance, fixation, size and thickness match FAQ What materials is this insert suitable for? The AH120 grade and TH chipbreaker make the insert suitable for a broad range of materials, including steels and cast materials; the combination is tuned for wear resistance and edge stability in turning operations. How does the PVD coating benefit performance? The PVD coating on the AH120 grade provides a hard surface layer that improves wear resistance while maintaining toughness, leading to longer life and more consistent cutting-edge behaviour under typical turning conditions. Which holders are compatible with this ISO insert? Compatibility depends on form, clearance angle, tolerance class, fixation, size and thickness; the WNMG080412-TH fits ISO-standard trigon holders and boring bars that match these parameters. Is the insert suitable for finishing passes? Yes; the 1.2 mm corner radius and the sharp, PVD-coated cutting edge support good surface quality in finishing passes while offering robustness for heavier cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 AH120 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade designed for wear and chipping resistance and the TSF chipbreaker ensures stable chip control and prolonged tool life, keeping turning cycles consistent and efficient. Order the insert directly via Metav Werkzeuge or consult the team for application advice. WNMG 080412 AH120 — Indexable turning insert (trigon), PVD-coated carbide, 1.2 mm radius — Tungaloy The WNMG080412-TSF AH120 is an ISO‑standard trigon indexable insert for external and internal turning, engineered for process stability where a sharp cutting edge and consistent performance are required. ISO-standard trigon format PVD-coated carbide grade AH120 TSF chipbreaker for stable chips 1.2 mm corner radius for robust cutting Optimised cutting edge for stable production The PVD‑coated carbide grade AH120 combines a wear‑resistant substrate with a thin, hard coating to keep the cutting edge sharp under repetitive loads. This results in more consistent dimensional accuracy and surface finish during extended runs. The TSF chipbreaker actively shapes chips to reduce entanglement and clearances in confined setups, which lowers the risk of workpiece damage and interrupts machining far less frequently. These technical choices translate into fewer tool changes and improved overall equipment effectiveness. ISO compatibility and application flexibility As an ISO-standard insert in trigon form, compatibility with holders depends on form, clearance angle, tolerance class, fixing, size and thickness. The 0° clearance angle and 1.2 mm corner radius are suited to operations requiring a strong tip for heavier cuts while maintaining acceptable surface quality; the trigon shape provides three usable cutting edges per index, improving economy. Select the chipbreaker and grade to match the workpiece material, machining strategy and machine–fixture rigidity to achieve the intended process security and repeatability. Practical system integration and economic benefits The insert is designed to work within a standard system: an ISO indexable plate plus a matching external holder or boring bar, backing/shim and clamping screws. This enables fast index changes and simple inventory management. Using a PVD-coated grade with a reliable chipbreaker reduces unplanned stoppages, contributing to lower machining costs per component and predictable scheduling. For workshops aiming to balance productivity with tool life, the model series delivers repeatable results and straightforward handling in everyday turning tasks. Contact Metav Werkzeuge today to discuss the suitability of the Tungaloy WNMG080412-TSF AH120 for specific turning tasks or to request delivery and technical clarification; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6854313 Manufacturer SKU: TUN6854313 Seller SKU: 6854313-Tungaloy Model series: ISO turning indexable inserts Core dimensions Insert designation: WNMG080412-TSF Size: 08 Geometry: trigon Corner radius: 1.2 mm Thickness: 4.76 mm Included angle: 80° Clearance angle: 0° Hole: with cylindrical hole Design & special features Material: carbide (PVD-coated) Grade: AH120 Chipbreaker: TSF ISO-standardised indexable insert Compatibility determined by form, clearance angle, tolerance, fixing, size and thickness FAQ What machining tasks is this insert intended for? The WNMG080412-TSF AH120 is intended for external and internal turning where a sharp edge, process security and reliable chip control are required. Which materials can be machined with this grade and chipbreaker? The AH120 PVD‑coated carbide with the TSF chipbreaker is chosen for general turning applications; the final selection should match the workpiece material, cutting data and machine rigidity. How is the insert mounted and indexed? This ISO‑standard trigon insert is used with a matching external holder or boring bar, plus backing/shim and clamping screws; the trigon form provides multiple usable edges per insert. What do the dimensions 08 and 080412 indicate? Size "08" denotes the insert size class; "080412" refers to the ISO designation that includes size and corner radius details for consistent holder compatibility. Can the insert reduce downtime compared with conventional grades? Yes, the PVD-coated AH120 and TSF chipbreaker are specified to improve wear resistance and chip control, which helps reduce unplanned tool changes and machine stoppages. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 AH120 Wendeplatten - Tungaloy
Reliable machining results from the combination of a PVD-coated carbide AH120 grade for sustained wear resistance and an SA chipbreaker that secures consistent chip control; the trigonal 80° geometry with a 1.2 mm corner radius delivers process security for both external and internal turning. Order the WNMG080412-SA AH120 directly via Metav Werkzeuge or consult our specialists for application advice. WNMG080412-SA AH120 — ISO indexable turning insert for turning, PVD-coated AH120 (Tungaloy) WNMG080412-SA AH120 is an ISO-standard indexable insert designed for reliable external and internal turning in industrial machining environments, compatible with standard holders that accept the WNMG form and dimensions. WNMG geometry for ISO turning holders PVD-coated carbide AH120 for wear resistance SA chipbreaker for stable chip control 80° trigonal insert with 1.2 mm corner radius Durable cutting edge for long production runs The combination of a PVD-coated surface and a carbide substrate provides enhanced wear resistance, extending the interval between index changes and reducing downtime. The AH120 grade is engineered to resist both flank wear and chipping under intermittent loads, which supports predictable tool life and repeatable batch quality. For operations where a sharp cutting edge and consistent performance are central, this configuration reduces scrap rates and contributes to a steady production flow. Predictable chip control for safer machining The SA chipbreaker geometry was selected to promote controlled chip formation during turning, which helps maintain machine uptime and operator safety. A defined chip shape reduces the risk of entanglement and eases chip evacuation from the cutting zone, improving surface finish and preventing workpiece damage. By favouring stable chips, the insert supports higher process reliability and simplifies post-process handling in busy shop-floor conditions. Practical compatibility and integration benefits As an ISO-standard insert with a trigonal plate form and an 80° included angle, the component fits a wide range of external holders and boring bars when matched by form, clearance angle, tolerance class, fastening and thickness. The 1.2 mm corner radius balances edge strength with achievable surface quality, and the presence of a cylindrical hole ensures secure fastening. This system-oriented approach makes the insert easy to incorporate into existing tooling setups, enabling quick changeover and predictable performance in both roughing and finishing turning operations. For reliable high-performance turning choose the Tungaloy WNMG080412-SA AH120; contact Metav Werkzeuge for tailored application support or to request a procurement consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6809777 Manufacturer SKU: TUN6809777 Model series: ISO-Drehwendeschneidplatten Designation: WNMG080412-SA AH120 Facts Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 08 Included angle: 80° Relief angle: 0° Hole: with cylindrical hole Special features PVD-coated carbide grade AH120 SA chipbreaker for stable chip control Trigonal (WNMG) plate form for ISO holders Suitable for external and internal turning Sharp cutting edge with process security Compatibility determined by form, clearance angle, tolerance, fastening, size and thickness FAQ What materials can this insert machine effectively? The WNMG080412-SA AH120 insert, in PVD-coated carbide AH120, is designed for a broad range of turning tasks; its wear-resistant grade and chip control suit many steels and mixed-production contexts where a sharp edge and process security are required. How is the insert secured to the holder? The insert features a cylindrical hole and standard WNMG geometry; fastening follows ISO clamping practices, ensuring stable seating when the correct holder and clamping set are used with the WNMG080412-SA AH120. What is the advantage of the SA chipbreaker on this insert? The SA chipbreaker promotes controlled chip formation and evacuation, which improves surface finish and reduces risk of chip entanglement—benefits that help maintain continuous operation with the AH120 grade insert. Can this insert be used for internal turning as well as external turning? Yes, the trigonal form and the insert’s geometry make it suitable for both external and internal turning applications, provided a compatible boring bar or internal holder is used. Which characteristics determine holder compatibility? Compatibility is defined by the insert form, free/relief angle, tolerance class, fastening method, plate size and thickness; matching those parameters ensures correct fit and stable performance with the WNMG080412-SA AH120. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated AH120 carbide for extended tool life, the trigon 80° geometry for versatile turning, and secure clamping with the cylindrical hole; order directly via Metav Werkzeuge or consult the team for application support. WNMG 080412 AH120 trigon indexable insert for turning — Tungaloy WNMG080412 AH120 is an ISO‑standard trigon turning insert designed for general external and internal turning where a sharp cutting edge and process reliability are required ISO‑standard trigon insert PVD‑coated AH120 carbide grade 0° clearance for sharp cutting edge Double‑sided chipbreaker, with hole Consistent process security through material and coating The insert combines a PVD‑coated carbide body with the AH120 grade to deliver wear resistance and resistance to chipping during turning operations. The coating reduces adhesion and heat buildup, which contributes directly to longer tool life and fewer interruptions for insert changes. For operations where repeatability and surface finish matter, the trigon geometry and a defined 80° included angle provide stable cutting engagement and predictable force direction, supporting steady cycle times on production machines. Clear mounting rules and compatibility for reliable set‑up Compatibility with a toolholder depends on form, free angle, tolerance class, fastening, size and thickness. The 0° clearance angle and the cylindrical mounting hole ensure positive locating and consistent clamping when matched with the correct ISO seat and clamping set. The plate thickness of 4.76 mm and the 1.2 mm corner radius give a balance between rigidity and edge strength. These defined dimensions simplify holder selection and reduce setup variance, which is crucial for batch production and automated cells. Practical selection of chipbreaker and application guidance The insert is double‑sided with a chipbreaker suitable for a variety of steels and common turning cuts; selecting the correct chipbreaker and cutting parameters according to workpiece material and setup stability will yield best results. For roughing, the robust corner radius and grade support higher feeds; for finishing, the sharp edge geometry helps achieve the desired surface quality. The model belongs to the ISO turning insert series and is intended specifically for turning applications where a combination of economy and process stability is required. For application advice and fast supply of Tungaloy WNMG080412 AH120 inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and delivery options Technical Data Article number: 6810498 Manufacturer SKU: TUN6810498 Label: WNMG080412 AH120 Manufacturer: Tungaloy Facts Corner radius: 1.2 mm Thickness: 4.76 mm Included angle: 80° Clearance angle: 0° Size: 08 Special features PVD‑coated carbide Grade: AH120 Plate form: trigon Mounting: with cylindrical hole Chipbreaker: double‑sided Application: turning Model series: ISO turning indexable inserts Typical use: external and internal turning FAQ What materials is this insert suitable for? The WNMG080412 AH120 indexable insert by Tungaloy is intended for a broad range of turning tasks and is recommended where wear resistance and a sharp cutting edge are required; selection of the correct chipbreaker and cutting data depends on the specific workpiece material. How is the insert mounted and located? The insert features a cylindrical mounting hole and ISO trigon form; secure clamping is achieved using a matching holder and clamp set designed for the insert’s size, thickness and tolerance class. What are the key geometric specifications to consider? Important values include the 1.2 mm corner radius, 4.76 mm thickness, 80° included angle and 0° clearance angle; these determine edge strength, rigidity and engagement with the workpiece. Is this insert reversible or single‑use? The insert is double‑sided; both faces can be used in sequence, which extends the effective service life before disposal or reconditioning is required. Which SKU should be ordered for this product? Order the item under manufacturer SKU TUN6810498 or article number 6810498; specify the grade AH120 and the ISO designation WNMG080412 for clarity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
WNMG 080412 AH120 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade and a robust 1.2 mm nose radius delivers reliable edge life and consistent process security for precision turning; order the insert directly via Metav Werkzeuge or contact our advisors for application support. WNMG 080412 AH120 turning insert (Tungaloy) — PVD-coated carbide, 1.2 mm radius WNMG 080412 AH120 is an ISO-format trigon insert designed for external and internal turning with a focus on sharp cutting edges and process reliability. PVD-coated carbide grade AH120 for wear resistance ISO WNMG080412 trigon insert for turning operations 1.2 mm nose radius for robust edge strength Double-sided chipbreaker and cylindrical hole Consistent process stability for precision turning A PVD-coated carbide grade such as AH120 provides a balance between wear resistance and edge toughness, ensuring steady performance in repetitive turning cycles. The insert’s trigon geometry combined with an 80° approach angle supports secure engagement during both external and internal operations, while the specified 0° relief angle maintains the effective cutting geometry for applications where a sharp cutting edge and repeatable results are required. This configuration reduces unexpected tool changes and contributes to a smoother production flow. Prolonged edge life through geometry and coating The combination of coating and form extends usable life: the PVD layer decreases abrasive wear and helps prevent built-up edge, while the 1.2 mm nose radius strengthens the cutting edge against chipping under interrupted cuts. A plate thickness of 4.76 mm and a double-sided chipbreaker enhance structural rigidity and allow the insert to be indexed twice, which improves cost-effectiveness per cutting edge. These features translate into fewer tool changes and more predictable component quality across series production. Fast integration into ISO tooling systems The ISO-based design ensures compatibility with a wide range of holders when matching is made by form, relief angle, tolerance class, clamping method, size and thickness. The insert is supplied with a cylindrical hole, suitable for positive clamping systems and standard screw or clamp fixtures; a matching shim and screw set complete the typical assembly. Specifying ISO-conformant components simplifies procurement and reduces setup complexity on the shop floor, supporting faster tool changeovers and less downtime. Best-use recommendations and practical advantages Choose this insert for turning tasks that demand a sharp cutting edge and a high level of process security. The double-sided chipbreaker allows adaptation to different chip formation needs; select the chipbreaker style and the AH120 grade to match the workpiece material and cutting conditions. For stable, repeatable machining in batch production, the insert’s geometry and coating provide a good compromise between surface finish consistency and tool life, improving throughput and lowering tooling costs over time. The Tungaloy grade is especially useful where predictable performance under varied cutting conditions is a priority. For application-specific advice or to request compatible holders and accessories, contact Metav Werkzeuge — specialists for Tungaloy inserts at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6809790 Manufacturer SKU: TUN6809790 Type / designation: WNMG080412 Grade: AH120 Material: Carbide Coating: PVD Nose radius: 1.2 mm Relief angle: 0° Cutting angle: 80° Thickness: 4.76 mm Shape: trigon Size: 08 Hole: cylindrical hole Chipbreaker: double-sided FAQ What holders are compatible with this insert? Compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness; the WNMG080412 AH120 Tungaloy insert (SKU 6809790-Tungaloy) fits ISO-compatible trigon holders designed for the 08 size and 4.76 mm plate thickness. For which turning tasks is this grade recommended? The AH120 PVD-coated grade is intended for turning operations where a sharp cutting edge and stable process behaviour are required, offering improved wear resistance and resistance to chipping in repetitive machining. What benefits does the PVD coating provide? A PVD coating on a carbide substrate increases wear resistance and reduces adhesion of material to the cutting edge, which helps maintain surface finish and extend the usable life of the WNMG080412 insert. How is the insert mounted in the tool assembly? The insert uses a cylindrical hole for positive clamping; secure the plate with the correct clamp or screw and a suitable shim, ensuring the holder matches the ISO WNMG form and the specified plate thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade AH6225, a sharp yet stable cutting edge, and ISO conformity for reliable turning of rostfreier Stahl; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific setup. WNMG 080412 AH6225 — ISO turning insert for turning, PVD-coated carbide (Tungaloy) WNMG080412-DM AH6225 provides an ISO-standard trigon insert intended for medium turning operations on rostfreier Stahl and similar alloys ISO 80° trigon form for stable positioning PVD-coated carbide AH6225 for rostfreier Stahl Corner radius 1.2 mm for edge robustness Cylindrical hole for standard holder compatibility Consistent cutting performance for medium turning tasks The WNMG080412-DM AH6225 is engineered as an ISO-compliant turning indexable insert that combines a PVD-coated surface with a carbide substrate to deliver repeatable cutting results. The AH6225 grade is formulated as a universal option for rostfreier Stahl, designed to offer a sharp, yet stable cutting edge under varying process conditions. The PVD layer increases wear resistance and reduces built-up edge formation, which helps to maintain dimensional stability over longer tool life. For production environments seeking predictable tool change intervals and consistent part quality, this composition supports improved process control and lower scrap rates. Easy integration into existing tooling systems Designed to ISO geometry, the trigon 80° form and cylindrical hole ensure straightforward compatibility with many standard external holders and boring bars; the insert sits securely and repeatably, which simplifies setup and reduces downtime. Attention to form, 0° clearance, tolerance class, fastening method, size and thickness determines fit — the insert’s 4.76 mm plate thickness and size 08 follow industry norms. Specifying an insert with known ISO sizing reduces guesswork when replacing worn cutters across a fleet of machines, allowing toolrooms to standardise toolholders and spare parts for efficient inventory management. Improved productivity and process reliability The DM chipbreaker geometry is tuned to promote stable chip formation when machining rostfreier Stahl, helping to avoid long, stringy chips and reducing the risk of workpiece surface damage. Stable chip control together with a resilient corner radius of 1.2 mm and the grade’s balanced edge stability reduces vibration and supports better surface finish, which in turn lowers rework. The combined effect is a measurable contribution to machining efficiency: fewer interruptions, predictable tool life and a smoother production flow — advantages that translate directly into operational savings. Practical handling guidance and selection advice For practical use, choose the AH6225 grade and the DM chipbreaker where medium cutting depths and variable cutting conditions are expected on rostfreier Stahl. The insert’s trigon shape distributes cutting forces across the edge, making it suitable for both external and internal turning applications. When selecting cutting parameters, start conservatively and adjust feed and speed to suit machine rigidity and part geometry; the PVD coating tolerates moderate increases in speed while preserving edge integrity. If clarification is required on matching the insert to a particular holder or optimising cutting data, technical advice is available to ensure the chosen solution meets productivity and surface finish targets. Contact Metav Werkzeuge for a tailored tool recommendation and procurement of genuine Tungaloy WNMG080412-DM AH6225 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for consultation and order support Technical data Article number: 6947611 SKU: 6947611-Tungaloy Manufacturer SKU: TUN6947611 Manufacturer article number: 6947611 Designation: WNMG080412-DM AH6225 Series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Facts Corner radius: 1.2 mm Plate thickness: 4.76 mm Insert angle: 80° ISO code: 080412 Size: 08 Special features Material: carbide Coating: PVD Chipbreaker: DM Plate shape: trigon Hole: with cylindrical hole Clearance angle: 0° Application: Turning, suitable for rostfreier Stahl FAQ What materials is this insert best suited for? The WNMG080412-DM AH6225 insert from Tungaloy is specified as a universal grade for rostfreier Stahl and performs well in medium turning operations on that material group. How does the AH6225 PVD coating improve performance? The PVD-coated carbide AH6225 enhances wear resistance and reduces built-up edge tendency on rostfreier Stahl, extending effective tool life and stabilising surface finish during machining. Will this insert fit my existing ISO toolholders? The insert follows ISO geometry (080412) with an 80° trigon form and a cylindrical hole, so compatibility depends on holder form, fastening method, size and plate thickness; the listed dimensions should match common ISO holders. What does the DM chipbreaker do for chip control? The DM chipbreaker on this insert is optimised for controlled chip formation when machining rostfreier Stahl, helping to produce short, manageable chips and reducing the chance of surface damage. Can this grade handle interrupted cuts or variable conditions? AH6225 provides a balance between a sharp cutting edge and edge stability, making it suitable for variable conditions and many medium-duty turning scenarios; however, machine rigidity and cutting data should be reviewed for heavy interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
WNMG 080412 AH6225 Wendeplatten - Tungaloy
WNMG 080412 AH6225 – ISO-Drehwendeschneidplatte für Drehen, Hersteller Tungaloy Die WNMG 080412 AH6225 ist eine ISO-genormte Trigon-Wendeschneidplatte aus PVD-beschichtetem Hartmetall, ausgelegt für das Drehen von rostfreien Stählen bei mittleren Schnitttiefen und wechselnden Bedingungen. Universelle Sorte für rostfreie Stähle PVD-beschichtetes Hartmetall für hohe Standzeit Trigonform mit 80° für stabile Außenbearbeitung Zylindrisches Loch, kompatibel mit gängigen Haltern Eckenradius 1,2 mm für feinere Schneidkanten Hohe Standzeit durch PVD-Beschichtung und Hartmetallqualität Die Kombination aus Hartmetall und PVD-Beschichtung sorgt für eine deutlich erhöhte Verschleißresistenz und eine konstante Schneidkantenstabilität. Durch die Sorte AH6225 entsteht eine scharfe, zugleich stabile Schneidkante, die gerade bei wechselnden Schnittbedingungen ihre Vorteile ausspielt. Das Ergebnis ist eine verlängerte Werkzeugstandzeit und weniger Maschinenstillstand durch häufigen Plattenwechsel. Präzise Bearbeitung von rostfreien Stählen dank Spanformer SM Für das Bearbeiten von rostfreien Stählen bietet der SM-Spanbrecher eine zuverlässige Spanbildung und erleichtert die Spanabfuhr bei wechselnden Schnittbedingungen. Die Platte ist für mittlere Bearbeitungen optimiert, wodurch sich eine gute Oberflächengüte und formstabile Konturen erreichen lassen. Anwender profitieren von reproduzierbaren Ergebnissen bei Serien- und Einzelteilfertigung. Kompatible Form und durchdachte Geometrie für einfache Integration Die WNMG-Platte entspricht ISO-Normen und ist in Trigonform gefertigt; die Angabe mit Loch und das zylindrische Befestigungsloch erlauben eine einfache Montage auf gängigen Außenhaltern und Bohrstangen. Die Plattendicke von 4,76 mm sowie der Winkel von 80° tragen zur Stabilität der Schneidkante bei und vereinfachen die Auswahl passender Halter unter Berücksichtigung von Form, Freiwinkel und Toleranzklasse. Zielgruppe und empfohlene Einsatzgebiete Diese Wendeschneidplatte richtet sich an industrielle Werkstätten und Fertigungsbetriebe, die rostfreie Stähle bearbeiten und Wert auf Prozesssicherheit sowie Wirtschaftlichkeit legen. Besonders geeignet ist die Platte für Betriebe mit wechselnden Losgrößen, die eine universelle Sorte mit robustem Spanverhalten und guter Standzeit benötigen. Empfehlung: Für zuverlässige Bearbeitung rostfreier Stähle empfehlen wir die AH6225-Sorte von Tungaloy; bei Bedarf fachliche Beratung und Bestellmöglichkeit unter info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 6796316 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Bezeichnung: WNMG080412-SM AH6225 SKU: TUN6796316 Fakten Eckenradius: 1,2 mm Winkel: 80° Freiwinkel: 0° Plattendicke: 4,76 mm ISO-Code: 080412 Plattengröße: 08 Besonderheiten Material: Hartmetall Beschichtung: PVD-beschichtet Sorte: AH6225 Spanbrecher: SM (Spanbrecher für mittlere Schnitte, universell) Plattenform: trigon Loch: mit Loch (zylindrisches Loch) Anwendung: Drehen Einsatzgebiet: rostfreie Stähle FAQ Was macht die Sorte AH6225 besonders? Die AH6225-Sorte von Tungaloy (WNMG080412-SM AH6225, SKU TUN6796316) kombiniert eine scharfe Schneidkante mit ausreichender Kantenschärfe für wechselnde Bedingungen, was zu hoher Wirtschaftlichkeit und stabiler Spanbildung beim Drehen von rostfreien Stählen führt. Für welche Werkstoffe ist diese Wendeschneidplatte geeignet? Primär ist die WNMG080412-SM AH6225 für rostfreie Stähle ausgelegt; die Platte bietet gute Standzeiten und Spanführung speziell bei diesen Werkstoffen. Passt die Platte auf vorhandene Halter? Die Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke ab. Die WNMG-Trigonform und das zylindrische Loch entsprechen ISO-Standards, sodass die Platte mit vielen handelsüblichen Außenhaltern kompatibel ist, wenn die Haltergeometrie übereinstimmt. Welche Vorteile bietet der SM-Spanbrecher? Der SM-Spanbrecher sorgt für kontrollierte Spanbildung bei variierenden Schnittbedingungen und erleichtert die Spanabfuhr; dadurch verbessert sich die Prozesssicherheit bei mittleren Bearbeitungen. Wie beeinflusst der Eckenradius das Ergebnis? Der Eckenradius von 1,2 mm ermöglicht eine feinere Schneidkante, die zur verbesserten Oberflächengüte beiträgt und gleichzeitig eine gute Kantenschärfe für längere Standzeiten bietet. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com